Blaupunkt | TEV-501 | BP4820FHD IB - Blaupunkt Australia

please contact Customer Support at
www.blaupunkt-australia.com.au
Manual Scan
Channel Edit
Signal Information
Lock System
Setup Setting
OSD Language
Audio Language
Subtitle
Teletext
Blue Screen
Mode Setting
Time Settings
PVR Settings
First Time Setup
Reset
20
20
20
21
22
22
22
22
22
22
22
22
23
23
23
Accessories
24
25
26
27
28
29
Viewing Texts
30
31
31
33
33
34-35
36
36
36
37
38
39
42
User Manual
BB 4*12
BM4*14
Neck/Stand / Screws
User Manual
SOURCE
MENU
CH+
BB 4*12
Neck/Stand
BM4*14
CH-
Screws
VOL+
VOL-
STANDBY
Fix the neck to the stand with
6 pcs BB4*12 screws as image 1.
2.Fix the neck to the
TV unit as image 2.
3.Insert 5 pcs BM4*14
screws as image 3
BB4x12(6pcs)
image 2
image 1
BM4x14(5pcs)
image 3
1
6
2
3
USB
OUT
COAXIAL
USB IN
L
Y
Pb/Cb
COMPONENT IN
Pr/Cr
AUDIO
PC IN
VGA
RF IN
HDMI1 HDMI2 HDMI3
R
AV IN
OUT
VIDEO
COAXIAL
RF IN
MUTE
Press this button for mute sound,
press this button again for resume
audio listening
Freeze press this button to hold the
picture,press again for cancel hold.
Lock System
Use in Text ,DTV and TV
Press this button to view the detail
information of the signal in ATV/DTV
mode
Press this button to select
the picture mode directly
Press this button to select the sound
mode directly
Rec Start to record
Back to Firsttime
setup menu
USB
Stop
Evenlist Enter the scheduled
recording list.
D-Setup Enter the DVD setup menu
(Not used on this Mode).
Select your favourite program.
DVD Eject (Not used on this Mode).
Nicam key
Pause/Play/Timeshift
Remote Code:807F
BP4820FHD
48"
300
5000:1
MAX 120W
VIDEO
R
L
293k Wh
6
7W+7W
1095.9x92.1x641.4mm
1095.9x250x683.2mm
13.6
3
/Dot to Dot/Full
1920 x 1080
SOURCE
1
2
Enter the master password “8888”in the Lock system,
then select clear lock option to clear your previous password .
3
USB
YPbPr
1
2
3
USB
21
If this is the first time you are turning on the TV and there are no programs in the TV memory,
The First time setup menu will appear on the screen, press the
button to select the
following options to finish the first time setup.
1. OSD language : Select your language.
2.Mode setting
:Select the TV mode.
3.Country : Select your country
4.Autoscan : Select your TV service.
5.LCN : Set the LCN to ON/OFF.
Ensure your aerial , cable or dish is plugged in to the TV ,then select the start option and
press OK button , the TV will start to install the service you have selected.
Personal
FULL
,
and then press the OK button to confirm.
,
and then press the OK button to confirm.
, and then press the OK button to confirm.
Saturation
and then press the OK button to confirm.
Hue
and then press the OK button to confirm.
Hue
,
,
Advanced Settings Press OK button or button to
activate the advaned setting
menu.
NR: Press the
button to
select the NR mode from
Medium/Strong/off/Weak.
MEPG NR: Press the
button
to select the MEPG NR mode from
Medium/Strong/off/Weak.
Dynamic Contrast: Press the
button to select the Dynamic
Contrast: mode from Medium/
Strong/off/Weak.
PC setting Press the
button to select PC settings option,then press the OK or button to enter the
sub menu to set (O nly available on PC mode)
Auto Scan
Personal
To select auto scan mode ( DTV/ATV/ DTV+ATV)
1. Press OK or
button to enter Auto scan Menu .
Auto Scan
Press the
button to display time shift bar.
,
and then press the OK button to confirm.
,
and then press the OK button to confirm.
,
and then press the OK button to confirm.
EQ setting Press the OK or
AVL
Press the
button to activate the EQ setting Menu.
button to select ON/OFF.
SPDIF
Audio Description Press OK or
button to enter the Audio description menu to set the
Audio mode to ON/OFF.
Sound Type Press the
button to cycle among sound type:stereo/Dual l/Dual ll/ Mixed.
New Zealand
2. Press
button to highlight country and mode options. Country
Mode
DTV
Country: Press the
button to select your country.
Start
Mode :Press the
button to cycle among the TV
mode: ATV/DTV/DTV+ATV.
Adjust
ATV mode: Select ATV to scan all available analogue
channels
and
store
them,
To
exist
the
tuning
menu
1.Press the evenlist button enter scheduled record
by setting
press Exit,
To skip
thealso
tuning
by press the
menu button.
lists,you
can
entermenu
the scheduled
record
listmode:
via press
the DTV
PVR button
PVR DTV
Settings,
DTV
Select
to scan to
allenter
available
channels and store them. To exist the tuning menu by
then
select
the the
scheduled
Record.
press
Exit,
To skip
tuning menu
by press the menu button
Press theSelect
OK button
to select
theall
following
ATV+DTV:
ATV+DTV
to scan
availableoptions.
DTV and ATV channels and store it. To exist the tuning
menu by press Exit, To skip the tuning menu by press the menu button
Frequency
Onec/Daily/Weekly/Weekday/off.
3. Press the Start button for Auto scan your service.
Press the
buttons to select
C
the channel.
4. Press the Menu button to return back to the main menu.
Press the
buttons to select the
press the number buttons on the remote to adjust the Hour and
5. Press the ExitYear/Month/Date,then
button to exit the menu.
Minutes ,then select save to finish the adjustment of the Start Time.
End Time
Press the
buttons to select the Year/Month/Date,then press the number buttons on
the remote to adjust the Hour and Minutes ,then select save to finish the adjustment of
the End Time.
Digital Manual Scan
1. Press the OK or button to enter Digital Manual
scan screen,select a channel number by press
the
button or using the number Buttons on the
USB
remote control.the Frequency
and Strength of the
signal indication bars are below,if the strength is too
weak, the TV may fail to tune into this channel.
then press the start to begin the search.
2. Press
Lock system
Lock
Lock System
USB
Lock options.
button to select the Manual scan mode.
Digital Manual Scan: Press ok or button to enter
Manual scan screen,select a channel number by
pressing the button or using the number buttons
on the remote control,then press the start to begin
the search. To exit the tuning menu by press Exit.
Analog Manual Scan: Press ok or button to enter Analog Manual scan screen.
then press the
button to select the following options.
Analog Scan: Input the channel frequency by using the number buttons on the remote control.
Channel to save: Store the current channel
Start: Press this button to begin the search.,and press the Exist button to exit the tuning menu.
3.Press the Menu button to return back to the mani menu.
Supported
fileexit
formats
and decoder is as follow:
4.Press the Exit
button to
the Menu.
format
ChannelFileedit
Decoder
Video
Audio
MPEG-1/MPEG-2 MP/MPEG-4 SP/MPEG-4
1. Press AVI
OK or button
enter
Channel edit Menu .
ASP/MPEG-4 to
XVID/H.264
MP@Level
4/H.264 HP@Level 4
MPEG-1
2.
MPEG edit MPEG-1 MP/MPEG-2 MP
MPEG4
TS
MKV
FLV
Layer2/MPEG-1
Layer3/MPEG-2
Layer3/AC -3/AACMPEG-1/MPEG-2 MP/H.264 MP@Level 4/H.264 LC/HE-AAC V1/HE-AAC
HP@Level 4
V2
MPEG-1/MPEG-2 MP/MPEG-4 SP/MPEG-4
ASP/MPEG-4 XVID/H.264 MP@Level 4/H.264
HP@Level 4
MPEG-4 SP/MPEG-4 ASP/MPEG-4 XVID/H.264
MP@Level 4/H.264 HP@Level 4
H.264 MP@Level 4/H.264 HP@Level 4
Play/Prev./
Next/FB/FF/Plause.
press the blue button to enter the Quick Menu.
Signal Information
Press the OK or button to see the detail information about the signal. Only available when there is
signal on DTV mode.
Enable:
press the
button to view Pre./Next
page,press the number button on the remote
control to view the page directly,
pressedit
the
channel
button to view the Pre./Next text file.press the
blue button to enter the Quick Menu.
button to select channel Locks,then press OK or button to enter sub-menu.
Channel Locks: Press
to lock channel according to then instruction.
Only supported TXT format.
Rating: No block: Turn off parental lock.
Block G+ - Block All+: Turn on Parental Lock and set the parental rating level to show
programs below the level, while a password controls access to higher-level programs.
Press the
button to select the Parental Rating,
then press the
button to select No Block / Block G+.../Block ALL+.
Lock Keypad: Set to prevent it from being used by your children, or other unexpected usage.
If this folder also contains music files,you can select a music to play on music menu,
Press the
button to select Lock Keypad, then press the
button to select ON/OFF
then back to view your text, so that you can listen to the music at the same time
Press the
button to select Hotel mode ,then
or
New password: Use the 0-9 button to input 4-digit as the new password, then repeat the 4-digit to confirm
the new password.
Clear Lock: Press the
button to select Clear lock ,then Press ok or
button to clear the Lock.
OK
USB
USB
First time setup:
Press ok or button to activate the first time setup menu.
OSD language: Press the
button to select the menu language.
Reset:
Press ok or
Audio Language: Press the OK or button to select the Audio language sub-menu
to select the Audio language.
button to select the factory reset item, then select the YES to set.
Subtitle:
Press
the
OK orto display
button the
to enter
sub-menu
Press the
Info
button
function
bar, to select the subtitle language.
press the ok to play/pause the picture,
press the
button to rotate the picture when the
Teletext:Press the OK or button to enter teletext menu to adjust telext settings
picture in pause condition,press the
button to
( Only
available
on ATV and
DTV
mode)
view the
Pre./Next
picture.press
the
blue
button to
enter the Quick Menu.
Blue screen : Press the
Supported file formats: MP3/AAC/M4A/WAV.
Supported Audio decoder:MPEG-1 layer3/MPEG-2
layer3 /AAC/HE-AAC V1/HE-AAC V2/LPCM/ADPCM
button to select ON/OFF.
Mode setting: Press the
button to select store mode /home mode.
If this folder also contains music files,you can select a music
to play on music menu, then back to view your photo,
so that youthe
canOK
listen
the music
at theTime
same
time while
viewing
yourthe
photo.
Time settings:Press
or tobutton
to enter
Setting
menu.,and
select
following time
setup options.
OSD Time:
30s/60s/off.
Sleep Timer:
/5/15/...120/240
Auto Sleep:
/ button on TV unit were
3,4
5
If you want to cancel the Auto sleep when the reminder screen pop up,
press any buttons can cancel it.
Time Zone: Press OK or
button to enter the region menu, select your region and confirm it by
press OK button.
Time: Press OK or
button to enter the Time menu to adjust the time.
Play/Prev./Next/FB/FF/Plause.
press the blue button to enter the Quick Menu.
USB
OK
USB
USB
First time setup:
Press ok or button to activate the first time setup menu.
OSD language: Press the
button to select the menu language.
Reset:
Press ok or
Audio Language: Press the OK or button to select the Audio language sub-menu
to select the Audio language.
button to select the factory reset item, then select the YES to set.
Subtitle:
Press
the
OK orto display
button the
to enter
sub-menu
Press the
Info
button
function
bar, to select the subtitle language.
press the ok to play/pause the picture,
press the
button to rotate the picture when the
Teletext:Press the OK or button to enter teletext menu to adjust telext settings
picture in pause condition,press the
button to
( Only
available
on ATV and
DTV
mode)
view the
Pre./Next
picture.press
the
blue
button to
enter the Quick Menu.
Blue screen : Press the
Supported file formats: MP3/AAC/M4A/WAV.
Supported Audio decoder:MPEG-1 layer3/MPEG-2
layer3 /AAC/HE-AAC V1/HE-AAC V2/LPCM/ADPCM
button to select ON/OFF.
Mode setting: Press the
button to select store mode /home mode.
If this folder also contains music files,you can select a music
to play on music menu, then back to view your photo,
so that youthe
canOK
listen
the music
at theTime
same
time while
viewing
yourthe
photo.
Time settings:Press
or tobutton
to enter
Setting
menu.,and
select
following time
setup options.
OSD Time:
30s/60s/off.
Sleep Timer:
/5/15/...120/240
Auto Sleep:
/ button on TV unit were
3,4
5
If you want to cancel the Auto sleep when the reminder screen pop up,
press any buttons can cancel it.
Time Zone: Press OK or
button to enter the region menu, select your region and confirm it by
press OK button.
Time: Press OK or
button to enter the Time menu to adjust the time.
Play/Prev./Next/FB/FF/Plause.
press the blue button to enter the Quick Menu.
Digital Manual Scan
1. Press the OK or button to enter Digital Manual
scan screen,select a channel number by press
the
button or using the number Buttons on the
USB
remote control.the Frequency
and Strength of the
signal indication bars are below,if the strength is too
weak, the TV may fail to tune into this channel.
then press the start to begin the search.
2. Press
Lock system
Lock
Lock System
USB
Lock options.
button to select the Manual scan mode.
Digital Manual Scan: Press ok or button to enter
Manual scan screen,select a channel number by
pressing the button or using the number buttons
on the remote control,then press the start to begin
the search. To exit the tuning menu by press Exit.
Analog Manual Scan: Press ok or button to enter Analog Manual scan screen.
then press the
button to select the following options.
Analog Scan: Input the channel frequency by using the number buttons on the remote control.
Channel to save: Store the current channel
Start: Press this button to begin the search.,and press the Exist button to exit the tuning menu.
3.Press the Menu button to return back to the mani menu.
Supported
fileexit
formats
and decoder is as follow:
4.Press the Exit
button to
the Menu.
format
ChannelFileedit
Decoder
Video
Audio
MPEG-1/MPEG-2 MP/MPEG-4 SP/MPEG-4
1. Press AVI
OK or button
enter
Channel edit Menu .
ASP/MPEG-4 to
XVID/H.264
MP@Level
4/H.264 HP@Level 4
MPEG-1
2.
MPEG edit MPEG-1 MP/MPEG-2 MP
MPEG4
TS
MKV
FLV
Layer2/MPEG-1
Layer3/MPEG-2
Layer3/AC -3/AACMPEG-1/MPEG-2 MP/H.264 MP@Level 4/H.264 LC/HE-AAC V1/HE-AAC
HP@Level 4
V2
MPEG-1/MPEG-2 MP/MPEG-4 SP/MPEG-4
ASP/MPEG-4 XVID/H.264 MP@Level 4/H.264
HP@Level 4
MPEG-4 SP/MPEG-4 ASP/MPEG-4 XVID/H.264
MP@Level 4/H.264 HP@Level 4
H.264 MP@Level 4/H.264 HP@Level 4
Play/Prev./
Next/FB/FF/Plause.
press the blue button to enter the Quick Menu.
Signal Information
Press the OK or button to see the detail information about the signal. Only available when there is
signal on DTV mode.
Enable:
press the
button to view Pre./Next
page,press the number button on the remote
control to view the page directly,
pressedit
the
channel
button to view the Pre./Next text file.press the
blue button to enter the Quick Menu.
button to select channel Locks,then press OK or button to enter sub-menu.
Channel Locks: Press
to lock channel according to then instruction.
Only supported TXT format.
Rating: No block: Turn off parental lock.
Block G+ - Block All+: Turn on Parental Lock and set the parental rating level to show
programs below the level, while a password controls access to higher-level programs.
Press the
button to select the Parental Rating,
then press the
button to select No Block / Block G+.../Block ALL+.
Lock Keypad: Set to prevent it from being used by your children, or other unexpected usage.
If this folder also contains music files,you can select a music to play on music menu,
Press the
button to select Lock Keypad, then press the
button to select ON/OFF
then back to view your text, so that you can listen to the music at the same time
Press the
button to select Hotel mode ,then
or
New password: Use the 0-9 button to input 4-digit as the new password, then repeat the 4-digit to confirm
the new password.
Clear Lock: Press the
button to select Clear lock ,then Press ok or
button to clear the Lock.
Auto Scan
Personal
To select auto scan mode ( DTV/ATV/ DTV+ATV)
1. Press OK or
button to enter Auto scan Menu .
Auto Scan
Press the
button to display time shift bar.
,
and then press the OK button to confirm.
,
and then press the OK button to confirm.
,
and then press the OK button to confirm.
EQ setting Press the OK or
AVL
Press the
button to activate the EQ setting Menu.
button to select ON/OFF.
SPDIF
Audio Description Press OK or
button to enter the Audio description menu to set the
Audio mode to ON/OFF.
Sound Type Press the
button to cycle among sound type:stereo/Dual l/Dual ll/ Mixed.
New Zealand
2. Press
button to highlight country and mode options. Country
Mode
DTV
Country: Press the
button to select your country.
Start
Mode :Press the
button to cycle among the TV
mode: ATV/DTV/DTV+ATV.
Adjust
ATV mode: Select ATV to scan all available analogue
channels
and
store
them,
To
exist
the
tuning
menu
1.Press the evenlist button enter scheduled record
by setting
press Exit,
To skip
thealso
tuning
by press the
menu button.
lists,you
can
entermenu
the scheduled
record
listmode:
via press
the DTV
PVR button
PVR DTV
Settings,
DTV
Select
to scan to
allenter
available
channels and store them. To exist the tuning menu by
then
select
the the
scheduled
Record.
press
Exit,
To skip
tuning menu
by press the menu button
Press theSelect
OK button
to select
theall
following
ATV+DTV:
ATV+DTV
to scan
availableoptions.
DTV and ATV channels and store it. To exist the tuning
menu by press Exit, To skip the tuning menu by press the menu button
Frequency
Onec/Daily/Weekly/Weekday/off.
3. Press the Start button for Auto scan your service.
Press the
buttons to select
C
the channel.
4. Press the Menu button to return back to the main menu.
Press the
buttons to select the
press the number buttons on the remote to adjust the Hour and
5. Press the ExitYear/Month/Date,then
button to exit the menu.
Minutes ,then select save to finish the adjustment of the Start Time.
End Time
Press the
buttons to select the Year/Month/Date,then press the number buttons on
the remote to adjust the Hour and Minutes ,then select save to finish the adjustment of
the End Time.
Personal
FULL
,
and then press the OK button to confirm.
,
and then press the OK button to confirm.
, and then press the OK button to confirm.
Saturation
and then press the OK button to confirm.
Hue
and then press the OK button to confirm.
Hue
,
,
Advanced Settings Press OK button or button to
activate the advaned setting
menu.
NR: Press the
button to
select the NR mode from
Medium/Strong/off/Weak.
MEPG NR: Press the
button
to select the MEPG NR mode from
Medium/Strong/off/Weak.
Dynamic Contrast: Press the
button to select the Dynamic
Contrast: mode from Medium/
Strong/off/Weak.
PC setting Press the
button to select PC settings option,then press the OK or button to enter the
sub menu to set (O nly available on PC mode)
SOURCE
1
2
Enter the master password “8888”in the Lock system,
then select clear lock option to clear your previous password .
3
USB
YPbPr
1
2
3
USB
21
If this is the first time you are turning on the TV and there are no programs in the TV memory,
The First time setup menu will appear on the screen, press the
button to select the
following options to finish the first time setup.
1. OSD language : Select your language.
2.Mode setting
:Select the TV mode.
3.Country : Select your country
4.Autoscan : Select your TV service.
5.LCN : Set the LCN to ON/OFF.
Ensure your aerial , cable or dish is plugged in to the TV ,then select the start option and
press OK button , the TV will start to install the service you have selected.
/Dot to Dot/Full
1920 x 1080
BP4820FHD
48"
300
5000:1
MAX 120W
VIDEO
R
L
293k Wh
6
7W+7W
1095.9x92.1x641.4mm
1095.9x250x683.2mm
13.6
3
MUTE
Press this button for mute sound,
press this button again for resume
audio listening
Freeze press this button to hold the
picture,press again for cancel hold.
Lock System
Use in Text ,DTV and TV
Press this button to view the detail
information of the signal in ATV/DTV
mode
Press this button to select
the picture mode directly
Press this button to select the sound
mode directly
Rec Start to record
Back to Firsttime
setup menu
USB
Stop
Evenlist Enter the scheduled
recording list.
D-Setup Enter the DVD setup menu
(Not used on this Mode).
Select your favourite program.
DVD Eject (Not used on this Mode).
Nicam key
Pause/Play/Timeshift
Remote Code:807F
OUT
COAXIAL
USB IN
L
Y
Pb/Cb
COMPONENT IN
Pr/Cr
AUDIO
PC IN
VGA
RF IN
HDMI1 HDMI2 HDMI3
R
AV IN
OUT
VIDEO
COAXIAL
RF IN
For more information and Customer support visit:
www.blaupunkt-australia.com.au
Download PDF