Better Music Builder | Dynamic fusion series | Owner`s manual | Better Music Builder Dynamic fusion series Owner`s manual

Better Music Builder .com
®
Better Music Builder® is a leader in the Audio and
Karaoke equipment industry. We are committed to
offering you high quality audio products. Unlike any others
brand, we deliver the best cost and value to you directly.
For the latest update information including operation
manuals, installation instructions, hook-up diagram and
other new technologies updates etc. please visit us at our
website w w w.B et terM usicB uil der.com.
Passionate about Music
OWNER'S MANUAL
110421
Dynamic Fusion Series is a high-end live sound system
designed by the engineering team of Better Music
Builder. This high-end series give you live music experience, high power output and superior sound quality.
Bass Powered Subwoofer
SUPERIOR GRADE
DFS-112 SUB 2.1 12-inch WOOFER
DFS-115 SUB 2.1 15-inch WOOFER
DFS-115 SUB 2.1
DFS-112 SUB 2.1
Thank you for purchasing this unit. To
make full and effective use of this unit,
please read this Owner's Manual
carefully before operating it. Please
retain this manual for future reference.
w w w. B e t t e rM usi c B ui l d e r.c o m
CONTENTS
Intro
Features
Safety
Connection
Applications
INTRODUCTION..................................................................................................................................... 3
SYSTEM FEATURES................................................................................................................................. 3
SAFETY INSTRUCTIONS.................................................................................................................. 4~5
SPEAKER CONNECTION METHODS AND INFORMATION........................................................ 6
SYSTEM APPLICATIONS....................................................................................................................... 7
• Dynamic Fusion System Functioning.................................................................................................... 7
• Dynamic Fusion System Large Format................................................................................................. 8
• Connecting the Pre-out and Line-out Output..................................................................................... 8
• Dynamic Fusion System Operates with 5-d Pro Audio (Large Format)....................................9
Speaker
CONTROLS AND FUNCTIONS......................................................................................................... 10
• Rear Panel.................................................................................................................................................. 10
Set Up
SYSTEM SETUP GUIDELINES............................................................................................................. 10
• Placing the Speakers on the Speaker Mounting Pole (Adjustable)........................................ 10
Dimensions
Spec
Troubleshooting
Warranty
Notices
Final Words
Contact Us
PHYSICAL DIMENSIONS.................................................................................................................... 11
SPECIFICATIONS.................................................................................................................................. 11
TROUBLESHOOTING.......................................................................................................................... 12
WARRANTY.......................................................................................................................................... 13
AGENCY REGULATORY NOTICES................................................................................................... 14
FINAL WORDS TO USER.................................................................................................................... 15
CONTACT INFORMATION................................................................................................................ 15
2
Intro
INTRODUCTION
Features
The Dynamic Fusion Series by Better Music Builder are high
performance speakers featuring Dynamic Fusion Technology
™.
SYSTEM FEATURES
DFS-112 SUB 2.1
• High output SPL and sensitivity
• 1 x 12” high power low frequency transducer with
75mm~100mm voice coil
• Built-in power amplifier modules
• Can be combined with two 150W full range speaker
• Volume control (Bass, Treble, Line Volume, Sub Volume,
Balance, and High Cut)
• RCA audio input
• Dedicated microphone inputs with volume control
• Speakon output connectors
• Built-in variable crossover 80Hz~250Hz high cut
• Computer aided design to optimize frequency and phase
response
• Cabinet designed for FOH use
• Suitable for use with any full range or mid/high speaker
cabinets for extended low frequency, high quality music
reproduction
• Integral 35mm pole receptacle for mounting full range or
mid/high speaker cabinet
• Powder coated grill with foam backing
• Durable Polyurethane textured base paint
The Dynamic Fusion Series are developed with the latest
computer stimulation design and manufacturing technology. It
scores high in quality, clarity and reliability with its unique LF
and HF extension technology. The LF unit is manufactured
with non-linear fabric paper cone to provide waterproof
feature, while the HF unit is manufactured with high temperature treated magnalium diaphragm, voice coil with copper
cladding aluminum wire, and compression cavity designed
with linear phase technology. Its featured magnetic circuit
tweeter generates high magnetic energy, low distortion,
excellent ventilation function and high strength plywood that
can absorb the unwanted noise for superior performance.
These heavy duty speakers are made with solid dense
plywood with a durable advanced environmental protection
polyurethane-based painting. They are armored with strong
materials that are tough enough to withstand even harsh
conditions and weather. Furthermore their strong design
helps reduce interference and therefore enhances the quality
of the sound. Because of its excellent performance and
durability, the Dynamic Fusion Series are great for commercial and outdoor uses.
DFS-115 SUB 2.1
• High output SPL and sensitivity
• 1 x 15” high power low frequency transducer with
75mm~100mm voice coil
• Built-in power amplifier modules
• Can be combined with two 150W full range speaker
• Volume control (Bass, Treble, Line Volume, Sub Volume,
Balance, and High Cut)
• RCA audio input
• Dedicated microphone inputs with volume control
• Speakon output connectors
• Built-in variable crossover 80Hz~250Hz high cut
• Computer aided design to optimize frequency and phase
response
• Cabinet designed for FOH use
• Suitable for use with any full range or mid/high speaker
cabinets for extended low frequency, high quality music
reproduction
• Integral 35mm pole receptacle for mounting full range or
mid/high speaker cabinet
• Powder coated grill with foam backing
• Durable Polyurethane textured base paint
The DFS-112 SUB 2.1 and the DFS-115 SUB 2.1 are created
to bring you simplicity and convenience. They are loaded
with everything you needed to get started. These speakers
are “powered,” which means they have amplifiers already
built-in. Being a powered speaker, each model has the
power to drive two other external speakers for a combined
maximum power of 800 Watts (500W + 150W + 150W).
Another one of its convenient features is the included two
dedicated microphone inputs for vocal and musical instruments along with its own volume control.
THIS SUBWOOFER INCLUDES THE FOLLOW:
• BASS POWERED SUBWOOFER: 1 pc
• Instructional Manual: 1 pc
• Warranty & Registration Card: 1 pc
3
Safety
ABNORMALITY
SAFETY INSTRUCTIONS
• If the power cord or plug becomes frayed or damaged,
or if there is a sudden loss of sound during use of the
device, or if any unusual smells or smoke should appear to
be caused by it, immediately turn off the power switch,
disconnect the electric plug from the outlet, and have the
device inspected by qualified Better Music Builder service
personnel.
• If this device should be dropped or damaged, immediately
turn off the power switch, disconnect the electric plug from
the outlet, and have the device inspected by qualified
Better Music Builder service personnel.
We will not notify you any errors or changes in this manual in
advance. If there are any errors and changes in this manual,
we will make the corrections in a timely manner. The
corrections and changes will be on our website. Therefore,
please visit our website at BetterMusicBuilder.com frequently
to find out the most updated information, corrections on errors
and changes in this manual. You may also contact us at toll
free at 1-800-318-2218.
LOCATION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS
INSIDE REFER SERVICING TO QUALIFIED PERSONNEL
• Always consult qualified Better Music Builder service
personnel if the device installation requires construction
work, and make sure to observe the following precautions.
• Choose mounting hardware and an installation location
that can support the weight of the device.
• Avoid locations that are exposed to constant vibration.
CAUTIONS FOR INSTALLATION
POWER SUPPLY / POWER CORD
• Only use the voltage specified as correct for the device.
The required voltage is printed on the name plate of the
device.
• Use only the included power cord.
• Do not place the power cord near heat sources such as
heaters or radiators, and do not excessively bend or
otherwise damage the cord, place heavy objects on it, or
place it in a position where anyone could walk on, trip
over, or roll anything over it.
• Remove the electric plug from the outlet when the device is
not to be used for extended periods of time, or during
electrical storms.
• When removing the electric plug from the device or an
outlet, always hold the plug itself and not the cord. Pulling
by the cord can damage it.
NO GOOD
DO NOT OPEN
• Inspect the device periodically.
• When transporting or moving the device, always use two
or more person. Attempting to lift the device by yourself
may damage your back, result in other injury, or cause
damage to the device itself.
• Before moving the device, remove all connected cables.
• Do not use the device in a confined, poorly-ventilated
location. If this device is to be used in a small space
other than an EIA-standard rack, make sure that there is
adequate space between the device and surrounding
walls or other devices: at least 30cm at the sides, 30cm
behind and 30cm above. Inadequate ventilation can
result in overheating, possibly causing damage to the
device(s), or even fire.
• Do not open the device or attempt to disassemble the
internal parts or modify them in any way. The device
contains no user-serviceable parts. If it should appear to
be malfunctioning, discontinue use immediately and have
it inspected by qualified Better Music Builder service
personnel.
WATER WARNING
• Do not expose the device to rain, use it near water or in
damp or wet conditions, or place containers on it
containing liquids which might spill into an openings.
• Never insert or remove an electric plug with wet hands.
4
• Do not use the speaker’s handles for suspended installation.
Doing so can result in damage or injury.
• Do no expose the device to excessive dust or vibrations,
or extreme cold or heat (such as in direct sunlight, near a
heater, or in a car during the day) to prevent the possibility
of panel disfiguration or damage to the internal
components.
• Do not place the device in an unstable position where it
might accidentally fall over.
The speakers have coded terminals that accept a variety or
wire connectors.
CONNECTIONS
IMPORTANT: Do not reverse polarities (i.e., + to – or – to +)
when making connections. Doing so will cause poor imaging
and diminished bass response.
To ensure proper polarity, connect each + terminal on the
back of the amplifier or receiver to the respective + (red)
terminal on each speaker. Connect the – (black) terminals in
a similar way. See the owner’s guides that were included
with your amplifier, receiver and television to confirm connection procedures.
• Before connecting the device to other devices, turn off the
power for all devices. Before turning the power on or off
for all devices, set all volume levels to minimum.
ADJUSTING
CAUTION
Check the speakers for playback, first by setting the system
volume control to a minimum level, and then by applying
power to your audio system. Play a favorite music or video
segment and increase the system volume control to a comfortable level.
• When turning on the AC power in your audio system,
always turn on the device LAST, to avoid speaker damage.
When turning the power off, the device should be turned
off FIRST for the same reason.
• Do not insert your fingers or hands in any gaps or
openings on the device (ports, etc.).
• Avoid inserting or dropping foreign objects (paper, plastic,
metal, etc.) into any gaps or openings on the device
(ports, etc.). If this happens, turn off the power immediately
and unplug the power cord from the AC outlet. Then
have the device inspected by qualified Better Music
Builder service personnel.
• Do not use the device for a long period of time at a high
or uncomfortable volume level, since this can cause
permanent hearing loss. If you experience any hearing
loss or ringing in the ears, consult a physician.
• Do not operate the device if the sound is distorting.
Prolonged use in this condition could cause overheating
and result in fire.
• Do not rest your weight on the device or place heavy
objects on it, and avoid using excessive force on the
buttons, switches or connectors.
You should hear balanced audio reproduction across
the entire frequency spectrum. If not, check all wiring connections or consult the authorized dealer from whom you
purchased the system for more help.
NOTE
The amount of bass you hear and the stereo-image quality
will be affected by a number of different factors, including the
room’s size and shape, the construction materials used to
build the room, the listener’s position relative to the speakers,
and the position of the speakers in the room.
Listen to a variety of music selections and note the bass level.
If there is too much bass, move the speakers away from
nearby walls. Conversely, if you place the speakers closer to
the walls, there will be more bass output.
CARING
Each enclosure has a finish that does not require any routine
maintenance. When needed, use a soft cloth to remove any
fingerprints or dust from the enclosure or grille.
GETTING STARTED
WIRING
IMPORTANT: Make sure all equipments are turned off before
making any connections.
For speaker connections, use a high-quality speaker wire with
polarity coding. The side of the wire with a ridge or other
coding is usually considered positive polarity.
If desired, consult Better Music Builder technical
NOTE
support for speaker wire and connection options.
5
Connection
SPEAKER CONNECTION METHODS AND INFORMATION
SPEAKON Y CONNECTORS
INPUT
EXAMPLE OF SPEAKON CONNECTOR
OUTPUT
+ 8
4
–
LO
LO
CK
CK
There are two groups on the speakon connectors: Group 1
(+1, –1) and Group 2 (+2, –2) as indicated in the diagram. In
order to use it, your speaker must have multi-functions (i.e.
enable two sources of signal for input). If your speaker does
not have multi-functions, it would not work with the Group 2
for connection. Please refer to the following diagram for
connection.
2
2–
1+ 2+
1–
Connector Panel
– 8
+ 4
2
TO
AMPLIFIER
REFERENCE CONNECT
TO CHANNEL 2
SPEAKER
NL4 SPEAKON
OUTPUT
TO CHANNEL 1
SPEAKER
NL4 SPEAKON
INPUT
Speakon Outputs
1+
1– 2–
2+
The upper Speakon jack has both Channel 1 and
Channel 2 outputs, so it is especially useful for parallel,
bi-amp, or BRIDGE mono operation. The other Speakon
carries only Channel 2's output. See the illustrations at
above.
Connector Panel on Multi-Way Systems
SPEAKON CONNECTORS
INPUT
TO
AMPLIFIER
OUTPUT
NL4 SPEAKON
OUTPUT
+ 8
4
–
CK
LO
LO
CK
FULL
RANGE
NL4
SPEAKON
INPUT
BI-AMP
LF
2
1+
1– 2–
2+
HF
2–
1+ 2+
1–
Connector Panel on Subwoofers
REFERENCE CONNECT
SOURCE
(from active/powered)
BRIDGE
INPUT PASSIVE OUTPUT
INPUT BI-AMPLING OUTPUT
1+
1+
1+
1–
1–
1–
1+
1–
SUB
WOOFER
Source (INPUT) comes from the output source of the
active/powered speaker while the bridge (OUTPUT)
connects to the passive/non-powered speaker.
SUB
WOOFER
2+
2+
2+
2–
2–
2–
2+
2–
OUTPUT
INPUT
PASSIVE
A speakon cable is required to connect the “OUTPUT”
of the acive/powered speaker to the “INPUT” of the
passive/non--powered speaker. Please order the speakon
cable from our authorized dealers.
NOTE
6
BI-AMPLING
SYSTEM APPLICATIONS
Applications
DYNAMIC FUSION SYSTEM MEDIUM FORMAT
DFS-915
There are two kinds of subwoofer: active/powered
subwoofer and passive/non-powered subwoofer. For
powered subwoofer, you need connecting it to mixer. For
non-powered subwoofer, you need a power amplifier to
operate it. For high power output, you need a high power
amplifier. Please consult with our authorized dealers for the
technical aspects in details.
DFS-912
DFS-306
DFS-112 SUB
SOUND COVERAGE
30%
0%
Average
100%
DFS-118 SUB
DFS-112 SUB
SOUND COVERAGE
60%
0%
Average
SOUND COVERAGE
80%
100%
0%
CENTER/MONITOR
DFS-306
100%
Average
CENTER/MONITOR
DFS-306
NL4 SPEAKON
NL4 SPEAKON
BASS POWERED SUBWOOFER
DFS-112 SUB 2.1 / DFS-115 SUB 2.1
SPEAKON CONNECT TO OUTPUT
SPEAKON CONNECT TO INPUT
210
160
OUTPUT
LEFT
250
120
DFS-112 SUB 2.1
[Bass Powered Subwoofer]
500W + 100W + 100W
360121121300
Better Music Builder® .com
L /R CLIP
SUB CLIP
Hz
110
80
90
PRE OUT
85
SUBVOL
HIGH CUT
RIGHT
OUTPUT
LINE
IN /OUT
LEFT
BALANCE
L
RIGHT
R
LINE VOL
+10
MIC2
ON
OFF
–10
TREBLE
MIC2 VOL
+10
USE ONLY WITH A 250V FUSE
MIC1
–10
BASS
MIC1 VOL
7
bettermusicbuilder.com Engineered in USA
Manufacture in P.R.C. Code: 36021300
®
DYNAMIC FUSION SYSTEM LARGE FORMAT
OUTPUT
LEFT
DFS-910
DFS-910
OUTPUT
RIGHT
ON
OFF
USE ONLY WITH A 250V FUSE
DFS-112 SUB 2.1 REAR VIEW
BASS POWERED SUBWOOFER
DFS-112 SUB 2.1 / DFS-115 SUB 2.1
CONNECTING THE PRE-OUT AND LINE-OUT OUTPUT
AT&T
9:42AM
Calendar
Contact
88%
Note
Map
Movies
YouTube
iTunes
App Store
Calculator
Library
Camera
Recorder
Setting
Time
Search
Safari
Mail
Pictures
OR
iPod
CD PLAYER
RECORD PLAYER
iPhone
(⅛ Cable / 3.55 mm)
MUSIC SOURCE INPUT
®
210
OUTPUT
360121121300
160
LEFT
250
120
L /R CLIP
SUB CLIP
Hz
110
80
90
PRE OUT
85
SUBVOL
HIGH CUT
RIGHT
OUTPUT
LINE
IN /OUT
LEFT
BALANCE
L
RIGHT
R
LINE VOL
+10
MIC2
ON
OFF
–10
TREBLE
MIC2 VOL
+10
USE ONLY WITH A 250V FUSE
MIC1
–10
BASS
MIC1 VOL
DFS-112 SUB 2.1 REAR VIEW
WIRED MIC.
GUITAR
8
bettermusicbuilder.com Engineered in USA
Manufacture in P.R.C. Code: 36021300
Better Music Builder® .com
DYNAMIC FUSION SYSTEM OPERATES WITH 5-D PRO AUDIO (LARGE FORMAT)
Better Music Builder has a DX-6000 G2
audio/video effect processor that can provide
five divisions (5-D) pro audio for large format use.
The DX-6000 G2 processor needs to operate
with three powered amplifiers (i.e. one powered
amplifier to drive two center vocal monitor
speakers in parallel, another powered amplifier
to drive Group-A speakers for high and mid
range frequency, and third powered amplifier to
drive Group-B speakers for full range frequency).
SOURCE
EFFECT MODE
A
B
LEFT
KEY CONTROL
VOD
L
R
HD LIVE SOUND
PROCESSOR
DX-6000 G2
KOD
L
R
EFFECT VOLUME
INPUT
MIC VOLUME
MUSIC VOLUME
High Definition Live Sound
C
RIGHT
CENTER
SUB
AUX1-L
AUX1-R
AUX2-L
AUX2-R
HEADPHONE
MONITOR
MICROPHONE INPUT TERMINAL
EFFECT_C  M_VCD
EFF:00 MIC:00 MUS:00
®
RS
Better Music Builder
Passionate about Music
AUDIO VIDEO EFFECTS PROCESSOR DX-6000 G2
POWER
MIC 1
MIC 1/4 VOL
MIC 2
MIC 2/5 VOL
MIC 3
MIC 3 VOL
HEADPHONE
DISPLAY
CONTRAST
HP VOL
HIGH PASS
CENTER MONITOR
2-CHANNEL POWER AMPLIFIER
DX-6000 G2 provides low frequency line out to
one or two powered subwoofers. The whole
concept borrows the idea of a 5-channel home
theater to produce a live sound effect in our
system. You can use this system for public and
commercial use. Better Music Builder have three
different models of powered amplifiers to operate
with the Dynamic Fusion System.
NOTE
For installation, we highly recommend
you hiring a professional audio contractor to
do the job for safety purpose.
DVD
L
R
AUX-INPUT
MODE
MODE
MODE
PARALLEL
VOCAL
CENTER 1
CENTER
CENTER 2
HIGH PASS
MAIN GROUP A
3-CHANNEL POWER AMPLIFIER
LEFT
GROUP A
RIGHT
HIGH PASS
MAIN GROUP B
4-CHANNEL POWER AMPLIFIER
LOW PASS
SUB 1
LEFT
GROUP B
RIGHT
VIDEO IN
LOW PASS
SUB 2
POWERED SUB
DFS-112 SUB 2.1
POWERED SUB
DFS-115 SUB 2.1
5-D PRO AUDIO DX-288 G2
KTV VIDEO TOUCH SCREEN STAND
HD VOCAL LOUDSPEAKER DFS-912/DFS-915
MAIN LEFT SPEAKER DFS-206
CENTER / MONITOR DFS-306
VIDEO MONITOR
MAIN RIGHT SPEAKER DFS-206
HD VOCAL LOUDSPEAKER DFS-912/DFS-915
KTV VIDEO TOUCH SCREEN STAND
9
Speaker
CONTROLS AND FUNCTIONS
2
3
4
DFS-112 SUB 2.1
OUTPUT
360121121300
5
LEFT
250
120
L /R CLIP
SUB CLIP
Hz
110
80
90
PRE OUT
85
SUBVOL
HIGH CUT
RIGHT
6
OUTPUT
LINE
IN /OUT
LEFT
7
BALANCE
L
RIGHT
16
bettermusicbuilder.com Engineered in USA
Manufacture in P.R.C. Code: 36021300
[Bass Powered Subwoofer]
500W + 100W + 100W
210
160
17
R
LINE VOL
+10
8
MIC2
ON
18
OFF
–10
9
TREBLE
MIC2 VOL
+10
USE ONLY WITH A 250V FUSE
10
MIC1
–10
BASS
11
19
MIC1 VOL
12
13
14
15
REAR PANEL:
35MM SPEAKER STAND MOUNT
LEFT/RIGHT CLIP
3
SUB CLIP
4
SUB VOLUME CONTROL
5
HIGH CUT CONTROL
6
BALANCE CONTROL
7
LINE VOLUME CONTROL
8
TREBLE CONTROL
9
MICROPHONE 2 VOLUME CONTROL
®
Better Music Builder® .com
210
160
DFS-115 SUB 2.1
[Bass Powered Subwoofer]
500W + 150W + 150W
OUTPUT
LEFT
250
120
360121124600
2
1
L /R CLIP
SUB CLIP
Hz
110
80
90
PRE OUT
85
SUBVOL
HIGH CUT
RIGHT
LINE
IN /OUT
LEFT
BALANCE
L
OUTPUT
RIGHT
R
LINE VOL
+10
MIC2
ON
OFF
–10
TREBLE
MIC2 VOL
+10
USE ONLY WITH A 250V FUSE
MIC1
–10
BASS
Top View
Set Up
MIC1 VOL
Rear View
SYSTEM SETUP GUIDELINES
PLACING THE SPEAKERS ON THE SPEAKER
MOUNTING POLE (Adjustable)
Part Number: AM91 (Optional)
NOTE
The speaker mounting pole as
indicated in the diagram is not included
with any of our speaker models. You
may order it directly from our
authorized dealers near you.
10 BASS CONTROL
11 MICROPHONE 1 VOLUME CONTROL
12 MICROPHONE 2 INPUT (¼ inch SLOT)
13 MICROPHONE 1 INPUT (¼ inch SLOT)
DFS-915
DFS-306
14 LINE LEFT/RIGHT INPUT
15 PRE-OUT LEFT/RIGHT OUTPUT
SPEAKER
MOUNTING
POLE
(Adjustable)
38 inch
96.5 cm
16 XLR LEFT OUTPUT
17 XLR RIGHT OUTPUT
18 POWER SWITCH ON/OFF
DFS-112 SUB 2.1
MEDIUM FORMAT
19 AC-POWER INPUT TERMINAL
10
DFS-115 SUB 2.1
LARGE FORMAT
bettermusicbuilder.com Engineered in USA
Manufacture in P.R.C. Code: 36024600
1
Dimensions
PHYSICAL DIMENSIONS
DFS-112 SUB 2.1
Front View
BASS POWERED SUBWOOFER
Side View
®
MODEL
DFS-112 SUB 2.1
DFS-115 SUB 2.1
NET WEIGHT
53.6 Lbs / 24.3 Kg
(each)
105.8 Lbs / 48 Kg
(each)
SHIPPING WEIGHT
58 Lbs / 26.3 Kg
(each)
112.4 Lbs / 51 Kg
(each)
DIMENSIONS
(WXHXD)
18.1×14.6×17.8 in
46×37×45.2 cm
23.6x19.3x22.9 in
60x49x58.1 cm
PACKING
DIMENSIONS
(WXHXD)
21.7×18.5×21.7 in
55×47×55 cm
(each)
28.7x24.8x28 in
73x63x71 cm
(each)
14.6 inch
37 cm
14.6 inch
37 cm
18.1 inch
46 cm
17.8 inch
45.2 cm
Back View
Top View
14.6 inch
37 cm
17.8 inch
45.2 cm
18.1 inch
46 cm
18.1 inch
46 cm
Bottom View
Spec
SPECIFICATIONS
17.8 inch
45.2 cm
BASS POWERED SUBWOOFER
18.1 inch
46 cm
DFS-115 SUB 2.1
MODEL
Front View
DFS-112 SUB 2.1
DFS-115 SUB 2.1
TYPE
Subwoofer
Subwoofer
POWER OUTPUT
500W+150W+150W
500W+150W+150W
CABINET
MATERIAL
Polypropylene &
Trapezoid
Polypropylene &
Trapezoid
SUPPORTED
FIXTURE
Ground,
Floor Stand
Ground,
Floor Stand
WOOFER [LF]
12” (1 unit)
15” (1 unit)
“SPOT” RANGE
Exponential LF Horn
Configuration
Exponential LF Horn
Configuration
FREQUENCY
RESPONSE
Side View
®
19.3 inch
49 cm
23.6 inch
60 cm
22.9 inch
58.1 cm
Back View
Top View
19.3 inch
49 cm
23.6 inch
60 cm
123 dB
123 dB
HIGHLIGHTED
FEATURES
75mm Voice Coil
75mm Voice Coil
22.9 inch
58.1 cm
23.6 inch
60 cm
Bottom View
Subwoofer: 80Hz ~ 250Hz Subwoofer: 80Hz ~ 250Hz
Stereo: 250~20kHz
Stereo: 250~20kHz
SENSITIVITY
19.3 inch
49 cm
22.9 inch
58.1 cm
23.6 inch
60 cm
11
Troubleshooting
TROUBLESHOOTING
1. SYMPTOM: NO SOUNDS COMING OUT FROM THE
SPEAKERS
4. SYMPTOM: MICROPHONE VOLUME IS TOO LOW.
Probable causes:
Probable causes:
A. The microphone is poorly connected to the speaker.
1. The A/C power of the speaker is turned off.
B. The volume on the speaker is too low.
2. Wrong A/C power selection (i.e. 110V~ 220V).
Remedy:
Remedy:
A. Check the connection between the microphone and the
speaker. Make sure that they are connected properly.
Condense microphone doesn't work with the speaker. You
may need to change to a dynamic vocal microphone.
A. Turn on the A/C power of the speaker.
B. Make sure the receiver or amplifier is on and the source is
playing.
B. Turn the volume to an appropriate level. If the volume is
still not high enough, you may need to upgrade your existing
audio system to a system with much higher output.
C. Check all wires and connections between receivers,
amplifiers and speakers. Make sure all wires are connected,
none of the speaker wires are frayed, cut or punctured, and
that no wires are touching each other.
D. Review proper operation of your receiver or amplifier.
5. SYMPTOM: SOUNDS LIKE DAZZ, DAZZ, DAZZ ........
COMING FROM THE SPEAKER.
E. Choose the right A/C power.
Probable cause:
The speaker cable (with small gauges) is over 100 feet.
2. SYMPTOM: NO SOUNDS COMING OUT FROM ONLY
ONE SPEAKER
Remedy:
Probable cause:
Change to a higher quality cable preferably 12 and 14
gauges.
The A/C power of the speaker is turned off.
Remedy:
6. SYMPTOM: TOO MUCH MICROPHONE FEEDBACK
FROM THE SPEAKER.
A. Check the "Balance" control on your receiver or amplifier.
B. Check all wires and connections between receiver,
amplifier and speaker. Make sure all wires are connected,
none of the speaker wires are frayed, cut or punctured, and
that no wires are touching each other.
Probable cause:
Incorrect tremble and bass adjustments on the speaker.
Remedy:
C. Turn off all electronics and switch the speaker in question
with another speaker that is working correctly. Turn
everything back on, and determine whether the problem is in
the same place: i.e., the speaker that was working previously
now has no sound and the speaker that was not working
now sounds fine. If the problem is in the same place, the
source of the problem is most likely with your receiver or
amplifier, and you should consult the owner's manual for
further information. If the problem is with the speaker, consult
your dealer for further assistance, or visit our web site for
technical support.
Adjust the tremble and bass to an appropriate level to avoid
microphone feedback.
7. SYMPTOM: NO SOUND FROM THE MAIN SPEAKERS
Probable cause:
Speaker connectors are not connected properly.
Remedy:
Please make sure that the speaker connectors are locked
tight. Please also note that there are two groups of speakon
connectors (i.e. Group 1 +1, –1, Group 2 +2, –2). Make
sure that your speakers have the multifunction that enables the
connection to Group 2 for different signal inputs. The basic
connection is on Group 1 (+1, –1).
3. SYMPTOM: NOISES FROM THE SPEAKER.
Probable cause:
The A/C power cord of the speaker is not grounded.
Remedy:
Change a new magnet cord of the A/C power cord.
12
Warranty
WARRANTY
ONE-YEAR LIMITED WARRANTY FOR HOME USE
EQUIPMENT
ADDITIONAL NOTES:
1. Limited warranty for home use equipment is only valid in
North America.
Our one-year warranty covers both parts and labors. The
warranty becomes effective from the date of your purchase
for one year.
2. Limited warranty is valid only if you purchase our products
from our authorized dealers (including both regular retailers
and online retailers) in North America. If you choose to
purchase our products from an authorized dealer, we will not
provide any limited product warranty for you. To protect your
limited product warranty, please purchase our products from
one of our authorized dealers in North America near you.
Our warranty only covers defects due to product
defectiveness with free of defects in materials or
workmanship. However, our warranty does not cover defects
due to normal wears, damage in transit, improper use, abuse
or failure to follow the proper instructions for maintenance.
This warranty is void in the event of unauthorized repairs,
alternations, modifications and removing of the product label.
3. Limited warranty is automatically void if the yellow label
stating “No Warranty After Opening” is removed from the
product.
Please also note that our warranty does not cover any
shipping cost for the return of defective products to us for
inspection, repair and maintenance. Our warranty for Better
Music Builder products can only be executed in North
America.
TO REGISTER YOUR WARRANTY
Please fill out the warranty card that came with your unit,
download or submit online warranty form. However, we need
the invoice for your purchase in order to process this warranty.
You may also register your warranty online.
Please visit our website at w w w.b et termusicb uil d er.com.
90-DAY LIMITED WARRANTY FOR PUBLIC AND
COMMERCIAL USE EQUIPMENT
Our 90-day warranty applies to speakers, amplifiers, mixers
and microphones for both public and commercial use such as
restaurant, coffee shop, KTV nightclub, church and school,
etc. It covers both parts and labors. The warranty becomes
effective from the date of your purchase for 90 days.
Our warranty only covers defects due to product
defectiveness with free of defects in materials or
workmanship. However, our warranty does not cover defects
due to normal wears, damage in transit, improper use, abuse
or failure to follow the proper instructions for maintenance.
This warranty is void in the event of unauthorized repairs,
alternations, modifications and removing of the product label.
Please also note that our warranty does not cover any
shipping cost for the return of defective products to us for
inspection, repair and maintenance. Our warranty for Better
Music Builder products can only be executed in North
America.
13
Notices
AGENCY REGULATORY NOTICES
FEDERAL COMMUNICATIONS COMMISSION NOTICE
your waste equipment at the time of disposal will help to
conserve natural resources and ensure that it is recycled in a
manner that protects human health and the environment. For
more information about where you can drop off your waste
equipment for recycling, please contact your local city office,
your household waste disposal service or the shop where you
purchased the product.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio or television
technician for help.
JAPANESE NOTICE
JAPANESE POWER CORD NOTICE
Modifications
The FCC requires the user to be notified that any changes or
modifications made to this device that are not approved may
void the user’s authority to operate the equipment.
JAPANESE MATERIAL CONTENT DECLARATION
Cables
Connections to this device must be made with shielded cables
with metallic RFI/EMI connector hoods to maintain
compliance with FCC rules and regulations.
A Japanese regulatory requirement, defined by Specification
JIS-C-0950, 2005, mandates that manufacturers provide
Material Content Declarations for certain categories of
electronic products offered for sale after July 1, 2006.
MATERIALS DISPOSAL
KOREAN NOTICE
Disposal of this material can be regulated because of
environmental considerations. For disposal or recycling
information, contact your local authorities or the Electronic
Industries Alliance (EIA) (http://www.eiae.org).
RECYCLING PROGRAM
DISPOSAL OF WASTE EQUIPMENT BY USERS IN
PRIVATE HOUSEHOLDS IN THE EUROPEAN UNION
The terms and availability of these programs vary by
geography because of differences in regulatory requirements
and local customer demand.
This symbol on the product or on its packaging indicates that
this product must not be disposed of with your other
household waste. Instead, it is your responsibility to dispose of
your waste equipment by handing it over to a designated
collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of
因为在当地的监管要求和客户的需求,这些条件和程序的情
况不同。
14
Final Words
FINAL WORDS TO USER
Contact Us
CONTACT INFORMATION
MAILING ADDRESS
The engineering team of Better Music Builder has many
years of experience in audio equipment design. The team
constantly develops new audio technologies, designs
innovative audio and karaoke equipment to suit your specific
needs and provides you great ideas for home entertainment.
BE T TER M USI C BU I LD ER
2930 0 Kohoutek Wa y #150
Union Cit y, CA 94587
U.S.A.
Our engineering team also designs audio equipment for
commercial use by restaurants, coffee shops, churches, and
school auditoriums, etc. If the commercial area for audio
equipment installation exceeds 2,000 square feet, we highly
recommend hiring audio professionals to handle the
installation in order to avoid risks in breaking the equipment
with improper installation and safety protection purposes.
TELEPHONE NUMBERS
USA Re gion
USA Toll Fre e: 1-80 0 -318-2218
S ales & M arketing: 510 - 477-9955
Customer S er vice: 510 - 477-9955
We also provide educational and technical information on
audio equipment and technologies. For example, we provide
free installation diagrams to make it easier to connect the
system. In addition, to get best connections for the sharpest
image and sound quality, we provide hot tips for choosing
the high quality type of A/V cable connections. Free
information on audio equipment and technologies available
for download from our website,
w w w.B et terM usicB uil d er.com.
FAX NUMBERS
USA Re gion
S ales & M arketing: 510 - 477-9922
Customer S er vice: 510 - 477-9922
Please do not remove the “Yellow
Label” on the rear of the machine;
otherwise, the warranty will be void
automatically. We design it to protect
your own safety. If repair and
maintenance service is needed,
Any form of
please contact us directly or hire a
tampering with this
product, will void
professional technician. To learn more
the warranty.
about the technical aspects, visit our
website w w w.B et terM usicB uil d er.com and download
the relevant information for review.
WORLD WIDE WEB
E-mail: sales@bettermusicbuilder.com
Website: www.bettermusicbuilder.com
MAINTENANCE
With proper maintenance and regular service, it would
maintain the machine quality and prolong its life. We
recommend you to print the following information clearly for
future reference on maintenance and warranty.
Before hooking up the system, turn off the power on all
machines including audio/video equipment and TV.
Otherwise, it may damage the equipment, especially on the
HDTV in which a spot might appeared on the TV screen.
After hooking up the system, double check the audio/video
connections to ensure that they are connected correctly.
MODEL#_____________________INVOICE #_____________
DATE PURCHASED (MM/DD/YYYY)____________________
Sometimes, loose or poor quality cable would affect
the microphone effects, picture quality, or even cause the
machine to shut down suddenly.
NOTE
DEALER NAME______________________________________
CITY_____________ ST./PROV.______ZIP/P.C.____________
Again, thank you for choosing Better Music Builder. We
hope you can make the best use of the machine and enjoy it
for years to come. If you have any questions regarding our
product, please feel free to contact us at
w w w.B et terM usicB uil d er.com.
DEALER WEBSITE http://www.________________________
DEALER PHONE #___________________________________
DEALER E-MAIL______________________________________
15
Better Music Builder .com
®
Passionate about Music
Thank you for purchasing this unit. To make full
and effective use of this unit, please read this
Owner's Manual carefully before operating it.
Please retain this manual for future reference.
360121124600
Printed on 100% Recycled Paper
Code: 20121121
Comments E-mail to sales@bettermusicbuilder.com
Copyright © 2013 Better Music Builder. All rights reserved. Legal trademark.
Download PDF