datasheet for NT2016SC by Nihon Dempa Kogyo Co., Ltd. (NDK)

datasheet for NT2016SC by Nihon Dempa Kogyo Co., Ltd. (NDK)
Crystal Oscillator
Model Name NT2016SC
Temperature-Compensated Crystal Oscillator (TCXO)
NT2016S Series(with two outputs of same frequency)
Main Application
For mobile phones, etc.
Features
Supports low power supply voltage. (Supports DC +1.7 V to +3.3 V.)
Ultra-compact and light with a height, cubic volume, and weight of Max. 0.8 mm,
0.0022 cm3, and 0.008 g, respectively.
A surface-mount crystal oscillator. (Relow soldering is possible.)
Lead-free. Meets the requirements for re-low proiling using lead-free solder.
With Enable / Disable function (This function can be used for both output1 and 2).
It is possible to choose the AFC function instead of the Enable/Disable function for
output 2.
Speciications
Model
Item
• Frequency setting conditions
NT2016SC
Nominal frequency range (MHz)
1. Frequencies are set at normal temperatures (+25±2 °C).
13 to 52
Standard frequency (MHz)
26
38.4
Supply voltage [VCC] (V)
52
• If you require a product with a different frequency, power supply voltage,
frequency control range, etc. to the standard specifications, please
+1.8
Load impedance
contact us with your enquiries.
10 k //10 pF
Current consumption (mA) (Two outputs)
Output voltage
Max. 2.0
Max. 2.2
Max. 2.4
Min. 0.8 V(p-p) (DC Coupling *1)
*1. A DC-cut capacitor is not embedded in this crystal oscillator. Connect
a DC-cut capacitor (1,000 pF) to the line-out terminal of the oscillator.
Frequency/Temperature characteristics Max. ±2.0×10–6 (Max. ±0.5×10–6 available)
Operating temperature range (°C)
–30 to +85
Storage temperature range (°C)
–40 to +85
Frequency/Voltage coeficient
Max. ±0.1×10–6/+1.8 V±5 %
Frequency/Load coeficient
Max. ±0.1×10–6/(10 k //10 pF) ±10 %
Long-term frequency stability
Max. ±1.0×10–6/year
Dimensions
#5
Terminal land connections
#4
1.6±0.1
#6
List of Ordering Codes
#2
2.0±0.1
#3
Control Voltage (Enable/
Disable) for output2
#2
Output2 (Analog)
#3
GND
#4
Output1 (Analog)
#5
Control Voltage (Enable/
Disable) for output1
#6
VCC
Frequency
(MHz)
26
NT2016SC-26M-NSA3502B
38.4
NT2016SC-38.4M-NSA3502C
52
NT2016SC-52M-NSA3502D
Ordering Code
The above frequencies are NDK’s standard frequencies.
Frequencies other than the above are available.
Feel free to contact our sales representatives.
#6
#5 0.5
#4
0.4±0.1
(0.5)
(0.6)
(1.2)
(0.6)
-1-
(0.45)
#3
0.6±0.1
#2
0.4±0.05
1.2±0.05
#1
(0.8) (0.4) (0.8)
0.7±0.1
#1
#1
mm
13A_0610_NT2016SC_2output_e
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement