Denon | DN-F450R | Owner`s manual | Denon DN-F450R Owner`s manual

SOLID STATE RECORDER
DN-F450R
Owner’s Manual
PORTUGUÊS SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH
IMPORTANT TO SAFETY
WARNING:
To reduce the risk of fire and electric shock, this apparatus should not be
exposed to rain or moisture and objects filled with liquids, such as vases,
should not be placed on this apparatus
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR REFOR-MANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
FCC INFORMATION
(For US customers)
CAUTION
1.Handle the power supply cord carefully
Do not damage or deform the power supply cord. If it is damaged or deformed,
it may cause electric shock or malfunction when used. When removing from wall
outlet, be sure to remove by holding the plug attachment and not by pulling the cord.
2.Do not open the rear cover
In order to prevent electric shock, do not open the top cover.
If problems occur, contact your DENON DEALER.
3.Do not place anything inside
Do not place metal objects or spill liquid inside the system.
Electric shock or malfunction may result.
1.COMPLIANCE INFORMATION
Product Name: SOLID STATE RECORDER
Model Number: DN-F450R
Please, record and retain the Model name and serial number of your set shown on
the rating label.
Model No. DN-F450R
Serial No.
2.IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER
T
(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
This product complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this product may not cause harmful interference, and (2) this product
must accept any interference received, including interference that may cause undesired
operation.
Denon Professional div. D&M Professional
1100 Maplewood Drive Itasca, IL 60143
Tel. 630-741-0330
This product, when installed as indicated in the instructions contained in this manual,
meets FCC requirements. Modification not expressly approved by DENON may void your
authority, granted by the FCC, to use the product.
3.NOTE
This product has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This product generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this product does cause harmful interference to radio or television reception,
which can be determined by turning the product OFF and ON, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•Connect the product into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the local retailer authorized to distribute this type of product or an experienced
radio/TV technician for help.
This Class B apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
I
ENGLISH
DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA PORTUGUÊS
IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
II
12.Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long
periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
15.Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
PORTUGUÊS SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH
CAUTION:
(English)
To completely disconnect this product from the mains,
disconnect the plug from the wall socket outlet.
The mains plug is used to completely interrupt the power
supply to the unit and must be within easy access by the
user.
Do not expose batteries to excessive heat such as
sunshine, fire or the like.
VORSICHT:
(Deutsch)
Um dieses Gerät vollständig von der Stromversorgung
abzutrennen, trennen Sie bitte den Netzstecker von der
Wandsteckdose ab.
Die Hauptstecker werden ver wendet, um die
Stromversorgung zum Gerät völlig zu unterbrechen; er
muss für den Benutzer gut und einfach zu erreichen sein.
Setzen Sie Batterien nicht übermäßiger Wärme aus, z. B.
Sonnenstrahlung, Feuer oder dergleichen.
PRECAUTION:
(Français)
Pour déconnecter complètement ce produit du courant
secteur, débranchez la prise de la prise murale.
La prise secteur est utilisée pour couper complètement
l’alimentation de l’appareil et l’utilisateur doit pouvoir y
accéder facilement.
N’exposez pas les batteries à une chaleur excessive telle
que le soleil, le feu ou autre.
ATTENZIONE:
(Italiano)
Per scollegare definitivamente questo prodotto dalla rete
di alimentazione elettrica, togliere la spina dalla relativa
presa.
La spina di rete viene utilizzata per interrompere
completamente l’alimentazione all’unità e deve essere
facilmente accessibile all’utente.
Non esporre le batterie a un calore eccessivo, per
esempio al sole, al fuoco o altre fonti.
PRECAUCIÓN:
(Español)
Para desconectar completamente este producto de
la alimentación eléctrica, desconecte el enchufe del
enchufe de la pared.
El enchufe de la alimentación se utiliza para interrumpir
por completo el suministro de alimentación a la unidad y
debe de encontrarse en un lugar al que el usuario tenga
fácil acceso.
No exponga las pilas a calor excesivo, como a la luz solar,
el fuego, etc.
VOORZICHTIGHEID:
(Nederlands)
Om de voeding van dit product volledig te onderbreken
moet de stekker uit het stopcontact worden getrokken.
De netstekker wordt gebruikt om de stroomtoevoer naar
het toestel volledig te onderbreken en moet voor de
gebruiker gemakkelijk bereikbaar zijn.
Stel de batterijen niet bloot aan felle zonneschijn, brand,
enzovoorts.
FÖRSIKTIHETSMÅTT:
(Svenska)
Koppla loss stickproppen från eluttaget för att helt skilja
produkten från nätet.
S t i ck p r o p p e n a nvä n d s fö r a tt h e l t b r y t a
strömförsörjningen till apparaten, och den måste vara
lättillgänglig för användaren.
Utsätt inte batterierna för stark hetta såsom solsken, eld
eller liknande.
ATENÇÃO:
(Português)
Para desligar completamente este produto da corrente,
desligue a ficha da tomada eléctrica.
A ficha eléctrica é utilizada para interromper
completamente a alimentação da unidade e deve estar
num local onde o utilizador lhe possa aceder facilmente.
Não exponha as pilhas a fontes de calor excessivo, como
luz solar, fogo ou semelhantes.
nnNOTE ON USE / HINWEISE ZUM GEBRAUCH
WARNINGS
WARNHINWEISE
•Avoid high temperatures.
Allow for sufficient heat
dispersion when installed in a
rack.
•Handle the power cord carefully.
Hold the plug when unplugging
the cord.
•Keep the unit free from
moisture, water, and dust.
•Unplug the power cord when
not using the unit for long
periods of time.
•Do not obstruct the ventilation
holes.
•Do not let foreign objects into
the unit.
•Do not let insecticides,
benzene, and thinner come in
contact with the unit.
•Never disassemble or modify
the unit in any way.
•Ventilation should not be
impeded by covering the
ventilation openings with
items, such as newspapers,
tablecloths or curtains.
•Naked flame sources such as
lighted candles should not be
placed on the unit.
•Observe and follow local
regulations regarding battery
disposal.
•Do not expose the unit to
dripping or splashing fluids.
•Do not place objects filled with
liquids, such as vases, on the
unit.
•Do not handle the mains cord
with wet hands.
•When the switch is in the OFF
position, the equipment is not
completely switched off from
MAINS.
•The equipment shall be
installed near the power supply
so that the power supply is
easily accessible.
•Vermeiden Sie hohe Temperaturen.
Beachten Sie, dass eine
ausreichende Belüftung
gewährleistet wird, wenn das Gerät
auf ein Regal gestellt wird.
•Gehen Sie vorsichtig mit dem
Netzkabel um.
Halten Sie das Kabel am
Stecker, wenn Sie den Stecker
herausziehen.
•Halten Sie das Gerät von
Feuchtigkeit, Wasser und Staub
fern.
•Wenn das Gerät längere Zeit
nicht verwendet werden soll,
trennen Sie das Netzkabel vom
Netzstecker.
•Decken Sie den Lüftungsbereich
nicht ab.
•Lassen Sie keine fremden
Gegenstände in das Gerät
kommen.
•Lassen Sie das Gerät nicht
mit Insektiziden, Benzin oder
Verdünnungsmitteln in Berührung
kommen.
•Versuchen Sie niemals das Gerät
auseinander zu nehmen oder zu
verändern.
•Die Belüftung sollte auf keinen
Fall durch das Abdecken der
Belüftungsöffnungen durch
Gegenstände wie beispielsweise
Zeitungen, Tischtücher, Vorhänge
o. Ä. behindert werden.
•Auf dem Gerät sollten keinerlei
direkte Feuerquellen wie
beispielsweise angezündete
Kerzen aufgestellt werden.
•Bitte beachten Sie bei der
Entsorgung der Batterien
die örtlich geltenden
Umweltbestimmungen.
•Das Gerät sollte keiner tropfenden
oder spritzenden Flüssigkeit
ausgesetzt werden.
•Auf dem Gerät sollten keine mit
Flüssigkeit gefüllten Behälter wie
beispielsweise Vasen aufgestellt
werden.
•Das Netzkabel nicht mit feuchten
oder nassen Händen anfassen.
•Wenn der Schalter ausgeschaltet
ist (OFF-Position), ist das Gerät
nicht vollständig vom Stromnetz
(MAINS) abgetrennt.
•Das Gerät sollte in der Nähe einer
Netzsteckdose aufgestellt werden,
damit es leicht an das Stromnetz
angeschlossen werden kann.
III
ENGLISH
DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA PORTUGUÊS
nnOBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO / NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA / NOTA
SOBRE UTILIZAÇÃO
AVERTISSEMENTS
AVVERTENZE
ADVERTENCIAS
WAARSCHUWINGEN
VARNINGAR
AVISOS
•Eviter des températures
élevées.
Tenir compte d’une dispersion
de chaleur suffisante lors de
l’installation sur une étagère.
•Manipuler le cordon
d’alimentation avec précaution.
Tenir la prise lors du
débranchement du cordon.
•Protéger l’appareil contre
l’humidité, l’eau et la poussière.
•Débrancher le cordon
d’alimentation lorsque l’appareil
n’est pas utilisé pendant de
longues périodes.
•Ne pas obstruer les trous
d’aération.
•Ne pas laisser des objets
étrangers dans l’appareil.
•Ne pas mettre en contact des
insecticides, du benzène et un
diluant avec l’appareil.
•Ne jamais démonter ou
modifier l’appareil d’une
manière ou d’une autre.
•Ne pas recouvrir les orifi ces
de ventilation avec des objets
tels que des journaux, nappes
ou rideaux. Cela entraverait la
ventilation.
•Ne jamais placer de flamme
nue sur l'appareil, notamment
des bougies allumées.
•Veillez à respecter les lois en
vigueur lorsque vous jetez les
piles usagées.
•L’appareil ne doit pas être
exposé à l’eau ou à l’humidité.
•Ne pas poser d’objet contenant
du liquide, par exemple un
vase, sur l’appareil.
•Ne pas manipuler le cordon
d’alimentation avec les mains
mouillées.
•Lorsque l’interrupteur est sur
la position OFF, l’appareil n’est
pas complètement déconnecté
du SECTEUR (MAINS).
•L’appareil sera installé près de
la source d’alimentation, de
sorte que cette dernière soit
facilement accessible.
•Evitate di esporre l’unità a
temperature elevate.
Assicuratevi che vi sia
un’adeguata dispersione del
calore quando installate l’unità
in un mobile per componenti
audio.
•Manneggiate il cavo di
alimentazione con attenzione.
Tenete ferma la spina quando
scollegate il cavo dalla presa.
•Tenete l’unità lontana
dall’umidità, dall’acqua e dalla
polvere.
•Scollegate il cavo di
alimentazione quando
prevedete di non utilizzare
l’unità per un lungo periodo di
tempo.
•Non coprite i fori di
ventilazione.
•Non inserite corpi estranei
all’interno dell’unità.
•Assicuratevi che l’unità non
entri in contatto con insetticidi,
benzolo o solventi.
•Non smontate né modificate
l’unità in alcun modo.
•Le aperture di ventilazione
non devono essere ostruite
coprendole con oggetti, quali
giornali, tovaglie, tende e così
via.
•Non posizionate sull’unità fi
amme libere, come ad esempio
candele accese.
•Prestate attenzione agli aspetti
legati alla tutela dell’ambiente
nello smaltimento delle
batterie.
•L’apparecchiatura non deve
essere esposta a gocciolii o
spruzzi.
•Non posizionate sull’unità alcun
oggetto contenente liquidi,
come ad esempio i vasi.
•Non toccare il cavo di
alimentazione con le mani
bagnate.
•Quando l’interruttore
è nella posizione OFF,
l’apparecchiatura non è
completamente scollegata da
MAINS.
•L’apparecchio va installato
in prossimità della fonte di
alimentazione, in modo che
quest’ultima sia facilmente
accessibile.
•Evite altas temperaturas.
Permite la suficiente dispersión
del calor cuando está instalado
en la consola.
•Maneje el cordón de energía
con cuidado.
Sostenga el enchufe cuando
desconecte el cordón de
energía.
•Mantenga el equipo libre de
humedad, agua y polvo.
•Desconecte el cordón de
energía cuando no utilice el
equipo por mucho tiempo.
•No obstruya los orificios de
ventilación.
•No deje objetos extraños
dentro del equipo.
•No permita el contacto
de insecticidas, gasolina y
diluyentes con el equipo.
•Nunca desarme o modifique el
equipo de ninguna manera.
•La ventilación no debe quedar
obstruida por haberse cubierto
las aperturas con objetos
como periódicos, manteles o
cortinas.
•No deberán colocarse sobre
el aparato fuentes inflamables
sin protección, como velas
encendidas.
•A la hora de deshacerse de las
pilas, respete la normativa para
el cuidado del medio ambiente.
•No exponer el aparato al goteo
o salpicaduras cuando se
utilice.
•No colocar sobre el aparato
objetos llenos de líquido, como
jarros.
•No maneje el cable de
alimentación con las manos
mojadas.
•Cuando el interruptor está en la
posición OFF, el equipo no está
completamente desconectado
de la alimentación MAINS.
•El equipo se instalará cerca
de la fuente de alimentación
de manera que resulte fácil
acceder a ella.
•Vermijd hoge temperaturen.
Zorg er bij installatie in een
audiorack voor, dat de door het
toestel geproduceerde warmte
goed kan worden afgevoerd.
•Hanteer het netsnoer
voorzichtig.
Houd het snoer bij de stekker
vast wanneer deze moet
worden aan- of losgekoppeld.
•Laat geen vochtigheid,
water of stof in het apparaat
binnendringen.
•Neem altijd het netsnoer uit
het stopkontakt wanneer het
apparaat gedurende een lange
periode niet wordt gebruikt.
•De ventilatieopeningen mogen
niet worden beblokkeerd.
•Laat geen vreemde
voorwerpen in dit apparaat
vallen.
•Voorkom dat insecticiden,
benzeen of verfverdunner met
dit toestel in contact komen.
•Dit toestel mag niet
gedemonteerd of aangepast
worden.
•De ventilatie mag niet
worden belemmerd door
de ventilatieopeningen af
te dekken met bijvoorbeeld
kranten, een tafelkleed of
gordijnen.
•Plaats geen open vlammen,
bijvoorbeeld een brandende
kaars, op het apparaat.
•Houd u steeds aan de
milieuvoorschriften wanneer u
gebruikte batterijen wegdoet.
•Stel het apparaat niet bloot aan
druppels of spatten.
•Plaats geen voorwerpen gevuld
met water, bijvoorbeeld een
vaas, op het apparaat.
•Raak het netsnoer niet met
natte handen aan.
•Als de schakelaar op OFF
staat, is het apparaat niet
volledig losgekoppeld van de
netspanning (MAINS).
•De apparatuur wordt in de
buurt van het stopcontact
geïnstalleerd, zodat dit altijd
gemakkelijk toegankelijk is.
•Undvik höga temperaturer.
Se till att det finns möjlighet
till god värmeavledning vid
montering i ett rack.
•Hantera nätkabeln varsamt.
Håll i kabeln när den kopplas
från el-uttaget.
•Utsätt inte apparaten för fukt,
vatten och damm.
•Koppla loss nätkabeln om
apparaten inte kommer att
användas i lång tid.
•Täpp inte till
ventilationsöppningarna.
•Se till att främmande föremål
inte tränger in i apparaten.
•Se till att inte insektsmedel
på spraybruk, bensen och
thinner kommer i kontakt med
apparatens hölje.
•Ta inte isär apparaten och
försök inte bygga om den.
•Ventilationen bör inte
förhindras genom att täcka
för ventilationsöppningarna
med föremål såsom tidningar,
bordsdukar eller gardiner.
•Placera inte öppen eld, t.ex.
tända ljus, på apparaten.
•Tänk på miljöaspekterna när du
bortskaffar batterier.
•Apparaten får inte utsättas för
vätska.
•Placera inte föremål fyllda
med vätska, t.ex. vaser, på
apparaten.
•Hantera inte nätsladden med
våta händer.
•Även om strömbrytaren står
i det avstängda läget OFF,
så är utrustningen inte helt
bortkopplad från det elektriska
nätet (MAINS).
•Utrustningen ska vara
installerad nära strömuttaget
så att strömförsörjningen är lätt
att tillgå.
•Evite temperaturas altas.
Assegure uma suficiente
dispersãodo calor quando a
unidade forinstalada numa
prateleira.
•Manuseie o cabo de
alimentaçãocom cuidado.Puxe
pela ficha quando desligar
ocabo de alimentação.
•Mantenha a unidade afastada
dahumidade, da água e do pó.
•Desligue o cabo de
alimentaçãoquando não estiver
a utilizar aunidade por longos
períodos detempo.
•Não obstrua os orifícios
deventilação.
•Não deixe objectos estranhos
dentro da unidade.
•Não permita que insecticidas,
benzina e diluente entrem em
contacto com a unidade.
•Nunca desmonte ou modifique
dealguma forma a unidade.
•A ventilação não deve
ser obstruída, tapando as
aberturas de ventilação com
objectos, como jornais, toalhas
ou cortinas.
•Não devem ser colocadas
junto à unidade fontes de
chama aberta, como velas
acesas.
•Respeite as regulamentações
locais relativas à eliminação
de pilhas.
•Não exponha a unidade a
gotejamento ou salpicos de
líquidos.
•Não coloque objectos com
líquidos, como jarras, em cima
da unidade.
•Não manuseie o cabo de
alimentação com as mãos
molhadas.
•Quando o interruptor se
encontra na posição OFF,
o equipamento não está
completamente desligado da
REDE ELÉCTRICA.
•O equipamento deve ser
instalado junto da fonte de
alimentação, para que a
fonte de alimentação esteja
facilmente acessível.
IV
PORTUGUÊS SVENSKA NEDERLANDS ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH
CAUTION
•The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
•No naked flame sources, such as lighted candles, should be placed on the apparatus.
•Attention should be drawn to the environmental aspects of battery disposal.
•The apparatus shall not be exposed to dripping or splashing for use.
•No objects filled with liquids, such as vases, shall be placed on the apparatus.
•DECLARATION OF CONFORMITY
(English)
We declare under our sole responsibility that this product, to which this declaration relates, is
in conformity with the following standards:
EN60950-1, EN55022, EN55024, EN61000-3-2 and EN61000-3-3.
Following the provisions of Low Voltage Directive 2006/95/EC and EMC Directive 2004/108/
EC, the EC regulation 1275/2008 and its frame work Directive 2009/125/EC for Energy-related
Products (ErP).
•DECLARACIÓN DE CONFORMIDAD
•ÜBEREINSTIMMUNGSERKLÄRUNG
(Deutsch)
•EENVORMIGHEIDSVERKLARING
•DECLARATION DE CONFORMITE
(Français)
•ÖVERENSSTÄMMELSESINTYG
•DICHIARAZIONE DI CONFORMITÀ
(Italiano)
Wir erklären unter unserer Verantwortung, daß dieses Produkt, auf das sich diese Erklärung
bezieht, den folgenden Standards entspricht:
EN60950-1, EN55022, EN55024, EN61000-3-2 und EN61000-3-3.
Gemäß den Bestimmungen der Niederspannungsrichtlinie 2006/95/EG und EMV Richtlinie
2004/108/EG, der Verordnung (EG) Nr. 1275/2008 der Kommission und deren Rahmenrichtlinie
2009/125/EG zu energieverbrauchsrelevanten Produkten (ErP).
Nous déclarons sous notre seule responsabilité que l’appareil, auquel se réfère cette
déclaration, est conforme aux standards suivants:
EN60950-1, EN55022, EN55024, EN61000-3-2 et EN61000-3-3.
Selon la directive 2006/95/EC concernant la basse tension et la directive CEM 2004/108/EC,
la réglementation européenne 1275/2008 et la directive 2009/125/EC établissant un cadre de
travail applicable aux produits liés à l’énergie (ErP).
Dichiariamo con piena responsabilità che questo prodotto, al quale la nostra dichiarazione si
riferisce, è conforme alle seguenti normative:
EN60950-1, EN55022, EN55024, EN61000-3-2 e EN61000-3-3.
Facendo seguito alle disposizioni della direttiva sul basso voltaggio 2006/95/EC alla direttiva
EMC 2004/108/EC, alla norma EC 1275/2008 e alla relativa legge quadro 2009/125/EC in
materia di prodotti alimentati ad energia (ErP).
QUESTO PRODOTTO E’ CONFORME
AL D.M. 28/08/95 N. 548
(Español)
Declaramos bajo nuestra exclusiva responsabilidad que este producto al que hace referencia
esta declaración, está conforme con los siguientes estándares:
EN60950-1, EN55022, EN55024, EN61000-3-2 y EN61000-3-3.
De acuerdo con la directiva sobre baja tensión 2006/95/CE y la directiva sobre CEM 2004/108/
CE, la normativa CE 1275/2008 y su directiva marco 2009/125/EC para productos relacionados
con la energía (ErP).
(Nederlands)
Wij verklaren uitsluitend op onze verantwoordelijkheid dat dit produkt, waarop deze verklaring
betrekking heeft, in overeenstemming is met de volgende normen:
EN60950-1, EN55022, EN55024, EN61000-3-2 en EN61000-3-3.
Volgens de voorzieningen van lage spanningsrichtlijn 2006/95/EC en EMC-richtlijn 2004/108/
EC, de EU-richtlijn 1275/2008 en de kaderrichtlijn 2009/125/EC voor energieverbruikende
producten (ErP).
(Svenska)
Härmed intygas helt på eget ansvar att denna produkt, vilken detta intyg avser, uppfyller
följande standarder:
EN60950-1, EN55022, EN55024, EN61000-3-2 och EN61000-3-3.
Uppfyller reglerna i lågspänningsdirektivet 2006/95/EC och EMC-direktivet 2004/108/
EC, EU-förordningen 1275/2008 och ramverksdirektivet 2009/125/EC för energirelaterade
produkter (ErP).
•DECLARAÇÃO DE CONFORMIDADE
(Português)
Declaramos sob nossa exclusiva responsabilidade que este produto, ao qual se refere esta
declaração, se encontra em conformidade com as seguintes normas:
EN60950-1, EN55022, EN55024, EN61000-3-2 e EN61000-3-3.
De acordo com as provisões da Directiva de Baixa Tensão 2006/95/CE e a Directiva CEM
2004/108/CE, o Regulamento (CE) 1275/2008 e a respectiva Directiva-Quadro 2009/125/CE
para produtos relacionados com o consumo de energia (ErP).
D&M Professional Europe
Kingsbridge House
Padbury Oaks
Longford
Middlesex
UB7 0EH
UK
V
ENGLISH
DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA PORTUGUÊS
A NOTE ABOUT RECYCLING:
This product’s packaging materials are recyclable and can be reused. Please dispose of any
materials in accordance with the local recycling regulations.
When discarding the unit, comply with local rules or regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with the
local regulations concerning battery disposal.
This product and the supplied accessories, excluding the batteries, constitute the applicable
product according to the WEEE directive.
HINWEIS ZUM RECYCLING:
Das Verpackungsmaterial dieses Produktes ist zum Recyceln geeignet und kann wieder
verwendet werden. Bitte entsorgen Sie alle Materialien entsprechend der örtlichen RecyclingVorschriften.
Beachten Sie bei der Entsorgung des Gerätes die örtlichen Vorschriften und Bestimmungen.
Die Batterien dürfen nicht in den Hausmüll geworfen oder verbrannt werden; bitte entsorgen Sie
die Batterien gemäß der örtlichen Vorschriften.
Dieses Produkt und das im Lieferumfang enthaltene Zubehör (mit Ausnahme der Batterien!)
entsprechen der WEEE-Direktive.
UNE REMARQUE CONCERNANT LE RECYCLAGE:
Les matériaux d’emballage de ce produit sont recyclables et peuvent être réutilisés. Veuillez disposer
des matériaux conformément aux lois sur le recyclage en vigueur.
Lorsque vous mettez cet appareil au rebut, respectez les lois ou réglementations en vigueur.
Les piles ne doivent jamais être jetées ou incinérées, mais mises au rebut conformément aux lois en vigueur sur la
mise au rebut des piles.
Ce produit et les accessoires inclus, à l’exception des piles, sont des produits conformes à la directive DEEE.
NOTA RELATIVA AL RICICLAGGIO:
I materiali di imballaggio di questo prodotto sono riutilizzabili e riciclabili. Smaltire i materiali conformemente alle
normative locali sul riciclaggio.
Per lo smaltimento dell’unità, osservare le normative o le leggi locali in vigore.
Non gettare le batterie, né incenerirle, ma smaltirle conformemente alla normativa locale sui rifiuti chimici.
Questo prodotto e gli accessori inclusi nell’imballaggio sono applicabili alla direttiva RAEE, ad eccezione delle batterie.
VI
ACERCA DEL RECICLAJE:
Los materiales de embalaje de este producto son reciclables y se pueden volver a utilizar. Disponga de estos
materiales siguiendo los reglamentos de reciclaje de su localidad.
Cuando se deshaga de la unidad, cumpla con las reglas o reglamentos locales.
Las pilas nunca deberán tirarse ni incinerarse. Deberá disponer de ellas siguiendo los reglamentos de su localidad
relacionados con los desperdicios químicos.
Este producto junto con los accesorios empaquetados es el producto aplicable a la directiva RAEE excepto pilas.
EEN AANTEKENING MET BETREKKING TOT DE RECYCLING:
Het inpakmateriaal van dit product is recycleerbaar en kan opnieuw gebruikt worden. Er wordt verzocht om zich van
elk afvalmateriaal te ontdoen volgens de plaatselijke voorschriften.
Volg voor het wegdoen van de speler de voorschriften voor de verwijdering van wit- en bruingoed op.
Batterijen mogen nooit worden weggegooid of verbrand, maar moeten volgens de plaatselijke voorschriften
betreffende chemisch afval worden verwijderd.
Op dit product en de meegeleverde accessoires, m.u.v. de batterijen is de richtlijn voor afgedankte elektrische en
elektronische apparaten (WEEE) van toepassing.
OBSERVERA ANGÅENDE ÅTERVINNING:
Produktens emballage är återvinningsbart och kan återanvändas. Kassera det enligt lokala återvinningsbestämmelser.
När du kasserar enheten ska du göra det i överensstämmelse med lokala regler och bestämmelser.
Batterier får absolut inte kastas i soporna eller brännas. Kassera dem enligt lokala bestämmelser för kemiskt avfall.
Denna apparat och de tillbehör som levereras med den uppfyller gällande WEEE-direktiv, med undantag av batterierna.
UMA NOTA SOBRE A RECICLAGEM:
Os materiais de embalagem deste produto são recicláveis e podem ser reutilizados. Elimine quaisquer materiais de
acordo com as normas de reciclagem locais.
Quando eliminar a unidade, obedeça às regras ou normas locais.
As pilhas nunca devem ser deitadas fora ou incineradas, mas sim eliminadas de acordo com as normais locais
relativas aos resíduos químicos.
Este produto e os respectivos acessórios embalados em conjunto constituem o produto aplicável de acordo com a
directiva WEEE, excepto as pilhas.
Selecting a folder to store recorded files···································16
Recording······················································································16
Operations during recording·······················································17
Add a file during recording (Manual track)···································17
Adding marks (Marking)·······························································17
Recording time chart···································································18
REMOTE terminal 1······································································26
Wired remote switch operations·················································26
Cascade recording·······································································26
REMOTE terminal 2······································································27
RS232C control·············································································28
RS232C control············································································28
Play······························································································19
Information· ············································································40
Selecting the folder to playback·················································19
Playback························································································19
Operations during playback························································20
File switching (8, 9)·························································20
Fast forward and fast rewind (Search 6, 7)·······················20
Add marks (marking)····································································20
Searching for Marks·····································································20
Dividing a file···············································································20
Error messages·············································································40
Troubleshooting···········································································41
Part names and functions··················································3
Front panel······················································································3
Rear panel·······················································································4
Display·····························································································5
Switching the display·····································································5
Display during stop status·····························································5
Display during recording and recording pause·······························6
Display during playback and playback pause·································6
Connections··············································································7
Connecting to a computer··························································21
File/Folder settings·····························································22
File menu······················································································22
Playing back files (01 Play)···························································22
File information (02 Information)··················································22
Renaming files (03 Rename)·······················································22
Deleting files (04 Delete)·····························································23
Copying files (05 Copy)································································23
Moving files (06 Move)································································23
Deleting marks (07 Delete Mark)·················································23
Folder menu··················································································23
Selecting folders (1 Select)··························································24
Creating folders (2 Make Folder)·················································24
Renaming folders (3 Rename)·····················································24
Deleting folders (4 Delete)···························································24
Other functions············································································25
Locking operation buttons (Key lock)···········································25
File/Folder
Control function
settings
Information
Specifications
Menu list·······················································································10
Setting defaults············································································11
Menu operations·········································································11
Settings for recording or playback (Presets)································11
Display settings (Display)····························································14
Time & date settings (Time/Date)··············································14
Utility Function (Utility)·······························································15
Checking the firmware version (F.W Version)··························15
USB mode (Connection between DN-F450R) and
the computer··········································································21
USB mode and
the computer
Setting defaults· ···································································10
Index···························································································43
Play
Preparations···················································································7
Cables used for audio connection·················································7
Audio connections·········································································7
Analog connection (Unbalanced connection)·································7
Analog connection (Balanced connection)·····································7
Connecting to a computer····························································7
Connecting the external control terminal···································8
Remote terminal············································································8
RS-232C terminal···········································································8
Connecting headphone·································································8
Connecting the AC adaptor···························································8
Mounting SD card··········································································9
Inserting an SD card ·····································································9
Removing the SD Card··································································9
Cautions on SD card······································································9
Specifications·········································································42
Recording
Main features··················································································2
Accessories·····················································································2
Cautions on handling·····································································2
Setting defaults
Control function····································································26
Connections
Recording·················································································16
Part names
and functions
Getting started········································································2
Getting started
Contents
Index
1
Getting started
Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product.
After reading the manual, be sure to keep it for future reference.
Main features
•Stereo (2 channel) or monaural (1 channel) recording and playback
•Recording to various SD cards.
•2 Types of recording format
– Recording using MP3 (MPEG1 Layer III) audio compression format.
– Recording using 16-bit Linear PCM format (uncompressed audio).
•Equipped with a level switching type balanced XLR connector for
analog input.
•Computer compatibility (MS-DOS™, Windows, Macintosh
compatible audio file)
•Automatic recording stops recording when there is no sound, and
restarts recording when sound is detected (Silent Skip)
•Manual or automatic recording level control (ALC)
•Mark function makes specific search points without processing files
•Supports remote control operation from the two-line wired remote
and RS-232C connections.
•Supplied with Windows application program DMP Mark Editor for
editing the recorded files and marks.
•When two DN-F450R recorders are used, the Cascade recording
function automatically continues recording on the other unit if there
is no recording space remaining on the SD card.
Accessories
Cautions on handling
Check that the following parts are supplied with the product.
qOwner’s manual....................................................................... 1
wAC adaptor................................................................................ 1
eAC adaptor cord holder............................................................. 1
rScrew for fixing an AC adaptor cord holder.............................. 1
t19-inch rack mount brackets.................................................... 2
yScrews for attaching a 19-inch rack mount brackets............... 4
uAudio cable............................................................................... 1
iUSB cable................................................................................. 1
oCD-ROM................................................................................... 1
•DN-F450R Instruction manual
•DMP Mark Editor Installer
•DMP Mark Editor Instruction manual
w
SDHC Logo is a registered trademark.
r
e
y
t
u
i
o
NOTE
Conduction noise or interference noise may cause the DN-F450R to
malfunction. Therefore, when connecting this device to a computer,
connect using the USB cable included.
2
•Before turning the power switch on
Check once again that all connections are correct and that there are
no problems with the connection cables.
•Power is supplied to some of the circuitry even when the unit is set
to the standby mode. When leaving home for long periods of time,
be sure to unplug the power cord from the power outlet.
•About condensation
If there is a major difference in temperature between the inside
of the unit and the surroundings, condensation may form on parts
inside the unit, causing the unit to fail to operate properly.
If this happens, let the unit sit for an hour or two with the power off
and wait until there is little difference in temperature before using
the unit.
•Cautions on using mobile phones
Using a mobile phone near this unit may result in noise. If that
occurs, move the mobile phone away from the unit when it is in
use.
•Moving the unit
Turn off the power and unplug the power cord from the power
outlet.
Next, disconnect the cables connected to other system units
before moving the unit.
nnAttaching the mounting brackets for a 19-inch
1U half-sized rack
Front panel
Part names
and functions
For buttons not explained here, see the page indicated in parentheses ( ).
q
w e
r
t
y
u
i
o
Q0
Connections
•The DN-F450R is half the size of 1U. Attach the included rack
mounting brackets to the DN-F450R. Then it can be mounted in
an EIA 19-inch rack.
1. Remove two screws on the side panel of the DN-F450R.
2. Attach the rack mounting bracket to the DN-F450R with the
included two screws.
Attach the bracket on the opposite side.
Part names and functions
Getting started
Cautions on handling
Setting defaults
Q2
Q3
Q4
Recording
Q1
Q5
qPower switch (ON/OFF)··························································· (11)
wHeadphone jack (PHONES)························································ (8)
eHeadphone volume adjustment switch (LEVEL)····················· (8)
NOTE
Do not turn the volume level too high when using headphones.
rUSB port for PC·········································································· (8)
tSD card slot················································································· (9)
yDisplay························································································· (5)
uDisplay and Menu button
iMark and Lock button (MARK, LOCK)······························ (17, 25)
oMark search and Recording balance buttons
Q2Level over indicator (OVER)···················································· (16)
•Lights red if the recording level exceeds -1dB during recording or
recording pause.
Q3Recording and Manual track button
(REC / M.TRACK)································································ (16, 17)
•Lights red during recording.
•Flashes red while recording is paused.
Q4Stop and Cue button (STOP / CUE)········································ (17)
Q5Play and Pause button (PLAY/PAUSE)··································· (19)
•Lights green during playback.
•Flashes green while playback is paused.
Information
(DISPLAY, MENU/STORE)··················································· (5, 11)
Lights green if the recording level or playback level exceeds the
level set in “Level LED” in the setting menu.
(MARK –/+, REC BAL L/R)·················································· (16, 20)
Specifications
Q0Jog dial (8,
File/Folder
Control function
settings
Press the switch to make it come out. After adjusting the volume,
press the switch back in again.
Q1Level indicator (LEVEL)···························································· (12)
USB mode and
the computer
•Do not cover the top of the unit. Remember, heat is dispersed
from the DN-F450R’s upper surface.
•Set up the installation environment carefully. For example, take
care to protect the DN-F450R from heat from other devices. If
necessary, use forced ventilation. The surrounding conditions
must meet the specifications described in “Specifications” on
vpage 42.
•If the DN-F450R is placed near an amplifier, tuner or other
components, noise (induced hum) or beat interference may result
(especially during AM or FM reception).
If interference occurs, disconnect the DN-F450R or change the
installation place.
•If the unit is not to be mounted in a rack, remove the rack mount
brackets and attach the included feet.
•If there is electronic interference, install DN-F450R separately
from other devices.
Play
nnMounting in a rack
9 / 6, 7 PUSH)··························· (11, 20)
Index
3
Rear panel
q
w
e
r
qAnalog input (balanced) terminal············································· (7)
•XLR type
•Pin assignment: 1 GND, 2 Hot, 3 Cold
•Applicable connector: XLR-3-12C or equivalent
wFS switch··················································································· (11)
•FS (full scale) indicates the maximum input level.
eAnalog input (unbalanced) terminal········································· (7)
•RCA type
rAnalog output (unbalanced) terminal······································ (7)
•RCA type
tREMOTE terminal 1···································································· (8)
Connect a wired remote switch equipped with a monaural
headphone jack.
4
t
y
u
i o
yREMOTE terminal 2···································································· (8)
Connect the microphone remote RC600PMD (sold separately) or
external remote controller.
uRS-232C terminal········································································ (8)
iAC adaptor input terminal························································· (8)
Connect the supplied AC adaptor.
oAttachment hole for AC adaptor cord holder·························· (8)
This holder attachment hole is used to prevent the connected cord
from detaching from the terminal.
The display on the DN-F450R shows information about the DN-F450R and the various SD card attached.
Details of the display differ depending on the operating status (stopped/recording/playing) of the DN-F450R.
Display during stop status
Part names
and functions
Switching the display
Getting started
Display
nn Total remaining capacity display
Press DISPLAY.
Connections
•The display details change each time the button is pressed.
•For details on the display details shown during each operation, see “Display
during stop status” (vpage 5), “Display during recording and recording
pause” (vpage 6), “Display during playback and playback pause” (vpage 6)
qTotal number of files in the current folder
wTotal remaining time display
eDisplayed when Random is set for the preset
e r t
“Play Mode”
* Not displayed when Cont or Single is set.
nnCommon displays during each operation
Setting defaults
rON/OFF indicator for the preset “Repeat”
* Not displayed when it is OFF.
e
q
w
tON/OFF indicator for the preset “Silent Skip”
* Not displayed when it is OFF.
yCurrent date
uCurrent time
w
qDisplay Screen Title Display
wMode Display during Settings
: Random playback mode (vpage 12)
RPT
: Repeat playback mode (vpage 12)
S.S
: Silent skip mode (vpage 12)
y
u
nn Recording setting information display
iRecording input source
Q4 oRecording file format
Q5 Q0“ALC” indication of “Level Cont” preset menu
eRecording time remaining on an SD card
i o Q0 Q1
Q2 Q3
Index
5
Specifications
*This indication is not displayed when the
recording level control is set to “Manual“.
Q1Sampling frequency
Q2ON/OFF indication of “Silent Skip” preset
menu
*This indication is not displayed when the silent
skip is set to OFF.
Q3ON/OFF indication of “Auto Track” preset
menu
*This indication is not displayed when auto track
is set to OFF.
Q4Recording channel
Q5MP3 bitrate
*Not displayed when the recording file format
is PCM.
Information
Remaining
capacity
File/Folder
Control function
settings
RND
USB mode and
the computer
q
Play
nn Current time/Date display
Recording
If the remaining time exceeds 100 hours, “99: 59 :
59” is displayed.
Display
Display during recording and recording pause
nn Recording elapsed time
display
Display during playback and playback pause
nn Playback elapsed time
display
qFile name during playback
wPlayback elapsed time
ePlayback position on a file
qFile name during recording
wRecording elapsed time
•Position is not displayed for files for files
recorded as VBR.
q
w
q
nn Total remaining recording
time display
eTotal remaining recording time
•The remaining time changes depending on
the recording format selected in the preset
menu.
w
e
nn Playback remaining time
display
rPlayback remaining time
•“VBR” is displayed when the playback file is
VBR.
If the remaining time exceeds 100 hours, “99: 59 :
59” is displayed.
If the remaining time exceeds 100 hours, “99: 59 :
59” is displayed.
r
e
nn Playback output level display
nn Recording input level
display
rRecording input level
tLevel meter peak hold value (largest of L/R is
tPlayback output level
yLevel meter peak hold value (largest of L/R is
displayed)
r
yRecording input source
uRecording file format
i“ALC” indication of “Level Cont” preset menu
t
nn Recording setting
information display
Q2
Q3
y u i o
6
Q0 Q1
displayed)
*This indication is not displayed when the
recording level control is set to “Manual“.
oSampling frequency
Q0ON/OFF indication of “Silent Skip” preset menu
*This indication is not displayed when the auto
track is set to OFF.
Q1ON/OFF indication of “Auto Track” preset menu
*This indication is not displayed when the silent
skip is set to OFF.
Q2Recording channel
Q3MP3 Bitrate
*Not displayed when the recording file format
is PCM.
t
y
nn File information display
uFile created date
iPlayback channel
oMP3 bitrate
Q1
•This indication is not displayed when the file
format is PCM.
Q0Number of marks
Q1Sampling frequency/Quantized bit number
u i o
Q0
NOTE
Connecting to a computer
Analog connection (Unbalanced connection)
Connect line-level analog inputs/outputs to the analog (unbalanced)
input/output terminals.
Setting defaults
Cables used for audio connection
Amp
Mixer
Preamp
R
CD, MD
Select the cables according to the equipment being connected.
R
AUDIO
IN
L
R
Analog Connection (RCA)
L
L
L
Red
R
R
Analog Connection (XLR
L
R
File/Folder
Control function
settings
Stereo audio cable (Included)
R
Analog connection (Balanced connection)
Connect line-level analog inputs/outputs to the analog (balanced) input
terminals.
Balanced cable (Sold separately)
Cable for connecting to the computer
USB mode and
the computer
Audio cables
When you connect a computer using a USB cable to the USB port,
you can easily copy audio files from an SD card on DN-F450R to the
computer.
The USB connection is only enabled when the DN-F450R is stopped
(recording/playback/menu display are disabled).
For details on the USB mode, see “USB mode (Connection between
DN-F450R) and the computer” (vpage 21).
Play
AUDIO
OUT
L
R
L
Recording
L
White
Connect the computer USB cable to the USB port on the DN-F450R.
Connections
Preparations
Audio connections
Part names
and functions
•Do not plug in the power cord until all connections have been
completed.
•When making connections, also refer to the operating instructions
of the other components.
•Insert the plugs securely. Loose connections will result in the
generation of noise.
•Be sure to connect the left and right channels properly (left with
left, right with right).
•Connect the cables to the correct input and output terminals.
•Do not bundle power cords together with connection cables. Doing
so can result in humming or noise.
•DN-F450R is not equipped for connecting a microphone.
Getting started
Connections
Information
1:GND
2:Hot
3:Cold
USB cable (Included)
Specifications
CDR, CD
L
AUDIO
OUT
R
Index
7
Connecting the external control
terminal
nnAttaching the power cord holder
Connecting headphone
Connect the headphones to the headphone jack (PHONES).
Remote terminal
the plug of the AC adaptor to the DC power
1 Connect
inlet.
nnREMOTE1
•Connect a wired remote switch equipped with a monaural
headphone jack to the REMOTE terminal 1 on DN-F450R.
•When using two sets of this unit, connect them at each
REMOTE terminal 1 using a cable with a monaural headphone
jack.
the hole of the power cord holder to the cord
2 Pass
of the AC adaptor. Then insert the holder to the
mounting hole.
You can use five remote options using a wired remote switch
(“REMOTE terminal 1” (vpage 26)).
You can also perform the Cascade recording function by connecting
two DN-F450R recorders. For details on the Cascade recording
function, see page 26.
nnREMOTE2
Connect the microphone remote RC600PMD (sold separately) or
external remote controller to REMOTE terminal 2.
Mounting hole
When you press the headphone volume adjustment switch (LEVEL),
the switch will spring out. After adjusting the volume, press the switch
back in again.
NOTE
To prevent hearing loss, do not raise the volume level excessively
when using headphones.
Connecting the AC adaptor
Insert the AC adaptor when all other connections are completed.
the holder to the DN-F450R using the included
3 Fix
screw.
For the operation using REMOTE terminal 2, see page 27.
RS-232C terminal
Connect an RS-232C straight cable with a 9-pin D-sub connector to the
RS-232C serial terminal.
Power cord
(supplied)
To AC outlet
(AC 120 V, 60 Hz)
NOTE
RS-232C control allows you to perform external control from
the host. For details on RS232C control, see “RS232C control”
(vpage 28).
8
•Be sure to insert the power plug firmly into the AC outlet. If the plug
is not properly inserted, it could cause a malfunction or noise.
•Do not unplug the power cord while the unit is operating.
•Do not use a power cord other than the cord supplied with this unit.
Inserting an SD card
Getting started
Mounting SD card
Cautions on SD card
SD card
•Do not used a cracked or warped SD card or one that has been
repaired with adhesive.
•“Loading...“ appears on the display when SD card is mounted
or loaded. Do not remove the SD card while this message is
displayed.
Part names
and functions
Insert an SD card all the way in to the SD card slot.
Connections
Setting defaults
Recording
Insert an SD card all the way into the slot until it clicks.
Play
Removing the SD Card
USB mode and
the computer
Check beforehand that playback from or recording to the SD card is
stopped.
Press the SD card.
•The SD card springs out. Remove the card.
File/Folder
Control function
settings
Information
Specifications
NOTE
Removing the SD card during recording may result in incorrect writing
of the recorded file.
Do not remove the SD card during recording.
Index
9
Setting defaults
Menu list
For details on the menu operations, see “Menu operations” (vpage 11). Furthermore, for detailed explanations of each item, see the table on the Reference Page.
Setting
Detailed items
items
01 File List
02 Presets Preset-1 01 Select
Input
/Preset-2 02 Edit
Rec Format
/Preset-3
RecChan (Record Channel)
Samp Freq (Sampling Frequency)
LevelCont
Level LED
Auto Track
Auto Mark
SilentSkp (Silent Skip)
SilentLvl (Silent Level)
Skip Back
Play Mode
FinishMod (Finish Mode)
Repeat
PowOnPlay (Power On Play)
Auto Cue
Remote1
03 Rename
03 Display Contrast
Time Form
Date Form
File Sort
Language
Default
04 Time/Date
05 Utility
01 Load Settings
02 Save Settings
03 Media Format
06 F/W Version
Machine ID
Default
Contents
Manages and sets files and folders.
Switches to the selected preset number.
Sets the audio input source for recording.
Sets the audio format (MP3 or PCM) for recording.
Sets the number of recording channels.
Sets the sampling frequency for recording.
Sets the adjustment method for the recording level.
Sets the input/output level for the Level display lit on the main unit.
Sets the recording time for one file.
Sets the writing of marks for silent detection.
Sets recording pause or recording restart by silent detection.
Sets the silence level for Auto Mark and Silent Skip.
Sets the amount of time used for skipping back a track during playback or pause.
Sets the playback mode.
Sets the stop status when playback is stopped.
Sets repeat playback.
Sets the operation when the power is switched ON.
Sets the settings for the auto que function.
Sets the operation to be performed when a control signal is received from the device
connected to Remote Terminal 1.
Sets the machine ID information included in the file name.
For each preset number, the preset setting contents are reset to their default value.
Preset names can be changed to the desired name.
Sets the contrast of the display.
Sets the type of the current time display.
Sets the display order of the date.
Sets the sorting method for the file listing order.
Selects the display language for the file names and folder names.
Returns all settings details for “03 Display” to the default values.
Sets the current date and time.
Reads the preset menu and display menu setting data stored in the SD card, and replaces the
DN-F450R settings with the setting data from the SD card.
Saves all of the preset menu and display menu setting data from the DN-F450R onto the SD
card.
Formats the SD card.
Displays the DN-F450R’s current firmware version.
Reference
page
22
11
11
11
11
11
12
12
12
12
12
12
12
12
12
12
12
13
13
StartPaus
StartPaus
StartPaus
13
13
13
14
14
14
14
14
14
14
1
—
Preset-1
1
—
Preset-2
5
12H
M/D/Y
Date
Eng
1
—
Preset-3
15
15
15
15
NOTE
When you perform the Default operation on menus to initialize the settings for presets, the presets will be set back to the default values as shown on the right in the table.
10
Default values of each preset
Preset-1
Preset-2
Preset-3
—
—
—
—
—
—
Bal
Bal
Bal
MP3-128
MP3-320
PCM-16
Stereo
Stereo
Stereo
44.1k
44.1k
48k
ALC
Manual
Manual
-6dB
-6dB
-6dB
Off
Off
Off
Off
Off
Off
Off
Off
Off
-38dB
-38dB
-38dB
2sec
2sec
2sec
Cont
Cont
Cont
Next
Next
Next
Off
Off
Off
Off
Off
Off
Off
Off
Off
The following uses are assumed for
each of the preset default values.
•Preset-1: R
ecording at conferences
etc
•Preset-2: C
ompressed recording for
music
•Preset-3: U
ncompressed recording
Menu operations
Settings for recording or playback (Presets) vpage 11
Display settings (Display) vpage 14
DISPLAY STOP Jog dial
Connections
Power switch
Manages and sets files and folders (File List) vpage 22
Part names
and functions
DN-F450R can record audio input on an SD card in the unit. DN-F450R is equipped with various
recording and playback settings so that you can use wide-ranging applications to record and play
back.
DN-F450R also allows you to program up to three preset settings. Use this feature to preset
recording and playback setting patterns in advance, according to your purpose. You can switch the
settings for a specific purpose by simply selecting the preset number.
Getting started
Setting defaults
Time & date settings (Time/Date) vpage 14
Setting defaults
Utility function (Utility) vpage 15
Checking the firmware Version (F.W Version) vpage 15
The following level menu list is displayed.
•When you select “File List”, a file list appears. For file and folder management and setting methods,
see “File/Folder settings” (vpage 22).
4 Select the setting item that you want to change, and press the jog dial.
The setting item is chosen.
•To continue to set other items, perform the operation in step 3.
•To return to the upper level menu from the menu item currently being set, press and hold the jog dial.
The changed settings are saved, and the DN-F450R returns to the stopped status.
Bal: Records the XLR analog input terminal source.
Unbal: Records the RCA analog input terminal source.
11
Index
When you perform recording by setting the audio input source to “Bal”,
be sure to set the FS switch on the rear panel to the maximum input level
(+24dBu or 0dBu) before you start recording.
Rec Format
MP3-320 / MP3-256 / MP3-192 / MP3-128 / MP3-64 /
Selects the audio format
PCM-16
(MP3 or PCM) for recording. •Indicated bitrate values are those when you record as a stereo file.
•Select the bitrate for the MP3 format.
•Select the quantized bit number for the PCM format.
RecChan (Rec channel)
Stereo: Records as a stereo (2-channel) file.
Select whether to record as Mono: Records as a monaural (1-channel) file.
a stereo file or a monaural
file.
Samp Freq
44.1k: Records at 44.1kHz.
(Sampling Frequency)
48k: Records at 48kHz.
Selects the sampling
frequency for recording.
Specifications
To cancel the settings, press the STOP button before saving the settings.
Input
Selects the audio input
source for recording.
Setting details
Information
5 After you finish all settings, press DISPLAY.
Setting Items
File/Folder
Control function
settings
3
Rotate the jog dial to select the setting item that you want to change, and press the
jog dial.
These settings are performed independently for each of the 3 presets (Preset-1/Preset-2/ Preset-3).
Firstly, select the preset number that you want to set from “02 Presets” in the menu.
Next, select “02 Edit”.
USB mode and
the computer
The menu list is displayed.
•For details on each of the setting items in the menu, see “Menu list” (vpage 10).
Settings for recording or playback (Presets)
Play
The power of DN-F450R is switched ON.
Recording
1
2 While DN-F450R is stopped, press DISPLAY for more than 1 second.
Press the power switch.
Setting defaults
Setting Items
LevelCont
Select the adjustment
method for the recording
level.
Level LED
Sets the input/output level
for the Level display lit on
the main unit.
Auto Track
Creates a new file for each
recording time set and
continues recording.
Auto Mark
When input lower than the
input level set in “10 Silent
Level”
continues for more than
3 seconds, marking
information is written
into the file. This mark is
useful when searching
for a specific point during
playback.
SilentSkp
(Silent skip)
If input lower than the
input level set in “10 Silent
Level” continues for more
than 3 seconds, recording
is temporarily stopped.
Recording is restarted when
input above the set level is
received again.
12
Setting details
Setting Items
Manual : The recording level can be adjusted to the desired value.
ALC: DN-F450R automatically adjusts the recording level.
When the ALC setting is set to “ON”, and when there is no input signal,
the minimum value of the Recording input level meter may light up, which
will not cause a problem to the recording.
-6dB / -12dB / -20dB / -38dB / -54dB
You can use this setting for various purposes besides the level meter on
the display. For example, confirmation of the recording peak level and
confirmation of the presence or absence of input signals.
Off: Record without creating a new file.
1 min/ 5 mins/ 10 mins/ 15 mins/ 30 mins/ 1 hour/ 2 hours/ 6 hours/
8 hours/ 12 hours/ 24 hours
SilentLvl
(Silent Level)
Sets the silent level when
“08 Auto Mark” or “09
Silent Skip” is set to on.
Skip Back
Sets the amount of time
used for skipping back a
track.
Play Mode
Selects the play mode.
NOTE
•If the size of the recorded file exceeds 4GB, recording is continued on a
new file irrespective of the set time.
•There could be sound cutoffs for a short period of time between files
depending on the capacity of a recorded file.
Off : Turns the auto mark function off.
On: Turns the auto mark function on.
•A maximum of 30 marks can be written to one file.
•Marking numbers are attached in numerical order starting from 1.
•Marks can also be added manually. For details, see “Adding marks
(Marking)” (vpage 17).
•Marks can be edited using the “DMP Mark Editor” software included.
For details, see the instruction manual on the included CD-ROM.
Off: Turns the silent skip function off.
On: Turns the silent skip function on. The
display.
S.S
FinishMod
(Finish Mode)
Sets the stop status when
playback is stopped.
Repeat
Sets the file to repeat
playback.
icon is shown on the
If recording is paused by the silent skip function, the
the display flashes (vpage 5).
S.S
indicator on
PowOnPlay
(Power On Play)
Sets the operation
performed when the
power to the DN-F450R is
switched on when SD card
is mounted.
Setting details
–60dB / –54dB / –38dB / –20dB
0.5 sec – 10 sec: Sets the time by increments of 0.5 seconds.
10 sec – 60 sec: Sets the time by increments of 5 seconds.
The skip back function rewinds a track for the set amount of time from the
current playback position during playback or pause. This function is useful
when you perform remote control functions using the Remote 2 expanded
function switches. For details on the remote control, see “Enhancement
for REMOTE terminal 2” (vpage 27).
Cont (Continuous) : P
lays back files continuously in order. Playback stops
when the final file has finished playing.
Single: W
hen the file has finished playing, it is stopped in the stop position
set in “Finish Mode“.
Random : P
lays files in random order. Playback stops when all files have
finished playing. When “Random” is set, the RND icon is
shown on the display.
Next: When the STOP button is pressed during file playback, playback is
stopped at the head of the next file.
Recue: W
hen the STOP button is pressed during file playback, playback is
stopped at point where playback was previously started.
Off: R
epeat playback is not performed.
icon is shown on the
On: R
epeat playback is performed. The RPT
display.
The following operation is performed according to the play mode set in
“Play Mode“.
•When “Cont” is set, all of the files are repeated.
•When “Single” is set, the file that is currently being played back is
repeatedly played back.
•When “Random” is set, when all files have finished playing, random
playback is started again in a different order. This operation is repeated.
Off: Stops the operation when the power is switched ON.
On: Files are automatically played back when the power is switched ON.
Setting Items
Setting details
File/Folder
Control function
settings
Information
NOTE
The machine ID is common for the Preset-1 to Preset-3 settings. If it is
changed, the new machine ID is applied to all Preset-1 to Preset-3 settings.
Preset-1/ Preset-2/ Preset-3
Yes : Resets the selected preset name and its setting values to their
default values.
No: Values are not returned to the defaults.
Specifications
Index
Default
(Preset Default)
Preset settings are returned
to the default values for
each preset.
USB mode and
the computer
•By default, presets have a name that is eight characters long. To rename
an existing name, delete the currently set characters first and then enter
a new name.
•The following characters and symbols can be entered.
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghij
k l m n o p q r s t u v w x y z (space)! # $ % & ’ ( ) + , – ; = @ [ ] ^ _ ’ { }
~0 1 2 3 4 5 6 7 8 9
¡ ¢ £ ¤ ¥ ¦ § ¨ © ª ” ¬ ­® ¯ °±² ³´ µ¶ · ¸ ¹ º ” ¼ ½ ¾ ¿ À Á Â Ã Ä Å Æ Ç È Ê
Ë Ì Í Î Ï Ô Õ Ö× Ø Ù Ú Û Ü Ý Þ ß å æ ç è é é ê ë ì í î ï ö÷ ø ù ú û ü ý þ ÿ
The characters on the above underlined part, from ¡ to ÿ, are Latin
alphabets. Alphabets are available when the display language is set to
“Eng”, but not available when it is set to “Jpn”. For information about
the display language, refer to “Language” (vpage 14).
•To cancel without saving the entered characters, press the MARK button
before saving.
Play
•Since the default value of the machine ID is “1”, the name of the first
recorded file will be 1001.MP3 (when recorded in MP3 format).
•If the machine ID is set as “aaaaa”, the name of the first recorded file
will be “aaaaa001.MP3“. If the machine ID is o characters, the file name
will be 001.MP3. (When recorded in MP3 format)
nn Deleting Characters
qPlace the cursor to the right of the character you want to delete the
MARK+ and MARK– buttons.
wPress PLAY/PAUSE.
•Deletes a character on the left of the cursor.
Recording
Machine ID
Sets the machine ID
information included in the
file name.
A maximum of 8 characters
can be input.
Setting details
nn Entering Characters
qPlace the cursor in the position where you want to insert characters
using the MARK+ and MARK– buttons.
wRotate the jog dial to select the character to input.
ePress the jog dial to enter the character.
rRepeat steps q to e until all characters are entered.
tPress the jog dial when the entry is completed.
•Saves the entered characters.
Setting defaults
Remote1
Sets the DN-F450R
operation to be performed
when a switch control
signal is received from an
external device connected
to Remote Terminal 1.
For details on the REMOTE
terminal 1, see “REMOTE
terminal 1” (vpage 26).
Setting Items
03 Rename
Preset names can be
renamed according to
their use. A maximum of 8
characters can be input.
Connections
NOTE
If the silent portion cannot be detected at the beginning of a file even
after 20 seconds, the auto cue operation is automatically performed at the
beginning of the file.
StartPaus: During recording or playback, recording or playback starts
when the switch of the external device is closed (short), and
recording or playback is paused when the switch is opened
(open).
StrtPseTr: During recording, recording starts when the switch of the
external device is closed (short), and paused when the switch
is opened (open). Furthermore, if the switch is closed (short)
again while recording is paused, the file is updated to a new
file and recording restarts.
Mark: During recording or playback, a mark is added when the switch of
the external device is closed (short).
ManualTrk: During recording, if the switch of the external device is
closed (short), the file is updated to a new file and recording
continues.
Cascade: W
hen you perform this function, connect another DN-F450R to
this DN-F450R (“Cascade recording” (vpage 26)).
If there is no recording space remaining on the SD card in the
first DN-F450R while recording, this function automatically
continues recording on the second DN-F450R.
Preset-1/ Preset-2/ Preset-3
Firstly, select the preset number that you want to rename from “02 Presets” in the menu.
Next, select “03 Rename“.
Part names
and functions
Auto Cue
Off: Turns the auto cue function off.
Sets the auto cue function. –48dB / –42dB / –36dB
This item also sets the silent
level of the silent portion at
the beginning of a file.
The auto cue function temporarily stops playback at the point where
playback restarts after skipping the silent portion at the beginning of a file.
nnRenaming presets
Getting started
Setting defaults
13
Display settings (Display)
Time & date settings (Time/Date)
Settings can be performed for the display.
Rotate the jog dial to select “03 Display“.
Setting Items
Contrast
Sets the contrast of the
display.
Time Form
Sets the type of the current
time display.
Date Form
Sets the display order of the
date.
Sets the clock on the DN-F450R.
Rotate the jog dial to select “04 Time/Date“.
Setting details
1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10
The higher the setting value, the brighter the display becomes.
12H: Switches to the 12-hour display (AM/PM).
24H: Switches to the 24-hour display.
M/D/Y: Displays the date in Month/Date/Year order.
D/M/Y: Displays the date in Date/Month/Year order.
The factory setting is “D/M/Y” for Europe.
File Sort
Selects the sorting method
for the file listing order.
Language
Selects the display language
for the file names and folder
names.
Default
Resets the Display Menu
settings to the default
values.
14
Alpha (Alphabet) :Files are arranged in the order of symbols, numbers,
and alphabets.
Date: Files are arranged in date order.
Eng : Displays the file names and folder names in English.
Jpn: Displays the file names and folder names in Japanese.
•When “Eng” is set, Japanese file names and folder names are not
displayed correctly.
•When this setting is changed, the unit is restarted in order for the setting
change to be read.
Yes: Values are returned to the defaults.
No: Values are not returned to the defaults.
Setting Items
04 Time/Date
Sets the built-in clock time.
Records the time of this
built-in clock as time data
(recording start time) in a
file.
Setting details
01:00 AM: Enter the time.
Jan 01/2010: Enter the year, month and date.
nn Entering Numbers
qPlace the cursor in the position where you want to insert numbers
using the MARK+ and MARK– buttons.
wRotate the jog dial to select the number to input.
eRepeat steps q and w to enter all of the numbers.
rPress the jog dial when the entry is completed.
•Save the settings, and the screen returns to the menu screen.
To cancel without saving the entered characters, press the MARK
before saving.
Checking the firmware version (F.W Version)
Setting Items
“DN-F450Rpreset.txt”, which is located in the root directory in the media,
is loaded.
nn Operation
qRotate the jog dial to select “Save Settings”, and press the jog dial.
•“Save?” is displayed.
wRotate the jog dial to select “Yes”, and press the jog dial.
•The preset setting data starts being saved.
•When the save process is complete, “Completed” is displayed, and
the DN-F450R returns to the stopped state.
Recording
Play
USB mode and
the computer
The file is saved as “DN-F450Rpreset.txt” in the root directory in the
media. When this operation is performed, the existing “DN-F450Rpreset.
txt” data is overwritten.
nn Operation
qRotate the jog dial to select “Media Format”, and press the jog dial.
•“Format SD” is displayed.
wRotate the jog dial to select “Yes”, and press the jog dial.
•Formatting of the SD card starts.
•“Executing...” is displayed during the formatting.
•When the format process is complete, “Completed” is displayed,
and the DN-F450R returns to the stopped state.
File/Folder
Control function
settings
03 Media Format
Formats the SD card.
Setting defaults
02 Save Settings
Stores all of the current
preset setting data on the
SD card. To read the saved
data onto a different DNF450R, use the operation in
“01 Load Settings“.
Setting details
nn Operation
qRotate the jog dial to select “Load Settings”, and press the jog dial.
•“Load?” is displayed.
wRotate the jog dial to select “Yes”, and press the jog dial.
•The preset setting data starts reading.
•“Executing...” is displayed during the read process.
•When the read process is complete, “Completed” is displayed, and
the DN-F450R returns to the stopped state.
Connections
01 Load Settings
After reading the preset
setting data stored on a SD
card, changes the settings
of DN-F450R to the setting
data on the SD card.
This function is used when
more than one DN-F450R
unit are used together to
set all units with the same
presets.
Rotate the jog dial to select “06 F/W Version“.
•Displays the DN-F450R’s current firmware version.
Part names
and functions
Utilities perform such operations as saving and reading the various setting data for the DN-F450R
and formatting the SD card.
Rotate the jog dial to select “05 Utility“.
Getting started
Utility function (Utility)
Information
NOTE
Specifications
Before using an SD card, be sure to format it on DN-F450R. If the SD
card is formatted on a computer, this could cause sound cutoffs during
recording.
Index
15
Recording
This section explains how to specify a SD card folder for a recording file and to record into that folder.
Power switch
DISPLAY
MARK REC BAL L, R
Jog dial
Recording
1 Press REC/M.TRACK to pause recording.
•REC/M.TRACK flashes red.
•Monitors the input source set for “Input” in the preset menu.
2 Adjust the recording level using REC LEVEL.
REC/M.TRACK
Selecting a folder to store recorded
files
1 Press the power switch.
Press and hold DISPLAY for more than 1 second
2 while
stopped.
“File List” in the menu list and press the jog
3 Select
dial.
4 The folder list is displayed.
STOP
PLAY/PAUSE REC LEVEL
“01 Select” in the folder list menu, and rotate
6 Select
the jog dial.
The power of DN-F450R is switched ON.
•For details on how to display the folder list, see “Displaying the File
Menu (Preparation)” (vpage 22).
5
Rotate the jog dial to select the folder in which you
want to save the recording file, and press the jog dial.
•To save a recorded file in a newly created folder, see “Creating
folders (2 Make Folder)” (vpage 24).
16
•Choose the folder in which to store the recorded file, and display
the file list of that folder.
STOP, and the screen returns to the previous
7 Press
screen.
NOTE
To record on an SD card, be sure to format it on DN-F450R before
recording. If the SD card is formatted on a computer or is used for
recording without formatting it, this could result in sound cutoffs
during recording. For details on the formatting procedure, see “03
Media Format” (vpage 15).
•To adjust the recording level, change “LevelCont” in the preset
menu to “Manual”.
•When you adjust the recording level, make sure that the peak level
is not 0dB by monitoring the level meter and level over display
(LEVEL).
•When the “Level Cont” preset menu is set to “ALC”, you cannot
adjust the recording level using REC LEVEL.
3 Use RECBAL L, R to adjust the recording balance.
•To adjust the recording balance, set “LevelCont” in the preset
menu to “Manual”.
•When RECBAL L is pressed, the R (right) volume decreases by 1dB.
When R is pressed, the L (left) volume decreases.
•This setting is maintained after the power is switched off.
•When the pre-recording adjustments are completed, stop the
source playback, and playback the recording source again from the
start.
•When the “Level Cont” preset menu is set to “ALC”, you cannot
adjust the recording level using RECBAL L, R.
4 Press REC/M.TRACK to start recording.
REC/M.TRACK changes to being lit red.
Operations during recording
Getting started
Recording
Add a file during recording (Manual track)
Part names
and functions
The manual track function divides tracks at the desired place during
recording. Recording continues as a new file.
Press REC/M.TRACK during recording.
•You can adjust the recording level and balance even during
recording.
When “Auto Mark” in the preset menu is set to “On”, a mark
is added at the point where the recording is resumed from the
paused status.
A mark is added at the point where the button was pressed.
•A maximum of 30 marks can be written to one file.
•Marks can also be added automatically. For details, see “Auto Mark”
(vpage 12) in the preset menu.
•Marks can be edited using the “DMP Mark Editor” software
included.
For details, see the instruction manual on the included CD-ROM.
Specifications
The amount of recording capacity required differs depending
on the set recording format, number of recording channels, and
sampling frequency.
To ensure that you do not run out of recording capacity during
recording, check the recordable time in the “Recording time chart”
(vpage 18) before starting recording. For details on checking
various setting details, see “Display” (vpage 5).
Press MARK during recording.
Information
nnCautions on recording capacity
By writing marking information to files, during playback you can search
for marks and start playback from specific locations. By using this
method, you can create specific search points within files without
splitting files.
For details on how to search and playback from marks, see “Searching
for Marks” (vpage 20).
File/Folder
Control function
settings
Press PLAY/PAUSE during recording.
•Recording is paused, and REC/M.TRACK flashes red.
•Press REC/M.TRACK again to resume recording on the same file.
Adding marks (Marking)
USB mode and
the computer
nnTo pause recording
Play
Press STOP.
•Recording stops, and REC/M.TRACK goes out.
•The recorded file information is displayed. At this time, you can
playback the recorded file by pressing PLAY/PAUSE.
•When the STOP button is pressed again, the total file number or
overall remaining time is displayed.
NOTE
•There could be sound cutoffs for a short period of time between files
depending on the capacity of a recorded file.
•If the size of a file being recorded reaches 4GB, recording is
continued by automatically switching to a new file.
•The manual track function is not available for two seconds after
starting recording.
Recording
nnTo stop recording
Files can also be divided at a specified amount of time. For details, see
“Auto Track” (vpage 12) in the preset menu.
Setting defaults
If there are no folders in the SD card, a folder “MPGLANG” is
automatically created, and recorded files are stored in that folder. For
details on transferring that file into a different folder, see “Moving files
(06 Move)” (vpage 23).
Connections
•The file is cut at the point where the button is pressed, and
recording continues in a new file.
Index
17
Operations during recording
Recording time chart
All of the recording times are approximate times. Differences occur between SD card made by different manufacturers.
nnRecording time
Stereo file
Setting
Recordable time (Hours: Minutes)
Bitrate
1GB
2GB
4GB
8GB
16GB
32GB
PCM-16 (48kHz)
1536 kbps
1:29
2:58
5:56
11:51
23:42
47:24
PCM-16 (44.1kHz)
1411 kbps
1:37
3:13
6:27
12:54
25:48
51:36
320 kbps
7:07
14:13
28:27
56:56
113:47
227:33
MP3-320
MP3-256
256 kbps
8:53
17:47
35:33
71:07
142:13
284:27
MP3-192
192 kbps
11:51
23:42
47:24
94:49
189:38
379:16
MP3-128
128 kbps
17:47
35:33
71:07
142:13
284:27
568:53
MP3-64
64 kbps
35:33
71:07
142:13
284:27
568:53
1136:07
Monaural file
Setting
Recordable time (Hours: Minutes)
Bitrate
1GB
2GB
4GB
8GB
16GB
32GB
PCM-16 (48kHz)
768 kbps
2:58
5:56
11:51
23:42
47:24
94:49
PCM-16 (44.1kHz)
705 kbps
3:13
6:27
12:54
25:48
51:36
103:12
MP3-320
160 kbps
14:13
28:27
56:53
113:47
227:33
455:07
MP3-256
128 kbps
17:47
35:33
71:07
142:13
284:27
568:53
MP3-192
96 kbps
23:42
47:24
94:49
189:38
379:16
758:31
MP3-128
64 kbps
35:33
71:07
142:13
284:27
568:53
1137:47
MP3-64
32 kbps
71:07
142:13
284:27
568:53
1137:47
2275:33
If the recording conditions are the same, the recording time of a monaural file will be twice longer than the recording time of a stereo file.
18
Power switch
DISPLAY
The power of DN-F450R is switched ON.
Press STOP/CUE
During playback
Head of the next file
Playback position
B
When Recue is set
When Next is set
nnTo pause playback
•For details on how to display the folder list, see “Displaying the
folder menu (Preparation)” (vpage 23).
Choose the folder to play to display the file list of that folder.
Information
the jog dial to select the folder that you want
5 Rotate
to play, and press the jog dial.
“01 Select” in the folder list menu, and rotate
6 Select
the jog dial.
File/Folder
Control function
settings
Press PLAY/PAUSE during playback.
•Playback is paused, and PLAY/PAUSE changes to flashing green.
•When PLAY/PAUSE is pressed again, playback is restarted.
USB mode and
the computer
•Start playback.
•PLAY/PAUSE lights green.
A
Play
and press PLAY/PAUSE or the jog dial.
Press PLAY/PAUSE
Recording
1 Press the power switch.
Press and hold DISPLAY for more than 1 second
2 while
stopped.
Press STOP, and the screen returns to the previous
Select “File List” in the menu list and press the jog
7
screen.
3 dial.
Playback
4 The folder list is displayed.
Rotate the jog dial to select the file that you want to play,
When Next is set : When
STOP/CUE is pressed during file
playback, playback is stopped at the head
(point B) of the next file.
When Recue is set : W
hen STOP/CUE is pressed during file
playback, playback is stopped at point where
playback was previously started (point A).
Setting defaults
Selecting the folder to playback
Press STOP/CUE.
•Playback stops, and PLAY/PAUSE goes out.
•The playback position is moved to the playback start position set
for “Finish Mode” in the preset menu and stops playback.
•When STOP/CUE is pressed again, DN-F450R is put in stop status
and the total number of files or total remaining time is displayed.
•The playback stop position varies as follows depending on the
setting for “Finish Mode” in the preset menu.
Connections
PLAY/PAUSE
nnTo stop playback
Part names
and functions
STOP/CUE
Jog dial
Getting started
Play
DN-F450R can play back files in VBR (Variable Bit Rate) format.
Specifications
Index
19
Operations during playback
MARK
Power switch
MARK +/–
Jog dial
Dividing a file
You can divide a recorded file at the specified position.
a file search, pause playback at the position
1 Perform
where you want to divide a file, and then press
REC/M.TRACK.
REC/M.TRACK
File switching (8, 9)
Rotate the jog dial during playback or while stopped.
•Rotating in a clockwise direction switches to the next file.
•Rotating in the anticlockwise direction switches to the start of the
current file, and then to previous files.
Fast forward and fast rewind
(Search 6, 7)
During playback, press and hold the jog dial and rotate it
clockwise or counterclockwise.
•Rotate the jog dial counterclockwise for fast rewind playback.
•Rotate the jog dial clockwise for fast forward playback.
•The operation changes as indicated below depending on how many
times you press the jog dial.
•While holding in the jog dial, press it once
Double speed
•While holding in the jog dial, press it twice 10 x speed
•While holding in the jog dial, press it 3 times 50 x speed
•While holding in the jog dial, press it 4 times 100 x speed
•Sound is not output at 50 x and 100 x speeds.
•When fast forward search is used to the end of the last file, or when
fast rewind search is used to the start of the first file, the file pauses.
NOTE
•Search cannot be performed on files that are recorded using VBR.
•If a VBR file is found during the search process, the search ends at
the VBR file.
20
Add marks (marking)
By writing marking information in files, you can search for marks and
play back from a certain point.
Press MARK during playback and pause.
“Divide?” is shown in the display.
•If you do not wish to divide the file, rotate the jog file to “No”, and
push the jog dial.
the jog dial to select “Yes”, and press the jog
2 Rotate
dial.
“Executing...” is displayed, and the file is divided.
•When the division process has finished, “Completed” is displayed,
and playback is stopped at the start of the second of the divided
files.
A mark is added at the point when you press it.
•You can write up to 30 marks in a file.
•You can edit marks with the supplied software “DMP Mark Editor”.
For more information, see the instruction manual for “DMP Mark
Editor” on the supplied CD-ROM.
NOTE
•You cannot add marks to MP3 files that are not recorded by
DN-F450R.
•You cannot add marks when files are recorded in VBR.
Searching for Marks
During playback or pause, press MARK+ or MARK–.
•When MARK+ is pressed, the tracks are forwarded to the next
marked point and paused.
•When MARK– is pressed, the system returns to the previous
marked point and is paused.
•“_A” is appended to the name of the first division file and “_B” is
appended to the name of the second division file.
e.g.) When a file named 1001.MP3 is divided
Divide
1001_A_A.MP3
Divide
1001_A.MP3
1001_A_B.MP3
1001.MP3
1001_B_A.MP3
1001_B.MP3
1001_B_B.MP3
Divide
The original file is not deleted even if it is divided. In the above case,
there are total of seven files after the division.
•You can also divide a file by pressing REC/M.TRACK during playback.
NOTE
•Files with file names that contain more than 253 characters cannot
be divided.
In this case, “Long Title” appears in the display. Rename the file,
and try dividing again.
•VBR files cannot be divided.
NOTE
You can use a computer to edit the files and marks recorded on a
SD card of DN-F450R with the supplied Windows application program
“DMP Mark Editor”.
GMain functionsH
•Playback, copy, divide, combine, and delete files
•Move, add, and delete marks
Do not remove mounted SD card from the DN-F450R while it is
connected to the computer. Doing so may cause the data on the SD
card to become corrupt, and may damage the SD card.
Setting defaults
•The computer connected to the DN-F450R must be running one of
the following operating systems.
WindowsXP, Windows Vista, Windows7, MacOS X
•When DN-F450R is connected to a computer, an SD card mounted
on DN-F450R is recognized as a removable disc by the computer.
•After the required tasks for USB mode are completed, remove
the USB cable from DN-F450R. The USB mode is canceled and
DN-F450R returns to the stopped state.
nnAbout DMP Mark Editor
Connections
Connecting to a computer
5
Remove the USB cable.
Recording
1 Switch on the computer.
Play
•For details on how to operate the computer, see the computer’s
operating manual.
USB mode and
the computer
2 Press the power switch on the DN-F450R.
3 Mount the SD card into the DN-F450R.
The DN-F450R power switches ON.
4
While the DN-F450R is stopped, connect the
computer to the DN-F450R PC USB port using the
USB cable provided.
•For details on the installation and operation procedures of the DMP
Mark Editor, see the DMP Mark Editor Instruction Manual stored in
the supplied CD-ROM.
•When the connection is complete, the DN-F450R display looks as
follows.
File/Folder
Control function
settings
•For details on the mounting the SD card, see “Mounting SD card”
(vpage 9).
Part names
and functions
When a computer is connected using the provided USB cable to
the USB port on the DN-F450R, the following operations can be
performed.
•Transfers data stored on an SD card of DN-F450R to a computer and
plays back and copies data on the computer.
•Transfers MP3 or WAV files stored in a computer to an SD card of
DN-F450R.
Getting started
USB mode (Connection between DN-F450R) and the computer
Information
Specifications
•The computer will recognize the SD card mounted on DN-F450R
as a removable disc.
Index
21
File/Folder settings
MARK
File information (02 Information)
Jog dial
The selected file information is displayed.
Rotate the jog dial to select “02 Information”, and press
the jog dial.
File information is displayed.
STOP
File menu
Perform file management operations. You can check file information,
change file names, and delete, copy and move files.
nnDisplaying the File Menu (Preparation)
1
“File List” in the menu list and press the jog
2 Select
dial.
Press and hold DISPLAY for more than 1 second
while stopped.
PLAY/PAUSE
nnFile menu list
Display
Explanation
01 Play
Plays back a file.
02 Information
File information is displayed.
03 Rename
Changes the file name
04 Delete
Deletes a file.
05 Copy
Copies the file to a different folder.
06 Move
Moves a file from a the current folder into
a different folder.
07 Delete Mark
Deletes all marks from the selected file.
•Press the jog dial to return to the file menu.
•Press STOP to return to the stopped state.
Renaming files (03 Rename)
Renames the selected file name.
“03 Rename” in the folder list menu, and
1 Select
rotate the jog dial.
The rename menu is displayed.
The file list is displayed.
Playing back files (01 Play)
Plays back the selected file.
Rotate the jog dial to select “01 Play”, and press the jog
dial.
•Press PLAY/PAUSE while the file list is displayed to playback the
selected file.
•To display the folder list, select the folder name displayed at the
top, and press the jog dial.
the jog dial to select the file to operate, and
3 Rotate
press the jog dial.
The file menu is displayed.
•Press STOP when the file menu is displayed to return to the
stopped state.
22
•Press STOP to return to the file list.
2 Change the file name.
•The method for renaming the file is the same as “Renaming
presets” (vpage 13).
3 Press the jog dial to save the changes.
•To return to the previous screen without saving the changes, press
MARK.
•If a space is entered as the first or last character in the file name, the
space is deleted when the file name is saved.
•No more than 255 characters can be added for the file name.
Deleting files (04 Delete)
Moving files (06 Move)
Deletes the selected file.
Moves the selected file to a different folder.
•Select “Yes” with the jog dial to delete the file.
•Select “No” with the jog dial to return to the file menu.
•Press STOP to return to the stopped state.
2
“Delete?” is displayed.
Copies the selected file to a different folder.
•Press STOP to return to the stopped state.
The folder list is displayed.
Deleting marks (07 Delete Mark)
Deletes all of the marks written into the selected file.
Select “07 Delete Mark” in the folder list menu, and
rotate the jog dial.
“Delete Mark?” is displayed.
•Select “Yes” with the jog dial to delete the marks.
•Select “No” with the jog dial to return to the file menu.
•Press STOP to return to the stopped state.
the jog dial to select the folder to operate, and
3 Rotate
press the jog dial.
The folder menu is displayed.
USB mode and
the computer
The copy process starts. “Executing...” is displayed during the
copy process.
•Press STOP to return to the stopped state.
The file list is displayed.
Play
2
Rotate the jog dial to select the copy destination
folder, and press the jog dial.
The folder list is displayed.
The move process starts. “Executing...” is displayed during
the move process.
1 Select “File List” in the menu list.
the folder name at the top of the list and press
2 Select
the jog dial.
Recording
1
Select “05 Copy” in the folder list menu, and rotate
the jog dial.
Rotate the jog dial to select the folder that you want
to move, and press the jog dial.
Setting defaults
Copying files (05 Copy)
The folder list is displayed.
nnDisplaying the folder menu (Preparation)
Connections
“06 Move” in the folder list menu, and rotate
1 Select
the jog dial.
Part names
and functions
Select “04 Delete” in the folder list menu, and rotate the
jog dial.
Folder menu
Perform folder management operations. You can move the selected
folder to the current directory, rename folders, delete folders, and
create new folders.
Getting started
File menu
NOTE
Information
•Only folders right under the root directory in the media are
recognized. Files right under the root directory are not recognized.
•A maximum of 32 folders can be recognized. Other folders are not
recognized.
File/Folder
Control function
settings
•Press STOP when the folder list is displayed to return to the
stopped state.
Specifications
Index
23
Folder menu
MARK/LOCK
Jog dial
Renaming folders (3 Rename)
the jog dial to select “3 Rename”, and press
1 Rotate
the jog dial.
The rename menu is displayed.
2 Change the file name.
STOP
Creating folders (2 Make Folder)
nnFolder menu list
Display
Explanation
1 Select
Selects the folder to be recorded to or played.
2 Make Folder
Creates a new folder.
3 Rename
Changes the folder name
4 Delete
Deletes the folder.
Selecting folders (1 Select)
Select to create a recording file in this folder, or to playback the files
in this folder.
Rotate the jog dial to select “1 Select”, and press the jog
dial.
Displays the list of files in this folder.
Creates a new folder.
•The method for renaming the file is the same as “Renaming
presets” (vpage 13).
3 Press the jog dial to save the changes.
The display returns to the folder list.
•To return to the previous screen without saving the changes, press
MARK.
Rotate the jog dial to select “2 Make Folder”, and press
the jog dial.
A folder named “NewFolder” is added to the folder list.
•When a folder “NewFolder” already exists in the folder list, “Already
Exists” appears. Change the name of the folder “NewFolder” in the
folder list and create a new folder.
•A maximum of 32 folders can be created. If 32 folders already exist,
“Full Folder” is displayed for 1 second. Delete unnecessary folders
and then create a new folder.
•If a space is used as the last character of the folder name, the
renamed folder will not contain the space.
•No more than 255 characters can be added for the file name.
Deleting folders (4 Delete)
Deletes the folder.
Rotate the jog dial to select “4 Delete”, and press the jog
dial.
“Delete?” is displayed.
•Select “Yes” with the jog dial to delete the file.
•Select “No” with the jog dial to return to the folder menu.
•Press STOP to return to the stopped state.
When there is only one folder in a SD card, this folder cannot be
deleted. If you try to delete this folder, “Can not...” appears.
24
Getting started
Other functions
Locking operation buttons (Key lock)
Part names
and functions
When MARK/LOCK is pressed for more than 1 second, the key lock is
set and you will not be able to operate any button.
•If buttons are operated while the key lock is enabled, “Key Locked”
is displayed.
Connections
Setting defaults
When MARK/LOCK is pressed again for more than 1 second, the key
lock mode is canceled.
Recording
Play
USB mode and
the computer
File/Folder
Control function
settings
Information
Specifications
Index
25
Control function
REMOTE terminal 1
When an open/close type wired remote switch or another DN-F450R
is connected to the REMOTE (input) terminal 1 on DN-F450R, you can
perform the following operations.
nnManual track (ManualTrk)
Wired remote switch operations
nnCascade
When an open/close type wired remote switch such as a foot pedal
is connected to the REMOTE (input) terminal 1 on DN-F450R,
the following operation is performed according to the setting for
“Remote1” in the preset menu.
Wired Remote Control:
•Size : ø6
•Pin
: 2 pin
(Tip – Sleeve)
During recording or recording pause, a new file is created when the
wired remote switch is closed (short).
During recording or pause, recording starts when the wired remote
switch is closed (short).
Open→Closed
Start
Start
Add
mark
Create
new file
Start
Closed→Open
Pause
Pause at
the next
file
---
---
---
Example: Start pause
(Switch)
Open
During recording or recording pause, operation starts when the wired
remote switch is closed (short) whereas the operation is paused when
the switch is opened (open).
If the switch is closed (short) again after recording is paused, recording
will restart in a new file.
nnMark
During recording/playback or recording/playback pause, adds a mark
when the wired remote switch becomes short circuited (closed).
26
Open
Closed
nnStart pause (StartPaus)
nnStart pause track (StrtPseTr)
The cascade recording function automatically continues recording on
the second DN-F450R if the SD card set in the first DN-F450R runs out
of recording space during recording.
You can perform the cascade recording function by connecting
another DN-F450R to this DN-F450R via REMOTE (input) terminal 1.
Start pause
Manual
Start pause
Mark
Cascade
track
track
(Recording,
(Recording,
(Only when
(Only when
(Only when
playback)
playback)
recording)
recording)
recording)
SWITCH
During recording/playback or recording/playback pause, starts the
operation when the wired remote switch is short circuited (closed)
and pauses the operation when it is open.
Cascade recording
Stop
(Status)
Recording,
playback
a monaural audio cable to connect REMOTE
1 Use
terminal 1 of both DN-F450R recorders to each other.
“Remote1” preset menu to “Cascade” on both
2 Set
DN-F450R recorders.
•For the setting method, see “Remote1” (vpage 13).
Stop
to put both DN-F450R recorders
3 inPresspauseREC/M.TRACK
state.
Press REC/M.TRACK on the recorder with which you
4 want
to record.
Recording starts.
•When the SD card set in the first DN-F450R runs out of recording
space during recording, recording is continued automatically on the
second DN-F450R.
NOTE
•Unless you put the DN-F450R that is not recording in the recording
pause state, the cascade recording function will not be performed.
•If the SD card set in the second DN-F450R (that takes over recording)
is running low of recording space, the cascade recording function
will not be performed.
nnEnhancement for REMOTE terminal 2
nnPlug type (1/8” T-R-R-S Mini plug)
ø3.5/4P (TMP-B66)
1: Tip
2: Ring
3: Ring
4: Sleeve
1
2
3 4
Part names
and functions
If a remote device is incorporated into the circuit shown in the diagram
below, PLAY, FF (fast forward) and REW (rewind) switches can be
operated as remote control functions. Therefore, you can use this
feature to smoothly perform tasks for transcribing audio to letters and
text for dictations and tape transcriptions.
Getting started
REMOTE terminal 2
You can use the optional microphone remote RC600PMD with
DN-F450R. RC600PMD (sold separately) is a remote used by
attaching it to the microphone for interviewing purposes.
RC600PMD is equipped with a 1.5m cord and 4 terminal mini plugs.
Menu settings are not required to use the RC600PMD.
R1
1k
R3
6.8k
S2
S3
R4
11k
S4
R5
15k
R6
30k
S5
R7
220
R8
220
Setting defaults
S1
R2
3.9k
Connections
Circuit Diagram
S6
4
2
REC/M.TRACK button
1
REC PLAY REW
REC MARK
PAUSE
FF
Play
3
REC PAUSE button
Recording
Indicator
MARK button
File/Folder
Control function
settings
Information
a Indicator
•Lights green when in standby mode or when stopped
•Lights red during recording
•Flashes red during recording pause
•If a signal that exceeds the peak signal is input during recording
or recording pause, it returns from flashing orange to being lit red.
b Recording is paused when this button is pressed.
c Recording is started/restarted when this button is pressed. Files can
also be added manually. (Manual track)
d When this button is pressed, a mark is added during recording or
playback.
USB mode and
the computer
nnRC600PMD
•As long as the PLAY switch is closed, DN-F450R performs playback.
When the PLAY switch is opened, the track is skipped back and
DN-F450R is put in pause state. The amount of time used for skipping
back a track can be set using “Skip Back” preset menu (vpage 12).
While the FF switch or REW switch is closed, DN-F450R performs
the fast-forward or rewind operation accordingly and stops the
operation when the switch is opened.
•Electrical Resistance Measurement Error: Within 5%
•Do not add external voltage. Doing so may cause malfunctions.
•Insulate the circuit so that the circuit cannot be touched directly.
Static electricity causes malfunctions. Construct the circuit so that it
is protected from static.
•Do not operate the DN-F450R and circuit switch at the same time.
•DENON cannot accept any liability for damages or infringement of
patents or any other rights that occur from the use of this circuit.
•These contents do not constitute an approval of the use of DENON
or third party patents or other rights.
•The copying or reproduction of this circuit diagram in whole or in part
is strictly forbidden.
Specifications
Index
27
RS232C control
RS232C control
nnStructure of Control Commands
You will be able to perform the three control functions from the
host by connecting an RS-232C straight cable to the RS-232C serial
terminal (9-pin D-sub) connector.
Each packet of a control command begins with the Start Character
‘@’and ends with the End Character “0x0D” as shown below.
GThree control functionsH
qControlling and operating DN-F450R from the host (vpage 28)
Start
Character
ID
@
0
End
Character
COMMAND
q Controlling and operating DN-F450R from the host
When DN-F450R receives a control command from the host, the
unit sends an ACK (acknowledgement) command and executes the
command.
DN-F450R
Host
Control command
CR (0x0D)
wSending the status information to the host when DN-F450R
receives a status request command from the host (vpage 29)
eAutomatically sending the status information to the host
nnStructure of Command Codes
when there is a change to the DN-F450R status(vpage 29)
nnConnections
•Compatible Connector: 9-pin D-sub (male)
•Communication speed: 38,400 Bps
•Data Bit: 8 Bit
•Parity: None
•Stop Bit: 1 Bit
•Flow Control: None
Pin Arrangement
Pin Number
1
Ground
6
2
7
3
NC
8
’@’ (0 x 40)
ID
’0’ (0 x 30)
Command
Indicate a description of the command.
End character
’CR’(0 x 0D)
nnCommand Codes for ACK (Acknowledgement)
and NACK (No acknowledgement)
Description
Hex
value
0 x 06
NC
NACK
0 x 15
NC
Conditions for sending command
codes
--•When an End Character (0x0D) is
received without a Start Character ‘@’
•When an invalid command is received
•When the signal transmission is
stopped for 5msec or more between
the characters of a command.
NC
S. Ground
•When a command is received, DN-F450R responds either with an
ACK or NACK command within 100 msec.
•If DN-F450R does not respond with either command even after 100
msec have elapsed, the next command is accepted.
28
ACK
Handshake flow charts for control command
The response timeout is 100msec.
ACK
NC
9
Start character
TxD
RxD
4
5
Signal Name
Value (the hex value is indicated in
parentheses))
Item
When DN-F450R receives data other than the specified commands or
an End Character (0x0D) without a Start Character (‘@’), a reception
error occurs and the unit sends a NACK command.
For “Control command code table” (vpage 30).
w Sending the status information for a status request command from the host
When DN-F450R receives a status request command from the host, the unit responds with an ACK
command and the status information.
Host
DN-F450R status
When there is a change to the DN-F450R status, the recording or playback file is switched, or there is a
change to the SD card status or setting conditions, DN-F450R automatically sends the status information
to the host.
DN-F450R
Host
Connections
Status request command
Status command
The commands used for sending status information are the same as the status information commands
used for w.
For “Status request and status information code table”, see page vpage 35.
USB mode and
the computer
For “Status request and status information code table”, see vpage 35.
Handshake flow charts for status command
Play
When DN-F450R receives data other than the specified commands or an End Character (0x0D) without a
Start Character (‘@’), a reception error occurs and the unit ends a NACK command.
ACK
Recording
Handshake flow charts for status request command
Setting defaults
Status information command
Part names
and functions
DN-F450R
e Automatically sending the status information when there is a change to the
Getting started
RS232C control
File/Folder
Control function
settings
Information
Specifications
Index
29
RS232C control
nnControl command code table
Command
Key operations
DISPLAY
(Switch display)
@02311’\r’
Rec Volume +
@023V+’\r’
Rec Volume –
@023V-’\r’
MARK (Add mark)
@023121’\r’
Recording balance right
@023BR’\r’
Recording balance left
@023BL’\r’
File switching 9
@02332’\r’
File switching 8
@02333’\r’
Direct Jump
nnn
PAUSE (Pause)
Search (Fast forward)
Search (Fast rewind)
30
Code
Comment
Switches the contents of the display
@0TRnnn’\r’
nnn: File number (3 digits)
E.g.) When transferring to File No. 002: @0TR002’\r’
@02348’\r’
Switches to recording pause when a command is received in the stopped
state. Switches to playback pause during playback, and recording pause
during recording
ON
@02352’\r’
OFF
@0235201’\r’
ON
@02350’\r’
OFF
@0235001’\r’
PLAY (Play)
@02353’\r’
STOP (Stop)
@02354’\r’
REC (Recording)
@02355’\r’
Recording operation only (Manual track is a different command)
M.Track (Manual track)
@023MT’\r’
Divides the file at the position where the command is entered during
recording, and increases the file number by 1
MARK +
(Search mark in the +
direction)
@023M+’\r’
Select the forward mark
MARK –
(Search mark in the –
direction)
@023M-’\r’
Select the rear mark
Divide file
@023Dd’\r’
SKIP BACK (Skip back)
@023SB’\r’
Lock panel’s key
@023KL’\r’
Unlock panel’s key
@023KU’\r’
Command
File List
Code
Comment
File mark erase
xxx
@023MExxx’\r’
xxx: Number of the mark to be deleted.
* Disabled if there is no mark number to be deleted
@0MVnnnXXXXXXXXXXX’\r’
nnn: Number of file to be moved.
XXXX: Transfer destination folder name (max. 255 characters).
* Disabled if the file number to be moved is not saved.
Disabled if the transfer destination folder does not exist.
Disabled if a file with the same name already exists in the transfer destination.
@0CYnnnXXXXXXXXXXX’\r’
Number of file to be copied.
XXXX: Copy destination folder name (max. 255 characters).
* Disabled if the file number to be copied is not saved.
Disabled if the copy destination folder does not exist.
Disabled if a file with the same name already exists in the copy destination.
@0CNAL’\r’
Only enabled while a file is being copied or moved.
@0RNnnnXXXXXXXXXXXX’\r’
nnn: Number of the file to be renamed.
XXXX: new file name (Do not enter a file extension. Max 255 characters)
* File extensions cannot be changed.
Disabled for file numbers that do not exist.
Disabled if the Rename name already exists.
Move file
Copy file
nnn
nnn
XXXXXXXXXXX
XXXXXXXXXXX
Copy file fancel
Move file cancel
xxxxxxxxx
@0SFxxxxxxxxxxx’\r’
xxxx∙∙∙∙∙∙∙∙∙∙∙∙: Selected folder name
Make folder
xxxxxxxxx
@0MFxxxxxxxxxxx’\r’
xxx∙∙∙∙∙∙∙∙∙∙∙∙∙∙New folder name (Max 255 characters)
@0RFxxxxxxxxxxx:XXXXXXXXXXXX’\r’
xxxx∙∙∙∙∙∙∙∙∙∙∙∙Folder name to rename (Max 255 characters)
’:’∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙Separator
XXXX∙∙∙∙∙∙∙∙∙∙∙New folder name (Max 255 characters)
* Disabled when the folder name to be renamed to does not exist.
@0DRxxxxxxxxxxx’\r’
xxxx∙∙∙∙∙∙∙∙∙∙∙∙Name of the folder to be deleted (Max 255 characters)
*Disabled when the folder name to be deleted does not exist.
xxxxxxxxx
Delete folder
xxxxxxxxx
XXXXXXXXXXX
File/Folder
Control function
settings
Select folder
Rename folder
XXXXXXXXXXX
USB mode and
the computer
nnn
Play
Rename file
Recording
xxx: Number of the file to be deleted.
* Disabled if there is no file number to be deleted
Setting defaults
@023TExxx’\r’
Connections
xxx
Part names
and functions
File delete
Getting started
RS232C control
Information
Specifications
Index
31
RS232C control
Command
Preset menu
Code
Preset-1
@0PS01’\r’
Select Preset-1
Preset-2
@0PS02’\r’
Select Preset-2
Preset-3
@0PS03’\r’
Select Preset-3
@0PNn:xxxxxxxx’\r’
n: Preset number
xxxx∙∙∙∙∙∙∙∙∙∙∙∙: Set preset name
Preset rename
Input
n
xxxxxxxx
UNBAL
@0INUB’\r’
BAL
@0INBA’\r’
PCM
@0AFPMXX’\r’
XX: Bit length
16Bit =16
MP3
@0AFM3XXX’\r’
XXX: Bitrate
320kbps=320, 64kbps=064 etc
Setting type is the same as the menu selection
Record format
Rec channel
CH (Channel)
Sampling Frequency
Fs (Sampling
frequency)
Rec level control
Level LED
Auto track
Auto mark
STEREO
@0CHST’\r’
MONO
@0CHMO’\r’
XX
@0FSXX’\r’
Manual
@0RLMA’\r’
ALC
@0RLAL’\r’
Level
Time
XX
HHMM
XX: Sample rate
48kHz: xx=48, 44.10kHz: xx=44
Setting type is the same as the menu selection
@0LEXX’\r’
XX: Level (Indicate 2 digits without a minus sign)
-6dB: XX=06, -12dB: XX=12, etc
Setting type is the same as the menu selection
@0ATHHMM’\r’
HH: Hours, MM: Mins
Off=0000,
1min =0001,5min =0005
30min =0030,1hour =0100
Setting type is the same as the menu selection
Values other than the selection are disabled
ON
@0AM00’\r’
OFF
@0AM01’\r’
•For details on the description of command functions such as the preset menu, see “Menu list” (vpage 10).
32
Comment
Command
Preset menu
Silent skip
@0SS00’\r’
OFF
@0SS01’\r’
xxx
@0SBxxx’\r’
xxx: Skip back setting time
0.5sec: xxx=005, 60sec: xxx=600
Setting type is the same as the menu selection
Cont
@0PMOF’\r’
Single
@0PMSP’\r’
Random
@0PMRD’\r’
Next
@0FMNT’\r’
Recue
@0FMRC’\r’
ON
@0RE00’\r’
OFF
@0RE01’\r’
ON
@0POPL’\r’
OFF
@0POST’\r’
OFF
@0AC01’\r’
xx (dB)
@0ACxx’\r’
StartPause
@0RCSP’\r’
StartPauseTrack
@0RCST’\r’
Mark
@0RCMA’\r’
M.Track
@0RCMT’\r’
Cascade
@0RCCS’\r’
xxxxxxxxxxxx
@0MIxxxxxxxxxxxx’\r’
xxx∙∙∙∙∙∙∙∙∙∙∙∙∙∙: MachineID(0~8 characters)
@0DEFL’\r’
All selected presets are returned to the default values
Skip back (Time)
Power on play
Preset default
File/Folder
Control function
settings
Machine ID
xx : Off=01, -48dB=48, -42dB=42, -36dB=36
USB mode and
the computer
Remote1
Play
Auto cue
Recording
Repeat
Setting defaults
XX: Silent skip Level
-20dB xx=20, -25dB xx=25 etc
Setting type is the same as the menu selection
XX
Connections
@0SLXX’\r’
Level
Finish mode
Comment
Part names
and functions
ON
Silent level
Play mode
Code
Getting started
RS232C control
Information
Specifications
Index
33
RS232C control
Command
Display settings
Contrast
Time form
Date form
File sort
Language
Utility settings
34
Code
XX
@0BNXX’\r’
12H
@0TF12’\r’
24H
@0TF24’\r’
MDY
@0DFMD’\r’
DMY
@0DFDM’\r’
Alphabet
@0FRAL’\r’
Date/Time
@0FRDA’\r’
English
@0LNUS’\r’
Japanese
@0LNJP’\r’
Display menu default
@0DEDI’\r’
Load settings
@0PVLD’\r’
Save settings
@0PVSA’\r’
Media format
@023FOMAT’\r’
Comment
XX:01~10
nnStatus request and status information code table
When the DN-F450R receives a status request command from the host, it sends the status information to the host.
When there is a change to the DN-F450R status, the DN-F450R automatically sends the status information to the host.
Request.
Host)
Status infomation command (DN-F450R
Command
Answer
Status related
@0?CD ’\r’
Media
@0?ST’\r’
@0CDWP’\r’
STOP (Stop)
@0STST’\r’
PLAY STOP (Stops at the
@0STTS’\r’
head of the current file)
PLAY (During playback)
@0STPL’\r’
PLAYPAUSE (Playback
pause)
@0STPP’\r’
Auto cue
@0STAC’\r’
Search (Fast forward)
@0STFF’\r’
Search (Fast rewind)
@0STRW’\r’
REC (Recording)
@0STRE’\r’
Rec pause (During recording
@0STRP’\r’
pause)
Loading
@0STLD’\r’
File List
@0STFL’\r’
Busy
@0STBY’\r’
Error
@0?RV’\r’
During file copy etc.
Menu (Preset, Display, Utility
@0STED’\r’
etc.)
@0STER’\r’
Settings related
Rec volume setting
Searching auto cue
File/Folder
Control function
settings
Others
@0CDUF’\r’
Write protect
USB mode and
the computer
Recording system
@0CDCI’\r’
Unformat
Play
Status
@0CDNC’\r’
Card in
Recording
Play system
No card
Setting defaults
Stop
Comment
Command
Connections
Media
Host)
Part names
and functions
Statrus request command (DN-F450R
Rec volume (Recording
LLRR
volume level)
@0RVLLRR’\r’
Getting started
RS232C control
LL: Left Vol value
0dB: LL=00, Mute: LL=MU
RR: Right Vol value
-60dB: RR=60, Mute: RR=MU
Information
Specifications
Index
35
RS232C control
Statrus request command (DN-F450R
Request.
Host)
Status infomation command (DN-F450R
Command
Answer
Host)
Command
File List related
Elapse time
Remain time
Rec remain time
@0?ET’\r’
@0?RM’\r’
@0?RT’\r’
Elapse time
Remain time
Rec remain time
hhhmmss
hhhmmss
hhhmmss
Comment
@0EThhhmmss’\r’
hhh: Hours
mm: Minutes
ss: Seconds
•The display is hhhmmss=0000000 in the stopped
state when no file is selected or there is no SD card
mounted.
@0RMhhhmmss’\r’
hhh: Hours
mm: Minutes
ss: Seconds
•The display is hhhmmss=0000000 in the stopped
state when no file is selected or there is no SD card
mounted.
@0RThhhmmss’\r’
hhh: Hours
mm: Minutes
ss: Seconds
•The display is hhhmmss=0000000 when SD card is
mounted
Total file number
@0?TT’\r’
Total file number
XXX
@0TTXXX’\r’
XXX: Total number of files (000~999)
File number
@0?TR’\r’
File number
XXX
@0TRXXX’\r’
XXX: Current file number (000~999)
File name
(xxx: FileNo)
@0?Tnxxx’\r’
File name
XXXXXX
@0TnXXXXXX’\r’
XXXX∙∙∙∙∙∙∙∙∙∙∙: File Name (Max 255 characters, code is
ISO/IEC 8859-1)
* The display is @ 0Tn’\r’ when the file does not exist or
there is no SD card mounted.
File name is indicated as the full path
E.g.) \Folder1\File1.mp3
@0Tn\Folder1\File1.mp3’\r’
File size
(xxx: FileNo)
36
@0?Tsxxx’\r’
File size
XXXXXX
@0TsXXXXXX’\r’
XXX∙∙∙∙∙∙∙∙∙∙∙∙∙: File size(kByte)
10KB @0SZ10\r’ (Decimal scale)
*Display is XXXX=000 when there is no selected file or
when there is no mounted SD card.
1KB=1024Byte
Statrus request command (DN-F450R
Request.
Host)
Status infomation command (DN-F450R
Command
Host)
Answer
@0?ch’\r’
CH (Channel)
Algo (Recording
format)
@0rtYYYYMMDDhhmmss’\r’
STEREO
@0chST’\r’
MONO
@0chMO’\r’
PCM
@0afPMXX’\r’
XX: Bit length
16Bit =16
MP3
@0afM3XXX’\r’
XXX: Bitrate
320kbps=320, 64kbps=064 etc
Setting type is the same as the menu selection
Recording
@0?af’\r’
YYYYMMDDhhmmss
Setting defaults
Recorded time
Fs (Sampling
frequency)
XX
@0fsXX’\r’
XX: Sample Rate
48kHz=48, 44.10kHz=44 etc
Folder list
@0?FL’\r’
Folder name
AAAAA
BBBBB
CCCCC
@0FLAAAAA:BBBBB:CCCCC’\r’
AAA…, BBB…, CCC… are folder names.
Each folder name has a maximum of 255 characters
Selected folder
@0?SF'\r'
Folder name
0xxxxxxxx
@0SF0xxxxxxxx'\r'
xxxxxxxx: Selected folder name
Up to 255 characters are supported for folder names.
Preset-1
@0PS01’\r’
Preset
@0?PS’\r’
Preset
Preset-2
@0PS02’\r’
Preset-3
@0PS03’\r’
xxxxxxxx
@0PNnxxxxxxx’\r’
UNBAL
@0INUB’\r’
BAL
@0INBA’\r’
PCM
@0AFPMXX’\r’
XX: Bit length
16Bit=16
MP3
@0AFM3XXX’\r’
XX is
320kbps=320, 64kbps=064 etc
Setting type is the same as the menu selection
Preset name
Input
@0?IN’\r’
Input
@0?AF’\r’
Algo (Recording
format)
n: Preset No.
xxxx∙∙∙∙∙∙∙∙∙∙∙∙: Preset name to be set
Information
Rec format
File/Folder
Control function
settings
@0?PNx’\r’
USB mode and
the computer
Preset name
Play
@0?fs’\r’
Preset menu
Connections
Play track
File Properties
@0?rtxxx’\r’
YYYY: Year (2010=10)
MM: Month (January = 01)
DD: Date (1st = 01)
hh: Hour (24h display 0~23)
mm: Minutes
ss: Seconds
*Display is YYMMDDhhmmss=000000000000 when
there is no selected file or when there is no mounted
SD card.
Part names
and functions
File List related
Recorded time
(xxx: File No.)
Comment
Command
Getting started
RS232C control
Specifications
•For details on the description of command functions such as the preset menu, see “Menu list” (vpage 10).
Index
37
RS232C control
Statrus request command (DN-F450R
Request.
Preset menu
Status infomation command (DN-F450R
Command
Answer
Rec channel
@0?CH’\r’
CH (Channel)
Sample rate
@0?FS’\r’
FS (Recording format)
Rec level
@0?RL’\r’
Rec level
Level LED
@0?LE’\r’
Level
Auto track
@0?AT’\r’
A.Track time
(Auto track setting
time)
Automark
@0?AM’\r’
Automark
Host)
Comment
Command
STEREO
@0CHST’\r’
MONO
@0CHMO’\r’
XX
@0FSXX’\r’
Manual
@0RLMA’\r’
ALC
@0RLAL’\r’
XX
@0LEXX’\r’
HHMM
@0ATHHMM’\r’
ON
@0AM00’\r’
OFF
@0AM01’\r’
ON
@0SS00’\r’
OFF
@0SS01’\r’
XX is
48kHz=48, 44.10kHz=44 etc
Setting type is the same as the menu selection
HH: Hour
MM: Minutes
Off=0000,
1min =0001,5min =0005
30min =0030,1hour =0100
Setting type is the same as the menu selection
Silent skip
@0?SS’\r’
Silent skip
Silent skip level
@0?SL’\r’
Level
XX
@0SLXX’\r’
XX: Silent level
Off=01, -48dB=48, -42dB=42, -36dB=36
Skip back
@0?SB’\r’
Skip back
XXX(time)
@0SBXXX’\r’
xxx: Skip Back setting time
0.5sec: xxx=005, 60sec: xxx=600
Setting type is the same as the preset menu
Cont
@0PMOF’\r’
Play mode
@0?PM’\r’
Play mode
Single
@0PMSP’\r’
RANDOM
@0PMRD’\r’
Next
@0FMNT’\r’
Recue
@0FMRC’\r’
ON
@0RE00’\r’
OFF
@0RE01’\r’
ON
@0POPL’\r’
OFF
@0POST’\r’
OFF
@0AC01’\r’
XX(dB)
@0ACxx’\r’
Finish mode
Repeat mode
Power on play
Auto cue
38
Host)
@0?FM’\r’
@0?RE’\r’
@0?PO’\r’
@0?AC’\r’
Finish mode
Repeat mode
Power on Play
Auto cue
xx: Auto cue level
E.g.) -48dB: xx=48
Statrus request command (DN-F450R
Request.
Host)
Status infomation command (DN-F450R
Command
Answer
Remote1
Remote1
Mark
@0RCMA’\r’
M.Track
@0RCMT’\r’
StartPause
@0RCSP’\r’
StartPauseTrack
@0RCST’\r’
Cascade
@0RCCS’\r’
Comment
Machine ID
xxxxxx
@0MIxxxxxx’\r’
xxx∙∙∙∙∙∙∙∙∙∙∙∙∙∙: MachineID (0~8 characters)
Contrast
@0?BN’\r’
Contrast
XX
@0BNXX’\r’
XX: 01–10 (Contrast)
Values other than 01–10 are disabled
Time form
@0?TF’\r’
Time form
12H
@0TF12’\r’
24H
@0TF24’\r’
MDY
@0DFMD’\r’
DMY
@0DFDM’\r’
Alphabet
@0FRAL’\r’
Date/Time
@0FRDA’\r’
English
@0LNUS’\r’
Japanese
@0LNJP’\r’
xxxxxxxx
@0VNxxxxxxxxmmmmmmmmm’\r’
Dateform
@0?DF’\r’
Dateform
File sort
@0?FR’\r’
File older
Language
Version
@0?VN’\r’
Version
Others
xxxxxxxx: Version No (8 digits)
mmmmmm: Model Name
(for DN-F450R: DNF450R)
USB mode and
the computer
@0?LN’\r’
Play
Language
Recording
@0?MI’\r’
Setting defaults
Machine ID
Connections
Display menu
@0?RC’\r’
Command
Part names
and functions
Preset menu
Host)
Getting started
RS232C control
File/Folder
Control function
settings
Information
Specifications
Index
39
Information
Error messages
Details on procedure for handling error messages
Error message
Cause/Solution
Page
No Media
•Cannot detect a SD card. Set the SD card again.
9
Unformat
•A file is recorded using an unsupported format. Format a media on
DN-F450R or set the format to FAT16 or FAT32. For details, see
the operation instructions of the SD card.
15
•The remaining space on a SD card is running low. Replace the SD
card with a new one or delete files that are no longer required.
5, 23
•The maximum number of files (999 files) has been stored. Change
a folder to store the recording files or delete files that are no longer
required.
23, 24
Full MARK
•The maximum number of marks (30 marks) has been set, and a
new mark cannot be added. To add a mark, delete marks.
23
Full Folder
•The maximum number of folders (32 folders) has been created,
and a new folder cannot be created. To create a folder, delete other
folders.
24
No Files
•A target file is not found. Confirm whether the file exists.
22
No MARK
•A target mark is not found. To search for a mark, add a mark.
17
ALC
•This error message appears when “ALC” is set for “07 LevelCont”
in the preset menu. In that case, the recording level and recording
balance cannot be adjusted. To adjust the recording level, change
“07 LevelCont” to “Manual”.
16
•This error message appears when a VBR file search is performed.
Search cannot be performed on VBR files. The remaining time of a
file is not displayed either.
20
Full Media
Full 999
VBR
40
Cause/Solution
Page
Already Exists
Error message
•A file with the same file name already exists. Change the file name
and then press the jog dial to enter the data.
23
Long Title
•A file with a file name consisting of 253 characters cannot be
divided. Rename the file and then divide the file.
20
Key Locked
•Key lock is activated. To operate DN-F450R, cancel the lock.
25
Card Locked
•The SD card protection switch has been set to lock. To perform a
recording, cancel SD card protection.
9
Can not...
•This error message appears when an invalid operation is performed.
The operation may become invalid because of other setting items
such as the preset menu, so check the contents of the operation.
24
Err Format
•Format a media on DN-F450R or set the format to FAT16 or
FAT32. For details, see the operation instructions of the SD card.
15
Err Media X
•This SD card is not compatible with DN-F450R. Replace it with a
compatible SD card
–
Update File Error
•Error in upgrading a file or file system.
Contact your local Denon repair service center listed on our
website (URL: http://www.d-mpro.com).
–
Err FlashROM
•Error in flash ROM.
Contact your local Denon repair service center listed on our
website (URL: http://www.d-mpro.com).
–
Need Update
•Flash ROM download during the update was unsuccessful.
Contact your local Denon repair service center listed on our website
(URL: http://www.d-mpro.com).
–
GPlaybackH
Symptom
Symptom
Cause/Solution
Page
•The SD card could be the cause of this trouble. Replace the SD
card with another one and retry.
16
Although the music
•Make sure that the recording level (REC LEVEL) is not set to
has been recorded
MUTE.
properly, no sound is •Make sure that the recording settings (such as input source) and
reproduced when it is
all connections with external devices are correct.
played back.
(For example, make sure to set the audio input source for
recording to "Unbalance" and connect an external device to the
analog input (RCA) terminal. Otherwise, the unit will record the
music in silent mode.)
16
There are sound
•There may be minor sound cutoffs between files depending on
cutoffs between files.
the capacity of a recorded file.
12, 17
GRecordingH
Symptom
Cannot perform
recording.
7
•If an SD card is formatted on a computer, it may cause sound
cutoffs during recording. When you use an SD card with this unit,
make sure to format the card on this unit.
15
There is a loud noise
in the recorded file.
•Check the level meter and Level Over Display (LEVEL) to make
sure that the recording level does not exceed 0dB.
•Make sure that the electrical contacts of the cable connections
are not poor.
16
•Check the quality of the sound card and program of your computer.
•Check the frequency conversion program.
•This unit can record audio files using sampling frequencies of 48
kHz Some of the computer programs convert the frequency to 44.1
kHz (a sample rate converter is used). Use a higher quality sample
rate converter.
–
–
–
Cannot read the files •Check the functions of the computer program. Some playback
on a computer.
and editing programs may not support the recording format of this
unit.
If the operation of this unit is unstable, turn off the power and
disconnect the power cord. Then, restart the unit.
–
Poor sound quality
for playback on a
computer.
–
GOperationH
Symptom
Cause/Solution
Page
Cannot add a character •If the maximum number of characters has been already entered,
during renaming.
you cannot add any more characters. To add a character, delete
characters before adding.
13
Cannot delete a folder. •When there is only one folder on a SD card, you cannot delete
this folder.
24
File/Folder
Control function
settings
There are sound
cutoffs during
recording to an SD
card.
8
USB mode and
the computer
8
23
No sound is produced •Make sure that the headphone volume level adjustment switch
from the headphones.
(LEVEL) is not set to MIN.
•Check whether sound is reproduced from the headphones by
using another audio file or SD card.
Play
•Check whether the power cord is firmly connected to the AC
adaptor.
Does not turn on the
power.
–
23
Recording
Page
–
Setting defaults
Cause/Solution
Page
Connections
GGeneralH
Cause/Solution
•The SD card could be a cause of this trouble. Copy a file to another
SD card and retry playback.
•Check whether this unit supports the format of the playback file.
•Check if the target folder is located right under the root directory in
the SD card. Folders in other places are not recognized.
•Check whether the number of folders does not exceed 32. This
unit recognizes up to 32 folders.
Part names
and functions
Cannot perform
playback or does not
recognize a file.
Getting started
Troubleshooting
If a problem should arise, first check the following:
1. Are the connections correct?
2. Is the set being operated as described in the owner’s manual?
3. Are the external devices (mixer and player) operating properly?
If this unit does not operate properly, check the items listed in the table below.
If the symptom is not covered on the check list, contact your dealer or service centers.
Service centers are listed at http://www.d-mpro.com.
7
Information
Specifications
Index
41
Specifications
nn Input
•Balanced input
Type
Input sensitivity
(Recording level 0 dB (max))
Input impedance
•Unbalanced input
Type
Input sensitivity
Input impedance
XLR (1:GND, 2:Hot, 3:Cold)
+24 dBu,0 dBu
(0 dBFS Reference)
20 kΩ
RCA terminal
500 mVrms
22 kΩ
nn Output
•Unbalanced output
Type
Standard level
•Headphone out
RCA terminal
2 Vrms / Under 10 kΩ load
20 mW/32 Ω
•Maximum capacity of SD card
•Maximum file size
•Maximum number of files
•Maximum number of folders
•Maximum number of layers
(number of hierarchical levels)
•Maximum number of marks
•Maximum number of
characters for a file name
•Maximum number of
characters for a folder name
•Maximum number of
characters for preset names
•Maximum number of
characters for a machine ID
nn General
•Power supply
•Power consumption
•Environmental conditions
Operating temperature
Operating humidity
Storage temperature
Width
Height
Depth
Weight
nn Supplied accessories
•Owner’s manual
•AC adaptor
•AC adaptor cord holder
•Screw for fixing an AC adaptor
cord holder
•19-inch rack mount brackets
•Screws for attaching a 19-inch
rack mount brackets
•Audio cable
•USB cable
•CD-ROM
217.0 mm (8.5 )
8.0 mm (0.31 )
30 marks per file
255 characters
255 characters
8 characters
8 characters
DC 5 V
5W
0.3 W (Standby)
5 – 35 °C
25 – 85 %, No condensation
–20 – 60 °C
nn Dimensions (including protruding parts)
zz For the purpose of improvement, the specifications and design are subject to change without notice.
42
GDimensions (unit: mm)H
32GB
4GB
999 files per folder
32 folders
1 (Right under the root directory)
44.0 mm (1.7 )
MPEG1 Layer III audio
compression
WAV
16-bit linear PCM
•Recording MP3 bitrate (selectable)
MONO
160, 128, 96, 64, 32 kbps
STEREO
320, 256, 192, 128, 64 kbps
•Playable MP3 bitrate
MONO
160, 128, 96, 64, 32 kbps
STEREO
320, 256, 192, 128, 64 kbps
and VBR
•Sampling frequency
48, 44.1 kHz
•Number of channels
2 (STEREO)1 (MONO)
•Audio frequency characteristics 20 – 20,000 Hz ± 1.0 dB
•S/N ratio, IEC-A filter
96 dB(0dBFS
During playback at 1 kHz)
•Total harmonic distortion (at 0 0.02 %
VU (PCM))
(AES-17 20kHz filter)
•Dynamic range
96 dB
nn Others
10.0 mm (0.39 )
SOLID STATE
SD/SDHC card
270.0 mm (10.6 )
•System
•Compatible SD card
•Recording format
MP3
217 mm / 8.5”
52 mm / 2.0”
286 mm / 11.3”
1.8 kg
1
1
1
1
2
4
1
1
1
6.0 mm (0.24 )
nn Digital audio system
217.0 mm (8.5 )
vvA
vvB
vvC
vvS
USB mode and
the computer
Sample rate························································· 11
SD card·································································· 9
Search································································· 20
Search the marks················································ 20
Silent skip···························································· 12
File/Folder
Control function
settings
File divide···························································· 20
File list································································· 22
File menu···························································· 22
Firmware version················································ 15
Folder list····························································· 23
Folder menu························································ 23
Format································································· 15
Front panel···························································· 3
Rack mount··························································· 3
Random playback················································ 12
Rear panel····························································· 4
Recording time chart··········································· 18
Repeat playback·················································· 12
RS232C control··················································· 28
Play
vvF
vvR
Recording
vvD
Display··································································· 5
Peak-Hold value····················································· 6
Playback······························································ 19
Power off···························································· 11
Power on····························································· 11
Preset menu························································ 10
Setting defaults
Cables··································································· 7
Balanced cable···················································· 7
Stereo audio cable·············································· 7
USB cable··························································· 7
Connections·························································· 7
AC adaptor·························································· 8
Analog································································· 7
Computer···························································· 7
Remote terminal················································· 8
RS-232C terminal················································ 8
vvP
Connections
Bitrate·································································· 18
vvM
Machine ID·························································· 13
Manual track························································ 17
Marking······························································· 17
Menu list····························································· 10
Part names
and functions
Accessories··························································· 2
Auto cue······························································ 13
Getting started
Index
vvU
USB mode··························································· 21
USB port································································ 7
vvH
Headphone···························································· 8
Information
vvI
Indicator······························································ 27
Input source························································ 11
Specifications
vvJ
Jump to previous/next file··································· 20
vvK
Index
Key lock······························································· 25
vvL
Level meter··························································· 6
43
Download PDF