Daewoo | DVR-S06 | User manual | Daewoo DVR-S06 User manual

DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` A
mac001
1200DPI 90LPI
DVD Recorder + VCR
DVR-S06
User Manual
P/N : 97P95600N0-G5
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` i
mac001
1200DPI 90LPI
Important Safeguards
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
‘dangerous voltage‘ within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and servicing instructions in
the literature accompanying the appliance.
WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
WARNING:
Do not install this equipment in a confined space such as a bookcase or
similar unit.
NOTE TO CABLE/TV INSTALLER:
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1
CLASSE 1
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
PRODUIT LASER
This reminder is provided to call the cable TV system installer’s attention to
Article 820-40 of the National Electric Code (U.S.A.). The code provides
guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of the cable entry as
practical.
CAUTION:
This DVD Recorder+VCR employs a Laser System. To ensure proper use of this product, please read this
owner’s manual carefully and retain for future reference. Should the DVD Recorder+VCR require maintenance,
contact an authorized service center. Use of controls, adjustments, or the performance of procedures other than
those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do
not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION:
The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as
vases, should be placed on the apparatus.
FCC WARNING:
This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are expressly approved in the instruction manual. The user
could lose the authority to operate this equipment if an unauthorized change or modification is made.
i
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` ii
mac001
1200DPI 90LPI
Important Safeguards
This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the product is operated in a residential installation. This product generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this product does cause harmful interference to radio or television reception, which can
be determined by turning the product off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the product and receiver.
- Connect the product into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC COMPLIANCE:
The responsible party for this product’s compliance is: GoVideo, 7835 East McClain Drive, Scottsdale, AZ
85260, USA.
SERIAL NUMBER:
The serial number is found on the back of the DVD Recorder+VCR. This number is for this unit only. You should
record requested information here and retain this guide as a permanent record of your purchase.
Model No. ___________________________________
Serial No. ___________________________________
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S
MANUAL AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE
REFERENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in
electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the
following procedures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1
Read these instructions.
3
All these safety and operating instructions
should be read before the product is operated.
2
Keep these instructions.
The safety, operating and use instructions should
be retained for future reference.
Heed all warnings.
All warnings on the product and in the operating
instructions should be adhered to.
4
Follow all instructions.
All operating and use instructions should be
followed.
ii
Downloaded From Disc-Player.com Daewoo Manuals
INTRODUCTION
REGULATORY INFORMATION: FCC Part 15
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` iii
mac001
1200DPI 90LPI
Important Safeguards
5
6
Do not use this product near water.
13 Unplug this product during lightning storms or
For example: near a bath tub, wash bowl, kitchen
sink, laundry tub, in a wet basement; or near a
swimming pool; and other areas located near
water.
14 Refer all servicing to qualified service personnel.
Clean only with dry cloth.
Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners.
7
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from overheating.
The openings should never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
manufacturer’s instructions have been adhered
to.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatuses (including amplifiers) that produce
heat.
9 Make sure that rating of your household
electricity supply matches that shown on the
back of your product.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the product.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
apparatus. When a cart is used,
use caution when moving the
cart/ product combination to avoid injury from
tip-over.
iii
Downloaded From Disc-Player.com Daewoo Manuals
when unused for long periods of time.
Servicing is required when the product has been
damaged in any way, such as: Power-supply cord
or plug is damaged; liquid has been spilled or
objects have fallen into the product; the product
has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15 Do not connect the product to the power supply
if you have just moved it from a cold environment
to a warm room. This can lead to condensation
inside the product, which can damage it. Wait
for approximately 2 hrs for it to reach room
temperature.
16 Make sure the product is placed at least 4 inches
(10 cm) apart from other home appliances or
obstacles to ensure sufficient ventilation.
17 This product is designed to work continuously.
Switching if off does not disconnect if from the
power outlet. To disconnect if from the power
outlet you have to unplug it.
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 1
mac001
1200DPI 90LPI
Table of Contents
RECORDING
Important Safeguards _________________________i
Table of Contents ______________________________1
Overview ______________________________________2
Identification of Controls_______________________6
Basic Recording________________________________39
CONNECTIONS
Connecting Antenna/Cable ____________________11
Connecting a TV _______________________________12
Connecting an Amplifier/Receiver _____________13
Connecting Optional Equipment ______________14
Connecting a Digital Camcorder ______________14
SETUP
Initial Installation ______________________________15
Initial Setup____________________________________17
Setup Menu Overview
INSTALLATION Settings
RECORDING OPTIONS Settings
LANGUAGE Settings
PREFERENCE / Video Settings
PREFERENCE / Audio Settings
PREFERENCE / Parental Controls
Various PREFERENCE Settings
System Information
Restore Defaults
17
17
20
21
22
23
24
26
27
27
On-Screen Display Overview __________________28
Recording from TV
One Touch Record (OTR)
Checking the Recording Time
To Pause the Recording
One Touch Copy - DVD to VHS
Copy Edit (DVD ➝ VCR)
One Touch Copy - VHS to DVD
Copy Edit (VCR ➝ DVD)
39
40
40
40
41
41
42
42
Timer Recording _______________________________43
Recording from an External Input _____________45
DISC OPERATION
Disc Initialize __________________________________47
Disc Operation in DVD+RW disc _______________47
Disc Operation in DVD+R disc _________________49
DISC EDIT
Title Menu _____________________________________50
REFERENCE
Troubleshooting _______________________________53
Technical Specifications ________________________56
PLAYBACK
DVD Playback _________________________________31
VCR Playback _________________________________35
Other Disc Playback __________________________37
1
Downloaded From Disc-Player.com Daewoo Manuals
INTRODUCTION
INTRODUCTION
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 2
mac001
1200DPI 90LPI
Overview
DVD, DVD+R, DVD+RW?
What is a DVD?
DVD (Digital Versatile Disc) is a storage medium that combines the convenience of the compact disc with the
latest digital video technology. DVD video uses modern MPEG2 data compression technology that enables an
entire feature film to be stored on a single five inch disc.
How good is the resolution of DVD compared with VHS?
The razor-sharp digital images have more than 500 lines of resolution at 720 pixels per line. This is more than
twice as high as VHS and even better than laser disc quality. DVD picture quality is easily comparable to the
digital masters produced in recording studios.
What is a DVD+RW?
DVD+ReWritable uses ‘phase change‘ media, the same technology on which rewritable CDs are based. A highperformance laser is used to change the reflective properties of the recording layer; this process can be
repeated more than a thousand times.
What is a DVD+R?
Unlike a DVD+RW disc, a DVD+R (write-once DVD) can only be written to once. If it is not finalized after a
recording, further recordings can be added to it. Old recordings can be deleted but they can no longer be
overwritten. The deleted recordings (titles) are marked 'deleted title'.
Before a DVD+R can be played in a DVD player, it must be finalized in the DVD Recorder+VCR. Once this
process is complete, no further recordings can be added.
What can I do with my DVD Recorder+VCR?
Your DVD Recorder+VCR is a machine for recording and playing back digital video discs with ‘two-way‘
compatibility with the universal DVD video standard. This means:
• existing DVD video discs can be played on the recorder.
• recordings made on your DVD Recorder+VCR can be played on other DVD video players and DVD-ROM
drives.
Dual Media
Supporting Disc
Recording Format
Finalize
After finalize other DVD playback
Consumer
Remark :
±RW / ±R
±Disc + VR format
-RW, -R, +R
All disc can playback
Does not need selection (recording format)
A DVD Recorder that supports ‘dual media’ recording allows DVD+RW format recording (+VR) on either DVD-R,
DVD-RW, DVD+R or DVD+RW media. Any editing feature that is available with the +RW logical format is
available on any of the media types. This system allows the flexibility for the consumer to use any of the above
media formats for recording in the same system. Since the +VR format is DVD-Video compatible, the consumer
can take any disk recorded on this platform and should be capable of playing it back on the majority of DVD
players on the market.
2
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 3
mac001
1200DPI 90LPI
Overview
INTRODUCTION
Regional code
1
ALL
If the region number on your DVD disc does not correspond to the region
number of this player, the disc cannot be played.
Which discs you can use
The following discs can be used in your DVD Recorder+VCR:
Playback and recording
DVD+RW (Digital Versatile Disc + ReWritable)
DVD-RW (DVD-Rerecordable)
DVD+R (Digital Versatile Disc + Write-Once)
DVD-R (DVD-Recordable)
Playback only
DVD Video (Digital Versatile Disc)
Audio CD (Compact Disc Digital Audio)
CD-R (CD recordable) Audio/ CD-RW (CD rewritable) Audio
Video Format : DVD / JPEG
Audio Format : CDDA / MP3 / MP3 Pro
Not all recordable CDs may be played by your player.
Disc-related Terms
Title (DVD only)
The main film, accompanying feature content, or music album. Each title is assigned a title reference number
enabling you to locate it easily.
Chapter (DVD only)
Sections of a movie or a musical piece that are smaller than titles. A title is composed of one or several
chapters. Each chapter is assigned a number to enable you to easily locate the chapter you want. Depending on
the disc, chapters may not be labeled.
Track (Audio CD only)
Sections of a movie or a musical piece on an audio CD. Each track is assigned a number, enabling you to easily
locate the track you want.
3
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 4
mac001
1200DPI 90LPI
Overview
About DVD Recording
Notes on Recording
• The recording times shown are not exact because the DVD Recorder+VCR uses variable bit-rate video
compression. This means that the exact recording time will depend on the material being recorded.
• When recording a TV broadcast, if the reception is poor or the picture contains interference, the recording
times may be shorter.
• Discs recorded at high speeds (equal to or greater than 2X) may not be recognized.
• If you record still pictures or audio only, the recording time may be longer.
• The displayed times for recording and time remaining may not always add up to the exact length of the
disc.
• The available recording time may decrease if you heavily edit a disc.
• When using a DVD+R disc, you can keep recording until the disc is full, or until you finalize the disc. Before
you start a recording session, check the amount of recording time left on the disc.
Recording TV Audio Channels
The DVD Recorder+VCR can record one or two channel audio. For TV broadcasts, this usually means mono or
stereo, but some programs are broadcast with a main and a SAP (Secondary Audio Program) audio channel.
You can record either the main audio or the SAP audio.
Restrictions on Video Recording
• You cannot record copy-protected video using this DVD Recorder+VCR. Copy-protected video includes DVDVideo discs and some satellite broadcasts. If copy-protected material is encountered during a recording,
recording will pause or stop automatically and an error message will be displayed on-screen.
• Video that is ‘copy-once only’ can only be recorded using DVD+RW discs with CPRM.
Copyright Notice
• Audio and video recordings you make using the DVD Recorder+VCR are for your personal use only. You may
not sell, lend, or rent them to other people.
• This product incorporates copyright protection technology that is protected by method claims of certain
U.S.patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
corporation. Reverse engineering or disassembly is prohibited.
Precautions
Handling the Unit
When shipping the unit
The original shipping carton and packing materials come in handy. For maximum protection, re-pack the
unit as it was originally packaged at the factory.
When setting up the unit
The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position
the unit away from the TV, VCR, or radio, or turn off the unit after removing the disc.
To keep the surface clean
Do not use volatile liquids, such as insecticide spray, near the unit. Do not leave rubber or plastic products
in contact with the unit for a long period of time. They will leave marks on the surface.
4
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 5
mac001
1200DPI 90LPI
Overview
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild
detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage
the surface of the unit.
To obtain a clear picture
The DVD Recorder+VCR is a high-tech, precision device. If the optical pick-up lens and disc drive parts are
dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after
every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your
nearest dealer.
Remote Control Operation Range
Point the remote control at the remote sensor and press the buttons.
Distance: Within 23 ft (7 m) of the remote sensor.
Angle: Within 30° in each direction of the remote sensor.
Remote Control Battery Installation
AAA
AAA
Detach the battery cover on the rear of the remote control, and insert two AAA
batteries. Make sure the polarities (+ and -) are aligned correctly.
Caution
Do not mix old and new batteries. Never mix different types of batteries (standard,
alkaline, etc.).
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the disc by the edges
so that fingerprints will not get on the surface. Do not stick paper or
tape on the disc.
Storing Discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct
sunlight, as there may be a considerable temperature increase inside the car.
Cleaning Discs
Fingerprints and dust on the disc can cause poor picture quality and
sound distortion. Before playing, clean the disc with a clean cloth.
Wipe the disc from the center outward.
Do not use strong solvents such as alcohol, benzine, thinner,
commercially available cleaners, or anti-static spray intended for older
vinyl records.
Yes
No
About Symbols
About the
Symbol
‘ ‘ may appear on the TV screen during operation. This icon means the function explained in this User's Guide
is not available on that specific disc.
5
Downloaded From Disc-Player.com Daewoo Manuals
INTRODUCTION
Cleaning the Unit
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 6
mac001
1200DPI 90LPI
Identification of Controls
Front Panel
!
$
%
@
^ *
& (
#
)
! POWER (STANDBY/ON)
Turns the DVD Recorder+VCR on and off.
@ Cassette Compartment (VCR deck)
Insert a video cassette here.
# Disc Tray (DVD deck)
Insert a disc here.
$ VCR EJECT
Ejects the tape in the VCR deck.
% REC
Starts recording. Press repeatedly to set the
recording time.
^ STOP
Stops playback.
& PLAY/PAUSE
Starts playback of a disc or tape. Pauses playback
or recording temporarily.
* REW
DVD: Skips to previous chapter.
VCR: Rewinds the tape during Stop mode. Press
during Play mode for fast reverse picture search.
( FF
DVD: Skips to next chapter.
VCR: Advances the tape during Stop mode. Press
during Play mode for fast forward picture search.
6
Downloaded From Disc-Player.com Daewoo Manuals
1 23
4
5
6
) Front Panel Display
Shows the current status of the DVD
Recorder+VCR.
1 COPY
Copies from DVD to VCR (or from VCR to DVD).
2 CH+/–
Scans up or down through memorized channels.
Also moves up and down in DVD navigation
menus.
3 SELECT DVD/VCR
Toggles control between the DVD deck and the
VCR deck.
4 OPEN/CLOSE
Opens or closes the disc tray.
5 LINE1 (VIDEO, L-AUDIO-R)
Connects to the audio/video output of an external
source (VCR, Camcorder, etc.).
6 DV IN
Connects to the DV output of an external source
(VCR, Camcorder, etc.).
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 7
mac001
1200DPI 90LPI
Identification of Controls
INTRODUCTION
Front Panel Display
Channel
TV Channel
C123
CATV Channel
Au-1
AV1 input
Au-2
AV2 input
DV
DV input
COPY
VCR to DVD copying
CH23
Input mode
Copy
COPY
DVD to VCR copying
Recording on disc
11:15
Indicates a DVD Timer recording is set.
11:15
Indicates a DVD Timer Recording is in
standby mode.
REC
Indicates the DVD is recording.
0:30
OTR Recording mode
RECP
Recording Pause mode
Recording on tape
11:15
Indicates a VCR Timer Recording is set.
11:15
Indicates a VCR Timer Recording is in
standby mode.
REC
Indicates the VCR is recording.
0:30
OTR Recording mode
RECP
Recording Pause mode
Others
SAFE
Indicates when the DVD Recorder+VCR is locked.
VCR
Indicates the DVD Recorder+VCR is in
VCR mode (set by [TV/VCR] button).
TV
I-S
Indicates when the DVD Recorder+
VCR is outputting the video signal in
Interlaced Scan mode.
P-S
Indicates the DVD Recorder+VCR is in
TV mode (set by [TV/VCR] button).
Indicates when the DVD Recorder+ VCR
is outputting the video signal in
Progressive Scan mode.
7
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 8
mac001
1200DPI 90LPI
Identification of Controls
Remote Control
Turns the DVD Recorder+VCR on and off.
- Opens and closes the disc tray in DVD mode.
- Ejects the tape in the VCR deck in VCR mode.
Selects VCR mode.
Selects DVD mode.
Switches the DVD Recorder+VCR input to TV tuner, Line 1, Line 2, or DV.
- Selects numbered options in menus.
- Selects TV channels.
- Manually adjusts tracking.
Resets the tape counter in VCR mode.
Accesses DVD disc menus.
Displays or exits the Setup menu.
- VCR: Commercial Skip skips forward 30 seconds.
Displays information about the currently loaded disc, VHS tape, or TV
channel.
- œ √…† : Selects menu options.
- CH(+/–) : Selects channels.
Confirms menu selections.
Selects a subtitle language, if available.
Selects an audio language (DVD), audio channel (CD) or audio type (TV).
Displays the edit menu for DVD+RW/+R discs or sets a chapter marker.
Enlarges the DVD video image.
- Starts playback.
- Pauses playback or recording temporarily. Press again to exit Pause mode.
- DVD: Searches backward/forward.
- VCR: Rewinds/advances during Stop mode. Press during Play mode for
fast reverse/forward picture search.
Stops playback or recording.
8
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 9
mac001
1200DPI 90LPI
Identification of Controls
INTRODUCTION
Skips to the next or previous chapter/track.
Starts recording. Press repeatedly to set the recording time. For more
details, Refer to One Touch Record (OTR) on page 40.
Selects Recording mode: - DVD ; Approx 1 Hour (HQ mode), 2 Hours (SP
mode), 4 Hours (EP mode), 8 Hours (SEP mode)
- VCR : SP or SLP.
Increases or decreases the slow motion speed when playing a DVD or VHS
tape.
Displays the finalize menu for DVD+R discs.
Displays the digest menu for DVD+RW/+R discs.
Displays a disc’s Title menu, if available.
Selects a DVD camera angle, if available.
Switches between the DVD Recorder+VCR tuner and your TV tuner.
Repeats the current chapter, track, title or the entire disc.
Repeats playback between two points (A and B).
Displays the Timer Recording menu.
9
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 10
mac001
1200DPI 90LPI
Identification of Controls
Rear panel
!
@
#
! AC Power Cord
Plug into a power outlet.
@ COMPONENT/PROGRESSIVE VIDEO OUT (Y Pb Pr)
Connect to a TV with Component Video (Y Pb Pr)
inputs.
# COAXIAL (Digital Audio Out)
Connect to an amplifier with a coaxial digital
audio input.
$ S-VIDEO OUT
Connect to a TV with an S-Video Input.
% RESET
Reset the DVD Recorder+VCR .
^&
$ %
*
(
^ AV OUT (VIDEO, L-AUDIO-R)
Connect to a TV with video and audio inputs. Or
connect to other equipment with audio inputs.
& LINE2 (VIDEO, L-AUDIO-R)
Connect to the audio/video outputs of an external
source (VCR, Camcorder, etc.).
* RF IN (FROM ANT.)
Connect to your antenna or cable TV outlet.
( RF OUT (TO TV)
Connect to a TV with an RF coaxial input.
Caution
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to
the DVD Recorder+VCR.
10
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 11
mac001
1200DPI 90LPI
Connections
• Make sure the DVD Recorder+VCR is connected directly to the TV, and the TV is set to the correct video input.
• Do not connect the DVD Recorder+VCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.
• Do not connect the DVD Recorder+VCR via your VCR. The DVD image could be distorted by the copy protection
system.
Connecting Antenna/Cable
1
Disconnect the antenna/cable from the rear of your
TV.
2
Connect this cable to the jack marked RF IN (FROM
ANT.) on the rear panel of the DVD Recorder+VCR.
Antenna
Antenna
Cable TV
Wall Jack
Flat Wire
(300 ohm)
300/75 ohm
Adaptor
(Not supplied)
OR
OR
DVD & VCR OUT
ANT. IN
IN
OUT
R
COMPONENT OUT
Pr
Pb
COAXIAL
Y
AUDIO
S-VIDEO
OUT
RESET
L
IGITAL
D
VIDEO
AUDIO OUT
RF OUT
Cable Service Without Cable Box
Rear of DVD Recorder+VCR
If your cable wire is connected to your TV without a
converter or descrambler box, unscrew the wire from your TV and attach it to the RF IN (FROM ANT.) jack on the
rear panel of the DVD Recorder+VCR.
Use the supplied coaxial cable to connect between the DVD Recorder+VCR’s OUT (TO TV) jack and the antenna
input jack on your TV. With this connection, you can receive all midband, superband, and hyperband channels
(all cable channels).
Cable Service With Cable Box
Cable TV
Wall Jack
If a cable box is required in your cable system, follow
the instructions shown at right. This hookup permits
both TV and DVD Recorder+VCR operation.
Back Panel of
Typical Cable Box
To view or record a CATV channel:
1
2
3
Tune the TV to the correct video input channel.
Set the DVD Recorder+VCR to the output channel of
the cable box using the [CH …/†] or the [0-9]
buttons on your DVD Recorder+VCR (e.g., CH3).
Select the channel you wish to view on the cable
box.
DVD & VCR OUT
ANT. IN
OUT
Pr
Pb
COAXIAL
Y
AUDIO
S-VIDEO
OUT
IGITAL
D
AUDIO OUT
IN
R
COMPONENT OUT
RESET
L
VIDEO
RF OUT
Rear of DVD Recorder+VCR
If you are using a cable box to tune channels, it is not necessary to run Auto Channel Search as indicated on page 18.
11
Downloaded From Disc-Player.com Daewoo Manuals
CONNECTIONS
Caution
INTRODUCTION
• There are a variety of ways to connect the DVD Recorder+VCR to your TV and other equipment. Use only one of
the connections described below. Whichever TV connection you use will work with all input sources.
• Please refer to the manuals for your TV, VCR, stereo system, or other devices as necessary to make the best
connections.
• For better sound reproduction, connect the DVD Recorder+VCR’s AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo, or audio/video equipment. See ‘Connecting an Amplifier/Receiver‘ on page 13.
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 12
mac001
1200DPI 90LPI
Connections
Connecting a TV
Choose one of the following TV connections, depending on the capabilities of your equipment.
All video signals are available from all video outputs. That means that whichever TV connection you use, it will
work with all input sources, including VHS out of the Component/Progressive Video Output.
RF Coaxial Connection
Connect the RF OUT (TO TV) jack on the DVD
Recorder+VCR to the antenna in jack on your TV using
the supplied coaxial cable (R). If you use this
connection, tune your TV to the DVD Recorder+VCR’s
RF output channel (CH 3 or 4).
How to set the DVD Recorder+VCR’s RF output channel
Rear of TV
S-VIDEO
INPUT
COMPONENT/PROGRESSIVE VIDEO INPUT
Pr
VIDEO
INPUT
L
C
S
V
ANTENNA
INPUT
AUDIO INPUT
Y
Pb
R
A
R
Press [SETUP] and select Installation ➝ Modulator
Out to change the RF out channel. For details refer to
page 18.
DVD & VCR OUT
Audio/Video Connection
1 Connect the VIDEO OUT jack on the DVD
P
r
P
b
I N
A
UDIO
S-VIDEO
OUT
RESET
L
Recorder+VCR to the video in jack on your TV
using the supplied video cable (V).
Connect the Left and Right AUDIO OUT jacks
from the DVD Recorder+VCR to the left/right audio in jacks on your TV using the supplied audio cables (A).
C
OAXIAL
IGITAL
D
AUDIO OUT
2
A
NT. IN
O
UT
R
COMPONENT OUT
Y
V
IDEO
R
F OUT
S-Video Connection
1 Connect the S-VIDEO OUT jack on the DVD Recorder+VCR to the S-Video in jack on your TV using an S2
Video cable (S).
Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on
your TV using the supplied audio cables (A).
Component Video Connection
1 Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder+VCR to the corresponding
2
input jacks on your TV using a Y Pb Pr cable (C) if the Component Video jacks (Y, Pb, Pr) are available on
your TV.
Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on
your TV using the supplied audio cables (A).
Progressive Scan Connection
• If your television is a high-definition or ‘digital ready‘ television, you may take advantage of the DVD
Recorder+VCR’s Progressive Scan output for the highest video resolution possible.
• If your TV does not accept the Progressive Scan format, the picture will appear scrambled.
1
2
Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder+VCR to the corresponding
in jacks on your TV using an optional Y Pb Pr cable (C).
Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on
your TV using the supplied audio cables (A).
• Be sure to set the DVD Recorder+VCR to Progressive Scan mode. (Changing the Scan Mode in the Setup Menu;
see page 22.)
• Progressive Scan does not work with the RF, Audio/Video or S-Video connections.
12
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 13
mac001
1200DPI 90LPI
Connections
Connecting an Amplifier/Receiver
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/Pro Logic
Connect the Left and Right AUDIO OUT jacks on the DVD Recorder+VCR to the left and right audio in jacks on
your amplifier, receiver, or stereo system, using the supplied audio cables (A).
1
Connect the DVD Recorder+VCR’s DIGITAL AUDIO OUT jack (COAXIAL X) to the corresponding in jack on
your amplifier. Use an optional digital coaxial audio cable.
2
You will need to activate the DVD Recorder+VCR’s digital output; see ‘AUDIO Settings‘ on page 23.
Digital Multi-Channel Sound?
A digital multi-channel connection provides the best sound quality. For this you need a multi-channel
audio/video receiver that supports one or more of the audio formats supported by your DVD Recorder+VCR
(MPEG 2, Dolby Digital, and DTS). Check the receiver manual and the logos on the front of the receiver.
• Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is
selected.
• If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce
a strong, distorted sound or no sound at all.
• 5.1 channel digital surround sound via the digital connection can only be obtained if your receiver is equipped with
a digital multi-channel decoder.
• To see the audio format of the current DVD on the on-screen display, press [AUDIO].
The DVD Recorder+VCR does not perform internal (2- channel) decoding of DTS sound tracks. To enjoy DTS multichannel surround, you must connect the DVD Recorder+VCR to a DTS compatible receiver via one of the DVD
Recorder+VCR’s digital audio outputs.
Rear of DVD Recorder+VCR
DVD & VCR OUT
ANT. IN
OUT
Pr
Pb
COAXIAL
Y
IN
R
COMPONENT OUT
AUDIO
S-VIDEO
OUT
RESET
L
DIGITAL
AUDIO OUT
VIDEO
RF OUT
X
A
COAXIAL
DIGITAL INPUT
L
R
AUDIO INPUT
Amplifier (Receiver)
13
Downloaded From Disc-Player.com Daewoo Manuals
CONNECTIONS
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped
with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 14
mac001
1200DPI 90LPI
Connections
Connecting Optional Equipment
To receive audio/video signals from other equipment,
connect the LINE1 or LINE2 jacks on the DVD
Recorder+VCR to the audio/video out jacks on your
external component, using optional audio/video
cables.
ANT. IN
OUT
IN
R
AUDIO
L
VIDEO
RF OUT
Connecting a Digital Camcorder
Using the front panel DV IN jack, it is possible to connect a DV digital camcorder, video deck or DVD+R/RW
recorder and digitally transfer DV tapes or DVD+R/RW discs to DVD+R/RW.
Use a DV cable (not supplied) to connect the DV In/Out jack of your DV camcorder/video deck to the front panel
DV IN jack of the DVD Recorder+VCR.
This jack is for connection to DV equipment only. It is not DV Digital Camcorder
compatible with digital satellite tuners or D-VHS video
decks.
DV
IN/OUT
DV IN
Front of DVD Recorder+VCR
14
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 15
mac001
1200DPI 90LPI
Initial Installation
Initial Installation
After successfully connecting your DVD Recorder+VCR to your TV and other
devices, this chapter will show you how to complete the initial installation.
You must follow the initial installation process to set the time, date, channels,
and language preferences for the DVD Recorder+VCR.
A ‘Initial Setup Wizard‘ is displayed on the screen. Make sure the RF cable
from your antenna or cable TV jack is connected.
Initial Setup Wizard
1/8
Before using your recorder
Please complete this setup
Next
CONNECTIONS
1
Setup - Exit
2
OSD Language Setting 2/8
√
SETUP
Select the desired language for the on-screen menu using […/†]. Press
[ENTER] to confirm.
English
Spanish
French
Back
Enter - Confirm Setup - Exit Move
3
Select the desired disc menu language using […/†]. Press [ENTER] to
confirm.
…†
Disc Menu Language Setting 3/8
√
Default
English
Spanish
†
Back
Enter - Confirm Setup - Exit Move
4
Select the desired disc playback audio language using […/†]. Press [ENTER]
to confirm.
Audio Language Setting
√
Default
English
Spanish
…†
4/8
†
Back
Enter - Confirm Setup - Exit Move
5
Select the desired disc playback subtitle language using […/†]. Press
[ENTER] to confirm.
Subtitle Language Setting
√
Off
English
Spanish
…†
5/8
†
Back
Enter - Confirm Setup - Exit Move
6
Select the desired signal type using […/†]. Press [ENTER] to confirm.
TV/CATV
√
…†
6/8
TV
CATV
Auto Detect
Back
Enter - Confirm Setup - Exit Move
…†
15
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 16
mac001
1200DPI 90LPI
Initial Installation
7
The DVD Recorder+VCR detects channels automatically and stores them in
memory.
Auto Scan
7/8
TV
20/69
Back
Cancel
Setup - Exit
8
9
After finishing Auto Channel Search, set the clock.
Use [œ/√] to move left/right and use […/†] to change the settings.
Clock Setting
8/8
…
2005 / 1 / 1 Sat 12 : 00 AM
†
Back
Enter - Confirm Setup - Exit Move
10
After setting the clock, press [ENTER] to confirm. If you cancel the process
during Initial Installation, you should repeat this procedure.
16
Downloaded From Disc-Player.com Daewoo Manuals
…†
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 17
mac001
1200DPI 90LPI
Initial Setup
Setup Menu Overview
The DVD Recorder+VCR Setup menu includes four categories, including: Initial Setup, Disc Operation, Disc Edit
and Timer Recording. Press [SETUP], [œ/√] and [ENTER] on the remote control to view the first and second
levels of the Setup menu.
1. Initial Setup Screen
2. Disc Operation Screen
go to page 17~27.
go to page 47~49.
DVD Recorder
Init Setup ➞
DVD Recorder
Init Setup ➞
Init Setup
œ √ Select
Disc Operation
œ √ Select
Init Setup
Disc Oper
Disc Edit
Timer REC
Init Setup
Disc Edit
Timer REC
go to page 43~44.
DVD Recorder
Init Setup ➞
DVD Recorder
Init Setup ➞
Disc Edit
œ √ Select
Timer REC
œ √ Select
Disc Oper
Timer REC
4. Timer Recording Screen
go to page 50~52.
Init Setup
Disc Edit
SETUP
3. Disc Edit Screen
Disc Oper
Disc Edit
Timer REC
Init Setup
Disc Oper
INSTALLATION Settings
Tuning Band
1 Press [SETUP]. The Setup menu appears.
While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup
page.
2
3
Use [œ/√] to select ‘Installation Page
4
5
Press [√] to move to the second level.
While ‘Installation Page
‘TV/CATV‘.
‘.
‘ is selected, press [†] to select
- - Installation Page - •TV/CATV
Auto Scan
CH Add/Del
Modulator Out
Clock Setting
…
œ√†
Choose
TV
• CATV
ENTER
OK
SETUP
Exit
Use […/†] to select TV or CATV, then press [ENTER].
TV: If you are using a standard antenna to receive channels.
CATV: If you are using basic cable to receive channels.
If you are receiving channels from a cable box or satellite receiver connected to the LINE1 or LINE2 inputs, there is no
need to set Tuning Band or search for channels. Set the DVD Recorder+VCR to its LINE1 or LINE 2 input and select the
desired channel on your cable box or satellite receiver.
17
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 18
mac001
1200DPI 90LPI
Initial Setup
Auto Channel Search
The DVD Recorder+VCR has a frequency synthesized tuner capable of
receiving up to 181 channels. These include VHF channels 2-13, UHF
channels 14-69 and CATV channels 1-125.
Preparation:
Connect the DVD Recorder+VCR to the desired type of antenna or cable TV
system, as shown in ‘Connecting Antenna/Cable‘ on page 11.
1
2
3
- - Installation Page - TV/CATV
•Auto Scan
CH Add/Del
Modulator Out
Clock Setting
…
œ√†
Choose
ENTER
Follow steps 1-2 as shown under Tuning Band.
While ‘Installation Page
OK
SETUP
Exit
Auto Scan
‘ is selected, press […/†] to select ‘Auto Scan‘.
CATV
113/125
Cancel
Please wait...
Press [ENTER] to begin the channel search.
The tuner will automatically search for all available channels in your area and place them in the tuner’s
memory.
After Auto Channel Search is complete, follow the instructions above to make sure that Tuning Band is set correctly
(TV or CATV).
Add/Remove Channels
This feature allows you to manually add or delete channels from your
channel list.
1
2
3
4
Follow steps 1-2 as shown under Tuning Band.
5
Press [SETUP] to exit the Channel Add/Delete menu.
Use […/†] to select ‘CH Add/Del‘.
- - Installation Page - TV/CATV
Auto Scan
•CH Add/Del
Modulator Out
Clock Setting
Press [ENTER]. The Channel Add/Delete menu appears.
…
œ√†
Choose
ENTER
Use [CH+/-] to select a channel then toggle the add/delete selection by
pressing [œ/√].
OK
CH Add/Del
œ
SETUP
√
Delete
Confirm
CH Select
Add/Del
CH + –
ENTER
œ
œ √
Exit
Exit
OK
Move
Modulator Out
This feature allows you to set the RF Output channel to your TV (you only
need to set this if you are using the RF Out connection to your TV).
1
2
3
4
5
Follow steps 1-2 as shown under Tuning Band.
Use […/†] to select ‘Modulator Out‘.
- - Installation Page - TV/CATV
Auto Scan
CH Add/Del
•Modulator Out
Clock Setting
• CH3
CH4
Press [√] to move to the second level.
…
œ√†
Use […/†] to set the Modulator Out channel to ‘CH3’ or ‘CH4’.
Press [ENTER] to confirm.
18
Downloaded From Disc-Player.com Daewoo Manuals
Choose
ENTER
OK
SETUP
Exit
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 19
mac001
1200DPI 90LPI
Initial Setup
Set Clock
1 Follow steps 1-2 as shown under Tuning Band.
2 Use […/†] to select ‘Set Clock‘.
3 Press [ENTER]. The Set Clock menu appears.
4 Enter the date and time.
œ /√ (left/right): Moves the cursor to the previous or next column.
- - Installation Page - TV/CATV
Auto Scan
CH Add/Del
Modulator Out
•Clock Setting
…
œ√†
Choose
…/† (up/down): Changes the setting at the current cursor position.
5
Press [ENTER] to confirm your setting, then press [SETUP] to exit the Setup menu.
ENTER
OK
SETUP
Exit
Clock Setting
…
2005
†
1
1 Sat 2
42 AM
SETUP
19
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 20
mac001
1200DPI 90LPI
Initial Setup
RECORDING OPTIONS Settings
DVD Record Quality
You can set the default DVD recording quality to: HQ (High Quality - 1
hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Extended Play - 4 hrs/disc) or
SEP (Very Low Quality - 8 hrs/disc).
1
Press [SETUP]. The Setup menu appears.
While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup
page.
2
3
4
5
6
- - Record Options Page - •DVD Quality
Chapter Mark
VCR Quality
Use [œ/√] to select ‘Record Options Page
While ‘Record Options Page
…
œ√†
Choose
• HQ
SP
EP
SEP
ENTER
OK
SETUP
Exit
OK
SETUP
Exit
OK
SETUP
Exit
‘.
‘ is selected, press [†] to select ‘DVD Quality‘.
Press [√] to move to the second level.
Use […/†] to to select the desired Record Quality (HQ, SP, EP or SEP).
Press [ENTER] to confirm your selection, then press [SETUP] to exit the menu.
Auto Chapter
During recording, chapter markers are added automatically at fixed
intervals.
You can set this interval to 5 Min, 10 Min or 15 Min.
But when you set DVD Record quality “SEP”, Auto Chapter interval could be
set only ‘10 Min’ or ‘15 Min’.
To turn off automatic chapter marking, select ‘Off ‘.
Follow the same procedure as the DVD Record Quality.
- - Record Options Page - DVD Quality
•Chapter Mark
VCR Quality
…
œ√†
Choose
Off
• 5Min
10Min
15Min
ENTER
VCR Record Quality
You can set the default VCR recording quality to SP (Standard Play) or SLP
(Super Long Play).
SP is higher quality, but SLP provides 3 times the recording time; e.g., a 2
hour tape will record for 6 hours in SLP mode.
Follow the same procedure as the DVD Record Quality.
- - Record Options Page - DVD Quality
Chapter Mark
•VCR Quality
…
œ√†
20
Downloaded From Disc-Player.com Daewoo Manuals
Choose
SP
•SLP
ENTER
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 21
mac001
1200DPI 90LPI
Initial Setup
LANGUAGE Settings
OSD Language
Select a language for the DVD Recorder+VCR Setup menu and on-screen
displays.
1
- - Languages Page - •OSD Lang
Menu Lang
Subtitle Lang
Audio Lang
Press [SETUP]. The Setup menu appears.
• English
Français
Espanol
While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup
page.
Use [œ] and [√] to select ‘Languages Page
‘.
…
œ√†
Choose
ENTER
OK
SETUP
Exit
SETUP
Exit
SETUP
Exit
SETUP
Exit
While ‘Language‘ is selected, press [†] to select ‘OSD Lang‘.
Press [√] to move to the second level.
Use […/†] to select the desired language.
SETUP
2
3
4
5
6
Press [ENTER] to confirm your selection, then press [SETUP] to exit the menu.
Menu/Subtitle/Audio Language
Select your preferred language for Disc Menus, Subtitles, and Audio
soundtracks.
Default : The disc’s default language is selected.
- - Languages Page - OSD Lang
•Menu Lang
Subtitle Lang
Audio Lang
Follow the same procedure as the OSD Language.
…
œ√†
• Default
English
Spanish
French
Italian
Japanese
Chinese
Choose
ENTER
OK
- - Languages Page - OSD Lang
Menu Lang
•Subtitle Lang
Audio Lang
…
œ√†
• Off
English
Spanish
French
Italian
Japanese
Chinese
Choose
ENTER
OK
- - Languages Page - OSD Lang
Menu Lang
Subtitle Lang
•Audio Lang
…
œ√†
Choose
• Default
English
Spanish
French
Italian
Japanese
Chinese
ENTER
OK
21
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 22
mac001
1200DPI 90LPI
Initial Setup
PREFERENCE / Video Settings
1
Press [SETUP]. The Setup menu appears.
- - Preference Page - -
While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup
page.
2
3
4
Use [œ/√] to select ‘Preference Page
While ‘Preference Page
‘.
‘ is selected, press [†] to select ‘Video‘.
Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
• TV Aspect
Scan Mode
Choose
ENTER
OK
4:3 PS
Interlace
SETUP
Exit
Press [√]. The ‘Video‘ submenu is displayed.
TV Aspect Ratio
1 Use […/†] to select ‘TV Aspect‘ while the ‘Video‘ submenu is
displayed.
2
3
4
5
Press [√] to go to the second level.
Use […/†] to select the desired TV Aspect.
Press [ENTER] to confirm your selection.
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
Choose
TV Aspect
Scan Mode
ENTER
OK
• 4:3 LB
4:3 PS
16:9
SETUP
Exit
Press [SETUP] to exit the menu.
4:3 LB : Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and
below the picture.
4:3 PS : Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both
sides of the picture are cut off.
16:9 : Select when a 16:9 wide screen TV is connected.
Scan Mode
Progressive Scan Video provides the highest picture quality with reduced
flickering.
• If you are using the COMPONENT/PROGRESSIVE VIDEO OUT jacks, but
are connecting the DVD Recorder+VCR to a standard (analog)
television, set Scan Mode to Interlace.
• If you are using the COMPONENT/PROGRESSIVE VIDEO OUT jacks for
connection to a TV or monitor that is compatible with a Progressive
Scan signal, set Scan Mode to Progressive.
Follow the same procedure as TV Aspect Ratio to change the Scan Mode.
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
Choose
TV Aspect
Scan Mode
ENTER
OK
• Interlace
Progressive
SETUP
Exit
Caution
Once the Progressive Scan setting is entered, an image will only be visible on a Progressive Scan compatible TV or
monitor.
22
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 23
mac001
1200DPI 90LPI
Initial Setup
PREFERENCE / Audio Settings
Follow the same procedure as Video Settings to select Audio Settings.
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
• Digital Output
Dynamic
V SURR
Choose
ENTER
OK
Bitstream
Off
Off
SETUP
Exit
Digital Output
1 Use […/†] to select ‘Digital Output‘ while the Audio submenu is
displayed.
Press [√] to go to the second level.
Use […/†] to select the desired digital output type.
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
Digital Output
Dynamic
V SURR
• Bitstream
LPCM
SETUP
2
3
4
5
Press [ENTER] to confirm your selection.
…
œ√†
Choose
ENTER
OK
SETUP
Exit
Press [SETUP] to exit the menu.
LPCM
Select when connected to a 2 channel digital stereo amplifier. The DVD Recorder+VCR's digital audio signal will
be output in the PCM 2ch format when you play a DVD (or VHS tape) recorded with a Dolby Digital (only for
DVD) or MPEG soundtrack. If the DVD is recorded with a DTS sound track then no sound will be heard.
Bitstream
Select when connected to a Dolby Digital or DTS decoder (or an amplifier or other equipment with a Dolby
Digital or DTS decoder).
Dynamic Range
While watching DVD movies, you may wish to compress the dynamic range
of the audio output (the difference between the loudest and quietest
passages). This allows you to listen to a movie at a lower volume without
losing clarity of sound.
Set ‘Dynamic‘ to Low or High for this effect.
Follow the same procedure as ‘Digital Output‘ to set the Dynamic Range.
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
Choose
Digital Output
Dynamic
V SURR
ENTER
OK
• Off
Low
High
SETUP
Exit
Virtual Surround
You can enjoy a simulated 3D effect from two speakers by setting ‘V SURR
(Virtual Surround)’ to On.
Follow the same procedure as ‘Digital Output‘ to set the Virtual Surround
option.
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
Choose
Digital Output
Dynamic
V SURR
ENTER
OK
• Off
On
SETUP
Exit
23
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 24
mac001
1200DPI 90LPI
Initial Setup
PREFERENCE / Parental Controls
Set Parental Level
The Parental Controls feature allows you to prevent DVDs from being played based on their ratings or to have
certain discs played with alternative scenes. You can set the parental level from 1 to 8.
1
Press [SETUP]. The Setup menu appears.
While ‘Init Setup‘ is selected, press [ENTER] to go to the initial setup page.
2
3
Use [œ/√] to select ‘Preference Page
‘.
- - Preference Page - -
While ‘Preference Page
Ctrl‘.
‘ is selected, press [†] to select ‘Parental
Video
Audio
•Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
4
Press [√] to select ‘Parental‘. Then press [√] again to change parental
level.
Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
Use […/†] to select the desired parental level and press [ENTER] to
confirm.
Off : If you select Unlock, the Lock feature is not active. All discs will
play in full.
Level 1 to 8 : Some discs contain scenes not suitable for children. If you
Choose
ENTER
8 ADULT
OK
SETUP
Exit
- - Preference Page - -
œ√†
5
Parental
Password
• Parental
Password
Choose
ENTER
8 ADULT
OK
SETUP
Exit
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
Parental
Password
8 ADULT
•7
6
5
4
3
2
1 KID SAFE
OFF
set a rating for the DVD Recorder+VCR, all scenes with the same rating
Choose
OK
Exit
or lower will be played. Higher rated scenes will not be played unless
an alternative scene is available on the disc. The alternative must have the same rating or a lower one. If
no suitable alternative is found, playback will stop. You must enter the 4-digit password or change the
rating level in order to play the disc.
…
ENTER
œ√†
6
The Password Input dialog will appear. Enter a 4-digit password using the [0-9]
buttons. If this is the first time you have entered a password, you will be prompted to
enter the password again to confirm it.
Input Password
Password
0-9
…
œ√†
The initial password is ‘0000‘. You must enter this password before you can
change the Parental Level.
7
8
After setting the password, press [ENTER] while 'Set Parental Level' is
displayed.
Press [ENTER] to confirm your rating selection, then press [SETUP] to
exit the menu.
Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
Downloaded From Disc-Player.com Daewoo Manuals
OK
Input digits
Select
Cancel
ENTER
OK
- - Preference Page - -
œ√†
24
SETUP
Choose
• Parental
Password
ENTER
OK
7
SETUP
Exit
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 25
mac001
1200DPI 90LPI
Initial Setup
Change Password
1 While ‘Preference Page
‘ is selected, press [†] to select ‘Parental
Ctrl‘.
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
2
Parental
• Password
Choose
ENTER
Change
OK
SETUP
Exit
Select ‘Password‘ then press [√] to select ‘Change‘.
- - Preference Page - -
…
œ√†
3
4
Choose
Press [ENTER]. The Input Password submenu appears. Enter your current 4-digit
password then press [ENTER].
Enter a new 4-digit password, then press [ENTER]. Re-enter the new password to
confirm, press [ENTER].
Parental
Password
ENTER
• Change
OK
SETUP
SETUP
Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
Exit
Input Password
Old Password
New Password
Confirm PWD
OK
0-9
œ√
…
†
Input digits
Select
Cancel
ENTER
OK
• Master Password : If you forget your password, press 3,3,0,8 on the remote
control and then press [ENTER].
• Set the new password to something other than '0000'.
25
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 26
mac001
1200DPI 90LPI
Initial Setup
Various PREFERENCE Settings
Auto Clock
Auto Clock enables the DVD Recorder+VCR to set the clock automatically
whenever it is in Standby mode (plugged in but powered off).
1
2
3
4
Use […/†] to select ‘Auto Clock‘.
Press [√] to go to the second level.
Use […/†] to set the Auto Clock Status to On or Off.
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
• Off
On
Choose
ENTER
OK
SETUP
Exit
SETUP
Exit
Press [ENTER] to confirm.
VCR
This feature enables you to search for Index marks or specific times on your VHS tapes.
1
3
4
5
Use […/†] to select ‘VCR‘.
Press [√] to display the submenu.
Select ‘Index Search’ or ‘Go-To Search’.
If you select ‘Index Search’ and press [ENTER], a submenu appears.
- - Preference Page - -
Use […/†] to select the index number you want to search and press
[REW] or [FF].
Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
• Index Search
Go-To Search
Choose
ENTER
OK
Index Search
Press REW or FF to begin search.
…
01
†
6
If you select ‘Go-To Search’ and press [ENTER], a submenu appears.
Use […/†] to change the time counter number and press [REW] or
[FF].
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
…
œ√†
Choose
Index Search
• Go-To Search
ENTER
OK
SETUP
Go-To Search
Current Tape Counter is
00 : 00 : 00
Press REW or FF to go to
The VCR menu is activated only when a video cassette tape is inserted.
26
Downloaded From Disc-Player.com Daewoo Manuals
…
01 : 01 : 00
†
Exit
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 27
mac001
1200DPI 90LPI
Initial Setup
AutoPlay
Enables you to skip the ads and trailers and play your DVDs automatically
when they are inserted in the tray.
1
2
3
4
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
Use […/†] to select ‘AutoPlay‘.
Press [√] to go to the second level.
Use […/†] to set the AutoPlay Status to On or Off.
…
œ√†
• Off
On
Choose
ENTER
OK
SETUP
Exit
OK
SETUP
Exit
Press [ENTER] to confirm.
YourDVD
1
2
3
4
- - Preference Page - Video
Audio
Parental Ctrl
Auto Clock
VCR
AutoPlay
YourDVD
Use […/†] to select ‘YourDVD‘.
Press [√] to go to the second level.
Use […/†] to set the YourDVD Status to On or Off.
œ√
…
†
SETUP
Whenever DVD title is inserted, your settings (audio, subtitle language and
sound mode) will be displayed with YourDVD turned “On”.
• Off
On
Choose
Press [ENTER] to confirm.
ENTER
Your DVD
Audio Language
X
Subtitle Language V
Surround Mode
X
OK
System Information
System Information helps service personnel identify key firmware
information about your DVD Recorder+VCR in case service is required.
- - System Info Page - Version
0000BBBBTT
Main Build
Micom Software
VER0049.04
1.0.1
Loader Version
AA0600 A100
…
œ√†
Choose
ENTER
OK
SETUP
Exit
SETUP
Exit
Restore Defaults
If you wish, you can reset the DVD Recorder+VCR to its original factory
settings.
1
2
3
4
Press [SETUP].
Use [œ/√] to select ‘Restore Defaults Page
- - Restore Defaults Page - If you select this function all settings
will be removed and the product will be
‘.
Press [ENTER].
set into initial (factory) mode.
…
œ√†
Choose
The Initialize menu will appear. Use the […†œ √] buttons to select
‘OK‘ and press [ENTER].
• Some options cannot be reset, including Parental Controls, Password, and Country Code.
• After Restoring Defaults the unit reboots automatically and the Installation menu
appears. You must set the country, language, channel, and clock settings again.
ENTER
OK
Restore Defaults
Are you sure you want to restore
default settings?
OK
Cancel
27
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 28
mac001
1200DPI 90LPI
On-Screen Display Overview
The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loaded
disc or tape. To access the On-Screen Display (or OSD), press the [DISPLAY] button.
Displaying DVD Information
1
2
During disc playback, press [DISPLAY] to show information about the current disc.
While the disc information is displayed, press [DISPLAY] again to show the disc status window.
√√
DVD Video
00:00:25
» STOP
01:04:02
Changing menu options in display menu
1
2
3
Press [DISPLAY] during playback. The on-screen display appears on the TV screen.
•
Displaying icons on DVD disc
Use [œ√] to select the desired icon on the on-screen display. Press [ENTER] to display a submenu.
Use […†] to change the numbers. Press [ENTER] to confirm.
02/17
Title : Shows the current title number and total number of titles, and skips to the desired title
number.
Chapter : Shows the current chapter number and total number of chapters, and skips to the
001/002
0:00:26
desired chapter number.
Time Elapsed : Shows the elapsed playing time, and skips to the desired time.
Audio : Shows the current audio soundtrack language, encoding method, and channel number,
and changes the setting; AC3 5.1 CH English or AC3 2 CH English
Subtitle : Shows the current subtitle language, and changes the setting; Off, English, French or
Off
Off
Off
Off
Spanish
Repeat : Shows the current repeat mode, and changes the setting; Chapter, Title, All or Off
A-B Repeat : Shows the current A-B repeat mode, and changes the setting; A-, A-B or Off
Random Repeat : Shows the current random repeat mode, and changes the setting; On or Off
OSD Language : Shows the current OSD language, and changes the setting; English, French or
1
Spanish
28
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 29
mac001
1200DPI 90LPI
On-Screen Display Overview
•
Displaying icons on CDDA disc
01/16
0:00:41
Track : Shows the current track number and total number of tracks, and skips to the desired
track number.
Time Elapsed : Shows the elapsed playing time, and skips to the desired time.
Audio Effect : Shows the current audio effect, and changes the setting; L-Mono, R-Mono, Stereo
or Mix-Mono
Off
Off
Off
Off
Sound Effect : Shows the current sound effect, and changes the setting; Off, Concert, Living
Room, Hall, Bathroom, Cave, Area or Church
Repeat : Shows the current repeat mode, and changes the setting; Track, All or Off
A-B Repeat : Shows the current A-B repeat mode, and changes the setting; A-, A-B or Off
Random Repeat : Shows the current random repeat mode, and changes the setting; On or Off
OSD Language : Shows the current OSD language, and changes the setting; English, French or
1
Spanish
PLAYBACK
29
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 30
mac001
1200DPI 90LPI
On-Screen Display Overview
Displaying TV Information
While watching TV, press [DISPLAY] to display/remove the on-screen display.
If no rewritable DVD disc is inserted, you would see a screen like the following:
If a DVD+R or DVD+RW disc is inserted, the disc information is displayed at the
first button press.
DVD-Video
CH-6
02:26 AM
■ STOP
Displaying VCR Information
The On-Screen Display provides feedback on the status of the DVD
Recorder+VCR and/or the currently loaded tape. To access the On-Screen
Display (or OSD), press the [DISPLAY] button.
CH-6
02:26 AM
■ STOP
Changing the TV Audio Channel
Some TV programs are broadcast with both a main and a Secondary Audio Program (SAP). You can change the
TV audio using the [AUDIO] button.
Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below.
• STEREO+SAP Audio Signal : Stereo ➝ Mono ➝ SAP ➝ Stereo
• STEREO Audio Signal : Stereo ➝ Mono ➝ Stereo
• SAP Audio Signal : Mono ➝ SAP ➝ Mono
• MONO Audio Signal : Mono
The current audio channel is displayed on-screen.
• If SAP is selected, but there is no SAP channel being broadcast, you will still hear the main audio channel.
• If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.
• When an external input is selected, the audio channel can be switched only to Stereo.
Changing TV Channels
If no disc is playing, you can change TV channels using the [0-9] or [CH +/-] buttons on the remote control or [CH
…/†] buttons on the front panel.
Antenna channels are numbered 2 through 69. Cable channels are numbered 1 through 125.
30
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 31
mac001
1200DPI 90LPI
DVD Playback
Before You Begin
1
2
Press the [DVD] button to set the remote control to operate the DVD deck.
Turn the TV on and select the video input source connected to the DVD Recorder+VCR.
DVD Selected
Audio system: Turn the audio system on and select the input source connected to the DVD
Recorder+VCR.
Actions are now
for DVD
■ Stop
Playing a DVD
1 Press [EJECT] to open the disc tray.
2 Load your disc in the tray with the playback side down (label side up).
3 Press [EJECT] to close the tray.
4 READING appears on the front panel display, and playback starts automatically. If playback does not start,
press [PLAY (√)]. In some cases, the Disc menu might appear instead.
When a DVD+RW or unfinalized DVD+R (-R, -RW) is inserted, no title is played automatically but the current TV
channel displays on the screen.
1 If you want to play a title on the DVD+R (+RW, -R, -RW), you must
press [MENU] or [PLAY] to display the disc menu of a thumbnail index
for each recorded title on the disc.
The index picture screen of the title will be displayed. Also title
information (name of recording, recorded day, time, recording
quality) will be displayed.
TITLE CH10
10:29AM 12/21/04
0:01:00SEP
TITLE CH10
10:34AM 12/25/04
0:01:00HQ
EMPTY
1:50:54SP
● Press REC to overwrite title(s).
2 Select a title to play using [œ √] then press [ENTER] or [PLAY].
If a Disc menu is displayed
• A Disc menu may be displayed when you load a DVD. Use the [œ √…†] buttons to select the title/chapter you
want to view, then press [ENTER] to start playback. Press [TITLE] or [MENU] to return to the Disc menu.
• If the Parental Level feature is set and the disc is below the current Parental Level setting, the 4-digit code must
be entered and/or the disc must be authorized; see ‘Set Parental Level‘ on page 24.
• The DVD Recorder+VCR will not play discs with Region codes different from the DVD Recorder+VCR. The Region
code for this DVD Recorder+VCR is 1 (one).
• Unless stated otherwise, all operations described below use the remote control. Some features may also be
available in the Setup menu.
• A disc which is recorded by computer at high speeds (greater than or equal to 2x) may not be recognized.
• A disc which is recorded with unauthorized movie material may not be played.
• A disc which is recorded by other recorder or not recorded correctly may not be recognized or played.
31
Downloaded From Disc-Player.com Daewoo Manuals
PLAYBACK
Playing a DVD+R (+RW, -R, -RW)
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 32
mac001
1200DPI 90LPI
DVD Playback
Still Picture and Frame-by-Frame Playback
1 Press [PLAY/PAUSE] during playback. The DVD Recorder+VCR will go into Pause mode.
2 You can back up or advance the picture frame-by-frame by pressing [FF (√√)] repeatedly during Pause
mode.
Fast Forward/Backward
1 Press [REW (œœ)] or [FF (√√)] during playback. The DVD Recorder+VCR will go into Search mode.
2 Press [REW] or [FF] to select the desired speed: √√ 2X, √√ 4X, √√ 8X, √√ 16X, √√ 32X, √ (forward) or
œ, œœ 2X, œœ 4X, œœ 8X, œœ 16X, œœ 32X (backward).
Slow Motion
Press [SLOW+] or [SLOW–] to enter Slow Motion mode. The default speed is 1/2. When you press [SLOW+] or
[SLOW–] repeatedly, the speed will be set to 1/4, 1/8, 1/16, and normal speed.
Changing the Audio Language
Press [AUDIO] and then press [AUDIO] repeatedly during playback to hear a different audio language or audio
track.
Subtitles
Press [SUBTITLE] and then press [SUBTITLE] repeatedly during playback to select among all available subtitle
languages.
Camera Angle
If a DVD contains scenes recorded at different camera angles, angle icon displays automatically. You can select
among these angles during playback.
Press [ANGLE] and then press it repeatedly during playback to select the desired angle.
The number of the current angle appears on the TV screen.
The Camera Angle icon is displayed on the TV screen when alternate angles are available.
Zoom
The Zoom function allows you to magnify the video image and scroll around the enlarged image.
1
Press [ZOOM] during Play mode to activate the Zoom function.
Each press of the [ZOOM] button changes the Zoom level as follows: 1X (normal size) ➝ 2X ➝ 3X ➝ 4X ➝
1/2X ➝ 1/3X ➝ 1/4X ➝ 1X (normal size)
2
3
Use the [œ √…†] buttons to scroll around the zoomed picture.
To resume normal playback, press [ZOOM] repeatedly until the X1 (normal picture) appears.
• The Zoom function may not work on some DVDs.
32
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 33
mac001
1200DPI 90LPI
DVD Playback
Repeat
1 To repeat the currently playing chapter, press [REPEAT]. REPEAT CHAPTER appears on the TV screen.
2 To repeat the currently playing title, press [REPEAT] a second time. REPEAT TITLE appears on the TV
screen.
3
4
To repeat the whole disc, press [REPEAT] a third time. REPEAT DISC appears on the TV screen.
You can play in other modes (including Repeat, A-B, Shuffle, or Scan) by pressing [REPEAT] repeatedly.
You can repeat a scene that starts when ‘Repeat A-‘ displays on the screen. To mark the end point, press [A-B]. Press
[A-B] again to repeat the scene.
A-B
You can repeat a scene between two points (A and B):
1
2
3
4
5
Press [PLAY/PAUSE] play to the start of the desired scene.
Press [A-B] to mark the start point.
Use [FF], [NEXT] to search the end point.
Press [A-B] to mark the end point.
The marked scenes are repeated continuously until you stop the repeat by pressing [A-B] button again.
PLAYBACK
Selecting Titles
When a disc has more than one title, you can select among all available titles as follows:
1
Press [DISPLAY] and use […†] to select the Title icon. Press [ENTER] to display a submenu. Use […†] to
select the desired title number and press [ENTER] to confirm.
Selecting Chapters
When a title on a disc has more than one chapter, you can select among all available chapters as follows:
1
2
Press [PREV (§)] or [NEXT (∞)] briefly during playback to select the next or previous chapter.
To skip directly to any chapter during playback, press [DISPLAY]. Use [œ√] to select the Chapter icon, then
press [ENTER] to display a submenu. Use […†] to select the desired chapter number and press [ENTER] to
confirm.
33
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 34
mac001
1200DPI 90LPI
DVD Playback
Disc Menus
Many DVDs contain Disc menus that allow you to access special features. To open a Disc menu, press [MENU].
Then use the [0-9] buttons to directly select the desired options, or use the […†] buttons to highlight your
desired selection and press [ENTER].
1
2
Press [MENU]. The Disc menu is displayed.
To exit the Disc menu, press [STOP] or [TV VIEW].
Title Menus
1 Press [TITLE]. If the current title has a menu, the Title menu will appear on the TV screen. Otherwise, the
Disc menu may appear.
2
The Title menu may contain camera angles, spoken languages and subtitle options, as well as the chapters
for the title.
Digest
For displaying the edit menu for DVD+RW / +R discs, for setting chapter markers.
1
2
Press [DIGEST]. The Digest menu is displayed.
To exit the Disc menu, press [STOP] .
Digest
Title Digest
Chapter Digest
Title Interval
Chapter Interval
…† Select
34
Downloaded From Disc-Player.com Daewoo Manuals
■ Exit
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 35
mac001
1200DPI 90LPI
VCR Playback
Before You Begin
1
2
Press the [VCR] button to set the remote control to operate the VCR deck.
Turn the TV on and select the video input source connected to the DVD Recorder+VCR.
Audio system: Turn the audio system on and select the input source connected to the DVD
Recorder+VCR.
VCR Selected
Actions are now
for VCR
■ Stop
Playing a VHS Tape
1 Insert a prerecorded video cassette.
If the DVD Recorder+VCR is powered off, it will power on automatically.
Make sure the TIMER indicator on the front panel display is not lit. If it is, press [POWER] once.
If a tape without a safety tab is inserted, the DVD Recorder+VCR will start playback automatically.
If the DVD Recorder+VCR is powered on by inserting a video cassette, playback will not start automatically.
2 Press [PLAY].
3 Press [STOP] to stop playback.
The STOP icon appears on the TV screen. If the tape reaches the end before [STOP] is pressed, the DVD
Recorder+VCR will automatically stop, rewind, and eject the tape.
Tracking Control
Auto Tracking
The automatic tracking function adjusts the picture to remove snow or streaks. It works in the following cases:
• When a tape is played for the first time.
• When the tape speed (SP, SLP) changes.
• When streaks or snow appear because of scratches on the tape.
Manual Tracking
If noise appears on the screen during playback, press the [TRACKING +/-] buttons on the remote control until
the noise on the screen is reduced.
• In case of vertical jitter, adjust these controls very carefully.
• Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for more
than 3 seconds.
35
Downloaded From Disc-Player.com Daewoo Manuals
PLAYBACK
The PLAY icon appears on the TV screen. It is not necessary to select the tape speed (SP, SLP) for playback.
It will be automatically selected by the DVD Recorder+VCR.
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 36
mac001
1200DPI 90LPI
VCR Playback
Special Playback Features
Notes on special playback features
Horizontal lines (noise bars) will appear on the TV screen. This is normal.
The audio is automatically muted during special playback modes, so there is no sound during search, slow motion, etc.
During high-speed picture search, a short time is needed to stabilize tape speed when re-entering Play mode. Slight
interference may be observed during this time.
Fast Forward/Backward
This function lets you visually search forward and backward for a desired scene on your tape.
1
Press [REW] or [FF] during playback.
Search mode will be activated.
If the DVD Recorder+VCR is left in Search mode for more than 3 minutes, the DVD Recorder+VCR will
automatically resume Play mode to protect the tape and video heads.
2
To return to normal playback, press [PLAY].
Still Picture
1 Press [PLAY/PAUSE] during playback.
A still picture appears on the TV screen.
If a still picture vibrates vertically, stabilize it by using the [TRACKING +/-] buttons on the remote control.
If the DVD Recorder+VCR is left in Still mode for more than 5 minutes, the DVD Recorder+VCR will
automatically enter Stop mode to protect the tape and video heads.
2
To return to normal playback, press [PLAY].
Slow Motion
1 Press [SLOW+] for Slow Motion playback.
2 Press [SLOW+] and [SLOW-] repeatedly to adjust the Slow Motion playback speed.
Counter Memory Function
This is useful if there is a section of tape you want to view immediately after recording or if you want to return
to the same point several times.
1
2
Begin recording or playing a tape.
3
4
Press [STOP] when recording or playback finishes.
At the point you want to locate later, reset the real-time counter to 0:00:00 by pressing [CLEAR]. Continue
to play or record.
You can make the tape automatically stop when the counter returns to about ‘0:00:00‘ by setting the
counter to ‘0:00:00‘ in the ‘Go-To Search‘ function under ‘Setup’ ➝ ‘Preference’ ➝ ‘VCR’; see page 26.
36
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 37
mac001
1200DPI 90LPI
Other Disc Playback
Audio CD/MP3 PLAYBACK
The DVD Recorder+VCR can play audio CDs and MP3 files on CD-ROM, CD-R or CD-RW discs.
1
Insert the CD disc and close the tray. The Audio CD or MP3 CD menu
appears on the TV screen after a few moments to load the disc.
2
Use […†] to select a track or a file, then press [PLAY] or [ENTER].
••• MP3 •••
During playback, the current track's elapsed playing time will appear on
the menu. Playback will stop at the end of the disc.
On the MP3 CD menu, you can display the folders on the disc.
Use […†œ √] to select the folder icon on the MP3 CD menu then press
[ENTER] or [PLAY].
You can also display just the tracks in the folders.
Use […†œ √] to select a folder then press [ENTER].
3
4
5
While playing an Audio CD, use [FF] or [REW] for 2X, 4X, 8X, 16X, 32X speed playback.
Use [PLAY/PAUSE] to pause playback while the disc is playing.
To stop playback at any time, press [STOP].
• Press [REPEAT] to repeat a track (file) and press again to repeat the whole disc.
PLAYBACK
JPEG / Kodak Picture CD PLAYBACK
The DVD Recorder+VCR can display JPEG files on CD-R/RW and Kodak Picture CDs.
1
Insert your CD and close the tray. The JPEG CD or Kodak Picture CD
folder tree appears.
2
If there are folders which contain JPEG files (e.g., pictures on a Kodak
Picture CD), select the desired folder using […†œ √] and press
[ENTER].
3
Select the thumbnail you want to display using […†œ √] and press
[ENTER].
4
The full size image will be displayed and a slide show starts
automatically with a time interval of 10 seconds.
37
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 38
mac001
1200DPI 90LPI
Other Disc Playback
5
6
7
Press [NEXT] or [PREV] to manually skip to the next or previous image.
Press [√] (or [œ]) to rotate the image (counter) clockwise.
Press [STOP] to exit the slideshow.
• When a CD contains both MP3 files and JPEG files, the default Play mode is JPEG image files.
• The DVD Recorder+VCR can playback up to 1000 files per disc.
• MP3 files encoded below 64kbps are not supported.
38
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 39
mac001
1200DPI 90LPI
Basic Recording
Recording from TV
Follow the instructions below to record a TV program.
1 Turn on the DVD Recorder+VCR and load a recordable disc or tape.
Make sure your TV input is set to view the DVD Recorder+VCR.
2 Set the desired Recording mode by pressing [REC MODE] repeatedly.
DVD ; Approx 1 Hour (HQ mode), 2 Hours (SP mode), 4 Hours (EP mode), 8 Hours (SEP mode)
VCR ; SP: 2 Hours (T-120), SLP: 6 Hours (T-120)/ 8 Hours (T-160)
3 If your DVD Recorder+VCR does not show a TV program, press [TV VIEW] on the remote control. Use [CH … /
†] to select the TV channel you wish to record.
4 Press [AUDIO] to select the audio channel to record (Stereo, SAP, or Mono).
The table below shows what audio channel will be recorded with different settings and different types of
broadcasts.
The last column (Monitor Audio) shows what you will hear during recording. For example, if the TV
broadcast is in Stereo, then setting the DVD Recorder+VCR to Stereo will record the broadcast in Stereo,
and the Monitor Audio will also be in Stereo.
• If you set the audio channel to SAP, but no SAP channel is broadcast, the main audio (Mono or Stereo) will
be recorded.
MONO
MONO
STEREO
Left
Right
MONO
MONO
SAP
STEREO
SAP
MONO
STEREO
MONO+ SAP
STEREO+SAP
Broadcast Audio
L Ch
R Ch
MONO
MONO
L
R
L
L
L
R
MONO
MONO
MONO
MONO
SAP
SAP
L
R
SAP
SAP
MONO
MONO
Monitor
Audio
MONO
STEREO
Left
Right
MONO
MONO
SAP
STEREO
SAP
MONO
RECORDING
Selected Audio
PLAYBACK
TV Broadcast
5 Press [REC (●)] once.
Recording will start. The REC indicator lights on the front panel display.
Recording continues until you press [STOP] or the disc is full.
To record for a fixed length of time, see One Touch Record on the next page.
6 Press [STOP (■)] to stop recording.
• The maximum number of DVD titles per disc is 49. If the DVD Recorder+VCR is powered off during DVD recording,
the recording will not be saved.
• If a DVD+RW or unfinalized DVD+R (-R, -RW) disc is inserted in the tray, no title is played automatically after
loading is finished.
• If you are recording to a blank DVD+R (+RW, -R, -RW) disc, it may take up to 7 minutes for post processing after
recording.
• The DVD Recorder+VCR guarantee the record quality when you use under 4X DVD disc.
39
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 40
mac001
1200DPI 90LPI
Basic Recording
One Touch Record (OTR)
One Touch Recording allows you add recording time in fixed increments at the touch of a button.
1 Follow steps 1-4 under Recording from TV.
2 Press [REC (●)] repeatedly to set the length of the recording.
Recording starts after the first press. Each subsequent press increases the recording time by 30 minutes
within the available space or 30 minutes (VCR, to a maximum of 240 minutes). The recording time is
displayed on the front panel display.
Checking the Recording Time
Total time and recorded time are displayed on the TV screen after pressing [DISPLAY]. Recorded time is
displayed on the OSD.
To Pause the Recording
1
2
Press [PLAY/PAUSE] to pause the disc or tape during recording.
When you want to continue recording, press [PLAY/PAUSE] or [REC (●)].
Note
• To quit One Touch Recording, press [STOP].
• The DVD Recorder+VCR will automatically power off when One Touch Recording ends.
Tip (VCR mode only)
• Always use [PLAY/PAUSE] for best results when making changes during recording.
For example: To change channels during recording, first press [PLAY/PAUSE] to put the unit in Pause mode. Then
select the desired channel on the DVD Recorder+VCR, and press [PLAY/PAUSE] again to resume recording.
• You cannot record on the VCR deck and DVD deck at the same time.
• While the VCR is recording, DVD playback is possible. However, while the DVD is recording, all VCR functions are
disabled.
40
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 41
mac001
1200DPI 90LPI
Basic Recording
One Touch Copy - DVD to VHS
• If the DVD you are attempting to copy is copy-protected, you will not be able to copy the disc. It is not permitted to
copy Macrovision encoded DVDs.
• Copy to VCR does not work in Progressive Scan Mode.
1 Insert a Disc.
Insert the disc you wish to copy in the DVD deck and close the disc tray.
2 Insert a VHS Tape.
Insert a blank VHS videotape into the VCR deck.
3 Find the place on the DVD disc tape from which you want to start recording using
the [PLAY/PAUSE], [FF] and [REW] functions. And press [STOP].
4 Press [VCR œœ DVD] on the front panel.
5 Press [ENTER] to select the desired Record Mode in ‘Copy to Tape’ menu:
• SP (Standard Play)
• SLP (Super Long Play, 3 times SP).
Copy to Tape
Choose quality and
press COPY key:
SLP
SP
■ Stop
6 Press [VCR œœ DVD] again to start copying.
7 Stop the Copy Process
To stop copying at any time, press [STOP]. You must stop the Copy process manually when the DVD movie
ends, or the unit may replay and record over and over again.
RECORDING
Copy Edit (DVD ➝VCR)
During one touch copy you can search or change REC SPEED and resume copy.
1
2
3
4
During One Touch Copy, press [PLAY/PAUSE] to enter COPY EDIT mode.
Search with [FF/REW] or [NEXT/PREV] button.
Press [VCR œœ DVD] and you can change REC SPEED.
Press [VCR œœ DVD] again to resume copy.
41
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 42
mac001
1200DPI 90LPI
Basic Recording
One Touch Copy - VHS to DVD
You can copy the contents of a VHS tape to a DVD±R or DVD±RW using the [COPY] button. This allows you to
archive your old VHS tapes to DVD.
If the VHS videotape you are attempting to copy is copy-protected, you will not be able to copy the tape. It is not
permitted to copy Macrovision encoded tapes.
1 Insert a VHS Tape.
Insert the VHS videotape you wish to copy into the VCR deck.
2 Insert a DVD±R or DVD±RW disc.
Insert a blank DVD±R or DVD±RW disc in the DVD deck and close the disc tray.
When using a DVD+RW disc, you must initialize before copying; see page 47.
3 Find the place on the VHS tape from which you want to start recording using the [PLAY/PAUSE], [FF] and [REW]
functions. And press [STOP].
4 Press [VCR √√ DVD] on the front panel.
5 Press [ENTER] to select the desired Record Mode in ‘Copy to Disc’ menu:
•
•
•
•
HQ (High Quality - 1 hr/disc)
SP (Standard Play - 2 hrs/disc)
EP (Extended Play - 4 hrs/disc)
SEP (Very Low Quality - 8 hrs/disc)
6 Press [VCR √√ DVD] again to start copying.
7 Stop the Copy Process
To stop copying at any time, press [STOP].
Copying will stop automatically when the VHS tape ends.
Copy Edit (VCR ➝ DVD)
During one touch copy you can search and resume copy.
1
2
3
4
Press [PLAY/PAUSE] to enter COPY EDIT mode.
Press [PLAY/PAUSE] again to playback.
Search with [FF/REW] button.
Press [VCR √√ DVD] to resume copy.
42
Downloaded From Disc-Player.com Daewoo Manuals
Copy to Disc
Choose quality and
press COPY key:
HQ
SP
EP
SEP
■ Stop
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 43
mac001
1200DPI 90LPI
Timer Recording
The Timer Recording function allows you to record up to 8 programs within a period of one month.
1 Insert recordable media such as DVD±R ,DVD±RW, recordable VHS tape.
2 Press [TIMER].
or Press [SETUP] and select ‘Timer REC’. Then press [ENTER].
DVD Recorder
Init Setup ➞
Timer REC
œ √ Select
Init Setup
The ‘Timer Recording’ menu appears.
Use […†] to move to a timer recording slot, and press [ENTER] to modify
it.
Disc Oper
Disc Edit
Timer Rec
Timer REC
01/07 08:08:40 AM
Date Start
Stop Input Media Repeat Mode Result
New Input
1/1 1:00AM 2:00AM CH2
DVD Once
SP Overdus
If you did not set the clock on the DVD Recorder+VCR, you must do so before
programming a timer recording.
■ Delete
§ Prev Page
3 Enter the necessary information for your Timer Recording(s).
Timer Rec
Date
TIMER
Exit
01/07 08:08:40 AM
Start
Stop
Input
7 : 0 PM
7 : 0 PM
CH 2
Repeat
…
1 / 7
Once
†
Wed
Media
Title
Mode
DVD
TITLE CH2
SP
TIMER
SETUP
ENTER Confirm and Exit
Prev Page
Exit timer recording
Timer Rec
01/07 08:08:40 AM
Date
Start
Stop
Input
1 / 7
7 : 0 PM
7 : 0 PM
CH 2
Repeat
Once
Wed
[œ √] – Moves the cursor left/right.
[…†] – Changes the setting at the current cursor position.
Press [SETUP] to exit the Timer Record menu.
Press [ENTER] after filling in all the program information.
Press [TIMER] to display the Timer Record List.
Media
Title
DVD
TITLE CH2
ENTER
TIMER
Confirm and Exit
Exit timer rec
●
Mode
SP
Edit
4 Press [ENTER] to save the program.
The Timer Record List will appear.
5 Press [SETUP] to exit the Timer Record List.
6 Timer indicator will light or blinking. Power Off the DVD Recorder+VCR to start the Timer Recording.
43
Downloaded From Disc-Player.com Daewoo Manuals
RECORDING
• Date – Choose a date up to 1 month in advance, or select a daily or weekly
program.
• Start – Set the recording start time.
• Stop – Set the recording end time.
• Input – Choose the desired channel, or one of the external inputs from
which to record.
• Repeat – Choose frequency of the recording. Once, Daily, Weekly, Weekday.
• Media - Choose desired media (DVD or VHS) using […†].
• Title - Enter into title edit mode pressing [●].
• Mode – Choose a Record mode.
DVD: HQ, SP, EP or SEP
VCR: SP, SLP
Edit
∞ Next Page
ENTER
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 44
mac001
1200DPI 90LPI
Timer Recording
• The Timer indicator lights on the front panel display when the DVD Recorder+VCR is ready for the Timer
Recording.
• The DVD Recorder+VCR will record the audio according to the current TV tuner setting (Stereo, Mono or SAP). Use
the [AUDIO] button to set the audio before switching the DVD Recorder+VCR to Standby mode.
• The DVD Recorder+VCR will automatically power off when the Timer Recording ends.
• There is a short delay when a timer recording finishes to confirm the recorded program. If two timer recordings
are set to record sequentially (one right after the other), the very beginning of the later program may not be
recorded.
Canceling a Timer Recording
You can clear a Timer Recording any time before the recording actually starts.
• Use […†] to select the program you want to erase on the Timer Recorder List. Press [■STOP] to delete the
program.
Stopping a Timer Recording in Progress
After a Timer Recording has started, you can still cancel the program by pressing and holding [■STOP] for 3
seconds.
Timer Recording Troubleshooting
Even if a Timer Recording is set, the DVD Recorder+VCR will not record if:
•
•
•
•
No disc is loaded.
A non-recordable disc is loaded.
Disc is protected in the ‘Disc Operation’ menu; see page 47.
There are already 49 titles recorded on the disc.
You cannot enter a Timer Recording if:
• A recording is already under way.
• The start time has already passed.
• Eight Timer Recordings have already been set.
If two or more Timer Recordings overlap:
• You should set only one Timer Recording.
• You can choose replace old Timer Recording or not.
• Only one Timer recording will work.
Timer Recording
Recording time is overlapped with
existing entry.Replace it?
OK
Cancel
Confirmation is not possible when:
• Disc is protected in the ‘Disc Operation’ menu; see page 47.
• There are already 49 titles recorded on the disc.
If the disc is damaged, the recording may not complete successfully, even if the Check field shows ‘Rec. OK‘.
44
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 45
mac001
1200DPI 90LPI
Recording from an External Input
Recording from External Components
You can record from an external component, such as a camcorder or VCR, connected to any of the DVD
Recorder+VCR’s external inputs.
1 Make sure the component you want to record from is connected properly to the DVD Recorder+VCR; see pages
11 and 14.
2 Use [ … †] to select the external input to record from.
•
•
•
•
Tuner: Built-in tuner
LINE1 : Audio/Video on front panel
LINE2 : Audio/Video Input on back panel
DV: DV input on front panel.
3 Load a recordable disc or tape.
4 Set the desired Recording mode by pressing [REC MODE] repeatedly.
DVD: HQ (High Quality - 1 hr/disc), SP (Standard Play - 2 hrs/disc), EP (Extended Play - 4 hrs/disc), SEP (Very
Low Quality - 8 hrs/disc)
VCR: SP (Standard Play), SLP (Super Long Play - 3 times SP)
5 Press [REC (●)] once.
Recording will start. The REC indicator lights on the front panel display.
Recording continues until you press [STOP] or the disc is full.
To record for a fixed length of time, see ‘One Touch Record‘ on page 40.
6 Press [STOP (■)] to stop recording.
Note
If your source is copy-protected, you will not be able to record it using the DVD Recorder+VCR. See ‘Copyright Notice‘
on page 4 for more details.
RECORDING
45
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 46
mac001
1200DPI 90LPI
Recording from an External Input
Recording from a Digital Camcorder
You can record from a digital camcorder connected to the DV IN jack on the front panel of the DVD
Recorder+VCR.
You can use the DVD Recorder+VCR remote to control both the camcorder and the DVD Recorder+VCR. Before
recording, make sure the digital camcorder is properly connected to the front panel DV IN jack; see page 14.
The source signal must be DVC SD format.
Some camcorders cannot be controlled using the DVD Recorder+VCR remote.
If you connect a second DVD recorder using a DV cable, you cannot control the second recorder from this one.
You cannot control the DVD Recorder+VCR remotely from a component connected to the DV IN jack.
You cannot record date and time information from a DV cassette.
1 Make sure your digital camcorder is connected to the front panel DV IN jack; see page 14.
2 Press [TV VIEW] repeatedly to select the DV input.
DV appears on the front panel display and the TV screen.
3 Find the place on the camcorder tape from which you want to start recording.
For best results, pause playback at the point you want to start recording. Depending on your camcorder, you
can use the DVD Recorder+VCR remote to control the camcorder using the STOP, PLAY, and PAUSE
functions.
4 Press [REC] once to start recording.
Recording is automatically stopped if the DVD Recorder+VCR detects no signal. You can pause or stop the
recording by pressing [PLAY/PAUSE] or [STOP]. You cannot control the camcorder from the remote control
during recording.
What is DV?
Using DV, also known as i.LINK, you can connect a DV-equipped camcorder to the DVD Recorder+VCR using a
single DV cable for input and output of audio, video, data and control signals.
The i.LINK interface is also known as IEEE 1394-1995.
“i.LINK” and the “i.LINK” logo are trademarks.
• The DVD Recorder+VCR is only compatible with DV-format (DVC-SD) camcorders. Digital satellite tuners
and Digital VHS video recorders are not compatible.
• You cannot connect more than one DV camcorder at a time to the DVD Recorder+VCR.
• You cannot control the DVD Recorder+VCR from external equipment connected via the DV IN jack (including
two DVD Recorders).
• It may not always be possible to control the connected camcorder via the DV IN jack.
• Audio input to the DV IN jack should be 32 or 48kHz (not 44.1kHz).
• Picture disturbance on the recording may occur if the source component pauses playback or plays an
unrecorded section of tape, or if the power fails in the source component, or if the DV cable becomes
disconnected.
46
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 47
mac001
1200DPI 90LPI
Disc Operation
Disc Initialize
• If you load a blank DVD±R (±RW) disc, it will be initialized (formatted to enable recording).
• Do not start recording until disc initialization is complete.
• If you load a DVD±RW that has already been used you can record a program immediately.
Disc Operation in DVD±RW disc
For recordable DVD media, such as DVD±R and DVD±RW discs, you can manage the disc using the Disc Menu.
The DVD±RW Disc Menu allows you to erase, lock, or unlock your disc. You can also make it compatible with
most other DVD players.
At first, go to Disc Operation mode.
1
2
Press [SETUP]. The Setup menu appears.
While ‘Disc Oper‘ is selected, press [ENTER] to go to the Disc
Operation page.
DVD Recorder
Init Setup ➞
Disc Operation
œ √ Select
Init Setup
If you select ‘OK‘ and press [ENTER], all the contents of the disc will
be lost.
Erase
Finalize
Protect
Make Comp
Adapt
Disc Info
_
Disc Edit
Timer REC
RECORDING
Erase the disc (DVD±RW)
3 Use […/†] to select the ‘Erase’ menu.
4 If you want to erase the whole disc, press [ENTER].
5 To confirm, select ‘OK‘. To cancel, select ‘Cancel‘.
Disc Oper
Disc Operation
…†
ENTER
DISC
Select
OK
Exit
Exit
Erase
Erase this disc?
OK
Cancel
If you want to protect a disc from accidental recording, editing, or
erasing, you can lock the disc. Later, if you change your mind, you can
unprotect the disc.
3
4
5
Use […/†] to select ‘Protect’ menu.
If you want to protect the whole disc, press [ENTER].
EDITING
Protect Disc (DVD±R, DVD±RW)
Erase
Finalize
Protect
Make Comp
Adapt
Disc Info
_
Disc Operation
…†
Select
ENTER
OK
Exit
DISC
Exit
To confirm, select ‘OK‘. To cancel, select ‘Cancel‘.
Protect
Protect this disc?
If you select ‘OK‘ and press [ENTER], all the contents of the disc will be protected.
OK
Cancel
47
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 48
mac001
1200DPI 90LPI
Disc Operation
Make Compatible (DVD±RW)
'Make Compatible' for a DVD+RW will automatically create a menu
screen for navigating the disc. This menu screen is accessible by
pressing [MENU] or [TITLE].
3
4
5
Press […/†] to select ‘Make Compatible‘.
If you want to make the disc compatible, press [ENTER].
Erase
Finalize
Protect
Make Comp
Adapt
Disc Info
_
Disc Operation
…†
Select
ENTER
OK
DISC
Exit
Exit
To confirm, select ‘OK‘. To cancel, select ‘Cancel‘.
Make Compatible
Make Compatible?
If you select ‘OK‘ and press [ENTER], your disc will be make compatible.
OK
Cancel
• ‘Make Compatible’ can take up to 3-4 minutes depending on the type of disc, how much is recorded on the disc,
and the number of titles on the disc.
• If you do not make your DVD+RW disc compatible, your edits will not be recognized by other DVD players.
Adapt
DVD recorder has own Disc menu structure, so many Disc menu
structure exist because many company produce many kinds of DVD
recorder. When recordable DVD disc is recorded in other brand DVD
recorder, the Disc has different Disc menu from DAEWOO DVD recorder.
Then the Disc menu should be changed to DAEWOO Disc menu. It is
called Adapt function. After Adapt function is completed, recorded title
contents are exactly same, but only Disc menu is changed.
3
4
5
Erase
Finalize
Protect
Make Comp
Adapt
Disc Info
_
Disc Operation
…†
Select
ENTER
OK
Exit
DISC
Exit
Adapt?
Use […/†] to select ‘Adapt’ menu.
Adapt this disc?
OK
Cancel
If you want to adapt the whole disc, press [ENTER].
To confirm, select ‘OK‘. To cancel, select ‘Cancel‘.
If you select ‘OK‘ and press [ENTER], the disc will be adapted.
Information
3 Press […/†] to select ‘Disc Info’.
4 The Disc Info Menu shows you disc information, such as disc type,
number of recordings, total titles, free space, etc.
Erase
Finalize
Protect
Make Comp
Adapt
Disc Info
_
Downloaded From Disc-Player.com Daewoo Manuals
Select
OK
…†
ENTER
DISC
Exit
Exit
Label
Empty
Media
DVD+RW
Status
Recordable (NTSC)
Close
48
Disc Operation
Title NO.
3
Remainder
HQ : 60 (M)
SP : 116 (M)
EP : 233 (M)
154/4414MB
SEP : 438 (M)
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 49
mac001
1200DPI 90LPI
Disc Operation
Disc Operation in DVD±R, DVD-RW disc
For recordable DVD media, such as DVD±R and DVD±RW discs, you can manage the disc using the Disc Menu.
The DVD±R, DVD-RW Disc Menu allows you to rename your disc or finalize it so it will be compatible with most
other DVD players.
At first, go to Disc Operation mode.
1
2
Press [SETUP]. The Setup menu appears.
While ‘Disc Oper‘ is selected, press [ENTER] to go to the Disc Operation page.
Finalize (DVD±R or DVD-RW)
Finalizing a DVD±R, DVD-RW ‘locks’ its recordings in place so the disc
can be played on most standard DVD players or computers equipped
with DVD-ROM drives.
3
4
5
Use […/†] to select ‘Finalize’ menu.
If you want to finalize the whole disc, press [ENTER].
To confirm, select ‘OK‘. To cancel, select ‘Cancel‘.
If you select ‘OK‘ and press [ENTER], the disc will be finalized.
Erase
Finalize
Protect
Make Comp
Adapt
Disc Info
_
Disc Operation
…†
Select
ENTER
OK
Exit
DISC
Exit
Finalize
Finalize this disc?
OK
Cancel
• Once you have finalized a DVD±R, DVD-RW disc, you cannot edit or record anything else on that disc.
• It may take over 7 minutes for finalizing the edited disk, you'd better wait till the set finish the finalizing operation.
• ‘Finalize’ can take up to 3-4 minutes depending on the type of disc, how much is recorded on the disc, and the
number of titles on the disc.
EDITING
49
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 50
mac001
1200DPI 90LPI
Disc Edit
Title Menu
You can manage the titles on your DVD±R/RW discs using the Title
menu.
At first, go to Disc Edit mode.
1
2
Press [SETUP]. The Setup menu appears.
DVD Recorder
Init Setup ➞
Disc Edit
œ √ Select
Init Setup
Disc Oper
Disc Edit
Timer REC
While ‘Disc Edit‘ is selected, press [ENTER] to go to the Disc Edit
page.
Edit
TITLE CH 10
TITLE CH 10
10:20 am 12/21/04
10:34 am 12/21/04
SEP
HQ
Label
Erase
Divide
Protect
Chap Edit
Index Pic
_
…
œ√†
Label a Title
ENTER
Select
Confirm
To change the name of a title:
2
3
4
5
6
Select the title to be labelled using [ENTER].
SETUP
§
10:20 am 12/21/04
10:34 am 12/21/04
SEP
HQ
Select ‘Label’ using [… †] .
Press [ENTER] to change the title name.
The Keyboard Menu will be displayed. Use [œ √…†] to select a
character or function and press [ENTER].
Select
Confirm
SETUP
§
Exit
Prev Page
Exit
∞ Next Page
Label Title
TITLE CH 10
b c d
k l m
Space
y z _
x
e
n
s
-
‘A’
f
o
t
g h i
p q r
u v w
Backspace
‘a’
Input digits
§ Prev Page
0-9
several seconds.
Label
Erase
Divide
Protect
Chap Edit
Index Pic
_
…
œ√†
ENTER
After the new title name is complete, select ‘OK’ and press
[ENTER].
Erase a Title
2 Select the title to beerased using [ENTER].
3 Then select ‘Erase‘ using [… †].
4 Press [ENTER] to erase the title.
5 Select 'Yes' and press [ENTER] to confirm.
6 The Erase Title progress bar will be displayed. This may takes
Exit
∞ Next Page
Edit
TITLE CH 10
TITLE CH 10
a
j
7
Exit
Prev Page
Clear
OK
Cancel
Symbol
Backspace
∞ Next Page
œœ
…
œ√†
Select
Edit
TITLE CH 10
TITLE CH 10
10:20 am 12/21/04
10:34 am 12/21/04
SEP
HQ
Label
Erase
Divide
Protect
Chap Edit
Index Pic
_
…
œ√†
ENTER
Select
Confirm
SETUP
§
Exit
Prev Page
Exit
∞ Next Page
Erase
After erasing is complete, the erased title remains as an empty title.
Erase the title(s)?
OK
You can erase titles on DVD±RW discs only.
50
Downloaded From Disc-Player.com Daewoo Manuals
Cancel
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 51
mac001
1200DPI 90LPI
Disc Edit
Divide (DVD±RW)
This feature allows you to divide a title into two titles for DVD±RW.
2
3
4
5
Select the title to be divided using [ENTER].
6
7
Press [ENTER] when the preferred picture is on your TV screen.
Edit
TITLE CH 10
TITLE CH 10
10:20 am 12/21/04
10:34 am 12/21/04
SEP
HQ
Select ‘Divide’ using [… †] .
Press [ENTER] to divide the title.
Label
Erase
Divide
Protect
Chap Edit
Index Pic
_
Select 'Yes' and press [ENTER] to confirm.
…
œ√†
ENTER
Select
Confirm
SETUP
§
Exit
Prev Page
Exit
∞ Next Page
Divide title
It may take a few minutes to divide the title.
■
Cancel
ENTER
Confirm
Divide
Please wait....
Protect
If you want to protect a title from accidental recording, editing, or
erasing, you can lock the title. Later, if you change your mind, you can
unprotect the title.
2
3
4
5
Edit
TITLE CH 10
TITLE CH 10
10:20 am 12/21/04
10:34 am 12/21/04
SEP
HQ
Select the title to be protected using [ENTER].
Select ‘Protect’ using [… †] .
Press [ENTER] to protect the title.
Label
Erase
Divide
Protect
Chap Edit
Index Pic
_
…
œ√†
ENTER
Select
Confirm
SETUP
§
Select 'Yes' and press [ENTER] to confirm.
Exit
Prev Page
Protect
Protect the title(s)?
OK
6
Exit
∞ Next Page
The Protect Title progress bar will be displayed. This may takes several seconds.
Protect icon ‘ ’ will appear in front of Title name.
Cancel
Protect
Please wait....
Edit
10:20 am 12/21/04
10:34 am 12/21/04
SEP
HQ
Label
Erase
Divide
Protect
Chap Edit
Index Pic
_
…
œ√†
ENTER
Select
Confirm
SETUP
§
Exit
Prev Page
EDITING
TITLE CH 10
TITLE CH 10
Exit
∞ Next Page
51
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 52
mac001
1200DPI 90LPI
Disc Edit
Edit Chapters
2 Select the title to be edited using [ENTER].
3 Select ‘Chap Edit’ using [… †] .
4 Press [ENTER] to edit the chapters.
5 Select 'Yes' and press [ENTER] to confirm.
Edit
TITLE CH 10
TITLE CH 10
The Chapter Edit Menu will be displayed. Use [œ √…†] to select
one of the various chapter marker functions (Add, Delete, or Hide).
7
Press [ENTER] to confirm.
Add/Delete a Marker
You can add a chapter marker anywhere in a title during playback.
Once the chapter is marked, you can use the chapter search feature as
described above.
You can add/delete chapter markers or delete all chapter markers in a
title.
SEP
HQ
Select
Confirm
SETUP
§
Exit
Prev Page
Exit
∞ Next Page
Chap Edit
Title
Play
Add Mark
Del Makr
Hide CH
1
_
…
œ√†
ENTER
Select
Confirm
SETUP
§
Exit
Prev Page
Exit
∞ Next Page
Chap Edit
Title
Play
Add Mark
Del Mark
Hide CH
Hide Chapters
This feature allows you to hide or unhide a chapter. After hiding a
chapter, the chapter is not deleted but only hidden. If a chapter is
hidden then it shows ‘Unhide Chapter‘ and vice versa.
Label
Erase
Divide
Protect
Chap Edit
Index Pic
_
…
œ√†
ENTER
6
10:20 am 12/21/04
10:34 am 12/21/04
1
_
…
œ√†
ENTER
Select
Confirm
SETUP
§
Exit
Prev Page
Exit
∞ Next Page
Change Index Picture
Each title displayed in the Playlist menu is represented by a thumbnail
picture taken from the start of that title or chapter. If you prefer, you
can select a different still picture from within the title.
2
3
4
5
Edit
TITLE CH 10
TITLE CH 10
10:20 am 12/21/04
10:34 am 12/21/04
Select the title to be edited using [ENTER].
Select ‘Index Pic’ using [… †] .
Press [ENTER] to change the index picture.
Select
Confirm
SETUP
§
Exit
Prev Page
Set index picture
■
Downloaded From Disc-Player.com Daewoo Manuals
Label
Erase
Divide
Protect
Chap Edit
Index Pic
_
…
œ√†
ENTER
Press [ENTER] when the preferred picture is on your TV screen.
52
SEP
HQ
Cancel
ENTER
Confirm
Exit
∞ Next Page
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 53
mac001
1200DPI 90LPI
Troubleshooting
Check the following guide for the possible cause of a problem before contacting customer support.
Symptom
Cause
Solution
No power.
The power cord is disconnected.
No picture.
The TV is not set to receive DVD
Recorder+VCR signal output.
Plug the power cord into the wall outlet
securely.
Select the appropriate video input on the
TV so the picture from the DVD
Recorder+VCR appears on the TV screen.
Connect the video cable securely.
No sound.
Playback picture is poor.
DVD Recorder+VCR does
not start playback.
The video cable is not connected
securely.
The TV power is turned off.
The equipment connected with the
audio cable is not set to receive
DVD Recorder+VCR signal output.
The audio cables are not connected
securely.
The power on the equipment
connected with the audio cable is
turned off.
The audio cables are damaged.
The disc is dirty.
Tape heads are dirty.
Tape is a rental or was recorded on
another VCR.
No disc is inserted.
No tape is inserted.
An unplayable disc is inserted.
The disc is placed upside down.
The disc is not placed within the
guide.
The disc is dirty.
The Parental Control level is set.
Some channels are skipped
over when using [CH…†].
The skipped channels were deleted
with the CH. Add/Del feature.
Picture or sound of
broadcasting channel is
weak or missing.
Camcorder image not shown.
Antenna or cables are loose.
Wrong Tuning Band is selected in
the DVD Recorder+VCR Setup menu.
Camcorder is off.
Replace with new ones.
Clean the disc.
Clean the video heads.
Use [Tracking +/–] for manual tracking
adjustment while a tape is playing.
Insert a disc or tape. (Check that the disc
indicator on the front panel display is lit.)
Insert a playable disc. (Check the disc
type, color system, and regional code.)
Place the disc with the playback side
down.
Place the disc on the disc tray correctly
inside the guide.
Clean the disc.
Cancel the Parental Control function or
change the rating level.
You cannot connect via the DVD
Recorder+VCR. Connect the component
directly to your TV.
Use the CH. Add/Del feature to restore
channels. See ‘Add/Remove Channels‘ on
page 18.
Tighten connections or replace cable.
Try all ‘Tuning Band‘ options; see page
17 for details.
Turn camcorder on and operate properly.
53
Downloaded From Disc-Player.com Daewoo Manuals
REFERENCE
The video signal from the external
component is copy-protected.
Turn on the equipment connected with
the audio cable.
EDITING
Picture from external input
is distorted.
Turn on the TV.
Select the correct input mode on the
audio receiver so you can listen to the
sound from the DVD Recorder+VCR.
Connect the audio cables securely.
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 54
mac001
1200DPI 90LPI
Troubleshooting
Symptom
Cause
Solution
Camcorder image via A/V
input to DVD Recorder+VCR
is not shown on TV screen.
Can’t play disc recorded
on this DVD Recorder+VCR
on another DVD player.
DVD Recorder+VCR’s source is not
set to LINE1/LINE2 composite.
Use [TV VIEW] to select AV input channel
(LINE1/LINE2 composite).
The disc was not finalized (or not
made compatible if using a
DVD+RW).
Some players will not play even a
finalized disc.
Discs recorded with copy-once
material cannot be played on other
players.
The remaining blank space on the
Cannot record or did not
disc is insufficient.
record successfully.
The source you are trying to record
is copy-protected.
When setting the recording
channel, the channel is tuned on
your TV’s tuner.
Clock in DVD Recorder+VCR is not
Timer Recording not
set to correct time.
possible.
Timer has been programmed
incorrectly.
TIMER indicator light does not
appear after programming timer.
Stereo Audio Record and/or TV is not Stereo-compatible.
Broadcast program is not in stereo
Playback not present.
format.
DVD Recorder+VCR A/V Out jacks
are not connected to TV A/V In
jacks.
DVD Recorder+VCR Audio/Video
Out is not selected for viewing at
the TV.
DVD Recorder+VCR’s TV audio
channel is set to SAP or MONO.
The remote control is not pointed at
Remote control does not
the remote sensor of the DVD
work properly.
Recorder+VCR.
The remote control is too far from
the DVD Recorder+VCR.
There is an obstacle in the path of
the remote control and the DVD
Recorder+VCR.
54
Downloaded From Disc-Player.com Daewoo Manuals
Finalize the disc; see page 49.
No solution.
No solution.
Use another disc.
You cannot record the source.
Select the channel on the DVD
Recorder+VCR’s built-in TV tuner.
Set clock to correct time. See ‘Set Clock‘
on page 19.
Reprogram Timer. See ‘Timer Recording‘
on page 43.
Reprogram Timer.
No solution.
No solution.
Make A/V connections. Stereo is
available only via A/V output from DVD
Recorder+VCR.
Select AUX or A/V source as TV input.
Set TV audio channel mode to Stereo.
See ‘Changing the TV Audio Channel‘ on
page 30.
Point the remote control at the remote
sensor of the DVD Recorder+VCR.
Operate the remote control within 23 ft
(7m).
Remove the obstacle.
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 55
mac001
1200DPI 90LPI
Troubleshooting
Symptom
All of the buttons don’t
work or DVD screen stop
suddenly.
Cause
Solution
The batteries in the remote control
are dead.
The remote control is locked.
Replace the batteries.
The DVD Recorder+VCR is in the
abnormal status.
DVD Recorder+VCR has interrupted
by itself.
Press and hold [POWER] button on font
over 5 seconds.
Press [RESET] switch on the rear panel.
Press [RESET] switch on the rear panel.
Moisture Condensation
Moisture condensation can occur:
In locations where moisture condensation may occur:
When the DVD Recorder+VCR is moved from a cold
place to a warm place.
Keep the DVD Recorder+VCR plugged into an AC
power outlet with the power on. This will help
prevent condensation.
Under extremely humid conditions.
When condensation has occurred, wait a few hours
for the DVD Recorder+VCR to dry before using it.
REFERENCE
55
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 56
mac001
1200DPI 90LPI
Technical Specifications
General
Power requirements AC 120V, 60 Hz
Power consumption Maximum 25W (Power-Off :
3.4W)
Dimensions (approx.)
16.9*3.4*12.3 inches
(430*86.5*314 mm)(w*h*d)
Mass (approx.)
Net : 11.02 lbs (5.00kg),
Gross :14.22 lbs (6.45kg)
Operating temperature
41°F to 95°F (5°C to 35°C)
Operating humidity 5% to 90%
Signal system
NTSC
Recordable discs
Recordable time
DVD Video Recording, DVDVIDEO
DVD+R, DVD+RW, DVD-R, DVDRW
DVD : Approx 1 Hour (HQ mode),
2 Hours (SP mode), 4 Hours (EP
mode), 8 Hours (SEP mode)
VCR : SP: 2 Hours (T-120), SLP : 6
Hours (T-120) / 8 Hours (T-160)
Video recording format
Sampling frequency 27MHz
Compression format MPEG 2
Audio recording format
Sampling frequency 48kHz
Compression format MPEG1 Layer2
VCR Specifications
Head system
Timer
Tape speed
Tape width
Rewind time
Antenna
VHF output signal
Channel coverage
DVD Specifications
Laser system
Semiconductor laser,
wavelength 650 nm
Frequency response DVD (PCM 48 kHz): 8 Hz to 22
kHz, CD: 8 Hz to 20 kHz
Signal-to-noise ratio More than 90 dB
Harmonic distortion Less than 0.06%
Dynamic range
More than 90 dB
Inputs
Recording
Recording formats
- A-1)
Frequency range
20Hz to 20kHz
Signal-to-noise ratio 43 dB
Dynamic range
75 dB
Channel separation 45 dB
4 Head Video, 2 Head Hi-Fi
helical scan azimuth system
12-hour display type with AM,
PM
SP: 33.35 mm/sec, SLP: 11.12
mm/sec
12.7 mm
less than 2 minutes (T-120)
75 ohms (VHF/UHF)
Channel 3 or 4 (Switchable)
VHF: 2-13, UHF: 14-69, CATV: 1125 (4A, A-W, W+1 - W+84, A-5
ANTENNA IN
VIDEO IN
AUDIO IN
DV IN
Antenna or CATV input, 75 Ω
1.0 Vp-p 75 Ω, sync negative,
RCA jack x 2
-8.8 dBm more than 47 k, RCA
jack (L, R) x 2
4 pin (i.LINK/IEEE 1394 standard)
Outputs
1 Vp-p 75 Ω, sync negative, RCA
jack x 1
S-VIDEO OUT (Y)
1.0 V (p-p), 75 Ω, negative sync,
Mini DIN 4-pin x 1, (C) 0.286 V
(p-p) 75 Ω
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, negative
sync, RCA jack x 1
(Progressive Scan) (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA
jack x 2
AUDIO OUT
Digital audio : 0.5 V (p-p), 75 Ω,
RCA jack x 1
Analog audio : 1.1 Vrms (1 kHz, 6 dB), 600 Ω, RCA jack (L, R) x 2
RF OUT
Channel 3 or 4 (Switchable)
VIDEO OUT
Accessories
RCA cable .........................1 RF Coaxial Cable ....... 1
Blank DVD+RW disc ........ 1 Remote control ......... 1
Batteries .......................... 2
Design and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories. ‘Dolby‘ and the double-D symbol are trademarks of
Dolby Laboratories.
DTS and DTS Digital Out are registered trademarks of Digital Theater Systems, Inc.
Macrovision
This product incorporates copyright protection technology that is protected by method claims of certain U.S
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
56
Downloaded From Disc-Player.com Daewoo Manuals
DF-Q74D2N-JS
2005.12.8 5:8 PM
˘
` 57
mac001
1200DPI 90LPI
Warranty
DEAM (Daewoo Electronics America) warrants each new electronic product manufactured by it to be free from
defective material and workmanship and agrees to remedy any such defect or to furnish a new part (at the
Company’s option) in exchange for any part of any unit of its manufacture which under normal installation, use
and service disclosed such defect, provided the unit is delivered by the owner to us or to our authorized
distributor from whom purchased or authorized service station intact, for our examination with all transportation
charges prepaid to our factory. To establish and receive warranty service at our factory or authorized service
facilities, proof of purchase/dated sales invoice is required. Written authorization must be obtained before any
merchandise is returned to the factory.
This warranty does not extend to any of our electronic products which have been subjected to misuse, neglect,
accident, incorrect wiring not our own, improper installation, unauthorized modification, or used in violation of
instructions furnished by us, nor units which have been repaired or altered outside of our factory, nor to cases
where the serial number thereof has been removed, defaced or changed.
This warranty is in lieu of all warranties expressed or implied and no representative or person is authorized to
assume for us any other liability in connection with the sale of our electronic products.
Over-the-counter exchange of initially defective units
A unit is described as initially defective when the dealer opens the unit and finds that it is inoperative or a
customer opening a new unit finds that it is initially defective. This unit may be returned to the factory by the
dealer for exchange. Under no circumstances will a customer be permitted to return an initially defective unit
directly to the factory.
Model
Parts
Labor
DVR-S06
1 Year
3 months
This instrument is listed by Underwriter’s Laboratories, Inc. It is
designed and manufactured to meet rigid U.L. safety standards against
X-radiation, fire, casualty and electrical hazards.
Daewoo Electronics America Inc.
120 Chubb Ave,
Lyndhurst, NJ 07071 USA
For more information about this or other
Daewoo products, call 1-800-DAEWOO8.
Downloaded From Disc-Player.com Daewoo Manuals
Download PDF