2 YEAR LIMITED WARRANTY

OUTPUT

INPUT

POWER SAVE

(SLEEP MODE)

DISPLAY

REMOTE

OPERATION

PROTECTIONS

COOLING

COMPLIANCE

ENVIRONMENT

DIMENSIONS

WEIGHT

MODEL NO.

OUTPUT VOLTAGE

OUTPUT FREQUENCY

TYPE OF OUTPUT WAVEFORM

TOTAL HARMONIC DISTORTION OF OUTPUT WAVEFORM

CONTINUOUS OUTPUT POWER (At Power Factor = 1)

SURGE OUTPUT POWER (At Power Factor = 1)

PEAK EFFICIENCY (At full load)

AC OUTPUT CONNECTIONS

NOMINAL DC INPUT VOLTAGE

DC INPUT VOLTAGE RANGE

DC INPUT CURRENT AT NO LOAD (Power Save on)

DC INPUT CURRENT AT NO LOAD (Power Save off)

DC INPUT CONNECTIONS

ENABLED / DISABLED BY SWITCH

INPUT VOLTAGE, OUTPUT POWER, STATUS

WIRED REMOTE CONTROL (Simple version) (Optional)

WIRED REMOTE CONTROL (Upgraded version) (Optional)

LOW DC INPUT VOLTAGE ALARM

LOW DC INPUT VOLTAGE SHUTDOWN

HIGH DC INPUT VOLTAGE SHUTDOWN

SHORT CIRCUIT SHUTDOWN

OVERLOAD SHUTDOWN

GROUND FAULT SHUTDOWN

OVER TEMPERATURE SHUTDOWN

REVERSE POLARITY ON DC INPUT SIDE

FORCED AIR COOLING

SAFETY

EMI / EMC

OPERATING TEMPERATURE RANGE

STORAGE TEMPERATURE RANGE

(L X W X H), MM

(L X W X H), INCHES

KG

LBS

NOTE: Specifications are subject to change without notice

2000W

Model

DC-AC Inverter

Pure Sine Wave

SA-2000K-112

12 VDC-120 VAC

SA-2000K-124

24 VDC-120 VAC

Design Features

- Pure sine wave output (THD < 3%)

- Switch selectable output frequency: 50 / 60 Hz

- Switch selectable Power Save Mode wherein the inverter shuts off non essential circuitry and reduces its no load self consumption till it sees a minimum programmed load

(40 - 280 Watts)

- Optional wired remote controls for switching and monitoring the operation. Includes Ignition Lockout and

Reverse Over-ride Function (ROF)

- Input and output are fully isolated

- Advanced micro-controller

- 2 load controlled cooling fans save power consumption

- 3 tri-color LEDs display operational status and fault indications

SA-2000K-112 SA-2000K-124

120 VAC, +/- 5%

50 / 60 Hz +/- 0.05% (Selected by Switch)

Pure Sine Wave

< 3%

2000 W 2000 W

4000 W for 3 sec

89%

4000 W for 3 sec

92%

Dual NEMA5-20R receptacles with GFCI protection; Terminal strip for hardwiring

12 VDC

10.5 to 15 VDC, +/- 0.2 VDC

0.6 A

2.8 A

24 VDC

21 to 30 VDC, +/- 0.4 VDC

0.3 A

1.5 A

M-8 bolt and nut / Wire with M-8 ring lug terminal

Wake up power: 40 to 280 W (switch selectable)

By steady / flashing patterns of three, 3- color LEDs

SR-6-12 with 10 ft cable

SR-8 with 10 ft cable

SR-6-24 with 10 ft. cable

10.5 VDC, +/- 0.2 VDC

10.0 VDC, +/- 0.2 VDC

15.0 VDC, +/- 0.2 VDC

21.0 VDC, +/- 0.4 VDC

20.0 VDC, +/- 0.4 VDC

30.0 VDC , +/- 0.4 VDC

Yes

Yes

Yes. Only for the GFCI protected dual NEMA5-20R receptacles

Yes

Yes. Internal fuses will blow

2 load controlled fans: ON > 300W ; OFF < 160W

Meets UL-458

Meets FCC Part 15(B), Class A

0 oC to + 40 oC

- 30 oC to 70 oC

422 x 208 x 166

16.6 x 8.18 x 6.53

9

19.8

12003-SA-2000K-112-124-0715

To view a full selection of Samlex products visit our website at www.samlexamerica.com

or contact us: 1-800-561-5885 or [email protected]