Designed, Manufactured and Supported in the USA

VIKING PRODUCT MANUAL

C O M M U N I C A T I O N & S E C U R I T Y S O L U T I O N S

C-200

Basic Single Entry

Phone Interface

August 18, 2015

Add a Viking Entry Phone to an

Existing Phone Line

The C-200 allows single line telephones or a telephone system to share a phone line with a single Viking entry phone. Tenants may answer an entry phone call and converse with the visitor.

The C-200 provides a “Call Waiting” tone when the phone line is in use.

Tenants may call out to the entry phone for monitoring purposes. Auxiliary contacts are provided to operate a doorbell, or activate a camera, lights, etc. NOTE: Not for use with a door strike.

If additional features (such as doorstrike, multiple entry phones with caller ID, and keyless entry) are needed, use the Viking model C-2000B (see

DOD# 156).

www.vikingelectronics.com

Information: (715) 386-8861

Features Applications

• Allows single line telephones or a telephone system to share a phone line with a door entry phone

• House phones ring with C.O. line cadence or distinctive ring when the entry phone “Call” button is pressed

• Compatible with these Viking entry phones:

- E-10A, E-20B, E-30, E-35, E-40, E-50, E-60,

E-65, E-70 and E-75 Phones

- K-1500-7 Stainless Steel Panel Phone

- Or use with any analog phone

• Provide entry phone activated chimes and whole house paging when used with a Viking model SLP-1 Single Line Paging Controller

• Produces double “Call Waiting” tones if the entry phone is activated when the house phones are already on a call

• One set of normally open and normally closed contacts available for operating a doorbell, camera, lights, etc.

• Add door strike capability with the Viking model

RC-2A Remote Touch Tone Controller

• Add an entry phone to your standard home or office phones to provide door communication

• Provide commercial or residential security via two-way handsfree communication at the door or gate

• Connects in series with a single phone line or to a phone system’s unused line input (loop start trunk input)

Specifications

Power: 120VAC / 13.8VAC 1.25A, UL listed adapter provided

Dimensions: 133mm x 104mm x 44mm (5.25" x

4.1" x 1.75")

Shipping weight: 0.9kg (2 lbs.)

Environmental: 0°C to 32°C (32°F to 90°F) with

5% to 95% non-condensing humidity

Contacts: .5A @ 125V AC, 1A @ 30V DC

Ring Output: 3.5 REN, capable of ringing (7) 0.5

REN phones

Auxiliary Power Output: 12VDC @ 300mA maximum

Talk Battery: 32V DC

Connections: (12) cage clamp screw terminals

Features Overview

VIKING

© MODEL C-200

VIKING

ELECTRONICS

HUDSON, WI 54016

SINGLE ENTRY PHONE

CONTROLLER

Simplified Schematic

Phones or

Phone System

Power Input

(13.8VAC @1.25A

adapter included)

C.O.

Line

DIP Switches

1 2 3

ON

1 2 3

1 2 3 4 5 6 7 8 9 10 11 12

Line

Circuit

Entry Door Phone

EARTH

GND

C.O. LINE

INPUT

OUT TO

PHONES

ENTRY

PHONE

N.O. COM N.C.

AUX CONTACTS

AUX POWER

OUTPUT

In-Use LED

(Not a Power Indicator)

* Optional

Earth Ground

C.O. / Phone Line Input

Line Out to Telephones

GND

+12VDC

Auxiliary

Power Output

N.C.

COM

N.O.

Auxiliary

Relay Contacts

To Entry Door Phone

* Note: To increase surge protection, fasten a wire from the screw terminal to Earth Ground (grounding rod, water pipe, etc.)

Installation

IMPORTANT: Electronic devices are susceptible to lightning and power station electrical surges from both the AC outlet and the telephone line. It is recommended that a surge protector be installed to protect against such surges.

A. Basic Installation

120V AC

13.8V AC

Adapter included

VIKING

© MODEL C-200

VIKING

ELECTRONICS

HUDSON, WI 54016

SINGLE ENTRY PHONE

CONTROLLER

2

* Earth

Ground

(optional)

C.O. / Phone

Line Input

1 2 3

ON

1 2 3

1 2 3 4 5 6 7 8 9 10 11 12

EARTH

GND

C.O. LINE

INPUT

OUT TO

PHONES

ENTRY

PHONE

N.O. COM N.C.

AUX CONTACTS

AUX POWER

OUTPUT

N.O. contacts to doorbell switch, camera control, etc.

To Entry Door Phone (not included)

Compatible Viking Door Phones:

Analog Trunk

Line Input of a

Phone System

-OR-

Dedicated

Analog Phone(s)

E-40 Series E-50 Series E-10A

* Note: To increase surge protection, fasten a wire from the screw terminal to Earth

Ground (grounding rod, water pipe, etc.)

E-20B E-30 E-35

Note: All of these phones are equipped with an auto answer feature.

B. Add Paging, Music-On-Hold, and Loud Ringing with a Viking SLP-1

For more information and installation instructions on the SLP-1, see DOD# 478 .

VIKING

© MODEL SLP-1

PREAMP

VOLUME

2 WATT

AMP GAIN

VIKING

ELECTRONICS

HUDSON, WI 54016

MIN MAX MIN MAX

SINGLE LINE

PAGING CONTROLLER

VIKING

© MODEL C-200

VIKING

ELECTRONICS

HUDSON, WI 54016

SINGLE ENTRY PHONE

CONTROLLER

MUSIC

ON

HOLD

INPUT

AUDIO

INPUT

L R

DOOR BELL

SW. INPUT

LOUD RING

ENABLE

- +

I.O. COM.

- +

PAGE TRIG. OUT

PWR

AUDIO

OUTPUT

L R

PAGE MUTE

ON

1 2 3

C.O. LINE

INPUT

OUT TO

PHONES

- SPKR +

OUTPUT

L R L R

1 2 3

ON

1 2 3

1 2 3 4 5 6 7 8 9 10 11 12

EARTH

GND

C.O. LINE

INPUT

OUT TO

PHONES

ENTRY

PHONE

N.O. COM N.C.

AUX CONTACTS

AUX POWER

OUTPUT

Entry Door

Phone

Optional wiring for door chime over speakers. If used, set the

C-200 DIP switch 2 to OFF.

* Earth Ground

(optional)

To Additional

Analog Phones

E-40-SS

( not included)

C.O. / Phone

Line Input

* Note: To increase surge protection, fasten a wire from the screw terminal to Earth Ground (grounding rod, water pipe, etc.)

Analog

Phone

C. Add Door Strike Relay Control with a Viking RC-2A

For more information and installation instructions on the RC-2A, see DOD# 160 .

VIKING

1 2 3

ON

1 2 3

© MODEL C-200

VIKING

ELECTRONICS

HUDSON, WI 54016

SINGLE ENTRY PHONE

CONTROLLER

1 2 3 4 5 6 7 8 9 10 11 12

EARTH

GND

C.O. LINE

INPUT

OUT TO

PHONES

ENTRY

PHONE

N.O. COM N.C.

AUX CONTACTS

AUX POWER

OUTPUT

VIKING

© MODEL RC-2A

VIKING

ELECTRONICS

HUDSON, WI 54016

REMOTE TOUCH TONE

RELAY CONTROLLER

RELAY

CONTACTS

1 2 3 4 5 6 7

C C

8

PROGRAMMING

SWITCHES

ON

1

E

F

0 1 2 3

4 5

ENTRY CODE

2

E

F

0 1 2 3

4 5

3

0 1 2 3

4 5

1 2 3 4 5 6 7

S1 S2 S3

* Earth Ground

(optional)

To Additional

Analog Phones

C.O. / Phone

Line Input

Analog

Phone

* Note: To increase surge protection, fasten a wire from the screw terminal to Earth Ground (grounding rod, water pipe, etc.)

Entry Door

Phone

E-40-SS

( not included)

5A @ 30V DC

250V AC maximum

(not included)

Doorstrike /

Magnetic Lock

Note: Gate controllers do not typically require power.

Door

3

D. Using the C-200 on an Unused Trunk / Line Input

The C-200 can also be used without a phone line. This is ideal for connecting the C-200 to an unused trunk/phone line of a phone system, or connecting to phones used only for door communications

120V AC

13.8V AC

Adapter included

VIKING

© MODEL C-200

VIKING

ELECTRONICS

HUDSON, WI 54016

SINGLE ENTRY PHONE

CONTROLLER

* Earth Ground

(optional)

1 2 3

ON

1 2 3

1 2 3 4 5 6 7 8 9 10 11 12

EARTH

GND

C.O. LINE

INPUT

OUT TO

PHONES

ENTRY

PHONE

N.O. COM N.C.

AUX CONTACTS

AUX POWER

OUTPUT

Entry Door

Phone

Dedicated

Analog

Phone(s)

-OR-

Analog Trunk /

Line Input of a

Phone System

E-40-SS

( not included)

4

Switch

1

1

2

2

3

3

Programming

Position Description

OFF

ON

OFF

Maximum ring count set to 3 rings

Maximum ring count set to 10 rings

ON

OFF

Auxiliary relay activates a doorbell

Auxiliary relay activates a camera or courtesy lights for the duration the door phone is in use

Ringing enabled (normal mode)

ON

Ringing disabled (doorbell mode) Note: Aux Relay Contacts must be connected to a doorbell

DIP Switches shown in the factory default positions

VIKING

©

MODEL C-200

VIKING

ELECTRONICS

HUDSON, WI 54016

SINGLE ENTRY PHONE

CONTROLLER

ON ON

OFF 1 2 3

1 2 3

ON

1 2 3

1 2 3 4 5 6 7 8 9 10 11 12

EARTH

GND

C.O. LINE

INPUT

OUT TO

PHONES

ENTRY

PHONE

N.O. COM N.C.

AUX CONTACTS

AUX POWER

OUTPUT

Operation

A. Visitors

When a visitor presses the call button (comes off-hook) on the Entry Door Phone, the In-Use LED will light and the C-200 will begin ringing the phones in a custom “double ring” cadence to identify there is a call from the Entry

Phone. The tenant may answer any ringing phone to talk to the visitor. The number of times the phones ring can be limited to either 3 or 10 by programming the maximum ring count using DIP switch 1 (see Programming section).

If the tenant is on a phone call, call waiting tones (double beep) are sent. A momentary hook switch flash on the phone will put the original call on hold and connect the tenant to the Entry Phone. After talking to the visitor, a second momentary hook switch flash will drop the Entry Phone and bring back the original call.

B. Monitoring

Tenants can monitor the Entry Phone (if it supports auto-answering capability) by coming off hook on any phone behind the C-200, and within 5 seconds, hook switch flashing the phone. In addition to audible surveying, the monitor feature has another use. If the phones have stopped ringing by the time the tenant reaches a phone, the monitor feature can be used to contact the visitor.

Note: All Viking Handsfree Entry Phones are equipped with an Auto-Answer feature.

C. Auxiliary Relay

The Auxiliary Relay is an option that can be used to activate either an existing doorbell, or a camera or courtesy lights.

1. Doorbell

With the Aux Relay programmed to operate a doorbell (DIP switch 2 set to OFF), the relay will provide a momentary closure whenever the Entry Phone is used. This momentary closure can be wired to an existing doorbell circuit (or Viking model SLP-1) so the house doorbell rings whenever a visitor presses the Entry

Phone call button. The doorbell activation can be used in addition to the “double ring” cadence to further identify the call is from the Entry Phone. Alternatively, phone ringing can be disabled (see Ringing section below), in which the doorbell will be the only indication that a visitor is waiting at the Entry Phone.

2. Camera/Courtesy Light

With the Aux Relay programmed to operate a camera or courtesy lights (DIP switch 2 set to ON), the relay will provide continuous closure whenever the Entry Phone is in use. This continuous closure can be wired to activate a camera or courtesy light whenever a visitor is using the Entry Phone.

D. Auxiliary Power Output

A 12V DC power output is provided for installation convenience. The output is limited to 300mA, and can aid in the ease of installing a camera.

Since the C-200’s Auxiliary Relay Contacts are limited to switching 1/2 amp of current, a second external 12 volt relay may be added if greater switching power is required. This external 12 volt relay can be driven from the Aux

Power Output, switched through the Auxiliary Relay Contacts.

E. Ringing

1. Enabled (Normal Mode)

With ringing enabled (DIP switch 3 set to OFF), the C-200 will ring the phones in a double ring pattern as described above (see Operation section A).

2. Disabled (Doorbell Mode)

With ringing disabled (DIP switch 3 set to ON), the C-200 will not ring the phones. This may be desirable for installations in which the Aux Relay is activating an existing doorbell. When the doorbell is heard, the tenant can choose to either pick up a phone or open the door to talk to the visitor. Even though ringing is disabled, the C-200 will still provide call waiting beeps if the tenant is on a phone call. Again, hook switch flashes allow the tenant to switch to the visitor, and back to the original call.

5

Compatible Products

E-40 Compact Entry Phones Available in Four Attractive Finishes

The E-40 Series Entry phones are compact, weather and vandal resistant, telephone line powered speaker phones designed to provide twoway handsfree communication. The E-

40's compact size allows it

E-40-SS E-40-BN E-40-WH E-40-BK to be mounted in a standard single gang electrical box. The E-40 is available in four different attractive finishes to match

“Brushed Stainless

Steel” (similar to brushed nickel)

“Oil Rubbed Bronze”

(satin dark brown powder paint with fine copper metallic)

“Satin White”

(satin white powder paint)

“Satin Black”

(fine texture satin black powder paint) your door hardware, light fixtures, etc. Replacement

E-40 faceplates (PNL40) can be purchased separately and are available in all four standard finishes. The E-40 entry phones can share a single phone line with house or small business telephones when used with a Viking model C-200 or C-2000A Entry Phone controller. The

E-40 entry phones can also be connected to an unused analog station port (programmed for ring down) on a phone system or connected directly to a telephone line when used with a Viking model K-1900-5 auto dialer. The E-40 features microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up when the call is completed. For extreme outdoor environments or corrosive atmospheres, the E-40 Series is available with Enhanced Weather Protection (EWP).

For more information on the E-40, see DOD# 187.

E-50 Compact Video Entry Phones Available in Four Attractive Finishes

The E-50 Series Video

Entry phones are compact, weather and vandal resistant speaker phones designed to provide two-way handsfree audio communication and color composite video of who is at your door or gate. The

E-50's compact size

E-50-SS

“Brushed Stainless

Steel” (similar to brushed nickel)

E-50-BN

“Oil Rubbed Bronze”

(satin dark brown powder paint with fine copper metallic)

E-50-WH

“Satin White”

(satin white powder paint)

E-50-BK

“Satin Black”

(fine texture satin black powder paint) allows it to be mounted in a standard single gang electrical box. The E-50 is available in five different attractive finishes to match your door hardware, light fixtures, etc. Replacement E-50 faceplates (PNL50) can be purchased separately and are available in all five standard finishes.

The E-50 entry phones can share a single phone line with house or small business telephones when used with a

Viking model C-200 or C-2000A Entry Phone controller. The E-50 entry phones can also be connected to an unused analog station port (programmed for ring down) on a phone system or connected directly to a telephone line when used with a Viking model K-1900-5 auto dialer. The E-50 features a built-in high resolution color video camera, microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up when the call is completed. For extreme outdoor environments or corrosive atmospheres, the

E-50 Series is available with Enhanced Weather Protection (EWP).

For more information on the E-50, see DOD# 191.

6

E-10A and E-20B Phone Line Powered Speaker Phones

The E-10A and E-20B are telephone line powered speaker phones designed to provide two-way handsfree communication. The E-10A and E-20B can be connected directly to a C.O. line or analog

PABX/KSU station when used in conjunction with a Hot-Line Dialer or programmed ring down circuit.

The E-10A and E-20B can also be used with Viking’s DLE-200B ring down circuit. When the “Call” button is pressed, the E-10A or E-20B will come off-hook and will remain off-hook until a CPC is detected or the pre-selected timeout has elapsed, the unit will then automatically disconnect. For outdoor or harsh environments, the E-10A and E-20B are available with Enhanced Weather Protection

(EWP). For more information on the E-10A or E-20B, see DOD# 210.

Model E-10A Model E-20B

E-30/E-35 Handsfree Speaker Phones with Dialer

The E-30 handsfree phone is designed to provide quick and reliable handsfree communication and can be connected directly to a C.O. line or analog PABX/KSU station. The E-30 features non-volatile memory, a built in dialer, and intelligent call progress detection for automatic hang-up when the call is completed. The E-35 shares the same features as the E-30 with a built-in color video camera. The E-

30 can be programmed to dial up to 5 different numbers on ring no answer or busy and can be configured to dial these numbers until answered. The E-30-EWP shares all of the features of the E-30 in addition to Enhanced Weather Protection (EWP) for installation in harsh environments. For more information on the E-30, see DOD# 212.

Model E-30 Model E-35

(with built-in camera)

7

Warranty

IF YOU HAVE A PROBLEM WITH A VIKING PRODUCT, CONTACT: VIKING TECHNICAL SUPPORT AT (715) 386-8666

Our Technical Support Department is available for assistance Monday through Friday 8am - 5pm central time. So that we can give you better service, before you call please:

1. Know the model number, the serial number and what software version you have (see serial label).

2. Have your Product Manual in front of you.

3. It is best if you are on site.

RETURNING PRODUCT FOR REPAIR

The following procedure is for equipment that needs repair:

1. Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (RA) number. The customer MUST have a complete description of the problem, with all pertinent information regarding the defect, such as options set, conditions, symptoms, methods to duplicate problem, frequency of failure, etc.

2. Packing: Return equipment in original box or in proper packing so that damage will not occur while in transit. Static sensitive equipment such as a circuit board should be in an anti-static bag, sandwiched between foam and individually boxed. All equipment should be wrapped to avoid packing material lodging in or sticking to the equipment. Include ALL parts of the equipment. C.O.D. or freight collect shipments cannot be accepted. Ship cartons prepaid to: Viking Electronics, 1531 Industrial Street, Hudson, WI 54016

3. Return shipping address: Be sure to include your return shipping address inside the box. We cannot ship to a PO Box.

4. RA number on carton: In large printing, write the R.A. number on the outside of each carton being returned.

RETURNING PRODUCT FOR EXCHANGE

The following procedure is for equipment that has failed out-of-box (within 10 days of purchase):

1. Customer must contact Viking’s Technical Support at 715-386-8666 to determine possible causes for the problem. The customer MUST be able to step through recommended tests for diagnosis.

2. If the Technical Support Product Specialist determines that the equipment is defective based on the customer's input and troubleshooting, a Return Authorization (R.A.) number will be issued.

This number is valid for fourteen (14) calendar days from the date of issue.

3. After obtaining the R.A. number, return the approved equipment to your distributor, referencing the R.A. number. Your distributor will then replace the Viking product using the same R.A. number.

4. The distributor will NOT exchange this product without first obtaining the R.A. number from you. If you haven't followed the steps listed in 1, 2 and 3, be aware that you will have to pay a restocking charge.

TWO YEAR LIMITED WARRANTY

Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of two years from the date of purchase from any authorized Viking distributor. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to

Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016. Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a

Return Authorization (R.A.) number.

This warranty does not cover any damage to the product due to lightning, over voltage, under voltage, accident, misuse, abuse, negligence or any damage caused by use of the product by the purchaser or others. This warranty does not cover non-EWP products that have been exposed to wet or corrosive environments.

This warranty does not cover stainless steel surfaces that have not been properly maintained.

NO OTHER WARRANTIES. VIKING MAKES NO WARRANTIES RELATING TO ITS PRODUCTS OTHER THAN AS DESCRIBED ABOVE AND DISCLAIMS

ANY EXPRESS OR IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.

EXCLUSION OF CONSEQUENTIAL DAMAGES. VIKING SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE TO PURCHASER, OR ANY OTHER

PARTY, FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL OR EXEMPLARY DAMAGES ARISING OUT OF OR RELATED TO THE SALE OR USE OF THE

PRODUCT SOLD HEREUNDER.

EXCLUSIVE REMEDY AND LIMITATION OF LIABILITY. WHETHER IN AN ACTION BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT

LIABILITY) OR ANY OTHER LEGAL THEORY, ANY LIABILITY OF VIKING SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, OR AT

VIKING'S OPTION, REFUND OF THE PURCHASE PRICE AS THE EXCLUSIVE REMEDY AND ANY LIABILITY OF VIKING SHALL BE SO LIMITED.

IT IS EXPRESSLY UNDERSTOOD AND AGREED THAT EACH AND EVERY PROVISION OF THIS AGREEMENT WHICH PROVIDES FOR DISCLAIMER OF

WARRANTIES, EXCLUSION OF CONSEQUENTIAL DAMAGES, AND EXCLUSIVE REMEDY AND LIMITATION OF LIABILITY, ARE SEVERABLE FROM ANY

OTHER PROVISION AND EACH PROVISION IS A SEPARABLE AND INDEPENDENT ELEMENT OF RISK ALLOCATION AND IS INTENDED TO BE ENFORCED

AS SUCH.

FCC REQUIREMENTS

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the

ACTA. On the side of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.

The REN is used to determine the number of devices that may be connected to a telephone line. Excessive REN's on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of the REN's should not exceed five

(5.0) To be certain of the number of devices that may be connected to a line, as determined by the total REN's, contact the local telephone company. For products approved after July

23, 2001, the REN for this product is part of the product identifier that has the format

US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point

(e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.

The plug used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this C-200 does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

If the C-200 causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications to maintain uninterrupted service.

If trouble is experienced with the C-200, for repair or warranty information, please contact:

Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI 54016 (715) 386-8666

If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

Connection to Party Line Service is subject to State Tariffs. Contact the state public utility commission, public service commission or corporation commission for information.

WHEN PROGRAMMING EMERGENCY NUMBERS AND (OR) MAKING TEST

CALLS TO EMERGENCY NUMBERS:

Remain on the line and briefly explain to the dispatcher the reason for the call. Perform such activities in the off-peak hours, such as early morning or late evenings.

It is recommended that the customer install an AC surge arrester in the AC outlet to which this device is connected. This is to avoid damaging the equipment caused by local lightning strikes and other electrical surges.

PART 15 LIMITATIONS

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Product Support: (715) 386-8666

Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.

DOD# 169

8

Printed in the U.S.A.

ZF302300 REV B