Mini Twister Sport | Mini Single Rotor Helicopter with 2.4GHz Transmitter | Specifications | Mini Twister Sport Mini Single Rotor Helicopter with 2.4GHz Transmitter Specifications

F utaba
ter
T ransmit
.
..
y
d
Rea
...in here!
of
Hundreds
w
e
N
g
Excitin
s
t
c
Produ
Inside!
Futaba 6J
(Page 58)
Futaba 18MZ
Futaba 8J
(Page 60)
(Page 59)
It’s another exciting
year for Ripmax... the launch of FTR - Futaba Transmitter Ready - is the
beginning of something very special! Ripmax are introducing an ever-expanding
range of models that have a Futaba S-FHSS 2.4GHz compatible receiver in
them - with genuine Futaba code inside - that can be operated with their own
transmitter, or a Futaba S-FHSS transmitter such as the 6J, the new 8J, the
phenominal 18MZ and all future Futaba S-FHSS radios. If you have an older FF7,
8 or 9 or 10C, you can use them too. Just fit a FTM/TH module (see page 65) and
you’re ready to enjoy FTR - Futaba Transmitter Ready!
www.ripmax.com
Futaba FTM/TH
S-FHSS Module
(Page 65)
CONTENTS
Aircraft..................................................... 1~28
Helicopters..................................... 8 & 29~33
Simulators...................................................... 9
Boats...................................................... 37~43
Cars........................................................ 44~47
Blade Balancers........................................... 48
Engines.................................................. 49~52
Motors.......................................................... 53
Batteries & Chargers............................. 54~59
New Power Servos....................................... 59
Futaba Radio & Accessories................. 60~65
Rolson Tools................................................. 66
Deluxe Materials.......................................... 67
Flying Legends Hawker Hunter................... 68
NOTE: Unless clearly identified as ‘Included’ in the specifications or text, all models are supplied without radio
and power system (i.c. engine or motor) and require further items to complete. We may offer recommendations
as to suitable motors, engines and radios for the models we are featuring but these are not included.
Most of the models shown are supplied Almost Ready to Fly or operate and only require final assembly.
For further information see www.ripmax.com
E&OE. Whilst every effort has been made to guarantee the accuracy of this publication, it is inevitable that
some errors may occur during its production. Ripmax Ltd can accept no responsibility for losses or damages
caused. Prices shown are intended as a guide only. Please check with your local dealer for current prices.
NEW ITEMS 2012
www.ripmax.com
ASH 31 Mi RTF 27MHz
Just when you thought you’d seen everything... along comes
these stunning Axion micro gliders! Moulded from tough,
lightweight foam and powered by a tiny pusher motor, they
charge from their included 2 channel 27MHz transmitters
and come completely ready to fly. Due to their tiny size, the
included radio features nice and simple, non proportional
rudder and throttle control.
• Scale Painted Colour Scheme
• Coreless Motor
• Built in Li-Po Battery
• 12 Minute Flight Times
• Carbon Fibre Re-Inforced Wing
• 2 Channel Radio Included
• Charger Built-In to the Transmitter
• Desktop Display Stand Included
Wingspan: 630mm
Length: 250mm
Weight: 21.5g
A-AX-00100
ASH 31 Mi RTF 27MHz................................... £39.99
or
Per fec t f
mer
Calm Sum
!
Evenings
Discus-2T RTF
27MHz
Wingspan: 550mm
Length: 250mm
Weight: 21.5g
27MHz
Micro
G liders!
A-AX-00102
Discus-2T RTF 27MHz................................... £39.99
ASK 21 RTF 27MHz
Wingspan: 500mm
Length: 250mm
Weight: 21.5g
A-AX-00103
ASK 21 RTF 27MHz........................................ £39.99
Ventus-2CXT RTF
27MHz
p
Deskto
Display
Stand
d!
Include
Wingspan: 640mm
Length: 250mm
Weight: 22g
A-AX-00101
Distributed to all good model shops by:
Ventus-2CXT RTF 27MHz.............................. £39.99
See the full Ripmax range at www.ripmax.com
1
NEW ITEMS 2012
www.ripmax.com
Ventus 2CXT RTF 2.4gHz Mode 2
Similar to the Micro Series gliders this Ventus 2CXT has
2 additional features. For ease of use the canopy
flips up and you can replace the battery so you
don’t have to wait between charges (using its
dedicated charger).
It’s also supplied on
2.4GHz and comes
Wingspan: 640mm
complete with the Axion
Length: 250mm
AX-4 SR FHSS transmitter
Weight: 25g
for the perfect link
between you and
model.
adio
2.4GHz R
e
Includ d !
A-AX-00115-M2 Ventus 2CXT RTF 2.4GHz Mode 2........... £59.99
Airhopper RTF 2.4gHz Mode 2
Perfect for the newcomer, the Airhopper offers incredible
value for money and great flying characteristics. Topped
off with robust tricycle undercarriage and striking colour
scheme, who can resist?
Airhopper is supplied with the AX-4SR 2.4GHz transmitter
which also has a built in charger to charge the model’s flight
battery.
• Perfect for newcomers
• Completely assembled and flight-ready Wingspan: 415mm
• Made in lightweight ‘Styrotech’ foam
Length: 280mm
• High-end 2.4GHz FHSS technology
Weight: 28g
• Efficient geared motor
A-AX-0110-M2 Airhopper RTF 2.4GHz Mode 2................. £59.99
TL-3000 Sirius
See it flying on YouTube:
www.youtube.com/ripmaxltd
Don’t be put off by its tiny, 445mm
wingspan... this is a BIG performer! Highly
manoeuvrable and bags of fun, it comes
complete with high quality 2.4GHz radio,
1S 350mAh Li-Po and USB quick charger.
Its lightweight foam airframe needs just 5
minutes of simple assembly, then charge
and fly. Simple as that!
• Assembles in Under Five Minutes!
• Moulded in Strong, Lightweight Foam
Wingspan: 445mm
• High Quality AX-4CT 2.4GHz Transmitter Length: 340mm
Included with the RTF Version
Weight: 68g
• 1S Li-Po and USB Charger Included
A-AX-00120-01M2 TL-3000 Sirius RTF 2.4GHz Mode 2.... £89.99
2
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
I-15 PolikarpoV
Modelled on the formidable 1930s
Soviet fighter, Axion RC have
produced a real gem of an aircraft
with amazing flying characteristics.
Sporting a colour scheme of that of
the Spanish Republican Air Force, it is
available complete ready to fly with high
quality 2.4GHz radio, Li-Po and USB charger
or in ‘Link and Fly’ format without transmitter if
you already own an AX-4CT.
• Can be Assembled in Under 5 Minutes!
• Lightweight, Moulded Construction
• Factory Fitted Motor, Servos and Receiver/ESC
• Supplied with 1S 350mAh Li-Po and USB charger
A-AX-00125-01M2
A-AX-00125-02
I-15 Polikarpov RTF 2.4GHz Mode 2.... £89.99
I-15 Polikarpov 2.4GHz Link & Fly....... £49.99
AT-6 Texan RTF
delled
Rarely Mo
Subjec t !
Wingspan: 480mm
Length: 365mm
Weight: 75g
The Texan A-T6 is an American
designed training aircraft which
first saw use during World War II.
Accurately replicated in foam by Axion with a
distinctive Orange colour scheme and supplied
ready to fly with 2.4GHz RC or as ‘Link and Fly’ format
without transmitter if you already own an AX-4CT.
A delight to fly, the A-T6 comes complete with
350mAh Li-Po and factory installed 2 in 1 receiver and
ESC unit, two 2g nano servos and powerful coreless motor. The
included charger operates from any USB outlet and once charged,
the Li-Po can be installed in its bay without removing the wing.
A-AX-00130-01M2
A-AX-00130-02
Wingspan: 500mm
Length: 365mm
Weight: 78g
AT-6 Texan RTF 2.4GHz Mode 2....................£89.99
AT-6 Texan 2.4GHz Link & Fly.......................£49.99
Distributed to all good model shops by:
• Assembles in Under 5 Minutes!
• Lightweight, Moulded Construction
• Factory Fitted Motor, Servos and
Receiver/ESC
• Supplied with 1S 350mAh Li-Po
and USB charger
ic U.S.
T he C lass
Aircraft
T raining
of W WII
See the full Ripmax range at www.ripmax.com
3
NEW ITEMS 2012
www.ripmax.com
Spitfire Mk24 2.4GHz
•
•
•
•
•
Full Range, High
Quality Transmitter with
Digital Trims
Servo Reverse on
all Channels
Precision Gimbals
Dual Rates
V-Mix
Accurately moulded in Styrotech foam, the latest Axion
scale aircraft is this terrific Mk24 Spitfire. With an exciting
performance and surprisingly accurate outline, the Spitfire
will delight the experienced pilot. Supplied ready to fly with
2.4GHz RC or in ‘Link and Fly’ format without transmitter if
you already own an AX-4CT. The model comes complete
with 350mAh Li-Po and factory installed 2 in 1 receiver
and ESC unit, two 2g nano servos and powerful coreless
motor. The included charger operates from any USB outlet
and once charged, the Li-Po is installed via the removable
canopy hatch so there’s no need to remove the wing.
A-AX-00135-01M2 Spitfire RTF 2.4GHz Mode 2........................ £99.99
Messerschmitt Bf-109
•
•
•
•
•
Full Range, High
Quality Transmitter with
Digital Trims
Servo Reverse on
all Channels
Precision Gimbals
Dual Rates
V-Mix
What better model to dogfight with the Spitfire than its
adversary, the formidable Bf-109? Supplied ready to fly with
2.4GHz RC or in ‘Link and Fly’ format without transmitter if
you already own an AX-4CT. The model comes complete
with 350mAh Li-Po and factory installed 2 in 1 receiver
and ESC unit, two 2g nano servos and powerful coreless
motor. The included charger operates from any USB
outlet and once charged, the Li-Po can be installed into its
compartment via a removable hatch on the underside so
A-AX-00140-01M2 Messerschmitt Bf-109 RTF 2.4GHz M2....... £99.99
you don’t have to remove the wing.
4
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
Skywalker - BrushED
•
•
•
•
•
Full Range, High Quality
Transmitter with Digital Trims
Servo Reverse on
all Channels
Precision Gimbals
Dual Rates
V-Mix
With a wingspan of nearly a metre, the Skywalker is an impressive
model in the air! Perfect for the newcomer, the Skywalker makes
Wingspan: 900mm (35.4”)
Motor,
a great trainer as it is so stable a flyer and has a wide-track
Length: 770mm (30.3”)
d
tricycle undercarriage for effortless ground handling. Supplied
ESC an
Motor:
370 Class (Included)
complete with a geared 370 class brushed motor, ESC (Electronic Ser vos
ESC:
18A Brushed (Included)
Speed Controller), 8.4v Ni-MH battery, mains charger and three
all
e
r
a
Radio:
3 Channel
9g servos. Available in two formats - RTF (Ready to Fly) and
d ! Servos: 3 x 9g (Included)
Plug and Fly. The RTF version comes complete with high quality Inc lude
Ni-MH:
8.4v 800mAh (Included with RTF version)
2.4GHz FHSS transmitter and receiver, 7 cell Ni-MH battery and
charger.
• Almost Ready to Fly - requires simple final assembly.
The Plug & Fly version requires your choice of transmitter and
• Moulded from lightweight, factory-finished Flexpor.
receiver, plus battery & charger.
• Supplied complete with powerful brushed motor, ESC
A-AX-00200-01M2 Skywalker RTF 2.4GHz Brushed M2..........£114.99
and servos factory fitted.
A-AX-00200-03
Skywalker Plug & Fly Brushed.................... £64.99
• RTF version supplied complete with 2.4GHz radio.
Skywalker
- BrushLESS
Wingspan: 900mm (35.4”)
Length: 770mm (30.3”)
Motor:
370 Class (Included)
ESC:
18A Brushed (Included)
Radio:
3 Channel
Servos: 3 x 9g (Included)
Li-Po:
2S 1300mAh (included with RTF version)
Just like the brushed
version, the brushless
Skywalker features a tough,
lightweight Flexpor airframe.
It also comes complete with a
powerful brushless
motor and matching
ESC, plus - in addition
to rudder, elevator and
motor control - it features
ailerons for even greater
manoeuvrability and control.
Power ful
s
Br ushles
!
Motor
Available in RTF format
complete with high quality 2.4GHz
FHSS transmitter and receiver,
2S 1300mAh Li-Po battery and
charger or as a Plug & Fly which
requires your choice of transmitter
and receiver, plus battery & charger.
A-AX-00205-01M2
A-AX-00205-03
Skywalker-BL RTF 2.4GHz B'less M2....... £149.99
Skywalker-BL Plug & Fly Brushless........... £84.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
5
NEW ITEMS 2012
www.ripmax.com
Alpha 139 2X - Brushed
•
•
•
•
•
Full Range, High Quality Transmitter
with Digital Trims
Wingspan: 1390mm (54.7”)
Servo Reverse on all Channels
Length: 900mm (35.43”)
Precision Gimbals
Motor:
400 Class (Included)
Dual Rates
ESC:
18A Brushed (Included)
V-Mix
With its distinctive appearance
and rear facing motor, the
Alpha 139 is perfect for
novice/intermediate flying.
Featuring a brushed motor and
with rudder, elevator and throttle control, newcomers won’t get
into trouble too quick, yet more experienced pilots will still be able
to enjoy the fun sprightly performance.
Moulded from tough, lightweight Flexpor foam, the Alpha 139 is
available in two formats - RTF (Ready to Fly) and Plug and Fly.
Both come complete with motor, ESC (Electronic Speed Controller)
and servos. The RTF version comes complete with high quality
2.4GHz FHSS transmitter and receiver, 2S Li-Po battery and
charger.
A-AX-00210-01M2
A-AX-00210-03
Alpha 139 2X RTF 2.4GHz Brushed M2.... £139.99
Alpha 139 2X Plug & Fly Brushed............... £79.99
Radio:
Servos:
Li-Po:
3 Channel
2 x 16g (Included)
2S 1300mAh (included with RTF version)
The Plug and Fly
version requires your choice of transmitter and receiver,
plus battery and charger.
• Almost Ready to Fly - requires only simple final
assembly.
• Moulded from lightweight, factory-finished Flexpor
material.
• Supplied complete with powerful brushed motor, ESC
and servos factory fitted.
• RTF version supplied complete with 2.4GHz radio, Li-Po
battery and charger.
Alpha 139 3X - BrushLESS
Just like the 2X brushed version above, the 3X brushless Alpha
139 features a tough, lightweight Flexpor airframe. However, it also
comes complete with powerful brushless motor and matching ESC,
plus - in addition to rudder, elevator and motor control - the 3X also
features ailerons for even greater manoeuvrability.
Perfect as an advanced trainer or ideal for sport pilots that are
looking for an attractive aerobatic model that’s also capable of
operating out of a small field.
A-AX-00215-01M2
A-AX-00215-03
6
Alpha 139 3X Brushless RTF 2.4GHz M2..£174.99
Alpha 139 3X Brushless Plug & Fly.......... £102.99
Distributed to all good model shops by:
Power ful
s
Br ushles
d
n
a
Motor
18A ESC
Included !
Wingspan: 1390mm (54.7”)
Length: 900mm (35.43”)
Motor:
Brushless Inrunner (Included)
ESC:
18A Brushless (Included)
Radio:
4 Channel
Servos: 4 x 16g (Included)
2S 1300mAh (included Li-Po:
with RTF version)
As with the 2X, the 3X Alpha 139 comes in RTF format
with factory installed Axion 2.4GHz FHSS radio, 2S
1300mAh Li-Po and charger. The Plug and Fly version
requires your choice of transmitter and receiver, plus
battery and charger.
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
CUMULUS 200 2X
•
•
•
•
•
Full Range, High Quality Transmitter
with Digital Trims
Servo Reverse on all Channels
Precision Gimbals
Wingspan: 2000mm (78.8”)
Dual Rates
Length: 750mm (29.5”)
V-Mix
Motor:
ESC:
Radio:
Servos:
Li-Po:
370 Class (Included)
Brushed (Included)
3 Channel
2 x 9g (Included)
2S 1300mAh (included with RTF version)
A high performance, lightweight electric
powered soarer with a tough ‘Flexpor’
airframe supplied complete with a
brushed motor, ESC and servos factory
fitted. With rudder, elevator and throttle
control, it makes an ideal first soarer and
can be flown with or without the electric
power pod. Available in RTF format
with high quality 2.4GHZ transmitter
and receiver, plus 2S 1300mAh Li-Po
and balance charger or as a plug and
fly model requiring your own transmitter, A-AX-00220-01M2 Cumulus 200 2X RTF 2.4GHz Brush M2...............£129.99
A-AX-00220-03
Cumulus 200 2X Plug & Fly Brushed......................£74.99
receiver, battery and charger.
CUMULUS 200 3X
If you want even more power and
manoeuvrability, the new Cumulus
3X is just what you’re after. With
its additional aileron control and
high performance brushless motor,
it’s perfect for flying from almost
any field. Like the 2X above, the
power pod can be quickly removed
for thermal or slope soaring.
Available in RTF format with high
quality 2.4GHZ transmitter and
receiver, plus 2S 1300mAh Li-Po
and balance charger or as a plug
and fly model requiring your own
transmitter, receiver, battery
and charger.
Power ful
s
Br ushles
d
n
a
Motor
18A ESC
Included !
Wingspan: 2000mm (78.8”)
Length: 750mm (29.5”)
Motor:
Brushless (Included)
ESC:
18A Brushless (Included)
Radio:
4 Channel
Servos: 4 x 9g (Included)
2S 1300mAh (included Li-Po:
with RTF version)
A-AX-00225-01M2
A-AX-00225-03
Distributed to all good model shops by:
Cumulus 200 3X BL RTF 2.4GHz Brushless M2. £169.99
Cumulus 200 3X BL Plug & Fly Brushless.......... £102.99
See the full Ripmax range at www.ripmax.com
7
NEW ITEMS 2012
www.ripmax.com
F ly
Ready to
ted !
Re-Inven
Just visit om
ax.c
www.r ipm re
o
for m
ion !
Infor mat
with the
le
b
i
t
a
p
m
Co
of Axion
e
g
n
a
r
le
o
Wh
ft too!
RC aircra
!
ors or Out
o
d
n
I
t
i
ly
F
EXCELL 200 RTF 2.4gHz
Axion RC have taken the single rotor micro
helicopter to a new level!
100% factory assembled and supplied complete
with 1S Li-Po, USB charger, spare blades, spare tail and fin with full-size,
high quality 2.4GHz AX-4CT FHSS transmitter.
Incredibly durable and lightweight, it is rock-steady in the hover so ideal for
the newcomer or perfect follow-on from a co-axial model. However, experts
won’t find the Excell 200 lacking as the model has a fair turn of speed with
plenty of control authority.
The onboard 4-in-1 unit features receiver, servos and heading-hold gyro
for minimum fuss and maximum control. Just pop some AA batteries in the
transmitter and you have everything you need to fly!
A-AX-01000-01M2
A-AX-01000-02
Palm
Size!
8
Excell 200 RTF 2.4GHz............................................. £69.99
Excell 200 2.4GHz Link&Fly..................................... £44.99
• Full Range, High Quality
Transmitter with Digital Trims
• Precision Gimbals
• Servo Reverse on all Channels
• Dual Rates
• V-Mix
Everything you need to fly!
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
Reset/Rewind
Button
Included on
the TX!
RealFlight 6 is now loaded with even
more realism throughout, with
vastly improved helicopter
and aeroplane physics!
Expert pilots worked
with RealFlight
engineers to
program increased
precision and
incredible helicopter
performance. These experts made sure the RealFlight 6
reacts exactly like real life - so that feel and response is
as real as it can possibly get.
Would you like to practice manoeuvres, or recreate the
same aerobatics over and over again? Want to find out
why you clipped that pylon, or why you couldn’t pull out
of that dive? Just hold down the Reset Button to stop
your current flight, go back to any previous point in the
flight, and start flying again from there. A “seek” function
lets you precisely pause the action so you can analyse
what went wrong and work on correcting it - as many
times as you want. Along with all of the physics upgrades,
RealFlight 6 has many other new features, including
Heli Safety Alerts, Wingtip and Rotary Trails, Smoke
Reaction, Quicker Loading and Editing, and much more.
Purchase Realflight 6 to experience the most realistic
flight simulator ever!
A quality, full-functioning transmitter
is included in the box; designed after
Futaba’s 6EX and complete with digital
trims and rewind button!
Free Mega Pack!
Aircraft Mega Pack
The 36 extra aircraft are:
BooRay Racer, Eclipse Biplane, ElectriFly FlatOuts Flatana,
ElectriFly FlatOuts Matt Chapman CAP 580, ElectriFly FlatOuts
Reflection, ElectriFly FlatOuts Turmoil, ElectriFly Fokker
DVII, ElectriFly F6F Hellcat, ElectriFly Fun Force P51
Mustang, ElectriFly Fun Force Zero, ElectriFly Mini
Delta, ElectriFly Reactor 3D, ElectriFly Riot 3D,
ElectriFly SE5a, ElectriFly XPD-8, ElectriFly Yak55, F5D Pylon Racer, Great Planes Little Toni,
Great Planes P-6E Hawk, Great Planes PT-17
Military Stearman, Great Planes 1/3 Scale
Matt Chapman CAP 580, Great Planes
U-Can-Do 3D, Great Planes Venus II,
Grumman X-29, Hotliner, KE Flat
The 47 extra helicopters are:
Foamy, KEtana (EP), KEtana
Augusta A109, Align T-Rex 500, Avant Aurora, Aurora 3D, Bergen Intrepid
(Glow), Lawnmower, ModelAero
90, Bergen Intrepid Gasser EB, Boeing AH-64 Apache, Boeing CH-46
AeroCat E-Jet, Nieuport 28CSea Knight Micro, Youngblood Rave ENV 90, Youngblood Rave ENV
1, Pietenpol Air Camper,
700, Curtis Youngblood Rave 450, Dolphin, Dolphin 3D, Finch, Gaui
Top Flite Beechcraft
X5-FES, Heli-Max Axe CX Micro, Heli-Max Kinetic 50, Heli-Max Kinetic
Staggerwing, Top
50 (Trainer), Heli-Max MX400, Heli-Max MX450 XS, Heli-Max Novus
Flite Piper Arrow II,
CP Nano, Heli-Max Novus 125 CP, Heli-Max Novus 125 FP, Hind Mi-24,
TravelAir Mystery
Impala, Impala (Trainer), KDE Direct 700, Miniature Aircraft Fury Extreme,
Ship, Ultrafly
Miniature Aircraft Ion-X, Miniature Aircraft Stratus 90, RAH-66 Comanche,
Aero
£149.99
Models
RJX Hobby X-treme 90, Robinson R22, Skyartec Wasp 200XE V4, Spritzer
Radix-3D.
Aero
£149.99
(4-stroke), Sun Dog (Sport), Synergy N5, Synergy N5C, Synergy N9,
Or
Heli Mega Pack
A-GPMZ4475
A-GPMZ4476
A-GPMZ4477
A-GPMZ4478
Realflight G6 Simluator M2
Realflight G6 Simulator M1
Realflight G6 Simulator M2 Heli
Realflight G6 Simulator M1 Heli
Distributed to all good model shops by:
£149.99
£149.99
Thunder Tiger Mini Titan, Thunder Tiger Raptor G4 E720, Thunder Tiger
Raptor 90 G4, Thunder Tiger Raptor 90SE, Thunder Tiger X50, Thunder
Tiger X50T (Torque-tube), Watt Not.
See the full Ripmax range at www.ripmax.com
9
NEW ITEMS 2012
www.ripmax.com
Black Horse Edge 540V3 30cc ARTF
Capable of regular aerobatics and fast rolling
manoeuvres just like the real one, the 540V3 has a
sleek and complex scale cowling that can hide most of
the engine and silencer to really help keep the flowing
lines of the full size. The nose is finished off with a tough
nylon spinner mounted on an aluminium backplate.
This
version of the Edge
540V3 has been
designed to use
the popular 30cc
petrol engines yet still offer the levels of performance that
you would expect. The sleek balsa/ply construction has been
optimised to give the right combination of strength and low
weight from a practical size of model that is equally at home
on club patch or a show flight line.
If you are looking for an attractive sports aerobatic model
that is cheap to run and really looks the part, then the
Black Horse Edge 540V3 30cc could be the one for you.
Wingspan: 2080mm (81.9”)
Length: 1680mm (66.1”)
Engine: 30cc Petrol
Radio:
6 Channel
Servos: 6
A-BH094
Black Horse Edge 540V3 30cc ARTF.........£379.99
Black Horse Edge 540V3 EP ARTF
Sharing the same design as the larger engine powered versions, the smaller EP
version of the Edge 540V3 is perfect for smaller flying fields and KMS 2820/05
or similar brushless power. With this kind of power, this is a seriously quick
model that ensures that you are on your toes! She covers the
sky fast and demands total concentration.
A-BH095
Black Horse Edge 540V3 EP ARTF.........£139.99
The smallest derivative of the Su-26M still draws on the huge
experience Black Horse has in designing lightweight models
for electric power. The smooth nature of electric motors
means that weight can be saved in front bulkheads whilst
designing in a mount for the battery.
Access to the battery for changing is
easy thanks to the easy-to-remove
top hatch.
By fitting the recommended motor,
you can really turn on the
performance and heads
at the same time. The
Su-26 is just one of those timeless
models that puts exciting flight into
a practical size model for
operation from some fairly
small fields. The low wing loading resulting from the CAD
design is a key factor in achieving this. She has a more than
a fair turn of speed as well.
A-BH097
10
Wingspan: 1160mm (45.7”)
Length: 950mm (37.4”)
Motor:
KMS 2820/05
ESC
35A
Radio:
4 Channel
Servos: 4 Mini
Factory
assembled
from laser cut balsa and ply parts, this Edge is
amazingly light. That translates into superb flying
manners with no nasty surprises. With a durable
Oracover film finish, its impressive scheme is sure to
really turn heads at the field.
Black Horse Su26M EP ARTF
Wingspan: 1140mm (44.9”)
Length: 1063mm (41.9”)
Motor:
KMS 2820/05
ESC
35A
Radio:
4 Channel
Black Horse Su26M EP ARTF.......................£149.99 Servos: 4 Mini
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
Black Horse Su-26M 35cc ARTF
This mid size version of the Su-26 is designed to
have a wide appeal to many modellers. It has been
designed to be practical in size, easy to transport
and be able to utilise the popular 33-36cc petrol
engines on the market today. It’s an ideal choice for
the O.S. GT-33.
Like all the latest Black Horse models, and especially
the other Su-26 derivatives, this version is jig assembled
by skilled workers in the Black Horse factory using
special jigs. When assembled, an equal amount of
skill is used to apply the stunning colour scheme
in durable Oracover film. Oracover is widely
regarded as the best heat shrink film on the
market and a therefore a natural choice for
Black Horse.
Yet again, that big GRP cowl will
completely hide most of the engine
and silencer, leaving the scale outline
undisturbed and reducing the sound a little.
Removing the wings to transport her makes the combination of
size and practicality almost unbeatable. Even a pilot with some
limited low wing experience could master this one pretty quick.
A-BH098 y Bui lt
r
o
t
c
a
F
vered !
and Co
Wingspan: 1730mm (68.1”)
Length: 1620mm (63.8”)
Engine: 30cc Petrol
Radio:
6 Channel
Servos: 6
Black Horse Su-26M 35cc ARTF.......................... £339.99
Black Horse Su26M 55cc ARTF
This is the biggest version of the Su-26 in the Black horse range
and you get a lot of model for your money. The main construction
is from laser-cut balsa and ply parts. Each has been optimised to
give the correct combination of strength an low weight. Black Horse
engineers use the very latest CAD techniques to do this combined
with clever jigs and some unique wood shaping methods. The net
result is a strong model that has predictable flight performance and
exceptional agility. Pretty much like the full size!!
That huge cowling is exquisitely moulded in GRP using epoxy resin
to have great durability without the need for huge weight from inferior
moulding techniques. Just look at how scale all
the scale features are there. Most engines and
silencers are fully swallowed inside to keep the
outside looking just like a scale model should.
5cc
Huge 5 l !
Mode
Wingspan: 2240mm (88.2”)
Length: 1950mm (76.8”)
Engine: 50~55cc Petrol
Radio:
8 Channel
Servos: 8 x 7Kg Minimum
The undercarriage
features heavy
duty aluminium legs
mounted onto large ply
plates that are bonded into the
main structure.
The wings come off for easy transportation but the fuselage is
still a pretty bulky item, so you will need a reasonable estate
car to move the Su26M 55cc about.
Distributed to all good model shops by:
Bolt on a powerful 50-55cc engine like the OS GT-55 and you
can explore that performance envelope to the limit.
A-BH096
Black Horse Su26M 55cc ARTF................. £ 479.99
See the full Ripmax range at www.ripmax.com
11
NEW ITEMS 2012
www.ripmax.com
Black Horse Fiesler Storch ARTF
Just when you thought that Black Horse had done
everything, they come up with a model that is both
iconic and complex all at the same time.
Wingspan: 2850mm (112.0”)
Length: 1910mm (75.0”)
Engine: 28~35cc Petrol
Radio:
5~6 Channel
Servos: 6 x 6Kg and
1 x 3Kg Servo
Weight: 8.1Kg (17.8lbs)
The Storch is all about slow speed flight and STOL performance. It all comes
courtesy of that complex high lift wing featuring both slats and flaps. The Black
Horse version has fixed slats and real ‘Fowler flaps. The flaps and ailerons even
have details such as simulated mass balances out on ‘stalks’, just like the real
one. When down, the slow speed performance has to be seen to be believed!
Not only is it slow, it is predictable and controllable as well. The scale-like struts
look good and are fully structural too.
The fuselage has a realistic canopy and cockpit area. To do this,
Black Horse have used a complex metal rod internal structure and
brazed it together. It is very strong and part of the overall design of
the model. There has been no compromise on scale appearance
to make it easier to manufacture. Exactly what you would expect
from Black Horse!
Then there is the undercarriage. A true and functioning
representation of one of the key design features in a Storch. It is
both complex and simple at the same time with working oleos.
All you need is a 28-33cc petrol engine for her to waft into the
air. That’s when that stunning scale colour scheme is so readily
apparent. Performance is sedate (as you would expect) but the fun
of STOL performance is very addictive.
The Black Horse Storch has a big presence and will be the envy of
your mates!
A-BH099
12
Fiesler Storch ARTF.............................................. £499.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
Black Horse Harmon Rocket ARTF
The
Harmon
Rocket is
basically
a heavily
modified
RV-4. But
modified
hardly does it
justice. The real
Rocket is a homebuilt
aircraft designed to look and fly fast!!
Black Horse have created their version to
be as close to the original as possible but
with minor changes to make it even more
practical as a model. The unique factory
jigging procedure ensures that each and every one is straight and true.
At the end of assembly, the Rocket is skilfully covered in Oracover in a
scheme that is visually appealing and true to the concept.
The Black Horse Harmon Rocket needs a 15-20cc 2-stroke engine (petrol
or glow) but could also accommodate a 25-30cc 4-stroke as well. The
choice depends on your performance preference.
Wingspan: 1660mm (65.4”)
Length: 1570mm (62.0”)
Engine: 0.91 Two Stroke, 1.20 Four Stroke or 15cc Petrol
Radio:
6 Channel
Servos: 8 Servos
GRP and vacuum mouldings are used where wood is impractical so the
appearance is maintained and weight is minimised.
A-BH100
Black Horse Harmon Rocket ARTF..................................£319.99
Black Horse Landscape ARTF
• Fully shielded hinges on
all control surfaces & flaps.
• Tough undercarriage is designed to cope
with most club fields.
• Working oleo strut on the front wheel.
• Factory finished in Oracover
polyester film.
Wingspan: 1940mm (76.4”)
Length: 1700mm (66.9”)
Engine: 25~30cc Petrol
Radio:
5~6 Channel
Servos: 6 x 5Kg, 1 x 7Kg and
1 x 3Kg Servos
Based on a
famous modern
light aircraft, the Landscape
has the kind of curves that
are usually the domain of GRP
mouldings. Black Horse on the other hand have a way with
wood that sometimes defies belief. The Landscape is mostly
wood! Yes, there are GRP parts, such as the cowling and wheel
spats, but the majority of the structure is laser cut wood clad in
balsa - even those curved wing tips!
Flying is of course superb, with a wide speed range and no
hidden surprises at slow speeds, even with the flaps down.
A-BH101
Distributed to all good model shops by:
Black Horse Landscape ARTF....................... £359.99
See the full Ripmax range at www.ripmax.com
13
NEW ITEMS 2012
www.ripmax.com
Black Horse Sea Fury FB11 ARTF
One of the very last piston engined fighters
to enter Royal Navy service, the Sea Fury had
the distinction of being the only such aircraft to shoot
down a Mig15 in combat during the Korean conflict.
The Black Horse Sea Fury FB11 is a very faithful model of
this classic fighter. Very little has been compromised from
scale to make sure that those classic lines are not lost. Even
the very complex curves have been replicated using balsa
shaping techniques unique to the Black Horse engineers.
Designed to use the popular 33 - 40cc petrol engines like
the OS GT-33 and the performance with that level of power
is exactly as you would expect...exhilarating! Wide loops,
graceful chandelles and long rolls are a joy to perform.
Control responses are strong yet progressive, thanks to
optimised areas and shielded hinge lines. Black Horse has
reduced hinge gaps to a minimum by using inset, fixed
hinges and pivot rods. Doing it the easy way with plastic
hinges was dismissed in the pursuit of scale detail and flight
performance.
Construction is from laser-cut balsa and ply parts that are jig
assembled and then covered in an authentic, printed vinyl
covering that is durable and damage resistant. There are
even some small pieces of the various colours included to
repair the odd ‘ding’.
The cowling is moulded in GRP to be both light and strong. It
is of course painted in matching colours to the vinyl. Detailed
mouldings are mixture of GRP and ABS according to need.
The cockpit and pilot are cases in point, and you would go a
long way to do better yourself!
The Sea Fury is fully equipped with air retracts as standard,
using totally new, metal-bodied units and sprung oleos.
Wingspan: 1950mm (76.8”)
Length: 1757mm (69.2”)
Engine: 35~40cc Petrol
Radio:
6 ~7Channel
Servos: 8 Servos
• Factory built and covered in pre-printed vinyl.
• Pre-painted GRP cowling.
• Supplied complete with all-new metal-bodied
air retracts and sprung oleos.
• Removable wings and tailplane halves make
transport in smaller cars simple.
o
t
Ver y hard
!
t
is
Res
A-BH102
14
Black Horse Sea Fury FB11 ARTF..................£419.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
Black Horse Zlin 50L ARTF
Wingspan: 2145mm (84.5”)
Length: 1641mm (64.6”)
Engine: 25~30cc Petrol
Radio:
5~6 Channel
Servos: 5 x 5Kg, 1 x 7Kg and
1 x 3Kg Servos
ht
Light weig
l
w
o
GRP C
and
Spats!
The Zlin 50L was one
of the first aircraft to
start off the modern
genre of monoplane
aerobatic aircraft. It was designed from the outset as a
pure aerobatic aircraft and stressed for high ‘G’.
Black horse have created a superb version here with all the
agility of the original in a size that will fly on the popular 25 30cc petrol engines. Where possible, the scale outline has been
used and the only departures have been those required to make a
model fly well and be durable in use at the average club flying field.
Wing sections have been chosen to provide the correct aerobatic
response and stability and flaps have been added to aid the landing
speed, just like the original.
A-BH103
Black Horse Zlin 50L ARTF........................................... £349.99
Black Horse Macchi MC200 ARTF
Try
g
Somethin
!
t
Dif feren
Wingspan: 2000mm (78.7”)
Length: 1500mm (59.1”)
Engine: 30~35cc Petrol
Radio:
6 Channel
Servos: 8 Servos
One of the
most
famous
Italian
fighters of
WWII!
The Black
Horse
version is
a really
convenient
size. Not
too big that
it won’t fit in
a car and not
too small to be
knocked around
in a breeze. The
recommended engine size will not break the bank either!
The complex shape of the fuselage behind the cowl has been
faithfully re-produced by using Black Horse’s complex, wood
moulding techniques to make this Macchi a real scale aircraft.
Add the beautiful, hand made GRP cowling and you can see
exactly how well the design follows the full size.
The entire construction is jig assembled using laser cut parts
by skilled craftsman. No machine assembly here, just old
fashioned skill and care in every model.
Distributed to all good model shops by:
All Metal
c ts
Air Retra
Included !
A-BH104
Black Horse Macchi MC200 ARTF...............£359.99
See the full Ripmax range at www.ripmax.com
15
NEW ITEMS 2012
www.ripmax.com
Air
All Metal
Retrac ts
Included !
Black Horse Wyvern S4 ARTF
Now here’s a model that you don’t
see every day. In fact it’s probably
the first R/C ARTF model of the
Wyvern anywhere in the world!
The Westland Wyvern was one of
the very last, single propeller aircraft
to enter service with the Royal Navy
for strike purposes. She was
big, powerful and packed a
huge punch. Ok, the Black
Horse Wyvern does not
have the contra-rotating
scale propellers, although there
are some big electric systems
on the market that would do the job, so it needs a
powerful 50~55cc petrol engine like the
O.S. GT-55 to do her justice and deliver
performance. The all wood construction is
laser-cut, jig-assembled and then covered in
durable, printed vinyl in a real scale scheme.
It’s a big model, so the wings, tailplanes and fin are designed
to be removable for transport.
A full set of completely new, all-metal, air retracts are
included with sprung oleo legs. Scale inner wheel well doors
are actuated by the wheels as they retract, making a very
clean underside when in flight. The Black Horse Wyvern is a
bold statement of ‘doing something different’ and will certainly
turn a lot of heads on your club patch!!
A-BH105
Wingspan: 2240mm (88.2”)
Length: 2050mm (80.7”)
Engine: 50~55cc Petrol
Radio:
6~7 Channel
Servos: 9 x High Torque and
1 x Standard Servo
Black Horse Wyvern S4 ARTF.................... £499.99
Black Horse Orbit ARTF
or
Per fec t f
n
u day
Relaxed S
F lying!
c tr ic or
F ly it Ele
ur
T wo or Fo
!
Stroke IC
Wingspan: 1780mm (70.1”)
Length: 1320mm (52.0”)
Engine: .46 Two Stroke,
.52 four stroke, or
KMS Quantum 2826/06
Radio:
4~5 Channel
A charismatic, ‘30s’ styled cabin
model for relaxed Sunday flying.
That elliptical wing has all the
charm from a bygone era and
the choice of a cream background
to the colour scheme and the dramatic colours suggest the ‘art deco’
period too. When it comes to construction, the Orbit is bang up-to-date.
The model is CAD designed with components that are laser cut, jig
assembled and covered in modern Oracover heatshrink film.
Power can be chosen from three sources, a .52 4-Stroke, a .46
2-Stroke or a KMS Quantum 2826/06 brushless motor. The facility for
all three is catered for in the kit.
A-BH106
16
Black Horse Orbit ARTF................................................ £139.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
Black Horse Sputnik ARTF
The latest sports
aerobatic model
from Black
Horse is
designed
for use with
either IC or
electric power
from the start
and both
types of power
source are
accommodated in
the kit.
Being laser cut
from selected balsa and ply parts, the
Sputnik is exceptionally light and strong.
That light weight and generous side area
make a fully aerobatic sports model that can
deliver stunning performance in any attitude.
A tough aluminium undercarriage soaks up the
roughness of grass field operation and the forgiving
flight nature ensures that she can be operated from
most club patches.
Add a stunning colour scheme in durable
Oracover and it is easy to see why many club fields
will see the Sputnik during the coming season.
Tough
m
Aluminiu
ge!
ia
r
r
Underca
Stunning
Colour
Scheme!
Wingspan:
1320mm (52.0”)
Length:
1240mm (48.8”)
Engine:
.25~.32 Two Stroke or
Electric Motor: KMS Quantum 2826/05
Radio:
4~5 Channel
Servos:
4~5 Servos
A-BH107
Black Horse Sputnik ARTF...........................£129.99
HAWKER Hurricane ARTF
The Hawker Hurricane is probably the most underrated aircraft of WWII. In the
Battle of Britain, the Hurricane accounted for more German aircraft shot down
than any other, and by some considerable margin. The solid flying performance
and concentrated .303 browning machine guns made her deadly. Pilots loved her
because she would take immense damage and still get home; a true workhorse.
many still survive in flying condition to this day.
Black Horse have developed their version of the Hurricane with
all this heritage very much in mind. Great care has gone into
replicating a faithful shape and adding as many scale details as
possible. The result is a beautiful model that has extremely
forgiving flight performance and
is easy to take off and land.
Much like the original really!!
c ts
Air Retra
d
Include !
Like all Black Horse Models, the detailed CAD design is translated into an airframe
using Laser cut balsa and ply parts and then hand assembled by skilled workers in
the factory. Several key parts like the cowl are moulded in GRP and other details in
vacuum-formed ABS plastic. That ‘stringer’ rear fuselage is there and adds a lot to
the scale realism. Wherever possible, the scale shape has been faithfully followed.
The printed vinyl covering has been colour matched as closely as possible to the
true 1940 colours and the painting of the cowl etc. sprayed in the same manner.
Flaps are standard, as are the full set of aluminium air retracts with sprung oleo
legs that are included.
A-BH108
Wingspan:
Length:
Engine:
Radio:
Servos:
2210mm (87.0”)
1680mm (66.1”)
50~55cc Petrol
7~9 Channel
9 x 6Kg Servos
Hawker Hurricane ARTF.......................................................................£TBA
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
17
NEW ITEMS 2012
www.ripmax.com
Messerschmitt Bf-109E3 ARTF
The most famous German fighter of WWII was
certainly the Messerschmitt Bf-109, and in the
early years of the war the ‘E’ version with it’s
characteristic stubby nose. Like the Spitfire,
the Bf-109 was in production throughout the
war and was extensively developed.
Just a quick look at the shape and the detail will
tell you that Black Horse have pulled out all
the stops on this one. The outline
is a scale as possible and
details like air inlets
and the cockpit/pilot
set this 109 apart from
others on the market.
The Laser cut balsa and ply parts have been lovingly assembled at the factory in
multiple jigs by highly skilled workers.
•Control response is positive yet predictable.
•Wider undercarriage track to reduce the famous ‘109’ tendency
to ground loop.
•Effective scale flaps reduce the
Wingspan:2,200mm (86.61”)
landing speed considerably.
Length: 1976mm (77.8”)
•Working oleo legs absorb the
Weight: 8.3kg (18.5lbs)
bumps of the average flying field.
If ever you have wanted a practical
and scale Bf-109E then Black Horse
have surely delivered.
A-BH109
Radio: 7-9 Channel
Servos: 9 (6kg min) Standard
Engine: 50-55cc Gas
Messerschmitt Bf-109E3 ARTF............................£TBA
Silence Twister ARTF
There is no mistaking where the styling came from for this
one! The full size Silence Twister was designed in Germany
as kit aircraft to offer a cheap light aircraft that has the basic
planform of the most famous fighter of them all, the Spitfire.
The original has retracts yet only a tiny 80Hp engine. The
sleek design is where the performance comes from.
Wingspan:1,870mm (73.62”)
Length: 1,600mm (62.99”)
Weight: 4.6kg (10.12lbs)
Radio: 5-6 Channel
Servos: 7 Standard
Engine: 15cc Gas
Great
F irst
l
Petro !
Model
Black Horse chose to model the Silence
Twister in order to offer a modern styled
aircraft that has both character and
performance, yet is a little different
to most models on the market
today.
The Silence Twister is factory
constructed from Laser cut parts
clad in balsa and then stunningly
finished in durable Oracover film in a scale
scheme. The cowl and spats are moulded
from GRP with other mouldings formed
in ABS before painting. The model has
fixed undercarriage rather than the
retracts of the original making her
practical for club use.
Bolt on a 15cc petrol engine,
install the radio of your choice
and she is ready to go!
A-BH110
18
Black Horse Silence Twister ARTF.........................................................£TBA
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
ter
T ransmit
d
nk an fly
Ready - li
F utaba
with any
adio!
S-FHSS r
Acro Wot Mk2 Foam-E FTR ARTF
F utaba
Wingspan: 1250mm (49.0”)
Length: 1015mm (40.0”)
Motor:
Brushless (Inc.)
Radio:
4~5 Channel
Servos: 4 x 9g Servos (Inc.)
With the phenomenal success of the WOT 4 Foam-e, it was only going
to be a matter of time before the classic Acro WOT was introduced to
the range. And it was worth the wait!
Unmistakably an Acro WOT, the new Foam-e version has been
designed by Chris Foss to make the best of 3 cell 2100~2500mAh
Li-Pos. Supplied with factory fitted servos, powerful brushless motor
and speed controller and available in three exciting versions - as a
model ready for your own transmitter and receiver, or as an almost
ready to fly model with 2.4GHz Futaba compatible receiver. Yes, the
Acro Wot is the first model to launch FTR - Futaba Transmitter Ready.
Compatible with all Futaba S-FHSS 2.4GHz radios, the Acro Wot can
be flown with the Futaba 6J, new 8J and
amazing 18MZ.
If you want everything in the box,
there’s even a ready to fly version
with a transmitter included that’s also
Futaba compatible, so the model can
also be flown with any other Futaba
S-FHSS transmitter!
The FuTuRe of radio control has just
been re-defined. Look out for the
distinctive FTR logo on an ever
expanding range of exciting new
models that are Futaba Transmitter
Ready throughout this catalogue and
at your local model shop soon.
A-CF030
Acro Wot Mk2 Foam-E ARTF.......................£149.99
A-CF030FTR Acro Wot Mk2 Foam-E FTR ARTF...................£TBA
A-CF030RTF Acro Wot Mk2 Foam-E RTF 2.4GHz................£TBA
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
19
NEW ITEMS 2012
www.ripmax.com
Nine Eagles Sky Surfer
Nine Eagles Sky 500 RTF
With its compact size, the Nine Eagles Sky Surfer is
the perfect park flyer. Supplied complete with radio
installed, plus motor, ESC, folding prop and 7.4V
Li-Po, the Sky
Surfer has quick
access to the battery
compartment for
maximum fun and
minimum fuss.
The Sky 500 is the smallest of the Nine Eagles line
of ‘Powered Glider’ RTF trainers. Its convenient
size allows it to be carried fully assembled or
in its box, yet it is more stable than its micro
counterparts outdoors. Everything required to
fly is included and assembly time is minimal.
Simply charge and Fly!
Sky 500 comes
complete with Nine
Eagles’ switchable
mode transmitter
with LCD screen
and digital
trims.
Wingspan:500mm (19.68”)
Length: 355mm (13.97”)
Weight: 40g (1.41oz.)
Radio System: 3 Ch. 2.4GHz (Inc.)
Li-Po: 1S 3.7V 150mAh (Inc.)
Wingspan:780mm (30.7”)
Length: 520mm (20.4”)
Radio System: 3 Channel (Inc.)
Electric Motor: N60 (Inc.)
Li-Po: 2S 7.4V 250mAh (Inc.)
Sky Surfer comes complete with
Nine Eagles’ new J4 Pro transmitter,
which means the model is now FTR
(Futaba Transmitter Ready) and
can also be flown with any Futaba
S-FHSS radio - such as the 6J, new
8J and 18MZ!
A-NE724104001A
Sky 500 RTF......................................£54.99
A-NE781RTF Nine Eagles Sky Surfer RTF S-FHSS.........£84.99
A-NE781FTR Nine Eagles Sky Surfer FTR S-FHSS.........£64.99
ACRO WOT Mk2 ARTF
Ever since the release of the ARTF version of the incredibly popular
WOT 4 the question on everyone’s lips has been “when will there
be an ARTF Acro Wot?”. Well now those questions have been
answered, with the development of this new Acro Wot Mk2 as a
complete ARTF airframe of the highest quality. Produced under
licence and with the approval of the original designer Chris Foss,
the Acro Wot Mk 2 ARTF is sure to become as great a success
as the WOT 4 has been, with its unbeatable combination of great
looks and superb flying performance. Assembled with great care
and attention from best quality balsa and ply, then professionally
covered in high quality film, the Acro Wot also features a moulded
glass fibre cowling as well as
a moulded and tinted canopy.
The painted pilot is pre-fitted,
and the model comes with a
very substantial pre-formed main
undercarriage, which attaches
to a strong and resilient
mounting in the fuselage
fully capable of handling
those occasional less than perfect landings.
The model is supplied complete with fuel
tank, spinner, steerable tailwheel and
all control accessories. Flying
performance is truly excellent,
the Acro Wot being fully
aerobatic, yet remaining
Wingspan: 1505mm (59.25”)
stable and easy
to fly for less
Length: 1200mm (47.25”)
experienced
Engine: .40~.55 2 Stroke
pilots and both take
.70~.80 4 Stroke
off and landings being simple to perform.
Radio:
4~5 Channel
Servos:
20
5 Servos
Distributed to all good model shops by:
A-CF006
Acro WOT Mk2 ARTF....................................£139.99
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
Citabria 3D Foam
ARTF
Based on the light single engined, two
seat aerobat which entered production in
the United States in 1964, this 3D Citabria is
capable of the original’s sparkling performance
and more! Designed for all-out 3D manoeuvres,
it comes with pre-hinged surfaces, stunning high
visibility scheme and laser-cut hardware.
Assembly is quick due to the 3mm polystyrene
Pro-Formance foam parts - even the wings
have the carbon fibre wing spars factory
installed!
• Factory bevelled and pre-hinged control surfaces.
• Designed for 250 class outrunner power.
• Lightweight, 3mm Pro-Formance foam construction.
• Pre-assembled undercarriage with wheels factory installed.
A-GPMA1127
Citabria 3D Foam ARTF............................ £49.99
Wingspan: 840mm (33.0”)
Length: 750mm (29.5”)
Motor:
250 Size Brushless
ESC:
8A Brushless
Radio:
4 Channel
Servos: 3 Micro Servos
Li-Po:
2S 350mAh
Super Stearman EP ARTF
After WWII, the trusted trainer that had taught thousands
of Allied pilots to fly was suddenly obsolete. But for a
lucky handful, fame was just around the corner, as a
showcase for stunt pilots and wing-walkers. The
Super Stearman was a star in every sense of the
word - and this ARTF model offers the original’s
great looks and thrilling performance in full. Perfect for ‘grab
and go’ flying at a nearby park or the flying field. At just 36”
span, it’s easy to carry by hand and easily fitted in the car even when assembled. Best of all, you can have it centre stage
and wowing the crowd just a few hours after you open the box!
• Designed for fast assembly, with a balsa/ply airframe,
MonoKote covering and painted fibreglass parts!
• Built for brushless power and air show-quality aerobatics!
• To simplify assembly, the fin and tail are self-aligning fin and
tail, pre-hinged ailerons plus pre-painted cabanes and struts.
A-GPMA1150
Super Stearman EP ARTF....................... £169.99
for
Designed bly!
m
e
Quick Ass
Wingspan: 915mm (36.0”)
Length: 750mm (29.5”)
35mm 1250Kv Motor:
Brushless Outrunner
ESC:
35A Brushless
Radio:
4 Channel
Servos: 4 Micro Servos
Li-Po:
3S 2200mAh
G-44 Widgeon EP ARTF
When you’re
ready to explore
new sport flying
frontiers, think water and the ElectriFly G-44
Widgeon seaplane. Just
as full-scale Widgeons
carry sportsmen to remote fishing and
hunting grounds, this is the perfect ARTF
model for your next great R/C adventure
- lifting off from and landing on a pond
or lake, and enjoying a smooth, stable
sport flight performance in-between.
• Designed for brushless electric power.
• Taxis easily on water and takes off with authority.
• Supplied with painted fibreglass fuselage.
• Factory-painted and trimmed motor nacelles and floats.
• Built-up, MonoKote factory covered wing and tail.
• Includes decal sheet and assembly/display stand.
Distributed to all good model shops by:
Wingspan: 1295mm (51.0”)
Length: 915mm (36.0”)
2 x 28mm 950Kv
Motor:
Brushless Outrunner
ESC:
2 x 25A Brushless
Radio:
4 Channel
Servos: 4 Micro Servos
Li-Po:
3S 3500mAh
A-GPMA1151
Fac tor y
Painted
s
F ibreglas
!
e
g
la
e
F us
G-44 Widgeon EP ARTF........................ £199.99
See the full Ripmax range at www.ripmax.com
21
NEW ITEMS 2012
YAK55M ARTF
Winner of several world aerobatic championships, the
Yak-55 underwent several design changes in 1989 - most
notably a shorter, more tapered wing - which resulted in the
Yak-55M. Great Planes have captured the unique look of
the Yak-55M in a 50” wingspan model that flies like a much
larger plane. The Yak-55M
executes aerobatic and
pattern manoeuvres with
extraordinary precision.
www.ripmax.com
Wingspan: 1285mm (50.5”)
Length: 1195mm (47.0”)
42mm 800kv
Motor:
Brushless Outrunner
ESC:
45A Brushless
Radio:
4 Channel
Servos: 4-5 Micro Servos
Exciting
Patter n
!
Precision
• Lightweight airframe allows for
exciting aerobatics and pattern
manoeuvres.
• Airframe components are pre-assembled
and covered in MonoKote film, so you can
be at the flight line in just a few hours.
• Two-piece wing speeds assembly and
makes transportation easier.
A-GPMA1186
YAK55M ARTF........................... £189.99
Escapade .61 EP ARTF
With its bolt-together assembly, the Escapade .61 ARTF
is so easy to assemble - and so enjoyable and affordable,
you’ll want to fly it at every chance you get! You have a
variety of options for powering it, and the larger dimensions
add stability and visibility to your sport manoeuvres. With a
.61 two-stroke you have a great second plane for low-wing
aerobatics. Fit a .91 for superb vertical performance, or go
with a brushless outrunner motor for clean, quiet power.
Wingspan: 1725mm (68.0”)
Length: 1485mm (58.5”)
Engine: .61~.95 Two Stroke
.91~1.20 Four Stroke
Radio:
4 Channel
Servos: 4-5 Servos
• Equally suited to glow
or brushless electric.
• Tail surfaces bolt on and align
automatically.
• Control horns are pre-installed & pre-aligned.
• Control surfaces are pre-hinged.
• Two-piece wing simplifies assembly as well
as transportation.
• Fibreglass cowl and spats, plus a painted and
installed pilot figure included.
A-GPMA1201
Escapade .61 EP ARTF.......................... £219.99
Mustang .46-70 ARTF
Combat-ready and easy to
assemble, this 56” span P-51
combines smooth sport flight
with edge-of-your-seat
warbird excitement. Its
two-piece, balsa-sheeted
foam wing has been covered in
MonoKote film, while the detailed cockpit
includes an instrument panel, headrest and
pilot. Performance is first-rate, too - whether
you install glow or brushless electric power! It
goes exactly where you point it and has no bad
habits.
• Smooth flight characteristics.
• Fast and easy to assemble.
• Includes mounting hardware for glow or electric
power.
A-GPMA1205
22
P-51 Mustang .46-70 ARTF................... £199.99
Distributed to all good model shops by:
Wingspan: 1420mm (56.0”)
Length: 1270mm (50.0”)
Engine: .40~.55 Two Stroke
.70 Four Stroke
Radio:
4 Channel
Servos: 4-5 Standard Servos
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
Waco .91-1.20 ARTF
The Great Planes Waco
is a scale model of
the classic Waco YMF-5 first
produced in 1934. The original Waco
had smooth lines, a signature colour
scheme, and a timeless design.
The Great Planes replica offers instantly
recognisable looks and outstanding,
stable performance with either glow
or petrol power. It’s ideal for the flyer
who wants a truly impressive “Golden
Age” model that flies as good as it looks.
• Built-up balsa and plywood airframe
construction covered in MonoKote.
• Includes parts to complete as a two-seat
trainer or single-pilot mail carrier.
• Painted fibreglass spats, struts, cabanes, plus
wing and landing gear fairings.
• Pre-hinged ailerons and elevators simplify assembly.
A-GPMA1295
ing
Outstand e!
c
n
a
Per for m
Waco .91-1.20 ARTF............................... £579.99
Wingspan: 1830mm (72.0”)
Length: 1435mm (56.5”)
Engine: .91 Two Stroke
1.20 Four Stroke
Radio:
4 Channel
Servos: 7 Servos
Shoestring GP/EP ARTF
The full-size Shoestring’s simplicity
made it a favourite with builders...
and its manoeuvrability and speed
appealed to trophy-hunting pilots. Those
same qualities make this model stand
out, offering easy assembly, exciting
aerobatics, and a distinctive look at the
flight line. The lines of the original Shoestring
are captured with lightweight fibreglass parts,
including the cowl, wheel spats and fuselage –
whose corrugations suggest the fabric covering
of the classic Golden Age racer. Wide sport
flying envelope, from gentle to “racer” fast and
responsive.
• Painted fibreglass parts and two piece wing.
• Excels at rolls, snaps, spins and other sport
aerobatics using glow or electric power.
A-GPMA1328
F ly it I.C. !
ic
or Elec tr
Shoestring GP/EP ARTF....................... £239.99
Wingspan: 1370mm (54.0”)
Length: 1195mm (47.0”)
Engine: .46~.55 Two Stroke
.70~.81 Four Stroke
Radio:
4 Channel
Servos: 4~5 Servos
Christen Eagle 46 ARTF
American Frank Christensen designed this aircraft as
an unlimited-class aerobat that pilots could build at
home. It was an immediate hit - and this ARTF promises
to be just as popular. Designed to deliver the same
adrenaline-charged aerobatics as the original, as well
as the amazing assembly ease Great Planes is famous
for!
• Designed for fast-paced aerobatics and easy
assembly.
• Captures the trademark “Eagle” trim scheme in bright
MonoKote colours!
• A great performer with glow
engines or brushless power!
Wingspan: 1080mm (42.5”)
• Innovative inter-plane struts
Length: 1005mm (39.5”)
eliminate brackets and tiny
Engine: .46~.55 Two Stroke
screws, speeding assembly at the .70~.72 Four Stroke
flying field.
Radio:
4 Channel
• Comes with a painted pilot figure
Servos:
7 Servos
already installed.
Distributed to all good model shops by:
A-GPMA1431
Christen Eagle 46 ARTF........................ £339.99
See the full Ripmax range at www.ripmax.com
23
NEW ITEMS 2012
www.ripmax.com
Synchro
EDF ARTF
There’s no other plane like the
Syncro. Purchase one model,
get two ways to fly it; as a 55.5”
span glider or 31.5” span sport
plane. Install your brushless
motor in the high-performance
ducted fan power pod and enjoy
a wide flight envelope — from long,
leisurely soaring to jet-like aerobatics!
Change from glider to sport flight whenever
the mood strikes — the Syncro’s wings can
be exchanged quickly right at the flying site.
The ducted fan pod is held on by powerful
magnets, and removes easily from one wing
for attaching to the other.
Supplied
with T wo
Wing
Options!
• Soaring and sport wings.
• Ducted fan power pod.
• Durable Aerocell foam construction.
• Removable landing gear.
A-GPMA1581
Wingspan: 1410mm (55.5”) - Glider
Wingspan: 800mm (31.5”) - Sport
Length: 875mm (34.5”)
Motor
24mm 4000Kv
Required: Brushless Inrunner
ESC:
25A Required
Radio:
4 Channel
Servos: 6 Micro Servos
Great Planes Synchro EDF ARTF.......... £99.99
Great Planes F-16 F.Falcon ARTF
Praised by pilots for its versatility, the
F-16 Fighting Falcon has been the
preferred fighter for over 25
countries since the late
1970s. ElectriFly recreates
the F-16’s innovative design
in a ducted fan ARF that combines scale looks with
impressive top-end speeds! The F-16 can be hand-launched,
or you can take advantage of the included bungee launch for
even easier launching.
• Includes a HyperFlow ducted fan unit and high performance
Ammo brushless motor.
• The fibreglass fuselage is factory-painted, while the built-up
wings and tailplane are factory-covered in MonoKote film.
• Aileron, elevator and rudder controls result in outstanding
authority for precision landings and high-speed
manoeuvres.
• Includes bungee launcher, profile pilot and display stand.
A-GPMA1801
Great Planes F-16 F.Falcon ARTF........ £249.99
Rifle EP ARTF
s
F ibreglas
ing
W
,
e
g
F usela
and Tail !
Great
Planes brings
speed to the
masses with the
fast, nimble Rifle — an
envelope-pushing addition to
your aircraft options that will definitely
get attention at the flying field. The Rifle’s
fibreglass fuselage, wing and tail are
factory-finished
in a trim scheme
that helps you stay
oriented during flight.
Take a fast, full-throttle
thrill ride...then chill
out, charge up and fly again!
A-GPMA1805
24
Great Planes Rifle EP ARTF................. £137.99
Distributed to all good model shops by:
Wingspan: 570mm (22.5”)
Length:
875mm (34.5”)
Motor:
Ammo Brushless - Included
Ducted Fan: HyperFlow - Included
ESC:
35A Required
Radio:
4 Channel
Servos:
4 Micro Servos
Wingspan:
Length:
Motor:
ESC:
Radio:
Servos:
High
nce
Per for ma
s
s
le
Br ush
an
F
d
n
Motor a
d!
e
d
lu
Unit Inc
785mm (31.0”)
620mm (24.5”)
24mm 3180KV Inrunner Required
25A Required
3 Channel
2 Micro Servos
• “White knuckle”
speed, with predictable
handling and tracking.
• Lightweight, factory-finished composite
construction.
• Compact, fast and easy to assemble.
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
Cosmic Wind EP ARTF
The single engine, single seat Cosmic Wind racing
monoplane was designed in 1947, with Goodyear Trophy
victories in mind. This ElectriFly
model version excels at sport
aerobatics using low-cost brushless power
components. It’s also a great choice for club
racing — or just chasing another Cosmic Wind at any
flying site.
• Versatile sport-scale aerobat — with a racing edge.
• Factory-finished fibreglass and wood structures
assemble quickly.
• Factory-hinged ailerons add to the time-saving ARTF
simplicity.
• Available in red or white, with checkerboard decal sheets
included for custom looks.
or
Per fec t f
t
s
o
C
Low
s
s
le
h
s
Br u
!
r
e
w
Po
A-GPMA1810
A-GPMA1811
Cosmic Wind EP ARTF (Red)...........£149.99
Cosmic Wind EP ARTF(White).........£149.99
Wingspan: 940mm (37.0”)
Length: 760mm (30.0”)
Motor:
1750KV Outrunner
Radio:
4+ Channel
Servos: 3 Micro Servos
Falcon EP ARTF
The
plane that
taught thousands of
modellers to fly. Introduced
in 1962, the Goldberg Falcon
was a mainstay at the flying
field — becoming the plane that
took countless numbers of R/C pilots
from the beginning stages into basic
aerobatics. The Falcon has now been
re-engineered with today’s technology,
including foam construction and brushless
electric power. But the Falcon’s classic profile
and gentle flight characteristics are just like
you remember them... only better.
Wingspan: 915mm (36.0”)
Length: 815mm (32.0”)
Motor:
1250KV Outrunner
Radio:
4 Channel
Servos: 3 Micro Servos
in
• High performance foam
makes the airframe strong and lightweight.
• An agile model - suitable for flying indoors or out.
• Rubber bands make attaching the wing simple
and fast, and allow the wing to pop off in a crash,
preventing excess damage
A-GPMA1940
Falcon EP ARTF....................................... £84.99
Micro Albatros DV RTF 2.4gHz
The Albatros is so compact that you can fly it
almost anywhere — and so impressive that it
will be the centre of attention wherever you
go. Its authentic looks start with the true WWI
trim scheme and colours, but go beyond that
to include a realistic replica engine in the nose
and a pilot figure for the cockpit. Customise the
pilot, charge up the pack, and you’re ready for
long-lasting flights and easy flying.
• 100% complete — ready for takeoff in minutes!
• Takes off from a hand launch or short ROG.
• Smooth, easy 3-channel control.
• Secure 2.4GHz Tactic radio system.
• Flies for up to 10 minutes — charge from the Tx.
A-HCAA2551 FlyZone Micro Albatros DV RTF.........£74.99
Distributed to all good model shops by:
100%
!
Complete
Wingspan: 370mm (14.5”)
Length: 280mm (11.1”)
Weight: 31g (1.1oz)
Radio:
3 Channel - Included
See the full Ripmax range at www.ripmax.com
25
NEW ITEMS 2012
Micro Super Cub RTF
It’s more than a ready-to-fly micro — it’s
one of today’s easiest ways to enjoy an
aviation classic. With a wingspan of almost
18”, the Super Cub can use almost any open
area as a flying field: parks, playgrounds,
backyards — even gyms. And since the
Super Cub arrives with everything you
need, you can be out the door and on
your way to the airfield closest you in
next to no time.
• Nothing left to buy! Even “AA” radio
batteries are included!
• Factory-finished, all-foam and complete
with wing struts, fairings and tailwheel.
• Li-Po pack gives you up to 10 minutes of
flight time.
• Includes a new Tactic 2.4GHz micro radio
system.
A-HCAA2552
www.ripmax.com
g
Ever ythin
.
..
Included
even
Batter ies
for the
Tx!
Weighs
Only
29g!
Wingspan: 450mm (17.7”)
Length: 335mm (13.2”)
Weight: 29g (1oz)
Radio:
3 Channel
Micro Super Cub RTF 2.4GHz.................... £74.99
Micro Playmate RTF 2.4gHz
• Fully assembled
with colourful trim
• Factory-installed
receiver/servo/ESC
control module
• 3 channel, 2.4GHz
micro radio with
built-in battery charger
• Rechargeable 3.7V
130mAh Li-Po flight pack
No time for a trip to the field? Fly the
Playmate right where you are, inside
or out! With this compact model, you
can fly in your yard...in a park...or
turn a large indoor area into a
convenient, all-weather
flying site.
Easy
to F ly!
Wingspan: 450mm (17.7”)
Length: 335mm (13.2”)
Weight: 29g (1oz)
Radio:
3 Channel
A-HCAA2550
Flyzone Micro Playmate RTF 2.4GHz....... £69.99
Micro Fokker DR1 RTF 2.4gHz
With the Fokker Dr.1, figuring out where to fly
it is as easy as everything else about it. Its
compact, 14.1” wingspan makes it easy to take
almost anywhere, from your own backyard to
the gym at the school. And you’ll need to decide
quick, because the Fokker Dr.1 requires very
little assembly - and nothing else. Everything’s
included; charge your pack and you’re ready for
fun!
• 100% complete. Requires only a few minutes
before flying!
• Includes a new 2.4GHz Tactic 3 channel micro
radio
• Arrives finished with a pilot figure, machine
gun and installed replica radial for added
authenticity.
A-HCAA2554 Flyzone Micro Fokker DR1 RTF...... £84.99
26
Distributed to all good model shops by:
Wingspan: 360mm (14.1”)
Length: 305mm (12”)
Weight: 27g (1.27oz)
Radio:
3 Channel
Fly from
the
Tiniest
of Sites!
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
Mr. Mulligan EP ARTF
It was known as the Howard DGA-6 at the
factory, but to everyone else, it was simply the Mr. Mulligan.
Now, ElectriFly have recreated the all-time racing great in
detail as an all-electric replica and impressive, 52” span sport
scale flyer!
• Captures the iconic original in realistic detail with a replica
radial, working flaps, a ‘hidden’ battery hatch and painted
fibreglass parts.
• Sized for transportation ease — and easy handling in a
breeze.
• A pre-built balsa airframe, painted fibreglass parts and
factory-applied MonoKote film contribute to fast assembly
and superb good looks.
• Perfect for intermediate pilots with a taste for scale looks
and electric ease.
Wingspan: 1335mm (52.5”)
Length: 1055mm (41.5”)
Motor:
3525/07 Required
Radio:
4 Channel
Servos: 4 Micro Servos
A-GPMA1485
Mr.Mulligan EP ARTF................................ £229.99
Sprite 750 RTF Mini Glider
The smallest in a new series of almost ready to fly electric
powered foam aircraft from Joysway. Supplied complete with
2.4GHz radio, brushed 180 class pusher motor, 2S 250mAh
Li-Po and balance charger.
Flight-ready in a matter of minutes, the Sprite is remarkably
easy to fly and makes the perfect first model. Simple to
hand launch and will fly from the smallest of fields, it is
moulded from tough EPO foam. With rudder, elevator and
throttle control, the Sprite uses a lightweight two cell Li-Po
which is easily removed
Wingspan: 750mm (29.5”)
for charging via the
Length: 490mm (19.3”)
magnetically attached
Weight: 145g (5.12oz)
canopy. Just a few
180 class (Inc.)
minutes of assembly time Motor:
Radio:
3 Channel (Inc.)
required.
Distributed to all good model shops by:
A-JS-6101RTF Sprite 750 RTF Mini Glider 2.4GHz................ £64.99
See the full Ripmax range at www.ripmax.com
27
NEW ITEMS 2012
www.ripmax.com
Performer 1100 Glider ARTF
Wingspan: 1100mm (43.25”)
Length: 730mm (28.75”)
Weight: 420g (14.85oz)
Motor:
Brushless (Inc.)
Radio:
4 Channel (Inc.)
With a wingspan of 1100mm,
the new Performer is just
that... a great performer!
With aileron, elevator, rudder
and throttle control, it has
the manoeuvrability to hold
the interest of the experienced
flyer, but is stable enough to make it
suitable for the newcomer too.
With a powerful brushless pusher motor
mounted safely above the wing, the Performer
is simple to hand launch and has sufficient power
for gentle aerobatics.
Supplied almost ready to fly or complete
with 2.4GHz radio with three pre-installed
9g servos plus 2 cell (7.4v) Li-Po and
balance charger. Just requires very
minor final assembly before taking to the
local flying field.
A-JS-6102
Performer 1100 Glider ARTF............................................................... £74.99
A-JS-6102/2.4 Performer 1100 Glider 2.4GHz.......................................................... £139.99
Freeman 1600 Glider ARTF
The largest in this new
series of pusher models
from Joysway, with a
wingspan of nearly 1600mm,
it’s very easy to see in the air
- an important feature when you’re
learning to fly. Supplied almost ready to
fly or complete with 2.4GHz radio, powerful,
brushless pusher motor, 18A ESC, four 9g
servos plus a 1800mAH 3S Li-Po and
balance charger.
Very quick to assemble and no glue
required! Like the others in the series,
it flies from a simple, safe hand launch
and with aileron, elevator, rudder and throttle
control, it is capable of mild aerobatics.
Wingspan: 1580mm (62.25”)
Length: 960mm (37.75”)
Weight: 800g (28.2oz)
Motor:
Brushless (Inc.)
Radio:
4 Channel (Inc.)
A-JS-6103
Freeman 1600 Glider ARTF.............................................. £89.99
A-JS-6103/2.4 Freeman 1600 Glider 2.4GHz......................................... £179.99
28
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
J3-Cub Brushless ARTF
With durable EPO foam construction, the new Super Cub
is available in two exciting options - as an almost ready to
fly model with servos factory installed and ready for your
choice of transmitter and receiver, or as a Ready to Fly
with Joysway 2.4GHz radio pre-installed. Both versions
come complete with powerful brushless motor plus 18A
electronic speed controller and require your choice of 2S
1200mAh 15C Li-Po pack and balance charger
to complete. With aileron, elevator, rudder
and throttle control, the Super Cub
makes a great second model
or first aileron model when
competent with a rudder/
elevator aircraft.
With its sprung
undercarriage, wing struts
and dummy engine, the Super
A-JS-6203
Cub looks as terrific on the ground
A-JS-6203/2.4
as it performs in the air.
Wingspan: 950mm (37.5”)
Length: 640mm (25.25”)
Weight: 455g (16oz)
Motor:
Brushless (Inc.)
Radio:
4 Channel (Inc.)
Super Cub Brushless ARTF...........£84.99
Super Cub Brushless 2.4GHz......£144.99
Nine Eagles
Draco RTF
Rotor Ø:
188mm (7.4”)
Overall Length:213mm (8.4”)
Motors x 2:
ø6mm - (Inc.)
Li-Po Battery: 3.7v 110mAh - (Inc.)
2.4GHz Radio:4 Channel - (Inc.)
An easy to fly,
electric powered contra-rotating model helicopter with versatile,
4 function, Mode 1 / Mode 2 switchable transmitter and
lightweight Li-Po flight battery. Completely ready to fly straight
from the box - nothing else required!
• Lightweight, Micro-Size!
• Super Stable Performance.
• Crash Resistant Construction.
• Lithium Polymer Flight Pack Included.
• Multi-Mode Transmitter with Integral Charger.
A-NE24202001A
Nine Eagles Draco RTF................... £64.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
29
NEW ITEMS 2012
The Solo Pro
120 3G flybarless 3D micro helicopter is here! And it
is a very capable performer! Its high quality flybarless
head gives a stable hover, but amazing agility for 3D
aerobatics. Its precision and speed make it feel like
you’re flying a much bigger helicopter.
Ready to fly straight out the box, the model comes
complete with Li-Po, charger and quality J6 Pro
2.4GHz transmitter that is FTR
compatible - so the Solo Pro
125 can also be flown with
your favourite S-FHSS Futaba
transmitter!
A-NE125RTF
www.ripmax.com
le
3D Capab
!
li
e
Micro H
High quality J6 Pro transmitter
features channel reverse,
dual rates, CCPM mix set-up,
adjustable pitch and throttle
curves, gyro sensitivity and more!
Ready
to F ly!
Nine Eagles Solo Pro 125 S-FHSS RTF...................£TBA
SOLO PRO
180 3D
The Solo Pro 180
3D is a very high
performance
flybarless
collective pitch 3D micro
helicopter. With a flying weight of
only 105g, this is one small yet very
capable heli!
It has a brushless main motor,
shaft driven tail and high quality
flybarless head design. The Solo
Pro 180 really does take micro
helicopters to a whole new level.
Like the Solo Pro 125, the 180 3D
comes complete with the J6 Pro
transmitter and is compatible with
all S-FHSS Futaba transmitters too!
A-NE180RTF
A-NE180RTFEUR
30
Distributed to all good model shops by:
le
3D Capab
o
r
Mic
Heli!
Rotor Ø:
Length:
Motor:
Li-Po
Radio:
318mm
360mm
Brushless
3.7v 680mAh - (Inc.)
2.4GHz 6 Channel - (Inc.)
Nine Eagles Solo Pro 180 S-FHSS RTF.................................. £209.99
Nine Eagles Solo Pro 180 S-FHSS RTF - Euro..................... £209.99
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
Hot on the heels of the superb Solo Pro, the new Bravo SX
from Nine Eagles is sure to excite the scale and sport flying
enthusiast. With a detailed scale fuselage based on the
popular Hughes 500, the Bravo SX is lightweight, tough and
stable in flight. Perfect for flying indoors or outdoors in calm
weather. Supplied complete with Mode 1/2 transmitter (with
built in battery charger) plus working blue ‘navigation’ light and
spotlight.
• Scale Hughes 500 body.
• Working Lights.
• Crash Resistant Construction.
• Li-Po Flight Pack Included.
• Multi-Mode Transmitter.
A-NE24204001A
Rotor Diameter:190mm (7.48”)
Overall Length: 229mm (9.02”)
Motors:
ø6mm x 2 - (Inc.)
Li-Po Battery: 3.7v 110mAh - (Inc.)
2.4GHz Radio: 4 Channel - (Inc.)
Bravo SX RTF................................... £74.99
Nine Eagles SoloPro 328 RTF
Substantially bigger
than the SoloPro,
the new 328 has
a 330mm diameter rotor and comes complete
with Nine Eagles’ new J4 Pro transmitter,
which means the model is now FTR (Futaba
Transmitter Ready) and can also be flown
with any Futaba S-FHSS radio - such as
the 6J, new 8J and 18MZ! The perfect
follow on from a co-axial heli.
A-NE328RTFR
A-NE328FTRR
A-NE24202001AY
A-NE328RTFY
A-NE24207001A
A-NE328FTRY
Rotor Ø:330mm (13.0”)
Length: 310mm (12.2”)
Motors: 180 Class - (Inc.)
Li-Po: 3.7v 500mAh - (Inc.)
Radio: 2.4GHz 4 Channel - (Inc.)
F utaba
ter
T ransmit
!
y
Read
Solo Pro 328 S-FHSS RTF (Red)..............£99.99
Solo Pro 328 S-FHSS FTR (Red) .............£79.99
SoloPro
328S-FHSS
RTF Yellow.
......................
£99.99
Solo
Pro 328
RTF.(Yellow).
.........£99.99
Nine
Eagles
SoloProFTR
328(Yellow).
RTF Red
..... £74.99
Solo
Pro
328 S-FHSS
.........£79.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
31
NEW ITEMS 2012
GRP AND CARBON Helicopter
Blades and Paddles
High quality carbon fibre helicopter main blades
are suitable for both Sport and 3D uses. The
internal construction is strong and optimised to take
advantage of the immense strength that helicopter
blades require. When combined with the carbon fibre
external laminate, they become exceptionally rigid
also. The distinctive white colour scheme identifies
the carbon versions yet still maintains good visibility
in flight. The GRP versions are identifiable with their
white scheme and black flash.
www.ripmax.com
A-RMXCB205
Ripmax Carbon Main Blades 205mm
250 class
£10.99
A-RMXCB360
Ripmax Carbon Main Blades 360mm
500 class
£18.99
A-RMXCB690
Ripmax Carbon Main Blades 690mm
700/61-91 class
£69.99
A-RMXCP060
Ripmax Carbon Paddles 60mm
450 class
£7.99
A-RMXCP068
Ripmax Carbon Paddles 68mm
500 class
£11.99
A-RMXCP088
Ripmax Carbon Paddles 88mm
600/50/500 class
£15.99
A-RMXCP096
Ripmax Carbon Paddles 96mm
600/700 class
£19.99
A-RMXCTB044
Ripmax Carbon Tail Blades 44mm
250 class
£5.50
A-RMXCTB057
Ripmax Carbon Tail Blades 57mm
500 class
£5.99
A-RMXCTB062
Ripmax Carbon Tail Blades 62mm
450/500 class
£7.99
A-RMXCTB070
Ripmax Carbon Tail Blades 70mm
500/550 class
£8.99
A-RMXCTB094
Ripmax Carbon Tail Blades 94mm
600/30/50 class
£12.99
A-RMXCTB103
Ripmax Carbon Tail Blades 103mm
700/91 class
£13.99
A-RMXGB205
Ripmax GRP Main Blades 205mm
250 class
£7.50
A-RMXGB360
Ripmax GRP Main Blades 360mm
500 class
£10.99
A-RMXGB690
Ripmax GRP Main Blades 690mm
700/61-91 class
£49.99
2.4GHz...
Not Infra
Red !
Rotor Ø: 190mm
Length: 230mm
Weight: 38g
Radio: 3 Ch 2.4GHz (Inc.)
Li-Po: 3.7V 180mAh (Inc.)
Ripmax Sniper
2.4GHz RTF
The new Sniper helicopter offers stability
and accuracy... it’s the perfect
combination! Its sturdy airframe
makes this 3 channel helicopter perfect for beginners - although more
experienced pilots will love the precise control this model offers. Perfect
for spot landing practise around the house!
Unlike other less-well-equipped models of this kind, the Sniper is
supplied ready to fly with a 2.4GHz transmitter rather than infra red. The
transmitter also doubles up as a charging port and with the included
USB charger you’ll be ready to dart around the skies in no time!
A-RMX1000
32
Ripmax Sniper 2.4GHz RTF..............................£29.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
st
T he Mo sive 3D
s
Aggre e Ever!
Machin
Embla is perfect as a first outdoor model after
flying with indoor models... but in the hands of an
experienced pilot, it is a machine capable of handling
the most aggressive 3D flying you ever imagined
possible with a 450 size model. Supplied with the
all-metal SLM flybarless head, powerful 29/10T/3700
brushless motor and 40A brushless ESC, it requires
your choice of 3S 2500mAh Li-Po, suitable radio and
3-axis gyro.
The flybarless design means there is less power loss
and a maximum pitch range of +/-16° (total of 32
degrees) is available.
• Factory Painted Fibreglass Canopy.
• All metal 120°SWM swashplate included.
• Carbon main frames used for maximum 3D performance.
• Durable, tried and tested Hirobo belt driven tail.
• Tail rotor hub manufactured from aluminum and stainless
steel for maximum strength.
• Carbon vertical fin and horizontal tail.
• 325mm carbon symmetrical main blades included.
A-H0304-905 Embla 450E SLM Kit w/ESC & Motor...... £449.99
Distributed to all good model shops by:
Rotor Ø 725mm
Length: 657mm
Height: 198mm
Weight: 700g (Approx)
Motor: 29/10T/3700 Brushless (Inc.)
ESC: 40A Brushless (Inc.)
Tail Ø: 153mm
See the full Ripmax range at www.ripmax.com
33
NEW ITEMS 2012
www.ripmax.com
ST Model ASW-17 EP ARTF
The German manufactured ASW-17 from the 1970s has been faithfully reproduced in
foam by ST Models. The ASW-17 is a potent glider with no need for a tow due to the
power supplied by an electric motor mounted at the front of the aircraft. Spotting the
ASW-17 will be easy thanks to its 2.11m wingspan and distinctive red-on-white colour
scheme.
Easy Disassembly
for Transpor t
• 2110mm Wingspan!
• Folding Prop
• Includes Brushless Motor, ESC and servos!
• Distinctive Colour Scheme!
Br ushless Motor, ESC
and Servos Included !
A-STM130
Wingspan: 2110mm (83.0”)
Length: 995mm (39.0”)
Motor:
Brushless (Inc.)
Radio:
4 Channel
Servos: 4 Micro Servos (Inc.)
ST Model ASW-17 EP ARTF......................................................... £89.99
ST Model Beaver EP ARTF
Working Nav Light
Set Included !
Versatile is the word that best sums up the Beaver EP! It’s
tough, small enough to fly from the tiniest of fields, is equipped
with effective flaps and powerful brushless motor. For operation
from water, there’s even an optional float set! Supplied factory
moulded in durable EPO foam, it is flight ready after minimum
final assembly and installation of your choice of radio. Servos
are factory fitted, as it the brushless motor and ESC. Perfect
for intermediate pilots looking for a second model or first aileron
model.
Wingspan: 1520mm (59.84”)
Length: 965mm (38.0”)
Motor:
Brushless (Inc.)
Radio:
5 Channel
Servos: 5 Micro Servos (Inc.)
Optional Scale Float Set!
A-STM140
ST Model Beaver EP ARTF................................. £154.99
A-STM140FL ST Model Beaver Float Set................................... £15.99
34
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
Tech-One Venus EP ARTF
A highly advanced 'profile' style
3D model that is far more than
just the usual foam sheet - the
EPO construction proves itself to
be both stronger and lighter. Unlike
normal 'profile' models, the Venus 3D
incorporates a special plastic nose
moulding/motor mount to spread
the shock of impacts to more of the
structure. Just behind it is a special internal
compartment for both the ESC and 2S Li-Po
battery. The ultra slow speed performance is
predictable and dramatic, thanks
to the large aileron, elevator and
rudder surface areas. The deep
fuselage provides great lift for
extended knife edge flight.
in
Ready
t
h
g
i
l
F
Hour!
n
a
r
e
d
Un
Wing side force generators are
standard and drag brakes for
the ailerons are supplied if
you want them. The durable nature of the
construction makes the Venus 3D suitable
for outdoor flying as well on calm days. You
can really explore that
‘over 1:1’ power to weight ratio!
1 hour and some
regular cyano will
have one ready for
flight.
F ly it
or
Indoors
Out !
A-TEC08100B Tech-One Venus EP ARTF (Blue)..................£49.99
M-TEC08107
Brushless Motor Venus........£19.99
A-TEC08100R Tech-One Venus EP ARTF (Red)..................£49.99
A-TEC08100Y Tech-One Venus EP ARTF (Yellow)..............£49.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
35
NEW ITEMS 2012
www.ripmax.com
Elder 40
The Elder 40’s legacy began in 1985, when
it was first introduced by Top Flite. Modellers
immediately took to this nostalgic-looking kit,
and Elder 40s filled the skies at flying fields
everywhere. Now Top Flite is bringing this classic
back, with one major distinction: Gold Edition
CAD engineering, for the most straightforward,
most accurate assembly possible. The result is a
scale replica of an aviation legend that’s a joy to
build, as well as a pleasure to fly!
Wind in
the Wires
nt !
Exciteme
Wingspan: 1651mm (65.0”)
Length: 1005mm (39.5”)
Engine: .46~.55 Two Stroke
.70~.72 Four Stroke
Radio:
4 Channel
Servos: 7 Servos
• An ideal second model
— can be flight-ready in just
a few weekends.
• CAD-engineered, all-wood parts interlock
precisely to produce a strong, straight
structure; photo-illustrated instructions guide
you through the building process.
• Pre-shaped leading and trailing edges and
built-up wing tips.
• Handles as easily as any sport plane, with
“wind in the wires” excitement.
• The open rear section of the fuselage, with its
trusswork and gussets, further exemplifies the
plane’s vintage heritage.
A-TOPA0215 Elder 40 .40-.46...................................................................... £124.99
F4-U Corsair Gold Edition
62" ARTF
Wingspan: 1590mm (62.5”)
Length: 1285mm (50.5”)
Engine: .61~.65 Two Stroke
.91~.95 Four Stroke
Radio:
5+ Channel
Servos: 7+ Servos
Regarded
by many as
the most formidable
of all WWII American fighters,
the F4U Corsair was a versatile
aircraft that provided excellent air
and ground support. Now Top Flite
have managed to combine Gold
Edition engineering with easy
ARTF assembly!
With all built-up and sheeted wood
construction, covered in matt-finish
MonoKote the Corsair features
functioning multi-section flaps,
recessed gauges on the instrument
panel for added scale realism with
pre-hinged ailerons and flaps to
reduce assembly time and effort
with hidden rudder and elevator
linkages enhance the plane’s scale
appearance.
There’s even a full cockpit interior
that includes seat and sides, plus a
3D instrument panel with recessed
gauges, rudder pedals and joy stick!
A-TOPA0951 F4-U Corsair Gold Edition 62" ARTF...................................£449.99
36
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
Top Speed 3 ARR CompETITION - White
Knowledge gained from three successful seasons of race-testing
inspired the refinements found in this latest generation of the
Top Speed. The result is a .21-size tunnel hull whose
superior handling and impressive speed have already
earned World Championship titles.
t for
Per fec
M
O.S. 21X !
e
Pow r
World
ion !
C hamp
Length: 915mm (36”)
Height: 154mm (6”)
Width: 265mm (10.5”)
B-AQUB0010
Weight:
Radio:
Engine:
2.3kg (5lb)
2 Channel
3.5cc
Top Speed 3 ARR Competition White..........................................£149.99
Reef Racer 2 EP RTR
Mini Alligator Tours Airboat EP RTR
Learning to drive a full-size airboat can take months. But with
the Mini Alligator Tours, getting comfortable behind the wheel
takes just a few minutes. Since there’s nothing to build, you
can be on the water and learning to do skid turns almost
immediately. It’s a simple little boat that virtually anyone can
enjoy. And the best part of it is, that’s it’s just as affordable as
it is fun to run!
A durable injection-moulded cage provides added safety for
the driver and effective damage protection for the prop and
motor. Charge up a pack, and the powerful 380 motor will
deliver up to 10 minutes of exciting
airboat action!
The super-quick vee-hull Reef Racer 2 comes complete
and ready to run, with a durable hull and pre-painted hatch,
with factory-applied decals - there's even a painted driver
figure! The easily removable watertight covers that protect
the electronics equipment and the Reef Racer 2's selfrighting hull design ensure non-stop action! With amazing
manoeuvrability, it is perfect for pools, small ponds and lakes!
Length:
Beam:
Height:
Weight:
465mm (18.3”)
175mm (7”)
185mm (7.3”)
695g (24.06 oz)
to
Ready
Run !
2.4GHz
Radio
d
Include
Length:
Beam:
Radio:
Battery:
380mm (15”)
145mm (5.3”)
2Ch Included
1100mAh (Inc.)
B-AQUB14
le in
Avai lab nd
rs a
6 colou cies!
n
F reque
Reef Racer 2 EP RTR................................ £94.99
Distributed to all good model shops by:
B-AQUB09
Mini Aligator Tours Airboat EP RTR......... £109.99
See the full Ripmax range at www.ripmax.com
37
NEW ITEMS 2012
www.ripmax.com
Vela 1 Metre Sail Boat 2.4GHz RTR
While the Vela one metre yacht is easy enough for
beginners, it also boasts cutting-edge materials and
performance features that make it a worthy competitor.
When not on the water, the Vela’s impressive
dimensions, brilliant colours and included stand make it
equally impressive to display.
Except for “AA” batteries for the transmitter, everything
required for operation is included - as well as a folding
wooden stand!
• Over 6-1/2 feet (2 metres)
tall.
• 2.4GHz yacht radio
system with high-torque
sail servo included.
• High-performance
fibreglass racing hull.
Length:
Beam:
Height:
Weight:
1016mm (40”)
165mm (6.5”)
2006mm (79”)
2720g (6lb)
Tall !
O ver 6’
B-AQUB0200
Vela 1 Metre Sail Boat 2.4GHz RTR........................................................£449.99
Mini Wildcat Catamaran EP RTR 27FM
New modellers can jump right into R/C boat racing with
AquaCraft's Mini Wildcat...and seasoned sailors will enjoy it,
too. Twin electric motors power it across the water, with little
noise but lots of action - ideal for any local lake or pond.
Length:
Beam:
Weight:
Battery:
Radio:
380mm (15”)
145mm (5.3”)
480g (16.9oz)
1100mAh (7.2V) NiMH
2 Channel
i-MH
Radio, N ter y and
at
Dr ive B C harger
d
12v F iel
!
included
B-AQUB19
Minimono Brushless 2.4gHz RTR
The Minimono Brushless 2.4GHz RTR represents a new breed of boat:
a mini sized model equipped with a brushless motor and an ESC that
can use a Li-Po battery. Its smaller size and responsive handling let
you race on smaller bodies of water, and it’s very affordable to operate
too! Supplied complete with 20A ESC, 2800Kv brushless motor and a
quality Tactic 2.4GHz radio system. All you need to race is an 11.1V
1000mAh Li-Po battery and suitable charger, plus 4 AA batteries for the
transmitter.
Mini Wildcat Catamaran EP RTR...............................£109.99
Length:
Height:
Beam:
Weight:
Radio:
Motor:
405mm (16”)
83mm (3.25”)
140mm (5.5”)
285g (10 oz)
2 Channel (Inc.)
2800kV (Inc.)
for
Per fec t onds
p
smaller !
ls
and poo
B-AQUB1805
38
Minimono Brushless 2.4GHz RTR.......... £159.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
Motley Crew Catamaran RTR 2.4GHz
Right down to the licensed trim scheme, AquaCraft's Motley Crew Fast
Electric Catamaran captures the exciting style of Ron & Scott Roman's
world champion offshore racer. All the latest performance parts are
here - including a brushless power system and 2.4GHz radio - for
dominating the competition at
the highest levels. But the
Length: 808mm (31.75”)
Motley Crew is also easy
Beam: 264mm (10.4”)
enough for sport modellers
Radio: 2.4GHz (Inc.)
to enjoy!
Motor: 6 Pole 1800kV (Inc.)
Just requires 2 x 7.4V 4200mAh
Li-Po batteries and 4 AA batteries to complete.
e
Durabl
p
Ripsto
Nylon
Sai ls!
B-AQUB2100
Height
of 2M!
Motley Crew Catamaran RTR 2.4GHz.................................... £449.99
Also
le
Avai lab
in Red !
High Quality 2
Channel
Fully Proportional
2.4GHz Radio
Included
Master the elements with Joysway's new
Focus Yacht. A large, 1 metre long yacht,
this model is sure to cause ripples at the local pond
or boat club. Factory finished from quality durable
components and requiring just AA batteries to
complete. Quality 2.4GHz radio and
sail winch servo included.
Length:
Beam:
Mast Height:
Overall Height:
Radio System:
Total Sail Area: Total Weight:
Quality
GRP
Hull !
B-JS-9902
B-JS-9902BLK
450mm (17.71”)
165mm (6.49”)
600g (21.16oz)
2040mm (80.1”)
2 Channel (Included)
62dm² (961in²)
3.2Kg (7.1lb)
Joysway Focus Yacht (Red).................................................. £229.99
Joysway Focus Yacht (Blue)................................................ £229.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
39
NEW ITEMS 2012
www.ripmax.com
Ready to
Run !
g
Ever ythin
Included !
30km/h
Top Speed
Offering the perfect blend of
high performance at an incredible low price, the new
Joysway Warrior Offshore Lite is all set to make a big
splash!
The all moulded hull is supplied complete with a factory
fitted water cooled motor, matching 30A ESC, 9 gram
servo, new 2 Channel 2.4GHz transmitter, 7.2V Ni-MH
battery and mains operated charger.
Maximum fun - with minimum spending!
B-JS-8206
Length:
Beam:
Weight:
Servos:
Radio: 420mm (16.5”)
120mm (4.75”)
450g (15.9oz)
1x9g (Included)
2 Channel 2.4GHz (Included)
Warrior Offshore Lite............................. £74.99
Ready
to Run !
The bigger brother to the Magic Cat,
the Sea Rider Offshore Lite has the
same specification and inclusions
as the Warrior Offshore Lite above...
only in a catamaran format, rather than the deep vee hull.
Supplied with everything
in the box... 2.4GHz
transmitter, 9 gram
steering servo, 7.2V
Ni-MH and charger.
Let the fun begin!
B-JS-8208
40
Length:
Beam:
Weight:
Servos:
Radio: g
Ever ythin
Included !
420mm (16.5”)
120mm (4.75”)
455g (16.0oz)
1x9g (Included)
2 Channel 2.4GHz (Included)
Sea Rider Offshore Lite......................... £74.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
SUPER MONO X
45km/h
Top Speed
Take a high performance mono hull design and equip it with
a water-cooled 2212-3300kV out-runner brushless motor
and you get the Super Mono X! With a top speed of around
45km/h, it certainly doesn’t hang around. Featuring a CNC
aluminium alloy rudder, stainless steel turn fins and trim
tabs, the Super Mono X uses an efficient 3.2mm flex drive
to the two-blade nylon waterscrew. Supplied with a powerful
9g steering servo, 20A ESC and motor plus 2.4GHz radio
system, it requires your choice of 3S (11.1v) 1300~1800mAh
Li-Po and balance charger to complete.
Perfect for your local pond, river or model boating area.
Seriously fast, easy to control and great fun!
Length:
Beam:
Weight:
Servos:
Radio: 420mm (16.5”)
120mm (4.75”)
450g (15.9oz)
1x9g (Included)
2 Channel 2.4GHz (Included)
• Factory installed 2.4GHz Radio System.
• 20A Electronic Speed Controller and powerful 3300kV
Brushless Outrunner motor included.
• Moulded ABS hull.
B-JS-8209 Super Mono X...........................................£119.99
SUPER 1000 WILDCAT
80+km/h
!
Top Speed
With the Wildcat, it’s all about performance!
Boasting an incredible 80+ km/h top speed it has a high
quality fibreglass hull and comes complete with three channel
2.4GHz radio and 9Kg steering servo. Power - and there’s
plenty of it! - comes from the factory installed 4-pole water
cooled brushless motor and 100A ESC. Drive to the 3 blade
metal waterscrew is via a 5mm flex drive. Of course the
rudder and support is CNC machined from aluminium. Two
3S 4000mAh 30C Li-Po batteries are required to complete.
Distributed to all good model shops by:
• Factory installed 2.4GHz
Radio System.
• 100A Electronic Speed
Controller and powerful
Brushless motor included.
• Fibreglass hull.
B-JS-9502S
Length:
Beam:
Weight:
Servos:
Radio: 870mm (34.25”)
290mm (11.42”)
2700g (95.25oz)
1x9Kg (Included)
3 Channel 2.4GHz (Included)
Wildcat Catamaran.....................................£449.99
See the full Ripmax range at www.ripmax.com
41
NEW ITEMS 2012
Hull Length:
Total Length:
Beam:
Weight:
1200mm (47.24”)
1300mm (51.18”)
340mm (13.38”)
5.3kg (11.68lb)
www.ripmax.com
80+km/h
!
Top Speed
The Silverline is a high performance Deep Vee boat with a 1.2m
long fibreglass hull and the choice of brushless electric or 26cc
petrol power. Both models come complete with high quality 3
channel 2.4GHz radio and powerful 9Kg steering servo. Power
is transferred to the 2 blade metal waterscrew via a tough 6mm
flex cable drive and the model is controlled by a CNC machined
aluminium rudder and hardware.
This version, the EP, comes complete with a 4 pole brushless
motor and 120A ESC that is capable of powering the model to a
blistering 80+km/h.
Requires an 8S (29.6V) 5000Ah 35C Li-Po pack, suitable
balance charger and 12 AA batteries for the transmitter and
receiver.
INCLUDED
• Water Cooled 4 Pole 5692 Brushless Inrunner Motor.
• Water Cooled 120A HV Brushless ESC.
• Powerful 9Kg Steering Servo.
• 2.4GHz 3 Channel Proportional Radio System.
• 6mm Flex Drive System.
• 2 Blade CNC Aluminium Alloy Waterscrew.
B-JS-9111H Silverline RTR EP 2.4GHz............................... £749.99
The GP version of the Silverline
comes with a factory installed 26cc
petrol engine with effective
muffler and a 500cc fuel
tank that gives 20+
minute run times. Just
requires unleaded petrol,
two stroke oil and 12 AA
batteries for the transmitter
and receiver.
Hull Length:
Total Length:
Beam:
Weight: 1200mm (47.24”)
1300mm (51.18”)
340mm (13.38”)
6.1kg (13.44lb)
INCLUDED
• 26cc Water Cooled Petrol Engine with Muffler.
• Powerful 9Kg Steering Servo and 37g Throttle Servo.
• 2.4GHz 3 Channel Proportional Radio System.
• 6mm Flex Drive System.
• 500cc Fuel Tank.
• 2 Blade CNC Aluminium Alloy Waterscrew.
60+km/h
!
Top Speed
B-JS-9111A Silverline RTR 2.4GHz w/26cc..................£599.99
80+km/h !
Hull Length:
Total Length:
Beam:
Weight:
1020mm (40.15”)
1220mm (48.03”)
450mm (17.71”)
6.2kg (13.66lb)
Tunnel hulls always
look quick - even before
they hit the water... and the
Joysway F1 is no exception!
It features a high quality fibreglass hull
and top deck and detailed Mercury outboard
housing the rudder and 2 blade CNC aluminium alloy waterscrew.
This EP version comes complete with a 4 pole brushless motor and
120A ESC that is capable of powering the model to over 80km/h!
Requires an 8S (29.6V) 5000Ah 35C Li-Po pack and charger.
B-JS-9113H F1 EP RTR 2.4GHz.................................................. £749.99
42
Distributed to all good model shops by:
INCLUDED
• Water Cooled 4 Pole 5692 Brushless Inrunner Motor.
• Water Cooled 120A HV Brushless ESC.
• 2.4GHz 3 Channel Proportional Radio.
• Powerful 9Kg Steering Servo.
• 6mm Flex Drive System.
• 2 Blade CNC Aluminium Alloy Propeller.
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
s
80+km/h
!
Top Speed
F i breglas
Hull
Take your passion for high
performance catamarans to the
next level with the US•1! Like the
Silverline, it is available in a choice of
brushless electric or 26cc petrol power.
Supplied complete with high quality 3 channel,
2.4GHz pistol grip radio, high torque 9Kg steering
servo and beautifully CNC machined waterscrew,
aluminium alloy rudder and hardware. The EP
version here comes complete with a 4 pole
brushless motor and 120A ESC that is capable of
powering the model to amazing 80+km/h.
Requires an 8S (29.6V) 5000Ah 35C Li-Po pack,
suitable balance charger and 12 AA batteries for
the transmitter and receiver.
Hull Length:
Total Length:
Beam:
Weight:
1160mm (45.66”)
1285mm (50.59”)
405mm (15.94”)
6.6kg (14.55lb)
Hull Length:
Total Length:
Beam:
Weight:
INCLUDED
• Water Cooled 4 Pole 5692 Brushless Inrunner Motor
• Water Cooled 120A HV Brushless ESC
• 2.4GHz 3 Channel Proportional Radio
• Powerful 9Kg Steering Servo
• 6mm Flex Drive System
• 2 Blade CNC Aluminium Alloy Propeller
B-JS-9112H US.1 EP RTR 2.4GHz........... £749.99
60+km/h
!
Top Speed
The GP version of the Silverline comes with
a factory installed 26cc petrol engine with
effective muffler and a 500cc fuel tank that gives
20+ minute run times. Just requires unleaded
petrol, two stroke oil and 12 AA batteries for the
transmitter and receiver.
B-JS-9112A US.1 RTR 2.4GHz w/26cc.....£599.99
Hull Length: 1020mm (40.15”)
Total Length: 1220mm (48.03”)
Beam:
450mm (17.71”)
Weight: 7kg (15.43lb)
INCLUDED
• 26cc Water Cooled Petrol.
Engine with Muffler.
• Powerful 9Kg Steering Servo and 37g Throttle Servo.
• 2.4GHz 3 Channel Proportional Radio System.
• 6mm Flex Drive System.
• 500cc Fuel Tank.
• 2 Blade CNC Aluminium Alloy Waterscrew.
s
F i breglas
Hull
e 60+km/h
T uned Pip
!
Top Speed
Included !
In keeping with the high performance hull design, the GP version of the
F1 comes complete with powerful 26cc petrol engine and tuned pipe.
Distributed to all good model shops by:
1160mm (45.66”)
1285mm (50.59”)
405mm (15.94”)
5.8kg (12.7lb)
INCLUDED
• 26cc Water Cooled Petrol
Engine with Muffler.
• Powerful 9Kg Steering Servo
and 37g Throttle Servo.
• 2.4GHz 3 Channel
Proportional Radio System.
• 6mm Flex Drive System.
• 500cc Fuel Tank.
• 2 Blade CNC Aluminium Alloy
Waterscrew.
B-JS-9113A Joysway F1 RTR 2.4GHz w/26cc........ £649.99
See the full Ripmax range at www.ripmax.com
43
NEW ITEMS 2012
www.ripmax.com
Rollcage opens for easy
access and maintenance!
XTM NITRO RAIL
The Nitro Rail has been designed with the characteristics of
a full-size sand rail. However, the Nitro Rail isn't restricted
to sand use... the factory-installed all-terrain tyres allow you
to take the Nitro Rail on all surfaces, from dirt to street, and
everywhere in between!
The Nitro Rail Off-Road Buggy is unlike any 1/8th scale
vehicle available today. In true sand-rail style, the Nitro Rail
is a nitro burning, rooster tail kicking, exhilarating beast
with looks to kill. The hard-core performance drivetrain,
with its tunable, race-inspired design of triple differential
gives you the power to put maximum traction to the dirt.
Powered by the big-block XTM .28 Racing engine, you'll
have horsepower-on-demand to tear it up whether you're
backyard bashing or catching big air in the dunes or on the
track. The heavy-duty suspension will handle it easily with
its multi-link arms, coil-over adjustable position shocks and
adjustable geometry.
.28 Nitro
Power!
Ready
to Run !
Length: 529mm (20.82”)
Height: 180mm (7.08”)
Weight: 3.74kg (8.25lb)
C-XTM-RAIL
44
Servos:
Hi Torque M. Geared Steering (Inc.)
I.C. Engine:
XTM .28 (Inc.)
Radio System: 2 Channel (Inc.)
•Custom Aluminium Roll Cage.
•4mm Aluminium Shock Towers.
•Heavy-Duty Drive-Line with Chrome-Plated Front CVDs.
•Adjustable Bi-Level High-Downforce Wing.
•Aluminium Side Frames Integrate with Chassis and Roll
Cage.
•Adjustable Toe-in and Camber, Front and Rear.
•Adjustable Front, Centre and Rear Differentials with the
use of After-Market Silicone Oils.
•All-Terrain Tyres Mounted on Black Wheels with Metal
Rings.
•Many Option Parts Available for Increased Performance
and Handling.
•Factory-Assembled with Factory-Printed Body Shell.
•Powerful .28 Rear Exhaust Nitro Engine with Pull-Start.
•High-Torque Tuned Pipe with Matching Exhaust Header.
•Dual Vented Disc Brakes.
•Large Fuel Tank with Splash Guard and Overflow Tube.
•Full Set of Sealed Ball Bearings for Drive-Line.
•High-Torque Metal-Geared Steering Servo.
•Threaded Aluminium Shocks with 3.5mm
Shock Shafts.
Nitro Rail 1:8 4WD RTR w/XTM28.................£359.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
EP
1/8 Scale
Run
Ready to
Hz with 2.4G
R/C!
omplete
C
d
e
i
l
p
p
Su
,
ter Radio
u
p
m
o
C
h
t
wi
C harger!
d
n
a
o
P
i
600mAh L
2
Length: 493mm (19.4”)
Width: 307mm (12.1”)
Height: 172mm (6.76”)
Radio:
2.4GHz (Inc.)
Motor & ESC: Brushless & 60A (Inc.)
Servo:
9kg Metal Geared (Inc.)
Primed for action! The DHK Optimus combines power and
performance in a devastating package that will leave all other
RTR buggies wanting. A potent 60A brushless speed controller
helps regulate power from the brushless motor. Three all-metal
geared differentials help transfer such monstrous power to all
four wheels; the front two being steered by a ballraced 9kg metal
geared servo - whilst the universal joints ensure smooth rotation
with reduced friction. The anodised aluminium chassis is balanced
at all four corners by full metal bodied shock absorbers working in
conjunction with the included front and rear roll bars to minimise
chassis roll and improve all-round grip.
Unusually for a car in this class, the transmitter, featuring a fully
computerised 2.4GHz FHSS system, has a full LCD display for
programming. Included as standard is 240v AC, balance charger
that can deliver 1A of charging. Another rare feature in a car at this
price level.
See the Optimus in Action!
www.youtube.com/ripmaxltd
If you are looking for a serious 1/8th electric buggy, with amazing
performance and specification but would rather not break the bank,
the DHK Optimus is the only logical choice.
C-DHK8383
DHK Optimus 4WD EP Buggy (Brushless).......................... £284.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
45
NEW ITEMS 2012
www.ripmax.com
CROCODILE 2WD BUGGY 1:5 SCALE 30CC
The Crocodile redefines ‘value for money’ by offering a big, 2WD
buggy with 2.4GHz radio and a powerful 30cc petrol engine that is fully
assembled. Steering comes courtesy of a 20kg metal geared servo.
Gears in the drive train are all metal as are the drive shafts and joints.
Once set, the engine’s mixture will hardly ever need adjustment and
an optional Tuned Pipe is also available. Throw in rough terrain
and jumps and the Crocodile will just take it all in its stride!
ar Shown)
(2 Speed C
Crocodile 2 Speed
Take a Crocodile and make it faster! That is exactly
what this upgrade car offers. This version offers
an automatic-change, two-speed gearbox. The
all-metal design is mega-strong to take the
power. Why not add the optional tuned pipe
and really see what large scale, off-road
performance is all about.
Radio
2.4GHz
d!
Include
Length:
Width:
Height:
Weight:
Engine:
700mm (27.55”)
400mm (15.74”)
350mm (13.77”)
8.3kg (18.38lbs)
30cc Petrol
High Quality
2.4GHz
Radio
Included.
C-RH501
River Hobby Crocodile Buggy.......................... £399.99
C-RH501T
River Hobby Crocodile Buggy (2 Speed)........ £449.99
30cc
Petrol
Power
RTR for
Under £450!
BLAZE 2wd TRUGGY 1:5 SCALE 30CC
Based on the tough Super Crocodile chassis
and drive train, the Blaze ‘truck’ features larger
wheels and tyres, to match its truggy inspired
bodyshell. The increase in track affords a little
more lateral stability and those huge tyres and
wheels give even better grip on a variety of
surfaces. The stylish body shell is factory
finished in a very visible colour scheme
leaving you in no doubt that this truck
means business!
Blaze 2 Speed
Now there’s an even faster Blaze... a 2-speed
upgrade version! Between the clutch and
the output shaft to the differential gearbox is an
auto-change, two-speed gearbox. The all-metal
design is mega strong to take the power that the
30cc engine and terrain throw at it. You can really
explore that additional performance by utilising
the extra stability that the increased track offers.
Length:
Width:
Height:
Weight:
Engine:
700mm (27.55”)
400mm (15.74”)
350mm (13.77”)
8.3kg (18.38lbs)
30cc Petrol
C-RH502
River Hobby Blaze Buggy.................................. £399.99
C-RH502T
River Hobby Blaze Buggy (2 Speed)................. £449.99
46
Distributed to all good model shops by:
(Single Speed
Car Shown)
2.4GHz
Radio
d!
Include
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
MATRIX
One Chassis Four configurations
The newly developed 1/5th scale petrol powered RC vehicles by CEN feature permanent 4WD and offer superior
performance to that of their contemporaries. 30cc of petroleum powered potency is mated to an aluminium countersunk
chassis, damped at all four corners by ultra big bore threaded aluminium oil filled shocks that absorb rough terrain while
maintaining balance and control, making these 1/5th scale monsters some of the largest, most powerful R/C cars of this
type around! Simply choose a vehicle style that best suits your driving and prepare the ground!
Monster
Truck
Short e
Cours
Truggy
Buggy
e of 4 Models
Choic
ower
30cc Petrol P
le
Huge 1/5 Sca
D
Permanent 4W
ition
sm
All Metal Tran
hocks
Long Stroke S
Chassis
Countersunk
hell
Pre-Painted S
Ready To Run
30cc
Petrol
Engine
Power!
m
Length: 750m
m
Height: 330m
m
Width: 450m
0mm
Wheelbase: 52
Weight: 15Kg
C-CEN5003
C-CEN5007
C-CEN5001
C-CEN5002
Ready
!
To Run
Quality
2.4GHz
Radio
d
Include
Matrix 5-T 1:5 Truggy 4WD RTR w/30cc.............................. £659.99
Matrix 5-SC 1:5 Short Course 4WD RTR w/30cc................ £659.99
Matrix 5-MT 1:5 Monster Truck 4WD RTR w/30cc.............. £659.99
Matrix 5-B 1:5 Buggy 4WD RTR w/30cc.............................. £649.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
47
NEW ITEMS 2012
www.ripmax.com
Blade balancer 450/500 Size
Set of 3 machined Allen drivers, 1.5,
2 and 2.5mm - perfect for most
applications and offering
plenty of grip due to
the fluted handle.
A high quality precision balancer suitable for smaller
helicopters up to 500 size. Made from a combination of
carbon fibre and CNC cut, anodised aluminium parts
with ballraces. Ready to use right
out of the box!!!
T-MG51124
A-RMXBAL450
Allen Driver Set (1.5/2/2.5mm)................... £14.50
Blade Balancer 450/500 Size.............£13.99
SkyRC IMAX Blade balancer
An professional blade balancer designed for making sure
your blades are in perfect balance. Use this tool to precisely
balance main blades, tail blades, props, ducted fans, head
assemblies and more!
• Adjustable diameter shaft from 3mm -15mm.
• 6 Precision ball bearings.
• Spirit level in base.
• Magnetic suspension for minimum friction.
• Many applications - from props to complete head
assemblies.
Prop
• Precise balancing with stable base.
ing!
• Weighs only 365g.
Balanc
Epoxy required? Think Devcon! Adheres to a wide range of
materials such a metal, wood, concrete, glass, china and
ceramics. Now available in a new easy-mix syringe in both 5
minute and slower setting, high strength, 2 ton variations plus
a new five minute epoxy in 1.25oz tubes.
S-DV031A
S-DV206A
S-DV208A
Devcon 2 Ton Epoxy - 25ml.................................£5.25
Devcon 5 Minute Epoxy - 1.125oz Tube..............£9.99
Devcon 5 Minute Epoxy - 25ml............................£5.25
Blade
Precise
ng!
Balanci
Fan
Ducted
ing!
Balanc
ead
Rotor H
ng!
Balanci
E-SKYBB00C200
48
Sky RC IMAX Blade Balancer....................£25.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
O.S. MAX 12XZ
The MAX-12XZ has been developed
to satisfy the power demand of all the
1/10 touring car enthusiasts from expert
to sportsman drivers. This is not a
superficial model change... most
of the major parts have been newly
designed for improved performance to
cope with the ever-evolving changes
in chassis design. A new material
has been used for the connecting rod
for increased durability and the
crankcase has been ‘beefed up’
for increased rigidity.
L-OS11670
O.S. MAX 12XZ.........................................£199.99
O.S. MAX 19XZ-B
Ever wanted fewer pit stops during
a race to extend your lead over your
competitor? The O.S. 19XZ-B Speed
offers 10% better fuel economy
over the current 21XZ-B Speed, but
with the 21J2 carburettor and 6mm
carburettor reducer it still has all
the performance you need to win.
The 19XZ-B Speed also has a DLC
(Diamond Like Coating) coated
crankshaft and ceramic bearings to
reduce rolling resistance.
L-OS11950
O.S. MAX 19XZ-B..................................... £349.99
O.S. MAX 21XZ-R VER II
The 21XZ-R Version II’s
aggressive timing puts explosive
acceleration and top-end speed
at your fingertips, while surprising
starting ease lets you unleash
its race-winning potential right
out of the box. The 21M carb is
unmatched for smooth, linear
acceleration, too. Performance
tuning options include a carb
restrictor as well as four
adjustable settings.
L-OS13875
O.S. MAX 21XZ-R Ver II............................£279.99
O.S. Speed 21XZ-R
Think of it as a 21XZ-R Version II on
performance-enhancers. It
offers the same fuel-stretching
time advantage, but even more
aggressive timing for added
horsepower and the fastest
lap times you've ever turned.
It wowed the crowd at the 1/8 Scale
On-Road Worlds in Miami, Florida,
when team drivers turned in 4th &
5th place finishes with production
models.
L-OS13880
O.S. Speed 21XZ-R.................................. £339.99
Distributed to all good model shops by:
Dimensions (mm):
A: 31.4
B: 11
C: 52.4
D: 39
E: 90.1
F: 34.9
G: 25.4
H: 29.4
J: 76.6
S: UNF 1/4-28
Displacement: 2.1cc (0.128cu.in.)
Power Output: 1.65PS @ 34,000rpm
Bore:
13.8mm (0.543in.)
Practical RPM: 5,000 ~ 40,000rpm
Stroke:
14mm (0.551in.)
Weight:
236g (8.33oz)
Dimensions (mm):
A: 37.0
B: 21.0
C: 64.5
D: 45
E: 101.8
F: 44
G: 31.6
H: 33.5
J: 86.2
S: UNF 1/4-28
Displacement: 3.1cc (0.19 cu.in.)
Power Output: 2.3PS @ 34,000rpm
Bore:
15.8mm (0.62in.)
Practical RPM: 4,000 ~ 40,000rpm
Stroke:
15.8mm (0.62in.)
Weight:
343g (12.1oz)
Dimensions (mm):
A: 37.0
B: 21.0
C: 65.6
D: 45
E: 102.4
F: 44
G: 31.6
H: 33.5
J: 86.8
S: UNF 1/4-28
Displacement: 3.49cc (0.212cu.in.)
Power Output: 2.75PS @ 33,000rpm
Bore:
16.27mm (0.640in.)
Practical RPM: 4,000 ~ 45,000rpm
Stroke:
16.8mm (0.661in.)
Weight:
343g (12.1oz)
Dimensions (mm):
A: 37.0
B: 21.0
C: 65.6
D: 45
E: 101.9
F: 44
G: 31.6
H: 33.5
J: 86.3
S: UNF 1/4-28
Displacement: 3.49cc (0.212 cu.in.)
Power Output: 2.8PS @ 33,000rpm
Bore:
16.27mm (0.640in.)
Practical RPM: 4,000 ~ 45,000rpm
Stroke:
16.8mm (0.661in.)
Weight:
338g (11.9oz)
See the full Ripmax range at www.ripmax.com
49
NEW ITEMS 2012
O.S Max 21XZ-M
Based on the .21XZ-R
performance at the 2011
IFMAR 1/8 scale On-Road
World Championships the .21XZ-M Inboard
Marine Engine takes that
race-winning technology
and applies it to
dominating .21-size boat
competition! Many of the
performance features found
on the .21XZ-R are here;
and by utilizing a water-cooled cylinder
head and big-bore carb, the .21XZ-M will
assert itself on the water with the same resounding success!
O.S. FS-62V
The second engine in a
completely new series
of four strokes aimed
squarely at the sport
and scale modeller. Styling is
deliberately 'retro' and in keeping
with the style of the very first OS
four strokes. Far better silencing
is given from the included new
F-4050, baffled, twin chamber
silencer with an O-ring
seal between the cast
sections and variable
length header pipe.
www.ripmax.com
Dimensions (mm):
A: 37
B: 21
C: 64.5
D: 45
E: 81.75
F: 44.5
G: 31.60
H: 33.5
J: 66.2
S: UNF 1/4 - 28
Displacement: 3.5cc (0.21cu.in.)
Power Output: 2.8PS @ 33,000rpm
Bore:
16.27mm (0.640”)
Practical RPM: 4,000 ~ 45,000rpm
Stroke:
16.8mm (0.661”)
Weight:
L-OS13951
O.S. MAX 21XZ-M......................................... £319.99
Dimensions (mm):
A: 44
B: 17.5
C: 102.8
D: 51
E: 105.1
F: 60
G: 34.1
H: 51.3
J: 87.5
S: UNF 5/16-24
Displacement: 10.11cc (0.617cu.in)
Power Output: 1.1PS @ 11,000rpm
Bore:
25mm (0.984”)
Practical RPM: 2,400 ~ 11,000rpm
Stroke:
20.6mm (0.81”)
Weight:
L-OS30600
O.S. GT33 PETROL
307.5g (10.85oz)
442g (15.59oz)
O.S. FS-62V w/F-4050 Silencer................. £229.99
The second engine in the latest O.S. GT series of petrol engines
is designed for the new class of models that are emerging onto
the market that are specifically targeted at this size and type
of engine. Many of these models are sleek in design, so O.S.
has chosen a rear mounted Walbro carburettor with reed valve
induction.
The advantage of spark ignition petrol engines over regular glow
engines is the optimised ignition timing across the rev range
that will not change as load goes on and
off. Like its bigger brother, the GT-55, the
GT-33 is a purpose designed model engine
and is not based on a modified industrial
unit. The GT-33 has been optimised in both
internal and external shape to provide class
leading power and torque in a
compact, light package.
E-5030 ‘Pitts’ style silencer
included for unobtrusive yet
effective silencing with minimal
power loss.
L-OS38300
50
O.S GT33 Petrol w/E-5030 Silencer.......... £369.99
Distributed to all good model shops by:
Displacement: 32.98cc (2.013cu.in.)
Power Output: 3.9PS @ 9,000rpm
Bore:
36mm (1.417”)
Practical RPM: 1,800 ~ 8,000rpm
Stroke:
32.4mm (1.276”)
Weight:
1230g (43.4oz)
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
O.S Speed 91HZ-R 3C
Dimensions (mm):
A: 52
B: 25
C: 98
D: 61
E: 102.7
F: 54.4
G: 43
H: 42.9
J: 81.2
S: UNF 5/16-24
When it comes to designing engines
expressly for the F3C competition,
OS is on a never ending quest to
produce the best engines in the
world, culminating in the new
Max 91HZ Ring. The 3C version
of the 91-HZ is designed
expressly for F3C competition
with controlled, precise manoeuvres
in mind so you can achieve faster
flight speeds and improved
hovering stability.
L-OS18641 O.S. Speed 91HZ-R 3C.... £394.99
O.S Speed 91HZ-R 3D w/Pipe
Displacement: 14.95cc (0.91cu.in.)
Power Output: 3.4PS @ 15,000rpm
Bore:
27.7mm (1.09in.)
Practical RPM: 2,000 ~ 16,500rpm
Stroke:
24.8mm (0.976in.)
Weight:
625g (22.05oz)
Dimensions (mm):
A: 52
B: 25
C: 98
D: 61
E: 102.7
F: 54.4
G: 43
H: 42.9
J: 81.2
S: UNF 5/16-24
O.S. is taking their new
91HZ-R to even higher levels
of performance thanks to
the new "on demand"
regulator system. Designed
specifically for this engine, the
system guarantees the steady fuel
supply needed for the mostdemanding of 3D flights
with constant, vigorous
attitude and
throttle
changes.
Displacement: 14.9cc (0.91cu.in.)
Power Output: 3.6PS @ 15,500rpm
Bore:
27.7mm (1.09”)
Practical RPM: 2,000 ~ 16,500rpm
Stroke:
24.8mm (0.98”)
Weight:
603g (21.2 oz)
The 91HZ-R also performs well as an F3C powerhouse providing
a steady, smooth run and exacting mixture controls.
L-OS18645
O.S. max 21xm ver ii outBOARD
Take down the competition with the
21XM Version II Outboard Marine
engine from O.S.! Designed
expressly for small and medium
sized outboard boats, it retains
many of the features found
on the successful 21XM,
including the 20J carburettor
and #8 glow plug.
New additions include efficient
air cooling, a larger muffler,
aluminium tilt transom
mounting plate,
outboard unit
with flexible
propeller
and blue
anodised
aluminium
heatsink
head.
T he
te
Comple
rd
Outboa
Unit!!
Distributed to all good model shops by:
O.S. Speed 91HZ-R 3D w/Pipe............................................... £499.99
Dimensions (mm):
A: 48.5
B: 37.5
C: 46
D: 25
E: 45
F: 46
J: 86
G: 87
K: 149.5
H: 219
L: 183
I: 34.5 S: UNF 5/16-24
Displacement: 3.5cc (0.21cu.in.)
Power Output: 1.3hp @ 25,000rpm
Bore:
16.6mm (0.654”)
Practical RPM: 3,000 ~ 25,000rpm
Stroke:
16mm (0.630”)
Weight:
L-OS13941
682g (24oz)
O.S. MAX 21XM Ver II Outboard............ £339.99
See the full Ripmax range at www.ripmax.com
51
NEW ITEMS 2012
O.S. MAX 105HZ
Dimensions (mm):
A: 52
B: 25
C: 82.6
D: 61
E: 105.2
F: 88.7
G: 43
H: 56.4
J: 79
S: UNF 5/16 - 24
The biggest helicopter engine that OS
have ever made delivers the levels of
torque and power demanded by top
fliers for both F3C and sport
applications. The 15%
increase in capacity offers
a big increase over the .91
class engines yet still fits
in mounts designed for
that class. Modification to the
cooling shroud is also unlikely.
The distinctive 'blue anodised'
cylinder head distinguishes
the 105HZ engines from
the 91HZ series yet
retains the HZ series styling overall.
Displacement: 17.17cc (1.048cu.in.)
Power Output: 3.7PS @ 15,000 rpm
Bore:
29.0mm (1.142in.)
Practical RPM: 2,000 ~ 16,500 rpm
Stroke:
26.0mm (1.024in.)
Weight:
L-OS18700
O.S. MAX 105HZ-R
596.2g (21.03oz)
O.S. MAX 105HZ...................................... £349.99
Dimensions (mm):
A: 52
B: 25
C: 82.6
D: 61
E: 105.2
F: 88.7
G: 43
H: 56.4
J: 79
S: UNF 5/16 - 24
The ultimate O.S. 3D helicopter
engine! Based on the standard
105HZ but with the addition
of the O.S. ‘DRS’ regulated
fuel system from a pressurised
fuel tank, this engine delivers
serious power in any attitude
and under any load demanded
by a ‘90’ size 3D heli. Porting
has been designed for
high torque rather than
ultimate horsepower.
Use the matching Powerboost 105 pipe it will release even
more power without heat build-up. Using 10% nitro fuel, it will
deliver the same power as the 91HZ-R 3D does on 30%!!
L-OS18750
www.ripmax.com
Displacement: 17.17cc (1.048cu.in.)
Power Output: 3.8PS @ 15,000 rpm
Bore:
29.0mm (1.142in.)
Practical RPM: 2,000 ~ 16,500 rpm
Stroke:
26.0mm (1.024in.)
Weight:
608g (21.46oz)
O.S. MAX 105HZ-R........................................ £399.99
O.S. MAX 105HZ-R W/Powerboost Pipe
Identical to the regular 105HZ-R technically but supplied
with the latest Powerboost 105 pipe. The pipe has been
purpose designed to suit the 105HZ-R and will provide high
power and torque across the RPM range without heat build
up caused by restriction of gas flow.
High Flow filler valve
The new Ripmax Hi-Flow Filler Valve has been
developed to meet the needs of those pilots
flying large models powered by glow, petrol or jet
engines, and enables safe and fast filling of even
the largest fuel tanks. Of self sealing design, the
Filler Valve is supplied complete with filling probe,
which is used whilst filling or emptying the tank,
this can be used with various types of tubing as
dictated by the fuel in use. For a high flow rate,
the Filler Valve’s bore is a generous 3.0mm
diameter.
As the materials
used in the Filler
Valve are resistant
to almost any
model fuel, the
valve can
even be
used with
smoke oil.
52
Distributed to all good model shops by:
L-OS18751
X-OS72146000
O.S. MAX 105HZ-R w/Powerboost Pipe......... £529.99
Powerboost Pipe 105....................................... £199.99
O.S. Glow Plug Type ‘RP8’ (Cold)
Racing glowplug for .21 class
on-road cars. Cold.
L-OS71642080
O.S. Glow Plug Type ‘RP8’ (Cold)......................... £8.75
Images show both sides
of the valve. Supplied
complete with probe and
additional probes are
available as spares.
L-RMX-FV
L-RMX-FVP
Hi-Flow Filler Valve Glo/Petrol/Jet.......£19.99
Hi-Flow Filler Valve Spare Probe...........£2.99
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
.25
.25-.32
Legendary O.S. quality and performance... but now in a brushless
electric motor! The range has been designed so that it is easy
to convert your IC model to electric without the guess-work, the
smallest motor is equivalent to a .25 class 2-stroke and the largest,
equivalent to a .90 class 4-stroke on a range of batteries from 3 to
8S.
This new range of brushless motors features a unique. O.S. designed cooling system, a strengthened centre body and large ball
bearings. Of course the propeller driver has been machined from
stainless steel for strength, accuracy and durability.
.40-.50
.70
Each motor is balanced during manufacture for optimum running and
reliability. Each is supplied with a rear mount and gold connectors as
standard accessories.
The World’s most innovative engine manufacturer for 75 years has
just become the new name in brushless motors.
O.S. Motor
Diameter Length Weight
(mm)
(mm)
(g)
KV
(kv)
Shaft
(mm)
Amps
(A)
Li-Po
(S)
Watts
(W)
OMA-3820-1200
37.5
43.3
155g
1200
6
30~40
3~4S
440
.55-.61
OMA-3825-750
37.5
48.3
190g
750
6
35~40
4~5S
590
.90
OMA-5020-490
50
52.5
350g
490
8
50~60
5~6S
1110
OMA-5025-375
50
57.5
405g
375
8
50~60
7~8S
1550
M-OS51011000
M-OS51012000
M-OS51013000
M-OS51014000
O.S. OMA-3820-1200 Brushless Motor.............................£54.99
O.S. OMA-3825-750 Brushless Motor...............................£54.99
O.S. OMA-5020-490 Brushless Motor...............................£84.99
O.S. OMA-5025-375 Brushless Motor...............................£94.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
53
NEW ITEMS 2012
www.ripmax.com
Dual Output !
Power Supply 13.8V 15A 200W Twin Output
This new ProPeak dual-output, 13.8v, 200W, power
supply is a high quality switch mode unit with a
particularly smooth output current, making it suitable
for use with almost all DC input chargers available
today, even those that are sensitive in voltage. Most
12v nominal input chargers, such as those in the
Ripmax range, are more than able to cope with the
13.8v DC output. The dual 4mm outputs allow easy
connection of two units such as chargers, tyre warmers
or battery warmers etc, to take advantage of the maximum
current of 15 Amps/200W supplied. The case is moulded
from tough plastic and therefore naturally insulated.
Dual
!
Output
1000W
!
Output
O-IP2001
O-IP2001/EUR
Power Supply 13.8V 15A 200W Twin Output..............£24.99
Power Supply 13.8V 15A 200W Twin Output Euro....£24.99
Power Supply 30A 415W Twin Output
The flexible, ProPeak dual-output,
13.8v, 415W power supply is a high
quality switch mode power supply with a
smooth output current, making it suitable
for use with almost all DC input chargers
on the market. The dual, 4mm outputs
also have screw-clamp outputs, allowing
flexibility in the way that external units like
chargers are connected. With a useful
30A and 415W of power output, this power
supply can be used as a stable source of
DC output that is suitable for chargers or
even testing smaller motors when the ESC
is direct connected. By having a stable
current, it is easier to understand motor
performance when varying propellers etc.
O-IP2003
O-IP2003/EUR
Power Supply 13.8V 15A 415W Twin Output..............£54.99
Power Supply 13.8V 15A 415W Twin Output Euro.....£54.99
Power Supply 12-30V 70A 1000W TWIN Output
This high power, ProPeak, dualoutput, power supply is a top quality
switch mode design that can deliver
an output between 12 - 30v DC and
up to 70A. Both the current and voltage
can be adjusted using the large red
LCD readout on the top. By precisely
controlling both, you can accurately define
exactly what is delivered to your charger or
ESC etc. That 1000W output will cater for
many motor/propeller combinations when
testing. The 4mm/clamp connectors make
‘hooking up’ the item to be powered an easy
operation and the dual outputs make it easier
to utilise that 1000W of power to the maximum.
O-IP2005
Power Supply 12-30V 70A 1000W Twin Output............. £174.99
O-IP2005/EUR Power Supply 12-30V 70A 1000W Twin Output Euro... £174.99
LCD
t!
Readou
54
Distributed to all good model shops by:
The New Range of
Power Supplies
from Ripmax!
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
TEMPO WATT METER
If you had to pick one tool that every electric flier should have, a
watt-meter would be it! The tempo allows you to fully analyse the
output and consumption of your setup, enabling you to fine tune
your aircraft for maximum power or duration. The Tempo is also
a stand-alone LiPo balancer, and included is a JST-XH balance
board, and deans extensions for the main power connection.
Input Power: 60V
Max Current: 100A
Min Voltage: 6.6V
Dimensions: 105 x 53 x 20mm
Weight: 120g
O-IPMM1
Pro-Peak Tempo 3in1 Meter/Balancer............................£24.99
All those familiar with the hugely popular
Sigma 2 charger will recognise the range
of features offered by Pro-Peak chargers.
This version, the Sigma EQ Hyper, offers
all of the programming features with
4 times the power for charging larger
batteries.
The Sigma EQ Hyper also includes a
built-in AC power supply for charging at
home. As an additional feature, there is a
direct DC output from the power supply
to power other DC chargers.
tts,
200 Wa sing +
a
Metal C apability =
C
AC/DC
yper!
H
Q
E
Sigma
Power Output: 200W
LiPo/Li-Ion Charge: 1-6 Cells
NiCD/NiMH: 1-18 Cells
Pb (Lead-Acid): 2-24V
Charge Current: 0.1-10A
Discharge Current: 0.1-5A
O-IP3090
O-IP3090/EUR
Sigma EQ Hyper AC/DC Charger....................................£99.99
Charger.................................. £109.99
Sigma EQ Hyper AC/DC Charger Euro...........................£99.99
Euro......................... £109.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
55
NEW ITEMS 2012
www.ripmax.com
Designed with the serious indoor flying
enthusiast in mind, the HEX is capable of
charging six 1S Li-Po packs at the same
time and fully independently. Four sockets
have a 300mA charge rate and two a 600mA charge Charge 6
rate. The sockets accept both the small E-Flite and
batteries
Nine Eagles packs as standard (adaptor leads
available). Input power can be from 7.5 - 18v
independently
DC making it compatible with a wide range of
at once!
batteries and power supplies.
O-IP3015
HEX 6 x 1S Li-Po DC Charger.......................................... £16.99
This adaptor fits the Hex
charger above, to charge
mCP x batteries, and other
1S batteries with this
connector.
This adaptor fits the Hex
charger above, for 1S
batteries fitted with a red
“BEC” connector, such as
those in the Axion range.
O-IPBAL-HXL1 Adaptor Lead for HEX - MCPX................£1.99
O-IPBAL-HXL2 Adaptor Lead for HEX - RED JST.................£1.99
O-IT1S1P016025A1
O-IT1S1P016025A1
O-IT1S1P055025A
Expanding on the well-established, Intellect indoor Li-po range, these new 1S packs
extend to cover both Nine Eagles micro model types with the 160mAh cell, the Nine Eagles
Solo Pro 328 and E-Flite Blade 120SR with the 550mAh cell and the E-Flite Blade mCPx
with the 250mAh cell. All deliver real 25C current to maintain on-load voltage and therefore
performance. A real power upgrade for your indoor models!!
O-IT1S1P016025A1
O-IT1S1P016025A2
O-IT1S1P025025A
O-IT1S1P055025A
Intellect 1S 160mAh 25C Li-Po(2pcs)N1............................................ £7.99
Intellect 1S 160mAh 25C Li-Po(2pcs)N2............................................ £7.99
Intellect 1S 250mAh 25C Li-Po (2pcs)...............................................£8.50
Intellect 1S 550mAh 25C Li-Po...........................................................£4.99
Part Number
Compatible with
O-IT1S1P016025A1
O-IT1S1P016025A2
O-IT1S1P025025A
O-IT1S1P055025A
Nine Eagles Aero
Nine Eagles Heli
E-Flite mCP-X
E-Flite 120SR & Solo Pro 328
Battery
Type
Voltage
Li-Po
Li-Po
Li-Po
Li-Po
3.7v
3.7v
3.7v
3.7v
SkyRC I-METER
The I-meter from SkyRC is a
multi-function measurement tool that
combines a wattmeter, battery
checker, temperature
gauge, tachometer,
servo tester and
much more into
one compact device.
With all of these
features packed in at a
spectacular price, it is a
tool that no modeller should
be without!
O-SKYIM
56
SkyRC I-Meter............................................£44.99
Distributed to all good model shops by:
Capacity
160mAh
160mAh
250mAh
550mAh
O-IT1S1P055025A
Max. Cont.
Discharge
A
25C
25C
25C
25C
46
46
43
57
Size (mm)
B
C
12
12
19
19
7
7
7
6
Weight
(gms)
Price
5g
5g
8g
14g
£7.99
£7.99
£8.50
£4.99
XT60 Connector
A slimmer alternative to the
'Deans' type contemporary,
the XT60 Connector
provides secure connections
and no chance of incorrect
polarity connection thanks to
the design. Available in packs
of 2 or 10 pairs.
d
Gold Plate
s!
Connec tor
O-RAX/02
O-RAX/10
XT60 Connector (2 Pairs)............................. £2.99
XT60 Connector (10 Pairs)......................... £13.99
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
ies
Batter
4
e
g
r
a
Ch
ly!
aneous
t
l
u
m
i
S
Four B6+ chargers all built into one compact case,
now mains AC or 12-18v DC input for even greater
capability! Each charger has its own display
screen and programming buttons for complete,
independent control as well as its own
balance port for Lithium type battery
balancing and one balance board
for XP and TP plugs is supplied
(others are available as
options). Two of the chargers
have a temperature sensor
socket which also doubles as
a PC interface socket when
option sensors and cables are
used.
AC or
ut
DC Inp
lity!
Capabi
O-SKYCHB6QAC
SkyRC IMAX Quattro B6 AC Charger.................... £189.99
The Quattro is built into a sturdy
aluminium case with extensive cooling
fins and fan to handle the 50W charge
per charger that it can handle. That's a
total of 200W! Perfect for the modeller
who is in need of charging batteries of
different types simultaneously.
Specifications
AC Input:
100- 240v
Charge Current:
0.1 - 6.0A
DC Input:
11 - 18v
NiMH Cell Count:
1 - 15
Max Power:
50W x 4
LiPo Cell Count:
1-6
Max Discharge:
5W x 4
PB Battery Voltage:
2 - 20V
GT POWER LIGHTING SETS
These light sets will add a level of scale realism to your models
and are extremely easy to install. Using long life, super-bright
(3 & 5mm diameter) LEDs, you won’t fail to see any model
they’re installed in! All LEDs or LED combinations have
separate plugs fitted, so can be moved around for different
lighting effects!
CARS
Set 1 is for aircraft and helicopters and features beacon, navigation and
strobe lighting. Set contents: Main Control Board, 2 x White LEDs,
1 x Green LED, 1 x Red LED, 2 x White Strobe LEDs, 2 x Slow Flashing
Red LEDs and Mounting Kit.
Set 2 is for cars and features headlights, tail lights, steering signals
and brake lights, all controlled from your transmitter! Set contents: Main
Control Board, 2 x Y-Lead, 2 x White LEDs, 2 x Red LEDs, 2 x Orange
LEDs and Mounting Kit.
Set 3 is for cars and features 4 setting options; always on or one of three
combination flashing sequences to mimic pace cars, low riders, monster
trucks - the only limit is your imagination! LEDs can be switched around
as required to suit different applications. Switch operated. Set contents:
Main Control Board, 6 x White LEDs, 2 x Blue LEDs, 2 x Red LEDs, 2 x
Yellow LEDs, 1 x Y-lead, 1 x Mode Selection Switch and Mounting Kit.
AIRCRAFT
Input Voltage for all sets: 4.8~6V (Recommend 6V for maximum
brightness). This can be from your receiver or a separate power source.
h of realism
Adds an extra touc
odel!
and drama to y0ur m
C-GTLSC1
C-GTLSC2
C-GTLSC3
F-GTLSA1
GT Power Car Lighting Set - Scale.............. £11.99
GT Power Car Lighting Set - Flashing........ £13.99
GT Power Car Lighting Set - Wheels............ £5.99
GT Power Aircraft Lighting System............ £10.99
Distributed to all good model shops by:
HELICOPTERS
See the full Ripmax range at www.ripmax.com
57
NEW ITEMS 2012
www.ripmax.com
Ripmax HI-ENERGY LI-PO BATTERIES
A range of the most popular Li-Po packs designed to offer great value for money yet still deliver good performance for most
sports applications. All the cells in a pack are carefully chosen to match the impedance and therefore discharge evenly. This
ensures that the pack stays in reasonable balance during discharge. If the cells are at the same voltage after discharge it then
makes the re-charge faster and extends pack life. Cell connection is by ultrasonic welding with lead-free soldered power cables.
The main power leads fitted to each pack are suited to the maximum discharge current that the pack is capable of and are
conveniently pre-fitted with a ‘T’ type connector. This style of connector is used by many aircraft, helicopter car and boat
manufacturers as standard these days such as ST Model, DHK etc. The balance lead is the XH type, which is matched to all the
Ripmax chargers and many others.
Part Number
Pack Type
O-HE2S1P130025A
O-HE2S1P220025A
O-HE2S1P320025A
O-HE2S1P400040C
O-HE2S1P500040C
O-HE3S1P130025A
O-HE3S1P220025A
O-HELPCF01
O-HE3S1P320025A
O-HE3S1P400040C
O-HE3S1P500040C
O-HE4S1P220025A
O-HE4S1P320025A
O-HE5S1P320025A
O-HE6S1P220025A
O-HE6S1P320025A
Standard
Standard
Standard
Hard Case Car
Hard Case Car
Standard
Standard
Standard
Standard
Hard Case Car
Hard Case Car
Standard
Standard
Standard
Standard
Standard
Battery
Type
Configuration Voltage
Li-Po
Li-Po
Li-Po
Li-Po
Li-Po
Li-Po
Li-Po
Li-Po
Li-Po
Li-Po
Li-Po
Li-Po
Li-Po
Li-Po
Li-Po
Li-Po
2S1P
2S1P
2S1P
2S1P
2S1P
3S1P
3S1P
3S1P
3S1P
3S1P
3S1P
4S1P
4S1P
5S1P
6S1P
6S1P
7.4v
7.4v
7.4v
7.4v
7.4v
11.1v
11.1v
11.1v
11.1v
11.1v
11.1v
14.8v
14.8v
18.5v
22.2v
22.2v
Capacity
Max. Cont.
Discharge
L
25C
25C
25C
40C
40C
25C
25C
25C
25C
40C
40C
25C
25C
25C
25C
25C
85
104
130
138
138
85
102
102
130
138
138
102
132
130
102
130
1300mAh
2200mAh
3200mAh
4000mAh
5000mAh
1300mAh
2200mAh
2200mAh
3200mAh
4000mAh
5000mAh
2200mAh
3200mAh
3200mAh
2200mAh
3200mAh
Size (mm)
W
H
30
34
42
46
46
30
34
34
42
46
46
35
42
42
35
42
12
12
14
24
24
20
20
20
22
37
37
28
26
35
40
40
Weight
Price
70g
114g
180g
245g
283g
101g
161g
161g
250g
360g
418g
205g
345g
409g
301g
481g
£11.99
£15.99
£34.99
£44.99
£54.99
£15.99
£19.99
£19.99
£39.99
£64.99
£74.99
£27.99
£54.99
£69.99
£44.99
£84.99
Battery Checker/BALANCER UNIVERSAL
The new Futaba BR-3000 Battery Checker is a sophisticated unit that can
be used to check a wide range of battery packs of varying voltages, with
Li-Po, Li-Fe and Li-Ion packs of 2-7 cells, and Ni-MH and Ni-Cd packs of
4-7 cells all being suitable for checking. Information such as total pack
voltage and remaining capacity are available for all packs, whilst those
using Lithium technology can also be checked for individual cell voltage,
minimum and maximum cell voltage and cell voltage differences, as well
as being able to take advantage of the included balance function.
P-BR-3000
58
Easy
to
use!
Battery Checker/Balancer Universal......................................................£34.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
50 Watt
Power!
SkyRC IMAX e6650 AC/DC Charger
A high performance charger, discharger and balancer
that features 10 to 18V DC or 100 - 240V mains AC
inputs and an impressive output of up to 6.0 Amps.
With a maximum 50W charge power, it is suitable
for Ni-Cd, Ni-MH and Lead Acid batteries,
together with the full range of Li-Po, Li-Fe and
Li-Ion batteries. Its compact dimensions
mean it’s practical to use at the field as
well as at home. Supplied complete with
mains and 12v input leads, port for
optional temperature sensor, balance
ports for 2-6 cell batteries.
O-SKYCHE6650 IMAXC e6650 AC/DC Charger.................£54.99
SkyRC IMAX e6680 AC/DC Charger
If you fancy all the features of the e6650 above,
yet require 30% higher power, look no further.
SkyRC have given the e6680 an astouding 80
Watts of power - for under £60 - making it
perfect for the those requiring even more
power on a budget!
s of
80 Watt r
o
Power f 0!
6
under £
O-SKYCHE6680 SkyRC IMAXC e6680 AC/DC Charger........................... £59.99
ance!
High Perfor m
High Power!
Pr ices!
Incredibly Low
Part Number
P-NEWXLD06
P-NEWXLD09
P-NEWXLD25HB
P-NEWXLD25HMB
P-NEWXL36
P-NEWXL37HB
P-NEWXLD37HB
P-NEWXL38HMB
P-NEWXLD38HMB
P-NEWXLD45HMB
P-NEWXLD100HMB
Type
Speed
(4.8v)
Speed
(6v)
Torque
(4.8v)
Torque
(6v)
Dimensions (mm)
A
B
C
Digital
Digital
Digital
Digital
Standard
Standard
Digital
Standard
Digital
Digital
Digital
0.12s
0.08s
0.065s
0.11s
0.16s
0.16s
0.16s
0.16s
0.16s
0.16s
0.18s
0.10s
0.06s
0.045s
0.09s
0.14s
0.14s
0.14s
0.14s
0.14s
0.14s
0.16s
0.55kg
1.3kg
2.2kg
3.4kg
3.5kg
6.0kg
6.0kg
9.0kg
9.0kg
14.0kg
17.0kg
0.65kg
1.5kg
2.5kg
3.8kg
4.0kg
7.0kg
7.0kg
11.0kg
11.0kg
15.0kg
20.0kg
23
23.2
35.5
35.5
40.3
39.9
39.9
39.9
39.9
39.9
58.8
Distributed to all good model shops by:
12.2
12
15
15
19.8
19.8
19.8
19.8
19.8
19.8
28.7
24
24.8
28.6
28.6
38.6
47
47
47
47
47
54.5
Weight
(gms)
Price
6g
9g
25g
32g
36g
37g
37g
42g
42g
50g
120g
£6.99
£6.99
£21.99
£24.99
£5.99
£8.99
£11.99
£12.99
£15.99
£17.99
£26.99
See the full Ripmax range at www.ripmax.com
59
NEW ITEMS 2012
www.ripmax.com
The new and innovative Futaba 8FG is the perfect radio for
those sport pilots looking to take the next step forward in their
flying, as it offers full 8 channel FASST 2.4Ghz performance,
allied to trend setting new styling and fast and ultra simple
programming with its unique touch sensor input.
• Big, 128 x 64 LCD with backlighting,
adjustable contrast & auto-off.
• Touch sensor programming.
• 20-model memory (expandable with
optional SD card).
• Ten character user name.
• Ten character model name.
• Basic and Advanced menus.
• Enhanced aircraft, heli & glider software.
• Mode 1-4 selectable (Modes 3 and 4
programmable).
• Assignable functions/switches.
• 2 proportional sliders.
• Digital trims on all 4 main channels.
• Fail-safe, servo reversing and EPA.
• Aircraft and heli gyro mixes.
P-FP8FGS/2-4G 14ch S3001x4 2.4GHz (N-Tx) R6208SB........................ £499.99
P-T8FGS2-4G
14ch MM Transmitter 2.4GHz (N-Tx)............................ £329.99
Futaba t6J
This brand new 6 channel system from Futaba is probably one of
the most significant new radios for some time, incorporating as it
does both FHSS and S-FHSS transmission modes, which allows
the use of a wide and ever expanding range of receivers, including
the new micro R2005GF unit. Supplied as standard as a dry
battery combo together with the matching R2006GS six channel
receiver, the transmitter can also be fitted with individual AA
rechargeable cells or 4/5 cell battery packs. Packed with features
normally only seen on much more expensive systems, these
include 15 model memories, large 127 segment LCD screen,
both aircraft and helicopter mixing functions, etc, etc, as well as
a rotary auxiliary control, something that is lacking in most of its
competitors. To improve still further the ease of programming the
6JG is provided with 3 buttons and 1 edit key, thus avoiding the
endless scrolling through screens more basic systems require.
• 15 Model Memory.
• Throttle Cut.
• Model Type.
• Data Reset.
• Timer.
• Reverse on all functions.
• Sub Trim on all functions.
• Trainer function.
• Dual rates & Exponential.
• End Point Adjustment on all functions.
• Failsafe (all channels S-FHSS/ch3 FHSS).
P-CB6JG2-4G/L
P-CB6JG2-4G/R
60
6ch Combo 2.4G FHSS (D) M2 R2006GS....................... £149.99
6ch Combo 2.4G FHSS (D) M1 R2006GS....................... £149.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
Due for release in Spring 2012, the new Futaba 8J is the perfect radio for
Futaba’s new R2008SB
the keen pilot, and for those moving up from a 4 or 6 channel system. Easy
receiver
has been developed
to programme using the jog dial and input keys, the 8J comes packed with
alongside the 8J (+ S-Bus)
advanced mixing and control functionality, the software being intuitive
and is ideal for more advanced
and easy to navigate making programming a pleasure. With no less than
models where more than 6
20 model memories and 10 character user and model names, the 8J
channels are required.
offers great flexibility, an example being the auxiliary channels switch/
VR operator selection option. Supplied complete with rechargeable
transmitter
and
the combo
also includes
the the
Immerse yourself
in abattery
product
socharger,
revolutionary
that it package
has the potential
to change
newsystems
full range
which
S-Bus legacy
enabledwith
as an
well18-channel
as
way 2.4GHz
areR2008SB
designed.receiver,
Combining
theisFutaba
conventional
outputs,
of course
the existing
R2006GS
system is offering
probably8 more
than enough
to make
long-time
fliers want
to buy and
one. However,
R2106GF
receivers
can also
be used
with the
8J transmitter.
the 18MZmicro
also offers
the latest
and best
chapter
in Futaba’s
2.4GHz
developments: new
FASSTest (Expanded System Telemetry) technology, whilst also being able to operate
20 Model
Memory.
on FASST• and
S-FHSS
transmission systems (Including the forthcoming Ripmax Futaba
• Rechargeable Tx Battery and Charger.
• Large 128 x 64 dot LCD w/LED Backlight.
Transmitter
Ready)models).
• Two Circuit Timer.
• FHSS/S-FHSS Transmission Modes.
• Advanced Inbuilt Aircraft/Heli Mixing.
• Six Programmable Mixers.
Powered by a 7.4V, 3500mAh Li-Po transmitter battery, the 18MZ is the first true
18-channel Futaba radio system ever. It comes with an R7000SB telemetry enabled
receiver, a high-voltage design that operates up to 8 channels using the 8 standard
PWM outputs or up to 18 channels (16 proportional + 2 digital) through the 18MZ’s two
S-Bus2 ports. That means a simpler setup and full support for S-Bus and S-Bus2 servos.
As supplied the R7008SB receiver includes integral sensors for receiver voltage, signal
strength and external voltage, with further separate sensors due to be available soon.
Slide a card in the inbuilt SD slot and you have ample capacity for unlimited updates,
model memories and sound/picture files. The 18MZ also has a built-in 0.3M megapixel
camera eliminating the need for a digital camera or mobile phone. The transmitter
includes a big, brilliant and backlit 6” touch screen with 640x240 resolution which
provides sparkling clarity on remarkably little power.
The in-built S-Bus programming system allows the 18MZ to be used whilst setting up a
model with S-Bus servos thus simplifying setups.
The functions outlined here are just the tip of the iceberg - making the Futaba 18MZ a
must have for any serious pilot!
P-CB8J/L
P-CB8J/R
8ch Combo 2.4GHz M2 R2008SB.................................... £279.99
8ch Combo 2.4GHz M1 R2008SB.................................... £279.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
61
NEW ITEMS 2012
www.ripmax.com
The most advanced R/C transmitter ever made!
62
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
Immerse yourself in a product so revolutionary that it has the potential to change the
way 2.4GHz systems are designed. Combining the Futaba legacy with an 18-channel
system is probably more than enough to make long-time fliers want to buy one. However,
the 18MZ also offers the latest and best chapter in Futaba’s 2.4GHz developments: new
FASSTest (Expanded System Telemetry) technology, whilst also being able to operate on
FASST and S-FHSS transmission systems (including the forthcoming Futaba Transmitter
Ready models).
Powered by a 7.4V, 3500mAh Li-Po transmitter battery, the 18MZ is the first true
18-channel Futaba radio system ever. It comes with an R7000SB telemetry enabled
receiver, a high-voltage design that operates up to 8 channels using the 8 standard PWM
outputs or up to 18 channels (16 proportional + 2 digital) through the 18MZ’s S-Bus port.
That means a simpler setup and full support for S-Bus and S-Bus2 servos. As supplied
the R7008SB receiver includes integral sensors for receiver voltage, signal strength and
external voltage, with further separate sensors due to be available soon (see page 65).
Slide a card in the inbuilt SD slot and you have ample capacity for unlimited updates,
model memories and sound/picture files. The 18MZ also has a built-in 0.3M megapixel
camera eliminating the need for a digital camera or mobile phone. The transmitter
includes a big, brilliant and backlit 6” touch screen with 640x240 resolution which
provides sparkling clarity on remarkably little power.
The in-built S-Bus programming system allows the 18MZ to be used whilst setting up a
model with S-Bus servos thus simplifying setups.
The functions outlined here are just the tip of the iceberg - making the Futaba 18MZ a
must have for any serious pilot!
Brief System Overview:
• S-FHSS/FASST/FASSTest Transmission Modes.
• Inbuilt Telemetry System.
• 18 Channels.
• Dedicated 2.4GHz Transmitter.
• Extended Operating Time of at Least 6 Hours.
• Unlimited Model Memories (Using Optional SD Card/s).
• S-Bus Servo Programming System.
• HVGA Soft-Touch Screen with LED Backlighting.
• Integral Camera.
• Visual and Audible Telemetry Outputs.
• FTR Compatible.
P-CB18MZ/L
P-CB18MZ/R
Supplied with
FASSTest technology
R7000SB receiver.
18ch Combo 2.4GHz M2 R7008SB...........................................................£2,499.99
18ch Combo 2.4GHz M1 R7008SB...........................................................£2,499.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
63
NEW ITEMS 2012
www.ripmax.com
Futaba High Voltage Servos
s3051hv SERVO
A competitively
priced high
voltage digital
servo offering
good speed
and torque
figures, with
3-pole motor
for general
applications.
S9352HV SERVO
Developed specifically
for high performance
EP and GP car use
and offering a
huge 22.0Kg.cm
torque allied to
an amazingly fast
transit speed of
only 0.06 sec for 60
degree travel, as well
as utilising a metal centre case.
S9353HV SERVO
Possibly one of the ultimate
car servos, similar to
the S9352HV but
with additional
features like a
full aluminium
case for maximum
strength as well as
greatly improved heat
dissipation, making it perfect for high stress
applications in vehicles such as rock crawlers.
Torque:
Speed:
Dimensions:
Weight:
Torque:
Speed:
Dimensions:
Weight:
Torque:
Speed:
Dimensions:
Weight:
10.5Kg.cm (7.4V)
0.16 sec/60 deg (7.4V)
40 x 20 x 38mm
48g
19.6Kg/cm (7.4V)
0.07 sec/60 deg (7.4V)
40.5 x 21 x 37.4mm
72g
19.6Kg.cm (7.4V)
0.06 sec/60 deg (7.4V)
40.5 x 21 x 37mm
77g
SBL256HV SERVO
For helicopter pilots that want only
the best, the new BLS256HV
tail servo really is the only
choice, combining torque
of 5.0Kg.cm with
a breathtaking
transit speed
of only 0.05 sec.
60deg. For GY520/
601/611/701/750
gyros only.
SBL171SBHV SERVO
Intended for use in aircraft,
either electric or I/C powered,
the new BLS171SBHV
servos offers a great
specification
alongside the
options of high
voltage operation
and/or usage with
Futaba’s S-Bus
system.
SBL172SBHV SERVO
The new flagship in the
extensive range of
Futaba servos,
the powerful
BLS172SBHV
servo has
been developed
for the large and
powerful models
that are becoming
more popular.
Torque:
Speed:
Dimensions:
Weight:
Torque:
Speed:
Dimensions:
Weight:
Torque:
Speed:
Dimensions:
Weight:
5.0Kg.cm (7.4V)
0.05 sec/60 deg (7.4V)
40 x 20 x 36.8mm
61g
11.8Kg.cm (7.4V)
0.10 sec/60 deg (7.4V)
40 x 20 x 34.8mm
48g
37Kg.cm (7.4V)
0.11 sec/60 deg (7.4V)
40.5 x 21 x 38.4mm
74g
SBL174SBHV SERVO
This low profile servo is designed for aileron
use, where its unusual shape
makes installation into a
thin wing simple. With a
super fast speed
and high
torque,
this servo
is suitable for
even larger
size aircraft.
SBL175sBHV SERVO
This high performance
servo is developed for
general aircraft,
and combines a
speed of 0.12
sec for 60 deg.
travel and 21Kg
of torque, making
it a very useful
servo for a wide
range of models.
SBL272SBHV SERVO
Helicopter pilots will certainly
find this new servo of great
interest as this servo has
been produced to
precisely match
their needs,
whether this
be for a mid or
large size heli,
both electric or I/C
powered.
Torque:
Speed:
Dimensions:
Weight:
Torque:
Speed:
Dimensions:
Weight:
Torque:
Speed:
Dimensions:
Weight:
9.6Kg.cm (7.4V)
0.09 sec/60 deg (7.4V)
47.5 x 27 x 25.4mm
53g
21Kg.cm (7.4V)
0.12 sec/60 deg (7.4V)
40 x 20 x 36.8mm
66g
12Kg.cm (7.4V)
0.08 sec/60 deg (7.4V)
40 x 20 x 36.8mm
60g
P-S3051HV
Servo HV Digital - 0.16s/10.5Kg...................................................£39.99
P-S9352HV
Servo HV 0.06s/22.6Kg...............................................................£119.99
P-S9353HV
Servo High Voltage Metal U/Case-0.06s/22.6Kg......................£179.99
P-SBL256HV
Servo High Voltage Heli Brushless - 0.05s/5.0Kg...................£129.99
P-SBL171SBHV
Servo High Voltage Brushless S-Bus 0.13s/10.5Kg.................£109.99
P-SBL172SBHV
Servo High Voltage Brushless S-Bus 0.11s/37.0Kg.................£149.99
P-SBL174SBHV
Servo High Voltage Brushless S-Bus 0.11s/8.8Kg..................£109.99
P-SBL175SBHV
Servo High Voltage Brushless S-Bus 0.12s/21.0Kg.................£119.99
P-SBL272SBHV
Servo High Voltage Brushless S-Bus 0.08s/12.0Kg................£119.99
64
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
Futaba FASSTEST TELEMETRY
The new Futaba 18MZ radio incorporates telemetry as
standard when used with the R7008SB receiver, offering
on-board radio voltage, external voltage and signal strength
data, however for those pilots needing even more information
Futaba have developed additional telemetry sensors that
connect to the R7008SB receiver.
Temperature sensor with a range from -20 to +200°C.
P-SBS/01T
FASSTest Telemetry Temp Sensor...............£59.99
Magnetic RPM sensor with a range from 360 to 50,000 RPM.
P-SBS01RO
FASSTest Telemetry Optical RPM Sensor...£39.99
Optical RPM sensor with a range from 360 to 300,000 RPM
(relative to no. of blades – 180,000 RPM with 2 blades)
P-SBS/01RM FASSTest Telemetry Magnet RPM Sensor...£39.99
Altitude/Variometer sensor (0 to 5,000 metre altitude and +
150 m/S Vario range)
P-SBS/01A
FASSTest Telemetry Air Pressure Sensor...£49.99
Servo Std S-BUS/PWM 0.14S/30.6KG
The most powerful S-Bus programmable
servo available! The new S9075SB servo
is exceptionally powerful - offering over
30 kg/cm torque - so is perfect for the
most demanding applications.
Weight:
71g
Dimensions:41 x 21 x 37mm
Speed: 0.14 sec/60° (6.0v)
Torque:
30.6kg/cm (6.0v)
P-S9075SB
Servo Std S-Bus/PWM - 0.14s/30.6Kg........ £129.99
R2106GF 6CH RX MICRO 2.4GHz FHSS (Air)
This new 6 channel receiver is perfect for all type of park fly
models, both fixed wing and helicopters. Weighing only 4
grams and with extremely compact dimensions
this new FHSS receiver is already
very popular!
Range:
300mm
Dimensions:38 x 21 x 10mm
Weight:
4g
Voltage:
4.8 - 7.4V
Frequency: 2.4GHz FHSS
Channels: 6 Channels
TX MODULE 2.4ghz S-fhss 7/8/9/10c
This new Futaba S-FHSS
module has been developed for
use with a wide range of modular
transmitters, ranging from the
original FF7 through the FF8, 9C
and 10C systems, enabling these
transmitters to operate Futaba's
new S-FHSS low cost receivers and the brand new FTR
series of aircraft and helicopters.
P-FTM/FH
PS-10 RECEIVER POWER REGULATOR (10A)
Perfect for those wanting to
take advantage of the light
weight and high capacities
of the latest Li-Po and Li-Fe
battery packs, but running
4.8-6.0v receivers and servos,
the new PS-10 voltage regulator
from Futaba converts input voltages
from 6.0v to 12.6v to a constant 5.2v
output to the receiver/servos, with
a maximum continuous current of
7.0Amps and peak of 13.0Amps. A bonus is the increase in
receiver/servo reliability due to the non varying nature of the
output voltage, eliminating the high initial peak voltage of a
freshly charged battery.
P-RPS-10
Primarily developed for helicopter
usage but equally suitable for fixed
wing models, this tiny new mid range
FASST receiver weighs only 6.3g,
but in S-Bus mode it offers 18
channel output! (3 channels
in PWM mode) an is
designed for small to
medium sized models.
Wingspan: 6.3g
Channels: 3 (PWM)/18 (S-BUS)
Dimensions:22.5 x 37.4 x 9.3mm
P-R6203SBE/2-4G 3/18ch Rx (S-Bus/Mid Range) 2.4GHz. £59.99
SBE-1 S-BUS ADAPTER GY750
The new SBE-1 S-Bus Encoder is
designed to interface between a receiver
with standard outputs and the GY-750,
converting the normal receiver output to
the digital input stream required by the
gyro, thus enabling standard Futaba and
other manufacturer's receivers to be used.
S-BUS rx/gyro link lead
A standard link lead suitable for
many applications and especially
suited for S-Bus connection.
S-Bus Rx/Gyro Link Lead.........................£2.99
Distributed to all good model shops by:
Receiver Power Regulator (10 Amps)......... £64.99
R6203SBE/2-4G 3/18CH RX (S-BUs)
P-R2106GF/2-4G 6ch Rx Micro 2.4GHz FHSS (Air)......... £29.99
P-SBC-LEAD
Tx Module 2.4GHz S-FHSS 7/8/9/10C..........£79.99
P-SBE-1
S-Bus Adapter GY750............................... £49.99
See the full Ripmax range at www.ripmax.com
65
NEW ITEMS 2012
www.ripmax.com
A great set of useful tools for any modeller. This set Includes:
• Consisting of 10pc 25mm bit assortment PH1, 2, 3. Slot 4, 6, 7mm,
Star T10, T15, T20 & adaptor
• Magnetic tip screwdriver bit handle
• Mini long nose pliers, mini side cutting pliers, tweezers
• 4 sockets 1/4” drive 7, 8, 9, 10mm, 75mm extension bar
• 6 precision screwdrivers 4 Slot & 2 Crosspoint
T-RO-36039
26Pc Mini Trifold Tool Kit............................................................................................................£6.99
Long blades for reaching recessed screws
in electronic equipment.
• Slotted 2.4 x 75, 3.0 x
100, 4.0 x 150mm
• Crosspoint PH00 x 7.5,
PH0 x 100, PH0 x 150mm
• Manufactured with selected
steel Handles and precision
ground tips
• Includes slotted 0.9, 1.2,
1.4, 1.8, 2.4, 3.0mm, PH00,
0, 1, awl and a pin punch.
T-RO-28249
T-RO-28219
11pc Precision Screwdriver Set w/Tweezers...........£2.99 6pc Long Precision Screwdriver Set........................£3.99
Drop forged and chrome
plated frame Wooden handle.
Used for cutting intricate
shapes and its blade can
be turned through 360° for
increased flexibility.
An indispensable aid for model
makers, DIYers or professionals.
With adjustable joints for versatile
adjustment in all directions.
Complete with 60mm glass
magnifying lens.
T-RO-60335
T-RO-58289
HD Helping Hands with 60mm Magnifier.................£5.99 Coping Saw w/5 Blades - 165mm..............................£6.50
A pair of compass cutters
designed for cutting circles in
rubber, gasket material, leather,
paper and vinyl. Simply unscrew
to a radius position and secure
the cutters can create circles
from 10 - 150mm in diameter.
T-RO-62949
Compass Cutter w/6 x Spare Blades........................£3.50
Protects desk, table and bench top surfaces. Non slip
surface remains smooth for hundreds of cuts and helps to
preserve the life of knife blades. Available in 3 handy sizes.
T-RO-60809
T-RO-60807
T-RO-60804
A2 Cutting Mat - 450 x 600mm.................................................................................................. £12.99
A3 Cutting Mat - 450 x 300mm....................................................................................................£6.99
A4 Cutting Mat - 300 x 200mm....................................................................................................£3.99
Quality stainless steel rule graduated in cm/mm on the upper edge and
1/64”, 1/32”, 1/16” and 1/8” on the lower edge. Complete
with conversion scales on reverse
showing in-mm, WW-UNF, and tap
drill sizes.
T-RO-50824
T-RO-50826
Great value drop
forged pliers, and
double dipped soft
handles for added
comfort.
T-RO-20214
T-RO-20211
T-RO-20210
T-RO-20215
66
Stainless Steel Ruler - 300mm...................................................................................................£2.50
Stainless Steel Ruler - 600mm...................................................................................................£4.99
20214
Combination
20210
Long Nose
20211
Needle Nose
20215
Side Cutters
Mini Combination Pliers.............................................................................................................. £1.99
Mini Needle Nose Pliers.............................................................................................................. £1.99
Mini Long Nose Pliers................................................................................................................. £1.99
Mini Side Cutting Pliers............................................................................................................... £1.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
NEW ITEMS 2012
www.ripmax.com
y
Speciall
d
e
h
Finis
x!
Self-Mi
Aero T ch Epoxy 50ml
Specially formulated epoxy for
bonding composite mouldings. Nondrip. Use with Aero T ch dispenser
gun and mixing nozzle. Forms
high strength joints and fillets.
Gels in 3-4 hours and
sets in 24 hours.
Aero T ch Epoxy 25ml
Specially formulated for bonding composite
mouldings. Its non-drip formulation forms
visible joints and fillets for increased joint
strength. Supplied in a self-mix syringe that
dispenses resin and hardener in equal
amounts that need to be thoroughly
mixed. No auto-mix nozzle required.
Gels in 3-4 hours and sets in 24 hours.
S-SE56
Aero Tech 25ml Epoxy................ £7.99
Perfect Plastic Putty
S-SE55
Aero Tech 50ml Epoxy.................................... £14.50
Special dispenser gun for
Aero T ch and similar twin
epoxy syringes.
S-SE57
Aero Tech Dispenser ................. £34.99
Fast drying superfine plastic filler.
Fills and finishes to invisible seams in
minutes. Simple water clean-up.
• Ultra-smooth finish
• Fills deep cavities
• Takes paint easily
• Low odour
S-SE59
Perfect Plastic Putty 40ml............. £4.50
Roket Re-cap
AeroT ch Epoxy
nozzles
Replacement caps and tips
to make your Roket glue flow
like new. Fits Roket CA, Card
Glue and Super’Phatic!
Specially designed auto-mix nozzles
for use with Aero T ch epoxy ensuring
thorough mixing & maximum strength.
S-SE58
Aero Tech Auto Mix 8cm Nozzles (Pk5)...........£5.99
S-SE60
Roket Re-Cap.....................£2.50
EZE DOPE
Plastic magic
The new, safer formula Plastic Magic is a
liquid solvent glue that produces invisible
glue lines. Plastic Magic bonds nearly all
commonly used modelling plastics including
polyester, styrene, ABS, PVC, Butyrate and
Polycarbonate.
S-SE54
New Formula Plastic
Magic 50ml........... £4.25
Featuring a safe
non-flammable formula which
has little odour, Eze Dope
is super thin and is easily
brushed to shrink tissue,
drying quickly to a traditional,
tough, fuel proof, semi matt
finish. With a covering range
of 5 sq metres from its 250ml
quantity, it goes a long way!
S-SE53
Eze Dope 250ml............... £6.99
roket plastic adhesive
Supplied with a fine point applicator and anti-clog tip,
Roket Plastic Glue is a safe, non-toxic, alternative to liquid plastic
cement. Its safe, non-flammable formula has little odour and is water
washable. Its superfine anti clog tip and delayed 8-10 second action
gives more working time when bonding model kit plastics. Bonds
styrene, polyester, butyrate, and ABS. Bond speed varies with plastic
type and temperature.
S-SE52
Roket Plastic Adhesive 30ml.................................... £4.99
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
67
NEW ITEMS 2012
Scale...
r
e
p
u
S
F lyer!
r
e
p
u
S
www.ripmax.com
Wingspan: 1730mm (68”)
Length: 2360mm (93”)
Weight: 12-13Kg (26.5 - 28.5Lbs)
Radio:
8 Channel Minimum (8 - 10 Servos)
Turbine: 80 - 120 Newton Thrust
Optional ACCESSORIES
Flying Legends HAWKER HUNTER
This superb 1/6th scale replica of the world famous Hawker Hunter
is of fully moulded composite construction and is designed to suit
turbines of 80 to 120 Newtons thrust levels. Developed from the
original design of world famous scale modeller Mick Reeves, a
great deal of work has been expended to produce an accurate
scale model that can be owned and flown by any competent
model jet pilot. Supplied pre-painted in characteristic RAF colour
scheme, much of the detailed work has been completed at the
factory, including the installation of the retractable undercarriage,
scale oleo legs and wheels, as well as all undercarriage doors,
rear fuselage airbrake and operating rams. Optional extras include
a fully detailed and finished cockpit interior and drop tanks, as well
as a stainless steel twin wall tailpipe.
Q-FL150
Flying Legends Hawker Hunter MkVI................£2,399.99
ted and
n
i
a
P
e
y Pr
led !
Fac tor r r iage Instal
a
Underc
To add even greater visual appeal to the superb
Hawker Hunter Mk IV simply fit this fully detailed,
pre-assembled and painted scale cockpit.
(Pilot not included)
Q-FL150/SC
Hunter Scale Cockpit ...............£149.99
Designed to suit most 80-120 Newton thrust turbines,
this twin wall pipe has been developed for the Hunter.
Q-FL150/TP
Hunter Tailpipe (80-120) ............£109.99
Hunters were frequently flown with drop tanks, so
we have produced these accurate scale drop tanks
which are supplied complete
with mounting pylons,
all being pre-painted.
Q-FL150/DT
Hunter Drop Tank Set..................£89.99
Due to the specialised nature of the Hunter it will only be available from a limited number of model shops, details of these will be available at www.ripmax.com
68
Distributed to all good model shops by:
See the full Ripmax range at www.ripmax.com
This Catalogue has been produced entirely
in-house by the Ripmax Graphics Department.
Published by: Ripmax Ltd,
241 Green Street,
Enfield,
EN3 7SJ.
Tel: +44 (0) 20 8282 7500
Fax: +44 (0) 20 8282 7501
www.ripmax.com
Designed and Created by:
Bob Petrie, Richard Millen,
Alex Ottway and Alan Wood
Compiled by:
Nick Moss, Mark Wood, Jon Wesley and Colin Straus
Ripmax Ltd, 241 Green Street,
Enfield, EN3 7SJ. www.ripmax.com
Download PDF