Daewoo | SV294 | Owner`s manual | Daewoo SV294 Owner`s manual

DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지A
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지1
Important Safeguards
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
‘dangerous voltage‘ within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and servicing instructions in
the literature accompanying the appliance.
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
WARNING:
Do not install this equipment in a confined space such as a bookcase or
similar unit.
NOTE TO CABLE/TV INSTALLER:
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
CLASSE 1
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
PRODUIT LASER
This reminder is provided to call the cable TV system installer’s attention to
Article 820-40 of the National Electric Code (U.S.A.). The code provides
guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of the cable entry as
practical.
CAUTION:
This DVD Recorder+VCR employs a Laser System. To ensure proper use of this product, please read this
owner’s manual carefully and retain for future reference. Should the DVD Recorder+VCR require maintenance,
contact an authorized service center. Use of controls, adjustments, or the performance of procedures other than
those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do
not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION:
The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as
vases, should be placed on the apparatus.
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are expressly approved in the instruction manual. The user
could lose the authority to operate this equipment if an unauthorized change or modification is made.
1
Downloaded From Disc-Player.com Daewoo Manuals
INTRODUCTION
CAUTION
DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지2
Important Safeguards
REGULATORY INFORMATION: FCC Part 15
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the product is operated in a residential installation. This product generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this product does cause harmful interference to radio or television reception, which can
be determined by turning the product off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the product and receiver.
- Connect the product into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC COMPLIANCE:
The responsible party for this product’s compliance is: Sensory Science, 7835 East McClain Drive, Scottsdale,
AZ 85260, USA.
SERIAL NUMBER:
The serial number is found on the back of the DVD Recorder+VCR. This number is for this unit only. You should
record requested information here and retain this guide as a permanent record of your purchase.
Model No. ___________________________________
Serial No. ___________________________________
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S
MANUAL AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE
REFERENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in
electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the
following procedures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1
Read these instructions.
3
All these safety and operating instructions
should be read before the product is operated.
2
Keep these instructions.
The safety, operating and use instructions should
be retained for future reference.
2
Downloaded From Disc-Player.com Daewoo Manuals
Heed all warnings.
All warnings on the product and in the operating
instructions should be adhered to.
4
Follow all instructions.
All operating and use instructions should be
followed.
DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지3
Important Safeguards
6
Do not use this product near water.
13 Unplug this product during lightning storms or
For example: near a bath tub, wash bowl, kitchen
sink, laundry tub, in a wet basement; or near a
swimming pool; and other areas located near
water.
14 Refer all servicing to qualified service personnel.
Clean only with dry cloth.
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners.
7
INTRODUCTION
5
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from overheating.
The openings should never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
manufacturer’s instructions have been adhered
to.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatuses (including amplifiers) that produce
heat.
9 Make sure that rating of your household
electricity supply matches that shown on the
back of your product.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the product.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
apparatus. When a cart is used,
use caution when moving the
cart/ product combination to avoid injury from
tip-over.
when unused for long periods of time.
Servicing is required when the product has been
damaged in any way, such as: Power-supply cord
or plug is damaged; liquid has been spilled or
objects have fallen into the product; the product
has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15 Do not connect the product to the power supply
if you have just moved it from a cold environment
to a warm room. This can lead to condensation
inside the product, which can damage it. Wait
for approximately 2 hrs for it to reach room
temperature.
16 Make sure the product is placed at least 4 inches
(10 cm) apart from other home appliances or
obstacles to ensure sufficient ventilation.
17 This product is designed to work continuously.
Switching if off does not disconnect if from the
power outlet. To disconnect if from the power
outlet you have to unplug it.
3
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지4
Table of Contents
INTRODUCTION
RECORDING
Important Safeguards _________________________1
Table of Contents ______________________________4
Overview ______________________________________5
Identification of Controls_______________________10
Basic Recording________________________________45
CONNECTIONS
Timer Recording _______________________________49
Recording from an External Input _____________51
Connecting Antenna/Cable ____________________15
Connecting a TV _______________________________16
Connecting an Amplifier/Receiver _____________18
Connecting Optional Equipment ______________19
Recording from TV
One Touch Record (OTR)
Checking the Recording Time
To Pause the Recording
One Touch Copy - DVD to VHS
One Touch Copy - VHS to DVD
45
46
46
46
47
48
EDITING
SETUP
Initial Installation ______________________________20
Initial Setup____________________________________22
Setup Menu Overview
Menu Navigation
INSTALLATION Settings
RECORDING OPTIONS Settings
LANGUAGE Settings
PREFERENCE / Video Settings
PREFERENCE / Audio Settings
PREFERENCE / Parental Controls
Various PREFERENCE Settings
System Information
Restore Defaults
22
22
22
25
26
27
28
30
32
34
34
On-Screen Display Overview __________________35
PLAYBACK
DVD Playback _________________________________38
VCR Playback _________________________________41
Other Disc Playback __________________________43
4
Downloaded From Disc-Player.com Daewoo Manuals
DISC Initialize __________________________________52
Disc Menu _____________________________________52
Title Menu _____________________________________56
Editing _________________________________________58
REFERENCE
Troubleshooting _______________________________60
Technical Specifications ________________________63
DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지5
Overview
What is a DVD?
DVD (Digital Versatile Disc) is a storage medium that combines the convenience of the compact disc with the
latest digital video technology. DVD video uses modern MPEG2 data compression technology that enables an
entire feature film to be stored on a single five inch disc.
How good is the resolution of DVD compared with VHS?
The razor-sharp digital images have more than 500 lines of resolution at 720 pixels per line. This is more than
twice as high as VHS and even better than laser disc quality. DVD picture quality is easily comparable to the
digital masters produced in recording studios.
What is a DVD+RW?
DVD+ReWritable uses ‘phase change‘ media, the same technology on which rewritable CDs are based. A highperformance laser is used to change the reflective properties of the recording layer; this process can be
repeated more than a thousand times.
What is a DVD+R?
Unlike a DVD+RW disc, a DVD+R (write-once DVD) can only be written to once. If it is not finalized after a
recording, further recordings can be added to it. Old recordings can be deleted but they can no longer be
overwritten. The deleted recordings (titles) are marked 'deleted title'.
Before a DVD+R can be played in a DVD player, it must be finalized in the DVD Recorder+VCR. Once this
process is complete, no further recordings can be added.
What can I do with my DVD Recorder+VCR?
Your DVD Recorder+VCR is a machine for recording and playing back digital video discs with ‘two-way‘
compatibility with the universal DVD video standard. This means:
• existing DVD video discs can be played on the recorder.
• recordings made on your DVD Recorder+VCR can be played on other DVD video players and DVD-ROM
drives.
Regional code
1
ALL
If the region number on your DVD disc does not correspond to the region
number of this player, the disc cannot be played.
5
Downloaded From Disc-Player.com Daewoo Manuals
INTRODUCTION
DVD, DVD+R, DVD+RW?
DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지6
Overview
Which discs you can use
The following discs can be used in your DVD Recorder+VCR:
Playback and recording
DVD+RW (Digital Versatile Disc + ReWritable)
DVD+R (Digital Versatile Disc + Write-Once)
Playback only
DVD Video (Digital Versatile Disc)
DVD-R (DVD-Recordable): These discs can only be played back if the recording was made in ‘Video mode‘ and
the recording was finalized.
DVD-RW (DVD-Rerecordable): These discs can only be played back if the recording was made in ‘Video mode‘
and the recording was finalized.
Audio CD (Compact Disc Digital Audio)
CD-R (CD recordable) Audio/ MP3 files
CD-RW (CD rewritable) Audio/ MP3 files
• Not all recordable CDs may be played by your player.
Disc-related Terms
Title (DVD only)
The main film, accompanying feature content, or music album. Each title is assigned a title reference number
enabling you to locate it easily.
Chapter (DVD only)
Sections of a movie or a musical piece that are smaller than titles. A title is composed of one or several
chapters. Each chapter is assigned a number to enable you to easily locate the chapter you want. Depending on
the disc, chapters may not be labeled.
Track (Audio CD only)
Sections of a movie or a musical piece on an audio CD. Each track is assigned a number, enabling you to easily
locate the track you want.
6
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지7
Overview
• The recording times shown are not exact because the DVD Recorder+VCR uses variable bit-rate video
compression. This means that the exact recording time will depend on the material being recorded.
• When recording a TV broadcast, if the reception is poor or the picture contains interference, the recording
times may be shorter.
• Discs recorded at high speeds (equal to or greater than 2X) may not be recognized.
• If you record still pictures or audio only, the recording time may be longer.
• The displayed times for recording and time remaining may not always add up to the exact length of the
disc.
• The available recording time may decrease if you heavily edit a disc.
• When using a DVD+R disc, you can keep recording until the disc is full, or until you finalize the disc. Before
you start a recording session, check the amount of recording time left on the disc.
Recording TV Audio Channels
The DVD Recorder+VCR can record one or two channel audio. For TV broadcasts, this usually means mono or
stereo, but some programs are broadcast with a main and a SAP (Secondary Audio Program) audio channel.
You can record either the main audio or the SAP audio.
Restrictions on Video Recording
• You cannot record copy-protected video using this DVD Recorder+VCR. Copy-protected video includes DVDVideo discs and some satellite broadcasts. If copy-protected material is encountered during a recording,
recording will pause or stop automatically and an error message will be displayed on-screen.
• Video that is ‘copy-once only’ can only be recorded using DVD+RW discs with CPRM.
Copyright Notice
• Audio and video recordings you make using the DVD Recorder+VCR are for your personal use only. You may
not sell, lend, or rent them to other people.
• This product incorporates copyright protection technology that is protected by method claims of certain
U.S.patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
corporation. Reverse engineering or disassembly is prohibited.
7
Downloaded From Disc-Player.com Daewoo Manuals
INTRODUCTION
About DVD Recording
Notes on Recording
DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지8
Overview
Precautions
Handling the Unit
When shipping the unit
The original shipping carton and packing materials come in handy. For maximum protection, re-pack the
unit as it was originally packaged at the factory.
When setting up the unit
The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position
the unit away from the TV, VCR, or radio, or turn off the unit after removing the disc.
To keep the surface clean
Do not use volatile liquids, such as insecticide spray, near the unit. Do not leave rubber or plastic products
in contact with the unit for a long period of time. They will leave marks on the surface.
Cleaning the Unit
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild
detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage
the surface of the unit.
To obtain a clear picture
The DVD Recorder+VCR is a high-tech, precision device. If the optical pick-up lens and disc drive parts are
dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after
every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your
nearest dealer.
Remote Control Operation Range
Point the remote control at the remote sensor and press the buttons.
Distance: Within 23 ft (7 m) of the remote sensor.
Angle: Within 30° in each direction of the remote sensor.
Remote Control Battery Installation
Detach the battery cover on the rear of the remote control, and insert two AAA
batteries. Make sure the polarities (+ and -) are aligned correctly.
Caution
Do not mix old and new batteries. Never mix different types of batteries (standard,
alkaline, etc.).
8
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지9
Overview
INTRODUCTION
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the disc by the edges
so that fingerprints will not get on the surface. Do not stick paper or
tape on the disc.
Storing Discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct
sunlight, as there may be a considerable temperature increase inside the car.
Cleaning Discs
Fingerprints and dust on the disc can cause poor picture quality and
sound distortion. Before playing, clean the disc with a clean cloth.
Wipe the disc from the center outward.
Do not use strong solvents such as alcohol, benzine, thinner,
commercially available cleaners, or anti-static spray intended for older
vinyl records.
Yes
No
About Symbols
About the
Symbol
‘ ‘ may appear on the TV screen during operation. This icon means the function explained in this User's Guide
is not available on that specific disc.
9
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지10
Identification of Controls
Front Panel
!
@
^ &*() 1
#
2
! POWER
Turns the DVD Recorder+VCR on and off.
Lock/Unlock the front panel and Remote control
by pressing and holding it over 5 seconds.
@ Cassette Compartment (VCR deck)
Insert a video cassette here.
# EJECT (VCR)
Ejects the tape in the VCR deck.
$ Disc Tray (DVD deck)
Insert a disc here.
% EJECT (DVD)
Opens or closes the disc tray.
^ ONE TOUCH COPY
Copies from DVD to VCR (or from VCR to DVD).
& PLAY/PAUSE
Starts playback of a disc or tape. Pauses playback
or recording temporarily.
* STOP
Stops playback.
( REW
DVD: Skips to previous chapter.
VCR: Rewinds the tape during Stop mode. Press
during Play mode for fast reverse picture search.
10
Downloaded From Disc-Player.com Daewoo Manuals
$
3 4
%
5
) FF
DVD: Skips to next chapter.
VCR: Advances the tape during Stop mode. Press
during Play mode for fast forward picture search.
1 DVD/VCR
Toggles control between the DVD deck and the
VCR deck.
2 Front Panel Display
Shows the current status of the DVD
Recorder+VCR.
3 CH †/…
Scans up or down through memorized channels.
Also moves up and down in DVD navigation
menus.
4 REC
Starts recording. Press repeatedly to set the
recording time. Lights red when the DVD
Recorder+VCR is recording.
5 LINE 1 (VIDEO, L-AUDIO-R)
Connects to the audio/video output of an external
source (VCR, Camcorder, etc.).
DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지11
Identification of Controls
INTRODUCTION
Front Panel Display
! @
# $ % ^
3 4
! Indicates a VHS tape is inserted in the VCR deck.
@ Circle : Indicates the VCR is recording.
Clock : Indicates a VCR Timer Recording is set.
# Indicates that a stereo broadcast is being
received.
$ Indicates when a Second Audio Program (SAP)
broadcast is being received.
% Indicates when the DVD Recorder+VCR is playing
or recording a tape with Hi-Fi sound.
^ Indicates the DVD Recorder+VCR is in TV mode
(as set by the TV/VCR button).
& Indicates the current Repeat mode.
* Indicates when the DVD Recorder+VCR is locked.
( Indicates when the DVD Recorder+VCR is
outputting the video signal in Progressive Scan
mode.
) Disc Type indicators
Indicates the type of disc loaded.
&
* (
5
)
1 2
6
1 Circle : Indicates a DVD+R(+RW) is recording.
Clock : Indicates a DVD Timer recording is set.
2 Indicates a disc is inserted in the DVD deck.
3 Indicates the current Recording mode.
4 Indicates AM or PM.
5 Front Panel Display Message
Indicates clock, total playing time, elapsed time,
remaining time, title number, chapter/track
number, channel, VCR counter, etc.
6 DTS: Indicates a DVD is playing with a DTS
soundtrack.
Dolby : Indicates a DVD is playing with a Dolby
Digital soundtrack.
11
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지12
Identification of Controls
Remote Control
Turns the DVD Recorder+VCR on and off.
- Opens and closes the disc tray in DVD mode.
- Ejects the tape in the VCR deck in VCR mode.
Switches the view on your TV to the DVD Recorder+VCR tuner.
Selects DVD mode.
Selects VCR mode.
- Selects numbered options in menus.
- Selects TV channels.
- Manually adjusts tracking.
Switches between the DVD Recorder+VCR tuner and your TV tuner.
Switches the DVD Recorder+VCR input to Tuner, LINE1, LINE2
Accesses DVD disc menus.
Displays or exits the Setup menu.
Displays information about the currently loaded disc, VHS tape, or TV
channel.
Edits chapters or splits titles of DVD+R(+RW) discs.
- œ √…† : Selects menu options.
- CH(+/–) : Selects channels.
Confirms menu selections.
Increases or decreases the slow motion speed when playing a DVD or VHS
tape.
Skips to the next or previous chapter/track.
- DVD: Searches backward/forward.
- VCR: Rewinds/advances during Stop mode. Press during Play mode for
fast reverse/forward picture search.
Starts recording. Press repeatedly to set the recording time. For more
details, Refer to One Touch Record (OTR) on page 46.
- Starts playback.
- Pauses playback or recording temporarily. Press again to exit Pause mode.
Stops playback or recording.
12
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지13
Identification of Controls
Selects an audio language (DVD), audio channel (CD) or audio type (TV).
Selects a subtitle language, if available.
Selects a DVD camera angle, if available.
Enlarges the DVD video image.
Repeats the current chapter, track, title or the entire disc.
Repeats playback between two points (A and B).
Searches for a specific title or a chapter.
Press and hold for 3 seconds to switch between Progressive Scan and
Interlace Scan mode.
Displays a disc’s Title menu, if available.
Resets the tape counter in VCR mode.
Displays the Timer Recording menu.
Progressive Scan Mode
• If your TV supports Progressive Scan, you can view high quality video by setting the
DVD Recorder+VCR to Progressive Scan mode. If your TV does not support
Progressive Scan, do NOT change to Progressive Scan mode.
If you do so accidentally, press and hold the [P.SCAN] key for 3 seconds to restore
normal viewing.
13
Downloaded From Disc-Player.com Daewoo Manuals
INTRODUCTION
Selects Recording mode: - DVD : HQ (1hr), SP (2hrs), EP (4hrs) or SLP (6hrs).
- VCR : SP or SLP.
DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지14
Identification of Controls
Rear panel
!
@#
$%
^
DVD & VCR OUT
OUT
AUDIO OUT COMPONENT OUT
Pr
R
ANT. IN
LINE 2
R
AUDIO
S-VIDEO
OUT
Pb
L
L
COAXIAL
Y
DIGITAL
AUDIO OUT
( *
! AC Power Cord
Plug into a power outlet.
@ AUDIO OUT (L, R)
Connect to a TV or other equipment with audio
inputs.
# COMPONENT/PROGRESSIVE VIDEO OUT (Y Pb Pr)
Connect to a TV with Component Video (Y Pb Pr)
inputs.
$ AV OUT (VIDEO, L-AUDIO-R)
Connect to a TV with video and audio inputs.
% LINE2 (VIDEO, L-AUDIO-R)
Connect to the audio/video outputs of an external
source (VCR, Camcorder, etc.).
VIDEO
RF OUT
&
^ RF IN (FROM ANT.)
Connect to your antenna or cable TV outlet.
& RF OUT (TO TV)
Connect to a TV with an RF coaxial input.
* COAXIAL (Digital Audio Out)
Connect to an amplifier with a coaxial digital
audio input.
( S-VIDEO OUT
Connect to a TV with an S-Video Input.
Caution
• Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage
to the DVD Recorder+VCR.
14
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지15
Connections
• Make sure the DVD Recorder+VCR is connected directly to the TV, and the TV is set to the correct video input.
• Do not connect the DVD Recorder+VCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.
• Do not connect the DVD Recorder+VCR via your VCR. The DVD image could be distorted by the copy protection
system.
Connecting Antenna/Cable
1
Disconnect the antenna/cable from the rear of your
TV.
2
Connect this cable to the jack marked RF IN (FROM
ANT.) on the rear panel of the DVD Recorder+VCR.
Antenna
Antenna
Cable TV
Wall Jack
Flat Wire
(300 ohm)
300/75 ohm
Adaptor
(Not supplied)
OR
OR
DVD & VCR OUT
OUT
AUDIO OUT COMPONENT OUT
Pr
R
ANT. IN
LINE 2
R
AUDIO
DEO
T
Pb
L
L
COAXIAL
Y
DIGITAL
AUDIO OUT
Cable Service Without Cable Box
VIDEO
RF OUT
Rear of DVD Recorder+VCR
If your cable wire is connected to your TV without a
converter or descrambler box, unscrew the wire from your TV and attach it to the RF IN (FROM ANT.) jack on the
rear panel of the DVD Recorder+VCR.
Use the supplied coaxial cable to connect between the DVD Recorder+VCR’s OUT (TO TV) jack and the antenna
input jack on your TV. With this connection, you can receive all midband, superband, and hyperband channels
(all cable channels).
Cable Service With Cable Box
Cable TV
Wall Jack
If a cable box is required in your cable system, follow
the instructions shown at right. This hookup permits
both TV and DVD Recorder+VCR operation.
Back Panel of
Typical Cable Box
To view or record a CATV channel:
1
2
3
Tune the TV to the correct video input channel.
Set the DVD Recorder+VCR to the output channel of
the cable box using the [CH …/†] or the [0-9] keys
on your DVD Recorder+VCR (e.g., CH3).
Select the channel you wish to view on the cable
box.
DVD & VCR OUT
OUT
AUDIO OUT COMPONENT OUT
Pr
R
ANT. IN
LINE 2
R
AUDIO
EO
T
Pb
L
L
COAXIAL
DIGITAL
AUDIO OUT
Y
VIDEO
RF OUT
Rear of DVD Recorder+VCR
• If you are using a cable box to tune channels, it is not necessary to run Auto Channel Search as indicated on page
23.
15
Downloaded From Disc-Player.com Daewoo Manuals
CONNECTIONS
Caution
INTRODUCTION
• There are a variety of ways to connect the DVD Recorder+VCR to your TV and other equipment. Use only one of
the connections described below. Whichever TV connection you use will work with all input sources.
• Please refer to the manuals for your TV, VCR, stereo system, or other devices as necessary to make the best
connections.
• For better sound reproduction, connect the DVD Recorder+VCR’s AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo, or audio/video equipment. See ‘Connecting an Amplifier/Receiver‘ on page 18.
DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지16
Connections
Connecting a TV
Choose one of the following TV connections, depending on the capabilities of your equipment.
All video signals are available from all video outputs. That means that whichever TV connection you use, it will
work with all input sources, including VHS out of the Component/Progressive Video Output.
RF Coaxial Connection
Rear of TV
Connect the RF OUT (TO TV) jack on the DVD
Recorder+VCR to the antenna in jack on your TV using
the supplied coaxial cable (R). If you use this
connection, tune your TV to the DVD Recorder+VCR’s
RF output channel (CH 3 or 4).
How to set the DVD Recorder+VCR’s RF output channel
S-VIDEO
INPUT
VIDEO
INPUT
COMPONENT/PROGRESSIVE VIDEO INPUT
Pr
S
C
L
V
ANTENNA
INPUT
AUDIO INPUT
Y
Pb
R
A
R
Press [SETUP] and select Installation ➝ Modulator
Out to change the RF out channel. For details refer to
page 24.
Audio/Video Connection
1 Connect the VIDEO OUT jack on the DVD
Recorder+VCR to the video in jack on your TV
using the supplied video cable (V).
2
DVD & VCR OUT
OUT
AUDIO OUT COMPONENT OUT
Pr
R
ANT. IN
LINE 2
R
AUDIO
S-VIDEO
OUT
Pb
L
L
COAXIAL
DIGITAL
AUDIO OUT
Y
VIDEO
RF OUT
Rear of DVD Recorder+VCR
Connect the Left and Right AUDIO OUT jacks
from the DVD Recorder+VCR to the left/right audio in jacks on your TV using the supplied audio cables (A).
S-Video Connection
1 Connect the S-VIDEO OUT jack on the DVD Recorder+VCR to the S-Video in jack on your TV using an SVideo cable (S).
2
Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on
your TV using the supplied audio cables (A).
Component Video Connection
1 Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder+VCR to the corresponding
input jacks on your TV using a Y Pb Pr cable (C) if the Component Video jacks (Y, Pb, Pr) are available on
your TV.
2
Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on
your TV using the supplied audio cables (A).
16
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지17
Connections
Progressive Scan Connection
• If your television is a high-definition or ‘digital ready‘ television, you may take advantage of the DVD
Recorder+VCR’s Progressive Scan output for the highest video resolution possible.
• If your TV does not accept the Progressive Scan format, the picture will appear scrambled.
Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder+VCR to the corresponding
in jacks on your TV using an optional Y Pb Pr cable (C).
2
Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on
your TV using the supplied audio cables (A).
• Be sure to set the DVD Recorder+VCR to Progressive Scan mode by pressing and holding [P.SCAN] for 3 seconds
(or changing the Scan Mode in the Setup Menu; see page 27).
• Progressive Scan does not work with the RF, Audio/Video or S-Video connections.
17
Downloaded From Disc-Player.com Daewoo Manuals
CONNECTIONS
1
DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지18
Connections
Connecting an Amplifier/Receiver
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/Pro Logic
Connect the Left and Right AUDIO OUT jacks on the DVD Recorder+VCR to the left and right audio in jacks on
your amplifier, receiver, or stereo system, using the supplied audio cables (A).
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped
with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)
1
Connect the DVD Recorder+VCR’s DIGITAL AUDIO OUT jack (COAXIAL X) to the corresponding in jack on
your amplifier. Use an optional digital coaxial audio cable.
2
You will need to activate the DVD Recorder+VCR’s digital output; see ‘AUDIO Settings‘ on page 28.
Digital Multi-Channel Sound?
A digital multi-channel connection provides the best sound quality. For this you need a multi-channel
audio/video receiver that supports one or more of the audio formats supported by your DVD Recorder+VCR
(MPEG 2, Dolby Digital, and DTS). Check the receiver manual and the logos on the front of the receiver.
• Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is
selected.
• If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce
a strong, distorted sound or no sound at all.
• 5.1 channel digital surround sound via the digital connection can only be obtained if your receiver is equipped with
a digital multi-channel decoder.
• To see the audio format of the current DVD on the on-screen display, press [AUDIO].
The DVD Recorder+VCR does not perform internal (2- channel) decoding of DTS sound tracks. To enjoy DTS multichannel surround, you must connect the DVD Recorder+VCR to a DTS compatible receiver via one of the DVD
Recorder+VCR’s digital audio outputs.
Rear of DVD Recorder+VCR
DVD & VCR OUT
OUT
AUDIO OUT COMPONENT OUT
R
Pr
R
Pb
L
ANT. IN
LINE 2
AUDIO
S-VIDEO
OUT
L
COAXIAL
Y
DIGITAL
AUDIO OUT
A
L
X
R
AUDIO INPUT
COAXIAL
DIGITAL INPUT
Amplifier (Receiver)
18
Downloaded From Disc-Player.com Daewoo Manuals
VIDEO
RF OUT
DF-L72G1N-LS(GB) 04.7.1 3:21 AM 페이지19
Connections
Connecting Optional Equipment
To receive audio/video signals from other equipment,
connect the LINE1 or LINE2 jacks on the DVD
Recorder+VCR to the audio/video out jacks on your
external component, using optional audio/video cables.
CONNECTIONS
OUT
ANT. IN
LINE 2
R
AUDIO
L
VIDEO
RF OUT
19
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지20
Initial Installation
Initial Installation
After successfully connecting your DVD Recorder+VCR to your TV and other
devices, this chapter will show you how to complete the initial installation.
• You must follow the initial installation process to set the time, date,
channels, and language preferences for the DVD Recorder+VCR.
1
A ‘Welcome‘ message is displayed on the screen. Make sure the RF cable
from your antenna or cable TV jack is connected.
Installation
Welcome.
Press [Enter] to begin auto channel search.
Ensure antenna is connected.
Instructions
Setup-Exit
2
Select the desired language for the on-screen menu using […/†]. Press
[ENTER] to confirm.
Installation
Please select your language to begin auto
install procedure:
English
Spanish
French
Instructions
Enter-Confirm Setup-Exit Move …†
3
Select the desired disc menu language using […/†]. Press [ENTER] to
confirm.
Installation
Please select disc menu language:
Default
English
Spanish
French
Italian
Japanese
Chinese
Instructions
Enter-Confirm Setup-Exit Move …†
4
Select the desired disc playback audio language using […/†]. Press
[ENTER] to confirm.
Installation
Please select disc play back audio
language:
Default
English
Spanish
French
Italian
Japanese
Chinese
Instructions
Enter-Confirm Setup-Exit Move …†
20
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지21
Initial Installation
5
Select the desired disc playback subtitle language using […/†]. Press
[ENTER] to confirm.
Installation
Please select disc play back subtitle
language:
Default
English
Spanish
French
Italian
Japanese
Chinese
Off
Instructions
Enter-Confirm Setup-Exit Move …†
6
Select the desired signal type using […/†]. Press [ENTER] to confirm.
Installation
What type of signal are you using?
SETUP
Cable TV
Antenna
Detect Automatically
Instructions
Enter-Confirm Setup-Exit Move …†
7
The DVD Recorder+VCR detects channels automatically and stores them
in memory.
Installation
Searching for available TV stations:
2 channels found
Please wait...
Instructions
Setup-Exit
8
9
10
After finishing Auto Channel Search, set the clock.
Use [œ/√] to move left/right and use […/†] to change the settings.
After setting the clock, press [ENTER] to confirm. If you cancel the process
during Initial Installation, you should repeat this procedure.
Set Clock
Please set the clock:
…
Time : 12 : 00 AM
†
Date : Jan / 01 / 2005 (SAT)
Instructions
Enter-Confirm Setup-Exit Move …†
21
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지22
Initial Setup
Setup Menu Overview
The DVD Recorder+VCR Setup menu includes six categories, including: Installation, Recording Options,
Languages, Preferences, System Info, and Restore Defaults. Press [SETUP] and [œ/√] on the remote control to
view the first and second levels of the Setup menu.
Menu Navigation
1
Press [SETUP].
The Setup menu appears.
2
3
4
5
Use [œ/√] to select the desired category.
While the desired category is selected, press […/†] to move to the second level.
Press [ENTER] to move to the third level.
Use […/†] to select the desired setting, then press [ENTER] to confirm your selection.
Some items require additional steps. Press [SETUP] at any time to return to the previous menu.
6
Press [SETUP] to exit the Setup menu.
INSTALLATION Settings
Tuning Band
1 Press [SETUP].
The Setup menu appears.
2
3
4
5
Use [œ/√] to select ‘Installation‘.
While ‘Installation‘ is selected, press [†] to select
‘TV/CATV‘.
Press [ENTER] to move to the second level.
Use […/†] to select TV or CATV, then press [ENTER].
TV: If you are using a standard antenna to receive channels.
Installation
TV/CATV
CATV
Auto Channel Search
Add/Remove Channels
Modulator Out
CH3
Set Clock
Select The TV
Standard
TV
CATV
Instructions
Enter-Confirm Setup-Exit
Move …†
CATV: If you are using basic cable to receive channels.
• If you are receiving channels from a cable box or satellite receiver connected to the LINE1 or LINE2 inputs, there is
no need to set Tuning Band or search for channels. Set the DVD Recorder+VCR to its LINE1 or LINE 2 input and
select the desired channel on your cable box or satellite receiver.
22
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지23
Initial Setup
Auto Channel Search
The DVD Recorder+VCR has a frequency synthesized tuner capable of receiving
up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and
CATV channels 1-125.
Preparation:
Connect the DVD Recorder+VCR to the desired type of antenna or cable TV
system, as shown in ‘Connecting Antenna/Cable‘ on page 15.
1
2
Follow steps 1-2 as shown under Tuning Band.
3
Press [ENTER] to begin the channel search.
Installation
TV/CATV
CATV
Auto Channel Search
Add/Remove Channels
Modulator Out
CH3
Set Clock
Instructions
Enter-Confirm Setup-Exit
Move …†
While ‘Installation‘ is selected, press […/†] to select ‘Auto Channel
Search‘.
Installation
• After Auto Channel Search is complete, follow the instructions above to make
sure that Tuning Band is set correctly (TV or CATV).
5 channels found
Please wait...
Instructions
Setup-Exit
Add/Remove Channels
This feature allows you to manually add or delete channels from your
channel list.
1
2
3
4
Follow steps 1-2 as shown under Tuning Band.
5
Press [SETUP] to exit the Channel Edit menu.
Use […/†] to select ‘Add/Remove Channels‘.
Press [ENTER]. The Channel Edit menu appears.
Use […/†] to select a channel then toggle the add/delete selection
by pressing [ENTER].
Installation
TV/CATV
CATV
Auto Channel Search
Add/Remove Channels
Modulator Channel
Out
CH3
0 0 1
Set Clock
…
†
Enter-Add/Remove Setup-Exit
Instructions
Change Channel …†
Enter-Confirm Setup-Exit
Move …†
23
Downloaded From Disc-Player.com Daewoo Manuals
SETUP
Searching for available TV stations:
The tuner will automatically search for all available channels in your area
and place them in the tuner’s memory.
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지24
Initial Setup
Modulator Out
This feature allows you to set the RF Output channel to your TV
(you only need to set this if you are using the RF Out connection
to your TV).
1
2
3
4
Follow steps 1-2 as shown under Tuning Band.
5
Press [ENTER] to confirm.
Use […/†] to select ‘Modulator Out‘.
Press [ENTER] to move to the second level.
Use […/†] to set the Modulator Out channel to ‘CH3’ or
‘CH4’.
Installation
TV/CATV
CATV
Auto Channel Search
Add/Remove Channels
Modulator Out
CH3
Set Clock
Select Output
Channel
Instructions
CH3
Set Clock
1 Follow steps 1-2 as shown under Tuning Band.
2 Use […/†] to select ‘Set Clock‘.
3 Press [ENTER]. The Set Clock menu appears.
4 Enter the date and time.
œ /√ (left/right): Moves the cursor to the previous or next column.
…/† (up/down): Changes the setting at the current cursor position.
5
CH4
Enter-Confirm Setup-Exit
Move …†
Installation
TV/CATV
CATV
Auto Channel Search
Add/Remove Channels
Modulator Out
CH3
Set Clock
Instructions
Enter-Confirm Setup-Exit
Move …†
Press [ENTER] to confirm your setting, then press [SETUP] to exit the Setup
menu.
Set Clock
Please set the clock:
…
Time : 12 : 00 AM
†
Date : Jan / 01 / 2005 (SAT)
Instructions
Enter-Confirm Setup-Exit Move …†
24
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지25
Initial Setup
RECORDING OPTIONS Settings
DVD Record Quality
You can set the default DVD recording quality to: HQ (High
Quality - 1 hr/disc), SP (Standard Quality - 2 hrs/disc), EP
(Average Quality - 4 hrs/disc), or SLP (Low Quality - 6 hrs/disc).
1
Press [SETUP].
The Setup menu appears.
2
3
While ‘Recording Options‘ is selected, press [†] to select
‘DVD Record Quality‘.
Press [ENTER] to move to the second level.
DVD Record Quality
VCR Record Quality
Auto Chapter
HQ
SLP
Off
Select Record
Quality
SLP
EP
Instructions
SP
Enter-Confirm Setup-Exit
Move …†
HQ
Use […/†] to to select the desired Record Quality (HQ, SP, EP, or SLP).
SETUP
4
5
6
Use [œ/√] to select ‘Recording Options‘.
Recording Options
Press [ENTER] to confirm your selection, then press [SETUP] to exit the menu.
VCR Record Quality
You can set the default VCR recording quality to SP (Standard
Play) or SLP (Super Long Play). SP is higher quality, but SLP
provides 3 times the recording time; e.g., a 2 hour tape will
record for 6 hours in SLP mode.
Follow the same procedure as the DVD Record Quality.
Recording Options
DVD Record Quality
VCR Record Quality
Auto Chapter
HQ
SLP
Off
Select VCR
Quality
SLP
SP
Instructions
Enter-Confirm Setup-Exit
Move …†
Auto Chapter
During recording, chapter markers are added automatically at
fixed intervals. You can set this interval to 5 minutes, 10 minutes
or 15 minutes. To turn off automatic chapter marking, select ‘Off‘.
Follow the same procedure as the DVD Record Quality.
Recording Options
DVD Record Quality
VCR Record Quality
Auto Chapter
HQ
SLP
Off
Select Auto
Chapter
Off
Instructions
Enter-Confirm Setup-Exit
Move …†
5min
10min
15min
25
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지26
Initial Setup
LANGUAGE Settings
OSD Language
Select a language for the DVD Recorder+VCR Setup menu and
on-screen displays.
1
2
3
Press [SETUP]. The Setup menu appears.
4
5
6
Press [ENTER] to move to the second level.
Use [œ] and [√] to select ‘Language‘.
While ‘Language‘ is selected, press [†] to select ‘OSD
Language‘.
Use […/†] to select the desired language.
Language
OSD Language
Menu Language
Subtitle Language
Audio Language
English
Default
Default
Default
Select OSD
Language
English
Spanish
Instructions
Enter-Confirm Setup-Exit
Move …†
French
Press [ENTER] to confirm your selection, then press [SETUP] to
exit the menu.
Menu/Subtitle/Audio Language
Select your preferred language for Disc Menus, Subtitles, and
Audio soundtracks.
Default : The disc’s default language is selected.
Follow the same procedure as the OSD Language.
Language
OSD Language
Menu Language
Subtitle Language
Audio Language
English
Default
Default
Default
Select Menu
Language
Default
English
Instructions
Enter-Confirm Setup-Exit
Move …†
Spanish
French
Language
OSD Language
Menu Language
Subtitle Language
Audio Language
English
Default
Default
Default
Select Subtitle
Language
Default
English
Instructions
Enter-Confirm Setup-Exit
Move …†
Spanish
French
Language
OSD Language
Menu Language
Subtitle Language
Audio Language
English
Default
Default
Default
Instructions
Enter-Confirm Setup-Exit
Move …†
26
Downloaded From Disc-Player.com Daewoo Manuals
Select Audio
Language
Default
English
Spanish
French
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지27
Initial Setup
PREFERENCE / Video Settings
1
2
3
3
Press [SETUP].
Use [œ/√] to select ‘Preference‘.
Preference
Video
Audio
Parental Controls
Auto Play
Auto Clock
VCR
Instructions
While ‘Preference‘ is selected, press [†] to select ‘Video‘.
Press [ENTER]. The ‘Video‘ submenu is displayed.
Enter-Confirm Setup-Exit
Move …†
TV Aspect Ratio
1 Use […/†] to select ‘TV Aspect‘ while the ‘Video‘ submenu
is displayed.
Press [ENTER] or [√] to go to the second level.
Use […/†] to select the desired TV Aspect.
Video
TV Aspect
Scan Mode
Auto
Interlace
4:3 LB
Press [ENTER] to confirm your selection.
4:3 PS
Press [SETUP] to exit the menu.
4:3 LB : Select when a standard 4:3 TV is connected. Displays
Select Picture
Format
16:9
Instructions
Enter-Confirm Setup-Exit Move …†
Auto
theatrical images with masking bars above and below the picture.
4:3 PS : Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both
sides of the picture are cut off.
16:9 : Select when a 16:9 wide screen TV is connected.
Auto : Convert to the appropriate aspect ratio automatically.
Scan Mode
Progressive Scan Video provides the highest picture quality with Video
reduced flickering.
TV Aspect
Auto
• If you are using the COMPONENT/PROGRESSIVE VIDEO OUT
Scan Mode
Interlace
jacks, but are connecting the DVD Recorder+VCR to a
standard (analog) television, set Scan Mode to Interlace.
• If you are using the COMPONENT/PROGRESSIVE VIDEO OUT
jacks for connection to a TV or monitor that is compatible
Instructions
with a Progressive Scan signal, set Scan Mode to
Enter-Confirm Setup-Exit Move …†
Progressive.
Follow the same procedure as TV Aspect Ratio to change the Scan Mode.
Select Scan
Mode
Interlace
Progressive
Caution
• Once the Progressive Scan setting is entered, an image will only be visible on a Progressive Scan compatible TV
or monitor. Press and hold [P.SCAN] for 3 seconds to return to Interlace Scan mode.
27
Downloaded From Disc-Player.com Daewoo Manuals
SETUP
2
3
4
5
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지28
Initial Setup
PREFERENCE / Audio Settings
Follow the same procedure as Video Settings to select Audio Settings.
Preference
Video
Audio
Parental Controls
Auto Play
Auto Clock
VCR
Instructions
Digital Output
1 Use […/†] to select ‘Digital Output‘ while the Audio
submenu is displayed.
2
3
4
5
Enter-Confirm Setup-Exit
Move …†
Audio
Press [ENTER] to confirm your selection.
Digital Output
Dynamic Range
Virtual Surround
VCR Reception
Tape Play Back
Press [SETUP] to exit the menu.
Instructions
Press [ENTER] or [√] to go to the second level.
Use […/†] to select the desired digital output type.
Off
Off
Off
Stereo
Hi-Fi
Select Digital
Output
Off
Bitstream
LPCM
Enter-Confirm Setup-Exit Move …†
Off
No signal will be output from the Digital Audio Out jacks.
LPCM
Select when connected to a 2 channel digital stereo amplifier. The DVD Recorder+VCR's digital audio signal will
be output in the PCM 2ch format when you play a DVD (or VHS tape) recorded with a Dolby Digital (only for
DVD) or MPEG soundtrack. If the DVD is recorded with a DTS sound track then no sound will be heard.
Bitstream
Select when connected to a Dolby Digital or DTS decoder (or an amplifier or other equipment with a Dolby
Digital or DTS decoder).
Dynamic Range
While watching DVD movies, you may wish to compress the
dynamic range of the audio output (the difference between the
loudest and quietest passages). This allows you to listen to a
movie at a lower volume without losing clarity of sound. Set
‘Dynamic Range‘ to Low or High for this effect.
Follow the same procedure as ‘Digital Output‘ to set the Dynamic
Range.
Audio
Digital Output
Dynamic Range
Virtual Surround
VCR Reception
Tape Play Back
Off
Off
Off
Stereo
Hi-Fi
Enter-Confirm Setup-Exit Move …†
Downloaded From Disc-Player.com Daewoo Manuals
Off
Low
Instructions
28
Select Dynamic
Range
High
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지29
Initial Setup
Virtual Surround
You can enjoy a simulated 3D effect from two speakers by setting Audio
Virtual Surround to On.
Follow the same procedure as ‘Digital Output‘ to set the Virtual
Digital Output
Dynamic Range
Surround option.
Virtual Surround
VCR Reception
Tape Play Back
Off
Off
Off
Stereo
Hi-Fi
Instructions
Select Virtual
Surround
Off
On
Enter-Confirm Setup-Exit Move …†
VCR Reception
Audio
Digital Output
Dynamic Range
Virtual Surround
VCR Reception
Tape Play Back
Off
Off
Off
Stereo
Hi-Fi
SETUP
Select your desired audio source for VCR recording (Stereo,
Mono, or SAP).
Follow the same procedure as ‘Digital Output‘ to set the VCR
Reception option.
Select VCR
Reception
Stereo
Mono
Instructions
Enter-Confirm Setup-Exit Move …†
SAP
Tape Play Back
Select your desired audio signal for VHS tape playback (Hi-Fi,
Audio
Linear, or Mix).
Follow the same procedure as ‘Digital Output‘ to change the Tape Digital Output
Dynamic Range
Play Back option.
Virtual Surround
VCR Reception
Tape Play Back
Off
Off
Off
Stereo
Hi-Fi
Instructions
Enter-Confirm Setup-Exit Move …†
Select Tape
Playback
Hi-Fi
Linear
Mix
29
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지30
Initial Setup
PREFERENCE / Parental Controls
Set Parental Level
The Parental Controls feature allows you to prevent DVDs from being played
based on their ratings or to have certain discs played with alternative scenes.
You can set the parental level from 1 to 8.
1
2
3
Press [SETUP].
Use [œ/√] to select ‘Preference‘.
While ‘Preference‘ is selected, press [†] to select ‘Parental Controls‘.
Preference
Video
Audio
Parental Controls
Auto Play
Auto Clock
VCR
Instructions
Enter-Confirm Setup-Exit
Move …†
4
The Password Input dialog will appear. Enter a 4-digit password using the 09 buttons. If this is the first time you have entered a password, you will be
prompted to enter the password again to confirm it.
• The initial password is ‘0000‘. You must enter this password before you can
change the Parental Level.
Change Password
Current Code
____
Enter New Code
____
Confirm Code
____
Instructions
Setup-Exit
5
After setting the password, press [ENTER] while 'Set Parental Level' is
displayed.
Parental Control
Set Parental Level
Change Password
Off
Instructions
Enter-Confirm Setup-Exit Move …†
6
Enter your new password.
• Set the new password to something other than '0000'.
Password
Enter Password
**__
Instructions
Setup-Exit
7
Use […/†] to select the desired parental level and press [ENTER] to
confirm.
Off : If you select Unlock, the Lock feature is not active. All discs will play in
full.
Level 1 to 8: Some discs contain scenes not suitable for children. If you set a
Parental Control
Set Parental Level
Change Password
Offthe …
Select
parental level
Level6
Level5
Level4
Level3 †
rating for the DVD Recorder+VCR, all scenes with the same rating or lower
will be played. Higher rated scenes will not be played unless an alternative
Instructions
scene is available on the disc. The alternative must have the same rating or
Enter-Confirm Setup-Exit Move …†
a lower one. If no suitable alternative is found, playback will stop. You must
enter the 4-digit password or change the rating level in order to play the disc.
30
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지31
8
Press [ENTER] to confirm your rating selection, then press [SETUP] to exit
the menu.
Parental Control
Set Parental Level
Change Password
Level3
Instructions
Enter-Confirm Setup-Exit Move …†
SETUP
Change Password
1 While ‘Preference‘ is selected, press [†] to select ‘Parental Controls‘.
2 Press [ENTER]. The ‘Parental Controls‘ submenu appears.
3 Use […/†] to select ‘Change Password‘ then press [ENTER].
4 The Change Password submenu appears. Enter your current 4-digit
Parental Control
Set Parental Level
Change Password
Off
password then press [ENTER].
5
Enter a new 4-digit password, then press [ENTER]. Re-enter the new
password to confirm, press [ENTER].
Instructions
Enter-Confirm Setup-Exit Move …†
Change Password
• Master Password : If you forget your password, press 3,3,0,8 on the remote
control and then press [ENTER].
• Set the new password to something other than '0000'.
Current Code
****
Enter New Code
****
Confirm Code
**__
Instructions
Setup-Exit
31
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지32
Various PREFERENCE Settings
AutoPlay
AutoPlay enables the DVD Recorder+VCR to skip the opening ads
and previews at the beginning of a DVD and play the DVD
automatically when it is inserted in the tray.
1
2
3
4
Use […/†] to select ‘AutoPlay‘.
Press [ENTER] or [√] to go to the second level.
Use […/†] to set the AutoPlay Status.
Press [ENTER] to confirm.
Occasionally AutoPlay may play an incorrect title. If this happens,
turn AutoPlay off, reload the disc, and select the desired title in
the DVD's disc menu.
Preference
Video
Audio
Parental Controls
Auto Play
Auto Clock
VCR
Instructions
Enter-Confirm Setup-Exit
Move …†
Select AutoPlay
Status
Off
On
Auto Clock
Auto Clock enables the DVD Recorder+VCR to set the clock
automatically whenever it is in Standby mode (plugged in but
powered off).
Follow the same procedure as ‘AutoPlay’ to set the ‘Auto Clock’
status.
Preference
Video
Audio
Parental Controls
Auto Play
Auto Clock
VCR
Instructions
Enter-Confirm Setup-Exit
Move …†
32
Downloaded From Disc-Player.com Daewoo Manuals
Select Auto
Clock Status
Off
On
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지33
Initial Setup
VCR
This feature enables you to search for Index marks or specific times on your VHS
tapes.
Preference
Video
Audio
Parental Controls
Auto Play
Auto Clock
VCR
Instructions
1
2
3
4
5
While ‘Preference‘ is selected, press [†] to move to the second level.
6
If you select ‘Go-To Search’ and press [ENTER], a submenu appears. Use […/†] to change the time counter
number and press [REW] or [FF].
Use […/†] to select ‘VCR‘.
Press [ENTER] to display the submenu.
Select ‘Index Search’ or ‘Go-To Search’.
Enter-Confirm Setup-Exit
Move …†
If you select ‘Index Search’ and press [ENTER], a submenu appears. Use
[…/†] to select the index number you want to search and press [REW] or [FF].
VCR
VCR
Index Search
Go-To Search
Index Search
Go-To Search
Index Search
Instructions
Enter-Confirm Setup-Exit
Press REW or FF to begin search
or enter a specific Index number
Move …†
––
Setup-Exit
Go-To Search
Instructions
Current Tape Counter is
– :––:––
Press REW or FF to go to
– : – – : 00
Enter-Confirm Setup-Exit Move …†
Setup-Exit
33
Downloaded From Disc-Player.com Daewoo Manuals
SETUP
• The VCR menu is activated only when a video cassette tape is inserted.
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지34
Initial Setup
System Information
System Information helps service personnel identify key firmware information
about your DVD Recorder+VCR in case service is required.
System Info
Chipset
Main Build
Micom Software
DVD Navigation
EP Set 1.0
DR3-1.0.2
0.0.0
1.0.0
Instructions
Enter-Confirm Setup-Exit
Move …†
Restore Defaults
If you wish, you can reset the DVD Recorder+VCR to its original
factory settings.
1
2
3
4
Press [SETUP].
Use [œ/√] to select ‘Restore Defaults‘.
Press [ENTER].
The Initialize menu will appear. Use the […/†] buttons to
select ‘Yes‘ and press [ENTER].
Restore Defaults
If you select this function all
settings will be removed and
Areset
you
sure you want to restore
the product will be
into
default settings?
initial (factory) mode.
Yes
Instructions
No
Enter-Confirm Setup-Exit
Move …†
• Some options cannot be reset, including Parental Controls,
Password, and Country Code.
• After Restoring Defaults the unit reboots automatically and the Installation menu appears. You must set the
country, language, channel, and clock settings again.
34
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지35
On-Screen Display Overview
The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loaded
disc or tape. To access the On-Screen Display (or OSD), press the [DISPLAY] button.
Displaying Disc Information
To display information about the currently loaded disc or tape:
On-screen display operation
1
2
Press [DISPLAY] repeatedly to display/change the information displayed on-screen.
To remove the on-screen display, press [DISPLAY] repeatedly until it disappears.
See the descriptions below for detailed explanations of the on-screen displays for each media type.
• Some discs may not provide all the features shown in the on-screen display examples.
SETUP
Temporary Feedback Icons
Action prohibited or not available
Displaying TV Information
While watching TV, press [DISPLAY] to display/remove the on-screen display.
If no rewritable DVD disc is inserted, you would see a screen like the following:
If a DVD+R or DVD+RW disc is inserted, the disc information is displayed at the first key press. If you press
[DISPLAY] again then the TV information is displayed.
current date and time
channel number
CH-02 10:24PM
audio output signal
AUDIO:Stereo
DVD+R
00:00:00
01:04:02
Changing TV Channels
If no disc is playing, you can change TV channels using the [0-9] or [CH +/-] buttons on the remote control or [CH
…/†] buttons on the front panel.
• Antenna channels are numbered 2 through 69. Cable channels are numbered 1 through 125.
35
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지36
On-Screen Display Overview
Changing the TV Audio Channel
Some TV programs are broadcast with both a main and a Secondary Audio Program (SAP). You can change the
TV audio using the [AUDIO] button.
Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below.
• STEREO+SAP Audio Signal
Stereo ➝ Mono (No display) ➝ SAP ➝ Stereo
• STEREO Audio Signal
Stereo ➝ Mono (No display) ➝ Stereo
• SAP Audio Signal
Mono ➝ SAP ➝ Mono
• MONO Audio Signal
Mono (No display)
The current audio channel is displayed on-screen.
• If SAP is selected, but there is no SAP channel being broadcast, you will still hear the main audio channel.
• If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.
• When an external input is selected, the audio channel can be switched only to Stereo.
OSD Menu Options for DVD
During DVD playback, press [DISPLAY] to show information about the current disc.
While the disc information is displayed, press [DISPLAY] again to show the disc
remaining time.
Title
Shows the current title number and total number of titles, and skips to the desired title number.
1
2
3
4
Press [DISPLAY] during playback. The on-screen display appears on the TV screen.
Use […†] to select the ‘Title‘ icon on the on-screen display. Press [ENTER] to display a submenu.
Use […†] to change the numbers.
Press [ENTER] to confirm.
36
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지37
On-Screen Display Overview
Chapter
Shows the current chapter number and total number of chapters, and skips to the desired chapter number.
1
2
3
4
Press [DISPLAY] during playback. The on-screen display appears on the TV screen.
Use […†] to select the ‘Chapter‘ icon on the on-screen display. Press [ENTER] to display a submenu.
Use […†] to change the numbers.
Press [ENTER] to confirm.
Angle
Shows the current angle number and total number of angles, and changes the angle number.
Press [DISPLAY] during playback. The on-screen display appears on the TV screen.
Use […†] to select the ‘Angle‘ icon on the on-screen display. Press [ENTER] to display a submenu.
SETUP
1
2
3
4
Use […†] to change the numbers.
Press [ENTER] to confirm.
Audio
Shows the current audio soundtrack language, encoding method, and channel number, and changes the setting.
1
2
3
4
Press [DISPLAY] during playback. The on-screen display appears on the TV screen.
Use […†] to select the ‘Audio‘ icon on the on-screen display. Press [ENTER] to display a submenu.
Use […†] to change the numbers.
Press [ENTER] to confirm.
Subtitle
Shows the current subtitle language, and changes the setting.
1
2
3
4
Press [DISPLAY] during playback. The on-screen display appears on the TV screen.
Use […†] to select the ‘Subtitle‘ icon on the on-screen display. Press [ENTER] to display a submenu.
Use […†] to change the numbers.
Press [ENTER] to confirm.
Elapsed
Shows the elapsed playing time, and skips to the desired time.
1
2
Press [DISPLAY] during playback. The on-screen display appears on the TV screen.
3
4
Use […†] to change the numbers and use [œ √] to move left or right.
Use […†] to select the ‘Elapsed’ icon on the on-screen display. Press [ENTER] to search by time. The
submenu appears.
Within 7 seconds, press [ENTER] to confirm the start time. Playback starts from the selected time on the
disc.
• For the title recorded without DVD navigation information, such as the one from broadcast or line input, “Elapsed”
function does not work.
37
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지38
DVD Playback
Playing a DVD
1
Press the [DVD] button to set the remote control to operate the DVD deck.
Turn the TV on and select the video input source connected to the DVD Recorder+VCR.
Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR.
2 Press [EJECT] to open the disc tray.
3 Load your disc in the tray with the playback side down (label side up).
4 Press [EJECT] to close the tray.
5 READING appears on the front panel display, and playback starts automatically. If playback does not start,
press [PLAY (√)]. In some cases, the Disc menu might appear instead.
Playing a DVD+R (+RW)
When a DVD+RW or unfinalized DVD+R is inserted, no title is played automatically but the current TV channel
displays on the screen.
If you want to play a title on the DVD+R (+RW), you must press [MENU] or [PLAY] to display the disc menu.
Select a title to play then press [ENTER].
If a Disc menu is displayed
• A Disc menu may be displayed when you load a DVD. Use the [œ √…†] buttons to select the title/chapter you
want to view, then press [ENTER] to start playback. Press [TITLE] or [MENU] to return to the Disc menu.
• If the Parental Level feature is set and the disc is below the current Parental Level setting, the 4-digit code must
be entered and/or the disc must be authorized; see ‘Set Parental Level‘ on page 30.
• The DVD Recorder+VCR will not play discs with Region codes different from the DVD Recorder+VCR. The Region
code for this DVD Recorder+VCR is 1 (one).
• Unless stated otherwise, all operations described below use the remote control. Some features may also be
available in the Setup menu.
• A disc which is recorded by computer at high speeds (greater than or equal to 2x) may not be recognized.
• A disc which is recorded with unauthorized movie material may not be played.
• A disc which is recorded by other recorder or not recorded correctly may not be recognized or played.
Still Picture and Frame-by-Frame Playback
1 Press [PLAY/PAUSE] during playback. The DVD Recorder+VCR will go into Pause mode.
2 You can back up or advance the picture frame-by-frame by pressing [FF (√√)] repeatedly during Pause
mode.
Fast Forward/Backward
1 Press [REW (œœ)] or [FF (√√)] during playback. The DVD Recorder+VCR will go into Search mode.
2 Press [REW] or [FF] to select the desired speed: √√ X2, √√ X4, √√ X8, √√ X16, √√ X32, √ (forward) or
œ, œœ X2, œœ X4, œœ X8, œœ X16, œœ X32 (backward).
38
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지39
DVD Playback
Slow Motion
Press [SLOW+] to enter Slow Motion mode. The default speed is 1/2. When you press [SLOW+] repeatedly, the
speed will be set to 1/4, 1/8, and normal speed.
• Slow reverse playback is not supported.
Changing the Audio Language
Press [AUDIO] and then press [AUDIO] repeatedly during playback to hear a different audio language or audio
track.
Subtitles
Press [SUBTITLE] and then press [SUBTITLE] repeatedly during playback to select among all available subtitle
languages.
Camera Angle
If a DVD contains scenes recorded at different camera angles, angle icon displays automatically. You can select
among these angles during playback.
Press [ANGLE] and then press it repeatedly during playback to select the desired angle.
The number of the current angle appears on the TV screen.
PLAYBACK
• The Camera Angle icon is displayed on the TV screen when alternate angles are available.
Zoom
The Zoom function allows you to magnify the video image and scroll around the enlarged image.
1
Press [ZOOM] during Play mode to activate the Zoom function.
Each press of the [ZOOM] button changes the Zoom level as follows: X1 (normal size) ➝ X2 ➝ X4 ➝ X1
(normal size)
2
3
Use the [œ √…†] buttons to scroll around the zoomed picture.
To resume normal playback, press [ZOOM] repeatedly until the X1 (normal picture) appears.
• The Zoom function may not work on some DVDs.
• The Zoom function does not work in PAUSE mode.
Repeat
1 To repeat the currently playing chapter, press [REPEAT]. REPEAT CHAPTER appears on the TV screen.
2 To repeat the currently playing title, press [REPEAT] a second time. REPEAT TITLE appears on the TV
screen.
3
4
To repeat the whole disc, press [REPEAT] a third time. REPEAT DISC appears on the TV screen.
You can play in other modes (including Repeat, A-B, Shuffle, or Scan) by pressing [REPEAT] repeatedly.
• You can repeat a scene that starts when ‘Repeat A-‘ displays on the screen. To mark the end point, press [A-B].
Press [A-B] again to repeat the scene.
39
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지40
DVD Playback
A-B
You can repeat a scene between two points (A and B):
1
2
3
4
5
Press [PLAY/PAUSE] play to the start of the desired scene.
Press [A-B] to mark the start point.
Use [FF], [NEXT] to search the end point.
Press [A-B] to mark the end point.
The marked scenes are repeated continuously until you stop the repeat by pressing [A-B] key again.
Search
1 Press [SEARCH] to display the Search menu.
2 Use [œ √] to move to Title (T) or Chapter (C) and use […†] to set the title or chapter
number.
T/
3
œ
…
C
1
√
†
Selecting Titles
When a disc has more than one title, you can select among all available titles as follows:
1
Press [DISPLAY] and use […†] to select the Title icon. Press [ENTER] to display a submenu. Use […†] to
select the desired title number and press [ENTER] to confirm.
Selecting Chapters
When a title on a disc has more than one chapter, you can select among all available chapters as follows:
1
2
Press [PREV (§)] or [NEXT (∞)] briefly during playback to select the next or previous chapter.
To skip directly to any chapter during playback, press [DISPLAY]. Use […†] to select the Chapter icon, then
press [ENTER] to display a submenu. Use […†] to select the desired chapter number and press [ENTER] to
confirm.
Disc Menus
Many DVDs contain Disc menus that allow you to access special features. To open a Disc menu, press [MENU].
Then use the [0-9] buttons to directly select the desired options, or use the […†] buttons to highlight your
desired selection and press [ENTER].
1
2
Press [MENU]. The Disc menu is displayed.
To exit the Disc menu, press [STOP] or [TV VIEW].
Title Menus
1 Press [TITLE]. If the current title has a menu, the Title menu will appear on the TV screen. Otherwise, the
Disc menu may appear.
2
The Title menu may contain camera angles, spoken languages and subtitle options, as well as the chapters
for the title.
40
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지41
VCR Playback
Before You Begin
Press the VCR button to set the remote control to operate the VCR deck.
Turn the TV on and select the video input source connected to the DVD Recorder+VCR.
Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR.
Playing a VHS Tape
1 Insert a prerecorded video cassette.
If the DVD Recorder+VCR is powered off, it will power on automatically.
Make sure the TIMER indicator on the front panel display is not lit. If it is, press [POWER] once.
If a tape without a safety tab is inserted, the DVD Recorder+VCR will start playback automatically.
• If the DVD Recorder+VCR is powered on by inserting a video cassette, playback will not start automatically.
2 Press [PLAY].
3 Press [STOP] to stop playback.
The STOP icon appears on the TV screen. If the tape reaches the end before [STOP] is pressed, the DVD
Recorder+VCR will automatically stop, rewind, and eject the tape.
Tracking Control
Auto Tracking
The automatic tracking function adjusts the picture to remove snow or streaks. It works in the following cases:
• When a tape is played for the first time.
• When the tape speed (SP, SLP) changes.
• When streaks or snow appear because of scratches on the tape.
Manual Tracking
If noise appears on the screen during playback, press the [TRACKING +/-] buttons on the remote control until
the noise on the screen is reduced.
• In case of vertical jitter, adjust these controls very carefully.
• Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for more
than 3 seconds.
41
Downloaded From Disc-Player.com Daewoo Manuals
PLAYBACK
The PLAY icon appears on the TV screen. It is not necessary to select the tape speed (SP, SLP) for playback.
It will be automatically selected by the DVD Recorder+VCR.
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지42
VCR Playback
Special Playback Features
Notes on special playback features
Horizontal lines (noise bars) will appear on the TV screen. This is normal.
The audio is automatically muted during special playback modes, so there is no sound during search, slow motion, etc.
During high-speed picture search, a short time is needed to stabilize tape speed when re-entering Play mode. Slight
interference may be observed during this time.
Fast Forward/Backward
This function lets you visually search forward and backward for a desired scene on your tape.
1
Press [REW] or [FF] during playback.
Search mode will be activated.
If the DVD Recorder+VCR is left in Search mode for more than 3 minutes, the DVD Recorder+VCR will
automatically resume Play mode to protect the tape and video heads.
2
To return to normal playback, press [PLAY].
Still Picture
1 Press [PLAY/PAUSE] during playback.
A still picture appears on the TV screen.
If a still picture vibrates vertically, stabilize it by using the [TRACKING +/-] buttons on the remote control.
If the DVD Recorder+VCR is left in Still mode for more than 5 minutes, the DVD Recorder+VCR will
automatically enter Stop mode to protect the tape and video heads.
2
To return to normal playback, press [PLAY].
Slow Motion
1 Press [SLOW+] for Slow Motion playback.
2 Press [SLOW+] and [SLOW-] repeatedly to adjust the Slow Motion playback speed.
Counter Memory Function
This is useful if there is a section of tape you want to view immediately after recording or if you want to return
to the same point several times.
1
2
Begin recording or playing a tape.
3
4
Press [STOP] when recording or playback finishes.
At the point you want to locate later, reset the real-time counter to 0:00:00 by pressing [CLEAR]. Continue
to play or record.
You can make the tape automatically stop when the counter returns to about ‘0:00:00‘ by setting the
counter to ‘0:00:00‘ in the ‘Go-To Search‘ function under ‘Setup’ ➝ ‘Preference’ ➝ ‘VCR’; see page 31.
42
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지43
Other Disc Playback
Audio CD/MP3 PLAYBACK
The DVD Recorder+VCR can play audio CDs and MP3 files on CD-ROM,
CD-R or CD-RW discs.
1
Insert the CD disc and close the tray. The Audio CD or MP3 CD menu
appears on the TV screen after a few moments to load the disc.
2
Use […†] to select a track or a file, then press [PLAY] or [ENTER].
••• Audio CD •••
During playback, the current track's elapsed playing time will appear
on the front panel display and menu. Playback will stop at the end of
the disc.
• On the MP3 CD menu, you can display the folders on the disc. Use
[…†œ √] to select the folder icon on the MP3 CD menu then press
[ENTER] or [PLAY]. You can also display just the tracks in the folders. Use
[…†œ √] to select a folder then press [ENTER].
3
4
5
••• MP3 •••
While playing an Audio CD, use [FF] or [REW] for 2x speed playback.
Use [PLAY/PAUSE] to pause playback while the disc is playing.
To stop playback at any time, press [STOP].
PLAYBACK
• Press [REPEAT] to repeat a track (file) and press again to repeat the
whole disc.
• If the disc contains JPEG files as well as MP3 files, you can change the
Play mode to display JPEG image files by pressing [TITLE].
JPEG / Kodak Picture CD PLAYBACK
The DVD Recorder+VCR can display JPEG files on CD-R/RW and Kodak
Picture CDs.
1
Insert your CD and close the tray. The JPEG CD or Kodak Picture CD
folder tree appears.
2
If there are folders which contain JPEG files (e.g., pictures on a Kodak
Picture CD), select the desired folder using […†œ √] and press
[ENTER].
43
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지44
Other Disc Playback
3
Select the thumbnail you want to display using […†œ √] and press
[ENTER].
4
The full size image will be displayed and a slide show starts
automatically with a time interval of 10 seconds.
5
Press [NEXT] or [PREV] to manually skip to the next or previous image.
6
7
Press [√] (or [œ]) to rotate the image (counter) clockwise.
Press [STOP] to exit the slideshow.
• If the disc contains MP3 files as well as JPEG files, you can change the
Play mode to play MP3 files by pressing [TITLE].
• When a CD contains both MP3 files and JPEG files, the default Play
mode is JPEG image files.
• The DVD Recorder+VCR can playback up to 1000 files per disc.
• MP3 files encoded below 64kbps are not supported.
Playing MP3 Files During a Slide Show
You can enjoy a slide show while listening to MP3 music files.
1
2
3
4
5
Prepare a CD which includes both MP3 and JPEG files.
Insert the CD and play an MP3 file.
Press [TITLE] while playing the MP3 file to change the Play mode. The music playback will not stop.
Select an image file and press [ENTER] to start the slide show.
The MP3 file you selected continues to play during the JPEG slide show.
44
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지45
Basic Recording
Recording from TV
Follow the instructions below to record a TV program.
1 Turn on the DVD Recorder+VCR and load a recordable disc or tape.
Make sure your TV input is set to view the DVD Recorder+VCR.
2 Set the desired Recording mode by pressing [REC MODE] repeatedly.
DVD: HQ (High Quality - 1 hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Average Quality - 4 hrs/disc), or
SLP (Low Quality - 6 hrs/disc).
VCR: SP (Standard Play), SLP (Super Long Play - 3 times SP)
3 If your DVD Recorder+VCR does not show a TV program, press [TV VIEW] on the remote control. Use [CH … /
†] to select the TV channel you wish to record.
4 Press [AUDIO] to select the audio channel to record (Stereo, SAP, or Mono).
The table below shows what audio channel will be recorded with different settings and different types of
broadcasts.
The last column (Monitor Audio) shows what you will hear during recording. For example, if the TV
broadcast is in Stereo, then setting the DVD Recorder+VCR to Stereo will record the broadcast in Stereo,
and the Monitor Audio will also be in Stereo.
• If you set the audio channel to SAP, but no SAP channel is broadcast, the main audio (Mono or Stereo) will
be recorded.
MONO
MONO
STEREO
Left
Right
MONO
MONO
SAP
STEREO
SAP
MONO
STEREO
MONO+ SAP
STEREO+SAP
Broadcast Audio
L Ch
R Ch
MONO
MONO
L
R
L
L
L
R
MONO
MONO
MONO
MONO
SAP
SAP
L
R
SAP
SAP
MONO
MONO
Monitor
Audio
MONO
STEREO
Left
Right
MONO
MONO
SAP
STEREO
SAP
MONO
RECORDING
Selected Audio
PLAYBACK
TV Broadcast
5 Press [REC (●)] once.
Recording will start. The REC indicator lights on the front panel display.
Recording continues until you press [STOP] or the disc is full.
To record for a fixed length of time, see One Touch Record on the next page.
6 Press [STOP (■)] to stop recording.
• The maximum number of DVD titles per disc is 49. If the DVD Recorder+VCR is powered off during DVD recording,
the recording will not be saved.
• If a DVD+RW or unfinalized DVD+R disc is inserted in the tray, no title is played automatically after loading is
finished.
• If you are recording to a blank DVD+R (+RW) disc, it may take up to 7 minutes for post processing after recording.
45
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지46
Basic Recording
One Touch Record (OTR)
One Touch Recording allows you add recording time in fixed increments at the touch of a button.
1 Follow steps 1-4 under Recording from TV.
2 Press [REC (●)] repeatedly to set the length of the recording.
Recording starts after the first press. Each subsequent press increases the recording time by 15 minutes
(DVD, to a maximum of 360 minutes) within the available space or 30 minutes (VCR, to a maximum of 240
minutes). The recording time is displayed on the front panel display.
Checking the Recording Time
Total time and recorded time are displayed on the TV screen after pressing [DISPLAY] twice. Recorded time is
displayed on the front panel display.
To Pause the Recording
1
2
Press [PLAY/PAUSE] to pause the disc or tape during recording.
When you want to continue recording, press [PLAY/PAUSE] or [REC (●)].
Note
• To quit One Touch Recording, press and hold [STOP] for 3 seconds.
• The DVD Recorder+VCR will automatically power off when One Touch Recording ends.
Tip (VCR mode only)
• Always use [PLAY/PAUSE] for best results when making changes during recording.
For example: To change channels during recording, first press [PLAY/PAUSE] to put the unit in Pause mode. Then
select the desired channel on the DVD Recorder+VCR, and press [PLAY/PAUSE] again to resume recording.
• You cannot record on the VCR deck and DVD deck at the same time.
• While the VCR is recording, DVD playback is possible. However, while the DVD is recording, all VCR functions are
disabled.
46
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지47
Basic Recording
One Touch Copy - DVD to VHS
You can copy the contents of a DVD to a VHS tape using the [DVD ➝ VCR] button.
• If the DVD you are attempting to copy is copy-protected, you will not be able to copy the disc. It is not permitted to
copy Macrovision encoded DVDs.
• Copy to VCR does not work in Progressive Scan Mode.
1 Insert a Disc.
Insert the disc you wish to copy in the DVD deck and close the disc tray.
2 Insert a VHS Tape.
Insert a blank VHS videotape into the VCR deck.
3 Select DVD mode by pressing [DVD] on the remote control or
pressing [DVD/VCR] on the front panel.
Copy to Tape
Choose speed then
press COPY:
SLP
SP
4 Find the place on the DVD (or Disc) from which you want to start
recording using the [PLAY/PAUSE], [REW] and [FF] functions.
For best results, pause playback at the point from which you
want to record.
DVD Status
5 Press [DVD ➝ VCR] on the front panel.
■ Stop – : – – : – –
The Copy to VCR menu appears.
6 Press [REC SPEED] to select the desired Record Mode:
• SP (Standard Play)
• SLP (Super Long Play, 3 times SP).
7 Press [DVD ➝ VCR] again to start copying.
8 Stop the Copy Process
00:00:32
02:03:27
COPY EDIT (DVD ➝VCR)
During one touch copy you can search or change REC SPEED and resume copy.
1
2
3
4
During One Touch Copy press [PLAY/PAUSE] to enter COPY EDIT mode.
Search with [FF/REW] or [NEXT/PREV] key.
Press [DVD ➝ VCR] and you can change REC SPEED.
Press [DVD ➝ VCR] again to resume copy
47
Downloaded From Disc-Player.com Daewoo Manuals
RECORDING
To stop copying at any time, press [STOP]. You must stop the Copy process manually when the DVD movie
ends, or the unit may replay and record over and over again.
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지48
Basic Recording
One Touch Copy - VHS to DVD
You can copy the contents of a VHS tape to a DVD+R or DVD+RW using the [VCR ➝ DVD] button. This allows
you to archive your old VHS tapes to DVD.
If the VHS videotape you are attempting to copy is copy-protected, you will not be able to copy the tape. It is not
permitted to copy Macrovision encoded tapes.
1 Insert a VHS Tape.
Insert the VHS videotape you wish to copy into the VCR deck.
2 Insert a DVD+R or DVD+RW disc.
Insert a blank DVD+R or DVD+RW disc in the DVD deck and close the disc tray.
• When using a DVD+RW disc, you must initialize before copying;
see page 52.
3 Select VCR mode by pressing [VCR] on the remote control or
Copy to Disc
pressing [DVD/VCR] on the front panel.
Choose quality then
press COPY:
HQ
SP
EP
SLP
DVD Status
4 Find the place on the VHS tape from which you want to start
recording using the [PLAY/PAUSE], [FF] and [REW] functions.
For best results, pause playback at the point from which you
want to record.
■ Stop
5 Press [VCR ➝ DVD] on the front panel.
0 : 00 : 10
The Copy to DVD menu appears.
6 Press [REC SPEED] to select the desired Record Mode:
•
•
•
•
HQ (High Quality - 1 hr/disc)
SP (Standard Quality - 2 hrs/disc)
EP (Average Quality - 4 hrs/disc)
SLP (Low Quality - 6 hrs/disc)
7 Press [VCR ➝ DVD] again to start copying.
8 Stop the Copy Process
To stop copying at any time, press [STOP].
Copying will stop automatically when the VHS tape ends.
DVD COPY
00:00:32
Copy to Disc
Stopping the copy & updating
the disc. This may take a few
minutes. Please wait...
Instructions
Setup-Exit
00:00:32
COPY EDIT (VCR ➝ DVD)
During one touch copy you can search and resume copy.
1
2
3
4
Press [PLAY/PAUSE] to enter COPY EDIT mode.
Press [PLAY/PAUSE] again to playback
Search with [FF/REW] key.
Press [VCR ➝ DVD] to resume copy.
48
Downloaded From Disc-Player.com Daewoo Manuals
02:03:27
TAPE COPY
02:03:27
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지49
Timer Recording
The Timer Recording function allows you to record up to 8 programs within a period of one month.
1 Insert recordable media such as DVD+R ,DVD+RW, recordable VHS tape.
2 Press [TIMER].
•
•
•
•
•
•
The ‘Timer Recording’ menu appears.
Use […†] to move to a timer recording slot, and press [ENTER] to modify it.
If you did not set the clock on the DVD Recorder+VCR, you must do so before
programming a timer recording.
Media - Choose desired media (DVD or VHS) using […†].
Ch. – Choose the desired channel, or one of the external inputs from which
to record.
Date – Choose a date up to 1 month in advance, or select a daily or weekly
program.
Start Time – Set the recording start time.
End Time – Set the recording end time.
Mode – Choose a Record mode.
DVD: HQ, SP, SLP or EP
VCR: SP, SLP
3 Enter the necessary information for your Timer Recording(s).
•
•
•
•
•
œ √ – Moves the cursor left/right.
…† – Changes the setting at the current cursor position.
Press [SETUP] to exit the Timer Record menu.
Press [ENTER] after filling in all the program information.
Press [TIMER] to display the Timer Record List.
4 Press [ENTER] to save the program.
The Timer Record List will appear.
the Timer Recording.
CH No. Date
---- --/----- --/----- --/----- --/----- --/----- --/----- --/----- --/-Instructions
Start
--:---:---:---:---:---:---:---:--
End Mode
--:-- ----:-- ----:-- ----:-- ----:-- ----:-- ----:-- ----:-- ---
Enter-Edit Setup-Exit Move …†
Edit Timer
Media
CH No.
Date
Start
End
Mode
Repeat
Delete
Instructions
CH-03
Jan/02 Sun
01:36 AM
02:36 AM
HQ
Once
Enter-Save Setup-Exit
Timer Recording
CH No. Date Start End Mode
CH03 01/0201:36AM 02:36AM HQ
---- --/-- --:-- --:-- ------ --/-- --:-- --:-- ------ --/-- --:-- --:-- ------ --/-- --:-- --:-- ------ --/-- --:-- --:-- ------ --/-- --:-- --:-- ------ --/-- --:-- --:-- --Instructions
Enter-Edit Setup-Exit Move …†
Note
• The Timer indicator lights on the front panel display when the DVD Recorder+VCR is ready for the Timer
Recording.
• The tape timer indicator is blinking if any of the following meets if no recordable tape is inserted.
Both the disc and tape timer indicators are blinking if tape and disc timer recordings are overlapped.
• The DVD Recorder+VCR will record the audio according to the current TV tuner setting (Stereo, Mono or SAP). Use
the [AUDIO] button to set the audio before switching the DVD Recorder+VCR to Standby mode.
• The DVD Recorder+VCR will automatically power off when the Timer Recording ends.
• There is a short delay when a timer recording finishes to confirm the recorded program. If two timer recordings
are set to record sequentially (one right after the other), the very beginning of the later program may not be
recorded.
49
Downloaded From Disc-Player.com Daewoo Manuals
RECORDING
5 Press [SETUP] to exit the Timer Record List.
6 Timer indicator will light or blinking. Power Off the DVD Recorder+VCR to start
Timer Recording
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지50
Timer Recording
Canceling a Timer Recording
You can clear a Timer Recording any time before the recording actually starts.
• Use […†] to select the program you want to erase on the Timer Recorder List, then press [ENTER] to
modify it. Use […†] to select 'Delete' then press [ENTER].
Stopping a Timer Recording in Progress
After a Timer Recording has started, you can still cancel the program by pressing and holding [STOP] for 3
seconds.
Timer Recording Troubleshooting
Even if a Timer Recording is set, the DVD Recorder+VCR will not record if:
•
•
•
•
No disc is loaded.
A non-recordable disc is loaded.
DISC Lock is set to ON in the DISC Settings menu; see page 53.
There are already 49 titles recorded on the disc.
You cannot enter a Timer Recording if:
• A recording is already under way.
• The start time has already passed.
• Eight Timer Recordings have already been set.
If two or more Timer Recordings overlap:
• The earlier program takes priority.
• When the earlier program finishes, the later program starts.
• If two programs are set to start at exactly the same time, the program entered first takes priority.
Confirmation is not possible when:
• The DISC Protect setting is set to ON.
• There are already 49 titles recorded on the disc.
If the disc is damaged, the recording may not complete successfully, even if the Check field shows ‘Rec. OK‘.
Recording Priority
• Timer Recording and OTR (One Touch Record) have the same priority but they have lower priority than manual
recording. During manual recording Timer Recording or OTR will be ignored.
50
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지51
Recording from an External Input
Recording from External Components
You can record from an external component, such as a camcorder or VCR, connected to any of the DVD
Recorder+VCR’s external inputs.
1 Make sure the component you want to record from is connected properly to the DVD Recorder+VCR; see pages
15 and 18.
2 Use [ … †] to select the external input to record from.
• Tuner: Built-in tuner
• LINE1 : Audio/Video on front panel
• LINE2 : Audio/Video Input on back panel
3 Load a recordable disc or tape.
4 Set the desired Recording mode by pressing [REC MODE] repeatedly.
DVD: HQ (High Quality - 1 hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Average Quality - 4 hrs/disc), or
SLP (Low Quality - 6 hrs/disc).
VCR: SP (Standard Play), SLP (Super Long Play - 3 times SP)
5 Press [REC (●)] once.
Recording will start. The REC indicator lights on the front panel display.
Recording continues until you press [STOP] or the disc is full.
To record for a fixed length of time, see ‘One Touch Record‘ on page 46.
6 Press [STOP (■)] to stop recording.
Note
• If your source is copy-protected, you will not be able to record it using the DVD Recorder+VCR. See ‘Copyright
Notice‘ on page 7 for more details.
RECORDING
51
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지52
Editing
DISC Initialize
• If you load a blank DVD+R(+RW) disc, it will be initialized (formatted to enable recording).
• Do not start recording until disc initialization is complete.
• If you load a DVD+RW that has already been used you can record a program immediately.
Disc Menu
For recordable DVD media, such as DVD+R and DVD+RW discs, you can manage the disc using the Disc Menu.
The DVD+R Disc Menu allows you to rename your disc or finalize it so it will be compatible with most other
DVD players.
The DVD+RW Disc Menu allows you to erase, lock, or unlock your disc. You can also make it compatible with
most other DVD players.
Information / Erase the disc (DVD+RW)
1 Press [MENU] to go to Disc Menu mode.
2 In Disc Menu mode, press […] to move to the top menu.
3 Press [√] to display the Disc Menu.
4 The Disc Menu shows you disc information, such as disc type, number of
recordings, total titles, free space, etc.
Information
Type
Recordings
Total Title
Free Space
Finalized
Locked
Compatible
DVD+RW
5
00:57:57
01:48:48
No
Yes
Instructions
Setup-Exit
5
6
Use [œ/√] to select the Disc Erase menu.
If you want to erase the whole disc, press [ENTER].
Erase the disc
Press [Enter] if you want
to erase the disc. All
existing recordings will
be cleared.
Instructions
Enter-Confirm
7
To confirm, select ‘Yes‘. To cancel, select ‘No‘. If you select ‘Yes‘ and press
[ENTER], all the contents of the disc will be lost.
• DVD+R discs cannot be locked (unlocked) or erased.
Erase the disc
Erase the disc?
All recordings will be lost.
Yes
No
Instructions
Enter-Confirm Move …†
52
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지53
Editing
Lock/Unlock Disc (DVD+RW)
If you want to protect a disc from accidental recording, editing, or erasing, you can lock the disc. Later, if you
change your mind, you can unlock the disc.
1
2
3
4
5
Use […] to go to the top menu.
Press [√] to display the Disc Information Menu.
Use [œ/√] to select ‘Lock/Unlock Disc’.
Press [ENTER] as shown on the screen.
You can see the current disc status (Locked or Unlocked).
Lock/Unlock Disc
Press [Enter] to lock the
disc. This prevents future
disc operations or
recordings.
Instructions
Enter-Confirm
6
You can change the disc status by selecting ‘Yes‘ and pressing [ENTER].
Lock/Unlock Disc
Disc is unlocked.
Do you want to lock it?
Yes
No
Instructions
Enter-Confirm Move …†
7
8
The Changing Disc Status bar will appear. This process takes a few seconds.
After the process is finished the menu disappears automatically.
Lock/Unlock Disc
Changing disc lock status.
Please wait a moment....
EDITING
53
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지54
Editing
Finalize (Make Compatible)
Finalizing a DVD+R ‘locks’ its recordings in place so the disc can be played on most standard DVD players or
computers equipped with DVD-ROM drives.
'Make Compatible' for a DVD+RW will automatically create a menu screen for navigating the disc. This menu
screen is accessible by pressing [MENU] or [TITLE].
• Once you have finalized a DVD+R disc, you cannot edit or record anything else on that disc.
1
2
3
Use […] to go to the top menu.
Press [√] and select ‘Finalize‘ for a DVD+R, or ‘Make
Compatible‘ for DVD+RW.
4
Press [ENTER] as shown on the screen.
5
Select 'Yes' using […] and press [ENTER] to finalize the disc
(or make the disc compatible if it is a DVD+RW).
6
7
••• DVD+R disc •••
••• DVD+RW disc •••
Finalize
Make Compatible
Press [Enter] to make any
previous title editing
compatible with your DVD
player.
Press [Enter] to make any
previous title editing
compatible with your DVD
player.
Instructions
Enter-Confirm
Instructions
Enter-Confirm
Finalize
Make Compatible
Make disc compatible with
your DVD player.
Yes
No
Make disc compatible with
your DVD player.
Yes
No
Instructions
Enter-Confirm Move …†
Instructions
Enter-Confirm Move …†
Finalize
Make Compatible
Finished.
This Disc should already
be compatible.
ok
Finished.
This Disc should already
be compatible.
ok
Instructions
Enter-Confirm Move …†
Instructions
Enter-Confirm Move …†
Press [√] to display the Disc Information Menu.
Press [ENTER] again.
Press [SETUP] to go to the top disc menu.
• ‘Finalize (Make Compatible)’ can take up to 3-4 minutes
depending on the type of disc, how much is recorded on the
disc, and the number of titles on the disc.
• If you do not make your DVD+RW disc compatible, your edits
will not be recognized by other DVD players.
54
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지55
Editing
Change Disc Name
You can rename your disc to any name you choose. The default disc name is ‘MY
DVD‘.
1
2
3
4
5
6
Use […] to go tothe top menu.
Press [√] to display the Disc Information Menu.
Press [Enter] to change
the disc name.
Press [√] and select ‘Change Disc Name‘.
Press [ENTER] as shown on the screen.
The Keyboard Menu appears.
Use [œ √…†] to select and press [ENTER] to enter the name of the disc.
CLR : Clear the disc name
SP : Space
DEL : Delete a character
SAVE : Save the disc name
7
8
Change Disc Name
Instructions
Enter-Confirm
Change Disc Name
MY DVD
CLR SP
1 2 3 4 5
ABC D E
K LMN O
U VW X Y
: ; &
DEL
6 7
F G
P Q
Z (
SAVE
8 9 0
H I J
R S T
) . ,
Enter-Confirm Move …†
Press [ENTER] again.
To save the name of the disc, select ‘SAVE‘ and press [ENTER].
Change Disc Name
Problem.
This disc is locked. It
cannot be renamed.
ok
Instructions
Enter-Confirm Move …†
EDITING
55
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지56
Editing
Title Menu
You can manage the titles on your DVD+R/RW discs using the Title menu.
Play a Title
To play a title:
1
2
3
4
5
Press [MENU] to display the disc menu.
Select the desired title you want to manage using […†].
Play Title
…
Press [√] to display the title menu.
Select ‘Play Title' using [œ √] .
Press [Enter] to begin
playback of title.
√
†
Press [ENTER] to play the title.
Instructions
Enter-Confirm
Erase a Title
1 Follow steps 1 to 3 under ‘Play Title‘.
2 Select ‘Erase Title‘ using [œ √].
3 Press [ENTER] to erase the title.
Erase Title
…
Press [Enter] to erase
this title.
√
†
Instructions
Enter-Confirm
4
Select 'Yes' and press [ENTER] to confirm.
Erase Title
…
√
Would you like to Erase
the title?
Yes
No
†
Instructions
Enter-Confirm Move …†
5
The Erase Title progress bar will be displayed. This may takes several
seconds.
6
After erasing is complete, the erased title remains as an empty title.
Erase Title
…
Title is being erased.
√
• You can erase titles on DVD+RW discs only.
†
56
Downloaded From Disc-Player.com Daewoo Manuals
Please wait a moment...
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지57
Editing
Change Name
To change the name of a title:
1
2
3
Follow steps 1 to 3 under ‘Play Title‘.
Select ‘Change Name’ using [œ √] .
Change Name
…
Press [ENTER] to change the title name.
Press [Enter] to change
the title name.
√
†
4
Instructions
Enter-Confirm
The Keyboard Menu will be displayed. Use [œ √…†] to select a
character or function and press [ENTER].
CLR : Clear the whole title.
SP : Add a space
DEL : Delete a character
SAVE : Save the title name
5
Change Name
…
√
†
After the new title name is complete, select ‘SAVE’ and press [ENTER].
TITLE
CLR SP
1 2 3 4 5
ABC D E
K LMN O
U VW X Y
: ; &
DEL
6 7
F G
P Q
Z (
SAVE
8 9 0
H I J
R S T
) . ,
Enter-Confirm Move …†
Record Option
To set DVD+R and DVD+RW recording options:
1
2
3
Follow steps 1 to 3 under ‘Play Title‘.
Select ‘Record Options’ using [œ √] and press [ENTER].
Record Options
…
Select your preferred record options for each disc type (DVD+R and
DVD+RW):
√
Press [Enter] to select
a method for overwriting
this title.
†
For DVD+R
Instructions
Enter-Confirm
The last recorded title : Allows you to append your new recording to the
end of your last recording, or record it as a new
title.
Others :
Allows you to record your new title until the end
of the disc.
The last blank title :
Record Options
…
Choose one of the following:
Overwrite then stop
Overwrite and continue
√
Allows you to record your new title until the end
of the disc.
†
The last recorded title : Allows you to record over your last recorded
Instructions
title and then stop.
Enter-Confirm Move …†
Allows you to record over your last recorded
title and continue recording until the end of the disc.
Allows you to append your new recording to the end of your last recording.
Others :
Allows you to record over the title and then stop.
Allows you to record over the title and continue recording until the end of the disc.
57
Downloaded From Disc-Player.com Daewoo Manuals
EDITING
For DVD+RW
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지58
Editing
Editing
When you insert a DVD+R or DVD+RW disc already recorded by your DVD Recorder+VCR, you can edit the titles
and chapters in a variety of ways.
To edit a recorded title, select the title on the disc menu and press [EDIT].
The selected title will begin playing automatically.
• After editing is complete, a DVD+RW disc will not be compatible with other DVD players until you make the disc
compatible; see page 54.
Titles and Chapters
When you insert a DVD+R or DVD+RW disc already recorded by your DVD Recorder+VCR, all titles recorded on
the disc appear on your screen. If a selected title has chapters, you can skip to the next or previous chapter by
pressing [NEXT] or [PREV].
You can also see how many chapters are in a title by pressing [DISPLAY] during playback.
Title
To select a specific title:
DVD Edit
1
2
3
Title
1 of 2 Select Title
…
Chapter
1 of 11
Edit Chapters
1 of 2 †
Hide Chapter
Change Index Picture
Split Title
Use […†] to select ‘Title‘.
Press [ENTER] to display the submenu.
Use […†] to select the desired title number and then press [ENTER].
Instructions
Enter-Confirm Setup-Exit
Move …†
Chapter
To select a specific chapter:
DVD Edit
1
2
3
Title
1 of 2 Select Chapter
…
Chapter
1 of 11
Edit Chapters
1 of 11 †
Hide Chapter
Change Index Picture
Split Title
Use […†] to select ‘Chapter‘.
Press [ENTER] to display the submenu.
Use […†] to select the desired chapter number and then press [ENTER].
Instructions
Enter-Confirm Setup-Exit
Move …†
Edit Chapters
You can add a chapter marker anywhere in a title during playback.
Once the chapter is marked, you can use the chapter search feature as
described above.
You can add/delete chapter markers or delete all chapter markers in a title.
1
2
3
Use […†] to select ‘Edit Chapters‘.
4
Press [ENTER] to confirm.
Press [ENTER] to display the submenu.
Use […†] to select one of the various chapter marker functions (Add,
Delete, or Delete All).
58
Downloaded From Disc-Player.com Daewoo Manuals
DVD Edit
Title
1 of 2 Choose the edit
Chapter
1 of 11
Function
Edit Chapters
Add
Hide Chapter
Change Index Picture Delete
Split Title
Delete All
Instructions
Enter-Confirm Setup-Exit
Move …†
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지59
Editing
Hide Chapters
This feature allows you to hide or unhide a chapter. After hiding a chapter, the
chapter is not deleted but only hidden. If a chapter is hidden then it shows
‘Unhide Chapter‘ and vice versa.
DVD Edit
Title
1 of 2
Chapter
1 of 11
Edit Chapters
Hide Chapter
Change Index Picture
Split Title
Instructions
Enter-Confirm Setup-Exit
Move …†
Change Index Picture
Each title displayed in the Playlist menu is represented by a thumbnail picture
taken from the start of that title or chapter. If you prefer, you can select a
different still picture from within the title.
1
2
3
4
Use […†] to select ‘Change Index Picture‘.
Press [ENTER] to display the submenu.
Use […†] to select ‘Yes‘ if you prefer to change the picture.
DVD Edit
Title
1 of 2
Chapter
1 of 11
Edit Chapters
Change Picture
Hide Chapter
Change Index Picture Are you sure?
Split Title
Yes
No
Instructions
Enter-Confirm Setup-Exit
Move …†
Press [ENTER] when the preferred picture is on your TV screen.
Split Title
This feature allows you to split a title into two titles.
DVD Edit
1
2
3
4
Title
1 of 2
Chapter
1 of 11
Edit Chapters
Split the title
Hide Chapter
Change Index Picture in two?
Split Title
Yes
Use […†] to select 'Split Title'.
Press [ENTER] to display the submenu.
Use […†] to select 'Yes' if you prefer to split the title.
Press [ENTER] to confirm. It may take a few minutes to split the title.
No
Instructions
Enter-Confirm Setup-Exit
Move …†
Split Title
Splitting title into 2 titles.
Please wait a moment....
Instructions
Setup-Exit
EDITING
59
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지60
Troubleshooting
Check the following guide for the possible cause of a problem before contacting customer support.
Symptom
Cause
Solution
No power.
The power cord is disconnected.
No picture.
The TV is not set to receive DVD
Recorder+VCR signal output.
Plug the power cord into the wall outlet
securely.
Select the appropriate video input on the
TV so the picture from the DVD
Recorder+VCR appears on the TV screen.
Connect the video cable securely.
No sound.
Playback picture is poor.
DVD Recorder+VCR does
not start playback.
The video cable is not connected
securely.
The TV power is turned off.
The equipment connected with the
audio cable is not set to receive
DVD Recorder+VCR signal output.
The audio cables are not connected
securely.
The power on the equipment
connected with the audio cable is
turned off.
The audio cables are damaged.
The disc is dirty.
Tape heads are dirty.
Tape is a rental or was recorded on
another VCR.
No disc is inserted.
No tape is inserted.
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the
guide.
The disc is dirty.
The Parental Control level is set.
Picture from external input
is distorted.
The video signal from the external
component is copy-protected.
Some channels are skipped
over when using [CH…†].
The skipped channels were deleted
with the CH. Add/Del feature.
Picture or sound of
broadcasting channel is
weak or missing.
Camcorder image not shown.
Antenna or cables are loose.
Wrong Tuning Band is selected in
the DVD Recorder+VCR Setup menu.
Camcorder is off.
60
Downloaded From Disc-Player.com Daewoo Manuals
Turn on the TV.
Select the correct input mode on the
audio receiver so you can listen to the
sound from the DVD Recorder+VCR.
Connect the audio cables securely.
Turn on the equipment connected with
the audio cable.
Replace with new ones.
Clean the disc.
Clean the video heads.
Use [Tracking +/–] for manual tracking
adjustment while a tape is playing.
Insert a disc or tape. (Check that the disc
indicator on the front panel display is lit.)
Insert a playable disc. (Check the disc
type, color system, and regional code.)
Place the disc with the playback side
down.
Place the disc on the disc tray correctly
inside the guide.
Clean the disc.
Cancel the Parental Control function or
change the rating level.
You cannot connect via the DVD
Recorder+VCR. Connect the component
directly to your TV.
Use the CH. Add/Del feature to restore
channels. See ‘Add/Remove Channels‘ on
page 23.
Tighten connections or replace cable.
Try all ‘Tuning Band‘ options; see page
22 for details.
Turn camcorder on and operate properly.
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지61
Troubleshooting
Symptom
Cause
Solution
Camcorder image via A/V
input to DVD Recorder+VCR
is not shown on TV screen.
Can’t play disc recorded
on this DVD Recorder+VCR
on another DVD player.
DVD Recorder+VCR’s source is not
set to LINE1/LINE2 composite.
Use INPUT to select AV input channel
(LINE1/LINE2 composite).
Finalize the disc; see page 54.
No solution.
No solution.
Use another disc.
You cannot record the source.
Select the channel on the DVD
Recorder+VCR’s built-in TV tuner.
Set clock to correct time. See ‘Set Clock‘
on page 24.
Reprogram Timer. See ‘Timer Recording‘
on page 49.
Reprogram Timer.
No solution.
No solution.
Make A/V connections. Stereo is
available only via A/V output from DVD
Recorder+VCR.
Select AUX or A/V source as TV input.
Set TV audio channel mode to Stereo.
See ‘Changing the TV Audio Channel‘ on
page 36.
Point the remote control at the remote
sensor of the DVD Recorder+VCR.
Operate the remote control within 23 ft
(7m).
Remove the obstacle.
Replace the batteries.
Press and hold POWER key on font over 5
seconds.
61
Downloaded From Disc-Player.com Daewoo Manuals
REFERENCE
The disc was not finalized (or not
made compatible if using a DVD+RW).
Some players will not play even a
finalized disc.
Discs recorded with copy-once
material cannot be played on other
players.
The remaining blank space on the
Cannot record or did not
disc is insufficient.
record successfully.
The source you are trying to record
is copy-protected.
When setting the recording channel,
the channel is tuned on your TV’s tuner.
Timer Recording not
Clock in DVD Recorder+VCR is not
possible.
set to correct time.
Timer has been programmed
incorrectly.
TIMER indicator light does not
appear after programming timer.
Stereo Audio Record and/or TV is not Stereo-compatible.
Broadcast program is not in stereo
Playback not present.
format.
DVD Recorder+VCR A/V Out jacks
are not connected to TV A/V In
jacks.
DVD Recorder+VCR Audio/Video Out
is not selected for viewing at the TV.
DVD Recorder+VCR’s TV audio
channel is set to SAP or MONO.
The remote control is not pointed at
Remote control does not
the remote sensor of the DVD
work properly.
Recorder+VCR.
The remote control is too far from
the DVD Recorder+VCR.
There is an obstacle in the path of
the remote control and the DVD
Recorder+VCR.
The batteries in the remote control are dead.
The remote control is locked.
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지62
Troubleshooting
Moisture Condensation
Moisture condensation can occur:
In locations where moisture condensation may occur:
When the DVD Recorder+VCR is moved from a cold
place to a warm place.
Keep the DVD Recorder+VCR plugged into an AC
power outlet with the power on. This will help
prevent condensation.
Under extremely humid conditions.
When condensation has occurred, wait a few hours
for the DVD Recorder+VCR to dry before using it.
62
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지63
Technical Specifications
General
Power requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Signal system
AC 120V, 60 Hz
34W
16.9 x 3.54 x 14.0 inches (430 x 91 x 354 mm) (w x h x d)
13.5 lbs (6.18 kg)
41°F to 95°F (5°C to 35°C)
5% to 90%
NTSC
Recording
Recording formats
Recordable discs
Recordable time
DVD Video Recording, DVD-VIDEO
DVD+R, DVD+RW
DVD ; Approx. 1 hour (HQ mode), 2 hours (SP mode), 4 hours (EP mode),
6 hours (SLP mode)
VCR ; SP: 2 hours (T-120), SLP: 6 hours (T-120)/8 hours (T-160)
Video recording format
Sampling frequency
Compression format
27MHz
MPEG 2
Audio recording format
Sampling frequency
Compression format
48kHz
MPEG1 Layer2
VCR Specifications
Head system
Timer
Tape speed
Tape width
Rewind time
Antenna
VHF output signal
Channel coverage
Frequency range
Signal-to-noise ratio
Dynamic range
Channel separation
4 Head Video, 2 Head Hi-Fi helical scan azimuth system
12-hour display type with AM, PM
SP: 33.35 mm/sec, SLP: 16.67 mm/sec, EP: 11.12 mm/sec
12.7 mm
less than 2 minutes (T-120)
75 ohms (VHF/UHF)
Channel 3 or 4 (Switchable)
VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)
20Hz to 20kHz
43 dB
75 dB
45 dB
DVD Specifications
Laser system
Frequency response
Signal-to-noise ratio
Harmonic distortion
Dynamic range
Semiconductor laser, wavelength 650 nm
DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHz
More than 95 dB
Less than 0.008%
More than 90 dB
Inputs
Antenna or CATV input, 75 Ω
1.0 Vp-p 75 Ω, sync negative, RCA jack x 2
-6 dBm more than 47 k, RCA jack (L, R) x 2
REFERENCE
ANTENNA IN
VIDEO IN
AUDIO IN
63
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지64
Technical Specifications
Outputs
VIDEO OUT
S-VIDEO OUT (Y)
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
Audio output (digital audio)
Audio output (analog audio)
RF OUT
1 Vp-p 75 Ω, sync negative, RCA jack x 1
1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
0.5 V (p-p), 75 Ω, RCA jack x 1
1.1 Vrms (1 kHz, -6 dB), 600 Ω, RCA jack (L, R) x 2
Channel 3 or 4 (Switchable)
Design and specifications are subject to change without notice.
Accessories
Video cable ............................................. 1
Audio cable ............................................. 1
RF Coaxial Cable ..................................... 1
Blank DVD+RW disc ............................... 1
Remote control ....................................... 1
Batteries ................................................. 2
Manufactured under license from Dolby Laboratories. ‘Dolby‘, ‘Pro Logic‘ and the double-D symbol are
trademarks of Dolby Laboratories.
DTS and DTS Digital Out are registered trademarks of Digital Theater Systems, Inc.
64
Downloaded From Disc-Player.com Daewoo Manuals
DF-L72G1N-LS(GB) 04.7.1 3:22 AM 페이지65
P/N : 97P95600N0-C6
Downloaded From Disc-Player.com Daewoo Manuals
Download PDF