Miller | Trailblazer 302 Diesel | Trailblazer 302 Diesel

Trailblazer 302 Diesel
®
Quick
Specs
Industrial Applications
Processes (X-Ray Quality)
Output Range
Fabrication
Maintenance
Repair
Structural Steel Work
Pipe
Sheet Metal
Stick (SMAW)
MIG (GMAW)
Flux-Cored (FCAW)
AC/DC TIG (GTAW)
Air Carbon Arc (CAC-A) Cutting and Gouging
(Rated: 3/16-inch carbons,
Capable: 1/4-inch carbons)
Air Plasma Cutting and Gouging with
optional Spectrum models
DC Stick
DC TIG
AC TIG/Stick
MIG/FCAW
Issued April 2013 • Index No. ED/4.77
Diesel Engine-Driven
Welder/AC Generator
25– 300 A
10 – 300 A
10 – 225 A
13 – 35 V, 325 A
Generator Power Output Rated at 104˚ F (40˚ C)
Peak: 11,000 W — Continuous: 9,500 W
Accu-Rated™– Not Inflated
Generator Power
The Power of Blue .
®
DC TIG Arc End with Auto-Crater ™
• Eliminates need for a remote control
• Maintains shielding gas coverage
• Eliminates tungsten and workpiece
contamination
• Eliminates unwanted arc strikes
outside the weld area
The Professional Welder’s Choice
— designed with the professional in
mind, the Trailblazer 302 Diesel has
the best welding arc in its class!
Superior arc performance
• Four preset DIG settings (Stick)
• Adaptive Hot Start ™ (Stick)
• Excellent MIG/FCAW arc
performance
• Lift-Arc™ TIG with Auto-Crater™
and Auto-Stop™
EXCLUSIVE! Protective armor with
covers has high-impact resistance in
all temperatures and is chemicalresistant. Other applications include:
automotive bumpers, tractor hoods
and panels, lawn mower decks, large
structural parts, etc.
Independent weld and generator
advantages
• 11,000 watts of power
• No interaction between grinders,
power tools, etc. and the welding arc
• Generator power is independent
of weld
• 4-pole weld generator produces
best arc quality
See page 4 for more information.
Welder/generator is warranted for 3 years, parts and labor.
Engine is warranted separately by the engine manufacturer.
Miller Electric Mfg. Co.
Equipment Sales US and Canada
Website
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Phone: 866-931-9730
FAX: 800-637-2315
International Phone: 920-735-4554
International FAX: 920-735-4125
MillerWelds.com
Specifications
(Subject to change without notice.)
Welding
Mode
Process
Amp/Volt
Ranges
Weld Output Rated at
25 V (at 104° F/40° C)*
Single-Phase
Generator Power
Sound Levels at Rated
Output, 7 m (23 ft.)
CC/AC
TIG/Stick
10 – 225 A
200 A, 60% Duty Cycle
80.5 dB (105.5 Lwa)
CC/DC
Stick/TIG
10 – 300 A
280 A, 100% Duty Cycle
CV/DC
MIG/FCAW
13 – 35 V,
10 – 325 A
300 A, 100% Duty Cycle
Peak:
11,000 watts
Continuous:
9,500 watts
120/240 VAC,
88/44 A, 60 Hz
Net
Weight**
Dimensions
H: 30 in. (726 mm)
H: 34.25 in. (870 mm)
(to top of exhaust)
W: 20 in. (508 mm)
D: 52 in. (1321 mm)
720 lb.
(327 kg)
*Rated at sea level. **Net weight without fuel.
Certified by Canadian Standards Association to both the Canadian and U.S. Standards.
Engine Specifications
Engine Brand/
Warranty
Kubota: 2-year
limited North
American mfg.
(Engine warranted separately by the engine manufacturer.)
Horsepower (HP)
Type
Weld
Speed
Idle
Speed
Fuel
Capacity
19 HP at 3600 RPM
3-cylinder, industrial
liquid-cooled, diesel
3600
RPM
2450
RPM
12 gal.
(45 L)
Oil Capacity
Standard Shutdowns
3.4 qt. (3.2 L)
High Coolant Temperature/
Low Oil Pressure/Low Fuel
Why Buy a Gas or Diesel Engine?
Diesel Advantages
Gas Advantages
• Lower product cost (by 50–70%)
• Smaller size and less weight
• Less expensive engine repairs
• Uses 20–40% less fuel than
carburetor gas
• 1-1/2 to 2-1/2 times the engine life
• Required on some job sites for safety
• Better warranties
• Easier cold weather starting
• Typically have longer maintenance
intervals
• Convenient if other equipment is
diesel
Performance Charts
AUXILIARY POWER FUEL CONSUMPTION
WELD FUEL CONSUMPTION
1.20
2.00
1.75
1.00
US GAL./ HOUR
US GAL./ HOUR
1.50
1.25
1.00
0.75
0.80
0.60
Weld 3600 RPM
0.40
Idle
0.20
0.50
Idle
0.25
0
0
0
50
100
150
200
250
300
AMPERES AT 100% DUTY CYCLE
FUEL CONSUMPTION DATA
• 12-gallon fuel capacity.
• On a typical job using 1/8-inch 7018 electrodes (125 A, 20% duty cycle)
expect about 20 hours of operation.
• Welding at 150 A, 40% duty cycle uses approximately 3/4 gallon
per hour — about 16 hours of operation.
2
0
2000
4000
6000
WATTS AT 100% DUTY CYCLE
8000
10000
Function Guide
*Category Exclusive
1
2
3
4
5
6
1. Weld process switch combines easy to set weld processes with preset
DIG settings that make the Trailblazer 302 Diesel easy to set without
the complication of multiple switches.
2. Self-calibrating digital weld meters with meter maintenance displays.
• Preset and actual weld amperage/voltage
• Hour meter function
• Oil change interval
• Fuel gauge
• Engine RPMs
• High coolant temperature and low oil pressure shutdowns
• Low fuel shutdown — shuts engine off prior to running out of fuel
to prevent loss of fuel in the system, and make restarts easy.
Display will read noFUEL. Turn the machine off, add fuel, and restart.
3. Front panel fuel gauge* LEDs indicate fuel level. The “E” LED lights
when fuel is low.
4. DC polarity/AC switch allows selection between DC output polarity or
“industry best” 120 Hz AC weld output.
5. Standard 14-pin receptacle for simple connection of remote controls
and wire feeders. It features Auto Remote Sense™* which automatically
switches from Panel to Remote Amperage/Voltage (A/V) control with
remote connected. Eliminates confusion of the Panel/Remote A/V switch.
6. Automatic start at idle extends engine life and reduces fuel use
and noise.
3
The Trailblazer Power Advantage
®
Accu-Rated – Not Inflated Generator Power
™
Weld Power
Our Accu-Rated™ 11,000 watts of usable peak power is delivered
for a minimum of 30 seconds. Accu-Rated means peak power is
usable for maximum generator loads such as plasma cutting,
Millermatic® welders and motor starting. Accu-Rated peak power
beats the competition’s very short-duration peak or surge power.
Use your peak power, it’s more than a number.
Trailblazer 302 Diesel Independent Weld and
Generator Advantages
®
Generator Power
The Trailblazer 302 Diesel has independent weld and generator power—
a 4-pole, 3-phase weld generator and a strong power generator.
• 11,000 watts of power.
• No interaction between grinders, power tools, etc. and the
welding arc.
• Generator power is independent of weld.
• 4-pole weld generator produces the best arc quality.
SIMULTANEOUS WELDING AND POWER
Weld Current
In Amperes
0
100
150
200
250
300
Total Power
in Watts
11,000
8000
6700
5200
3500
1000
120 V Receptacle
Amperes
88
70
60
46
31
10
240 V Receptacle
Amperes
44
35
30
23
15
5
Superior Cooling Technology
2
1
Hot air
directed out
and upward
ENGINE
See Owner’s Manual for additional information.
GENERATOR POWER CURVE
3
300 150
AC POWER VOLTS
264 132
250 125
216 108
200 100
150
75
100
50
50
25
0
0
Cool air in
for engine
Cool air
in for
generator
Directed airflow improves cooling for long engine and component life.
0
20
40
60
80
100
120
140
160
180
70
80
90
AC POWER AMPS AT 120 V
0
10
20
30
40
50
60
AC POWER AMPS AT 240 V
Power is in the Numbers
• Tools and motors are designed to operate within 10 percent
of 120/240 VAC. The Trailblazer power generator provides
strong power while keeping the voltage within 10 percent of
120/240 VAC. This increases tool/motor performance
and life. See Generator Power Curve.
• Generator control technology matches the
generator’s output to engine horsepower. This
provides more weld output and lowers fuel consumption.
4
STATOR
1 The fully enclosed case design virtually eliminates hot air
recirculation when machine is mounted in tight spots.
2 Louver-directed air flow keeps the temperature of internal parts
cool for maximum performance and extended life.
3 Self-cooling stator barrel
completely encloses and protects
its generator from the dirtiest
and harshest environments.
All ratings are tested at 104˚ F (40˚ C) to maintain tough
work schedules, even in hot weather.
Genuine Miller Options
®
*Available as factory option. See ordering information on back page.
GFCI Protection* #195 496 Field
Kit contains two GFCI 120 VAC duplex
receptacles. (240 VAC GFCI receptacle
not required).
Electric Fuel Pump #195 214 Field
For use at high altitudes. Improves engine
starting and high-output performance.
Order the following from Miller Service Parts.
Female
Receptacle
Adapter Cord, Full KVA #300 517 Field
NEMA 14-50P to NEMA 6-50R. Adapts
engine drive 120/240 V plug to common
Millermatic® and Spectrum® 240 V plug.
Spark Arrestor #043 579 Field
Mandatory when operating on California
grasslands, brush or forest-covered land,
and all National Forests. For other areas,
check your state and local laws.
Engine Tune-Up Kits
#206 421 Field. Kubota D722
Tune-up kit includes engine filters.
Full KVA Plug Kit
#119 172 Field
120/240 VAC, 50 A plug
(NEMA 14-50P) to fit full
KVA receptacle.
Genuine Miller Accessories
®
Plasma Cutting
Multiprocess Welding
Spectrum 375 X-TREME and 625 X-TREME shown.
Gas Cylinder Mounting Assembly
#195 330
Designed for use with Protective Cage or by
itself. Includes base tray with bottle bracket,
vertical support rack and safety chain.
Note: Not recommended for use with Protective Cover.
Protective Cover
Spectrum® 375 X-TREME™ #907 529
See Lit. Index No. PC/9.2.
Spectrum® 625 X-TREME™ #907 531
Spectrum® 875 #907 390-01-1
See Lit. Index No. PC/9.8.
The Spectrum 375 X-TREME and 625
X-TREME come complete with protective
X-CASE™ (not shown).
Stick (SMAW) Welding
#195 334 For Diesel model without
Protective Cage.
Heavy-duty, water-resistant and mildewresistant covers protect and maintain the
finish of the welder.
Multimatic™ 200 #907 518
Portable, all-in-one multiprocess package
weighs only 29 pounds (13.2 kg), and
features excellent arc characteristics.
Exclusive Multi-Voltage Plug (MVP™)
provides flexibility to plug into 115- or 230volt power. Take it anywhere you need to
MIG, TIG or Stick weld. See Lit. Index No.
DC/12.57.
Weld Leads
#173 851 2/0, 350 A, 100% duty cycle.
50-foot stinger and 50-foot
work cable.
#043 952 2/0, 300 A, 100% duty cycle.
100-foot stinger and 50-foot
work cable.
5
Genuine Miller Accessories
®
MIG/Flux-Cored Welding
(continued)
TIG (GTAW) Welding
Trailers and Hitches
Dynasty® 200 Series
For premium portable
AC/DC TIG arc quality. See
Lit. Index No. AD/4.8.
SuitCase® X-TREME™ 8VS Wire Feeder
#951 181
SuitCase® X-TREME™ 12VS Wire Feeder
#951 543
Lightweight, voltage-sensing wire feeders
include secondary contactor, gas valve and
drive roll kit. See Lit. Index No. M/6.41 and
M/6.42.
SuitCase® 8RC Wire Feeder #951 186
SuitCase® 12RC Wire Feeder #951 188
Lightweight, modular design and flexible
enough to run a variety of wires up to
5/64-inch diameter. Comes standard with
remote voltage control. See Lit. Index
No. M/6.5.
Spoolmatic®
30A Spool Gun
#130 831
Air-cooled, 200amp, 1-pound
spool gun for
aluminum MIG. See Lit. Index No. M/1.73.
HF-251 Series #042 388
HF-251D-1, 115 VAC
High-frequency arc
starter and stabilizer. See
Accessory Lit. Index No.
AY/5.0.
Note: Trailer is shipped unassembled.
Remote Controls
RHC-14 Hand Control
#242 211 020
Miniature hand control for
remote current and contactor
control. Dimensions:
4 x 4 x 3.25 inches (102 x 102 x 82 mm).
Includes 20-foot (6 m) cord and 14-pin plug.
RFCS-14 HD Foot
Control #194 744
Heavy-duty foot current
and contactor control.
Includes 20-foot (6 m)
cord and 14-pin plug.
RMLS-14 #129 337 14-pin plug
Momentary- and maintained-contact rocker
switch for contactor control. Push forward
for maintained contact and back for momentary contact. Includes 20-foot (6 m) cord.
WC-24 Control #137 549
Use with Spoolmatic 30A.
XR™ Wire Feeders and Guns
Push-pull system designed to handle
difficult-to-feed soft alloy wires such as
aluminum. See Lit. Index No. M/1.7,
M/1.71, and M/1.73.
RCC-14 Remote Contactor and Current
Control #151 086 14-pin plug
Rotary-motion fingertip control fastens to
TIG torch using two Velcro® straps.
Includes 28-foot (8.5 m) control cord.
Extension Cords for 14-Pin
Remote Controls
#242 208 025 25 ft. (7.6 m)
#242 208 050 50 ft. (15.2 m)
#242 208 080 80 ft. (24.4 m)
6
HWY-1000 Trailer #195 013
A 1000-pound (454 kg) capacity highway
trailer with welded steel tubing frame,
heavy-duty axle with roller bearing hubs
and leaf-spring suspension. The HWY-1000
comes with jack stand, 2-inch (50 mm) ball
hitch, fenders and lights.
Cable Tree #195 023
Provides an area to conveniently wrap
weld cables and extension cords on the
HWY-1000 trailer.
Dual Hitch #300 831
2-inch (50 mm) ball hitch and 3-inch
(76 mm) lunette eye in one reversible
assembly.
Typical Installations
Stick Electrode
Stick (SMAW) Basic Equipment
Work
Flux-Cored (FCAW) Basic Equipment
SuitCase® X-TREME™ 8VS
SuitCase® X-TREME™ 12VS
Flux-Cored Gun
X-TREME 8VS/
X-TREME 12VS
Feeder
#951 181
#951 543
Work
14-Pin
MIG (GMAW) Basic Equipment
SuitCase 8RC
SuitCase® 12RC
®
MIG Gun
SuitCase
8RC/12RC
#951 186
#951 188
Work
Aluminum MIG with
Spoolmatic 30A Gun
Aluminum MIG (GMAW) Basic Equipment
Spoolmatic® 30A
WC-24
14-Pin
#130 831
#137 549
WC-24
Work
TIG (GTAW) Basic Equipment
Dynasty® 200 Series
HF-251D-1
TIG
Torch
14-Pin
HF-251D-1
#042 388
Work
Cutting Torch
Plasma Basic Equipment
™
Spectrum® 375 X-TREME #907 529
Spectrum® 625 X-TREME™ #907 531
Spectrum® 875
#907 390-01-1
Spectrum
Work
Mounting Specifications
G
Engine End
A
4 Holes
B
C
A. 20 in. (508 mm)
B. 16.5 in. (419 mm)
C. 1.75 in. (44 mm)
D. 6.062 in. (154 mm)
E. 32.75 in. (832 mm)
F. 52 in. (1321 mm)
G. .406 in. (10 mm) diameter
Height: 30 in. (762 mm)
34.25 in. (870 mm) (to top of exhaust)
Width: 20 in. (508 mm)
Depth: 52 in. (1321 mm)
D
E
F
7
Ordering Information
Equipment and Options
Stock No.
Description
Trailblazer® 302 Diesel
(19 HP Kubota)
#907 548-001
#907 548
#907 548-002
Base machine, CC/CV, AC/DC 11,000 watts
With GFCI receptacles
International
GFCI Protection
#195 496
Field
Electric Fuel Pump
#195 214
Field. For use at high altitudes
Spark Arrestor
#043 579
Field
Adapter Cord, Full KVA
#300 517
Field
Full KVA Plug
#119 172
Field
Engine Tune-Up Kit
#206 421
Field
Qty.
Accessories
Gas Cylinder Mounting Assembly
#195 330
Protective Cover
#195 334
Spectrum® Plasma Cutters
Multimatic 200 Welder
See page 6
#907 518
All-in-one MIG, TIG and Stick welding. See Lit. Index No. DC/12.57
Spoolmatic® 30A Spool Gun
#130 831
Requires WC-24 Control. See Lit. Index No. M/1.73
WC-24 Control
#137 549
See Lit. Index No. M/1.73
™
SuitCase® Portable Wire Feeders
See page 6
™
XR Wire Feeder Control and Guns
See Lit. Index No. M/1.7, M/1.71, and M/1.73
Dynasty® 200 Series TIG Welders
HF-251D-1
See Lit. Index No. AD/4.8
#042 388
Remote Controls and Cords
115 VAC. See Lit. Index No. AY/5.0
See page 6
HWY-1000 Trailer
#195 013
Cable Tree
#195 023
Dual Hitch
#300 831
Date:
Total Quoted Price:
Distributed by:
Litho in USA
Price
Download PDF