Crestron | CH-HREL8-D6 | Product manual | Crestron CH-HREL8-D6 Product manual

Crestron CH-HREL8-D6
Electrical Control Interface (DIN Rail)
Operation Guide
CH-HREL8-D6
Product Manual
Contents
Description
3
Functional Description…………………………………………………….3
Usage……………………………………………………………………….3
Technical data…………………………………………………………….. 4
Front View…………………………………………………………………. 4
Setup
5
Example wiring diagram…………………………………………………..5
Cresnet connections……………………………………………………… 6
Cresnet ID…………………………………………………………………. 7
Method A viewport………………………………………………….. 7
Method B Toolbox…………………………………………………...8
Programming
9
Configuration Manager........................................................................9
Programming Manager..................................................................... 10
Example Program............................................................................. 10
Problem Solving
11
Troubleshooting.................................................................................11
Futher Inquiries................................................................................. 12
Crestron International • 2 Oude Keerbergsebaan • 2820 Rijmenam • Belgium
Tel: +32 15 50 99 50 • info@crestron-int.be • www.crestron-int.be
2
CH-HREL8-D6
Product Manual
Description
Figure 1: CH-HREL8-D6
Functional Description
The CH-HREL8-D6 is a Cresnet relay interface (Figure 1).
•
•
•
•
•
8 single pole single throw high voltage relays.
Each relay can handle 16Amp at 250V and is protected with a VDR (385 Volts).
Red LED feedback per relay + manual override per relay with dip switches.
Interface connects directly to Cresnet. Two 4-pole Phoenix connectors on board for
easy daisy-chaining of multiple interfaces. Cresnet addressing through software.
DIN rail mountable universal casing to fit in any standard electrical cabinet. Takes 6
DIN modules in the cabinet.
Usage
Typical applications
:
Light switching
HVAC control
DIA – FILM projectors
A/V power control
....
!!! IMPORTANT!!!
Do NOT use the CH-HREL8-D6 for MOTOR control or other inductive loads.
Use the CH-HMOT2-D9 for these types of applications.
Crestron International • 2 Oude Keerbergsebaan • 2820 Rijmenam • Belgium
Tel: +32 15 50 99 50 • info@crestron-int.be • www.crestron-int.be
3
CH-HREL8-D6
Product Manual
Technical data
Dimensions
DIN norm
Cut-out size electrical cabinet
Weight
Color
Material
Mounting
Connectors for relays
Connectors Cresnet / Inputs
Addressing Cresnet
Power
Power consumption
Cresnet Power factor
Crestron Device Library
:
:
:
:
:
:
:
:
:
:
:
:
:
:
106 x 90 x 58 mm ( L x B x H )
6 Modules 106 mm, DIN43880
106 mm x 45 mm (L x H)
320 g
Enclosure, grey RAL7035 , front black
Self-extinguishing NORYL
DIN rail DIN EN 50022
Phoenix 0.2 to 4mm2 cable section
Mini Phoenix 3.5mm
through Crestron viewport or Toolbox
24 VDC, Cresnet
max. 170mA
4W
CNWM-LT9
Relays
:
8 single pole single throw highvoltage
relays 250VAC / 16A
( For RESISTIVE LOADS ONLY!!! ) with
VDR 385V protection per relay.
Status
:
:
1 blue LED for Power status
8 red LED’s for Relay status
Test / Override
:
each relay has a separate override
switch
Includes
:
Interface with 2x 4-pole
Mini-Phoenix connectors
Front view
Figure 2: Front view CH-HREL8-D6
Crestron International • 2 Oude Keerbergsebaan • 2820 Rijmenam • Belgium
Tel: +32 15 50 99 50 • info@crestron-int.be • www.crestron-int.be
4
CH-HREL8-D6
Product Manual
Setup
Example wiring diagram
Figure 3: Connection diagram CH-HREL8-D6
Crestron International • 2 Oude Keerbergsebaan • 2820 Rijmenam • Belgium
Tel: +32 15 50 99 50 • info@crestron-int.be • www.crestron-int.be
5
CH-HREL8-D6
Product Manual
Cresnet Connections
Note: Before making any connections, CRESTRON recommends that all power is off
and the installer reviews the latest revision of the network interconnection drawing
(DOC5411i).
Refer to figure 4 and connect the CH-HREL8-D6 to the Cresnet network via a Cresnet
network cable (CRESNET cable). This cable is not supplied with the CH-HREL8-D6 but
can be obtained from Crestron International.
Figure 4: CH-REL8-D6, Cresnet Hook-up
Crestron International • 2 Oude Keerbergsebaan • 2820 Rijmenam • Belgium
Tel: +32 15 50 99 50 • info@crestron-int.be • www.crestron-int.be
6
CH-HREL8-D6
Product Manual
Cresnet ID
Every equipment and user interface within the network requires a unique identity code
(NET ID). These codes are recognized by a two-digit hexadecimal number from 03 to FE.
The NET ID of each unit must match an ID code specified in the Simpl Windows program.
Use the following method’s to change NET ID of the CH-HREL8-D6.
Method A: (Viewport)
1. Ensure that the CH-HREL8-D6 is connected to the control system.
2. Open the Crestron viewport and connect to the control system (RS-232 or IP)
3. From the viewport menu, select Functions -> Set network ID.
The software checks the network and then opens the “Set Network ID” window.
4. In the “Set Network ID” window, select the CNMW-LT9 from the current network
devices text window (Figure 5).
5. Select the new NET ID for the CH-HREL8-D6 from the choose the new network ID
for the selected device (HEX): text box.
6. Click the Set ID to initiate the change. This will display the “ID command has been
set” window.
7. In the “Command complete” window, click OK.
8. In the current network devices text window, verify the net NET ID code.
9. In the “Set network ID” window, click close.
Figure 5: Set Network ID (viewport)
Crestron International • 2 Oude Keerbergsebaan • 2820 Rijmenam • Belgium
Tel: +32 15 50 99 50 • info@crestron-int.be • www.crestron-int.be
7
CH-HREL8-D6
Product Manual
Method B: (Toolbox)
1. Ensure that the CH-HREL8-D6 is connected to the control system.
2. Open Crestron Toolbox and connect to the control system via
Tools -> Manage Address Book
3 After setting the correct parameters, click OK to return to the Crestron Toolbox
main window.
4 Click Tools | Network Device Tree, or click the network device tree icon to display
the “Network Device Tree” window (Figure 6). Use the Address Book icon or the
drop-down list at the lower left of the window to select the appropriate address for
the devices in the system. Communications are confirmed when the network
devices are displayed.
Figure 6: Network Device Tree (Toolbox)
5 To view a specific device, expand the network device tree by clicking +. Expand the
network device tree until the device to be managed is selected. Right-click the
desired NET ID to open the sub-menu.
Figure 7: Change Network ID (Toolbox)
Crestron International • 2 Oude Keerbergsebaan • 2820 Rijmenam • Belgium
Tel: +32 15 50 99 50 • info@crestron-int.be • www.crestron-int.be
8
CH-HREL8-D6
Product Manual
Programming
The next subsections describe a sample SIMPL Windows program that utilizes a
CH-HREL8-D6. It provides a description of how to actually create the SIMPL Windows
program.
NOTE: The following descriptions assume that the reader has knowledge of SIMPL
Windows. If not, please refer to the extensive help information provided with the software.
Minimal software requirements
SIMPL Windows 2.01.06
Ops. for CNX: 5.12.63X/W
Ops. for “2” series: C2-1014.cuz
*check website www.crestron.com for leatest OPS and software versions*
Configuration manager
A CH-HREL8-D6 needs to be defined as a CNWM-LT9 in Simpl Windows (Figure 8).
Figure 8: Hardware configuration
Crestron International • 2 Oude Keerbergsebaan • 2820 Rijmenam • Belgium
Tel: +32 15 50 99 50 • info@crestron-int.be • www.crestron-int.be
9
CH-HREL8-D6
Product Manual
Programming manager
The CNWM-LT9 symbol has 9 digital press and 9 fb (feedback) signals (Figure 9).
Figure 9: CNMW-LT9 symbol
*The first 8 fb signals (fb1-fb8) represent the 8 relays of the CH-HREL8-D6
The press signals (press1 – press9) are not used by the CH-HREL8-D6.
Example Program
Control a relay
This basic example illustrates how the first relay of a CH-HREL8-D6 can be controlled via
a single press on a button located on a touchpanel or keypad. The toggle symbols keeps
the relay open or closed (Figure 10).
Figure 10: Example program
Crestron International • 2 Oude Keerbergsebaan • 2820 Rijmenam • Belgium
Tel: +32 15 50 99 50 • info@crestron-int.be • www.crestron-int.be
10
CH-HREL8-D6
Product Manual
Problem Solving
Troubleshooting
Table 1 Provides corrective action for possible trouble situations.
If further assistance is required, please contact a Crestron Technical Support
representative or submit your question on the Crestron True Blue On Line Service
(www.crestron.com)
Table 1: Troubleshooting Guide
TROUBLE
POSSIBLE CAUSE(S)
CORRECTIVE ACTION
CH-HREL8-D6 does
not function
CH-HREL8-D6 is not
communicating to the
network.
Enter Viewport in SIMPL
Windows. Press the F4 key
to poll the network. Verify
network connection to CHHREL-D6 (it will report as a
CNWM-LT9).
Crestron swirl on the
front is not lighting up
(blue).
CH-HREL8-D6 is not
receiving 24V power at the
NET connector.
Verify “CRESNET
Connections” on page 6.
Confirm power is supplied to
the unit.
Relay1-8 LED is
always on, relay always
closed, cannot be
controlled by system.
Manual override dipswitches
Relay 1-8 are placed to the
ON position (up).
Verify that the dipswitches
for all the relay’s are placed
to the OFF position (down).
Relay1-8 LED does not
illuminate when control
system sends
commands
Relays 1-8 not driven by
proper signals
Verify that the proper SIMPL
symbols/signals are used to
drive these relays.
CH-HREL8-D6 is not
responding to network
poll
Incorrect network wiring
Verify correct wirings to the
network connectors.
Crestron International • 2 Oude Keerbergsebaan • 2820 Rijmenam • Belgium
Tel: +32 15 50 99 50 • info@crestron-int.be • www.crestron-int.be
11
CH-HREL8-D6
Product Manual
Further Inquiries
If after reviewing this Operations Guide on the CH-HREL8-D6, you cannot locate specific information or
have questions, please take advantage of Crestron's award winning customer service team by calling:
• In Europe, call Crestron International at +32-15-50-99-50.
• In the UK, call Crestron UK at +44-208.439.7272.
• In Germany, call Crestron Germany at +49-731.96.28.10.
• In France, call Crestron France at +33-1-47-91-00-00.
• In Spain, call Crestron Iberica at +34.952.76.82.33
• In the Benelux, call Crestron Benelux at +34-15-50-40-70.
Crestron International • 2 Oude Keerbergsebaan • 2820 Rijmenam • Belgium
Tel: +32 15 50 99 50 • info@crestron-int.be • www.crestron-int.be
12
Download PDF