Mastercool 70092 45º FLARING, DOUBLE FLARING & CUTTING TOOL SET Instructions
Below you will find brief information for double-flaring tool. This document provides step-by-step instructions on how to use the double-flaring tool to create a 45° double flare on tubing. This tool allows you to create a strong, leak-proof connection and is suitable for use with copper, aluminum and steel tubing. The kit includes 5 adapters, allowing you to work with tubing of different sizes.
advertisement
◉
Touch to zoom
INSTRUCTIONS FOR USING THE DOUBLE-FLARING TOOL LINE UP TUBING EVEN WITH THICKNESS OF SHOULDER CHAMFER EE | y : GONE ADAPTER FLARING BAR FLARING 1. 2. Loosen the two wings nuts on the flaring bar. Squarely cut a piece of tubing and remove any burrs. Chamfer the outside edge with an ordinary file. REAM TUBING SO PROPER SIZED ADAPTER FITS FREELY INSIDE. DO NOT FORCE! REAM AGAIN IF NECESSARY. . Insert the tubing into the proper sized hole. The tubing should extend a distance equal to the width of the shoulder on the corresponding adapter. A set of five adapters is included: 1/2, 3/8, 5/16, 1/4 and 3/16". . Tighten the wing nut closest to the tube first, then tighten the other one. Nuts must be securely tightened so there is no chance of the tube slipping. . Place a drop of oil on the proper sized adapter and insert all the way into tubing. Slide the yoke over the bar and line up the flaring cone with the adapter. MAKE SURE THE ADAPTER IS STRAIGHT. Slightly turn the yoke clockwise to lock into place. Secure this locked position with thumb and forefinger. 6. Screw down one flaring cone until it engages with the adapter. MAKE SURE THAT THE ADAPTER IS CENTERED IN THE TUBING. If so, begin screwing down the cone until the shoulder of the adapter rests on the flaring bar. This completes the belling operation. 7. Now, back off the flaring cone slightly and remove the adapter. Screw the cone down tightly onto the tubing. This procedure folds the double flare. 70192-3 70192-2 70192-1 Up" 70192-5 70192-4 UU PARTS LIST tubing back on itself, forming a 45% 70351 70151 | 1/2 7/16 5/16 1/4 316 3/8 >> | Y Mastercool. "World Class Quality” 70092 INS LBL
advertisement
Key Features
- Creates a 45° double flare
- Suitable for copper, aluminum, and steel tubing
- Includes 5 adapters for different tubing sizes
- Easy-to-follow instructions
- Durable and reliable construction
Frequently Answers and Questions
What types of tubing can I use with this tool?
This tool can be used with copper, aluminum and steel tubing.
What sizes of tubing can I flare with this tool?
The tool comes with five adapters: 1/2, 3/8, 5/16, 1/4 and 3/16.
How do I ensure the adapter is centered in the tubing?
Make sure that the adapter is centered in the tubing before screwing down the cone until the shoulder of the adapter rests on the flaring bar.
Related manuals
Download
PDF
advertisement