PRODUCT SPECIFICATION camera solutions Spectra® IV SE Series Dome Systems PREMIER INTEGRATED DOME SYSTEM Product Features • 2 Autofocus, High Resolution Integrated Camera/Optics Packages; Multiple Back Box Models • Day/Night, 540 TVL, 128X Wide Dynamic Range (WDR), Motion Detection, and Electronic Image Stabilization (SD436 Series) • Day/Night, 540 TVL, 128X Wide Dynamic Range (WDR), and Motion Detection (SD429 Series) • Autotracking • Window Blanking IN-CEILING MODEL SD436-F0 PENDANT MODEL SD429-PG-0 • Camera Title Overlay, 20 User-Definable Characters • Horizontal and Zone Blanking • On-Screen Compass and Tilt Display • Password Protection • Low Lux Noise Reduction • Sure Focus • Integrated Passive Unshielded Twisted Pair (UTP) Circuit • Internal Scheduling Clock • Built-in Surge and Limited Lightning Protection • Ability to Add IP Network Capability by Purchasing Optional TXB-N Module Modularity Lower Dome Spectra® IV SE was designed with ease of installation and ease of maintenance in mind. Each dome system consists of three components: a back box, a dome drive, and a lower dome. These three system components are interchangeable with other Spectra IV SE dome systems, making retrofitting and application adjustments simple. Also, dome drives and lower domes can be removed and replaced reducing maintenance time. Special consideration was taken when designing the Spectra IV SE lower dome bubble to ensure that an optimal optical relationship between the lens and bubble was achieved, providing crystal clear video at long focal lengths. Back Box Spectra IV SE back box options include the following models: environmental in-ceiling (ideal for outdoor soffits), indoor in-ceiling, indoor surface mount, and standard and environmental pendant. The Spectra IV SE Series can also be ordered with heavy-duty, pressurized, and stainless steel back box options (refer to the appropriate product specification sheets for more information). Each back box model features built-in back box memory to store camera and location-specific dome settings, including labels, presets, patterns, and zones. A passive UTP circuit is located on the door assembly for convenient video transmission through twisted pair wire. For added flexibility, Pelco fiber modules can also be attached to the door assembly for transmission over single-mode or multimode fiber. Dome Drive The Spectra IV SE dome drive’s unique integrated optics package incorporates many advanced features that allow the system to produce high quality video in the most difficult environments. All cameras in Spectra IV SE dome drives feature LowLight ™ technology allowing the cameras to compensate for scenes where minimal light is present. Both the 29X and the 36X cameras feature built-in motion detection and advanced 128X WDR that enables the system to compensate for scenes where dramatic contrasts in lighting are present. The 36X day/night camera electronic image stabilization digitally reduces blurring of the camera image due to vibration caused by external sources, such as wind and traffic. Auto sharpness enhances picture detail by increasing the aperture gain of the camera and sharpening the edges in the picture. Dome Systems Spectra IV SE dome systems feature many software enhancements that increase performance and make configuration and operation easy. An internal scheduling clock allows for the scheduling of presets and patterns. Window blanking enables a user to configure up to eight, four-sided, user-defined privacy areas. Password protection prevents unauthorized users from changing the system settings. Configurable on-screen compass and tilt display provides positioning information when needed. Intuitive multilingual on-screen menus can be displayed in English, Spanish, Portuguese, Italian, French, German, Russian, Polish, Turkish, and Czech. Spectra IV SE’s variable speed capabilities range from a smooth, fast pan motion of 400 degrees per second to a smooth “creep” speed of 0.1 degree per second. The system is capable of continuous 360 degrees rotation and has an “auto flip” feature that allows the dome to rotate 180 degrees and reposition itself for uninterrupted viewing of any subject that passes directly beneath the dome. In addition, with the optional Pelco TXB-N module, you can add IP network capability at any time to a Spectra IV dome system without losing analog viewing and control. By snapping the TXB-N module into the back box, you can stream network video to a Web browser, Endura®, Digital Sentry®, or third-party software recording solution allowing integration into virtually any IP-based system. International Standards Organization Registered Firm; ISO 9001 Quality System C2448 / REVISED 12-21-12 TECHNICAL SPECIFICATIONS CAMERA/OPTICS Day/Night (36X) Day/Night (29X) Signal Format NTSC (DD436) PAL (DD436-X) NTSC (DD429) PAL (DD429-X) Scanning System 2:1 Interlace 2:1 Interlace Image Sensor Effective Pixels NTSC PAL 1/4-inch EXview HAD™ 1/4-inch EXview HAD 768 (H) X 494 (V) 752 (H) X 582 (V) 768 (H) X 494 (V) 752 (H) X 582 (V) Horizontal Resolution NTSC PAL >540 TV Lines >540 TV Lines >540 TV Lines >540 TV Lines f/1.4 (focal length, 3.4 ~ 98.6 mm) Lens f/1.4 (focal length, 3.3 ~ 119 mm) Zoom 36X optical, 12X digital 29X optical, 12X digital Zoom Speed (optical range) 3.2/4.6/6.6 seconds 3.2/4.6/6.6 seconds Horizontal Angle of view Focus 57.2° at 3.3 mm wide zoom; 1.7° at 119 mm telephoto zoom Automatic with manual override 55.8° at 3.4 mm wide zoom; 1.7° at 98.6 mm telephoto zoom Automatic with manual override 0.55 lux at 1/60 sec (color) 0.018 lux at 1/2 sec (color) 0.00018 lux at 1/2 sec (B-W) 0.55 lux at 1/60 sec (color) 0.018 lux at 1/2 sec (color) 0.00018 lux at 1/2 sec (B-W) 0.45 lux at 1/50 sec (color) 0.015 lux at 1/1.5 sec (color) 0.00015 lux at 1/1.5 sec (B-W) 0.45 lux at 1/50 sec (color) 0.015 lux at 1/1.5 sec (color) 0.00015 lux at 1/1.5 sec (B-W) Maximum Sensitivity at 35 IRE NTSC/EIA PAL/CCIR Sync System Internal/AC line lock, phase adjustable using remote control, Internal/AC line lock, phase adjustable using remote control, V-Sync V-Sync White Balance Automatic with manual override Automatic with manual override Shutter Speed NTSC PAL Automatic (electronic iris)/Manual 1/2 ~ 1/30,000 1/1.5 ~ 1/30,000 Automatic (electronic iris)/Manual 1/2 ~ 1/30,000 1/1.5 ~ 1/30,000 Automatic iris control with manual override Iris Control Automatic iris control with manual override Gain Control Automatic/OFF Automatic/OFF Video Output 1 Vp-p, 75 ohms 1 Vp-p, 75 ohms Video Signal-to-Noise >50 dB >50 dB Wide Dynamic Range 128X 128X Electronic Image Stabilization Integrated/Selectable — Auto Sharpness Integrated/Selectable Integrated/Selectable TECHNICAL SPECIFICATIONS DOME DRIVE FEATURES • 256 Presets • ±0.1° Preset Accuracy • Electronic Image Stabilization (36X model) • Image Enhancement (36X model) • Multilingual Menus (English, Spanish, Portuguese, Italian, French, German, Russian, Polish, Turkish, and Czech) • RJ-45 Data Port for Software Update and Setup • On-Screen Compass, Tilt, and Zoom Display • Resume After Alarm: Allows the Dome to Return to a Previously Configured State After Alarm Acknowledgement or to its Previous Position Before Alarm • Multiple Park and Power-Up Action • Patterns: Up to 8, On-Screen, User-Defined Configurable Patterns; Includes Pan, Tilt, Zoom, and Preset Functions • Proportional Pan/Tilt: Continually Decreases Pan/Tilt Speeds in Proportion to Depth of Zoom • 400°/sec Pan Preset Speed and 200°/sec Tilt Preset Speed • Variable Scan Speed: Scan Speed Can Be Configurable Between 1 to 40°/sec • Rotating Discreet Liner with Sealed Fixed Bubble • Pan Motion Allows 0.1 to 150°/sec Pan Speed • Window Blanking: Up to 8, Four-Sided, User-Defined Shapes • Configurable Limit Stops for Auto/Random/Frame Scan Modes • 8 Zones (configurable in size) Can Be Labeled with up to 20 Characters Each or Set to Output Blank Video • Autosensing Protocol (Coaxitron®, RS-422 Pelco P and Pelco D, Sensormatic®, Vicon®); Accepts Other Control Protocols with Optional Translator Card • 7 Alarm Inputs • 1 Auxiliary (Form C) Relay Output and 1 Open Collector Auxiliary Output (can be alternately configured to operate upon alarm) • Digital Position and Zoom Control and Feedback through Pelco D Protocol • Configurable Locations of Labels and On-Screen Displays • “Auto Flip” Rotates Dome 180° at Bottom of Tilt Travel • Action on Alarm: Alarms Can Be Individually Configured for 3 Priority Levels, to Initiate a Stored Pattern, or to Go to an Associated Preset When Received • Configurable Zoom Speeds • Low Lux Noise Reduction (reduces noise in low light) • Built-in Menu System for Setup of Configurable Functions WINDOW BLANKING WIDE DYNAMIC RANGE Window blanking allows a user to configure up to eight, four-sided, user-defined areas that cannot be viewed by the operator of the dome system. A blanked area will move with pan and tilt functions and automatically adjust in size as the lens zooms telephoto and wide. The WDR setting balances the brightest and darkest sections of a scene to produce a picture that provides more detail. BEFORE AFTER BEFORE AFTER TECHNICAL SPECIFICATIONS BACK BOX FEATURES 7.6 (19.3) 1.6 (4.0) Surface Mount (Indoor) • Built-in Memory Stores Camera/Dome Settings • Available in Black or White Finish 8.7 (22.0) • Quick Disconnect to Dome Drive • Injection-Molded Plastic • Integrated Passive UTP 5.9 (15.0) 7.5 (19.0) In-Ceiling (Indoor) • Built-in Memory Stores Camera/Dome Settings • Single Back Box for Suspended or Hard Ceiling Applications 5.2 (13.2) • Requires 5.25-Inch Space Above Ceiling and 3.25 Inches Below • Minimum Ceiling Thickness 0.5-Inch; Maximum 1.75 Inches • Quick Disconnect to Dome Drive 3.5 (8.8) • Aluminum Construction • Suitable for Use in Environmental Air Handling Spaces 5.9 (15.0) • Integrated Passive UTP 8.2 (20.8) 9.9 (25.2) Environmental In-Ceiling • Built-in Memory Stores Camera/Dome Settings • Single Back Box for Hard Ceiling Applications 4.4 (11.0) • Requires 4.4-Inch Space Above Ceiling and 4.3 Inches Below • Includes Heater and Fan • Minimum Ceiling Thickness 0.5-Inch; Maximum 1.75 Inches 4.3 (10.9) • Quick Disconnect to Dome Drive 5.9 (15.0) 8.6 (21.8) • Aluminum Construction • Integrated Passive UTP Standard and Environmental Pendant • Standard and Environmental Models • Built-in Memory Stores Camera/Dome Settings • Standard Pendant Available in Black or Gray Finish; Environmental Pendant Gray Finish Only 10.6 (26.9) • Quick Disconnect to Dome Drive • Aluminum Construction (ENVIRONMENTAL DOME WITH SUN SHROUD SHOWN) 5.9 (15.0) • Environmental Model Includes Sun Shield, Fan, and Heater 8.6 (21.8) • Integrated Passive UTP NOTE: VALUES IN PARENTHESES ARE CENTIMETERS; ALL OTHERS ARE INCHES. Note: The Spectra IV SE Series can be ordered with heavy-duty, pressurized, and stainless steel back box options. Refer to the appropriate product specification sheets for more information. TECHNICAL SPECIFICATIONS MECHANICAL (Dome Drive Only) GENERAL Pan Movement Vertical Tilt Manual Pan/Tilt Speeds Pan Construction Back Box Surface Mount In-Ceiling Pendant Dome Drive Bubble Light Attenuation Smoked Clear Cable Entry (Back Box) In-Ceiling and Surface Mount Pendant Weight (approximate) Back Box Surface Mount In-Ceiling Environmental In-Ceiling Standard Pendant Environmental Pendant Dome Drive Lower Dome Surface Mount In-Ceiling Pendant and Environmental In-Ceiling Environment Surface Mount In-Ceiling Environmental In-Ceiling Pendant, Standard and Environmental Operating Temperature Surface Mount and Indoor In-Ceiling Standard Pendant Maximum Tilt Preset Speeds Pan Tilt 360° continuous pan rotation Unobstructed +2° to –92° 0.1° to 80°/sec manual operation, 150°/sec Turbo 0.1° to 40°/sec manual operation 400°/sec 200°/sec For variable-speed operation, an appropriate controller is required (with nonvariable speed control, Spectra IV SE pan/tilt speed is 20°/sec) ELECTRICAL Input Voltage Input Power 24 VAC 24 VDC Fuse Auxiliary Outputs Alarm Inputs 18 to 32 VAC; 24 VAC nominal 22 to 27 VDC; 24 VDC nominal 23 VA nominal (without heater); 73 VA nominal (with heater) 0.7 A nominal (without heater); 3 A nominal (with heater) 1.25 A 2 7 CERTIFICATIONS/RATINGS/PATENTS • • • • • • CE, Class B FCC, Class B UL/cUL Listed C-Tick S Mark for Argentina Meets NEMA Type 4X, IP66 when installed properly (BB4-F-E, BB4-PB, BB4-PG, and BB4-PG-E) • Meets NEMA Type 1, IP40 (BB4-SMW, BB4-SMB, and BB4-F) • U.S. Patents 5,931,432; 6,793,415 B2; 6,802,656 B2; 6,821,222 B2; 7,161,615 B2 Minimum Environmental In-Ceiling and Environmental Pendant Maximum Minimum TS2 Plastic Aluminum Aluminum Aluminum, thermo plastic Acrylic f/0.5 light loss Zero light loss 0.75-inch conduit fitting Through 1.5-inch NPT pendant mount Shipping Unit 0.7 lb (0.32 kg) 1.5 lb (0.68 kg) 2 lb (0.90 kg) 2 lb (0.90 kg) 2.1 lb 2.4 lb 3.5 lb 3.3 lb 3 lb 4 lb 5 lb 5 lb (0.95 kg) (1.09 kg) (1.59 kg) (1.48 kg) (1.36 kg) (1.81 kg) (2.27 kg) (2.27 kg) 0.4 lb (0.18 kg) 0.2 lb (0.09 kg) 1 lb (0.45 kg) 1 lb (0.45 kg) 0.6 lb (0.27 kg) 2 lb (0.90 kg) Indoor Indoor Outdoor Indoor/outdoor 0° to 50°C (32° to 122°F) (Assumes no wind chill factor) 45°C (113°F) absolute maximum; 35°C (95°F) sustained maximum –4°C (25°F) sustained minimum (Assumes no wind chill factor) 60°C (140°F) absolute maximum; 50°C (122°F) sustained maximum –51°C (–60°F) absolute minimum; prevents icing at sustained minimum of –45°C (–50°F); de-ices 2.5 mm (0.1 inch) within 3 hours after power-up –34° to 74°C (–29.2° to 165°F) Per NEMA TS2, para. 22.214.171.124, using fig. 2.1 test profile Effective Projected Area (EPA) 52.07 square cm (20.5 square inches), without mount (47 square inches), with IWM Series mount RELATED PRODUCTS OPTIONAL ACCESSORIES DD5-FM Fixed camera mount adapter. Interchangeable with all Spectra IV dome drives. IPS-CABLE Remote monitor cable and software kit consisting of the Spectra IV remote monitor interface cable and necessary software for use with a PC. Refer to www.pelco.com for a list of compatible devices. IPS-RDPE-2* Remote data port. 24 VAC, wall/pole mount video/data breakout box. Allows ground-level control/configuration and software upgrades when used with the IPS-CABLE. TXB Series* Translator boards for AD™ Manchester, Hernis, Bosch® (Philips, Burle), TASS, and NTCIP protocols. TXB-N Series* Network-based communication module that allows you to control and monitor Spectra IV dome systems over an IP network (in-ceiling and pendant models only). When TXB-N is installed in the camera’s back box, the camera system supports Web and Endura connectivity, and open architecture connectivity to third-party software. TXB-N allows simultaneous access to the camera from both an analog and IP-based control point. FS85011A* Fiber transmitter sends 1 unidirectional composite video channel and 1 bidirectional data channel over 1 multimode or singlemode fiber optical cable. LD5F-2† Flush in-ceiling lower dome with chrome bubble (f/2.0 light loss). LD5F-3† Flush in-ceiling lower dome with gold bubble (f/2.0 light loss). LD53PB-2† Pendant lower dome with black trim and chrome bubble (f/2.0 light loss). LD53PB-3† Pendant lower dome with black trim and gold bubble (f/2.0 light loss). *If TXB or FS85011A boards are installed, remote upload of system software will not be possible. † Not recommended for outdoor use due to possible light reflections. RELATED PRODUCTS RECOMMENDED MOUNTS RECOMMENDED POWER SUPPLIES Surface Mount Domes PASMB MCS Series WCS Series SD53SM-P In-Ceiling Domes SD5-P SCA1 Pendant adapter for surface mount dome, black 2' x 2' drop ceiling panel for BB4-SMW and BB4T-SMW series back boxes; replaces 2' x 2' ceiling tile; aluminum construction 2' x 2' drop ceiling panel, aluminum construction; replaces 2' x 2' ceiling tile Support rails for BB4-F; for use in ceiling tile applications Pendant Domes BB5-PCA-BK* Pendant conduit adapter, black BB5-PCA-GY* Pendant conduit adapter, gray IWM Series Wall mount, with or without integral 24 VAC, 100 VA transformer; black or gray finish; can be adapted for corner, parapet, or pole applications MRCA Ceiling mount, black PP4348 Parapet roof mount PP350/PP351 Parapet wall/roof mount SWM Series Compact wall mount, black or gray finish; can be adapted for corner or pole applications *Not suitable for use with heavy-duty, pressurized, or stainless steel Spectra domes. Indoor, 24 VAC power supply Outdoor, 24 VAC power supply Refer to individual power supply specifications for more information. SYSTEM AND COMPONENT MODELS SYSTEM MODEL NUMBERS Type Surface Mount Back Box Color Lower Dome White Smoked SD436-SMW-0 SD436-SMW-0-X SD429-SMW-0 Clear SD436-SMW-1 SD436-SMW-1-X SD429-SMW-1 SD429-SMW-1-X Smoked SD436-SMB-0 SD436-SMB-0-X SD429-SMB-0 SD429-SMB-0-X Clear SD436-SMB-1 SD436-SMB-1-X SD429-SMB-1 SD429-SMB-1-X Black In-Ceiling, Indoor Black In-Ceiling, Environmental* Pendant, Standard Black Black Light Gray Pendant, Environmental* Light Gray 36X Day/Night (NTSC) 36X Day/Night (PAL) 29X Day/Night (NTSC) 29X Day/Night (PAL) SD429-SMW-0-X Smoked SD436-F0 SD436-F0-X SD429-F0 SD429-F0-X Clear SD436-F1 SD436-F1-X SD429-F1 SD429-F1-X SD429-F-E0-X Smoked SD436-F-E0 SD436-F-E0-X SD429-F-E0 Clear SD436-F-E1 SD436-F-E1-X SD429-F-E1 SD429-F-E1-X Smoked SD436-PB-0 SD436-PB-0-X SD429-PB-0 SD429-PB-0-X Clear SD436-PB-1 SD436-PB-1-X SD429-PB-1 SD429-PB-1-X Smoked SD436-PG-0 SD436-PG-0-X SD429-PG-0 SD429-PG-0-X Clear SD436-PG-1 SD436-PG-1-X SD429-PG-1 SD429-PG-1-X Smoked SD436-PG-E0 SD436-PG-E0-X SD429-PG-E0 SD429-PG-E0-X Clear SD436-PG-E1 SD436-PG-E1-X SD429-PG-E1 SD429-PG-E1-X COMPONENT MODEL NUMBERS Back Box BB4-SMB BB4-SMW BB4-F BB4-F-E BB4-PB BB4-PG BB4-PG-E Surface mount, black Surface mount, white In-ceiling, black In-ceiling, black, environmental Pendant mount, black, standard Pendant mount, gray, standard Pendant mount, gray, environmental Lower Dome† Dome Drive DD429 DD429-X DD436 DD436-X DD5-FM Day/Night (NTSC) camera (29X) Day/Night (PAL) camera (29X) Day/Night (NTSC) camera (36X) Day/Night (PAL) camera (36X) Removable, fixed mount bracket only (camera and lens not included); interchangeable with all Spectra IV dome drives LD53SMB-0 LD53SMB-1 LD53SMW-0 LD53SMW-1 LDHQF-0 LDHQF-1 LDHQPB-0 LDHQPB-1 Smoked, surface, black Clear, surface, black Smoked, surface, white Clear, surface, white Smoked, in-ceiling Clear, in-ceiling Smoked, pendant, black Clear, pendant, black Notes: To order a fixed mount dome system, refer to the component models above and select one each of the following options: back box (BB4-F), dome drive (DD5-FM), plus choice of lower dome (LDHQF-0, LDHQF-1). For environmental applications, you must order an environmental back box (BB4-F-E or BB4-PG-E). DD5-FM accepts camera and lens combinations including a BNC connector up to 12.70 x 6.99 x 6.99 cm (5.00" D x 2.75" W x 2.75" H). *Environmental dome systems include a heater and a fan, and the environmental pendant also includes a sun shield. †Use the pendant lower domes with the environmental in-ceiling and environmental pendant back boxes. Pelco by Schneider Electric 3500 Pelco Way, Clovis, California 93612-5699 United States USA & Canada Tel (800) 289-9100 Fax (800) 289-9150 International Tel +1 (559) 292-1981 Fax +1 (559) 348-1120 www.pelco.com www.pelco.com/community Pelco, the Pelco logo, and other trademarks associated with Pelco products referred to in this publication are trademarks of Pelco, Inc. or its affiliates. ONVIF and the ONVIF logo are trademarks of ONVIF Inc. All other product names and services are the property of their respective companies. Product specifications and availability are subject to change without notice. ©Copyright 2012, Pelco, Inc. All rights reserved.