A'dor DK1 Door Knocker Installation Instructions
Below you will find brief information for Door Knocker DK1. The DK1 is a door knocker for use on exterior or interior doors. The instructions will show you how to install it. Instructions are given for drilling holes with a 1/4'' drill bit and mounting it with screws and cover washers.
advertisement
◉
Touch to zoom
TEMPLATE DRAWING A 1/4" DOOR KNOCKER For use on exterior or interior doors. Polish with a soft cloth. Do not use abrasive waxes or cleaners. INSTALLATION INSTRUCTIONS TOOLS REQUIRED: Drill,1/4" drill bit,pencil and screwdriver. 1. Position template centered from side to side at desired height. 2. Tape template to outside of door. 3. Mark centers and drill holes (A) with 1/4" drill bit completely through the door. 4. Mount door knockers with screws and cover washers. ALDABA RARA PUERTA para uso en puertas exteriors e interiors. Limpie con un trapo suave. No utilice limpiadores o ceras con productos abrasivos. 512" INSTRUCCIONES PARA LA INSTALACION HERRAMIENTAS NECESARIAS: Taladro,punta de taladro de 1/4" , lapiz,destornilador. 1. Coloque la plantilla centrada de lado a lado a la altura deseada. 2. Pegue con cinta adhesiva la plantilla a la parte externa de la puerta. 3. Marque los centros y perfore los agujeros(A)con el taladro de 1/4" a traves de toda la puerta. 4. Monte la aldaba con tornillos y ponga las rondanas para cubrirlos. A 1/4" DK1 DOOR KNOCKER A'DOR DWG# : DK1 Rev.A 210 Redstone Hill Rood Bristol, CT 06010 PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn MAT'L : BRASS DATE : 4/19/10
advertisement
Key Features
- For exterior or interior doors
- Polish with a soft cloth
- 1/4" drill bit
- Screws and cover washers
Frequently Answers and Questions
How do I install the door knocker?
Position the template centered from side to side at the desired height. Tape the template to the outside of the door. Mark the centers and drill holes (A) with a 1/4" drill bit completely through the door. Mount the door knocker with screws and cover washers.
What tools do I need to install the door knocker?
You will need a drill with a 1/4" drill bit , a pencil and a screwdriver.
What type of door can I use the door knocker on?
The door knocker can be used on both exterior and interior doors.
Related manuals
Download
PDF
advertisement
