ANALIZADORES OROS OR3X
Measurement and Analysis Solutions
■
Instruments
■ Software
■ Services
Product Line
Noise
& Vibration
Portable Noise & Vibration Analyzers
OROS designs
and manufactures
Noise and Vibration
Analyzers with
software solutions
for in-the-field
usage as well as for
measurements in test
cells.
2
Market Oriented
Energy & Process
■ Power Generation
■ Oil & Gas
■ Chemical
■ Petrochemical
Marine
■ Shipbuilding
■ Propulsion
Aerospace
Aero Engines
■ Aircraft,
Helicopter
■ Components
■ Defense Systems,
Satellite
■
Made for
the Field
■
■
■
■
2 to 32 channels
Portable
Rugged
Real-time Analysis
Ground
Transportation
■ Passenger Vehicle
■ Heavy Vehicle
■ Automotive
Suppliers
■ Rail
Flexible
■
■
■
■
■
■
■
Online & Post Analysis
Signal Conditioning
Multi-Analysis
Remote Access
PC Free Operation
Cascadable, up
to 300+ channels
Customization
For Your Noise
& Vibration
Applications
The OROS software
platform (NVGate) features:
■ Recorder
■ FFT
■ Time Domain Analysis
■ Monitoring
Rotating Analysis
■ Constant Band Tracking
■ Synchronous Order
Analysis
■ Envelope Demodulation
■ Turbomachinery Analysis
■ Torsion
■ Balancing
Structural Analysis
Operating Deflection
Shape
■ Modal Analysis
■ FRF & Cross-Spectrum
Acquisition
■ Advanced Swept Sine
■
Acoustics Analysis
■ 1/n Octave Analysis
■ Overall Acoustics:
Levels & Profiles
■ Sound Power
■ Sound Intensity
■ Sound Mapping and
Source Localization
Accurate
■
■
■
■
3
DSP-based
24 Bit – 40 kHz
± 40V input range
Accurate: ±0.02 dB /
±0.02°
Services
■
■
■
■
■
■
■
■
Dedicated Customer
Care Department
Expertise and Assistance
Premium Contracts
Training
Hotline
Maintenance, Calibration,
Upgrades and Updates
Customized Applications
Worldwide Accredited
Maintenance Centers
3- Series Analyzers, the Powerful Noise a
NVGate is the
cornerstone for all
measurement tasks.
From field acquisition
to reporting, it
gathers the major
measurements’ steps
in a unique interface.
It hosts all OROS
software modules
driving the 3-Series
analyzers.
Much More Than a
Waterfall, a Powerful and
Flexible Data Collection
■
■
■
■
■
The Waterfall plug-in collects and
synchronizes the analyzed data.
Performance: up to 100,000 point
profiles and fluid 3D displays
at any bandwidth or channel count.
Graphics: data can be sorted
according to different parameters
(RPM, time, levels, …).
The section manager extracts orders,
overall, constant frequencies and
spectra, including band power and
automatic peak tracking.
Multiple views (3D, color map,
section, profile…) provide
parameter-linked cursors.
Continuous Time Domain
and Spectral Monitoring
4
Secured data acquisition requires
careful control of the acquired signal
prior to and during measurement.
■
■
■
Time Domain Analysis provides live
views of the front-end signals (from
milliseconds to hours).
The Monitor continuously processes
any input to monitor the incoming signals
spectra and statistics.
Both operate independently of the
measurement status (acquiring or
stopped).
NVGate, a Measurement Dashboard at Your Fingertips
NVGate runs on-line or in the office mode (hardware connected or PC only),
featuring the same interface for field measurement, post-analysis and
report generation. User selected analysis modes (plug-in analyzers) operate
independently allowing true multi-analysis capability: recorder, FFT, order,
octave, time domain analyses. Triggering functions synchronize the analysis
modes together and/or with external events.
Proven tools turn the PC in a powerful analyzer dashboard:
■ The customizable Control Panel provides the user easy access to his preferred settings.
■ Up to 16 layouts are directly accessible, multiplying the available screen size.
■ From GBytes of raw data to instantaneous spectrum, each result is efficiently displayed
through dedicated graphs.
and Vibration Platform
Narrow Band Spectral Analysis:
State-of-the-Art FFT Analyzer!
With its powerful triggering, analysis and averaging modes the FFT
plug-in provides a comprehensive set of results adapted for noise
and vibration analysis.
Averaging
■ Synchronous frequency, time and spectral domain
■ Peak-hold, referenced peak-hold
Resolution
■ 101 to 6401 lines
■ Simultaneous 128 times zoom
■ 800 mHz to 40 kHz bandwidths
■ Up to 4 FFT per channel
A wide set of results are available all along the signal processing:
■ Time domain filtered signals, trigger and weighted blocks,
■ Spectra: Instantaneous averaged and complex (auto-spectra,
spectral density, …)
■ Multi reference cross functions: Xspectra, coherence, FRFs
Recorder
OROS 3-Series systems provide an advanced recorder function.
It allows saving and post-processing of raw signals.
■
Vision Interface
■
■
■
■
Performance: records all channels at highest sampling
frequencies (102.4 kHz).
Parallel and synchronous recording and analysis: allows
the user to either monitor recordings or to keep a back-up of raw data.
Direct recording: stand-alone, set up and record without a PC.
Transient capture: advanced triggers (pre and post) and on-disk
signal buffering (FIFO) reduces the amount of data recorded prior
to the transient event.
File management: allows waveform cuts, down sampling,
channel selection and export to standard formats.
Plug-in Analyzers
Measurement Management and Reporting
■
■
■
Project
Manager
Control Panel
The Project Manager gathers signals, measurements’ results and
the analyzer’s set up parameters for easy referra on future projects
or in the review of recorded data.
The Measurement Editor formats the results into electronic reports
labeled by markers and cursors. Measurements are then easy to
recall and compare, even with live data.
The Reporter refreshes graphs, data, settings, meta-data and tables
into MS Office documents. A simple drag & drop makes the document
a report template easily updatable with current or saved measurement
data.
5
Rotating Analysis, from Acceptance Tests
Whatever the machine
type: a high speed
turbine, a compressor,
a transmission or a
slow speed engine,
OROS analyzers
provide all the tools for
rotating analysis from
acceptance tests to
diagnostics.
Rotating Speed Measurements
OROS 3-Series analyzers feature flexible and accurate shaft speed measurement tools.
Tachometer signals are over-sampled to ensure accurate rotating speed and phase.
Signals can be adjusted for better pulse detection using filters, holdoff and hystersis.
When a second gear shaft is not accessible, fractional tachometer computation allows
you to calculate its rotating speed and related order analysis.
External Trigger Channels
■ 2 tachometer inputs are standard (6 maximum)
■ High sampling rate of 6.5 MHz (< 152 ns resolution)
to allow a precise measurement of the phase.
Integrated Frequency to Voltage Converter
The torsional module utilizes an integrated software
frequency to voltage converter based on the signals
captured in the external synch inputs.
Tachometer Math Editor for CVT
Real-time calculation of the rotating speed of a
Continuously Variable Transmission (CVT) custom formula
based on 2 tachometer inputs.
Computation of Gear Elements Rotating Speed
The fractional tachometer computes the speed
and phase of the output shaft (based on one
tachometer and the gear ratio).
6
Envelope Demodulation
Damaged roller bearings are common sources of vibration.
Their vibration signal, measured with an accelerometer,
allows you to determine the mechanical failures of the
bearing. Envelope demodulation, a part of FFT-Diag
module, effectively provides this function.
Constant Band Tracking
Gearboxes’ generate modulated and often buried noise
and vibration orders, which are not easy to extract. The
CBT helps the user acquire these orders for his analysis.
Speed
[RPM]
1X
2X
3X
Synchronous Order Analysis
Order tracking is most often used when the rotor speed
varies: transient analysis. Obtaining the correct results from
run-up/down requires specific signal processing techniques.
The software module uses a resampled angular domain
signal as input data. It extracts complex orders (phase
and amplitude) acquired from fast run-up/down.
■
■
■
■
■
Up to 40 kHz real-time analysis, 1/32nd order resolution
Order or angular domain averaging
Max order display
Simultaneous order analysis on 2 shafts
Simultaneous order analysis on data recording
f [Hz]
Speed
[RPM]
1X
2X
3X
Ord [O]
s...
…to Diagnostics
Turbomachinery Vibration: ORBIGate
ORBIGate, the turbomachinery software, gathers all functions required for
turbomachinery vibration analysis into one simple to use dedicated user
interface.
■ Tabular list: Gap voltage, Overall, nX orders amplitude
and phase (0.5X, 1X, 2X, 3X, user defined), Sub1X, SMax
■ Orbits (Overall and nX filtered)
■ Full Shaft Motion: Shaft centerline + clearance circle + orbits
■ Bode, polar and trend plots
■ Spectrum, cascade and waterfall plots for advanced analysis
■ Gap voltage reference
■ Slow roll vector reference for run-out correction
■ Raw time signal recording & display
■ Real-time acquisition, post analysis (raw time based)
and data navigation
Torsion
A Frequency to Voltage converter is integrated into the analyzer’s
software using the external synch channels as inputs. It is used for the
measurement of torsional vibration and twist. The Instantaneous angular
Velocity Converter (IVC) software option provides instantaneous angular
velocity signal for the analysis plug-ins.
■
■
■
Integrated Frequency to Voltage converter
Shaft View: instantaneous angular signal for single or multiple revolutions
Cross Phase Tracking: the cross-phase order by order between
a reference channel and other speed signals. It is useful for the
identification of torsional resonances at specific orders and the
evaluation of their amplitudes
Balancing
OROS Balancing software is dedicated to rotor & shaft balancing.
It assists the user during the test and the correction process:
■
■
■
■
■
■
■
■
Balancing on 1 or 2 planes
1 or 2 sensors on each plane
Synchronous Order Analysis based
Trial mass method
Balancing quality selection
Correction position choice
Balancing prognosis
Trim balancing
Waterfall, the Synchronized Data Buffer
This specific plug-in collects and synchronizes all data coming from
the analyzers data stack. Results are arranged based on a choice of
references for the Z Axis (RPM, Time and levels) and represented in 3D
or profile views. Identifying the critical analysis item, such as speed, is
then much easier as its effects are seen in different dimensions: order,
frequency, octave. The section manager of the waterfall plug-in feature
orders, overall, constant frequencies and spectra extraction in one click.
7
Structural Analysis, from Acquisition…
8
Structural analysis
is a powerful tool
for understanding
the behavior of
industrial machinery
and their supporting
structures. It is used
in maintenance,
prototype validation
and mechanical
design as well as field
applications.
Good structural
analysis starts with
good data. For that
reason, all the tools for
efficient and accurate
acquisition have been
integrated into our
structural solutions.
Structural Acquisition With NVGate
With its dedicated structural mode, the FFT plug-in offers a comprehensive tool panel for
FRF acquisition. Whatever the method used, impact hammer or shaker excitation, FRFs
are confidently acquired.
■ Check the validity of the acquisition thanks to different displays and their preview:
- Frequency Response Function
- Coherence
- Trigger blocks
- Averaged results
■ Adjust the settings using an appropriate weighted window if necessary:
uniform, force/response, hanning…
■ Accept /reject the impact hammer measurement after validity checking
■ Hammer impact auto-range
■ Define the measurement sets in advance and use the node path sequencer to track
all measurement points
■ Export the FRF in Universal File Format and MATLAB® format
Generators
For exciting a large structure, up to 6 shakers can receive signals
from the generator outputs of the analyzer. In order to fit the wide
range of potential cases, a large series of excitation signal such
as swept sine, chirp, random, etc. can be simultaneously
generated. Any channel can be set as the reference which
generates a multiple reference FRF and cross spectrum matrix.
VibeMaster, Large Channel Count System
Large structures require a high number of input channels. With
VibeMaster, multiple OROS analyzers can be cascaded to
increase the total channel count. This solution offers the same
acquisition, recording and analysis capabilities as 3-Series analyzers
on wider scale applications.
…to the Result
OROS Modal 2 (OM2)
Now an affordable modal software providing a comprehensive package
for modal experts as well as novice engineers. OROS Modal 2 is an
application-oriented software solution utilizing the most powerful analysis
techniques with user friendly and intuitive interfaces and automatic procedures.
Geometry Building
EMA
OMA
Interactive interface to create,
modify and assemble standard
elements or complex structures
with global and local coordinate
systems. Import data from
external software in universal
file format and .iges
SIMO & MIMO
identification
methods
Narrow Band
and Broadband
identification for
responses only
measurement
Direct Acquisition
& Signal Processing
Dedicated interface for modal
acquisition with impact
hammer, shakers or under
operational conditions to
obtain:
- FRF H1, FRF H2 for EMA
- Power Spectral Density,
Half Power Spectral Density
for OMA
ODS
In time and frequency domain
Focus on Broadband method
to identify all the modes in a broad
frequency band in one time with a
high accuracy
Validation
V
M
Modal
Assurance Criterion
tto compare modal parameters from
different methods. Compatible with
d
external results from experiment and
e
ssimulation
Compatibility
W FEMtools from Dynamic
With
Design Solution
- Structural static and dynamics
simulation
- Validation and updating of
FE models for structural analysis
- Design optimization
Advanced Swept Sine (A2S)
A2S
Generator
level control
Selection
Frequency Response determination is commonly used in various industries for:
■
■
Generator
output
■
Excitation
Response Reference
Sensor
Actuator
amplifier or
conditionner
Sensor
System
under
test
■
■
Servo Control: steppers, machine tools, guiding systems
Structure: accurate FRF for modal acquisition with excellent mode separation and non linear
structure
Acoustics: absorption materials, audio systems
Electronics: filters, amplifiers
Accelerometers calibration
A2S provides the most adapted answer to these requests. Compared to the standard
functions included in a FFT analyzer, A2S dramatically surpasses the capabilities of a
random or swept sine excitation coupled with a peak hold FFT, offering:
■
■
■
Up to 80,000 points
Fine control of excitation level: control on excitation output or reference or response input
with a constant or frequency dependant level
Boosted mode: dramatically reduces the measurement time with the same accuracy
9
Acoustics Analysis, from Octave...
OROS 3-Series
portable analyzers
provide accurate
and comprehensive
results from noise
phenomena.
Acoustic analysis
can be performed
simultaneously with
other signal processing
such as FFT, recorder,
or order tracking.
1/n Octave Analysis
Acoustic signature and investigation require the use of
appropriate analysis methods. The 1/n Octave plug-in
computes levels using constant percentage band filters.
It complies with the IEC 61260 standard. Noise signals
can be analyzed real-time by the system up to 40 kHz,
making it a highly flexible acoustic analyzer.
1, 1/3rd, 1/12th, 1/24th octave
Mask, Min/Max live overlay
■ Dedicated DSP processing
■ Complies with IEC 61260 and IEC 60804
■ A,C weighting filters and other common ISO standards
■ Fast, slow, impulse time filtering
■ Leq, Short Leq, User Leq, Constant BT
■ 1/n Octave Waterfall with profile extraction by band
■
■
Overall Acoustics: Levels & Profiles
The OVA plug-in, a multi-channel sound level meter,
extends the analyzers capabilities to a comprehensive
acoustic measurement system.
■
10
■
■
■
■
■
■
■
■
Complies with the latest standards such as IEC 61672
Runs 3 RMS and a true peak detector/channel
Time filtering and weighting
User selectable 3rd order 10 Hz high pass
Long duration profile memory
(100,000 points/channel)
Classe 1 type instruments with built-in DSP
processing
International Standards compliance
ICP® for prepolarized microphone connection
200V polarization for externally polarized
microphones
82.5 dBA
…to Sound Power
z
Sound Pressure Level Measurement for
Sound Power Determination
The Sound Power software provides sound power determination in free
field environments. It is ideal for test bench: indoor (laboratory anechoic
environments) or outdoor.
■
■
■
■
■
■
■
■
■
■
Fulfills main international standards for free field environments: ISO 374x
Dedicated interface for easy and repeatable operation
All microphone positions measured at once
Overall and Spectra real-time display
Type-1 precision results in dBA
Direct Sound Power determination
Automatic standard validity check
Background and environmental corrections
Repeatability and directivity checks
Test report with Microsoft Excel
8
4
10
7
9
1
y
3
5
6
2
x
Sound Intensity Measurement for Sound Power
Determination
The Sound Intensity software provides Sound Power determination following
the point-by-point testing (ISO9614-1) or the scanning procedure (ISO9614-2).
It is ideal for tests in the field.
■
■
■
■
■
■
Real time sound intensity spectrum
Provide guidance for complying with ISO 9614-1&2
Field criteria and indicators calculation
Automatic sound power report
Calibration module for phase calibration and pressure-residual intensity index.
Probe remote control management
Sound Mapping and Source Localization
■
■
■
■
■
■
■
■
2D & 3D sound intensity mapping
Level and spectrum selectable by segment
Narrow band, octave, and 1/3 octave
Guided acquisition procedure
Multiple measurement surfaces creation
Multi-frequency views
Probe remote control management
Picture overlay
11
Made for the Field
Same Platform, Same Technology, Same Software
OR34
OR35
OR36 and OR38
The compact analyzer
(2 or 4 inputs)
The integrated multi-analyzer
(4, 6 or 8 inputs)
The recorder/multi-analyzers
(4 to 32 inputs)
OR34 is the smallest instrument in
this series. Its size sacrifices nothing
to efficiency. This 4 channel analyzer
brings all the best from the 3-Series
technology in a professional,
rugged and powerful unit.
With up to 8 dynamic inputs, by 4
parametric ones, 2 tachometer and
2 generator channels, OR35 makes
noise and vibration measurements
faster and easier than ever.
OROS puts its wealth of experience
designing analyzers for the field
into this mobile, powerful and
complete unit.
OR36 and OR38 open the way for
unrivaled measurement possibilities.
These 4 to 32 channel instruments
are able to acquire and analyze
large amount of noise and vibration
data without compromise.…
- Hand size (A5 foot print)
- Light 1.4 kgs (3 lbs)
- Uninterruptible power supply
- 2 trigger/tachometer inputs
- 1 generator output
- 1 computation DSPs
12
-
2
4
-
Easy to carry 2.8 kgs (6 lbs)
Internal battery (1 h 30 min)
2 trigger/tachometer inputs
2 independent generator
outputs
4 parametric inputs (10 S/s)
1 or 2 computation DSPs
Portable (5 kgs/11 lbs/ A4+)
4 to 16 universal inputs
1 to 4 computation DSPs
Additional Features
2 to 6 trigger/tachometer inputs
2 to 6 independent generator outputs
+/-40 V on all inputs range
Removable Mobi-Disk
-
8
OR34-VibeShot
The Vibration Catcher
Mobi-Pack
(4 to 16 inputs reinforced)
VibeShot is a version of OR34 specifically
dedicated to real-time data acquisition and
analysis
- Same hardware as OR34
- On-line FFT/recorder
- Upgradeable to regular OR34 software
The Mobi-Pack is a reinforced version of the
OR36. Installed in a super-strong carrying case,
the Mobi-Pack has essentials of the OR36 plus
a PC for running the OROS software modules.
- Same features as OR36
- All-in-one package
- Single cord power supply
- Suitable for touch-screen tablet PC
OR34-VS targets bump test, roving impact
hammer, order extraction, vibration
monitoring and data collection.
Mobi-Pack is the right choice for measurement
in harsh environments (mud, oil, rain) without
impacting the OROS instrument.
Cascadable
… With a comfortable computing power and their
built-in Mobi-Disk, OR36 & OR38 faces any
measurement situation. They offer the capability of
an advanced laboratory instrument in a modular,
rugged and portable package.
(2 to 10 systems)
Up to 10 systems may be
cascaded to increase the
channel count required
for flexible configurations.
100% plug and play,
the analyzers are simply
connected together with a
SmartRouter, the controller
unit, through a 1 Gb/s
Ethernet cable. All the
channels remain available
for full performance
analysis and recording,
thanks to the local
processing and data
storage disks.
13
-
Portable (8 kgs/18 lbs)
8 to 32 universal inputs
1 to 8 computation DSPs
Stand alone recorder (D-rec capable)
Internal battery
Signal conditioner expander module (Xpod) compatible
CAN bus interface
16
32 Number of channels
Specifications for Field Operations
Being portable is more than just a carrying case!
■
■
■
■
■
■
■
■
■
■
■
■
■
All inputs protected up to ±60 V
Internal battery
Aircraft cabin compatible carrying case
Double shielded chassis
Foolproof cooling inlets
Secured power supply connector
Bright LCD panel
Large and touchable operating buttons
Environment proof (Vibe, shocks and temp)
BNC connectors
Ethernet (up to 100 m away)
Power supply: AC (100 to 240 V) / 50-60 Hz / DC (10 to 28 V)
Grounded or floating couplings
Flexible
Managing Any Transducers
OROS 3-Series analyzers are designed to handle numerous transducer types without
additional gears. Inputs are compatible with:
■
■
■
■
■
■
ICP® accelerometers, force & microphone (2 or 4 mA)
Proximity probe & keyphasor with ±40 V range
Temperature, Torque, Power… parameter with universal and auxiliary DC inputs
Workshop/Ship/factory ground loops with Float coupling
Strain, Pressure, Thermocouples with the optional Xpod conditioner
High speed Tachometer & Torsional encoder with the integrated frequency
to voltage converter
XPods, Plug and Play Signal
Conditioning
14
The Xpod modules add signal conditioning to the
OR36 and OR38 in a smart and field operation driven
design. These 8 channel conditioners can be added,
removed and exchanged between the analyzers in a
few seconds. Moreover, the lateral side clipping, leaves
the BNC input connectors free to be used as classical
ICP®/AC/DC/Float inputs
■ Exchangeable between any OR36 & OR38
■ 5 sec docking time
■ BNC connectors still available
■ 8 inputs / modules > up to 32 channels
■ Rugged metal case
■ Monitoring LED on each channel
They are specifically adapted to mobile
measurements with special transducers
(temperature, strain, pressure, torque…)
XPods line: bridge
& temperature
conditioners
Wheatstone bridge
conditioner handles any
bridge-based transducers
(strain, pressure, load, torque,
force...).
- Full, ½ and ¼ bridge
- Automatic bridge balance
(incl. in D-rec)
- 120 Ω / 350 Ω built-in
resistors
- Continuous 0 to 10 V
excitation voltage
Temperature conditioner
handles thermocouples and RTD
transducers.
- PT100, PT1000 and J, K, N,
E, T
- Integrated linearization
- Automatic cold junction
compensation
- Standard flat pin connectors
CAN Bus
A CAN interface may be plugged on the rear panel of the OR36, OR38 and Mobi-Pack.
It allows acquiring live parametric data from a car or machine’s CAN bus.
■ CAN2a & CAN2b
■ 125 kb/s to 1 Mb/s
■ Rugged Hi-z probe
PC Free Operations
Stand-Alone Recorder
(D-rec Recording)
The D-Rec option turns the OR36, OR38 and
Mobi-Pack into a stand-alone digital data
recorder. The unique front-panel with its bright
LCD and accessible buttons offers freedom of
direct set up, without a PC or PDA. It is easy
to select inputs, modify front-end settings
(coupling, range, etc...) or change the bandwidths.
Up to 12 user-defined recording configurations
can be saved in the instrument. They can be loaded
either from the control panel or automatically
(routed acquisition).
■ 100% PC or PDA free - Secured data recording Bright LCD and large buttons - Compatible with
CAN, Xpod, Universal inputs
D-rec offers a unique way of using the analyzer
for operations usually devoted to DAT recorders.
Mobi-Disk
The Mobi-Disk is the local
storage device for OR36, OR38
and Mobi-Pack. This removable
device enables each engineer
to keep its own raw data.
Connected to the PC through
the USB port it allows fast
and easy post-processing of
recorded data.
- 60 GB shock proof disk
- Dual port (USB 2.0 & analyzer
slot)
- High throughput
(32 ch x 51.2 kS/s)
Solid-state version for high
vibration levels
Satellite: Remote and Autonomous
System for Temporary Monitoring
Fixed on top of the analyzer, the controller unit (SmartRouter) makes
the analyzer totally independent from the Ethernet connection and
operator presence. This set works as a stand alone system.
■ Shut-down/restart management - 50 GB local disk - Internal battery
(1h30 min) - High readability LCD screen
Telediagnostic: The system can be controlled through an internet connection.
All the OROS analysis tools are then available for diagnostics.
Transient event capture: SysTeo can take total control of the system even
for periods as long as months. Providing the monitoring history and the
detection of various events, the software is dedicated to transient event capture.
Dock-Pack, the Field Station
The field offers a tough environment for measurement systems: rain, humidity, oil mist, air leaks,
etc… The Dock-Pack is a one-entry power station where all the measurement system
components are packaged and protected (OROS 3-Series analyzers, SmartRouter,
tachometer conditioning, Xpods, PC etc …).
■ Integrated PC and tachometer power supply
■ Lock pad for preventing breaking into the unit
Autonomy
The OROS 3-Series analyzers are designed to manage multiple power supply issues faced during
field operation. In addition to the internal battery and AC/DC power, they feature several external,
swappable battery models providing up to 8 hours of operation. For continuous acquisition in
benches and remote diagnostics, the analyzer automatically restarts on power recovery or can
be remotely powered on or off.
15
Flexible
Large Channels Count Applications
VibeMaster: the Solution for Acquisition, Recording
and Real-Time Analysis, up to 320+ Channels
16
VibeMaster is a scalable networking
solution for the 3-Series analyzers.
It answers any large channel
count application with its
flexible configurations:
from hundreds of channels
stacked into racks to any
number of channel nodes
distributed along a large
structure. VibeMaster
increases the covered area
and utilizes the processing
capabilities of the networked
analyzers.
The whole system is monitored
and controlled by NetGate, the
supervisor software, as easy
as having a unique front-end.
NetGate provides clear, fluid
and intuitive control/command operations
through its multi-screen interface. Dedicated
to noise and vibration analysis, VibeMaster brings
up the renowned OROS analyzers accuracy,
real-time capability and analysis modes in large
channel requirements for both mobile or fixed
test bench applications.
320+ simultaneously sampled channels per channel
Records and analyzes up to 40 kHz
■ Sampling synchronization (2° @ 20 kHz)
■ NetGate supervisor software
■ Multi-tasks
■
■
Accurate
Focusing on
measurement quality
and efficiency, OROS
design takes care
of every part of the
instrument, preventing
interference from
internal and external
perturbations. It results
in an instrument that
provides precise,
exact and perfectly
reproducible results.
DSP-Based Architecture
The Need for Real-Time
Every part of the signal contains important signatures
hidden by non real-time analyses. Live synchronous order,
1/n octave and filtering are not possible without gap free
analysis capability. Real-time analysis helps getting actual
data on-line.
Thanks to this DPS-based architecture, OROS 3-Series
analyzers provide the same measurement and analysis
performance whatever the number of channels or
bandwidths.
DSP is Your Data Security Passport
Many dynamic signal analyzers get their signal processing
power from the PC’s processor(s). The undeterministic
behavior of PC operating systems (not real-time) may
rapidly lead to loss of samples while the duty increases.
Our DSPs (Digital Signal Processor) are designed to
offer 100% controlled computation. They allow to know
the amount of analysis capabilities before starting the
acquisition.
OROS 3-Series analyzers run the real-time analysis
exclusively with their 32-bit DSP bank.
■
■
■
Local and scalable (1 to 8) computation DSPs
for analysis (FFT, SOA, 1/n OCT...)
A Master processor handling trigger, monitoring,
generators and tachometers
A disk manager devoted to the true parallel raw
data recording
The Best of Electronics for Metrology
The analyzer inputs must properly accept the transducer
input signals. They must be properly designed.
■ High dynamic range: 24 bits Δ ∑ / 120 dB (130 typ.)
■ Wide voltage range: ±100 mV to ±40 V
■ Precise phase matching: < ±0.02° @ 20 kHz
■ Multiple frequencies: 2 sampling clocks 102.4 kS/s
and 65.536 kS/s with sub multiples
■ Accurate: < ±0.02 dB amplitude match
■ Stable: < ±0.1 mV offset drift recording
17
Open and Customizable Platform
Automation
For several applications, the same measurement procedures have to be repeated to compare each acquisition.
A tool panel, including macro edition and sequencer, is available to create automatic procedures.
Integration
On test benches, the instrument needs to be integrated into existing equipments and database.
The OROS 3-Series analyzers are made for these advanced requirements.
NVDrive, the language to drive NVGate
from an external application:
MatDrive, the language to drive NVGate
from MATLAB®:
- Allows full remote-control of NVGate using
- Allows the control of OROS 3-Series analyzers by MATLAB®
- Uses a set of MATLAB® functions available as “open source”
- Generates results directly available in MATLAB®
- Uses NVDrive
an external software package (configure project,
perform and publish results)
- Uses a TCP/IP remote programming interface
to control any analyzer feature
- Provides commands listed in the NVDrive library
Sequencer:
18
Write the list of settings to be
updated at each acquisition
into an Excel sheet.
The analyzer follows this road
map, faithfully reproducing
your sequence.
Macros:
Simply record the actions
and then insert algorithmic
controls with the graphic
editor
Control Panel:
Customize this area with
settings, macro access or
plug-in status
Import/Export in
Compatibility
- uff
- txt
- mat
- wav
- sdf
The following software is
compatible with OROS format,
- FAMOS
- ME’scope
- GlyphWorks
- DynaWorks®
- DynamX®
The OROS Customer Care Department is always at your side for your specific application.
Boost Your Measurement Efficiency
As specialist in
noise and vibration
measurements, OROS
relies on a wide
network of qualified
partners and experts
to help you approach
and solve your noise
and vibration issues.
A Professional Team at your Service
The OROS Customer Care Department
Paying the greatest attention to our customers’ satisfaction, OROS devotes a dedicated
department, the Customer Care Department, to ensure the best use of our technology.
The dynamic and responsive team closely works with all the OROS experts: technical,
R&D, manufacturing, marketing and sales.
Global Accredited Maintenance Centers
With a worldwide coverage (China, Europe, India, Japan, South Korea, USA), OROS is
in close proximity to its customers, reducing maintenance downtime. Technicians are
certified on a regular basis by OROS specialists, enabling them to repair, calibrate and
upgrade all OROS systems.
Managing Your Noise and Vibration Tests and
Measurements
■
■
■
■
■
Initial Training: setup, installation and basic knowledge
Advanced Training: learn the full knowledge on specific functions
Customized application with our specialists and network of qualified partners
Assistance in your measurement: Optimize the use of the system for on-site
measurement - Audit and recommendation for data analysis and management
Expertise in diagnostics
19
Ensuring the Best Use of the OROS Technology
Premium Contracts
1, 2 or 4 years renewable contracts (in addition to the 1 year included warranty)
■ Satisfied or exchanged*
■ Hotline (Help-desk support)
■ Full coverage of your analyzer and its options
■ Guaranteed turn around time for hardware repairs and calibration
■ Access to your personal myOROS section to download software updates
■ Calibration reminders
■ Courtesy loan of a replacement instrument (same range or higher) in case of delay
overdue
■ Priority processing in maintenance center facilities
■ Privileged access to extended services at a preferential rate: urgent loan
within 1 day, etc.
*During the first 3 months
Additional Services
■
■
■
■
■
Software Updates: Additional modules, Latest version releases, Additional licenses
Hardware Upgrades: Channels, DSPs, Accessories
Calibration: NFX07-011 compliant
Diagnosis and Repair
Rental: Analyzer, Software modules
General Specifications
Instruments
20
| OR34
| 2/4
| BNC
| Dynamic
|2
|1
||-
Inputs
Sampling
Accuracy
Conditioning
Xpod
Filtering
| 2 kS/s to 65.536 kS/s or 102.4 kS/s - 24 bits delta sigma ADC
| Phase ±0.02° - amplitude ±0.02 dB - Dynamic > 120 dB
| AC/DC/ICP®/TEDS/Float - ±17 mV to ±10 V
| AC/DC/ICP®/TEDS/Float - ±17 mV to ±40 V
| No
| No
| Supported
| No
| High/Low Pass - Stop/Pass band – Integrator (simple/double) – Differentiator – A/C/Z
Auxiliaries
Outputs
Ext. synch (Trigger / Tach)
DC channels*
| DC to 40 kHz - ±10 V range - 24 bits DACs -THD < 0.002%
| 64 x over sampled - Resolution < 160 ns (0.06° @ 1 kHz) - ±10 V range (±40 V on OR36, Mobi-PackTM & OR38)
| Sampling 10 Hz - 50 Hz/60 Hz rejection - reproducibility <1 mV
System
Hard disk
Processors (DSP)
Internal battery
Power supply
Link to PC
Weight
Dimensions (w.h.d) mm
Dimensions (w.h.d) inches
| PC
| PC
|1
| 1 or 2*
| 15 min
| 1h30 min
| AC (100 V to 240 V) / DC (10 V to 28 V)
| 100 Mbit/s Ethernet - 3 m cable
| 1.4 kg/3 lbs
| 2.8 kg/6.2 lbs
| 163 x 54 x 215
| 254 x 67 x 232
| 6.4” x 2.1” x 8.4”
| 10” x 2.6” x 9.2”
Systems cascade
Channels
Connections
Operations
*optional features
| OR35
| 4/6/8
| BNC and Lemo*
| Dynamic
|2
|2
|4
|-
| OR36
| 4/8/12/16
| BNC
| Universal
| 2 (+4*
| 2/4
| 2/4
| Blocks of 4
| Mobi-PackTM
| 4/8/12/16
| BNC
| Universal
| 2 (+4*)
| 2 (+4*)
| 2/4
| Blocks of 4
Front end
Inputs
Connectors
Type
Ext. Sync (Triggers/Tach)
Outputs
Auxiliary DC channels*
DC channels*
| OR38
| 8/16/24/32
| BNC
| Universal
| 2 (+4*)
| 2 (+4*)
| 2/4
| Blocks of 8
| Supported
| 60 GB removable
| 1 or 4*
| 30 min
| 60 GB removable
| 1 or 4*
| 30 min
| 60 GB removable
| 1 or 8*
| 15 min
| 3 & 10 m cable
| 5.2 kg/11.5 lbs
| 114 x 280 x 350
| 4.5” x 11” x 13.8”
| 3 & 10 m cable
| 12 kg/26.5 lbs with
| 470 x 180 x 360
| 18.5” x 7” x 14”
| 3 & 10 m cable
| 8.2 kg / 18 lbs
| 114 x 410 x 350
| 4.5” x 16” x 13.8”
| Max systems: <32 - Max channels: 320 - Matching; Phase: < ±0.22° @ 1 kHz, Amp: < ±0.1 dB
| 1 Gb/s Ethernet network (analysis/monitoring) - BNC cable (Recorder only) - max 100m
| Up to 40 kHz analyses and recording - local disk storage - Parallel USB downloads
Accessories
SmartRouter (SAT/NET)
Type
Memory
Power supply
Interface
NET version
SAT version
Dimensions
Autonomous rugged controller unit – Runs OROS analysis software
50 GB HDD - 1 MB RAM - Store analyzer results and raw data
100/240 V AC, 10/28 V DC -1 h 30 battery - auto power-on on mains presence
2 Ethernet ports: 100 Mb/s & 1 Gb/s - RS232 - 4 USB ports - Wifi capable
Networker for remote analysis and cascade of analyzers
Satellite for tele-diagnostic and stand-alone acquisitions - Adding 8 digital I/O, 8 bright colors LED, 12/24 V power supply
Case: 67 mm (2.6”) x 254 mm (10”) x 232 mm (9.15”) - Weight: 2.7 kg (6 lbs)
Dock-Pack
Systems
Power
Conditioning
Accessories
Dimensions (w x h x d)
OR35 (+ SmartRouter), OR36(+ SmartRouter or XPods), OR38 (+ SmartRouter or XPods)
One power cable plug: AC (100V to 240V) / DC (10V to 28V) - 3 AC power outlet (for PC and other accessories)
2 tachometer conditioning modules
Lockable (TSA lock) PC compartment, in-operation articulated & lockable panels, rolling case, wet environments casing
625 mm (25.5”) x 345 mm (13.6”) x 480 mm (18.9”)
CAN bus interface (CAN)
Type
Standards
Probe
Capacity
CAN Bus Hi-Z probe and interface
CAN 2.0A & 2.0B – 125 kb/s to 500 Mb/s
Hi-Z Sub D 15 - 1.5 m and 5 m cable - Analyzer or Bus powered
24 ch - 12.5 to 16 Hz refresh rate - synchronous with dynamic analyses
Strain gauges (S XPod)
Type
Bridge type
Inputs
Excitation
Dynamic Wheatstone bridges conditioner extension module for OR36 and OR38
Full, Half, Quarter bridge - 120 Ω, 350 Ω built in completion resistors
8 dynamics (40 kHz) inputs - ±1 V and ±100 mV range, DC/AC coupling
continuous 0 to 10 V - 30 mA (0 to 4 V) / 12 mA (4 to 10 V) - Automatic balances
Temperature (T XPod)
Type
Parametric thermocouples and RTDs conditioner extension module for OR36 and OR38
NVGate® (software base)
Graphics
Graphical features
Windows management
Trace management
Zoom & translation
Scale management
Markers/cursors
Displays type
Time series
Narrow band
1/n Octave
Profiles
View meter
3D
1 to 16 Layouts - 1 to 32 windows/layout - 1 to 32 traces/window - automatic windows generation on channels activation linked cursors
between windows
Multi-trace - Multi-graph - Magnitude gathering - Memorization - saved/on-line trace overlay
Mouse driven X, Y or Z translation - Area/axis zoom - Adjustable X, Y, Z scale
Lin, log or dB Y scale - RMS, Pk, Pk-Pk, EU2, PSD, ESD and RMS PSD unit - acoustics weightings
Dual cursors with Dx/Dy- peaks and max automatic detection (interpolated) - adjustable labels, sideband, harmonic, power band and period
markers
Triggered, weighted and filtered blocks - File overview / Zoom - X/Y (lissajous)
Magnitude - Phase- Bode - Imaginary & real part - Polar - 3D cascade
1, 3, 12 and 24 band/octave - linear and weighted overall levels
RPM - DC - kurtosis - Orders - power band - overall- Time, RPM or DC X axis
Digital - Magnitude/phase - Continuous with colored alarms
Waterfall (narrow band/ 1/n Octave) - color spectrograms - sonogram - orthogonal or isometric views - XY, Yref,
order/freq extraction views - sections management
Data management
Project manager
Setups
Measurements
Projects
Load, save and recall workbook with: instrument setup, analysis setup, layouts, control panel, report setup - Generates models
Save selected results and raw data automatically - Direct recall of measurement setup - Recall, edit and save measurement views
Project manager tree - filters (date, keyword, owner) - allows direct access to saved results - manage multiple project databases - import
setups and measurement from files
Real-time analysis
The following real-time capabilities are guaranteed for one computation DSP. For higher specifications, additional DSP can be added
Performance per computaion DSP
Gap free recording
8 channels - 40 kHz - compressed format
Real-time FFT analysis
8 channels - 20 kHz - 401 lines or 6 channels - 40 kHz - 401 lines
Synchronous order analysis
4 channels - order max 100 - resolution 1/8th of order - 12 000 RPM - 20 kHz
Time domain analysis
8 channels - 40 kHz - no filtering
1/n Octave
4 channels - 25.6 kHz - 1/3rd Octave
Overall acoustics levels
8 channels - 25.6 kHz - All detectors activated
I/O functions
Tachs / keyphasor
Sources
Number
Settings
Frequency to voltage converter
(option)
Math combined tachometer
(option)
Pulses detection from ext. sync or inputs - virtual (compute gear ratio), DC level
4 tachs from input - 2 to 6 ext. tach - 4 fractionnal tach - 4 DC tachometers
Adjustable Signal filtering - pre-divider 2 to 1024 - averaging - pulse/rev
200 ns resolution - 1 to 1024 pulse/rev. - integrator and differentiator filter - smoother - 12 000 RPM max with 200 pulse/rev. - up to 6 inputs
Missing teeth management
RPM computation from 2 tachs - Editor with +,-,*, /, log, exp, power, sqrt and trigonometrical operators - Ideal for Continuously Variable
Transmission
Triggers
Edge
Level & delta level
RPM & delta RPM
Miscellaneous
From input or ext. synch - Adjustable threshold, Slope, Hold off, Hystersis, pre and post-divider
From input DC, RMS, Kurtosis pk, crest Factor or DC channel - Adjustable start, stop, delta levels and slope
From any tach - adjustable start, stop, delta RPM and slope - Interpolation
Manual - time period (2) - Combination (and, or, before) - generators steps, stabilization and burst - result availability from every plug-in
Generators
Pure tone
Noises
Swept sine
Play-back
2 independent fixed sine - 1 to 6 correlated fixed sine with sweep transition - amplitude and phase adjustable
4 uncorrelated random (white/pink) - 4 independent multi-sine - 2 chirp - Adjustable bandwidth, filtering, amplitude, phase, resolution and burst
1 to 6 simultaneous outputs - phase and amplitude offset - adjsutable sweep speed (lin/log), cycles, steps, frequency span and settling time
File (recorded/imported) - Inputs - Simultaneous with real-time analysis
Compatibility
Automation
Macros
Mask & Alarms
Sequencer
NVDrive®
Import / Export
Signal import (time series)
Result import (others)
Export
Report
Automate any NVGate® operation - Graphical editor - Records user operations - Algorithmic instructions - Interactive query management - Sub
procedures - Debug/log window
Mask editor for spectra (freq/order), profiles and 1/nth OCT - Dual mask (min/max) - Mask crossing alarms - Link to macro
imports acquisition setup sequences from Excel® - Sequence navigator (replay, jump to, pause) - Sequence editor (control applied settings)
TCP/IP language for control/command of NVGate® - Modifies setup - Collects data - injects result - Operates on-line and office modes Operates locally or through LAN/WAN
OROS wav - Audio wav (with frequency conversion) - UFF (58) - Txt
AE2 - TXT- Excel® (mask)
UFF - TXT - SDF – Matlab® - Audio wav - OROS wav
MS Word® - Excel® - Copy/paste WMF - on-line data refresh
21
General Specifications
Modules (software options)
The following modules (plug-ins) run independently. They operate simultaneously on any inputs with separate
bandwidths, averaging modes, triggering and filtering. (i.e. an input can be analyzed by the FFT
plug-in in the 2 kHz bandwidth while it is integrated and orders are extracted from it by the SOA plug-in)
Standard plug-ins
Recorder
Bandwidths
Tracks
Modes
4 independents bandwidth/record - 0.8 Hz to 40 kHz - Records DC channels at low rate - Records ext. synch at over sampled resolution Compressed (16 bits) or native (32 bits) formats - Throughput max: 6.4 Mb/s (32 ch. x 40 kHz)
Up to 32 tracks + 6 auxiliaries - Files can be divided by tracks and/or duration
Start to time - Start to stop - Time to stop (up to 2 GSamples) - Records on PC or on local disc - Multiple records on one files
Player
Modes
Tracks update
Playback on outputs - Post-analysis - Repeat mode
Sensibilities - Units - Labels - Adjustable duration and start offset
Monitor
Sources
Fixed setup
Detectors
4 channels - Hot plug of any input (do not stop real-time analysis/recording) - Dedicated DSP
401 lines - Hanning window - Spectral domain exponential averaging
Adjustable band-pass filter with by-pass - Adjustable averaging duration - DC, RMS, Min, Max, Pk, Pk-Pk, Crest factor and Kurtosis detectors
Waterfall
Stacks results from
Acquisition modes
Monitor (detectors) - FFT (power band, blocks, spectra, FRFs) - CBT and SOA (Orders, order spectra) - 1/n Oct (instantaneous, max & min
hold,averaged CPB spectra) - OVA (Leq, short Leq) - TDA levels (DC, RMS, Min, Max, Pk, Pk-Pk, Crest factor, Kurtosis)
One shot or continuous scrolling - Synchronized on any event or result availability - 1 to 100 000 slices - On-line 3D & color map displays
Optional plug-ins
The following plug-ins are optional. They can be ordered in addition to the chosen analyzer pack.
22
Narrow band spectra (FFT)
Bandwidths / Resolution
Averaging
Weighting window
Filters
Cross functions
Capacity
Others
DC to 40 kHz - 101 to 6401 lines - Simultaneous FFT Zoom (x 128)
Time (STA), Spectral or FDSA domains - Overlap (0 – 99.9%) - Linear, exponential, peak hold and ref peak hold modes
Hanning- Hamming - Kaiser Bessel - Uniform user define - Force & Response
HP, LP - BP, BS - integrator (simple and double) - Differentiator A and C laws - Independent on any channels
Cross spectra - FRF H1 & H2 - Coherence - Zoomed results - Full matrix (32 x 32) of cross functions available simultaneously
8 or 32 channels plug-ins - Up to 4 FFT plug-ins with independent setups
Adjustable band power tracking
Constant band order tracking (CBT) FFT Add-on
Tracked orders
1 to 8 independent orders tracked per channels - Adjustable frequency span
Tachometer
Any valid tachometer (ext. sync, inputs, virtual)
Capacity
Same as FFT
Others
Order extraction centered on nearest peak - cross phase tracking
Diagnostic FFT Add-on
Levels
Correlation
Demodulation
Cepstrum
Shaft-view
DC - Min/max - RMS - Peak - Peak to peak - Crest factor - Kurtosis - On any channels
Auto and cross correlation between any channels - instantaneous and averaged results - centered and left zero padding weighting windows
From any tach - adjustable start, stop, delta RPM and slope - Interpolation
Envelope demodulation signal- Simultaneously with spectra, zoomed spectra and envelope spectra
Unwrapped signal view along shaft profile - polar cursors - direct angle reading
Synchronous order analysis (SOA)
Type
Time domain re-sampling and interpolation function of tachometer
Span / Resolution
Max order 6.25 to 400 - 1 to 1/32 order resolution
Tracked orders
1 to 8 independent orders tracked per channels
Tachometer
Any valid tachometer (ext. sync, inputs, fractionnal), DC, Maths
Averaging
Angular or order domain - linear, exponential, peak hold and ref peak hold modes
Overlap
1 to 31 rev - in % of rev - phase correction to keyphasor reference
Multiple pulse/rev
1 to 1024 - spectrum at each new pulse - phase correction to keyphasor reference
Weighting windows
Hanning- Hamming - Kaiser Bessel - Uniform
Filters
HP, LP - BP, BS - Integrator (simple and double) - Differentiator - A and C laws - Independent on any channels
Capacity
8 or 32 channels plug-ins - 1 or 2 SOA plug-ins with independent setups and tachometer
Others
Adjustable band (order) power tracking - cross phase tracking - independent phase shift (± 720°) per channel
Time domain analysis (TDA)
Type
Levels
Signal view
Bandwidths
Filtering
Averaging
Capacity
Statistical extraction and view on time series
Real-time DC, RMS, min/max, kurtosis, peak, peak-to peak and crest factor view meters and profiles
Time base and duration independent on each channels - 320 ms to 110 hrs - relative or absolute time
Adjustable from DC to 40 kHz
HP, LP, BP, BS, integrator (simple and double) - Differentiator - A and C laws - independent on any channels
Exponential, linear, repeated linear, repeated on trigger
8 or 32 inputs
1/n Octave constant percentage band (OCT)
Type
Filter based - complies IEC 1260 & IEC 804
Averaging
Short Leq - Fast - Slow - Impulse - Linear - repeated
Weighting
A - B - C - D - 1/A - 1(A*D) - A*D - Wx(ISO 2631) - Wx (BSI6841)
Capacity
8 or 32 channels plug-ins
Others
Overall levels (linear & time weighted)
Overall acoustics levels (OVA)
Type
Integrated Sound level meter - complies IEC 60-672 - Delivers class 1 results
Bandwidths
10 Hz (adjustable filter) to 40 kHz
Detectors
1 peak / channel - 3 RMS time weighted detector / channel
Averaging / Weighting
Short Leq 1s and 1/8s - linear / A - C- Z (none) independent on any detector
Time filtering
Fast - Slow - Impulse independent on any detector
Capacity
8 or 32 channels plug-ins
Direct recording (D-rec)
Type
Capacity
Triggers
Setup
LCD panel settings
Data security
Stand-alone data recording option for the OR36, OR38 and Moby-Pack analyzers
Same as analyzer ones (32 ch @ 40 kHz - multi-records - multi-sampling - all record modes)
Periodic, level, edge detection, Ext. sync - pre/post-triggering
From NVGate or 100% PC free through LCD panel - 12 user define presets
Per input: coupling, range, add/remove - Sampling, record mode, bridge autozero
Power failure, disk extraction and failure proof - Automatic data recovery without PC - Time stamped records - Overload LED
Virtual inputs (VIN, VDC)
Type
Typical operations
Dynamic channels
Dynamic operators
Parametric operators
Real-time computation on time series from dynamic (VIN) and parametric (VDC) inputs
Time domain cross function, Vector components contribution, multi-transducers power, torsional twist, trigger on averaged/ratio signal
(A*IN+B)N and filter on each channel – A, B, N positive, negative, decimal ex: (2 * IN + 0.41)-1/2
Sum, Product, with general coefficient, offset and power - up to 12 ch per operator
Equation editor: +, -, *, ÷, pwr, sqrt, exp, logs (n, 10,2), trigonometry (arc, hyp), abs
Applications Software Modules
OROS Modal 2 (OM2)
Geometry
Data import/export
Impact hammer acquisition
Shakers acquisition
Modal Indicator Function
Stability diagram
ODS
EMA SIMO method
EMA MIMO 1 method
EMA/OMA broadband method
Validation
Geometry builder - import in UFF and IGES
UFF and Excel compatibility
Sequencer - FRF H1/H2, coherence- force/response window - double impact rejection - manual accept/reject
Multi excitation - sine/random/chirp excitation - hanning window
Based on Singular Value Decomposition - available in ODS, EMA and OMA modules
Automatic detection of structural modes
In time and frequency domain
Based on Rational Fraction Polynomial formulation of transfer function
Based on Frequency Domain Poly-Reference algorithm (FDPR)
Based on Polyreference Least Squares Complex Frequency algorithm (p-LSCF)
Modal Assurance Criterion
Advanced Swept Sine (A2S)
Frequency range
Frequency resolution
Control
Boosted mode
Results
From 0,01Hz to 40kHz, in 1 to 8 spans
Continuous sweep up to 80 000 points
Automatic control and limiting of generator output level at input or output of the system under test
To speed up the measurement
Frequency response, coherence, spectrum
NETGate
Type
Capacity
Operations
Displays
Supervisor software for parallel analyzers operations - Record & real-time analysis
10+ systems, 320+ channels - Dynamic inputs, XPod compatible - Plug & play
All NVGate analysis type - Copy/paste setup - Immediate results - automated time series download
8 WXGA displays – Unlimited channels grid view with level and status- View channel: one click focus (time + spectrum + level) – Chassis
analysis windows
23
Applications Software Modules
ORBIGate®
Multi Analysis
Project & data
Inputs
Tachs
Overview grid
Displays
Sampling type
Modes
GAP reference
Run-out
Reporting
Real-time analysis, based on Synchronous Order Analysis (SOA) + raw signal recording
Project, machine train and measurement management interface - Sensors set by angular steps of 1°
Proximity probes, velocimeters, accelerometers - Coupling: AC, DC, AC Float, DC Float, ICP®. Up to +/- 40V
Direct or undirect coupling (1 or 2 shafts per machine trains): simultaneous phase extraction
Measured, virtual (gear ratio based determination) or simulated tach
GAP V, GAP, Overall, Amplitude & Phase vectors: 1X, 2X, 3X, customizable nX (from Subharmonic to 100) Sub1X, Smax
Full Shaft Motion (shaft centerline, clearance and orbit), shaft centerline, overall orbit (up to 512 points), nX filtered orbit, Bode & polar plot,
trend (relative or absolute time x-axis), order and frequency spectrum, waterfall & cascade, time domain signal, shaft view, rotating speed profile
Delta time, Delta RPM, Delta RPM + Delta time, free run
Acquisition, post-analysis & navigation - on-line (connected to analyzer) or office (PC only) operation
Reference determination when shaft at bottom or at center
Vector run-out correction (complex spectrum correction)
Report batch generation and printing with Microsoft Word (ORBIGate V4) or Excel: graphics & legends Data export to ASCI
and Microsoft Excel.
Balancing
Procedure
Analysis
Inputs
Correction
Residual unbalance
Displays
Report
1 or 2 plane balancing for rigid rotor, trial weight method at steady state (not necessarily operating speed), trim balance
1X amplitude and phase determination: based on Synchronous Order Analysis (SOA) Accuracy ± 0.02dB, ± 0.02°
1 or 2 sensors per plane. Proximity probes, velocimeters, accelerometers. Coupling: AC, DC, AC Float, DC Float, ICP®. Up to ± 40V
Adding/retrieving weight, splitted correction weights on defined positions
ISO 1940-1 admissible residual unbalance determination at operating speed
Residual unbalance prognostic
Real-time polar diagram, correction display & correction chart
Overview balancing report
Sound Power
Sound Power
Sequencing
24
Calibration
Instrument standard
Modes
Display
Sound Mapping
Reporting
ISO 9614-1 point by point method, ISO 9614-2 scanning method, flowchart for criteria validation
Measurement sequence management - Sound intensity probe remote control (start, stop, pause, save)
Multi-spacer management
Pressure and phase calibration and correction
PRI (Pressure Residual Intensity) determination according to IEC 1043
Acquisition (connected to analyzer), office (PC Only)
Real-time octave & 1/3 Octave, FFT narrow-band analysis (sound pressure & intensity)
Pressure & intensity mapping, 2D or 3D, Isolevel plots & picture overlay in 2D
Sound power reporting
Systeo
Event detection
Starting conditions
Results
Event notification
Power safety
Extraction
Level, threshold, spectral mask
Rotating speed, DC level, digital input status, date
Historic presentation: envelope, spectra, overall level , DC values, rotating speed
SmartRouter’s LEDs & LCD screen control, time signal recording, email sending
Power cut and restart management
Profiles display (overall level, rotating speed,…) on a defined period.
Go Ahead …
OROS Representatives
OROS relies on a worldwide network of
authorized representatives. The OROS
products and services are marketed
worlwide in more than 35 countries.
Our representatives are carefully selected
for their knowledge and expertise in noise
and vibration analysis. They are regularly
trained and updated on OROS products.
>
Find your local reseller on www.oros.com
Q
OROS Subsidiaries, Q OROS Representatives
OROS Accredited Maintenance Centers
With worldwide coverage, our Maintenance Centers provide close proximity to our customers.
Technicians are certified on a regular basis by the OROS specialists.
25
China, Beijing
RAINFE
Tel. +86.10.670.82.454
Email : [email protected]
India, Mumbai
AMIL Limited
Tel. +91.22.391.835.64/65/68
Email : [email protected]
Europe
OROS
Tel. +33.4.7690.5240
Email : [email protected]
Japan, Tokyo
TOYO Corporation
Tel. +81.3.3279.0771
Email : [email protected]
South Korea, Seoul
South Korea, Seoul
MIRAE ENSYS
Tel. +82.2.6409.2690
Email : [email protected]
USA, Dulles
OROS Inc
Tel. +1.703.478.3204
Email : [email protected]
OROS Literature
Learn more on the OROS offer with our full range of documentation
(markets’ brochures, datasheets, …)
The OROS literature is available on www.myOROS.com, in your personal section.
Developing a network of co-operations with recognized
laboratories throughout the world, OROS offers the best
of the technology available on a global level.
MATLAB® is a trademark of Mathworks co. ICP® is a trademark of PCB piezoelectronics. Windows XP, Vista and 7, Word and Excel are trademarks of Microsoft Corp.
Keyphasor is a trademark of GE. FAMOS is a trademark of imc DataWorks. ME’scope is a trademark of Vibrant Technology. GlyphWorks is a trademark of nCode.
DynaWorks® is a trademark of Intespace. DynamX® and Systeo are trademarks of Dynae. NVGate®, NVSolutions®, NVDrive®, MatDrive®, ORBIGate® are trademarks of OROS SA.
specifications not binding - Design: designvisuel.com | Sara Baumgartner - Photo credits: No Comment, nb nota bene, gettysimage
For over 25 years, OROS’ designs and manufacturing have
been renowned for providing the best in noise and vibration
analyzers as well as in specific application solutions.
OROS is certified ISO9001 and subsequently all OROS
products are developed and qualified conforming a very
strict quality assurance process.
The mission of OROS is to be a supplier of high-end
instruments, empowering engineers and technicians to
improve testing performance and efficiency at all stages
of the product life: from development to production and
maintenance.
OROS products are marketed and supported in more
than 35 countries.
1
M002-103-1
www.oros.com
Noise & Vibration ANALYZERS
OROS
23 chemin des pres
Inovallee 4403
F-38944 Meylan Cedex
Tel: +33.811.70.62.36
Fax: +33.476.90.51.37
Mail: [email protected]
Web: www.oros.com
French Sales Office
Tel: +33.169.91.43.00
Fax: +33.169.91.29.40
Mail: [email protected]
Web: www.orosfrance.fr
OROS GmbH
Tel: +49.261.133.96.50
Fax : +49.261.133.96.49
Mail: [email protected]
Web: www.oros-deutschland.com
OROS Inc.
Tel: +1.888.200.OROS
Tel: +1.703.478.3204
Fax: +1.703.478.3205
Mail: [email protected]
Web: www.orosinc.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement