Timers - ProgramaCube
Series Included
Relay Output - Single
KRPD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
KRPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Power Relay Output
Timers (ProgramaCube)
2
HRPD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HRID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HRPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
HRIS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
HRPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
HRIU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Solid-State Output - Dual
HSPZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Solid-State Output
KSPD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
KSPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
KSPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Power Solid-State Output
NHPD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
NHPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
NHPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
www.ssac.com • 800-843-8848 • fax: 605-348-5685
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Timer
KRPD Series
The KRPD Series is a factory programmed time
delay relay available with 1 of 12 standard dual
functions. The time delays can be factory fixed,
onboard or externally adjustable or a combination
of fixed and adjustable. The SPDT output relay
contacts offer a full 10A rating with complete
isolation . Its microcontroller timing circuit
provides excellent repeat accuracy and stability.
Encapsulation protects against shock, vibration,
and humidity. The KRPD Series is a cost effective
approach for OEM applications that require small
size, isolation, accuracy and long life.
See Appendix B, page 165, Figure 1 for dimensional
drawing .
Connection:
L1
Output Current/Ambient Temperature:
N/L2
Features:
• Choose 1 of 12 standard dual functions
• Special time ranges & functions available
• Factory programmed
• Microcontroller circuitry, ±0.5% repeat
accuracy
• Isolated, 10A, SPDT output contacts
• Input voltage from 12 to 240V in 2 ranges
• Delays from 100ms - 1000h in 9 ranges
Approvals:
Auxiliary Products:
• External ad just potentiometer:
P/N: P1004-95
P/N: P1004-95-X
• Versa-knob: P/N: P0700-7
• Female quick connect:
P/N: P1015-64 (AWG 14/16)
• Quick connect to screw adaptor:
P/N: P1015-18
• DIN rail: P/N: C103PM (Al)
• DIN rail adaptor: P/N: P1023-20
Available Models:
KRPDA2825AMI
KRPD12121MB
KRPDA3232MB
KRPD215S190SMB
KRPDA3434MB
KRPD417M113MRXD
KRPDD2121MB
KRPDA11M14MRXE
KRPDD3232RXE
KRPDA175S130SMI
KRPDA2222RXE
If desired part number is not listed, please call us to
see if it is technically possible to build .
V = Voltage
C = Common, Transfer Contact
NC = Normally Closed
NO = Normally Open
S1 = Initiate Switch
UTL = Untimed Load
A knob is supplied for adjustable units
or RT terminals for external adjust. The
untimed load is optional . S1 is not used
for some functions.
Order Table:
KRPD
X
Input
─A - 24 to 240VAC/DC
─D - 12 to 48VDC
─1 - 12VDC
─2 - 24VAC
─4 - 120VAC
─9 - 230VAC
X
First Adjustment
(T1 or RT1)
X
First Time Delay*
X
Second Adjustment
(T2 or RT2)
X
Second Time Delay*
X
Function
─1 - 0.1 - 10s
─1 - 0.1 - 10s
─Specify function
─2 - 1 - 100s
─2 - 1 - 100s
─1 - Fixed
─3 - 10 - 1000s
─3 - 10 - 1000s
─2 - Onboard adjust
Functions:
─4 - 0.1 - 10m
─4 - 0.1 - 10m
─3 - External adjust
MB, MRE, MI, MS,
─5 - 1 - 100m
─5 - 1 - 100m
IRE, BRE, SRE, RXE,
─6 - 10 - 1000m
─6 - 10 - 1000m
RXD, IM, AMI, SL
─7 - 0.1 - 10h
─7 - 0.1 - 10h
─8 - 1 - 100h
─8 - 1 - 100h
─9 - 10 - 1000h
─9 - 10 - 1000h
*If fixed delay is selected, insert delay (0 .1-999)
For a complete list of functions with descriptions and diagrams,
followed by (S) secs., or (M) mins., or (H) hrs.
see Appendix A - Timer Functions, pages 156-164.
─1 - Fixed
─2 - Onboard adjust
─3 - External adjust
Specifications
Time Delay
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Microcontroller circuitry
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1s - 1000h in 9 adjustable ranges or fixed (to 999)
Repeat Accuracy . . . . . . . . . . . . . . . . . . ±0.5% or 20ms, whichever is greater
Tolerance (Factory Calibration) . . . . . . ≤ ±2%
Reset Time . . . . . . . . . . . . . . . . . . . . . . . . ≤ 150ms
Initiate Time . . . . . . . . . . . . . . . . . . . . . . ≤ 40ms; 750 operations per minute
Time Delay vs Temp. & Voltage . . . . . ≤ ±2%
Input
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 to 48VDC; 24 to 240VAC/DC
Tolerance
12 to 48VDC . . . . . . . . -15% - 20%
24 to 240VAC/DC . . . . . . . . -20% - 10%
AC Line Frequency / DC Ripple . . . . . 50/60 Hz / ≤ 10%
Power Consumption . . . . . . . . . . . . . . . AC ≤ 2VA; DC ≤ 2W
Output
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Isolated relay contacts
Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SPDT
www.ssac.com • 800-843-8848 • fax: 605-348-5685
Rating (at 40°C) . . . . . . . . . . . . . . . . . . . 10A resistive @ 125VAC
5A resistive @ 230VAC & 28VDC
1/4 hp @ 125VAC
Max. Switching Voltage . . . . . . . . . . . . 250VAC
Life (Operations) . . . . . . . . . . . . . . . . . . Mechanical - 1 x 107; Electrical - 1 x 105
Protection
Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . Encapsulated
Isolation Voltage . . . . . . . . . . . . . . . . . . ≥ 1500V RMS input to output
Insulation Resistance . . . . . . . . . . . . . . . ≥ 100 MΩ
Polarity . . . . . . . . . . . . . . . . . . . . . . . . . . DC units are reverse polarity protected
Mechanical
Mounting . . . . . . . . . . . . . . . . . . . . . . . . Surface mount with one #10 (M5 x 0.8) screw
Dimensions . . . . . . . . . . . . . . . . . . . . . . . 2 x 2 x 1.21 in. (50.8 x 50.8 x 30.7 mm)
Termination . . . . . . . . . . . . . . . . . . . . . . 0.25 in. (6.35 mm) male quick connects
Environmental
Operating / Storage Temperature . . . -40° to 60°C / -40° to 85°C
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . 95% relative, non-condensing
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . ≅ 2.6 oz (74 g)
3
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Timer
KRPS Series
The KRPS Series is a factory programmed time
delay relay available with 1 of 15 functions and
measures only 2 inches square. The KRPS offers
a wide range of fixed, onboard, or externally
adjustable time delays. The output relay contacts
offer a full 10A rating with complete isolation. Its
microcontroller timing circuit provides excellent
repeat accuracy and stability . Encapsulation
protects against shock, vibration, and humidity.
The KRPS Series is a cost effective approach for
OEM applications that require small size, isolation,
accuracy, and long life. Special time ranges and
functions are available.
See Appendix B, page 165, Figure 1 for dimensional
drawing .
Connection:
L1
Output Current/Ambient Temperature:
N/L2
Features:
• Choose 1 of 15 standard functions
• Special time ranges & functions available
• Factory programmed
• Microcontroller circuitry, ±0.5% repeat
accuracy
• Isolated, 10A, SPDT output contacts
• Input voltage from 12 to 240V in 2 ranges
• Delays from 0.1s - 1000h in 9 ranges
Approvals:
Auxiliary Products:
• External ad just potentiometer:
P/N: P1004-95
P/N: P1004-95-X
• Versa-knob: P/N: P0700-7
• Female quick connect:
P/N: P1015-64 (AWG 14/16)
• Quick connect to screw adaptor:
P/N: P1015-18
• DIN rail: P/N: C103PM (Al)
• DIN rail adaptor: P/N: P1023-20
Available Models:
KRPSD10.1SF
KRPS1110SM
KRPSD10.1SM
KRPS4160MM
KRPSD10.5SS
KRPS425M
KRPSD12STS
KRPS913MB
KRPSD13SB
KRPSA10.1SFT
KRPSD21B
KRPSA10.5SFT
KRPSD21M
KRPSA110SM
KRPSD22M
KRPSA12MM
KRPSD22PSD
KRPSA12SM
KRPSD22S
KRPSA15SM
KRPSD24B
KRPSA21RE
KRPSD24M
KRPSA22B
KRPSD25B
KRPSA22PSD
KRPSD25S
KRPSA24M
KRPSA28PSE
If desired part number is not listed, please call us to
see if it is technically possible to build .
V = Voltage
C = Common, Transfer Contact
NC = Normally Closed
NO = Normally Open
S1 = Initiate Switch
UTL = Untimed Load
A knob is supplied for adjustable units, or
RT terminals 4 & 5 for external adjust. See
external adjustment vs. time delay chart. The
untimed load is optional. S1 is not used for
some functions.
Order Table:
KRPS
X
Input
─A - 24 to 240VAC/DC
─D - 12 to 48VDC
─1 - 12VDC
─4 - 120VAC
─9 - 230VAC
X
Adjustment
─1 - Fixed
─2 - Onboard adjust
─3 - External adjust
*If fixed delay is selected,
insert delay (0 .1-1000)
followed by (S) secs.,
(M) mins., or (H) hrs.
X
Delay*
─1 - 0.1 - 10s
─2 - 1 - 100s
─3 - 10 - 1000s
─4 - 0.1 - 10m
─5 - 1 - 100m
─6 - 10 - 1000m
─7 - 0.1 - 10h
─8 - 1 - 100h
─9 - 10 - 1000h
X
Function
─Specify function
Functions:
M, B, RE, RD, S, SD, I,
TS, US, UB, AM, PSD,
FT, F, SF
For a complete list of functions with descriptions and diagrams,
see Appendix A - Timer Functions, pages 156-164.
Specifications
Time Delay
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Repeat Accuracy . . . . . . . . . . . . . . . . . . . . . .
Tolerance (Factory Calibration) . . . . . . . . . .
Reset Time . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Initiate Time . . . . . . . . . . . . . . . . . . . . . . . . . .
Time Delay vs Temp. & Voltage . . . . . . . . .
Input
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tolerance
12 to 48VDC . . . . . . . . . . .
24 to 240VAC/DC . . . . . . . . . .
AC Line Frequency / DC Ripple . . . . . . . . .
Power Consumption . . . . . . . . . . . . . . . . . . .
Output
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rating (at 40°C) . . . . . . . . . . . . . . . . . . . . . . .
4
Microcontroller circuitry
0.1s - 1000h in 9 adjustable ranges or fixed
±0.5% or 20ms, whichever is greater
≤ ±2%
≤ 150ms
≤ 40ms; ≤ 750 operations per minute
≤ ±2%
12 to 48VDC; 24 to 240VAC/DC
-15% - 20%
-20% - 10%
50/60Hz / ≤ 10%
AC ≤ 2VA; DC ≤ 2W
Isolated relay contacts
SPDT
10A resistive @ 125VAC
5A resistive @ 230VAC & 28VDC
1/4 hp @ 125VAC
Max. Switching Voltage . . . . . . . . . . . . . . . .
Life (Operations) . . . . . . . . . . . . . . . . . . . . . .
Protection
Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Isolation Voltage . . . . . . . . . . . . . . . . . . . . . .
Insulation Resistance . . . . . . . . . . . . . . . . . . .
Polarity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mechanical
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . .
Termination . . . . . . . . . . . . . . . . . . . . . . . . . .
Environmental
Operating / Storage Temperature. . . . . . . .
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
250VAC
Mechanical - 1 x 107; Electrical - 1 x 105
Encapsulated
≥ 1500V RMS input to output
≥ 100 MΩ
DC units are reverse polarity protected
Surface mt. with one #10 (M5 x 0.8) screw
2 x 2 x 1.21 in (50.8 x 50.8 x 30.7 mm)
0.25 in. (6.35 mm) male quick connects
-40° to 60°C / -40° to 85°C
95% relative, non-condensing
≅ 2.6 oz (74 g)
www.ssac.com • 800-843-8848 • fax: 605-348-5685
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Timer
HRID / HRPD Series
The HRID/HRPD Series combines an
electromechanical relay with microcontroller
timing circuitry. It is a factory programmed module
available in any 1 of 12 standard functions. It offers
12 to 240V operation in two universal ranges and
factory fixed, onboard or externally adjustable time
delays with a repeat accuracy of ±0.5%. The high
switching capacity of the output contacts allow
for direct control of heavy loads like compressors,
pumps, motors, heaters, and lighting. HRPD has
non-isolated SPDT relay contacts, and the HRID
has isolated SPDT relay contacts. An excellent
choice for OEM applications where cost is a
factor. Both offer dual functions in one convenient
package.
See Appendix B, page 165, Figure 2 for dimensional
drawing .
Connection:
L1
L1
N/L2
N/L2
HRID
HRPD
Relay contacts are
isolated .
Relay contacts are
non-isolated.
Features:
• Special time ranges & functions available
• Factory programmed
• 30A, SPDT, NO output contacts
• 12 to 240V operation in 2 ranges
• Delays from 0.1s - 1000h in 9 ranges
• ±0.5% repeat accuracy
Approvals:
Auxiliary Products:
• External ad just potentiometer:
P/N: P1004-95
P/N: P1004-95-X
• Versa-knob: P/N: P0700-7
• Quick connect to screw adaptor:
P/N: P1015-18
• Female quick connect:
P/N: P1015-13 (AWG 10/12)
P/N: P1015-64 (AWG 14/16)
• Mounting bracket: P/N: P1023-6
• DIN rail: P/N: C103PM (Al)
• DIN rail adaptor: P/N: P1023-20
Available Models:
HRPDD2225RXE
If desired part number is not listed, please call us to
see if it is technically possible to build .
S1 = Initiate Switch
UTL = Optional Untimed Load
NO = Normally Open
NC = Normally Closed
C = Common
RT is used when external
adjustment is ordered.
Order Table:
HRID /
HRPD
X
Input
─W - 24 to 240VAC
24 to 110VDC
─D - 12 to 48VDC
X
First Adjustment
(T1 or RT1)
X
First Time Delay*
X
Second Adjustment
(T2 or RT2)
X
Second Time Delay*
X
Function
─1 - 0.1 - 10s
─1 - 0.1 - 10s
─Specify function
─2 - 1 - 100s
─2 - 1 - 100s
─1 - Fixed
─3 - 10 - 1000s
─3 - 10 - 1000s
─2 - Onboard adjust
Functions:
─4 - 0.1 - 10m
─4 - 0.1 - 10m
─3 - External adjust
MB, MRE, MI, MS,
─5 - 1 - 100m
─5 - 1 - 100m
IRE, BRE, SRE, RXE,
─6 - 10 - 1000m
─6 - 10 - 1000m
RXD, IM, AMI, SL
─7 - 0.1 - 10h
─7 - 0.1 - 10h
─8 - 1 - 100h
─8 - 1 - 100h
─9 - 10 - 1000h
─9 - 10 - 1000h
*If fixed delay is selected, insert delay (0 .1-999)
For a complete list of functions with descriptions and diagrams,
followed by (S) secs., or (M) mins., or (H) hrs.
see Appendix A - Timer Functions, pages 156-164.
─1 - Fixed
─2 - Onboard adjust
─3 - External adjust
Specifications
Time Delay
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Repeat Accuracy . . . . . . . . . . . . . . . . . . . . .
Tolerance (Factory Calibration) . . . . . . . . .
Reset Time . . . . . . . . . . . . . . . . . . . . . . . . . . .
Initiate Time . . . . . . . . . . . . . . . . . . . . . . . . .
Time Delay vs. Temp. & Voltage . . . . . . . .
Input
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tolerance
2 to 48VDC . . . . . . . .
24 to 110VDC/24 to 240VAC . . . . . . . .
AC Line Frequency . . . . . . . . . . . . . . . . . . .
Power Consumption . . . . . . . . . . . . . . . . . .
Output
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ratings:
General Purpose
125/240VAC
Resistive
125/240VAC
28VDC
0.1s - 1000h in 9 adjustable ranges or fixed
±0.5% or 20ms, whichever is greater
±2%
≤ 150ms
≤ 20ms; ≤ 1500 operations per minute
≤ ±2%
12 to 48VDC; 24 to 240VAC/24 to 110VDC
-15% - 20%
-20% - 10%
50/60Hz
AC ≤ 4VA; DC ≤ 2W
Electromechanical relay
SPDT
SPDT-N.O
SPDT-NC
30A
15A
30A
15A
20A
10A
www.ssac.com • 800-843-8848 • fax: 605-348-5685
Motor Load
125VAC
1 hp*
1/4 hp**
240VAC
2 hp**
1 hp**
6
Life (Operations) . . . . . . . . . . . . . . . . . . . . . Mechanical - 1 x 10
5
Electrical - 1 x 10 , *3 x104, **6,000
Protection
Surge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IEEE C62.41-1991 Level A
Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . Encapsulated
Isolation Voltage . . . . . . . . . . . . . . . . . . . . . ≥1500V RMS input to output; isolated units
Insulation Resistance . . . . . . . . . . . . . . . . . . ≥100 MΩ
Polarity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC units are reverse polarity protected
Mechanical
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . Surface mt. with one #10 (M5 x 0.8) screw
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . 3 x 2 x 1.5 in. (76.7 x 51.3 x 38.1 mm)
Termination . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 in. (6.35 mm) male quick connects
Environmental
Operating / Storage Temperature. . . . . . . -40° to 60°C / -40° to 85°C
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95% relative, non-condensing
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≅ 3.9 oz (111 g)
5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Timer
HRPS / HRIS Series
The HRPS/HRIS Series combines an
electromechanical relay output with
microcontroller timing circuitry. It is a factory
programmed module available in any 1 of 13
standard functions. It offers 12 to 240V operation
in two universal ranges and factory fixed, onboard,
or external adjustable time delays with a repeat
accuracy of ±0.5%. The output contact rating
allows for direct operation of heavy loads, such as
compressors, pumps, blower motors, heaters, etc.
This series is ideal for OEM applications where
cost is a factor. The HRPS has non-isolated SPDT
relay contacts, and the HRIS has isolated SPDT
relay contacts. Both offer the most popular timer
functions in the industry.
See Appendix B, page 165, Figure 2 for dimensional
drawing .
Connection:
L1
N/L2
L1
N/L2
HRPS
HRIS
Relay contacts are
isolated .
Relay contacts are
non-isolated.
Features:
• 30A, SPDT, NO output contacts
• Factory programmed
• 12 to 240V operation in 2 ranges
• Special time ranges & functions available
• Delays from 0.1s - 1000h in 9 ranges
• ±0.5% repeat accuracy
• ±2% factory calibration
• Fixed, external, or onboard adjustment
Approvals:
Auxiliary Products:
• External ad just potentiometer:
P/N: P1004-95
P/N: P1004-95-X
• Mounting bracket: P/N: P1023-6
• Female quick connect:
P/N: P1015-13 (AWG 10/12)
P/N: P1015-64 (AWG 14/16)
• Quick connect to screw adaptor:
P/N: P1015-18
• Versa-knob: P/N: P0700-7
• DIN rail: P/N: C103PM (Al)
• DIN rail adaptor: P/N: P1023-20
Available Models:
HRISW21FT
HRISW27I
HRPSD12HI
S1 = Initiate Switch
UTL = Untimed Load (optional)
NO = Normally Open
NC = Normally Closed
C = Common
If desired part number is not listed, please call us to
see if it is technically possible to build .
A knob, or terminals 4 & 5 are only included
on adjustable units. RT is used when external
adjustment is ordered.
Order Table:
HRPS /
HRIS
X
Input
─W - 24 to 240VAC
24 to 110VDC
─D - 12 to 48VDC
X
Adjustment
─1 - Fixed
─2 - Onboard adjust
─3 - External adjust
*If fixed delay is selected,
insert delay (0 .1-1000)
followed by (S) secs.,
(M) mins., or (H) hrs.
X
Time Delay*
─1 - 0.1 - 10s
─2 - 1 - 100s
─3 - 10 - 1000s
─4 - 0.1 - 10m
─5 - 1 - 100m
─6 - 10 - 1000m
─7 - 0.1 - 10h
─8 - 1 - 100h
─9 - 10 - 1000h
X
Function
─Specify function
Functions:
M, B, RE, RD, S, SD,
I, TS, US, UB, AM,
PSD, FT
For a complete list of functions with descriptions and diagrams,
see Appendix A - Timer Functions, pages 156-164.
Specifications
Time Delay
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Microcontroller circuitry
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1s - 1000h in 9 adjustable ranges or fixed
Repeat Accuracy . . . . . . . . . . . . . . . . . . . . . ±0.5% or 20ms, whichever is greater
Tolerance (Factory Calibration) . . . . . . . . . ±2%
Reset Time . . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ 150ms
Initiate Time . . . . . . . . . . . . . . . . . . . . . . . . . ≤ 20ms
Time Delay vs Temp. & Voltage . . . . . . . . ±2%
Input
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 to 48VDC; 24 to 240VAC/24 to 110VDC
Tolerance
12 to 48VDC . . . . . . . -15% - 20%
24 to 110VDC/240VAC . . . . . . . -20% - 10%
AC Line Frequency . . . . . . . . . . . . . . . . . . . 50/60Hz
Power Consumption . . . . . . . . . . . . . . . . . . AC ≤ 4VA; DC ≤ 2W
Output
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electromechanical relay
Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SPDT
SPDT-NO
SPDT-NC
Ratings:
General Purpose
125/240VAC
30A
15A
Resistive
125/240VAC
30A
15A
28VDC
20A
10A
6
Motor Load
125VAC
1 hp*
1/4 hp**
240VAC
2 hp**
1 hp**
6
Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical - 1 x 10
5
Electrical - 1 x 10 , *3 x 104, **6,000
Protection
Surge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IEEE C62.41-1991 Level A
Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . Encapsulated
Isolation Voltage . . . . . . . . . . . . . . . . . . . . . ≥ 1500V RMS input to output; isolated units
Insulation Resistance . . . . . . . . . . . . . . . . . . ≥ 100 MΩ
Polarity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC units are reverse polarity protected
Mechanical
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . Surface mt. with one #10 (M5 x 0.8) screw
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . 3 x 2 x 1.5 in (76.7 x 51.3 x 38.1 mm)
Termination . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 in. (6.35 mm) male quick connects
Environmental
Operating / Storage Temperature. . . . . . . -40° to 60°C / -40° to 85°C
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . 95% relative, non-condensing
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≅ 3.9 oz (111 g)
www.ssac.com • 800-843-8848 • fax: 605-348-5685
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Timer
HRPU / HRIU Series
The HRPU/HRIU Series combines an
electromechanical relay output with
microcontroller timing circuitry. Its switching
capacity allows direct control of loads like
compressors, pumps, motors, heaters, and
lighting. It is a factory programmed module
available in any 1 of 14 standard functions. The
HRPU/HRIU offers a single adjustable timer
or counter function. Switch adjustment allows
accurate selection of the time delay or number
of counts. The HRPU has non-isolated relay
contacts, the HRIU has isolated relay contacts.
Encapsulation protects against shock, vibration,
and humidity. The HRPU/HRIU Series is a cost
effective approach for OEM applications that
require small size, reliability and accurate switch
adjustment.
Connection:
L1
See Appendix B, page 165, Figure 2 for dimensional
drawing .
N/L2
Switch Adjustment:
HRIU
Isolated Output
Features:
• Choose 1 of 14 standard functions
• Special time ranges & functions available
• Factory programmed
• Microcontroller circuitry, ±0.1% repeat
accuracy
• 30A, SPDT, NO output contacts
• Accurate switch adjustment
• 12 to 240V operations in 2 ranges
• Delays from 0.1s - 1023h
Approvals:
Auxiliary Products:
• Female quick connect:
P/N: P1015-13 (AWG 10/12)
P/N: P1015-64 (AWG 14/16)
• Mounting bracket: P/N: P1023-6
• Quick connect to screw adaptor:
P/N: P1015-18
• DIN rail: P/N: C103PM (Al)
• DIN rail adaptor: P/N: P1023-20
Available Models:
HRIUW2I
HRIUW2M
If desired part number is not listed, please call us to
see if it is technically possible to build .
L1
N/L2
HRPU
Non-isolated Output
S1 = Initiate Switch
UTL = Optional Untimed Load
L = Load
V = Voltage
Order Table:
HRPU/
HRIU
X
Input
─W - 24 to 240VAC
24 to 110VDC
─D - 12 to 48VDC
X
Time Delay/Counts
─1 - 0.1 - 102.3s
─2 - 1 - 1023s
─3 - 0.1 - 102.3m
─4 - 1 - 1023m
─5 - 0.1 - 102.3h
─6 - 1 - 1023h
─7 - 1 - 165 counts (straight) w/ pulsed output
─8 - 1 - 1023 counts (binary) w/ pulsed output
─9 - 1 - 7 counts to start 1 - 63s or m interval time
X
Function
─Specify function
Functions:
M, B, RE, RD, S, SD, I,
TS, PSD, US, AM, UB,
C, CI
For a complete list of functions with descriptions and diagrams,
see Appendix A - Timer Functions, pages 156-164.
Specifications
Count Functions/Switch Type . . . . . . . . . . Mechanical switch (counts on switch closure)
Count Range . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1023 counts
Counter Output (Variable 7 & 8) . . . . . . . . . Pulse widths 300ms ±20%
Initiate Time . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ 20ms, ≤ 1500 operations per minute
Time Delay/Range *** . . . . . . . . . . . . . . . . . Adjustable 0.1s - 1023h
Setting Accuracy . . . . . . . . . . . . . . . . . . . . . . ±1%, or 50ms, whichever is greater
Repeat Accuracy . . . . . . . . . . . . . . . . . . . . . . 0.1% or 20ms, whichever is greater
Reset Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ 150ms
Time Delay vs Temp. & Voltage. . . . . . . . . . ±2%
Input
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 to 48VDC; 24 to 240VAC/24 to 110VDC
AC Line Frequency / DC Ripple . . . . . . . . . 50/60Hz / ≤ 10%
Tolerance
12 to 48VDC . . . . . . -15% - 20%
24 to 240VAC/24 to 110VDC . . . . . . -20% - 10%
Power Consumption . . . . . . . . . . . . . . . . . . . AC ≤ 4VA; DC ≤ 2W
Output
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electromechanical relay
Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SPDT
SPDT-NO
SPDT-NC
Ratings:
General Purpose
125/240VAC
30A
15A
Resistive
125/240VAC
30A
15A
28VDC
20A
10A
www.ssac.com • 800-843-8848 • fax: 605-348-5685
1/4 hp**
125VAC
1 hp*
240VAC
2 hp**
1 hp**
Life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mechanical - 1 x 106
Electrical - 1 x 105, *3 x 104, ** 6,000
Protection
Surge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IEEE C62.41-1991 Level A
Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Encapsulated
Isolation Voltage . . . . . . . . . . . . . . . . . . . . . . ≥ 1500V RMS input to output; isolated units
Insulation Resistance . . . . . . . . . . . . . . . . . . . ≥ 100 MΩ
Mechanical
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . Surface mt. with one #10 (M5 x 0.8) screw
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 x 2 x 1.5 in. (76.7 x 51.3 x 38.1 mm)
Termination . . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 in. (6.35 mm) male quick connects
Environmental
Operating / Storage Temperature . . . . . . . -40° to 60°C / -40° to 85°C
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95% relative, non-condensing
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≅ 3.9 oz (111 g)
Motor Load
***For CE approved applications, power must be removed from the unit when a switch
position is changed.
7
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Timer
HSPZ Series
The HSPZ Series is a factory programmed module
available in any 1 of 13 standard functions. The
HSPZ offers dual switch adjustable timer or
counter functions. Switch adjustment allows
accurate selection of the time delay or number
of counts the first time and every time. The
1A steady, 10A inrush rated solid-state output
provides 100 million operations, typical. Its
microcontroller timing circuit provides excellent
repeat accuracy and stability . Encapsulation
protects against shock, vibration, and humidity.
The HSPZ Series is a cost effective approach for
OEM applications that require small size, solid
state reliability, and accurate switch adjustment.
See Appendix B, page 165, Figure 3 for dimensional
drawing .
Connection:
• Choose 1 of 13 standard functions
• Special time ranges & functions available
• Factory programmed
• Microcontroller circuitry, ±0.1% repeat
accuracy
• 1A, solid-state output
• Accurate switch adjustment
• 12 to 240V in 3 options
• Delays from 0.1s - 1023h
• Counts to 1023
Approvals:
Auxiliary Products:
• Female quick connect:
P/N: P1015-64 (AWG 14/16)
P/N: P1015-14 (AWG 18/22)
• Quick connect to screw adaptor:
P/N: P1015-18
• DIN rail: P/N: C103PM (Al)
• DIN rail adaptor: P/N: P1023-20
Switch Adjustment:
(Positive Switching)
(Negative Switching)
L1
Features:
N/L2
Available Models:
HSPZA13MS
HSPZA22SL
If desired part number is not listed, please call us to
see if it is technically possible to build .
S1 = Initiate Switch
UTL = Optional Untimed Load
L = Load
V = Voltage
Order Table:
HSPZ
X
Input
─A - 24 to 240VAC
─P - 12 to 120VDC
positive switching
─N - 12 to 120VDC
negative switching
X
T1 Time Delay/Counts
─1 - 0.1 - 102.3s
─2 - 1 - 1023s
─3 - 0.1 - 102.3m
─4 - 1 - 1023m
─5 - 0.1 - 102.3h
─6 - 1 - 1023h
─7 - 1 - 165 counts (straight)
─8 - 1 -1023 counts (binary)
─9 - 1 - 512m or s
X
T2 Time Delay/Counts
─1 - 0.1 - 102.3s
─2 - 1 - 1023s
─3 - 0.1 - 102.3m
─4 - 1 - 1023m
─5 - 0.1 - 102.3h
─6 - 1 - 1023h
─7 - for future expansion
─8 - for future expansion
─9 - 1 - 512m or s
X
Function
─Specify function
Functions:
MB, MRE, MI, MS,
IRE, BRE, SRE, RXE,
RXD, IM, AMI, SL, CI
For a complete list of functions with descriptions and diagrams,
see Appendix A - Timer Functions, pages 156-164.
Specifications
Time Delay
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Microcontroller circuitry
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1 - 102.3s, m or h in 0.1s, m or h increments
1 - 1023s, m or h in 1s, m or h increments
1 - 512s or m in 1s or m increments
Repeat Accuracy . . . . . . . . . . . . . . . . . . . . . ±0.1% or 20ms, whichever is greater
Setting Accuracy . . . . . . . . . . . . . . . . . . . . . ≤ ±1% or 20ms, whichever is greater
Reset Time . . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ 150ms
Initiate Time . . . . . . . . . . . . . . . . . . . . . . . . . ≤ 20ms
Time Delay vs Temp. & Voltage . . . . . . . . ≤ ±2%
Count Range . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1023 in 2 ranges
Count Rate . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ 25 counts per second
Input
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 to 120VDC; 24 to 240VAC
Tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ ±15%
AC Line Frequency / DC Ripple . . . . . . . . 50/60Hz / ≤ 10%
Power Consumption . . . . . . . . . . . . . . . . . AC ≤ 2VA; DC ≤ 1W
Output
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Solid-state output
Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1A steady, 10A inrush for 16ms
Voltage Drop . . . . . . . . . . . . . . . . . . . . . . . . AC ≅ 2.5V @ 1A; DC ≅ 1V @ 1A
OFF State Leakage Current . . . . . . . . . . . . AC ≅ 5mA @ 240VAC; DC ≅ 1mA
8
Counter Output . . . . . . . . . . . . . . . . . . . . . . Output pulse width: 300ms ±20%
Protection
Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . Encapsulated
Dielectric Breakdown . . . . . . . . . . . . . . . . . ≥ 2000V RMS terminals to mounting surface
Insulation Resistance . . . . . . . . . . . . . . . . . . ≥ 100 MΩ
Polarity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC units are reverse polarity protected
Mechanical
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . Surface mt. with one #10 (M5 x 0.8) screw
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . 3 x 2 x 1.5 in. (76.7 x 51.3 x 38.1 mm)
Termination . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 in. (6.35 mm) male quick connects
Environmental
Operating / Storage Temperature. . . . . . . -40° to 60°C / -40° to 85°C
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95% relative, non-condensing
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≅ 3.9 oz (111 g)
www.ssac.com • 800-843-8848 • fax: 605-348-5685
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Timer
Connection:
L1
N/L2
KSPD Series
The KSPD Series is a factory programmed module
available with 1 of 12 standard dual functions.
The time delays can be factory fixed, externally
or onboard adjustable, or a combination of
fixed and adjustable. The 1A steady, 10A inrush
rated solid-state output provides 100 million
operations, typical. Its microcontroller timing
circuit provides excellent repeat accuracy and
stability. Encapsulation protects against shock,
vibration, and humidity. The KSPD Series is a
cost effective approach for OEM applications that
require small size and long life.
Features:
See Appendix B, page 165, Figure 1 for dimensional
drawing .
Auxiliary Products:
• Choose 1 of 12 standard dual functions
• Special time ranges & functions available
• Factory programmed
• Microcontroller circuitry, ±0.5% repeat
accuracy
• 1A steady, solid-state output , 10A inrush
• 12 to 240V in 3 options
• Delays from 0.1s - 1000h in 9 ranges
Approvals:
• External ad just potentiometer:
P/N: P1004-95
P/N: P1004-95-X
• Versa-knob: P/N: P0700-7
• Female quick connect:
P/N: P1015-64 (AWG 14/16)
• Quick connect to screw adaptor:
P/N: P1015-18
• DIN rail: P/N: C103PM (Al)
• DIN rail adaptor: P/N: P1023-20
(Positive Switching)
(Negative Switching)
Available Models:
KSPDA2222RXE
KSPD32221RXD
KSPDP10.1S31RXE
KSPD4175S130SMS
KSPDP110M18SRXD
KSPD42121MB
KSPDP110M18SRXE
KSPDA110ST00127
KSPDP3131MI
KSPDA114ST00173
KSPDA2121RXE
If desired part number is not listed, please call us to
see if it is technically possible to build .
Terminal Location for
External Adjustment.
V = Voltage
L = Load
S1 = Initiate Switch
UTL = Untimed Load
T1 & RT1 = First Adjustment
T2 & RT2 = Second Adjustment
Order Table:
KSPD
X
Input
─A - 24 to 240VAC
─P - 12 to 120VDC
positive switching
─N - 12 to 120VDC
negative switching
─1 - 120VDC
positive switching
─3 - 24VDC
─4 - 120VAC
X
First Adjustment
(T1 or RT1)
─1 - Fixed
─2 - Onboard adjust
─3 - External adjust
X
First Time Delay*
─1 - 0.1 - 10s
─2 - 1 - 100s
─3 - 10 - 1000s
─4 - 0.1 - 10m
─5 - 1 - 100m
─6 - 10 - 1000m
─7 - 0.1 - 10h
─8 - 1 - 100h
─9 - 10 - 1000h
X
Second Adjustment
(T2 or RT2)
─1 - Fixed
─2 - Onboard adjust
─3 - External adjust
*If fixed delay is selected, insert delay (0 .1-999)
followed by (S) secs., or (M) mins., or (H) hrs.
X
Second Time Delay*
─1 - 0.1 - 10s
─2 - 1 - 100s
─3 - 10 - 1000s
─4 - 0.1 - 10m
─5 - 1 - 100m
─6 - 10 - 1000m
─7 - 0.1 - 10h
─8 - 1 - 100h
─9 - 10 - 1000h
X
Function
─Specify function
Functions:
MB, MRE, MI, MS,
IRE, BRE, SRE, RXE,
RXD, IM, AMI, SL
For a complete list of functions with descriptions and diagrams,
see Appendix A - Timer Functions, pages 156-164.
Specifications
Time Delay
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Microcontroller circuitry
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1s - 1000h in 9 adjustable ranges or fixed (to 999)
Repeat Accuracy . . . . . . . . . . . . . . . . . . . . ±0.5% or 20ms, whichever is greater
Tolerance (Factory Calibration) . . . . . . . . ≤ ±2%
Reset Time . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ 150ms
Initiate Time . . . . . . . . . . . . . . . . . . . . . . . . ≤ 20ms; ≤ 1500 operations per minute
Time Delay vs Temp. & Voltage . . . . . . . ≤ ±2%
Input
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 to 120VDC; 24 to 240VAC
Tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ ±15%
AC Line Frequency / DC Ripple . . . . . . . 50/60Hz / ≤ 10%
Power Consumption . . . . . . . . . . . . . . . . AC ≤ 2VA; DC ≤ 1W
Output
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Solid-state output
Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1A steady, 10A inrush for 16ms
www.ssac.com • 800-843-8848 • fax: 605-348-5685
Voltage Drop . . . . . . . . . . . . . . . . . . . . . . . AC ≅ 2.5V @ 1A; DC ≅ 1V @ 1A
OFF State Leakage Current . . . . . . . . . . . AC ≅ 5mA @ 230VAC; DC ≅ 1mA
Protection
Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . Encapsulated
Dielectric Breakdown . . . . . . . . . . . . . . . . ≥ 2000V RMS terminals to mounting surface
Insulation Resistance . . . . . . . . . . . . . . . . . ≥ 100 MΩ
Polarity . . . . . . . . . . . . . . . . . . . . . . . . . . . . DC units are reverse polarity protected
Mechanical
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . Surface mt. with one #10 (M5 x 0.8) screw
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . 2 x 2 x 1.21 in. (50.8 x 50.8 x 30.7 mm)
Termination . . . . . . . . . . . . . . . . . . . . . . . . 0.25 in. (6.35 mm) male quick connects
Environmental
Operating / Storage Temperature . . . . . -40° to 60°C / -40° to 85°C
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . 95% relative, non-condensing
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≅ 2.4 oz (68 g)
9
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Timer
KSPS Series
The KSPS Series is a factory programmed module
available in any 1 of 14 standard functions. The
KSPS offers a single, fixed, externally or onboard
adjustable time delay. The 1A steady, 10A inrush
rated solid-state output provides 100 million
operations typical . Its microcontroller timing
circuit provides excellent repeat accuracy and
stability. Encapsulation protects against shock,
vibration, and humidity. The KSPS Series is a
cost effective approach for OEM applications that
require small size and solid state reliability.
Features:
• Choose 1 of 14 standard functions
• Special time ranges & functions available
• Factory programmed
• Microcontroller circuitry, ±0.5% repeat
accuracy
• Solid-state output 1A steady, 10A inrush
• Fixed, external, or onboard adjustment
• 12 to 240V in 3 options
• Delays from 0.1s - 1000h in 9 ranges
Approvals:
See Appendix B, page 165, Figure 1 for dimensional
drawing .
Auxiliary Products:
• External ad just potentiometer:
P/N: P1004-95
P/N: P1004-95-X
• Versa-knob: P/N: P0700-7
• Female quick connect:
P/N: P1015-64 (AWG 14/16)
• Quick connect to screw adaptor:
P/N: P1015-18
• DIN rail: P/N: C103PM (Al)
• DIN rail adaptor: P/N: P1023-20
Connection:
L1
N/L2
(Positive Switching)
(Negative Switching)
Available Models:
KSPS121TS
KSPS124PS
KSPS2180SB
KSPS3115SRE
KSPSA21FT
KSPSA23SD
KSPSA24B
L = Load
UTL = Untimed Load
V = Voltage
S1 = Initiate Switch
Order Table:
KSPS
X
Input
─A - 24 to 240VAC
─P - 12 to 120VDC
positive switching
─N - 12 to 120VDC
negative switching
─1 - 12VDC
positive switching
─2 - 24VAC
─3 - 24VDC
positive switching
KSPSA24US
KSPSN110SI
KSPSN21B
KSPSP110SI
KSPSP145SM
KSPSP160MB
If desired part number is not listed, please call us to
see if it is technically possible to build .
X
Adjustment
─1 - Fixed
─2 - Onboard adjust
─3 - External adjust
X
Time Delay*
─1 - 0.1 - 10s
─2 - 1 - 100s
─3 - 10 - 1000s
─4 - 0.1 - 10m
─5 - 1 - 100m
─6 - 10 - 1000m
─7 - 0.1 - 10h
─8 - 1 - 100h
─9 - 10 - 1000h
X
Function
─Specify function
Functions:
M, B, RE, RD, S, SD,
FT I, TS, US, UB, AM,
PS, PSD
*If fixed delay is selected, insert
delay (0 .1-1000) followed by (S)
secs., or (M) mins., or (H) hrs.
For a complete list of functions with descriptions
and diagrams, see Appendix A - Timer Functions,
pages 156-164.
Specifications
Time Delay
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Repeat Accuracy . . . . . . . . . . . . . . . . . . . . . . . . . .
Tolerance (Factory Calibration) . . . . . . . . . . . . . .
Reset Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Initiate Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Time Delay vs Temp. & Voltage . . . . . . . . . . . . .
Input
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AC Line Frequency / DC Ripple . . . . . . . . . . . . .
Power Consumption . . . . . . . . . . . . . . . . . . . . . . .
Output
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10
Microcontroller circuitry
0.1s - 1000h in 9 adjustable ranges or fixed
±0.5% or 20ms, whichever is greater
≤ ±2%
≤ 150ms
≤ 20ms; ≤ 1500 operations per minute
≤ ±2%
12 to 120VDC; 24 to 240VAC
≤ ±15%
50/60Hz / ≤ 10%
AC ≤ 2VA; DC ≤ 1W
Solid-state output
1A steady, 10A inrush for 16ms
Voltage Drop . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OFF State Leakage Current . . . . . . . . . . . . . . . . .
Protection
Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dielectric Breakdown . . . . . . . . . . . . . . . . . . . . . .
Insulation Resistance . . . . . . . . . . . . . . . . . . . . . . .
Polarity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mechanical
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Termination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Environmental
Operating / Storage Temperature . . . . . . . . . . .
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AC ≅ 2.5V @ 1A; DC ≅ 1V @ 1A
AC ≅ 5mA @ 240VAC, DC ≅ 1mA
Encapsulated
≥ 2000V RMS terminals to mounting surface
≥ 100 MΩ
DC units are reverse polarity protected
Surface mt. with one #10 (M5 x 0.8) screw
2 x 2 x 1.21 in. (50.8 x 50.8 x 30.7 mm)
0.25 in. (6.35 mm) male quick connects
-40° to 60°C / -40° to 85°C
95% relative, non-condensing
≅ 2.4 oz (68 g)
www.ssac.com • 800-843-8848 • fax: 605-348-5685
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Timer
KSPU Series
Connection:
L1
The KSPU Series is a factory programmed module
available in any 1 of 14 standard functions. The
KSPU offers a single adjustable timer or counter
function. Switch adjustment allows accurate
selection of the time delay or number of counts
the first time and every time. The 1A steady,
10A inrush rated solid-state output provides 100
million operations, typical. Its microcontroller
timing circuit provides excellent repeat accuracy
and stability . Encapsulation protects against
shock, vibration, and humidity. The KSPU Series
is a cost effective approach for OEM applications
that require small size, solid state reliability, and
accurate switch adjustment.
Features:
See Appendix B, page 165, Figure 1 for dimensional
drawing .
Auxiliary Products:
• Female quick connect:
P/N: P1015-64 (AWG 14/16)
P/N: P1015-14 (AWG 18/22)
• Quick connect to screw adaptor:
P/N: P1015-18
• DIN rail: P/N: C103PM (Al)
• DIN rail adaptor: P/N: P1023-20
Switch Adjustment:
N/L2
• Choose 1 of 14 standard functions
• Special time ranges & functions available
• Factory programmed
• Microcontroller circuitry, ±0.1% repeat
accuracy
• 1A steady, solid-state output, 10A inrush
• Accurate switch adjustment
• 12 to 240V in 3 options
• Delays from 0.1s - 1023h
• Counts 1 to 1023
Approvals:
(Positive Switching)
(Negative Switching)
Available Models:
KSPU11M
KSPUA2I
KSPUA8C
If desired part number is not listed, please call us to
see if it is technically possible to build .
V = Voltage
S1 = Initiate Switch
L = Load
UTL = Untimed Load
Order Table:
KSPU
X
Input
─A - 24 to 240VAC
─P - 12 to 120VDC
positive switching
─N - 12 to 120VDC
negative switching
─1 - 12VDC
positive switching
─4 - 120VAC
─9 - 120/240VAC
X
Time Delay/Counts
─1 - 0.1 - 102.3s
─2 - 1 - 1023s
─3 - 0.1 - 102.3m
─4 - 1 - 1023m
─5 - 0.1 - 102.3h
─6 - 1 - 1023h
─7 - 1 - 165 counts (straight) w/ pulsed output
─8 - 1 - 1023 counts (binary) w/ pulsed output
─9 - 1 - 7 counts to start 1 - 63s or m interval time
X
Function
─Specify function
Functions:
M, B, RE, RD, S, SD, I,
TS, US, UB, AM, PSD,
C, CI
For a complete list of functions with descriptions and diagrams,
see Appendix A - Timer Functions, pages 156-164.
Specifications
Time Delay
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Microcontroller circuitry
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.1 - 102.3s, m or h in 0.1s, m or h increments
1 - 1023s, m or h in 1s, m or h increments
1 - 63s or m in 1s or m increments
Repeat Accuracy . . . . . . . . . . . . . . . . . . . ±0.1% or 20ms, whichever is greater
Setting Accuracy . . . . . . . . . . . . . . . . . . . ≤ ±1% or 20ms, whichever is greater
Reset Time . . . . . . . . . . . . . . . . . . . . . . . . . ≤ 150ms
Initiate Time . . . . . . . . . . . . . . . . . . . . . . . ≤ 20ms
Time Delay vs Temp. & Voltage . . . . . . ≤ ±2%
Count Range . . . . . . . . . . . . . . . . . . . . . . . 1 - 1023 in 3 ranges
Count Rate . . . . . . . . . . . . . . . . . . . . . . . . ≤ 25 counts per second
Input
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 to 120VDC; 24 to 240VAC
Tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ ±15%
AC Line Frequency / DC Ripple . . . . . . 50/60 Hz / ≤ 10%
Power Consumption . . . . . . . . . . . . . . . . AC ≤ 2VA; DC ≤ 1W
Output
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Solid-state output
Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1A steady, 10A inrush for 16ms
Voltage Drop . . . . . . . . . . . . . . . . . . . . . . AC ≅ 2.5V @ 1A; DC ≅ 1V @ 1A
www.ssac.com • 800-843-8848 • fax: 605-348-5685
OFF State Leakage Current . . . . . . . . . . AC ≅ 5mA @ 240VAC; DC ≅ 1mA
Counter Output . . . . . . . . . . . . . . . . . . . . Output pulse width: 300ms ±20%
Time Delay/Counts Variable 7 & 8
Protection
Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . Encapsulated
Dielectric Breakdown . . . . . . . . . . . . . . . . . . .≥ 2000V RMS terminals to mounting surface
Insulation Resistance . . . . . . . . . . . . . . . . ≥ 100 MΩ
Polarity . . . . . . . . . . . . . . . . . . . . . . . . . . . DC units are reverse polarity protected
Mechanical
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . Surface mt. with one #10 (M5 x 0.8) screw
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . 2 x 2 x 1.21 in. (50.8 x 50.8 x 30.7 mm)
Termination . . . . . . . . . . . . . . . . . . . . . . . 0.25 in. (6.35 mm) male quick connects
Environmental
Operating / Storage Temperature. . . . . -40° to 60°C / -40° to 85°C
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . 95% relative, non-condensing
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≅ 2.4 oz (68 g)
11
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Timer
NHPD Series
The NHPD Series is a factory programmed module
available in any 1 of 12 standard dual functions.
The time delays can be factory fixed, externally or
onboard adjustable, or a combination of fixed and
adjustable. The NHPD includes a high current
solid-state output. It can switch motors, lamps
and heaters directly without the addition of a
contactor. It can switch up to 20A with up to 100
million operations typical . Its microcontroller
timing circuit provides excellent repeat accuracy
and stability . Encapsulation protects against
shock, vibration, and humidity. The NHPD Series
is a cost effective approach for OEM applications
that require small size and long life.
See Appendix B, page 165, Figure 4 for dimensional
drawing .
Connection:
L1
N/L2
Features:
• High load currents up to 20A, 200A inrush
• Factory programmed
• Choose 1 of 12 standard dual functions
• Special time ranges & functions available
• Microcontroller circuitry, ±0.5% repeat
accuracy
• Fixed, external, or onboard adjustment
• 24 to 240VAC
• Delays from 0.1s - 1000h in 9 ranges
Approvals:
Auxiliary Products:
• External ad just potentiometer:
P/N: P1004-95
P/N: P1004-95-X
• Versa-knob: P/N: P0700-7
• Female quick connect:
P/N: P1015-13 (AWG 10/12)
P/N: P1015-64 (AWG 14/16)
• Quick connect to screw adaptor:
P/N: P1015-18
Available Models:
There are no part numbers currently active. Please call
Technical Support with your requirements.
Terminal Location for
External Adjustment
V = Voltage
L = Load
S1 = Initiate Switch
UTL = Untimed Load
T1 & RT1 = First Adjustment
T2 & RT2 = Second Adjustment
Order Table:
NHPD
X
Output Rating
─A - 6A
─B - 10A
─C - 20A
X
Input Voltage
─A - 24 to 240VAC
X
First Adjustment
(T1 or RT1)
X
First Time Delay*
X
Second Adjustment
(T2 or RT2)
X
Second Time Delay*
X
Function
─1 - 0.1 - 10s
─1 - 0.1 - 10s
─Specify function
─2 - 1 - 100s
─2 - 1 - 100s
─1 - Fixed
─3 - 10 - 1000s
─3 - 10 - 1000s
Functions:
─2 - Onboard adjust
─4 - 0.1 - 10m
─4 - 0.1 - 10m
MB, MRE, MI,
─3 - External adjust
─5 - 1 - 100m
─5 - 1 - 100m
MS, IRE, BRE,
─6 - 10 - 1000m
─6 - 10 - 1000m
SRE, RXE, RXD,
─7 - 0.1 - 10h
─7 - 0.1 - 10h
IM, AMI, SL
─8 - 1 - 100h
─8 - 1 - 100h
─9 - 10 - 1000h
─9 - 10 - 1000h
*If fixed delay is selected, insert delay (0 .1-999)
For a complete list of functions with descriptions and diagrams,
followed by (S) secs., or (M) mins., or (H) hrs.
see Appendix A - Timer Functions, pages 156-164.
─1 - Fixed
─2 - Onboard adjust
─3 - External adjust
Specifications
Time Delay
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Microcontroller circuitry
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1s - 1000h in 9 adjustable ranges or fixed (to 999)
Repeat Accuracy . . . . . . . . . . . . . . . . . . . . . . . . . ±0.5% or 20ms, whichever is greater
Tolerance (Factory Calibration) . . . . . . . . . . . . . ≤ ±2%
Reset Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ 150ms
Initiate Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ 20ms; ≤ 1500 operations per minute
Time Delay vs Temp. & Voltage . . . . . . . . . . . . ≤ ±2%
Input
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 to 240VAC
Tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ ±15%
AC Line Frequency . . . . . . . . . . . . . . . . . . . . . . . 50/60Hz
Output
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Solid state
Rating
Output
Steady State
Inrush**
A
6A
60A
B
10A
100A
C
20A
200A
Minimum Load Current . . . . . . . . . . . . . . . . . . . 100mA
12
Voltage Drop . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≅ 2.5V @ rated current
OFF State Leakage Current . . . . . . . . . . . . . . . . ≅ 5mA @ 230VAC
Protection
Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Encapsulated
Dielectric Breakdown . . . . . . . . . . . . . . . . . . . . . ≥ 2000V RMS terminals to mounting surface
Insulation Resistance . . . . . . . . . . . . . . . . . . . . . . ≥ 100 MΩ
Mechanical
Mounting ** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Surface mt with one #10 (M5 x 0.8) screw
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x 2 x 1.51 in. (50.8 x 50.8 x 38.4 mm)
Termination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 in. (6.35 mm) male quick connects
Environmental
Operating / Storage Temperature . . . . . . . . . . -40° to 60°C / -40° to 85°C
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95% relative, non-condensing
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≅ 3.9 oz (111 g)
**Must be bolted to a metal surface using the included heat sink compound. The maximum
mounting surface temperature is 90°C. Inrush: Non-repetitive for 16ms.
www.ssac.com • 800-843-8848 • fax: 605-348-5685
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Timer
NHPS Series
The NHPS Series is a factory programmed module
available in any 1 of 13 standard functions. The
NHPS offers a single, fixed, onboard adjustment
or an externally adjustable time delay. The NHPS
includes a high current solid-state output. It can
switch motors, lamps and heaters directly without
the addition of a contactor. It can switch up to
20A with up to 100 million operations typical. Its
microcontroller timing circuit provides excellent
repeat accuracy and stability . Encapsulation
protects against shock, vibration, and humidity.
The NHPS Series is a cost effective approach for
OEM applications that require small size and solid
state reliability .
See Appendix B, page 165, Figure 4 for dimensional
drawing .
Connection:
L1
N/L2
Features:
• High load currents up to 20A, 200A inrush
• Factory programmed
• Choose 1 of 13 standard functions
• Special time ranges & functions available
• Microcontroller circuitry, ±0.5% repeat
accuracy
• Fixed, external, or onboard adjustment
• 24 to 240VAC
• Delays from 0.1s - 1000h in 9 ranges
Approvals:
Auxiliary Products:
• External ad just potentiometer:
P/N: P1004-95
P/N: P1004-95-X
• Versa-knob: P/N: P0700-7
• Female quick connect:
P/N: P1015-13 (AWG 10/12)
P/N: P1015-64 (AWG 14/16)
• Quick connect to screw adaptor:
P/N: P1015-18
Available Models:
There are no part numbers currently active. Please call
Technical Support with your requirements.
Terminal Location for
External Adjustment
V = Voltage
S1 = Initiate Switch
UTL = Untimed Load
L = Load
Order Table:
NHPS
X
Output Rating
─A - 6A
─B - 10A
─C - 20A
X
Input
─A - 24 to 240VAC
X
Adjustment
─1 - Fixed
─2 - Onboard adjust
─3 - External adjust
X
Time Delay*
─1 - 0.1 - 10s
─2 - 1 - 100s
─3 - 10 - 1000s
─4 - 0.1 - 10m
─5 - 1 - 100m
─6 - 10 - 1000m
─7 - 0.1 - 10h
─8 - 1 - 100h
─9 - 10 - 1000h
X
Function
─Specify function
Functions:
M, B, RE, RD, S,
SD, I, TS, US, UB,
AM, FT, PSD
For a complete list of functions with descriptions and diagrams,
see Appendix A - Timer Functions, pages 156-164.
*If fixed delay is selected, insert delay (0 .1-1000)
followed by (S) secs., or (M) mins., or (H) hrs.
Specifications
Time Delay
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Microcontroller circuitry
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1s - 1000h in 9 adjustable ranges or fixed
Repeat Accuracy . . . . . . . . . . . . . . . . . . . ±0.5% or 20ms, whichever is greater
Tolerance (Factory Calibration) . . . . . . . ≤ ±2%
Reset Time . . . . . . . . . . . . . . . . . . . . . . . . . ≤ 150ms
Initiate Time . . . . . . . . . . . . . . . . . . . . . . . ≤ 20ms; ≤ 1500 operations per minute
Time Delay vs Temp. & Voltage . . . . . . ≤ ±2%
Input
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 to 240VAC
Tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ ±15%
AC Line Frequency . . . . . . . . . . . . . . . . . 50/60Hz
Output
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Solid state
Rating
Output
Steady State
Inrush**
A
6A
60A
B
10A
100A
C
20A
200A
Minimum Load Current . . . . . . . . . . . . . 100mA
Voltage Drop . . . . . . . . . . . . . . . . . . . . . . ≅ 2.5V @ rated current
OFF State Leakage Current . . . . . . . . . . ≅ 5mA @ 230VAC
www.ssac.com • 800-843-8848 • fax: 605-348-5685
Protection
Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . Encapsulated
Dielectric Breakdown . . . . . . . . . . . . . . . . . .≥ 2000 V RMS terminals to mounting surface
Insulation Resistance . . . . . . . . . . . . . . . . ≥ 100 MΩ
Mechanical
Mounting ** . . . . . . . . . . . . . . . . . . . . . . . Surface mt. with one #10 (M5 x 0.8) screw
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . 2 x 2 x 1.51 in. (50.8 x 50.8 x 38.4 mm)
Termination . . . . . . . . . . . . . . . . . . . . . . . 0.25 in. (6.35 mm) male quick connects
Environmental
Operating / Storage Temperature . . . . -40° to 60°C / -40° to 85°C
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . 95% relative, non-condensing
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≅ 3.9 oz (111 g)
**Must be bolted to a metal surface using the included heat sink compound. The maximum
mounting surface temperature is 90°C. Inrush: Non-repetitive for 16ms.
13
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Timer
NHPU Series
The NHPU Series is a factory programmed module
available in any 1 of 14 standard functions. The
NHPU offers a single adjustable timer or counter
function. Switch adjustment allows accurate
selection of the time delay or number of counts,
the first time and every time. The NHPU includes
a high current solid-state output. It can switch
motors, lamps and heaters directly without the
addition of a contactor. It can switch up to 20A
with up to 100 million operations, typical. Its
microcontroller timing circuit provides excellent
repeat accuracy and stability . Encapsulation
protects against shock, vibration, and humidity.
The NHPU Series is a cost effective approach for
OEM applications that require small size, solid
state reliability, and accurate switch adjustment.
See Appendix B, page 165, Figure 4 for dimensional
drawing .
Connection:
L1
N/L2
Switch Adjustment:
Features:
• High load currents up to 20A, 200A inrush
• Factory programmed
• Choose 1 of 14 standard functions
• Special time ranges & functions available
• Microcontroller circuitry, ±0.1% repeat
accuracy
• Accurate switch adjustment
• 24 to 240VAC
• Delays from 0.1s - 1023h
• Counts to 1023
Approvals:
Auxiliary Products:
• Female quick connect:
P/N: P1015-13 (AWG 10/12)
P/N: P1015-64 (AWG 14/16)
P/N: P1015-14 (AWG 18/22)
• Quick connect to screw adaptor:
P/N: P1015-18
Available Models:
There are no part numbers currently active. Please call
Technical Support with your requirements.
V = Voltage
L = Load
UTL = Untimed Load
S1 = Initiate Switch
Order Table:
NHPU
X
Output Rating
─A - 6A
─B - 10A
─C - 20A
X
Input Voltage
─A - 24 to 240VAC
X
Time Delay/Counts
─1 - 0.1 - 102.3s
─2 - 1 - 1023s
─3 - 0.1 - 102.3m
─4 - 1 - 1023m
─5 - 0.1 - 102.3h
─6 - 1 - 1023h
─7 - 1 - 165 counts (straight) w/ pulsed output
─8 - 1 - 1023 counts (binary) w/ pulsed output
─9 - 1 - 7 counts to start 1 - 63s or m interval time
X
Function
─Specify function
Functions:
M, B, RE, RD, S, SD,
I, TS, US, UB, AM,
PSD, C, CI
For a complete list of functions with descriptions and diagrams,
see Appendix A - Timer Functions, pages 156-164.
Specifications
Time Delay
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Microcontroller circuitry
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.1 - 102.3s, m or h in 0.1s, m or h increments
1 - 1023s, m or h in 1s, m or h increments
1 - 63s or m in 1s or m increments
Repeat Accuracy . . . . . . . . . . . . . . . . . . . . . . .±0.1% or 20ms, whichever is greater
Setting Accuracy . . . . . . . . . . . . . . . . . . . . . . .≤ ±1% or 20ms, whichever is greater
Reset Time . . . . . . . . . . . . . . . . . . . . . . . . . . . .≤ 150ms
Initiate Time . . . . . . . . . . . . . . . . . . . . . . . . . . .≤ 20ms
Time Delay vs Temp. & Voltage . . . . . . . . . .≤ ±2%
Count Range . . . . . . . . . . . . . . . . . . . . . . . . . . .1 - 1023 in 3 ranges
Count Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . .≤ 25 counts per second
Input
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 to 240VAC
Tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .≤ ±15%
AC Line Frequency . . . . . . . . . . . . . . . . . . . . .50/60Hz
Output
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Solid state
Rating
Output
Steady State
Inrush**
A
6A
60A
B
10A
100A
C
20A
200A
14
Minimum Load Current . . . . . . . . . . . . . . . . .100mA
Voltage Drop . . . . . . . . . . . . . . . . . . . . . . . . . .≅ 2.5V @ 1A
OFF State Leakage Current . . . . . . . . . . . . . .≅ 5mA @ 230VAC
Counter Output
Time Delay/CountsVariable 7 & 8) . . . . .Pulse width: 300ms ±20%
Protection
Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Encapsulated
Dielectric Breakdown . . . . . . . . . . . . . . . . . . . . . ≥ 2000V RMS terminals to mounting surface
Insulation Resistance . . . . . . . . . . . . . . . . . . . .≥ 100 MΩ
Mechanical
Mounting ** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Surface mt. with one #10 (M5 x 0.8) screw
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 x 2 x 1.51 in. (50.8 x 50.8 x 38.4 mm)
Termination . . . . . . . . . . . . . . . . . . . . . . . . . . .0.25 in. (6.35 mm) male quick connects
Environmental
Operating / Storage Temperature . . . . . . . .-40° to 60°C / -40° to 85°C
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95% relative, non-condensing
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .≅ 3.9 oz (111 g)
**Must be bolted to a metal surface using the included heat sink compound. The
maximum mounting surface temperature is 90°C. Inrush: Non-repetitive for 16ms.
www.ssac.com • 800-843-8848 • fax: 605-348-5685
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement