Alpha | Ecoguard Type W | Specifications | Alpha Ecoguard Type W Specifications

TOOLS FOR CONCRETE CONTRACTORS
VERSION 4
New Series of Diamond Blades!
See our complete series of Grinding Discs for
curved surfaces, shaping and coating removal.
Providing Better Solutions to the Professional
Copyright © 2014 Alpha Professional Tools®. All rights reserved.
Contact Information
COMPANY HEADQUARTERS: Alpha Professional Tools®
103 Bauer Drive
Oakland, NJ 07436
Hours of Operation: 8:30 a.m. – 5:00 p.m. EST
Telephone Number: 201-337-3343
Toll-Free Number:
800-648-7229
Fax Number: 201-337-2216
Customer Service Fax Number:
800-286-0114
Tool Department Fax Number: 201-337-2265
Accounting Department Fax Number:
201-337-2262
E-mail orders to:
orderdesk@alpha-tools.com
E-mail Spare Parts orders to:
tooldesk@alpha-tools.com
Technical Support:
technicalsupport@alpha-tools.com
SALES CONTACTS BY TERRITORY:
Caribbean 201-337-3343 Sales-Caribbean@alpha-tools.com
Central Canada
519-505-7900
Sales-CentralCanada@alpha-tools.com
Central Plains
800-648-7229
Sales-CentralPlains@alpha-tools.com
Florida
239-898-8397
Sales-Florida@alpha-tools.com
International
201-337-3343
Sales-International@alpha-tools.com
Mid-Atlantic
804-347-3011
Sales-Mid-Atlantic@alpha-tools.com
Midwest
630-849-7105 Sales-Midwest@alpha-tools.com
Mountain
480-283-3729 / 602-337-3393
New England
978-337-1548
Sales-NewEngland@alpha-tools.com
Northern CA
510-409-9326
Sales-NorthernCA@alpha-tools.com
Northwest
Sales-Mountain@alpha-tools.com
510-409-9326 Sales-Northwest@alpha-tools.com
NY Metro
973-830-7681
Ohio Valley
440-364-3759
Sales-OhioValley@alpha-tools.com
Pacific 800-648-7229
Sales-Pacific@alpha-tools.com
South
800-648-7229
Sales-South@alpha-tools.com
Southeast
678-977-1147 Sales-Southeast@alpha-tools.com
Southern CA
714-853-3476
Sales-SouthernCA@alpha-tools.com
Western Canada
519-505-7900 Sales-WesternCanada@alpha-tools.com
Sales-NYMetro@alpha-tools.com
Visit us on the web at: www.alpha-tools.com
Chemical Emergency - Chemtrec: 800-424-9300
Alpha Professional Tools® product line and pricing is subject to change at any time.
Alpha® is not responsible or liable for typographical errors.
Contents
CUTTING SYSTEM
Ecocutter, Stand-Alone Tool for Dry Cutting Applications................................................................1
DRY BLADES
Ultracut - APR Series.............................................................................................................................2
Ultracut - GPM Series.............................................................................................................................3
Ultractu - ABM Series.............................................................................................................................4
Tuck Point Blade for Brick Re-Pointing...............................................................................................5
Eclipse II Blade for General Purpose Cutting......................................................................................5
GROOVE/CHANNEL CUTTING
Hot-Rod Blades for Creating Channels for Reinforcing Rods and Grout Removal.........................6
Groove Cutter Series for Cutting Grooves for Joint Seaming...........................................................6
PROFILING
Profiler B-Series for Creating a Perfect Roundover Edge..................................................................7
Profiler V-Series for Creating a Full Bullnose Edge............................................................................7
Profiler F-Series for Creating an Ogee Beveled Edge.........................................................................8
Profiler Z-Series for Vertical Grinding..................................................................................................8
Crack Chasing, A V-Cut Style Wheel for Concrete Repair..................................................................9
Concrete Profiling Wheel for Creating a Perfect Roundover Edge on Concrete Grooves..............9
DRILLING
Wet Core Drilling..................................................................................................................................10
Dry Core Drilling...................................................................................................................................10
GRINDING & SHAPING
Segmented Grinding Cup Wheels for Grinding Concrete, Terrazzo and Masonry Products........15
Vexcel Vacuum-Brazed Grinding Disc................................................................................................ 11
Spike Vacuum-Brazed Grinding Disc for Surface Preparation.........................................................12 Vextra Flat Grinding Disc for the EX Zone..........................................................................................13
Vflex Flexible Sanding Disc.................................................................................................................14
i
www.alpha-tools.com
Contents
HAND TOOLS AND ACCESSORIES
HAND TOOLS
ECG-125, High Performance Grinder with Built-in Vacuum System...............................................15
HSG-125, High-Speed Angle Grinder..................................................................................................16
WDP-120, Wet/Dry Polisher.................................................................................................................17
VSP-120, Variable Speed Wet Polisher...............................................................................................18
AWP-158, Portable Electric Polisher..................................................................................................19
AIR-300, A New Generation of Air Polisher for Fabricators.............................................................20
AIR-658, The Ultimate Air Polisher.....................................................................................................21
ACCESSORIES
Rigid Backer Pads................................................................................................................................22
Flexible Backer Pads............................................................................................................................22
GV Backer Pads....................................................................................................................................22
Ecocaddy, A Stand-up Grinder Caddy for the Ecogrinder..............................................................23
Dust Bag Carriage................................................................................................................................23
Dry Tile Bullnose Kit............................................................................................................................24
Ecoguard Type M, A High-Speed Angle Grinder Solution for Cutting Metal...................................25
Ecoguard Type G for Grinding Applications.....................................................................................26
Ecoguard Type C, A Hybrid Dust Collection Cover for Cutting Applications................................27
Ecoguard Type W, A Dust Collection Cover for Wider Cutting Blades...........................................28
HEPA Dry Vacuum 10-Gal ...................................................................................................................29
Apron.....................................................................................................................................................30
Safety Glasses......................................................................................................................................30
POLISHING
Concrete 4-Step Polishing System.....................................................................................................31
Wet/Dry Concrete Polishing Discs......................................................................................................32
Ceramica Dry, A Dry Polishing for all Natural Stones and Cement Based Composites................33 Ceremica Edge......................................................................................................................................34
Ceramica EX for Polishing Stones......................................................................................................35
Sandpaper for Polishing Marble and Softer Types of Natural Stones.............................................36
Diamond Hand Pads, A Versatile Hand Finishing Tool.....................................................................37
RESTORATION & MAINTENANCE
RSR-2000 Rust Stain Remover in Gel Form.......................................................................................38
Stain Removers, General Stain Removers in Poultice Form............................................................38 Moisture Test Kit for Calculating Vapor Emissions..........................................................................39
Moisture Test Kit Step-by-Step Instructions......................................................................................40
Alpha® Kits............................................................................................................................................41
ii
CUTTING SYSTEM
Alpha® Ecocutter
Ultimate Stand-Alone Tool for Your Dry Cutting Applications
The Ecocutter Dry Tile Cutting System was first introduced as a portable
dry cutting system for tile installers. This system included the
Ecocutter, table and stand. Now, Alpha Professional Tools® is
offering the Ecocutter as a stand-alone tool for all your dry cutting
applications. The Ecocutter (ECC-125) is equipped with a built-in
impeller that generates air flow to draw dust back, and deliver
it to the dust bag, thus eliminating the harmful dust particles
which are common in dry cutting applications. When combined
with the proper accessories, the Ecocutter is a great choice for
use in the shop or on the jobsite!
ECOCUTTER
Specifications:
Rating....................................110/220 Volts
Amperage.......................................11.2/5.5
Power...............................................1200W
No-load Speed (min-1).............12,000 RPM
Weight..................................9.5 lbs / 4.3 kg
Arbor......................................7/8” / 22.3mm
Cutting Disc Diameter................5” / 125mm
Max. Cutting Depth................1-1/8” / 29mm
(without Ecocutter Table)
Equipment Included:
• Dust Hose
• Dust Gate
• Forward Handle
• Hexagon Ring Spanner
• Wrench
• Dust Bag
• TT Ruler
• Hook and Loop Strap (2pcs)
Table
PART NO.
Ecocutter
Angle
Guide
DESCRIPTION
ECC-125
5” Ecocutter - 110V
ECC-KIT
Dry Tile Cutting System
133544
Ecocutter Dust Bag
*See page 23 for the Dust Bag Carriage
1
Dust Hose
5” Katana
Blade
Dust
Bag
Rip
Guide
Side Extension
Support
Stand
Casters
ECOCUTTER DRY TILE
CUTTING SYSTEM
www.alpha-tools.com
Alpha® Ultracut - APR Series
Hybrid Blade For Intricate And Flush Cutting Application
CUTTING SYSTEM
The Alpha® Ultracut APR Series combines the
high-performance of the Alpha® Ultracut GPM
Series with our unique design for flush cutting
applications. Unlike other blades, the Ultracut
APR Series blade accepts our exclusive Quad
Drive Adapter, which eliminates the required lock
nut, so it is perfect for “flush cutting” applications.
For a quick and easy solution, use this blade
to completely remove anchor bolts, concrete
re-bar and pipe from floors and walls. This blade
brings accuracy and precision flush cutting to the
manufacturing facility or the jobsite.
APR SERIES
PART NO.
SIZE
APR45QA 41/2”
APR05QA
5”
APR07QA
7”
BAH-5/8 Adapter
THICKNESS MAX RPM
1.7mm
—
—
5/8”-11
13,200
12,200
8,400
13,200
ARBOR
Quad Thread
Quad Thread
Quad Thread
Quad Thread
FEATURES
Fits most popular Grinders
QUAD ADAPTER
*See page 16 for the HSG-125, the Ultimate High-Speed Angle Grinder
2
Alpha® Ultracut - GPM Series
CUTTING SYSTEM
The Ultimate Vacuum Brazed Diamond Blade
The Alpha® Ultracut GPM Series is made for
building contractors and fabricators who work
with metal and composite materials. The
GPM Series blade fits on most popular handheld electric power tools for demanding metal
applications. Cut galvanized steel roofing sheets
and corrugated granite granule coated metal roof
tile, easily with a worm-drive saw without worrying
about carbide tip loss, compression marks and
burning of paint. Since the Alpha® Ultracut maintains
excellent cutting performance at the maximum cutting
depth throughout its life, iron workers and underwater
GPM SERIES
welders will appreciate using this blade. The Ultracut
GPM Series cuts angle iron, pipe, electrical conduit,
re-bar, metal stud, structural metal, sheet metal, grid, and stainless steel along with wood,
plastics, composite materials, masonry and concrete.
FEATURES
Fits most popular High-speed Angle Grinders and Circular Saws.
3
PART NO.
SIZE
MAXIMUM RPM
THICKNESS
ARBOR
GPM0420
GPM4578
GPM0578
GPM06UN
GPM07UN
GPM08UN
GPM0978
4”
4-1/2”
5”
6”
7”
8”
9”
14,500
13,200
12,200
10,100
8,400
7,400
6,600
1.5mm
1.5mm
1.5mm
1.9mm
1.9mm
1.9mm
2.2mm
20mm, 5/8”
7/8”, 20mm
7/8”
7/8”, 5/8”,
7/8”, 5/8”,
7/8”, 5/8”,
7/8”, 5/8”
www.alpha-tools.com
Alpha® Ultracut - ABM Series
CUTTING SYSTEM
Exclusively For Pneumatic Cut-Off Tools
The Alpha® Ultracut ABM Series is designed for
use on most popular pneumatic cut-off tools which
are widely used in automotive body shops and
many other industrial manufacturing facilities. The
Alpha® Ultracut doesn’t change diameter during the
cutting operation and provides maximum cutting depth
throughout its life. The Alpha® Ultracut has bi-directional
rotation so that you can use on reversible cut-off tools,
which could be useful to direct sparks and debris away
from the operator.
ABM SERIES
FEATURES
Fits most popular Pneumatic Cut-off Tools
-off
l
Too
ma
neu
dP
te
ten
ut
tic C
Ex
ol
ff To
ut-o
C
atic
um
Pne
PART NO.
SIZE
THICKNESS
MAX RPM
ARBOR
ABM0338
ABM0438
3”
4”
1.5mm
1.5mm
20,000
18,000
3/8”(10mm)
3/8”(10mm)
4
Alpha® Tuck Point Wheel
CUTTING SYSTEM
For Brick Re-Pointing
The Alpha® Tuck Point Wheel is specifically designed for brick
re-pointing and flash installation. This dry cutting wheel fits on
4”, 4-1/2” and 7” grinders. Masons and brick re-pointers will
find the Alpha® Tuck Point Wheel to be very aggressive and
long lasting. The Alpha® Tuck Point Wheel is segmented with a
very hard bond that resists the abrasive mortar commonly used
in brick laying. The Alpha® Tuck Point Wheel simplifies brick repointing and flash installations.
PART NO. SIZE MAX RPM
TUCK POINT
ARBOR(S)
TP04SP
4”
14,500
7/8”, 5/8”
TP07AL
7”
7/8”, 5/8”
7/8”, 20mm
*See page 12 for HSG-125 High-Speed Angle Grinder
*See page 24 for Ecoguard Type W, Dust Collection Cover for Wider Blades
Alpha® Eclipse II - General Purpose Blade for Concrete Contractors and Stone Fabricators
Alpha® Eclipse II is ideal for general purpose use
on common building materials such as masonry,
concrete and tile. Alpha® Eclipse II fits on most
of the angle grinders and wet stone cutters
commonly found in the stone and construction
industries. Similar in design to Alpha® Plus, Alpha®
Eclipse II is versatile and will cut tile, brick, block,
concrete, slate and natural stone accurately
and cleanly. Tile installers, masons and general
contractors will find Alpha®
Eclipse II proven to be a
reliable blade that will
meet the challenges
of cutting modern
building products.
ECLIPSE II
5
PART NO. SIZE MAX RPM
ARBOR(S)
DEE004
4”
14,500
20mm, 5/8”
DEE045
4-1/2”
13,200
7/8”, 20mm
DEE005
5”
12,200
7/8”
DEE006
6”
10,100
7/8”, 5/8”,
DEE007
7”
8,400
5/8”,
DEE008
8”
7,400
5/8”,
www.alpha-tools.com
Alpha® Hot-Rod for Granite
CUTTING SYSTEM
For Cutting Channels for Stainless Steel Rods and Grout Removal
Alpha Professional Tools ® has improved the
efficiency of tile contractors by expanding the
usage of the Hot-Rod blade for the removal
of grout. The Hot-Rod for Granite blades
were created with diamond grits and matrix to
ensure a long cutting life. When used with the
Ecocutter, the 3”diamater blade allows for easy
use while removing grout on the job site without
water, creating a portable, dust-free grout
removal solution. This blade is available in three
thicknesses: 1/4”, 3/16”and 1/8”. Tile contractors
agree, this is the best system for this application!
HR03A+
HQ03A+
HT03A+
1/4”
3/16”
1/8”
PART NO. SIZE
HR03A+
3”
HQ03A+
3”
HT03A+
3”
MAX RPM
14,500
14,500
14,500
ARBOR(S)
7/8”, 20mm
7/8”, 20mm
7/8”, 20mm
RECOMMENDED FOR
1/4” ROD
3/16” ROD
1/8” ROD
FOR USE ON
GRANITE
GRANITE
GRANITE
Alpha® Groove Cutter - For Wet Cutting Grooves for Concrete Decorative Accents
The Alpha® Groove Cutter is designed to cut
flawless grooves. Our patented design assures
the grooves will be level for decorative accents
or to achieve maximum strength for joint
seaming. Choose between two sizes to match
the thickness of your material.
The Groove Cutter works with the most
popular high-speed angle grinders
available on the market. A universal
safety guard equipped with a
water-feed and a Ground Fault
Circuit Interrupter are the perfect
accessories for this application and
are available from Alpha®.
GROOVE CUTTER
PART NO.
MAX RPM
ARBOR(S)
FOR USE ON
GCW258
14,500
5/8”-11 Threaded
3/4” Granite Slab
GCW358
14,500
5/8”-11 Threaded
1-1/4” Granite Slab
MCW258
14,500
5/8”-11 Threaded
3/4” Marble Slab
GCWKIT
Universal Safety Guard Kit
Accent Rod Inserted
UNIVERSAL SAFETY
GUARD KIT
US Patent No. 7,213,591
6
Alpha® Profiler B-Series
CUTTING & PROFILING
Wet Cutting Profiler for Concrete, Granite, Marble, Engineered Stone and Porcelain
Alpha® Profiler B-Series, is designed to produce
a roundover on concrete, granite, marble,
engineered stone, porcelain and crystallized
glass tile and slab. Equipped with a 5/8”-11
female thread and internal water passage holes,
the Alpha® Profiler B-Series will fit the AIR‑658,
AWP‑158, VSP-120 and other brands of center
water-feed polishers. The nylon guide slides
along the surface and the rotary touchier controls
the depth of cut to make this tool nearly “goofproof”. An operator with little or no fabrication
skills can easily create a perfect roundover on tile
or slab.
B
PART NO.
PFB051
PFB101
PFB131
PFB201
SIZE
3/16”
3/8”
1/2”
3/4”
PFBNG01
Nylon Guide
Demi-Bullnose
MAX RPM
ARBOR
3,500
5/8”-11 Threaded
3,500
5/8”-11 Threaded
3,500
5/8”-11 Threaded
3,500
5/8”-11 Threaded
-
-
SHAPE
Demi-Bullnose
Demi-Bullnose
Demi-Bullnose
Demi-Bullnose
PROFILER B
-
Alpha® Profiler V-Series - Wet Cutting Profiler for Concrete, Granite and
Engineered Stone
The Alpha® Profiler V-Series was designed for fabricators
that need to deal with the variety of thicknesses that is
inherent in all stone slabs. Whether you are working with
concrete, granite, engineered stone, porcelain, crystallized
glass, marble or limestone and the slab has a specified
thickness, such as 1-1/4” (3cm), the nature of the material
does not always match the exact specification. To piece
together long slabs for countertops that are not uniform in
thickness, is a difficult task for any fabricator. In the past, the
fabricator would have to calibrate the thicker slab to match
the other slabs being used, but not any more! Introducing
the Alpha® Profiler V-Series, a unique wheel designed to
create a bullnose edge profile that will eliminate the timeconsuming calibration process. Our patented design shapes
a professional looking bullnose edge quickly and easily. The
Alpha® Profiler V-Series will work on all popular water-fed
polishers including the AWP-158 and VSP-120 wet polishers.
Choose the Alpha® Profiler V-Series to produce a top quality
results!
PART NO.
PFV301
PFV401
PFBNG01
7
SIZE
1-1/4” (3cm)
1-1/2” (4cm)
Nylon Guide
MAX RPM
3,500
3,500
-
ARBOR
5/8”-11 Threaded
5/8”-11 Threaded
-
SHAPE
Full Bullnose
Full Bullnose
-
PROFILER V
V
Full Bullnose
www.alpha-tools.com
Alpha® Profiler F-Series
CUTTING & PROFILING
Wet Cutting Profiler for Concrete, Granite, Marble, Engineered Stone and Porcelain
Alpha® introduces a new addition to the Profiler Series with the
Profiler F, commonly known as Ogee. Since creating an Ogee
edge requires a large amount of material to be removed, Alpha®
recommends a two‑step process to make your operation easier.
Position 0 breaks the corner fast, followed by Position 1 to
complete the Ogee profile. The Alpha® Profiler F was designed
to eliminate the use of a router and can easily be used on a hand
polisher.
POSITION 0
PROFILER F
POSITION 1
F
Ogee Edge
PROFILER F-300
PART NO.
PFF200
PFF201
PFF300
PFF301
PFBNG01
SIZE
3/4”
3/4”
1-1/4”
1-1/4”
Nylon Guide
PROFILER F-301
MAX RPM
3,500
3,500
3,500
3,500
-
ARBOR
5/8”-11 Threaded
5/8”-11 Threaded
5/8”-11 Threaded
5/8”-11 Threaded
-
DESCRIPTION
Position 0
Position 1
Position 0
Position 1
-
SHAPE
Breaker
Ogee
Breaker
Ogee
-
Alpha® Profiler Z-Series - Wet Cutting Vertical Grinding Wheel for Concrete,
Marble, Granite and Engineered Stone
Alpha® Contour blade together with the AWS-125 Stone
Cutter allows fabricators to cut a sink hole along the cut line
quickly and safely. In order to shape the edge to a desired
profile, Alpha® introduces the Profiler Z-Series, Vertical
Grinding Wheels. Profiler Z-Series is also known as Zero
Tolerance or Drum Grinding. Most competitive products
use sintered bond which eventually changes the shape of
the wheel distorting the vertical edge. Using our Profiler
Z-Series maintains a very aggressive cutting performance
and its original shape for a long time. We recommend this
Vertical Grinding Wheel along with a Corner Ruler to make
uniform exterior corners.
PROFILER Z
Z
Straight Edge
PART NO.
SIZE
MAX RPM
PFZ301
1-1/4”
3,500
PFZ401
1-1/2”
3,500
PFBNG01 Nylon Guide
-
ARBOR
5/8”-11 Threaded
5/8”-11 Threaded
-
SHAPE
Full Bullnose
Straight
-
8
Alpha® Crack Chasing Wheel
CUTTING & PROFILING
Crack Chasing, V-Cut Style Wheel for Concrete Repair
With the increased popularity of concrete
being used inside and outside the home, Alpha
Professional Tools® has developed the Alpha®
Crack Chasing Wheel for repairing concrete
cracks. This V-cut style wheel produces a 1/2
inch wide, 70‑degree, V-shaped groove for recaulking and re-filling cracks. Made with direct
sintered bond diamond segments on both sides,
this wheel can cut cleanly and accurately while
providing a long life.
The 4” wheel fits on the Alpha® Ecocutter,
thus creating a portable, dust-free operation
eliminating unnecessary cleanup.
1/2”
70º
PART NO.
SIZE
MAX RPM
ARBOR
DCC478
4”
14,500
7/8”
CRACK CHASING
WHEEL
Alpha® Concrete Profiling Wheel - For Creating a Perfect Demi-Bullnose Edge
on Concrete Grooves
Alpha Professional Tools® has expanded its line
of profiling wheels to include the Alpha® Concrete
Profiling Wheel. This 3-3/8” wheel is designed
to create a demi-bullnose edge treatment on
concrete grooves. When used with the Alpha®
Ecocutter, it creates the ultimate dust-free portable
solution for decorative concrete contractors in the
market today!
Additionally, Alpha® has combined
the Ecocutter, Concrete Profiling
Wheel and the Eclipse II Blade
to create a virtually dust-free,
Concrete Profiling System for
creating expansion joints.
45o
CONCRETE
PROFILING WHEEL
9
PART NO.
SIZE
MAX RPM
ARBOR
CPE445
3-3/8”
14,500
7/8”
www.alpha-tools.com
Alpha® Wet Core Bit
Ultimate Wet Core Bit for Concrete, Granite and Engineered Stone
DRILLING
The Alpha ® Wet Core Drill Bit is designed
for drilling the faucet-mounting holes in
countertops and vanities. It can also be
used to make clean rounded corners for
square or rectangular sinkholes. The
Alpha ® Core Drill Bit is very versatile and
can be adapted for use in construction
trades wherever holes are needed
for water, gas and electrical piping,
especially when natural stone, concrete
or ceramic tile is already installed.
PART NO.
DCB00380
DCB00500
DCB00750
DCB01000
DCB01250
DCB01375
DCB01500
DCB02000
DCB02500
WET CORE BIT
Alpha® Dry Core Bit -
DIAMETER
3/8”
1/2”
3/4”
1”
1-1/4”
1-3/8”
1-1/2”
2”
2-1/2”
MAX RPM
3,500
3,500
3,500
3,500
3,500
3,500
3,500
3,500
3,500
ARBOR
5/8”-11 Threaded
5/8”-11 Threaded
5/8”-11 Threaded
5/8”-11 Threaded
5/8”-11 Threaded
5/8”-11 Threaded
5/8”-11 Threaded
5/8”-11 Threaded
5/8”-11 Threaded
High-Speed Dry Core Bit for Concrete, Granite and Eng. Stone
The Alpha® Dry Core Bits are designed to drill
the faucet-mounting holes in countertops and
vanities without using water! Now you can make
faucet holes at the jobsite. The bits come in a
variety of sizes, and fit on a high-speed angle
grinder using the same technique. Alpha® makes
it easy by eliminating the clean up time needed
when using a wet application.
PART NO.
DRB00500
DRB00750
DRB01000
DRB01250
DRB01375
DRB01500
DRB02000
DIAMETER
1/2”
3/4”
1”
1-1/4”
1-3/8”
1-1/2”
2”
MAX RPM
12,000
12,000
12,000
12,000
12,000
12,000
12,000
ARBOR
5/8”-11 Threaded
5/8”-11 Threaded
5/8”-11 Threaded
5/8”-11 Threaded
5/8”-11 Threaded
5/8”-11 Threaded
5/8”-11 Threaded
DRY CORE BIT
10
Alpha® Vexcel Grinding Disc
GRINDING
Rigid Grinding Disc With Fluoric Rubber Backing To Reduce Noise and Vibration
The Vexcel is designed for heavy duty material removal applications
whether it is cast iron, steel, stainless steel, non-ferrous
metals, metal alloys, carbon fiber reinforcement plastic
(CFRP), glass fiber reinforcement plastic (GFRP), natural and engineered stones. The Rigid steel base with
a curved design creates a very aggressive grinding
action and the fluoric rubber backing reduces noise
and vibration. It minimizes sparking so you can avoid
toxic air and pollution. The Vexcel has heavy duty multi-layers of diamond grits ensure aggressive material removal and the
longest life. The Vexcel grinding
MAX
wheel is highly recommended for
PART NO. SIZE
ARBOR
RPM
grinding of cast iron and welding
VDR4525 4-1/2”
13,200
7/8”
beam. Vexcel grinding wheel is
VDR452H 4-1/2”
13,200
5/8”-11
available in 4.5”, 5” and 7” with
VDR4535 4-1/2”
13,200
7/8”
7/8” arbor or with 5/8”-11 zinc
VDR453H 4-1/2”
13,200
5/8”-11
hub.
FEATURES
• Heavy duty diamond grits for
maximum performance; Fluoric
rubber backing to reduce noise and
vibration
*See page 16 for HSG-125 High-Speed
Angle Grinder
*See page 15 for ECG-125, the Ultimate
High Performance Grinder
*See page 26 for Ecoguard Type G, Dust
Collection Cover for Grinding Applications
11
VDR4550
VDR455H
VDR4580
VDR458H
VDR5025
VDR502H
VDR5035
VDR503H
VDR5050
VDR505H
VDR5080
VDR508H
VDR7025
VDR702H
VDR7035
VDR703H
VDR7050
VDR705H
VDR7080
VDR708H
4-1/2”
4-1/2”
4-1/2”
4-1/2”
5”
5”
5”
5”
5”
5”
5”
5”
7”
7”
7”
7”
7”
7”
7”
7”
13,200
13,200
13,200
13,200
12,200
12,200
12,200
12,200
12,200
12,200
12,200
12,200
8,400
8,400
8,400
8,400
8,400
8,400
8,400
8,400
7/8”
5/8”-11
7/8”
5/8”-11
7/8”
5/8”-11
7/8”
5/8”-11
7/8”
5/8”-11
7/8”
5/8”-11
7/8”
5/8”-11
7/8”
5/8”-11
7/8”
5/8”-11
7/8”
5/8”-11
VEXCEL
RECOMMENDED
FOR
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
GRIT
25
25
35
35
50
50
80
80
25
25
35
35
50
50
80
80
25
25
35
35
50
50
80
80
www.alpha-tools.com
Alpha® Spike Disc
GRINDING
Coating Removal and Surface Preparation
Patented technology makes this unique product available for “Clog-Free” coating removal
for epoxy, urethane, glue and adhesives for surface preparation. An Open-mesh diamond
layer removes debris fast avoiding heat buildup. Each diamond bead was
made with multiple diamond grits to maintain a sharp cutting capability
for a long time. The Spike Disc has a sandwiched-rubber cushioned
light-weight body that reduces noise and vibration, so that operator can
work for longer periods of time. Spike Disc is available in 4.5”, 5”
and 7” with 7/8” arbor or with 5/8”-11 zinc hub.
This Disc is also available with a square arbor that
fits the Spring Load System on the Alpha® Ecogrinder.
PART NO.
SIZE
VCS4535
VCS453H
VCS4550
VCS455H
VCS5035
VCS503H
VCS503Q
VCS5050
VCS505H
VCS7035
VCS703H
VCS7050
VCS705H
4-1/2”
4-1/2”
4-1/2”
4-1/2”
5”
5”
5”
5”
5”
7”
7”
7”
7”
MAX
ARBOR
RPM
13,200
7/8”
13,200 5/8”-11
13,200
7/8”
13,200 5/8”-11
13,200
7/8”
12,200 5/8”-11
12,200 Sq Arbor
12,200
7/8”
12,200 5/8”-11
8,400
7/8”
8,400
5/8”-11
8,400
7/8”
8,400
5/8”-11
RECOMMENDED
FOR
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
GRIT
35
35
50
50
35
35
35
50
50
35
35
50
50
SPIKE DISC
*See page 16 for HSG-125 High-Speed
Angle Grinder
*See page 15 for ECG-125, the Ultimate
High Performance Grinder
*See page 26 for Ecoguard Type G,
Dust Collection Cover for Grinding
Applications
FEATURES
• Unique open-mesh layout reduces clogging and heat build-up
12
Alpha® Vextra Grinding Disc- Flat Grinding Disc
GRINDING
Flat Grinding Disc For The Ex ZONE Where Spark Reduction Is A Priority
Designed to grind steel, stainless steel and non-ferrous metals for the Ex ZONE where spark
reduction is a priority. The Vextra is great for removing rust, burrs, mill scale, paint on metal
surface as well as epoxy, glues and adhesives without clogging the grinding surface. The
sandwich construction with rubber makes the grinding wheel light, reduces vibration and
noise to reduce fatigue of an operator. The Vextra has an optimized diamond grit and layer
arrangement offering a long life and consistent performance without downtime. You can
maximize the wheel coverage by grinding flat to improve productivity and
efficiency. The Vextra grinding wheel can be used on natural stones, engineered stone/quartz surface, wood and rubber. Vextra grinding wheel
is available in 4.5”, 5” and 7” with 7/8” arbor or with 5/8”-11 zinc hub.
FEATURES
• Optimized diamond grits for consistent performance; Sandwich
construction to reduce noise and vibration
PART NO. SIZE
VDD4535
VDD453H
VDD4550
VDD455H
VDD4580
VDD458H
VDD5035
VDD503H
VDD5050
VDD505H
VDD5080
VDD508H
VDD7035
VDD703H
VDD7050
VDD705H
VDD7080
VDD708H
13
4-1/2”
4-1/2”
4-1/2”
4-1/2”
4-1/2”
4-1/2”
5”
5”
5”
5”
5”
5”
7”
7”
7”
7”
7”
7”
MAX
RPM
13,200
13,200
13,200
13,200
13,200
13,200
12,200
12,200
12,200
12,200
12,200
12,200
8,400
8,400
8,400
8,400
8,400
8,400
ARBOR
RECOMMENDED FOR
GRIT
7/8”
5/8”-11
7/8”
5/8”-11
7/8”
5/8”-11
7/8”
5/8”-11
7/8”
5/8”-11
7/8”
5/8”-11
7/8”
5/8”-11
7/8”
5/8”-11
7/8”
5/8”-11
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
Coating Removal
35
35
50
50
80
80
35
35
50
50
80
80
35
35
50
50
80
80
VEXTRA
*See page 16 for HSG-125 High-Speed
Angle Grinder
*See page 15 for ECG-125, the Ultimate
High Performance Grinder
*See page 26 for Ecoguard Type G,
Dust Collection Cover for Grinding
Applications
www.alpha-tools.com
Alpha® VFlex Flexible Sanding Disc
GRINDING
General Purpose Flexible Sanding Disc
The VFlex sanding disc is perfect for paint, coating, oxide and rust removal, grinding burr
and chamfering on the edge of steel, stainless steel and contoured surfaces. The VFlex
has a flexible, rubber-sandwiched cushion body that dramatically reduces unpleasant
noise and vibrations. The disc follows the surface curve with ease
as well as offers a long life and high-performance reducing
downtime replacing tooling. The VFlex is also ideal to shape
natural and engineered stones and glass. The VFlex sanding
disc is available in 5’’ and 7” with 7/8” arbor or with 5/8”-11
zinc hub.
FEATURES
Cushioned to reduce noise and vibration
VFLEX
r ubb er
layer
stainless
steel shank
PART NO. SIZE
MAX
RPM
ARBOR
RECOMMENDED
GRIT
FOR
VDF5035
VDF503H
VDF5050
VDF505H
VDF5080
VDF508H
VDF7035
VDF703H
VDF7050
VDF705H
VDF7080
VDF708H
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
5,000
7/8”
5/8”-11
7/8”
5/8”-11
7/8”
5/8”-11
7/8”
5/8”-11
7/8”
5/8”-11
7/8”
5/8”-11
General Purpose
General Purpose
General Purpose
General Purpose
General Purpose
General Purpose
General Purpose
General Purpose
General Purpose
General Purpose
General Purpose
General Purpose
5”
5”
5”
5”
5”
5”
7”
7”
7”
7”
7”
7”
35
35
50
50
80
80
35
35
50
50
80
80
fl e x ib le s andw i c h const r uction
14
Alpha® ECG-125
HAND TOOLS & ACCESSORIES
The Ultimate High Performance Grinder with a Built-in-Vacuum System
The Alpha® Ecogrinder is the ideal high performance grinder
with a built-in vacuum system. It is designed for continuous
production in fabrication shops as well as job sites. The
Alpha® Ecogrinder ensures a virtually dust-free environment
without the use of an external vacuum system or expensive
dust collector. Its unique slide cover allows the Ecogrinder
grinding wheel to grind up to the wall. Opening the slide
cover exposes the diamond cutting edge without reducing
the vacuum effect. When combined with our manual height
adjustment flange assembly, the Ecogrinder can accommodate any 5” grinding wheel with a 7/8” arbor. Whether
you are grinding natural stone, concrete, or any masonry
materials, the Alpha® Ecogrinder is the tool for you!
Specifications:
Equipment Included:
Rating...............................110 / 220 Volts
Amperage.......................................10.25
Power...........................................1050W
No-load Speed (min-1)...........8,700 RPM
Weight...........................12.70 lbs / 3.3 kg
Arbor.................................7/8” / 22.23mm
Wheel Size.............................5” / 125mm
ECOGRINDER
•Dust Bag
•Dust Hose
•Dust Gate w/ Anti Back Flow
Flap
•Spring Loaded Flange
Assembly
•Extra Carbon Brush Set
•Open End Spanner Wrench
•Pin Spanner Wrench
•Top Handle
•Fan Belt Set (2pcs)
•5” Grinding Wheel (DSQ0500)
PART NO.
DESCRIPTION
ECG-125
Ecogrinder - 110V
ECG-225
Ecogrinder - 220V
133544
Dust Bag (17” x 13-1/2” x 12”)
890001
Manual Height Adjustment Flange Assembly
ECGKIT125*
Kit (Ecogrinder/Caddy/Carriage Kit) 110V
ECGKIT225*
Kit (Ecogrinder/Caddy/Carriage Kit) 220V
ECO-CAR
(sold separately see page 16 for details)
801392
Dust Bag for Carriage (16” x 13-1/2 x 8”)
Dust Bag Carriage
* ECGKIT125 / ECGKIT225 comes fully assembled.
SEGMENTED GRINDING CUP WHEEL
This wheel is available in two arbor sizes: 26mm square arbor grinding
wheel designed to be used with our patent pending spring loaded flange
assembly, and a 7/8” arbor for endusers who want to run a different
grinding wheel on their Ecogrinder with our manual height adjustment
flange assembly. When used with the Alpha® Ecogrinder, this grinding
wheel is ideal for surface preparation after removal of floor covering
materials such as
PART NO.
SIZE
MAX RPM
ARBOR
ceramic tiles, as well
a s smoothing the underside
DSQ0500
5”
12,200
26mm
of concrete countertops.
DEC005
5”
12,200
7/8”
15
www.alpha-tools.com
Alpha® HSG-125
The Ultimate Workhorse for Tile Contractors
HAND TOOLS & ACCESSORIES
Alpha Professional Tools® introduces the new HSG-125
High-speed Angle Grinder. This 5” grinder has a powerful
7.2 Amp (800W) motor with 9,700 rpm. The HSG-125 is
equipped with a standard 5/8”-11 spindle and two sets
of flange/lock nut sets (7/8” and 20mm arbors) in order
to accommodate 4”, 4-1/2” and 5” diameter blades. The
Alpha® HSG-125 is versatile and can be used wet or dry.
Use the HSG-125 as a dry application, and combine the
grinder with the optional, Alpha® Ecoguard system, to
create a dust-free operation eliminating unnecessary
cleanup. The Ecoguard comes in three types: Type C
and W for cutting and Type G for grinding.
For wet applications, the HSG-125 can be equipped
with the optional Alpha® Universal Safety Guard Kit
(GCWKIT), for use with an Alpha® Groove Cutter or with
the Alpha® Wet Blade Cutting Kit (WBCKIT) for use with
cutting blades, including curve cutting and flush mount.
The Alpha® HSG-125 is more than just a grinder, it is
the ultimate workhorse for Decorative Concrete
Contractors, Stone Fabricators and Tile
installers!
HSG-125
*See page 5 for the Eclipse II Blade for General Purpose Cutting
*See page 25 for Ecoguard Type M for Metal Cutting
*See page 26 for Ecoguard Type G for Grinding Applications
*See page 27 for Ecoguard Type C for Cutting Applications
*See page 28 for Ecoguard Type W for Wider Kerfed Blades
WBCKIT
PART NO.
HSG-125
DESCRIPTION
5” High Speed Angle Grinder - 115V
GCWKIT
Universal Safety Guard Kit
WBCKIT
Wet Blade Cutting Kit
GCWKIT
Specifications:
Rating.........................................115 Volts
Amperage........................................ 7.2A
Power..............................................800W
Speed.....................................9,700 RPM
Weight.............................3.52 lbs / 1.6 kg
Spindle..........................................5/8”-11
Equipment Included:
•
•
•
•
•
•
Protective Cover w/ Clamp Screw
Side Handle
Pin spanner Wrench 34 mm
Extra Carbon Brush Set
Inside Flange and Locking Flange Set with 7/8” Arbor
Extra Inside Flange & Locking Flange Set with 20mm Arbor
16
Alpha® WDP-120
HAND TOOLS & ACCESSORIES
The Ultimate Polisher for Decorative Concrete Contractors
*Optional accessory / sold separately
FLEXIBLE CONNECTOR HOSE
The ultimate Polisher for Decorative Concrete
Contractors. Introducing the Alpha® WDP-120, a Wet/
Dry Variable Speed Surface Polisher designed for
all decorative concrete applications, including edge
polishing. This Hybrid Polisher provides the best
quality polish on concrete countertop surfaces when
used with water. The included Ecoguard attachment
minimizes the amount of water splashed and the inline GFCI will provide safety and protection. A vacuum
cleaner can also be attached to the Ecoguard for dry
concrete floor polishing without creating dust. By
removing the Ecoguard’s Front Cover and attaching
the Magnetic Plate, you can polish right up to the wall.
The heavy duty step-down gear system makes this
Polisher powerful even when used at the lower rpm
range. If you are a decorative concrete contractor,
this is the perfect tool for you.
Wet
WDP-120
Dry
(Shown with Flexible Connector
Hose / sold separately)
PART NO.
DESCRIPTION
WDP-120
Wet/Dry Concrete Polisher - 120V
Specifications:
Equipment Included:
• Ground Fault Circuit Interrupter
• Water Valve and Hose
Rating.......................................120 Volts
• Faucet/Garden Hose Adapter
Amperage.......................................... 7A
• Wrench
Power.............................................800W
• C-Handle
Speed (Variable)............500~2800 RPM
• Side Handle (reversible)
Weight............................7.3 Lbs / 3.3kg
• Extra Carbon Brush Set
Spindle........................................5/8”-11
• Ventilation Cap
• Ecoguard Type G
• Carrying Case
*See page 26 for Ecoguard Type G for Grinding Applications
17
www.alpha-tools.com
Alpha® VSP-120
HAND TOOLS & ACCESSORIES
Variable Speed Wet Polisher
Alpha® has improved the popular VSP wet polisher
series with new features to perform above and beyond
your expectations! The new VSP-120 comes with
variable speed control switch with an automatic speed
feed-back system to maintain consistent RPMs with
or without a load. This switch has also expanded
the usable RPM range from 500 RPM to 2,800 RPM.
The new RPM range reduces heat build-up when
polishing Engineered Stone, which eliminates burning
or scorching the work piece. Alpha® has also added
a Splash Guard that can be trimmed to adjust the
height for the best comfort and protection. Every stone
fabricator should try the new VSP-120 variable speed
wet polisher to achieve the best performance and high
quality results.
VSP-120
PART NO.
DESCRIPTION
VSP-120
Variable Speed Wet Polisher - 120V
VSP-230
Variable Speed Wet Polisher - 230V
SIDE HANDLE
Specifications:
Rating.................................120/230 Volts
Amperage........................................... 7A
Power..............................................800W
Speed (Variable)..............500~2800 RPM
Weight..................................7.3lbs/3.3 kg
Spindle..........................................5/8”-11
Equipment Included:
• Ground Fault Circuit Interrupter
• Water Valve and Hose
• Faucet/Garden Hose Adapter
• Wrench
• C-Handle
• Side Handle (reversible)
• Extra Carbon Brush Set
• Ventilation Cap
• Carrying Case
• Splash Guard w/Band Clamp
18
Alpha® AWP-158
HAND TOOLS & ACCESSORIES
Portable Electric Polisher
The new generation of electric wet polishers, the AWP-158, is designed for polishing, shaping,
core drilling and light grinding. This 7.8 amp, 800-watt, 3,000 RPM machine is a powerful
workhorse suitable for use in the shop or on the job site.
The AWP-158 features several improvements over previous generations of polishers. In
addition to the increased power and spindle speed, there are two types of handles included:
a side handle for edge profiling and polishing and a “C” handle for core drilling and flat surface
polishing. There is a flat polishing caster designed to improve stability during scratch removal
operations for a better final finish. The AWP-158 is double insulated and equipped with a
power cord that is 10 feet long and has a built-in GFCI (Ground Fault Circuit Interrupter)
for safety. Also for safety and abrasive longevity, the polisher has a center water-feed and
water supply with convenient garden hose attachment. All these components are packed in a
handy carrying case suitable for transporting and storing the AWP-158 and its accessories.
Designed to perform polishing and several other operations, the AWP-158 is suitable for use
with the Alpha® DS Style Shaping Wheel, the Alpha® Profiler and Alpha® Core Bits, as well as,
the entire line of Ceramica polishing pads. This is a must-have tool for all fabricators/installers
of concrete, granite, marble, engineered stone and porcelain slab and all tile contractors.
Specifications:
Rating.................................110/220 Volts
Amperage.................................... 7.8/3.8
Power.............................................800W
Speed (no load) ...................3,000 RPM
Weight..................................6lbs/2.72 kg
Spindle.................................5/8”-11/M14
PART NO.
DESCRIPTION
AWP-158
ElectricPolisher-110V
Equipment Included:
• Ground Fault Circuit Interrupter
• Water Valve and Hose
• Faucet/Garden Hose Adapter
• Wrenches
• C-Handle
• Side Handle (reversible)
CASTER
• Extra Carbon Brush Set
• Caster Assembly
AWP-158
C-HANDLE
SIDE HANDLE
19
*See page 33 for Ceramica Dry Polishing Discs
*See page 34 for Ceramica Edge Wet Polishing Discs
*See page 35 for Ceramica EX Wet Polishing Discs
www.alpha-tools.com
Alpha® AIR-300
New Generation of Air Polisher for Fabricators
HAND TOOLS & ACCESSORIES
The Alpha® AIR-300, designed for unique applications that are difficult to accomplish using
conventional polishers. A smaller version of the well-known Alpha® AIR-658, the AIR-300
is ergonomically designed to fit comfortably in
your hand and only weighs 1.6 pounds reducing
fatigue from long hours of polishing. The smaller
design is easy to maneuver and produces
flawless sink rims and bowls. The Alpha® AIR300 accepts 3” and 4” discs along with 2” and
AIR-300
3” rubber pads. It requires a 3HP compressor
with air consumption of 10 CFM and air pressure
between 85–95 PSI. The Alpha® AIR-300
Polisher easily converts from in-shop to on-site;
included
a must have for all fabricators.
PART NO.
DESCRIPTION
AIR-300
Mini Air Polisher
AIR-008
Lubrication Oil for Pneumatic Tools (8oz.)
(Shown with optional Backer Pad / sold separately)
Specifications:
Equipment Included:
Air Consumption.................10CFM (280 ℓ/ Min)
Air Pressure.... .......... 87 PSI (0.6Mpa (6 bar))
Speed (no load)..............................5,800 RPM
Weight........................................1.6 lbs/.731kg
Spindle...................................................5/8”-11
Air Inlet..............................................1/4” BSPP
Water Inlet........................................ 1/4” BSPP
• Air Lead Hose - 10’ (3m)
• Water Hose - 10’ (3m)
• Lubrication Oil (1oz / 30cc sample bottle)
• Faucet/Garden Hose Adapter
• Wrench (17mm)
20
Alpha® AIR-658
HAND TOOLS & ACCESSORIES
A High Performance Pneumatic Polishing Tool
Alpha AIR-658 is a high performance, pneumatic
polishing tool designed for continuous production use.
It has a centrally water-fed distribution system that
provides the best finishes possible. For years, Alpha
Professional Tools® produced model number AIR558, which was known for its high quality and durable
construction. After reviewing the design and application
of this tool, we ergonomically designed the AIR-658,
as its successor, with many new features. Fabricators
love its compact design and low weight. They also know
that it is very durable under some of the most adverse
conditions that a tool is required to operate in. Shop
workers easily use this tool with little or no fatigue. With a
speed of 3,500 RPM and convenient size, this polisher is
the ideal polishing tool for the professional shop worker.
Alpha® AIR-658 is a lightweight tool that accepts 3”, 4”
or 5” discs. It is a “plug and play” tool, which includes
the side handle, pneumatic lubrication oil, and the hoses
for air, water and exhaust along with the appropriate
fittings. With sealed bearings to increase life and a rear
exhaust system, Alpha® AIR-658 is designed to last a
long time. Requirements for this tool are a cast iron 2
stage compressor, a large reservoir, 5 HP for each tool.
Air consumption is 15 CFM and required air pressure is
87 PSI, however the range of 85-90 PSI is acceptable.
With a weight of only 2.64 lbs, Alpha® AIR-658 is the
best addition to any stone shop.
®
PART NO.
DESCRIPTION
AIR-658
Air Polisher
AIR-008
Lubrication Oil for Pneumatic Tools (8oz.)
AIR-658
*See page 10 for Wet Core Bit Application
*See page 7 for a Profiler that creates a perfect Roundover
LUBRICATION
OIL
21
included
Specifications:
Equipment Included:
Air Consumption............15CFM (420 ℓ/ Min)
Air Pressure............. 87 PSI (0.6Mpa (6 bar))
Speed (no load)............................3,500 RPM
Weight.......................................2.64lbs/1.2kg
Spindle.................................................5/8”-11
Air Inlet...........................................1/4” BSPP
Water Inlet..................................... 1/8” BSPP
• Air Lead Hose - 10’ (3m)
• Water Hose - 10’ (3m)
• Silencer/Exhaust Muffler
• Side Handle (reversible)
• Lubrication Oil (1oz / 30cc sample bottle)
• Faucet/Garden Hose Adapter
• Wrench (22mm)
www.alpha-tools.com
Alpha® Backer Pads
ACCESSORIES
Alpha® Rigid Backer Pads eliminates the wavy finish
by keeping the Ceramica flat to the polished surface.
Fabricators and tile contractors use it with good results,
restoration workers find that the rigidness of the pad
RIGID BACKER PAD
enables them to work in small areas such as corners or
staircases. Large machine manufacturers recommend flexible diamond discs for use on
their automatic edge polishing machines specifically for the bullnose application using the
Alpha® Rigid Backer Pad. Available in 3”, 4”
and 5” sizes, the Rigid Backer Pad is exclusive
PART NO.
MAX RPM
TYPE
SIZE
to Alpha Professional Tools®. It comes in the
GP35/8RG
3”
6,000
RIGID
standard 5/8”-11 thread commonly found on
most polishing tools today. Some metric sizes
GP45/8RG
4”
6,000
RIGID
are available on request.
GP55/8RG
5”
6,000
RIGID
The Alpha® Flexible Backer Pads are hook and loop backed
and will accept Ceramica, Sandpaper and Felt Wheels.
Extremely flexible, these backer pads are ideally suited
for tough contours and inside curves, allowing the user
to get
FLEXIBLE BACKER PAD
in
tight
PART NO.
MAX RPM
TYPE
SIZE
corners with ease. Available in 2”, 3”, 4”,
GP25/8PD
2”
6,000
FLEXIBLE
and 5” versions, these pads come with
GP35/8PD
3”
6,000
FLEXIBLE
the standard 5/8”-11 thread, commonly
seen on most of the polishing tools
GP45/8PD
4”
6,000
FLEXIBLE
in use today. Some metric sizes are
GP55/8PD
5”
6,000
FLEXIBLE
available on request.
The Alpha® GV Backer Pad is the first hook and loop backer pad
designed to fit on the GV5000’s unique spindle and attachment
configuration. This backer pad is ideal for bullnosed edges and flat
surfaces. Marble fabricators and tile contractors can now utilize hook
and loop backed products such as Alpha® Sandpaper and Alpha®
Felt Wheels on their GV5000 polisher with excellent results. The
Alpha® GV Backer Pad provides just the right amount of flexibility to
successfully polish curved areas yet remains rigid enough to polish
flat surfaces. The Alpha® GV Backer Pad will accept other types of
hook and loop backed products, thus making this tool
a
truly versatile machine that can be used for stone, tile, metal, wood and
glass. If you own or plan on owning a Makita GV5000 Sander, the
Alpha® GV Backer Pad is for you.
PART NO.
MAXIMUM RPM
DESCRIPTION
GV4MPPD
4,500
4” Adapter pad to fit
Makita® GV5000 Sander
GV5MPPD
4,500
5” Adapter pad to fit
Makita® GV5000 Sander
M8-1.25 Male
M8-1.25 Male
GV BACKER PAD
22
Alpha® Ecocaddy
ACCESSORIES
Stand-up Grinder Caddy for the Ecogrinder
The Alpha® Ecogrinder Caddies allow the operator
to stand and not have to work on their knees
when grinding and sanding concrete, terrazzo and
masonry products or doing surface preparation
work. The height adjustment mechanism allows
the caddy to be adjusted to accommodate
individual users. The unit is available in two
versions for both Ecogrinders (110V and 220V).
A halogen light shines above the grinding area to
show scratches in dark areas. This light can be
turned on/off independently.
Attach the Alpha® Dust Bag Carriage directly to
the Ecogrinder and utilize the Ecogrinder’s built-in
vacuum system, making the operation simple, easy
and virtually dust-free!
For a complete floor polishing system, combine the
Alpha® Ecogrinder, Caddy, Dust Bag Carriage and
polishing tools. Installation is simple, using only an
adjustable wrench to complete.
FEATURES
• Neatly organize power cords and control via the Caddy.
• Height can be adjusted to accomodate individual operator stance.
PART NO.
ECOCADDY
DESCRIPTION
ECOCAD125
Caddy for Ecogrinder 110V
ECOCAD225
Caddy for Ecogrinder 220V
(Shown with optional
Ecogrinder / sold separately)
Alpha® Dust Bag Carriage
The Alpha® Dust Bag Carriage was designed
as a support to hold the dust bag so as to
not interfere with the operation of the tool
during use. The front swivel wheel allows
for easy maneuvering when working on flat
services. The dust bag is easily secured to the
dust carriage by tying each end to the support rings.
DUST BAG CARRIAGE
*See page page 15 for ECG-125 the ultimate Grinder with built-in Vacuum System
*See page 1 for the Ecocutter for all your dry cutting applications
PART NO.
DESCRIPTION
ECO-CARS
Dust Bag Carriage
801392
Dust Bag for Carriage (16” x 13-1/2 x 8”)
23
www.alpha-tools.com
Dry Tile Bullnose Kit
Create A Factory Finish Without The Mess
ACCESSORIES
The Alpha® Dry Tile Bullnose Kit was designed to create a bullnose edge on tile or stone
and polish it to a factory quality finish with a few simple hand-held tools without the mess of
dust or water.
•
•
•
•
•
Virtually dust-free shaping and polishing application!
Polishing speed increased by 33% as compared to 4” system!
Polishing pad life is double that of the 4” disc!
Convenient and fast installation of tile as no drying time is needed!
System can be also be used wet which can increase quality, cost-performance and minimize the water splash!
The kit includes:
1.
2.
3.
4.
5.
6.
The newly developed 5” wet/dry variable speed electric polisher (WDP-120)
A new vacuum-brazed grinding Vexcel Disc (VDR505H)
Backer pad (GP55/8RG)
Set of 5” Ceramica Dry polishing discs
(CD50KIT).
A DVD showing the kit in action as well as
other related products is included.
Also, you can add an optional HEPA Vacuum
for a safe, environmentally-friendly application.
The 5” diameter tooling promotes a fast,
accurate operation for edge finishing.
PART NO.
DESCRIPTION
5480-1220
Dry Tile Bullnose Kit
5480-1225
Dry Tile Bullnose Kit
w/HEPA Vacum
DRY TILE BULLNOSE KIT
24
Alpha® Ecoguard Type M
ACCESSORIES
High-Speed Angle Grinder Solution for Cutting Metal
Introducing the Ecoguard Type M a.k.a. Spark Buster for
making it possible to utilize a high-speed angle grinder
for metal cutting applications. When equipped with a
Carbide-tipped blade, the Ecoguard Type M eliminates
the dangerous kick-back on hand-held grinders as well as
minimizes sparks, debris and odor. This new system cuts
angle iron, c-channel, conduit, schedule 40, spiral duct,
galvanized roofing, metal studs, rebar, stainless steel,
aluminum plates and bars, steel plates, threaded rods and
unistrut. Perfect for all your metal cutting needs!
ECOGUARD TYPE M
®
CarBite
Part No. TCT5030
Max. RPM: 9,600
Diameter:
5”
Arbor:
7/8”
Thickness: 1.6mm
No. of Teeth:
30
dry
tio .
tec B7
pro NSI
eye h A
ear wit
ys w mply
o
Alwa
Safety Warning: duct. C
pro
when using this
CARBITE BLADE*:
•
Specially Formulated Carbide Teeth for Long Life
•
Especially Designed For Ecoguard Type M
•
Minimizes Sparks, Debris, Burr and Odor
•
Modified Alternate Top Grind for Clean Smooth Cuts
•
High-backed Shoulder for Increased Strength
Behind Each Tip
use only
The Ultimate Dry Blade for Mild Steel & Stainless Steel
!
ly
na
n
1 a d pro
pe
nd
OS r pers
on
HA
Req al safety
equipment
uire
ment
s.
e
ar
gu
e
Us
ith
o
Ec
d
p
Ty
M
on
w
CARBITE BLADE
PART NO.
SIZE
THICKNESS
MAX RPM
ARBOR(S)
DESCRIPTION
ECOGRDSB
—
—
—
—
Ecoguard Type M (Spark Buster)
TCT4530
4-1/2”
1.6mm
13,000
7/8”
Carbite Carbide Blade
TCT5030
5”
1.6mm
9,600
7/8”
Carbite Carbide Blade
ECOM45KIT
4-1/2”
1.6mm
13,000
7/8”
Ecoguard M/Carbite Blade Kit
ECOM50KIT
5”
1.6mm
9,600
7/8”
Ecoguard M/Carbite Blade Kit
*Do not use this Carbide Tipped Saw Blade on a High-speed Angle Grinder without attaching to
the Alpha® Ecoguard Type M.
25
www.alpha-tools.com
Alpha® Ecoguard Type G
ACCESSORIES
For Grinding Applications
Alpha® introduces a new Ecoguard designed for collecting dust
when using the Alpha® HSG-125 or other High-Speed Angle
Grinders. The Ecoguard Type G is intended for use when
grinding with wheels up to 5” in diameter. It is
made of high-quality construction for heavy-duty
applications. This dust collection cover creates a
virtually dust-free environment when connected
to a vacuum. It also includes several connectors
and spacers to easily allow for use on many common
grinders.
PART NO.
DESCRIPTION
ECOGRDGR
Ecoguard Dust Collection Cover Type G
500026
Flexible Connector Hose - 18”
ECOGKIT
Ecoguard G & Connector Hose Kit
TYPE G
FOR GRINDING
APPLICATIONS
*See page 16 for HSG-125 High-Speed Angle Grinder
*See page 27 for Type C Ecoguard for Cutting Applications
*See page 15 for the Segmented Grinding Cup Wheel for surface preparation
HSG-125 attached to
Ecoguard Type G
Segmented
Grinding Cup Wheel
HSG-125
Blade Installation
FLEXIBLE CONNECTOR HOSE
Ecoguard
Type G
*Optional accessory / sold separately
26
Alpha® Ecoguard Type C
ACCESSORIES
A Hybrid Dust Collection Cover For Cutting Applications
Alpha® introduces the new Ecoguard, designed for
collecting dust when using our High-Speed Angle
Grinder. The Ecoguard Type C is for used when
cutting with dry blades up to 5” in diameter. It
is made of high-quality construction for
heavy-duty applications. This hybrid dust
collection cover eliminates the mess and
can be used with or without a vacuum!
PART NO.
TYPE C
FOR CUTTING APPLICATIONS
DESCRIPTION
ECOGRDCT
Ecoguard Dust Collection Cover Type C
201549
Ecoguard C Dust Bag (6.69”x13.77”x.75”)
500026
Flexible Connector Hose - 18”
FEATURES
• Use with or without a Vacuum!
*See page 16 for HSG-125 High-Speed Angle Grinder
*See page 26 for Type G Ecoguard for Grinding Applications
*See page 5 for the Eclipse II Blade a General Purpose Blade for Building Materials
Ecoguard Type C
Eclipse II Blade
HSG-125
HSG-125 attached to
Ecoguard Type C
27
Blade Installation
www.alpha-tools.com
Alpha® Ecoguard Type W
ACCESSORIES
Dust Collection Cover for Wider Blades
Alpha® has expanded its Ecoguard line for cutting applications to include
a dust collection cover for wider blades. Introducing the Ecoguard Type
W. Unlike the Ecoguard Type C which uses a supplied dust collection
bag, the Ecoguard Type W must be used with a vacuum, or other
dust collection system, to successfully collect the dust and larger
particles derived from using wider kerf diamond blades such as
the Alpha® Tuck Pointing or Crack Chasing blades. The Ecoguard
Type W includes three unique features. First is the ability to easily
adjust the cutting depth by using a simple wing nut operation.
The second is the nose guide that indicates the cut line and the
third is the ability to view inside the cover, while cutting,
due to the clear polycarbonate material construction. This
TYPE W
FOR CUTTING APPLICATIONS
feature is quite useful during Tuck Pointing applications.
Using the Ecoguard Type W with the HSG-125 The HSG-125 has two flange/lock nut
sets included that allow the use of 4”, 4-1/2”and 5” diameter blades. It can also be used
on other manufacturers’ machines by simply changing
the connector.
PART NO.
DESCRIPTION
ECOGRDCW
Ecoguard Dust Collection Cover Type W
500026
Flexible Connector Hose - 18”
ECOWKIT
Ecoguard W and Flexible Hose Kit
*See page 16 for HSG-125 High-Speed Angle Grinder
*See page 26 for Type G Ecoguard for Grinding Applications
FLEXIBLE CONNECTOR HOSE
*Optional accessory / sold separately
Type C
Type W
28
ACCESSORIES
Alpha® HEPA Dry Vacuum 10-Gal (DRY USE ONLY!)
Certified HEPA Vacuum
Equipped with a powerful 2-hp motor and an extra large capacity HEPA
filter system, the HEPADV10 Dry Vacuum offers the air flow efficiency
of vacuums costing three times as much. The certified HEPADV10
is manufactured to the same high quality standards as you expect
from Alpha®. It includes a high-efficiency ‘Drop-in’ style HEPA filter
individually certified to have a minimum efficiency of 99.97% at .3
microns (based on 1EST‑RP‑CC007 particle count test method).
OTHER FEATURES INCLUDE:
• A ‘never-clog’ dacron bag for superior pre-filtration
• Blow molded poly canister with low center of
gravity design prevents tipping
• Positive locking, full swivel hose connection
system for easy handling and operation
• Low noise allows for use in sound sensitive
areas.
• Includes complete set of tools
• 50 foot power cord
• 3 labels to choose from: HEPA, Asbestos and Lead
• Automatic start with tool triggered control
• 10 ft. x 1.5 in. crushproof hose
• 105” Water Lift
• 110 CFM
OPTIONAL FLOOR CLEANING KIT
• 5 ft. two-piece metal wand
• 17 in. crevice tool
• Floor brush tool
• Round dusting brush
29
HEPADV10
FLOOR CLEANING KIT
PART NO.
HEPADV10
HEPA10KIT
HEP100511
HEP100483
HEP777510
DESCRIPTION
HEPA Dry Vacuum 10-Gal
HEPA Vacuum 10-Gal / Accessories Kit
Floor Cleaning Kit
HEPA Filter Assembly
HEPA Paper Bag (10pk)
www.alpha-tools.com
Alpha® Apron
ACCESSORIES
Flexible, Convenient and Waterproof
Want to be the sharpest tool in the box?
Wear the new Alpha® Apron! This trendy
design is not only fashionable, it will also
protect and keep you dry. Made of a
strong vinyl material, the Alpha® Apron is
lightweight, durable, comfortable and easy
to wear. A flexible waistband keeps it in
place (no strings or knots to tie). It can be
used by anyone polishing with water or to
keep the dust associated with dry polishing
off your clothing. One size fits all!
PART NO.
APRON3012
DESCRIPTION
Apron
BACK
Alpha® Safety Glasses
The Alpha® Safety Glasses have a lightweight
frame with padded temples. The wrap around
design provides superior protection while assuring
a comfortable wear for the entire work day.
FRONT
ClearAnti-ScratchLenses
Adjustable Side Arms
(length and height)
Soft Rubber Nose Bridge
Lightweight Wrap Style
Frame
Contour Arms
Rubber Tipped Arms
PART NO.
173002
173008
DESCRIPTION
Safety Glasses
Safety Glasses
QUANTITY
12 pcs
Single Pair
30
Alpha® 4-Step Concrete Polishing System
HAND POLISHING SYSTEM
Creates a Flat Smooth Surface Without the Waves
Alpha® has developed a new series of polishing discs specifically designed for polishing
concrete countertops. The Alpha® 4-Step Concrete Polishing System includes 4 SemiFlexible Discs. Each disc is laminated with rubber and equipped with the Variable Drive
System for better control during polishing. Steps 1 and 2 use Semi-Flexible Metal discs
which have a metal bond that prolongs the life of the disc thus improving the overall cost of
polishing. Steps 3 and 4 use the Semi-Flexible Resin discs which provide the best possible
professional finish on concrete without the uneven surface. These discs are easily changed
for
increased
production
capabilities. The Alpha® 4-Step
Concrete
Polishing
System
is a winning combination of
cost-effectiveness and superb
results!
U B RE Q U
I
SH
RE
VD
4-STEP CONCRETE
POLISHING DISCS
D
PART NO.
SIZE
ARBOR
MAX RPM
DESCRIPTION
QSF501M
QSF502M
QSF503R
QSF504R
QSF5KIT
5”
5”
5”
5”
5”
7/8”
7/8”
7/8”
7/8”
7/8”
4,000
4,000
4,000
4,000
4,000
Semi Flexible Metal - Step 1
Semi Flexible Metal - Step 2
Semi Flexible Resin - Step 3
Semi Flexible Resin - Step 4
Assortment - 1 each
PART NO.
ARBOR
MAX RPM
DESCRIPTION
VDSHUB
7/8”
12,000
Variable Drive Hub
110301
5/8”-11 Threaded
12,000
Variable Drive Flange
210301
5/8”-11 Threaded
12,000
Variable Drive Lock Nut
* Variable Drive System Hub is required for attachment
** Variable Drive Flange/Lock Nut Set required for use with the VSP-120
31
www.alpha-tools.com
Alpha® Wet/Dry Concrete Polishing System
HAND POLISHING SYSTEM
Concrete Polishing Wet/Dry and by High/Low RPMs
Alpha® introduces the universal concrete surface polishing system for concrete contractors
who work on decorative surfaces. This system creates a superior surface polish on concrete
whether you are using them wet or dry and by high or low rpms. The WDC Series is available
in grits of 60, 150, 300, 500, 1000, 2000 & 3000. Thanks to the patented Alpha® Variable
Drive System, you can polish using any polisher, or high-speed angle
grinder with the proper dust shroud. In addition, Alpha® offers a
Variable Drive with a Square Adapter that is designed for use
on the Ecogrinder. The Ecogrinder allows you to perform the
entire process (grinding through polishing) virtually dust-free
without the need for an external vacuum. Also, when using
the optional Ecocaddy with the Ecogrinder, you can avoid
working on your knees! (*discs require a VDSHUB)
PART NO.
WDC50060
WDC50150
WDC50300
WDC50500
WDC51000
WDC52000
WDC53000
WDC5KIT
SIZE MAX RPM
5”
5”
5”
5”
5”
5”
5”
5”
11,000
11,000
11,000
11,000
11,000
11,000
11,000
11,000
TYPE
GRIT
Semi Flexible
Semi Flexible
Semi Flexible
Semi Flexible
Semi Flexible
Semi Flexible
Semi Flexible
Semi Flexible
COLOR
60
Blue
150
Yellow
300
Orange
500
Red
1000 Dark Green
2000 Light Green
3000
Brown
ALL Assortment
PART NO.
ARBOR
MAX RPM
DESCRIPTION
VDSHUB
7/8”
12,000
Variable Drive Hub
Variable Drive Hub Square
VDSHUBQ
Square
12,000
110301
5/8”-11 Threaded
12,000
Variable Drive Flange
210301
5/8”-11 Threaded
12,000
Variable Drive Lock Nut
WET/DRY CONCRETE SURFACE
POLISHING DISCS
*See page 31 for VDSHUB
32
Alpha® Ceramica Dry
HAND POLISHING SYSTEM
Dry Polishing for all Natural Stones and Cement Based Composites
Alpha® has expanded its line of polishing pads to
now include a dry version of the superior Ceramica
Resin. These new pads utilize a new process to
make the diamond layer thicker, thus creating better
quality results and a longer life than typical dry resin
pads. Ceramica Dry is perfect for all natural stones
and cement-based composites such as concrete and
terrazzo. They are hook and loop backed and utilize
Alpha® Backer Pads. They are available in 4” and 5”
sizes and have grits of 60, 200, 500, 1000, 2000, and
3000. The grit sequence is specifically formulated to
provide the best possible finish.
FEATURES
*See page 22 for Flexible Backer Pads
*See page 19 for a Portable Electric Polisher
• The Best Resin Pad for all Natural Stones and
Cement-based composites.
HOOK AND LOOP
4”
5”
GRIT
COLOR
PART
NO.
PART
NO
60
BLUE
CD40060R
CD50060R
200
YELLOW
CD40200R
CD50200R
500
RED
CD40500R
CD50500R
1000
DARK GREEN
CD41000R
CD51000R
2000
LIGHT GREEN
CD42000R
CD52000R
3000
BROWN
CD43000R
CD53000R
ALL
Assortment
CD40KIT
CD50KIT
33
CERAMICA DRY FOR
ALL NATURAL STONES
CERAMICA DRY KIT
www.alpha-tools.com
Alpha® Ceramica Edge
HAND POLISHING SYSTEM
Wet Polishing for all Natural Stones and Cement Based Composites
Alpha® delivered the first flexible diamond polishing discs
called Ceramica Polishing System to the US stone
industries that made what seemed to be an impossible
task possible. Ceramica was adapted in the monument
fabrication shop first to achieve the highest degree of
polish with ease that lasts for generations which became
the standard. Now introducing Ceramica EDGE, that is a
re-formulated version for stone fabricators who produce
granite countertops day in and day out. This new all-resin
CERAMICA DRY FOR
bond polishing system polishes granite edges fast and
ALL NATURAL STONES
produces a high-quality polish that matches the edge to the
slab surface. It is also recommended for concrete. The discs are backed with a “hook & loop”
material allowing for quick disc changes and use on popular hand-held wet polishers. The grit
sequence of 80, 150, 300, 500, 1000, #2000 and #3000 that can be interchanged with any
other Ceramica 3-part polishing system. Choose Ceramica EDGE to save time & money and
gain that Competitive EDGE!
FEATURES
HOOK AND LOOP
GRIT
4”
COLOR
PART
NO.
CE40080R
80
BLUE
150
ORANGE
CE40150R
300
YELLOW
CE40300R
500
RED
CE40500R
1000
DARK GREEN
CE41000R
2000
LIGHT GREEN
CE42000R
3000
BROWN
CE43000R
ALL
Assortment
CD40KIT
• Cost-effective flexible Solution! High-quality shine!
*See page 19 for a Portable Electric Polisher
*See page 20 for a New Generation of Air Polisher
*See page 21 for a AIR-658 Pneumatic Polishing Tool
*See page 22 for Flexible Backer Pads
CERAMICA EDGE KIT
34
Alpha® Ceramica EX
HAND POLISHING SYSTEM
Wet Polishing - All Stones
Alpha®, the manufacturer of the “Original Ceramica Polishing
Discs”, has created the next generation of polishing
discs, Ceramica EX. With the proliferation of engineered
stones, Alpha® recognized the need for polishing
discs that could work effectively on these challenging
new surfacing products. After extensive research and
development, Alpha® established the diamond and bond
formula best suited for today’s engineered stones, the
result: Ceramica EX. Our research determined something
else; Ceramica EX works extremely well on all natural
stones, too. As a result, Ceramica EX can fulfill all
CERAMICA EX FOR
the needs of all stone fabricators; one set of polishing
ALL MATERIALS
pads that can produce a high quality shine on granite,
engineered stone, quartz surfaces, marble (including
hard to polish black and green), terrazzo and porcelain tile and
slab. Ceramica EX pads work quickly to achieve desired results.
They are cost-effective, long-lasting and made from the highest
quality raw materials. As an added bonus, they are priced more
competitively than the original Ceramica. Ceramica EX pads are
extremely flexible, too. They are great for polishing inside corners
and a tight radius. Use the Alpha® 2” Flexible hook and loop Backer
Pad on really tight curves. Available in 3”, 4” and 5” size discs.
FEATURES
• The Best Resin Pad for Engineered Stone and Soft Marble
HOOK AND LOOP
35
*See page 22 for Flexible Backer Pads
CERAMICA EX KIT
3”
4”
5”
GRIT
COLOR
PART
NO.
PART
NO.
PART
NO.
200
YELLOW
EX30200R
EX40200R
EX50200R
500
RED
EX30500R
EX40500R
EX50500R
1000
DARK GREEN
EX31000R
EX41000R
EX51000R
2000
LIGHT GREEN
EX32000R
EX42000R
EX52000R
3000
BROWN
EX33000R
EX43000R
EX53000R
ALL
Assortment
—
EX40KIT
—
www.alpha-tools.com
Alpha® Sandpaper
HAND POLISHING SYSTEM
Inexpensive Alternative Solution for Polishing Stone and Concrete
Alpha® Sandpaper discs consist of a waterproof hook
and loop backed material combined with a silicon
carbide abrasive, which is the perfect combination for
use on concrete, marbles and softer types of natural
stone. Marble fabricators find Alpha® Sandpaper to
be effective and durable. Tile contractors find Alpha®
Sandpaper to be very adaptable to onsite work and
easy to use. Restoration workers can polish wide areas
quickly without difficulty. Alpha® Sandpaper resists
clogging when used wet, thus extending the life of the
disc. The discs can be used dry if necessary and are
very durable. The hook and loop backing makes disc
changes simple. Alpha® Sandpaper can also be used to
polish concrete, glass, metal and wood. Used with our
standard backer pads, our Twistouch backing system or
the GV5000 backer pad, Alpha® Sandpaper is sure to
give you the best results.
For an extra high glossy finish, use the Alpha® Felt
Wheel with a buffing compound to finish the polishing
process.
HOOK AND
LOOP
4”
5”
GRIT
PART
NO.
PART
NO.
80
MP40080
MP50080
120
MP40120
MP50120
240
MP40240
MP50240
320
MP40320
MP50320
400
MP40400
MP50400
500
MP40500
MP50500
600
MP40600
MP50600
MP40KIT
MP50KIT
Assortment
50 pieces per box
GRIT
PART
NO.
PART
NO.
80
SMP40080
SMP50080
120
SMP40120
SMP50120
240
SMP40240
SMP50240
320
SMP40320
SMP50320
400
SMP40400
SMP50400
500
SMP40500
SMP50500
SMP40600
SMP50600
600
SANDPAPER
*See page 22 or GV Backer Pad
*See page 22 for Flexible Backer Pad
5 pieces per pack
36
HAND POLISHING SYSTEM
Alpha® Diamond Hand Pads
Versatile Hand Finishing Tool
Alpha® Diamond Hand Pads are used to perform convenient, on-site polishing, on materials
such as glass, ceramics, marble, granite, concrete, terrazzo and quartz surfaces. This system
is available in two bond types to provide the best possible finish. *May be used for wet or
dry applications.
ELECTROPLATED GRITS:
This type of pad uses nickel plating technology to hold each individual diamond in
place and is available in 60, 150, 300 and
500 grits.
RESIN GRITS:
This type has a finer diamond grit than
electroplated pads. The resin bond is coated
on a special backing material and is available
in 1000, 2000 and 3000 grits best suited for
honing to polishing.
PART NO.
TYPE
GRIT
DHP0060
Electroplated
60
Blue
DHP0150
Electroplated
150
Yellow
Orange
DHP0300
Electroplated
300
DHP0500
Electroplated
500
Red
DHP1000
Resin Bond
1000
Dark Green
DHP2000
Resin Bond
2000
Light Green
DHP3000
Resin Bond
3000
Brown
DHPKIT
37
COLOR
Set of All 7
www.alpha-tools.com
Alpha® Stain Removers
RESTORATION & MAINTENANCE
RSR-2000
Alpha Professional Tools® leads the way with an
innovative product designed to quickly remove
common rust stains from natural stone surfaces or
other types of material such as concrete, brick, terra cotta,
Mexican tile, or other hard porous surfaces. This unique product
comes as a pre-mixed gel in 14‑ounce tubes and is easily applied
to rust stained areas. The RSR-2000 is specially formulated to work
extremely fast and will immediately begin to work upon contact with rust. In
most cases, the RSR-2000 will completely remove a rust stain within 5 minutes
or less. Alpha Professional Tools® has designed this highly efficient product as a nonhazardous chemical that is safe to use and will not harm the environment. Since this product
is spreadable because of its gel format, large areas can quickly be covered in short amounts
of time. A versatile product, RSR-2000 can be used in a variety of areas such as floors,
countertops, vertical surfaces and exterior areas. If you have rust stains, RSR-2000 is the
best product for you.
PART NO.
CONTAINER
FEATURES
• RSR-400G Covers Approximately 4 Square Feet
RSR-040G
1.4oz (40g)
RSR-400G
14oz (400g)
Alpha® Poultice Stain Removers are premixed and are designed for easy application. Simply
mix with water, apply to the stained area and cover with plastic for 24 hours. As the stain
remover dries it draws the stain from the stone. The Alpha® Stain Removers afford an easy
solution to common stain problems and can be used horizontally or vertically on interior
as well as exterior applications. They are available in two types. Each type is designed for
specific types of stains. It is vital that the stain be properly identified before selecting the type
of stain remover. It is also necessary to identify where the stain originated from in order to
prevent it from reoccurring. Difficult stains may require more than one application before the
stain is successfully removed. Alpha® Stain Removers are safe and will not affect the surface
of the stone. Please refer to our technical notes for proper questions and solutions.
Alpha® General Stain Remover
Designed for the removal of most organic based stains, such as, oil,
coffee, tea and food stains. Alpha® General Stain Remover will remove
most common stains with ease.
Alpha® Rust Stain Remover
Designed to remove ferrous oxide (rust) stains caused by iron, copper,
bronze or other metals. It is important to remember that iron is sometimes
present in most types of natural stones and stains from these natural
iron minerals will be difficult, if not impossible, to remove.
PART NO.
FEATURES
• Poultice Covers Approximately 15 Square Feet
CONTAINER
DESCRIPTION
ADGSR-05
5LBS
Organic Based
Oil, Coffee, Tea, Food
ADRSR-05
5LBS
Metal Based
Iron, Rust, Copper,
Bronze
38
Alpha® Moisture Test Kit Starter Package
RESTORATION & MAINTENANCE
Moisture Test Kit for Calculating Vapor Emissions
Alpha® has recognized the growing concerns of floor covering industry professionals
which involves the condition of the subfloor and most specifically, the “invisible” moisture
emission and its effect on the finished layer. The Alpha®
solution for this is the “Moisture Test Starter Package”.
This kit includes an Ecogrinder, to prepare a virtually
dust-free concrete slab surface without a vacuum,
a Calcium Chloride Moisture Test Kit (5 packs)
and a Digital Scale. According to ASTM F 1869,
the moisture test is a required process for any
commercial floor covering installation. Although
the general contractor, the builder, or the owner
should be the responsible party for random
Calcium Chloride tests, a tile contractor should
take the proactive steps to perform the test for
the additional revenue and peace of mind.
*See page 15 for the Ecogrinder
*See page 29 for Hepa Vacuum
*See page 32 for the Wet/Dry Concrete Polishing Discs
PART NO.
MTK005
MDS002
5480-1900
MOISTURE TEST
STARTER PACKAGE
DESCRIPTION
Moisture Test Kit (5pcs)
Digital Scale 200gm Capacity
Moisture Test Starter Package
(inc. Ecogrinder, Moisture Test Kit & Digital Scale)
MOISTURE TEST KIT
39
www.alpha-tools.com
Alpha® Moisture Test Kit
RESTORATION & MAINTENANCE
Step by Step Instructions
Step 1
Use Alpha® Ecogrinder (with dust carriage attached) to remove any foreign
objects and dust from the concrete surface to insure proper adhesion of the
sealant. Strictly follow guidelines given by Occupational Safety & Health
Administration (OSHA).
STEP 2
Weigh the container with the vinyl tape seal at the test location immediately
prior to initiating the test (W1).
Note: Be sure the scale is set to grams, ounce scales will not work for this
test. Weigh to the nearest 0.1 gram and note this initial weight on the top of
the container label using a felt tip pen or permanent marker as well as the
time and date the test was started (T1).
Step 3
Remove the sealing tape from the plastic container. Make sure the tape
does not get dirty or lost since it will be needed to reseal the container at
the end of the test.
Note: For best results, stick the tape on the outer wall of the dome unit
to keep it safe.
Step 4
Peel off the paper protective backing from the black sealant that is around the
dome and discard. Make sure the sealant material does not contact objects or
clothing as it is very sticky and intended to provide a secure, long-lasting seal to
the concrete throughout the duration of the test.
Step 5 & 6
Carefully remove the lid from the container that holds the calcium
chloride crystals. Do not spill the crystals.
Install the test kit on the concrete floor. First, place the open calcium
chloride container on the concrete floor. Make sure the crystals are
relatively level. If any crystals are spilled the test can be invalid.
Step 7
Next, immediately place the dome unit over the center of the dish. Press firmly along
the edges of the sealant material to securely bond the unit to the floor. To test for an
airtight seal, press firmly on the center of the cover. The cover should resist pressure,
if properly sealed.
Allow the test kit to remain undisturbed for a period of 60 to 72 hours. Note the ambient
temperature and humidity at the test area.
Step 8
After 60 to 72 hours, remove the dome with a razor. Retrieve the dish with the calcium chloride and immediately place the lid back on and reseal using saved vinyl
tape. Re-weigh the container on the same gram scale used at the
start of the test. Record weight, date and time (W2) (T2).
Note the weight as final weight (W2). Do not spill any of the calcium
chloride crystals from the container. If any crystals are spilled, the
test must be rerun with a new test kit.
A person using this test kit shall strictly follow the instructions given in the latest
ASTM F 1869 published by American Society for Testing & Materials.
40
Alpha® Kits
The Alpha® has created a series of specialized kits to provide the installer with a great
selection of fabrication tools to efficiently customize project installations.
PART NO. 5480-7350
Pre-Fabricated Granite Starter Kit
PART NO. ECGKIT125 / 225
Ecogrinder Caddy Kit
“Efficiently Customize Project Installations”
Kit Includes: AWS-125, AWS-UCAM, GR‑AG04 GRAG12, DEE005, HR03A+, CCB005, VSP-120, PFB051,
PFZ301, DCB01375, GP25/8PD, GP35/8PD, GP45/8PD,
EX40200R, EX40500R, EX41000R, EX42000R, EX43000R,
APRON5140, DVD-170018 and Tools Booklet 172008
PART NO. 5480-1220
Dry Tile Bullnose Kit
“Create A Factory Finish
Without the Mess”
Kit Includes: WPD-120 Wet/Dry Polisher, VDR505H, GP55/8RG, CD50060R,
CD50200R, CD50500R, CD51000R,
CD52000R, CD53000R and DVD-170021
PART NO. ECOWKIT
Ecoguard Type W Kit
“Perfect for Tuckpointing”
Kit Includes: Ecoguard Type W Dust
Collection Cover and 18” Flexible Connector Hose (500026)
“Complete Floor Polishing System”
Kit Includes: Ecogrinder (ECG-125), Caddy for
Ecogrinder (ECOCAD125) and Dust Bag Carriage
(ECOCAR)
PART NO. 5480-3100
Dry Porcelain Tile Cutting Kit
“Dynamic-Duo for Tile Contractors”
HSG-125 5” High-Speed Angle Grinder,
and 4” Katana Blade (DPT100)
PART NO. ECOGKIT
Ecoguard Type G Kit
“A Dust-free Grinding Solution”
Kit Includes: Ecoguard Type G Dust
Collection Cover and 18” Flexible
Connector Hose (500026)
PART NO. WBCKIT
Wet Blade Cutting Kit
“Turns a Dry Grinder into a Wet Cutting Tool”
Kit Includes: Safety Guard, Water Hose
and Connectors, and a Ground Fault
Circuit Interrupter
PART NO. ECOM50KIT
Ecoguard Type M Kit
“Control Sparks”
Kit Includes: Ecoguard Type M a.k.a.
Spark Buster Collection Cover and a
5” Carbite Blade (TCT5030)
Index
A
G
Accessories
Dust Bag Carriage 23
AIR-300 20
AIR-658 21
Apron 30
AWP-158 19
Grinding Wheels
Vexcel 11
Spike 12
Vextra 13
Vflex 14
Groove Cutter 6
B
Backer Pads
Flexible 22
GV 22
Rigid 22
H
HSG-125 16
P
C
Ceramica
Dry 33
Edge 34
EX 35
Profiler
B-Series 7
R
RSR-2000 38
D
Diamond Hand Pads 37
Drilling
Wet Core Bits 10
Dry Core Bits 10
Dry Tile Bullnose Kit 24
Dust Bag Carriage 23
S
Safety Glasses 30
Sandpaper 36
Stain Removers 38,
U
E
Ecogrinder 15
Segmented Grinding Cup
Wheel 15
Ecoguards
Type C 27
Type G 26
Type M 25
Type W 28
Ultracuts
ABM Series 4
APR Series 2
GPM Series 3
V
VSP-120 18
Catalogs and Booklets
Alpha® has organized its product catalogs to best serve
the needs of our customers. We offer catalogs for
Hand Tooling applications, Concrete appplications and
specialized booklets for fabricating crystallized glass,
thin-panels, pre-fabricated granite blanks and metal
applications. To request these catalogs, or for more
information about our product line, visit our website or
contact us at 800-648-7229.
See our products in action via our FREE Promotional DVDS!
Educational Materials
With the increasing demand for custom fabrication and installation of
kitchen countertops and bathroom vanities, Alpha Professional Tools®
has created an educational product line to include granite countertops,
crystallized glass and pre-fabricated granite blank. These step-by-step
videos guide the viewer through fabrication and installation techniques.
Alpha® Tool Repair Service
•
•
•
•
•
•
Authorized repair centers in the USA and Canada
All tool repairs carry a 30-day warranty
Quick turn-around time
Technical support for repair and maintenance
Order replacement tool parts directly from Alpha®
Loaner program available
Eastern USA
Western USA
Alpha Professional Tools
103 Bauer Drive
Oakland, New Jersey 07436
Phone #: (800) 648-7229 ext. 240
E-mail: tooldesk@alpha-tools.com
Eastern Canada
A1 Industrial & eReplacementParts.com
7036 South High Tech Drive
Midvale, UT 84047
Phone #: (866) 802-6383
E-mail: dale@ereplacementparts.com
Western Canada
The Tool Doctor - Toronto
70 Milner Ave., Unit 2
Scarborough, ON M1S 3P8
Phone #: (416) 292-2290
E-mail: info.toronto@tooldoctor.ca
Tool Care Plus
333-1A Street NE
High River, AB T1V 1L9
Phone #: (403) 777-9920
Contact: Dan Telfer
E-mail: toolcareplus@hotmail.com
The Tool Doctor - Kitchener
30 Manitou Dr., Unit 1
Kitchener, ON N2C 1L3
Phone #: (519) 748-4780
E-mail: info.kitchener@tooldoctor.ca
103 Bauer Drive • Oakland, NJ 07436
800-648-7229 • Fax: 800-286-0114
www.alpha-tools.com
Ver. 4 - 01/14
Copyright © 2014 Alpha Professional Tools. All rights reserved.
Download PDF