Samsung | A437 - SGH Cell Phone | User guide | Samsung A437 - SGH Cell Phone User guide

SGH-a437 Series
P O R T A B L E
M O B I L E
Q u a d - B A N D
P H O N E
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the
property of Samsung or its respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or software relating there to (the
“Phone System”), is proprietary to Samsung and protected under federal laws, state
laws, and international treaty provisions. Intellectual Property includes, but is not
limited to, inventions (patentable or unpatentable), patents, trade secrets,
copyrights, software, computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate the rights secured by
the Intellectual Property. Moreover, you agree that you will not (and will not attempt
to) modify, prepare derivative works of, reverse engineer, decompile, disassemble,
or otherwise attempt to create source code from the software. No title to or
ownership in the Intellectual Property is transferred to you. All applicable rights of
the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters:
Customer Care Center:
1301 E. Lookout Drive
1000 Klein St.
Richardson, TX 75082
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
©2007 Samsung Telecommunications America, LLC is a registered trademark of
Samsung Electronics America, Inc. and its related entities.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System
(Automated Response System) at:
www.samsungwireless.com/support
GH68-13351A
Printed in China
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE
PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
A437UCGDA__ATT_WB_053007_F10
Table of Contents
Section 1: Getting Started ..........................................................................4
Activating Your Phone ...............................................................................................4
Powering On or Off the Phone ...................................................................................7
Setting Up Your Voice Mail ........................................................................................7
Section 2: Understanding Your Phone .......................................................9
Features of Your Phone .............................................................................................9
Open View of Your Phone ........................................................................................10
Closed View of Your Phone .....................................................................................11
Internal Display Layout ...........................................................................................12
Selecting Functions and Options .............................................................................13
Command Keys ......................................................................................................14
Section 3: Call Functions ..........................................................................17
Making a Call ..........................................................................................................17
Adjusting the Call Volume .......................................................................................18
Answering a Call .....................................................................................................19
Recent Calls ...........................................................................................................19
Call Time ................................................................................................................20
Data Volume ...........................................................................................................20
Data Call Time ........................................................................................................20
Silent Mode ............................................................................................................21
Options During a Call .............................................................................................. 21
Section 4: Menu Navigation .....................................................................24
Menu Navigation .....................................................................................................24
Menu Outline ..........................................................................................................25
Section 5: Entering Text ...........................................................................30
Changing the Text Input Mode ................................................................................30
Using T9 Mode .......................................................................................................31
Using Alphabet Mode .............................................................................................. 32
Using Symbols ........................................................................................................33
Using Numbers .......................................................................................................33
Section 6: Messaging ...............................................................................34
Types of Messages .................................................................................................34
Creating and Sending New Messages .....................................................................34
Text Messages .......................................................................................................34
Retrieving New Messages .......................................................................................37
Using Message Options ..........................................................................................39
Using Instant Messenger (IM) ..................................................................................39
Using Message Templates ......................................................................................40
Message Settings ...................................................................................................40
Memory Status .......................................................................................................43
Section 7: Understanding Your Address Book .........................................44
1
Using Contacts List .................................................................................................44
Adding a New Contact .............................................................................................46
Speed Dial ..............................................................................................................48
Finding My Own Phone Number ..............................................................................49
FDN List ..................................................................................................................49
Group Settings ........................................................................................................50
Management ..........................................................................................................50
Section 8: Changing Your Settings ......................................................... 53
Set Sound ...............................................................................................................53
Set Display .............................................................................................................55
Set Time & Date ......................................................................................................56
Set Phone ...............................................................................................................57
Set Calls .................................................................................................................59
Bluetooth ................................................................................................................61
Set Applications ......................................................................................................62
Security ..................................................................................................................63
Reset Settings .........................................................................................................65
Memory Status .......................................................................................................66
Section 9: Personal Assistant .................................................................. 67
Ringtones / Audio ....................................................................................................67
Graphics .................................................................................................................68
Memory Status .......................................................................................................69
Games & Apps ........................................................................................................69
Camera ...................................................................................................................70
Tools ......................................................................................................................78
Section 10: WAP ....................................................................................... 81
Launching the WAP Browser ...................................................................................81
Access a WAP Site ..................................................................................................81
Navigating the WAP Browser ...................................................................................82
Using Favorites .......................................................................................................83
Downloading Multimedia Files ................................................................................84
Clearing the Cache ..................................................................................................85
Section 11: Accessibility ......................................................................... 86
TTY Settings* ..........................................................................................................86
Section 12: Health and Safety Information ............................................. 87
Health and Safety Information .................................................................................87
Samsung Mobile Products and Recycling ................................................................89
UL Certified Travel Adapter .....................................................................................89
Consumer Information on Wireless Phones .............................................................90
Road Safety ............................................................................................................96
Responsible Listening .............................................................................................97
Operating Environment ...........................................................................................99
Using Your Phone Near Other Electronic Devices .....................................................99
Potentially Explosive Environments .......................................................................101
Table of Contents
2
Emergency Calls ...................................................................................................101
FCC Notice and Cautions .......................................................................................102
Other Important Safety Information .......................................................................102
Product Performance ............................................................................................ 103
Availability of Various Features/Ring Tones ...........................................................104
Battery Standby and Talk Time .............................................................................104
Battery Precautions ..............................................................................................104
Care and Maintenance ..........................................................................................105
Section 13: Warranty Information ..........................................................107
Standard Limited Warranty ...................................................................................107
Index .........................................................................................................112
3
Activating Your Phone
Section 1: Getting Started
Topics Covered
• Activating Your Phone
• Powering On or Off the Phone
• Setting Up Your Voice Mail
This section describes how to start using your phone by activating your service and
setting up your voice mail.
Activating Your Phone
When you subscribe to a cellular network, a plug-in SIM card is provided loaded with
your subscription details, such as your PIN and other optional services.
Removing the Battery
1. If necessary, power-off the phone by holding down the
key until the
power-off image displays.
2. Remove the battery by pressing the battery lock down and slide the battery
cover away, as shown.
Installing the SIM Card
Important!: The plug-in SIM card and its contacts can be easily damaged by scratches or bending. Use
caution when inserting or removing the card and keep all SIM cards out of reach of children.
Make sure the gold contacts of the card face into the phone, then slide the SIM card
into the socket.
Getting Started
4
Removing the SIM Card
To remove the SIM card, slide it away from socket. See the following illustration.
Installing the Battery
1. Align the battery tabs with the slots at the bottom of the phone.
2. Press the battery down until it clicks into place. Make sure that the battery
is properly installed before switching on the phone.
3. With the battery in position on the phone, place the cover back on the
handset and slide it in until it clicks.
5
Activating Your Phone
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. Use the travel adaptor to
charge the battery, and use only Samsung approved batteries and chargers.
Note: You must fully charge the battery before using your phone for the first time. A fully discharged battery
requires up to 4 hours of charge time.
Note: For connection to an electrical supply not located in the U.S., you must use an adaptor of the proper
configuration for the power outlet. Use of the wrong adaptor could damage your phone and void your
warranty.
1. Plug the connector of the travel adaptor into the jack on the side of the
phone.
2. Plug the adaptor into a standard AC wall outlet. When charging is finished,
unplug the adaptor from the power outlet.
3. Remove the adaptor from the charger port.
Getting Started
6
Note: You must unplug the adaptor before removing the battery from the phone during charging to avoid
damage.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time remain, a warning tone
sounds and the “Battery Low” message repeats at regular intervals on the display.
The backlight turns off to conserve the remaining battery power.
When the battery level becomes too low, the phone automatically turns off.
Powering On or Off the Phone
1. Open the phone.
2. Press and hold the
key until the phone power-on screen displays.
3. If the phone asks you to enter a password, enter a password and press the
Confirm soft key or the
key. For more information, refer to "Change
Phone Password" on page 65.
4. If the phone asks for a PIN, enter the PIN and press the OK soft key or the
key. For more information, see "Check PIN Code" on page 64.
The phone searches for your network and after finding it, the Idle screen
displays. Now, you can make or receive calls.
Note: The display language is preset to Automatic at the factory. To change the language, use the
Language menu. For more information, refer to "Language" on page 57.
5. When you wish to switch off the phone, press and hold the
the power-off image displays.
Setting Up Your Voice Mail
To access you voice mail from your keypad, use the following steps:
1. Open the phone to access your keypad.
2. From an Idle screen, press and hold the
key.
3. Follow the voice mail prompts to access messages.
Accessing Your Voice Mail
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Recent Calls and press the
3. Highlight Voice Mail and press the
7
key.
key.
key until
Setting Up Your Voice Mail
4. Highlight Connect to Voice Mail and press the Select soft key or the
key.
5. When connected, follow the voice prompts from the voice mail center.
Changing the Voice Mail Number
Your SIM card gives you default service number of the voice mail center. However,
you may need to change the number. Use the following procedures to change your
voice mail number.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Recent Calls and press Select soft key or the
3. Highlight Voice Mail and press the Select soft key or the
key.
key.
4. Highlight Voice Server Number and press the Select soft key or the
key.
5. Highlight Voice Mail and press the Options soft key and highlight Edit.
Press the Select soft key.
6. In the Change Name field, enter the new name and use the Down
Navigtation key to move to the next field.
7. Edit Number is highlighted. Enter your new Voice Server number and
press the Options soft key and highlight the Save option. Press the Select
soft key to save.
8. Press the
key to return to Idle mode.
Getting Started
8
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• Open View of Your Phone
• Front View of Your Phone
• Display Layout
• Selecting Functions and Options
• Command Keys
This section outlines some key features of your phone. It also displays the screen
and the icons that are displayed when the phone is in use.
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many significant features. The
following list outlines a few of the features included in your phone.
User friendly, menu driven access to features and options.
• Instant Messaging capability
• Multimedia capability
• Speakerphone capability
• Featured applications provide alarms, calendar, calculator, record audio, converter,
timer, stopwatch, and world time.
9
Open View of Your Phone
Open View of Your Phone
The following illustrations show the main elements of your phone:
Keys
The following list correlates to the open and front view illustrations.
1. Display: This screen displays all the information needed to operate your
phone.
2. Soft key: Performs the functions indicated by the screen text on the
bottom of the display
3. Volume/Menu Navigation key: Allows you to adjust the ringer volume in
standby mode or adjust the voice volume during a call. The volume key can
also be used to scroll up or down to navigate through the different menu
options. To mute the ringer during an incoming call, press the volume key
up or down.
4. Send key: Allows you to place or receive a call. In standby mode, press the
key once to access the Recent Call log. If you press and hold the key down,
you will initiate the most recent call from the Recent Call log.
5. Voicemail key: Press and hold the
key to automatically dial your
voicemail.
Understanding Your Phone
10
6. Alphanumeric keypad: Use these keys to enter numbers, letters and
characters.
7. Special Function keys: Asterisk/Shift key-enters the [ ] character for
*
calling features. In text mode, press to change the character input type.
Pound/Space/Quiet Mode key-enters the pound [#] character for calling
features. In text entry mode, press to enter a space between characters.
Press and hold to place handset in Silent mode.
8. Microphone: The Microphone allows the other callers to hear you clearly
when you are speaking to them.
9. Clear key: Deletes characters from the display when you are in text entry
mode. When in a main menu, press to return to the previous menu.
10. Power on/off/Menu Exit key: Ends a call. Press and hold this key for a
few seconds to power your phone On or Off. While in the main menu, it
returns the phone to standby mode and cancels you input. When you
receive an incoming call, press to reject call.
11. WAP Browser/Menu confirm key: When navigating through a menu
accepts the highlighted choice in the menu. If you press once in Idle mode,
the WAP browser will launch.
12. Navigation keys: This key allows you to scroll through phone menu
options and provides a shortcut to phone functions from standby mode.
13. Earpiece: Used to listen to audio from your phone.
Closed View of Your Phone
Keys
The following list correlates to the open and front view illustrations.
11
Internal Display Layout
1. Front LCD: Your phone has an external display on the front of the phone. It
indicates when you have an incoming call or message. It also displays
date, time, reception, battery power, and any icons associated with alerts,
such as messages, or a set alarm.
2. Camera key: launches the camera to take a photo.
3. Power Interface Connector/headset jack: The power interface connector
is used to plug in the charging accessories and the headset cord.
4. Camera lens: the camera lens is used for taking photos.
Backlight
A back light illuminates the display and the keypad when you press any key or open
the phone. It turns off when no keys are pressed within a given period of time, and/
or dims the light, depending on the settings in the Backlight menu.
Internal Display Layout
The display has 3 areas:
Icons
Shows the received signal strength. The greater the number of
bars, the stronger the signal.
Appears when a new text message has been received.
Appears when a new voice mail has been received.
Appears when a new multimedia message has been received.
Appears when you set an alarm to ring at a specified time. For
more information, refer to "Alarm" on page 74.
Understanding Your Phone
12
Appears when you there is no network coverage available.
Appears when a call is in progress.
Appears when you are connected to a Edge service.
Appears when the Call Forwarding feature is active. For more
information, refer to "Call Answer" on page 59.
Appears when incoming call Alert Type is set to Vibration.
Appears when an incoming call Alert Type is set to Vibration
then Melody.
Appears when an incoming call Alert Type is set to Vibration and
Melody.
Appears when Quiet Mode, Silent All is active.
Appears when Quiet Mode, Vibration All is active.
Appears when Bluetooth wireless technology is active.
Shows the level of your battery. The more bars you see, the
more power you have remaining.
Selecting Functions and Options
Your phone offers a set of functions that can be customized for your ease and
specific needs. These functions are arranged in menus and sub-menus, accessed
using the two soft keys. Each menu and sub-menu allows you to view and alter the
settings of a particular function.
In some functions, you may be asked for a password or PIN. Enter the code and
press the Select soft key or the
key.
When you access a list of options, your phone highlights the currently active option.
If, however, there are only two options, such as On/Off or Enable/Disable, your
phone highlights the option that is not currently active, so that you can select it
directly.
13
Command Keys
Selecting Options
To view the various functions and options available and to select the one you want:
• Press the appropriate soft key.
• To select the function displayed or the option highlighted, press the Select soft key
or the
key.
• To view the next function or highlight the next option on a list, press the Down
Navigation key or the key on the left side of the phone.
• To move back to the previous function or option on a list, press the Up Navigation
key or the key on the left side of the phone.
• To move back up one level in the menu structure, press the Back soft key.
• To exit the menu structure without changing the settings, press the
key.
Command Keys
Functions for the soft keys are defined by what appears above each in the display.
There are two soft keys, the left soft key
and the right soft key
.
Soft Keys
The roles of the soft keys vary depending on the function you are currently using; the
labels on the bottom line of the display just above each key indicate their current
role.
Left Soft Key
Some functions of the left soft key are as follows.
• In the Idle screen, press the Menu (left) soft key
to open the Menu screen.
• When in a menu mode the left soft key
function is Select.
Understanding Your Phone
14
Right Soft Key
Some functions of the right soft key are as follows.
• In the Idle screen, press the Options soft key
to open the Options Menu
screen.
• When in a menu mode the right soft key
function is Back.
Clear Key
The CLR key is used to erase or clear numbers, text, or symbols from the display.
You can also use to return to a previous menu or to return to standby mode from
any menu.
• If you enter an incorrect character, briefly press to backspace (and delete) the
character.
• To erase the entire sentence, press and hold .
• To back up one menu level, briefly press .
End Key
The End key
is used to turn on/off your phone, disconnect calls, and return to
the standby mode.
• Press and hold the End key
to turn on your phone.
• Briefly press
once to disconnect a call.
• Press
to return to standby mode from any menu, or to cancel the last input.
Send Key
The Send key
is used to answer calls, dial calls, and to recall the last number(s)
dialed, received, or missed.
• Press
once to answer calls.
• Enter a number and briefly press
to make a call.
• Briefly press
in standby mode to display a list of recent calls to and from your
phone.
• Press
twice in standby mode to call the most recent number.
• Press
to pick up a waiting call.
15
Command Keys
Navigation Key
Use the directional keys on the navigation key to browse menus, sub menus, and
lists. Press the Up or Down Navigation when jumping to highlighted links on the
web.
Each key also acts as a shortcut to launch applications.
Speakerphone Key
During a call, press the
key to enable the speakerphone option. Use the volume
keys (located on the left side of your phone) to adjust the volume.
Understanding Your Phone
16
Section 3: Call Functions
Topics Covered
• Making a Call
• Adjusting the Call Volume
• Recent Calls
• Call Time
• Data Volume
• Data Call Time
• Silent Mode
• Options During a Call
This section describes how to make or answer a call. It also includes the features
and functionality associated with making or answering a call.
Making a Call
When the Idle screen displays, enter the area code and phone number, and press the
key.
Note: When you activate the Auto Redial option in the Set Calls > Voice Call > Auto Redial, the phone will
automatically redial up to 10 times when the person does not answer the call or is already on the
phone. For more information, refer to "Set Calls" on page 59.
Making an International Call
1. Press and hold the
key. The + character appears.
2. Enter the country code, area code, and phone number. Press the
key.
Correcting a Dialed Number
Use the following steps to correct a mis-typed entry when dialing.
1. After dialing a number
• To clear the last digit displayed, press the key.
• To clear another digit in the number, press the Left or Right Navigation key until
the cursor is immediately to the right of the digit to be cleared. Press the key.
• To enter a missing digit press the Left or Right Navigation key until the cursor is
in position and enter the digit.
17
Adjusting the Call Volume
• To clear the whole display, press and hold the key. The Idle screen displays.
2. Press the
key to return to the Idle screen.
Ending a Call
When you want to finish your call, briefly press the
key.
Redialing the Last Number
All incoming, outgoing and missed calls are listed in the Recent Calls Menu. If the
number or caller is listed in your Address Book, the name associated displays.
To access the Recent Calls menu:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Use the Navigation keys to highlight Recent Calls and press
Select.
3. Use the Up and Down Navigation keys to scroll through the Recent Calls
options. Choose from All Calls, Missed Calls, Calls Made, Calls
Received, or Voice Mail.
4. From the Idle Screen, press the
key to display a list of the most recent
numbers used in the order you dialed or received them.
5. Use the Up and Down Navigation keys to scroll through the numbers until
the number you want highlights.
6. To dial the number, highlight the number and press the
key.
Making a Call from the Address Book
You can store phone numbers that you use regularly on the SIM card or in the
phone’s memory. These entries are collectively called the Address Book.
Once you have stored a number in the Address Book, you can dial it by pressing a
few keys using the Speed Dial feature.
For further details about the Address Book feature, see "Finding an Address Book
Entry" on page 44.
Adjusting the Call Volume
During a call, if you want to adjust the earpiece volume, use the Volume keys on the
left side of the phone.
Press the
key to increase the volume level and the
key to decrease the level.
In Idle mode, you can also adjust the ringer volume using these keys.
Call Functions
18
Answering a Call
When a call is received the phone rings and displays the caller’s phone number, or
name if stored in the Address Book.
1. From the Idle Screen press the
key or the Accept soft key to answer
the incoming call.
If the Any Key option in the Call Answer menu is activated, you can press
any key to answer a call except the
key and the Reject soft key.
If the Flip Open option in the Call Answer menu is activated, you can
answer the call simply by opening the phone.
Note: To reject an incoming call, press and hold the Volume keys on the left side of the phone before
opening the phone. A quick press of side volume key silences ringer on incoming call.
2. End the call by closing the phone or by pressing the
key.
Note: You can answer a call while using the Address Book or menu features. After ending the call, the
phone returns to the function screen you were using.
Recent Calls
The phone stores the numbers of the calls you’ve dialed, received, or missed in the
Recent Calls menu. If the number or caller is listed in your Address Book, the name
associated displays.
Viewing Missed Calls
The number of calls you have missed displays on the Idle screen when a call is
missed. To view the number details, use the following steps:
1. If the phone is closed, open the phone.
2. Press the View soft key. The most recent missed call displays.
Note: If there is a voicemail sent by the same number, associated icons display and can be selected.
3. To scroll through the missed calls, press the Up or Down Navigation key.
Deleting a Missed Call
To delete a missed call entry, use the following steps:
1. Immediately after missing a call, press the View soft key.
2. Press the Options soft key and select Delete.
3. Choose from Selected or All and press the Select soft key, or the
19
key.
Call Time
4. At the “Delete?” prompt, press the Yes soft key to confirm deletion or No
to cancel.
You can press the
key at any time to exit the Missed Call feature.
Call Time
1. From the Idle Screen, press
Recent Calls and press
Menu. Use the Navigation keys to highlight
Select or the
key.
2. Highlight Call Time and press the Select soft key or the
key.
3. The following options are available.
• Last Call Time: shows the length of time for the last call.
• Total Sent: shows the total length of time for the calls made.
• Total Received: shows the total length of time for the calls received.
4. Press the Reset soft key.
5. At the “Are you sure?” prompt, press the Yes soft key to confirm the reset
or No to cancel.
6. Enter your password. At the “Confirm New Password”, re-enter the same
password and press the OK soft key.
7. Press the Back soft key or the
key to end.
Data Volume
1. From the Idle Screen, press
Recent Calls and press
Menu. Use the Navigation keys to highlight
Select or the
key.
2. Highlight Data Volume and press the Select soft key or the
key.
3. Use the Up and Down Navigation keys to view the following information:
• Recent Volume: shows the Sent, Received, and Total data size used.
• Total Volume: shows the Sent, Received, and Total volume of data from the
phone.
4. Press the Back soft key or the
key to end.
Data Call Time
1. From the Idle Screen, press
Recent Calls and press
Menu. Use the Navigation keys to highlight
Select or the
key.
2. Highlight Data Call Time and press the Select soft key or the
key.
3. The following options are available:
• Last Data Call: shows the time used for the last data call sent or received.
• Total Data Call: shows the total data time used to send or receive data.
4. Press the Back soft key or the
key to end.
Call Functions
20
Silent Mode
Silent mode is convenient when you wish to stop the phone from making noise, in a
theater for example.
In Idle mode, press and hold the
key until the “Silent Mode Activated” message
and the
Silent Mode icon displays.
In Silent mode, your phone will vibrate and light up the external LCD display or just
light the external LCD display depending on the setting in the Silent Mode feature.
To exit and reactivate the previous sound settings, press and hold the
key again
until “Silent Mode Deactivated” displays. The
Silent Mode icon no longer
displays.
Options During a Call
Your phone provides a number of control functions that you can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you want. You can also make
another call while you have a call in progress if your network supports this service.
To put a call on hold:
1. While on a call, press the Options soft key. Highlight Hold and press the
Select soft key. The call is on hold.
2. You can reactivate the call whenever you want, by pressing the Resume
soft key.
To make a call while you have a call in progress:
1. Place the call on hold using the previous procedures, and enter the phone
number that you wish to dial or look it up in the Address Book.
2. Press the
key to dial the second call.
When you have an active call and a call on hold, you may switch between the two
calls, changing the one on hold to active and placing the other on hold. To switch
between the two calls, press the Options soft key. Highlight Hold and press the
Select soft key. The current call is placed on hold and the call on hold is reactivated
so that you can continue conversing with that person.
21
Options During a Call
In Call Options
During a call, press the Options soft key to access the following:
• Hold: Places the call on hold.
• New Call: places the current call on hold and allows you to enter and dial another
number.
• Contact List: accesses the Address Book information.
• Message: allows you to send a message from your Inbox, Outbox (My Messages),
or to create a new text message.
• Calendar: launches the calendar and allows you to create events while on a call.
• Mute Keypad Tone: Silences the key tones when on the call.
• Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to the contacts you
have selected.
If you have are in a multi-party call, the following options also display.
• Swap: allows you to switch between the two active calls.
• Join: Joins the calls you have established with your phone.
• End Held Call: Ends the call that is placed on hold.
When you want to finish, end each call normally by pressing the
key.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone off, so that the other person
cannot hear you.
Example: You wish to say something to person in the room, but do not want the person on the phone to
hear you.
During a call, to switch the microphone off temporarily:
1. Press the
Mute. Unmute displays.
2. Press the
Unmute to deactivate the Mute function.
Muting or Sending Key Tones
These options allow you to turn the key tones off or on. If the Mute Keypad Tone
option is selected, your phone does not transmit the DTMF (Dual Tone MultiFrequency) tones of the keys, which allows you to press keys without hearing
annoying key tones during a call.
Note: To communicate with answering machines or computerized telephone systems, the Send Keys option
must be selected.
Call Functions
22
Searching for a Number in Address Book
You can search for a number in Address Book during a call.
1. Press the Options soft key.
2. Press the Down key to highlight the Contact List option.
3. Press the Select soft key or the
key.
4. Contact List is highlighted.
5. Enter the first few letters of the name to display entries listed starting with
the first entry matching your input or use the Navigation keys to select an
entry.
6. Press the Options soft key.
7. To view the highlighted entry, press the
View soft key.
For further details about the Contact List feature, see "Finding an Address Book
Entry" on page 44.
Call Waiting
The Call Waiting feature allows you to answer an incoming call while you have a call
in progress, if this service is supported by the network, and you have set the Call
Waiting-Voice Calls Menu to Activate. You are notified of an incoming call by a call
waiting tone.
To answer a call while you have a call in progress:
1. Press the
key or the Accept soft key to answer the incoming call. The
first call is automatically put on hold.
2. To switch between the two calls, press the Options soft key and highlight
Swap. Press the Select soft key or the
key.
3. To end a call on hold, press the Options soft key or the
the End Held Call option. Press the
To end the current call, press the
23
key.
key.
key and select
Section 4: Menu Navigation
Topics Covered
• Menu Navigation
• Menu Outline
This section explains the menu navigation for your phone. It also includes an outline
of all the available menus associated with your phone.
Menu Navigation
Menus and sub-menus can be accessed by scrolling using the Navigation keys or by
using the shortcut keys.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Scroll using the Navigation keys to reach a main menu Settings for
example. Press the Select soft key or the
key to enter the menu.
3. If the menu contains sub-menus, Set Phone for example, you can access
them by highlight the option and by pressing the Select soft key or the
key. If the menu that you have selected contains further options, repeat
this step.
4. To scroll through the menus, press the Up or Down Navigation key or the
Volume key (located on the left side of your phone). Press the Select soft
key, or the
key to make your selection.
5. To return to the previous menu level, press the Back soft key, the
6. To exit the menu without changing the settings, press the
key.
key.
Using Shortcuts
Numbered menu items, such as menus, sub-menus, and options can be quickly
accessed by using their shortcut numbers. In Menu mode, Main Menus can be
accessed by pressing the number keys (1 to 0) corresponding to their location on the
screen.
Example: Accessing the Language menu.
Menu Navigation
24
1. Press the Menu soft key.
2. Press the
key for Settings.
3. Press the
key for Set Phone
4. Press the
key for Language.
The available languages are displayed.
Menu Outline
The following list shows the menu structure and indicates the number assigned to
each option.
1: Mobile Email
2: Messaging
1: Create New Message
1: Text Message
2: Multimedia Message
2: Inbox
3: IM
1: AIM
2: Windows Live
3: Yahoo!
4: Sent
5: Outbox
6: Drafts
7: My Folder
8: Templates
9: Delete All
10: Messaging Settings
11: Memory Status
3: Recent Calls
1: All Calls
2: Missed Calls
3: Calls Made
4: Calls Received
5: Voice Mail
1: Connect to Voice Server
2: Voice Server Number
6: Speed Dial List
7: Contact List
8: Delete All
25
9: Call Time
10: Data Volume
1: Recent Volume
2: Total Volume
11: Data Call Time
4: MEdia Net
1: MEdia Net Home
2: Favorites
3: Enter URL
4: Browser Profiles
5: Clear Cache
5: AT&T Mall
1: Shop Tones
2: Shop Games
3: Shop Graphics
4: Shop Multimedia
5: Shop Applications
6: Shop Themes
7: MEdia Net Home
6: Games & Apps
1: Shop Games
2: Shop Applications
3: My Games & Apps
7: My Stuff
1: Ringtones / Audio
1: Shop Tones
2: Downloaded Audio
3: Record Audio
4: Recorded Audio
5: Default Ringtones
2: Graphics
1: Shop Graphics
2: Downloaded Graphics
3: Take Photo
4: My Photos
5: Default Wallpapers
3: Applications
1: Camera
2: Record Audio
Menu Navigation
26
3: Alarm
4: Calendar
5: Tools
4: Memory Status
1: My Files
2: Calendar
8: Address Book
1: Contact List
2: Add New Contact
1: Phone
2: SIM Card
3: Group
4: Speed Dial List
5: My Business Card
6: Own Number
1: Empty
2: Empty
3: Empty
4: Empty
7: FDN List
8: Management
1: Default Saving
2: Copy All to
3: Sort by Contacts
4: Delete All
5: Memory Status
9: Service Number*
9: Settings
1: Set Sound
1: Incoming Call
2: Keypad Tone
3: Message Tone
4: Power On/Off Tone
5: Silent Mode
2: Set Display
1: Main Display
1: Wallpaper
2: Info Display
3: Theme
27
4: Menu Style
5: Pop up List Menu
6: Dailing Display
7: Calendar
2: Front Display
1: Clock
2: My Image
3: Screen Slogan
3: Set Time & Date
4: Set Phone
1: Language
2: Shortcuts
3: Light Settings
4: Greeting Message
5: Network Selections*
6: Airplane Mode
5: Set Calls
1: General
1: Show My Number
2: Call Answer
3: Call Status Tones
4: Alerts on Call
2: Voice Call
1: Call Forwarding
2: Call Barring*
3: Call Waiting
4: Auto Redial
6: Bluetooth
1: Turn Bluetooth On
2: My Headsets
3: Bluetooth Services
7: Set Applications
1: IM Settings
2: Messaging Settings
3: Browser Settings
4: Camera Settings
5: Record Audio Settings
6: Calendar Settings
7: Address Book Settings
Menu Navigation
28
8: Security
1: Lock Phone
2: Lock SIM Card
3: Check PIN Code
4: Lock Applications
5: Show Caller Information
6: Set FDN Mode
7: Change Phone Password
8: Change PIN Code
9: Change PIN2 Code
9: Reset Settings
10: Memory Status
1: Shared Memory
2: Messaging
3: My Stuff
4: Address Book
* Shows only if supported by your SIM card.
29
Changing the Text Input Mode
Section 5: Entering Text
Topics Covered
• Changing the Text Input Mode
• Using T9 Mode
• Using Alphabet Mode
• Using Symbols
• Using Numbers
This section outlines how to select the desired text input mode when entering
characters into your phone. This section also describes how to use the T9 predictive
text entry system to reduce the amount of key strokes associated with entering text.
Changing the Text Input Mode
The Text Input option switches the key entry functions from T9 Mode, ABC Mode,
Numeric Mode, and Symbols Mode.
T9 Mode
This mode allows you to enter words with only one keystroke per letter.
Each key on the keypad has more than one letter; for example, pressing
the 5 key can enter J, K, or L. However, the T9 mode automatically
compares the series of keystrokes you make with an internal linguistic
dictionary to determine the most likely word, thus requiring far fewer
keystrokes than the traditional Alphabet mode.
ABC Mode
This mode allows you to enter letters by pressing the key labeled with the
letter you want. Press the key once, twice, three, or four times until it
displays.
Numeric Mode
This mode allows you to enter numbers.
Symbols Mode
This mode allows you to enter symbols, such as punctuation marks.
Entering Text
30
When you are in a field that allows characters to be entered, you will notice the text
input mode indicator on the display.
1. To change the text input mode, press the
key.
2. Choose from the following options:
: ABC mode (short press the
Abc, and abc mode)
key to toggle between ABC,
: T9 mode (press and hold the
key to reach the T9 mode.)
Then short presses toggle between T9EAb, T9EAB, and T9Eab
mode.
: Numeric mode (short press the
Numeric mode)
: Symbol mode (press and hold the
mode)
key to toggle between
key to change to Symbol
Note: Press and hold the
key to access Symbol mode. Press the number key corresponding to the
symbol you want to enter. Use the Up and Down Navigation keys to scroll through the available
symbols. Press the Cancel soft key to exit.
Using T9 Mode
T9 Predictive Text input mode is based on a built-in dictionary.
Enter a Word in T9 Mode
In T9 mode, begin entering a word by pressing the 2 to 9 keys. Press each
key only once for each letter. The built-in dictionary lists words that match
the keystrokes you have entered.
31
Using Alphabet Mode
Example: To enter “Hello”, press
,
,
,
,
The word that you are typing appears in the display. It may change with
each key that you press.
3. Enter the whole word before editing or deleting the keystrokes.
4. When the word displays correctly, go to step 5.
If the word doesn’t display correctly, press the
key to display
alternative word choices for the keys that you have pressed.
Example: Both “Of” and “Me” have the
choice first.
and
keys. The phone displays the most commonly used
5. Insert a space by pressing the
key and start entering the next word.
Add a New Word into the T9 Dictionary
1. After pressing the keys corresponding to the word you want to add, press
the
key to display the alternative words.
2. When the last alternative word is displayed, Spell displays. Press the Spell
soft key or the
key.
3. Enter the word you want to add using ABC mode.
4. Press the Add soft key or the
key.
The word is added to the T9 dictionary and becomes the first word for the
associated keypress series.
Note: This feature may not be available for some languages.
• To enter periods, hyphens, colons, or parenthesis, press the
key. T9 mode
applies grammar rules to ensure that correct punctuation is used.
• To shift case in T9 mode, use the
key. There are 4 cases: Initial capital, Capital
lock, Lower case, and Numeric.
• You can move the cursor by using the Left and Right keys. To delete letters, press
the key. Press and hold the key to clear the display.
Using Alphabet Mode
To use the Alphabet Mode use the
to
keys to enter your text.
1. Press the key labeled with the letter you want:
• Once for the first letter
• Twice for the second letter
Entering Text
32
• And so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a different key. When entering the same letter twice or
a different letter on the same key, just wait for a few seconds for the cursor to move to the right
automatically, and then select the next letter.
Keys
•
•
•
•
•
•
•
•
•
•
Using Symbols
Symbol mode enables you to insert symbols and punctuation marks into text.
1. To enter symbol mode press and hold the
key.
2. To select a symbol, press the corresponding number key.
3. To display more symbols, press the Up or Down Navigation key.
4. To clear the symbol(s), press the
key. When the input field is empty, this
key returns the display to the previous mode.
5. To insert the symbol(s) into your message, press the OK soft key or the
key.
Using Numbers
Number mode enables you to enter numbers into a text message. Press the keys
corresponding to the digits you want to enter.
33
Types of Messages
Section 6: Messaging
Topics Covered
• Types of Messages
• Creating and Sending New Messages
• Text Messages
• Retrieving New Messages
• Using Message Options
• Using Instant Messenger (IM)
• Using Message Templates
• Message Settings
• Memory Status
This section describes how to send or receive different types of messages. It also
includes the features and functionality associated with messaging.
Types of Messages
Your phone provides the following message types:
• IM Messages
• Text Messages
• Multimedia Messages
Creating and Sending New Messages
Text Messages
Short Message Service (SMS) allows you to send and receive short text messages to
and from other mobile phones. In addition, your phone supports the Enhanced
Messaging Service (EMS), which enables you to include simple pictures, melodies,
and animated images in your messages. To use this feature, you must subscribe to
your service provider’s message service.
The Message icon (
) displays when you have received new text messages.
When the memory is full, an error message displays and you cannot receive any new
messages. Use the Delete option in each message box to delete obsolete messages.
1. In Idle mode, press the Menu soft key to access Menu mode.
Messaging
34
2. Select Messaging and press the Select soft key or the
key. Create
New Message is highlighted. Using the Up or Down Navigation key,
highlight Text Message and press the Select soft key or the
key.
3. When you have finished writing your message, press the Options soft key.
Choose from the following options:
• Insert: allows you to insert from the predefined Text Templates options. Select
Contact List to add the contact to the message, or Favorites to insert URLs for
News, Sports, Weather, MEdia Net, or any other Favorites you have defined.
• Add Media: allows you to add pictures, animation, or melody to your message.
- Picture: allows you to add a picture to your message.
- Animation: allows you to add an animation to your message. Select between
Preset Emotions or My Animations.
- Melody: allows you to add a melody to your message. Select between Preset
Melody and My Melody.
• Attach: allows you to attach the following to the message:
- Business Card: allows you to attach your business card to the message.
- Appointment: allows you to attach an appointment to the text message
- Anniversary: allows you to attach an anniversary reminder or note to the
message.
- Miscellaneous: allows you to attach a miscellaneous file to the message.
- Task: allows you to attach a task to the text message.
• Save to: allows you to save the text message to your Drafts or your My Folder.
• Select Language: allows you to set the language to English, French, or
Spanish.
• Input Method: allows you to set the default input method for the text messaging
screen. Choose from ab, Ab, AB, T9ab, T9Ab, T9AB, Numeric, Symbols.
• Text Style: allows you to set the Text Size (Small, Medium, Large), Text
Style (Normal, Underline, Strikethrough), Bold, Italic, and Alignment for the
text entered.
• Back: allows you to save the settings and the text you’ve entered to the Draft
folder.
4. Press the Send To soft key. Press the Options soft key to enter contact
information.
5. Highlight Number and press the Select soft key. Enter a destination
number Contact List, Recent Recipients, Group,FDN Contacts, or Save to.
6. Press the Send soft key to send the message.
35
Text Messages
Multimedia
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Messaging and press the Select soft key or the
Create a Message and press the Select soft key or the
key. Select
key.
3. Highlight Multimedia Message and press the Select soft key or the
key.
4. Press the Options soft key to view the following options:
• Subject
- Add: allows you to add a subject to the message.
- Preview: allows you to preview your messages before sending.
- Save to: allows you to save the message to Drafts or My Folder.
- Add Page: allows you to add additional pages to your message.
- Edit Page: allows you to edit the text on the message.
- Attach: allows you to attach a file to the message.
- Send settings: allows you to select the Delivery Report, Read Reply, Priority,
Expiry, and Delivery After.
- Back: returns you to the previous screen.
5. Using the Up or Down Navigation key, highlight Graphics and press the
Options soft key and highlight Add to add a picture. Highlight Take Photo
to launch the camera or select My Photos to select a photo previously
taken. Select Downloaded Graphics to choose from the downloaded
graphics folder.
• Graphics
- Add: allows you to add a take a photo, add from My Photos, or a photo you have
downloaded. subject to the message.
- Preview: allows you to preview your messages before sending.
- Save to: allows you to save the message to Drafts or My Folder.
- Add Page: allows you to add additional pages to your message.
- Edit Page: allows you to edit the text on the message.
- Attach: allows you to attach a file to the message.
- Send settings: allows you to select the Delivery Report, Read Reply, Priority,
Expiry, and Delivery After.
- Back: returns you to the previous screen.
6. Using the Up or Down Navigation key, highlight Audio and press the
Options soft key and highlight the Add option to add an audio file.
Highlight Record Audio to launch the Audio Recorder or select Recorded
Audio to select a audio previously recorded. Select Downloaded Audio to
choose from the downloaded audio files.
Messaging
36
• Audio
- Add: allows you to add newly recorded audio file, a previously recorded audio, or
a downloaded audio file.
- Preview: allows you to preview your messages before sending.
- Save to: allows you to save the message to Drafts or My Folder.
- Add Page: allows you to add additional pages to your message.
- Edit Page: allows you to edit the text on the message.
- Attach: allows you to attach a file to the message.
- Send settings: allows you to select the Delivery Report, Read Reply, Priority,
Expiry, and Delivery After.
- Back: returns you to the previous screen.
• Message
- Add: allows you to add a message.
- Preview: allows you to preview your messages before sending.
- Save to: allows you to save the message to Drafts or My Folder.
- Add Page: allows you to add additional pages to your message.
- Delete Page: allows you to delete pages to your message.
- Edit Page: allows you to edit the Duration, Move Page Forward, Move Page
Back.
- Attach: allows you to attach a file to the message.
- Send settings: allows you to select the Delivery Report, Read Reply, Priority,
Expiry, and Delivery After.
- Back: returns you to the previous screen.
7. Press the Send To soft key to enter a contact. Press the Options soft key to
choose from:
• Contact List
• Group
• FDN Contacts
• Recent Recipients
• Common Address
• Send
• Save to the Drafts or My folder
• Change Recipients to Cc or Bcc
8. When you have finished entering destination numbers, press the Send key.
Retrieving New Messages
While text messages from other phones are delivered directly to your phone,
Multimedia messages will be stored in the Inbox of the message server and the
server will alert you to new messages. Therefore you need to retrieve new messages
to your phone and read them on the phone.
37
Retrieving New Messages
Retrieving an Multimedia Message
When a new Multimedia message comes in, the display shows the Multimedia
Message icon ( ) and a text notification along with the sender’s number.
1. Press the View soft key to view brief information about the message, such
as the sender’s number, the message size, and the subject.
If you want to view the message later in the Inbox, press the Back soft key.
2. To view the message, press the Select soft key or the
key.
3. Press the Options soft key or the
key to access the following options:
• View: allows you to view to the message.
• Retrieve: retrieves messages from the network.
• Delete: allows you to delete the selected message or all messages.
• Sort by: allows you to sort by Date, Read/Unread, Sender, Type, Size, or Subject.
• Call Back: allows you to call the sender of the message.
• Lock: allows you to lock the message to prevent deletion.
4. To scroll through the message, press the Up or Down key.
5. When you have finished, press the
key.
Viewing a Message
1. In Idle mode, press the Menu soft key and highlight Messaging. Press the
Select soft key or the
key.
2. Highlight the message folder and press the Select soft key or the
key.
3. Highlight Inbox and press the Select soft key. The message list opens.
The icons on the left of the number indicates the message type.
•
: indicates SMS
•
: indicates Multimedia
4. Select a message on the list. The message content displays.
5. Press the Up or Down key to scroll through the message screen. For an
Multimedia message, press the Up or Down key to scroll to other pages, if
the message has more than one message.
6. When you have finished, press the
key.
Messaging
38
Using Message Options
While viewing the content of a message, press the Options soft key to access the
following options:
Options for SMS Messages
• Reply: allows you to reply to the message via Text message.
• Call Back: allows you to dial the originating message number.
• Forward: allows you to forward the message.
• Delete: deletes the message.
• Move to Phone/Move to SIM: If a message is stored in the SIM card, it is saved to
the phone’s memory. If a message is stored in the phone’s memory it is saved to
the SIM card.
• Add to Block List: adds the number the message was sent from to the blocked list.
• Extract Address: allows you to save the recipient or sender’s number and URL,
Email addresses or phone numbers from the message text.
• Lock: allows you to lock the message to prevent deletion.
Options for Multimedia Messages
• View: allows you to view to the message.
• Retrieve: retrieves messages from the network.
• Delete: allows you to delete the selected message or all messages.
• Sort by: allows you to sort by Date, Read/Unread, Sender, Type, Size, or Subject.
• Call Back: allows you to call the sender of the message.
• Lock: allows you to lock the message to prevent deletion.
Using Instant Messenger (IM)
The Instant Messaging function allows you to send and receive instant messages
using AIM Windows Live and Yahoo! communities. You must first create a default
community account before accessing it on your phone. To access your default
community session settings, use the following steps:
Default Community Settings
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Messaging, and press the Select soft key or the
3. Select IM and press the Select soft key or the
key.
key.
4. Select Default Community and press the Select soft key or the
key.
5. Use the Navigation keys to highlight your option, and press the Select soft
key or the
39
key to save your selection.
Using Message Templates
Using Message Templates
Your phone has message templates to allow you to retrieve them when creating a
message. You can change the templates as your preferences or send a message
immediately.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Messaging and press the Select soft key or the
Templates and press the Select soft key or the
key. Highlight
key.
3. Highlight a template and press the Select soft key to access the following
options:
• Send via: allows you to send an SMS and MMS message using the template.
• Edit: allows you to change the template.
• Delete: deletes the selected template.
4. When you have finished, press the
key.
Deleting Messages
You can delete the messages in each message folder(s) individually or all at one
time. You can also delete all of your messages at one time.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Messaging and press the Select soft key or the
key.
3. Highlight either Delete All and press the Select soft key.
4. Using the Up or Down Navigation key and press the
key to select the
message folder(s) you want to empty.
To delete all of the messages in all folders, select All Messages.
5. Press the Delete soft key. At the “Delete?” pop-up, press the
key to
mark files with protection to be deleted or press the Yes soft key to delete.
6. When you have finished, press the
key.
Message Settings
You can set up various options for using messaging services.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Messaging and highlight Message Settings. Press the Select soft
key or the
key.
3. Select the type of messages for which you want to change. Press the
Select soft key or the
key.
Messaging
40
Text Message
The following options are available:
• Send Settings: allows you to set the following options:
• Reply Path (SIM Dependent): allows the recipient of your message to send
you a reply through your message center, if your network supports this service.
• Delivery Report (SIM Dependent): allows you to activate or deactivate the
report function. When this function is activated, the network informs you whether
or not your message has been delivered.
• Block Number: allows you to block a number from being received on your handset.
Multimedia Message
The following options are available:
• Send Settings:
• Delivery Report: when this option is enabled, the network informs you
whether or not your message has been delivered.
• Read Reply: when this option is enabled, your phone sends a request for a
reply along with your message to the recipient.
• Priority: you can select the priority level of your messages.
• Expiry: select the length of time you wish the message to remain on the MMS
server.
• Delivery After: you can set a time delay before the phone sends your
messages.
• Receive Settings: you can specify the category of messages you want to retrieve.
Allows you to set the following:
• Anonymous Reject: allows you to automatically reject messages with a
category of anonymous.
• Ads allowed: allows you to automatically reject messages with a category of
advertisement.
• Report Allowed: allows messages with a report.
• Message Reception: allows you to set the message receipt options. Choose
from Manual, Automatic, or Reject.
• Profiles: you can select a connection profile to be used for sending and receiving
Multimedia messages.
• Current Profile: allows you to select an option for sending a text message. Choose
from the following options:
• AT&T MMS
• Profile 2
• Profile 3
• Profile 4
41
Message Settings
• Profile 5
• Profile Settings
• AT&T MMS
• Profile 2
• Profile 3
• Profile 4
• Profile 5
• Block Number: allows you to enter numbers to be blocked from your handset.
• Message Class: allows you to set the message class default for your messages.
Choose from Text Only, Small Imaging, Moderate Imaging.
• Creation Mode: allows you to set the creation mode for the message. Choose from
Warning, Free, and Restricted.
Please contact your service provider for further details.
Using Instant Messenger (IM)
The Instant Messaging function allows you to send and receive instant messages
using AIM and Yahoo communities. You must first create a default community
account before accessing it on your phone. To access your default community
session settings, use the following steps:
Default Community Settings
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Messaging, and press the Select soft key or the
3. Select IM and press the Select soft key or the
key.
key.
4. Select Default Community and press the Select soft key or the
key.
This is the service that will load when you press the IM soft key.
5. Use the Navigation keys to highlight your option, and press the Select soft
key or the
key to save your selection.
Push Message
The following options are available:
• Receive: you can specify whether to turn push message reception enable Always,
Never,Text Mesage-C Specific.
• Service Center: you can specify whether to load this service:
Messaging
42
Memory Status
You can check the amount of the memory being used and the memory remaining for
multimedia messages.
The display shows the total space including the used and free space. You can also
view how much space is currently occupied by each message box.
43
Using Contacts List
Section 7: Understanding Your Address Book
Topics Covered
• Using Contacts List
• Adding a New Contact
• Speed Dial
• Finding My Own Phone Number
• FDN List
• Group Settings
• Management
This section allows you to manage your daily contacts by storing their name and
number in your Address Book. Address Book entries can be sorted by name, entry, or
group.
Using Contacts List
Dialing a Number from Address Book
Once you have stored phone numbers in the Address book, you can dial them easily
and quickly by using the location numbers that were assigned to them in the
Address Book.
Finding an Address Book Entry
You can store phone numbers and their corresponding names in your SIM card and
phone’s memories. They are physically separate but are used as a single entity,
called Address Book.
Depending on your particular SIM card, the maximum number of phone numbers the
SIM card can store may differ.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, and press the Select soft key or the
3. Select Contact List and press the Select soft key or the
key.
key.
4. Enter the first few letters of the name.
The Address Book entries are listed, starting with the first entry matching
your input.
Understanding Your Address Book
44
5. To select a different entry, press the Up or Down Navigation key until the
entry you want is highlighted.
6. Once you have found the entry, press the
key to dial the number, or
press the Options soft key to access the Address Book entry options.
Using Address Book Entry Options
While accessing any Address Book entry, press the Options soft key to use the
options for the entry.
The following options are available:
• Edit: allows you to edit the name and number. Press the
key to save.
• Send Message: allows you to send a text message or a multimedia message to
this contact.
• Call: allows you to place the call from this screen.
• Copy to Phone/SIM: allows you to copy the contact information from the SIM to the
phone or from your phone to your SIM.
• Send Business Card via: allows you to send your business card information via
text message or multimedia message.
• Assign Speed Dial: allows you to set the speed dial key for this entry.
• Delete: allows you to delete the selected address book entry.
Address Book Settings
The address book Settings allow you to set default settings for your address book
options.
• Default Saving: allows you to set the address book contact to Phone or SIM, or
Ask on Saving.
• Copy All to: allows you to copy all address book entries to the Phone or SIM Card.
• Sort by Contacts: allows you to set the sort criteria by First Name or Last Name
for the address book when the names are displayed.
• Delete All: allows you to delete All, Phone SIM Card, or SIM Card (FDN)
categories. Press the
key to make your selection, and press the Delete soft
key to Delete. At the “Delete?” prompt, press the Yes or No soft key.
• Memory Status: You can check the amount of the memory being used and the
memory remaining for multimedia messages. The display shows the total space
including the used and free space. You can also view how much space is currently
occupied by each message box.
45
Adding a New Contact
Adding a New Contact
Use the following procedures to store a new contact to your Phone or SIM Card.
Storing a Number in the Phone’s Memory
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Add New Contact by pressing the Up or Down key and press the
Select soft key or the
key.
4. Select Phone and press the Select soft key or the
key.
5. Enter the information on the Create Contact screen. The following fields
are available for input:
• Mobile: assigns the number entered to the Mobile entry.
• Home: assigns the number entered to the Home entry.
• Office: assigns the number entered to the Office entry.
• FAX: assigns the number entered to the Fax entry.
• Other: allows you to enter additional numbers for the entry.
• Email: allows you to enter an e-mail address for the contact.
Tip: To change the text entry mode press the
see "Using Alphabet Mode" on page 32.
key. For further details about how to enter characters,
6. Press the Options soft key and highlight Save. Press the Select soft key or
the
key to save new contact entry.
7. The View screen appears in the display. Use the Up and Down Navigation
keys to choose one of the following options:
• Graphic ID: allows you to set a graphic or Caller ID to this contact. Press the
key to access the Graphic menu. Choose to launch the camera to Create
New, or My Photos, Downloaded Graphics, Default Image, or Not Assigned.
• Ringtone: allows you to choose a ringtone for this contact information.
• Group: allows you to assign this contact to group. Press the
to display
available groups. Use the Up or Down Navigation keys to select a group. Press
the
key to mark your selection and press the Options soft key, highlight
Save to save your selection.
• Notes: allows you enter notes associated with this contact.
8. Press the
key to save. To return to the Idle screen, press the
key.
Understanding Your Address Book
46
Storing a Number in the SIM Card
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Add New Contact by pressing the Up or Down key and press the
Select soft key or the
key.
4. Select SIM Card and press the Select soft key or the
key.
5. Enter the following information for the New Contact.
Note: To change text entry mode press the
"Using Alphabet Mode" on page 32.
key. For further details about how to enter characters, see
• Name: allows you to enter a name for the number entered.
• Number: assigns the number entered to the Mobile entry.
• Location: allows you to assign a location number on your SIM for the number
being entered.
6. Press either the Save soft key or the
key to save your entry.
7. Press the Options soft key to display the following options:
• Edit: allows you to edit the name and number assigned to this contact.
• Send Message: allows you to send a text message or a multimedia message
to this contact.
• Call: allows you to dial the contact from this option.
• Copy to Phone: allows you to copy the contact information to the Phone.
• Send Business Card via: allows you to send your contact information via Text
Message or Multimedia Message.
• Assign Speed Dial: allows you to set a speed dial key to this contact.
• Delete: allows you to delete this contact entry information.
8. To return to the Idle screen, press the
key.
Dialing a Number from the SIM Card
1. In Idle mode, enter the location number for the phone number you want to
dial and press the
key.
The contact entry information is displayed.
2. Press the Left or Right Navigation key to find other numbers on the list.
3. Press the Dial soft key, the
key, or the
selected the number you want to call.
47
key when you have
Speed Dial
Speed Dial
Once you have stored phone numbers from your Address book list, you can set up to
8-speed dial entries and then dial them easily whenever you want, simply by
pressing the associated numeric key.
In Idle mode, to speed dial the numbers assigned to keys (2 to 9), press and hold the
appropriate key.
Note: The Speed Dial List can also be accessed via the Recent Calls menu (option 6).
Setting Up Speed Dial Entries
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Speed Dial List by pressing the Up or Down key, press the Select
soft key or the
key.
4. Select the key in which you wish to assign the speed-dialing number (from
the 2 to 9 keys), and press the Options soft key or the
key.
Note: Memory location 1 is reserved for your Voice mail server number.
5. Highlight Add and press the Select soft key or the
key.
6. Choose to assign a new entry (Contact or FDN Contact), and press the
Select soft key or the
key.
7. Highlight an entry and press the
key.
• Select the previously created entry you would like to add by pressing the Up or
Down key and press the
key to save the entry.
Changing a Number Assigned to a Key
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Speed Dial List by pressing the Up or Down key, press the Select
soft key or the
key.
4. Select the key you wish to change and press the Options soft key.
5. Press Change, select a new entry (Contact or FDN Contact), and press
the Select soft key or the
key.
6. Highlight an entry and press the
key.
Understanding Your Address Book
48
• Select the previously created entry you would like to add by pressing the Up or
Down key and press the
key to save the entry.
Deleting Speed Dial Entries
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Speed Dial List by pressing the Up or Down key, press the Select
soft key or the
key.
4. Select the number assigned key you want to remove and press the
Options soft key.
5. Select Remove and press the Select soft key or the
key.
6. Press the Yes soft key to confirm deletion.
7. When you are finished, press the
key to return to Idle mode.
Finding My Own Phone Number
This function is a memory aid, which you can use to check your own phone number
if you need to do so.
You can assign a name to each of your own phone numbers registered on your SIM
card. You can also edit the names and numbers. Any changes made here do not in
any way affect the actual subscriber numbers on your SIM card.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Select Own Number by pressing the Up or Down key and press the Select
soft key or the
key.
4. Highlight Empty, your mobile number displays in a pop up.
5. Enter additional numbers in the 2, 3, and 4 fields.
6. Press the
key to Save.
FDN List
FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict
your outgoing calls to a limited set of phone numbers.
The following options are available:
• Disable: you can call any number.
• Enable: you can only call phone numbers stored in SIM card.
You must enter your PIN2. You can obtain your PIN2 from your service provider.
49
Group Settings
Group Settings
Editing a Caller Group
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Group by pressing the Up or Down key and press the Select soft
key or the
key.
4. Highlight the group you want to edit by pressing the Up or Down
Navigation key.
5. Press the Options soft key. The following options are available:
• View: allows you to view the contacts assigned to the selected group.
• Add New Group: allows you to create a new group category.
• Edit: allows you to change the name of the group, assigned group
image, and associated ringtone.
• Send Message: allows you to create and send a new Text Message or
Multimedia Message.
• Delete Group: allows you to delete the selected group.
6. When you are finished, press the
key to return to Idle mode.
Note: Group assignments can only be made to contacts stored on the phone. If a contact list entry has a
SIM icon located adjacent to it, then the entry exists only on the SIM card and can not be assigned a
Group category until its copied to the phone. For more details, see "Storing a Number in the Phone’s
Memory" on page 46.
Management
The Management option allows you to copy, delete, and view the memory status for
the Phone and SIM entries on your phone.
Copy All to Phone
You can copy all SIM entries to the Phone using the Copy All to Phone option. When
you copy entries to the phone, duplicate entries are created.
Note: Options are available for phone entries that are not available when stored to the SIM card. For more
details, see "Storing a Number in the Phone’s Memory" on page 46.
Delete All of the Address Book Entries
You can delete All, Phone, SIM, and SIM (FDN) entries from your phone’s memory.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
Understanding Your Address Book
50
3. Scroll to Management by pressing the Up or Down Navigation key and
press the Select soft key or the
key.
4. Highlight Delete All and press the Select soft key or the
key.
5. Highlight the memory location you want to empty and press the
key.
• Available options are: All, Phone, SIM Card, or SIM Card (FDN).
• You can remove the check mark by pressing the
key.
6. Press the Delete soft key to delete the entries in the selected memory
location.
7. At the Delete? confirm screen, press the Yes soft key to continue, or the
No soft key to cancel.
8. Enter the PIN2 password and press the OK soft key or the
key.
9. When the confirmation message appears, press the Yes soft key or the
key to confirm deletion.
Press the No soft key to cancel deletion.
10. When you are finished, press the
key to return to Idle mode.
Checking the Memory Status
You can check how many names and numbers are stored in the Address book, in
both SIM card and the phone memory. You can also see the capacity of both
memories.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Scroll to Management by pressing the Up or Down Navigation key and
press the Select soft key or the
key.
4. Select Memory Status by pressing the Up or Down Navigation key and
press the Select soft key or the
key.
5. When you are finished viewing your phone’s Memory Status, press the
key to return to Idle mode
Using the Service Dialing Numbers
You can view the list of Service Dialing Numbers (SDN) assigned by your service
provider. These numbers include emergency numbers, customer service numbers
and directory inquiries.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
51
key.
Management
3. Select Service Number, by pressing the Up or Down Navigation key and
press the Select soft key or the
key.
4. Scroll through the numbers by using the Up or Down Navigation key.
5. To dial the number displayed, press the
key.
Note: This menu is available only when your SIM card supports Service Dialing Numbers.
Understanding Your Address Book
52
Section 8: Changing Your Settings
Topics Covered
• Set Sound
• Set Display
• Set Time & Date
• Set Phone
• Set Calls
• Bluetooth
• Set Applications
• Security
• Reset Settings
• Memory Status
This section explains the sound and phone settings for your phone. It includes
display settings, security settings, and extra settings associated with your phone.
Set Sound
You can customize various sound settings.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Settings and press the Select soft key or the
key.
3. Select Set Sound and press the Select soft key or the
key. The
following options are available. Use the Down Navigation key to scroll to
and set options:
Incoming Call
This menu allows you to make a selection from the following categories:
• Shop Tones: allows you to access the internet to shop for a new ringtone.
• Alert Type: allows you to set the alert default. Choose from Melody, Vibration,
Vibration Then Melody, or Vibration And Melody.
• Ring Tone: allows you to select from the preloaded ringtones, downloaded audio
and recorded audio.
53
Set Sound
• Volume: allows you to set the volume for your ringer to sound when receiving an
incoming call.
䊳
Press the Left or Right Navigation key to make selection. Press the Save
soft key or the
key to save changes.
Keypad Tone
This menu allows you to select the tone and volume when you press the keypad.
1. Use the Navigation keys to select from On/Off and Key Tone (Beep,
Xylophone).
2. Use the Navigation keys to increase or decrease the Volume.
Message Tone
This menu allows you to select how the phone informs you that a new Text Message
or Multimedia Message has been received.
For each message tone, the following options are available:
• Message Tone: you can select a message tone.
• Alert Type: you can select a type of message alert.
• Off: the phone does not use an Message tone.
• Melody: the phone sounds the selected message tone.
• Vibration: the phone vibrates.
• Vibration Then Melody: the phone vibrates then plays the Message Tone.
Press the Left or Right Navigation key to make selection. Press the Save soft key or
the
key to save changes.
Power On/Off Tone
This menu allows you to enable/disable the melody that the phone sounds when it is
switched on and off.
1. Press the Up or Down Navigation key to make selection. Press the Save
soft key or the
key to save changes.
2. To turn off the sound, select Off.
Silent Mode
This menu item allows you to select what mode your phone will go in when you
press and hold the
key. You can choose Vibration or Mute.
When Vibration is selected your phone will only vibrate.
When Mute is selected your phone will not make a sound or vibrate.
1. Press the Up or Down Navigation key to make selection.
Changing Your Settings
54
2. Press the Save soft key or the
key to save changes.
Set Display
In this menu, you can change various settings for the display or backlight.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Settings and press the Select soft key or the
3. Select Set Display and press the Select soft key or the
key.
key.
The following options are available. Use the Up or Down Navigation key to
scroll to and set options:
Main Display
• Wallpaper: allows you to select the wallpapers.
• Main Display: allows you to set the wallpaper for the main display. Press the
key
to access this option. Choose from the Shop Graphics, Downloaded Graphics, My
Photos, or the Default Wallpapers. Use the Left or Right Navigation keys to view all
key to make your selection.
wallpapers. Press the Select soft key or the
• Menu Background: press the
key to enable the Menu Background
Transparency option. The Transparency option allows you to adjust the amount of
picture shown. Choose from 10% - 90% transparency. Press the Save soft key.
• Info Display: allows you select the settings for the following:
• Text Position: allows you to select the position of the text displayed in Idle mode.
Press the Left or Right Navigation keys to make your selection. Choose from Top,
Bottom, or Off. Press the Save soft key or the
key to make your selection.
• Text Style: allows you to set the text style for your handset. Choose from
Normal,Outline, or Shadow. Press the Save soft key or the
key to make your
selection.
• Text Color: allows you to select the color of the text to be displayed on the Idle
screen. Press the Left or Right Navigation keys to make your selection. Press the
Save soft key or the
key to make your selection.
• Theme: allows you to choose from 2 patterns for your handsets’ theme.
• Menu Style: allows you to choose from Grid Menu or List Menu styles.
• Pop up List Menu: allows you to turn On or Off the pop-up menus for options with
multiple sub menus.
• Dialing Display: Allows you to set the Font Size, the Font Color, and the Background
Color.
• Calendar: allows you to turn On or Off the calendar display on the main display.
55
Set Time & Date
Front Display
The front display allows you to set the following settings
• Clock: connects you the internet and sets the clock time.
• My Image: allows you to set an image to display on the front display.
• Screen Slogan: shows the title displayed on your handset. This text can be
changed by the user. Press the Options soft key to select Save, Select Language,
or Cancel.
Set Time & Date
This menu allows you to change the current time and date displayed. You can also
find out what time it is in another part of the world.
Note: Before setting the time, you must specify your time zone in the World time menu. For more
information, refer to "World Time" on page 80.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Settings and press the Select soft key or the
key.
3. Select Set Time & Date and press the Select soft key or the
key.
The following options are available. Use the Down Navigation key to scroll
to and set options:
• Time Zone Updating: allows you to choose from the following options,
Automatic, Manual Only, or Prompt First.
Tip: If Manual Only is selected, the following options are enabled:
• Home Zone: allows you to set your a time zone for the handset. Press
the
to access the different time zones. When you have made your
selection, press the OK soft key.
• Time: allows you to enter the current time using your keypad. Press the Save
soft key to save. Use the Up or Down Navigation key to access the AM/PM
option. Use the Left or Right Navigation key to select AM or PM. Press the
Select soft key or the
key to save selection.
• Date: allows you to enter the current date using your keypad. Press the Save
soft key to save.
• Time Format: allows you to change the time format to 12 hours or 24 hours.
Use the Left or Right Navigation key to select Time Format. Press the Select
soft key to save.
• Date Format: enter the date format you wish to use when display the date.
Choose from MM/DD/YYYY, DD/MM/YYYY or YYYY/MM/DD
4. Press the Save soft key or the
to save your Time & Date settings.
Changing Your Settings
56
Note: Automatic updates of time and date does not change the time you have set for alarm settings or
calendar memos.
Set Phone
To customize the settings of your phone use the following steps:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Settings and press the Select soft key or the
key.
3. Using the Up or Down Navigation key highlight Set Phone and press the
Select soft key or the
key. The following options are available:
Language
You can select a display language. When the language option is set to Automatic,
the language is automatically selected according to the language of the SIM card
used. Depending on your country, service provider, or the software version of the
phone, the Automatic option may not display.
Press the Save soft key or the
key to save selection.
Shortcuts
Navigation Keys
The Shortcuts menu option allows you to change the options assigned to the
Navigation Keys. Press the Options soft key to Change the assigned shortcut key.
Options List
The Options List allows you to set different options to access quickly using the Left
soft key Options.
Light Settings
Brightness
You can adjust the display brightness for the LCD to see it better in different lighting
conditions.
Press the Left or Right Navigation key or press the Volume keys to adjust the
brightness. Press the Save soft key or the key to save selection.
Backlight Time
In this menu, you can select the length of time for the Main LCD backlight On and the
Main LCD Dim.
• Main Display On: Settings available are: 15 seconds, 30 seconds, 1 minute, 3
minutes, and 10 minutes. Press the Save soft key or the
key to save selection.
57
Set Phone
• Main Display Dim: Settings available are: 15 seconds, 30 seconds, 1 minute, 3
minutes, and Off. Press the Save soft key or the key to save selection.
Keypad Light
The Keypad Light option allows the keypad to light Any Time, Night Time, or set to a
Custom Time. If you choose Custom Time the following options are enabled (After,
AM/PM, Until, AM/PM). Press the Save soft key to save your settings.
Front LCD Contrast
You can adjust the display brightness for the Front LCD to see it better in different
lighting conditions.
Press the Left or Right Navigation key or press the Up or Down Volume keys to
adjust the brightness. Press the Save soft key or the key to save selection.
Greeting Message
This menu allows you to set a greeting to be displayed briefly when the phone is
switched on.
For details about entering characters, see "Using Alphabet Mode" on page 32.
Network Selection (SIM Dependent)
The Network Selection feature enables you to automatically or manually select the
network used when roaming outside of your home area.
Note: You can select a network other than your home network only if there is a valid roaming agreement
between the two.
To indicate to automatically or manually select the network to be used when
roaming:
1. From the Set Phone menu screen, select Network Selection.
2. Press the Up or Down key until the appropriate option highlights, then
press the Select soft key or the
key.
If you select Automatic, you are connected to the first available network
when roaming.
If you select Manual, go to step 3.
3. Press the Up or Down key until the network you want highlights and then
press the Select soft key or the
key.
The phone will scan for that network and you will be connected.
Changing Your Settings
58
Airplane Mode
The Airplane Mode turns your handset off for incoming and outgoing calls.
TTY Settings*
TTY (also known as a TDD or Text Telephone) is a telecommunications device that
allows people who are deaf or hard of hearing, or who have speech or language
disabilities, to communicate via a telephone.
For more information, refer to "TTY Settings*" on page 86.
Set Calls
This menu option provides the options to answer a call, display a number, alerts and
notifications during calls.
General
Show My Number
You can prevent your phone number from being displayed on the phone of the
person being called.
Note: Some networks do not allow you to change this setting.
The following options are available:
• Set by Network: the default setting provided by the network is used.
• Hide Number: your number does not display on the other person’s phone.
• Show Number: your number is sent each time you make a call.
Press the Save soft key to apply changes.
Call Answer
The following options are available to answer a call on your handset.
• Flip Open: allows you to answer the call when you open the phone.
• Any Key: allows you to answer the call when you press any key.
Press the Save soft key to save the selection.
Call Status Tones
The Call Status Tone options are used to notify you for the Minute Minder or the
Connection Tone. Use the
key to enable or disable these functions. Press the
Save soft key to save the selection.
59
Set Calls
Alerts on a Call
Use this option to turn On or Off the Alerts on Call option. Press the
the Save soft key to save the settings.
key and press
Voice Call
Call Forwarding
This network service enables incoming calls to be rerouted to the number that you
specify.
Example: You may wish to forward your business calls to a colleague while you are on holiday.
To set your call forwarding options:
1. From the Voice Call menu, select Call Forwarding.
2. Select a call forwarding option by pressing the Up or Down key and then
press the Select soft key or the
key. The following options are
available:
• Forward Always: allows you to forward Voice Calls and Data Calls. Press the
Select soft key and press the Activate and enter the forwarding number. To
deactivate, follow the same steps and press the Deactivate soft key.
• Busy: allows you to forward Voice Calls and Data Calls to the designated
number instead of your voice mail number if you are on another phone call.
• No Reply: allows you to forward Voice Calls and Data Calls to the designated
number instead of your voicemail number when there is no answer on your
phone. You can choose the time setting from 5, 10, 15, 20, 25, and 30
seconds).
• Unreachable: calls are forwarded when you are not in an area covered by your
service provider or when your phone is switched off.
• Cancel All: all call forwarding options are canceled.
3. Select the call type, Voice Calls or Data Calls, by pressing the Up or
Down key, and then press the Select soft key or the
key.
4. Using the Left or Right Navigation key select Activate.
Select Deactivate to turn off call forwarding.
5. Scroll to Divert To, enter or change the number to be called.
To enter an international code, press the 0 key until the + sign displays.
6.
Press the Select soft key to save changes.
Changing Your Settings
60
Call Barring (SIM Dependent)
The call barring network service allows you to restrict your calls. This option is SIM
dependent and requires a subscription. For more information, contact your service
provider.
Call Waiting
This network service informs you when someone is trying to reach you during
another call.
You can specify individual call waiting options for voice calls and/or data calls.
To set your call waiting options:
1. From the Network Services menu screen, select Call Waiting.
2. Select the call type, Voice Calls or Data Calls, to which the call waiting
option is to be applied by pressing the Up or Down Navigation key and
then press the Select soft key or the
key.
The screen informs you whether call waiting is activated or deactivated.
Select Cancel All to cancel all call waiting features.
3. Using the Up or Down Navigation key you can Activate or Deactivate the
call waiting feature respectively.
4. Press the Select soft key to apply selection.
Auto Redial
This option allows you to turn On or Off the Auto Redial function. Press the Save soft
key to save the settings.
Bluetooth
Bluetooth is a short-range wireless communications technology capable of
exchanging information over a distance of about 30 feet without requiring a physical
connection.
Unlike infrared, you don't need to line up the devices to beam information with
Bluetooth. If the devices are within a range of one another, you can exchange
information between them, even if they are located in different rooms.
The Bluetooth wireless technology settings menu provides the ability to view and
change the device name, show the visibility, and set the security for the device.
Turn Bluetooth On/Off
When the Bluetooth is turned on, you can use the Bluetooth features available. When
the Bluetooth is turned off, you cannot send or receive information via Bluetooth. To
61
Set Applications
save battery life or in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology headset.
My Headsets
This menu provides a list of Bluetooth wireless technology devices discovered by
your handset.
1. Highlight My Headsets and press the Select soft key or the
key.
2. To search for the Bluetooth device(s), highlight Search New Headset and
press the Select soft key or the
key.
Connecting to a Bluetooth Device
From the Device list,
1. Highlight the device and press the Select soft key or the
key.
2. Enter the PIN for the device.
If connecting to a Bluetooth wireless device consult your Bluetooth device
user manual for your assigned PIN.
If connecting to another handset, enter the same user-defined PIN on both
handsets.
Note: The first time you try to pair with a handset, you and the owner of the other handset must enter the
same PIN. Once the handsets are paired, you will not need to use the PIN again.
3. Press the OK soft key or the
key.
4. If you are unable to pair with the device a popup appears in the display.
Press the Yes soft key to retry.
Bluetooth Services
Actually, the Bluetooth specification is a protocol that describes how the short-range
wireless technology works, whereas individual profiles describe the services
supported by individual devices. Profiles reduce the chance that different devices
will not work together.
Your phone supports the following profile services:
• Headset: enables outgoing and incoming calls.
• Handsfree: the remote car kit enables outgoing and incoming calls.
Set Applications
The Set Applications feature allows you to configure the functional parameters for
most of the on board applications. These applications are described in more detail
within other sections of this manual.
Changing Your Settings
62
1. When the Idle screen displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the
key.
3. Select Set Applications and press the Select soft key or the
key.
4. Select the type of application which you want to change.
• IM Settings (page 42)
• Messaging Settings (page 40)
• Browser Settings (page 82)
• Camera Settings (page 70)
• Record Audio Settings (page 73)
• Calendar Settings (page 75)
• Address Book Settings (page 45)
5. Press the Select soft key or the
key.
Security
The Security feature enables you to restrict the use of your phone by the others and
to restrict the types of calls.
Various codes and passwords are used to protect the features of your phone.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select Settings and press the Select soft key or the
key.
3. Select Security and press the Select soft key or the
key.
The following options are available. Use the Up or Down Navigation key to
scroll to and set options:
Lock Phone
When the Phone lock feature is enabled, the phone is locked and you must enter the
4- to 8-digit phone password each time the phone is switched on.
To change the phone password, see "Change Phone Password" on page 65.
Once the correct password has been entered, you can use the phone until you
switch it off.
The following options are available:
• Off: you are not asked to enter the phone password when you switch on the phone.
• On: you are required to enter the phone password when you switch on the phone.
63
Security
Lock SIM Card
When the Lock SIM Card feature is enabled, your phone only works with the current
SIM. You must enter the SIM lock code to unlock the SIM so you can use a different
SIM card.
Once you have entered the lock code, you are asked to confirm your password.
Reenter your password and press the OK soft key.
The following options are available:
• Off: you are not asked to enter the phone password when you switch on the phone.
• On: you are required to enter the phone password when you switch on the phone.
Check PIN Code
When the Check PIN Code feature is enabled, you must enter your PIN each time you
switch on the phone. Consequently, any person who does not have your PIN cannot
use your phone without your approval.
Note: Before disabling the PIN Check feature, you must enter your PIN.
The following options are available:
• Off: you must enter the PIN each time the phone is switched on.
• On: the phone connects directly to the network when you switch it on.
Lock Applications
Using this menu, you can lock the following categories:
• All
• Messaging
• Recent Calls
• Audio
• Graphics
• Address Book
Once you have locked the contents, you must enter the phone’s password to access
the associated menus.
Show Caller Information
This option allows you to display the caller information on the Front LCD as well as
the Main LCD.
Changing Your Settings
64
Set FDN Mode
Set FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to
restrict your outgoing calls to a limited set of phone numbers.
The following options are available:
• Off: you can call any number.
• On: you can only call phone numbers stored in Phone book. You must enter your
PIN2. The following options are available:
• Full length entries or wild cards can be entered in to the FDN list.
• A full length number with a specific contact name can be entered into the FDN
list.
• Wildcard entries allow a range of numbers to be dialed with a single entry: ex.
555 – All dialed numbers that begin with 555 will be allowed. Numbers that do
not match the conditions in the FDN list will be restricted. Note: Entering an
asterisk (*) is not required for wild card entries.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.
Change Phone Password
The Change Phone Password feature allows you to change your current phone
password to a new one. You must enter the current password before you can specify
a new one.
Once you have entered a new password, you are asked to confirm it by entering it
again.
Change PIN Code
This feature allows you to change your current PIN, provided that the PIN Check
feature is enabled. You must enter the current PIN before you can specify a new one.
Once you have entered a new PIN, you are asked to confirm it by entering it again.
Change PIN2 Code
The Change PIN2 Code feature allows you to change your current PIN2 to a new one.
You must enter the current PIN2 before you can specify a new one. Once you have
entered a new PIN2, you are asked to confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.
Reset Settings
You can easily reset your phone to its default settings. To reset your phone:
65
Memory Status
1. When the Idle screen displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the
key.
3. Select Reset Settings and press the Select soft key or the
key.
4. The following options are available. Use the Up or Down Navigation key to
scroll to and set options. Choose from the following:
• All
• Sound Settings
• Display Settings
• Phone Settings
5. Press the
key to make your selection by placing a checkmark adjacent
to the option and pressing the Reset soft key.
6. At the “Reset Settings?” prompt, press the Yes soft key to reset, or the
No soft key to cancel. Once your phone has been reset to its default
settings for those selected options, it will restart itself in order to
incorporate the new settings.
7. Enter your phone password, if prompted.
Note: To completely remove any personal information stored on your device, see "Precautions for Transfer
and Disposal" on page 110.
Memory Status
You can easily check the amount of memory being used for storing data, such as
messages, media, calendar data, or contacts entries. You can also delete any
selected information from your phone:
1. When the Idle screen displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the
key.
3. Select Memory Status and press the Select soft key or the
key.
4. use the Up or Down Navigation key to view the memory allocation for the
following options:
• Shared Memory
• Messaging
• My Stuff
• Address Book
Changing Your Settings
66
Section 9: Personal Assistant
Topics Covered
• Ringtones / Audio
• Graphics
• Memory Status
• Games & Apps
• Camera
• Tools
The topics covered in this section are audio, graphics, games, calendar, schedule
events, set an alarm, and perform simple math calculations.
Ringtones / Audio
The Ringtones / Audio menu option allows you to shop tones using the WAP browser.
You can download, record new, and save to your Downloaded Ringtones folder. To
access the Ringtones/Audio menu option, use the following steps:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Use the Navigation keys to highlight My Stuff and press the Select soft key
or the
key.
3. With the Ringtones / Audio option highlighted, press the Select soft key
or the
key.
4. Highlight the Shop Tones menu option to launch the WAP browser and
select a file to download. Follow the on-screen options. These files are
downloaded and stored in the Downloaded Audio folder.
5. From the Ringtone/Audio menu, highlight Default Ringtones to select
from the pre-loaded ringtones on your phone.
6. Highlight an available entry, press the Select soft key and select Set as to
save the selected ringtone as one of the following:
• Ringtone
• Caller Ringtone
• Alarm Tone
67
Graphics
7. Once you have chosen from one of the above options, press the Select soft
key or the
key.
8. At the “Set as Ringtone?” screen, press either the Yes soft key (to make
the assignment) or press the No soft key to cancel the selection and return
to the previous screen.
9. From the Ringtone/Audio menu, highlight the Record Audio option and
press
to record a personal audio file. After recording, press the Options
soft key to perform the following:
Graphics
The Graphics menu option allows you to shop graphics using the WAP browser. You
can download new, and save to your Downloaded Graphics folder. To access the
Graphics menu option, use the following steps:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Use the Navigation keys to highlight My Stuff and press the Select soft key
or the
key.
3. Highlight Graphics and press the Select soft key or the
key.
4. Highlight Shop Graphics menu option and press the Select soft key or the
key to launch the WAP browser and select a file to download. Follow
the on-screen options. These files are downloaded and stored in the
Downloaded Graphics folder.
5. From the Graphics menu, highlight My Photos to access the photos you
have taken with your phone and press the Select soft key or the
access list of photos.
key to
6. Highlight a photo from the list and press the Options soft key to access the
following options:
• View: allows you view the currently selected photo. Press the Options soft key
again and select to view the photo in Full Screen View.
• View by: allows you view the photos in the list in either a List view or as
Thumbnails.
• Send: allows you to send the photo via either Multimedia Message (MMS) or
to an ImageStation.
• Set as: allows you to assign the current image file as either a: Wallpaper or
Caller ID (where the photo is assigned to a selected contact for their Caller ID).
• Delete: deletes either the Selected file or All image files.
• Rename: allows you to rename the photo.
• Slide Show: allows you to view the My Photos folder images as a slide show in
either a Fast or Slow progression.
Personal Assistant
68
• Lock: allows you to lock the photo and prevent deletion.
• Properties: shows the Name, Date, Format, Resolution, Size, Quality, Lock/
Unlock.
7. From the Graphics menu, highlight Default Wallpapers to select from the
pre-loaded wallpaper on your phone.
8. Use the Navigation keys to view the available wallpapers and press the
Save soft key to set the wallpaper selection.
Memory Status
The Memory Status menu option allows you to view the usage and available memory
for My Stuff (Graphics & Audio), Games & Apps (Games & Camera), and Multimedia
Message (Used/Total) memory status for your text messages. To access the Memory
Status option, use the following steps:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Use the Navigation keys to highlight My Stuff and press the Select soft key
or the
key.
3. Highlight the Memory Status menu option and press the Select soft key.
Choose from My Files or Calendar.
4. Press the Back soft key to return to the Memory Status menu.
Games & Apps
The Games & Apps menu option allows you to shop games using the WAP browser.
You can download new, and save to the My Games & Apps folder. To access the
Games & Apps menu option, use the following steps:
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Use the Navigation keys to highlight Games & Apps and press the Select
soft key or the
key.
3. With the Shop Games option highlighted, press the Select soft key or the
key to launch the WAP browser and select a file to download. Follow
the on-screen options. The files downloaded will be stored in the My
Games folder.
4. To access a pre-installed game, highlight My Games & Apps and press
the
69
key. Select a game and press the
key.
Camera
Camera
Taking Photos
Note: When taking a photo in direct sunlight or in bright conditions, shadows may appear on the photo.
1. In Idle mode, press and hold the
key to turn on the camera.
Alternatively, in Idle mode, press the Menu soft key to access Menu mode.
Use the Navigation keys to highlight My Stuff and press the Select soft
key or the
key. Select Applications.
Use the Up or Down Navigation key to highlight Camera and press the
Select soft key or the
key.
2. Press the
key to take the photo.
Note: Your camera produces photos in JPEG format.
3. Or before taking the photo, press the Options soft key to access camera
options.
Camera Options
• Shooting Mode: allows you to take a photo in various modes. Once you change
the mode, the corresponding indicator appears at the top right of the display.
• Take and Review: allows you to take a photo and view it before returning to
the shooting mode. Press the Options soft key to view the following options:
• Take and Return: allows you to take a photo and return to the viewfinder to
take another photo.
• Effects: allows you to choose a custom color tone for your photo. Choose from the
following Effects Mode.
• No Effects: automatically adjust the picture for the best quality available.
• Black & White: removes all color and display the picture as black and white.
• Negative: changes the image to a negative image display.
• Sepia: adds a sepia tint to the picture. This is the common orange tint that was
popular in early photography.
• Emboss: changes to reflect raised images.
• Sketch: changes the image to appear like a sketch drawing.
• Aqua: changes the image to appear with a blue effect.
• Timer: allows you to set a time delay before the camera takes the photo.
• Off
• 3 Seconds
• 5 Seconds
Personal Assistant
70
• 10 Seconds
• Go to My Photos: allows you to view the photos you have previously taken.Press
the Options soft key to choose from the following:
• View: allows you to view the highlighted photo.
• View by: allows you to choose the viewing options by List or Thumbnails.
• Send : allows you to send the photo via Multimedia Message or to
ImageStation®
• Set as Wallpaper: allows you to set the photo as your wallpaper.
• Set as Caller ID: allows you to set the photo as a Caller ID for a contact.
• Delete: allows you to delete the photo you have taken.
• Rename: allows you to rename the photo.
• Slide Show: allows you to show your photos as a Fast or Slow slide show.
• Lock: allows you to lock the photo to prevent deletion.
• Properties: allows you to view the properties for this photo.
• Camera Settings: allows you to customize your camera settings. Choose the
following options:
• Function
• Size: allows you to set the image size. The icon for the selected image size
appears on the capture screen
• Quality: allows you to select the picture quality setting. Choose from Super
Fine, Fine, or Normal.
• Viewfinder Mode: allows you to choose between Full screen, Full Screen
& Indicator, Full Screen & Guidelines, Actual Screen.
• Scene Program: allows you to choose from Normal, or Night-time
Landscape.
• Exposure Metering: allows you to choose the exposure for the photo, choose
from Matrix and Center-weighted.
• White Balance: allows you to choose the white balance for the photo,
choose from Automatic, Daylight, Incandescent, Flourescent, or
Cloudy.
4. Press the Save soft key to save the settings, or press the Cancel soft key
to return to the picture viewer.
• Set Up
• Shutter Sound: allows you to select a shutter tone sound when taking a photo.
• Zoom Sound: allows you to turn On or Off the Zoom sound.
• Brightness Sound: allows you to turn On or Off the change to the brightness.
• Default Name: allows you to enter an name of the photo.
You can use the keypad to quickly change the camera options using the camera
shortcut keys.
71
Camera
Camera Shortcuts
Shortcut keys, allows you to change options using your keypad, Navigation keys,
and Volume key in capture mode. The following options are available.
takes photo.
adjust the image brightness.
zooms in or out.
zooms in.
zooms out.
changes the image size.
changes the image quality.
changes the camera shooting mode.
changes the color tone of the photo.
changes the white balance.
sets a time delay (Off, 3, 5, or 10 seconds).
Camera Options after a Photo is Taken
After you have taken a photo, you can use various options by pressing the Options
soft key. Highlight an option and press the Select soft key or the
key. The
following options are available:
• Take Another: launches the viewfinder and allows you to take another photo.
®
• Send: allows you to send the photo in an MMS message or to ImageStation .
• Set as: allows you to set the photo as your wallpaper or as a Caller ID for a contact.
• Delete: allows you to delete the photo you have taken.
• Rename: allows you to rename the photo.
• Go to My Photos: allows you to view photos you have previously taken.
• Lock: allows you to lock the photo to prevent deletion.
• Properties: allows you to view the properties for this photo.
Personal Assistant
72
Accessing the Photos Folder
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Use the Navigation keys to highlight My Stuff and press the Select soft key
or the
key.
3. Highlight Graphics and press the Select soft key or the
key.
4. Use the Up or Down Navigation key to select the My Photos folder press
the Select soft key or the
key.
Record Audio
Record Audio allows you to record voice memos. It also allows you to send your
audio clip to other people as an attachment of an MMS message. Recording time is
limited to free memory space available.
1. In Idle mode, press the Menu soft key to access menu mode.
2. Use the Navigation keys to highlight My Stuff and press the Select soft key
or the
key.
3. Select Ringtones / Audio and press the Select soft key or the
4. Highlight Record Audio and press the Select soft key or the
5. Press the Options soft key to start recording, or press the
key.
key.
key. Record
a memo by speaking into the microphone.
6. Press the
to stop the recording.
If the recording time expires, the message is automatically saved. Press
the Save soft key to display the following options:
• Record: allows you to record another.
• Go to Recorded Audio: allows you to go to the recorded memos.
• Send via Multimedia Message: allows you to send your memo to other
people by using MMS.
• Set as: allows you to set the audio recording as a Ringtone, Caller Ringtone, or
an Alarm Tone.
• Delete: allows you to delete the memo.
• Rename: allows you to change the memo’s name.
• Lock: allows you to lock or unlock the recorded audio file.
• Properties: displays the Name, Date, Format, Length, Size, and Lock/Unlock of
the voice memo.
7. To exit, press the Back soft key or the
key.
73
Camera
Recorded Audio
This menu shows a list of saved voice memos. When a voice memo is recorded and
saved, it is stored in the Recorded Audio folder. To access this menu use the
following steps:
1. In Idle mode, press the Menu soft key to access menu mode.
2. Select My Stuff and press the Select soft key or the
key. Higlight
Ringtones / Audio and press the Select soft key.
3. Highlight Recorded Audio and press the Select soft key or the
key.
4. Use the Up or Down Navigation key to select a recorded memo.
5. A list of voice memos displays. To play a recording, press the
6. To exit, press the Back soft key or the
soft key.
key.
Alarm
This feature allows you to:
• set the alarm to ring at a specific time.
• set the phone to switch on automatically and ring the alarm even if the phone is
switched off.
To set the alarm:
1. In Idle mode, press the Menu soft key to access the menu mode.
2. Select My Stuff and press the Select soft key or the
Applications and press the Select soft key or the
key. Highlight
key.
3. Highlight Alarm and press the Select soft key or the
key. The following
options display:
• Wake-up Alarm: the alarm rings to wake you up at the specified time.
• Alarm 1: primary alarm setting.
• Alarm 2: secondary alarm setting.
• Auto Power Up: the alarm rings even when the phone is turned off.
4. Select an alarm type and press the Select soft key or the
key. Set the
following options:
• Alarm: use the Left or Right Navigation key to turn the Alarm On or Off.
Note: Your phone is preset to a 12-hour format. To change the time format, see "Set Time & Date" on page
56.
• Alarm Time: use the alphanumeric keypad enter a time for the alarm to sound.
• AM/PM: use the Left or Right Navigation key to select AM or PM.
Personal Assistant
74
• Alarm Day: press the
key to access the Alarm Day screen. To set the days
of the week you wish your alarm to sound, use the Up or Down Navigation keys
to select the day and press the
to mark the day. Press the OK soft key to
save the changes.
• Alarm Tone: press the
key to access the Alarm Tone screen. To set the
Alarm Tone, use the Up or Down Navigation key to select the tone. Press the
Select soft key or the
key to make your selection.
• Snooze: use this option to turn on and set the snooze interval. Choose from Off,
1 Min, 3 Min, 5 Min, 7 Min, or 10 Min.
• Repeat: use this option to set the repeat intervals. Choose from 1, 2, 3,5, or 10.
5. Press the Save soft key to save changes.
Note: To stop the alarm when it rings, open the phone and press any key.
Note: Press the OK soft key Confirm to turn off the alarm, press Snooze soft key to silence the phone for 5
minutes.
Setting Auto Power Alarms
You can set the phone to ring the alarm when the time for an alarm comes, if the
phone is switched off.
1. In Idle mode, press the Menu soft key to access menu mode.
2. Select My Stuff and press the Select soft key or the
Applications and press the Select soft key or the
3. Highlight Alarm and press the Select soft key or the
key. Highlight
key.
key. Select Auto
Power Up and press the Select soft key.
4. Using the Up or Down Navigation key, highlight On and press the Save soft
key or the
key to activate the Autopower feature.
If the menu option is set to Off, and the phone is switched off at the
specified time, the alarm does not ring.
5. When you have finished, press the
key.
Calendar
The calendar feature allows you to view the Month, Week, and Day layout views. You
can also create Appointment, Anniversary, and Miscellaneous Task entries. It also
shows any Missed Alarm Events that have occurred. To access the Calender menu,
use the following steps:
1. In Idle mode, press the Menu soft key to access menu mode.
75
Camera
2. Select My Stuff and press the Select soft key or the
Applications and press the Select soft key or the
key. Highlight
key.
3. Highlight Calendar and press the Select soft key or the
key.
4. Press the Options soft key and highlight Create. Highlight the entry and
press the Select soft key or the
key. Enter text in theselected screen
and enter the appropriate information for that selection screen press the
Save soft key. The following options are available:
Appointment
To schedule an appointment use the following options:
• Subject: enter the Memo subject using the keypad.
• Details: enter the appointment details.
• Start Date: enter the start date for the appointment
• Start Time: enter the start time for the appointment.
• AM/PM: use the Left or Right Navigation key to select AM or PM for the start
time of the scheduled event and press the Save soft key.
• End Date: enter the end date for the appointment.
• End Time: enter the end time for the appointment.
• AM/PM: use the Left or Right Navigation key to select AM or PM for the start
time of the scheduled event and press the Select soft key.
• Location: enter the location of the appointment.
• Alarm: allows you to set an alarm for this event. Press the
key to enter an
alarm time in the before field, enter the time increment you wish for the alarm
to sound prior to the appointment. Choose from min, hour, day, or week.
• Alarm Tone: allows you to choose from 4 pre-loaded alarm tones. Press the
Select soft key.
• Repeat: in this field, choose to repeat the alarm every Day, every Week, or every
Month. In the until field, enter the date you wish the alarm to stop.
5. When you have finished, press the Save soft key.
Anniversary
To schedule an anniversary use the following options:
• Occassion: enter the Anniversary Occasion.
• Date: enter the Anniversay Date.
• Alarm: allows you to set an alarm for this event. Press the
key to enter an
alarm time. In the before field, enter the time increment you wish for the alarm
to sound prior to the appointment. Choose from day or week.
• Alarm Time: enter the Alarm Time using the keypad and press the Save soft
key.
Personal Assistant
76
• AM/PM: use the Left or Right Navigation key to select AM or PM for the start
time of the scheduled event and press the Select soft key.
• Alarm Tone: allows you to choose from 4 pre-loaded alarm tones. Press the
Save soft key.
• Repeat Every Year: press the
key to repeat this anniversary reminder
every year.
When you have finished, press the Save soft key.
Miscellaneous
To schedule an event use the following options:
• Subject: enter the Subject using the keypad.
• Details: enter the details applicable to the miscellaneous entry.
• Start Date: enter the start date for the miscellaneous entry.
• Start Time: enter the start time for the miscellaneous entry.
• AM/PM: use the Left or Right Navigation key to select AM or PM for the start
time of the scheduled event and press the Save soft key.
• End Date: enter the end date for the miscellaneous entry.
• End Time: enter the end time for the miscellaneous entry.
• AM/PM: use the Left or Right Navigation key to select AM or PM for the end
time of the scheduled event and press the Save soft key.
• Alarm: allows you to set an alarm for this event. Press the
key to enter an
alarm time in the before field, enter the time increment you wish for the alarm
to sound prior to the appointment. Choose from min, hour, day, or week.
• Alarm Tone: allows you to choose from 4 pre-loaded alarm tones. Press the
Select soft key.
6. When you have finished, press the Save soft key.
Task
To schedule an task use the following options:
• Task: enter the task using the keypad.
• Start Date: enter the start date for the task entry.
• Due Date: enter the date the task is due.
• Priority: enter the priority of the task, choose from High, Normal, or Low.
• Alarm: allows you to set an alarm for this task. Press the
key to enter an
alarm time. In the before field, enter the time increment you wish for the alarm
to sound prior to the task. Choose from day or week.
• Alarm Time: enter the Alarm Time using the keypad and press the Save soft
key.
• AM/PM: use the Left or Right Navigation key to select AM or PM for the end
time of the task and press the Save soft key.
77
Tools
• Alarm Tone: allows you to choose from 4 pre-loaded alarm tones. Press the
Save soft key.
7. When you have finished, press the Save soft key.
Event Options
The following options display when pressing the Options soft key after setting an
event.
• View: allows you to view the details of the event.
• Create: allows you to create a new event.
• Send via: allows you to send the event via Text Message or
Multimedia Message.
• View by: allows you to view events by Month, Week or Day.
• Delete: this option allows you to delete the Selected event or All from the
calendar.
Viewing an Event
1. In Idle mode, press the Menu soft key to access menu mode.
2. Select My Stuff and press the Select soft key or the
Applications and press the Select soft key or the
key. Highlight
key.
3. Highlight Calendar and press the Select soft key or the
key.
The calendar displays with today date highlighted.
4. Select the date of the event (s) you want to view and press the
key or
use the Navigation keys to move to the date with an assigned event.
Note: The icon categories displayed at the bottom display any events scheduled for the day you selected.
5. Press the Up or Down Navigation key to scroll to the previous or next
event.
6. When you have finished, press the
key.
Tools
The Tools menu includes the calculator, converter, timer, stopwatch, and world time
clock. To access this menu, use the following steps:
1. In Idle mode, press the Menu soft key to access menu mode.
2. Select My Stuff and press the Select soft key or the
Applications and press the Select soft key or the
3. Highlight Tools and press the Select soft key or the
key. Highlight
key.
key.
The following menu items are displayed.
Personal Assistant
78
Calculator
With this feature, you can use the phone as a calculator. The calculator provides the
basic arithmetic functions; addition, subtraction, multiplication, and division.
1. Highlight Calculator and press the Select soft key or the
key.
2. Enter the first number using the numeric keys.
Note: To include a decimal point or a bracket, press the left soft key until the symbol you want displays.
3. Enter the operation for your calculation by pressing the Navigation keys,
according to the illustration on the display.
4. Enter the second number.
5. To view the result, press the
key.
Converter
The conversion menu provides the following conversion categories:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
Tip Calculator
This tool provides an amount based upon the input entered into the following fields.
• Bill: enter the total bill amount.
• Tip(%): enter the percentage of tip.
• Tip($): the amount based upon the tip percentage and the # paying is populated.
• You pay: the amount you pay for total bill plus your tip amount.
Timer
You can use this menu to set a countdown timer. To enable the Timer, use the
following options:
1. Press the Set soft key to enter the length of time.
2. Enter the time and press the OK soft key.
3. Press the
79
key to start the timer. Press the
key to stop the timer.
Tools
Stopwatch
You can use this menu to measure intervals of time for 4 separate times. Press the
key to start the stopwatch. Press the
to stop the stopwatch. Press the Reset
soft key to erase all times recorded.
World Time
World Time allows you to view the time of day or night in another parts of the world.
World displays time in the 30 different time zones around the world.
1. Highlight World Time and press the Select soft key or the
key.
2. Use the Left or Right Navigation keys to browse cities and times.
3. Press the
key to set the city or area as the new time zone. The
displayed time will shift to reflect the time zone selected.
4. Press the Options soft key and highlight Apply Daylight Saving Time.
Press the Select soft key and make your selection by pressint the
Press the Save soft key.
Personal Assistant
key.
80
Section 10: WAP
Topics Covered
• Launching the WAP Browser
• Access a WAP Site
• Navigating the WAP Browser
• Using Favorites
• Downloading Multimedia Files
• Clearing the Cache
Your phone is equipped with a WAP (Wireless Application Protocol) browser which
allows you to access Internet specified for mobile phones. This section explains how
to access the WAP services of your service provider and navigate the WAP browser.
Launching the WAP Browser
1. In Idle mode, press the
key to launch the WAP browser. You can also
press the Menu soft key to access menu mode and highlight MEdia Net
and press the Select soft key then the
key.
2. Select MEdia Net Home and press the Select soft key or the
key. Your
phone is connected to the network and loads the homepage of the
Wireless Web service provider. The content of the start-up homepage
depends on your Wireless Web service provider.
3. To scroll through the screen, use the Up and Down navigation keys.
4. To exit the browser at any time, simply press the
key.
Access a WAP Site
There are several ways to access a WAP site:
• Selecting a link on the browser
• Using a bookmark item in the Favorites folder; use the Bookmarks option on the
browser menu list or Favorites menu.
• Entering a URL address manually; use the Go to URL option on the browser menu
list.
81
Navigating the WAP Browser
Navigating the WAP Browser
1. To scroll through browser items, press the Up or Down navigation keys.
2. To select a browser item, press the
key or press the Options soft key
and choose Select.
3. To return to the previous page, press the
key, or press the Options soft
key and choose Back.
4. To access the browser menu list, press the Menu soft key.
5. To return to the start-up homepage, press the Menu soft key and select the
MEdia Net Home option.
Entering Text in the WAP Browser
When you are prompted to enter text, the currently active text input mode is
indicated on the screen. To change the text input mode, press the
key one or
more times.
The following modes are available:
Upper-Case Alphabet Mode (A): allows you to enter upper-case characters.
Lower-Case Alphabet Mode (a): allows you to enter lower-case characters.
Note: You can enter symbols in upper or lower case alphabet mode by pressing the 1 key.
T9 Mode (T9): allows you to enter characters by pressing one key per letter. In this
mode, you can use only the 0 key to display alternative words. To change case,
press the * key.
Number Mode (1): allows you to enter numbers.
Selecting and Using Menu Options
Various menus are available when you are using the WAP Browser to navigate the
Wireless Web.
1. In Idle mode, press the
key to launch the WAP browser. You can also
press the Menu soft key to access menu mode and highlight MEdia Net
and press the Select soft key or the
key.
Note: The menus may vary, depending on your version of the WAP Browser.
WAP
82
2. To access a menu option, press the Menu soft key to display the following
list of options:
• Enter URL: allows you to manually enter the URL address of a WAP site. After
entering an address, press the Select soft key to go there directly.
• Go to Favorites: shows the bookmarks list. You can bookmark the current
page or access previously bookmarked pages.
• Go to Messaging: takes you to the Messages menu where you can choose to
either create a new text message (using the WAP server) or access messages
from one of the available folders: Inbox, Sent, Outbox, Draft, or My Folder.
• Go to My Stuff: takes you to the My Stuff menu. For more information, refer to
"Personal Assistant" on page 67.
• MEdia Net Home: takes you back at any time to the homepage of the Wireless
Web service provider.
• Back: reloads the Media Net Home page.
• Show URL: displays the URL address of the page to which you are currently
connected. It also enables you to set the current site as the startup homepage.
• Reload: reloads the current page.
Using Favorites
While navigating the WAP browser, you can bookmark the site to quickly and easily
access it at a future time. The URL addresses of the bookmarked sites are stored in
the Favorites folder, wherein you can use the 4-preset URL addresses and store your
favorite URL addresses.
Accessing a WAP Site Using Favorites
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight MEdia Net and press the Select soft key or the
key.
3. Select Favorites.
4. Select a bookmark item on the Favorite list.
Storing a URL Address
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select MEdia Net and press the Select soft key or the
3. Select Favorites.
4. Select an <Empty> location, and press the
83
5. Enter the name and URL and press
key.
6. When you have finished, press the
key.
soft key.
key.
Downloading Multimedia Files
Editing a Bookmark
1. From the Favorites list, select the bookmark you want to change.
2. Select Options and select Edit.
3. Change the address and the name, as you would when storing a new one.
4. Press the
soft key.
5. When you have finished, press the
key.
Deleting a Bookmark
1. From the Favorites list, select the bookmark you want to delete.
2. Select Options and select Delete.
3. Use the Navigation key to choose from Selected. Press the Select soft key.
4. Press the Yes soft key or the
key to confirm the deletion.
5. When you have finished, press the
key.
Downloading Multimedia Files
You can buy a variety of multimedia files, such as ringtones, graphics, applications,
Multimedia contents, and so on from the WAP browser and download them to your
phone’s memory. Your phone has embedded links to the WAP sits providing you with
download services, preset by your service provider.
1. In Idle mode, press the Menu soft key to access Menu mode and select
AT&T Mall.
2. Highlight Shop Tones, Shop Games, Shop Graphics, Shop Multimedia,
Shop Applications, or Shop Themes, depending on the type of items you
want to buy.
• To access homepage of the online shopping mall, select MEdia Net Home.
3. Find the item you want to download and follow the on-screen instructions
to purchase it.
Note: This content is delivered to you in Multimedia messages. You can retrieve the messages from the
server and then save the items in your phone’s memory. you cannot forward these messages to other
people or add the saved items to a Multimedia message.
WAP
84
Clearing the Cache
The cache is the phone’s temporary memory in which the most recently accessed
WAP pages are stored. You can clear the cache at anytime.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight MEdia Net and press the Select soft key or the
key.
3. Select Clear Cache.
4. Press the Yes soft key or the
key to confirm the deletion.
5. When you have finished, press the
key.
Changing the WAP Profiles
You can set up server profiles for the WAP browser.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Select MEdia Net. Highlight Browser Profiles and press the Select soft
key or the
key.
3. Highlight Profile Settings and press the Select soft key or the
key.
4. Select the profile you want.
For each profile, the following options are available:
• Profile Name: enter a name that you wish to assign to the HTTP proxy server.
• Home URL: set the address of your startup homepage. When the default
homepage displays, you can delete it using the key and enter your own
choice.
• Proxy use: place a check in the box to use the proxy server.
• GPRS setting: allows you to choose from the following options:
- Proxy Address: enter the Proxy address of the proxy server.
- Proxy Port: enter a port number or use default setting.
- APN: enter the access point name used for the address of the GPRS network
gateway.
- Login ID: enter the User ID required to connect to the GPRS network.
- Password: enter the password required to connect to the GPRS network.
Note: The WAP settings may vary depending on the service provider.
85
TTY Settings*
Section 11: Accessibility
Topics Covered
• TTY Settings
TTY Settings*
TTY (also known as a TDD or Text Telephone) is a telecommunications device that
allows people who are deaf or hard of hearing, or who have speech or language
disabilities, to communicate via a telephone.
Use the following steps to access the TTY settings:
1. Obtain a TTY device with a compatbile Samsung connector. For more
information on insertion and connection, see "Charging a Battery" on
page 6.
2. Temporarily remove the plastic Power Interface Connector/headset cover,
located on the side of the phone.
3. Plug the TTY device’s connector into the connector jack to enable the TTY
Mode.
4. Remove th TTY device’s connector from the phone’s connector jack to
disable the TTY Mode.
For additional technical support you may access the following website or call
1-888-987-4357.
http://www.samsungtelecom.com/contact_us/accessibility.asp
Accessibility
86
Section 12: Health and Safety Information
Topics Covered
• Health and Safety Information
• Samsung Mobile Products and Recycling
• UL Certified Travel Adapter
• Consumer Information on Wireless Phones
• Road Safety
• Responsible Listening
• Operating Environment
• Using Your Phone Near Other Electronic Devices
• Potentially Explosive Environments
• Emergency Calls
• FCC Notice and Cautions
• Other Important Safety Information
• Product Performance
• Availability of Various Features/Ring Tones
• Battery Standby and Talk Time
• Battery Precautions
• Care and Maintenance
This section outlines the safety precautions associated with using your phone. These
safety precautions should be followed to safely use your phone.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the exposure limits for radio frequency (RF) energy set
by the Federal Communications Commission (FCC) of the U.S. government.
Health and Safety Information
87
Health and Safety Information
These FCC exposure limits are derived from the recommendations of two expert
organizations, the National Counsel on Radiation Protection and Measurement
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases,
the recommendations were developed by scientific and engineering experts drawn
from industry, government, and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of
the rate of absorption of RF energy by the human body expressed in units of watts
per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit
of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a
substantial margin of safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions accepted by the FCC
with the phone transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power level, the
actual SAR level of the phone while operating can be well below the maximum value.
This is because the phone is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in positions and locations (e.g. at
the ear and worn on the body) as required by the FCC. For body worn operation, this
phone has been tested and meets FCC RF exposure guidelines when used with an
accessory that contains no metal and that positions the handset a minimum of
1.5 cm from the body. Use of other accessories may not ensure compliance with FCC
RF exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile phone with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. The maximum SAR values for this model phone as reported to the FCC
are:
Health and Safety Information
88
GSM
850
• Head: 0.721 W/Kg.
• Body-worn: 1.24 W/Kg.
1900
• Head: 1.11 W/Kg.
• Body-worn: 0.765 W/Kg.
SAR information on this and other model phones can be viewed on-line at
http://www.fcc.gov/oet/ea. To find information that pertains to a particular model
phone, this site uses the phone FCC ID number which is usually printed somewhere
on the case of the phone.
Sometimes it may be necessary to remove the battery pack to find the number. Once
you have the FCC ID number for a particular phone, follow the instructions on the
website and it should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be obtained at
www.fcc.gov/cgb/sar.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its customers to recycle
Samsung mobile phones and genuine Samsung accessories.
Go to: http://www.samsungwireless.com/recycling.asp for more information.
UL Certified Travel Adapter
The Travel Adaptor for this phone has met UL 1310 safety requirements. Please
adhere to the following safety instructions per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW
THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN ATTACHMENT
PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. THIS
POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
89
Consumer Information on Wireless Phones
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a series of Questions
and Answers for consumers relating to radio frequency (RF) exposure from wireless
phones. The FDA publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with built-in
antennas, often called "cell," "mobile," or "PCS" phones. These types of wireless
phones can expose the user to measurable radio frequency energy (RF) because of
the short distance between the phone and the user's head. These RF exposures are
limited by Federal Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health and safety agencies.
When the phone is located at greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure decreases rapidly with increasing
distance from the source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at far lower power
levels, and thus produce RF exposures well within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are
associated with using wireless phones. There is no proof, however, that wireless
phones are absolutely safe. Wireless phones emit low levels of radio frequency
energy (RF) in the microwave range while being used. They also emit very low levels
of RF when in the stand-by mode. Whereas high levels of RF can produce health
effects (by heating tissue), exposure to low level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies have suggested that
some biological effects may occur, but such findings have not been confirmed by
additional research. In some cases, other researchers have had difficulty in
reproducing those studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation-emitting consumer
products such as wireless phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level that is hazardous to
the user.
Health and Safety Information
90
In such a case, FDA could require the manufacturers of wireless phones to notify
users of the health hazard and to repair, replace or recall the phones so that the
hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory actions, FDA has
urged the wireless phone industry to take a number of steps, including the following:
• Support needed research into possible biological effects of RF of the type emitted
by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to the user that
is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible information
on possible effects of wireless phone use on human health.
FDA belongs to an interagency working group of the federal agencies that have
responsibility for different aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group
activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal
Communications Commission (FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA
and other health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone networks rely upon.
While these base stations operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless phones. Base
stations are thus not the primary subject of the safety questions discussed in this
document.
91
Consumer Information on Wireless Phones
What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have
suffered from flaws in their research methods. Animal experiments investigating the
effects of radio frequency energy (RF) exposures characteristic of wireless phones
have yielded conflicting results that often cannot be repeated in other laboratories. A
few animal studies, however, have suggested that low levels of RF could accelerate
the development of cancer in laboratory animals. However, many of the studies that
showed increased tumor development used animals that had been genetically
engineered or treated with cancer-causing chemicals so as to be pre-disposed to
develop cancer in absence of RF exposure. Other studies exposed the animals to RF
for up to 22 hours per day. These conditions are not similar to the conditions under
which people use wireless phones, so we don't know with certainty what the results
of such studies mean for human health.
Three large epidemiology studies have been published since December 2000.
Between them, the studies investigated any possible association between the use of
wireless phones and primary brain cancer, glioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful health effects from wireless
phones RF exposures. However, none of the studies can answer questions about
long-term exposures, since the average period of phone use in these studies was
around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people actually
using wireless phones would provide some of the data that are needed. Lifetime
animal exposure studies could be completed in a few years. However, very large
numbers of animals would be needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide data that is directly
applicable to human populations, but ten or more years' follow-up may be needed to
provide answers about some health effects, such as cancer. This is because the
interval between the time of exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in measuring actual RF exposure
during day-to-day use of wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which model of phone is used.
Health and Safety Information
92
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of
investigators around the world to ensure that high priority animal studies are
conducted to address important questions about the effects of exposure to radio
frequency energy (RF).
FDA has been a leading participant in the World Health Organization international
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result
of this work has been the development of a detailed agenda of research needs that
has driven the establishment of new research programs around the world. The
Project has also helped develop a series of public information documents on EMF
issues.
FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal
Cooperative Research and Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations. CTIA-funded research
is conducted through contracts to independent investigators. The initial research will
include both laboratory studies and studies of wireless phone users. The CRADA will
also include a broad assessment of additional research needs in the context of the
latest research developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not know that there is
- it is probably very small. But if you are concerned about avoiding even potential
risks, you can take a few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone every day, you
could place more distance between your body and the source of the RF, since the
exposure level drops off dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or use a wireless
phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are harmful. But if
you are concerned about the RF exposure from these products, you can use
measures like those described above to reduce your RF exposure from wireless
phone use.
93
Consumer Information on Wireless Phones
What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones,
including children and teenagers. If you want to take steps to lower exposure to
radio frequency energy (RF), the measures described above would apply to children
and teenagers using wireless phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national governments have advised that children
be discouraged from using wireless phones at all. For example, the government in
the United Kingdom distributed leaflets containing such a recommendation in
December 2000. They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to limit wireless
phone use by children was strictly precautionary; it was not based on scientific
evidence that any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that hands-free kits reduce risks. Hands-free
kits can be used with wireless phones for convenience and comfort. These systems
reduce the absorption of RF energy in the head because the phone, which is the
source of the RF emissions, will not be placed against the head. On the other hand, if
the phone is mounted against the waist or other part of the body during use, then
that part of the body will absorb more RF energy. Wireless phones marketed in the
U.S. are required to meet safety requirements regardless of whether they are used
against the head or against the body. Either configuration should result in
compliance with the safety limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that accessories that claim to shield the head
from those emissions reduce risks. Some products that claim to shield the user from
RF absorption use special phone cases, while others involve nothing more than a
metallic accessory attached to the phone. Studies have shown that these products
generally do not work as advertised. Unlike "hand-free" kits, these so-called
"shields" may interfere with proper operation of the phone. The phone may be
forced to boost its power to compensate, leading to an increase in RF absorption.
Health and Safety Information
94
In February 2002, the Federal trade Commission (FTC) charged two companies that
sold devices that claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims. According to FTC, these defendants
lacked a reasonable basis to substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact with some electronic
devices. For this reason, FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This standard will allow
manufacturers to ensure that cardiac pacemakers and defibrillators are safe from
wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This
standard specifies test methods and performance requirements for hearing aids and
wireless phones so that no interference occurs when a person uses a compatible
phone and a compatible hearing aid at the same time. This standard was approved
by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible interactions with
other medical devices. Should harmful interference be found to occur, FDA will
conduct testing to assess the interference and work to resolve the problem.
Additional information on the safety of RF exposures from various sources can be
obtained from the following organizations (Updated 12/1/2006):
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
• National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/homepage.html
• World Health Organization (WHO):
http://www.who.int/peh-emf/
95
Road Safety
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.hpa.org.uk/radiation
• US Food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to communicate by voice, almost
anywhere, anytime. But an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using your wireless
phone behind the wheel of a car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such as speed dial and
redial. If available, these features help you to place your call without taking
your attention off the road.
2. When available, use a hands-free device. If possible, add an additional
layer of convenience and safety to your wireless phone with one of the
many hands free accessories available today.
3. Position your wireless phone within easy reach. Be able to access your
wireless phone without removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions. Rain,
sleet, snow, ice and even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while driving. Jotting down a
"to do" list or flipping through your address book takes attention away
from your primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls when you are
not moving or before pulling into traffic. Try to plan calls when your car will
be stationary. If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then continue.
Health and Safety Information
96
7. Do not engage in stressful or emotional conversations that may be
distracting. Make people you are talking with aware you are driving and
suspend conversations that have the potential to divert your attention from
the road.
8. Use your wireless phone to call for help. Dial 9-1-1 or other local
emergency number in the case of fire, traffic accident or medical
emergencies. Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If you see an auto
accident, crime in progress or other serious emergency where lives are in
danger, call 9-1-1 or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency wireless assistance
number when necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency number.
"The wireless industry reminds you to use your phone safely when driving."
For more information, please call 1-888-901-SAFE, or visit our web-site
www.wow-com.com.
Provided by the Cellular Telecommunications & Internet Association.
Responsible Listening
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud sounds over time. The
risk of hearing loss increases as sound is played louder and for longer durations.
Prolonged exposure to loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that using portable
audio devices, such as portable music players and cellular telephones, at high
volume settings for long durations may lead to permanent noise-induced hearing
loss. This includes the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound has also been
associated in some studies with tinnitus (a ringing in the ear), hypersensitivity to
sound and distorted hearing.
Individual susceptibility to noise-induced hearing loss and potential hearing problem
varies. Additionally, the amount of sound produced by a portable audio device varies
97
Responsible Listening
depending on the nature of the sound, the device settings, and the headphones that
are used. As a result, there is no single volume setting that is appropriate for
everyone or for every combination of sound, settings and equipment.
You should follow some commonsense recommendations when using any portable
audio device:
• Set the volume in a quiet environment and select the lowest volume at which you
can hear adequately.
• When using headphones, turn the volume down if you cannot hear the people
speaking near you or if the person sitting next to you can hear what you are
listening to.
• Do not turn the volume up to block out noisy surroundings. If you choose to listen
to your portable device in a noisy environment, you noise-cancelling headphones
to block out background environmental noise. By blocking background
environment noise, noise cancelling headphones should allow you to hear the
music at lower volumes than when using earbuds.
• Limit the amount of time you listen. As the volume increases, less time is required
before you hearing could be affected.
• Avoid using headphones after exposure to extremely loud noises, such as rock
concerts, that might cause temporary hearing loss. Temporary hearing loss might
cause unsafe volumes to sound normal.
• Do not listen at any volume that causes you discomfort. If you experience ringing in
your ears, hear muffled speech or experience any temporary hearing difficulty
after listening to your portable audio device, discontinue use and consult your
doctor.
You can obtain additional information on this subject from the following sources:
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: info@audiology.org
Internet: www.audiology.org
Health and Safety Information
98
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Voice: (301) 496-7243
Email: nidcdinfo@nih.gov
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
National Institute for Occupational Safety and Health
Hubert H. Humphrey Bldg.
200 Independence Ave., SW
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
Operating Environment
Remember to follow any special regulations in force in any area and always switch
your phone off whenever it is forbidden to use it, or when it may cause interference
or danger. When connecting the phone or any accessory to another device, read its
user's guide for detailed safety instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users are advised that for the
satisfactory operation of the equipment and for the safety of personnel, it is
recommended that the equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over your shoulder if you are
using an external antenna).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF) signals.
However, certain electronic equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to discuss alternatives.
99
Using Your Phone Near Other Electronic Devices
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained between a handheld
wireless phone and an implantable medical device, such as a pacemaker or
implantable cardioverter defibrillator, to avoid potential interference with the device.
Persons who have such devices:
• Should ALWAYS keep the phone more than six (6) inches from their implantable
medical device when the phone is turned ON;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the implantable medical device to minimize the
potential for interference;
• Should turn the phone OFF immediately if there is any reason to suspect that
interference is taking place.
• Should read and follow the directions from the manufacturer of your implantable
medical device. if you have any questions about using your wireless phone with
such a device, consult your health care provider.
For more information see, http://www.fcc.gov/oet/rfsafety/rf-faqs.html
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the event of
such interference, you may wish to consult your hearing aid manufacturer to discuss
alternatives.
Other Medical Devices
If you use any other personal medical devices, consult the manufacturer of your
device to determine if it is adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this information. Switch your phone
off in health care facilities when any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles. Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer of any equipment
that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require you to do so.
Health and Safety Information 100
Potentially Explosive Environments
Switch your phone off when in any area with a potentially explosive atmosphere and
obey all signs and instructions. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a refueling point (service station).
Users are reminded of the need to observe restrictions on the use of radio equipment
in fuel depots (fuel storage and distribution areas), chemical plants or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are often but not always clearly
marked. They include below deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as propane or butane), areas where the
air contains chemicals or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio signals, wireless and
landline networks as well as user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never rely solely on any wireless
phone for essential communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must be switched on and in a
service area with adequate signal strength. Emergency calls may not be possible on
all wireless phone networks or when certain network services and/or phone features
are in use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for example, 911
or other official emergency number). Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example), you may first need to
deactivate those features before you can make an emergency call. Consult this
document and your local cellular service provider.
When making an emergency call, remember to give all the necessary information as
accurately as possible. Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off the call until given
permission to do so.
101
FCC Notice and Cautions
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play with it because they
could hurt themselves and others, damage the phone or make calls that increase
your phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in close proximity to receiving
equipment. The FCC can require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or butane) must comply
with the National Fire Protection Standard (NFPA-58). For a copy of this standard,
contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
Cautions
Any changes or modifications to your phone not expressly approved in this
document could void your warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries, antennas and chargers. The
use of any unauthorized accessories may be dangerous and void the phone warranty
if said accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of equipment and can be
broken. Avoid dropping, hitting, bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the phone in a vehicle.
Faulty installation or service may be dangerous and may invalidate any warranty
applicable to the device.
• Check regularly that all wireless phone equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids, gases or explosive materials in the same
compartment as the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that an air bag inflates with great
force. Do not place objects, including both installed or portable wireless equipment
in the area over the air bag or in the air bag deployment area. If wireless
equipment is improperly installed and the air bag inflates, serious injury could
result.
Health and Safety Information 102
• Switch your phone off before boarding an aircraft. The use of wireless phone in
aircraft is illegal and may be dangerous to the aircraft's operation.
• Failure to observe these instructions may lead to the suspension or denial of
telephone services to the offender, or legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the signal strength in your
area. Your phone informs you of the current signal strength by displaying a number
of bars next to the signal strength icon. The more bars displayed, the stronger the
signal.
If you're inside a building, being near a window may give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of searching, a Power Save
feature is automatically activated. If your phone is active, it periodically rechecks
service availability or you can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays on the screen.
When a signal is found, your phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's turned on, it
receives and transmits radio frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This power can range from 0.006
watts to 0.2 watts in digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should service your
phone and accessories. Faulty service may void the warranty.
There are several simple guidelines to operating your phone properly and
maintaining safe, satisfactory service.
• If your phone is equipped with an external antenna, hold the phone with the
antenna raised, fully-extended and over your shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing the internal
antenna could inhibit call performance.
• Speak directly into the phone's receiver.
103
Availability of Various Features/Ring Tones
• Avoid exposing your phone and accessories to rain or liquid spills. If your phone
does get wet, immediately turn the power off and remove the battery. If it is
inoperable, call Customer Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may require additional
subscription and/or usage charges. Not all features are available for purchase or use
in all areas. Downloadable Ring Tones may be available at an additional cost. Other
conditions and restrictions may apply. See your service provider for additional
information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage patterns and conditions.
Battery power consumption depends on factors such as network configuration,
signal strength, operating temperature, features selected, frequency of calls, and
voice, data, and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard surface, can
potentially cause damage to the phone and battery. If you suspect damage to the
phone or battery, take it to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses less power; talk and
standby time are greatly affected by the signal strength on the cellular network
and the parameters set by the network operator.
• Follow battery usage, storage and charging guidelines found in the user’s guide.
• Battery charging time depends on the remaining battery charge and the type of
battery and charger used. The battery can be charged and discharged hundreds of
times, but it will gradually wear out. When the operation time (talk time and
standby time) is noticeably shorter than normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself over time.
• Use only Samsung-approved batteries and recharge your battery only with
Samsung-approved chargers. When a charger is not in use, disconnect it from the
power source.
• Do not use incompatible cell phone batteries and chargers. Some Web sites and
second-hand dealers, not associated with reputable manufacturers and carriers,
might be selling incompatible or even counterfeit batteries and chargers.
Health and Safety Information 104
Consumers should purchase manufacturer or carrier recommended products and
accessories.
• Extreme temperatures will affect the charging capacity of your battery: it may
require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in summer or winter
conditions, as you will reduce the capacity and lifetime of the battery. Always try to
keep the battery at room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0 °C (32 °F). The battery should not
be charged at temperatures below 0 degrees C (32 degrees F) or above 45
degrees C (113 degrees F).
• Do not place the phone in areas that may get very hot, such as on or near a
cooking surface, cooking appliance, iron, or radiator.
• Do not get your phone or battery wet. Even though they will dry and appear to
operate normally, the circuitry could slowly corrode and pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object (coin, clip, key, jewelry or pen) causes a direct connection between
the + and - terminals of the battery (metal strips on the battery), for example when
you carry a spare battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
• Do not crush, puncture or put a high degree of pressure on the battery as this can
cause an internal short-circuit, resulting in overheating.
• Dispose of used batteries in accordance with local regulations. In some areas, the
disposal of batteries in household or business trash may be prohibited. For safe
disposal options for Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a fire.
Care and Maintenance
Your phone is a product of superior design and craftsmanship and should be treated
with care. The suggestions below will help you fulfill any warranty obligations and
allow you to enjoy this product for many years.
• Keep the phone and all its parts and accessories out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and liquids contain minerals that will
corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an electric shock to
you or damage to the phone.
105
Care and Maintenance
• Do not use or store the phone in dusty, dirty areas, as its moving parts may be
damaged.
• Do not store the phone in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms up to its normal
operating temperature, moisture can form inside the phone, which may damage
the phone's electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break internal circuit
boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to clean the
phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water
solution.
• Do not paint the phone. Paint can clog the device's moving parts and prevent
proper operation.
• Do not put the phone in or on heating devices, such as a microwave oven, a stove
or a radiator. The phone may explode when overheated.
• If your phone is equipped with an external antenna, use only the supplied or an
approved replacement antenna. Unauthorized antennas or modified accessories
may damage the phone and violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working properly, take it to
your nearest qualified service facility. The personnel there will assist you, and if
necessary, arrange for service.
Health and Safety Information 106
Section 13: Warranty Information
Topics Covered
• Standard Limited Warranty
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the original
purchaser ("Purchaser") that SAMSUNG's Phones and accessories ("Products") are
free from defects in material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for the following
specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
90 Days
Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned upon proper use of
Product by Purchaser. This Limited Warranty does not cover: (a) defects or damage
resulting from accident, misuse, abuse, neglect, unusual physical, electrical or
electromechanical stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number removed or made
illegible; (c) any plastic surfaces or other externally exposed parts that are scratched
or damaged due to normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral equipment not
furnished or approved by SAMSUNG; (e) defects or damage from improper testing,
operation, maintenance, installation, or adjustment; (f) installation, maintenance,
and service of Product, or (g) Product used or purchased outside the United States or
Canada.
Warranty Information 107
Standard Limited Warranty
This Limited Warranty covers batteries only if battery capacity falls below 80% of
rated capacity or the battery leaks, and this Limited Warranty does not cover any
battery if (i) the battery has been charged by a battery charger not specified or
approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery
are broken or show evidence of tampering, or (iii) the battery has been used in
equipment other than the SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty period,
SAMSUNG will repair or replace, at SAMSUNG's sole option, without charge to
Purchaser, any defective component part of Product. To obtain service under this
Limited Warranty, Purchaser must return Product to an authorized phone service
facility in an adequate container for shipping, accompanied by Purchaser's sales
receipt or comparable substitute proof of sale showing the date of purchase, the
serial number of Product and the sellers' name and address. To obtain assistance on
where to deliver the Product, call Samsung Customer Care at 1-888-987-4357.
Upon receipt, SAMSUNG will promptly repair or replace the defective Product.
SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts
or components when repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases, pouches and
holsters will be warranted for a period of ninety (90) days. All other repaired/replaced
Product will be warranted for a period equal to the remainder of the original Limited
Warranty on the original Product or for 90 days, whichever is longer. All replaced
parts, components, boards and equipment shall become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this Limited Warranty,
Purchaser must pay all parts, shipping, and labor charges for the repair or return of
such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY? EXCEPT AS SET
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO WARRANTY OR REPRESENTATION
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR
PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
Warranty Information 108
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO
CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY
OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY
STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY
KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF
USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR
LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM
ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED
BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR
FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME
STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO
PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN
THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS HELD ILLEGAL
OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR THE
REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS
AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY
THIRDPARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE
109
Standard Limited Warranty
OR EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR
EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER
OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY
BE.
This Limited Warranty allocates risk of Product failure between Purchaser and
SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make modifications to
this Limited Warranty, or make additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer advertising or presentation,
whether oral or written, do not constitute warranties by SAMSUNG and should not be
relied upon.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the standard methods,
the data only appears to be removed on a superficial level, and it may be possible for
someone to retrieve and reuse the data by means of special software.
To avoid unintended information leaks and other problems of this sort, it is
recommended that the device be returned to Samsung’s Customer Care Center for
an Extended File System (EFS) Clear which will eliminate all user memory and return
all settings to default settings. Please contact the Samsung Customer Care Center
for details.
Important!: Please provide warranty information (proof of purchase) to Samsung’s Customer Care Center in
order to provide this service at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein St.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Warranty Information 110
Samsung Telecommunications America, LLC
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2007 Samsung Telecommunications America. All rights reserved.
No reproduction in whole or in part allowed without prior written approval.
Specifications and availability subject to change without notice.
111
Index
A
Accessing a Menu Function 24
Address Book
Searching for a Number 23
Alphabet mode 30
Audio 67
B
Battery
charging 6
installing 5
low indicator 7
removing 4
C
Call Functions 17
Adjusting the Call Volume 18
Answering a Call 19
Correcting the Number 17
Making a Call 17
Recent Calls 19
Redialing Last Number 18
Call Time 20
Call Waiting 23 61
Camera
Taking Pictures 70
camera options 70
Charging battery 6
Clear key 15
Command Keys 14
Converter 79
,
D
Data Call Time 20
Data Volume 20
Dialing a Number
Address Book 44
Display
icons 12
Display Settings 55
E
End key 15
Ending a Call 18
Entering Text 30
Changing the Text Entry Mode
30
Using Alphabet Mode 32
Using Numbers 33
Using Symbols 33
Using T9 Mode 31
F
Functions and Options 13
G
Games 69
Getting Started 4
Activating Your Phone 4
Voicemail 7
Graphics 68
Greeting Message 57
H
Health and Safety Information 87
I
Icons, description 12
International Call 17
K
Keypad Tone 54
L
Left soft key 14
Low battery indicator 7
112
M
Making a Call
Address Book 18
Menu Navigation 24
Menu Outline 25
Messaging 34
Types of Messages 34
Missed Call
Deleting 19
Viewing 19
Multimedia Files
Downloading 84
Mute 22
N
Navigation key 16
Network Selection 61
Network Services
Call Forwarding 59
Number mode 30
O
Options
During a Call 21
Putting a Call on Hold 21
P
Personal Assistant 67
Alarm 74
Calculator 78
Calendar 75
Phone
icons 12
Powering on/off
phone 7
R
Responsible Listening 97
Right soft key 15
113
S
Safe Use of your phone 89
Security 63
Security Settings 63
Send key 15
Service Dialing Numbers 51
Settings 53
Memory Status 66
Reset Settings 65
Shortcuts 24
Silent Mode 21
SIM card
installing 4
removing 5
Soft Keys 14
Sound Settings 53
Speakerphone Key 16
Speed Dial
Setting Up Entries 48
Standard Limited Warranty
107
Storing a Number
Address Book 46 47
Storing a number
Phone’s Memory 46
SIM Card 47
,
T
T9 Mode
enter a word 31
T9 mode 30
Text Input Mode
Changing 30
Text Messages 34
Travel adapter 6
U
Understanding Your Address book 44
Adding a New Contact 46
Group 50
Management 50
Own Phone Number 49
Speed Dial 48
Using Contacts List 44
Understanding Your Phone 9
Features of Your Phone 9
Front View of Your Phone 11
Open View of Your Phone 10
Using Management
Checking the Memory Status
51
Copying all to Phone 50
Deleting all of the Phone book
Entries 50
V
Viewing an Event 78
Voice Mail 7
changing number 8
W
Warranty Information 107
114
Download PDF