Catalogue Sheet: EAE Series - Aluminum Slim Edge-Lit

Catalogue Sheet: EAE Series - Aluminum Slim Edge-Lit
Project/Location:
Contractor:
EAE Series
Date:
Aluminum Slim Edge-Lit
Pictogram Sign
Prepared by:
TYPICAL SPECIFICATIONS
FEATURES
Supply and install the Emergi-Lite® EAE Series slim-profile pictogram
Edge-Lit Exit Sign. The unit shall operate with universal 2-wire AC
input voltage of 120 to 347VAC at less than 3W and universal 2-wire
DC input voltage from 6 to 24VDC at less than 2.5W. The housing
assembly shall be constructed of extruded aluminum with textured
finish and
colour. The canopy shall be of Die-Cast aluminum
and allow for wall, end, or ceiling mount. The legend shall be printed
on a pure-acrylic panel. The panel shall come standard with doubleface legend, for single-face and double-face applications. The light
source shall be long-life white light-emitting diodes (LED) and shall
provide even illumination in normal and emergency operation. The
pictogram Edge-Lit Exit Sign in a Self-Powered configuration shall
use a sealed Nickel-Cadmium battery of 2.4V nominal voltage and
shall stay
illuminated during emergency operation for at least two hours upon
AC failure.
• Slim-profile extruded aluminum housing
• Low-profile EZ2 Die-Cast aluminum canopy
• Universal surface mounting – wall, ceiling or end mount
• Click-to-open housing door allows easy access to the panel and
electrical wiring
• Extruded acrylic panel with pictogram legend
• Comes with double-face panels for use in single-face and
double-face applications
• Long-life white LED light source
• Meets or exceeds CSA.222 No.141-10
• Universal AC input: two-wire 120 to 347VAC; standard DC input:
two-wire 6 to 24VDC
• Energy efficient – consumes less than 3W in AC or DC-remote
mode
The pictogram Edge-Lit Exit Sign shall be listed CSA 22.2 No.141-10.
• Self-Powered models provide minimum two hours of
emergency lighting
The equipment shall be Emergi-Lite® Model:
.
DIMENSIONS
Dimensions are approximate and subject to change.
DC SPECS
AC-only
Less than
3W
-
-
AC/DC
standard
120 to
347VAC
Less than
3W
6 to 24VDC
Less than
2.5W
AC/48VDC
120 to
347VAC
Less than
3W
48VDC
2W
AC/120VDC
120 to
347VAC
Less than
3W
120VDC
4.7W
Two-wire
120V AC/DC
120VAC
Less than
3.5W
120VDC
Less than
3.5W
Nickel-Cadmium
battery
Minimum 2
hours
Self-Powered 120 to 347VAC Less than 4W
95/8” [24.4 cm]
AC SPECS
120 to
347VAC
< PICTOGRAM
LEFT FROM HERE
PICTOGRAM >
RIGHT FROM HERE
41/4” [10.7 cm]
12” [30.5 cm]
101/8” [25.7 cm]
MODEL
105/8” [27.0 cm]
POWER CONSUMPTION
121/2” [31.9 cm]
103/4” [27.3 cm]
105/8” [27.0 cm]
15/8” [4.2 cm]
PICTOGRAM
STRAIGHT FROM
HERE
ORDERING INFORMATION
SERIES
EAE= extruded aluminum edge-lit pictogram
exit sign
FACES / ARROW
(UNIVERSAL MOUNTING)
1= one face, no arrow
L= single face left arrow
R= single face right arrow
2= two faces, no arrow
A= two faces, arrow left or right
COLOUR
TA= textured aluminum
OW= off-white
VOLTAGE
AC= 120 to 347VAC only
U= 120 to 347VAC; 6 to 24VDC
UI= 1
20 to 347VAC Self-Powered*
U48= 120 to 347VAC; 48VDC
U120= 120 to 347VAC; 120VDC
2120= 2 wires 120VAC/VDC
*Self-Powered (120 min. time base)
EXAMPLE: EAE2OWAC
20
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement