Initial setup of Wi-Free for Windows 8 Windows 8

Initial setup of Wi-Free for Windows 8 Windows 8
Windows 8
Initial setup of Wi-Free
for Windows 8
Follow the steps listed below to set up a PC with Windows 8 for UPC Wi-Free.
Step 1: • Right-click on the Wi-Fi icon
•Open Network and Sharing Center
Step 2: Click on Set up a new connection or network
Step 3:
•Choose Manually connect to a wireless network
• Click on Next Step 4: • Network name is UPC Wi-Free
•Choose WPA2-Enterprise security type
• Click on Next
Step 5:
Click on Change connection settings
Step 6: •Choose Security tab
• Click on Settings
Step 7: • Remove tick for Verify the server’s identity by validating the certificate
• Click on Configure
Step 8:
• Remove tick for Automatically use my Windows log-on name and password
(and domain if any)
• Click on OK
Step 9:
Click on OK
Step 10: Click on Advanced settings
Step 11:
•Tick Specify authentication mode
•Choose User authentication
•Click Save credentials
Step 12: Enter your My UPC username (usually your e-mail address) and your
Wi-Free password and click on OK
Step 13:
Click on OK
Step 14:
Click on OK
Step 15:
Click on Close
Step 16:
• Click on the Wi-Fi icon
• You are now connected to UPC Wi-Free
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF