kbic kbmm convert smt

kbic kbmm convert smt
KBIC & KBMM Series of DC Drives Convert to SMT
KBIC & KBMM Series of DC drives are now available with (SMT) Surface Mount
Technology manufacturing. SMT manufacturing allows a drive to have more circuitry in the
same amount of space, or to make the drive smaller. Rather than change the industry’s
standard footprint, we decided to add more features. SMT manufacturing uses a pick and place
machine that visually verifies every part before it is placed on the PC board, virtually
eliminating the possibility of inserting an incorrect part.
The KBMM Series of DC drive utilizes jumpers for selecting line voltage, armature voltage
and tach feedback settings. It is no longer necessary to cut resistors. Standard features now
found on the KBMM Series of DC drives are: a green Power-on LED, a red Motor Over-load
CL LED, an Enable circuit that allows (Make to Run, Break to Coast). The Enable circuit now
allows the motor to coast to a stop, rather than Decel to the MIN speed setting. These
additional features were added without a price increase.
The KBIC Series of DC drives were also converted to SMT. We decided to leave the industry
standard KBIC circuit unchanged, except for the addition of a green Power-on LED. Dual
voltage and step-down models of the KBIC do not require voltage selection jumpers. Each
drive still has the same features as previous models. A chart follows for your review.
The SMT version of the KBMM Series of DC drives are also used in the KBMD Multi-Drive
and KBWM Vari-Drive.
Sincerely,
Richard Fritts
National Sales Manager
KBIC & KBMM SMT DC Drives Standard Features
Features
KBIC
KBMM
Available
Available
No
Yes
No
Not Req.
Not Req.
No
Standard
Standard
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
0-7 VDC
15A or 25A
Yes
N/A
Yes
0-9 VDC
25A
Yes
Yes
Yes
Aux. Heatsink
Signal Isolator
Barrier Terminal Bd.
Available
SI-5
Available
Available
SI-6
Available
Packaging
Instruction Manual
PHR
Individual
Yes
Yes
Individual
Yes
Yes
Line Fuse Holder
Arm Fuse Holder
CL LED
Pwr On LED
Tach Feedback
Line Voltage Jumper
Arm Voltage Jumper
B & T Terminals
Accel Trimpot
Decel Trimpot
Min Trimpot
Max Trimpot
IR Trimpot
CL Trimpot
Voltage Following
SCR's & Diodes
Main Pot
Enable Circuit
Inhibit Circuit
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement