Painless Performance Race Car Kit 50001 Wire Harness, 50201, 50202 Switch Panel Instruction Manual

Below you will find brief information for Wire Harness Race Car Kit 50001, Switch Panel 50201, Switch Panel 50202. The 50001 10-Circuit Competition Wire Harness Kit is designed to give maximum output with the utmost reliability. The relays enable the switches to activate the circuit with low current (amperage) requirements for extended life of the switches and the system. The 50201/50202 Switch Panel Kit should contain the following items: The 50201 Switch Panel (to be mounted in-dash) or the 50202 Switch Box (for roll bar mounting).

PDF Download
Document
Painless Performance Wire Harness Race Car Kit 50001, Switch Panel 50201, Switch Panel 50202 Instruction Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • 10-Circuit Competition Wire Harness Kit
  • Relays enable switches to activate the circuit
  • Low current (amperage) requirements
  • Extended life of the switches and the system
  • Easy installation
  • General Motors-keyed steering column
  • TXL (cross-linked polyethylene), 600 volt, and 225ºf.
  • Standard automotive wire is GPT, 300 volt, 144º f.
  • Switch Panel (in-dash)
  • Switch Box (roll bar mounting)

Frequently asked questions

The kit is designed for easy installation, even if you have no electrical experience. It is used for vehicles with a General Motors-keyed steering column or other steering columns depending on the kit purchased.

Relays enable the switches to activate the circuit with low current (amperage) requirements, which extends the life of the switches and the system.

All wire is TXL (cross-linked polyethylene), 600 volt, and 225ºf. Standard automotive wire is GPT, 300 volt, 144º f. with PVC insulation.

The two SECTIONS of the 50001 10-Circuit Competition Wire Harness Kit are ACCESSORY SECTION B+ and INSTRUMENT PANEL SECTION.
Preparing document for printing…
0%