Security Target: c0259_est

Security Target: c0259_est
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
bizhub C360 / bizhub C280 / bizhub C220 /
bizhub C7728 / bizhub C7722 /
ineo+ 360 / ineo+ 280 / ineo+ 220 /
VarioLink 3622c / VarioLink 2822c / VarioLink 2222c
Control Software
A0ED0Y0-0100-GM0-22
Security Target
This document is a translation of the evaluated and certified security target
written in Japanese
Version : 1.06
Issued on : April 7, 2010
Created by: KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
1 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
<Revision History>
Date
2009/10/23
Ver.
1.00
Division
Office Software
Development Div. 1
Approved
Checked
Created
Hirota
Nakajima
Yoshida
Initial Version.
Revision
2009/11/25
1.01
Office Software
Development Div. 1
Hirota
Nakajima
Yoshida
Deal with typos.
2009/11/30
1.02
Hirota
Nakajima
Yoshida
Deal with typos.
2010/1/6
1.03
Office Software
Development Div. 1
Office Software
Development Div. 1
Hirota
Nakajima
Yoshida
Deal with typos.
2010/2/9
1.04
Office Software
Development Div. 1
Hirota
Nakajima
Yoshida
Deal with typos.
2010/3/2
1.05
Office Software
Development Div. 1
Hirota
Nakajima
Yoshida
Deal with typos.
2010/4/7
1.06
Office Software
Development Div. 1
Hirota
Yokobori
Yoshida
Deal with typos.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
2 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
---- [ Contents ] --------------------------------------------------------------------------------1.
ST Introduction ........................................................................................................................ 6
1.1. ST Identification .............................................................................................................................6
1.2. TOE Identification ..........................................................................................................................6
1.3. TOE Overview ...............................................................................................................................6
1.3.1. TOE Type.......................................................................................................................................................... 6
1.3.2. Usage of TOE and Main Security Functions..................................................................................................... 6
1.4. TOE Description ............................................................................................................................7
1.4.1. Roles of TOE Users .......................................................................................................................................... 7
1.4.2. Physical Scope of TOE ..................................................................................................................................... 8
1.4.3. Logical Scope of TOE..................................................................................................................................... 11
2.
Conformance Claims ............................................................................................................. 18
2.1. CC Conformance Claim...............................................................................................................18
2.2. PP Claim......................................................................................................................................18
2.3. Package Claim ............................................................................................................................18
2.4. Reference ....................................................................................................................................18
3. Security Problem Definition.................................................................................................. 19
3.1. Protected Assets..........................................................................................................................19
3.2. Assumptions ................................................................................................................................20
3.3. Threats.........................................................................................................................................20
3.4. Organizational Security Policies ..................................................................................................22
4. Security Objectives................................................................................................................ 23
4.1. Security Objectives for the TOE ..................................................................................................23
4.2. Security Objectives for the Operational Environment ..................................................................25
4.3. Security Objectives Rationale......................................................................................................27
4.3.1. Necessity ........................................................................................................................................................ 27
4.3.2. Sufficiency of Assumptions ............................................................................................................................. 28
4.3.3. Sufficiency of Threats ..................................................................................................................................... 28
4.3.4. Sufficiency of Organizational Security Policies............................................................................................... 32
5.
Extended Components Definition ........................................................................................ 33
5.1. Extended Function Component ...................................................................................................33
5.1.1. FAD_RIP.1 Definition ...................................................................................................................................... 33
5.1.2. FIT_CAP.1 Definition ...................................................................................................................................... 34
6.
IT Security Requirements...................................................................................................... 36
6.1. TOE Security Requirements ........................................................................................................36
6.1.1. TOE Security Function Requirements ............................................................................................................ 36
6.1.2. TOE Security Assurance Requirements ......................................................................................................... 65
6.2. IT Security Requirements Rationale ............................................................................................66
6.2.1. Rationale for IT Security Functional Requirements ........................................................................................ 66
6.2.2. Rationale for IT Security Assurance Requirements ........................................................................................ 85
7.
TOE Summary Specification ................................................................................................. 86
7.1. F.ADMIN (Administrator Function) ...............................................................................................86
7.1.1. Administrator Identification Authentication Function ....................................................................................... 86
7.1.2. Auto Logoff Function of Administrator Mode................................................................................................... 87
7.1.3. Function Supported in Administrator Mode .................................................................................................... 87
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
3 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
7.2. F.ADMIN-SNMP (SNMP Administrator Function) ........................................................................95
7.2.1. Identification and Authentication Function by SNMP Password ..................................................................... 96
7.2.2. Management Function using SNMP ............................................................................................................... 96
7.3. F.SERVICE (Service Mode Function) ..........................................................................................97
7.3.1. Service Engineer Identification Authentication Function................................................................................. 97
7.3.2. Function Supported in Service Mode.............................................................................................................. 97
7.4. F.USER (User Function) ..............................................................................................................99
7.4.1. User Identification and Authentication Function ............................................................................................. 99
7.4.2. Auto Logoff Function in User Identification and Authentication Domain ....................................................... 100
7.4.3. Modification Function of User Password ...................................................................................................... 101
7.5. F.BOX (User Box Function) .......................................................................................................101
7.5.1. Personal User Box Function ......................................................................................................................... 102
7.5.2. Public User Box Function ............................................................................................................................. 103
7.5.3. Group User Box Function ............................................................................................................................. 105
7.6. F.PRINT (Secure Print Function, ID & Print Function) ...............................................................105
7.6.1. Secure Print Function ................................................................................................................................... 106
7.6.2. ID & print Function........................................................................................................................................ 107
7.7. F.OVERWRITE-ALL (All Area Overwrite Deletion Function)......................................................107
7.8. F.CRYPT (Encryption Key Generation Function).......................................................................108
7.9. F.RESET (Authentication Failure Frequency Reset Function)...................................................108
7.10. F.TRUSTED-PASS (Trust Channel Function) ..........................................................................109
7.11. F.S/MIME (S/MIME Encryption Processing Function)..............................................................109
7.12. F.FAX-CONTROL (FAX Unit Control Function)........................................................................110
7.13. F.SUPPORT-AUTH (External Server Authentication Operation Support Function) .................110
7.14. F.SUPPORT-CRYPTO (ASIC Support Function).....................................................................110
7.15. F.ADMIN-WebDAV (Administrator Function (Counter Management Function)).......................110
7.15.1. Identification and Authentication Function by WebDAV Server Password ................................................. 110
7.15.2. Management Function Utilizing WebDAV ....................................................................................................111
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
4 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
---- [ List of Figures ] --------------------------------------------------------------------------------Figure 1 An example of MFP’s use environments.............................................................................8
Figure 2 Hardware composition relevant to TOE ..............................................................................9
---- [ List of Tables ] --------------------------------------------------------------------------------Table 1 Conformity of security objectives to assumptions, threats, and organization security
policies .....................................................................................................................................27
Table 2 Cryptographic Key Generation: Relation of Standards-Algorithm-Key sizes ...................37
Table 3 Cryptographic Operation: Relation of Algorithm-Keysizes-Cryptographic Operation.......37
Table 4 User Box Access Control: Operational List ......................................................................38
Table 5 Secure Print File Access Control: Operational List ..........................................................38
Table 6 Setting Management Access Control: Operational List....................................................39
Table 7 ID & Print file Access Control: Operational List................................................................39
Table 8 TOE Security Assurance Requirements .............................................................................65
Table 9 Conformity of IT Security Functional Requirements to Security Objectives .......................66
Table 10 Dependencies of IT Security Functional Requirements Components ..............................80
Table 11 Names and Identifiers of TOE Security Function ..............................................................86
Table 12 Characters and Number of Digits for Password ..............................................................87
Table 13 Types and Methods of Overwrite Deletion of Overall Area .............................................108
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
5 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
1. ST Introduction
1.1. ST Identification
- ST Title
:
bizhub C360 / bizhub C280 / bizhub C220 / bizhub C7728 / bizhub C7722
/ ineo+ 360 / ineo+ 280 / ineo+ 220 / VarioLink 3622c / VarioLink 2822c /
VarioLink 2222c
Control Software A0ED0Y0-0100-GM0-22
Security Target
- ST Version
:
1.06
- Created on
:
April 7, 2010
- Created by
:
KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
Eiichi Yoshioda
1.2. TOE Identification
- TOE Name
:
Japanese Name :
bizhub C360 / bizhub C280 / bizhub C220 / bizhub C7728 / bizhub C7722
/ ineo+ 360 / ineo+ 280 / ineo+ 220 / VarioLink 3622c / VarioLink 2822c /
VarioLink 2222c
Zentai Seigyo Software
English Name :
bizhub C360 / bizhub C280 / bizhub C220 / bizhub C7728 / bizhub C7722
/ ineo+ 360 / ineo+ 280 / ineo+ 220 / VarioLink 3622c / VarioLink 2822c /
VarioLink 2222c
Control Software
- TOE Version
:
A0ED0Y0-0100-GM0-22
- TOE Type
:
Software
- Created by
:
KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
1.3. TOE Overview
This paragraph explains the usage, main security functions, and operational environment of
TOE.
1.3.1. TOE Type
bizhub C360 / bizhub C280 / bizhub C220 / bizhub C7728 / bizhub C7722 / ineo+ 360 / ineo+ 280 /
ineo+ 220 / VarioLink 3622c / VarioLink 2822c / VarioLink 2222c control software, which is the
TOE, is an embedded software product installed in the flash memory on the MFP controller to
control the operation of the whole MFP.
1.3.2. Usage of TOE and Main Security Functions
bizhub C360, bizhub C280, bizhub C220, bizhub C7728, bizhub C7722, ineo+ 360, ineo+ 280,
ineo+ 220, VarioLink 3622c, VarioLink 2822c and VarioLink 2222c are digital multi-function
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
6 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
products provided by Konica Minolta Business Technologies, Inc., composed by selecting and
combining copy, print, scan and FAX functions. (Hereinafter all the products are referred to as
"MFP".) TOE is the “control software for bizhub C360 / bizhub C280 / bizhub C220 / bizhub
C7728 / bizhub C7722 / ineo+ 360 / ineo+ 280 / ineo+ 220 / VarioLink 3622c / VarioLink 2822c /
VarioLink 2222c" that controls the entire operation of MFP, including the operation control
processing and the image data management triggered by the panel of the main body of MFP or
through the network.
TOE supports the protection from exposure of the highly confidential documents stored in
MFP. Moreover, for the danger of illegally bringing out HDD, which stores image data in MFP,
TOE can encrypt all the data written in HDD including image data using ASIC (Application
Specific Integrated Circuit). Besides, TOE has the function that deletes all the data of HDD
completely by deletion method compliant with various overwrite deletion standards at the time
of abandonment or the lease returns and the function that controls the access from the public
line against the danger using Fax function as a steppingstone to access internal network. So it
contributes to the prevention of information leakage of the organization that uses MFP.
1.4. TOE Description
1.4.1. Roles of TOE Users
The roles of the personnel related to the use of MFP with TOE are defined as follows.
z User
An MFP user who is registered into MFP. (In general, the employee in the office is assumed.)
z Administrator
An MFP user who manages the operations of MFP. Manages MFP’s mechanical operations
and users. (In general, it is assumed that the person elected from the employees in the office
plays this role.)
z Service engineer
A user who manages the maintenance of MFP. Performs the repair and adjustment of MFP. (In
general, the person-in-charge of the sales companies that performs the maintenance service of
MFP in cooperation with Konica Minolta Business Technologies, Inc. is assumed.)
z Responsible person of the organization that uses MFP
A responsible person of the organization that manages the office where the MFP is installed.
Assigns an administrator who manages the operation of MFP.
z Responsible person of the organization that manages the maintenance of MFP
A responsible person of the organization that manages the maintenance of MFP. Assigns
service engineers who manage the maintenance of MFP.
Besides this, though not a user of TOE, those who go in and out the office are assumed as
accessible persons to TOE.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
7 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
1.4.2. Physical Scope of TOE
1.4.2.1. Use Environment
Figure 1 shows a general environment in which the usage of MFP equipped with TOE is
expected. Moreover, the matters expected to occur in the use environment are listed below.
Office
MFP
SMTP Server
DNS Server
TOE
FTP Server
Internet
Firewall
Public line
External Network
Client PC
WebDAV Server
User Information
Management
Server
Figure 1 An example of MFP’s use environments
z An intra-office LAN exists as a network in the office.
z MFP is connected to the client PCs via the intra-office LAN, and has mutual data
communications.
z When a SMTP, FTP, or WebDAV server is connected to the intra-office LAN, MFP can carry
out data communications with these servers, too. (The DNS service will be necessary when
setting a domain name of the SMTP/FTP/WebDAV server.)
z It is also assumed to unify management of user IDs/passwords in a server. In this case, TOE
can control access to the MFP by using the user registration information in the user
information management server.
z When the intra-office LAN connects to an external network, measures such as connecting via
a firewall are taken, and an appropriate setup to block access requests to the MFP from the
external network is applied.
z The intra-office LAN provides a network environment that cannot be intercepted by office
operations including using switching hubs and installing wiretapping detectors.
z The public line connected with MFP is used for communications by Fax and the remote
diagnostic function.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
8 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
1.4.2.2. Operation Environment
MFP
MFP Controller
RS-232C
ASIC
CPU
RAM
NVRAM
Flash Memory
Ethernet
USB
* USB keyboard
etc.
USB
- TOE
HDD
- Message data
etc.
* Device I/F kit
*FAX unit
Main/Sub
Power
Public line
Operator Operator
Panel
-Scanner Unit
-Automatic
Document Feeder
Paper
Printer
Unit
Paper
Figure 2 Hardware composition relevant to TOE
Figure 2 shows the structure of the hardware environment in MFP that TOE needs for the
operation. The MFP controller is installed in the main body of MFP, and TOE exists in the flash
memory on the MFP controller, loaded into the main memory.
The following explains about the unique hardware on the MFP controller, the hardware having
interfaces to the MFP controller, and the connection using interfaces, shown in Figure 2.
z Flash memory
A storage medium that stores the object code of the "MFP Control Software," which is the
TOE. Additionally, stores the message data expressed in each country's language to display
the response to access through the panel and network.
z NVRAM
A nonvolatile memory. This memory medium stores various settings that MFP needs for
processing of TOE.
z ASIC
An integrated circuit for specific applications which implements an HDD encryption function
for enciphering the data written in HDD.
z HDD
A hard disk drive of 250GB in capacity. This is used not only for storing image data as files
but also as an area to save image data and destination data temporarily during extension
conversion and so on.
z Main/sub power supply
Power switches for activating MFP.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
9 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
z Panel
An exclusive control device for the operation of MFP, equipped with a touch panel of a liquid
crystal monitor, ten-key, start key, stop key, screen switch key, etc.
z Scan unit/automatic document feeder
A device that scans images and photos from paper and converts them into digital data.
z Printer unit
A device to actually print the image data which were converted for printing when receives a
print request from the MFP controller.
z Ethernet
Supports 10BASE-T, 100BASE-TX, and Gigabit Ethernet.
z USB
Copying image file to an external memory, copying or printing image file from an external
memory, update of TOE, and so on can be performed through this interface. This is also
usable as an connection interface of the optional parts. There are the device interface kit
which is need for copy or print from bluetooth device and the USB keyboard (option 1) to
complement key entry from the panel. Including an external memory, it is necessary to be
able to use them.
z RS-232C
Serial connection using D-sub 9-pin connectors is usable. The maintenance function is usable
through this interface in the case of failure. It is also possible to use the remote diagnostic
function (described later) by connecting with the public line via a modem.
z FAX unit (* optional part)
A device that has a port of Fax public line and is used for communications for FAX-data
transmission and remote diagnostic (described later) via the public line. Is not pre-installed
in MFP as a standard function according to the circumstances in sales, but sold as an optional
part. Fax unit is purchased when the organization needs it, and the installation is not
indispensable.
1.4.2.3. Guidance
z bizhub C360 / C280 / C220 Service Manual Security Functions (Japanese)
z bizhub C360 / C280 / C220 / C7728 / C7722 SERVICE MANUAL SECURITY FUNCTION
z ineo+ 360 / 280 / 220 SERVICE MANUAL SECURITY FUNCTION
z VarioLink 3622c / 2822c / 2222c SERVICE MANUAL SECURITY FUNCTION
z bizhub C360 / C280 / C220 User's Guide Security Functions (Japanese)
z bizhub C360 / C280 / C220 User's Guide [Security Operations]
It is usable when the display language is English, French, Italian, German or Spanish. It does not affect the
operation of security functions.
1
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
10 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
z bizhub C7728 / C7722 User’s Guide [Security Operations]
z ineo+ 360 / 280 / 220 User's Guide [Security Operations]
z VarioLink 3622c / 2822c / 2222c User's Guide [Security Operations]
1.4.3. Logical Scope of TOE
Users use a variety of functions of TOE from the panel and a client PC via the network.
Hereafter, this section explains typical functions such as the basic function, the user box function
to manage the image files stored, the user identification and authentication function, the
administrator function manipulated by administrators, the service engineer function
manipulated by service engineers, and the function operated in the background without user's
awareness.
1.4.3.1. Basic Function
In MFP, a series of functions for the office work concerning the image such as copy, print, scan,
and fax exists as basic functions, and TOE performs the core control in the operation of these
functions. It converts the raw data acquired from the external device of the MFP controller into
image files, and stores them in RAM and HDD. (For print image files from client PCs, multiple
types of conversion are applied.) These image files are converted into data to be printed or sent,
and transmitted to the device outside of the MFP controller concerned.
Operations of copy, print, scan, and FAX are managed by the unit of job, so that operation
priority can be changed, finishing of print jobs can be changed, and such operations can be
aborted, by giving directions from the panel.
The following is the functions related to the security in the basic function.
z Secure Print Function
When a Secure Print password is received together with printing data, the image file is
stored as standby status. Then, printing is performed by a print direction and password entry
from the panel.
When printing is requested by a client PC, this function eliminates the possibility that other
users stole a glance at the printing of highly confidential data, or such data is slipped into the
other printings.
z ID & Print Function
When this function is set up, usual print data are saved in the print waiting state, and
printed by the user authentication processing from the panel. Even when this function is not
set up, if it is specified on the print data to activate this function, the system will operate in
the same manner as this function is set up by a user.
1.4.3.2. User Box Function
A directory called a "user box" can be created as an area to store image files in HDD. Three
types of user box are usable; the first is the personal user box which a user possesses, the second
is the public user box which is shared by registered users who made a certain number of groups,
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
11 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
and the third is the group box which is shared by the users belonging to same account. As for the
personal user box, the operation is limited only for the user who owns it, the public user box
performs access control by sharing a password set to the user box among users, and the group
box limits operations only for the users of the account that are permitted to use it.
TOE processes the following operation requests to a user box or image files in the user box that
is transmitted from the panel or the network unit through a network from a client PC.
z Print, transmit, and download from a client PC, of image files in a user box
¾
The encryption of box file is possible in the E-mail that is one of the transmission
methods.
z Delete an image file in a user box, move/copy it to other user boxes and copy it to external
memory
z Set a storing period of image files in a user box (delete automatically after the period passes.)
z Change the name and password of a user box, or delete a user box
z Set attributes of a user box (change the type of a personal user box, public user box, or group
box)
1.4.3.3. User Authentication Function
TOE can limit the user who uses MFP. For access through the panel or the network, TOE
identifies and authenticates that the user is permitted to use the MFP by applying the user
password and user ID. When the identification and authentication succeeds, TOE permits the
user the use of the basic function and the user box function, etc.
Several types of user authentication like below are supported.
(1) Machine authentication 2
A method to authenticate user at MFP by registering a user ID and a user password into
HDD on the MFP controller.
(2) External server authentication
A method to authenticate user at MFP by using the user ID and the user password that are
registered on the user information management server which is connected with the
intra-office LAN without managing the user ID and user password on the MFP side.
Though multiple methods called Active Directory 3, NTLM 4, and NDS are supported, the
method of the external server authentication assumed in this ST is applied only to the case
of using Active Directory.
1.4.3.4. Account Authentication Function 5
TOE can manage the MFP users by grouping them into Account unit. The methods of Account
Authentication are as follows.
2
When user is set “Pause” by administrator function, authentication function for the user does not work.
A method of directory service that Windows Server 2000 (or later) supports to uniformly manage user
information in the network environment of Windows platform.
4 An abbreviation of NT LAN Manager. An authentication method used in directory service that Windows NT
supports to uniformly manage user information in network environment of Windows platform.
5
When account is set “Pause” by administrator function, authentication function for the account does not work.
3
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
12 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
(1) Method synchronized with User Authentication
Set an Account ID on a user beforehand, and associate the user with the account ID of the
user’s account when he/she is authenticated.
(2) Method not synchronized with User Authentication
Associate a user with his/her account ID when the user is authenticated by the account
password set for each account ID.
1.4.3.5. Administrator Function
TOE provides the functions such as the management of user boxes, management of user
information at the time of MFP authentication and management of various settings of the
network, image quality, etc in the administrator mode that only authenticated administrator can
manipulate.
The following shows the functions related to the security.
z User registration management
¾ Registration or change of user IDs/passwords, deletion of users, and pause/resume of users
¾ Change of the association between users and account IDs
z Account registration management
¾ Registration or change of account IDs/passwords and pause/resume of accounts.
z Management of user box settings
¾ Registration or change of user box passwords, and management of user attributes
z Operational setup of automatic system reset
¾ Setup of the function that logs out automatically when the setting time passed.
z Management of network settings
¾ Connection setting of the intra-office LAN (setting of DNS server)
¾ SMTP setting (setting of the SMTP server utilized by E-mail transmission)
¾ IP addresses, NetBIOS names, and AppleTalk printer names etc.
z Backup or restore function of NVRAM and HDD
¾ This is performed through the network by using an application exclusive use for the
management installed in the client PC.
z Complete overwrite deletion function of HDD
¾ There are data deletion methods conformed to various military standards (ex. Military
Standard of United States Department of Defense)
¾ When this function is started up, in conformity with a set method, the overwrite deletion is
executed for the overall area of HDD.
z Format function of HDD
¾ A logical format is executable.
z Counter management function
¾ A function to manage the counter information such as the number of printed sheets for
each user through the WebDAV service or FTP service. (Reference of user password and
account password is possible.)
z Management of FAX setup (when Fax unit is installed.)
¾ Setup of TSI 6 receiving
6
An abbreviation of Transmitting Subscriber Identification. The same meaning of Identification of Subscriber's
Terminal. TSI receiving is the function that can designate the user box to be stored for each subscriber.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
13 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
¾ Setup of FAX output at PC-FAX receiving (Storing in Box or common Box area for all users
are available.)
The functions below are the operation setting functions related especially to the behavior of the
security function.
z Method setup of a user authentication function
¾ Machine authentication, external server authentication, or user authentication stop is
selected.
¾ Combination with Account Authentication is set up. (Method synchronized with User
Authentication, Method not synchronized with User Authentication)
z Setup of access when the user attribute is public
¾ It is selected whether to permit or prohibit MFP utilization of the user who is not identified
by user ID.
z Setup of a password policy function
¾ It is selected whether to enable or disable the function to check the several conditions of
the password, such as the number of valid digits of various passwords.
z Setup of the authentication method of Secure Print and the prohibit function of
authenticating operations.
¾ When secure print files are authenticated, the authentication prohibition function operates
in a mode, and does not operate in the other mode.
¾ The operation mode of the function detecting unsuccessful authentication in each
authentication function is also synchronous with the above mode.
¾ The above-mentioned operational modes are selected.
z Setup of the network setting modification function by SNMPv1 and v2.
¾ It is selected whether to enable or disable the function to change MIB by SNMPv1 and v2.
z Operational Setup of Authentication Function when writing using SNMPv3
¾ The security levels of authentication or skipping authentication is selected.
¾ For the security levels, either "only authentication password" or "authentication password
+ privacy password" is available.
z Setup of the HDD encryption function
¾ Whether to activate or stop the function is selected.
¾ An encryption passphrase is registered or changed when the function is activated.
z Setup of the user box collective management function
¾ It is selected whether to enable or disable this function.
z Setup of the print capture function
¾ A function to verify the print data received by MFP when the print function is faulty.
¾ It is selected whether to enable or disable this function.
z Setup of the network setting management reset function
¾ This function resets a series of items to factory default values
¾ It is selected whether to enable or disable this function.
z
Setup of the trusted channel (SSL/TLS encryption communications) function
¾ SSL/TLS server certificates are generated or imported.
¾ The encryption method used for communications is set up.
z Setup of the transmission address data
¾ A transmission address or method used for box file transmission etc. is selected.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
14 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
¾ S/MIME certificates are imported.
z Setup of the WebDAV server
¾ Setup of the communications function of the WebDAV server, which can obtain user
settings.
z Setup of the FTP server function
¾ Whether to activate or stop the function is selected.
z Setup of the S/MIME function
¾ Whether permit or prohibit the S/MIME certificate automatic registration function is
selected.
¾ The encryption method used for data encryption is selected.
z Setup of the ID & print function
¾ Whether to activate the ID & print function or not in normal printing is selected.
1.4.3.6. Service Engineer Function
TOE provides a management function of administrator and a maintenance function, such as
adjusting the device for Scan/Print etc, within the service mode that only a service engineer can
operate. The following shows the functions related to security.
z Modification function of administrator password
The following is a set of operation setting functions related especially to the behavior of the
security function.
z Authentication setup of the service engineer with the CE 7 password.
¾ Whether to activate or stop the function is selected.
z Setup of remote diagnostic function (later description)
¾ Able to select permission or prohibition.
z Setup of a TOE update function via Internet
¾ Able to select permission or prohibition.
z Setup of maintenance function
¾ Able to select permission or prohibition.
z The format function of HDD
¾ A logical format and a physical format are executable.
z Installation setting of HDD
¾ An explicit installation setting is necessary to use HDD as a data storage area.
z Initialization function
¾ The various settings that the user or the administrator has set and the data that the user
has stored are deleted.
1.4.3.7. Other Functions
TOE provides the functions that run background without awareness of the user and the
updating function of TOE. The following explains the major functions.
7
An abbreviation of Customer Service engineer
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
15 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
z
Encryption key generation function
Performs encryption/decryption by ASIC when writing data in HDD or reading data from
HDD. (TOE does not process the encryption and description itself.)
The operational setup of this function is performed by the administrator function. When
activated, TOE generates the encryption key by the encryption passphrase that was entered
on the panel.
z
Remote diagnostic function
MFP’s equipment information such as operating state and the number of printed sheets is
managed by making use of the connection by aport of FAX public line, by a modem through
RS-232C or by E-mail or WebDAV to communicate with the support center of MFP produced
by Konica Minolta Business Technologies, Inc. In addition, if necessary, appropriate services
(shipment of additional toner packages, account claim, dispatch of service engineers due to
the failure diagnosis, etc.) are provided.
z
Updating function of TOE
TOE facilitated with the function to update itself. As for the update means, there are a
method that exists as one of items of remote diagnostic function, a method that downloads
from FTP server through Ethernet (TOE update function via Internet), and a method that
performs the connection of external memory.
z
Encryption communication function
TOE can encrypt the data transmitted from client PC to MFP, and the data received by
download from MFP by using SSL/TLS.
The operational setup of this function is performed by the administrator function.
z
S/MIME certificate automatic registration function
It is the function to register the certificate for S/MIME (conforms to ITU-T X.509) with each
transmission address automatically. When a certificate is attached in received e-mail, MFP
recognizes user ID according to the information of e-mail header, and registers the
certificate as certificate of the same user ID.
The standard is that MFP is not installed Fax unit and does not have a port of Fax public line,
so there is not the access to the internal network through MFP. TOE provides the following
function, provided that Fax unit is installed in MFP.
z
Fax unit control function
TOE prohibits access to the internal network, where MFP was connected to, from a port of
Fax public line through Fax unit.
TOE makes effective use of the security function (encryption function) of ASIC, which is an
external entity. The following explains typical functions related to the external entity.
z
Utilization of ASIC
ASIC, an external entity, activates a function to encrypt the data in HDD as a function to
protect unauthorized bring-out of data and so on when an encryption passphrase is set up.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
16 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
1.4.3.8. Enhanced Security Function
Various setting functions related to the behavior of the security function for the Administrator
function and the Service engineer function can be set collectively to the secure values by the
operation settings of the "Enhanced Security Function". Each value set is prohibited changing
itself into the vulnerable one individually. As the function that does not have a setting function of
the operation individually, there is the reset function of the network setting and the update
function of TOE through the network, but the use of these functions is prohibited.
The following explains the series of the setting condition of being the enhanced security
function active. In order to activate the enhanced security function, the prerequisite is required
that an administrator password and a CE password should be set along with the password
policy.
z User authentication function
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
: Valid (Both authentication by the main body
and the external server are usable)
Access of User : PUBLIC
: Prohibited
Service engineer authentication function
: Valid
Password policy function
: Valid
Setup of secure print authentication method : Authentication operation prohibition function
effective method
Setup of Authentication Operation Prohibition function
: The panel and account are locked out for 5
seconds when authentication has failed (failure
frequency threshold: 1-3).
User box collective management function
: Prohibited
Network setting modification function with SNMPv1 and v2
: Prohibited
Authentication Operation when writing using SNMPv3
: Valid
Setup of HDD encryption function
: Valid
Print capture function
: Prohibited
Maintenance function
: Prohibited
Change of setting by remote diagnostic function
: Prohibited
Network setting management reset function : Prohibited
TOE update function via Internet
: Prohibited
Transmission address data user setup function
: Prohibited
Operational setup of Trusted Channel function
: Valid
Set up of the release time of operation prohibition for Administrator authentication
: Setup prohibited for 1-4 minutes
Set up of the release time of operation prohibition for CE authentication
: Setup prohibited for 1-4 minutes
FTP Server function
: Prohibited
Automatic registration of S/MIME certificate : Prohibited
Setup of limitation of S/MIME encryption severity
: Valid (Only 3DES and AES are
user-selectable.)
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
17 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
2. Conformance Claims
2.1. CC Conformance Claim
This ST conforms to the following standards.
Common Criteria for Information Technology Security Evaluation
Part 1: Introduction and general model Version 3.1 Revision 3 (Japanese Translation v1.0)
Part 2: Security functional components Version 3.1 Revision 3 (Japanese Translation v1.0)
Part 3: Security assurance components Version 3.1 Revision 3 (Japanese Translation v1.0)
•
Security function requirement : Part2 Extended
•
Security assurance requirement : Part3 Conformant
2.2. PP Claim
There is no PP that is referenced by this ST.
2.3. Package Claim
This ST conforms to Package : EAL3. There is no additional assurance component.
2.4. Reference
•
Common Criteria for Information Technology Security Evaluation Part 1:Introduction and
general model Version 3.1 Revision 3 CCMB-2009-07-001
•
Common Criteria for Information Technology Security Evaluation Part 2:Security functional
components Version 3.1 Revision 3 CCMB-2009-07-002
•
Common Criteria for Information Technology Security Evaluation Part 3:Security assurance
components Version 3.1 Revision 3 CCMB-2009-07-003
•
Common Methodology for Information Technology Security Evaluation
Evaluation methodology Version 3.1 Revision 3 CCMB-2009-07-004
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
18 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
3. Security Problem Definition
This chapter will describe the concept of protected assets, assumptions, threats, and
organizational security policies.
3.1. Protected Assets
Security concept of TOE is "the protection of data that can be disclosed against the intention of
the user". As MFP is generally used, the following image file in available situation becomes the
protected assets.
•
Secure Print file
An image file registered by Secure Print.
•
ID & print file
An image file saved as an ID & print file when print data are registered by the ID & print
function.
•
User Box file
An image file stored in the personal user box, public user box and group user box.
As for a image file of a job kept as a wait state by activities of plural jobs, and a image file of a
job kept that prints the remainder of copies becoming as a wait state for confirmation of the
finish, and other than the image file dealt with the above-mentioned is not intended to be
protected in the general use of MFP, so that it is not treated as the protected assets.
In the print of a secure print file or an ID & print file and the transmission of a user box file,
making in the preparation for the threat thought when unauthorized MFP or mail server is
connected by any chance, or when operational setup of PC-FAX is changed even if without
unauthorized MFP, the setting of MFP (IP address etc.) and operation setting of PC-FAX require
not to be modified illegally. Therefore, the setting of MFP (IP address etc.) and operation setting
of PC-FAX are considered as subsidiary protected assets.
On the other hand, when the stored data have physically gone away from the jurisdiction of a
user, such as the use of MFP ended by the lease return or being disposed, or the case of a theft of
HDD, the user has concerns about leak possibility of every remaining data. Therefore, in this
case, the following data files become protected assets.
•
Secure Print File
•
ID & print File
•
User Box File
•
On-memory Image File
•
Stored Image File
¾
¾
•
Image file of job in the wait state
Stored image files other than secure print file, user box file, or ID & print file
HDD remaining Image File
¾
The file which remains in the HDD data area that is not deleted only by general
deletion operation (deletion of a file maintenance area)
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
19 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
•
Image-related File
¾
•
Temporary data file generated in print image file processing
Transmission Address Data File
¾
File including E-mail address and telephone numbers that become the destination to
transmit an image.
3.2. Assumptions
The present section identifies and describes the assumptions for the environment for using the
TOE.
A.ADMIN (Personnel conditions to be an administrator)
Administrators, in the role given to them, will not carry out a malicious act during the series of
permitted operations given to them.
A.SERVICE (Personnel conditions to be a service engineer)
Service engineers, in the role given to them, will not carry out a malicious act during series of
permitted operations given to them.
A.NETWORK (Network connection conditions for MFP)
•
The intra-office LAN where the MFP with the TOE will be installed is not intercepted.
•
When the intra-office LAN where the MFP with the TOE will be installed is connected to an
external network, access from the external network to the MFP is not allowed.
A.SECRET (Operational condition about secret information)
Each password and encryption passphrase does not leak from each user in the use of TOE.
A.SETTING (Operational setting condition of Enhanced Security function)
•
MFP with the TOE is used after enabling the enhanced security function.
3.3. Threats
In this section, threats that are assumed during the use of the TOE and the environment for
using the TOE are identified and described.
T.DISCARD-MFP (Lease-return and disposal of MFP)
When leased MFPs are returned or discarded MFPs are collected, secure print files, user box
files, ID & print files, on-memory image files, stored image files, HDD-remaining image files,
image-related files, transmission address data files, and various passwords which were set up
can leak by the person with malicious intent when he/she analyzes the HDD or NVRAM in the
MFP.
T.BRING-OUT-STORAGE (An unauthorized carrying out of HDD)
•
Secure print files, user box files, ID & print files, on-memory image files, stored image files,
HDD-remaining image files, image-related files, transmission address data files, and
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
20 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
various passwords which were set up can leak by a malicious person or a user illegally when
he/she brings out the files to analyze the HDD in a MFP.
•
A person or a user with malicious intent illegally replaces the HDD in MFP. In the replaced
HDD, newly created files such as secure print files, user box files, ID & print files,
on-memory image files, stored image files, HDD-remaining image files, image-related files,
transmission address data files and various passwords which were set up are accumulated.
A person or a user with malicious intent takes out to analyze the replaced HDD, so that such
image files will leak.
T.ACCESS-PRIVATE-BOX (Unauthorized access to the personal user box which used a user
function)
Exposure of the user box file when a person or a user with malicious intent accesses the user
box where other user owns, and operates the user box file, such as copies, moves, downloads,
prints, transmits, and so on.
T.ACCESS-PUBLIC-BOX (Unauthorized access to public box which used a user function)
Exposure of the user box file when a person or a user with malicious intent accesses the public
user box which is not permitted to use, and operates the user box file, such as copies, moves,
downloads, prints transmits, and so on.
T.ACCESS-GROUP-BOX (Unauthorized access to the group user box which used a user
function)
Exposure of the user box file when a person or a user with malicious intent accesses the group
user box which the account where a user does not belong to owns, and operates the user box
file, such as copies, moves, downloads, prints transmits, and so on.
T.ACCESS-SECURE-PRINT (Unauthorized access to the secure print file or ID & print file by
utilizing the user function)
•
Secure print files are exposed by those malicious including users when he/she operates, such
as prints, ones to which access is not allowed.
•
ID & print files are exposed by those malicious including users when he/she operates, such
as prints, ones which were stored by other users.
T.UNEXPECTED-TRANSMISSION (Transmission to unintended address)
•
Malicious person or user changes the network settings that are related to the transmission
of a user box file. Even an addressee is set precisely, a user box file is transmitted (the
E-mail transmission or the FTP transmission) to the entity which a user does not intend to,
so that a user box file is exposed.
<The network settings which are related to user box file transmission>
•
¾
Setting related to the SMTP server
¾
Setting related to the DNS server
Malicious person or user changes the network settings which set in MFP to identify MFP
itself where TOE installed, by setting to the value of the entity such as another unauthorized
MFP from the value of MFP (NetBIOS name, AppleTalk printer name, IP address etc) that
TOE is originally installed, so that secure print files or ID & print files are exposed.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
21 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
•
Malicious person or user changes the TSI receiving settings. A user box file is stored to the
entity which a user does not intend to, so that a user box file is exposed.
•
Malicious person or user changes the PC-FAX reception settings. By changing the setting of
the storing for the public user box to store to common area for all users, a user box file is
stored to the entity which a user does not intend to, so that a user box file is exposed.
* This threat exists only in the case that the setting of PC-FAX reception is meant to work as
the operation setting for box storing.
T.ACCESS-SETTING (An unauthorized change of a function setting condition related to
security)
The possibility of leaking user box files, secure print files, or ID & print files rises because
those malicious including users change the settings related to the enhanced security function.
T.BACKUP-RESTORE (Unauthorized use of backup function and restoration function)
User box files, secure print files, or ID & print files can leak by those malicious including users
using the backup function and the restoration function illegally. Also highly confidential data
such as passwords can be exposed, so that settings might be falsified.
3.4. Organizational Security Policies
Recently, there are a lot of organizations that demand security of network in office. Although a
threat of wiretapping activities etc. in intra-office LAN is not assumed in this ST, TOE security
environment that corresponds to the organization that demanded security measures in
intra-office LAN is assumed. Moreover, although a stored data in a client PC and a server
existing in internal network or a general data flowing on internal network is not protected assets,
TOE security environment that corresponds to the organization that prohibit the access to
internal network via Fax public line of MFP is assumed.
The security policies applied in the organization that uses TOE are identified and described as
follows.
P.COMMUNICATION-DATA (Secure communication of image file)
Highly confidential image files (secure print files, user box files, and ID & print files) which
transmitted or received between IT equipment must be communicated via a trusted pass to the
correct destination, or encrypted when the organization or the user expects to be protected.
P.REJECT-LINE (Access prohibition from public line)
An access to internal network from public line via the port of Fax public line must be
prohibited.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
22 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
4. Security Objectives
In this chapter, in relation to the assumptions, the threats, and the organizational security
policy identified in Chapter 3, the required security objectives policy for the TOE and the
environment for the usage of the TOE are described by being divided into the categories of the
security objectives for the TOE and the security objectives for the environment, as follows.
4.1. Security Objectives for the TOE
In this section, the security objectives for the TOE is identified and described.
O.REGISTERED-USER (Utilization of permitted user)
TOE permits only the user who success identification and authentication to use the MFP
installing TOE.
O.PRIVATE-BOX (Personal user box access control)
•
TOE permits only a user to use the user function of the personal user box that this user
owns.
•
TOE permits only a user to use the user function of the use box file in the personal user box
that this user owns.
O.PUBLIC-BOX (Public user box access control)
•
TOE permits the user who success identification and authentication the reading operation of
the public user box.
•
TOE permits the user function of the public user box only to the user who is permitted the
use of this public user box.
•
TOE permits the user function of the user box file in the public user box only to the user who
is permitted the use of this public user box.
O.GROUP-BOX (Group user box access control)
•
TOE permits the user function of the group user box that this account owns only to the user
who is permitted the use of this account.
•
TOE permits the user function of the user box file in the group user box that this account
owns only to the user who is permitted the use of this account.
O.SECURE-PRINT (Access control for secure print files and ID & print files)
•
TOE permits the user function of a secure print file only to the user who was allowed to use
the file.
•
TOE permits the user function of an ID & print file only to the user who stored that file.
O.CONFIG (Access limitation to management function)
TOE permits only the administrator the operation of the following functions.
•
The setting function related to the SMTP server
•
The setting function related to the DNS server
•
The setting function related to the address of MFP
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
23 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
•
Backup function
•
Restoration function
•
The setting function of Trusted Channel function setting data
•
The setting function of certificates, transmission address data, etc used for the S/MIME
function.
•
The setting function of TSI receiving
•
The setting function of PC-FAX reception
•
Counter management function
TOE permits the operation of the following functions only to the administrator and the service
engineer.
•
The function related to the setting of Enhanced Security function
O.OVERWRITE-ALL (Complete overwrite deletion)
TOE overwrites all the data regions of HDD in MFP with deletion data, and makes all image
data unable to restore. In addition, TOE provides a function to initialize settings such as the
highly confidential passwords on NVRAM (administrator passwords, encryption passwords,
SNMP passwords, and WebDAV server passwords) set by a user or an administrator.
O.CRYPT-KEY (Encryption key generation)
TOE generates an encryption key to encrypt and store all the data written in the HDD in the
MFP including image files.
O.FAX-CONTROL (Fax unit control)
TOE provides the control function that prohibits an access to internal network which the MFP
concerned connects with, from public line via the port of Fax public line.
O.TRUSTED-PASS (The use of Trusted Channel)
TOE provides the function that communicates via Trusted Channel the following image file,
which is transmitted and received between MFP and client PC.
< Image file transmitted from MFP to client PC >
•
User box file
< Image file transmitted from client PC to MFP >
•
Image file that will be stored as user box files
•
Image file that will be stored as secure print files
•
Image files that will be stored as ID & print files
O.CRYPTO-MAIL (The use of encrypted mail)
TOE provides the function that encrypts and transmits the user box file transmitted from MFP
to the correct destination with e-mail.
O.AUTH-CAPABILITY (The support operation to utilize user authentication function)
TOE supports the necessary operation to utilize the user authentication function by user
information management server using Active Directory.
O.CRYPTO-CAPABILITY (The support operation to utilize HDD encryption function)
TOE supports necessary mechanical operations to utilize the HDD encryption function by
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
24 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
ASIC.
4.2. Security Objectives for the Operational Environment
In this section, the security objectives for the environment, in the operation environment of the
usage of the TOE, is described.
OE.FEED-BACK (Utilization of application to show secure password)
The administrator and user utilize the application of a browser etc., used by client PC to access
MFP, that provides appropriate protected feedback to the user password, user box password,
account password, administrator password, secure print password, SNMP password, and
WebDAV server password, which will be entered.
OE.SERVER (Utilization of user information management server)
The administrator sets to utilize user management by Active Directory in case of using
external user information management server instead of MFP for the management of user
account.
OE.SESSION (Termination of session after operation)
The administrator has the user implement the following operation.
•
After the operation of secure print files, ID & print files, and the user box and user box files
ends, the logoff operation is performed.
The administrator executes the following operation.
•
After the operation of the various function in administrator mode ends, the logoff operation
is performed
The service engineer executes the following operation.
•
After the operation of the various function in service mode ends, the logoff operation is
performed.
OE.ADMIN (A reliable administrator)
The responsible person in the organization who uses MFP will assign a person who can
faithfully execute the given role during the operation of the MFP with TOE as an
administrator.
OE.SERVICE (The service engineer's guarantee)
•
The responsible person in the organization managing the maintenance of MFP educates a
service engineer in order to faithfully carry out the given role for the installation of the TOE,
the setup of TOE and the maintenance of the MFP with TOE.
•
The administrator observes the maintenance work of MFP with TOE by a service engineer.
OE.NETWORK (Network Environment in which the MFP is connected)
•
The responsible person in the organization who uses MFP carries out the tapping prevention
measures by setting the cipher communications equipment and the tapping detection
equipment to the LAN of the office where MFP with TOE is installed.
•
The responsible person in the organization who uses MFP carries out the measures for the
unauthorized access from the outside by setting up the equipment such as the firewall to
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
25 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
intercept the access from an external network to MFP with TOE.
OE.FAX-UNIT (Utilization of Fax unit)
The service engineer installs Fax unit which is the oprional part on MFP and sets to utilize the
function of Fax unit.
OE.SECRET (Appropriate management of confidential information)
The administrator has the user implement the following operation.
•
Keep the user password and secure print password confidential.
•
Keep the user box password and account password confidential between the users who
commonly utilize it.
•
Should not set the value that can be guessed for the user password, secure print password
and the user box password.
•
The user password and the user box password should be properly changed.
•
When the administrator changes the user password or the user box password, make the user
to change them promptly.
The administrator executes the following operation.
•
Avoid setting an easy-to-guess value on the administrator password, account password,
SNMP password, encryption passphrase, and WebDAV server password.
•
Keep the administrator password, account password, SNMP password, encryption
passpharse and WebDAV server password confidential.
•
Change the administrator password, account password, SNMP password, encryption
passphrase, and WebDAV server password appropriately.
The service engineer executes the following operation.
•
Should not set the value that can be guessed for the CE password.
•
Keep the CE password confidential.
•
The CE password should be properly changed.
•
When the service engineer changes the administrator password, make the administrator to
change it promptly.
OE.SETTING-SECURITY (Operational setup of Enhanced Security function)
The administrator makes the setup of the enhanced security function effective for the operation
of TOE.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
26 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
4.3. Security Objectives Rationale
4.3.1. Necessity
The correspondence between the assumptions, threats and security objectives are shown in the
following table. It shows that the security objectives correspond to at least one assumption or
threat.
Table 1 Conformity of security objectives to assumptions, threats, and organization security policies
X
X
X
X
X
P.REJECT-LINE
X
P.COMMUNICATION-DATA
T.ACCESS-SECURE-PRINT
X
T.BACKUP-RESTORE
T.ACCESS-GROUP-BOX
O.REGISTERED-USER
O.PRIVATE-BOX
O.PUBLIC-BOX
O.GROUP-BOX
O.SECURE-PRINT
O.CONFIG
O.OVERWRITE-ALL
O.CRYPTO-KEY
O.TRUSTED-PASS
O.CRYPTO-MAIL
O.FAX-CONTROL
O.CRYPTO-CAPABILITY
O.AUTH-CAPABILITY
OE.FEED-BACK
OE.SERVER
OE.SESSION
OE.ADMIN
OE.SERVICE
OE.NETWORK
OE.FAX-UNIT
OE.SECRET
OE.SETTING-SECURITY
T.ACCESS-SETTING
T.ACCESS-PUBLIC-BOX
X
X
Security objectives policy
T.UNEXPECTED-TRANSMISSION
T.ACCESS-PRIVATE-BOX
T.BRING-OUT-STORAGE
T.DISCARD-MFP
A.SETTING
A.SECRET
A.NETWORK
A.SERVICE
A.ADMIN
Organization security
policies
Assumptions
Threats
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
27 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
4.3.2. Sufficiency of Assumptions
The security objectives for the assumptions are described as follows.
z A.ADMIN (Personnel Conditions to be an Administrator)
This condition assumes that administrators are not malicious.
With OE.ADMIN, the organization that uses the MFP assigns personnel who are reliable in
the organization that uses the MFP, so the reliability of the administrator is realized.
z A.SERVICE (Personnel Conditions to be a Service Engineer)
This condition assumes the service engineer are not malicious.
With OE.SERVICE, the organization that manages the maintenance of the MFP educates the
service engineer. Also the administrator needs to observe the maintenance of the MFP, so that
the reliability of service engineers is assured.
z A.NETWORK (Network Connection Conditions for the MFP)
This condition assumes that there are no wiretapping activities for the intra-office LAN and
no access by an unspecified person from an external network.
OE.NETWORK regulates the wiretapping prevention by the installation of devices such as a
wiretapping detection device and device to perform the encryption communication on the
intra-office LAN. It also regulates the unauthorized access prevention from external by the
installation of devices such as firewall in order to block access to the MFP from the external
networks, so that this condition is realized.
z A.SECRET (Operating condition concerning confidential information)
This condition assumes each password and encryption passphrase using for the use of TOE
should not be leaked by each user.
OE.SECRET regulates that the administrator makes the user to execute the operation rule
concerning the secure print password, user box password, user password, and account
password and that the administrator executes the operation rule concerning the
administrator password, SNMP password, encryption passphrase, account password, and
WebDAV server password. It also regulates that the service engineer executes the operation
rule concerning the CE password, and that the service engineer makes the administrator to
execute the operation rule concerning the administrator password, so that this condition is
realized.
z A.SETTING (Enhanced Security Function Operational Setup Condition)
This condition assumes the enhanced security function operational settings condition is
satisfied.
OE.SETTING-SECURITY regulates that this is used after the administrator activates the
enhanced security function, so that this condition is realized.
4.3.3. Sufficiency of Threats
The security objectives against threats are described as follows.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
28 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
z T.DISCARD-MFP (Lease return and disposal of MFP)
This threat assumes the possibility of leaking information from MFP collected from the user.
O.OVERWRITE-ALL is that TOE provides the function to overwrite data for the deletion of
all area of HDD and initializes the information of NVRAM, so that the possibility of the
threat is removed by executing this function before MFP is collected.
Accordingly, this threat is countered sufficiently.
z T.BRING-OUT-STORAGE (Unauthorized bring-out of HDD)
This threat assumes the possibility that the image data in HDD leaks by being stolen from
the operational environment under MFP used or by installing the unauthorized HDD and
taking away with the data accumulated in it.
For the above, the possibility of the threat is reduced because O.CRYPTO-KEY assumes that
TOE generates an encryption key to encrypt the data written in the HDD, and a mechanical
operation
to
use
the
HDD
encryption
function
by
ASIC
is
supported
by
O.CRYPTO-CAPABILITY.
Accordingly, this threat is countered sufficiently.
z T.ACCESS-PRIVATE-BOX (Unauthorized access to personal user box using user function)
This threat assumes the possibility that an unauthorized operation is done by using the user
function for the personal user box which each user uses to store the image file.
O.REGISTERED-USER is assumed that only the user to whom TOE succeed idetification and
authentication is permitted to use MFP installed TOE, furthermore, the operation of a
personal user box and the user box file in a personal user box is restricted only to the user
who is the owner by O.PRIVATE-BOX, so that the possibility of the threat is reduced. When
the user information management server is used, the possibility of the threat is reduced
because
the
user
identification
and
authentication
is
operated
through
O.AUTH-CAPABILITY supporting the operation for the user authentication function by the
user information management server of Active Directory and through OE.SERVER setting to
use the user management by the administrator.
OE.FEED-BACK uses the application regulating to return the protected feedback for the
entered password in the user's authentication, and OE.SESSION also requires the log-off
operation after the operation ends, so that O.REGISTERED-USER and O.PRIVATE-BOX are
supported sufficiently.
Accordingly, this threat is countered sufficiently.
z T.ACCESS-PUBLIC-BOX (Unauthorized access to public user box using user function)
This threat assumes the possibility that an unauthorized operation is done by using the user
function for the public user box which each user shares to store the image file.
O.REGISTERED-USER assumes that only the user to whom TOE succeed idetification and
authentication is permitted to use MFP installing TOE, furthermore, the operation of the
public user box and the user box file in the public user box is restricted only to the user who is
permitted by O.PUBLIC-BOX, so that the possibility of the threat is reduced. When the user
information management server is used, the possibility of the threat is reduced because the
user identification and authentication is operated through O.AUTH-CAPABILITY supporting
the operation for the user authentication function by the user information management
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
29 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
server of Active Directory and through OE.SERVER setting to use the user management by
the administrator.
OE.FEED-BACK uses the application regulating to return the protected feedback for the
entered password in the user's authentication and user box's authentication, and
OE.SESSION
requires
the
log-off
operation
after
the
operation
ends,
so
that
O.REGISTERED-USER and O.PUBLIC-BOX are supported sufficiently.
Accordingly, this threat is countered sufficiently.
z T.ACCESS-GROUP-BOX (Unauthorized access to a group user box using user function)
This threat assumes the possibility that an unauthorized operation is performed by using the
user function for the group box that is a storage area of image file used by user who is
permitted the use of the account, or the user box file in it.
O.REGISTERED-USER assumes that only the user to whom TOE succeed idetification and
authentication is permitted to use MFP installed TOE, furthermore, the operation of the
group user box and user box file in the group user box is restricted only to the permitted user
by O.GROUP-BOX, so that the possibility of the threat is removed. When the user
information management server is used, the possibility of the threat is reduced because the
user
identification
and
authentication is
operated
through
O.AUTH-CAPABILITY
supporting the operation for the user authentication function by the user information
management server of Active Directory and through OE.SERVER setting to use the user
management by the administrator.
OE.FEED-BACK uses the application regulating to return the protected feedback for the
entered password in the user's authentication and account's authentication, and
OE.SESSION also requires the log-off operation after the operation ends, so that
O.REGISTERED-USER and O.GROUP-BOX are supported sufficiently.
Accordingly, this threat is countered sufficiently.
z T.ACCESS-SECURE-PRINT (Unauthorized access to a secure print file or an ID & print file
using the user function)
This threat assumes the possibility that an unauthorized operation is done to the secure print
and ID & print using user function.
O.REGISTERED-USER assumes that only the user to whom TOE succeed idetification and
authentication is permitted to use MFP installing TOE, furthermore, the operations of the
secure print and ID & print are limited only to the authorized user by O.SECURE-PRINT, so
that the possibility of the threat is reduced. When the external user information management
server is used, the possibility of the threat is reduced because the user identification and
authentication is operated through O.AUTH-CAPABILITY supporting the operation for the
user authentication function by the user information management server of Active Directory
and through OE.SERVER setting to use the user management by the administrator.
OE.FEED-BACK uses the application regulating to return the protected feedback for the
entered password in the user's authentication and access authentication to the secure print,
and OE.SESSION requires the log-off operation after the operation ends, so that
O.REGISTERED-USER and O.SECURE-PRINT are supported sufficiently.
Accordingly, this threat is countered sufficiently.
z T.UNEXPECTED-TRANSMISSION (Transmission to unintended address)
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
30 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
This threat assumes the possibility of sending the user box file to the address that isn't
intended, when the network setting that relates to the transmission is illegally changed. This
is concerned about a possibility that the user box file is transmitted to the specified server
illegally without the change of the network environment constitution by the malicious person
by, for instance, illegally being changed the address of the SMTP server that relays E-mail for
the E-mail, or illegally being changed the address of the DNS server where the domain name
is inquired when the address of the SMTP server is used for a search of the domain name.
For FTP transmission, by being likely to use the mechanism of the search of the domain name
is concerned about the similar possibility of the incident might be occurred by E-mailing.
Furthermore, when the network setting which is related to the address of MFP is modified
illegally, it assumes the possibility to use the print function to the unauthorized entity from
client PC by the user who believes as TOE. Especially, it becomes a problem if a secure print
file or an ID & print file which is required to be concealed from other users in the office is
transmitted to the unauthorized entity.
In addition to this, the setting of PC-FAX reception and the setting of TSI reception assumes
the possibility of unintended box file storing at FAX reception.
On the other hand, O.CONFIG regulates that the role to operate the network setting relating
to the transmission of TOE, the setting of PC-FAX reception and the setting of TSI reception
are limited to the administrator, and so the possibility of this threat is removed.
OE.FEED-BACK uses the application regulating that the feedback protected is returned for
the entered password by the administrator's authentication and OE.SESSION requires to
logoff after the operation ends, so that O.CONFIG is supported sufficiently.
Accordingly, this threat is countered sufficiently.
z T.ACCESS-SETTING (Unauthorized change of function setting condition related to security)
This threat assumes the possibility of developing consequentially into the leakage of the user
box files, secure print files, or ID & print files by having been changed the specific function
setting which relates to security.
O.CONFIG regulates that only the administrator is permitted to perform the setup of the
enhanced security function that controls all setting function related to a series of security, and
so the possibility of the threat is removed.
OE.FEED-BACK uses the application regulating that the feedback protected is returned for
the entered various passwords by the administrator's authentication, and OE.SESSION is
also requested to logoff respectively after the operations of the administrator mode ends, so
that O.CONFIG is supported sufficiently.
Accordingly, this threat is countered sufficiently.
z T.BACKUP-RESTORE (Unauthorized use of back-up function and restoration function)
This threat assumes a possibility that user box files, secure print files, or ID & print files may
leak when the back-up function or the restoration function is illegally used. Moreover, this
assumes that confidential data such as passwords might leak or various settings are falsified,
so that user box files, secure print files, or ID & print files may leak.
O.CONFIG regulates that the use of the back-up function and the restoration function is
permitted only to the administrator, so that the possibility of the threat is removed.
OE.FEED-BACK uses the application regulating that the protected feedback is returned for
the entered password by the administrator authentication and OE.SESSION is also
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
31 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
requested the log-off operation after the operation ends, and so O.CONFIG is sufficiently
supported.
Accordingly, this threat is countered sufficiently.
4.3.4. Sufficiency of Organizational Security Policies
Security objective corresponding to organizational security policies is explained as follows.
z P.COMMUNICATION-DATA (secure communication of image file)
This organizational security policy prescribes carrying out processing via trusted pass to a
correct destination or encrypting to ensure the confidentiality about the image file which
flows on a network in the case of the organization or the user expect to be protected. As this
corresponds as one's request, there is no need to provide secure communication function for
all communication. At least one secure communication method between MFP and client PC
needs to be provided when transmitting the secure print file or the user box file.
O.TRUSTED-PASS provides Trusted Channel to a correct destination in the transmission
and reception of an image between MFP and client PCs for user box files, secure print files,
and ID & print files that save confidential images, so that the organizational security policies
is achieved.
Also, the security objective provides the transmission function to a correct destination by
encrypting the user box file transmitted by e-mail from MFP to client PC by
O.CRYPTO-MAIL, so that the organizational security policies is achieved.
Furthermore, O.CONFIG restricts the Trusted Channel function setting data, the
management of the user box files' encryption by e-mail and the transmission address data to
the administrator. And, OE.FEED-BACK uses the application regulating that the protected
feedback is returned for the entered password in the administrator's authentication, and
OE.SESSION is also regulated to log off after the operations of the administrator mode ends,
so that O.CONFIG is supported.
Accordingly, this organizational security policy is sufficiently to achieve.
z P.REJECT-LINE (Access prohibition from public line)
This organizational security policy prohibits being accessed to a stored data in a client PC
and a server existing in internal network or a general data flowing on internal network from
public line via the port of Fax public line on Fax unit installed to MFP.
This means that communication, like remote diagnostic function or illegal operation
command, except image data which is sent from public line network and forwarded to
internal network via the port of Fax public line of MFP is not forwarded to internal network,
even though Fax unit is installed on MFP at the request of the organization.
O.FAX-CONTROL prohibits the access to the data existing in internal network including a
general data from public line via the port of Fax public line.
Also, OE.FAX-UNIT is regulated to install Fax unit which is the oprional part on MFP by
service engineer, so that O.FAX-CONTROL is supported.
Accordingly, this organizational security policy is achieved.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
32 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
5. Extended Components Definition
5.1. Extended Function Component
In this ST, three extended function components are defined. The necessity of each security
function requirement and the reason of the labeling definition are described.
z FAD_RIP.1
This is the security function requirement for the protection of the remaining information of
user data and TSF data.
¾ Necessity of extension
The regulation for the protection of the TSF data remaining information is necessary. But
the security function requirement to explain the protection of the remaining information
exists only in FDP_RIP.1 for the user data. There is no security function requirement to
satisfy this requirement.
¾ Reason for applied class (FAD)
There is no requirement to explain both of the user data and the TSF data with no
distinction. Therefore, new Class was defined.
¾ Reason for applied family (RIP)
As this is the extension up to the TSF data by using the content explained by the relevant
family of FDP class, the same label of this family was applied.
z FIT_CAP.1
This is the security function requirement for regulating the necessary ability for TOE to use
effectively the security function of the external entity, IT environment.
¾ Necessity of extension
In case of TOE using the external security functions, the external security function to be
surely secure is important, but TOE ability to provide is very important in order to use
correctly the external security function. But there is no concept as this requirement in the
security function requirements.
¾ Reason for applied class (FIT)
There is no such concept in CC part 2. Therefore, new Class was defined.
¾ Reason for applied family (CAP.1)
As similar to class, there is no such concept in CC part 2. Therefore, new Family was
defined.
5.1.1. FAD_RIP.1 Definition
z Class name
FAD: Protection of all data
Meaning of abbreviation: FAD (Functional requirement for All Data protection)
z Class behavior
This class contains a family specifying the requirement related with the protection of the user
data and the TSF data with no distinction. One family exists here.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
33 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
- Remaining Information Protection of All Data (FAD_RIP);
z Family behavior
This family corresponds to the necessity never to access the deleted data or newly created
object and TSF data which should not set as accessible. This family requires the protection for
the information that was deleted or released logically but has a possibility to exist still in
TOE.
z Component leveling
FAD_RIP:
Remaining Information Protection of All Data
1
FAD_RIP.1: "Remaining Information Protection of All Data after the explicit deletion
operation" requires of TSF to assure that the subset of the defined object controlled by TSF
cannot utilize every remaining information of every resource under the allocation of resource
or the release of it.
Audit : FAD_RIP.1
The use of the user identification information with the explicit deletion operation
Management : FAD_RIP.1
No expected management activity
FAD_RIP.1
Remaining Information Protection of All Data after the explicit
deletion operation
FAD_RIP.1.1
TSF shall ensure that the content of the information allocated to source before shall not be available
after the explicit deletion operation against the object and TSF data.: [assignment: list of object and list
of TSF data]
Hierarchical to
: No other components
Dependencies
: No dependencies
5.1.2. FIT_CAP.1 Definition
z Class name
FIT: Support for IT environment entity
Meaning of abbreviation: FIT (Functional requirement for IT environment support)
z Class behavior
This class contains a family specifying the requirement related with the use of the security
service provided by IT environment entity. One family exists here.
- Use of IT environment entity (FIT_CAP);
z Family behavior
This family corresponds to the capability definition for TOE at the use of security function of
IT environment entity.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
34 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
z Component leveling
FIT_CAP:
Capability of using IT environment entity
1
Meaning of abbreviation: CAP (CAPability of using it environment)
FIT_CAP.1: "Capability of using security service of IT environment entity" corresponds to the
substantiation of capability needed to use the security function correctly provided by IT
environment entity.
Audit : FIT_CAP.1
The following actions should be auditable if FAU_GEN Security audit data generation is included in the
PP/ST.
a) Minimal
Failure of operation for IT environment entity
b) Basic
Use all operation of IT environment entity (success, failure)
Management : FIT_CAP.1
The following actions could be considered for the management functions in FMT.
There is no management activity expected
FIT_CAP.1
Capability of using security service of IT environment entity
FIT_CAP.1.1
TSF shall provide the necessary capability to use the service for [assignment: security service provided
by IT environment entity]. : [assignment: necessary capability list for the operation of security service]
Hierarchical to
: No other components
Dependencies
: No dependencies
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
35 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
6. IT Security Requirements
In this chapter, the TOE security requirements are described.
<Definition of Label>
The security function requirements required for the TOE are described. Those regulated in CC
Part 2 will be directly used for the functional requirements components, and the same labels will
be used as well. The new additional requirement which is not described in CC part 2 is newly
established and identified with the label that doesn't compete with CC part 2.
< Method of specifying security function requirement "Operation" >
In the following description, when items are indicated in "italic" and "bold," it means that they
are assigned or selected. When items are indicated in "italic" and "bold" with parenthesis right
after the underlined original sentences, it means that the underlined sentences are refined. A
number in the parentheses after a label means that the functional requirement is used
repeatedly.
<Method of clear indication of dependency>
The label in the parentheses "( )" in the dependent section indicates a label for the security
functional requirements used in this ST. When it is a dependency that is not required to be used
in this ST, it is described as "N/A" in the same parentheses.
6.1. TOE Security Requirements
6.1.1. TOE Security Function Requirements
6.1.1.1. Cryptographic Support
Cryptographic key generation
FCS_CKM.1
FCS_CKM.1.1
The TSF shall generate cryptographic keys in accordance with a specified cryptographic key generation
algorithm [assignment: cryptographic key generation algorithm] and specified cryptographic key sizes
[assignment: cryptographic key sizes] that meet the following: [assignment: list of standards].
[assignment: list of standards] :
Listed in "Table2 Cryptographic key generation
Relation of Standards-Algorithm-Key sizes"
[assignment: cryptographic key generation algorithm] :
Listed in "Table2 Cryptographic key generation
Relation of Standards-Algorithm-Key sizes"
[assignment: cryptographic key sizes] :
Listed in "Table2 Cryptographic key generation
Relation of Standards-Algorithm-Key sizes"
Hierarchical to
Dependencies
:
:
No other components
FCS_CKM.2 or FCS_COP.1 (FCS_COP.1, FCS_CKM.4 (N/A)
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
36 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
Table 2 Cryptographic Key Generation:
List of Standards
Relation of Standards-Algorithm-Key sizes
Cryptographic Key Generation Algorithm
FIPS 186-2
Pseudorandom number Generation Algorithm
Cryptographic Key sizes
- 128 bits
- 192 bits
- 168 bits
- 256 bits
Konica Minolta
Konica Minolta HDD Encryption Key Generation
Encryption
Algorithm
- 128 bits
specification standard
Cryptographic operations
FCS_COP.1
FCS_COP.1.1
The TSF shall perform [assignment: list of Cryptographic operations] in accordance with a specified
cryptographic algorithm [assignment: cryptographic algorithm] and cryptographic key sizes
[assignment: cryptographic key sizes] that meet the following: [assignment: list of standards].
[assignment: list of standards] :
Listed in "Table3 Cryptographic operation
Relation of Algorithm-Key sizes-Cryptographic operation"
[assignment: cryptographic algorithm] :
Listed in "Table3 Cryptographic operation
Relation of Algorithm-Key sizes-Cryptographic operation"
[assignment: cryptographic key sizes] :
Listed in "Table3 Cryptographic operation
Relation of Algorithm-Key sizes-Cryptographic operation"
[assignment: list of cryptographic operation] :
Listed in "Table3 Cryptographic operation
Relation of Algorithm-Key sizes-Cryptographic operation"
Hierarchical to
Dependencies
:
:
No other components
FDP_ITC.1 or FDP_ITC.2 or FCS_CKM.1 (FCS_CKM.1 ( only a part of events)),
FCS_CKM.4 (N/A)
Table 3 Cryptographic Operation:
Relation of Algorithm-Keysizes-Cryptographic Operation
List of
Cryptographic
Cryptographic
standards
algorithm
key sizes
FIPS PUB 197
AES
- 128 bits
Contents of Cryptographic operation
Encryption of S/MIME transmission data
- 192 bits
- 256 bits
SP800-67
3-Key-Triple-DES
- 168 bits
Encryption of S/MIME transmission data
FIPS 186-2
RSA
- 1024 bits
Encryption of cryptographic key to encrypt
- 2048 bits
S/MIME transmission data
- 3072 bits
- 4096 bits
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
37 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
6.1.1.2. User Data Protection
Subset access control
FDP_ACC.1[1]
FDP_ACC.1.1[1]
The TSF shall enforce the [assignment: access control SFP] on [assignment: list of subjects, objects, and
operations among subjects and objects covered by the SFP].
[assignment: list of subjects, objects, and operations among subjects and objects covered by the SFP] :
Listed in "Table4 User box access control operational list "
[assignment: access control SFP] :
User Box access control
Hierarchical to
Dependencies
:
:
No other components
FDP_ACF.1 (FDP_ACF.1[1])
Table 4 User Box Access Control:
Subject
Operational List
Object
A task to act for a user
User Box
User Box File
Operational List
- List
- Print
- Transmission (E-mail transmission, FTP transmission,
SMB transmission, FAX transmission and WebDAV
transmission)
- Download
- Move to other user boxes
- Copy to other user boxes
- Copy to external memory
- Backup
Subset access control
FDP_ACC.1[2]
FDP_ACC.1.1[2]
The TSF shall enforce the [assignment: access control SFP] on [assignment: list of subjects, objects, and
operations among subjects and objects covered by the SFP].
[assignment: list of subjects, objects, and operations among subjects and objects covered by the SFP] :
Listed in "Tabel5 Secure print file access control operational list"
[assignment: access control SFP] :
Secure print file access control
Hierarchical to
Dependencies
:
:
No other components
FDP_ACF.1 (FDP_ACF.1[2])
Table 5 Secure Print File Access Control:
Subject
A task to act for a user
FDP_ACC.1[3]
Operational List
Object
Secure Print File Access Control
Operational list
- List
- Print
- Back-Up
Subset access control
FDP_ACC.1.1[3]
The TSF shall enforce the [assignment: access control SFP] on [assignment: list of subjects, objects, and
operations among subjects and objects covered by the SFP].
[assignment: list of subjects, objects, and operations among subjects and objects covered by the SFP] :
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
38 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
Listed in "Table6 Setting management access control operational list"
[assignment: access control SFP] :
Setting management access control
Hierarchical to
Dependencies
:
:
No other components
FDP_ACF.1 (FDP_ACF.1[3])
Table 6 Setting Management Access Control:
Subject
Operational List
Object
Operational list
A task to act for a user
- SMTP Server Group Object
- DNS Server Group Object
- MFP Address Group Object 8
- PC-FAX reception setting Object
- Transmission Address Data Object
FDP_ACC.1[4]
Subset access control
- Settings
- Restore
FDP_ACC.1.1[4]
The TSF shall enforce the [assignment: access control SFP] on [assignment: list of subjects, objects, and
operations among subjects and objects covered by SFP].
[assignment: list of subjects, objects, and operations among subjects and objects covered by SFP] :
Listed in "Table7 ID & print file Access Control operational list"
[assignment: access control SFP] :
ID & print file access control
Hierarchical to
Dependencies
:
:
No other components
FDP_ACF.1 (FDP_ACF.1[4])
Table 7 ID & Print file Access Control:
Subject
Operational List
Object
A task to act for a user
ID & print File
FDP_ACF.1[1]
Security attribute based access control
Operational list
- List
- Print
- Backup
FDP_ACF.1.1[1]
The TSF shall enforce the [assignment: access control SFP] to objects based on the following: [assignment:
list of subjects and objects controlled under the indicated SFP, and for each, the SFP-relevant security
attributes, or named groups of SFP-relevant security attributes].
[assignment: list of subjects and objects controlled under the indicated SFP, and for each, the
SFP-relevant security attributes, or named groups of SFP-relevant security attributes] :
<Subject>
<Subject attributes>
- A task to act for a user
Æ - User Attribute (User ID)
- Account Name (Account ID)
- User Box Attribute (User Box ID)
- Administrator Attribute
---------------------------------------------------------------------------------------------------------------------------------------------<Object>
<Object attributes>
- User Box
Æ - User Attribute (User ID or Public or Account ID)
- User Box File
Æ - User Box Attribute (User Box ID)
[assignment: access control SFP] :
8
The MFP address group object is a series of data concerning the address of the main body of MFP such as IP
address and the Appletalk printer name.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
39 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
User Box access control
FDP_ACF.1.2[1]
The TSF shall enforce the following rules to determine if an operation among controlled subjects and
controlled objects is allowed: [assignment: rules governing access among controlled subjects and
controlled objects using controlled operations on controlled objects].
[assignment: rules governing access among controlled subjects and controlled objects using controlled
operations on controlled objects] :
<Operation control to Personal user box>
A task to act for a user is permitted to do the list display operation to the user box with the user
attribute (user ID) of an object attribute corresponding to the user attribute (user ID) of the subject
attribute.
<Operation control to Group user box>
A task to act for a user is permitted to do the list display operation to the user box with the Account
Name (account ID) of an object attribute corresponding to the Account Name (account ID) of the
subject attribute.
<Operation control to Public user box>
A task to act for the user who is related to the user attribute (user ID) is permitted to do the list
display operation to the user box where "Public" is set to the user attributes of the object attribute.
<Operational control to User box file>
A task to act for a user is permitted to print, transmit (E-mail transmission, FTP transmission, SMB
transmission, FAX transmission and WebDAV transmission), download, move to other user boxes,
copy to the other user boxes and copy to external memory, to the user box file that have the matched
the user box attribute (user box ID) of the object attribute with the user box attribute (user box ID) of
the subject attribute.
FDP_ACF.1.3[1]
The TSF shall explicitly authorise access of subjects to objects based on the following additional rules:
[assignment: rules, based on security attributes, that explicitly authorise access of subjects to objects].
[assignment: rules, based on security attributes, that explicitly authorise access of subjects to objects] :
- A task to act for the user that has a administrator attribute is permitted to operate displaying of user
box list.
- A task to act for the user that has a administrator attribute is permitted to operate the back-up the
user box file.
FDP_ACF.1.4[1]
The TSF shall explicitly deny access of subjects to objects based on the following additional rules:
[assignment: rules, based on security attributes that explicitly deny access of subjects to objects].
[assignment: rules, based on security attributes, that explicitly deny access of subjects to objects] :
None
Hierarchical to
Dependencies
FDP_ACF.1[2]
:
:
No other components
FDP_ACC.1 (FDP_ACC.1[1]) , FMT_MSA.3 (FMT_MSA.3[1], FMT_MSA.3[3])
Security attribute based access control
FDP_ACF.1.1[2]
The TSF shall enforce the [assignment: access control SFP] to objects based on the following: [assignment:
list of subjects and objects controlled under the indicated SFP, and for each, the SFP-relevant security
attributes, or named groups of SFP-relevant security attributes].
[assignment: list of subjects and objects controlled under the indicated SFP, and for each, the SFP-relevant
security attributes, or named groups of SFP-relevant security attributes] :
<Subject>
<Subject attributes>
- task substituted for a user Æ - File attributes (Secure print internal control ID)
- User attributes (User ID)
- Administrator attributes
---------------------------------------------------------------------------------------------------------------------------------------------Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
40 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
<Object>
<Object attributes>
- Secure print file
Æ - File attributes (Secure print internal control ID)
[assignment: access control SFP] :
Secure print file access control
FDP_ACF.1.2[2]
The TSF shall enforce the following rules to determine if an operation among controlled subjects and
controlled objects is allowed: [assignment: rules governing access among controlled subjects and controlled
objects using controlled operations on controlled objects].
[assignment: rules governing access among controlled subjects and controlled objects using controlled
operations on controlled objects] :
- A task to act for a user who has a user attribute (user ID) is permitted to display of the list of all the
secure print files.
- A task to act for a user who has the file attribute (the secure print internal control ID) is permitted the
print operation to the secure print file that has matched the file attribute (secure print internal control
ID) with the file attribute (secure print internal control ID).
FDP_ACF.1.3[2]
The TSF shall explicitly authorise access of subjects to objects based on the following additional rules:
[assignment: rules, based on security attributes, that explicitly authorise access of subjects to objects].
[assignment: rules, based on security attributes, that explicitly authorise access of subjects to objects] :
A task to act for a user who has a administrator attribute is permitted to back up secure print file.
FDP_ACF.1.4[2]
The TSF shall explicitly deny access of subjects to objects based on the following additional rules:
[assignment: rules, based on security attributes, that explicitly deny access of subjects to objects].
[assignment: rules, based on security attributes, that explicitly deny access of subjects to objects] :
None
Hierarchical to
Dependencies
FDP_ACF.1[3]
:
:
No other components
FDP_ACC.1 (FDP_ACC.1[2]) , FMT_MSA.3 (FMT_MSA.3[2])
Security attribute based access control
FDP_ACF.1.1[3]
The TSF shall enforce the [assignment: access control SFP] to objects based on the following: [assignment:
list of subjects and objects controlled under the indicated SFP, and for each, the SFP-relevant security
attributes, or named groups of SFP-relevant security attributes].
[assignment: list of subjects and objects controlled under the indicated SFP, and for each, the
SFP-relevant security attributes, or named groups of SFP-relevant security attributes] :
<Subject>
<Subject attributes>
- Task substituted for a user
Æ - Administrator attributes
---------------------------------------------------------------------------------------------------------------------------------------------<Object>
- SMTP server group object
- DNS server group object
- MFP address group object
- PC-FAX reception setting object
- Transmission Address data object
* No Object Attribute
[assignment: access control SFP] :
Setting management access control
FDP_ACF.1.2[3]
The TSF shall enforce the following rules to determine if an operation among controlled subjects and
controlled objects is allowed: [assignment: rules governing access among controlled subjects and
controlled objects using controlled operations on controlled objects].
[assignment: rules governing access among controlled subjects and controlled objects using controlled
operations on controlled objects] :
- A task act for a user who has a administrator attribute is permitted to set the SMTP server group
object, the DNS server group object, the MFP address group object, the PC-FAX reception setting
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
41 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
object, and the transmission address data object and to operate the restoration.
FDP_ACF.1.3[3]
The TSF shall explicitly authorise access of subjects to objects based on the following additional rules:
[assignment: rules, based on security attributes, that explicitly authorise access of subjects to objects].
[assignment: rules, based on security attributes, that explicitly authorise access of subjects to objects] :
None
FDP_ACF.1.4[3]
The TSF shall explicitly deny access of subjects to objects based on the following additional rules:
[assignment: rules, based on security attributes, that explicitly deny access of subjects to objects].
[assignment: rules, based on security attributes, that explicitly deny access of subjects to objects] :
None
Hierarchical to
Dependencies
:
:
No other components
FDP_ACC.1 (FDP_ACC.1[3]) , FMT_MSA.3 (N/A)
Security attribute based access control
FDP_ACF.1[4]
FDP_ACF.1.1[4]
The TSF shall enforce the [assignment: access control SFP] to objects based on the following: [assignment:
list of the subjects and objects controlled under the indicated SFP, and for each, SFP-relevant security
attributes, or named groups of SFP-relevant security attributes].
[assignment: list of the subjects and objects controlled under the indicated SFP, and for each,
SFP-relevant security attributes, or named groups of SFP-relevant security attributes] :
<Subject>
<Subject attributes>
- Task substituting for a user
Æ - User attributes (user ID)
- Administrator attributes
---------------------------------------------------------------------------------------------------------------------------------------------<Object>
<Object attributes>
- ID & print file
Æ - User attributes (user ID)
[assignment: access control SFP] :
ID & print file access control
FDP_ACF.1.2[4]
The TSF shall enforce the following rules to determine if an operation among controlled subjects and
controlled objects is allowed: [assignment: rules governing access among controlled subjects and
controlled objects using controlled operations on controlled objects].
[assignment: rules governing access used for controlled operations to controlled objects among controlled
subjects and controlled objects] :
- A task substituting for a user is permitted to list and print the ID & print file whose user attributes of
the object attributes are equal to those of the subject attributes (user ID).
FDP_ACF.1.3[4]
The TSF shall explicitly authorise access of subjects to objects based on the following supplemental rules:
[assignment: rules, based on security attributes, that explicitly authorise access of subjects to objects].
[assignment: rules, based on security attributes, that explicitly authorise access of subjects to objects] :
A task substituting for a user with the administrator attributes is permitted to back up ID & print files.
FDP_ACF.1.4[4]
The TSF shall explicitly deny access of subjects to objects based on the following additional rules:
[assignment: rules, based on security attributes, that explicitly deny access of subjects to objects].
[assignment: rules, based on security attributes, that explicitly deny access of subjects to objects] :
None
Hierarchical to
Dependencies
FDP_IFC.1
:
:
No other components
FDP_ACC.1 (FDP_ACC.1[4]) , FMT_MSA.3 (FMT_MSA.3[4])
Subset information flow control
FDP_IFC.1.1
The TSF shall enforce the [assignment: information flow control SFP] on [assignment: list of subjects,
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
42 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
information, and operations that cause controlled information to flow to and from controlled subjects
covered by the SFP].
[assignment: list of subjects, information, and operations that cause controlled information to flow to and
from controlled subjects covered by the SFP] :
<Subject>
- Reception from Fax unit
<Information>
- Received data from public line
<Operation>
- Send to internal network
[assignment: information flow control SFP] :
Fax information flow control
Hierarchical to
Dependencies
:
:
No other components
FDP_IFF.1(FDP_IFF.1)
Simple security attributes
FDP_IFF.1
FDP_IFF.1.1
The TSF shall enforce the [assignment: information flow control SFP] based on the following types of
subject and information security attributes: [assignment: list of subjects and information controlled under
the indicated SFP, and for each, the security attributes].
[assignment: information flow control SFP] :
Fax information flow control
[assignment: list of subjects and information controlled under the indicated SFP, and for each, the
security attributes] :
<Subject>
- Reception from Fax unit
<Information>
- Received data from public line
<Security attribute>
- Image data attribute
- Data attribute except image data
FDP_IFF.1.2
The TSF shall permit an information flow between a controlled subject and controlled information via a
controlled operation if the following rules hold: [assignment: for each operation, the security
attribute-based relationship that must hold between subject and information security attributes].
[assignment: for each operation, the security attribute-based relationship that must hold between subject
and information security attributes] :
Does not send data except image data received from FAX unit to internal network.
FDP_IFF.1.3
The TSF shall enforce the [assignment: additional information flow control SFP rules].
[assignment: additional information flow control SFP rules] :
None
FDP_IFF.1.4
The TSF shall explicitly authorise an information flow based on the following rules: [assignment: rules,
based on security attributes, that explicitly authorise information flows].
[assignment: rules, based on security attributes, that explicitly authorise information flows] :
None
FDP_IFF.1.5
The TSF shall explicitly deny an information flow based on the following rules: [assignment: rules, based
on security attributes, that explicitly deny information flows].
[assignment: rules, based on security attributes, that explicitly deny information flows] :
None
Hierarchical to
Dependencies
:
:
No other components
FDP_IFC.1(FDP_IFC.1) , FMT_MSA.3 (N/A)
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
43 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
6.1.1.3. Identification and Authentication
Authentication failure handling
FIA_AFL.1[1]
FIA_AFL.1.1[1]
The TSF shall detect when [selection: [assignment: positive integer number], an administrator
configurable positive integer within [assignment: range of acceptable values]] unsuccessful
authentication attempts occur related to [assignment: list of authentication events].
[assignment: list of authentication events] :
- Authentication for accessing the service mode
- Re-authentication for changing the CE password.
[selection: [assignment: positive integer number], an administrator configurable positive integer
within [assignment: range of acceptable values]]
[assignment: range of acceptable values] : an administrator configurable positive integer within 1-3
FIA_AFL.1.2[1]
When the defined number of unsuccessful authentication attempts has been [selection: met,
surpassed], the TSF shall [assignment: list of actions].
[selection: met, surpassed] :
Met
[assignment: list of actions] :
<Action when it is detected>
- Log off from the authentication status of the service mode if it is, and lock the authentication
function which uses the CE password.
- If it’s not under the authentication status, lock the authentication function which uses the CE
password.
<Operation for recovering the normal condition>
Perform the lock release function of CE authentication by specific operation.
(When time set in the release time setting of operation prohibition for CE authentication passed
from specific operation, the release process is performed.)
Hierarchical to
Dependencies
FIA_AFL.1[2]
:
:
No other components
FIA_UAU.1 (FIA_UAU.2[1])
Authentication failure handling
FIA_AFL.1.1[2]
The TSF shall detect when [selection: [assignment: positive integer number], an administrator
configurable positive integer within [assignment: range of acceptable values]] unsuccessful
authentication attempts occur related to [assignment: list of authentication events].
[assignment: list of authentication events] :
- Authentication for accessing the administrator mode
- Re-authentication for changing the administrator password
[selection: [assignment: positive integer number], an administrator configurable positive integer
within [assignment: range of acceptable values]] :
[assignment: range of acceptable values] : an administrator configurable positive integer within 1-3
FIA_AFL.1.2[2]
When the defined number of unsuccessful authentication attempts has been [selection: met,
surpassed], the TSF shall [assignment: list of actions].
[selection: met, surpassed] :
Met
[assignment: list of actions]
:
<Action when it is detected>
- Log off from the authentication status of the administrator mode if it is, and lock the authentication
function which uses the administrator password.
- If it's not under the authentication status, lock the authentication function which uses the
administrator password.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
44 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
<Operation for recovering the normal condition>
- Perform the boot process of the TOE. (Release process is performed after time set in the release time
setting of operation prohibition for Administrator authentication passed by the boot process.)
Hierarchical to
Dependencies
:
:
No other components
FIA_UAU.1 (FIA_UAU.2[2])
Authentication failure handling
FIA_AFL.1[3]
FIA_AFL.1.1[3]
The TSF shall detect when [selection: [assignment: positive integer number], an administrator
configurable positive integer within [assignment: range of acceptable values]] unsuccessful
authentication attempts occur related to [assignment: list of authentication events].
[assignment: list of authentication events] :
- Authentication for accessing the MIB object through SNMP
[selection: [assignment: positive integer number], an administrator configurable positive integer
within [assignment: range of acceptable values]] :
[assignment: range of acceptable values] : an administrator configurable positive integer within 1-3
FIA_AFL.1.2[3]
When the defined number of unsuccessful authentication attempts has been [selection: met,
surpassed], the TSF shall [assignment: list of actions].
[selection: met, surpassed] :
Met
[assignment: list of actions] :
<Action when it is detected>
Deny the access to the MIB object and lock the authentication function to use SNMP password.
<Operation for recovering the normal condition>
- Perform the delete function of authentication failure frequency offered within the administrator
mode.
Hierarchical to
Dependencies
FIA_AFL.1[4]
:
:
No other components
FIA_UAU.1 (FIA_UAU.2[2])
Authentication failure handling
FIA_AFL.1.1[4]
The TSF shall detect when [selection: [assignment: positive integer number], an administrator
configurable positive integer within [assignment: range of acceptable values]] unsuccessful
authentication attempts occur related to [assignment: list of authentication events].
[assignment: list of authentication events] :
- Authentication for accessing the TOE by user
- Re-authentication when a user changes his/her own user password
[selection: [assignment: positive integer number], an administrator configurable positive integer
within [assignment: range of acceptable values]] :
[assignment: range of acceptable values] : an administrator configurable positive integer within 1-3
FIA_AFL.1.2[4]
When the defined number of unsuccessful authentication attempts has been [selection: met,
surpassed], the TSF shall [assignment: list of actions].
[selection: met, surpassed] :
Met
[assignment: list of actions] :
<Action when it is detected>
- While authentication is performed, log off from the authentication status of the user, and lock the
authentication function for the user.
- Otherwise, lock the authentication function for using the user password.
<Operation for recovering the normal condition>
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
45 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
- Perform the delete function of authentication failure frequency offered within the administrator
mode.
Hierarchical to
Dependencies
:
:
No other components
FIA_UAU.1 (FIA_UAU.1[1])
Authentication failure handling
FIA_AFL.1[5]
FIA_AFL.1.1[5]
The TSF shall detect when [selection: [assignment: positive integer number], an administrator
configurable positive integer within [assignment: range of acceptable values]] unsuccessful
authentication attempts occur related to [assignment: list of authentication events].
[assignment: list of authentication events] :
Authentication for accessing the secure print file
[selection: [assignment: positive integer number], an administrator configurable positive integer
within [assignment: range of acceptable values]] :
[assignment: range of acceptable values] : an administrator configurable positive integer within 1-3
FIA_AFL.1.2[5]
When the defined number of unsuccessful authentication attempts has been [selection: met,
surpassed], the TSF shall [assignment: list of actions].
[selection: met, surpassed] :
Met
[assignment: list of actions] :
<Action when it is detected>
Deny the access to the secure print file and lock the authentication function for the secure print file.
<Operation for recovering the normal condition>
- Perform the delete function of authentication failure frequency offered within the administrator
mode.
Hierarchical to
Dependencies
FIA_AFL.1[6]
:
:
No other components
FIA_UAU.1 (FIA_UAU.2[3])
Authentication failure handling
FIA_AFL.1.1[6]
The TSF shall detect when [selection: [assignment: positive integer number], an administrator
configurable positive integer within [assignment: range of acceptable values]] unsuccessful
authentication attempts occur related to [assignment: list of authentication events].
[assignment: list of authentication events]. :
- Authentication for accessing a public user box
- Re-authentication when a user authorized to access a public user box changes the box password of
the public user box
[selection: [assignment: positive integer number], an administrator configurable positive integer
within [assignment: range of acceptable values]] :
[assignment: range of acceptable values] : an administrator configurable positive integer within 1-3
FIA_AFL.1.2[6]
When the defined number of unsuccessful authentication attempts has been [selection: met,
surpassed], the TSF shall [assignment: list of actions].
[selection: met, surpassed] :
Met
[assignment: list of actions] :
<Action when it is detected>
- While authentication is performed, log off from the authentication status of the user box, and lock
the authentication function for the concerned user box.
- Otherwise, lock the authentication function which uses the box password.
<Operation for recovering the normal condition>
- Perform the delete function of authentication failure frequency offered within the administrator
mode.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
46 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
Hierarchical to
Dependencies
:
:
No other components
FIA_UAU.1 (FIA_UAU.2[4])
Authentication failure handling
FIA_AFL.1[7]
FIA_AFL.1.1[7]
The TSF shall detect when [selection: [assignment: positive integer number], an administrator
configurable positive integer within [assignment: range of acceptable values]] unsuccessful
authentication attempts occur related to [assignment: list of authentication events].
[assignment: list of authentication events] :
- Account authentication: Account authentication when the belonging account of the user who
accesses in the synchronized method is not registered.
- Account authentication: Account authentication of the user who accesses in the method not
synchronized.
[selection: [assignment: positive integer number], an administrator configurable positive integer
within [assignment: range of acceptable values]] :
[assignment: range of acceptable values] : an administrator configurable positive integer within 1-3
FIA_AFL.1.2[7]
When the defined number of unsuccessful authentication attempts has been [selection: met,
surpassed], the TSF shall [assignment: list of actions].
[selection: met, surpassed] :
Met
[assignment: list of actions] :
<Action when it is detected>
Lock the authentication function for the concerned account, and deny the access to the TOE by the
user who permitted the use of the account.
<Operation for recovering the normal condition>
Perform the delete function of authentication failure frequency offered within the administrator
mode.
Hierarchical to
Dependencies
FIA_AFL.1[8]
:
:
No other components
FIA_UAU.1 (FIA_UAU.1[2])
Authentication failure handling
FIA_AFL.1.1[8]
The TSF shall detect when [selection: [assignment: positive integer number], an administrator
configurable positive integer within [assignment: range of acceptable values]] unsuccessful
authentication attempts occur related to [assignment: list of authentication events].
[assignment: list of authentication events] :
- Authentication when it accesses service mode from the panel
- Authentication when it accesses administrator mode from the panel
- User authentication when user accesses TOE from the panel
- Account authentication when user accesses TOE from the panel
- Authentication when it accesses secure print file from the panel
- Authentication when it accesses Public user box from the panel from the panel
[selection: [assignment: positive integer number], an administrator configurable positive integer
within [assignment: range of acceptable values]] :
[assignment: positive integer number] : 1
FIA_AFL.1.2[8]
When the defined number of unsuccessful authentication attempts has been [selection: met,
surpassed], the TSF shall [assignment: list of actions].
[selection: met, surpassed] :
Met
[assignment: list of actions] :
<Action when it is detected>
Deny all access from the panel.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
47 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
<Operation for recovering the normal condition>
Automatically release the lock after 5 seconds.
Hierarchical to
Dependencies
:
:
No other components
FIA_UAU.1(FIA_UAU.2[1], FIA_UAU.2[2], FIA_UAU.1[1], FIA_UAU.2[3],
FIA_UAU.2[4], FIA_UAU.1[2])
Authentication failure handling
FIA_AFL.1[9]
FIA_AFL.1.1[9]
The TSF shall detect when [selection: [assignment: positive integer number], an administrator
configurable positive integer within [assignment: range of acceptable values]] unsuccessful
authentication attempts occur related to [assignment: list of authentication events].
[assignment: list of authentication events] :
- Authentication when accessing by WebDAV
[selection: [assignment: positive integer number], an administrator configurable positive integer
within [assignment: range of acceptable values]] :
[assignment: range of permissible values] : Positive integer values of 1 to 3 that the administrator
can set
FIA_AFL.1.2[9]
When the defined number of unsuccessful authentication attempts has been [selection: met,
surpassed], the TSF shall [assignment: list of actions].
[selection: met, surpassed] :
Met
[assignment: list of actions] :
<Action when it is detected>
Deny access by WebDAV, and lock the authentication function which uses the WebDAV server
password.
<Operation for recovering the normal condition>
Execute the erasure function of the number of times of authentication failure provided in the
administrator mode.
Hierarchical to
Dependencies
:
:
No other components
FIA_UAU.1 (FIA_UAU.2[2])
User attribute definition
FIA_ATD.1
FIA_ATD.1.1
The TSF shall maintain the following list of security attributes belonging to individual users:
[assignment: list of security attributes].
[assignment: list of security attributes] :
- User attributes (User ID)
- User box attributes (User box ID)
- File attributes (Secure print internal control ID)
- Account name (Account ID)
- Administrator Attribute
Hierarchical to
Dependencies
FIA_SOS.1[1]
:
:
No other components
No dependencies
Verification of secrets
FIA_SOS.1.1[1]
The TSF shall provide a mechanism to verify that secrets (Administrator Password, CE Password,
secure print password, user box password, account password, and WebDAV server password) meet
[assignment: a defined quality metric].
[assignment: a defined quality metric] :
- Number of digits: 8- digits
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
48 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
- Character type: possible to choose from 93 or more characters
- Rule :
(1) Do not compose by only one and the same character.
(2) Do not set the same password as the current setting after change.
Hierarchical to
Dependencies
:
:
No other components
No dependencies
Verification of secrets
FIA_SOS.1[2]
FIA_SOS.1.1[2]
The TSF shall provide a mechanism to verify that secrets (SNMP Password) meet [assignment: a
defined quality metric].
[assignment: a defined quality metric] :
- Number of digits: 8- digits or more
- Character type: possible to choose from 90 or more characters
- Rule :
(1) Do not compose by only one and the same character.
(2) Do not set the same password as the current setting after change.
Hierarchical to
Dependencies
:
:
No other components
No dependencies
Verification of secrets
FIA_SOS.1[3]
FIA_SOS.1.1[3]
The TSF shall provide a mechanism to verify that secrets (User Password) meet [assignment: a defined
quality metric].
[assignment: a defined quality metric] :
- Number of digits: 8- digits or more
- Character type: possible to choose from 188 or more characters
- Rule :
(1) Do not compose by only one and the same character.
(2) Do not set the same password as the current setting after change.
Hierarchical to
Dependencies
:
:
No other components
No dependencies
Verification of secrets
FIA_SOS.1[4]
FIA_SOS.1.1[4]
The TSF shall provide a mechanism to verify that secrets (Encryption passphrase) meet [assignment: a
defined quality metric].
[assignment: a defined quality metric] :
- Number of digits: 20- digits
- Character type: possible to choose from 83 or more characters
- Rule :
(1) Do not compose by only one and the same character.
(2) Do not set the same password or passphrase as the current setting after change.
Hierarchical to
Dependencies
FIA_SOS.1[5]
:
:
No other components
No dependencies
Verification of secrets
FIA_SOS.1.1[5]
The TSF shall provide a mechanism to verify that secrets (Session Information) meet [assignment: a
defined quality metric].
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
49 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
[assignment: a defined quality metric]:
10 10 and above
Hierarchical to
Dependencies
:
:
No other components
No dependencies
Verification of secrets
FIA_SOS.2
FIA_SOS.2.1
The TSF shall provide a mechanism to generate secrets (Session information) that meet [assignment: a
defined quality metric.].
[assignment: a defined quality metric.] :
10 10and above
FIA_SOS.2.2
The TSF shall be able to enforce the use of TSF generated secrets for [assignment: list of TSF
functions].
[assignment: list of TSF functions] :
- Administrator authentication (Access through the network)
- User authentication (Access through the network)
- User box authentication (Access through the network)
Hierarchical to
Dependencies
FIA_UAU.1[1]
:
:
No other components
No dependencies
Timing of authentication
FIA_UAU.1.1[1]
The TSF shall allow [assignment: list of TSF mediated actions] on behalf of the user to be performed
before the user is authenticated.
[assignment: list of TSF mediated actions]
Confirm the pause status of the user. (Method of user authentication: Machine authentication only)
FIA_UAU.1.2[1]
The TSF shall require each user (User) to be successfully authenticated before allowing any other
TSF-mediated actions on behalf of that user (User).
Hierarchical to
: No other components
Dependencies
: FIA_UID.1(FIA_UID.2[3])
FIA_UAU.1[2]
Timing of authentication
FIA_UAU.1.1[2]
The TSF shall allow [assignment: list of TSF mediated actions] on behalf of the user to be performed
before the user is authenticated.
[assignment: list of TSF mediated actions]
Confirm the pause status of the account.
FIA_UAU.1.2[1]
The TSF shall require each user (User who is permitted to use account) to be successfully
authenticated before allowing any other TSF-mediated actions on behalf of that user (User who is
permitted to use account).
Hierarchical to
: No other components
Dependencies
: FIA_UID.1(FIA_UID.2[3])
FIA_UAU.2[1]
User authentication before any action
FIA_UAU.2.1[1]
The TSF shall require each user (Service Engineer) to be successfully authenticated before allowing
any other TSF-mediated actions on behalf of that user (Service Engineer).
Hierarchical to
:
FIA_UAU.1
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
50 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
Dependencies
:
FIA_UID.1 (FIA_UID.2[1])
User authentication before any action
FIA_UAU.2[2]
FIA_UAU.2.1[2]
The TSF shall require each user (Administrator (User who is authenticated by Addministrator
password, User who is authenticated by WebDAV server password, User who is authenticated by
SNMP password)) to be successfully authenticated before allowing any other TSF-mediated actions on
behalf of that user (Administrator (User who is authenticated by Addministrator password, User who
is authenticated by WebDAV server password, User who is authenticated by SNMP password)).
Hierarchical to
Dependencies
:
:
FIA_UAU.1
FIA_UID.1 (FIA_UID.2[2])
User authentication before any action
FIA_UAU.2[3]
FIA_UAU.2.1[4]
The TSF shall require each user (User who is permitted to use secure print file) to be successfully
authenticated before allowing any other TSF-mediated actions on behalf of that user (User who is
permitted to use secure print file)
Hierarchical to
Dependencies
:
:
FIA_UAU.1
FIA_UID.1 (FIA_UID.2[4])
User authentication before any action
FIA_UAU.2[4]
FIA_UAU.2.1[5]
The TSF shall require each user (User who is permitted to use the public user box) to be
successfully authenticated before allowing any other TSF-mediated actions on behalf of that user
(User who is permitted to use the public user box)
Hierarchical to
Dependencies
:
:
FIA_UAU.1
FIA_UID.1 (FIA_UID.2[5])
Re-authenticating
FIA_UAU.6
FIA_UAU.6.1
The TSF shall re-authenticate the use under the conditions [assignment: list of conditions under which
re-authentication is required].
[assignment: list of conditions under which re-authentication is required]
- When the service engineer modifies the CE password.
- When the administrator modifies the administrator password.
- When the user changes his/her own user password.
- When a user permitted to use a public user box changes the box password of the public user box.
Hierarchical to
Dependencies
:
:
No other components
No dependencies
Protected authentication feedback
FIA_UAU.7
FIA_UAU.7.1
The TSF shall provide only [assignment: list of feedback] to the user while the authentication is in
progress.
[assignment: list of feedback] :
Display "*" every character data input.
Hierarchical to
Dependencies
:
:
No other components
FIA_UAU.1 (FIA_UAU.2[1], FIA_UAU.2[2], FIA_UAU.1[1], FIA_UAU.2[3],
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
51 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
FIA_UAU.2[4], FIA_UAU.1[2])
User identification before any action
FIA_UID.2[1]
FIA_UID.2.1[1]
The TSF shall require each user (Service Engineer) to identify itself before allowing any other
TSF-mediated actions on behalf of that user (Service Engineer).
Hierarchical to
: FIA_UID.1
Dependencies
: No dependencies
User identification before any action
FIA_UID.2[2]
FIA_UID.2.1[2]
The TSF shall require each user (Administrator) to identify itself before allowing any other
TSF-mediated actions on behalf of that user (Administrator).
Hierarchical to
:
FIA_UID.1
Dependencies
:
No dependencies
User identification before any action
FIA_UID.2[3]
FIA_UID.2.1[3]
The TSF shall require each user (User) to identify itself before allowing any other TSF-mediated
actions on behalf of that user (User).
Hierarchical to
: FIA_UID.1
Dependencies
: No dependencies
User identification before any action
FIA_UID.2[4]
FIA_UID.2.1[4]
The TSF shall require each user (User who is permitted to use secure print file) to be successfully
identified before allowing any other TSF-mediated actions on behalf of that user (User who is
permitted to use secure print file) .
Hierarchical to
Dependencies
:
:
FIA_UID.1
No dependencies
User identification before any action
FIA_UID.2[5]
FIA_UID.2.1[5]
The TSF shall require each user (User who is permitted to use the public user box) to be successfully
identified before allowing any other TSF-mediated actions on behalf of that user (User who is
permitted to use the public user box) .
Hierarchical to
Dependencies
:
:
FIA_UID.1
No dependencies
User identification before any action
FIA_UID.2[6]
FIA_UID.2.1[6]
The TSF shall require each user (User who is permitted to use the account) to be successfully
identified before allowing any other TSF-mediated actions on behalf of that user (User who is
permitted to use the account) .
Hierarchical to
Dependencies
:
:
FIA_UID.1
No dependencies
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
52 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
User identification before any action
FIA_UID.2[7]
FIA_UID.2.1[7]
The TSF shall require each user (External Server) to be successfully identified before allowing any
other TSF-mediated actions on behalf of that user (External Server) .
Hierarchical to
:
FIA_UID.1
Dependencies
:
No dependencies
User-subject binding
FIA_USB.1
FIA_USB.1.1
The TSF shall associate the following user security attributes with subjects acting on the behalf of that
user: [assignment; list of user security attributes].
[assignment; list of user security attributes]:
- User attributes (User ID)
- User box attributes (User box ID)
- File attributes (Secure print internal control ID)
- Account name (Account ID)
- Administrator Attribute
FIA_USB.1.2
The TSF shall enforce the following rules on the initial association of user security attributes with
subjects acting on the behalf of users: [assignment: rules for the initial association of attributes].
[assignment: rules for the initial association of attributes]:
<User box attribute>
The user box ID of the concerned user box associates to the task acting on the behalf of users when
authenticated with the access to the user box.
<Account Name>
- In the method not synchronized with User authentication, the account ID of the concerned account
associates to the task acting on the behalf of users when authenticated with the access to the
account.
- In the method synchronized with User authentication, the account ID that is set to the concerned
user associates to the task acting on the behalf of users when authenticated with the access to the
user.
<File attribute>
The secure print internal control ID of the concerned secure print file associates to the task acting on
the behalf of users when authenticated with the access to the secure print file.
<User attribute>
The user ID of the concerned user associates to the task acting on the behalf of users when
authenticated with the access to the user.
<Administrator attribute>
The Administrator’s attributes associate to the task acting on the behalf of users when authenticated
with the access to the Administrator.
FIA_USB.1.3
The TSF shall enforce the following rules governing changes to the user security attributes associated
with subjects acting on the behalf of users: [assignment: rules for the changing of attributes].
[assignment: rules for the changing of attributes].
None
Hierarchical to
Dependencies
:
:
No other components
FIA_ATD.1 (FIA_ATD.1)
6.1.1.4. Security Management
FMT_MOF.1[1]
Management of security functions behavior
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
53 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
FMT_MOF.1.1[1]
The TSF shall restrict the ability to [selection: determine the behavior of, disable, enable, modify the
behavior of] the functions [assignment: list of functions] to [assignment: the authorized identified roles].
[assignment: list of functions] :
- Enhanced Security Setting
[selection: determine the behavior of, disable, enable, modify the behavior of]
disable
[assignment: the authorized identified roles]
- Administrator
- Service Engineer
Hierarchical to
Dependencies
:
:
:
:
No other components
FMT_SMF.1 (FMT_SMF.1) , FMT_SMR.1 (FMT_SMR.1[1], FMT_SMR.1[2])
Management of security functions behaviour
FMT_MOF.1[2]
FMT_MOF.1.1[2]
The TSF shall restrict the ability to [selection: determine the behavior of, disable, enable, modify the
behaviour of] the functions [assignment: list of functions] to [assignment: the authorized identified
roles].
[assignment: list of functions] :
- User Authentication Function
- S/MIME function
- SNMP password authentication function
- ID & print function
[selection: determine the behavior of, disable, enable, modify the behavior of] :
modify the behavior of
[assignment: the authorized identified roles] :
Administrator
Hierarchical to
Dependencies
:
:
No other components
FMT_SMF.1 (FMT_SMF.1) , FMT_SMR.1 (FMT_SMR.1[2])
Management of security functions behavior
FMT_MOF.1[3]
FMT_MOF.1.1[3]
The TSF shall restrict the ability to [selection: determine the behaviour of, disable, enable, modify the
behaviour of] the functions [assignment: list of functions] to [assignment: the authorized identified
roles].
[assignment: list of functions] :
- Account Authentication Function
- Trusted Channel Function
[selection: determine the behavior of, disable, enable, modify the behaviour of] :
disable, modify the behavior of
[assignment: the authorized identified roles] :
Administrator
Hierarchical to
Dependencies
FMT_MSA.1[1]
:
:
No other components
FMT_SMF.1 (FMT_SMF.1) , FMT_SMR.1 (FMT_SMR.1[2])
Management of security attributes
FMT_MSA.1.1[1]
The TSF shall enforce the [assignment: access control SFP, information flow control SFP] to restrict the
ability to [selection: change_default, query, modify, delete, [assignment: other operations]] the security
attributes [assignment: list of security attributes] to [assignment: the authorized identified roles].
[assignment: list of security attributes] :
User attributes of the user box that is set user's own [user ID].
[selection: change_default, query, modify, delete, [assignment: other operations]] :
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
54 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
Modify (modify to other user's [User ID], [account ID] or [public])
[assignment: the authorized identified roles] :
- User
- Administrator
[assignment: access control SFP, information flow control SFP] :
User box access control
Hierarchical to
Dependencies
:
:
No other components
FDP_ACC.1 or FDP_IFC.1 (FDP_ACC.1[1]) , FMT_SMF.1 (FMT_SMF.1) ,
FMT_SMR.1 (FMT_SMR.1[2], FMT_SMR.1[3])
Management of security attributes
FMT_MSA.1[2]
FMT_MSA.1.1[2]
The TSF shall enforce the [assignment: access control SFP, information flow control SFP] to restrict the
ability to [selection: change_default, query, modify, delete, [assignment: other operations]] the security
attributes [assignment: list of security attributes] to [assignment: the authorized identified roles].
[assignment: list of security attributes] :
User attributes of user box that is set the [public].
[selection: change_default, query, modify, delete, [assignment: other operations]] :
modify (modify to [User ID] or [account ID])
[assignment: the authorized identified roles] :
- User who is permitted to use that public user box
- Administrator
[assignment: access control SFP, information flow control SFP] :
User box access control
Hierarchical to
Dependencies
:
:
No other components
FDP_ACC.1 or FDP_IFC.1 (FDP_ACC.1[1]) , FMT_SMF.1 (FMT_SMF.1) ,
FMT_SMR.1 (FMT_SMR.1[2], FMT_SMR.1[4])
Management of security attributes
FMT_MSA.1[3]
FMT_MSA.1.1[3]
The TSF shall enforce the [assignment: access control SFP, information flow control SFP] to restrict the
ability to [selection: change_default, query, modify, delete, [assignment: other operations]] the security
attributes [assignment: list of security attributes] to [assignment: the authorized identified roles].
[assignment: list of security attributes] :
User attributes of user box that is set the [Account ID].
[selection: change_default, query, modify, delete, [assignment: other operations]] :
modify (modify to [user ID], [public] or other [account ID])
[assignment: the authorized identified roles] :
- User who is permitted to use that account
- Administrator
[assignment: access control SFP, information flow control SFP] :
User box access control
Hierarchical to
Dependencies
FMT_MSA.3[1]
:
:
No other components
FDP_ACC.1 or FDP_IFC.1 (FDP_ACC.1[1]) , FMT_SMF.1 (FMT_SMF.1) ,
FMT_SMR.1 (FMT_SMR.1[2], FMT_SMR.1[6])
Static attribute initialization
FMT_MSA.3.1[1]
The TSF shall enforce the [assignment: access control SFP, information flow control SFP] to provide
[selection, choose one of: restrictive, permissive, [assignment: other property]] default values for
security attributes (User attributes of the user box) that are used to enforce the SFP.
[selection, choose one of: restrictive, permissive, [assignment: other property]] :
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
55 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
[assignment: other property] :
Responded the registered situation of the user box classified into the following cases.
(1) [Public], when an user box is registered by the operation of user or administrator
(2) [User ID] of the user who performed the relevant job, when an user box is registered
automatically according to the operation of stored job specifying unregistered user box.
[assignment: access control SFP, information flow control SFP] :
User box access control
FMT_MSA.3.2[1]
The TSF shall allow the [assignment: the authorized identified roles] to specify alternative initial
values to override the default values when an object or information is created.
[assignment: the authorized identified roles]
Case (1) identified in [assignment: other property] of FMT_MSA.3.1
Case (2) identified in [assignment: other property] of FMT_MSA.3.1
Hierarchical to
Dependencies
:
:
: User, administrator
: None
No other components
FMT_MSA.1 (FMT_MSA.1[1], FMT_MSA.1[2]) , FMT_SMR.1 (FMT_SMR.1[3])
Static attribute initialization
FMT_MSA.3[2]
FMT_MSA.3.1[2]
The TSF shall enforce the [assignment: access control SFP, information flow control SFP] to provide
[selection, choose one of: restrictive, permissive, [assignment: other property]] default values for
security attributes (Secure print internal control ID) that are used to enforce the SFP.
[selection, choose one of: restrictive, permissive, [assignment: other property]] :
[assignment: other property] : Identified uniquely
[assignment: access control SFP, information flow control SFP] :
Secure print file access control
FMT_MSA.3.2[2]
The TSF shall allow the [assignment: the authorized identified roles] to specify alternative initial
values to override the default values when an object or information is created.
[assignment: the authorized identified roles]
None
Hierarchical to
Dependencies
:
:
No other components
FMT_MSA.1 (N/A) , FMT_SMR.1 (N/A)
Static attribute initialization
FMT_MSA.3[3]
FMT_MSA.3.1[3]
The TSF shall enforce the [assignment: access control SFP, information flow control SFP] to provide
[selection, choose one of: restrictive, permissive, [assignment: other property]] default values for
security attributes (User box attributes of user box file) that are used to enforce the SFP.
[selection, choose one of: restrictive, permissive, [assignment: other property]] :
[assignment: other property] : Corresponds with the value of the user box attributes of the user box
that selected as a target to store the user box file concerned.
[assignment: access control SFP, information flow control SFP] :
User box access control
FMT_MSA.3.2[3]
The TSF shall allow the [assignment: the authorized identified roles] to specify alternative initial
values to override the default values when an object or information is created.
[assignment: the authorized identified roles]
None
Hierarchical to
Dependencies
FMT_MSA.3[4]
:
:
No other components
FMT_MSA.1 (N/A) , FMT_SMR.1 (N/A)
Static attribute initialization
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
56 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
FMT_MSA.3.1[4]
The TSF shall enforce the [assignment: access control SFP, information flow control SFP] to provide
[selection: choose one of: restrictive, permissive, [assignment: other property]] default values for the
security attributes (User attributes of ID & print file) that are used to enforce the SFP.
[selection: choose one of: restrictive, permissive, [assignment: other property]] :
[assignment: other property] : Shall be equal to the values of the user attributes of the user who
stores that ID & print file.
[assignment: access control SFP, information flow control SFP] :
ID & print file access control
FMT_MSA.3.2[4]
The TSF shall allow the [assignment: the authorised identified roles] to specify alternative initial
values to override the default values when an object or information is created.
[assignment: the authorized identified roles]
None
:
:
Hierarchical to
Dependencies
No other components
FMT_MSA.1 (N/A) , FMT_SMR.1 (N/A)
Management of TSF data
FMT_MTD.1[1]
FMT_MTD.1.1[1]
(When the [machine authentication] is selected as the User authentication method) The TSF shall
restrict the ability to [selection: change_default, query, modify, delete, clear, [assignment: other
operations]] the [assignment: list of TSF data] to [assignment: the authorized identified roles].
[assignment: list of TSF data] :
User password
[selection: change_default, query, modify, delete, clear, [assignment: other operations]] :
[assignment: other operations] : Registration
[assignment: the authorized identified roles] :
Administrator
Hierarchical to
Dependencies
:
:
No other components
FMT_SMF.1 (FMT_SMF.1) , FMT_SMR.1 (FMT_SMR.1[2])
Management of TSF data
FMT_MTD.1[2]
FMT_MTD.1.1[2]
(When the [machine authentication] is selected as the User authentication method) The TSF shall
restrict the ability to [selection: change_default, query, modify, delete, clear, [assignment: other
operations]] the [assignment: list of TSF data] to [assignment: the authorized identified roles].
[assignment: list of TSF data] :
User's own user password
[selection: change_default, query, modify, delete, clear, [assignment: other operations]] :
modify
[assignment: the authorized identified roles] :
- User
- Administrator
Hierarchical to
Dependencies
FMT_MTD.1[3]
:
:
No other components
FMT_SMF.1 (FMT_SMF.1) , FMT_SMR.1 (FMT_SMR.1[2], FMT_SMR.1[3])
Management of TSF data
FMT_MTD.1.1[3]
The TSF shall restrict the ability to [selection: change_default, query, modify, delete, clear, [assignment:
other operations]] the [assignment: list of TSF data] to [assignment: the authorized identified roles].
[assignment: list of TSF data] :
- User ID
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
57 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
- Account ID
- Account password
- Secure print password
- Panel auto log-off time
- Threshold Number of authentication failure
- External server authentication setting data
- S/MIME certificate 9
- Belonging Account of User
- Release time of operation prohibition for Administrator authentication
- Encryption passphrase
- SNMP password
- TSI receiving setting data
- WebDAV server password
[selection: change_default, query, modify, delete, clear, [assignment: other operations]] :
modify
[assignment: the authorized identified roles] :
Administrator
Hierarchical to
Dependencies
:
:
No other components
FMT_SMF.1 (FMT_SMF.1) , FMT_SMR.1 (FMT_SMR.1[2])
Management of TSF data
FMT_MTD.1[4]
FMT_MTD.1.1[4]
The TSF shall restrict the ability to [selection: change_default, query, modify, delete, clear, [assignment:
other operations]] the [assignment: list of TSF data] to [assignment: the authorized identified roles].
[assignment: list of TSF data] :
User box password of the relevant user box
[selection: change_default, query, modify, delete, clear, [assignment: other operations]] :
modify
[assignment: the authorized identified roles] :
- User who is permitted to use that public user box
- Administrator
Hierarchical to
:
No other components
Dependencies
:
FMT_SMF.1 (FMT_SMF.1) , FMT_SMR.1 (FMT_SMR.1[2], FMT_SMR.1[4])
Management of TSF data
FMT_MTD.1[5]
FMT_MTD.1.1[5]
The TSF shall restrict the ability to [selection: change_default, query, modify, delete, clear, [assignment:
other operations]] the [assignment: list of TSF data] to [assignment: the authorized identified roles].
[assignment: list of TSF data] :
User box password
[selection: change_default, query, modify, delete, clear, [assignment: other operations]] :
[assignment: other operations] : Registration
[assignment: the authorized identified roles] :
- User
- Administrator
Hierarchical to
Dependencies
FMT_MTD.1[6]
:
:
No other components
FMT_SMF.1 (FMT_SMF.1) , FMT_SMR.1 (FMT_SMR.1[2], FMT_SMR.1[3])
Management of TSF data
FMT_MTD.1.1[6]
9
It intends the operation of replacing a settable digital certificate for each user in stead of the modification of the
value itself.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
58 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
The TSF shall restrict the ability to [selection: change_default, query, modify, delete, clear, [assignment:
other operations]] the [assignment: list of TSF data] to [assignment: the authorized identified roles].
[assignment: list of TSF data] :
Administrator password
[selection: change_default, query, modify, delete, clear, [assignment: other operations]] :
modify
[assignment: the authorized identified roles] :
- Administrator
- Service Engineer
:
:
Hierarchical to
Dependencies
No other components
FMT_SMF.1 (FMT_SMF.1) , FMT_SMR.1 (FMT_SMR.1[1], FMT_SMR.1[2])
Management of TSF data
FMT_MTD.1[7]
FMT_MTD.1.1[7]
The TSF shall restrict the ability to [selection: change_default, query, modify, delete, clear, [assignment:
other operations]] the [assignment: list of TSF data] to [assignment: the authorized identified roles].
[assignment: list of TSF data] :
- SNMP password
- User password
- Account password
- User box password
- Secure print password
- WebDAV server password
[selection: change_default, query, modify, delete, clear, [assignment: other operations]] :
query
[assignment: the authorized identified roles] :
Administrator
Hierarchical to
Dependencies
:
:
No other components
FMT_SMF.1 (FMT_SMF.1) , FMT_SMR.1 (FMT_SMR.1[2])
Management of TSF data
FMT_MTD.1[8]
FMT_MTD.1.1[8]
The TSF shall restrict the ability to [selection: change_default, query, modify, delete, clear, [assignment:
other operations]] the [assignment: list of TSF data] to [assignment: the authorized identified roles].
[assignment: list of TSF data] :
Secure print password
[selection: change_default, query, modify, delete, clear, [assignment: other operations]] :
[assignment: other operations] : Registration
[assignment: the authorized identified roles] :
User
Hierarchical to
Dependencies
FMT_MTD.1[9]
:
:
No other components
FMT_SMF.1 (FMT_SMF.1) , FMT_SMR.1 (FMT_SMR.1[3])
Management of TSF data
FMT_MTD.1.1[9]
The TSF shall restrict the ability to [selection: change_default, query, modify, delete, clear, [assignment:
other operations]] the [assignment: list of TSF data] to [assignment: the authorized identified roles].
[assignment: list of TSF data] :
- CE password
- Release time of operation prohibition for CE authentication
[selection: change_default, query, modify, delete, clear, [assignment: other operations]] :
modify
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
59 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
[assignment: the authorized identified roles] :
Service Engineer
:
:
Hierarchical to
Dependencies
No other components
FMT_SMF.1 (FMT_SMF.1) , FMT_SMR.1 (FMT_SMR.1[1])
Management of TSF data
FMT_MTD.1[10]
FMT_MTD.1.1[10]
The TSF shall restrict the ability to [selection: change_default, query, modify, delete, clear, [assignment:
other operations]] the [assignment: list of TSF data] to [assignment: the authorized identified roles].
[assignment: list of TSF data] :
User ID
[selection: change_default, query, modify, delete, clear, [assignment: other operations]] :
[assignment: other operations] : Registration
[assignment: the authorized identified roles] :
Administrator, External server
Hierarchical to
Dependencies
:
:
No other components
FMT_SMF.1 (FMT_SMF.1) , FMT_SMR.1 (FMT_SMR.1[2], FMT_SMR.1[5])
Management of TSF data
FMT_MTD.1[11]
FMT_MTD.1.1[11]
The TSF shall restrict the ability to [selection: change_default, query, modify, delete, clear, [assignment:
other operations]] the [assignment: list of TSF data] to [assignment: the authorized identified roles].
[assignment: list of TSF data] :
- Account ID
- Account password
- S/MIME certificate
- Data of TSI reception setting
- Data of external server authentication setting
[selection: change_default, query, modify, delete, clear, [assignment: other operations]] :
[assignment: other operations] : Registration
[assignment: the authorized identified roles] :
Administrator
Hierarchical to
Dependencies
:
:
No other components
FMT_SMF.1 (FMT_SMF.1) , FMT_SMR.1 (FMT_SMR.1[2])
Management of TSF data
FMT_MTD.1[12]
FMT_MTD.1.1[12]
The TSF shall restrict the ability to [selection: change_default, query, modify, delete, clear, [assignment:
other operations]] the [assignment: list of TSF data] to [assignment: the authorized identified roles].
[assignment: list of TSF data] :
Belonging Account of a user oneself
[selection: change_default, query, modify, delete, clear, [assignment: other operations]] :
[assignment: other operations] : Registration
[assignment: the authorized identified roles]:
Administrator, the user who is permitted to use of the account 10
Hierarchical to
Dependencies
:
:
No other components
FMT_SMF.1 (FMT_SMF.1) , FMT_SMR.1 (FMT_SMR.1[2], FMT_SMR.1[6])
10
A user who isn't related with an account name, and who was informed of the account password for the account
ID from the administrator off-line.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
60 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
Management of TSF data
FMT_MTD.1[13]
FMT_MTD.1.1[13]
The TSF shall restrict the ability to [selection: change_default, query, modify, delete, clear, [assignment:
other operations]] the [assignment: list of TSF data] to [assignment: the authorized identified roles].
[assignment: list of TSF data] :
User ID
Account ID
[selection: change_default, query, modify, delete, clear, [assignment: other operations]] :
[assignment: other operations] : Pause and resume
[assignment: the authorized identified roles]:
Administrator
Hierarchical to
Dependencies
FMT_SMF.1
:
:
No other components
FMT_SMF.1 (FMT_SMF.1) , FMT_SMR.1 (FMT_SMR.1[2], FMT_SMR.1[5])
Specification of Management Functions
FMT_SMF.1.1
The TSF shall be capable of performing the following security management functions: [assignment: list of
security management functions to be provided by the TSF].
[assignment: list of security management functions to be provided by the TSF] :
- Stop Function of Enhanced security function by administrator
- Operation setup function of ID & print function by administrator
- Operation Method Setting Function of User Authentication Function by administrator
- Operation Method Setting Function of Account Authentication Function by administrator
- Operation Setting Function of SNMP password authentication function by administrator
- Setting function of authentication failure frequency threshold by administrator in the authentication
operation prohibition function
- Backup Function by administrator 11
- Restoration Function by administrator 12
- Registration function of account ID by administrator
- Modification function of account ID by administrator
- Registration function of account password by administrator
- Modification function of account password by administrator
- Panel Auto Log-off Time Setting Function by administrator
- Modification function of administrator password by administrator
- Modification function of SNMP password by administrator
- Registration function of user box password by administrator
- Modification function of user box password by administrator
- Modification function of WebDAV server password by administrator
- Registration function of user box by administrator
- Modification function of user attributes of the user box by the administrator (However, only when the
user attribute of previous setting is "user ID")
- Registration function of user ID by administrator
- Pause function of user by administrator
- Resume function of user by administrator
- Pause function of account by administrator
- Resume function of account by administrator
- Registration function of user password when method of user authentication by administrator is
machine authentication
- Modification function of user password when method of user authentication by administrator is
machine authentication
- Registration function of S/MIME certificate by administrator
- Registration modification function of S/MIME certificate by administrator
11
12
A part of the backup function corresponds to the inquiry function of TSF data.
A part of the restoration function corresponds to the modification function of TSF data.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
61 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
- Operation setting function of S/MIME function by administrator
- Operation setting function of Trusted Channel function by administrator
- Registration function of Belonging Account of user by administrator
- Modification function of Belonging Account of user by administrator
- Modification function of Release time of operation prohibition for Administrator authentication by
administrator
- Modification function of Encryption passphrase by administrator
- Modification function of TSI receiving setting data by administrator
- Modification function of CE password by service engineer
- Modification function of administrator password by service engineer
- Stop function of Enhanced Security function by service engineer
- Modification function of Release time of operation prohibition for CE authentication by service
engineer
- Overwrite function for the default value of the user attribute of the user box by the user.
- Modification function of user password when method of user authentication is machine
authentication by user
- Registration function of user box password by user
- Modification function of user attribute of user box by user
- Registration function of Belonging Account of user oneself by user who is permitted the use of the
account
- User box registration function by user
- Automatic Personal user box registration function by user box stored job that specifies unregistered
box by user
- Machine non-registered users' user ID automatic registration function with external server when
user authentication method is external server authentication
- Registration function of secure print password according to secure print file registration by user
- Modification function of user attribute of user box by user who is permitted the use of public user box
- Modification function of user box password of the user box by user who is permitted the use of public
user box
- Modification function of the concerned user box's user attribute by user who is permitted the use of
the group box
Hierarchical to
Dependencies
:
:
FMT_SMR.1[1]
No other components
No dependencies
Security roles
FMT_SMR.1.1[1]
The TSF shall maintain the roles [assignment: the authorised identified roles].
[assignment: the authorised identified roles] :
Service Engineer
FMT_SMR.1.2[1]
The TSF shall be able to associate users with roles.
Hierarchical to
: No other components
Dependencies
: FIA_UID.1 (FIA_UID.2[1])
FMT_SMR.1[2]
Security roles
FMT_SMR.1.1[2]
The TSF shall maintain the roles [assignment: the authorised identified roles].
[assignment: the authorised identified roles] :
Administrator
FMT_SMR.1.2[2]
The TSF shall be able to associate users with roles.
Hierarchical to
: No other components
Dependencies
: FIA_UID.1 (FIA_UID.2[2])
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
62 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
Security roles
FMT_SMR.1[3]
FMT_SMR.1.1[3]
The TSF shall maintain the roles [assignment: the authorised identified roles].
[assignment: the authorised identified roles] :
User
FMT_SMR.1.2[3]
The TSF shall be able to associate users with roles.
Hierarchical to
: No other components
Dependencies
: FIA_UID.1 (FIA_UID.2[3])
Security roles
FMT_SMR.1[4]
FMT_SMR.1.1[4]
The TSF shall maintain the roles [assignment: the authorised identified roles].
[assignment: the authorised identified roles] :
User who is authorized to use that public user box
FMT_SMR.1.2[4]
The TSF shall be able to associate users with roles.
Hierarchical to
: No other components
Dependencies
: FIA_UID.1 (FIA_UID.2[5])
Security roles
FMT_SMR.1[5]
FMT_SMR.1.1[5]
The TSF shall maintain the roles [assignment: the authorised identified roles].
[assignment: the authorised identified roles] :
External server
FMT_SMR.1.2[5]
The TSF shall be able to associate users with roles.
Hierarchical to
: No other components
Dependencies
: FIA_UID.1 (FIA_UID.2[7])
Security roles
FMT_SMR.1[6]
FMT_SMR.1.1[6]
The TSF shall maintain the roles [assignment: the authorised identified roles].
[assignment: the authorised identified roles] :
The user who is permitted to use of the account
FMT_SMR.1.2[6]
The TSF shall be able to associate users with roles.
Hierarchical to
: No other components
Dependencies
: FIA_UID.1 (FIA_UID.2[6])
6.1.1.5. TOE Access
TSF-initiated termination
FTA_SSL.3
FTA_SSL.3.1
The TSF shall terminate an interactive session after a [assignment: time interval of user inactivity].
[assignment: time interval of user inactivity] :
Time decided from the final operation depending on the panel auto logoff time (1-9 minute/s) while a
administrator or a user is operating on the panel
Hierarchical to
:
No other components
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
63 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
Dependencies
:
No dependencies
6.1.1.6. Trusted Pass/Channel
Inter-TSF trusted channel
FTP_ITC.1
FTP_ITC.1.1
The TSF shall provide a communication channel between itself and a other trusted IT product that is
logically distinct from other communication channels and provides assured identification of its end
points and protection of the channel data from modification or disclosure.
FTP_ITC.1.2
The TSF shall permit [selection : the TSF, the other trusted IT product] to initiate communication via the
trusted channel.
[selection : the TSF, the other trusted IT product]
The other trusted IT product
FTP_ITC.1.3
The TSF shall initiate communication via the trusted channel for [assignment : list of functions for which
a trusted channel is required].
[assignment : list of functions for which a trusted channel is required]
- Download of the user box file.
- Upload of the image file that will be stored as a user box file.
- Upload of the image file that will be the secure print file.
- Upload of the image file that will be the ID & Print file.
Hierarchical to
Dependencies
:
:
No other components
No dependencies
6.1.1.7. Extension: Remaining Information Protection of All Data
FAD_RIP.1
Remaining Information Protection of All Data after the explicit deletion
operation
FAD_RIP.1.1
TSF shall ensure that the content of the information allocated to source before shall not be available
after the explicit deletion operation against the object and TSF data.: [assignment: list of object and list
of TSF data].
[assignment : List of object and list of TSF data] :
<Objects>
- User Box file
- Secure print file
- ID & print file
- On-memory image file
- Stored image file
- HDD remaining image file
- Image-related file
- Transmission address data file
<TSF data>
- Encryption passphrase
- Administrator password
- SNMP password
- WebDAV server password
- User ID
- User password
- User Box password
- Secure print password
- Account ID
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
64 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
- Account password
- S/MIME certificate
- SSL certificate
Hierarchical to
Dependencies
:
:
No other components
No dependencies
6.1.1.8. Extension: Capability of Using IT Environment Entity
Capability of using security service of IT environment entity
FIT_CAP.1[1]
FIT_CAP.1.1[1]
TSF shall provide the necessary capability to use the service for [assignment: security service provided
by IT environment entity]. : [assignment: necessary capability list for the operation of security service]
[assignment: security service provided by IT environment entity] :
User authentication function of user information management server using Active Directory
[assignment: necessary capability list for the operation of security service] :
- Inquiry function of authentication information for the identification and authentication target user
- Acquirement function of authentication information for the identification and authentication target
user
Hierarchical to
Dependencies
:
:
No other components
No dependencies
Capability of using security service of IT environment entity
FIT_CAP.1[2]
FIT_CAP.1.1[2]
TSF shall provide the necessary capability to use the service for [assignment: security service provided
by IT environment entity]. : [assignment: necessary capability list for the operation of security service]
[assignment: security service provided by IT environment entity] :
HDD encryption function achieved by ASIC
[assignment: necessary capability list for the operation of security service] :
Support function of the image files processing by HDD encryption function
Hierarchical to
Dependencies
:
:
No other components
No dependencies
6.1.2. TOE Security Assurance Requirements
The TOE is a commercial office product that is used in a general office environment, and
therefore a TOE security assurance requirement that is required for EAL3 conformance, which
is a sufficient level as an assurance for commercial office products, is applied. The following table
summarizes the applied TOE security assurance requirements.
Table 8 TOE Security Assurance Requirements
TOE Security Assurance Requirements
Class ADV:
Development
Class AGD:
Component
Security architecture description
ADV_ARC.1
Functional specification with complete
ADV_FSP.3
summary
Architectural design
ADV_TDS.2
Operational user guidance
AGD_OPE.1
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
65 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
TOE Security Assurance Requirements
Guidance documents
Component
Preparative procedures
AGD_PRE.1
Authorisation controls
ALC_CMC.3
Implementation
representation
CM
ALC_CMS.3
coverage
Class ALC:
Life Cycle Support
Class ASE:
Security Target Evaluation
Class ATE:
Tests
Class AVA:
Delivery procedures
ALC_DEL1
Identification of security measures
ALC_DVS.1
Developer defined life-cycle model
ALC_LCD.1
Conformance claims
ASE_CCL.1
Extended components definition
ASE_ECD.1
ST introduction
ASE_INT.1
Security objectives
ASE_OBJ.2
Derived security requirements
ASE_REQ.2
Security problem definition
ASE_SPD.1
TOE summary specification
ASE_TSS.1
Analysis of coverage
ATE_COV.2
Testing: basic design
ATE_DPT.1
Functional testing
ATE_FUN.1
Independent testing - sample
ATE_IND.2
Vulnerability analysis
AVA_VLA.1
Vulnerability Assessment
6.2. IT Security Requirements Rationale
6.2.1. Rationale for IT Security Functional Requirements
6.2.1.1. Necessity
The correspondence between the security objectives and the IT security functional
requirements are shown in the following table. It shows that the IT security functional
requirements correspond to at least one security objective.
Table 9 Conformity of IT Security Functional Requirements to Security Objectives
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
66 / 111
* set.service
X
X
* set.admin
X
O.CRYPTO-CAPABILITY
X
X
O.AUTH-CAPABILITY
X
X
O.FAX-CONTROL
X
X
O.CRYPTO-MAIL
X
X
O.TRUSTED-PASS
O.CONFIG
X
X
O.CRYPTO-KEY
O.SECURE-PRINT
X
X
O.OVERWRITE-ALL
O.GROUP-BOX
set.admin
set.service
FCS_CKM.1
FCS_COP.1
O.PUBLIC-BOX
Functional
Requirements
O.PRIVATE-BOX
Security
O.REGISTERED-USER
Security Objectives
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
* set.service
* set.admin
X
O.CRYPTO-CAPABILITY
X
O.AUTH-CAPABILITY
X
O.FAX-CONTROL
X
O.CRYPTO-MAIL
X
X
O.TRUSTED-PASS
X
O.CRYPTO-KEY
X
O.OVERWRITE-ALL
X
O.CONFIG
X
O.SECURE-PRINT
O.GROUP-BOX
FDP_ACC.1[1]
FDP_ACC.1[2]
FDP_ACC.1[3]
FDP_ACC.1[4]
FDP_ACF.1[1]
FDP_ACF.1[2]
FDP_ACF.1[3]
FDP_ACF.1[4]
FDP_IFC.1
FDP_IFF.1
FIA_AFL.1[1]
FIA_AFL.1[2]
FIA_AFL.1[3]
FIA_AFL.1[4]
FIA_AFL.1[5]
FIA_AFL.1[6]
FIA_AFL.1[7]
FIA_AFL.1[8]
FIA_AFL.1[9]
FIA_ATD.1
FIA_SOS.1[1]
FIA_SOS.1[2]
FIA_SOS.1[3]
FIA_SOS.1[4]
FIA_SOS.1[5]
FIA_SOS.2
FIA_UAU.2[1]
FIA_UAU.2[2]
FIA_UAU.1[1]
FIA_UAU.2[3]
FIA_UAU.2[4]
FIA_UAU.1[2]
FIA_UAU.6
FIA_UAU.7
FIA_UID.2[1]
FIA_UID.2[2]
FIA_UID.2[3]
FIA_UID.2[4]
FIA_UID.2[5]
FIA_UID.2[6]
FIA_UID.2[7]
FIA_USB.1
FMT_MOF.1[1]
FMT_MOF.1[2]
FMT_MOF.1[3]
FMT_MSA.1[1]
FMT_MSA.1[2]
FMT_MSA.1[3]
FMT_MSA.3[1]
O.PUBLIC-BOX
Functional
Requirements
O.PRIVATE-BOX
Security
O.REGISTERED-USER
Security Objectives
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
67 / 111
X
X
X
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
* set.admin
* set.service
O.CRYPTO-CAPABILITY
O.AUTH-CAPABILITY
O.FAX-CONTROL
O.CRYPTO-MAIL
O.TRUSTED-PASS
O.CRYPTO-KEY
X
O.OVERWRITE-ALL
X
O.CONFIG
X
O.SECURE-PRINT
O.GROUP-BOX
FMT_MSA.3[2]
FMT_MSA.3[3]
FMT_MSA.3[4]
FMT_MTD.1[1]
FMT_MTD.1[2]
FMT_MTD.1[3]
FMT_MTD.1[4]
FMT_MTD.1[5]
FMT_MTD.1[6]
FMT_MTD.1[7]
FMT_MTD.1[8]
FMT_MTD.1[9]
FMT_MTD.1[10]
FMT_MTD.1[11]
FMT_MTD.1[12]
FMT_MTD.1[13]
FMT_SMF.1
FMT_SMR.1[1]
FMT_SMR.1[2]
FMT_SMR.1[3]
FMT_SMR.1[4]
FMT_SMR.1[5]
FMT_SMR.1[6]
FTA_SSL.3
FTP_ITC.1
FAD_RIP.1
FIT_CAP.1[1]
FIT_CAP.1[2]
O.PUBLIC-BOX
Functional
Requirements
O.PRIVATE-BOX
Security
O.REGISTERED-USER
Security Objectives
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Note) set.admin and set.service indicates the set of the requirements. And the security
objectives assumed to have the correspondence and presented by "X" also correspond to a
series of requirement set associated by * set.admin and * set.service shown in column.
6.2.1.2. Sufficiency
The IT security functional requirements for the security objectives are described as follows.
z O.REGISTERED-USER (Usage of a permitted user)
This security objective limits the utilization of MFP installing TOE to only the user who
succeeded in identification and authentication, and needs various requirements regarding
user identification and authentication.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
68 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
<Necessary requirement for identification and authentication of the user>
It identifies and authenticates that the user who accesses is a permitted user by FIA_UID.2[3]
and FIA_UAU.1[1].
FIA_UAU.7 returns "*" for each entered character as feedback protected by the panel and
supports the authentication.
In the case of the failure authentication from the panel, FIA_AFL.1 [8] refuses all input
acceptances from the panel for 5 seconds in every failure. When the authentication failure
reaches 1-3 times, FIA_AFL.1 [4] locks the authentication function for that user from then on.
This lock status is released by the administrator's release operation.
FMT_MOF.1[2] permits only the administrator the selection of the user authentication
methods which are "Machine authentication" and "External server authentication".
FMT_MTD.1[3] permits only the administrator the setting (modification) of the threshold of
the Authentication failure frequency which is the trial frequency of the failure authentication
in the user authentication.
FIA_SOS.1[5] secures the quality verification of the session information used in the user
authentication via the network, and FIA_SOS.2 secures the quality of the session information
which is generated and used.
<Necessary requirements for managing session of user who is identified and authenticated>
The duration of session of the user who is identified and authenticated contributes to reduce
the chance of attacking associated with unnecessary session connection, by ending the session
after the panel automatic logoff time elapses with FTA_SSL.3. when it logs in from the panel.
The change in the panel auto logoff time is limited to the administrator by FMT_MTD.1[3].
<Necessary requirement for managing the identification and authentication information of the
user>
When "the machine authentication" is chosen in a method of the user authentication by
FMT_MTD.1[1], the initial registration of a user password in the user's registration is
permitted only by the administrator.
When "the machine authentication" has been selected in the method of the user authentication,
the registration of the user ID, pause and resumption of use in the user registration is
permitted to the administrator by FMT_MTD.1[10] and FMT_MTD.1[13]. When the "external
server authentication" (has been selected in the user authentication method, the user who is
authenticated the identification is permitted from an external server and registered
automatically by this requirement. (This corresponds to the user ID registration of the
"external server".) At this registration, the external server accessing TOE is identified the
external server registered by FIA_UID.2[7]. This management behavior is maintained as the
role of the external server by FMT_SMR.1 [5]. In addition, the registration function of user ID
is specified for the administration function by FMT_SMF.1.
The registration and change operation of an external server setting is limited to only the
administrator by FMT_MTD.1[3] and FMT_MTD.1[11].
The quality of the user password is verified by FIA_SOS.1[3]. When "machine authentication"
is selected in the method of the user authentication, a change of the user password is limited to
the user itself and the administrator by FMT_MTD.1[2]. In addition, when a user changes
his/her own user password, the user is re-authenticated by FIA_UAU.6.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
69 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
<Necessary requirement to keep the administrator secure>
Æ refer to set.admin
<Necessary requirement to keep the service engineer secure>
Æ refer to set.service
<Role and management function for each management>
The role to do these managements is maintained as a administrator by FMT_SMR.1[2] and a
user by FMT_SMR.1[3]. Moreover, these management functions are specified by FMT_SMF.1.
This security objective is satisfied by the completion of these multiple functional requirements.
z O.PRIVATE-BOX (personal user box access control)
This security objective limits access to the personal user box and the user box file in the
personal user box to only the user who owns that user box, and needs various requirements
that relate to the access control.
<User box access control (a personal user box)>
After the user has been identified and authorized, the user ID is associated with the task of
acting a use by FIA_ATD.1 and FIA_USB.1. By FDP_ACC.1[1] and FDP_ACF.1[1], the task of
acting the user has a user ID, and is permitted to display the list of the user box with a
corresponding user attribute. In addition, after the user box has been selected, when the user
box ID is associated with the task of acting a use by FIA_ATD.1 and FIA_USB.1, the
operation such as a print, a download, transmissions, a movement, and a copy is permitted to
the user box file that has a corresponding object attribute to user ID and user box ID of the
subject attribute.
<Management of a personal user box>
FMT_MSA.1[1] permits to the user and the administrator the change operation of the user
attribute of the user box where the user ID is set.
As for the registration of the user box, public is appointed to the user attribute of the user box
by FMT_MSA.3[1], and it is permitted only to the user and administrator to give the initial
value to change the public attribute. In addition, when the job to store the non-registered user
box into the user box appointed is executed due to the same requirement, a user ID of the user
who executes a job concerned is appointed automatically.
As for the box attribute of the user box file, the value consistent with the box attribute of the
user box which was selected as the file saved is set up by FMT_MSA.3[3].
<Necessary requirement to keep the administrator secure>
Æ refer to set.admin
<Necessary requirement to keep the service engineer secure>
Æ refer to set.service
<Role and controlling function for each management>
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
70 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
As the role of doing these managements, FMT_SMR.1[2] maintains an administrator and
FMT_SMR.1[3] maintains a user permitted the use of the user box. FMT_SMF.1 specifies
these management functions.
This security objective is satisfied by the completion of these multiple functional
requirements.
z O.PUBLIC-BOX (a public user box access control)
This security objective permits the inspection of the public user box to all users, and limits
the setting of the public user box and the operation of the user box file in the public user box
only to the user who permitted the utilization of that public user box. And it needs the various
requirements regarding access control.
<User box access control (a public user box)>
After the user has been identified and authorized, the user ID is associated with the task of
acting a use by FIA_ATD.1 and FIA_USB.1. FDP_ACC.1[1] and FDP_ACF.1[1] permits the
list display operation to the user box where public is set on the user attributes to the task of
acting the user who has user ID.
It is required to be a user who is permitted the use of the user box to operate the user box file
in the public user box. FIA_UID.2[5] and FIA_UAU.2[4] identifies and authenticates that it is
a user who is permitted the use of the user box.
FIA_UAU.7 returns "*" for each entered character as feedback protected by the panel and
supports the authentication.
In the case of the failure authentication from the panel, FIA_AFL.1 [8] refuses all input
acceptances from the panel for 5 seconds in every failure. When the authentication failure
reaches 1-3 times, FIA_AFL.1 [6] locks the authentication function for that user from then on.
This lock status is released by the administrator's release operation.
FMT_MTD.1[3] permits only to the administrator the setup of the threshold of the
unauthorized access detection value that is the trial frequency of the failure authentication in
the authentication of the user who is permitted the use of the user box.
When FIA_ATD.1 and FIA_USB.1 relates a user box ID to the task of acting use,
FDP_ACC.1[1] and FDP_ACF.1[1] permit the user box file that has a corresponding object
attribute to the user box ID of the subject attribute and is set public to the user attribute of
user box, the operation such as a print, a download, transmissions, a movement, and a copy.
FIA_SOS.1[5] secures the quality verification of the session information used in the user box
authentication via the network, and FIA_SOS.2 secures the quality of the session information
which is generated and used.
<Management of a public user box>
FMT_MSA.1[2] permits the user who is permitted the use of the user box to operate the
change of the user attribute of use box which "Public" is set. FMT_MTD.1[4] permits the
change in the user box password only to the administrator and the user who is permitted to
the use of the user box. FIA_SOS.1[1] verifies the quality of the user box password. If a user
permitted to use a public user box changes the user box password of the public user box,
FIA_UAU.6 re-authenticates the user.
As for the user box registration, FMT_MSA.3[1] specifies the public to the user attribute of
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
71 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
the user box, and permits only the user and administrator to give the initial value to change
the user attribute. FMT_MTD.1[5] permits the registration of the user box password only to
the user or the administrator. For the user box attribute of the user box file, the user box
attribute value of the selected user box as storage is set by FMT_MSA.3[3].
<Necessary requirement to keep the administrator secure>
Æ refer to set.admin
<Necessary requirement to keep the service engineer secure>
Æ refer to set.service
<Role and controlling function for each management>
As the role of doing these managements, FMT_SMR.1[2] maintains an administrator and
FMT_SMR.1[4] maintains a user permitted the use of the user box. FMT_SMF.1 specifies
these management functions.
This security objective is satisfied by the completion of these multiple functional
requirements.
z O.GROUP-BOX (Group user box access control)
This security objective permits the browser of the group box only to the user who is permitted
the use of the account, and limits the operation of the user function of the box file in the group
user box, set of the group box which is not a pause status of use only to the user who is
permitted the use of the group user box, and requires various requirements that relate to the
access control.
<User box access control (a group user box)>
After the user has been identified and authorized, the user ID is associated with the task of
acting a use by FIA_ATD.1 and FIA_USB.1 And after the account has been authorized, the
account ID is associated with the task of acting a use by FIA_ATD.1 and FIA_USB.1
FDP_ACC.1[1] and FDP_ACF.1[1] permits a task to act for the user to operate the list to the
user box (group user box) where the user attribute corresponded with the Account Name
(account ID) in the security attribute of the subject is set.
It is required to be a user who is permitted the use of the group user box to operate the user
box file in the group user box which is not a pause status of use. When the Account
authentication method is "the method not synchronized", FIA_UID.2[6] and FIA_UAU.1[2]
identifies and authenticates that it is a user who is permitted the use of the group user box.
When the account authentication method is "synchronized method" and the Account that user
belongs to is not registered, FIA_UID.2[6] and FIA_UAU.1[2] identifies and authenticates
that it is a user who is permitted the use of the account.
FIA_UAU.7 returns "*" for each entered character as feedback protected by the panel and
supports the authentication.
In the case of the failure authentication from the panel, FIA_AFL.1[8] refuses all input
acceptances from the panel for 5 seconds in every failure. When the authentication failure
reaches 1-3 times, FIA_AFL.1[7]
locks the authentication function for that account from
then on. This lock status is released by the administrator's release operation.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
72 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
FMT_MTD.1[3] permits only the administrator the setup of the threshold of the unauthorized
access detection value that is the trial frequency of the failure authentication in the
authentication of the user who is permitted the use of the group user box.
When FIA_ATD.1 and FIA_USB.1 relates to the user box ID under the task to act for user,
FDP_ACC.1[1] and FDP_ACF.1[1] permits the user box file that has a corresponding object
attribute to the account ID and the user box ID of the subject attribute the operation such as
print, download, transmissions, movement and copy.
<Necessary requirement to manage the group box>
FMT_MAS.1[3] permits the modification operation of the user attribute of the user box that is
set "account ID" to the user who is permitted the access to the group user box.
For the user box attribute of the user box file, the user box attribute value of the selected user
box as storage is set by FMT_MSA.3[3].
<Necessary requirement to manage the subject attribute related with the group user box>
FMT_MTD.1[11] and FMT_MTD.1[13]restricts the registration of the account ID and account
password, pause and resumption of use only to the administrator. Also, FMT_MTD.1[3]
restricts the modification of the account ID and account password only to the administrator.
FMT_MTD.1[12] restricts the registration of the belonging account assigned to the user, to
the administrator and to the user who is permitted the use of the account.
FIA_SOS.1[1] verifies the quality of the account password .
<Management of the account authentication method>
FMT_MOF.1[3] restricts the behavior management of the account authentication function
and the stop operation management to the administrator.
<Necessary requirement to keep the administrator secure>
Æ refer to set.admin
<Necessary requirement to keep the service engineer secure>
Æ refer to set.service
<Role and controlling function for each management>
As the role of doing these managements, FMT_SMR.1[2] maintains an administrator and
FMT_SMR.1[6] maintains a user permitted the use of the group user box. FMT_SMF.1
specifies these management functions.
This security objective is satisfied by the completion of these multiple functional
requirements.
z O.SECURE-PRINT (Access control of secure print file and ID & print file)
These security objectives explain the policy for the secure print file.
First, for secure print file, this security objective limits the print of the secure print file only
for the user, who is permitted the use of the secure print file, and requires various
requirements that relate to the access control.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
73 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
<Secure print file access control>
After the user has been identified and authorized, the user ID is associated with the task of
acting a use by FIA_ATD.1 and FIA_USB.1. FDP_ACC.1[2] and FDP_ACF.1[2] permits the
list display operation of every secure print user box to the task of acting the user who has
user ID.
As it must be a user who is permitted the use of the secure print file to print it, FIA_UID.2[4]
and FIA_UAU.2[3] identifies and authenticates that it is a user who is permitted the use of
the secure print file.
FIA_UAU.7 returns "*" for each entered character as feedback protected by the panel and
supports the authentication.
FIA_AFL.1 [8] refuses all input acceptances from the panel for 5 seconds in every failure.
When the authentication failure reaches 1-3 times, FIA_AFL.1 [5] locks the authentication
function for to the concerned secure print file. This lock status is released by the
administrator's release operation.
FMT_MTD.1[3] permits only to the administrator the setup of the threshold of the
authentication failure frequency that is the trial frequency of the failure authentication in
the authentication of the user who is permitted the use of the secure print file.
When FIA_ATD.1 and FIA_USB.1 relate the secure print internal control ID to the task of
acting use, FDP_ACC.1[2] and FDP_ACF.1[2] permit the print operation to the secure print
file that has a corresponding object attribute to the secure print internal control ID of the
subject attribute.
As for secure print internal control ID, FMT_MSA.3[2] gives the value uniquely identified
when the secure print file is stored.
<Secure print password>
FMT_MTD.1[8] permits only to the user the registration of the secure print password used
for the authentication. FIA_SOS.1[1] verifies the quality of the secure print password.
Next, for ID & print file, this security objective limits the print of the ID & print file only for
the user who stored that file, so that various requirements regarding access control are
necessary.
<ID & print file access control>
FDP_ACC.1[4] and FDP_ACF.1[4] permit the task substituting for a user with a user ID to
list and print the ID & print file with the user attribute consistent with the user ID.
For the user attribute set in the ID & print file, the user ID of the user who stores the file
when the file is stored is set by FMT_MSA.3[4].
<Operation management of the ID & print function>
Management of this operation mode is limited only to the administrator by FMT_MOF.1[2].
<Necessary requirement to keep the administrator secure>
Æ refer to set.admin
<Necessary requirement to keep the service engineer secure>
Æ refer to set.service
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
74 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
<Role and controlling function for each management>
As the role of doing these managements, FMT_SMR.1[2] maintains an administrator and
FMT_SMR.1[3] maintains a user. Moreover, FMT_SMF.1 specifies these management
functions.
This security objective is satisfied by the completion of these multiple functional
requirements.
z O.CONFIG (Access limitation to an management function)
This security objective limits the setting related to the SMTP server, the setting related to the
DNS server, the setting related to the Enhanced Security function, the backup function, and
the restorations function to the administrator, and needs various requirements to limit the
access to a series of setting function and the management function.
<Management of network setting>
When the administrator attribute is associated with the task of substituting the use,
FDP_ACC.1[3] and FDP_ACF.1[3] permits the task of substituting the user to operate the
SMTP server group object, DNS server group object, settings for the MFP address group
object, PC-FAX reception setting object, and transmission address data object.
<Operation limitation of Backup and restoration function>
When the administrator attribute is associated with the task of acting the use by FIA_ATD.1
and FIA_USB.1, the task of acting the user is permitted the back-up operation of;
- the user box files by FDP_ACC.1[1] and FDP_ACF.1[1].
- the secure print files by FDP_ACC.1[2] and FDP_ACF.1[2].
- the ID & print files by FDP_ACC.1[4] and FDP_ACF.1[4].
In addition, the restoration operation is permitted for
- SMTP server group object, DNS server group object, MFP address group object, PC-FAX
operation setting object, and transmission address data object by FDP_ACC.1[3] and
FDP_ACF.1[3].
Moreover, the restoration operation (modification operation) is permitted only to the
administrator for the following data:
- the enhanced security setting data by FMT_MOF.1[1]
- the operation setting data of user authentication function, encryption strength setting data
for S/MIME function and setting data of SNMP password authentication function by
FMT_MOF.1[2].
- the Trusted Channel setting data, encryption passphrase and account authentication
function operation setting data by FMT_MOF.1[3].
- the user attribute of the user box by FMT_MSA.1[1], FMT_MSA.1[2] and FMT_MSA.1[3].
- the user password by FMT_MTD.1[2].
- the user ID, the SNMP password, the panel auto logoff time, the authentication failure
frequency, the secure print password, the external authentication setting data, the account
ID, the account password, the S/MIME certificate, the belonging account of user, release
time of operation prohibition for administrator authentication, TSI receiving setting, and
WebDAV server password by FMT_MTD.1[3].
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
75 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
- the user box password by FMT_MTD.1[4].
FMT_MTD.1[7] permits only to the administrator the backup operation (inquiry operation)
of the SNMP password, the user password, the user box password, and the secure print
password, the account password, and WebDAV server password.
<Operational limitation of Enhanced Security function>
FMT_MOF.1[1] permits only the administrator and service engineer to disable the setting
for the enhanced security function.
<Management of encryption passphrase >
FMT_MTD.1[3] permits only administrator the modification operation to the encryption
passphrase. FIA_SOS.1[4] verifies the quality of the encryption passphrase.
<Necessary requirement for accessing MIB object>
The SMTP server group object, the DNS server group object and the MFP address group
object exists as an MIB object as well, so that the restriction is necessary even in the access
from the SNMP.
FIA_UID.2[2] and FIA_UAU.2[2] identifies and authenticates that the user who accesses
the MIB object is an administrator.
FIA_AFL.1[3] locks the authentication function to access the MIB object when the failure
authentication reaches 1-3 times. This lock is released by the lock release operation by the
administrator.
FMT_MTD.1[3] restricts the threshold setting of the unauthorized access detection value
that is the trial frequency of the failure authentication in the administrator authentication
using the SNMP password only to the administrator
FMT_MTD.1[3] restricts the change in the SNMP password to the administrator.
FIA_SOS.1[2] verifies the quality of the SNMP password.
FMT_MOF.1[2] restricts the method of the SNMP password authentication function only to
the administrator.
<Requirements for the counter management function (access by WebDAV)>
FIA_UID.2[2] and FIA_UAU.2[2] identify and authenticate that the user accessing by
WebDAV is an administrator.
FMT_MTD.1[7] permits the identified and authenticated administrator to perform inquiry
of user passwords and account passwords.
FIA_AFL.1[9] locks the administrator authentication function which uses the WebDAV
server password when authentication has failed once, twice, or three times. This lock state
is released by the administrator’s unlock operation.
When an administrator is authenticated by the WebDAV server password, FMT_MTD.1[3]
restricts the setup of the maximum number of times of unsuccessful authentication only to
the administrator.
FMT_MTD.1[3] restricts the change of the WebDAV server password only to the
administrator. FIA_SOS.1[1] verifies the quality of the WebDAV server password.
< Operational Limit of Trusted Channel function setting data>
The behavior and the stop setting of Trusted Channel function are permitted only to the
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
76 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
administrator by FMT_MOF.1[3].
<Operational Limit for S/MIME function>
The registration of the S/MIME certificate is permitted only to the administrator by
FMT_MTD.1[11]. The modification of the S/MIME certificate registered is permitted only to
the administrator by FMT_MTD.1[3]. In addition, the setup of transmission address data is
permitted only to the administrator by FDP_ACC.1[3] and FDP_ACF.1[3].
The behavior of the S/MIME function is permitted only to the administrator by the
FMT_MOF.1[2].
<Operational Limit for FAX function>
The registration of TSI reception setting, which is the box to be stored a received data in TSI
reception, is permitted only to the administrator by FMT_MTD.1[11]. The modification of
TSI reception setting registered is permitted only to the administrator by FMT_MTD.1[3].
In addition, PC-FAX reception setting, which is the setting of the area to store a received
data by PC-FAX reception, is permitted only to the administrator by FDP_ACC.1[3] and
FDP_ACF.1[3].
<Necessary requirements to keep the administrator secure>
Æ refer to set.admin
<Necessary requirements to keep the service engineer secure>
Æ refer to set.service
<Role and controlling function for each management>
As the role of doing these managements, FMT_SMR.1[1] maintains a service engineer and
FMT_SMR.1[2] maintains an administrator. Moreover, FMT_SMF.1 specifies these
management functions.
This security objective is satisfied by the completion of these multiple functional
requirements.
z O.OVERWRITE-ALL (Complete overwrite deletion)
This security objective regulates that it deletes all data areas of HDD and initializes the
concealed information of NVRAM that is set by the user, and requires various requirements
that relate to the deletion.
FAD_RIP.1 guarantees that these objective information not to be able to use the content of
any previous information by the deletion operation.
Therefore, this security objective is satisfied.
z O.CRYPT-KEY (Encryption key generation)
This security objective regulates that the encryption key necessary to encrypt all the data
written in HDD by ASIC is generated, and needs various requirements that relate to the
encryption key generation.
Using Konica Minolta HDD encryption key generation algorism according to the Konica
Minolta encryption specification standard, FCS_CKM.1 generates an encryption key 128 bits
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
77 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
long.
This security objective is satisfied by the completion of this function requirement.
z O.TRUSTED-PASS (Usage of Trusted Channel)
This security objective generates the Trusted Channel in the transmission and reception such
as a user box file, a secure print file, and an ID & print file, and the requirement that relates
with the Trusted Channel is necessary. FTP_ITC.1 generates the Trusted Channel according
to the requirement from the other Trusted IT product, and it is applied to the transmission
and reception, such as the user box file, the secure print file, and the ID & print file.
This security objective is satisfied by the completion of this function requirement,
z O.CRYPTO-MAIL (Usage of Encryption mail)
This security objective regulates the encryption of a user box file when transmitting the user
box file by e-mail, and various requirements related to the encryption are necessary.
FCS_CKM.1 generates the encryption key (128, 168, 192 or 256 bits) by using Pseudorandom
number Generation Algorithm according to FIPS 186-2.
FCS_COP.1 encrypts the user box file by using AES (encryption key: 128, 192 or 256 bits) of
FIPS PUB 197 (it becomes a transmission data of S/MIME). Also, the same requirement
encrypts the user box file by using 3-Key-Triple-DES (encryption key: 168 bits) of SP800-67.
(By the same token, it becomes a transmission data of S/MIME.)
FCS-COP.1 encrypts these encryption keys are encrypted by RSA of FIPS 186-2 that is a
public key of S/MIME certificate of each destination.
This security objective is satisfied by the completion of these plural function requirements.
z O. FAX-CONTROL (Fax unit control)
This security objective regulates to prohibit an access to internal network which the MFP
concerned connects with, from public line via the port of Fax public line.
This means that communication, like remote diagnostic function or illegal operation
command, except image data which is sent from public line network and forwarded to
internal network via MFP is not forwarded to internal network, and various requirements
related to the flow control of Fax unit are necessary.
Applying FDP_IFC.1 and FDP_IFF.1, the flow control not to send data, except the image data
which the reception function from a public line received, to internal network is achieved.
This security objective is satisfied by the completion of this function requirement.
z O.AUTH-CAPABILITY (Support action to use user authentication function)
This security objective regulates that the user authentication function is used by the user
information management server that is the entity of a necessary IT environment for the
security maintenance of TOE, and needs various requirements that relate to the encryption.
Applying FIT_CAP.1[1], the inquiry and the acquirement function for the authentication
objective user are achieved for the user identification and authentication function by the
Active Directory of the user information management server.
This security objective is satisfied by the completion of this function requirement.
z O.CRYPTO-CAPABILITY (Support action to use the HDD encryption function)
This security objective regulates that TOE's support action for the data stored in HDD is
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
78 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
encrypted by ASIC that is the entity out of TOE, and needs various requirements that
regulates the support of external entity action.
Applying FIT_CAP.1[2], a support function to process all data in HDD through the HDD
encryption function implemented by ASIC is achieved for that HDD encryption function.
This security objective is satisfied by the completion of this function requirement.
¾ set.admin (Set of necessary requirement to keep administrator secure)
<Identification and Authentication of an administrator>
FIA_UID.2[2] and FIA_UAU.2[2] identifies and authenticates that the accessing user is a
administrator.
FIA_UAU.7 returns "*" for each character entered as feedback protected in the panel, and
supports the authentication.
FIA_AFL.1[8] refuses, in case of the failure authentication tried from the panel, all the input
receipts from the panel for five seconds in every failure. When the failure authentication
reaches 1-3 times, FIA_AFL.1[2] logoffs if it's under authentication, and locks all the
authentication functions that use the administrator password from then on. The release
function is executed by starting TOE with turning OFF and ON the power supply, so that the
lock is released after the release time of operation prohibition for administrator
authentication passed.
FMT_MTD.1[3] permits only to the administrator the setting of the threshold of the
authentication failure frequency which is the trial frequency of the failure authentication in
the administrator authentication and change of the release time of operation prohibition for
administrator authentication.
<Management of session of identified and authenticated administrator>
The duration of session of the administrator who is identified and authenticated contributes
to reduce the chance of attacking associated with unnecessary session connection by ending
the session after the panel automatic logoff time elapses by FTA_SSL.3. if it logs in from the
panel. The change in the panel auto logoff time is limited to the administrator by
FMT_MTD.1[3].
<Management of administrator's authentication information>
FIA_SOS.1[1] verifies the quality of the administrator password. Moreover, FIA_SOS.[5]
verifies the quality of session information used to authenticate the administrator via the
network, and FIA_SOS.2 secures the quality of session information that is generated and
used. FMT_MTD.1[6] restricts the change in the administrator password to the administrator
and the service engineer. When the administrator changes the administrator password,
FIA_UAU.6 re-authenticates it. In this re-authentication, when the failure authentication
reaches 1-3 times, FIA_AFL.1[2] logoffs it if it's under authentication, and releases the
authentication status of the administrator from then on. And it locks all the authentication
functions to use the administrator password. The release function is executed by starting
TOE with turning OFF and ON the power supply, so that the lock is released after the release
time of operation prohibition for administrator authentication passed.
<Role and management function for each management>
FMT_SMR.1[1] have service engineer maintain the role to do these management, and
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
79 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
FMT_SMR.1[2] have the administrator do the same. Additionally, FMT_SMF.1 specifies these
management functions.
¾ set.service (Set of necessary requirement to keep service engineer secure)
<Identification and Authentication of a service engineer>
FIA_UID.2[1] and FIA_UAU.2[1] identifies and authenticates that the accessing user is a
service engineer.
FIA_UAU.7 returns "*" every one character entered as the feedback protected in the panel,
and supports the authentication.
FIA_AFL.1[8] refuses all the input receipts from the panel for five seconds at each failure,
and when the failure authentication reaches 1-3 times, FIA_AFL.1[1] logoffs it if it's under
authentication, and locks all the authentication functions to use the CE password. The CE
authentication lock release function is executed and the release time of operation prohibition
for CE authentication passes, so that this lock status is released.
FMT_MTD.1[3] permits only to the administrator the setting of the threshold of the
authentication failure frequency that is the trial frequency of the failure authentication in the
service engineer authentication. FMT_MTD.1[9] permits only to the service engineer the
setting of the release time of operation prohibition for CE authentication.
<Management of service engineer's authentication information>
FIA_SOS.1[1] verifies the quality of the CE password. FMT_MTD.1[9] restricts the change in
the CE password to the service engineer. Moreover, FIA_UAU.6 re-authenticates it. In this
re-authentication, when the failure authentication reaches 1-3 times, FIA_AFL.1[1] releases
the authentication status of the service engineer and locks all the authentication functions to
use the CE password. The secret lock release function is executed and the release time of
operation prohibition for CE authentication passes, so that this lock status is released.
<Role and management function for each management>
FMT_SMR.1[1] maintains the role to do these management as a service engineer.
FMT_SMF.1 specifies these management functions.
6.2.1.3. Dependencies of IT Security Functional Requirements
The dependencies of the IT security functional requirements components are shown in the
following table. When a dependency regulated in CC Part 2 is not satisfied, the reason is
provided in the section for the "dependencies Relation in this ST."
Table 10 Dependencies of IT Security Functional Requirements Components
N/A : Not Applicable
Functional
Requirements
Component for
this ST
FCS_CKM.1
Dependencies on CC Part 2
Dependencies Relation in this ST
FCS_CKM.2 or FCS_COP.1,
FCS_CKM.4
FCS_COP.1 (only partial event)
<The reason not to fulfill partially FCS_CKM.2 or
FCS_COP.1>
The cryptographic operation is performed using key
generated Konica Minolta HDD cryptographic key
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
80 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
Functional
Requirements
Component for
this ST
Dependencies on CC Part 2
Dependencies Relation in this ST
generation algorithm in the IT environment by
FIT_CAP.1[1]. TSF only uses this capability, and there
is no necessity of the distribution and cryptographic
operation.
FCS_CKM.1 or FDP_ITC.1
or FDP_ITC.2, FCS_CKM.4
FCS_COP.1
FDP_ACC.1[1]
FDP_ACC.1[2]
FDP_ACC.1[3]
FDP_ACC.1[4]
FDP_ACF.1[1]
FDP_ACF.1[2]
FDP_ACF.1[3]
FDP_ACF.1
FDP_ACF.1
FDP_ACF.1
FDP_ACF.1
FDP_ACC.1,
FMT_MSA.3
FDP_ACC.1,
FMT_MSA.3
FDP_ACC.1,
<The reason not to apply FCS_CKM.4>
The encryption key is regularly kept for the stored
data. Moreover, an arbitrary access to the storage
medium is difficult, and there is no necessity of the
encryption key cancellation.
FCS_CKM.1 ( only a part of the phenomenon )
The satisfied events: The encryption key for
enciphering the attached file by the S/MIME
communication is generated.
<The reason not to satisfy a part of the FCS_CKM.1 or
FDP_ITC.1 or FDP_ITC.2>
- It seems proper to use FDP_ITC.1 because the
public key to encrypt the encryption key for the
data encryption of S/MIME is imported outside of
TSF control area, but S/MIME certificate is
registered by the administrator's operation. In that
case, it is unnecessary to consider whether it
passes thorough the untrusted channel or not.
There is not inevitability to apply the security
requirement (The use under the condition that
A.NETWORK is realized) .
- Also, the attribute information of imported
encryption key doesn't apply to the security
attribute used for the access control, etc., is not
related to the initialization, etc., so there is no
necessity to apply.
- In FMT_MTD.1[11], it is expressed as registration
of TSF data, and the object of import operation is
assigned to an appropriate role.
- As a result, the event corresponding to the key
management is explained by using not the security
requirement that is showed in the dependencies
but other security requirement, so that it's no
problem even if this dependencies is not satisfied.
<The reason not apply FCS_CKM.4>
The Encryption Key is stored constantly for the
stored data. The arbitrary access to the storing media
is difficult, so it is not necessary to cancel the
Encryption Key.
FDP_ACF.1[1]
FDP_ACF.1[2]
FDP_ACF.1[3]
FDP_ACF.1[4]
FDP_ACC.1[1],
FMT_MSA.3[1], FMT_MSA.3[3]
FDP_ACC.1[2]
FMT_MSA.3[2]
FDP_ACC.1[3]
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
81 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
Functional
Requirements
Component for
this ST
Dependencies on CC Part 2
FMT_MSA.3
FDP_ACF.1[4]
FDP_IFC.1
FDP_IFF.1
Dependencies Relation in this ST
<The reason not to apply FMT_MSA.3>
There is no necessity for applying this requirement
because the object attribute doesn't exist.
FDP_ACC.1[4]
FMT_MSA.3[4]
FDP_IFF.1
FDP_ACC.1,
FMT_MSA.3
FDP_IFF.1
FDP_IFC.1,
FMT_MSA.3
FDP_IFC.1
<The reason not to apply FMT_MSA.3>
There is no necessity for applying this requirement
because the security attribute is initialized outside.
FIA_UAU.2[1]
FIA_UAU.2[2]
FIA_UAU.2[2]
FIA_UAU.1[1]
FIA_UAU.2[3]
FIA_UAU.2[4]
FIA_UAU.1[2]
FIA_UAU.2[1], FIA_UAU.2[2], FIA_UAU.1[1],
FIA_UAU.2[3], FIA_UAU.2[4], FIA_UAU.1[2]
FIA_UAU.2[2]
N/A
N/A
N/A
N/A
N/A
N/A
N/A
FIA_UID.2[1]
FIA_UID.2[2]
FIA_UID.2[3]
FIA_UID.2[4]
FIA_UID.2[5]
FIA_UID.2[6]
FIA_AFL.1[1]
FIA_AFL.1[2]
FIA_AFL.1[3]
FIA_AFL.1[4]
FIA_AFL.1[5]
FIA_AFL.1[6]
FIA_AFL.1[7]
FIA_AFL.1[8]
FIA_UAU.1
FIA_UAU.1
FIA_UAU.1
FIA_UAU.1
FIA_UAU.1
FIA_UAU.1
FIA_UAU.1
FIA_UAU.1
FIA_AFL.1[9]
FIA_ATD.1
FIA_SOS.1[1]
FIA_SOS.1[2]
FIA_SOS.1[3]
FIA_SOS.1[4]
FIA_SOS.1[5]
FIA_SOS.2
FIA_UAU.2[1]
FIA_UAU.2[2]
FIA_UAU.1[1]
FIA_UAU.2[3]
FIA_UAU.2[4]
FIA_UAU.1[2]
FIA_UAU.6
FIA_UAU.7
FIA_UAU.1
None
None
None
None
None
None
None
FIA_UID.1
FIA_UID.1
FIA_UID.1
FIA_UID.1
FIA_UID.1
FIA_UID.1
FIA_UID.2[1]
FIA_UID.2[2]
FIA_UID.2[3]
FIA_UID.2[4]
FIA_UID.2[5]
None
None
None
None
None
None
N/A
FIA_UAU.2[1], FIA_UAU.2[2], FIA_UAU.1[1],
FIA_UAU.2[3], FIA_UAU.2[4], FIA_UAU.1[2]
N/A
N/A
N/A
N/A
N/A
N/A
None
FIA_ATD.1
FMT_SMF.1,
FMT_SMR.1
FMT_SMF.1,
FMT_SMR.1
N/A
FIA_ATD.1
FMT_SMF.1,
FMT_SMR.1[1], FMT_SMR.1[2]
FMT_SMF.1,
FMT_SMR.1[2]
FMT_MOF.1[3]
FMT_SMF.1,
FMT_SMR.1
FMT_SMF.1,
FMT_SMR.1[2]
FMT_MSA.1[1]
FDP_ACC.1 or FDP_IFC.1,
FDP_ACC.1[1],
FIA_UID.2[6]
FIA_UID.2[7]
FIA_USB.1
FMT_MOF.1[1]
FMT_MOF.1[2]
None
FIA_UAU.1
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
82 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
Functional
Requirements
Component for
this ST
FMT_MSA.1[2]
FMT_MSA.1[3]
FMT_MSA.3[1]
Dependencies on CC Part 2
Dependencies Relation in this ST
FMT_SMF.1,
FMT_SMR.1
FDP_ACC.1 or FDP_IFC.1,
FMT_SMF.1,
FMT_SMR.1
FMT_SMF.1,
FMT_SMR.1[2], FMT_SMR.1[3]
FDP_ACC.1[1],
FMT_SMF.1,
FMT_SMR.1[2], FMT_SMR.1[4]
FDP_ACC.1 or FDP_IFC.1,
FMT_SMF.1,
FMT_SMR.1
FDP_ACC.1[1],
FMT_SMF.1,
FMT_SMR.1[2], FMT_SMR.1[6]
FMT_MSA.1,
FMT_SMR.1
FMT_MSA.1,
FMT_SMR.1
FMT_MSA.1[1], FMT_MSA.1[2],
FMT_SMR.1[3]
Neither is applicable.
<The reason not to apply FMT_MSA.1>
This is the internal control ID that is identified
uniquely, and this does not require the management
FMT_MSA.3[2]
such as change or deletion, after this is assigned once.
FMT_MSA.1,
FMT_SMR.1
<The reason not to apply FMT_MSA.1>
The user box attribute of a user box file always needs
to correspond with the user box. Therefore, the value
only has to be given at the time of storage.
It is not necessary to change the value of this attribute
at the time of other operational timing.
Accordingly, the management requirement is
unnecessary.
FMT_MSA.3[3]
FMT_MSA.1,
FMT_SMR.1
FMT_MSA.3[4]
<FMT_SMR.1>
The assignment of FMT_MSA.3.2[2] is not applicable.
FMT_SMR.1 is the dependency that is set relating to
the following and so there is no necessity of
application.
Neither is applicable.
<FMT_SMR.1>
The assignment of FMT_MSA.3.2[3] is not applicable.
FMT_SMR.1 is the dependency that is set relating to
the following and so there is no necessity of
application.
Neither is applicable.
<The reason not to apply FMT_MSA.1>
It is the concept of ID & print that the object is a print
object to which only the person who stored it can
access, so it is not assumed that the object is
transferred to any other user. Consequently, it is not
necessary to change the value of the attribute when
the user performs operations other than store, so that
the management requirement is unnecessary.
<FMT_SMR.1>
The assignment of FMT_MSA.3.2[4] is not applicable.
FMT_SMR.1 is the dependency that is set relating to
the following and so there is no necessity of
application.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
83 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
Functional
Requirements
Component for
this ST
Dependencies on CC Part 2
Dependencies Relation in this ST
FMT_SMF.1,
FMT_SMR.1
FMT_SMF.1,
FMT_SMR.1
FMT_SMF.1,
FMT_SMR.1
FMT_SMF.1,
FMT_SMR.1
FMT_SMF.1,
FMT_SMR.1
FMT_SMF.1,
FMT_SMR.1
FMT_SMF.1,
FMT_SMR.1
FMT_SMF.1,
FMT_SMR.1
FMT_SMF.1,
FMT_SMR.1
FMT_SMF.1
FMT_SMR.1
FMT_SMF.1
FMT_SMR.1
FMT_SMF.1,
FMT_SMR.1[2]
FMT_SMF.1,
FMT_SMR.1[2] , FMT_SMR.1[3]
FMT_SMF.1,
FMT_SMR.1[2]
FMT_SMF.1,
FMT_SMR.1[2], FMT_SMR.1[4]
FMT_SMF.1,
FMT_SMR.1[2], FMT_SMR.1[3]
FMT_SMF.1,
FMT_SMR.1[1], FMT_SMR.1[2]
FMT_SMF.1,
FMT_SMR.1[2]
FMT_SMF.1,
FMT_SMR.1[3]
FMT_SMF.1
FMT_SMR.1[1]
FMT_SMF.1
FMT_SMR.1[2], FMT_SMR.1[5]
FMT_SMF.1
FMT_SMR.1[2]
FMT_MTD.1[12]
FMT_SMF.1
FMT_SMR.1
FMT_MTD.1[13]
FMT_SMF.1
FMT_SMR.1
FMT_SMF.1
FMT_SMR.1[2]
FMT_SMR.1[6]
FMT_SMF.1
FMT_SMR.1[2]
FMT_SMF.1
FMT_SMR.1[1]
FMT_SMR.1[2]
FMT_SMR.1[3]
FMT_SMR.1[4]
FMT_SMR.1[5]
None
FIA_UID.1
FIA_UID.1
FIA_UID.1
FIA_UID.1
FIA_UID.1
N/A
FIA_UID.2[1]
FIA_UID.2[2]
FIA_UID.2[3]
FIA_UID.2[5]
FIA_UID.2[7]
FMT_SMR.1[6]
FTA_SSL.3
FTP_ITC.1
FAD_RIP.1
FIT_CAP.1[1]
FIA_UID.1
FIA_UID.2[6]
None
None
None
N/A
N/A
N/A
None
None
N/A
N/A
FMT_MTD.1[1]
FMT_MTD.1[2]
FMT_MTD.1[3]
FMT_MTD.1[4]
FMT_MTD.1[5]
FMT_MTD.1[6]
FMT_MTD.1[7]
FMT_MTD.1[8]
FMT_MTD.1[9]
FMT_MTD.1[10]
FMT_MTD.1[11]
FIT_CAP.1[2]
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
84 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
6.2.2. Rationale for IT Security Assurance Requirements
This TOE is installed and used in an environment where adequate security is maintained in
terms of the physical, personnel, and connectivity. Nonetheless, adequate effectiveness in the
environment where the TOE is used must be assured. As a general commercial office product,
the execution of tests based on function specifications and high level design, and analysis of the
strength of function and a search for vulnerabilities are required. In addition, it is desirable that
it has a development environment control, a configuration management for the TOE and a
secure distribution procedure. And therefore the selection of EAL3, which provides an adequate
assurance level, is reasonable.
The secure requirement dependency analysis is assumed to be appropriate because the
package EAL has been selected, therefore details are not discussed.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
85 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
7. TOE Summary Specification
The list of the TOE security function led from the TOE security function requirement is shown
in Table 11 below. The detailed specification is explained in the paragraphs described below.
Table 11 Names and Identifiers of TOE Security Function
No.
TOE Security Function
1
2
3
4
5
6
7
8
9
10
11
12
13
F.ADMIN
F.ADMIN-SNMP
F.SERVICE
F.USER
F.BOX
F.PRINT
F.OVERWRITE-ALL
F.CRYPT
F.RESET
F.TRUSTED-PASS
F.S/MIME
F.FAX-CONTROL
F.SUPPORT-AUTH
Administrator function
SNMP administrator function
Service mode function
User function
User box function
Secure print function, ID & print function
All area overwrite deletion function
Encryption key generation function
Authentication Failure Frequency Reset function
Trusted Channel function
S/MIME encryption processing function
Fax unit control function
External Server authentication operation support function
14
15
F.SUPPORT-CRYPTO
F.ADMIN-WebDAV
ASIC support function
Administrator function (Counter management function)
7.1. F.ADMIN (Administrator Function)
F.ADMIN is a series of security function that administrator operates, such as an administrator
identification authentication function in an administrator mode accessing from a panel or
through a network, and a security management function that includes a change of an
administrator password and a lock cancellation of a locked user box. (Nevertheless, all functions
are not feasible functions through both a panel and a network.)
7.1.1. Administrator Identification Authentication Function
It identifies and authenticates the accessing user as the administrator in response to the
access request to the administrator mode.
z Provides the administrator authentication mechanism authenticating by the administrator
password that consists of the character shown in Table 12.
¾ Provides the administrator authentication mechanism using the session information
besides the administrator password, after the administrator is authenticated to the access
from the network,
¾ According to protocol, use the session information of more than 1010, or generate and use
the session information more than 1010.
z Return "*" for each character as feedback for the entered administrator password.
z Resets the number of authentication failure when succeeding in the authentication.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
86 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
z In the case of access from a panel, it doesn't accept the input from a panel for five seconds
when failing in the authentication.
z Locks all the authentication functions to use the administrator password when detecting the
authentication failure that becomes 1-3 times at total in each authentication function by
using the administrator password. (Refuse the access to the administrator mode)
¾
The administrator specifies the failure frequency threshold by the unauthorized access
detected threshold setting function.
z F.RESET works, so that the lock of authentication function is released.
As described above, FIA_AFL.1[2], FIA_AFL.1[8], FIA_SOS.1[5], FIA_SOS.2. FIA_UAU.2[2],
FIA_UAU.7 and FIA_UID.2[2] are realized.
Table 12 Characters and Number of Digits for Password
Objectives
Number
13
Characters
of digits
CE Password
8
Selectable from 93 or more characters in total
(Alphabet, numeric, and symbols (Some are not included.)
Administrator Password
Account Password
User Box Password
Secure Print Password
WebDAV Server Password
Encryption passphrase
20
Selectable from 83 or more characters in total
(Alphabet, numeric, and symbols (Some are not included.)
User Password
8 or more
Selectable from 188 or more characters in total
(Alphabet, numeric, symbols (Some are not included.), and
special characters (Some are not included.)
SNMP Password
- Privacy Password
8 or more
Selectable from 90 or more characters in total
(Alphabet, numeric, and symbols (Some are not included.)
- Authentication Password
7.1.2. Auto Logoff Function of Administrator Mode
While accessing an administrator mode from a panel, if not accepting any operation during the
panel automatic logoff time, it logs off the administrator mode automatically.
As described above, FIA_SSL.3 is realized.
7.1.3. Function Supported in Administrator Mode
When a user is identified and authenticated as an administrator by the administrator
identification authentication function at the accessing request to the administrator mode, the
administrator authority is associated with the task substituting the user. And the following
operations and the use of the functions are permitted.
As described above, FIA_ATD.1 and FIA_USB.1 are realized.
13
Table 12 shows the minimum password space as the security specification. Therefore, although some excluded
characters are shown depending on the password type, the excluded characters are permitted to use if possible.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
87 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
7.1.3.1. Change of Administrator Password
When a user is re-authenticated as an administrator by the panel and the new password
satisfies the quality, the password is changed.
z Provides the administrator authentication mechanism that is authenticated by the
administrator password which consists of the character shown in Table 12.
z Resets the number of authentication failure when succeeding in the re-authentication.
z Return "*" for each character as feedback for the entered administrator password in the
re-authentication by the access from the panel.
z When the authentication failure that becomes 1-3 times at total in each authentication
function by using the administrator password is detected, it logoffs the administrator mode
accessing from the panel, and locks all the authentication functions to use the administrator
password. (The access to the administrator mode is refused.)
¾
The administrator specifies the failure frequency threshold by the unauthorized access
detection threshold setting function.
z F.RESET works, so that the lock of the authentication function is released.
z Verify the new administrator password if the following qualities are satisfied.
¾
It is composed of the characters and by the number of digits, shown in the Table 12.
¾
It shall not be composed of one kind of character.
¾
It doesn't match with the current value.
As described above, FIA_AFL.1[2], FIA_SOS.1[1], FIA_UAU.6, FIA_UAU.7, FMT_MTD.1[6],
FMT_SMF.1 and FMT_SMR.1[2] are realized.
7.1.3.2. User Setup
z User Registration (Only the user who uses with the machine authentication as User
authentication method.)
User is registered by setting the user ID (Though user ID is composed of the user name and
the authentication server information 14, only user name is registered in case of the machine
authentication.) and registering the user password. It verifies whether the user password
newly set have been satisfied the following qualities.
¾
It is composed of the characters and by the number of digits, shown in the Table 12.
¾
It shall not be composed of one kind of character.
While the external server authentication is effective, the user password cannot be registered.
Also register the belonging account (account ID), and relate. (The account setting is
necessary beforehand.)
z Change of user password (Only the user who uses with the machine authentication as User
authentication method.)
User password is changed. It verifies whether the user password newly set have been
satisfied the following qualities.
14
It associates with the external server authentication setting data that is set in the case of the use of the
external server (only Active Directly method is applicable) as the method of the user authentication function.
Because it deals when there are plural user information management servers, there is a case in which plural sets
of authentication server information are included in the external server information setting data.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
88 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
¾
It is composed of the characters and by the number of digits, shown in the Table 12.
¾
It shall not be composed of one kind of character.
¾
It shall not be equal to the value which is currently set.
z User deletion
User ID and user password is deleted.
When a personal user box that a concerned user owns exists, that personal user box is
¾
automatically set to the public user box of "user attributes: public."
z Pause/resume of User (Only in the machine authentication as User authentication method.)
User ID is designated, and the use of the user is paused or the use of the user in the pause
state is resumed. The user in the pause state is not identified and not authenticated, so that
the user cannot do the user function after identification and authentication.
z Change of the belonging account
The belonging account that related to user is changed
As described above, FIA_SOS.1[3], FMT_MTD.1[1], FMT_MTD.1[2], FMT_MTD.1[3],
FMT_MTD.1[10], FMT_MTD.1[12], FMT_MTD.1[13], FMT_SMF.1 and FMT_SMR.1[2] are
realized.
7.1.3.3. User Box Setup
z User Box Registration
When the administrator attribute is related, the view of the list of user boxes is permitted. A
personal user box, a group user box, and a public user box are registered by selecting the user
attribute to the non-registration user box ID selected from the list of user boxes. When they
are registered, “public” is specified on the user attribute of the user box by default, however, a
user ID or an account ID can be selected.
¾
In the case of the personal user box, the arbitrary user ID registered is specified.
¾
In the case of the public user box, verify that a user box password registered satisfies the
following conditions.
•
It is composed of the characters and by the number of digits, shown in the Table 12.
•
It shall not be composed of one kind of character.
Specify the arbitrary account ID registered when Group user box.
¾
z Change of User Box Password
¾
The user box password set to the public user box is changed.
¾
It verifies whether the user box password newly set have been satisfied the following
qualities.
•
It is composed of the characters and by the number of digits, shown in the Table 12.
•
It shall not be composed of one kind of character.
•
It shall not be equal to the value which is currently set.
z Change of user attribute of user box
¾
Specify the user attribute of a personal user box to the other user or the account that
registered.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
89 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
Specify the user attribute of group user box to the user or the other account that
¾
registered.
Specify the user attribute of public user box to the user or account that registered.
¾
Specify the user attribute of a personal user box or group user box to public.
¾
•
If a user box password is not registered at the same time, the password shall be
registered, and the same processing as the change of user box password mentioned
above is performed.
As
described
above,
FDP_ACC.1[1],
FDP_ACF.1[1],
FIA_SOS.1[1],
FMT_MSA.1[1],
FMT_MSA.1[2], FMT_MSA.1[3], FMT_MSA.3[1], FMT_MTD.1[4], FMT_MTD.1[5], FMT_SMF.1
and FMT_SMR.1[2] are realized.
7.1.3.4. Release of Lock
Reset (clear all) the number of times of authentication failure for each users.
z
¾
If there is a user to whom access is locked, the lock is released.
Reset (clear all) the number of times of authentication failure for all secure print passwords.
z
¾
If there is a secure print password to which access is locked, the lock is released.
Reset (clear all) the number of times of authentication failure of each user boxes.
z
¾
If there is a user box to which access is locked, the lock is released.
Reset (clear all) the number of times of authentication failure of each account.
z
¾
If there is a user account to which access is locked, the lock is released.
Reset (clear all) the number of times of authentication failure of SNMP password.
z
¾
If there is a MIB object to which access is locked, the lock is released.
Reset (clear all) the number of times of authentication failure caused by the WebDAV server
z
password.
¾
If accessing by WebDAV is locked up, the lock is released.
As described above, FIA_AFL.1[3], FIA_AFL.1[4], FIA_AFL.1[5], FIA_AFL.1[6],
FIA_AFL.1[7], and FIA_AFL.1[9] are realized.
7.1.3.5. Setup of User Authentication Function
Set the following authentication method in a user authentication function.
z Machine authentication: Authentication method which utilizes a user password managed on
MFP sides.
z External server authentication : Authentication method which utilizes a user password
managed with a user information management server connected through a network.(Only
Active Directory method is object)
¾
When external server authentication is used, the external server authentication setting
data (Contain the multiple authentication server information, such as domain name to
which external server belongs) needs to be set.
Set the following authentication method in the account authentication function used with a
user authentication function.
z Account authentication function : synchronized method
The method which utilizes an account ID associated with user ID beforehand.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
90 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
z Account authentication function : method not synchronized
The method to authenticate by the account ID and the account password at the time of access,
without utilizing the account ID that associated with user ID beforehand.
z Account authentication function : not use
Utilize only the authentication function by user ID, and not utilize the authentication by
account information.
As described above, FMT_MOF.1[2], FMT_MOF.1[3], FMT_MTD.1[3], FMT_MTD.1[11],
FMT_SMF.1 and FMT_SMR.1[2] are realized.
7.1.3.6. Unauthorized Access Setup
z Setup of unauthorized access detection threshold
The unauthorized access detection threshold in the authentication operation prohibition
function is set for 1-3 times.
z Setup of the release time of operation prohibition for Administrator Authentication
Set the release time of operation prohibition for Administrator Authentication between 5-60
minutes.
As described above, FMT_MTD.1[3], FMT_SMF.1 and FMT_SMR.1[2] are realized.
7.1.3.7. Setup of Auto Logoff Function
The panel auto logoff time which is the setting data of the auto logoff function should be set
within the following time range.
z panel auto logoff time
: 1-9 minutes
As described above, FMT_MTD.1[3], FMT_SMF.1 and FMT_SMR.1[2] are realized.
7.1.3.8. Network Setup
A setup operation of the following setting data is performed.
z A series of setup data that relates to SMTP server (IP address, Port Number, etc.)
z A series of setup data that relates to DNS server (IP address, Port Number, etc.)
z A series of setup data that relates to MFP address (IP address, NetBIOS Name, AppleTalk
Printer Name, etc.)
As described above, FDP_ACC.1[3] and FDP_ACF.1[3] are realized.
7.1.3.9. Execution of Back-up and Restoration Function
All the setting data stored in NVRAM and HDD are backed-up and re-stored except the
administrator password, the CE password, and encryption passphrase. As the object related to
security, due to the relation of confidentiality and completeness, the one shown by the following
classifications is targeted.
<Type A : Object to which back-up and restoration should be limited>
z SNMP password
z User password
z Account password
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
91 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
z Secure print password
z User Box password
z WebDAV server password
<Type B : Object to which restoration should be limited>
z A series of data that relates to SMTP server setting
z A series of data that relates to DNS server setting
z A series of data that relates to MFP address setting
z Operation setting data of SNMP password authentication function
z Setting data of Enhanced Security function
z Setting data of operation method of user authentication function
z Operation setting data of account authentication function
z Authentication failure frequency threshold of authentication operation prohibition function
z Panel auto logoff time
z User ID
z User attribute of user box
z User box ID
z S/MIME certificate
z Transmission address data
z Encryption strength setting data in S/MIME function
z SSL certificate
z Belonging Account of user
z Release time of operation prohibition for Administrator authentication
z PC-FAX reception setting
z TSI receiving setting data
z External server authentication setting data
<Type C : Object to which back-up should be limited>
z Secure print file
z User box file
z ID & print file
As
described
above,
FDP_ACC.1[1],
FDP_ACC.1[2],
FDP_ACC.1[3],
FDP_ACC.1[4],
FDP_ACF.1[1], FDP_ACF.1[2] , FDP_ACF.1[3], FDP_ACF.1[4], FMT_MOF.1[1] , FMT_MOF.1[2] ,
FMT_MOF.1[3],
FMT_MSA.1[1]
,
FMT_MSA.1[2]
,
FMT_MSA.1[3],
FMT_MTD.1[2]
,
FMT_MTD.1[3] , FMT_MTD.1[4] , FMT_MTD.1[7], FMT_SMF.1 and FMT_SMR.1[2] are
realized.
7.1.3.10. Operation Setup of HDD Encryption Function
<Encryption Passphrase Change>
The encryption passphrase is changed. F.CRYPTO is performed when the newly setup encryption
passphrase satisfies quality requirements,
z Verify the encryption passphrase newly set if the following qualities are satisfied.
¾
It is composed of the characters and by the number of digits shown in Table 12.
¾
It shall not be composed of one kind of character.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
92 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
¾
It shall not be matched with the current value.
As described above, FIA_SOS.1[4], FMT_MTD.1[3], FMT_SMF.1 and FMT_SMR.1[2] are
realized.
7.1.3.11. Change of SNMP Password
The SNMP password (Privacy password and Authentication password) is changed. This is
performed when the newly setup password satisfies quality requirements.
¾
It is verified that the SNMP password which is newly set up satisfies the quality below:
z
¾ This password is composed of the characters and by the number of digits shown in Table
12.
¾ This password is not composed of one character only.
¾ This password is not equal to the currently setup password.
As described above, FIA_SOS.1[2], FMT_MTD.1[3], FMT_SMF.1, and FMT_SMR.1[2] are
realized.
7.1.3.12. Setup of SNMP Password Authentication Function
The authentication method in the SNMP password authentication function is set to "Only
Authentication password" or the "Authentication password and Privacy password".
As described above, FMT_MOF.1[2], FMT_SMF.1 and FMT_SMR.1[2] are realized.
7.1.3.13. Account Setup
z Account registration
Account is registered by setting the account ID and registering the account password. It
verifies whether the account password newly set have been satisfied the following qualities.
¾ It is composed of the characters and by the number of digits, shown in Table 12.
¾ It shall not be composed of one kind of character.
z Change of account ID and account password
Account ID and account password is changed. It verifies whether the account password
newly set have been satisfied the following qualities.
¾ It is composed of the characters and by the number of digits, shown in Table 12.
¾ It shall not be composed of one kind of character.
¾ It shall not be equal to the current setting.
z Account deletion
Account ID and account password are deleted.
¾ When the Group box of the account ID exists, that group user box is automatically set to
the public user box of "user attributes: public."
z
Pause/resume of Account
Account ID is designated, and the use of the account is paused or the use of the account in
the pause state is resumed. The account in the pause state is not identified and not
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
93 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
authenticated, so that the user cannot do the user function which needs account
identification and authentication.
As described above, FIA_SOS.1[1], FMT_MSA.1[3], FMT_MTD.1[3], FMT_MTD.1[11],
FMT_MTD.1[13], FMT_SMF.1 and FMT_SMR.1[2] are realized.
7.1.3.14. Setup of Trusted Channel Function
Set the setting data of Trusted Channel function by SSL/TLS
z Communication Encryption Strength Setting (Modification of the communication encryption
method.)
z Operation and Stop Setting of the Trusted Channel function
As described above, FMT_MOF.1[3], FMT_SMF.1 and FMT_SMR.1[2] are realized.
7.1.3.15. Setup of S/MIME Transmission Function
Set the setting data which are used when the user box file is S/MIME transmitted.
z Transmission address data (e-mail address)
z Registration and modification of S/MIME certificate
z Setup of Encryption Strength for S/MIME function
As
described
above,
FDP_ACC.1[3],
FDP_ACF.1[3],
FMT_MOF.1[2],
FMT_MTD.1[3],
FMT_MTD.1[11], FMT_SMF.1, and FMT_SMR.1[2] are realized.
7.1.3.16. Setup of FAX
Set the setting data of FAX related settings as follows,
z PC-FAX reception Setting
¾
Setting either of two modes at PC-FAX operation which are to store in each box and to
store in common area for all users according to the designated information at FAX
transmission.
z TSI receiving Setting
¾
Setting the storing box at TSI receiving relating the transmitter’s telephone number with
the box as the identification information of transmitter’s terminal.
As described above, FDP_ACC.1[3], FDP_ACP.1[3], FMT_MTD.1[3], FMT_MTD.1[11],
FMT_SMF.1 and FMT_SMR.1[2] are realized.
7.1.3.17. Function Related to Enhanced Security Function
The function that influences the setup of the Enhanced Security function that the
administrator operates is as follows. (* It has explained the influence of the backup and
restoration function in 7.1.3.9.)
z Operational setup of Enhanced Security function
Function to set valid or invalid of Enhanced Security function.
z HDD logical format function
Function to write the default value of management data using the file system of HDD. Along
with the execution of this logical format, the setup of the Enhanced Security function is
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
94 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
invalidated.
z All area overwrite deletion function
The setup data of enhanced security function are invalidated by executing the overwrite
deletion of all area
As described above, FMT_MOF.1[1], FMT_SMF.1 and FMT_SMR.1[2] are realized.
7.1.3.18. Function Related to Password Initialization Function
The function that relates to the initialization of the password that the administrator operates
is as follows.
z All area overwrite deletion function
The settings of the administrator password and the SNMP password are initialized to the
values at factory shipment by executing the overwrite deletion of all area
As described above, FMT_MTD.1[3] , FMT_MTD.1[6], FMT_SMF.1 and FMT_SMR.1[2] are
realized.
7.1.3.19. Change of WebDAV Server Password
The WebDAV server password is changed. This is performed when the newly setup WebDAV
server password satisfies the quality.
z
It is verified that the WebDAV server password which is newly set up satisfies the quality
below:
¾ The characters and the number of digits of this password conform to those specified in
Table 12.
¾ This password is not composed of one character only.
¾ This password is not equal to the currently setup password.
As described above, FIA_SOS.1[1], FMT_MTD.1[3], FMT_SMF.1, and FMT_SMR.1[2] are
realized.
7.1.3.20. Operational Setup of the ID & Print Function
The operation modes of the ID & print function are set up as follows:
z
ID & print automatic operation mode
An operation mode that stores a print file sent from a client PC as an ID & print file even if
printing is requested by the normal print setup.
z
ID & print specified operation mode
An operation mode that stores a print file sent from a client PC as an ID & print file only
when it is requested to store that file as an ID & print file.
As described above, FMT_MOF.1[2], FMT_SMF.1, and FMT_SMR.1[2] are realized.
7.2. F.ADMIN-SNMP (SNMP Administrator Function)
F.ADMIN-SNMP is a security function, which identifies and authenticates the administrator
in the access through the network by using SNMP from client PC, and then permits the
operation of a setting function of the network only to the administrator whose identification and
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
95 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
authentication was succeeded.
7.2.1. Identification and Authentication Function by SNMP Password
It identifies and authenticates by the SNMP password, that the user who accesses the MIB
object through the network with the use of SNMP is an administrator
z Provides the SNMP authentication mechanism which authenticates by the SNMP password
that consists of the character shown in Table 12.
¾ Only Authentication password or both the Privacy password and the Authentication
password is used.
¾ In the case of SNMP, the SNMP password is used for every session without requiring the
administrator authentication mechanism by the separate session information.
z Reset the authentication failure frequency if it succeeds in authentication.
¾ In the case of both the Privacy password and the Authentication password are used, the
authentication failure frequency is reset only when both passwords together succeeded in
the authentication.
z When the authentication failure that becomes the 1-3 times at total in each authentication
function by using the SNMP password is detected, all the authentication functions to use the
SNMP password are locked. (The access to the MIB object is refused.)
¾ The administrator specifies the failure frequency threshold by the unauthorized access
detection threshold setting function.
¾ In the case of both the Privacy password and the Authentication password are utilized,
even though both passwords together fails in authentication, it is detected as one failure.
z The lock status is released when the lock release function to the MIB object of F. ADMIN is
performed.
As described above, FIA_AFL.1[3] , FIA_UAU.2[2] and FIA_UID.2[2] are realized.
7.2.2. Management Function using SNMP
When it is identified and authenticated that the user is an administrator by the SNMP
password, the access to the MIB object is permitted, and then the operation of the setting data
shown below is permitted to be done.
(1) Network Setup
Setup operation of the following setting data is performed.
¾ Setting data that relates to SMTP server (IP address, port number, etc.)
¾ Setting data that relates to DNS server (IP address, port number, etc.)
¾ A series of setting data that relates to MFP address (IP address, NetBIOS name, AppleTalk
printer name, etc.)
As described above, FDP_ACC.1[3] and FDP_ACF.1[3] are realized
(2) Change of SNMP password
The SNMP password (Privacy password and Authentication password) is changed. Verify that
the SNMP password newly set satisfies the following qualities.
¾ It is composed of the characters and by the number of digits shown in Table 12.
¾ This password is not composed of one character only.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
96 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
¾ This password is not equal to the currently setup password.
As described above, FIA_SOS.1[2], FMT_MTD.1[3] , FMT_SMF.1 and FMT_SMR.1[2] are
realized.
(3) Setup of SNMP password authentication function
The authentication method in the SNMP password authentication function is set to the
"Authentication password only" or the "Privacy password and the Authentication password".
As described above, FMT_MOF.1[2] , FMT_SMF.1 and FMT_SMR.1[2] are realized.
7.3. F.SERVICE (Service Mode Function)
F.SERVICE is a series of security function that the service engineer operates, such as the
service engineer identification authentication function in service mode accessing from a panel,
and a security management function that includes a change in the CE password and the
administrator password.
7.3.1. Service Engineer Identification Authentication Function
It is identified and authenticated the accessing user as the service engineer in response to the
access request to the service mode from the panel.
z Provides the CE authentication mechanism that is authenticated by the CE password that
consists of the character shown in Table 12.
¾
The CE authentication mechanism by the separate session information is not required
because the service mode can only be accessed from the panel.
z Return “*” for each character as feedback for the entered CE password.
z Resets the number of the authentication failure when succeeding in the authentication.
z Not accept the input from the panel for five seconds when the authentication failed.
z When the authentication failure that becomes 1-3 times at total in each authentication
function by using the CE password is detected, it locks all the authentication functions to use
the CE password. (The access to the service mode is refused.)
¾
The administrator specifies the failure frequency threshold by the unauthorized access
detection threshold setting function.
z Lock of authentication function is released with F.RESET function operated.
As
described
above,
FIA_AFL.1[1],
FIA_AFL.1[8],
FIA_UAU.2[1],
FIA_UAU.7
and
FIA_UID.2[1] are realized.
7.3.2. Function Supported in Service Mode
When a user is identified and authenticated as a service engineer by the service engineer
identification authentication function at the access request to the service mode, the use of the
following functions is permitted.
7.3.2.1. Change of CE Password
When a user is re-authenticated as a service engineer and the new password satisfies the
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
97 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
quality, it is changed.
z Provides the CE authentication mechanism that is re-authenticated by the CE password that
consists of the characters shown in Table 12.
z Resets the authentication failure frequency when succeeding in the re-authentication.
z Return "*" for each character as feedback for the entered service codes in the
re-authentication.
z When the authentication failure that becomes 1-3 times at total in each authentication
function by using the CE password is detected, it logoffs the service mode accessing from the
panel, and locks all the authentication functions to use the CE password. (The access to the
service mode is refused.)
¾ The administrator specifies the failure frequency threshold by the unauthorized access
detection threshold setting function.
z The F.RESET function unlocks the authentication function.
z It verifies that the CE password newly set satisfies the following qualities.
¾ It is composed of the characters and by the number of digits, shown in the Table 12.
¾ It shall not be composed of one kind of character.
¾ It shall not be matched with the current value.
As described above, FIA_AFL.1[1], FIA_SOS.1[1], FIA_UAU.6, FIA_UAU.7, FMT_MTD.1[9],
FMT_SMF.1 and FMT_SMR.1[1] are realized.
7.3.2.2. Change of Administrator Password
Change the administrator password. Verify that the administrator password newly set
satisfies the following qualities.
z It is composed of the characters and by the number of digits, shown in the Table 12.
z It shall not be composed of one kind of character.
z It shall not be matched with the current value.
As described above, FIA_SOS.1[1], FMT_MTD.1[6], FMT_SMF.1 and FMT_SMR.1[1] are
realized.
7.3.2.3. Setup of the release time of operation prohibition for CE Authentication
Set the release time of operation prohibition for CE Authentication between 5 - 60 minutes.
As described above, FMT_MTD.1[9], FMT_SMF.1 and FMT_SMR.1[1] are realized.
7.3.2.4. Function Related to Enhanced Security Function
The functions that influence the setting of the Enhanced Security function that the service
engineer operates are as follows.
z HDD logical format function
Function to write the value of management data using the file system of HDD. The setting of
the Enhanced Security function is invalidated along with the execution of this logical format.
z HDD physical format function
A function to rewrite the entire disk in HDD with a regulated pattern including the signal
rows such as the track and sector information. The setting of the Enhanced Security function
is invalidated along with the execution of this physical format.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
98 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
z Initialization function
Function to reset every setting value written in NVRAM to the factory default. The setup of
the Enhanced Security function is invalidated by executing this initialization function.
As described above, FMT_MOF.1[1], FMT_SMF.1 and FMT_SMR.1[1] are realized.
7.4. F.USER (User Function)
F.USER identifies and authenticates the user for the use of MFP various function. To the
identified and authenticated user, it provides the management function of the user password
that is managed in the MFP at the time of machine authentication, besides the permission of the
use of functions such as F.BOX and F.PRINT.
7.4.1. User Authentication Function
<User identification and authentication in Account Authentication: the synchronized method>
When the access request for the user box and the request for the atore of the secure print file,
it is identified and authenticated to be a permitted user. Account Name (account ID) is
associated with the concerned user ID that is set up beforehand besides the user ID for the
identified and authenticated user, and the use of F.BOX and F.PRINT is permitted to the
identified and authenticated user.
z Return "*" for each character as feedback for the entered user password.
z Resets the number of authentication failure when succeeding in the authentication.
z Not accept the access from the panel for five seconds when the authentication failed.
z When the authentication failure that becomes 1-3 times at total for the concerned user is
detected, it locks all the authentication functions to the user.
¾
The administrator specifies the failure frequency threshold by the unauthorized
access detection threshold setting function.
z To release the lock of the authentication function is to perform the lock release function to the
user authentication of F.ADMIN.
As described above, FIA_AFL.1[4], FIA_AFL.1[8], FIA_ATD.1, FIA_UAU. 1[1], FIA_UAU.7
FIA_UID.2[3] and FIA_USB.1 are realized.
< Account registration function when the belonging account of user is not registered in Account
Authentication: synchronized method>
z
Require the Account authentication after User identification and authentication.
z
Register the successful account ID as account name when succeeding in the account
authentication. (By this, FMT_MTD.1[12], FMT_SMS.1 and FMT_SMR.1[6] are realized.)
(The detail of the account authentication is the same as processing of the items explained in
the following < User identification and authentication in Account authentication: the
authentication method not synchronized>)
< User identification and authentication in Account Authentication: the authentication method
not synchronized>
When the access request for the user box and the request for the store of the secure print file,
it is identified and authenticated to be a permitted user. The detail of user authentication is the
same as account authentication: user identification and authentication in the synchronized
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
99 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
method. In the case of the access from the panel, the account authentication is required, Account
Name is associated with the user ID if succeeding the account authentication, and the use of
F.BOX and F.PRINT is permitted to the user who is identified and authenticated.
Provides account authentication mechanism that is authenticated the account by the
z
account password that consists of the characters shown in Table 12.
z
Return "*" for each character as feedback for the entered account password.
z
Resets the number of authentication failure when succeeding in the authentication.
z
Not accept the access from the panel for five seconds when the authentication failed.
z
When the authentication failure that becomes 1-3 times at total for the concerned account is
detected, it locks all the authentication functions to the account.
¾
The administrator specifies the failure frequency threshold by the unauthorized access
detection threshold setting function.
The lock of the authentication function is to perform the lock release function to the
z
concerned account of F.ADMIN.
As described above, FIA_AFL.1[7], FIA_AFL.1[8], FIA_ATD.1, FIA_UAU.1[2], FIA_UAU.7
FIA_UID.2[6] and FIA_USB.1 are realized.
When accessing from a network, the account is not authenticated after the user authentication
but the user and the account are processed with one sequence. When authenticating the account,
the account ID is associated with the user ID, and the user ID and the account ID are measured
by the session information which is the same as user identification and authentication in the
account authentication: the synchronized method.
z Provides the user authentication mechanism that authenticates the user that consists of the
characters shown in Table 12.
¾
After the user is authenticated to the access from the network, the user authentication
mechanism using session information besides the user password is provided.
¾
According to the protocol, it uses the session information more than 1010 or it generates
and uses the session information more than 1010.
As described above, FIA_ATD.1, FIA_SOS.1[5], FIA_SOS.2 and FIA_USB.1 are realized.
<User identification and authentication in Account Authentication: not use>
When the access request for the user box and the request for the registration atore of the
secure print file, it is identified and authenticated to be a permitted user. The use of F.BOX and
F.PRINT is permitted to the identified and authenticated user.
As described above, FIA_AFL.1[4], FIA_AFL.1[8], FIA_ATD.1, FIA_UAU. 1[1], FIA_UAU.7
FIA_UID.2[3] and FIA_USB.1 are realized.
<Automatic registration of the User ID>
In the case of the “External server authentication” has been selected as the user authentic
method, the identified and authenticated user is registered as a user ID with the user name and
authentication server information that was used with identification and authentication.
As described above, FIA_UID.2[7], FMT_MTD.1[10], FMT_SMF.1 and FMT_SMR.1[5] are
realized.
7.4.2. Auto Logoff Function in User Identification and Authentication Domain
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
100 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
While the user who is identified and authenticated is accessing from a panel, if it does not
accept any operations for more than the "panel automatic logoff time", it logs off from a user
identification and authentication domain automatically.
As described above, FTA_SSL.3 is realized.
7.4.3. Modification Function of User Password
When the identification and authentication are succeeded, and the access to the user
identification and authentication domain is permitted, the user is permitted to change its own
password. When the external server authentication is effective, this function cannot be applied.
The user password is changed when it is re-authenticated that the user is a user and the newly
setup password satisfies the quality.
The user authentication mechanism which authenticates the user by the user password
z
consisting of the characters shown in Table 12 shall be usable.
z
When authentication has succeeded, the authentication failure frequency is reset.
z
When re-authentication is performed, in the case of access from the panel, “*” is returned to
the entry of the user password for each character as feedback.
When authentication failure which results in the first, second, or third time is detected by
z
each authentication function utilizing the user password of a user, all the authentication
functions utilizing the user password of the user are locked out. (Log-in by the user is denied.
Change operation of the user password is denied.)
¾ The maximum number of times of failure frequency is specified by the administrator by the
unauthorized access detection threshold setup function.
z
The lock-out state of the authentication function is released when the F.ADMIN’s unlock
function to the user is performed.
z
When the user password newly set satisfies the following qualities, it is changed.
¾ It is composed of the characters and by the number of digits, shown in the Table 12.
¾ It shall not be composed of one kind of character.
¾ This password is not equal to the currently setup password.
As described above, FIA_AFL.1[4], FIA_SOS.1[3], FIA_UAU.6, FIA_UAU.7, FMT_MTD.1[2],
FMT_SMF.1, and FMT_SMR.1[3] are realized.
7.5. F.BOX (User Box Function)
F.BOX permits a user who was identified and authenticated as a permitted user to operate and
manage his/her personal user box. When the account authentication is used, F.BOX permits the
user to operate and manage the group box associated with the account to which the user belongs.
F.BOX is a series of security function such as the access control function authenticating that the
user is permitted to use the public user box when he/she tries to access that box and permitting
various operations of the public user box and the user box files after the authentication succeeds.
<Registration of user box by user operation>
To register a personal user box, a group user box or public user box by selecting the user
attribute to the non-registration user box ID selected. When it's registered, it is possible to select
"User ID" or "Account ID" in the user attribute of the user box which have been specified "Public"
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
101 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
as a default value.
z In the case of the personal user box, the arbitrary user ID registered is specified.
z In the case of the public user box, verify that a user box password registered satisfies the
following conditions.
¾ It is composed of the characters and by the number of digits, shown in the Table 12.
¾ It shall not be composed of one kind of character.
z In the case of group user box, the arbitrary account ID registered is specified.
As described above, FIA_SOS.1[1], FMT_MSA.3[1], FMT_MTD.1[5], FMT_SMF.1 and
FMT_SMR.1[3] are realized.
<Automatic registration of user box>
z In the user box operation to store of the copy job and the print job, when the specified user box
is unregistered, the personal user box which is set the user ID of the user who operates the
job concerned is automatically registered.
As described above, FMT_MSA.3[1] and FMT_SMF.1 are realized.
<Registration of user box file>
In the new registration operation, move or copy operation of user box file, the user box ID
z
equivalent to the user box specified as target storage is set to the user box attribute as the
user box file.
As described above, FMT_MSA.3[3] is realized.
7.5.1. Personal User Box Function
7.5.1.1. Access Control Function to Personal User Box
The task to act for the identified and authenticated user has "User ID" of the user who is
identified and authenticated for the user attribute. This task is permitted the display of the list
of the personal user box which has a corresponding user attribute with this user attribute.
As described above, FIA_ATD.1, FIA_USB.1, FDP_ACC.1[1] and FDP_ACF.1[1] are realized.
7.5.1.2. Access Control Function to User Box File in Personal User Box
When the user box to operate is selected, "User Box ID" of the user box is associated with the
task as a user box attribute in addition to the user attribute. This task is permitted, to the user
box file with the user box attribute corresponding to the user box attribute of itself, the printing,
the E-mail transmission (include the S/MIME transmission), the FTP transmission, the FAX
transmission, the SMB transmission, WebDAV transmission, download, the removing to other
user boxes, the copy operations to other user boxes, and the copy operations to an external
memory.
As described above, FIA_ATD.1, FIA_USB.1, FDP_ACC.1[1] and FDP_ACF.1[1] are realized.
7.5.1.3. User Attribute Change of Personal User Box
The user attributes can be changed.
z
If another registered user is specified, it becomes a personal user box that another user
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
102 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
manages.
If public is specified, it becomes a public user box. It is necessary to register the user box
z
password. In this case, it is verified that the user box password meets the following
requirements.
¾ It is composed of the characters and by the number of digits shown in Table 12.
¾ It shall not be composed of one kind of character.
If account ID is specified, it becomes a group user box that can be accessed by a user who is
z
permitted the use of the concerned account.
As described above, FIA_SOS.1[1], FMT_MSA1.[1], FMT_SMF.1 and FMT_SMR.1[3] are
realized.
7.5.2. Public User Box Function
When the user is identified and authenticated as a permitted user, the task to act for the user
who is identified and authenticated has "User ID" of the identified and authenticated user as the
user attribute. This task is permitted the display of the list of the public user box which is set the
public as the user attribute. The operation specification of each public user box is as follows.
(As described above, FIA_ATD.1, FIA_USB.1, FDP_ACC.1[1] and FDP_ACF.1[1] are realized.)
7.5.2.1. Authentication Function in Access to Public User Box
For the access request for each public user box, after the above-mentioned verification function
is operated, the user who accesses is authenticated that it is a user permitted the use of a user
box concerned respectively.
Provides the user box authentication mechanism that is authenticated by the user box
z
password that consists of the character shown in Table 12.
After the user box is authenticated to the access from the network, it provides the user box
z
authentication mechanism using the session information besides the user box password.
¾
According to protocol, it utilizes the 1010 session information or more, or generated and
uses the 1010 session information or more.
Return "*" for each character as feedback for the entered user box password.
z
Resets the number of authentication failure when succeeding in the authentication.
z
¾
In case of the access from the panel, when it fails in the authentication, an input from the
panel is not accepted for five seconds.
When the authentication failure that becomes the 1-3 times in total is detected for the
z
public user box concerned, the authentication function to the public user box concerned is
locked.
¾
The administrator specifies the failure frequency threshold by the unauthorized access
detection threshold setting function.
z
The lock of the authentication function is released by the lock release function to the public
user box of F.ADMIN executed.
As described above, FIA_AFL.1[6], FIA_AFL.1[8], FIA_SOS.1[5], FIA_SOS.2, FIA_UAU.2[4],
FDP_UAU.7 and FIA_UID.2[5] are realized.
The following is a function that the user who is permitted the use of the user box is provided in
the user box identification and authentication domain of the user box.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
103 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
7.5.2.2. Access Control to User Box File in Public User Box
The task to act for the user is related the "User Box ID" of the user box as a user box attribute
in addition to the user attribute. This task is permitted the user box file, which have a
corresponding user box attribute to the user box attribute of the subject attribute, to do the
printing, the E-mail transmission (include the S/MIME transmission), the FTP transmission, the
fax transmission, the SMB transmission, WebDAV transmission, download, the movement to
other user boxes, the copy operations to other user boxes, and the copy operations to an external
memory.
As described above, FIA_ATD.1, FIA_USB.1, FDP_ACC.1[1] and FDP_ACF.1[1] are realized.
7.5.2.3. User attribute change of Public User Box
The user attribute of the user box can be changed.
z
Specify the registered user. And change to a personal user box for the registered user.
z
Specify the account ID, and then it becomes a group user box that can be accessed by a user
who is permitted the use of the concerned account.
As described above, FMT_MSA.1[2], FMT_SMF.1 and FMT_SMR.1[4] are realized.
7.5.2.4. Change of Public User Box Password
The user box password of the public user box is changed. This is performed when it is
re-authenticated that the user has a permission to use the public user box and the box password
newly set satisfies the following quality:
z
The user box authentication mechanism which authenticates the user by user box password
z
When re-authentication has succeeded, the authentication failure frequency is reset.
z
When re-authentication is performed, in the case of access from the panel, “*” is returned to
consisting of the characters shown in Table 12 shall be usable.
the entry of the user box password for each character as feedback.
When authentication failure which results in the first, second, or third time in total is
z
detected by each authentication function utilizing a user box password to the public user
box, all the authentication functions utilizing the user box password of that public user box
is locked out. (Access to the public user box is denied. Operations to change the user box
password of the public user box are denied.)
¾
The maximum number of times of failure frequency is specified by the administrator by
the unauthorized access detection threshold setup function.
The lock-out of the authentication function is released when the F.ADMIN’s unlock function
z
is performed to the public user box.
Password is changed when the user box password which is newly set up satisfies the quality
z
below:
¾
It is composed of the characters and by the number of digits shown in Table 12.
¾
It shall not be composed of one kind of character.
¾
This password is not equal to the currently setup password.
As described above, FIA_AFL.1[6], FIA_SOS.1[1], FIA_UAU.6, FIA_UAU.7, FMT_MTD.1[4],
FMT_SMF.1, and FMT_SMR.1[4] are realized.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
104 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
7.5.3. Group User Box Function
7.5.3.1. Access Control Function for Group User Box
The task to act for the identified and authenticated user has the “Account ID" as the Account
Name that is associated with the identified and authenticated user. This task is permitted the
display of the list of the group user box which has a corresponding user attribute with this
account ID.
As described above, FIA_ATD.1, FIA_USB.1, FDP_ACC.1[1] and FDP_ACF.1[1] are realized.
7.5.3.2. Access Control Function to User Box File in Group User Box
When the user box to operate is selected, "User Box ID" of the user box is associated with the
task as a user box attribute in addition to the user attribute. This task is permitted, to the user
box file with the user box attribute corresponding to the user box attribute of subject attribute,
the printing, the E-mail transmission (include the S/MIME transmission), the FTP transmission,
the FAX transmission, the SMB transmission, WebDAV transmission, download, the removing
to other user boxes, the copy operations to other user boxes, and the copy operations to an
external memory.
As described above, FIA_ATD.1, FIA_USB.1, FDP_ACC.1[1] and FDP_ACF.1[1] are realized.
7.5.3.3. User Attribute Change of Group User Box
The user attributes can be changed.
If another account ID is specified, the user of another Account Name becomes an accessible
z
group user box.
If public is specified, it becomes a public user box. It is necessary to register the user box
z
password. In this case, it is verified that the user box password satisfies the following
requirements.
¾
¾
z
It is composed of the characters and by the number of digits shown in Table 12.
It shall not be composed of one kind of character.
Specify a registered user, and change to a personal user box for the registered user.
As described above, FIA_SOS.1[1], FMT_MSA.1[3], FMT_SMF.1 and FMT_SMR.1[6] are
realized.
7.6. F.PRINT (Secure Print Function, ID & Print Function)
F.PRINT is a security function related to the secure print function and ID & print function.
It provides the access control function that allows the printing and displaying the list of the
secure print file after authenticating if a user is the authorized person to use the secure print file
for the access to the secure print file from the panel to the identified and authenticated user.
Moreover, for the user who was identified and authenticated as a permitted user, when ID &
print files are accessed from the panel, F.PRINT provides the access control function that allows
the printing and displaying the list of only the ones stored by the user.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
105 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
7.6.1. Secure Print Function
7.6.1.1. Authentication Function by Secure Print Password
When the user is identified and authenticated as the permitted user, it authenticates that the
accessing user is a user to whom the use of the secure print file concerned is permitted, in
response to the access request to each secure print file.
Provides the secure print password authentication mechanism that is authenticated by the
z
secure print password that consists of the character shown in Table 12.
The secure print authentication mechanism by the separate session information is not
z
needed because it becomes only an access from the panel in the case of the secure print.
Return "*" for each character as feedback for the entered secure print password.
z
z
Resets the number of authentication failure when succeeding in the authentication.
z
The access from the panel is not accepted for 5 seconds when the authentication is failed.
z
When the authentication failure that becomes the 1-3 times in total for the secure print file
concerned is detected, the authentication function to the secure print file is locked.
¾
The administrator specifies the failure frequency threshold by the unauthorized access
detection threshold setting function.
The lock is released by the lock release function to the secure print file of F.ADMIN
z
executed.
As
described
above,
FIA_AFL.1[5],
FIA_AFL.1[8],
FIA_UAU.2[3],
FIA_UAU.7
and
FIA_UID.2[4] are realized.
7.6.1.2. Access Control Function to Secure Print File
The secure print file access control operates when it is authenticated.
The task to act for the user who is identified and authenticated has the authenticated
z
secure print internal control ID as the file attribute.
This task is permitted the printing to the secure print file with a corresponding file
z
attribute to the file attribute of this task.
As described above, FIA_ATD.1, FIA_USB.1, FDP_ACC.1[2] and FDP_ACF.1[2] are realized.
7.6.1.3. Registration Function of Secure Print File
When it is authenticated as a permitted user in the store request of the secure print file, the
user is permitted to register the secure print password with the concerned secure print file.
Registration of the secure print password
z
The registered secure print password is verified to meet the following requirements.
z
¾
It is composed of the characters and by the number of digits shown in Table 12.
¾
It shall not be composed of one kind of character.
Giving of the secure print internal control ID
When the verification of the secure print password is completed in a store request of the
secure print file, the secure print internal control ID uniquely identified is set to the
concerned secure print file.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
106 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
As described above, FMT_SOS.1[1], FMT_MSA.3[2], FMT_MTD.1[8], FMT_SMF.1 and
FMT_SMR.1[3] are realized.
7.6.2. ID & print Function
7.6.2.1. ID & Print File Registration Function
When it is requested to store an ID & print file, if the user is authenticated as a registered
user, that file is stored.
z
The user ID of the user who tries to store the file is set as a user attribute of that ID & print
file.
As described above, FIA_MSA.3[4] is realized,
7.6.2.2. ID & Print File Access Control Function
When the user is authenticated as a registered user, the ID & print file access control
operates.
z
The task substituting for the identified and authenticated user has a user ID as a user
attribute.
z
This task is allowed to list and print ID & print files with the user attribute which is equal
to this user attribute.
As described above, FIA_ATD.1, FIA_USB.1, FDP_ACC.1[4], and FDP_ACF.1[4] are realized,
7.7. F.OVERWRITE-ALL (All Area Overwrite Deletion Function)
F.OVERWRITE-ALL executes the overwrite deletion in the data area of HDD, and initializes
the settings such as passwords on NVRAM as well. The object for the deletion or the
initialization is as follows.
<Object for the deletion : HDD>
z Secure print file
z User box file
z ID & print file
z On-memory image file
z Stored image file
z HDD remaining image file
z Image related file
z Transmission address data file
z User ID
z User password
z User box password
z Secure print password
z Account ID
z Account password
z S/MIME certificate
z SSL certificate
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
107 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
<Object for the initialization : NVRAM>
z Administrator Password
z SNMP password
z WebDAV server password
z Encryption passphrase
--- Encryption Passphrase is deleted, and the
operational setup of HDD encryption function
becomes OFF.
The deletion methods such as the data overwritten in HDD and the writing frequency is
executed according to the deletion method of the overall area overwrite deletion function set by
F.ADMIN (Table 13). For the HDD encryption function, the encryption passphrase which was set
is disabled by turning off the operational setup. The setup of the Enhanced Security function
becomes invalid in the execution of this function. (Refer to the description for the operational
setup of the Enhanced Security function in F.ADMIN.)
As described above, FAD_RIP.1 is realized.
Table 13 Types and Methods of Overwrite Deletion of Overall Area
Method
Mode:1
Mode:2
Mode:3
Mode:4
Mode:5
Mode:6
Mode:7
Mode:8
Overwritten data type and their order
0x00
Random numbers Æ Random numbers Æ 0x00
0x00 Æ 0xFF Æ Random numbers Æ Verification
Random numbers Æ 0x00 Æ 0xFF
0x00 Æ 0xFF Æ 0x00 Æ 0xFF
0x00 Æ 0xFF Æ 0x00 Æ 0xFF Æ 0x00 Æ 0xFF Æ Random numbers
0x00 Æ 0xFF Æ 0x00 Æ 0xFF Æ 0x00 Æ 0xFF Æ 0xAA
0x00 Æ 0xFF Æ 0x00 Æ 0xFF Æ 0x00 Æ 0xFF Æ 0xAA Æ Verification
7.8. F.CRYPT (Encryption Key Generation Function)
F.CRYPT generates an encryption key to encrypt all data written in HDD by using the Konica
Minolta HDD encryption key generation algorithm that is regulated by the Konica Minolta
encryption specification standard.
When the encryption passphrase is decided in the HDD encryption functional operation
setting to which the access is restricted in F.ADMIN, an encryption key 128 bits long is
generated from the encryption passphrase by applying the Konica Minolta HDD encryption key
generation algorithm.
As described above, FCS_CKM.1 is realized.
7.9. F.RESET (Authentication Failure Frequency Reset Function)
F.RESET is a function that releases the lock by resetting the authentication failure frequency
when the account locks in the administrator authentication and CE authentication.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
108 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
(1) CE Authentication function lock release processing function
The function is executed by the specific operation, and the lock is released by clearing the
failure frequency of the CE authentication to 0 after CE authentication lock time.
As described above, FIA_AFL.1[1] is realized.
(2) Administrator authentication function lock release processing function
The function is executed by OFF/ON of the main power supply, and the lock is released by
clearing the failure frequency of the administrator authentication to 0 after the administrator
authentication lock time.
As described above, FIA_AFL.1[2] is realized.
7.10. F.TRUSTED-PASS (Trust Channel Function)
F.TRUSTED-PASS is a function that generates and achieves the Trusted Channel by using
SSL or TSL protocol when transmitting and receiving the following image file between client PC
and MFP.
z
User box file (download from MFP to client PC)
z
Image file that will be stored as a user box file (upload from client PC to MFP)
z
Image file that will be stored as Secure Print file (upload from client PC to MFP)
z
Image file that will be stored as an ID & print file (upload from client PC to MFP)
As described above, FTP_ITC.1 is realized.
7.11. F.S/MIME (S/MIME Encryption Processing Function)
F.S/MIME is a function to encrypt the User box file when transmitting the User box file as
S/MIME.
<User box file Encryption Key generation>
z
The Encryption key is generated to encrypt the user box file by the pseudorandom number
Generation Algorithm which FIPS 186-2 provides. (Encryption key length is 128, 168, 192 or 256
bits.)
As described above, FCS_CKM.1 is realized.
<Encryption of User box file >
z
It is encrypted by AES which FIPS PUB 197 provides by using encryption key (128, 168 and 256
z
It is encrypted by the 3-Key-Triple-DES which SP800-67 provides by using the encryption key (168
bits) to encrypt the user box file.
bits) to encrypt the user box file.
As described above, FCS_COP.1 is realized.
<Encryption of User box file Encryption key>
z
The encryption key to encrypt the user box file is encrypted by RSA which FIPS 186-2 provides.
z
The key length of the encryption key used in this case is 1024, 2048, 3072 or 4096 bits.
As described above, FCS_COP.1 is realized.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
109 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
7.12. F.FAX-CONTROL (FAX Unit Control Function)
F.FAX-CONTROL is the function that prohibits an access to internal network connected to
MFP by TOE control.
TOE controls the function that transfer the data received from public line to internal LAN.
The prohibition of access (data forwarding except image data) from public line to internal
network is realized by TOE control.
As described above, FDP_IFC.1 and FDP_IFF.1 are realized.
7.13. F.SUPPORT-AUTH (External Server Authentication Operation Support Function)
F.SUPPORT-AUTH is the function that realizes the user authentication function in
cooperation with the user information management server of Active Directory. (the function that
operates with F.USER.)
When the user information management server is used for user identification method, the
inquiry for the identification of the user is done for the user information management server
under the user's request of the identification and authentication process. After this inquiry, the
user identification and authentication process is realized by getting the user identification
information returned back from user information management server.
As described above, FCS_CAP.1[1] is realized.
7.14. F.SUPPORT-CRYPTO (ASIC Support Function)
F.SUPPORT-CRYPTO is the function that operates the HDD encryption function that utilizes
ASIC from TOE.
For all data written in HDD, an encryption key generated by F.CRYPTO is set in ASIC, and
encryption is performed by the ASIC. On the other hand, for the encrypted data read out of the
HDD, the encryption key generated by F.CRYPTO is set in ASIC in the same manner as above,
and decryption is performed by the ASIC.
As described above, FCS_CAP.1[2] is realized.
7.15. F.ADMIN-WebDAV (Administrator Function (Counter Management Function))
F.ADMIN-WebDAV is the security function that identifies and authenticates administrator
when accessed via a network from a client PC using WebDAV, and permits only the
administrator who was identified and authenticated successfully to operate the counter
management function. (The counter management function includes TSF data. This is described
in detail below.)
7.15.1. Identification and Authentication Function by WebDAV Server Password
It is identified and authenticated by the WebDAV server password that a user accessing via a
network using WebDAV is an administrator.
The WebDAV authentication mechanism which authenticates the user by the WebDAV
z
server password consisting of the characters shown in Table 12 shall be usable.
¾
For WebDAV, no separate mechanism to authenticate the administrator based on the
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
110 / 111
+
+
+
bizhub C360 / bizhubC280 / bushub C220 / bizhub C7728 / bizhub C7722 / ineo 360 / ineo 280 / ineo 220 / VarioLink 3622c
/ VarioLink 2822c / VarioLink 2222c Control Software A0ED0Y0-0100-GM0-22
Security Target
session information, but a WebDAV server password is used for each session.
z
When re-authentication has succeeded, the authentication failure frequency is reset.
z
When authentication failure which results in the second, fourth, and sixth time in total is
detected by each authentication function utilizing a WebDAV server password, all the
authentication functions utilizing the WebDAV server password is locked out. (Access using
WebDAV is denied.)
The maximum number of times of failure is specified by the administrator by the
¾
unauthorized access detection threshold setup function.
z
The lock-out of the authentication function is released when the F.ADMIN’s unlock function
is performed to WebDAV authentication.
As described above, FIA_AFL.1[9], FIA_UAU.2[2], and FIA_UID.2[2] are realized.
7.15.2. Management Function Utilizing WebDAV
When it is identified and authenticated that the user is an administrator by the WebDAV
server password, access utilizing WebDAV is permitted, and it is permitted to set up the data
below:
7.15.2.1. Obtention of User Password
User password is obtained for each registered user.
As described above, FMT_MTD.1[7], FMT_SMF.1, and FMT_SMR.1[2] are realized.
7.15.2.2. Obtention of Account Password
Account password is obtained for each registered user.
As described above, FMT_MTD.1[7], FMT_SMF.1, and FMT_SMR.1[2] are realized.
Copyright(c) 2009-2010 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved.
111 / 111
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement