Cisco | 804 | Cisco 800 Series

Cisco 801-805 — ISDN, Serial, and IDSL Routers
Product Overview
The Cisco 800 series router offers enhanced network security and reliability through the power of Cisco IOS technology
tailored for small offices and telecommuters.
Cisco 800 series routers extend the power of Cisco IOS technology to small offices and corporate telecommuters. With
Integrated Services Digital Network (ISDN), ISDN Digital Subscriber Line (IDSL), and serial models, the Cisco 800 series
of routers addresses virtually all WAN services required by small offices and telecommuters. Cisco IOS technology offers
enhanced security, reliability, and safe investment with low cost of ownership to enable customers to benefit from the Internet
economy by increasing productivity, simplifying communication, and reducing costs. The Cisco 800 series enables
customers to benefit from value-added services such as managed network services, virtual private networks (VPNs), point of
sale (POS) applications, and secure Internet access.
11665
Figure 20-44: Cisco 800 Series, front view
NT1 LED on
Cisco 804 router only
Figure 20-45: Cisco 800 Series, rear view
Ethernet port
Connect Ethernet
network device.
HU
LINK NOB
HU
B
ETHERN
ET
ISDN BRI S/T port
Connect to external
NT1 or ISDN wall jack.
Cisco 80
1
CONSOL
E
10 BASE
Cable lock
Use cable
lock to
physically
secure
router.
Power switch
l = On.
= Standby or no power output.
ISDN S/T
T
HUB/NO HUB button
(for Ethernet port)
Console port
Determines cable
Connect PC or
type for Ethernet
terminal.
device connection.
11666
Link LED
Indicates state
of Ethernet
port. On when
connected.
Locking power
connector
Connect power
supply.
Key Features and Benefits
The Cisco 800 Series includes four ISDN routers, one serial router, and two IDLS router models and a choice of software
feature sets. The Cisco 801 model provides an ISDN Basic Rate Interface (BRI) ST interface for use worldwide. The
Cisco 802 adds the integrated NT1 network termination device for use in North America. The Cisco 803 and 804 models add
a four-port Ethernet hub and two RJ-11 interfaces for telephone devices such as telephones, fax machines, and modems. The
Visit Cisco Connection Online at www.cisco.com
1
Cisco 805 offers one serial port for synchronous serial connections or asynchronous dial up connections with an external
modem. For IDSL connections, the Cisco 802 IDSL provides one IDSL port with one Ethernet port and the Cisco 804 IDSL
adds an integrated 4-port Ethernet hub.
The Cisco 803 and 804 models also support supplementary telephone services such as call waiting, call-waiting cancel, call
hold, call retrieve, three-way conferencing, and call transfer (if these services are supported by a users telephone company).
For North American users, the Cisco 804 supports caller ID out the POTS port. Field upgradable Flash and DRAM memory
in all Cisco 800 Series models protect equipment investments as technologies and networking requirements change.
•
Support for WAN Technologies
The Cisco Series 801 through 804 supports ISDN switched, leased line connections, Always on Dynamic ISDN (AODI),
X.25 over ISDN D channel, Bandwidth Allocation Control Protocol (BACP), Multilink Point-to-Point Protocol (MLPPP), Compression Control Protocol (CCP) compression (up to 4:1), and Bandwidth on Demand (BOD) with load
balancing for links up to 128 kbps, for effective throughput up to 512 kbps.
The Cisco Series 802 IDSL and 804 IDSL also supports IDSL which offers high-speed digital connections over an ISDN
infrastructure and supports line rates up to 144 kbps. IDSL dramatically expands the reach of DSL connectivity for those
customers who are outside the Service Provider’s range for DSL or for those who are unable to qualify for DSL
connections. IDSL supports VPN connections for telecommuting and branch offices as well as small businesses who need
fast, reliable Internet access.
The Cisco 805 supports both synchronous serial connections and asynchronous dial connections, synchronous
connections include Frame Relay, leased line, X.25 up to speeds of up to 512 kbps. When using asynchronous dialup with
an external modem, the Cisco 805 only connects to the Internet when required, and then immediately disconnects when
the line is no longer being used, minimizing per-minute usage charges. Access control lists make sure that only important
traffic initiates the Internet connection, further increasing the cost savings. The advanced routing protocols of the
Cisco 805, including Snapshot and triggered RIP, ensure routing table information is exchanged efficiently; and STAC
compression increases total throughput. Asynchronous serial speeds up to 115.2 kbps.
•
Integrated CAPI Support for for European Markets
The Cisco 801-1RCAPI and Cisco 803-1RCAPI series models are designed to take full advantage of popular European
ISDN services. Integrated support for common application programming interface (CAPI) applications provides access
to services such as faxing and online banking and a range of leading Internet service providers.
Cisco 800 series Internet access devices are available with one-user or five-user RVS-COM Lite licenses, for access to
all RVS-COM applications and CAPI applications. And since the CAPI 2.0 driver is built into the Cisco 800 series, there
is no need to purchase separate software for your server.
CAPI is an application programming interface standard used to access ISDN equipment connected to basic rate interfaces
(BRIs) and primary rate interfaces (PRIs). Using a Cisco 800 series with RVS-COM Lite software provides a truly shared
network environment and other benefits including: Soft fax (for analog and digital lines) for use with software such as
AVMs Fritz!32, Symantec WinFax Pro, and RVS-COM Lite 1.6: Soft modem for e-mail and Web access to Internet
service providers such as T-Online and CompuServe File and Euro-File Transfer Electronic banking and shopping with
German T-Online Third-party CAPI-compliant applications. For further details on the CAPI standard, visit this URL:
http://www.capi.org.
•
Security
To leverage the unprecedented opportunities offered by communications and commerce over the Internet, private
information must remain secure. Cisco Secure Integrated Software provides many technologies to build a custom security
solution. The elements of security services include perimeter security, identity, monitoring, privacy, firewalls, IPSec
encryption, and VPNs.
— Standard Security
Perimeter security refers to the control of traffic entry and exit between network boundaries, such as between private
networks, intranets, extranets, or the Internet. Cisco IOS perimeter security technologies provide a highly flexible,
superior solution with features such as:
Standard and extended ACLs
Lock and Key (dynamic ACLs)
2 Cisco Product Catalog, April, 2001
Router/route authentication, authorization, and accounting (such as Password Authentication Protocol [PAP]/
Challenge Handshake Authentication Protocol [CHAP])
Network Address Translation (NAT)
Token Card authentication with Cisco Secure authentication
NAT eliminates the need to re-address all hosts with existing private network addresses and hides internal addresses
from public view. For businesses that want to allow selected access to the network, NAT can be configured to allow
only certain types of data requests such as Web browsing, e-mail, or file transfers.
— Enhanced Security
Dynamic Firewall — Companies increasingly rely on internal networks and servers for accessing company data. To
leverage the Internet as a key business tool, companies must connect their internal networks to the Internet while
keeping sensitive internal data secure. Company data can be protected against unauthorized access with stateful
firewalls. The integrated Cisco IOS Firewall Feature Set is a stateful firewall that provides:
Stateful (dynamic) ACLs (application/context based)
Java blocking
Denial of service attack detection and prevention
Real-time alerts and audit trails
Dynamic firewalls provide these vital enhanced security features. The term firewall is used by many vendors but not
uniformly referred to as stateful firewalls. Firewalls that are not dynamic do not provide these enhanced security
features.
•
Encryption and Tunneling
The Cisco 800 series routers provide IPSec encryption technology to enable small offices and telecommuters to deploy
VPNs. IPSec encryption provides privacy, integrity, and authenticity for transmission of sensitive information over the
Internet. The unique end-to-end Cisco offering allows customers to implement IPSec encryption transparently into the
network without affecting individual PCs. The 800 series with IPSec encryption allows significant cost savings by using
the Internet to create secure connections between small offices and teleworkers. As a component of the Cisco VPN
solution, the Cisco 800 series supports:
IPSec tunneling with data encryption standard (DES)
Layer-2 Tunneling Protocol (L2TP)
Generic Routing Encapsulation (GRE)
•
Manageability
The Cisco 800 Series supports management by a wide range of platforms and applications. Cisco ConfigMaker and
Cisco Fast Step (Windows 95, 98, and NT 4.0), and CiscoView (UNIX) applications provide superior capabilities for
configuration and security management, as well as performance and fault monitoring. The Cisco 800 Series supports
centralized administration and management via Simple Network Management Protocol (SNMP), Telnet, or local
management through the router’s console port.
•
X.25 over the D Channel
The Cisco 800 Series supports International Telecommunications Union (ITU)-compliant X.25 service over the ISDN D
channel. With this feature, the Cisco 800 Series cost-effectively supports transaction-oriented applications such as pointof-sale (POS) authorizations. The X.25 feature also allows users to take advantage of unused capacity on the D channel.
The always on dynamic ISDN (AODI) technology in Cisco IOS software allows users to minimize call charges by
initiating the lower-bandwidth D channel in always-on mode when a user makes an ISDN connection. AODI activates
the more costly B channel only when a specific transmission requires more bandwidth. In addition, the Cisco 800 Series
X.25 feature includes priority queuing to improve the responsiveness of traffic over this link.
•
Dynamic Addressing
Visit Cisco Connection Online at www.cisco.com
3
Workstations on the remote LAN can be assigned IP addresses dynamically by either the central network or the Cisco
800 Series router using the Internet-standard Dynamic Host Configuration Protocol (DHCP). The Cisco 800 Series
implements both a DHCP relay agent and a DHCP server, giving network administrators a choice of mechanisms for
assigning IP addresses to the routers and workstations.
•
Easy to Set Up
Each Cisco 800 Series router includes Cisco Fast Step, an easy-to-use Windows 95, 98, and NT 4.0-based software tool
that simplifies the setup, monitoring, and troubleshooting of Cisco routers. The Cisco Fast Set setup application leads
users through simple, step-by-step, wizards-based procedures to configure Cisco routers connected to an Internet service
provider and remote corporate network. Cisco Fast Step includes the Cisco Fast Step monitor application which provides
users with router LAN and WAN performance statistics, fault alarms, and troubleshooting assistance.
The Cisco 800 Series routers also support configuration with the Cisco ConfigMaker application. A Windows 95, 98, and
NT 4.0-based software tool, the Cisco ConfigMaker is designed to configure a small network of Cisco routers, switches,
hubs, and other network devices from a single PC. Cisco ConfigMaker is designed for resellers and network
administrators of small and medium-sized businesses who are proficient in LAN and WAN fundamentals and basic
network design.
The Cisco 800 IDSL models include DSL Connection Kits. The Cisco 800 DSL Connection Kit includes the Cisco Fast
Step application with two configuration templates for simplified installation and set up.
For additional setup ease, the Cisco 800 Series includes color-coded ports and cables to help users make proper
connections. A Quick Product Reference Guide documentation provides easy-to-follow installation instructions.
•
Virtual Private Network Services for Telecommuters
A virtual private network (VPN) connects private networks and telecommuters by using a public network (such as the
Internet), but provides services and capabilities that seem like those offered by dedicated private lines. For VPNs to
provide the same benefits as dedicated lines, they must offer similar levels of security and quality to guarantee availability.
As implemented in Cisco 800 Series routers, industry standard IPSec encryption offers a complete solution to
telecommuters for secure remote access to VPNs, with mission-critical reliability and availability.
•
All-in-One Solution
The Cisco 803 and 804 models provide an all-in-one solution with a four-port Ethernet hub and two POTS interfaces,
which enable users to meet their needs for data, telephone, and fax networking with one device. Now small offices and
corporate telecommuters can reduce telephone line charges by combining their data, telephone, and fax communications
on a single ISDN line. With one of these Cisco 800 series models, users can simultaneously use the Internet, receive a
fax, or make a phone call while reducing the expense of multiple telephone lines.
Product Features
•
Security
NAT, creates a private network and an additional layer of network security
PAP, CHAP, MS-CHAP, D channel dialback, caller ID, and ACLs, TACACS+ protect network resources from
unauthorized access
Route and router authentication, Cisco IOS Firewall feature set, IPSec encryption, and GRE tunneling
•
Manageability
Dynamic IP addresses for the Cisco 800 Series router and the remote workstations, to ease configuration and network
management
Automatic service profile identifier (SPID) and automatic detection of the ISDN switch using Cisco Fast Step
Remote management and monitoring via SNMP or Telnet; local management via console port
Remote debug capability using syslog
•
Networking Efficiency and Cost Control
Advice-of-charge mode and permanent ISDN connections
4 Cisco Product Catalog, April, 2001
Dial-on-demand routing (DDR), dials the ISDN line only when needed, then automatically terminates the connection at
the end of a user’s session
Multilink PPP (MP) for standards-based B-channel aggregation (RFC 1717) and Bandwidth Allocation Control Protocol,
for obtaining bandwidth on demand
ISDN lease line in Japan and Germany; Frame Relay encapsulation over ISDN leased line
Snapshot routing for IP and Internetwork Packet Exchange (IPX), prevents the ISDN line from being dialed only to
exchange periodic routing updates
Industry-standard Stac data compression for throughput of up to 512 kbps
ACLs by time of day
X.25 D-channel packet data for maximum use of all available bandwidth
•
Ease of Use
Analog telephone interfaces for sharing the ISDN BRI line with devices such as standard telephones, fax machines, and
modems (Cisco 803 and 804 only)
Support for supplemental telephone features such as caller ID (North America), call transfer, call conference, call hold,
call retrieve, and call waiting (if offered by a user’s telephone company)
Cisco Fast Step software for simplified installation from Windows 95, 98 or NT 4.0 operating systems
Distinctive ringing (Cisco 803 and 804 only)
Specifications
Hardware
Table 20-121: Technical Specifications for Cisco 800 Series
Cisco 801
Cisco 802
Cisco 803
Cisco 804
Cisco 805
Cisco 802
IDSL
Cisco 804
IDSL
ISDN
ISDN
ISDN
ISDN
Serial
IDSL
IDSL
Worldwide
North America
Worldwide
North America
Worldwide
North America
North America
Model
MPC 850
MPC 850
MPC 850
MPC 850
MPC 850
MPC 850
MPC 850
Speed
33 MHz
33 MHz
33 MHz
33 MHz
33 MHz
33 MHz
33 MHz
Default
DRAM1
4 MB
4 MB
4 MB
4 MB
8 MB
4 MB
4 MB
Max
DRAM
12 MB
12 MB
12 MB
12 MB
16 MB
12 MB
12 MB
Default
FLASH2
8 MB
8 MB
8 MB
8 MB
4 MB
8 MB
8 MB
Max
FLASH
12 MB
12 MB
12 MB
12 MB
12 MB
12 MB
12 MB
Yes
n/a
n/a
n/a
Description
Supported
interface
WAN
Market
Processor
Memory
NT-1
Telephone
Ethernet
Yes
Analog
Ports
n/a
n/a
RJ-11
RJ-11
n/a
n/a
n/a
REN
n/a
n/a
5
5
n/a
n/a
n/a
Caller ID
n/a
n/a
North America
Only
North America
Only
n/a
n/a
n/a
10BaseT
10BaseT
4-port 10BaseT
4-port 10BaseT
10BaseT
10BaseT
4-port 10BaseT
Visit Cisco Connection Online at www.cisco.com
5
Cisco 801
Cisco 802
Cisco 803
Cisco 804
Cisco 805
Cisco 802
IDSL
Cisco 804
IDSL
Connection
RJ-45
RJ-45
RJ-45
RJ-45
RJ-45
RJ-45
RJ-45
LEDs
11
12
17
18
8
12
16
Locking
slot
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Hub/No
Hub Button
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Description
Console
Front Panel
LEDs
System:
RDY; NT1,
LINE
RDY; NT1,
LINE
Ethernet
Channel 1
CH1, RXD,
TXD
Channel 2
CH2, RXD,
TXD
Telephone
Phone 1 and
phone 2
Phone 1 and
phone 2
Link
Four Ethernet
link
Four Ethernet
link
Four Ethernet
link
Table 20-122: Power Requirements for Cisco 800 Series
Description
Cisco 801
Cisco 802
Cisco 803
Cisco 804
Cisco 805
Cisco 802
IDSL
Cisco 804
IDSL
Type
external/
universal
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
US
110 VAC,
60 Hz
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
UK and Singapore
240 VAC,
50 Hz
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Europe
220 VAC,
50 Hz
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Japan
100 VAC, 50/
60 Hz
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Table 20-123: Physical and Environmental Specifications for Cisco 800 Series
Description
Cisco 801
Cisco 802
Cisco 803
Cisco 804
Cisco 805
Cisco 802
IDSL
Cisco 804
IDSL
Operating Temperature
32 to 104˚F
(0 to 40˚C)
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Storage Temperature
-4 to 149˚F
(-20 to 65˚C)
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Humidity, operating
10 to 85%
noncondensing
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
AC input current
0.2 to 0.4A
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Frequency
50 to 60 Hz
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Dimensions (H x W x D)
1.6 x 8.3 x
9.6 in.
(4.1 x 21.1 x
24.4 cm)
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
Same as
Cisco 801
6 Cisco Product Catalog, April, 2001
Description
Cisco 801
Cisco 802
Cisco 803
Cisco 804
Cisco 805
Cisco 802
IDSL
Cisco 804
IDSL
Weight
1.39 lbs
(.63 kg)
1.42 lbs
(.64 kg)
1.44 lbs
(.65 kg)
1.45 lbs
(.66 kg)
1.45 lbs
(.66 kg)
1.42 lbs (.64
kg
1.45 lbs
(.66 kg)
Cisco 802
IDSL
Cisco 804
IDSL
Table 20-124: Regulatory Approvals for Cisco 800 Series (all models except where noted)
Description
Cisco 801
Cisco 802
Cisco 803
Cisco 804
CE
IEC 801-2, 801-3, 801-4, 801-5
CISPRB, CSA, EN 41003, EN 60950
FCC Part 15 Class B, Part 68
JATE, ST/PAB/ETR/384, TUV, UL VCCI 2
ISDN BRI Support
Single and multipoint configurations
Compatible with data or voice B channel
ISDN Switch Type
Lucent 5ESS
Nortel DMS-100
National ISDN-1 (NI-1)
I-CTR3 (ETSI, NET/3)
VN3/4/5 (France)
1TR6 (Germany)
INS, HSD 64 and 128 (Japan)
TPH (Australia)
Analog Telephone
(Cisco 803 and 804 only)
Telephones: DTMF only (touchtone only, no pulse)
Group III facsimile: V.17, V.27 TER, V.29
Modems: V.22, V.22bis, V.32, V.32bis, V.34
Dial tone (400 Hz) provided outside of North America
Ringer equivalency number (REN) = 4.7
2 B + 1D channels: 2 x 64 Kbps (pre-compressed)
Interoperable Switched 56: 2 x 56 Kbps (pre-compressed)
Cisco 805
Software
For software specification information, access Cisco Connection Online at http://www.cisco.com
Visit Cisco Connection Online at www.cisco.com
7
Ordering Information
Where to buy Cisco products
Visit http://www.cisco.com/public/ordering_info.shtml
Product and Part Numbers
Part Numbers for the Cisco 801-805
Part Description
Part Number
Cisco 800 Series Products
ISDN/Ethernet Router
CISCO801
ISDN BRI/ETHERNET ROUTER
CISCO802
Cisco 802 IDSL Router with Internet DSL
CISCO802-IDSL
ISDN BRI/ETHERNET ROUTER,
4PORT HUB, 2 POTS
CISCO803
Cisco 803 with IP Plus Software
CISCO803-BT1
ISDN BRI/ETHERNET ROUTER, NT-1,
4-PORT HUB, 2 POTS
CISCO804
Cisco 804 IDSL Router with Internet DSL
CISCO804-IDSL
Cisco 805 Ethernet/Serial Router
CISCO805
ISDN Ethernet router with integrated Japan
DSU
CISCO811
ISDN/Ethernet router with integrated 4
port hub & Japan DSU
CISCO813
Cisco 826 ADSL router (co-existing with
ISDN local loops)
CISCO826
Cisco 827 ADSL router 1E, 1ADSL
CISCO827
Cisco 827-4V ADSL router 1E, 1ADSL, 4
Voice
CISCO827-4V
Cisco 800 Series Memory Options
CISCO 801-804 4MB TO 8MB FLASH
FACTORY UPGRADE
MEM800-4U8F
Cisco 800 8MB to 12MB Flash Factory
Upgrade
MEM800-8U12F
CISCO series 8MB FLASH MINI-CARD
MEM800-8F=
CISCO 801-804 4MB TO 8MB DRAM
FACTORY UPGRADE
MEM800-4U8D
CISCO 801-804 4MB TO 12MB DRAM
FACTORY UPGRADE
MEM800-4U12D
CISCO 800 series 4MB DRAM DIMM
MEM800-4D=
CISCO 800 series 8MB DRAM DIMM
MEM800-8D=
Cisco 805 4-MB to 12-MB Flash factory
upgrade
MEM805-4U12F
Cisco 805 4-MB to 8-MB Flash factory
upgrade
MEM805-4U8F
Cisco 805 8-MB to 12-MB DRAM factory
upgrade
MEM805-8U12D
Cisco 805 8-MB to 16-MB DRAM factory
upgrade
MEM805-8U16D
8 Cisco Product Catalog, April, 2001
Part Description
Part Number
4MB to 12MB Flash Upgrade
MEM81X-4U12F
8MB to 16MB DRAMUpgrade
MEM81X-8U16D
Cisco 820 DRAM upgrade 16Mbyte20Mbyte
MEM820-16U20D
Cisco 820 DRAM upgrade 16Mbyte24Mbyte
MEM820-16U24D
Cisco 820 DRAM upgrade 16Mbyte32Mbyte
MEM820-16U32D
Cisco 820 DRAM 24Mbyte upgrade to 32
Mbytes
MEM820-24U32D
Cisco 800 Series Cables
Cisco 800 spare cabling kit (ethernet,
console, ISDN)
CAB-800=
RS-232 Cable, DCE Female to Smart
Serial, 10 Feet
CAB-SS-232FC
RS-232 Cable, DCE Female to Smart
Serial, 10 Feet
CAB-SS-232FC=
RS-232 Cable, DTE Male to Smart Serial,
10 Feet
CAB-SS-232MT
RS-232 Cable, DTE Male to Smart Serial,
10 Feet
CAB-SS-232MT=
RS-449 Cable, DCE Female to Smart
Serial, 10 Feet
CAB-SS-449FC
RS-449 Cable, DCE Female to Smart
Serial, 10 Feet
CAB-SS-449FC=
RS-449 Cable, DTE Male to Smart Serial,
10 Feet
CAB-SS-449MT
RS-449 Cable, DTE Male to Smart Serial,
10 Feet
CAB-SS-449MT=
RS-530A Cable, DTE Male to Smart
Serial, 10 Feet
CAB-SS-530AMT
RS-530A Cable, DTE Male to Smart
Serial, 10 Feet
CAB-SS-530AMT=
RS-530 Cable, DTE Male to Smart Serial,
10 Feet
CAB-SS-530MT
RS-530 Cable, DTE Male to Smart Serial,
10 Feet
CAB-SS-530MT=
V.35 Cable, DCE Female to Smart Serial,
10 Feet
CAB-SS-V35FC
V.35 Cable, DCE Female to Smart Serial,
10 Feet
CAB-SS-V35FC=
V.35 Cable, DTE Female to Smart Serial,
10 Feet
CAB-SS-V35FT
V.35 Cable, DTE Female to Smart Serial,
10 Feet
CAB-SS-V35FT=
V.35 Cable, DCE Male to Smart Serial, 10
Feet
CAB-SS-V35MC
V.35 Cable, DCE Male to Smart Serial, 10
Feet
CAB-SS-V35MC=
V.35 Cable, DTE Male to Smart Serial, 10
Feet
CAB-SS-V35MT
V.35 Cable, DTE Male to Smart Serial, 10
Feet
CAB-SS-V35MT=
Visit Cisco Connection Online at www.cisco.com
9
Part Description
Part Number
X.21 Cable, DCE Female to Smart Serial,
10 Feet
CAB-SS-X21FC
X.21 Cable, DCE Female to Smart Serial,
10 Feet
CAB-SS-X21FC=
X.21 Cable, DTE Male to Smart Serial, 10
Feet
CAB-SS-X21MT
X.21 Cable, DTE Male to Smart Serial, 10
Feet
CAB-SS-X21MT=
Cisco 800 Series Spare and
Accessories
Cisco 801-804 Universal, External AC
Power Supply
PWR-800-WW1
Cisco 800 Universal, External AC Power
Supply Spare
PWR-800-WW1=
Cisco 805 universal, external AC power
supply, spare
PWR-805-WW1=
Cisco 820 Series Universal, External AC
Power Supply
PWR-820-WW1
Cisco 800 Series IOS Software
Options
Cisco 800 Series IOS IP/IPX/FW PLUS
IPSEC 56
S800BHL-12104
Cisco 800 Series IOS IP/IPX/FW PLUS
IPSEC 56
S800BHL-12105
Cisco 800 Series IOS IP/IPX/FW PLUS
IPSEC 56
S800BHL-12105=
Cisco 800 Series IOS IP/IPX PLUS
S800BP-12105
Cisco 800 Series IOS IP/IPX PLUS
S800BP-12105=
Cisco 800 Series IOS IP
S800C-12105
Cisco 800 Series IOS IP
S800C-12105=
Cisco 800 Series IOS IP/FW
S800CH-12105
Cisco 800 Series IOS IP/FW
S800CH-12105=
Cisco 800 Series IOS IP/FW PLUS IPSEC
56
S800CHL-12105
Cisco 800 Series IOS IP/FW PLUS IPSEC
56
S800CHL-12105=
Cisco 800 Series IOS IP/FW PLUS
S800CHP-12105
Cisco 800 Series IOS IP/FW PLUS
S800CHP-12105=
Cisco 800 Series IOS IP PLUS
S800CP-12105
Cisco 800 Series IOS IP PLUS
S800CP-12105=
Cisco 800 Series IOS IP/IPX/FW PLUS
IPSEC 56
S800BHL-12104=
Cisco 800 Series IOS IP/IPX PLUS
S800BP-12104
Cisco 800 Series IOS IP/IPX PLUS
S800BP-12104=
Cisco 800 Series IOS IP
S800C-12104
Cisco 800 Series IOS IP
S800C-12104=
Cisco 800 Series IOS IP/FW
S800CH-12104
Cisco 800 Series IOS IP/FW
S800CH-12104=
10 Cisco Product Catalog, April, 2001
Part Description
Part Number
Cisco 800 Series IOS IP/FW PLUS IPSEC
56
S800CHL-12104
Cisco 800 Series IOS IP/FW PLUS IPSEC
56
S800CHL-12104=
Cisco 800 Series IOS IP/FW PLUS
S800CHP-12104
Cisco 800 Series IOS IP/FW PLUS
S800CHP-12104=
Cisco 800 Series IOS IP PLUS
S800CP-12104
Cisco 800 Series IOS IP PLUS
S800CP-12104=
Cisco 800 Series IOS IP/IPX/FW PLUS
IPSEC 3DES
S8BHK2-12103XG=
Cisco 800 Series IOS IP/IPX/FW PLUS
IPSEC 56
S8BHL-12103XG
Cisco 800 Series IOS IP/IPX/FW PLUS
IPSEC 56
S8BHL-12103XG=
Cisco 800 Series IOS IP/IPX PLUS
S8BP-12103XG
Cisco 800 Series IOS IP/IPX PLUS
S8BP-12103XG=
Cisco 800 Series IOS IP
S8C-12103XG
Cisco 800 Series IOS IP
S8C-12103XG=
Cisco 800 Series IOS IP/FW
S8CH-12103XG
Cisco 800 Series IOS IP/FW
S8CH-12103XG=
Cisco 800 Series IOS IP/FW PLUS IPSEC
3DES
S8CHK2-12103XG=
Cisco 800 Series IOS IP/FW PLUS IPSEC
56
S8CHL-12103XG
Cisco 800 Series IOS IP/FW PLUS IPSEC
56
S8CHL-12103XG=
Cisco 800 Series IOS IP PLUS
S8CP-12103XG
Cisco 800 Series IOS IP PLUS
S8CP-12103XG=
Cisco 800 Series IOS IP/IPX FW PLUS
IPSEC 56
S8BHL-12102T
Cisco 800 Series IOS IP/IPX FW PLUS
IPSEC 56
S8BHL-12102T=
Cisco 800 Series IOS IP/IPX PLUS
S8BP-12102T
Cisco 800 Series IOS IP/IPX PLUS
S8BP-12102T=
Cisco 800 Series IOS IP
S8C-12102T
Cisco 800 Series IOS IP
S8C-12102T=
Cisco 800 Series IOS IP/FW
S8CH-12102T
Cisco 800 Series IOS IP/FW
S8CH-12102T=
Cisco 800 Series IOS IP/FW PLUS IPSEC
56
S8CHL-12102T
Cisco 800 Series IOS IP/FW PLUS IPSEC
56
S8CHL-12102T=
Cisco 800 Series IOS IP/FW PLUS
S8CHP-12102T
Cisco 800 Series IOS IP/FW PLUS
S8CHP-12102T=
Cisco 800 Series IOS IP PLUS
S8CP-12102T
Cisco 800 Series IOS IP PLUS
S8CP-12102T=
Visit Cisco Connection Online at www.cisco.com
11
Part Description
Part Number
Cisco 800 Series IOS IP/IPX FW PLUS
IPSEC 56
I8BHL-12102XF
Cisco 800 Series IOS IP/FW PLUS IPSEC
56
I8CHL-12102XF
Cisco 800 Series IOS IP/IPX FW PLUS
IPSEC 56
S8BHL-12102XF=
Cisco 800 Series IOS IP/IPX PLUS
S8BP-12102XF=
Cisco 800 Series IOS IP
S8C-12102XF
Cisco 800 Series IOS IP
S8C-12102XF=
Cisco 800 Series IOS IP/FW
S8CH-12102XF=
Cisco 800 Series IOS IP/FW PLUS IPSEC
56
S8CHL-12102XF=
Cisco 800 Series IOS IP PLUS
S8CP-12102XF=
Cisco 800 Series IOS IP/IPX FW PLUS
IPSEC 56
S800BHL-12102=
Cisco 800 Series IOS IP/IPX PLUS
S800BP-12102=
Cisco 800 Series IOS IP
S800C-12102=
Cisco 800 Series IOS IP/FW
S800CH-12102=
Cisco 800 Series IOS IP/FW PLUS IPSEC
56
S800CHL-12102=
Cisco 800 Series IOS IP/FW PLUS
S800CHP-12102=
Cisco 800 Series IOS IP PLUS
S800CP-12102=
Cisco 800 Series IOS IP/IPX/FW PLUS
IPSEC 56
S800BHL-12103
Cisco 800 Series IOS IP/IPX/FW PLUS
IPSEC 56
S800BHL-12103=
Cisco 800 Series IOS IP/IPX PLUS
S800BP-12103
Cisco 800 Series IOS IP/IPX PLUS
S800BP-12103=
Cisco 800 Series IOS IP
S800C-12103
Cisco 800 Series IOS IP
S800C-12103=
Cisco 800 Series IOS IP/FW
S800CH-12103
Cisco 800 Series IOS IP/FW
S800CH-12103=
Cisco 800 Series IOS IP/FW PLUS IPSEC
56
S800CHL-12103
Cisco 800 Series IOS IP/FW PLUS IPSEC
56
S800CHL-12103=
Cisco 800 Series IOS IP/FW PLUS
S800CHP-12103
Cisco 800 Series IOS IP/FW PLUS
S800CHP-12103=
Cisco 800 Series IOS IP PLUS
S800CP-12103
Cisco 800 Series IOS IP PLUS
S800CP-12103=
Cisco 800 Series IOS IP/IPX/FW PLUS
IPSEC 56
S8BHL-12103T
Cisco 800 Series IOS IP/IPX/FW PLUS
IPSEC 56
S8BHL-12103T=
Cisco 800 Series IOS IP/IPX PLUS
S8BP-12103T
Cisco 800 Series IOS IP/IPX PLUS
S8BP-12103T=
Cisco 800 Series IOS IP
S8C-12103T
12 Cisco Product Catalog, April, 2001
Part Description
Part Number
Cisco 800 Series IOS IP
S8C-12103T=
Cisco 800 Series IOS IP/FW
S8CH-12103T
Cisco 800 Series IOS IP/FW
S8CH-12103T=
Cisco 800 Series IOS IP/FW PLUS IPSEC
56
S8CHL-12103T
Cisco 800 Series IOS IP/FW PLUS IPSEC
56
S8CHL-12103T=
Cisco 800 Series IOS IP/FW PLUS
S8CHP-12103T
Cisco 800 Series IOS IP/FW PLUS
S8CHP-12103T=
Cisco 800 Series IOS IP PLUS
S8CP-12103T
Cisco 800 Series IOS IP PLUS
S8CP-12103T=
Cisco 800 Series IOS IP/IPX FW PLUS
IPSEC 56
S8BHL-12.0.5T
Cisco 800 Series IOS IP/FW
S8CH-12.0.5T
Cisco 800 Series IOS IP/FW PLUS IPSEC
56
S8CHL-12.0.5T
Cisco 800 Series IOS IP/FW PLUS
S8CHP-12.0.5T
Cisco 800 Series IOS IP PLUS
S8CP-12.0.5T
Cisco 800 Series IOS IP/IPX FW PLUS
IPSEC 56
S8BHL-12.0.7T
Cisco 800 Series IOS IP/IPX FW PLUS
IPSEC 56
S8BHL-12.0.7T=
Cisco 800 Series IOS IP
S8C-12.0.7T
Cisco 800 Series IOS IP
S8C-12.0.7T=
Cisco 800 Series IOS IP/FW
S8CH-12.0.7T
Cisco 800 Series IOS IP/FW
S8CH-12.0.7T=
Cisco 800 Series IOS IP/FW PLUS IPSEC
56
S8CHL-12.0.7T
Cisco 800 Series IOS IP/FW PLUS IPSEC
56
S8CHL-12.0.7T=
Cisco 800 Series IOS IP/FW PLUS
S8CHP-12.0.7T
Cisco 800 Series IOS IP/FW PLUS
S8CHP-12.0.7T=
Cisco 800 Series IOS IP PLUS
S8CP-12.0.7T
Cisco 800 Series IOS IP PLUS
S8CP-12.0.7T=
Cisco 800 Series IOS IP/IPX FW PLUS
IPSEC 56
S8BHL-12.0.7XV
Cisco 800 Series IOS IP/IPX FW PLUS
IPSEC 56
S8BHL-12.0.7XV=
Cisco 800 Series IOS IP/FW
S8CH-12.0.7XV
Cisco 800 Series IOS IP/FW
S8CH-12.0.7XV=
Cisco 800 Series IOS IP/FW PLUS IPSEC
56
S8CHL-12.0.7XV
Cisco 800 Series IOS IP/FW PLUS IPSEC
56
S8CHL-12.0.7XV=
Cisco 800 Series IOS IP/FW PLUS
S8CHP-12.0.7XV
Cisco 800 Series IOS IP/FW PLUS
S8CHP-12.0.7XV=
Cisco 800 Series IOS IP PLUS
S8CP-12.0.7XV
Visit Cisco Connection Online at www.cisco.com
13
Part Description
Part Number
Cisco 800 Series IOS IP PLUS
S8CP-12.0.7XV=
Cisco 827 Series IOS IP/IPX VOICE
PLUS
S8BP-12101XB
Cisco 827 Series IOS IP
S8C-12101XB
Cisco 827 Series IOS IP VOICE PLUS
S8CVP-12101XB
Cisco 827 Series IOS IP/IPX VOICE
PLUS
S8BP-12101XB=
Cisco 827 Series IOS IP
S8C-12101XB=
Cisco 827 Series IOS IP VOICE PLUS
S8CVP-12101XB=
Cisco 805 Series IOS Software
Options
Cisco 805 Series IOS IP/IPX/FW PLUS
IPSEC 56
S805BHL-12105
Cisco 805 Series IOS IP/IPX/FW PLUS
IPSEC 56
S805BHL-12105=
Cisco 805 Series IOS IP/IPX PLUS
S805BP-12105
Cisco 805 Series IOS IP/IPX PLUS
S805BP-12105=
Cisco 805 Series IOS IP
S805C-12105
Cisco 805 Series IOS IP
S805C-12105=
Cisco 805 Series IOS IP/FW
S805CH-12105
Cisco 805 Series IOS IP/FW
S805CH-12105=
Cisco 805 Series IOS IP/FW PLUS IPSEC
56
S805CHL-12105
Cisco 805 Series IOS IP/FW PLUS IPSEC
56
S805CHL-12105=
Cisco 805 Series IOS IP/FW PLUS
S805CHP-12105=
Cisco 805 Series IOS IP PLUS
S805CP-12105
Cisco 805 Series IOS IP PLUS
S805CP-12105=
Cisco 805 Series IOS IP/IPX/FW PLUS
IPSEC 56
S805BHL-12104=
Cisco 805 Series IOS IP/IPX PLUS
S805BP-12104
Cisco 805 Series IOS IP/IPX PLUS
S805BP-12104=
Cisco 805 Series IOS IP
S805C-12104
Cisco 805 Series IOS IP
S805C-12104=
Cisco 805 Series IOS IP/FW
S805CH-12104
Cisco 805 Series IOS IP/FW
S805CH-12104=
Cisco 805 Series IOS IP/FW PLUS IPSEC
56
S805CHL-12104=
Cisco 805 Series IOS IP/FW PLUS
S805CHP-12104=
Cisco 805 Series IOS IP PLUS
S805CP-12104
Cisco 805 Series IOS IP PLUS
S805CP-12104=
Cisco 805 Series IOS IP/IPX/FW PLUS
IPSEC 3DES
S805BHK2-12103XG
Cisco 805 Series IOS IP/IPX/FW PLUS
IPSEC 3DES
S805BHK2-12103XG=
Cisco 805 Series IOS IP/IPX/FW PLUS
IPSEC 56
S805BHL-12103XG=
14 Cisco Product Catalog, April, 2001
Part Description
Part Number
Cisco 805 Series IOS IP/IPX PLUS
S805BP-12103XG
Cisco 805 Series IOS IP/IPX PLUS
S805BP-12103XG=
Cisco 805 Series IOS IP
S805C-12103XG
Cisco 805 Series IOS IP
S805C-12103XG=
Cisco 805 Series IOS IP/FW
S805CH-12103XG
Cisco 805 Series IOS IP/FW
S805CH-12103XG=
Cisco 805 Series IOS IP/FW PLUS IPSEC
3DES
S805CHK2-12103XG=
Cisco 805 Series IOS IP/FW PLUS IPSEC
56
S805CHL-12103XG
Cisco 805 Series IOS IP/FW PLUS IPSEC
56
S805CHL-12103XG=
Cisco 805 Series IOS IP PLUS
S805CP-12103XG
Cisco 805 Series IOS IP PLUS
S805CP-12103XG=
Cisco 805 Series IOS IP/IPX FW PLUS
IPSEC 56
S805BHL-12102T=
Cisco 805 Series IOS IP/IPX PLUS
S805BP-12102T
Cisco 805 Series IOS IP/IPX PLUS
S805BP-12102T=
Cisco 805 Series IOS IP
S805C-12102T
Cisco 805 Series IOS IP
S805C-12102T=
Cisco 805 Series IOS IP/FW
S805CH-12102T
Cisco 805 Series IOS IP/FW
S805CH-12102T=
Cisco 805 Series IOS IP/FW PLUS IPSEC
56
S805CHL-12102T=
Cisco 805 Series IOS IP/FW PLUS
S805CHP-12102T=
Cisco 805 Series IOS IP PLUS
S805CP-12102T
Cisco 805 Series IOS IP PLUS
S805CP-12102T=
Cisco 805 Series IOS IP/IPX FW PLUS
IPSEC 56
S805BHL-12102=
Cisco 805 Series IOS IP/IPX PLUS
S805BP-12102=
Cisco 805 Series IOS IP
S805C-12102=
Cisco 805 Series IOS IP/FW
S805CH-12102=
Cisco 805 Series IOS IP/FW PLUS IPSEC
56
S805CHL-12102=
Cisco 805 Series IOS IP/FW PLUS
S805CHP-12102=
Cisco 805 Series IOS IP PLUS
S805CP-12102=
Cisco 805 IOS IP/IPX Plus
S805BP-12.0.4XM
Cisco 805 IOS IP/IPX Plus
S805BP-12.0.4XM=
Cisco 805 IOS IP
S805C-12.0.4XM
Cisco 805 IOS IP
S805C-12.0.4XM=
Cisco 805 IOS IP Plus
S805CP-12.0.4XM
Cisco 805 IOS IP Plus
S805CP-12.0.4XM=
Cisco 805 IOS IP/FW
S805CH-12.0.4XM
Cisco 805 IOS IP/FW
S805CH-12.0.4XM=
Visit Cisco Connection Online at www.cisco.com
15
Part Description
Part Number
Cisco 805 Series IOS IP/IPX FW PLUS
IPSEC 56
S805BHL-12.0.7T=
Cisco 805 Series IOS IP/IPX PLUS
S805BP-12.0.7T
Cisco 805 Series IOS IP/IPX PLUS
S805BP-12.0.7T=
Cisco 805 Series IOS IOS IP
S805C-12.0.7T
Cisco 805 Series IOS IOS IP
S805C-12.0.7T=
Cisco 805 Series IOS IOS IP/FW
S805CH-12.0.7T
Cisco 805 Series IOS IOS IP/FW
S805CH-12.0.7T=
Cisco 805 Series IOS IP/FW PLUS IPSEC
56
S805CHL-12.0.7T
Cisco 805 Series IOS IP/FW PLUS IPSEC
56
S805CHL-12.0.7T=
Cisco 805 Series IOS IP/FW PLUS
S805CHP-12.0.7T
Cisco 805 Series IOS IP/FW PLUS
S805CHP-12.0.7T=
Cisco 805 Series IOS IOS IP PLUS
S805CP-12.0.7T
Cisco 805 Series IOS IOS IP PLUS
S805CP-12.0.7T=
Cisco 805 Series IOS IP/IPX FW PLUS
IPSEC 56
I805BHL-12.0.7T
Cisco 805 Series IOS IOS IP
I805C-12.0.7T
Cisco 805 Series IOS IP/FW PLUS IPSEC
56
I805CHL-12.0.7T
Cisco 805 Series IOS IP/IPX FW PLUS
IPSEC 56
S805BHL-12101T
Cisco 805 Series IOS IP/IPX PLUS
S805BP-12101T
Cisco 805 Series IOS IP/FW
S805CH-12101T
Cisco 805 Series IOS IP/FW PLUS IPSEC
56
S805CHL-12101T
Cisco 805 Series IOS IP/FW PLUS
S805CHP-12101T
Cisco 805 Series IOS IP/IPX FW PLUS
IPSEC 56
S805BHL-12101T=
Cisco 805 Series IOS IP
S805C-12101T=
Cisco 805 Series IOS IP/FW
S805CH-12101T=
Cisco 805 Series IOS IP/FW PLUS IPSEC
56
S805CHL-12101T=
Cisco 805 Series IOS IP/FW PLUS
S805CHP-12101T=
Cisco 805 Series IOS IP PLUS
S805CP-12101T=
Cisco 805 Series IOS IP/IPX/FW PLUS
IPSEC 56
S805BHL-12103=
Cisco 805 Series IOS IP/IPX PLUS
S805BP-12103
Cisco 805 Series IOS IP/IPX PLUS
S805BP-12103=
Cisco 805 Series IOS IP
S805C-12103
Cisco 805 Series IOS IP
S805C-12103=
Cisco 805 Series IOS IP/FW
S805CH-12103
Cisco 805 Series IOS IP/FW
S805CH-12103=
Cisco 805 Series IOS IP/FW PLUS IPSEC
56
S805CHL-12103=
16 Cisco Product Catalog, April, 2001
Part Description
Part Number
Cisco 805 Series IOS IP/FW PLUS
S805CHP-12103=
Cisco 805 Series IOS IP PLUS
S805CP-12103
Cisco 805 Series IOS IP PLUS
S805CP-12103=
Cisco 805 Series IOS IP/IPX/FW PLUS
IPSEC 56
S805BHL-12103T=
Cisco 805 Series IOS IP/IPX PLUS
S805BP-12103T
Cisco 805 Series IOS IP/IPX PLUS
S805BP-12103T=
Cisco 805 Series IOS IP
S805C-12103T
Cisco 805 Series IOS IP
S805C-12103T=
Cisco 805 Series IOS IP/FW
S805CH-12103T
Cisco 805 Series IOS IP/FW
S805CH-12103T=
Cisco 805 Series IOS IP/FW PLUS IPSEC
56
S805CHL-12103T=
Cisco 805 Series IOS IP/FW PLUS
S805CHP-12103T=
Cisco 805 Series IOS IP PLUS
S805CP-12103T
Cisco 805 Series IOS IP PLUS
S805CP-12103T=
Cisco 820 Series IOS Software
Options
Cisco 820 Ser IOS IP/IPX/FW PLUS
IPSEC 3DES
S820BHK2-12103XG
Cisco 820 Ser IOS IP/IPX/FW PLUS
IPSEC 3DES
S820BHK2-12103XG=
Cisco 820 Ser IOS IP/IPX/VOICE PLUS
S820BVP-12103XG
Cisco 820 Ser IOS IP/IPX/VOICE PLUS
S820BVP-12103XG=
Cisco 820 Ser IOS IP
S820C-12103XG
Cisco 820 Ser IOS IP
S820C-12103XG=
Cisco 820 Ser IOS IP/FW PLUS IPSEC
3DES
S820CHK2-12103XG
Cisco 820 Ser IOS IP/FW PLUS IPSEC
3DES
S820CHK2-12103XG=
Cisco 820 Ser IOS IP/FW PLUS IPSEC 56
S820CHL-12103XG
Cisco 820 Ser IOS IP/FW PLUS IPSEC 56
S820CHL-12103XG=
Cisco 820 Ser IOS IP/FW/VOICE PLUS
IPSEC 3DES
S820CHVK2-12103XG
Cisco 820 Ser IOS IP/FW/VOICE PLUS
IPSEC 3DES
S820CHVK2-12103XG=
Cisco 820 Ser IOS IP/FW/VOICE PLUS
IPSEC 56
S820CHVL-12103XG
Cisco 820 Ser IOS IP/FW/VOICE PLUS
IPSEC 56
S820CHVL-12103XG=
Cisco 820 Ser IOS IP/VOICE
S820CV-12103XG
Cisco 820 Ser IOS IP/VOICE
S820CV-12103XG=
Cisco 800 Series Software CD Feature
Packs
Cisco 801-805 IP Feature Pack
CD08-C-12.0.5=
Cisco 801-805 IP/Firewall Feature Pack
CD08-CH-12.0.5=
Visit Cisco Connection Online at www.cisco.com
17
Part Description
Part Number
Cisco 801-805 IP/IPX Firewall Plus IPSEC
56 Feature Pack
CD08-BHL-12.0.7=
Cisco 801-805 IP/Firewall Plus Feature
Pack
CD08-CHP-12.0.7=
Cisco 801-805 IP Plus Feature Pack
CD08-CP-12.0.7=
Cisco 800 IP IPX FW Plus IPSec Feature
Pack
CD08-BHL-12.0.7XV=
Cisco 801-805 IP/Firewall Plus IPSEC 56
Feature Pack
CD08-CHL-12.0.7=
Cisco 800 Series CAPI Software
License
CAPI Software one-user license
CD800-1CAPI=
CAPI 5 USER CD
CD800-5CAPI=
Documentation
For part numbers for product specific documentation, visit
http://www.cisco.com/univercd/cc/td/doc/pcat/swdo__d1.htm
18 Cisco Product Catalog, April, 2001
Download PDF