Behringer | MIX800 | User manual | Behringer MIX800 User manual

User Manual
MINIMIX MIX800
Ultra-Compact Karaoke Processor with Voice Canceller
and Echo/Reverb Effects
2
MINIMIX MIX800 User Manual
Table of Contents
Thank you................................................................2
Important Safety Instructions...............................3
Legal Disclaimer......................................................3
Limited Warranty....................................................3
1. Introduction........................................................4
1.1 Before you get started...........................................4
1.1.1 Shipment..............................................................4
1.1.2 Initial operation.................................................4
1.1.3 Online registration...........................................4
2. Control Elements and Connections.................4
2.1 The front......................................................................4
2.2 The rear.......................................................................5
3. Application Example.........................................5
4. Specifications.....................................................6
5. Other Mini Products...........................................6
Thank you
Thank you for expressing your confidence in us by purchasing the
MINIMIX MIX800.
3
MINIMIX MIX800 User Manual
Important Safety
Instructions
Terminals marked with this
symbol carry electrical
current of sufficient
magnitude to constitute risk of electric
shock. Use only high-quality professional
speaker cables with ¼" TS or twistlocking plugs pre-installed. All other
installation or modification should be
performed only by qualified personnel.
This symbol, wherever it
appears, alerts you to the
presence of uninsulated
dangerous voltage inside the enclosure voltage that may be sufficient to
constitute a risk of shock.
This symbol, wherever it
appears, alerts you to
important operating and
maintenance instructions in the
accompanying literature. Please read
the manual.
Caution
To reduce the risk of electric
shock, do not remove the
top cover (or the rear section). No user
serviceable parts inside. Refer servicing
to qualified personnel.
Caution
To reduce the risk of fire or
electric shock, do not expose
this appliance to rain and moisture.
The apparatus shall not be exposed to
dripping or splashing liquids and no
objects filled with liquids, such as vases,
shall be placed on the apparatus.
Caution
These service instructions
are for use by qualified
service personnel only. To reduce the
risk of electric shock do not perform any
servicing other than that contained in the
operation instructions. Repairs have to be
performed by qualified service personnel.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose
of the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A groundingtype plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Use only attachments/accessories
specified by the manufacturer.
12. Use only with
the cart, stand,
tripod, bracket,
or table specified by
the manufacturer,
or sold with the
apparatus. When a cart is used, use caution
when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during
lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified
service personnel. Servicing is required
when the apparatus has been damaged
in any way, such as power supply cord or
plug is damaged, liquid has been spilled
or objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
15. The apparatus shall be connected to
a MAINS socket outlet with a protective
earthing connection.
16. Where the MAINS
plug or an appliance
coupler is used as the
disconnect device,
the disconnect device shall
remain readily operable.
LEGAL DISCLAIMER
TECHNICAL SPECIFICATIONS AND
APPEARANCES ARE SUBJECT TO CHANGE
WITHOUT NOTICE AND ACCURACY
IS NOT GUARANTEED. BEHRINGER,
KLARK TEKNIK, MIDAS, BUGERA,
AND TURBOSOUND ARE PART OF THE
MUSIC GROUP (MUSIC-GROUP.COM).
ALL TRADEMARKS ARE THE PROPERTY
OF THEIR RESPECTIVE OWNERS.
MUSIC GROUP ACCEPTS NO LIABILITY
FOR ANY LOSS WHICH MAY BE
SUFFERED BY ANY PERSON WHO RELIES
EITHER WHOLLY OR IN PART UPON
ANY DESCRIPTION, PHOTOGRAPH
OR STATEMENT CONTAINED HEREIN.
COLORS AND SPECIFICATIONS MAY
VARY FROM ACTUAL PRODUCT.
MUSIC GROUP PRODUCTS ARE SOLD
THROUGH AUTHORIZED FULLFILLERS
AND RESELLERS ONLY. FULLFILLERS
AND RESELLERS ARE NOT AGENTS OF
MUSIC GROUP AND HAVE ABSOLUTELY
NO AUTHORITY TO BIND MUSIC GROUP BY
ANY EXPRESS OR IMPLIED UNDERTAKING
OR REPRESENTATION. THIS MANUAL IS
COPYRIGHTED. NO PART OF THIS MANUAL
MAY BE REPRODUCED OR TRANSMITTED
IN ANY FORM OR BY ANY MEANS,
ELECTRONIC OR MECHANICAL, INCLUDING
PHOTOCOPYING AND RECORDING OF
ANY KIND, FOR ANY PURPOSE, WITHOUT
THE EXPRESS WRITTEN PERMISSION OF
MUSIC GROUP IP LTD.
ALL RIGHTS RESERVED.
© 2013 MUSIC Group IP Ltd.
Trident Chambers, Wickhams Cay,
P.O. Box 146, Road Town, Tortola,
British Virgin Islands
LIMITED WARRANTY
For the applicable warranty terms
and conditions and additional
information regarding MUSIC
Group’s Limited Warranty, please
see complete details online at
www.music-group.com/warranty.
4
MINIMIX MIX800 User Manual
1. Introduction
1.1.3 Online registration
Sing along with this powerful karaoke machine! Its revolutionary
Voice Canceller effectively eliminates vocals from any stereo source
while retaining most music elements. The integrated digital
echo/reverb processor in 24-bit/40 kHz resolution assures ultimate
vocal enhancement. We’ve included 2 independent mic channels
with Level controls and Clip indicators for perfect level adjustment.
A dedicated 2-band EQ provides for awesome vocal enhancement
and sound shaping, and there is an accurate 6-digit LED output
meter for precise level indication. Stereo Line Inputs/Outputs let you
connect your favorite CD or MP3 player, tape recorder and similar
equipment. Long-term reliability is guaranteed with the high-quality
potentiometers and illuminated switches. Ultra low-noise audio
operational amplifiers offer outstanding sound performance.
Please register your new BEHRINGER equipment right after your
purchase by visiting http://behringer.com and read the terms and
conditions of our warranty carefully.
Karaoke has never been this easy and this much fun!
Registering your purchase and equipment with us helps us process
your repair claims more quickly and efficiently.
1.1 Before you get started
1.1.1 Shipment
Your MIX800 was carefully packed at the assembly plant to assure
secure transport. Should the condition of the cardboard box
suggest that damage may have taken place, please inspect the unit
immediately and look for physical indications of damage.
◊ Damaged equipment should NEVER be sent directly to us.
Please inform the dealer from whom you acquired the
unit immediately as well as the transportation company
from which you took delivery. Otherwise, all claims for
replacement/repair may be rendered invalid.
Should your BEHRINGER product malfunction, it is our intention
to have it repaired as quickly as possible. To arrange for warranty
service, please contact the BEHRINGER retailer from whom the
equipment was purchased. Should your BEHRINGER dealer not
be located in your vicinity, you may directly contact one of our
subsidiaries. Corresponding contact information is included in
the original equipment packaging (Global Contact Information/
European Contact Information). Should your country not be listed,
please contact the distributor nearest you. A list of distributors can be
found in the support area of our website (http://behringer.com).
Thank you for your cooperation!
2. Control Elements and Connections
◊ Please ensure that the unit is installed and operated only by
people qualified to do so. During installation and operation
the user must have sufficient electrical contact to earth.
Electrostatic discharge may affect the operation of the unit.
2.1 The front
(3)
(5)
(6)
(8)
(2) (4)
(7)
(9)
(10)
(11)
◊ Please always use the original packaging to avoid damage
due to storage or shipping.
◊ Never let unsupervised children play with the MIX800 or
with its packaging.
◊ Please dispose of all packaging materials in an
environmentally friendly fashion.
1.1.2 Initial operation
Be sure that there is enough space around the unit for cooling.
To avoid overheating, do not place the MIX800 on top of power amps
or near radiators, etc.
◊ To power the MIX800, use only the power supply unit that is
delivered with your equipment.
(1)
Fig. 2.1: Front panel control elements and connectors of the MIX800
(1) MIC INPUT 1/2. 1 or 2 microphones can be connected using
these 1/4" jacks.
(2) MIC LEVEL 1/2. The MIC LEVEL control adjusts the level of the
microphone signal.
◊ After they pass the MIC LEVEL controls, the 2 microphone
signals are combined into 1 mono signal.
(3) CLIP. When the Clip LED lights up, distortion may occur in the
microphone input of the MIX800. Reduce the microphone level
with the MIC LEVEL control (2) .
5
MINIMIX MIX800 User Manual
(4) EQ LOW. The EQ LOW control allows you to raise or lower the
low-frequency content of the microphone signal.
(5) EQ HIGH. With the EQ HIGH control, you can raise or lower the
2.2 The rear
(12)
(13)
(14)
(15)
high-frequency content of the microphone signal.
(6) ECHO/REVERB. The MIX800 allows you to add an effect to the
microphone signal. When the ECHO/REVERB button is pressed
in, you can add REVERB to the signal. When the button is
pressed out, the ECHO effect is active.
Fig. 2.2: Rear panel connectors of the MIX800
◊ 1 of the 2 effects is always active! Use the FX LEVEL control
(7) to switch off the effect or to adjust the effect intensity.
(12) Use the 9 V jack to connect the power supply delivered with
(7) FX LEVEL. The FX LEVEL control determines the amount of effect
(13) These connectors are the unbalanced cinch outputs of
that is added to the master signal.
◊ Turn this control fully to the left to switch off the
active effect.
(8) IN/OUT. Press the IN/OUT button to activate the Voice Canceller
in the signal path. This filter circuit allows you to remove the
vocals almost completely from a recording. The filter has been
designed so that vocal frequencies will be processed without
significantly affecting other music signals. What is more,
the filter only works in the center of the stereo panorama,
where vocals are usually positioned in a recording.
the unit.
the MIX800.
(14) These connectors are the unbalanced cinch inputs of
the MIX800.
(15) SERIAL NUMBER.
3. Application Example
The wiring example shown below gives you an idea of how to use
the MIX800.
CD-Player
EUROLIVE B1520 PRO
◊ The Voice Canceller can be used for stereo signals only!
(9) OUTPUT LEVEL. Set the volume of the output signal with the
OUTPUT LEVEL control.
(10) LED DISPLAY. The LED display is for monitoring the input level.
EUROPOWER
EP2000
It comprises 6 LEDs. When the Clip LED lights up, distortion may
occur in the MIX800 output. Reduce the output level with the
OUTPUT LEVEL control (9) .
IN
L
IN
R
(11) � SWITCH. The � switch turns your MINIMIX MIX800 on
and off.
◊ Attention: The � switch does not fully disconnect the
unit from the mains. To disconnect the unit from the
mains, pull out the main cord plug or appliance coupler.
When installing the product, ensure the plug or appliance
coupler is readily operable. Unplug the power cord
completely when the unit is not used for prolonged periods
of time.
XM1800S
Fig. 3.1: Using the MIX800
OUT
L
OUT
R
6
MINIMIX MIX800 User Manual
4. Specifications
5. Other Mini Products
The MINIBEAT belongs to the MINI suite of BEHRINGER products,
which can operate together and are introduced below:
Mic Inputs
Connectors
1/4" stereo jack, balanced
Input impedance
approx. 2 kΩ balanced
Max. input level
-20 dBu
Audio Input
Connectors
Cinch, unbalanced
Input impedance
approx. 20 kΩ
Max. input level
15 dBu
Ultra-compact 9.5" stereo multi-effects processor for studio and
stage applications
• 16 awesome FX presets in 24-bit/48 kHz resolution including
reverb, delay, chorus, flanger, phaser, rotary speaker,
pitch shifter and multi-effects
• Intuitive FX Preset control with LED’s indicating the
selected program
MINIAMP AMP800
Audio Output
Type
RCA connectors, unbalanced
Impedance
approx. 150 Ω
Max. output level
15 dBu
System Data
Ultra-compact 9.5" headphones amplifier system for studio and
stage applications
• 4 totally independent stereo high-power amplifier sections
• Highest sonic quality with virtually all types of headphones
even at maximum volume
MINICOM COM800
Frequency response
10 Hz to 200 kHz, ±0/-2 dB
Dynamics
112 dB, 20 Hz to 20 kHz
THD
0.002% typ. @ 4 dBu
Signal crosstalk
-75 dB @ 1 kHz
Signal-to-noise ratio
97 dBu @ 4 dBu, A-weighted
Ultra-compact 9.5" stereo modeling compressor for studio and
stage applications
• 16 awesome preset models for the most typical compression
applications (vocal, drums, guitar, keyboard, etc.)
• Dedicated Compressor Modeling control with LED’s indicating
the selected dynamics program
MINIMIC MIC800
Power Supply
Mains connection
MINIFEX FEX800
external power supply,
9 V~/750 mA
Mains Voltage
Ultra-compact 9.5" microphone modeling preamp for studio and
stage applications
• High-end preamplifier for all microphone, instrument and
line-level sources. Perfectly complements studio-grade
condenser mics
• Ultra-flexible Preamp Modeling allows you to quickly optimize
your recordings
USA/Canada
120 V~, 60 Hz
U.K./Australia
240 V~, 50 Hz
China
220 V~, 50 Hz
Europe
230 V~, 50 Hz
MINIMON MON800
Japan
100 V~, 50 - 60 Hz
Ultra-compact 9.5" monitor matrix mixer for studio and
stage applications
• Dedicated input section with 4 selectable and mixable
stereo inputs
• Accurate 6-digit LED main stereo output meters for precise
level indication
Power consumption
6W
Dimensions/Weight
Dimensions (H x W x D)
approx. 1.9 x 4.7 x 9.6"
approx. 48 x 120 x 242.6 mm
Weight
approx. 1.34 lbs / 0.61 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these
efforts, modifications may be made from time to time to existing products without prior notice.
Specifications and appearance may differ from those listed or illustrated.
MINIBEAT BEAT800
Ultra-compact 9.5" dual beat counter/phono preamp for studio
and stage applications
• Intelligent dual BPM counters with Tempo Difference indicator
• Ultra-flexible Beat Assist and Sync Lock functions
7
MINIMIX MIX800 User Manual
MINIFBQ FBQ800
Ultra-compact 9.5" graphic equalizer for studio and
stage applications
• Revolutionary FBQ Feedback Detection System instantly reveals
critical frequencies and can also be used as Audio Analyzer
• Additional Low Cut filter removes unwanted frequencies,
e. g. floor rumble
Fig. 5.1: MINI products stack on top of each other
We Hear You
Download PDF