Uponor | Climate Control Zoning System | Uponor Logic for Radiant Floor Heating and Cooling is the

Radiant Heating and Cooling Systems
PkjijmGjbd^ajmM\_d\ioAgjjm
C`\odib\i_>jjgdibdnoc`
pgodh\o`di^jhajmo^jiomjg)
¥ Comfort
¥ Efficiency
¥ Advanced control systems
¥ Industry pioneer
¥ Proven
¥ Peace of mind
www.uponor-usa.com
(800) 321-4739
Radiant Heating and Cooling Systems
5
Radiant Heating and Cooling Systems
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
New and Innovative Solutions for Complete Radiant Systems
Uponor Multifunction Climate Coùntrolª System
Simple, intelligent and very intuitive, the Multifunction Climate Coùntrol
was designed with Uponor Logic to do everything better. It replaces
all six of our previous pro Series models, and is made to run multiple
proPANEL¨ pumping and mixing units with incredible ease.
functionality without
¥ Increases
adding cost
the need for
¥ Eliminates
multiple controls
¥ Fewer replacement parts
programmable with
¥ Fully
multiple built-in functions
and easy Cat5
¥ Simple
connections and wires
Now multiple functionalities, like boiler staging, domestic hot water
control, mixing, snow melt and zone pumping are controlled from one
interface. ItÕs one box, with one wiring schematic, one setup and one
easy, plug-and-play way to install.
plug-and-play
¥ Simple
connections, eliminating wiring
confusion
¥ Low-voltage platform (24V)
controller can control
¥ One
multiple proPANEL units,
decreasing product and
installation costs
¥ Easy to learn and operate
five-button interface
¥ Intuitive
for easy setup and viewing
Uponor proPANEL Pumping and Mixing Panels
Designed specifically to work with the Multifunction Climate Coùntrol,
the new proPANEL products are an innovative pumping and mixing
units that only require four models to cover countless applications.
options for less money
¥ More
than previous models
hardware
¥ Updated
and circulators
for use with
¥ Modular,
other proPANEL models for
additional heating needs
one-person
¥ Quick
installation
functionality
¥ Increases
without increasing cost
¥ Small, compact design
6
Radiant Heating and Cooling Systems
Prewired and fully assembled, this modular design allows multiple
proPANEL units to be connected to one Multifunction Climate Coùntrol
to provide flexible options for unique jobs.
¥ Eliminates multiple controls
wiring configuration;
¥ Easy
no confusion
capability and
¥ Purge
pump isolation included
connections means
¥ Less
less risk of leaks
installation time and
¥ Decreased
setup costs
and simple connection
¥ Quick
to Multifunction Climate
Cùontrol hydronic controller
www.uponor-usa.com
(800) 321-4739
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
Heat-transfer tubing for closed-loop hydronic heating and cooling applications with an EVOH oxygen
diffusion barrier that meets the German DIN Standard 4726. Wirsbo hePEXª plus tubing is compatible
with UponorÕs ProPEX¨ and QS-style fittings and is manufactured to ASTM F876 and F877. Tubing is rated
and listed by the Hydrostatic Stress Board of PPI at: 200¡F at 80 psi, 180ûF at 100 psi and 73.4¡F at 160
psi.
Part No.
Part Description
Coils/Pallet
Wirsbo hePEXª Tubing,
Coils
List Price/Ea.
A1180313
6QE" Wirsbo hePEX, 250-ft. coil
40
$277.85
A1220313
6QE" Wirsbo hePEX, 1,000-ft. coil
12
$1,111.20
A1210375
6" Wirsbo hePEX, 400-ft. coil
18
$445.35
A1220375
6" Wirsbo hePEX, 1,000-ft. coil
12
$1,113.40
A1250500
56O" Wirsbo hePEX, 300-ft. coil
18
$353.90
A1220500
56O" Wirsbo hePEX, 1,000-ft. coil
8
$1,179.55
A1260500
56O" Wirsbo hePEX, 500-ft. coil
12
$560.70
A1250625
6" Wirsbo hePEX, 300-ft. coil
12
$420.05
A1220625
6" Wirsbo hePEX, 1,000-ft. coil
5
$1,400.05
A1250750
6M" Wirsbo hePEX, 300-ft. coil
12
$499.35
A1240750
6M" Wirsbo hePEX, 500-ft. coil
8
$832.30
A1251000
1" Wirsbo hePEX, 300-ft. coil
5
$833.45
A1241000
1" Wirsbo hePEX, 500-ft. coil
6
$1,389.00
A1141250
156M" Wirsbo hePEX, 100-ft. coil
12
$453.70
A1251250
156M" Wirsbo hePEX, 300-ft. coil
8
$1,361.05
A1141500
156O" Wirsbo hePEX, 100-ft. coil
5
$620.10
A1251500
156O" Wirsbo hePEX, 300-ft. coil
5
$1,860.30
A1142000
2" Wirsbo hePEX, 100-ft. coil
12
$916.90
A1252000
2" Wirsbo hePEX, 300-ft. coil
6
$2,750.70
Radiant Heating and Cooling Systems
Barrier Tubing
Note: Non-standard lengths of Wirsbo hePEX tubing are also available. Call Uponor Customer Service for
availability and pricing.
Part No.
Part Description
List Price/Ea.
A1921250
156M" Wirsbo hePEX, 20-ft. straight length, 100 ft.
$453.70
A1921500
156O" Wirsbo hePEX, 20-ft. straight length, 100 ft.
$620.10
A1922000
2" Wirsbo hePEX, 20-ft. straight length, 100 ft.
$916.90
www.uponor-usa.com
(800) 321-4739
Wirsbo hePEX Tubing,
Straight Length
Radiant Heating and Cooling Systems
7
Radiant Heating and Cooling Systems
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
Multi-layer Composite
(MLC) Tubing Coil
Multi-layered (MLC) composite tubing consisting of an interior aluminum tubing lined with inner and outer
layers of PEX. MLC tubing offers 100% oxygen diffusion. The stay-in-place rigid feature of the tubing
works great for hydronic baseboard, radiators, unit heaters, air handlers or manifold connections.
Uponor MLC tubing is manufactured to the following standard.
ASTM F1281 ÒStandard Specification for Cross-linked Polyethylene/Aluminum/Cross-linked
Polyethylene (PEX-AL-PEX) Pressure PipeÓ
Uponor tubing is rated and listed by the Hydrostatic Stress Board of PPI at:
200¡F at 100 psi
180¡F at 125 psi
140¡F at 160 psi
73¡F at 200 psi
Uponor MLC tubing has the following listing: ICC.
Uponor MLC tubing is approved in the following code: IMC.
¥
¥
¥
¥
¥
Note: MLC tubing is used in hydronic heating installations only.
Part No.
Part Description
D1250500
56O" MLC Tubing, 300-ft. coil
Coils/Pallet
List Price/Ea.
20
$322.00
D1220500
56O" MLC Tubing, 1,000-ft. coil
8
$1,073.10
D1250625
6" MLC Tubing, 300-ft. coil
13
$437.60
D1220625
6" MLC Tubing, 1,000-ft. coil
7
$1,458.60
D1140750
6M" MLC Tubing, 100-ft. coil
14
$206.65
D1250750
6M" MLC Tubing, 300-ft. coil
8
$619.90
D1240750
6M" MLC Tubing, 500-ft. coil
6
$1,033.20
D1141000
1" MLC Tubing, 100-ft. coil
10
$298.40
D1251000
1" MLC Tubing, 300-ft. coil
6
$854.50
Coil/Pallet
List Price/Ea.
Non-barrier Tubing
Uponor AquaPEX¨ Tubing
Coil Ñ White
Part No.
Part Description
F1040250
" Uponor AquaPEX White, 100-ft. coil
50
$56.05
F1090375
6" Uponor AquaPEX White, 400-ft. coil
18
$229.05
F1120375
6" Uponor AquaPEX White, 1,000-ft. coil
12
$572.65
F1040500
56O" Uponor AquaPEX White, 100-ft. coil
22
$65.45
F1060500
56O" Uponor AquaPEX White, 300-ft. coil
18
$196.30
F1120500
56O" Uponor AquaPEX White, 1,000-ft. coil
8
$654.45
F1060625
6" Uponor AquaPEX White, 300-ft. coil
12
$297.15
F1120625
6" Uponor AquaPEX White, 1,000-ft. coil
5
$990.55
F1040750
6M" Uponor AquaPEX White, 100-ft. coil
11
$112.20
F1060750
6M" Uponor AquaPEX White, 300-ft. coil
12
$336.55
F1100750
6M" Uponor AquaPEX White, 500-ft. coil
8
$560.95
F1041000
1" Uponor AquaPEX White, 100-ft. coil
12
$196.30
F1061000
1" Uponor AquaPEX White, 300-ft. coil
5
$589.00
F1101000
1" Uponor AquaPEX White, 500-ft. coil
6
$981.65
F1061250
156M" Uponor AquaPEX White, 100-ft. coil
7
$375.15
F1021250
156M" Uponor AquaPEX White, 300-ft. coil
2
$1,125.40
F1061500
156O" Uponor AquaPEX White, 100-ft. coil
7
$441.75
F1021500
156O" Uponor AquaPEX White, 300-ft. coil
2
$1,325.25
F1062000
2" Uponor AquaPEX White, 100-ft. coil
1
$874.15
F1052000
2" Uponor AquaPEX White, 200-ft. coil
1
$1,748.30
F1022000
2" Uponor AquaPEX White, 300-ft. coil
1
$2,622.45
Please see page 72 for the suitability of Uponor AquaPEX¨ in hydronic heating applications.
8
Radiant Heating and Cooling Systems
www.uponor-usa.com
(800) 321-4739
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
High-density Polyethylene
(HDPE) Tubing
Service pressure and temperature ratings for HDPE used to convey water or water/glycol mixtures are
as follows:
140¡F at 80 psi
100¡F at 125 psi
120¡F at 100 psi
73.4¡F at 160 psi
¥
¥
¥
¥
Note: This tubing is provided only in 20-foot lengths.
Part No.
Part Description
List Price/Ea.
B1812000
2" x 20' HDPE Tubing (straight length)
$111.90
B1813000
3" x 20' HDPE Tubing (straight length)
$215.90
B1814000
4" x 20' HDPE Tubing (straight length)
$328.90
Radiant Heating and Cooling Systems
High-density polyethylene (HDPE) SDR 11 tubing is used as supply and return mains for large hydronic
heating applications where the system contains no ferrous corrodible components or where ferrous
components are isolated from the tubing. HDPE tubing is manufactured from 3408 PE material. Tubing and
fittings are connected through fusion welding.
TruFLOWª Jr. Modular Manifolds
TruFLOWª Jr. Modular Manifold with Balancing Valves is used in conjunction with either the TruFLOW Jr.
Modular Manifold with Isolation Valves or the TruFLOW Jr. Modular Valveless Manifold to complete the
manifold set. The TruFLOW Jr. Modular Manifold with Balancing Valves allows manual flow balancing of
the individual loops on the manifold. Manifolds are available in 2- to 4-loop configurations depending on
model. The manifold body ends have threads as shown in the picture.
TruFLOWª Jr. Manifold with
Balancing Valves
Maximum recommended flow to the manifold is 14 gpm.
Part No.
Item Description
Pkg. Qty.
List Price/Ea.
A2663212
TruFLOW Jr. Balancing Valves, 2-loop
Dim (Body-Outlets-Body) Each Qty.
R32-R20-R32
1
-
$97.05
A2663213
TruFLOW Jr. Balancing Valves, 3-loop
R32-R20-R32
1
-
$120.75
A2663214
TruFLOW Jr. Balancing Valves, 4-loop
R32-R20-R32
1
-
$144.40
TruFLOW Jr. Modular Manifold with Isolation Valves is used in conjunction with either the TruFLOW Jr.
Modular Manifold with Balancing Valves or the TruFLOW Jr. Modular Valveless Manifold to complete the
manifold set. The TruFLOW Jr. Modular Manifold with Isolation Valves allows quick isolation of the loop
by closing the valve on the manifold. Manifolds are available in 2- to 4-loop configurations depending on
model. The manifold body ends have threads as shown in the picture to the left.
TruFLOW Jr. Manifold with
Isolation Valves
Maximum recommended flow to the manifold is 14 gpm.
Part No.
Item Description
Dim (Body-Outlets-Body) Each Qty.
A2663222
TruFLOW Jr. Isolation Valves, 2-loop
R32-R20-R32
A2663223
TruFLOW Jr. Isolation Valves, 3-loop
R32-R20-R32
A2663224
TruFLOW Jr. Isolation Valves, 4-loop
R32-R20-R32
Pkg. Qty.
List Price/Ea.
1
-
$116.25
1
-
$153.00
1
-
$189.75
TruFLOW Jr. Modular Valveless Manifold is used with either the TruFLOW Jr. Modular Manifold with
Isolation Valves or the TruFLOW Jr. Modular Manifold with Balancing Valves to complete the manifold
set. The TruFLOW Jr. Modular Valveless Manifold does not feature flow balancing or isolation capability.
Manifolds are available in 2- to 4-loop configurations depending on model.
TruFLOW Jr.
Valveless Manifold
Maximum recommended flow to the manifold is 14 gpm.
Part No.
Item Description
A2663202
TruFLOW Jr. Valveless, 2-loop
R32-R20-R32
1
-
$64.05
A2663203
TruFLOW Jr. Valveless, 3-loop
R32-R20-R32
1
-
$79.90
A2663204
TruFLOW Jr. Valveless, 4-loop
R32-R20-R32
1
-
$94.70
www.uponor-usa.com
(800) 321-4739
Dim (Body-Outlets-Body) Each Qty.
Pkg. Qty.
List Price/Ea.
Radiant Heating and Cooling Systems
9
Radiant Heating and Cooling Systems
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
TruFLOW ManifoldWAssemblies
TruFLOW Jr. Assembly
with Balancing Valves
and Valveless
The TruFLOW Jr. Assembly with Balancing Valves and Valveless manifold comes fully assembled and ready
for installation. The manifold body ends have R32 unions and the loop outlets have QS20 male threads.
Maximum recommended flow to the manifold based on manifold body diameter is 14 gpm.
Part No.
Item Description
Pkg. Qty.
List Price/Ea.
A2660200
TruFLOW Jr. Assembly, Balancing
Valves and Valveless, 2-loop
Dim (Body-Outlets-Body) Each Qty.
R32-R20-R32
1
-
$242.40
A2660300
TruFLOW Jr. Assembly, Balancing
Valves and Valveless, 3-loop
R32-R20-R32
1
-
$295.00
A2660400
TruFLOW Jr. Assembly, Balancing
Valves and Valveless, 4-loop
R32-R20-R32
1
-
$349.25
A2660500
TruFLOW Jr. Assembly, Balancing
Valves and Valveless, 5-loop
R32-R20-R32
1
-
$450.60
A2660600
TruFLOW Jr. Assembly, Balancing
R32-R20-R32
1
-
$503.15
Valves and Valveless, 6-loop
TruFLOW Jr. and Classic
Assemblies with Balancing
and Isolation Valves
A2660700
TruFLOW Jr. Assembly, Balancing
Valves and Valveless, 7-loop
R32-R20-R32
1
-
$557.45
A2660800
TruFLOW Jr. Assembly, Balancing
Valves and Valveless, 8-loop
R32-R20-R32
1
-
$611.70
The TruFLOW Assembly with Balancing and Isolation Valves comes fully assembled and ready for
installation. The manifold assembly is shipped with the appropriate number of TruFLOW Manifold Actuator
Adapters (A2630028). The manifold body ends have threads as shown below.
Maximum recommended flow to the manifold is 14 gpm for Jr. and 21 gpm for Classic.
10
Radiant Heating and Cooling Systems
Part No.
Item Description
Dim (Body-Outlets) Each Qty.
Pkg. Qty.
List Price/Ea.
A2660201
TruFLOW Jr. Assembly, B&I, 2-loop
R32-R20
A2660301
TruFLOW Jr. Assembly, B&I, 3-loop
R32-R20
1
-
$303.00
1
-
$368.70
A2660401
TruFLOW Jr. Assembly, B&I, 4-loop
R32-R20
1
-
$436.55
A2660501
A2660601
TruFLOW Jr. Assembly, B&I, 5-loop
R32-R20
1
-
$563.20
TruFLOW Jr. Assembly, B&I, 6-loop
R32-R20
1
-
$628.95
A2660701
TruFLOW Jr. Assembly, B&I, 7-loop
R32-R20
1
-
$696.80
A2660801
TruFLOW Jr. Assembly, B&I, 8-loop
R32-R20
1
-
$764.60
A2610200
TruFLOW Classic Assembly, B&I, 2-loop
R32-R20
1
-
$339.95
A2610300
TruFLOW Classic Assembly, B&I, 3-loop
R32-R20
1
-
$422.60
A2610400
TruFLOW Classic Assembly, B&I, 4-loop
R32-R20
1
-
$505.25
A2610500
TruFLOW Classic Assembly, B&I, 5-loop
R32-R20
1
-
$610.15
A2610600
TruFLOW Classic Assembly, B&I, 6-loop
R32-R20
1
-
$692.95
A2610700
TruFLOW Classic Assembly, B&I, 7-loop
R32-R20
1
-
$775.75
A2610800
TruFLOW Classic Assembly, B&I, 8-loop
R32-R20
1
-
$890.15
A2611000
TruFLOW Classic Assembly, B&I, 10-loop
R32-R20
1
-
$1,068.65
A2611200
TruFLOW Classic Assembly, B&I, 12-loop
R32-R20
1
-
$1,256.80
www.uponor-usa.com
(800) 321-4739
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
TruFLOW Jr. and TruFLOW Classic Manifold Mounting Bracket is used to mount the TruFLOW Jr. and
TruFLOW Classic Manifolds. Brackets are made of durable metal and are offset front-to-back and
side-to-side for ease of installation. Two brackets are required for each manifold location.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A2640006
A2620006
TruFLOW Jr. Manifold Mounting Bracket, single bracket
-
10
$22.60
TruFLOW Classic Manifold Bracket, single bracket replacement part
-
10
$32.15
TruFLOW Support Bracket comes in a set of two and facilitates mounting of TruFLOW Jr. and TruFLOW
Classic manifolds between wall studs. The brackets mount in four different configurations Ð with exposed
studs, in a stud cavity, on a flat surface and vertically.
Part No.
Part Description
A2072500
TruFLOW Support Bracket, set of 2
Each Qty.
Pkg. Qty.
List Price/Ea.
1
-
$56.45
End Cap with Vent caps the end of the TruFLOW Jr. Modular Manifolds. It comes complete with swivel drain
valve and manual air vent. Required gasket (A2403232) is included.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A2803250
End Cap with Vent, R32
1
-
$72.35
A2403232
Manifold Gasket, spare part
-
10
$1.60
Basic End Cap caps the end of the TruFLOW Jr. Modular Manifolds. Required gaskets and o-rings are included.
Part No.
Part Description
A2080032
Basic End Cap, R32
Each Qty.
Pkg. Qty.
List Price/Ea.
-
10
$17.05
TruFLOW Manifold Supply and Return Ball Valves are full-flow 156M" ball valves with R32 male by R32
union nut that fits directly on the TruFLOW Jr. and Classic Manifolds. The Ball Valves come standard with a
thermometer.
Part No.
Part Description
A2631250
TruFLOW Manifold Supply and Return Ball Valves, one set
A2610120
Thermometer with Well, replacement part
Each Qty.
Pkg. Qty.
List Price/Ea.
1
-
$217.20
-
10
$22.75
TruFLOW Manifold Coupling Nipple features male BSP thread on both ends and is used to make the
connection between manifold parts. Primary seal for the connection is made with the attached o-ring on
the nipple. Thread sealant on the nipple ensures tight bonding between the nipple and the manifold. Use
Uponor Silicone Oil (A2620007), sold separately, on the male threads to ease installation.
Part No.
Part Description
A2621010
TruFLOW Manifold Coupling Nipple, 156M" BSP x 156M" BSP
www.uponor-usa.com
(800) 321-4739
Each Qty.
Pkg. Qty.
List Price/Ea.
-
10
$18.95
TruFLOW Manifold
Mounting Bracket
TruFLOW Support Bracket
Radiant Heating and Cooling Systems
TruFLOW Manifold Accessories
End Cap with Vent
Basic End Cap
TruFLOW Jr. and Classic
Manifold Supply and Return
Ball Valves
TruFLOW Manifold
Coupling Nipple
Radiant Heating and Cooling Systems
11
Radiant Heating and Cooling Systems
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
Features an R32 union by 156M" BSP male connection. The union elbow is designed to make tight 90-degree
turns from the TruFLOW Classic Manifold supply and return connections. Use Uponor Silicone Oil
(A2620007), sold separately, on the male threads to ease installation.
TruFLOW Manifold
Elbow Union
TruFLOW Manifold
Actuator Adapter
Part Description
A2620090
TruFLOW Classic Manifold Elbow Union, R32 Union x 156M" BSP
Each Qty.
Pkg. Qty.
List Price/Ea.
-
10
$23.15
Features an R32 union by 156M" BSP male connection. This union is designed for easy alignment of the
supply and return piping at the manifold. Use Uponor Silicone Oil (A2620007), sold separately, on the male
threads to ease installation.
TruFLOW Manifold
Offset Union
TruFLOW Manifold
Extension Kit
Part No.
Part No.
Part Description
A2620045
TruFLOW Classic Manifold Offset union, R32 Union x 156M" BSP
Each Qty.
Pkg. Qty.
List Price/Ea.
-
10
$24.35
This TruFLOW Classic Manifold Extension Kit is designed for easy in-line extension of up to two additional
loops for the TruFLOW Classic Manifold Assembly. The kit contains two 156M" BSP nipples, one supply
manifold, one return manifold and two loop end caps. Use Uponor Silicone Oil (A2620007), sold separately,
on the male threads to ease installation. A bottle of Uponor Silicone Oil is provided in the kit.
Part No.
Part Description
A2610100
TruFLOW Classic Manifold Extension Kit, 2 loops
Each Qty.
Pkg. Qty.
List Price/Ea.
1
-
$272.80
The TruFLOW Manifold Actuator Adapter is a replacement part. This M28 brass adapter converts the
manifold actuator threads to fit the standard Uponor Thermal Actuator (A3010522) and Motorized
Actuator (A3020522).
Note: Use only with the TruFLOW Jr. and Classic Manifolds.
TruFLOW Manifold Balancing
Hex Key
Part No.
Part Description
A2630028
TruFLOW Manifold Actuator Adapter, replacement part
Each Qty.
Pkg. Qty.
-
10
List Price/Ea.
$2.05
The TruFLOW Manifold Balancing Hex Key is used on the supply manifold to adjust the flow rate across the
loop for balancing. Each manifold is shipped with a hex key for balancing.
TruFLOW Visual Flow Meter
Part No.
Part Description
A2620002
TruFLOW Manifold Balancing Hex Key, replacement part
Each Qty.
Pkg. Qty.
-
10
List Price/Ea.
$3.95
Use the TruFLOW Visual Flow Meter on TruFLOW Jr. and TruFLOW Classic manifolds to accurately measure
the flow of hydronic radiant loops.
Note: For proper operation, install Flow Meters on the return manifold.
12
Radiant Heating and Cooling Systems
Part No.
Part Description
A2640015
TruFLOW Visual Flow Meter, 0.15 to 0.8 gpm
Each Qty.
Pkg. Qty.
List Price/Ea.
-
10
$35.45
A2640027
TruFLOW Visual Flow Meter, 0.25 to 2.0 gpm
-
10
$35.45
A2620009
Replacement O-ring for TruFLOW Flow/Temperature Meter
-
10
$0.40
www.uponor-usa.com
(800) 321-4739
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
Part No.
Part Description
Each Qty.
Pkg. Qty.
TruFLOW Loop Thermometer
List Price/Ea.
A2610020
TruFLOW Manifold Loop Thermometer
-
10
$39.15
A2610120
Thermometer with Well, replacement part
-
10
$22.75
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A2400032
Basic End Cap Gasket, spare part, R32
-
10
$2.25
A2650004
Replacement O-ring for 156O" BSP Connections
-
10
$0.30
A2620005
Replacement Gasket for R32 Union Connections
-
10
$1.10
A2620007
Silicone Oil, 1.76 oz. bottle, optional part
-
10
$8.65
A2620008
Replacement O-ring for 156M" BSP Connections
-
10
$0.45
A2620009
Replacement O-ring for TruFLOW/Temperature Meter
-
10
$0.40
Replacement and Spare
Parts for Manifolds
Radiant Heating and Cooling Systems
TruFLOW Loop Thermometer comes with an QS20 female union on one end and an QS20 male on the
other. Thermometer Well and removable thermometer are included.
Engineered Plastic (EP) Heating Manifolds
The Engineered Plastic (EP) Heating Manifold Assemblies feature isolation valves and balancing valves with
flow meters, and come fully assembled, ready for installation. The manifolds are available in 2- through
8-loop configurations. The body ends feature R32 unions and the loop outlets have R20 male threads. The
manifold mounts on a bracket (A2670006) that comes with the assembly.
EP Heating Manifold
Assembly with Flow Meter
Pressure and Temperature Rating
¥ 687barpsiatat60¡C
140¡F
¥ 458barpsiatat80¡C
176¡F
¥ 725 barpsiatat70¡C
158¡F
¥ 443 barpsiatat90¡C
194¡F
Part No.
Part Description
Dimension
(Body-OutletsBody)
Each
Qty.
Pkg.
Qty.
A2670201
EP Heating Manifold Assembly with Flow Meter, 2-loop
R32-R20-R32
1
-
$298.50
A2670301
EP Heating Manifold Assembly with Flow Meter, 3-loop
R32-R20-R32
1
-
$346.65
A2670401
EP Heating Manifold Assembly with Flow Meter, 4-loop
R32-R20-R32
1
-
$408.55
A2670501
EP Heating Manifold Assembly with Flow Meter, 5-loop
R32-R20-R32
1
-
$470.20
A2670601
EP Heating Manifold Assembly with Flow Meter, 6-loop
R32-R20-R32
1
-
$532.05
A2670701
EP Heating Manifold Assembly with Flow Meter, 7-loop
R32-R20-R32
1
-
$578.35
A2670801
EP Heating Manifold Assembly with Flow Meter, 8-loop
R32-R20-R32
1
-
$655.55
List Price/
Ea.
EP Heating Manifold Accessories
The EP Heating Manifold Single Section with Isolation Valve is a single loop add-on used on the return side
for EP Heating Manifold Assemblies (A2670201 through A2670801).
Part No.
Part Description
A2670001
EP Heating Manifold Single Section with
Isolation Valve
www.uponor-usa.com
(800) 321-4739
Dimension
(Body-Outlets-Body)
R20
Each Qty.
Pkg. Qty.
List Price/Ea.
1
-
$32.65
EP Heating Manifold Single
Section with Isolation Valve
Radiant Heating and Cooling Systems
13
Radiant Heating and Cooling Systems
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
EP Heating Manifold Single
Section with Balancing Valve
and Flow Meter
EP Heating Manifold
Connection Piece
EP Heating
Manifold Elbow
End Cap with
Vent and Drain
EP Heating Manifold
Mounting Bracket
EP Heating Manifold
Actuator Adapter
EP Heating Manifold
Isolation Valve Body
14
The EP Heating Manifold Single Section with Balancing Valve and Flow Meter is a single loop add-on used
on the supply side for EP Heating Manifold Assemblies (A2670201 through A2670801).
Part No.
Part Description
A2670003
EP Heating Manifold Single Section with
Balancing Valve and Flow Meter
Dimension
(Body-Outlets-Body)
Each Qty.
Pkg. Qty.
List Price/Ea.
1
-
$45.55
R32-R20-R32
The EP Heating Manifold Connection Piece connects the manifold to the supply and return piping.
Connection fitting size is an R32 union.
Part No.
Part Description
A2670032
EP Heating Manifold Connection Piece
with R32 Union and Thermometer
Dimension
(Body-Outlets-Body)
Each Qty.
Pkg. Qty.
List Price/Ea.
1
-
$111.40
R32
The EP Heating Manifold Elbow enables connections to supply and return piping from above or below. The
two elbows feature different lengths to accommodate tube spacing for the supply and return lines.
Part No.
Part Description
A2670090
EP Heating Manifold Elbow, set of 2
Each Qty.
Pkg. Qty.
List Price/Ea.
1
-
$33.95
Each Qty.
Pkg. Qty.
List Price/Ea.
1
-
$40.70
Each Qty.
Pkg. Qty.
List Price/Ea.
1
-
$19.80
Each Qty.
Pkg. Qty.
List Price/Ea.
1
-
The End Cap with Vent and Drain allows filling and purging at the manifold.
Part No.
Part Description
A2671250
EP Heating Manifold End Cap with Vent and Drain
The EP Heating Manifold Mounting Bracket mount the manifold assembly to a wall.
Part No.
Part Description
A2670006
EP Heating Manifold Bracket, set of 2
The Actuator Adaptor fits four-wire actuator (A3010522) onto the EP Heating Manifold.
Part No.
Part Description
A2671300
EP Heating Manifold Actuator Adapter
$7.70
The EP Heating Manifold Isolation Valve Body replaces the isolation valve on the return manifold.
Radiant Heating and Cooling Systems
Part No.
Part Description
A2670004
EP Heating Manifold Isolation Valve Body,
replacement part
Each Qty.
Pkg. Qty.
List Price/Ea.
1
-
$18.15
www.uponor-usa.com
(800) 321-4739
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
Part No.
Part Description
A2670005
EP Heating Manifold Flow Meter Valve Body, replacement part
Each Qty.
Pkg. Qty.
List Price/Ea.
1
-
$21.80
The EP Heating Manifold Thermometer displays the supply and return temperature on the manifold. It
snaps into the Connection Piece (A2670032) on the manifold.
Part No.
Part Description
A2670132
EP Heating Manifold Thermometer, set of 2
Each Qty.
Pkg. Qty.
List Price/Ea.
1
-
$28.55
Use the Valve Replacement Tool when replacing the Isolation Valve Body (A5670004) and Flowmeter Valve
Body (A2670005).
Part No.
Part Description
A2670007
EP Heating Manifold Valve Replacement Tool
Each Qty.
Pkg. Qty.
List Price/Ea.
1
-
$14.20
The Replacement O-ring allows a proper seal between body parts on the manifold.
Part No.
Part Description
A2670008
EP Heating Manifold Replacement O-ring
28.5 x 3mm EPDM
Each Qty.
Pkg. Qty.
-
10
List Price/Ea.
Part Description
A3030522
EP Heating Manifold Two-wire Actuator
Each Qty.
Pkg. Qty.
1
-
EP Heating Manifold
Thermometer
EP Heating Manifold Valve
Replacement Tool
EP Heating Manifold
Replacement O-ring
$1.10
The EP Heating Manifold Two-wire Actuator mounts onto the EP Heating Manifold and connects to the
Climate Coùntrol Zoning System Base Unit (A3601012).
Part No.
EP Heating Manifold Flow
Meter Valve Body
Radiant Heating and Cooling Systems
The EP Heating Manifold Flow Meter Valve Body replaces the flow meter valve on the supply manifold.
EP Heating Manifold
Two-wire Actuator
List Price/Ea.
$56.10
Manifold Adapters and Fittings
The Brass Manifold Adapter allows either a straight copper pipe or a copper fitting adapter to sweat to
the brass manifold adapter. The R32 threaded side couples with the R32 union connection on the brass
manifolds.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A4143210
Brass Manifold Adapter, R32 x 6M" Adapter or 1" Fitting Adapter
-
10
$19.95
A4133210
Brass Manifold Adapter, R32 x 1" Adapter or 156M" Fitting Adapter
-
10
$19.95
Threaded Brass Manifold Adapter transitions the R32 manifold union nut to PEX or MLC tubing with
QS-style fittings.
Part No.
Part Description
Each Qty.
Pkg. Qty.
A4143220
Threaded Brass Manifold Straight Adapter, R32 x R20
-
10
$24.65
Threaded Brass Manifold Straight Adapter, R32 x R25
-
10
$24.65
A2133275
Threaded Brass Manifold Bushing, R32 Male x 6M" Female NPT
-
10
$19.90
A2123210
Threaded Brass Manifold Bushing, R32 Male x 1" Female NPT
-
10
$16.70
(800) 321-4739
Threaded Brass Manifold
Adapter and Bushing
List Price/Ea.
A4143225
www.uponor-usa.com
Brass Manifold Combination
Adapter/Fitting Adapter
Radiant Heating and Cooling Systems
15
Radiant Heating and Cooling Systems
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
ProPEX Manifold Adapter for brass manifolds transitions from the R32 manifold union nut to 6M" and 1"
Uponor PEX tubing.
ProPEX Manifold Adapter
Part No.
Each Qty.
Pkg. Qty.
List Price/Ea.
Q4143275
ProPEX Manifold Straight Adapter, R32 x 6M" ProPEX
-
10
$27.20
Q4143210
ProPEX Manifold Straight Adapter, R32 x 1" ProPEX
-
10
$25.80
Q4153275
ProPEX Manifold Elbow Adapter, R32 x 6M" ProPEX
-
10
$27.20
Q4153210
ProPEX Manifold Elbow Adapter, R32 x 1" ProPEX
-
10
$25.95
Brass Manifold Pressure Test Kit contains R32 x 6M" manifold bushing, R32 solid brass plug, 6M" brass nipple
and pressure gauge assembly (100 psi). Schraeder valve is included.
Brass Manifold Pressure
Test Kit
Part No.
Part Description
E6122000
Brass Manifold Pressure Test Kit
Each Qty.
Pkg. Qty.
List Price/Ea.
1
-
$65.60
Brass Manifold Loop End Cap closes off unused QS20 loop connections. Install the supplied Brass Manifold
Loop End Cap Gasket (A2400020) with the Loop End Cap to ensure a proper seal.
Brass Manifold Loop
End Cap
Part No.
QS-style Compression
Fitting Assembly
Part Description
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A2080020
Brass Manifold Loop End Cap
-
10
$7.40
A2400020
Brass Manifold Loop End Cap Gasket, spare part
-
10
$2.85
The QS-style Compression Fitting Assembly with o-ring connects 6QE", 6", 56O", and 6" Uponor PEX tubing
to Uponor brass manifolds and R20 fittings. Sold as a three-piece component. The QS-style compression
rings and o-rings are also sold separately.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A4020313
6QE" QS-style Compression Fitting Assembly, R20 thread
-
10
$11.80
A4020375
6" QS-style Compression Fitting Assembly, R20 thread
-
10
$11.80
A4020500
56O" QS-style Compression Fitting Assembly, R20 thread
-
10
$9.00
A4020625
6" QS-style Compression Fitting Assembly, R20 thread
-
10
$12.55
A4021116
Replacement O-ring for insert (R20)
-
10
$0.30
The QS-style Compression Fitting Assembly with o-ring connects 6" and 6M" Uponor PEX tubing to 2"
Copper Valved Manifolds and other R25 male-threaded fittings.
16
Radiant Heating and Cooling Systems
Part No.
Part Description
A4030625
6" QS-style Compression Fitting Assembly, R25 thread
Each Qty.
Pkg. Qty.
List Price/Ea.
-
10
$16.40
A4020750
6M" QS-style Compression Fitting Assembly, R25 thread
-
10
$15.90
A4021000
Replacement O-ring for insert (R25)
-
10
$0.40
www.uponor-usa.com
(800) 321-4739
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
QS-style Compression Ring
Note: Do not substitute similar compression rings.
Part No.
Part Description
A4160313
6QE" QS-style Compression Ring, spare part
Each Qty.
Pkg. Qty.
-
10
List Price/Ea.
$3.25
A4160375
6" QS-style Compression Ring, spare part
-
10
$3.05
A4160500
56O" QS-style Compression Ring, spare part
-
10
$2.85
A4160625
6" QS-style Compression Ring, spare part
-
10
$3.05
A4160750
6M" QS-style Compression Ring, spare part
-
10
$3.85
ProPEX Fitting Assembly with ProPEX insert connects 6" through 6M" Uponor PEX tubing to the brass
manifolds. Sold as a two-piece assembly, it includes a ProPEX insert and R20 swivel nut.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
Q4020375
6" ProPEX Fitting Assembly, R20 thread
-
10
$10.20
Q4020500
56O" ProPEX Fitting Assembly, R20 thread
-
10
$7.45
Q4020625
6" ProPEX Fitting Assembly, R20 thread
-
10
$9.15
Q4020750
6M" ProPEX Fitting Assembly, R20 thread
-
10
$10.35
A4021116
Replacement O-ring for insert (R20)
-
10
$0.30
ProPEX Fitting Assembly
Radiant Heating and Cooling Systems
The QS-style Compression Ring (replacement part) is designed and tested for use with Uponor PEX tubing.
ProPEX Fitting Assembly with ProPEX insert connects 6" through 6M" Uponor PEX tubing to 2" Copper
Valved Manifolds and other R25 male-threaded fittings. Sold as a two-piece assembly, it includes a ProPEX
insert and R25 swivel nut.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
Q4030625
6" ProPEX Fitting Assembly, R25 thread
-
10
$16.05
Q4030750
6M" ProPEX Fitting Assembly, R25 thread
-
10
$15.65
MLC Tubing Compression Fitting Assembly, made of heat-treated brass, connects 56O" and 6" MLC tubing
to brass manifolds.
Part No.
Part Description
Each Qty.
Pkg. Qty.
MLC Tubing Compression
Fitting Assembly
List Price/Ea.
D4120500
56O" MLC Tubing Compression Fitting Assembly, R20 thread
-
20
$10.10
D4120625
6" MLC Tubing Compression Fitting Assembly, R20 thread
-
20
$11.10
The MLC Tubing Compression Fitting Assembly with o-ring connects 6M" Uponor MLC tubing to 2" Copper
Valved Manifolds and other R25 male-threaded fittings.
Part No.
Part Description
D4120750
6M" MLC Tubing Compression Fitting Assembly, R25 thread
www.uponor-usa.com
(800) 321-4739
Each Qty.
Pkg. Qty.
List Price/Ea.
-
20
$16.50
Radiant Heating and Cooling Systems
17
Radiant Heating and Cooling Systems
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
MLC Press Fitting Assembly connects 56O" and 6" MLC tubing to brass manifolds.
MLC Press Fitting Assembly
Note: The Mini-Press Battery Tool or MLC Press Fitting Manual Tool is required.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
D4020500
56O" MLC Press Fitting Assembly, R20 thread
-
10
$13.30
D4020625
6" MLC Press Fitting Assembly, R20 thread
-
10
$15.65
MLC Press Fitting Assembly connects 6" and 6M" MLC tubing to 2" Copper Valved Manifolds and other R25
male-threaded fittings.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
D4030625
6" MLC Press Fitting Assembly, R25 thread
-
10
$17.05
D4030750
6M" MLC Press Fitting Assembly, R25 thread
-
10
$17.25
Manifold Wall Cabinets
The Manifold Wall Cabinet is adjustable to accommodate a brass manifold mounted in either a 2x4 or 2x6
stud wall. This is a recess-style cabinet and comes with a removable door-trim package. Mount an Uponor
Zone Control Module inside the cabinet for ease of wiring and away from exposure or
possible damage.
Note: Wall Cabinets are suitable for all brass manifolds except TruFLOW Sr.
Part No.
Item Description
Each Qty.
List Price/Ea.
A2603524
A2603530
Manifold Wall Cabinet, 35.5" H x 24" W x 3.5" D
1
$378.85
Manifold Wall Cabinet, 35.5" H x 30.5" W x 3.5" D
1
$424.60
A2603539
Manifold Wall Cabinet, 35.5" H x 39" W x 3.5" D
1
$461.70
Copper Manifolds
2" Copper Valved Manifold
with ProPEX Ball Valves
18
Radiant Heating and Cooling Systems
UponorÕs 2" x 4' Copper Valved Manifold with ProPEX Ball Valves is made of type L copper and features 6"
and 6M" nominal branches that are 4 inches on center. The manifold is available in 12-outlet configurations.
The maximum recommended flow to the manifold based on manifold body diameter is 45 gpm.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
Q2811263
2" x 4' Copper Valved Manifold with 6" ProPEX Ball Valves,
12 outlet
1
-
$683.05
Q2811275
2" x 4' Copper Valved Manifold with 6M" ProPEX Ball Valves,
12 outlet
1
-
$723.80
Q2821263
2" x 4' Copper Valved Manifold with 6" ProPEX Ball and
Balancing Valves, 12 outlet
1
-
$1,097.00
Q2821275
2" x 4' Copper Valved Manifold with 6M" ProPEX Ball and
Balancing Valves, 12 outlet
1
-
$1,029.15
F2811220
2" x 4' Copper Valved Manifold with R20 Threaded Ball Valves,
12 outlet
1
-
$815.45
F2811225
2" x 4' Copper Valved Manifold with R25 Threaded Ball Valves,
12 outlet
1
-
$871.70
F2821220
2" x 4' Copper Valved Manifold with R20 Threaded Ball and
Balancing Valves, 12 outlet
1
-
$965.30
F2821225
2" x 4' Copper Valved Manifold with R25 Threaded Ball and
Balancing Valves, 12 outlet
1
-
$1,018.35
www.uponor-usa.com
(800) 321-4739
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
Note: ProPEX Tool is required. ProPEX Rings must be purchased separately.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
Q2831263
2" x 4' Copper Valveless Manifold with 6" ProPEX, 12 outlet
1
-
$648.90
Q2831275
2" x 4' Copper Valveless Manifold with 6M" ProPEX, 12 outlet
1
-
$648.90
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
Q5806375
ProPEX Ball Valve, 6" PEX x 6M" Copper Adapter
-
10
$28.75
Q5807575
ProPEX Ball Valve, 6M" PEX x 6M" Copper Adapter
-
10
$30.35
Q5906375
ProPEX Ball and Balancing Valve, 6" PEX x 6M" Copper Adapter
-
10
$56.50
Q5907575
ProPEX Ball and Balancing Valve, 6M" PEX x 6M" Copper Adapter
-
10
$55.90
A5802075
Ball Valve, R20 Thread x 6M" Copper Adapter
-
10
$29.75
A5802575
Ball Valve, R25 Thread x 6M" Copper Adapter
-
10
$32.40
A5902075
Ball and Balancing Valve, R20 Thread x 6M" Copper Adapter
-
10
$60.30
A5902575
Ball and Balancing Valve, R25 Thread x 6M" Copper Adapter
-
10
$62.20
A2402000
2" Copper End Cap Spun End with drain and vent connections
1
-
$118.70
2" Copper Valveless
Manifold with ProPEX
Connection
Copper Valved
Manifold Accessories
Radiant Heating and Cooling Systems
Uponor (2" x 4') Valveless Copper Manifold (type L copper) featuring either 6" or 6M" branches, comes 4
inches on center, and is available in 12-outlet configurations.
HDPE Manifolds and Accessories
Multiple-outlet HDPE Valveless Manifolds are manufactured with 6M" or 1" 303 stainless steel ProPEX
fittings hydraulically pressed onto the outlet nipples. ProPEX connection and manifold are
maintenance-free and suitable for direct burial. TheyÕre ideal for applications larger than 5,000 square feet
or where flow requirements are greater than the capacity of other Uponor manifolds. The HDPE Valveless
Manifolds come with standard 12-inch on-center outlet spacing. The maximum recommended flow rates
for these manifolds are: 2-inch, 41 gpm; 3-inch, 116 gpm; 4-inch, 226 gpm.
HDPE Valveless Manifold
Note: ProPEX Tool is required. Only use in systems free of corrodible components or when there is
corrosion control. The temperature limitation is 140¡F at 80 psi.
Part No.
Part Description
Each Qty.
Pkg. Qty.
B2252751
2" x 10' HDPE Valveless Manifold (12" o.c.), 10 outlet, 6M" ProPEX
1
-
$2,111.95
B2272101
2" x 10' HDPE Valveless Manifold (12" o.c.), 10 outlet, 1" ProPEX
1
-
$2,111.95
B2252752
2" x 20' HDPE Valveless Manifold (12" o.c.), 20 outlet, 6M" ProPEX
1
-
$4,223.85
B2272102
2" x 20' HDPE Valveless Manifold (12" o.c.), 20 outlet, 1" ProPEX
1
-
$4,223.85
B2253751
3" x 10' HDPE Valveless Manifold (12" o.c.), 10 outlet, 6M" ProPEX
1
-
$2,186.50
B2273101
3" x 10' HDPE Valveless Manifold (12" o.c.), 10 outlet, 1" ProPEX
1
-
$2,186.50
B2253752
3" x 20' HDPE Valveless Manifold (12" o.c.), 20 outlet, 6M" ProPEX
1
-
$4,372.85
B2273102
3" x 20' HDPE Valveless Manifold (12" o.c.), 20 outlet, 1" ProPEX
1
-
$4,372.85
B2254751
4" x 10' HDPE Valveless Manifold (12" o.c.), 10 outlet, 6M" ProPEX
1
-
$2,261.00
B2274101
4" x 10' HDPE Valveless Manifold (12" o.c.), 10 outlet, 1" ProPEX
1
-
$2,261.00
B2254752
4" x 20' HDPE Valveless Manifold (12" o.c.), 20 outlet, 6M" ProPEX
1
-
$4,521.95
B2274102
4" x 20' HDPE Valveless Manifold (12" o.c.), 20 outlet, 1" ProPEX
1
-
$4,521.95
www.uponor-usa.com
(800) 321-4739
List Price/Ea.
Radiant Heating and Cooling Systems
19
Radiant Heating and Cooling Systems
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
HDPE Fittings
HDPE Elbow
HDPE Tee
HDPE Flange Adapter
HDPE Flange Backup Ring
HDPE End Cap
HDPE Reducing Coupling
20
Radiant Heating and Cooling Systems
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
B2162000
B2163000
HDPE 90-degree Elbow, 2" HDPE x 2" HDPE
1
-
$43.45
HDPE 90-degree Elbow, 3" HDPE x 3" HDPE
1
-
$89.55
B2164000
HDPE 90-degree Elbow, 4" HDPE x 4" HDPE
1
-
$132.10
B2192500
HDPE 45-degree Elbow, 2" HDPE x 2" HDPE
1
-
$44.40
B2193500
HDPE 45-degree Elbow, 3" HDPE x 3" HDPE
1
-
$88.50
B2194500
HDPE 45-degree Elbow, 4" HDPE x 4" HDPE
1
-
$130.95
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
B2172000
HDPE Tee, 2" HDPE x 2" HDPE x 2" HDPE
1
-
$57.65
B2173000
HDPE Tee, 3" HDPE x 3" HDPE x 3" HDPE
1
-
$97.60
B2174000
HDPE Tee, 4" HDPE x 4" HDPE x 4" HDPE
1
-
$143.40
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
B2182000
2" HDPE Flange Adapter
1
-
$83.70
B2183000
3" HDPE Flange Adapter
1
-
$109.45
B2184000
4" HDPE Flange Adapter
1
-
$122.85
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
B2192000
2" HDPE Flange Backup Ring
1
-
$69.45
B2193000
3" HDPE Flange Backup Ring
1
-
$67.75
B2194000
4" HDPE Flange Backup Ring
1
-
$75.75
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
B2202000
HDPE End Cap, 2" HDPE
1
-
$23.10
B2203000
HDPE End Cap, 3" HDPE
1
-
$50.20
B2204000
HDPE End Cap, 4" HDPE
1
-
$77.55
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
B2223020
HDPE Reducing Coupling, 3" HDPE x 2" HDPE
1
-
$53.80
B2224020
HDPE Reducing Coupling, 4" HDPE x 2" HDPE
1
-
$81.55
B2224030
HDPE Reducing Coupling, 4" HDPE x 3" HDPE
1
-
$82.25
www.uponor-usa.com
(800) 321-4739
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
The Climate Coùntrolª Multifunction hydronic controller is designed to simplify installations. This control
incorporates all mechanical functions required in radiant floor heating, boiler staging and control, domestic
hot water (DHW), snow melt, zone pumping and supply water temperature mixing. Input connections use
a simple push-style connector and outputs use Cat5 cables and connector to control the output devices.
Use the simple five-button display to set up and activate the functionality required for the individual
installation. A data stick is included to save the setup configuration.
Part No.
Part Description
A8020000
Multifunction Hydronic Control
Each Qty.
Pkg. Qty.
1
-
List Price/Ea.
$1,360.00
The Climate Coùntrol Multifunction unit controls and stages up to four boilers. Use the Boiler Relay to
mount on or near the boiler. Connect to the Climate Coùntrol Multifunction unit using a standard Cat5 cable
with RJ45 ends.
Part No.
Part Description
A9012010
Boiler Relay, On-Off
Each Qty.
Pkg. Qty.
List Price/Ea.
1
-
$80.00
The Climate Coùntrol Multifunction unit provides mixing control of any Three-way Modulating Valves
(0-10VDC) up to three different water temperatures in either radiant heating or snow-melting applications.
Mount the Modulating Valve Control on or near the valve. Connect to the Climate Coùntrol Multifunction
unit using a standard Cat5 cable with RJ45 ends. Uponor offers three-way valves with the valve control
pre-wired and mounted to the motor.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A9013021
6M" Three-way Modulating Valve with Control (Cv = 4.7)
1
-
$615.00
A9013022
1" Three-way Modulating Valve with Control (Cv = 10.0)
1
-
$665.00
A9013023
156M" Three-way Modulating Valve with Control (Cv = 19.0)
1
-
$780.00
A9013024
156O" Three-way Modulating Valve with Control (Cv = 29.0)
1
-
$1,025.00
A9063020
Modulating Valve Control, 0-10V
1
-
$75.00
The Climate Coùntrol Multifunction unit controls any pump or circulator up to 3A for primary, domestic,
snow melt, secondary or zone pump operation. Mount the Pump Relay on or near the pump. Connect to
the Climate Coùntrol Multifunction unit using a standard Cat5 cable with RJ45 ends.
Part No.
Part Description
A9013030
Pump Relay
Climate Coùntrol
Multifunction
Each Qty.
Pkg. Qty.
List Price/Ea.
1
-
$118.00
The Climate Coùntrol Multifunction unit supports snow-melt operation for up to two zones through the use
of the Uponor Snow-melt Sensor, which wires to the main control panel using a Cat5 cable and RJ45 ends
for simple and easy connections.
Boiler Relay
Radiant Heating and Cooling Systems
Climate Coùntrolª Multifunction
Three-way Modulating Valve
with Control
Pump Relay
Snow-melt Accessories
Note: Use the Automatic Snow and Ice Sensor for full automatic operation. The Snow-melt Sensor
connects to the Climate Coùntrol Multifunction unit using a standard Cat5 cable with RJ45 ends.
Part No.
Part Description
Each Qty.
Pkg. Qty.
A9013051
A9013052
Snow-melt Sensor (includes 10k sensor and well)
1
-
$325.00
Automatic Snow and Ice Sensor (includes cup and sensor)
1
-
$2,035.00
www.uponor-usa.com
(800) 321-4739
List Price/Ea.
Radiant Heating and Cooling Systems
21
Radiant Heating and Cooling Systems
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
Sensors
Climate Coùntrol
Multifunction Replacement
Parts and Accessories
Three-way Tempering Valve
The Climate Coùntrol Multifunction unit provides a variety of sensors to provide temperature information.
The Dual Sensor reads tubing temperatures for secondary (mixed) or primary loops. The Outdoor Sensor
connects to the Multifunction Climate Coùntrol with 18-2 AWG thermostat wire to a dedicated terminal. The
Domestic Hot Water (DHW) Sensor and Dual Sensor connect using standard Cat5 cables with RJ45 ends to
the appropriate device or control.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A9012002
A9013001
Domestic Hot Water (DHW) Sensor, 10k
1
-
$55.00
Dual Sensor, Supply and Return, 10k
1
-
$77.00
A9011001
Outdoor Sensor,10k (replacement part)
1
-
$70.00
The following tools, cables and accessories are available to complete and simplify the Climate Coùntrol
Multifunction installation.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A8010002
Data Stick (replacement part)
1
-
$40.00
A8010004
Replacement Display
1
-
$110.00
A9030001
Cat5 Patch Cable (1 ft.)
1
-
$9.65
A9030003
Cat5 Patch Cable (3 ft.)
1
-
$13.90
A9030007
Cat5 Patch Cable (7 ft.)
1
-
$20.30
A9030015
Cat5 Patch Cable (15 ft.)
1
-
$36.45
A9030100
Cable Tester
1
-
$331.20
A9030200
Cat5 Cable Stripper
1
-
$96.30
A9030300
Modular Plug Crimping Tool
1
-
$184.85
A9030111
RJ45 Connectors, 50 pack
-
50
$106.55
A9031000
Cat5 Wire, 1,000-ft. roll
1
-
$333.75
The 1" Three-way Tempering Valve thermostatically controls water temperature ranges between 80 and
160¡F. Non-corrosive reactive valve, 1-inch nominal sweat union connections. Cv 4.0
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A5400102
1" Three-way Tempering Valve
1
-
$317.47
A5401112
1" Three-way Tempering Valve w/Union
1
-
$273.60
A5401110
1" Three-way Tempering Valve Replacement Gaskets, set of three
1
-
$7.95
Mixing Controls
Differential Pressure
By-pass Valve
22
The self-acting, automatic Differential Pressure By-pass Valve maintains flow rates (e.g., through a
low-water content gas boiler), or controls the differential pressure in a hydronic heating system. Valves
come with NPT unions.
Radiant Heating and Cooling Systems
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A5410750
6M" Differential Pressure By-pass Valve
1
-
$263.00
A5411000
1" Differential Pressure By-pass Valve
1
-
$286.00
www.uponor-usa.com
(800) 321-4739
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
The Climate Coùntrol Zoning System Starter Kit includes a Base Unit (C-55), an Interface (I-75), a removable
antenna, cables for connections, mounting accessories, instructions and a manual. Located near the radiant
system manifolds, the Base Unit can handle up to 12 thermostats (sold separately) and control up to 14
thermal actuators (sold separately). Each actuator controls the flow of the water through loops of PEX
tubing in a radiant system.
Part No.
Part Description
A3601000
Climate Coùntrol Zoning System Starter Kit (Base Unit, Interface, Cables, Antenna)
Climate Coùntrol Zoning
System Starter Kit
List Price/Ea.
$797.40
Located near the radiant system manifolds, the Base Unit can handle up to 12 thermostats (sold separately)
and control up to 14 thermal actuators (sold separately). Each actuator controls the flow of the water
through loops of PEX tubing in a radiant system. An interface (I-75) can be added for additional features
(sold separately).
Part No.
Part Description
A3601012
Zoning Base Unit (C-55), 12 Zones
List Price/Ea.
$511.20
The wireless Zoning Thermostat (T-75) works with the Climate Coùntrol Zoning System. With sensors for
optimal temperature measurement and battery-status indicators, the thermostat is available in either white
or silver finish. Each thermostat uses two standard AAA batteries. Setpoint temperature range is 41¡F
(5¡C) to 95¡F (35¡C).
Part No.
Part Description
A3600075
Zoning Thermostat (T-75), white
$126.25
A3600275
Zoning Thermostat (T-75), silver
$193.20
Part Description
A3601075
Zoning Interface (I-75)
$319.45
Part No.
Part Description
A3600175
Zoning Thermostat Mounting Kit, white
$10.30
A3600375
Zoning Thermostat Mounting Kit, silver
$27.95
Part Description
Zoning Base Unit Antenna, replacement
www.uponor-usa.com
(800) 321-4739
Zoning Thermostat
Mounting Kit
List Price/Ea.
The Zoning Base Unit Antenna is a replacement part for the Zoning Base Unit.
A3601001
Zoning Interface (I-75)
List Price/Ea.
The Zoning Mounting Kit uses double-stick pads (included) to mount the thermostat (T-75) on tile or
other smooth surfaces. The kit also includes a table stand to place the thermostat anywhere.
Part No.
Zoning Thermostat (T-75)
List Price/Ea.
The Zoning Interface (I-75) allows users to view system temperatures and status. The interface can connect
up to three base units with a regular telephone cable and program up to five temperature setbacks. It also
designates room names for each thermostat, and displays system issues. Additional features include valve
and pump exercises, vacation scheduling and automatic summer and winter settings.
Part No.
Zoning Base Unit
Radiant Heating and Cooling Systems
Climate Coùntrol Zoning System
Zoning Base Unit Antenna
List Price/Ea.
$259.55
Radiant Heating and Cooling Systems
23
Radiant Heating and Cooling Systems
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
Zoning Cable Kit
Zoning Language Stick
Two-wire Thermal Actuator
for TruFLOW Manifold
The replacement Zoning Cable Kit includes all needed cables (1-ft. antenna cable,10-ft. antenna cable and
10-ft. display cable).
Part No.
Part Description
List Price/Ea.
A3601002
Zoning Cable Kit
$23.55
The Zoning Language Stick is a replacement part for the Zoning Interface (I-75).
Part No.
Part Description
A3600005
Zoning Language Stick, replacement
List Price/Ea.
$41.80
Two-wire, slow-opening thermal actuator, mounts directly onto TruFLOWª Classic and Jr. valved manifolds
and connects to the Zoning base unit (C-55). It provides individual loop flow control on a multi-zoned
manifold (a manifold serving more than one zone).
Part No.
Part Description
List Price/Ea.
A3030522
Two-wire Thermal Actuator (for EP Heating Manifold)
$56.10
A3030523
Two-wire Thermal Actuator (for TruFLOW Classic and Jr. Valved Manifolds)
$59.75
Zoning Controls
Room Thermostat
SetPoint 501 Controller
24
The Heat-only Thermostat (A3030101) and the Heat and Cool Thermostat (A3030102) are designed to
operate in heating mode over two wires. These types of thermostats obtain their power for operation from
taking voltage from the connected wiring. Different from other industry power-sharing thermostats, these
eliminate any need for a third wire or battery, which makes the thermostats simple to install, wire and
service. For those times when the two-wire thermostats arenÕt appropriate because of incompatibility with
some third-party devices, Uponor also offers the Heat-only, Three-wire Thermostat (A3030103).
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A3030101
Heat-only Thermostat, two-wire
1
-
$86.95
A3030103
Heat-only Thermostat, three-wire
1
-
$90.50
A3030102
Heat and Cool Thermostat
1
-
$107.30
The SetPoint 501 is a single-stage, non-programmable setpoint controller designed to sense air
temperature only. Control is not back-lit.
Radiant Heating and Cooling Systems
Part No.
Part Description
A3040501
SetPoint 501, Single-stage SetPoint Controller
A3040007
Cover Plate for 500 Series Controllers
Each Qty.
Pkg. Qty.
List Price/Ea.
1
-
$155.45
-
10
$24.40
www.uponor-usa.com
(800) 321-4739
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A3041501
SetPoint 501s, Single-stage SetPoint Controller with floor sensor
1
-
$248.55
A3040079
Floor Sensor, replacement part
1
-
$77.85
A3040007
Cover Plate for 500 Series Controllers
-
10
$24.40
A3041511
SetPoint 511s, Single-stage Programmable Controller with
floor sensor
1
-
$311.00
A3040512
SetPoint 512, Two-stage Programmable Controller
1
-
$297.20
SetPoint 150 Controller features include flexible setpoint range (-40¡F to 239¡F), adjustable differential
and time-delay ranges and an LCD display. The control can be wired up to 500 feet using 18 AWG wire. Use
the Universal Sensor (A3060071), included with the setpoint control, for strap-on or immersion well. For
direct burial, use the optional sensor (A3060072) for slab sensing.
Part No.
Part Description
A3040150
SetPoint 150 Controller
A3060071
Universal Sensor, replacement part
Each Qty.
Pkg. Qty.
List Price/Ea.
1
-
$360.00
-
10
$70.80
The Zone Control Module is designed for use with Uponor Thermostats, Motorized Valve Actuators (MVAs),
Thermal Actuators or Zone Valves. The Zone Control Module provides connection between the thermostats and
their respective actuators or zone valves, and the connection between the end switches and the pump or boiler
relay. The modules are internally fused for protection from over current or direct shorts from the power supply
transformer. The end switch circuit is also protected from over current, and a 2 amp fuse is factory installed.
Part No.
Part Description
Each Qty.
Pkg. Qty.
A3030003
A3030004
Three-zone Control Module
1
-
$96.75
Four-zone Control Module
1
-
$117.60
A3030009
Replacement Fuse (2 amps), 4/pkg.
1
-
$13.40
A3030010
Replacement Fuse (4 amps), 4/pkg.
1
-
$13.40
Part Description
A3080404
A3080406
Each Qty.
Pkg. Qty.
List Price/Ea.
Powered Four-zone Controller
1
-
$206.60
Powered Six-zone Controller
1
-
$263.00
The low-voltage (24VAC) Isolation Card provides separation or isolation between power-sharing thermostats
and the loads they control. The cards also isolate power variations caused by third-party components.
Part No.
Part Description
A3030111
A3030113
Each Qty.
Pkg. Qty.
Single Isolation Card (24VAC)
1
-
$54.55
Triple Isolation Card (24VAC)
1
-
$119.70
www.uponor-usa.com
(800) 321-4739
SetPoint 150 Controller
Zone Control Module
List Price/Ea.
The Powered Four- and Six-zone Controllers include transformers for low-voltage operations and relays to
operate line-voltage controls. Fully fuse-protected, they also include an isolated end switch and built-in
DHW priority switch. The indicator lights show full functionality of the products wired to the Powered Zone
Controllers. A 3-amp delay fuse protects the Powered Four-zone Controller. A 7-amp delay fuse protects
the Powered Six-zone Controller.
Part No.
SetPoint 501s, 511s, 512
Controllers
Radiant Heating and Cooling Systems
The SetPoint 501s is a single-stage, non-programmable setpoint controller designed to sense air, floor or both
temperatures with the ability to select one or the other as the primary sensing point (floor sensor included).
Powered Zone Controller
Isolation Card
List Price/Ea.
Radiant Heating and Cooling Systems
25
Radiant Heating and Cooling Systems
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
Slow-opening thermal actuator (24VAC) mounts directly onto TruFLOW Valved Manifolds. It provides
individual loop flow control on a multi-zoned manifold (manifold serving more than one zone). Thermal
Actuator includes end switch for activation of relay (pump), heat plant or other auxiliary devices.
Thermal Actuator
Motorized Valve Actuator
(MVA)
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A3020416
Thermal Actuator, two-wire
1
100
$76.00
A3010522
Thermal Actuator, four-wire
1
100
$81.50
The Motorized Valve Actuator (MVA) (24VAC) features quick-opening motorized valve head that mounts
directly onto TruFLOW Valved Manifolds. The open/close indicator allows for easy visual inspection. It
provides individual flow control on a multi-zoned manifold (manifold serving more than one zone). MVA
includes end switch for activation of relay (pump), heat plant or other auxiliary devices. Do not mount
actuators upside down.
Part No.
Part Description
A3020522
Motorized Valve Actuator (MVA), four-wire
Each Qty.
Pkg. Qty.
List Price/Ea.
1
50
$110.65
Four-wire Zone Valve (24 VAC) features 6M- and 1-inch sweat connections. It provides flow control for a
single-zoned manifold (manifold serving one zone), and has a built-in flow-balancing feature. The zone
valve includes end switch for activation of relay (pump), heat plant or other auxiliary devices. Do not
mount actuators upside down.
Zone Valve
Pump Relay
Part No.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A3010525
6M" Thermal Zone Valve, four-wire
1
25
$183.35
A3010526
1" Thermal Zone Valve, four-wire
1
25
$196.20
A3070525
6M" MVA Zone Valve, four-wire
1
25
$224.10
A3070526
1" MVA Zone Valve, four-wire
1
25
$236.60
The Single-zone Pump Relay controls the operation of a single circulator or pump from a 24-volt signal.
Relay includes secondary low-voltage terminals for boiler operation.
The Three-zone Multi-pump relay controls the operation of up to three pumps or circulators from
dedicated 24-volt signals. Relay includes secondary low-voltage terminals for boiler operation and DHW
priority options.
Transformer
26
Radiant Heating and Cooling Systems
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A3010100
A3080301
Single-zone Pump Relay
1
-
$107.95
Three-zone Multi-pump Relay
1
-
$301.10
Each Qty.
Pkg. Qty.
List Price/Ea.
1
-
$37.10
50 VA Transformer (24VAC) comes with a 4" x 4" metal mounting plate.
Part No.
Part Description
A3050050
50 VA Transformer
www.uponor-usa.com
(800) 321-4739
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
UponorÕs Climate Coùntrol Network System offers a variety of configuration of the main controllers that get mounted into a cabinet. See the table
below to correctly identify the controls required in the main cabinet to provide the necessary functionality.
Control Functions by Part Number
Part Number
Functionality
A9011000
Thermostats and Air System Functionality
A9012000
Boilers, Domestic Hot Water Tank(s) and Primary Pump
A9013000
Mixing and Snow Melting
A9014000
Zone Pumping
The Router Main Control (RTR) provides connections to the Digital Zone Control Modules and other
devices such as the Furnace and Air Conditioning Heat Recovery Ventilator and Zone Valve Damper
control boards. The control also provides a connection to the internet for remote viewing (optional). All
connections are RJ45 and use Cat5 wire to communicate to devices. The internet is not a requirement for
system operation. Includes control cabinet mounting screws and power connector.
Part No.
Part Description
List Price/Ea.
A9011000
Router Main Control (RTR)
$2,095.00
The Primary Equipment Control (PEC) provides connections to the boiler(s), primary pump, domestic hot
water tanks, outdoor sensor and an option system sensor. All connections are RJ45 and require the use
of a Cat5 wire for the Primary Equipment Control (PEC) to communicate with the other devices. Includes
control cabinet mounting screws and power and communication cable with plugs to interconnect controls.
Part No.
Part Description
List Price/Ea.
A9012000
Primary Equipment Control (PEC)
$1,145.00
The Supply Water Temperature Control (SWT) provides connections to the mixing devices and secondary
pumps. The SWT can control either modulating valves or injection pumps or a combination of both. All
connections are RJ45 and require the use of a Cat5 wire for the SWT to communicate with the other
devices. Includes control cabinet mounting screws and power and communication cable with plugs to
interconnect controls.
Part No.
Part Description
List Price/Ea.
A9013000
Supply Water Temperature Control (SWT)
$1,140.00
The Zone Pump Control (ZPC) provides connections to zone pumps used in the system in radiant,
baseboard, hot water coil or high temperature applications. All connections are RJ45 and require the use of
a Cat5 wire for the ZPC to communicate with the other devices. Includes control cabinet mounting screws
and power and communication cable with plugs to interconnect controls.
Part No.
Part Description
List Price/Ea.
A9014000
Zone Pump Control (ZPC)
$1,145.00
www.uponor-usa.com
(800) 321-4739
Network Router Main
Control (RTR)
Radiant Heating and Cooling Systems
Climate Coùntrol Network System
Network Primary Equipment
Control (PEC)
Network Supply Water
Temperature Control (SWT)
Network Zone Pump Control
(ZPC)
Radiant Heating and Cooling Systems
27
Radiant Heating and Cooling Systems
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
Network Control
Cabinetsand Components
Network Digital Zone
Control Module (DZCM)
Network Furnace and Air
Condition Control (FAC)
Network Heat Recovery
Ventilator Control (HRV)
28
The Climate Coùntrol Network System Control Cabinet is a low-profile enclosure that houses all main
controllers (RTR, PEC, SWT, ZPC). The cabinet is powder-coated white and can mount in either a righthand or left-hand hinged configuration. Includes hinged inner door with screw lock to conceal network
cable and connectors.
Part No.
Part Description
List Price/Ea.
A9010000
Control Cabinet, 4-position
$625.00
A9010001
Control Cabinet, 3-position
$565.00
A9010002
Control Cabinet, 2-position
$495.00
A9010003
Control Cabinet, 1-position
$430.00
A9060001
Main Panel Power Cable with Plug (24vac), replacement part
$35.00
A9060002
Main Panel Interconnect Cable with Plugs, replacement part
$46.00
The Network Digital Zone Control Module (DZCM) is a control board that provides connections to the
Network System thermostats and plug-in actuators. The DZCM requires 24VAC to power the control,
actuators and thermostats. The DZCM uses a rotary address switch and requires a unique address number
for each DZCM used in the system. The molex or plug-in connectors allow for simple and easy installation
when using the Thermal Valve Actuator with Molex Plug (A9010501). Not for use with other actuators.
The Digital Zone Control Module communicates with the Router Main Control over Cat5 wire and RJ45
connectors.
Part No.
Part Description
List Price/Ea.
A9011500
Digital Zone Control Module (DZCM)
$1,095.00
A9010501
Thermal Valve Actuator with Molex Plug
$88.00
The Network Furnace and Air Condition (FAC) Control board provides control of Fan, Air Heat, Cooling,
Humidification and Dehumidification functions. This device is used for operation of air handlers, furnaces
and rooftop units. The FAC has two additional contacts for 10K sensors for additional system feedback.
All connections are screw terminals blocks and are removable from the board for ease of wiring. The board
comes with a manual switch that can be set in the Off-Auto-Manual positions. The FAC requires 24VAC and
communicates with the Router Main Control over Cat5 wire and RJ45 connectors.
Part No.
Part Description
A9011100
Furnace and Air Condition Control (FAC)
List Price/Ea.
$620.00
The Network Heat Recovery Ventilator (HRV) Control board provides control of up to three speeds of
operation: Low, Medium and High. All connections are screw terminals blocks and are removable from the
board for ease of wiring. The board comes with a manual switch that can be set in the Off-Auto-Manual
positions. The HRV communicates with the Router Main Control over Cat5 wire and RJ45 connectors along
with power for the board.
Radiant Heating and Cooling Systems
Part No.
Part Description
A9011200
Heat Recovery Ventilator Control (HRV)
A9010201
VOC-CO2 Indoor Air Quality Sensor, optional
List Price/Ea.
$555.00
$2,350.00
www.uponor-usa.com
(800) 321-4739
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
Part No.
Part Description
A9011400
Zone Valve and Damper Control (ZVD)
List Price/Ea.
$685.00
The Network Generic Input/Output (GIO) board provides control of up to eight low-voltage devices for
On-Off operation along with detecting eight switched inputs. All connections are screw terminals blocks
and are removable from the board for ease of wiring. Jumper pins on the board can be set for dry contact
or powered switching along with address number and device type. The board comes with a manual switch
that can be set in the Off-Auto-Manual positions. The GIO board communicates with the Router Main
Control over Cat5 wire and RJ45 connectors and requires a 24VAC power source.
Part No.
Part Description
A9011600
Network Generic Input/Output (GIO)
$755.00
Part No.
Part Description
A9012010
Boiler Relay, On-Off
$80.00
A9012020
Boiler Relay, Modulating 0-10VDC
$70.00
A9063020
Modulating Valve Control, 0-10v
$75.00
A9013030
Pump Relay, On-Off
A9013040
Network Variable Speed Pump Control, Modulating 0-10VDC
Part No.
Part Description
A9013021
6M" Three-way Modulating Valve w/control, 0-10v (Cv=4.7)
$615.00
A9013022
1" Three-way Modulating Valve w/control, 0-10v (Cv=10)
$665.00
A9013023
156M" Three-way Modulating Valve w/control, 0-10v (Cv=19)
$780.00
A9013024
156O" Three-way Modulating Valve w/control, 0-10v (Cv=29)
$1,025.00
A9013098
Replacement Powerhead only for 6M" and 1" valves, replacement part
$285.00
A9013099
Replacement Powerhead only for 156M" and 156O" valves, replacement part
$485.00
Part Description
Snow Melt Control, includes 10k sensor
A9013052
Automatic Snow and Ice Sensor (includes cup and sensor)
A9013053
Snow melt Slab Sensor (10k), replacement part
www.uponor-usa.com
(800) 321-4739
Network Relay
List Price/Ea.
$118.00
$61.00
List Price/Ea.
The Climate Coùntrol Network System features for easy integration of zoned snow melting for up to four
(4) different areas. The snow melting can automatically or manually with the Snow/Ice sensor (sold
separately). A 10k slab sensor is included with the Network Snow-melt Control.
A9013051
Network Generic Input/
Output (GIO) Control
List Price/Ea.
The Climate Coùntrol Network System features a series of Network Device Controls, specific for the
equipment the network will control. Each control connects with the main panel controllers over a Cat5 wire
and RJ45 connectors. Connection points inside the panel will depend on the function it serves. Inside each
enclosure, a switch is provided for Auto and Manual operation. LEDs on the case provide feedback to the
mode of operation and if the device is wired correctly. Each control has a 6M" thread for mounting directly
to the equipment or to a standard electrical box knockout. The Variable Speed Pump Control requires a
pump that will accept a 0-10VDC control signal.
Part No.
Network Zone Valve Damper
Control (ZVD)
Radiant Heating and Cooling Systems
The Network Zone Valve Damper (ZVD) Control provides control of up to eight zone valves or zone
dampers for On-Off operation. All connections are screw terminals blocks and are removable from the
board for ease of wiring. Jumper pins on the board can be set for dry contact or powered switching along
with address number and device type (valves or dampers). The board comes with a manual switch that can
be set in the Off-Auto-Manual positions. The Zone Valve Damper Control (ZVD) communicates with the
Router Main Control over Cat5 wire and RJ45 connectors and requires a 24VAC power source.
Modulating Valve
Network Snow melting
Control
List Price/Ea.
$325.00
$2,035.00
$52.00
Radiant Heating and Cooling Systems
29
Radiant Heating and Cooling Systems
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
Network Thermostat
Network System Sensor
Network System Wiring
Accessories
Network Touch Panel
Interface (TPI)
30
The Network System uses a proprietary new style thermostat to control and integrate the heating, cooling
and ventilation requirements of todayÕs market. The flush-mount thermostats are low-profile, and use
remodeller wings to attach behind walls 56O" to 6M" thick. The surface mount attaches to a standard
electrical box or can fix to any flat surface using screws or anchors (not included). All styles include an air
sensor, humidity sensor (%RH) and option terminals for slab sensing if required. A plug makes for simple
and easy connections using 18/2 AWG LVT and controls up to two stages of heating, two stages of cooling
and supplemental all over two wires. The thermostats are polarity sensitive and cannot be used with
conventional control systems. An option wall sensor is available for installations requiring invisible room
control while keeping the same functionality.
Part No.
Part Description
A9010510
Surface-mount Thermostat, vertical display
List Price/Ea.
$250.00
A9010520
Flush-mount Thermostat, vertical display
$235.00
A9010530
Flush-mount Thermostat, horizontal display
$235.00
A9010540
Wall Sensor, no display
$200.00
A9010599
Slab Sensor, 10k
$33.00
The Climate Coùntrol Network System uses a variety of sensors to provide feedback and information to the
main controls. From sensing tubing temperature to domestic hot water to an optional system pressure
sensor, all sensors easily connect to the system, simplifying wiring and reducing the amount of wire
required in conventional control systems.
Part No.
Part Description
A9012005
Outdoor Sensor, 10k
List Price/Ea.
$70.00
A9012002
Domestic Hot Water (DHW) Tank Sensor, 10k
$55.00
A9012003
Domestic Hot Water Recirculation Sensor, 10k
$69.00
A9012004
System Pressure Sensor, On-Off
$395.00
A9013001
Supply and Return Sensor, 10k
$77.00
The Network System uses Cat5 connections and cables to connect the different hardware throughout an
installation. Use the Wire Converter in retrofit applications where it is necessary to convert a pair of 18-2
low-voltage thermostat wires to Cat5. The Network Y-Connector is used when daisy-chaining controls to
simplify systems and eliminate additional wiring.
Part No.
Part Description
A9011002
Network Wire Converter
List Price/Ea.
$29.00
A9011003
Network Y-Connector
$45.00
The Touch Panel Interface (TPI) is a 5" x 7" high-definition touch screen that can integrate into any Climate
Coùntrol Network System. The screens provide the end user simple access to all the functions setting
through a simple-to-use, high-quality graphical program at one location. Items include: viewing rooms,
changing room temperatures, changing modes, setting schedules along with domestic hot water, snowmelt functionality and much more. Multiple TPIs can be installed in a single system.
Radiant Heating and Cooling Systems
Part No.
Part Description
List Price/Ea.
A9070000
Touch Panel Interface (TPI)
$2,995.00
www.uponor-usa.com
(800) 321-4739
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
Part No.
Part Description
A9090000
Uponor Configuration Tool (UCT 1.0) Software Package
Network Configuration Tool
(UCT)
List Price/Ea.
$600.00
Fully Assembled Panels
The proPANEL¨ 90 unit offers a simple pumping station, used for radiant heating or as a high-temperature
loop. The proPANEL 90 is pre-wired to a control interface, meaning the pump relay is connected to the
control interface using a Cat5 cable. The panel is prepared to connect to the Climate Coùntrol Multifunction
hydronic controller. The panel features 1-inch steel piping. The maximum recommended flow is 9 gpm.
proPANEL 90
Radiant Heating and Cooling Systems
Uponor provides a high-quality graphical software program that allows the installer to properly set up and
configure the system. The package comes with a USB key and software CD. The CD contains the necessary
files to run UCT product manuals, instruction sheets and other help files. The USB key is required to be
plugged into the laptop or computer the UCT program is running on. The key is not needed to access
manuals and documentation.
Panel dimensions are 18" wide, 26" high and 7" deep; weighs 26 lbs.
Part No.
Part Description
A3509000
proPANEL 90
Each Qty.
Pkg. Qty.
1
-
List Price/Ea.
$1,760.00
The proPANEL 90Z unit offers a pumping station with zoning capability (two zones). Featuring 1-inch
valves for zoning, the proPANEL 90Z is pre-wired to a control interface, meaning the pump relay is
connected to the control interface using a Cat5 cable. The two actuators controlling the valves are also
pre-wired into the interface. The panel Is prepared to connect to the Climate Coùntrol Multifunction
hydronic controller. The panel features 1-inch stainless steel piping on the primary side and 6M-inch
stainless steel piping on the secondary side. The maximum recommended flow is 4.5 gpm per outlet.
proPANEL 90Z
The panel features 1-inch stainless steel piping. The maximum recommended flow is 9 gpm.
Panel dimensions are 18" wide, 26" high and 7" deep; weighs 32 lbs.
Part No.
Part Description
Each Qty.
Pkg. Qty.
A3509002
proPANEL 90Z
1
-
List Price/Ea.
$2,550.00
The proPANEL 90M unit offers a one-temperature mixing and pumping station using a three-way
motorized mixing valve (0-10V). The proPANEL 90MZ is controlled by connecting it to a Multifunction unit.
proPANEL 90M
The proPANEL 90M is pre-wired to a control interface, meaning the pump relay and the mixing valve are
connected to the control interface using a Cat5 cable. Sensors are attached to the tubing to monitor the
secondary supply temperature at the selected level. They are also pre-wired to the control interface.
The panel features 1-inch stainless steel piping. The maximum recommended flow is 9 gpm.
Panel dimensions are 18" wide, 26" high and 7" deep; weighs 30 lbs.
Part No.
Part Description
Each Qty.
Pkg. Qty.
A3509500
proPANEL 90M
1
-
www.uponor-usa.com
(800) 321-4739
List Price/Ea.
$2,380.00
Radiant Heating and Cooling Systems
31
Radiant heating and cooling systems
Uponor Radiant Heating and Cooling Systems
proPANEL 90MZ
The proPANEL 90MZ unit offers a one-temperature mixing and pumping station with zoning capacity (two
zones). The proPANEL 90MZ uses 1-inch valves for zoning and a three-way motorized mixing valve (010V) for mixing. To control the proPANEL 90MZ, it must connect to a Multifunction. The proPANEL 90MZ
is pre-wired to a control interface, meaning the pump relay and the mixing valve are connected to the
control interface using a Cat5 cable. Sensors are attached to the tubing to maintain the secondary supply
temperature at the selected level, those are also pre-wired to the control interface. The two actuators
controlling the valves are also pre-wired into the control interface.
The panel features 1" stainless steel piping. The maximum recommended flow is 4.5 gpm per outlet.
Panel dimensions are 18" wide, 26" high and 7" deep; weighs 37 lbs.
Part No.
Part Description
Each Qty.
Pkg. Qty.
A3509502
proPANEL 90MZ
1
-
List Price/Ea.
$3,250.00
ProPEX Fittings
ProPEX Ring
A ProPEX Ring is required to make a ProPEX connection. The Z\x" and C\v" rings now include a leading edge
chamfer and integral stop edge to further simplify the use of ProPEX fittings. Red and blue print on the
rings distinguishes hot and cold lines.
3
ProPEX EP coupling
Part No.
Part Description
Pkg. Qty.
case Qty.
List Price/Ea.
Q4690302
ProPEX Ring, C\,"
50
500
$0.17
Q4690511
ProPEX Ring with Stop, Z\x" (red print)
50
2,000
$0.17
Q4690512
ProPEX Ring with Stop, Z\x"
50
2,000
$0.17
Q4690756
ProPEX Ring with Stop, C\v"
50
1,000
$0.30
Q4680625
ProPEX Ring, B\,"
50
1,000
$0.35
Q4681000
ProPEX Ring, 1"
50
500
$0.50
Q4681250
ProPEX Ring, 1Z\v"
10
200
$0.80
Q4681500
ProPEX Ring, 1Z\x"
5
100
$1.05
Q4682000
ProPEX Ring, 2"
10
100
$2.15
Pkg. Qty.
case Qty.
ProPEX EP Coupling makes PEX-to-PEX connections.
Note: ProPEX Tool is required. ProPEX Rings sold separately.
Part No.
Part Description
List Price/Ea.
Q4773838
ProPEX EP Coupling, C\," PEX x C\," PEX
25
100
$1.30
Q4775050
ProPEX EP Coupling, Z\x" PEX x Z\x" PEX
25
100
$1.35
Q4776363
ProPEX EP Coupling, B\," PEX x B\," PEX
10
100
$3.55
Q4777575
ProPEX EP Coupling, C\v" PEX x C\v" PEX
25
100
$1.65
Q4771010
ProPEX EP Coupling, 1" PEX x 1" PEX
10
100
$2.50
Q4771307
ProPEX EP Coupling, 1Z\v" PEX x C\v" PEX
10
100
$5.35
Q4771310
ProPEX EP Coupling, 1Z\v" PEX x 1" PEX
10
100
$5.55
Q4771313
ProPEX EP Coupling, 1Z\v" PEX x 1Z\v" PEX
10
100
$6.30
Q4771507
ProPEX EP Coupling, 1Z\x" PEX x C\v" PEX
10
100
$6.40
Q4771510
ProPEX EP Coupling, 1Z\x" PEX x 1" PEX
10
100
$6.50
Q4771513
ProPEX EP Coupling, 1Z\x" PEX x 1Z\v" PEX
10
100
$6.60
Q4771515
ProPEX EP Coupling, 1Z\x" PEX x 1Z\x"" PEX
10
100
$6.75
Q4772020
ProPEX EP Coupling, 2" PEX x 2" PEX
5
-
$58.30
3Discontinued item; available while quantities last. Please contact Uponor Customer Service for availability. All sales are final.
32
Radiant heating and cooling systems
www.uponor-usa.com
(800) 321-4739
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
ProPEX Brass Coupling
Note: ProPEX Tool is required. ProPEX Rings sold separately.
*
*
*
*
*
*
Part No.
Part Description
Pkg. Qty.
Case Qty.
Q4543838
ProPEX Brass Coupling, 6" PEX x 6" PEX
25
100
List Price/Ea.
$3.05
Q4545050
ProPEX Brass Coupling, 56O" PEX x 56O" PEX
25
100
$2.70
Q4546363
ProPEX Brass Coupling, 6" PEX x 6" PEX
10
100
$5.20
Q4547575
ProPEX Brass Coupling, 6M" PEX x 6M" PEX
25
100
$5.65
Q4541010
ProPEX Brass Coupling, 1" PEX x 1" PEX
10
100
$10.00
Q4542020
ProPEX Brass Coupling, 2" PEX x 2" PEX
5
-
$102.95
ProPEX DZR Brass Coupling makes PEX-to-PEX connections. DZR fittings are safe for direct burial in soil.
ProPEX DZR Brass Coupling
Radiant Heating and Cooling Systems
ProPEX Brass Coupling makes PEX-to-PEX connections.
Note: ProPEX Tool is required. ProPEX Rings sold separately.
Part No.
*
* G4541010
* G4541313
* G4541515
* G4542020
G4547575
Each Qty.
Pkg. Qty.
ProPEX DZR Brass Coupling, 6M" PEX x 6M" PEX
Part Description
-
10
List Price/Ea.
$8.80
ProPEX DZR Brass Coupling, 1" PEX x 1" PEX
-
10
$12.30
ProPEX DZR Brass Coupling, 156M" PEX x 156M" PEX
-
10
$27.30
ProPEX DZR Brass Coupling, 156O" PEX x 156O" PEX
-
10
$42.05
ProPEX DZR Brass Coupling, 2" PEX x 2" PEX
-
5
$151.95
ProPEX Brass to Polyethylene (PE) Coupling transitions black PE tubing to Uponor PEX tubing. Product
does not include hose clamps for the PE side of the coupling.
ProPEX Brass to
Polyethylene (PE) Coupling
Note: ProPEX Tool is required. ProPEX Rings sold separately.
Part No.
Part Description
Q4591010
ProPEX Brass to PE Coupling, 1" PEX x 1" PE
Pkg. Qty.
Case Qty.
List Price/Ea.
10
100
$17.65
ProPEX Brass to Polybutylene (PB) Coupling transitions PB tubing to Uponor PEX tubing. Product does
not include the crimp ring for the PB side of the coupling.
ProPEX Brass to
Polybutylene (PB) Coupling
Note: ProPEX Tool is required. ProPEX Rings sold separately.
Part No.
Part Description
Pkg. Qty.
Case Qty.
Q4585050
Q4587575
List Price/Ea.
ProPEX Brass to PB Coupling, 56O" PEX x 56O" PB
25
100
$5.00
ProPEX Brass to PB Coupling, 6M" PEX x 6M" PB
25
100
$8.90
ProPEX EP Elbow makes tight 90-degree connections for Uponor PEX tubing in supply and return mains.
ProPEX EP Elbow
Note: ProPEX Tool is required. ProPEX Rings sold separately.
Part No.
Part Description
Pkg. Qty.
Case Qty.
Q4760500
Q4760750
List Price/Ea.
ProPEX EP Elbow, 56O" PEX x 56O" PEX
25
100
$1.60
ProPEX EP Elbow, 6M" PEX x 6M" PEX
25
100
$1.95
Q4761000
ProPEX EP Elbow, 1" PEX x 1" PEX
10
100
$4.10
Q4761250
ProPEX EP Elbow, 156M" PEX x 156M" PEX
10
100
$10.60
Q4761500
ProPEX EP Elbow, 156O" PEX x 156O" PEX
10
100
$13.45
Q4762000
ProPEX EP Elbow, 2" PEX x 2" PEX
5
-
$82.20
plastic alternate available in EP section.
* Engineered
Discontinued item; available while quantities last. Please contact Uponor Customer Service for availability. All sales are final.
www.uponor-usa.com
(800) 321-4739
Radiant Heating and Cooling Systems
33
Radiant Heating and Cooling Systems
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
ProPEX Brass Elbow makes tight 90-degree connections for Uponor PEX tubing in supply and return mains.
Note: ProPEX Tool is required. ProPEX Rings sold separately.
ProPEX Brass Elbow
*
*
*
*
Part No.
Part Description
Pkg. Qty.
Case Qty.
Q4710500
Q4710625
List Price/Ea.
ProPEX Brass Elbow, 56O" PEX x 56O" PEX
25
100
$4.55
ProPEX Brass Elbow, 6" PEX x 6" PEX
25
100
$8.10
Q4710750
ProPEX Brass Elbow, 6M" PEX x 6M" PEX
25
100
$6.75
Q4711000
ProPEX Brass Elbow, 1" PEX x 1" PEX
10
100
$11.15
Q4712000
ProPEX Brass Elbow, 2" PEX x 2" PEX
5
-
$143.10
ProPEX DZR Brass Elbow makes tight 90-degree connections for Uponor PEX tubing in supply and return
mains. DZR brass is safe for direct burial in soil.
Note: ProPEX Tool is required. ProPEX Rings sold separately.
ProPEX DZR Brass Elbow
Part No.
*
* G4711500
G4711250
Each Qty.
Pkg. Qty.
List Price/Ea.
ProPEX DZR Brass Elbow, 156M" PEX x 156M" PEX
Part Description
-
10
$37.30
ProPEX DZR Brass Elbow, 156O" PEX x 156O" PEX
-
10
$69.10
ProPEX Brass Elbow with MIP makes 90-degree connections for 56O" Uponor PEX tubing to 56O" male
NPT thread.
Note: ProPEX Tool is required. ProPEX Rings sold separately.
ProPEX Brass Elbow
with MIP
Part No.
Q4125050
LF
Part Description
ProPEX Brass Elbow, 56O" PEX x 56O" MIP
Pkg. Qty.
Case Qty.
25
100
List Price/Ea.
$7.95
ProPEX EP Tee makes diverting connections for Uponor PEX tubing in supply and return mains. Branch size
is listed last in the part description.
Note: ProPEX Tool is required. ProPEX Rings sold separately.
ProPEX EP Tee
Part No.
Part Description
Pkg. Qty.
Case Qty.
Q4755050
ProPEX EP Tee, 56O" PEX x 56O" PEX x 56O" PEX
25
100
List Price/Ea.
$1.60
Q4757575
ProPEX EP Tee, 6M" PEX x 6M" PEX x 6M" PEX
25
100
$2.55
Q4751010
ProPEX EP Tee, 1" PEX x 1" PEX x 1" PEX
10
100
$4.60
Q4751313
ProPEX EP Tee, 156M" PEX x 156M" PEX x 156M" PEX
10
100
$12.00
Q4751515
ProPEX EP Tee, 156O" PEX x 156O" PEX x 156O" PEX
10
100
$16.05
Q4752000
ProPEX EP Tee, 2" PEX x 2" PEX x 2" PEX
5
-
$101.30
ProPEX Brass Tee makes diverting connections for Uponor PEX tubing in supply and return mains. Branch
size is listed last in the part description.
Note: ProPEX Tool is required. ProPEX Rings sold separately.
ProPEX Brass Tee
*
*
*
*
Part No.
Part Description
Pkg. Qty.
Case Qty.
Q4705050
ProPEX Brass Tee, 56O" PEX x 56O" PEX x 56O" PEX
25
100
List Price/Ea.
Q4707575
ProPEX Brass Tee, 6M" PEX x 6M" PEX x 6M" PEX
25
100
$8.95
Q4701010
ProPEX Brass Tee, 1" PEX x 1" PEX x 1" PEX
10
100
$16.70
Q4702000
ProPEX Brass Tee, 2" PEX x 2" PEX x 2" PEX
5
-
$175.05
$5.55
LF Lead-free alternative available in lead-free section.
Engineered plastic alternate available in EP section.
Discontinued item; available while quantities last. Please contact Uponor Customer Service for availability. All sales are final.
*
34
Radiant Heating and Cooling Systems
www.uponor-usa.com
(800) 321-4739
Uponor Radiant Heating and Cooling Systems
ProPEX DZR Brass Tee
Note: ProPEX Tool is required. ProPEX Rings sold separately.
Part No.
3* G4701250
3* G4701500
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
ProPEX DZR Brass Tee, 1Z\v" PEX x 1Z\v" PEX x 1Z\v"
-
10
$62.15
ProPEX DZR Brass Tee, 1Z\x" PEX x 1Z\x" PEX x 1Z\x"
-
10
$59.85
ProPEX EP Reducing Tee makes diverting connections for Uponor PEX tubing in supply and return mains.
Branch size is listed last in the part description.
ProPEX EP Reducing Tee
Note: ProPEX Tool is required. ProPEX Rings sold separately.
Part No.
Part Description
Pkg. Qty.
case Qty.
Radiant heating and cooling systems
ProPEX DZR Brass Tee makes diverting connections for Uponor PEX tubing in supply and return mains.
Branch size is listed last in the part description. DZR brass is safe for direct burial in soil.
List Price/Ea.
Q4755575
ProPEX EP Reducing Tee, Z\x" PEX x Z\x" PEX x C\v" PEX
25
100
$6.25
Q4757555
ProPEX EP Reducing Tee, C\v" PEX x Z\x" PEX x Z\x" PEX
25
100
$2.45
Q4757557
ProPEX EP Reducing Tee, C\v" PEX x Z\x" PEX x C\v" PEX
25
100
$2.45
Q4757550
ProPEX EP Reducing Tee, C\v" PEX x C\v" PEX x Z\x" PEX
25
100
$2.15
Q4757710
ProPEX EP Reducing Tee, C\v" PEX x C\v" PEX x 1" PEX
10
100
$9.30
Q4751775
ProPEX EP Reducing Tee, 1" PEX x C\v" PEX x C\v" PEX
10
100
$4.05
Q4751751
ProPEX EP Reducing Tee, 1" PEX x C\v" PEX x 1" PEX
10
100
$4.85
Q4751150
ProPEX EP Reducing Tee, 1" PEX x 1" PEX x Z\x" PEX
10
100
$4.25
Q4751175
ProPEX EP Reducing Tee, 1" PEX x 1" PEX x C\v" PEX
10
100
$4.65
Q4751317
ProPEX EP Reducing Tee, 1Z\v" PEX x 1" PEX x C\v" PEX
10
100
$9.50
Q4751311
ProPEX EP Reducing Tee, 1Z\v" PEX x 1" PEX x 1" PEX
10
100
$11.10
Q4751337
ProPEX EP Reducing Tee, 1Z\v" PEX x 1Z\v" PEX x C\v" PEX
10
100
$11.15
Q4751331
ProPEX EP Reducing Tee, 1Z\v" PEX x 1Z\v" PEX x 1" PEX
10
100
$11.50
Q4751517
ProPEX EP Reducing Tee, 1Z\x" PEX x 1" PEX x C\v" PEX
10
100
$13.35
Q4751511
ProPEX EP Reducing Tee, 1Z\x" PEX x 1" PEX x 1" PEX
10
100
$13.35
Q4751531
ProPEX EP Reducing Tee, 1½" PEX x 1Z\v" PEX x 1" PEX
10
100
$15.80
Q4751533
ProPEX EP Reducing Tee, 1½" PEX x 1Z\v" PEX x 1Z\v" PEX
10
100
$16.80
Q4751537
ProPEX EP Reducing Tee, 1½" PEX x 1Z\v" PEX x C\v" PEX
10
100
$15.25
Q4751557
ProPEX EP Reducing Tee, 1Z\x" PEX x 1Z\x" PEX x C\v" PEX
10
100
$14.35
Q4751551
ProPEX EP Reducing Tee, 1Z\x" PEX x 1Z\x" PEX x 1" PEX
10
100
$14.75
Q4751553
ProPEX EP Reducing Tee, 1Z\x" PEX x 1Z\x" PEX x 1Z\v" PEX
10
100
$15.15
Q4752051
ProPEX EP Reducing Tee, 2" PEX x 1½" PEX x 1" PEX
5
-
$77.80
Q4752210
ProPEX EP Reducing Tee, 2" PEX x 2" PEX x 1" PEX
5
-
$83.45
Q4752215
ProPEX EP Reducing Tee, 2" PEX x 2" PEX x 1½" PEX
5
-
$98.25
Q4752275
ProPEX EP Reducing Tee, 2" PEX x 2" PEX x ¾" PEX
5
-
$85.10
plastic alternate available in EP section.
* Engineered
Discontinued item; available while quantities last. Please contact Uponor Customer Service for availability. All sales are final.
3
www.uponor-usa.com
(800) 321-4739
Radiant heating and cooling systems
35
Radiant heating and cooling systems
Uponor Radiant Heating and Cooling Systems
ProPEX Brass Reducing Tee makes diverting connections for Uponor PEX tubing in supply and return
mains. Branch size is listed last in the part description.
ProPEX Brass Reducing Tee
Note: ProPEX Tool is required. ProPEX Rings sold separately.
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Part No.
Part Description
Q4705575
ProPEX Brass Reducing Tee, Z\x" PEX x Z\x" PEX x C\v" PEX
Pkg. Qty.
case Qty.
25
100
List Price/Ea.
$9.40
Q4707555
ProPEX Brass Reducing Tee, C\v" PEX x Z\x" PEX x Z\x" PEX
25
100
$9.45
Q4707557
ProPEX Brass Reducing Tee, C\v" PEX x Z\x" PEX x C\v" PEX
25
100
$8.95
Q4707550
ProPEX Brass Reducing Tee, C\v" PEX x C\v" PEX x Z\x" PEX
25
100
$8.85
Q4707710
ProPEX Brass Reducing Tee, C\v" PEX x C\v" PEX x 1" PEX
10
100
$14.30
Q4701775
ProPEX Brass Reducing Tee, 1" PEX x C\v" PEX x C\v" PEX
10
100
$16.70
Q4701751
ProPEX Brass Reducing Tee, 1" PEX x C\v" PEX x 1" PEX
10
100
$16.70
Q4701150
ProPEX Brass Reducing Tee, 1" PEX x 1" PEX x Z\x" PEX
10
100
$16.70
Q4701175
ProPEX Brass Reducing Tee, 1" PEX x 1" PEX x C\v" PEX
10
100
$16.70
Q4702575
ProPEX Brass Reducing Tee, 2" PEX x 1Z\x" PEX x C\v" PEX
5
-
$148.70
Q4702051
ProPEX Brass Reducing Tee, 2" PEX x 1Z\x" PEX x 1" PEX
5
-
$142.95
Q4702053
ProPEX Brass Reducing Tee, 2" PEX x 1Z\x" PEX x 1Z\v" PEX
5
-
$168.45
Q4702055
ProPEX Brass Reducing Tee, 2" PEX x 1Z\x" PEX x 1Z\x" PEX
5
-
$180.20
Q4702275
ProPEX Brass Reducing Tee, 2" PEX x 2" PEX x C\v" PEX
5
-
$148.70
Q4702210
ProPEX Brass Reducing Tee, 2" PEX x 2" PEX x 1" PEX
5
-
$148.45
Q4702213
ProPEX Brass Reducing Tee, 2" PEX x 2" PEX x 1Z\v" PEX
5
-
$161.10
Q4702215
ProPEX Brass Reducing Tee, 2" PEX x 2" PEX x 1Z\x" PEX
5
-
$170.80
ProPEX DZR Brass Reducing Tee makes diverting connections for Uponor PEX tubing in supply and return
mains. Branch size is listed last in the part description. DZR Brass Fittings are safe for direct burial in soil.
ProPEX DZR Brass
Reducing Tee
Note: ProPEX Tool is required. ProPEX Rings sold separately.
Part No.
3*
3* G4701311
3* G4701337
3* G4701331
3 G4701537
3 G4701531
3 G4701533
3 G4701557
3 G4701551
3 G4701553
G4701317
Part Description
ProPEX DZR Brass Reducing Tee, 1Z\v" PEX x 1" PEX x C\v" PEX
Each Qty.
Pkg. Qty.
List Price/Ea.
-
10
$62.20
ProPEX DZR Brass Reducing Tee, 1Z\v" PEX x 1" PEX x 1" PEX
-
10
$63.05
ProPEX DZR Brass Reducing Tee, 1Z\v" PEX x 1Z\v" PEX x C\v" PEX
-
10
$44.05
ProPEX DZR Brass Reducing Tee, 1Z\v" PEX x 1Z\v" PEX x 1" PEX
-
10
$44.40
ProPEX DZR Brass Reducing Tee, 1Z\x" PEX x 1Z\v" PEX x C\v" PEX
-
10
$81.05
ProPEX DZR Brass Reducing Tee, 1Z\x" PEX x 1Z\v" PEX x 1" PEX
-
10
$79.80
ProPEX DZR Brass Reducing Tee, 1Z\x" PEX x 1Z\v" PEX x 1Z\v" PEX
-
10
$83.85
ProPEX DZR Brass Reducing Tee, 1Z\x" PEX x 1Z\x" PEX x C\v" PEX
-
10
$86.45
ProPEX DZR Brass Reducing Tee, 1Z\x" PEX x 1Z\x" PEX x 1" PEX
-
10
$80.75
ProPEX DZR Brass Reducing Tee, 1Z\x" PEX x 1Z\x" PEX x 1Z\v" PEX
-
10
$100.05
plastic alternate available in EP section.
* Engineered
Discontinued item; available while quantities last. Please contact Uponor Customer Service for availability. All sales are final.
3
36
Radiant heating and cooling systems
www.uponor-usa.com
(800) 321-4739
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
ProPEX Brass Male
Threaded Adapter
Note: ProPEX tool is required. ProPEX Rings sold separately.
Pkg. Qty.
Case Qty.
ProPEX Brass Male Threaded Adapter, 6" PEX x 56O" NPT
25
100
$3.70
ProPEX Brass Male Threaded Adapter, 56O" PEX x 56O" NPT
25
100
$3.00
Q4525075
ProPEX Brass Male Threaded Adapter, 56O" PEX x 6M" NPT
25
100
$5.40
Q4526375
ProPEX Brass Male Threaded Adapter, 6" PEX x 6M" NPT
10
100
$6.25
Q4527575
ProPEX Brass Male Threaded Adapter, 6M" PEX x 6M" NPT
25
100
$5.35
Q4527510
ProPEX Brass Male Threaded Adapter, 6M" PEX x 1" NPT
10
100
$8.90
Q4521075
ProPEX Brass Male Threaded Adapter, 1" PEX x 6M" NPT
10
100
$7.55
Q4521010
ProPEX Brass Male Threaded Adapter, 1" PEX x 1" NPT
10
100
$10.70
Q4522020
ProPEX Brass Male Threaded Adapter, 2" PEX x 2" NPT
5
-
$95.05
LF
Part No.
Part Description
Q4523850
Q4525050
LF
LF
List Price/Ea.
ProPEX DZR Brass Male Threaded Adapter connects Uponor PEX tubing to male NPT threads and are
intended as transition fittings from metal to PEX. DZR Brass Fittings are safe for direct burial in soil.
Radiant Heating and Cooling Systems
ProPEX Brass Male Threaded Adapter connects Uponor PEX tubing to male NPT threads and are intended
as transition fittings from metal to PEX.
ProPEX DZR Brass Male
Threaded Adapter
Note: ProPEX Tool is required. ProPEX Rings sold separately.
Part No.
G4527575
G4521010
G4521313
G4521515
G4522020
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
LF
ProPEX DZR Brass Male Threaded Adapter, 6M" PEX x 6M" NPT
-
10
$12.25
LF
ProPEX DZR Brass Male Threaded Adapter, 1" PEX x 1" NPT
-
10
$17.25
LF
ProPEX DZR Brass Male Threaded Adapter, 156M" PEX x 156M" NPT
-
10
$26.10
ProPEX DZR Brass Male Threaded Adapter, 156O" PEX x 156O" NPT
-
10
$36.10
ProPEX DZR Brass Male Threaded Adapter, 2" PEX x 2" NPT
-
5
$149.70
ProPEX Brass Female Threaded Adapter connects Uponor PEX tubing to female NPT threads and are
intended as transition fittings from metal to PEX.
ProPEX Brass Female
Threaded Adapter
Note: ProPEX Tool is required. ProPEX Rings sold separately.
Part No.
Part Description
Pkg. Qty.
Case Qty.
List Price/Ea.
Q4575050
ProPEX Brass Female Threaded Adapter, 56O" PEX x 56O" NPT
25
100
$6.15
Q4575075
ProPEX Brass Female Threaded Adapter, 56O" PEX x 6M" NPT
25
100
$6.75
Q4576375
ProPEX Brass Female Threaded Adapter, 6" PEX x 6M" NPT
10
100
$7.90
Q4577575
LF
ProPEX Brass Female Threaded Adapter, 6M" PEX x 6M" NPT
25
100
$6.90
Q4577510
ProPEX Brass Female Threaded Adapter, 6M" PEX x 1" NPT
10
100
$16.05
Q4571075
ProPEX Brass Female Threaded Adapter, 1" PEX x 6M" NPT
10
100
$11.75
Q4571010
ProPEX Brass Female Threaded Adapter, 1" PEX x 1" NPT
10
100
$14.60
Q4572020
ProPEX Brass Female Threaded Adapter, 2" PEX x 2" NPT
5
-
$160.75
LF
LF
LF Lead-free alternative available in lead-free section.
Discontinued item; available while quantities last. Please contact Uponor Customer Service for availability. All sales are final.
www.uponor-usa.com
(800) 321-4739
Radiant Heating and Cooling Systems
37
Radiant Heating and Cooling Systems
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
ProPEX DZR Brass Female Threaded Adapter connects Uponor PEX tubing to female NPT threads and is
intended as a transition fitting from metal to PEX. DZR Brass Fittings are safe for direct burial in soil.
ProPEX DZR Brass Female
Threaded Adapter
Note: ProPEX Tool is required. ProPEX Rings sold separately.
Part No.
G4577575
G4571010
G4571313
G4571515
LF
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
-
10
$15.65
ProPEX DZR Brass Female Threaded Adapter, 6M" PEX x 6M" NPT
LF
ProPEX DZR Brass Female Threaded Adapter, 1" PEX x 1" NPT
-
10
$17.80
LF
ProPEX DZR Brass Female Threaded Adapter, 156M" PEX x 156M" NPT
-
10
$40.95
ProPEX DZR Brass Female Threaded Adapter, 156O" PEX x 156O" NPT
-
10
$48.45
List Price/Ea.
ProPEX Brass Sweat Adapter transitions Uponor PEX tubing to copper pipe.
ProPEX Brass Sweat Adapter
Note: ProPEX Tool is required. ProPEX Rings sold separately.
Part No.
Part Description
Pkg. Qty.
Case Qty.
Q4513850
ProPEX Brass Sweat Adapter, 6" PEX x 56O" Copper
25
100
$3.15
ProPEX Brass Sweat Adapter, 56O" PEX x 56O" Copper
25
100
$2.15
Q4515050
Q4515075
LF
ProPEX Brass Sweat Adapter, 56O" PEX x 6M" Copper
25
100
$4.25
Q4516350
ProPEX Brass Sweat Adapter, 6" PEX x 56O" Copper
10
100
$4.45
Q4516375
ProPEX Brass Sweat Adapter, 6" PEX x 6M" Copper
10
100
$4.90
Q4517550
ProPEX Brass Sweat Adapter, 6M" PEX x 56O" Copper
25
100
$4.70
Q4517575
ProPEX Brass Sweat Adapter, 6M" PEX x 6M" Copper
25
100
$4.90
ProPEX Brass Sweat Adapter, 6M" PEX x 1" Copper
10
100
$7.45
Q4511010
ProPEX Brass Sweat Adapter, 1" PEX x 1" Copper
10
100
$7.60
Q4512020
ProPEX Brass Sweat Adapter, 2" PEX x 2" Copper
5
-
$78.85
LF
LF
Q4517510
LF
ProPEX DZR Brass Sweat Adapter transitions Uponor PEX tubing to copper pipe. DZR Brass Fittings are
safe for direct burial in the soil.
ProPEX DZR Brass
Sweat Adapter
Note: ProPEX Tool is required. ProPEX Rings sold separately.
Part No.
G4517575
G4511010
G4511313
G4511515
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
LF
ProPEX DZR Brass Sweat Adapter, 6M" PEX x 6M" Copper
-
10
$10.90
LF
ProPEX DZR Brass Sweat Adapter, 1" PEX x 1" Copper
-
10
$14.45
LF
ProPEX DZR Brass Sweat Adapter, 156M" PEX x 156M" Copper
-
10
$22.65
ProPEX DZR Brass Sweat Adapter, 156O" PEX x 156O" Copper
-
10
$32.55
LF Lead-free alternative available in lead-free section.
Discontinued item; available while quantities last. Please contact Uponor Customer Service for availability. All sales are final.
38
Radiant Heating and Cooling Systems
www.uponor-usa.com
(800) 321-4739
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
ProPEX Brass
Fitting Adapter
Note: ProPEX Tool is required. ProPEX Rings sold separately.
Part No.
Part Description
Pkg. Qty.
Case Qty.
Q4503850
ProPEX Brass Fitting Adapter, 6" PEX x 56O" Copper
25
100
$2.95
LF
ProPEX Brass Fitting Adapter, 56O" PEX x 56O" Copper
25
100
$2.10
LF
ProPEX Brass Fitting Adapter, 56O" PEX x 6M" Copper
25
100
$3.60
Q4506350
ProPEX Brass Fitting Adapter, 6" PEX x 56O" Copper
10
100
$4.40
Q4506375
ProPEX Brass Fitting Adapter, 6" PEX x 6M" Copper
10
100
$4.45
Q4507550
ProPEX Brass Fitting Adapter, 6M" PEX x 56O" Copper
25
100
$4.20
Q4507575
ProPEX Brass Fitting Adapter, 6M" PEX x 6M" Copper
25
100
$4.50
ProPEX Brass Fitting Adapter, 6M" PEX x 1" Copper
10
100
$5.50
Q4501010
ProPEX Brass Fitting Adapter, 1" PEX x 1" Copper
10
100
$8.10
Q4502020
ProPEX Brass Fitting Adapter, 2" PEX x 2" Copper
5
-
$70.10
Q4505050
Q4505075
LF
Q4507510
LF
List Price/Ea.
ProPEX DZR Brass Fitting Adapter transitions Uponor PEX tubing to copper fittings. DZR Brass Fittings are
safe for direct burial in soil.
Radiant Heating and Cooling Systems
ProPEX Brass Fitting Adapter transitions Uponor PEX tubing to copper fittings.
ProPEX DZR Brass
Fitting Adapter
Note: ProPEX Tool is required. ProPEX Rings sold separately.
Part No.
G4501313
G4501515
LF
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
ProPEX DZR Brass Fitting Adapter, 156M" PEX x 156M" Copper
-
10
$19.95
ProPEX DZR Brass Fitting Adapter, 156O" PEX x 156O" Copper
-
10
$32.95
ProPEX EP Plug permanently terminates the end of Uponor PEX tubing.
ProPEX EP Plug
Note: ProPEX tool is required. ProPEX Rings sold separately.
Part No.
Part Description
Pkg. Qty.
Case Qty.
Q4350500
Q4350750
List Price/Ea.
ProPEX EP Plug for 56O" PEX
25
100
$1.05
ProPEX EP Plug for 6M" PEX
25
100
$1.40
Q4351000
ProPEX EP Plug for 1" PEX
10
100
$2.20
Q4351250
ProPEX EP Plug for 156M" PEX
10
100
$12.30
Q4351500
ProPEX EP Plug for 156O" PEX
10
100
$18.90
Q4352000
ProPEX EP Plug for 2" PEX
5
-
$32.75
LF Lead-free alternative available in lead-free section.
Discontinued item; available while quantities last. Please contact Uponor Customer Service for availability. All sales are final.
www.uponor-usa.com
(800) 321-4739
Radiant Heating and Cooling Systems
39
Radiant Heating and Cooling Systems
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
ProPEX Brass Plug temporarily or permanently terminates the end of Uponor PEX tubing.
ProPEX Brass Plug
Note: ProPEX Tool is required. ProPEX Rings sold separately.
Part No.
Part Description
Pkg. Qty.
Case Qty.
Q4533838
ProPEX Brass Plug for 6" PEX
25
100
$2.60
* Q4535050
ProPEX Brass Plug for 56O" PEX
25
100
$1.85
Q4536363
ProPEX Brass Plug for 6" PEX
10
100
$3.85
ProPEX Brass Plug for 6M" PEX
25
100
$3.65
ProPEX Brass Plug for 1" PEX
10
100
$8.55
ProPEX Brass Plug for 2" PEX
5
-
$98.05
* Q4537575
* Q4531000
* Q4532000
List Price/Ea.
Tubing Transition Fittings
QS-style Coupling Nipple
QS-style Conversion Nipple
The QS-style Coupling Nipple (brass) and the appropriate fitting assembly connect 6QE", 6", 56O", 6" or 6M"
Uponor tubing together.
Part No.
Part Description
Each Qty.
Pkg. Qty.
A4322020
A4322525
List Price/Ea.
QS-style Coupling Nipple, R20 x R20
-
10
$7.70
QS-style Coupling Nipple, R25 x R25 (for 6M" tubing only)
-
10
$14.95
The QS-style Conversion Nipple (brass) and the appropriate fitting connect 6QE", 6", 56O", 6" or 6M" Uponor
tubing to 56O", 6M" and 1" NPT.
QS-style Copper Adapter
Part No.
Part Description
A4322050
QS-style Conversion Nipple, R20 x 56O" NPT
Each Qty.
Pkg. Qty.
-
10
List Price/Ea.
$8.20
A4322075
QS-style Conversion Nipple, R20 x 6M" NPT
-
10
$7.85
A4322575
QS-style Conversion Nipple, R25 x 6M" NPT (for 6M" tubing only)
-
10
$10.75
A4322510
QS-style Conversion Nipple, R25 x 1" NPT, (for 6M" tubing only)
-
10
$15.05
Use R20 QS-style Copper Adapter (R20 or R25) and appropriate QS-style Fitting Assembly to transition
Uponor PEX tubing to 56O" and 6M" copper pipe.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A4332050
QS-style Copper Adapter, R20 x 56O" Copper
-
10
$6.40
A4332075
QS-style Copper Adapter, R20 x 6M" Copper
-
10
$6.15
A4332575
QS-style Copper Adapter, R25 x 6M" Copper (for 6M" tubing only)
-
10
$11.45
plastic alternate available in EP section.
* Engineered
Discontinued item; available while quantities last. Please contact Uponor Customer Service for availability. All sales are final.
40
Radiant Heating and Cooling Systems
www.uponor-usa.com
(800) 321-4739
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
Part No.
Part Description
Each Qty.
Pkg. Qty.
QS-style Copper
Fitting Adapter
List Price/Ea.
A4342050
QS-style Copper Fitting Adapter, R20 x 56O" Copper
-
10
$7.35
A4342075
QS-style Copper Fitting Adapter, R20 x 6M" Copper
-
10
$7.00
A4342575
QS-style Copper Fitting Adapter, R25 X 6M" Copper
(for 6M" tubing only)
-
10
$19.55
A4342510
QS-style Copper Fitting Adapter, R25 X 1" Copper
(for 6M" tubing only)
-
10
$11.35
Use 6QE" Repair Coupling to connect 6QE" Wirsbo hePEX tubing together.
Radiant Heating and Cooling Systems
Use R20 QS-style Copper Fitting Adapter and appropriate QS-style Fitting Assembly to transition Uponor
PEX tubing to 56O" and 6M" copper fittings.
Repair Coupling
Note: One-piece Repair Coupling comes as an assembly. No other fittings are necessary.
Part No.
Part Description
A4010313
6QE" Repair Coupling
Each Qty.
Pkg. Qty.
List Price/Ea.
-
10
$24.95
Note: For all other sizes of tubing, see ProPEX EP Coupling section on pages 32-33. EP Couplings are
suitable for direct burial.
Baseboard Fittings
QS-style Baseboard Elbow (brass) connects 56O", 6" and 6M" Uponor PEX tubing to 6M-inch copper
baseboard with the appropriate QS-style fitting assembly.
QS-style Baseboard Elbow
and Tee
Note: QS-style Fitting Assembly is required.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A4382075
QS-style Baseboard Elbow, R20 X 6M" Copper Adapter
-
10
$12.45
A4372075
QS-style Baseboard Elbow, R20 x 6M" Copper Fitting Adapter
-
10
$18.40
QS-style Baseboard Tee (brass) connects 56O" and 6" Uponor PEX tubing to 6M-inch copper baseboard
(includes 56-inch threads for air vent).
Part No.
Part Description
A4392075
QS-style Baseboard Tee, R20 x 6M" Copper Adapter
www.uponor-usa.com
(800) 321-4739
Each Qty.
Pkg. Qty.
List Price/Ea.
-
10
$19.55
Radiant Heating and Cooling Systems
41
Radiant Heating and Cooling Systems
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
ProPEX Baseboard Elbow
and Tee
ProPEX Baseboard Elbow (brass) connects 56O", 6" and 6M" Uponor PEX tubing products to 6M"
copper baseboard.
Note: ProPEX Tool is required. ProPEX Rings sold separately.
Part No.
Part Description
Q4385075
ProPEX Baseboard Elbow, 56O" PEX x 6M" Copper Adapter
Each Qty.
Pkg. Qty.
-
10
List Price/Ea.
$13.40
Q4386375
ProPEX Baseboard Elbow, 6" PEX x 6M" Copper Adapter
-
10
$13.40
Q4387575
ProPEX Baseboard Elbow, 6M" PEX x 6M" Copper Adapter
-
10
$14.25
Q4375075
ProPEX Baseboard Elbow, 56O" PEX x 6M" Copper Fitting Adapter
-
10
$14.25
Q4376375
ProPEX Baseboard Elbow, 6" PEX x 6M" Copper Fitting Adapter
-
10
$14.25
Q4377575
ProPEX Baseboard Elbow, 6M" PEX x 6M" Copper Fitting Adapter
-
10
$14.90
ProPEX Baseboard Tee (brass) connects 56O" and 6" Uponor PEX tubing products to 6M" copper baseboard
(includes 56-inch threads for air vent). Air vent is not included.
Part No.
Part Description
Q4395075
ProPEX Baseboard Tee, 56O" PEX x 6M" Copper Adapter
Each Qty.
Pkg. Qty.
List Price/Ea.
-
10
$14.90
Q4396375
ProPEX Baseboard Tee, 6" PEX x 6M" Copper Adapter
-
10
$15.65
Q4397575
ProPEX Baseboard Tee, 6M" PEX x 6M" Copper Adapter
-
10
$16.25
Each Qty.
Pkg. Qty.
List Price/Ea.
MLC Press Fittings
MLC Press Fitting
Brass Coupling
MLC Press Fitting Brass Coupling connects two pieces of MLC tubing.
Note: The Mini-Press Battery Tool or MLC Press Fitting Manual Tool is required.
Part No.
MLC Press Fitting
Brass Elbow
D4545050
MLC Press Fitting Brass Coupling, 56O" MLC Tubing x 56O" MLC Tubing
-
10
$6.45
D4546363
MLC Press Fitting Brass Coupling, 6" MLC Tubing x 6" MLC Tubing
-
10
$15.20
D4547575
MLC Press Fitting Brass Coupling, 6M" MLC Tubing x 6M" MLC Tubing
-
10
$16.05
D4541010
MLC Press Fitting Brass Coupling, 1" MLC Tubing x 1" MLC Tubing
-
10
$19.75
Pkg. Qty.
List Price/Ea.
MLC Press Fitting Elbow makes 90-degree connections for MLC tubing.
Note: The Mini-Press Battery Tool or MLC Press Fitting Manual Tool is required.
Part No.
42
Radiant Heating and Cooling Systems
Part Description
Part Description
Each Qty.
D4710625
MLC Press Fitting Brass Elbow, 6" MLC Tubing x 6" MLC Tubing
-
10
$10.05
D4710750
MLC Press Fitting Brass Elbow, 6M" MLC Tubing x 6M" MLC Tubing
-
10
$13.50
D4711000
MLC Press Fitting Brass Elbow, 1" MLC Tubing x 1" MLC Tubing
-
10
$18.80
www.uponor-usa.com
(800) 321-4739
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
MLC Press Fitting Brass Tee
Note: The Mini-Press Battery Tool or MLC Press Fitting Manual Tool is required.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
D4707575
MLC Press Fitting Brass Tee,
6M" MLC Tubing x 6M" MLC Tubing x 6M" MLC Tubing
-
10
$26.60
D4701010
MLC Press Fitting Brass Tee,
1" MLC Tubing x 1" MLC Tubing x 1" MLC Tubing
-
10
$31.55
D4707550
MLC Press Fitting Brass Reducing Tee,
6M" MLC Tubing x 6M" MLC Tubing x 56O" MLC Tubing
-
10
$26.60
D4701150
MLC Press Fitting Brass Reducing Tee,
1" MLC Tubing x 1" MLC Tubing x 56O" MLC Tubing
-
10
$31.55
D4701175
MLC Press Fitting Brass Reducing Tee,
1" MLC Tubing x 1" MLC Tubing x 6M" MLC Tubing
-
10
$31.55
MLC Press Fitting Brass Male NPT Threaded Adapter connects MLC tubing to male NPT threads.
MLC Press Fitting Brass
Male Threaded Adapter
Note: The Mini-Press Battery Tool or MLC Press Fitting Manual Tool is required.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
D4525075
MLC Press Fitting Brass Male Threaded Adapter,
56O" MLC Tubing x 6M" NPT
-
10
$16.50
D4526375
MLC Press Fitting Brass Male Threaded Adapter,
6" MLC Tubing x 6M" NPT
-
10
$17.65
D4527575
MLC Press Fitting Brass Male Threaded Adapter,
6M" MLC Tubing x 6M" NPT
-
10
$19.90
D4527510
MLC Press Fitting Brass Male Threaded Adapter,
6M" MLC Tubing x 1" NPT
-
10
$23.25
D4521010
MLC Press Fitting Brass Male Threaded Adapter,
1" MLC Tubing x 1" NPT
-
10
$27.45
MLC Press Fitting Brass Female NPT Threaded Adapter connects MLC tubing to female NPT threads.
Note: The Mini-Press Battery Tool or MLC Press Fitting Manual Tool is required.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
D4575075
MLC Press Fitting Brass Female Threaded Adapter,
56O" MLC Tubing x 6M" NPT
-
10
$14.95
D4576375
MLC Press Fitting Brass Female Threaded Adapter,
6" MLC Tubing x 6M" NPT
-
10
$16.05
D4577575
MLC Press Fitting Brass Female Threaded Adapter,
6M" MLC Tubing x 6M" NPT
-
10
$18.15
D4577510
MLC Press Fitting Brass Female Threaded Adapter,
6M" MLC Tubing x 1" NPT
-
10
$24.85
D4571010
MLC Press Fitting Brass Female Threaded Adapter,
1" MLC Tubing x 1" NPT
-
10
$34.85
www.uponor-usa.com
(800) 321-4739
Radiant Heating and Cooling Systems
MLC Press Fitting Brass Tee makes diverting connections for MLC tubing in supply and return mains.
MLC Press Fitting Brass
Female Threaded Adapter
Radiant Heating and Cooling Systems
43
Radiant Heating and Cooling Systems
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
MLC Press Fitting Brass
Sweat Adapter
MLC Press Fitting Brass Sweat Adapter transitions MLC tubing to copper pipe. Fittings come disassembled
for sweating.
Note: The Mini-Press Battery Tool or MLC Press Fitting Manual Tool is required.
MLC Press Fitting Brass
Fitting Adapter
Part No.
Part Description
Each Qty.
D4515050
MLC Press Fitting Brass Sweat Adapter, 56O" MLC Tubing x 56O" Copper
-
Pkg. Qty. List Price/Ea.
10
$13.60
D4515075
MLC Press Fitting Brass Sweat Adapter, 56O" MLC Tubing x 6M" Copper
-
10
$9.40
D4516375
MLC Press Fitting Brass Sweat Adapter, 6" MLC Tubing x 6M" Copper
-
10
$17.55
D4517575
MLC Press Fitting Brass Sweat Adapter, 6M" MLC Tubing x 6M" Copper
-
10
$13.35
D4517510
MLC Press Fitting Brass Sweat Adapter, 6M" MLC Tubing x 1" Copper
-
10
$17.10
D4511010
MLC Press Fitting Brass Sweat Adapter, 1" MLC Tubing x 1" Copper
-
10
$18.65
MLC Press Fitting Brass Fitting Adapter transitions MLC tubing to copper fittings. Fittings come
disassembled for sweating.
Note: The Mini-Press Battery Tool or MLC Press Fitting Manual Tool is required.
Part No.
MLC Press Fitting
Manifold Adapter
44
Radiant Heating and Cooling Systems
Part Description
Each Qty.
Pkg. Qty. List Price/Ea.
D4505050
MLC Press Fitting Brass Fitting Adapter, 56O" MLC Tubing x 56O" Copper
-
10
$20.10
D4505075
MLC Press Fitting Brass Fitting Adapter, 56O" MLC Tubing x 6M" Copper
-
10
$10.30
D4506375
MLC Press Fitting Brass Fitting Adapter, 6" MLC Tubing x 6M" Copper
-
10
$9.60
D4507575
MLC Press Fitting Brass Fitting Adapter, 6M" MLC Tubing x 6M" Copper
-
10
$13.40
D4507510
MLC Press Fitting Brass Fitting Adapter, 6M" MLC Tubing x 1" Copper
-
10
$26.80
D4501010
MLC Press Fitting Brass Fitting Adapter, 1" MLC Tubing x 1" Copper
-
10
$18.85
MLC Press Fitting Manifold Adapter transitions R32 manifold connections to 6", 6M" and 1" MLC tubing.
Note: The Mini-Press Battery Tool or MLC Press Fitting Manual Tool is required.
Part No.
Part Description
D4143263
MLC Press Fitting Manifold Straight Adapter, R32 x 6" MLC
Each Qty.
Pkg. Qty.
List Price/Ea.
-
10
$26.65
D4143275
MLC Press Fitting Manifold Straight Adapter, R32 x 6M" MLC
-
10
$26.65
D4143210
MLC Press Fitting Manifold Straight Adapter, R32 x 1" MLC
-
10
$26.65
D4153263
MLC Press Fitting Manifold Elbow Adapter, R32 x 6" MLC
-
10
$27.65
D4153275
MLC Press Fitting Manifold Elbow Adapter, R32 x 6M" MLC
-
10
$27.65
D4153210
MLC Press Fitting Manifold Elbow Adapter, R32 x 1" MLC
-
10
$27.65
www.uponor-usa.com
(800) 321-4739
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
MLC Press Fitting Baseboard
Elbow and Tee
Note: The Mini-Press Battery Tool or MLC Press Fitting Manual Tool is required.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
D4385075
MLC Press Fitting Baseboard Elbow,
56O" MLC Tubing x 6M" Copper Adapter
-
10
$21.70
D4386375
MLC Press Fitting Baseboard Elbow,
6" MLC Tubing x 6M" Copper Adapter
-
10
$21.70
D4387575
MLC Press Fitting Baseboard Elbow,
6M" MLC Tubing x 6M" Copper Adapter
-
10
$21.70
D4375075
MLC Press Fitting Baseboard Elbow,
56O" MLC Tubing x 6M" Copper Fitting Adapter
-
10
$21.05
D4376375
MLC Press Fitting Baseboard Elbow,
6" MLC Tubing x 6M" Copper Fitting Adapter
-
10
$21.05
D4377575
MLC Press Fitting Baseboard Elbow,
6M" MLC Tubing x 6M" Copper Fitting Adapter
-
10
$21.05
Radiant Heating and Cooling Systems
MLC Press Fitting Baseboard Elbow connects 56O", 6" and 6M" MLC tubing to 6M-inch copper baseboard.
Fittings come disassembled for sweating.
The MLC Press Fitting Baseboard Tee connects 56O" and 6" MLC tubing to 6M-inch copper baseboard. Tee
features 56-inch thread for air vent. Fittings come disassembled for soldering.
Part No.
Part Description
Each Qty. Pkg. Qty. List Price/Ea.
D4395075
MLC Press Fitting Baseboard Tee, 56O" MLC Tubing x 6M" Copper Adapter
-
10
$22.00
D4396375
MLC Press Fitting Baseboard Tee, 6" MLC Tubing x 6M" Copper Adapter
-
10
$22.00
Heat-transfer Panels and Plates
The 56O" x 4' feet plywood panels are attached to an aluminum heat transfer sheet. Use with 6QE" Wirsbo
hePEX tubing only.
Quik Trak¨ Panel
Cut your labor in half with UponorÕs fully assembled set of Quik Trak¨ panels, which consist of six panels
fastened together with strapping tape. The panels are staggered (2 inches) on both ends to aid alignment.
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A5060701
Quik Trak 7" x 48" Panels
-
10
$15.35
A5060761
Quik Trak 7" x 48" x 6 Panels (fully assembled set)
1
-
$102.65
www.uponor-usa.com
(800) 321-4739
Radiant Heating and Cooling Systems
45
Radiant Heating and Cooling Systems
PkjijmM\_d\ioC`\odib\i_>jjgdibNtno`hn
Quik Trak Return Panel
Quik Trak Combo Panel
A5060712
Quik Trak Return Panel is designed with a U-shaped groove to complete tubing turns. Each return panel
is shipped with a separate aluminum sheet for installation beneath the panel. Use with 6QE" Wirsbo hePEX
tubing only.
Part No.
Part Description
A5060702
Quik Trak 7" x 48" Return Panels
Pkg. Qty.
List Price/Ea.
-
10
$22.25
Quik Trak Combo Panel simplifies installations when multiple tubing runs are needed in a tight space back
to the manifold. Each panel is shipped with a separate aluminum sheet for installation beneath the panel.
Use with 6QE" Wirsbo hePEX tubing only.
Part No.
A5060722
Each Qty.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A5060712
Quik Trak 12" x 48" Combo Panel, 6 runs with return
-
5
$37.95
A5060722
Quik Trak 12" x 12" Combo 90, 6 runs
-
5
$10.30
A5060732
Quik Trak 7" x 12" Combo Access Panel, 6 runs with 1 access
-
6
$10.00
A5060732
Joist Trakª Panel
Use Joist Trakª extruded aluminum heat transfer panels with 6" or 56O" Uponor PEX in floor joist
applications. Each panel is 4' x 4", and comes packaged 20 per box. It provides easy installation, increased
heat transfer and superior comfort.
Note: Screws not included.
46
Radiant Heating and Cooling Systems
Part No.
Part Description
Each Qty.
Pkg. Qty.
List Price/Ea.
A5080375
Joist Trak, 6" Heat Transfer Panel
-
20
$11.95
A5080500
Joist Trak, 56O" Heat Transfer Panel
-
20
$11.95
www.uponor-usa.com
(800) 321-4739
Download PDF