HP | DL385 - ProLiant - G5 | HP ProLiant DL385 Generation 2

QuickSpecs
HP ProLiant DL385 Generation 2
Overview
Front View:
Rear View:
1.
Eight sockets for PC2-5300 DIMMs (DDR2-667) with
1.
T-10/T-15 Torx screwdriver
Advanced ECC
2.
External option blank
2.
Hot-plug fans, full redundancy
3.
NIC 2 connector
3.
Systems Insight Display
4.
NIC 1 connector
4.
Quick release lever for rapid server access
5.
Power supply bay 2
5.
Support for eight Small Form Factor hot plug hard drives 6.
Power cord connector
bays
7.
Power supply bay 1 (populated)
6.
Front LEDs (show server status) and Unit Identification 8.
Integrated Lights-Out 2 (iLO 2) connector
button/LED (for easy in rack server identification)
9.
Video connector
7.
Two front USB ports (+two rear, one internal USB port) 10. USB connectors (2)
8.
AMD Dual Core Rev. F Processor (Performance models 11. Serial connector
include two processors)
12. Mouse connector
9.
Hot plug power supply, redundancy option (High
13. Keyboard connector
performance models include redundant power supply) 14. Expansion slot 1
10. Three PCI-E non-hot plug expansion slots (or optional 15. Expansion slot 2
mixed PCI-X/E expansion cage or optional x16 PCI-E
16. Expansion slot 3
expansion cage). Two additional PCI-E slots embedded
on system board. This provides Four available PCI-E
17. Expansion slot 4
non-hot plug expansion slots for use; one consumed by
18. Expansion slot 5
Smart Array Controller
11. Quick removal access panel
What's New
New speed for Rev F: AMD Opteron Processor 2222 (3.0 GHz / 95 Watts)
At A Glance
The HP ProLiant DL385, the world's largest selling AMD server, delivers on its history of design excellence with enterpriseclass uptime and manageability, proven 2-way, dual core AMD Opteron performance, and 2U density for a variety of rack
deployments and applications.
Processors:
AMD Dual-core Rev F, 2000 series processors with 2MB Level 2 cache for blazing performance; systems
support up to 2 processors (2 processors standard on all Performance models)
Preconfigured Performance models save valuable deployment time at a discounted bundle price
Serverworks HT-2100 Northbridge and HT1000 Southbridge chipset
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 1
QuickSpecs
HP ProLiant DL385 Generation 2
Overview
Memory:
Up to 32 GB PC2-5300 DIMMs (DDR2-667). Standard models support 2:1 Interleaving. Bank Interleaving (Data
saved across 2 pairs of DIMMs) and Node interleaving supported (data saved across 2 processors memory
sets) also available.
Storage Controller:
Performance Models: Smart Array P400/512MB BBCW Controller (RAID 0/1/5/6)
Base Models: Smart Array P400/256MB Controller (RAID 0/1/5)
Upgrade to 512 MB cache w/o Battery Backed Cache module, optional BBWC
The Smart Array P400/256MB Controller ships installed in slot 1 (slots 2-5 are available)
Entry Model: Smart Array E200/64MB Controller (RAID 0/1)
Upgrade to 128 MB cache, adds Raid 5 and BBWC
The Smart Array E200/64MB Controllers ships installed in slot 3
Internal Drive Support:
(8) small form factor (SFF) hot-plug drive bays to support Serial-attached SCSI (SAS) and Serial ATA (SATA)
drives
Network Controller:
Two embedded NC373i Multifunction Gigabit Network Adapters with TCP/IP Offload Engine, including support
for Accelerated iSCSI through an optional Licensing Kit
Expansion Slots:
4 Total PCI-Express slots: three x8 and one x4.
Optional mixed 2 PCI-X / two x8 PCI-Express and Optional cage with PCI-Express with one x8, one x16 and
one x4 configurations available.
USB 2.0 Ports:
5 total ports: (2) ports up front; (2) ports in back; (1) port internal
Redundancy:
Fully redundant hot plug fans
Hot plug power supply with optional redundancy (Included in Performance models)
Management:
Integrated Lights-Out 2 featuring Integrated Remote Console with KVM over IP performance over shared
network access
Automatic Server Recovery (ASR), ROM Based Setup Utility (RBSU), HP System Insight Manager, Status LEDs
including system health and UID and SmartStart
System Insight Display on the front bezel for quick and easy server diagnostics
Form Factor:
Rack (2U), (3.5-inch)
Deployment/Serviceability:
Quick Deploy Rail System includes sliding universal rails, an ambidextrous cable management arm and quick
release levers for fast and easy serviceability
Tool-less access to all system components for easy in rack serviceability
Warranty:
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of
HP Authorized Channel Partners resellers. Hardware diagnostic support and repair is available for three years
from date of purchase. Support for software and initial setup is available for 90 days from date of purchase.
Enhancements to warranty services are available through HP Care Pack services or customized service
agreements. SATA hard drives have a one-year warranty.
NOTE: Server Warranty includes 3-Year Parts, 3-Year Labor, 3-Year Onsite support with next business day
response. Additional information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 2
QuickSpecs
HP ProLiant DL385 Generation 2
Standard Features
NOTE: For a brief, printer friendly data sheet that describes this product and informs you of the essential capabilities and
specifications, please visit: http://h71028.www7.hp.com/ERC/downloads/4AA0-8261ENW.pdf.
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information Factory Integrated Models" section.
Processor
AMD Opteron Processor 2222 (3.0 GHz / 95 Watts)
One of the following
NOTE: CTO only.
depending on Model
AMD Opteron Processor 2220 (2.8 GHz / 95 Watts)
AMD Opteron Processor 2218 (2.6 GHz, 95 Watts)
AMD Opteron Processor 2218 HE (2.6 GHz, 68 Watts)
NOTE: CTO only.
AMD Opteron Processor 2216 HE (2.4 GHz, 68 Watts)
AMD Opteron Processor 2216 (2.4 GHz, 95 watts)
NOTE: CTO only.
AMD Opteron Processor 2214 HE (2.2 GHz, 68 Watts)
AMD Opteron Processor 2212 HE (2.0 GHz, 68 Watts)
NOTE: CTO only.
AMD Opteron Processor 2210 HE (1.8 GHz, 68 Watts)
AMD Opteron Processor 2210 (1.8 GHz, 95 Watts)
NOTE: CTO only.
NOTE: Up to 2 processors supported. High Performance Model configurations include two
processors, Upgraded memory to 512, BBWC, DVD/CDRW and Redundant Power Supply.
Cache Memory
2MB (2 x 1MB) Level 2 cache (2000 series)
NOTE: 1MB Level 2 cache per core.
Chipset
Serverworks HT-2100 Northbridge and HT1000 Southbridge Chipset
Upgradeability
Upgradeable to 2 processors
Memory Protection
Advanced ECC
Memory
Type
Standard
(Entry Models)
Standard
(Base Models)
Standard
(Performance Models)
Maximum
PC2-5300 DIMMs (DDR2-667)
Standard models support 2:1 Interleaving, with Bank Interleaving (Data
saved across 2 pairs of DIMMs) and Node interleaving supported (data
saved across 2 processors memory sets) available.
NOTE: DIMM banks are active only when the corresponding processor
socket is populated.
1GB (2 x 512 MB)
2 GB (2 x 1 GB)
4 GB (4 x 1 GB)
32 GB (8 x 4 GB)
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 3
QuickSpecs
HP ProLiant DL385 Generation 2
Standard Features
Network Controller
Expansion Slots
Embedded Slots
PCIe Riser
Two embedded NC373i Multifunction Gigabit Network Adapters with TCP/IP Offload Engine,
including support for Accelerated iSCSI through an optional Licensing Kit
Slot
Bus Speed Bus Number**
Device
Hot Plug
PCI Voltage
Number
Number***
1
X8 PCIe
70
0
no
N/A
2
X8 PCIe
67
0
no
N/A
NOTE: For Base and Performance Models, the Smart Array P400/256MB Controller is installed in
Slot 1.
NOTE: For Entry Model, the Smart Array E200/64 MB Controller is installed in Slot 3.
** Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment
number.
*** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest
Device ID by bus (starting with the lowest bus).
Slot
Number
Bus Speed*
Bus Number**
Device
Number***
Hot Plug
PCI Voltage
3
x4 PCIe
11
0
no
N/A
4
x8 PCIe
8
0
no
N/A
5
x8 PCIe
5
0
no
N/A
* x4 slots support x8 cards, but will run at x4 speeds. x8 slots supports x16 cards, but will run at
x8 speeds.
** Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment
number.
*** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest
Device ID by bus (starting with the lowest bus).
PCIe/PCI-X Riser
(Optional)
Slot
Number
3
4
Bus Speed*
Bus Number**
Device
Number***
0
1
Hot Plug
PCI Voltage
x8 PCIe
10
no
N/A
64-bit/133MHz
6
no
3.3 Volt
PCI-X
5
64-bit/133MHz
6
2
no
3.3 Volt
PCI-X
* x8 slot supports x16 cards, but will run at x8 speed.
** Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment
number.
*** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest
Device ID by bus (starting with the lowest bus).
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 4
QuickSpecs
HP ProLiant DL385 Generation 2
Standard Features
PCIe/ x16 Riser
(Optional)
Slot
Bus Speed* Bus Number**
Device
Hot Plug
PCI Voltage
Number
Number***
3
x4 PCIe
8
0
no
N/A
4
x16 PCIe
5
0
no
3.3 Volt
* x4 slot support x8 cards, but will run at x4 speed.
** Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment
number.
*** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest
Device ID by bus (starting with the lowest bus).
Storage Controller
One of the following
depending on Model
Performance Models:
Base Models:
Entry Models:
Storage
Maximum Internal
Storage
HP Smart Array P400/512MB BBWC Controller (RAID 0/1/5/6)
HP Smart Array P400/256MB Controller (RAID 0/1/5)
Available upgrades: 512MB memory module for RAID 0/1/5/6, battery
for battery-backed write cache (BBWC).
HP Smart Array E200/64MB Controller (RAID 0/1)
Available upgrades: 128MB memory module for RAID 0/1/5, battery for
battery-backed write cache (BBWC).
Diskette Drive
Optical Drive
One of the following
depending on Model
Hard Drives
None Standard
None Standard
Hot Plug SAS
1.168TB
IDE DVD-ROM/CDRW Combo included on Performance models
None Standard
8 x 146GB with standard internal hot plug SFF
SAS drive cage
Remote Management Integrated Lights Out 2 (iLO2) Standard Management:
Virtual Text Remote Console (pre-OS only)
Remote Serial Console
Virtual Power Button Control
Virtual Unit ID control
Integrated Remote Console
Dedicated & full function shared network connectivity
Embedded system health
Browser, command line and scripted access
Automatic IP Configuration via DHCP/DNS/WINS
Industry Standard 128-bit Secure Sockets Layer (SSL) and Secure Shell security (SSH)
OS independent hardware health status
IML and iLO Event Logging
Support for 12 user accounts with customizable access privilege
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 5
QuickSpecs
HP ProLiant DL385 Generation 2
Standard Features
Intelligent
Manageability
HP Systems Insight Manager
SmartStart
Management Agent
Redundant ROM
Remote Flash ROM
ROM-Based Setup Utility (RBSU)
Integrated Management Log
Automatic Server Recovery (ASR)
Dynamic Sector Repairing (with Smart Array controller)
Drive Parameter Tracking (with Smart Array controller)
NOTE: Upon the event of a failed processor in a multi-processing environment, the system will
automatically reboot and attempt to use the remaining good processor.
Pre-Failure Warranty (covers processors, SAS hard drives and memory)
Interfaces
Serial
1
Pointing Device (Mouse) 1
Graphics
1
Keyboard
VGA
Network RJ-45
iLO 2 remote
management port
USB 2.0 Ports
Graphics
1
2 (1 front, 1 back)
2
1
5 (2 front, 2 back, 1 inside)
NOTE: Please see the following URL for additional information
regarding USB support:
http://h18004.www1.hp.com/products/servers/platforms/usbsupport.html.
Integrated ATI ES1000, 32MB video standard
16 bit color: maximum resolution of 1600 x 1200
32 bit color: maximum resolution of 1280 x 1024
NOTE: Maximum resolution available via iLO 2 remote console is 1280x1024.
Form Factor
Rack (2U), (3.5-inch)
ProLiant Essentials
Foundation Pack
Software
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 6
QuickSpecs
HP ProLiant DL385 Generation 2
Standard Features
ProLiant Essentials
Foundation Pack
Software
HP Systems Insight
Manager
HP Systems Insight Manager (HP SIM) provides a unified, secure and
extensible environment to centrally manage servers, storage and other
infrastructure devices across multiple operating system platforms.
Through a single management view, HP SIM provides core
management services that include device discovery and identification,
event views, health monitoring, inventory data collection, software
version control and reporting. HP SIM is built on industry standards and
is extensible with value-added ProLiant Essentials, Integrity Essentials
and Storage Essentials software to meet individual management needs.
For more details on HP SIM visit http://www.hp.com/go/hpsim.
HP SIM provides organizations with the following benefits:
Simplifies and consolidates infrastructure lifecycle management
using task and query based functionality
Provides the foundation for infrastructure automation and
virtualization
Enables IT management based on business processes not
hardware platforms
Lowers infrastructure maintenance cost and frees resources for
innovation
Maximizes resource utilization with virtualization technologies
Provides a central point of integration between infrastructure and
Enterprise management tools such as HP OpenView
SmartStart
SmartStart simplifies server setup by providing a quick, easy way to
deploy reliable and consistent server configurations. For more
information, please visit the SmartStart Web site at
http://www.hp.com/servers/manage.
SmartStart version supported (minimum): SmartStart 7.51
Insight Management
Agents
Insight Management Agents should be installed on all HP servers to
present system instrumentation, health and configuration information
into HP Systems Insight Manager and the HP System Management
Homepage. The HP System Management Homepage aggregates
systems data from Insight Management Agents and other HP
management tools, providing a consolidated browser-based interface
for managing individual servers,
Subscriber's Choice
ROMPaq, support
software, and
configuration utilities
Insight Management Agents and The HP System Management
Homepage are included on ProLiant Support Packs, and can also be
installed using the server profiles provided with the ProLiant Essentials
Rapid Deployment Pack. For additional information about the
Management Agents and the HP System Management Homepage
please visit the management Web site at
http://www.hp.com/servers/manage
Subscriber's Choice Driver and Support Alerts/Notifications is a webbased email subscription service that provides automatic delivery of
software and driver change notifications for ProLiant products. Sign up
at http://www.hp.com/go/subscriberschoice
and customize your profile to receive alerts on updates as they become
available.
The latest software, drivers, and firmware fully optimized and tested for
your ProLiant server and options
Available in SmartStart or downloadable from the Software and Drivers
download pages at http://www.hp.com/go/support.
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 7
QuickSpecs
HP ProLiant DL385 Generation 2
Standard Features
Insight Diagnostics
The most advanced configuration analysis, reporting and
troubleshooting utilities used by HP and at your fingertips, available in
SmartStart.
Optional ProLiant
Optional software offerings that extend the functionality of an Adaptive
Essentials Value Packs Infrastructure to address specific business problems and needs:
Optional Remote
Management Packs
Insight Control Environment - is based on HP Systems Insight
Manager and ProLiant Essentials software, and brings the value
of Insight Control to ProLiant customers by delivering
comprehensive health and performance monitoring, remote
control, vulnerability scanning and patch management as well as
flexible deployment and power management through an
integrated installation package and streamlined licensing. For
more information, visit: http://www.hp.com/go/ice
Accelerated iSCSI Pack - enables the embedded Multifunction
network controller to serve as both a NIC and an iSCSI HBA
providing access to SAN storage over the same connection used
for networking. Processing of the protocol stack is offloaded to the
NIC reducing CPU utilization and greatly improving the speed with
which the requests are processed and sent to the network.
Rapid Deployment Pack (RDP) is an automated deployment and
provisioning solution for all ProLiant servers. RDP includes the
ProLiant Integration Module featuring ProLiant server preconfigured events for OS installation, and optimized software
drivers, firmware and management agents. Every RDP disc
includes 7-day, 10-node trial licenses for evaluation purposes.
RDP requires a license for each server deployed and is available
for purchase with HP servers. For more information, visit:
http://www.hp.com/servers/rdp.
Server Migration Pack - The Server Migration Pack automates
the manual processes required for migrating servers between
physical or virtual platforms (P2V, V2P, and V2V).
Server Migration Pack - P2P Edition: Upgrading or replacing
your existing server? Effortlessly transition to new servers with
automated, accurate and affordable migration of OS, application
and data.
Performance Management Pack (offered exclusively through the
Insight Control suites) - a performance management solution that
identifies and explains hardware performance bottlenecks on
ProLiant servers and attached options enabling users to better
utilize their valuable resources.
Virtual Machine Management Pack - provides central
management and control of virtual machines from Microsoft and
VMware. Integrated approach provides the ability to manage both
physical and virtual resources from a single management
console.
Vulnerability and Patch Management Pack (offered exclusively
through the Insight Control suites) - identifies and remediates
software security vulnerabilities due to missing patches as well
operating system configurations that can be exploited by viruses,
worms, and other blended threats.
Integrated Lights-Out Advanced Pack - upgrades the iLO 2
processor with comprehensive remote control including Virtual
KVM remote graphical console, enhanced console sharing and
replay, virtual media (floppy, CD/DVD, USB key), virtual folders,
historical power reporting, power capping and enterprise security
(directory services and two-factor authentication).
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 8
QuickSpecs
HP ProLiant DL385 Generation 2
Standard Features
Integrated Lights-Out Select Pack - upgrades the iLO 2
processor with enhanced console sharing and replay, virtual
media (floppy, CD/DVD, USB key), virtual folders, historical power
reporting, power capping and enterprise security (directory
services and two-factor authentication) for servers managed using
remote consoles available in iLO 2 Standard and iLO 2 Standard
Blade Edition.
Insight Power Manager (IPM) - upgrades the single-server
remote management capabilities of iLO Select/Advanced to
include centralized reporting and policy-based management of
power consumption and thermal output provided by the Insight
Power Manager. IPM unifies all of this functionality within a single
user interface - HP Systems Insight Manager
NOTE: Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs.
Refer to http://www.hp.com/servers/proliantessentials or the various ProLiant Essentials Value
Pack product QuickSpecs for more information.
NOTE: For more information regarding ProLiant Essentials Software, please see the following
URL: http://www.hp.com/servers/proliantessentials.
Industry Standard
Compliance
ACPI 2.0 Compliant
PCI 2.2 Compliant
WOL Support
Microsoft® Logo certifications
USB 2.0 Support
Security
Power-on password
Keyboard password
Diskette drive control
Diskette boot control
QuickLock, Network Server Mode
Parallel and serial interface control
Administrator's password
Server Power Cords
One Highline IEC Power cord ships standard (6')
NOTE: ProLiant DL servers no longer ship standard with NEMA power cords (187335-001) that
allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily
connected to PDU's in data center racks so they now ship standard with only a PDU power cord
(416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle (NEMA15), the NEMA power cord (187335-001) must be ordered separately.
UPS and PDU Power
Cord Matrix
Please see the UPS and PDU cable matrix that lists cable descriptions, requirements, and
specifications for UPS and PDU units:
ftp://ftp.compaq.com/pub/products/servers/ProLiantstorage/power-protection/powercordmatrix.pdf.
Power Supply
800 Watt, CE Mark Compliant
Optional Hot Plug AC Redundant Power Supply
System Fans
Hot plug fans ship standard, fully redundant
Fully redundant hot plug fans ship standard (N+1)
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 9
QuickSpecs
HP ProLiant DL385 Generation 2
Standard Features
Required Cabling
For required cabling information, refer to the Web site at:
http://h10010.www1.hp.com/wwpc/us/en/ss/WF05a/15351-241434-241475-241475-f793219233.html
OS Support
Microsoft Windows Server 2003
Novell NetWare
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
SCO UnixWare, OpenServer
VMware Virtualization Software
Solaris 10 32/64-bit
NOTE: For more complete and up-to-date information on how to buy server operating systems
from HP please visit the OS product site at:
http://h18004.www1.hp.com/products/servers/software/OEM.html.
NOTE: For a more complete and up-to-date listing of supported OSs and versions, please visit our
OS Support Matrix at: http://www.hp.com/go/supportos.
NOTE: For an up-to-date listing of the latest drivers available for the HP ProLiant DL385 G2,
please see: http://h18023.www1.hp.com/support/files/server/us/index.html.
NOTE: For more Linux OS support & certification information, please visit our the ProLiant &
BladeSystem Server Linux matrix:
http://h18004.www1.hp.com/products/servers/linux/hpLinuxcert.html
NOTE: For more information on HP's Certified and Supported ProLiant Servers, please visit the
VMware Server Support Matrix at:
http://h18004.www1.hp.com/products/servers/software/vmware/hpvmwarecert.html.
Rack Airflow
Requirements
Rack 10000 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for
maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you
must allow 830 square inches (5,350 sq cm) of holes evenly distributed from top to bottom
to permit adequate airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack
must be a minimum of 2.75 inches (7 cm).
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack.
This arrangement ensures proper airflow. Using a rack without blanking panels results in improper
cooling that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation
CD provided with the server, or to the server documentation located in the Support section at the
following URL: http://h18000.www1.hp.com/products/servers/proliantdl385/index.html.
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 10
QuickSpecs
HP ProLiant DL385 Generation 2
Standard Features
Rack Kit
The HP ProLiant DL385 quick deploy rail system provides tool-free support for racks with square
or round mounting holes (including Compaq/HP 7000*, 9000, 10000 and HP series), with an
adjustment range of 24" - 36". The ambidextrous cable management arm can be mounted on
either the left or right side for improved cable management.
NOTE: Cable management arm must be removed to access hot-plug power supplies when the
cable management arm is mounted on the right.
*NOTE: High Airflow Inserts (High Air Flow Rack Door Insert for the 7142 Rack (single) - PN:
327281-B21; or High Air Flow Rack Door Insert for the 7142 Rack (6-pack) - PN: 327281-B22) are
required to support the HP ProLiant DL385 G2 in 7000 series racks. The DL385 G2 Cable
Management Arm is not supported on 7000 series racks.
Telco Rack Support
DL385 G2 Telco Rack Kit:
Support for all 2-post Telco racks requires the use of the standard rack kit and an additional option
kit from Rack Solutions (http://www.racksolutions.com/hp/)
Factory Express
Portfolio for Servers
and Storage
HP Factory Express offers configuration, customization, integration and deployment services for
HP servers and storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading,
asset tagging, and custom packaging. HP products supported through Factory Express include a
wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP
BladeSystem, HP 9000 servers as well as the MSA1000, VA7xxx, EVA, XP, rackable tape
libraries and configurable network switches.
For more information on Factory Express services for your specific server model please contact
your sales representative or go to http://www.hp.com/go/factory-express.
HP Enterprise
Configurator
The HP eCo-Enterprise Configurator now provides factory default racking for our HP hardware
portfolio. This approach is aligned with our strategic direction to meet the needs and expectations
of our valued customers. If you require "custom" rack configuration, please contact HP's Customer
Business Center or an Authorized Partner for assistance.
http://www.hp.com/products/configurator.
HP ProLiant Smart
Buys (NA only)
The HP Smart Buy program offers mainstream business solutions at competitive prices with
excellent availability and superior HP quality. It offers a wide range of industry-leading HP
products at compelling prices, allowing you to receive richer configurations with additional options.
NOTE: ProLiant Smart Buys are available in North America only. For detailed specification
information on ProLiant Smart Buys please click on the following link:
ftp://ftp.compaq.com/pub/products/servers/smartbuys.pdf
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 11
QuickSpecs
HP ProLiant DL385 Generation 2
Standard Features
Service and Support
HP Care Pack services provide total care and support expertise with committed response
designed to meet your IT and business needs.
HP Care Pack services include coverage for the HP branded hardware options qualified for the
server and purchased at the same time or afterward that are internal to the enclosure. This also
includes the 22" and smaller external monitors and tower UPS options up to 3kVA. These items
will be covered at the same service level and for the same coverage period as the server.
Coverage of UPS Battery is not included, and standard warranty terms & conditions apply. For
servers or storage systems installed within a rack, service also covers all HP qualified rack
options installed within the same rack.
To fully capitalizing on your HP ProLiant servers' capabilities requires a service partner who
thoroughly understands your server technology and systems environment. HP Services, an
industry leader in provision of multi vender support solutions, provides a range of support services
designed to meet the varying needs of your business. Whether an SMB, or large global
corporation, HP has a ProLiant server support offer to help you speedily deploy and maximize
system uptime.
Recommended Service - simplify ProLiant solution implementation, maintenance, and
management.
Support: 3-Year 4-Hour response 24x7 Same Business Day Coverage only
Deployment Service: Installation and Start up only
Enhanced Service - optimize service level to increase IT performance and availability.
Support: 3-Year Support Plus 24 only
Refer to the information on "Installation & Start-Up" for service on ProLiant server and Microsoft or
Linux O/S per the Customer Description and/or Data Sheet; to be delivered on a scheduled basis
8am-5pm, M-F, excluding HP holidays.
NOTE: For a complete listing of service offerings and information visit:
http://www.hp.com/services/proliantservices
http://www.hp.com/go/proliant/carepack
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 12
QuickSpecs
HP ProLiant DL385 Generation 2
HPC Interconnects
NOTE: High Performance Computing (HPC) interconnect technologies are available for the DL385 under the Cluster
Platform product portfolio. These high-speed interconnects are fully supported by HP when they are part of these configure
to order clusters. Solutions can be defined with a lot of flexibility with the help of configuration tools. Please visit the following
URL to configure HPC Clusters with InfiniBand, Gigabit Ethernet or Myrinet Interconnects:
http://www.hp.com/techservers/clusters/ucp/index.html
HPC Interconnect
InfiniBand
Gigabit Ethernet
Myrinet XP
PCI-X and PCI-Express adapters
Use embedded ports
PCI-X Rev D and Rev E adapters
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 13
QuickSpecs
HP ProLiant DL385 Generation 2
Models
NOTE: ProLiant Smart Buys are available in NA only. For detailed specification information on ProLiant Smart Buys please
click on the following link: ftp://ftp.compaq.com/pub/products/servers/smartbuys.pdf.
HP DL385 G2
Processor(s)
(2) Dual-Core AMD Opteron 2218 Processors (2.6 GHz, 95 Watts)
Performance Models One of the following
(2) Dual-Core AMD Opteron 2220 Processors (2.8 GHz, 95 Watts)
depending on Model
HP DL385G2 2218 4G Cache Memory
2MB (1 x 2MB) Level 2 cache - 2000 Series
HPM
Memory
4 GB (4 x 1 GB of 2:1 interleaved PC2-5300 DIMMs (DDR2-667) with
432195-xx1
Advanced ECC capabilities
HP DL385G2 2220 4G Network Controller
Two Embedded NC373i Multifunction Gigabit Server Adapters
HPM
Storage Controller
HP Smart Array P400/512MB BBWC Controller (RAID 0/1/5/6)
438816-xx1
Hard Drive
None ship standard
Internal Storage
1.168TB max - 8 x 146GB SAS drives (with optional hard drives)
Optical Drive
IDE DVD-ROM/CDRW combo
Form Factor
Rack (2U), (3.5-inch)
Availability
Hot Plug Fully Redundant Fans and Redundant Power Supplies
HP DL385 G2 Base
Models
HP DL385G2 2218 2G
407424-xx1
HP DL385G2 2216 2G
408838-xx1
HP DL385G2 2214 2G
407429-xx1
HP DL385G2 2220 2G
438815-xx1
HP DL385 G2 Entry
Models
HP DL385G2 2210 1G
434940-xx1
Processor(s)
One of the following
depending on Model
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Form Factor
Availability
Processor(s)
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Optical Drive
Form Factor
Availability
(1) Dual-Core AMD Opteron 2218 Processor (2.6 GHz, 95 Watts)
(1) Dual-Core AMD Opteron 2216 HE Processor (2.4 GHz, 68 Watts)
(1) Dual-Core AMD Opteron 2214 HE Processor (2.2 GHz, 68 Watts)
(1) Dual-Core AMD Opteron 2220 Processor (2.8 GHz, 95 watts)
2MB (2 x 1MB) Level 2 cache - 2000 Series
2 GB (2 x 1 GB) PC2-5300 DIMMs (DDR2-667) with Advanced ECC
capabilities
Two Embedded NC373i Multifunction Gigabit Server Adapters
HP Smart Array P400/256MB Controller (RAID 0/1/5)
None ship standard
1.168TB max - 8 x 146GB SAS drives (with optional hard drives)
Optional DVD, DVD/CD-RW combo, DVD+R/RW or floppy drive
Rack (2U), (3.5-inch)
Hot Plug Fully Redundant Fans Standard
(1) Dual Core AMD Opteron 2210 HE Processor (1.8 GHz, 68 Watts)
2MB (2 x 1MB) Level 2 cache - 2000 Series
1 GB (2 x 512 MB) PC2-5300 DIMMs (DDR2-667) with Advanced ECC
capabilities
Two Embedded NC373i Multifunction Gigabit Server Adapters
HP Smart Array E200/64MB Controller (RAID 0/1)
None ship standard
1.168TB max - 8 x 146GB SAS drives (with optional hard drives)
Optional DVD, DVD/CD-RW combo, DVD+R/RW or floppy drive
Rack (2U), (3.5-inch)
Hot Plug Fully Redundant Fans Standard
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 14
QuickSpecs
HP ProLiant DL385 Generation 2
Models
Country Code Key
XX=00
XX=20
XX=29
XX=37
XX=42
XX=AA
U.S.
Brazil
Japan
APD
Euro
PRC
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 15
QuickSpecs
HP ProLiant DL385 Generation 2
Configuration Information - Factory Integrated Models (North America only)
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for additional information.
NOTE: For Configure to Order requirements within EMEA region, please consult local Sales Contact.
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE: This product offering does not support HP Factory Express Server Configuration Level 1.
NOTE: FIO indicates that this option is only available as a Factory Installable Option.
Step 1: Base Configuration (choose one of the following configurable models)
Models
HP ProLiant DL385G2 Rack CTO Chassis
Factory Integrated Model ships with:
(8) SFF Serial Attached SCSI (SAS) Drive Bays
Two Embedded NC373i Multifunction Gigabit Server Adapters
PCI-Express Riser Cage
800 Watt hot plug power supply, CE Mark Compliant
One IEC Power cord
Hot plug fans (fully redundant)
Rack (2U), (3.5-inch)
414109-B21
Step 1A: Choose SAS Controller (must choose only one of the following)
SAS Controllers
HP Smart Array P400/256 for DL380 G5/ DL385 G2 FIO Controller
NOTE: PCI Express
HP Smart Array P400/512 BBWC for DL380 G5/ DL385 G2 FIO Controller
NOTE: PCI Express
HP Smart Array E200/128 BBWC Controller
NOTE: PCI Express
HP Smart Array P600/256 BBWC Controller
NOTE: PCI-X. SA-P600 Controller supports both internal and external drives.
HP Smart Array P800/512 BBWC Controller
NOTE: PCI Express
HP Smart Array P800/512 BBWC Controller
NOTE: PCI Express
HP Smart Array E200/64 FIO Controller
HP Smart Array 6402/512 FIO Controller
HP Smart Array 6404/512 FIO CNTRLR
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
405160-B21
405162-B21
411508-B21
337972-B21
381513-B21
381513-B21
405528-B21
441508-B21
452240-B21
Page 16
QuickSpecs
HP ProLiant DL385 Generation 2
Configuration Information - Factory Integrated Models (North America only)
Step 2: Choose Required Options (only one of the following from each list unless
otherwise noted)
Processors
Base Memory
AMD Opteron Processor 2222 (3.0 GHz, 95 Watts) FIO
AMD Opteron Processor 2220 (2.8 GHz, 95 Watts) FIO
AMD Opteron Processor 2218 (2.6 GHz, 95 Watts) FIO
AMD Opteron Processor 2218 HE (2.6 GHz, 68 Watts) FIO
AMD Opteron Processor 2216 (2.4 GHz, 95 Watts) FIO
AMD Opteron Processor 2216 HE (2.4 GHz, 68 Watts) FIO
AMD Opteron Processor 2214 HE (2.2 GHz, 68 Watts) FIO
AMD Opteron Processor 2212 HE (2.0 GHz, 68 Watts) FIO
AMD Opteron Processor 2210 HE (1.8 GHz, 68 Watts) FIO
AMD Opteron Processor 2210 (1.8 GHz, 95 Watts) FIO
NOTE: DIMM banks are active only when the corresponding processor socket is
populated.
1 GB PC2-5300 DDR2 2 x 512 MB Kit
2 GB PC2-5300 DDR2 2 x 1 GB Kit
451649-L21
438825-L21
407433-L21
438824-L21
434945-L21
408840-L21
407435-L21
408837-L21
434943-L21
434947-L21
408850-B21
408851-B21
4 GB PC2-5300 DDR2 2 x 2 GB Kit
8 GB REG PC2-5300 (2 x 4GB) dual rank
408853-B21
408854-B21
Step 3: Choose Additional Factory Integratable Options
Performance Packs
The HP ProLiant DL385 G2 performance packs are necessary to configure a HP
ProLiant DL385 G2 Performance Model. HP ProLiant DL385 G2 Performance
model includes the latest performance technologies and enterprise class
availability features pre-installed for convenience and value. The performance
pack includes a 2nd processor and a redundant power supply. To complete the
configuration of a Performance model, select the Slimline CD-RW/DVD-ROM
Combo Option Kit (331903-B21).
HP DL385G2 2220 HPM FIO Perf Pack
HP DL385G2 2218 HPM FIO Perf Pack
442239-B21
432858-B21
Step 4: Choose Additional Options for Factory Integration
NOTE: For additional options, please refer to the "Options" section below.
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 17
QuickSpecs
HP ProLiant DL385 Generation 2
Options
NOTE: Some options may not be factory integratable. Contact your local sales representative for additional information.
HP ProLiant DL385 G2 HP 2 Slot PCI-Express x16 & x4 Riser DL385G2 ALL
410571-B21
Unique Options
HP PCI-X/PCI-E NHP RISER DL385G2 ALL
410570-B21
ProLiant Essentials
Offerings
ProLiant Essentials Value Pack
Accelerated iSCSI Pack
ProLiant Essentials Accelerated iSCSI Pack, No Media, Single License
NOTE: For use with a single NIC port. Contains one license with a unique
license activation key and documentation.
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12466_div/12466_div.HTML
Insight Control Environment
HP Insight Control Environment, No Media 1-Server License including 1 year of
24x7 Technical Support and Updates
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12631_div/12631_div.HTML
ProLiant Essential RDMA Pack
HP ProLiant Essentials RDMA Pack for Embedded Multifunction Gigabit Server
Adapters, No Media, 1-Server License
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12573_div/12573_div.HTML
Rapid Deployment Pack
ProLiant Essentials Rapid Deployment Pack No Media 1-Server License
including 1 year of 24x7 Technical Support and Updates
NOTE: This license allows 1 server to be deployed and managed via RDP.
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11053_div/11053_div.HTML
Server Migration Pack
ProLiant Essentials Server Migration Pack, No Media, 1-Migration License,
including 1 year of 24x7 Technical Support and Updates
NOTE: This license allows 1 P2V, V2P, or V2V migration. Contains one license
with a unique license activation key and documentation
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12328_div/12328_div.HTML
Server Migration Pack - P2P
ProLiant Essentials Server Migration Pack - P2P Edition, 1- Migration License, License Only, No Media
NOTE: This license allows 1 migration. Contains one license with a unique
license activation key and documentation
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12467_div/12467_div.HTML
Virtual Machine Management Pack
ProLiant Essentials Virtual Machine Management Pack, No Media, 1-Server
License, including 1 year of 24x7 Technical Support and Updates
NOTE: For use with a single server. Contains one license with a unique license
activation key and documentation.
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/12328_div/12328_div.HTML
Remote Management
Integrated Lights-Out Advanced Pack
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
452679-B21
452148-B21
452681-B21
452151-B21
435663-B21
417435-B21
452153-B21
Page 18
QuickSpecs
HP ProLiant DL385 Generation 2
Options
Integrated Lights-Out Advanced Pack, No Media ,1 Server License
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/10861_div/10861_div.HTML
Integrated Lights-Out Select Pack
Integrated Lights-Out Select Pack, No Media, 1 Server License
NOTE: For additional License Kits, please see the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/10861_div/10861_div.HTML
NOTE: Flexible and volume quantity license kits are available for ProLiant
Essentials Value Packs. Refer to http://www.hp.com/servers/proliantessentials or
the various ProLiant Essentials Value Pack product QuickSpecs for more
information.
NOTE: For more information regarding ProLiant Essentials Software, please see
the following URL: http://www.hp.com/servers/proliantessentials.
452141-B21
ProLiant Software
Maintenance
Subscription
ProLiant Software Maintenance Single Release
NOTE: Please see the SmartStart QuickSpecs for additional information
regarding the subscription purchase:
http://h18000.www1.hp.com/products/quickspecs/Division/11073.html
(Worldwide)
356573-B21
Processors
AMD Opteron Processor 2222 (3.0 GHz, 95 Watts)
AMD Opteron Processor 2220 (2.8 GHz, 95 Watts)
AMD Opteron Processor 2218 (2.6 GHz, 95 Watts)
AMD Opteron Processor 2218 HE (2.6 GHz, 68 Watts)
AMD Opteron Processor 2216 (2.4 GHz, 95 Watts)
AMD Opteron Processor 2216 HE (2.4 GHz, 68 Watts)
AMD Opteron Processor 2214 HE (2.2 GHz, 68 Watts)
AMD Opteron Processor 2212 HE (2.0 GHz, 68 Watts)
AMD Opteron Processor 2210 (1.8 GHz, 95 Watts)
AMD Opteron Processor 2210 HE (1.8 GHz, 68 Watts)
451649-B21
438825-B21
407433-B21
438824-B21
434945-B21
408840-B21
407435-B21
408837-B21
434947-B21
434943-B21
Memory
1 GB PC2-5300 DDR2 2 x 512 MB Kit
2 GB PC2-5300 DDR2 2 x 1 GB Kit
4 GB PC2-5300 DDR2 2 x 2 GB Kit
8 GB REG PC2-5300 (2 x 4GB) dual rank
408850-B21
408851-B21
408853-B21
408854-B21
Optical Drives
Slimline CD-RW/DVD-ROM Combo Option Kit
NOTE: Included in performance models.
Slimline DVD-ROM Drive (8x/24x) Option Kit
HP DVD+R/RW 8X Slim
Slimline CD-ROM Drive 24X
331903-B21
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
452158-B21
264007-B21
383975-B21
356963-B21
Page 19
QuickSpecs
HP ProLiant DL385 Generation 2
Options
Hard Drives
Hot Plug SFF SAS 2.5" Drives
HP 36GB 3G SAS 10K SFF SP HDD
HP 36GB 3G SAS 15K SFF SP HDD
HP 36GB 3G SAS 15K SFF DP HDD
HP 72GB 3G SAS 10K SFF SP HDD
HP 72GB 3G SAS 10K SFF DP HDD
HP 72GB 3G SAS 15K SFF SP HDD
HP 72GB 3G SAS 15K SFF DP HDD
HP 146GB 3G SAS 10K SFF SP HDD
HP 146GB 3G SAS 10K SFF DP HDD
NOTE: Please see the SAS Hard Drive QuickSpecs for Technical Specifications
such as capacity, height, width, interface, transfer rate, seek time, physical
configuration, and operating temperature:
http://h18000.www1.hp.com/products/quickspecs/12244_div/12244_div.HTML
(Worldwide)
SFF SATA Hot Plug
HP 120GB 1.5G SATA 5.4K SFF HDD
HP 60GB 1.5G SATA 5.4K SFF HDD
NOTE: SATA drives have a 1 year warranty. Please see the SATA Hard Drive
QuickSpecs for Technical Specifications such as capacity, height, width,
interface, transfer rate, seek time, physical configuration, and operating
temperature:
http://h18000.www1.hp.com/products/quickspecs/11940_div/11940_div.HTML
(Worldwide)
Storage Controllers
SAS Controllers
Smart Array E200 Controller
HP Smart Array E200/128 BBWC Controller
128-MB BBWC (Battery-Backed Write Cache) Enabler
NOTE: Supports the Smart Array E200 Controller, Smart Array 641 Controller,
and Smart Array 642 Controller.
Smart Array P400 Controller
HP Smart Array P400/256MB Controller
HP Smart Array P400/512MB BBWC Controller
512MB Battery-backed cache upgrade
NOTE: For Smart Array P400 Controller.
Battery-backed write cache upgrade
NOTE: For Smart Array P400 Controller.
Smart Array P400 Battery Attach Kit
NOTE: This option kit contains a 24" battery cable and adhesive material for
installing a battery into the server if a Smart Array P400 is integrated outside of
the factory. For all solutions, please refer to the server QuickSpecs and User's
Manual for detailed installation instructions.
Smart Array P600 Controller
HP Smart Array P600/256 BBWC Controller
NOTE: Requires Mixed PCI-E/X riser cage.
512 MB Battery-Backed Cache Upgrade
NOTE: This 512-MB Battery-Backed Cache Module upgrade kit supports the
Smart Array P600 Controller and the Smart Array 6400 series Controller.
Smart Array P800 Controller
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
375859-B21
431933-B21
418369-B21
375861-B21
384842-B21
431935-B21
418371-B21
431958-B21
418367-B21
431786-B21
379306-B21
411508-B21
351580-B21
405132-B21
411064-B21
405148-B21
383280-B21
417836-B21
337972-B21
372538-B21
Page 20
QuickSpecs
HP ProLiant DL385 Generation 2
Options
HP Smart Array P800/512 BBWC Controller
NOTE: Please see the following Controller QuickSpecs for Technical
Specifications such as PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols
supported, SCSI Peak Data Transfer Rate, Channels, SCSI Ports, Drives
supported, Cache, RAID support, and additional information:
http://h18000.www1.hp.com/products/quickspecs/12460_div/12460_div.HTML
(Smart Array E200 Controller)
http://h18000.www1.hp.com/products/quickspecs/12400_div/12400_div.HTML
(Smart Array P400 Controller)
http://h18000.www1.hp.com/products/quickspecs/12247_div/12247_div.HTML
(Smart Array P600 Controller)
http://h18000.www1.hp.com/products/quickspecs/12616_div/12616_div.HTML
(Smart Array P800 Controller)
SAS HBA
HP SC44Ge Host Bus Adapter
HP 8 Internal Port SAS HBA with RAID
NOTE: Please see the following QuickSpecs for additional information:
http://h18004.www1.hp.com/products/quickspecs/12617_div/12617_div.html
(SC44Ge HBA)
http://h18004.www1.hp.com/products/quickspecs/12332_div/12332_div.html
(SAS HBA)
SCSI Controllers for External Drive/Storage Support
NOTE: All Ultra 320 controllers are PCI-X and require the Mixed Riser Cage
Option Kit (PCI-E/PCI-X).
Smart Array 6402/128 Controller
NOTE: Ultra320 SCSI.
Smart Array 6404/256 Controller
NOTE: Ultra320 SCSI.
Smart Array 642 Controller
NOTE: Ultra320 SCSI.
128-MB Battery-Backed Write Cache (BBWC)
NOTE: Supports the Smart Array E200 Controller, Smart Array 641 Controller,
and Smart Array 642 Controller.
Ultra320 Expansion Module for SA-6402
64-Bit/133-MHz Single Channel Ultra320 SCSI HBA G2
SCSI HBA
HP SC11Xe Host Bus Adapter
NOTE: Please see the following QuickSpecs for Technical Specifications and
additional information:
http://h18000.www1.hp.com/products/quickspecs/11943_div/11943_div.HTML
(Single Channel Ultra320 SCSI HBA)
http://h18000.www1.hp.com/products/quickspecs/11587_div/11587_div.HTML
(Smart Array 6400 Series)
http://h18000.www1.hp.com/products/quickspecs/12069_div/12069_div.HTML
(Smart Array 642)
http://h18000.www1.hp.com/products/quickspecs/12566_div/12566_div.HTML
(SC11Xe HBA)
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
381513-B21
416096-B21
347786-B21
273915-B21
273914-B21
291967-B21
351580-B21
273911-B21
374654-B21
412911-B21
Page 21
QuickSpecs
HP ProLiant DL385 Generation 2
Options
Communications
HP NC110T PCI Express Gigabit Server Adapter
NOTE: Does not support Windows 2000.
HP NC150T PCI 4-port Gigabit 1000T Combo Switch Adapter
HP NC360T PCI Express Dual Port Gigabit Server Adapter
HP NC364T PCI Express Quad Port Gigabit Server Adapter
NOTE: Does not support Windows 2000.
HP NC373F PCI Express Multifunction Gigabit Server Adapter
HP NC373T PCI Express Multifunction Gigabit Server Adapter
HP NC380T PCI Express Dual Port Multifunction Gigabit Server Adapter
HP NC510F PCIe 10 Gigabit Server Adapter
NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each
NC510F adapter.
HP NC510C PCIe 10 Gigabit Server Adapter
NOTE: A minimum of 1 gigabyte (1 GB) of server memory is required per each
NC510C adapter.
HP NC7771 PCI-X 1000T Gigabit Server Adapter
HP IB 4X SDR PCI-e single PORT HCA
434905-B21
HP IB 4X DDR PCI-e Single PORT HCA
HP IB 4X DDR PCI-e SINGLE PORT HCA
431039-B21
448398-B21
Redundant Options
Redundant Power Supply 350/370/380 G5 AU Kit
Redundant Power Supply 350/370/380 G5 EU Kit
Redundant Power Supply 350/370/380 G5 JP Kit
Redundant Power Supply 350/370/380 G5 Worldwide Kit
Redundant Power Supply 350/370/380 G5 UK Kit
Redundant Power Supply 350/370/380 G5 US Kit
Redundant Power Supply 380 G5 Worldwide Kit - 48Volt DC
399771-011
399771-021
399771-291
399771-B21
399771-031
399771-001
433634-B21
Tape Drives
NOTE: For the complete listing of Tape Drive offerings, please see:
http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
For recommended tape drive offerings for this ProLiant server see the following:
USB Tape Drives
HP StorageWorks 1U USB Rack-Mount Kit with one DAT 72 USB Tape Drive
HP StorageWorks 1U USB Rack-Mount Kit with one DAT 160 USB Tape Drive
SAS Tape Drives
NOTE: For the DL385 G2, HP recommends purchasing the HP SC44Ge HBA
(416096-B21) for a dedicated SAS HBA for tape.
NOTE: For a complete list of suitable SAS cables for connecting SAS tape
drives to this server, please see the "Cables and Adapters" section of the HP
Ultrium Half-Height Tape Drives QuickSpecs located at:
http://h18006.www1.hp.com/products/quickspecs/12128_div/12128_div.html
HP StorageWorks LTO-2 Ultrium 448 SAS Internal Tape Drive
NOTE: HP recommends combining this tape drive with the 1U SAS Rack-Mount
kit (AE459A) for a complete rack-mount solution.
HP StorageWorks LTO-3 Ultrium 920 SAS Internal Tape Drive
NOTE: HP recommends combining this tape drive with the 1U SAS Rack-Mount
kit (AE459A) for a complete rack-mount solution.
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
367132-B21
412648-B21
435508-B21
394793-B21
394791-B21
394795-B21
414126-B21
414129-B21
290563-B21
431038-B21
AG594A
AG703A
DW085A
EH847A
Page 22
QuickSpecs
HP ProLiant DL385 Generation 2
Options
NOTE: Please refer to the "Tape Drives, Tape Autoloaders & Tape Libraries"
table in the Storage section of this document for a list of SAS controllers with
tape support.
Ultrium Tape Drives
HP StorageWorks LTO-1 Ultrium 232 Internal Tape Drive (Carbonite)
NOTE: HP recommends combining this tape drive with the 1U SCSI Rack-Mount
kit (A7445B) for a complete rack-mount solution.
HP StorageWorks 1U SCSI Rack-mount kit with one LTO-2 Ultrium 448 SCSI
Tape Drive (Carbonite)
HP StorageWorks 1U SCSI Rack-mount kit with one LTO-3 Ultrium 920
NOTE: Please see the HP StorageWorks Ultrium Tape Drive QuickSpecs for
additional options such as controllers, media, and other related items:
http://h18006.www1.hp.com/products/quickspecs/11739_div/11739_div.html
(Worldwide)
http://h18006.www1.hp.com/products/quickspecs/12128_div/12128_div.html
(Worldwide)
For an up-to-date listing of the latest O/S and software support details for HP
Ultrium tape drives, please visit: http://www.hp.com/go/connect.
SCSI DAT Drives
HP StorageWorks DAT 160 SCSI External Tape Drive
NOTE: HP recommends combining this tape drive with the 1U SCSI Rack-Mount
kit (A7445B) for a complete rack-mount solution.
NOTE: Please see the DAT Tape Drive QuickSpecs for controllers, media, and
other options:
http://h18000.www1.hp.com/products/quickspecs/11883_div/11883_div.HTML
(Worldwide)
For an up-to-date listing of the latest O/S and software support details for HP
DAT drives, please visit: http://www.hp.com/go/connect
Rack-Mount Tape Drive Enclosures
HP StorageWorks 1U SCSI Rack-Mount kit
NOTE: The 1U Rack-Mount Kit can support up to (2) half-height tape drives and
is compatible with multiple Single-Ended and LVD SCSI tape drives including the
DAT 40, DAT 72, DAT 160, DLT VS160, LTO-1 Ultrium 232, LTO-2 Ultrium 448
and LTO-3 Ultrium 920 tape drives.
HP StorageWorks 1U USB Rack-Mount Kit
NOTE: The 1U USB Rack-Mount Kit can support up to (2) half-height tape drives
and is compatible with the DAT 40 USB, DAT 72 USB and DAT 160 USB tape
drives.
HP StorageWorks 1U SAS Rack-Mount Kit
NOTE: The 1U SAS Rack-Mount Kit can support up to (2) half-height tape drives
and is compatible with the LTO-2 Ultrium 448 SAS and LTO-3 Ultrium 920 SAS
tape drives.
NOTE: Please see the Rack-Mount Tape Drive Kits QuickSpecs for additional
information regarding these kits:
http://h18000.www1.hp.com/products/quickspecs/10854_div/10854_div.HTML
(Worldwide)
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
DW064A
DW028B
EH903A
Q1574A
A7445B
A8007A
AE459A
Page 23
QuickSpecs
HP ProLiant DL385 Generation 2
Options
HP D2D Backup
System
Tape Autoloaders
HP StorageWorks D2D110 Backup System
NOTE: 1TB of Disk Storage.
HP StorageWorks D2D110 Backup System with Data Protector Express
Software Kit
NOTE: 1TB of Disk Storage.
HP StorageWorks D2D120 Backup System
NOTE: 2TB of Disk Storage.
HP StorageWorks D2D120 Backup System with Data Protector Express
Software Kit
NOTE: 2TB of Disk Storage.
NOTE: Please see the HP D2D Backup Systems QuickSpecs for additional
information:
http://h18000.www1.hp.com/products/quickspecs/12651_div/12651_div.HTML
(Worldwide)
HP StorageWorks DAT Autoloader
HP StorageWorks DAT 72x10 tape autoloader
HP StorageWorks 1/8 Tape Autoloader
HP StorageWorks 1/8 G2 LTO-3 Ultrium 920 Tape Autoloader
HP StorageWorks 1/8 G2 LTO-2 Ultrium 448 Tape Autoloader
HP StorageWorks 1/8 G2 LTO-1 Ultrium 232 Tape Autoloader
HP StorageWorks 1/8 G2 Tape Autoloader Rack Kit
NOTE: Required to install the 1/8 G2 Autoloaders in a standard 19-inch rack;
includes rails and rackmount instructions
NOTE: Please reference the Tape Autoloader QuickSpecs at
http://www.hp.com/go/automation for additional information needed to create a
complete solution.
Tape Libraries
HP StorageWorks MSL2024 Tape Library
HP StorageWorks MSL2024 1 LTO-3 Ultrium 960 SCSI Drive Library
HP StorageWorks MSL2024 1 LTO-3 Ultrium 960 4GB FC Library
HP StorageWorks MSL2024 1 LTO-3 Ultrium 920 SAS Drive Library
HP StorageWorks MSL2024 1 LTO-3 Ultrium 920 SCSI Drive Library
HP StorageWorks MSL2024 2 LTO-3 Ultrium 920 SCSI Drive Library
HP StorageWorks MSL2024 1 LTO-2 Ultrium 448 SCSI Drive Library
HP StorageWorks MSL2024 2 LTO-2 Ultrium 448 SCSI Drive Library
HP StorageWorks MSL4048 Tape Library
HP StorageWorks MSL4048 1 LTO-2 Ultrium 448 SCSI Drive Library
HP StorageWorks MSL4048 2 LTO-2 Ultrium 448 SCSI Drive Library
HP StorageWorks MSL4048 1 LTO-3 Ultrium 920 SAS Drive Library
HP StorageWorks MSL4048 1 LTO-3 Ultrium 920 SCSI Tape Library
HP StorageWorks MSL4048 2 LTO-3 Ultrium 920 SCSI Tape Library
HP StorageWorks MSL4048 1 LTO-3 Ultrium 960 SCSI Drive Library
HP StorageWorks MSL4048 1 LTO-3 Ultrium 960 4GB FC Library
HP StorageWorks MSL4048 2 LTO-3 Ultrium 960 SCSI Drive Library
HP StorageWorks MSL4048 2 LTO-3 Ultrium 960 4GB FC Library
HP StorageWorks MSL8096 Tape Library
HP StorageWorks MSL8096 2 LTO-3 Ultrium 920 SAS Drive Library
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
EH880A
EH923A
EH884A
EH924A
AE313B
AF204A
AH165A
AH164A
AH163A
AH166A
AG115A
AG326B
AH559A
AH169A
AH170A
AG116A
AG117A
AG320A
AG321A
AH560A
AH171A
AH172A
AG322A
AG324B
AG323A
AG325B
AH561A
Page 24
QuickSpecs
HP ProLiant DL385 Generation 2
Options
Cluster Options
HP StorageWorks MSL8096 2 LTO-3 Ultrium 960 4GB FC Library
HP StorageWorks MSL8096 2 LTO-3 Ultrium 960 SCSI Drive Library
HP StorageWorks MSL6000 Tape Library
Ultrium 960 technology
HP StorageWorks MSL6030 1 LTO-3 Ultrium 960 SCSI Drive Library
HP StorageWorks MSL6030 1 LTO-3 Ultrium 960 4GB FC Library
HP StorageWorks MSL6030 2 LTO-3 Ultrium 960 SCSI Drive Library
HP StorageWorks MSL6030 2 LTO-3 Ultrium 960 4GB FC Library
NOTE: Please reference the MSL2024, MSL4048 and MSL6000 Tape Library
QuickSpecs at http://www.hp.com/go/automation for additional information
needed to create a complete solution; reference current compatibility information
at http://www.hp.com/go/ebs
AH218A
AH219A
ProLiant Cluster Starter Kit
NOTE: For additional information regarding the ProLiant Cluster Starter Kit
please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11935_div/11935_div.html
(Worldwide)
HP HA/F200 for Entry SAN Cluster
NOTE: For additional information regarding the ProLiant Cluster for Entry Level
SAN please see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11932_div/11932_div.html
(Worldwide)
NOTE: For configuration/certification options for the HP Parallel Database
Cluster for Oracle RAC please go to:
http://www.hp.com/solutions/highavailability/oracle
HP Serviceguard for Linux ProLiant Cluster A.11.16 for SUSE SLES 9 & 10 and
Red Hat EL 3 & 4 (2 node license cluster kit)
HP Serviceguard for Linux, A.11.18 (single license version - Red Hat EL 4&5,
SUSE SLES 9&10)
HP Serviceguard for Linux A.11.16 for SUSE SLES 9 & 10 and Red Hat EL 3 &
4 (single license version)
HP Serviceguard for Linux ProLiant Cluster, A.11.18 (2 license version - Red Hat
EL 4&5, SUSE SLES 9&10)
HP Serviceguard for Linux and Red Hat Global File System - 1 year subscription
HP Serviceguard for Linux and Red Hat Global File System - 3 years
subscription
NOTE: For additional information regarding HP Serviceguard for Linux, please
see the following QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/11518_div/11518_div.html
(Worldwide)
NOTE: For configuration/certification options for HP Serviceguard for Linux
please go to: http://www.hp.com/info/sglx
364023-B22
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
AD606B
AD608B
AD607B
AD609B
364026-B22
305199-B26
305199-B27
307754-B26
307754-B27
T2798AA#001
T2798AA#003
Page 25
QuickSpecs
HP ProLiant DL385 Generation 2
Options
StorageWorks Options StorageWorks Fibre Channel HBA
NOTE: For the complete listing of Fibre Channel Host Bus Adapters for Windows
2000, Windows Server 2003 and Linux, please see:
http://h18006.www1.hp.com/storage/saninfrastructure/hba.html
HP StorageWorks FC2142SR 4Gb PCI-e HBA
HP StorageWorks FC1142SR 4Gb PCI-e HBA
HP StorageWorks FC2143 4Gb PCI-X 2.0 -to-Fibre Channel HBA
HP StorageWorks FC2243 Dual Channel 4Gb PCI-X 2.0 HBA
HP StorageWorks FC1143 4Gb PCI-X 2.0 HBA
HP StorageWorks FC1243 Dual Channel 4Gb PCI-X 2.0 HBA
StorageWorks SCSI HBA
HP U320e SCSI Host Bus Adapter
NOTE: Recommended Dual Channel Ultra320 SCSI Controller for connecting
multi-drive MSL tape libraries to ProLiant servers.
HP StorageWorks
HP StorageWorks Modular Smart Array 50 Enclosure
Modular Smart Array 50NOTE: Please see the Modular Smart Array 50 QuickSpecs for additional
A8002A
AE311A
AD167A
AD168A
AB429A
AE369A
AH627A
364430-B21
information including configuration steps and additional options needed for a
complete solution at:
http://h18000.www1.hp.com/products/quickspecs/12245_div/12245_div.HTML
(Worldwide)
HP StorageWorks
HP StorageWorks 60 Modular Smart Array Enclosure
Modular Smart Array 60NOTE: Please see the Modular Smart Array 60 QuickSpecs for additional
information including configuration steps and additional options needed for a
complete solution at:
http://h18000.www1.hp.com/products/quickspecs/12627_div/12627_div.HTML
(Worldwide)
418408-B21
HP StorageWorks
HP StorageWorks 70 Modular Smart Array Enclosure
Modular Smart Array 70NOTE: Please see the Modular Smart Array 70 QuickSpecs for additional
information including configuration steps and additional options needed for a
complete solution at:
http://h18000.www1.hp.com/products/quickspecs/12652_div/12652_div.html
(Worldwide)
418800-B21
HP StorageWorks
Modular Smart Array
500 G2
335880-B21
HP StorageWorks Modular Smart Array 500 Generation 2
NOTE: Please see the Modular Smart Array 500 Generation 2 QuickSpecs for
additional information including configuration steps and additional options
needed for a complete solution at:
http://h18000.www1.hp.com/products/quickspecs/11956_div/11956_div.HTML
(Worldwide)
Uninterruptible Power HP R1.5 VA 1U UPS INTL
Systems - Rack
HP R1.5 VA 1U UPS JPN
HP R1.5 VA 1U UPS NA
HP R/T2200 2-U ERM
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
AF418A
AF421A
AF419A
AF412A
Page 26
QuickSpecs
HP ProLiant DL385 Generation 2
Options
USB Options
HP USB 2-Button Optical Scroll Mouse (Carbonite/Silver)
USB 1.44-MB External Diskette Drive (Carbonite)
HP USB 04 Standard Keyboard
HP 1GB USB 2.0 Floppy Drive Key
HP 256MB USB 2.0 Floppy Drive Key
Third Party Rack
Adapter Kit (for wide
racks)
Rack Adapter Kit
NOTE: Not required for most racks. This kit allows HP rack servers to fit in racks
that are 24" wide.
HP Rack 5000 Series
(Graphite Metallic)
HP 5642 Rack-Unassembled
358254-B21
NOTE: Please see the HP Rack 5642 QuickSpecs for additional part numbers and Technical
Specifications such as height, width, depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/12074_div/12074_div.HTML
(Worldwide)
NOTE: For additional information regarding Rack Cabinets, please see the following URL:
http://www.hp.com/go/rackandpower.
HP Rack 10000 G2
Series
(Carbon/Graphite
Metallic)
10642 G2 (42U) Rack Cabinet - Pallet
10642 G2 (42U) Rack Cabinet - Shock Pallet
10642 G2 (42U) Rack Cabinet - Crated
10642 G2 (42U) Rack Cabinet, with Extension - Shock Pallet
10636 G2 (36U) Rack Cabinet - Pallet
10636 G2 (36U) Rack Cabinet - Shock Pallet
10636 G2 (36U) Rack Cabinet - Crated
10636 G2 (36U) Rack Cabinet, with Extension - Shock Pallet
10622 G2 (22U) Rack Cabinet - Pallet
10622 G2 (22U) Rack Cabinet - Shock Pallet
10842 G2 (42U) 800mm Wide Rack Cabinet - Pallet
10842 G2 (42U) 800mm Wide Rack Cabinet - Shock Pallet
10647 G2 (47U) Rack Cabinet - Pallet
NOTE: It is mandatory to use a shock pallet when shipping racks with equipment
installed.
NOTE: Please see the Rack 10000 G2 QuickSpecs for Technical Specifications
such as height, width, depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.HTML
(Worldwide)
NOTE: For additional information regarding Rack Cabinets, please see the
following URL: http://www.hp.com/go/rackandpower.
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
DC172B
DC141B
DT528A#ABA
442085-B21
442084-B21
332815-B21
AF001A
AF002A
AF003A
AF004A
AF011A
AF012A
AF013A
AF014A
AF021A
AF022A
AF041A
AF042A
AF031A
Page 27
QuickSpecs
HP ProLiant DL385 Generation 2
Options
HP Rack 10000 Series HP S10614 (14U) Rack Cabinet - Shock Pallet
(Graphite Metallic)
NOTE: xxxxxx-B21 (pallet) used to ship empty racks shipped on a truck. -B22
(shock pallet) used to ship racks with equipment installed (by custom systems,
VARs and Channels). xxxxxx-B23 (crated) used for air shipments of empty
racks.
NOTE: It is mandatory to use a shock pallet in order to ship racks with
equipment installed. Not all HP or Compaq equipment is qualified to be shipped
in the Rack 10000 series.
NOTE: Please see the Rack 10000 QuickSpecs for Technical Specifications
such as height, width, depth, weight, and color:
http://h18000.www1.hp.com/products/quickspecs/10995_div/10995_div.HTML
(Worldwide)
NOTE: For additional information regarding Rack Cabinets, please see the
following URL: http://www.hp.com/go/rackandpower
292302-B22
Keyboards and
Monitors
348373-B21
AG052A
AG053A
TFT7210R Rack Mounted 17" Monitor
TFT7600 Rackmount Keyboard Monitor US
TFT7600 Rackmount Keyboard Monitor UK
TFT7600 Rackmount Keyboard Monitor GR
TFT7600 Rackmount Keyboard Monitor FR
TFT7600 Rackmount Keyboard Monitor IT
TFT7600 Rackmount Keyboard Monitor SP
TFT7600 Rackmount Keyboard Monitor DEN
TFT7600 Rackmount Keyboard Monitor NOR
TFT7600 Rackmount Keyboard Monitor SE/FI
TFT7600 Rackmount Keyboard Monitor SWI
TFT7600 Rackmount Keyboard Monitor PORT
TFT7600 Rackmount Keyboard Monitor BEL
TFT7600 Rackmount Keyboard Monitor JPN2
TFT7600 Rackmount Keyboard Monitor RUS
TFT7600 Rackmount Keyboard Monitor INTL
1U Rackmount Keyboard with USB, US
1U Rackmount Keyboard with USB, UK
1U Rackmount Keyboard with USB, GR
1U Rackmount Keyboard with USB, FR
1U Rackmount Keyboard with USB, ITL
1U Rackmount Keyboard with USB, SP
1U Rackmount Keyboard with USB, DEN
1U Rackmount Keyboard with USB, NOR
1U Rackmount Keyboard with USB, SE/FI
1U Rackmount Keyboard with USB, SWI
1U Rackmount Keyboard with USB, PORT
1U Rackmount Keyboard with USB, BEL
1U Rackmount Keyboard with USB, JPN2
1U Rackmount Keyboard with USB, RUS
1U Rackmount Keyboard with USB, INTL
NOTE: For additional information regarding Rack Options, please see the
following URL: http://www.hp.com/go/rackandpower.
AG054A
AG055A
AG056A
AG057A
AG058A
AG059A
AG060A
AG061A
AG062A
AG063A
AG064A
AG065A
AG066A
AG072A
AG073A
AG074A
AG075A
AG076A
AG077A
AG078A
AG079A
AG080A
AG081A
AG082A
AG083A
AG084A
AG085A
AG086A
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 28
QuickSpecs
HP ProLiant DL385 Generation 2
Options
HP KVM Switch
Options
HP Serial Console
Server Options
2x1x16 IP Console Switch with Virtual Media
4x1x16 IP Console Switch with Virtual Media
2x16 Server Console Switch with Virtual Media
PS/2 Virtual Media Interface Adapter, 1 pack
NOTE: Requires PS/2 and one USB port on server.
Server Console Switch (KVM), 0 x 1 x 8 port
Server Console Switch (KVM), 0 x 2 x 16 port
PS/2 Interface Adapter, 1 pack
PS/2 Interface Adapter, 8 pack
USB Interface Adapter, 1 pack
Serial Interface adapter - 1 Pack with power supply
NOTE: Cat5e cables are required to connect Interface Adapters to Console
Switches. Cat5e cables can be found at the following URL:
http://www.hp.com/go/kvm.
HP 1x4 Console Switch (ALL)
AF601A
AF602A
AF600A
AF604A
336044-B21
336045-B21
262588-B21
262587-B21
336047-B21
373035-B21
AF611A
PS2 Server Console Cable, 6 ft, 2 pack
USB Server Console Cable, 6 ft, 2 pack
NOTE: required for supporting USB peripherals.
NOTE: For additional information regarding KVM switches, Serial Console
servers, rack mount monitors, keyboards and all related options please see the
following URL: http://www.hp.com/go/kvm.
AF612A
AF613A
HP 16 Port Serial Console Server (worldwide)
HP 48 Port Serial Console Server (worldwide)
Serial Adapter, RJ45-DB9 DCE Female, 1 Pack
Serial Adapter, RJ45-DB9 DCE Female, 8 Pack
NOTE: Cat5e cables are required to connect Serial Adapters to Serial Console
Servers. Additional Serial Adapters and Cat5e cables can be found at the
following URL: http://www.hp.com/go/kvm.
NOTE: For additional information regarding KVM switches, Serial Console
servers, rack mount monitors, keyboards and all related options please see the
following URL: http://www.hp.com/go/kvm.
AF101A
AF102A
AF103A
AF110A
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 29
QuickSpecs
HP ProLiant DL385 Generation 2
Options
Service and Support
Offerings (HP Care
Pack Services)
Hardware Services On-site Service
4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic
4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic
Hardware Services 6-Hour Call to Repair On-site Service
6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,
Electronic
Installation & Start-up Services
Hardware Installation, Electronic
Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the
Customer Description and/or Data Sheet. To be delivered on a scheduled basis
8am-5pm, M-F, excl. HP holidays, Electronic
Installation and Startup for Essentials Rapid Deployment Pack, Electronic
Support Plus
Onsite HW support, 8am-9pm, M-F, 4hr response and Microsoft O/S SW Tech
support offsite, onsite at HP's discretion, 8am-9pm, M-F 2hr response time excl.
HP holidays, Electronic
Support Plus 24
Onsite HW support 24x7, 4hr response and Microsoft O/S SW Tech support
offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays,
Electronic
Onsite HW support 24x7, 4hr response and SuSE Linux SW Tech support
offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays,
Electronic
Onsite HW support 24x7, 4hr response and Red Hat ES Linux SW Tech support
offsite, onsite at HP's discretion, 24x7 2hr response time incl. HP holidays,
Electronic
NOTE: For more information, customer/resellers can contact
http://www.hp.com/services/carepack
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
U4544E
U4545E
U4546E
U4554E
U4555E
U5683E
U4556E
U4557E
U6312E
U8334E
Page 30
QuickSpecs
HP ProLiant DL385 Generation 2
Memory
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
HP ProLiant DL385 G2 Base Models
Standard Memory
2 GB PC2-5300 DDR2 DIMMs (667 MHz) installed (2 x 1 GB)
Upgrading Memory and Memory Interleaving
DIMMs must be installed in identical pairs. Bank interleaving is automatically enabled on a processor node under the
following conditions:
1) Four single ranked DIMMs populated per node (4 x 512 MB or 4 x 1 GB for example) yields 2-way bank interleaving.
2) Two dual ranked DIMMs populated per node (2 x 2 GB or 2 x 4 GB for example) yields 2-way bank interleaving.
3) Four dual ranked DIMMs populated per node (4 x 2 GB for example) yields 4-way bank interleaving.
If single and dual ranked DIMMs are mixed on the same node, bank interleaving will not be enabled.
Node interleaving can be configured via RBSU if both processors have the same memory footprint and it is independent of
bank interleaving.
DIMMs must be installed in decreasing capacity with the largest DIMMs installed in the banks furthest away from each
processor.
Standard Memory Plus Optional Memory
Up to 26 GB memory is available with the standard memory of 1GB and the optional installation of PC2-5300 DDR2 DIMMs
(667 MHz) memory kits. - 6 slots would be available, and potentially could be filled with 4GB DIMMs.
Standard Memory Replaced with Optional Memory
Up to 32 GB of memory is available with the removal of the standard 1GB of memory and the optional installation of PC25300 DDR2 4 GB DIMMs (667 MHz) memory kits.
NOTE: Chart does not represent all possible configurations.
NOTE: DIMM banks are active only when the corresponding processor socket is populated.
Memory
Standard
Optional
Maximum
2 GB
26 GB
32 GB
Slot
1
1 GB
4 GB
4 GB
2
1 GB
4 GB
4 GB
3
Empty
1 GB
4 GB
4
Empty
1 GB
4 GB
5
Empty
4 GB
4 GB
6
Empty
4 GB
4 GB
Following are memory options available from HP:
1 GB PC2-5300 DDR2 2 x 512 MB Kit
2 GB PC2-5300 DDR2 2 x 1 GB Kit
4 GB PC2-5300 DDR2 2 x 2 GB Kit
8 GB REG PC2-5300 (2 x 4GB) dual rank
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
7
Empty
4 GB
4 GB
8
Empty
4 GB
4 GB
408850-B21
408851-B21
408853-B21
408854-B21
Page 31
QuickSpecs
HP ProLiant DL385 Generation 2
Memory
HP ProLiant DL385 G2 Performance Models
Standard Memory
4 GB PC2-5300 DDR2 DIMMs (667 MHz) (4 x 1GB)
Upgrading Memory and Memory Interleaving
DIMMs must be installed in identical pairs. Bank interleaving is automatically enabled on a processor node under the
following conditions:
1) Four single ranked DIMMs populated per node (4x512 MB or 4x1 GB for example) yields 2-way bank interleaving.
2) Two dual ranked DIMMs populated per node (2x2 GB or 2x4 GB for example) yields 2-way bank interleaving.
3) Four dual ranked DIMMs populated per node (4x2 GB or 4x4 GB for example) yields 4-way bank interleaving.
If single and dual ranked DIMMs are mixed on the same node, bank interleaving will not be enabled.
Node interleaving can be configured via RBSU if both processors have the same memory footprint and it is independent of
bank interleaving.
DIMMs must be installed in decreasing capacity with the largest DIMMs installed in the banks furthest away from each
processor.
Standard Memory Plus Optional Memory
Up to 20 GB memory is available with the standard memory of 4*1 GB and the optional installation PC2-5300 DDR2 DIMMs
(667 MHz) memory kits. - 4 slots available (4*4 GB = 16GB + 4*1 GB standard = 20 GB).
Standard Memory Replaced with Optional Memory
Up to 32 GB of memory is available with the removal of the standard 1GB of memory and the optional installation of PC25300 DDR2 4 GB DIMMs (667 MHz) memory kits.
NOTE: Chart does not represent all possible configurations.
Memory
Standard
Optional
Maximum
4 GB
20 GB
32 GB
Slot
1
1 GB
4 GB
4 GB
2
1 GB
4 GB
4 GB
3
Empty
1 GB
4 GB
4
Empty
1 GB
4 GB
5
1 GB
4 GB
4 GB
6
1 GB
4 GB
4 GB
Following are memory options available from HP:
1 GB PC2-5300 DDR2 2 x 512 MB Kit
2 GB PC2-5300 DDR2 2 x 1 GB Kit
4 GB PC2-5300 DDR2 2 x 2 GB Kit
8 GB REG PC2-5300 (2 x 4GB) dual rank
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
7
Empty
1 GB
4 GB
8
Empty
1 GB
4 GB
408850-B21
408851-B21
408853-B21
408854-B21
Page 32
QuickSpecs
HP ProLiant DL385 Generation 2
Storage
1-8
Eight SFF SAS hot plug hard drive bays
Drive Support
Quantity
Supported
Removable Media
Slimline CD-RW/DVDROM Combo Option Kit
NOTE: Included in
performance models
Slimline DVD-ROM Drive
(8x/24x) Option Kit
Position
Supported
Controller
Only 1 available Slimline bay
removable
media bay
Integrated IDE
NOTE: Optional
Only 1 available Slimline bay
removable
media bay
Integrated IDE
NOTE: Optional
HP DVD+R/RW 8X Slim Only 1 available Slimline bay
removable
media bay
Integrated IDE
NOTE: Optional
Hard Drives
SAS - Hot Plug Drives
146GB 3G SAS 10K SP
146GB 3G SAS 10K DP
72GB 3G SAS 10K SP
72GB 3G SAS 10K DP
72GB 3G SAS 15K SP
72GB 3G SAS 15K DP
36GB 3G SAS 10K SP
36GB 3G SAS 15K SP
36GB 3G SAS 15K DP
Quantity
Supported
Up to 8
Position
Supported Controller
1-8
HP Smart Array E200/64MB Controller
HP Smart Array E200/128 BBWC Controller
HP Smart Array P400/256MB Controller
HP Smart Array P400/512MB BBWC Controller
HP Smart Array P600/256 BBWC Controller
NOTE: Optional mixed PCI-X/E required for SA-P600.
HP Smart Array P800/512 BBWC Controller
Quantity
Supported
Up to 8
Position
Supported Controller
1-8
HP Smart Array E200/64MB Controller
HP Smart Array E200/128 BBWC Controller
HP Smart Array P400/256MB Controller
HP Smart Array P400/512MB BBWC Controller
HP Smart Array P600/256 BBWC Controller
NOTE: Optional mixed PCI-X/E required for SA-P600.
HP Smart Array P800/512 BBWC Controller
SATA - Hot Plug Drives
120GB 1.5G SATA 5.4K
60GB 1.5G SATA 5.4K
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 33
QuickSpecs
HP ProLiant DL385 Generation 2
Storage
External Storage
Quantity
Supported
Modular Smart Array 50 2 per connector
Enclosure
(supports 1+1
cascading)
Modular Smart Array
1 per SCSI
500 G2
Position
Supported
External
Host Controller or Adapter
HP Smart Array P600/256 BBWC Controller
NOTE: Optional mixed PCI-X/E cage required.
External
Please see the Modular Smart Array 500 or 500 G2 QuickSpecs
for the latest list of supported HBAs:
http://www.hp.com/go/msa500.
Modular Smart Array 1000: http://h18000.www1.hp.com/products/quickspecs/11033_div/11033_div.HTML (Worldwide)
Modular Smart Array 1500 cs: http://www.hp.com/go/MSA1500cs
Maximum Storage Capacity - (with MSA50)
Internal
1.168TB (8 x 146GB SAS SFF)
External
2.920TB (20 x 146GB SAS SFF)
Total
4.088TB
Tape Drives, Tape Autoloaders, Tape Libraries & D2D Backup Systems
NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Drives listed below, please see the
following:
http://h18000.www1.hp.com/products/quickspecs/Division/10233.html (Worldwide)
NOTE: For an up-to-date listing of the latest O/S Support details for each of the Tape Autoloaders and Tape Libraries listed
below, please see the following:
http://h18000.www1.hp.com/products/quickspecs/Division/10809.html (Worldwide)
NOTE: For complete listing of tape drive offerings see
http://www.hp.com/products1/storage/compatibility/tapebackup/ISS/index.html
NOTE: SAS Tape Drives: Connecting hard drive cage and SAS tape to the same SAS Controller using split cable (supplied
with tape drive) deactivates 1 of the hard drive bays. Actual hard drive bay deactivated depends on where split cable plugs
into SAS drive connector. Example: 3x SAS cable connector plugged into SAS drive connector (5-8) on the back of the hard
drive cage would mean drive bay 8 is deactivated.
Position
Controller
Controller
Supported
Part Number
HP StorageWorks SCSI
External
HP SC11Xe Host Bus Adapter
412911-B21
Tape Drives, External
LTO-1 Ultrium 232
LTO-2 Ultrium 448
LTO-2 Ultrium 460
LTO-3 Ultrium 920
LTO-3 Ultrium 960
DAT 40
DAT 72
DAT 160
DLT VS160
SDLT 600
1U Rack-Mount Kit
3U Rack-Mount Kit
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 34
QuickSpecs
HP ProLiant DL385 Generation 2
Storage
HP StorageWorks USB
Tape Drives, External
DAT 40 USB
DAT 72 USB
DAT 160 USB
1U Rack-Mount Kit
External
USB 2.0 Port
N/A
HP StorageWorks SAS
Tape Drives, External
LTO-2 Ultrium 448 SAS
LTO-3 Ultrium 920 SAS
1U Rack-Mount Kit
External
HP SC44Ge Host Bus Adapter
NOTE: Recommended.
Smart Array E500/256MB Controller
NOTE: The following SAS Smart Array controllers require ROM
Flash version 2.04 or higher for SAS tape support:
HP Smart Array P400/256MB Controller
HP Smart Array P400/512MB Controller
NOTE: Please visit http://www.hp.com/go/connect for details
about minimum SAS controller firmware version and SAS
cabling requirements.
416096-B21
HP SC11Xe Host Bus Adapter
412911-B21
435129-B21
405132-B21
411064-B21
HP StorageWorks SCSI
Tape Automation,
External
DAT 72x10 Autoloader
1/8 Tape Autoloader
MSL2024
MSL4048
MSL8096
MSL6000
External
HP StorageWorks SAS
Tape Automation,
External
1/8 G2 Autoloader
MSL2024
MSL4048
MSL8096
External
HP StorageWorks
Fibre Tape
Automation, External
MSL2024
MSL4048
MSL6000
External
Please consult the EBS connectivity matrix at
http://www.hp.com/go/ebs for detailed connectivity information.
N/A
HP StorageWorks D2D
Backup Systems
D2D110
D2D120
External
Embedded Network Controller
N/A
HP U320e SCSI Host Bus Adapter
NOTE: Only valid for MSL tape libraries.
HP SC44Ge Host Bus Adapter
AH627A
416096-B21
NOTE: Please visit http://www.hp.com/go/connect for details
about minimum SAS controller firmware version and SAS
cabling requirements.
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 35
QuickSpecs
HP ProLiant DL385 Generation 2
Power Specifications
Power Supply Specification - AC Part number
Spare Kit
Operational Input Voltage Range
(Vrms)
Frequency Range (Nominal) (Hz)
Nominal Input Voltage (Vrms)
100
Max Rated Output Wattage Rating
800
Nominal Input Current (A rms)
10.0
Max Rated Input Wattage Rating
980
(Watts)
Max. Rated VA (Volt-Amp)
1000
Efficiency (%)
81.5
Power Factor
0.98
Leakage Current (mA)
0.44
Max. Inrush Current (A peak)
30
Max. Inrush Current duration (mS)
3
Power Supply Specification - DC Part number
Spare Kit
Operational Input Voltage Range (V)
Frequency Range (Nominal) (Hz)
Nominal Input Voltage (V)
-36
Max Rated Output Wattage Rating
1200
Nominal Input Current (A)
38
Max Rated Input Wattage Rating
1368
(Watts)
Efficiency (%)
87.6
Max. Inrush Current (A peak)
60
Max. Inrush Current duration (mS)
100
380622-001
403781-001
90 to 264
120
850
8.8
1035
47 to 63 (50/60)
208
220
1000
1000
5.85
5.5
1193
1186
230
1000
5.2
1172
240
1000
4.97
1169
1056
82
0.98
0.52
30
3
1217
84
0.98
0.91
30
3
1196
85
0.98
1.00
30
3
1193
85.5
0.98
1.04
30
3
-48
1200
29
1392
87.6
60
100
1210
84
0.98
0.96
30
3
412837-001
419613-001
-36.0 to -72.0V DC
DC
-72
1200
20
1440
86
60
100
NOTES:
- To review typical system power ratings use the Active Answers Power Calculator which is available via the online tool
located at url: http://h30099.www3.hp.com/configurator/calc/Power%20Calculator%20Catalog.xls
To drill down to calculators:
Click on: "ProLiant Servers"
Click on the Server of interest. Example: DL385 G2
Click on: "Power Calculator" link. (You may need to scroll down to see it)
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 36
QuickSpecs
HP ProLiant DL385 Generation 2
Technical Specifications
System Unit
Dimensions (H x W x D) 3.38 x 17.54 x 26.01 in (8.59 x 44.54 x 66.07 cm)
(with bezel)
Weight
Maximum
60 lb (27.22 kg)
(approximate)
(all hard drives, power
supplies, and processors
installed)
Minimum
47.18 lb (20.41 kg)
(one hard drive, power
supply, and processor
installed)
Input Requirements
Rated Line Voltage
100 VAC,
(per power supply)
120VAC,
200-240 VAC
Rated Input Current
10 A (at 100 VAC),
9 A (at 120 VAC),
6.1 A (at 200 VAC)
Rated Input Frequency 50 to 60 Hz
Rated Input Power
980 W (at 100 VAC),
1035 W (at 120 VAC),
1170 W (at 240 VAC)
BTU Rating
Maximum
3350 BTU/hr (at 100 VAC),
3530 BTU/hr (at 120 VAC),
3990 BTU/hr (at 240 VAC)
Power Specifications To review typical system power ratings use the Power Calculator which
is available via the online tool located at URL:
http://h30099.www3.hp.com/configurator/calc/Power%20
Calculator%20Catalog.xls
- Click on the system of interest. Example: DL385 G2
- Follow the instructions of the next screens.
Power Supply Output
(per power supply)
Rated Steady-State
Power
Maximum Peak Power
System Inlet
Temperature
Operating
Non-operating
Relative Humidity
(non-condensing)
Operating
800 W (at 100 VAC),
850 W (at 120 VAC),
1000 W (at 200-240 VAC)
800 W (at 100 VAC),
850 W (at 120 VAC),
1000 W (at 200-240 VAC)
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change
is 10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if
operating with a fan fault or above 30°C
(86°F).
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
10 to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature, noncondensing.
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 37
QuickSpecs
HP ProLiant DL385 Generation 2
Technical Specifications
Non-operating
Altitude
Acoustic Noise
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature,
non-condensing.
Operating
3050 m (10,000 ft). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is
457 m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500
ft/min).
Listed are the declared A-Weighted sound power levels (LWAd) and
declared average bystander position A-Weighted sound pressure levels
(LpAm) when the product is operating in a 23°C ambient environment.
Noise emissions were measured in accordance with ISO 7779 (ECMA
74) and declared in accordance with ISO 9296 (ECMA 109).
Idle
LWAd
6.3 B
LpAm
47 dBA
Operating
LWAd
LpAm
Smart Array P400
Controller
Disk Drive and
Enclosure Interface
6.3 B
47 dBA
3G SAS (Serial Attached SCSI)
1.5G SATA (Serial Advanced Technology Attachment)
SAS Connectors
2 internal (SFF8484) x4 wide port connectors
Cache Memory Speed DDR2-533MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s
maximum bandwidth.
Server Interface
x8 2.5G PCIe provides 2GB/s maximum bandwidth.
SAS Speed
x8 3G SAS provides 2.4GB/s maximum bandwidth.
Cache Memory
40-bit 256MB cache (72-bit 512MB module upgrades available); ECC
protection, battery-backed, and transportable
Logical Drives
Up to 32 logical drives
Supported
Maximum Logical Drive3TB (6 x 500GB)
Capacity
Host Memory
64-bit, supporting greater than 4GB server memory space
Addressing
RAID Support
RAID 6 with ADG (Advanced Data Guarding) requires Battery Backed
Write Cache Upgrade
RAID 5 (Distributed Data Guarding)
RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping)
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 38
QuickSpecs
HP ProLiant DL385 Generation 2
Technical Specifications
Smart Array E200
Controller
Disk Drive and
Enclosure Interface
3G SAS (Serial Attached SCSI)
1.5G SATA (Serial Advanced Technology Attachment)
SAS Connectors
2 internal (SFF8484) x4 wide port connectors
Cache Memory Speed DDR1-266 MHz provides up to 4.2 GB/s maximum bandwidth.
Server Interface
x8 2.5G PCIe provides 2GB/s maximum bandwidth.
SAS Speed
x8 3G SAS provides 2.4GB/s maximum bandwidth.
Cache Memory
40-bit 64MB cache or a 128MB battery backed cache: ECC protection,
battery-backed, and transportable
Logical Volumes
Up to 32 logical volumes
Supported
Maximum Volume
3 TB (6 x 500 GB)
Capacity
Host Memory
64-bit, supporting greater than 4GB server memory space
Addressing
RAID Support
RAID 5 (Distributed Data Guarding)
RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping)
Two Embedded NC373i Network Interface
Multifuntion Gigabit
Compatibility
Server Adapters
10Base-T/100Base-TX/1000Base-TX
IEEE 802.3 10Base-T
IEEE 802.3ab 1000Base-T
IEEE 802.3u 100Base-TX
Data Transfer Method PCI Express, four lanes (x4)
Network Transfer Rate 10Base-T (Half-Duplex) 10 Mb/s
10Base-T (Full-Duplex) 20 Mb/s
100Base-TX (Half100 Mb/s
Duplex)
100Base-TX (Full200 Mb/s
Duplex)
1000Base-TX (Half and 2000Mb/s
Full-Duplex)
Connector
Two RJ-45
Cable Support
10Base-T
Categories 3, 4 or 5 UTP;
up to 328 ft (100 m)
100Base-TX
Category 5 or higher UTP;
up to 328 ft (100 m)
1000BaseTX
Category 5 or higher UTP;
up to 328 ft (100 m)
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 39
QuickSpecs
HP ProLiant DL385 Generation 2
Technical Specifications
Environment-friendly
Products and
Approach
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to http://www.hp.com/go/green. To recycle your product,
please go to: http://www.hp.com/go/green or contact your nearest HP
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at: http://www.hp.com/go/green. These
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
© Copyright 2007 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation.
AMD is a US registered trademark of AMD Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For hard drives, 1 GB = 1 billion bytes. Actual formatted capacity is less.
DA - 12565 Worldwide QuickSpecs — Version 26 — 9.21.2007
Page 40
Download PDF