Catalogue Sheet: NEXTN Series

Catalogue Sheet: NEXTN Series
Type:
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
Made in Canada
TYPICAL SPECIFICATIONS
Supply and install the Ready-Lite® NEXTN Series Exit Signs. The equipment shall operate with universal 2-wire
AC input voltage of 120 to 347VAC at less than 1.5W and universal 2-wire DC input voltage from 6 to 24VDC
at less than 1.5W for single and double face signs. The sign shall be suitable for wall, end, or ceiling mount.
The faceplates shall be constructed of steel and shall come standard with knockout chevrons. The frame
shall be of one-piece steel construction. The light source shall be light-emitting diodes (LED). The LED lamps
shall provide illumination in normal and emergency operation and shall be mounted inside the exit housing.
Red LEDs shall be of ALINGAP technology.
An LED-sensitive diffuser shall be mounted behind the legend to provide the 6” high by 3/4” stroke letters
with even illumination.The Exit Sign in a Self-powered configuration shall stay illuminated during emergency
operation for at least 90 minutes upon AC failure.
The Exit Sign shall be CSA-C860 approved and meets CSA 22.2 No.141.
The equipment shall be Ready-Lite® Model:
wall mount
460.0027-RL
end mount
460.0028-RL
ceiling mount
DIMENSIONS
Dimensions are approximate and subject to change.
73/8” [18.7 cm]
7-5/8” [19.2 cm]
8-7/8” [22.4 cm]
4-5/8” [11.7 cm]
12-1/8” [30.7 cm]
2-1/8” [5.3 cm]
13-3/8” [33.9 cm]
POWER CONSUMPTION
MODEL
AC SPECS
All Metal Exit Sign
FEATURES
• Two-wire universal AC input
• Pre-assembled for quick, easy
installation
• Universal mounting – end, wall or
ceiling
• Supplied with two stencil plates, red
diffusing lenses and backplate
• Easy access to wiring entry for all
mounting options
• Canopy mounting system designed
specifically for ease of installation
• Universal, field-selectable chevrons
(knockout)
• Energy efficient – consumes less than
3W in AC or DC mode
• Normal AC and emergency DC
operation – 120 to 347V AC input;
6 to 24V DC input
• Long life energy-efficient ALINGAP
technology LED light source
• Also available with power pack; see
SM-NEXTN catalogue sheet
• CSA certified, meets or exceeds
CSA 22.2 No. 141. requirements
WIRE GUARDS
460.0079-RL
NEXTN SERIES
DC SPECS
AC-only, red
120 to 347VAC
less than 1.5W
-
-
AC/DC standard, red
120 to 347VAC
less than 1.5W
6 to 24VDC
less than 1.5W
AC/special DC, red
120/277/ 347VAC
less than 3W
36 or 48 or 120VDC
less than 2.5W
Self-powered red
120 to 347VAC
less than 3W
nickel-cadmium battery
Min. 60 minutes
AC-only, green
120 to 347VAC
less than 1.5W
-
-
AC/DC standard, green
120 to 347VAC
less than 1.5W
6 to 24VDC
less than 2.5W
self-powered green
120 to 347VAC
less than 3W
nickel-cadmium battery
min. 90 minutes
ORDERING INFORMATION
SERIES
NEXTN= LED exit sign /
universal mount
VOLTAGE
-LU= universal voltage, 120 to 347VAC 6 to 24VDC
-LU00= 120 to 347VAC, no DC**
-LU36= 120/277/347VAC - 36VDC*
-LU48= 120/277/347VAC, 48VDC*
-LU120= 120/347VAC, 120VDC*
-L120-2W= 120VAC, 120VDC 2 wires*
-ISP= self-powered, 120 to 347VAC
*For green legend, consult your sales representative.
** Supplied as single face
COLOUR
OPTIONS
Blank= factory white
BK= black
TA= textured aluminum
G= green legend
TP= tamper-proof screws*
VRTP1= vandal resistant shield with tamper-proof screws,
single face*
VRTP2= vandal resistant shield with tamper-proof screws,
double face*
Other colours available
*990.0119-RL= T
amper-proof bit (sold separately)
EXAMPLE: NEXTN-LU
43
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement