Data sheet for Deka's heavy duty AGM batteries.

Data sheet for Deka's heavy duty AGM batteries.
COMMERCIAL
AGM
FEATURES AND BENEFITS
• Lower internal resistance
provides quick starting power
and enhances the efficiency of
the vehicle’s electrical system
• Over 2x the cycle life* means
better power for electronic loads
when key-off power is crucial
• 20x more vibration protection*
resists vibration damage for
better performance and
longer life
• Hard-impacting case and
cover resists external
damage for extended use
• Tough, stainless steel
terminals prevent
corrosion for more
power and better
performance
* Compared to
conventional
designs
Today’s heavy-duty trucks depend on batteries to do
much more than crank the engine. Starting batteries
alone aren’t designed to withstand the continuous
discharge that new auxiliary equipment demands. The
Intimidator’s faster recharging and 2x more cycle life*
can accommodate multiple accessory loads without
shortening the battery’s performance and life. Features
like 20x more vibration resistant* are critical for
commercial vehicles that frequently undergo intense
wear and daily abuse.
Starting & Cycling Service (Day cab, Sleeper,
Pick up & Delivery, Vocational) batteries deliver
intimidating power and durability to handle anything
from complex on-board electronics and plug-in devices
to dozens of extra lights. They are also made to deliver
the quick, high-powered discharge that will bring even
the toughest engines to life.
Starting & Heavy Cycling Service (HVAC, APU,
Reefer Units, Extra Auxiliary Loads) batteries have
a specially reinforced internal construction that
withstands the multiple charging and recharging
service of these demanding auxillary powered systems.
For commercial vehicles with heavy power demands,
Intimidator batteries provide the industry’s best deep
cycle and moderate starting battery powered solution.
®
Intimidator AGM Solutions for Intimidating Battery Needs
Intimidator is a pioneer brand in the development of the form, fit, and function of AGM battery technology.
It has been tested and proven to best meet the criteria of the commercial truck industry.
POWER-PERFORM® FULL-FRAME POSITIVE & NEGATIVE PLATES
• Better withstands severe service demands
• Prevents life-robbing electrical shorts from exposed wire
ENHANCED ELECTROLYTE SUSPENSION SYSTEM
• Absorbs more electrolyte, protects internal components
• Micro-porous glass separators prevent acid spills and terminal corrosion
1. Convenient Handle
maximizes ease of transport and installation
(also available without handle)
2. Stainless Steel Studs
(SAE post available) resists life-robbing corrosion
3. Safety Relief Valve System
prevents capacity loss and controls pressure
4. Fortified Posts, Straps, and Welds
resist vibration damage, maximize current transfer
5. Heavy-Duty Power-Perform Plates
optimize battery’s power and energy storage capacity
6. Enhanced Electrolyte Suspension System
completely absorbs electrolyte for spillproof design
7. Optimized Component Compression
provides superior vibration resistance
— Ultra-Pure Demineralized Electrolyte
precision filled for extended life
COMMERCIAL INTIMIDATOR AGM BATTERIES
®
GROUP
NO.
PART
NO.
31
31P
31
9A31
9A31P
8A31
CCA
@ 0°F
PERFORMANCE LEVEL
REF.
RES.
CA.
CAP.
20 AH
RATE
APPROX.
WEIGHT
(lbs.)
MAXIMUM OVERALL DIMENSIONS
Length
Width
Height
inch
mm
inch
mm inch
mm
DUAL PURPOSE ABSORBED GLASS MAT (AGM) VALVE REGULATED
925
190
1060
100
63
13 330
6 3⁄4 171 9 1⁄2
925
190
1060
100
63
13 330
6 3⁄4 171 9 1⁄2
800
200
1000
105
69
13 330
6 3⁄4 171 9 1⁄2
241
241
241
FOOTNOTES
2, 17, X
2, 17
2, 17, 38, 39, X
FOOTNOTES: 2. Black cover / Gray case 17. Includes handle 38. “Non-spillable” defined by DOT (Department of Transportation)
definitions 39. “Non-spillable” defined by ICAO (International Commercial Airline Organization) and IATA (International Airline
Transport Association) definitions X - 3/8" x 16 stainless steel stud posts (9A31P has SAE automotive posts)
Experience the East Penn Advantage
East Penn’s A3 ™ Advanced-Cubed precision-focused manufacturing
approach ensures the process behind the technology delivers critical
quality at each stage of battery production. INTIMIDATOR batteries
are supported by A3 manufacturing to optimize the life, power, and durability
of the battery’s design and performance.
Lyon Station, PA 19536-0147 • Phone: 610-682-6361 • Fax: 610-682-4781
Order Department Hotline: 610-682-4231 • www.dekabatteries.com
E.P.M. Form No. 1739 Rev. 1/12
© 2012 by EPM Printed in U.S.A.
All data subject to change without notice. No part of this document may be copied or reproduced,
electronically or mechanically, without written permission from the company.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement