ViewSonic | VA2012wb-2 | Service manual | ViewSonic VA2012wb-2 Service manual

Service Manual
ViewSonic VA2012w-2
VA2012wb-2
Model No. VS10859
20” Color TFT LCD Display
(VA2012w-2_VA2012wb-2_SM Rev. 1a Jun. 2006)
ViewSonic 381 Brea Canyon Road, Walnut, California 91789 USA - (800) 888-8583
Copyright
Copyright © 2006 by ViewSonic Corporation. All rights reserved. No part of this publication
may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language or computer language, in any form or by any means, electronic, mechanical, magnetic,
optical, chemical, manual or otherwise, without the prior written permission of ViewSonic
Corporation.
Disclaimer
ViewSonic makes no representations or warranties, either expressed or implied, with respect to
the contents hereof and specifically disclaims any warranty of merchantability or fitness for any
particular purpose. Further, ViewSonic reserves the right to revise this publication and to make
changes from time to time in the contents hereof without obligation of ViewSonic to notify any
person of such revision or changes.
Trademarks
Opt quest is a registered trademark of ViewSonic Corporation.
ViewSonic is a registered trademark of ViewSonic Corporation.
All other trademarks used within this document are the property of their respective owners.
Revision History
Revision
SM Editing Date
1a
6/19/2006
ViewSonic Corporation
ECR Number
Description of Changes
Initial Release
i
Confidential - Do Not Copy
Editor
J. Chang
VA2012w-2_VA2012wb-2
TABLE OF CONTENTS
1.
Precautions and Safety Notices
1
2.
Specification
4
3.
Front Panel Function Control Description
10
4.
Circuit Description
12
5.
Adjustment Procedure
25
6.
Troubleshooting Flow Chart
50
7.
Recommended Spare Parts List
53
8.
Exploded Diagram and Exploded Parts List
58
9.
Block Diagram
62
10. Schematic Diagrams
63
11. PCB Layout Diagrams
70
ViewSonic Corporation
ii
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
1. Precautions and Safety Notices
1.
Caution :
No modification of any circuit should be attempted . Service work should only be performed after you are thoroughly
familiar with all of the following safety checks and servicing guide line
2.
Safety Check :
Care should be taken while servicing this LCD display. Because of the high voltage used in the inverter circuit. These
voltage are exposed in such areas as the associated transformer circuits .
3.
POWER SUPPLY REQUIREMENTS
The external power converter for this display utilizes AC and DC cords , AC cord is detachable , but DC cord is
permanently attached . Any attempt to replace another adapter could result in serious problem on the display .
4.
LEAKAGE CURRENT HOT CHECK
4-1 Plug the AC cord directly into the AC outlet. Do not use an isolation transformer during this check.
4-2
Connect a 1500 ohm , 10 watt resistor , paralleled by a 0.15uF capacitor between each metallic part and a good earth
ground
4-3 Use an AC voltmeter with 1000 ohm / volt or more sensitivity and measure the AC voltage across the combination
1500 ohm resistor and 0.15uF capacitor.
4-4
Move the resistor connection to each exposed metallic part and measure the voltage.
4-5
Reverse the polarity of the AC plug in the AC outlet and repeat the above measurement.
4-6
Voltage measured must not exceed 1.5 volt RMS, from any exposed metallic part to the ground. A leakage current
tester may be used in the above hot check, in which case any circuit measured must not exceed 1.0 milliamp. In the
case of a measurement exceeding the 1.0 milliamp value, a rework is required to eliminate the chance of a shock
hazard .
AC VOLTMETER
V
0.15u
.
To Metal Parts
ViewSonic Corporation
1500
10W
Earth Ground
1
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Handing and Placing Methods
incorrect method
Take out the monitor by grasping the LCD
panel. That may cause “ MURA“.
correct method
Take out the monitor with cushion
Place the monitor on a clean & soft foam pad
could
scratch the surface of panel
Do not touch the surface of the polarizer .
Surface of the panel is pressed by fingers &
this may cause “ MURA “
ViewSonic Corporation
2
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
when assemble&disassembly
bezel
when assemble&disassembly
bezel
when assemble&disassembly
bracket
ViewSonic Corporation
when assemble&disassembly
bracket
3
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
2. Specification
GENERAL specification
Test Resolution & Frequency
“1680 X 1050” @ 60Hz
Test Image Size
Full Size
Contrast and Brightness Controls
Factory Default:
Contrast = 70%, Brightness = 100%
VIDEO INTERFACE
Analog Input Connector
DB-15 (Analog), refer the appendix A
Digital Input Connector
N/A
Default Input Connector
Defaults to the first detected input
Video Cable Strain Relief
Equal to twice the weight of the monitor for five minutes
Video Cable Connector DB-15 Pin out
Compliant DDC 1/2B
Video Signals
1. Video RGB (Analog) :Separate
2. TMDS (Digital)—N/A
Video Impedance
75 Ohms (Analog)
Maximum PC Video Signal
950 mV with no damage to monitor
Maximum Mac Video Signal
1250 mV with no damage to monitor
Sync Signals
TTL
DDC 1/2B
Compliant with Revision 1.3
Sync Compatibility
Separate Sync
Video Compatibility
Shall be compatible with all PC type computers, Macintosh
computers, and after market video cards
Resolution Compatibility
640 x 350, 640 x 480, 720 x 400 (640 x 400), 800 x 600,
832 x 624, 1024 x 768, 1280 x 720, 1280 x 1024, 1600 x
1200, 1680 x 1050
Exclusions
Not compatible with interlaced video
POWER SUPPLY
Internal Power Supply
Part Number: EADP-64CF
Input Voltage Range
90 to 264 VAC
Input Frequency Range
47.5 to 63 Hertz
Short Circuit Protection
Output can be shorted without damage
Over Current Protection
Output current
Leakage Current
3.5mA (Max) at 254VAC / 60Hz
Efficiency
80 % typical at 115VAC Full Load
Fuse
Internal and not user replaceable
Power Dissipation
64 Watts (typ)
Max Input AC Current
1.5 Arms @ 90VAC
Inrush Current (Cold Start)
80 A(max) @230VAC
<10A
Shall start and function properly when under full load, with all
Power Supply Cold Start
combinations of input voltage, input frequency, and operating
temperature
ViewSonic Corporation
4
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Power Supply Transient Immunity
Power Supply Line Surge Immunity
Shall be able to withstand an ANSI/IEEE C62.41-1980 6000V 200
ampere ring wave transient test with no damage
Shall be able to withstand 1.5 times nominal line voltage for one
cycle with no damage
Shall be able to function properly, without reset or visible screen
Power Supply Missing Cycle Immunity
artifacts, when ½ cycle of AC power is randomly missing at
nominal input
The power supply shall not produce audible noise that would be
Power Supply Acoustics
detectable by the user.
Audible shall defined to be in compliance
with ISO 7779 (DIN EN27779:1991) Noise measurements of
machines acoustics. Power Switch noise shall not be considered
US Type Power Cable
European Type Power Cable
Power Saving Operation(Method)
Power Consumption
Recovery Time
Separate 3-prong NEMA 5-15P type plug.
Length = 1.8m.
Connects to AC outlet. Color = Black
Schuko CEE7-7.
Length = 1.8m, Connects to AC outlet. Color =
Black
VESA DPMS Signaling
ON Mode < 50 W (max) / 47 W (typ)
ACTIVE OFF < 2W
ON Mode = N/A, ACTIVE OFF < 3 sec
ELECTRICAL REQUIREMENT
Horizontal / Vertical Frequency
Horizontal Frequency
Analog: 30 – 94 kHz
Vertical Refresh Rate
50 – 75 Hz.
Maximum Pixel Clock
Analog: 205 Mhz
Sync Polarity
Independent of sync polarity.
Timing Table
Item
Timing
Analog
Digital
1
640 x 350 @ 70Hz, 31.5kHz
Yes
N/A
2
640 x 400 @ 70Hz, 31.5kHz
Yes
N/A
3
640 x 480 @ 60Hz, 31.5kHz
Yes
N/A
4
640 x 480 @ 67Hz, 35.0kHz
Yes
N/A
5
640 x 480 @ 72Hz, 37.9kHz
Yes
N/A
6
640 x 480 @ 75Hz, 37.5kHz
Yes
N/A
7
720 x 400 @ 70Hz, 31.5kHz
Yes
N/A
8
720 x 480i 59.94/60Hz @ 15.7 kHz
Yes
N/A
9
720 x 576p 50Hz @ 31.25kHz
Yes
N/A
10
720 x 576i 50Hz @ 15.62kHz
Yes
N/A
11
800 x 600 @ 56Hz, 35.1kHz
Yes
N/A
ViewSonic Corporation
5
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
12
800 x 600 @ 60Hz, 37.9kHz
Yes
N/A
13
800 x 600 @ 75Hz, 46.9kHz
Yes
N/A
14
800 x 600 @ 72Hz, 48.1kHz
Yes
N/A
15
832 x 624 @ 75Hz, 49.7kHz
Yes
N/A
16
1024 x 768 @ 60Hz, 48.4kHz
Yes
N/A
17
1024 x 768 @ 70Hz, 56.5kHz
Yes
N/A
18
1024 x 768 @ 72Hz, 58.1kHz
Yes
N/A
19
1024 x 768 @ 75Hz, 60.0kHz
Yes
N/A
20
1280x720p 50Hz @ 37.5kHz
Yes
N/A
21
1280x 720p @ 60Hz, 45kHz
Yes
N/A
22
1280 x 1024 @ 60Hz, 63.4kHz
Yes
N/A
23
1280 x 1024 @ 75Hz, 79.97kHz
Yes
N/A
24
1600 x 1200 @ 60Hz, 75kHz
Yes
N/A
25
1600 x 1200 @ 70Hz, 87.5kkHz
Yes
N/A
26
1600 x 1200 @ 75Hz, 93.8kHz
Yes
N/A
27
1680 x 1050 @ 60Hz, 65.3 kHz
Yes
N/A
28
1680 x 1050 @ 75Hz, 82.3 kHz
Yes
N/A
29
1920 x 1080i @ 50Hz, 56.5kHz
Yes
N/A
30
1920 x 1080p @ 50Hz, 62.5kHz
Yes
N/A
Primary Presets
“1680 x 1050” @ 60Hz
User Presets
Number of User Presets (recognized timings) Available: 10 presets total in FIFO configuration
Changing Modes
z Maximum Mode Change Blank Time for image stability : 3 seconds (Max), excluding “Auto Adjust” time
z Under DOS mode (640 x 350, 720 x 400 & 640 x 400),
it should recall factory setting when execute
“Auto Adjust”
z The monitor needs to do “Auto Adjust” the first time a new mode is detected
z (see section “0-Touch™ Function Actions”)
z While running Change Mode, Auto Adjust or Memory Recall, the image shall blank
ViewSonic Corporation
6
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
AUDIO INTERFACE (SPEAKER SPECIFICATION)
Line input connection
3.5 mm stereo jack
Line input signal
1.3 Vrms
Line input impedance
10 kOhm
Maximum power output (Electric)
1 W @ < 5% distortion
Signal to Noise Ratio
72 dB
Frequency response
200 Hz – 20 Khz
Distortion
< 5 % THD (@1kHz)
There should be no audible vibration with volume at 100% and
Vibration
treble / bass at default
There should be no affect on the screen image stability under any
Screen image
conditions
Connector PC99 requirement Audio in
Lime Green pantone # 577C
Cable type / length
3.5mm stereo cable / 1.8m length
Panel Characteristics:
1st Source Panel
QDI QD20AL01
Type
TN Technology”
Active Size
433.44 (H) x 270.9 (V)
Pixel Arrangement
RGB Vertical Stripe
Pixel Pitch
0.258 mm
Glass Treatment
Anti Glare (Hard coating 3H)
# of Backlights
6 CCFL edge-light (3 top / 3 bottom)
Backlight Life
40,000 Hours (Min)
Luminance –
Condition:
300 cd/m2 (Typ after 30 minute warm up)
CT = 6500K, Contrast = Max, Brightness = Max
240 cd/m2 (Min after 30 minute warm up)
Brightness Uniformity
77 % Entire Area (typ)
Contrast Ratio
600:1 (Typ), 400:1 (Min)
Color Depth
16.2 million colors (6 bit panel)
Viewing Angle (Horizontal)
140 deg @ CR>10, 160 deg @ CR>5
Viewing Angle (Vertical)
125 deg @ CR>10,
Response Time
8 ms (Tr= 2 ms, Tf = 6 ms) (Typ)
10%-90% @ Ta=25°C
16 ms (Tr= XXX ms, Tf = XXX ms) (Max)
Panel Defects
Please see Panel Quality Specifications.
ViewSonic Corporation
140 deg @ CR>5
7
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
2nd Source Panel
AUO M201EW01 V.0
Type
MVA Technology”
Active Size
433.44 (H) x 270.90(V)
Pixel Arrangement
RGB Vertical Stripe
Pixel Pitch
0.258 mm
Glass Treatment
Anti Glare (Hard coating 3H)
# of Backlights
6CCFL edge-light (3 top / 3 bottom)
Backlight Life
50.000 Hours (Min)
Luminance –
300cd/m2 (Typ after 30 minute warm up)
Condition:
240 cd/m2 (Min after 30 minute warm up)
CT = 6500K, Contrast = Max, Brightness = Max
Brightness Uniformity
75 % Entire Area (minimum)
Contrast Ratio
800:1 (Typ), 4001 (Min)
Color Depth
16.7 million colors (8bit panel)
Viewing Angle (Horizontal)
176 deg (Typ), 150deg(Min) @ CR>10
Viewing Angle (Vertical)
176 deg (Typ), 150deg(Min) @ CR>10
16ms (Tr=11 ms, Tf = 5 ms) (Typ)
Response Time
40 ms (Tr= 25ms, Tf = 15ms) (Max)
10%-90% @ Ta=25°C
G to G 8ms (Average)
Panel Defects
Please see Panel Quality Specifications.
IMAGE PERFORMANCE
Factory Defaults
Item
Defaults
Item
Defaults
Contrast
70%
OSD V. Position
50%
Brightness
100%
OSD Time Out
15 Sec
Volume
50%
OSD Background
On
Color Temperature
6500K
OSD PIVOT
Off
Sharpness
1
Resolution Notice
Enabled
OSD H. Position
50%
720x400/640x400
720x400
Display Size
Horizontal Display Size, Primary Preset
Full Screen
Vertical Display Size, Primary Preset
Full Screen
ViewSonic Corporation
8
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
MECHANICAL
Dimension (Desktop)
Width
479 mm
Height
423 mm
Depth
216 mm
Monitor Weight
5.5 kg / 12.1 lbs
Dimension (Head Only / Wall Mount)
Width
479 mm
Height
350.5 mm
Depth
62.7 mm
Monitor Weight
4.9 kg / 10.78 lbs
Ergonomics
Tilt Up
20 DEGREES MINIMUM
Tilt Down
-5 degrees
Swivel Right
N/A
Swivel Left
N/A
Cabinet Material
Display Head Plastic Material
ABS UL94HB
Neck/Base Plastic Material
ABS UL94HB
Internal Plastic Cabinet Components
Front Bezel Color
All internal plastic cabinet components shall be in compliance with the
requirements of TCO’03
The reference for the bezel is the silver color chip for VA2012w and
midnight gray color for VA2012wb provided by ViewSonic
The reference for the bezel is the black color chip for VA2012w and
Neck, Base, Speaker Cover, and
Rear Cover Color
midnight gray color for VA2012wb provided by ViewSonic.
The color difference between any two cabinet
components shall be less than 0.80 “Delta E”,
in the 1976 CIE L*a*b Colorspace.
The color drift due to UV-Light shall be less than 3.0 “Delta E” in the
Cabinet Color Drift Due To UV-Light
1976 CIE L*a*b colorspace.
Testing shall be performed according to
the requirements of ASTM Test Method D4459-93.
Cabinet Texture
Samples
ViewSonic Corporation
Mold-Tech # 11010 used on all external textured surfaces.
The supplier shall submit textured color chips, plastic material
specifications, and Material Safety Data Sheets for approval.
9
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
3. Front Panel Function Control Description
ViewSonic Corporation
10
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Main Menu Controls
Adjust the menu items shown below by using the up and down buttons.
A. Auto Image Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion. Press the [2]
button to obtain a sharper image.
NOTE: Auto Image Adjust works with most common video cards. If this function does not work on your LCD display,
then
lower the video refresh rate to 60 Hz and set the resolution to its pre-set value.
B. Contrast adjusts the difference between the image background (black level) and the foreground (white level).
C. Brightness adjusts the lamps current to control the screen brightness.
D. Input adjusts the Analogue or the Digital input source
E. Audio Adjust the volume increase or decrease and mute function
F.
Color Adjust provides several color options: preset color temperatures and Custom User Color which allows you to adjust red (R),
green (G), and blue (B). The factory setting for this product is 6500K (6500° Kelvin).
9300K — Adds blue to the screen image for cooler white (used in most office settings with fluorescent lighting).
5400K — Adds red to the screen image for warmer white and richer red.
Custom User Color — Individual adjustments for red, green, and blue.
1 To select color (R, G or B) press button [2].
2 To adjust selected color, press
or
.
3 When you are finished making all color adjustments, press button [1] twice.
G. Information displays the timing mode (video signal input) coming from the graphics card in your computer. See your graphic
card’s user guide for instructions on changing the resolution and refresh rate (vertical frequency). VESA 1280 x 1024 @ 60 Hz
(recommended) means that the resolution is 1280 x 1024 and the refresh rate is 60 Hertz.
H. Manual Image Adjust controls are explained below:
H. Size (Horizontal Size) adjusts the width of the screen image.
NOTE: Vertical size is automatic with your LCD display.
H./V. Position adjusts horizontal and vertical position of the screen image. You can toggle between Horizontal and Vertical by
pressing button [2]. Horizontal moves the screen image to the left or to the right. Vertical moves the screen image up and down.
Fine Tune sharpens focus by aligning the illuminated text and/or graphic characters.
Sharpness adjusts the clarity and focus of the screen image.
Setup Menu controls are explained below:
Language allows you to choose the language used in the menus and control screens.
Resolution Notice displays the recommended resolution for this LCD display.
Enable allows the Resolution Notice to appear on-screen.
Disable will not allow the Resolution Notice to appear on-screen.
OSD Timeout sets the length of time an on-screen display screen is displayed. For example,
with a“15 second” setting, if a
control is not pushed within 15 seconds, the display OSD disappears.
I.
OSD Position allows you to move the on-screen display menus and control screens.
J.
Memory Recall returns adjustments to the original factory settings if the display is operating in a factory Preset Timing Mode listed
in this user guide.
ViewSonic Corporation
11
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
4. Circuit Description
1.
Outline
1.1 Power On/Off, (2) Enter button, up arrow button, down arrow button, (1) MENU button, Volume “+” button, Volume
“-“button and Mute button on the front panel.
1.2 D-sub 15pin connector, audio line-in receptacle, and AC-IN are located on the back side of the cabinet.
1.3 OSD menu includes the following function;
Auto Image Adjust (only active under analog input)
Contrast/Brightness
Audio Adjust
Color Adjust
Information
Manual Image Adjust
Setup Menu
Memory Recall
1.4 Contrast and Brightness can be directly controlled with UP / DOWN key.
1.5 Audio volume can be controlled with Volume “+” key ,Volume “-“ key and UP/DN key when Audio Adjust menu is
active.
1.6 Pushing Mute key can disable audio output.
2.
CONNECTORS
2.1 AC inlet : CEE22 typed connector
2.2 Audio : Line-in,
CN9
1
5
4
3
2
Line-in receptacle
(Line-in receptacle is green)
ViewSonic Corporation
12
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
2.3 Video signal connector for analog input: 15P Mini D-Sub
16
11
1
6
2
7
3
8
4
9
5
10
12
13
14
15
CN6
DB15HD
17
3.
PIN
MNEMONI
SIGNAL
1
RV
Red Video
2
GV
Green Video
3
BV
Blue Video
4
NC
None
5
GND
Ground (DDC return)
6
RG
Red GND
7
GG
Green GND
8
BG
Blue GND
9
+5V
+5V (for DDC)
10
SG
Sync GND
11
NC
None
12
SDA
DDC Data
13
HS
Horizontal Sync
14
VS
Vertical Sync
15
SCL
DDC Clock
ELECTRICAL SPECIFICATIONS
3.1 Standard conditions
Display Area
433.44 x 270.9 mm
Video Signal
0.7Vpp
Contrast
Default
Brightness
Default
Ambient
20 +/- 5 °C
Input
AC
Warming up
> 30 min
Display
1680 x 1050
3.2 POWER
3.2.1
Power supply
Input voltage
100~240Vac
Power frequency
50~60Hz
Input current
<1.5Arms@90Vac
Inrush current
80A(Max) at 230Vac(cold start)
Power consumption
47W(typical);50Watts(Max)
ViewSonic Corporation
13
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
3.2.2
Power Management
State
Power
Indicator
On
47Watts
Blue
Standby
< 2Watts
Amber
Off
<2Watts
Off
3.3 Acceptable timing
If the timing is within following specification, this LCD display can automatically function with a certain position.
Horizontal: Sync frequency: 30~94 KHz (Analog),
Vertical: Sync frequency: 50~75*Hz
3.4 Signal level and input impedance
3.4.1
Video Signal level: 0.7Vp-p Video signal.
3.4.2
Sync Signal level
H/V Separate: TTL level
3.4.3
Input impedance
Analog video input: 75 ohm
Sync input: > 1 k ohm
Audio input: 10K ohm
4. SIGNAL CABLE: Signal cable with Mini D-Sub 15P connectors at both ends.
ViewSonic Corporation
Length: 1.8 meter.
14
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
4.
EDID data
VA2012w -2 Analog:
______________________________________________________________________
VIEWSONIC CORPORATION
EDID Version # 1,
Revision # 3
DDCTest For: ViewSonic VA2012w-2
______________________________________________________________________
EDID Block 0, Bytes 0-127
128 BYTES OF EDID CODE:
0
1
2
3
4
5
6
7
8
9
________________________________________
0
| 00 FF
FF
FF
FF FF FF 00 5A 63
10
| 1C 6A 01 01 01 01 01 10 01 03
20
| 08 2B 1B 78 2E C3 15 A6 56 4A
30
| 9B 24 16 50 54 BF
40
| A9 40 90 40 90 4F 81 80 81 40
50
| 71 4F A9 4F 21 39 90 30 62 1A
60
| 27 40 68
70
| 00 1C 00 00 00 FF 00
80
| 30 36 30 31 30 30 30 30 31 0A
90
| 00 00 00 FD 00 32 4B 1E 5E 15
100
| 00 0A 20 20 20 20 20 20 00 00
B3 0F
B0 36 00 AE 0E 11 00
110 | 00 FC 00 56
120
EF 80
51 39 32
41 32 30 31 32 77
| 2D 32 0A 20 20 20 00 FF
______________________________________________________________________
(08-09) ID Manufacturer Name ________________
= VSC
(11-10) Product ID Code _____________________
= 6A1C
(12-15) Last 5 Digits of Serial Number ______
= Not Used
(16)
Week of Manufacture _________________ = 01
(17)
Year of Manufacture _________________
(10-17) Complete Serial Number ______________
= 2006
= See Descriptor Block
(18)
EDID Version Number _________________ = 1
(19)
EDID Revision Number ________________
(20)
VIDEO INPUT DEFINITION:
=3
Analog Signal
0.700, 0.300 (1.000 Vp-p)
Separate Syncs
(21)
Maximum Horizontal Image Size ________________
= 430 mm
(22)
Maximum Vertical Image Size __________________
= 270 mm
(23)
Display Gamma ________________________________
ViewSonic Corporation
= 2.20
15
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
(24)
Power Management and Supported Feature(s):
Active Off/Very Low Power, Standard Default Color Space,
Preferred Timing Mode
Display Type = R/G/B Color
(25-34) CHROMA INFO:
Red X - 0.651 Green X - 0.289 Blue X - 0.141 White X - 0.313
Red Y - 0.336 Green Y - 0.608 Blue Y - 0.087 White Y - 0.329
(35)
ESTABLISHED TIMING I:
720 X 400 @ 70Hz (IBM,VGA)
640 X 480 @ 60Hz (IBM,VGA)
640 X 480 @ 67Hz (Apple,Mac II)
640 X 480 @ 72Hz (VESA)
640 X 480 @ 75Hz (VESA)
800 X 600 @ 56Hz (VESA)
800 X 600 @ 60Hz (VESA)
(36)
ESTABLISHED TIMING II:
800 X 600 @ 72Hz (VESA)
800 X 600 @ 75Hz (VESA)
832 X 624 @ 75Hz (Apple,Mac II)
1024 X 768 @ 60Hz (VESA)
1024 X 768 @ 70Hz (VESA)
1024 X 768 @ 75Hz (VESA)
1280 X 1024 @ 75Hz (VESA)
(37)
Manufacturer's Reserved Timing:
1152 X 870 @ 75Hz (Apple,Mac II)
(38-53) Standard Timing Identification:
1680 X 1050 @75Hz
1600 X 1200 @60Hz
1400 X 1050 @60Hz
1400 X 1050 @75Hz
1280 X 1024 @60Hz
1280 X 960 @60Hz
1152 X 864 @75Hz
1600 X 1200 @75Hz
______________________________________________________________________
(54-71) Detailed Timing / Descriptor Block 1:
1680x1050 Pixel Clock: 146.25 MHz
______________________________________________________________________
Horizontal Image Size: 430 mm
Vertical Image Size: 270 mm
Refreshed Mode: Non-Interlaced
Normal Display - No Stereo
Horizontal:
ViewSonic Corporation
16
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Active Time: 1680 pixels
Blanking Time: 560 pixels
Sync Offset: 104 pixels
Sync Pulse Width: 176 pixels
Border: 0 pixels
Frequency: 65.29 KHz
Vertical:
Active Time: 1050 lines
Blanking Time: 39 lines
Sync Offset: 3 lines
Sync Pulse Width: 6 lines
Border: 0 lines
Frequency: 59.95 Hz
Digital Separate, Horizontal Polarity (-) Vertical Polarity (+)
ViewSonic Corporation
17
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
______________________________________________________________________
(72-89) Detailed Timing / Descriptor Block 2:
Monitor Serial Number:
Q92060100001
______________________________________________________________________
(90-107) Detailed Timing / Descriptor Block 3:
Monitor Range Limits:
Min Vertical Freq - 50 Hz
Max Vertical Freq - 75 Hz
Min Horiz. Freq - 30 KHz
Max Horiz. Freq - 94 KHz
Pixel Clock - 210 MHz
Secondary GTF - Not Supported
______________________________________________________________________
(108-125) Detailed Timing / Descriptor Block 4:
Monitor Name:
VA2012w-2
(126)
No Extension EDID Block(s)
(127)
CheckSum OK
ViewSonic Corporation
18
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
VA2012wb -2 Analog:
______________________________________________________________________
VIEWSONIC CORPORATION
EDID Version # 1,
Revision # 3
DDCTest For: ViewSonic VA2012w-2
______________________________________________________________________
EDID Block 0, Bytes 0-127
128 BYTES OF EDID CODE:
0
1
2
3
4
5
6
7
8
9
________________________________________
0
| 00 FF
FF
FF
FF FF FF 00 5A 63
10
| 1C 6A 01 01 01 01 01 10 01 03
20
| 08 2B 1B 78 2E C3 15 A6 56 4A
30
| 9B 24 16 50 54 BF
40
| A9 40 90 40 90 4F 81 80 81 40
50
| 71 4F A9 4F 21 39 90 30 62 1A
60
| 27 40 68
70
| 00 1C 00 00 00 FF 00
80
| 30 36 30 31 30 30 30 30 31 0A
90
| 00 00 00 FD 00 32 4B 1E 5E 15
100
| 00 0A 20 20 20 20 20 20 00 00
B3 0F
B0 36 00 AE 0E 11 00
110 | 00 FC 00 56
120
EF 80
51 39 33
41 32 30 31 32 77
| 2D 32 0A 20 20 20 00 FE
______________________________________________________________________
(08-09) ID Manufacturer Name ________________
= VSC
(11-10) Product ID Code _____________________
= 6A1C
(12-15) Last 5 Digits of Serial Number ______
= Not Used
(16)
Week of Manufacture _________________ = 01
(17)
Year of Manufacture _________________
(10-17) Complete Serial Number ______________
= 2006
= See Descriptor Block
(18)
EDID Version Number _________________ = 1
(19)
EDID Revision Number ________________
(20)
VIDEO INPUT DEFINITION:
=3
Analog Signal
0.700, 0.300 (1.000 Vp-p)
Separate Syncs
(21)
Maximum Horizontal Image Size ________________
= 430 mm
(22)
Maximum Vertical Image Size __________________
= 270 mm
(23)
Display Gamma ________________________________
(24)
Power Management and Supported Feature(s):
= 2.20
Active Off/Very Low Power, Standard Default Color Space,
Preferred Timing Mode
ViewSonic Corporation
19
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Display Type = R/G/B Color
(25-34) CHROMA INFO:
Red X - 0.651 Green X - 0.289 Blue X - 0.141 White X - 0.313
Red Y - 0.336 Green Y - 0.608 Blue Y - 0.087 White Y - 0.329
(35)
ESTABLISHED TIMING I:
720 X 400 @ 70Hz (IBM,VGA)
640 X 480 @ 60Hz (IBM,VGA)
640 X 480 @ 67Hz (Apple,Mac II)
640 X 480 @ 72Hz (VESA)
640 X 480 @ 75Hz (VESA)
800 X 600 @ 56Hz (VESA)
800 X 600 @ 60Hz (VESA)
(36)
ESTABLISHED TIMING II:
800 X 600 @ 72Hz (VESA)
800 X 600 @ 75Hz (VESA)
832 X 624 @ 75Hz (Apple,Mac II)
1024 X 768 @ 60Hz (VESA)
1024 X 768 @ 70Hz (VESA)
1024 X 768 @ 75Hz (VESA)
1280 X 1024 @ 75Hz (VESA)
(37)
Manufacturer's Reserved Timing:
1152 X 870 @ 75Hz (Apple,Mac II)
(38-53) Standard Timing Identification:
1680 X 1050 @75Hz
1600 X 1200 @60Hz
1400 X 1050 @60Hz
1400 X 1050 @75Hz
1280 X 1024 @60Hz
1280 X 960 @60Hz
1152 X 864 @75Hz
1600 X 1200 @75Hz
______________________________________________________________________
(54-71) Detailed Timing / Descriptor Block 1:
1680x1050 Pixel Clock: 146.25 MHz
______________________________________________________________________
Horizontal Image Size: 430 mm
Vertical Image Size: 270 mm
Refreshed Mode: Non-Interlaced
Normal Display - No Stereo
Horizontal:
Active Time: 1680 pixels
Blanking Time: 560 pixels
Sync Offset: 104 pixels
Sync Pulse Width: 176 pixels
Border: 0 pixels
ViewSonic Corporation
Frequency: 65.29 KHz
20
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Vertical:
Active Time: 1050 lines
Blanking Time: 39 lines
Sync Offset: 3 lines
Sync Pulse Width: 6 lines
Border: 0 lines
Frequency: 59.95 Hz
Digital Separate, Horizontal Polarity (-) Vertical Polarity (+)
______________________________________________________________________
(72-89) Detailed Timing / Descriptor Block 2:
Monitor Serial Number:
Q93060100001
______________________________________________________________________
(90-107) Detailed Timing / Descriptor Block 3:
Monitor Range Limits:
Min Vertical Freq - 50 Hz
Max Vertical Freq - 75 Hz
Min Horiz. Freq - 30 KHz
Max Horiz. Freq - 94 KHz
Pixel Clock - 210 MHz
Secondary GTF - Not Supported
______________________________________________________________________
(108-125) Detailed Timing / Descriptor Block 4:
Monitor Name:
VA2012w-2
(126)
No Extension EDID Block(s)
(127)
CheckSum OK
ViewSonic Corporation
21
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
6. THEORY OF OPERATION
This section describes the function of the LCD monitor per functional block.
This monitor includes MB board, power board, Inverter board and button board.
6.1 MB BOARD
The MB board is a two-layer, single-landed. 12V DC power from the power adapter enters the board through connector CN6.
Other connectors on the board are for audio speaker and button board .The VGA cable is a signal cable that contains video
signal, sync signal and DDC signal from PC VGA adapter. This system board consists of 4 functional areas: flat panel
controller, flash ROM, power regulator and Audio amplifier
6.1.1 Flat panel controller… NT68563HF (IC2)
The heart of the system board is the scalar chip of NT68563HF. The scaler is a highly integrated flat panel display controller
that interfaces analog, digital, and video inputs. It combines a triple ADC, a DVI compliant TMDS receiver, a multi-color on
screen display (OSD) controller and many other functions in a single chip. It provides user a simple, flexible and cost-effective
solution for various flat panel display products.
The NT68563HF operates at frequencies up to 205MHz (analog only), suitable for LCD monitor up to UXGA resolution. The
NT68563HF also build-in noise reduction function to provide more stable video quality, spread spectrum to provide low EMI
solution, sRGB for video color space convert, post pattern for manufacture test.
a)
Clock Generation:
This is the input pair to an internal crystal oscillator and corresponding logic. A 12.000 MHz crystal is
recommended.
b) Hardware Reset (Pin127):
Hardware Reset signal is provided by MCU (IC3), it is active high.
c)
Analog to Digital Converter:
The NT68563HF chip has triple ADC's (analog-to-digital converters), one for each color (red, green and blue) .The
analog RGB and synchronous signals are connected to NT68563 as described below:
Pin Name
Pin Number
Red +
25
Red -
26
Green +
23
Green -
24
Blue +
20
Blue -
21
H sync
39
V sync
40
d) Internal OSD: Internal SRAM allows up to 2048 characters, with programmable OSD frame size. Width is 64 columns,
and Height is 32 row.
ViewSonic Corporation
22
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
e)
On chip TMDS receiver: The NT68563HF integrated TMDS receiver, which operates up to 165MHz and can directly
connect to all DVI compliant TMDS transmitters. The TMDS signals are connected to NT68563HF as described bellow:
Pin Name
Pin NO.
TX0+
9
TX0-
8
TX1+
6
TX1-
5
TX2+
3
TX2-
2
TXC+
11
TXC-
12
6.1.2 Mcu flash ROM
This is an 8031 CPU core embedded micro-controller, which is design for high-performance low-cost LCD monitor control
application. It contains an 8-bit 8031 micro-controller, on-chip 64 K bytes flash-type program ROM, 1,280-bytes internal
data memory, four 7-bit resolution A/D Converter, 10-channel 8-bit resolution PWM DAC, two 16-bit timer/counters, and a
UART.
a) PWM controlling function (Pin 8, Pin 9): The MCU 68F633 has two GPIO to control audio volume and back light
brightness.
b) Serial interface ports pin 25~26(DVI) and pin 27~28(VGA): This serial interface ports communicate with MCU and
support up to 400Kbit per second transmit rate.
6.1.2 Power Regulator AIC1563 (U1), AIC1117 (U3, U4, U5): The AIC1563 is a monolithic control IC containing the
primary functions required for DC-to-DC converters. The device consists of an internal temperature compensated reference,
comparator, controlled duty cycle.
Oscillator with an active current sense circuit, desired output voltage are determined by the equation,
Volt = 1.25 *(1 + R121 / R122), in this case, the output voltage are 5 Volts
AIC1117 (U3, U4, U5): The AIC1117 is a low dropout positive adjustable regulator with minimum of 800mA output current
capability.
So it is well suited for 3.3 V and 2.5 V Regulator.
U5 as a 1.8V regulator, desired output voltage are determined by the equation
Volt=1.25 x (1 + R90/R88) = 1.8
U3 as a 3.3V regulator, desired output voltage are determined by the equation
Volt=1.255 x (1+ R86/R85) = 3.3
U4 as a 3.3V regulator, desired output voltage are determined by the equation
Volt=1.255 x (1+ R89/R87) = 3.3
6.2 Audio Amplifier UTC TDA7496L (U9)
The TDA7496L is a stereo 2W+2W class AB power amplifier; Features of the TDA7496L include linear volume control,
Stand-by and mute functions.
ViewSonic Corporation
23
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
6.3 Inverter Board
This is a specific inverter for VA2012 monitor 40W backlight which converters 20Vdc to drive 6 tubes cold cathode
fluorescent tubes. Electrical specification described as below.
6.3.1 Inverter Electrical specification described as below.
INPUT
OUTPUT
Rated Input Voltage
20Vdc
Input Voltage Range
18.5~21.5Vdc
Input Current
<2A
Off state Input Power
<0.1W
On / off control Voltage
2~5.25 for on, 0~0.2 for off
Rated Output Strike-on Voltage
1500~2000Vrms
Rated Output Voltage
710Vrms at 6mA
Rated Output Frequency
40~50KHz
Rated Output Current
6~7mA
6.4 This is a general purpose AC / DC adapter which converter 90~240 Vac to a stabilized DC voltage 20V for inverter and
12V for system board with rated output current of 4.16A
6.4.1 Power Electrical specification described as below.
INPUT
OUTPUT
ViewSonic Corporation
Rated Input Voltage
90~264Vac, 47~63Hz
Operation Input Voltage
100~240Vac, 50~60Hz
Input Current
<1.5A@90Vac
Inrush Current
<80A @ 230Vac(Cold start)
Output Voltage Regulation
+/-5%
Output Ripple and Noise
300 mVp-p
Rated Output Current
<4.16A
Turn-on Delay
<3 seconds
24
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
5. Adjustment Procedure
1.
Function test
(1) Test equipment
Color video signal and pattern generator (or PC with SXGV resolution)
(2) Test condition
Before function testing and alignment, the unit must warm up for at least 30 minutes under the
following conditions:
1. Room temperature
2. With full-white screen , RGB , black pattern
3. with cycled display modes.
2.
Test display modes
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Timing
640 x 350 @ 70Hz, 31.5kHz
640 x 400 @ 70Hz, 31.5kHz
640 x 480 @ 60Hz, 31.5kHz
640 x 480 @ 67Hz, 35.0kHz
640 x 480 @ 72Hz, 37.9kHz
640 x 480 @ 75Hz, 37.5kHz
720 x 400 @ 70Hz, 31.5kHz
720 x 480i 59.94/60Hz @ 15.7 kHz
720 x 576p 50Hz @ 31.25kHz
720 x 576i 50Hz @ 15.62kHz
800 x 600 @ 56Hz, 35.1kHz
800 x 600 @ 60Hz, 37.9kHz
800 x 600 @ 75Hz, 46.9kHz
800 x 600 @ 72Hz, 48.1kHz
832 x 624 @ 75Hz, 49.7kHz
1024 x 768 @ 60Hz, 48.4kHz
1024 x 768 @ 70Hz, 56.5kHz
1024 x 768 @ 72Hz, 58.1kHz
1024 x 768 @ 75Hz, 60.0kHz
1280x720p 50Hz @ 37.5kHz
1280x 720p @ 60Hz, 45kHz
1280 x 1024 @ 60Hz, 63.4kHz
1280 x 1024 @ 75Hz, 79.97kHz
1600 x 1200 @ 60Hz, 75kHz
1600 x 1200 @ 70Hz, 87.5kkHz
1600 x 1200 @ 75Hz, 93.8kHz
1680 x 1050 @ 60Hz, 65.3 kHz
1680 x 1050 @ 75Hz, 82.3 kHz
1920 x 1080i @ 50Hz, 56.5kHz
1920 x 1080p @ 50Hz, 62.5kHz
ViewSonic Corporation
Analog
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
25
Confidential - Do Not Copy
Digital
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
VA2012w-2_VA2012wb-2
3.
Test pattern
Item
1
Test condition
Frequency & performance
Pattern
Cross-hatch pattern
2
Monitor saturation
16-gray scale pattern
3
RGB color performance
RGB color
4
Sub-pixel defect
RGB color
5
Full white
Full white
6
7.
8.
Full black
5-cycle pattern
1-dot pattern
Full black
5-cycle pattern
1-dot pattern
ViewSonic Corporation
Specification
No noise is allowed, all colors must
be clear
3 to 4 levels must be saturated when
brightness and contrast are set to
100%
Check the color temperature of
RGB signal color
Check the sub-pixel defect
Check the brightness and contrast
ratio, and check for bright pixel
defects
Remark
Pattern 1
Pattern 2
Pattern 3,
4, 5
Pattern 3,
4,5
Pattern 6
Pattern 7
Pattern 8
Pattern 9
Check the BU
Check the flicker
Pattern 1
Pattern2
Pattern 3
Pattern4
26
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Pattern 5
Pattern6
Pattern 7
Pattern 8
Pattern 9
ViewSonic Corporation
27
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
OSD Function Menu
A. When in Analog Input Mode
1. Main Menu
Press the [1] (Menu) button to enter the Main Menu:
Press the [▲] button to highlight the previous item or the [▼] button to highlight
the next item.
Press the [1] (Menu) button to exit the Main Menu.
(1) Auto Image Adjust Page:
Press the [2] button to execute the auto image adjust function.
Press the [1] button to exit the page.
(2) Contrast/Brightness Page:
Press the [2] button to enter the contrast adjustment page.
Press the [1] button to exit the page.
1) Contrast Item
Press the [▲] button to increase the contrast.
Press the [▼] button to decrease the contrast.
Press the [2] button to enter the brightness adjustment page.
Press the [1] button to exit the page.
2) Brightness Item
Press the [▲] button to increase the brightness.
Press the [▼] button to decrease the brightness.
Press the [2] button to enter the contrast adjustment page.
Press the [1] button to exit the page.
(3) Input Select Page:
Press the [2] button to switch to digital input mode.
(4) Audio Adjust Page:
Press the [▲] button to increase the volume.
Press the [▼] button to decrease the volume.
Press the [2] button to enable or disable mute function .
Press the [1] button to exit the page.
(5) Color Adjust Page:
Press the [2] button to enter the color adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
1) sRGB Item
2) 9300K Item
3) 6500K Item
4) 5400K Item
Press the [2] button to select the currently highlighted item.
Press the [1] button to exit the currently highlighted item.
5) User Color Item
Press the [2] button to enter the user color page.
Press the [1] button to exit the page.
ViewSonic Corporation
28
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Red, Green, Blue Options:
Press the [2] button to cycle among the colors.
Press the [1] button to exit the page.
Press the [▲] button to increase the selected color level.
Press the [▼] button to decrease the selected color level.
(6) Information Page:
Press the [2] button to enter the information page.
Press the [1] button to exit the information page.
(7) Manual Image Adjust Page:
Press the [2] button to enter the manual image adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
1) H./V. Position Item
Press the [2] button to enter the horizontal/vertical postion adjustment page.
Press the [1] button to exit the page.
a) Horizontal Position:
Press the [2] button to enter the vertical position adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to shift the image to the right.
Press the [▼] button to shift the image to the left.
b) Vertical Position:
Press the [2] button to return to the horizontal position adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to shift the image upward.
Press the [▼] button to shift the image downward.
2) Horizontal Size Item
Press the [2] button to enter the horizontal size adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to make the image wider.
Press the [▼] button to make the image narrower.
3) Fine tune Item
Press the [2] button to enter the fine tuning page.
Press the [1] button to exit the page.
Press “[▲]” Button to adjust character position in one direction.
Press “[▼]“Button to adjust character position in the other direction.
4) Sharpness Item
Press the [2] button to enter the sharpness adjustment page.
Press the [1] button to exit the page.
Press “[▲]” Button to increase image sharpness.
Press “[▼]“ Button to decrease image sharpness.
(8) Setup Menu Page:
Press the [2] button to enter the setup menu page.
ViewSonic Corporation
29
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
1) Language Select Item
Press the [2] button to enter the language selection page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
English, French… Option
Press the [2] button to select the language.
Press the [1] button to exit the page.
2) Resolution Notice Item
Press the [2] button to enter the resolution notice page.
Press the [1] button to exit the page.
Enable, Disable Option
Press the [2] button to select the highlighted option.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous option or the [▼] button
to highlight the next option.
3) OSD Position Item
Press the [2] button to enter the OSD position adjustment page.
Press the [1] button to exit the page.
a) Horizontal Position Option
Press the [2] button to enter the vertical position adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to shift the menu to the right.
Press the [▼] button to shift the menu to the left.
b) Vertical Position Option:
Press the [2] button to enter the horizontal position adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to shift the menu upward.
Press the [▼] button to shift the menu downward.
4) OSD Time Out Item
Press the [2] button to enter the OSD time out adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to increase the OSD time out.
Press the [▼] button to decrease the OSD time out.
5) OSD Background Item
Press the [2] button to enter the OSD background selection page.
Press the [1] button to exit the page.
Enable, Disable Option
Press the [▲] button to highlight the previous option or the [▼] button
to highlight the next option.
Press the [2] button to select the highlighted option.
Press the [1] button to exit the page.
ViewSonic Corporation
30
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
(9) Memory Recall Page
Press the [2] button to execute the memory recall function.
Press the [1] button to exit the page.
2. Other Menu:
This “shortcut” menu is directly accessible without bringing up the OSD.
(1) Contrast Dialog
Press the [▲] or [▼] button to enter the Contrast Dialog.
Press the [1] button to exit the Contrast Dialog.
Press the [2] button to enter the Brightness Dialog.
Press the [▲] button to increase the contrast.
Press the [▼] button to decrease the contrast.
(2) Brightness Dialog
Press the [▲] or [▼] button to enter the Brightness Dialog.
Press the [1] button to exit the Brightness Dialog.
Press the [2] button to enter the Contrast Dialog.
Press the [▲] button to increase the brightness.
Press the [▼] button to decrease the brightness.
(3) Analog/Digital Dialog
Press the [2] button to toggle between analog and digital modes.
B. When in Digital Input Mode
1.
Main Menu
Press the [1] (Menu) button to enter the Main Menu:
Press the [▲] button to highlight the previous item or the [▼] button to highlight
the next item.
Press the [1] (Menu) button to exit the Main Menu.
(1) Auto Image Adjust Page:
Press the [2] button to execute the auto image adjust function.
Press the [1] button to exit the page.
(2) Contrast/Brightness Page:
Press the [2] button to enter the contrast adjustment page.
Press the [1] button to exit the page.
1) Contrast Item
Press the [▲] button to increase the contrast.
Press the [▼] button to decrease the contrast.
Press the [2] button to enter the brightness adjustment page.
Press the [1] button to exit the page.
2) Brightness Item
Press the [▲] button to increase the brightness.
Press the [▼] button to decrease the brightness.
Press the [2] button to enter the contrast adjustment page.
Press the [1] button to exit the page.
ViewSonic Corporation
31
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
(3) Input Select Page:
Press the [2] button to switch to analog input mode.
(4) Audio Adjust Page:
Press the [▲] button to increase the volume.
Press the [▼] button to decrease the volume.
Press the [2] button to enable or disable mute function .
Press the [1] button to exit the page.
(4) Color Adjust Page:
Press the [2] button to enter the color adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
1) sRGB Item
2) 9300K Item
3) 6500K Item
4) 5400K Item
Press the [2] button to select the currently highlighted item.
Press the [1] button to exit the currently highlighted item.
5) User Color Item
Press the [2] button to enter the user color page.
Press the [1] button to exit the page.
Red, Green, Blue Options:
Press the [2] button to cycle among the colors.
Press the [1] button to exit the page.
Press the [▲] button to increase the selected color level.
Press the [▼] button to decrease the selected color level.
(5) Information Page:
Press the [2] button to enter the information page.
Press the [1] button to exit the information page.
(6) Manual Image Adjust Page:
Press the [2] button to enter the manual image adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
1) Sharpness Item
Press the [2] button to enter the sharpness adjustment page.
Press the [1] button to exit the page.
Press “[▲]” Button to increase image sharpness.
Press “[▼]“ Button to decrease image sharpness.
(7) Setup Menu Page:
Press the [2] button to enter the setup menu page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
ViewSonic Corporation
32
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
1) Language Select Item
Press the [2] button to enter the language selection page.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous item or the [▼] button to
highlight the next item.
English, French… Option
Press the [2] button to select the language.
Press the [1] button to exit the page.
2) Resolution Notice Item
Press the [2] button to enter the resolution notice page.
Press the [1] button to exit the page.
Enable, Disable Option
Press the [2] button to select the highlighted option.
Press the [1] button to exit the page.
Press the [▲] button to highlight the previous option or the [▼] button
to highlight the next option.
3) OSD Position Item
Press the [2] button to enter the OSD position adjustment page.
Press the [1] button to exit the page.
a) Horizontal Position Option
Press the [2] button to enter the vertical position adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to shift the menu to the right.
Press the [▼] button to shift the menu to the left.
b) Vertical Position Option:
Press the [2] button to enter the horizontal position adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to shift the menu upward.
Press the [▼] button to shift the menu downward.
4) OSD Time Out Item
Press the [2] button to enter the OSD time out adjustment page.
Press the [1] button to exit the page.
Press the [▲] button to increase the OSD time out.
Press the [▼] button to decrease the OSD time out.
5) OSD Background Item
Press the [2] button to enter the OSD background selection page.
Press the [1] button to exit the page.
Enable, Disable Option
Press the [▲] button to highlight the previous option or the [▼] button
to highlight the next option.
Press the [2] button to select the highlighted option.
Press the [1] button to exit the page.
(8) Memory Recall Page
Press the [2] button to execute the memory recall function.
ViewSonic Corporation
33
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Press the [1] button to exit the page.
2.
Other Menu:
This “shortcut” menu is directly accessible without bringing up the OSD.
(1) Contrast Dialog
Press the [▲] or [▼] button to enter the Contrast Dialog.
Press the [1] button to exit the Contrast Dialog.
Press the [2] button to enter the Brightness Dialog.
Press the [▲] button to increase the contrast.
Press the [▼] button to decrease the contrast.
(2) Brightness Dialog
Press the [▲] or [▼] button to enter the Brightness Dialog.
Press the [1] button to exit the Brightness Dialog.
Press the [2] button to enter the Contrast Dialog.
Press the [▲] button to increase the brightness.
Press the [▼] button to decrease the brightness.
(3) Analog/Digital Dialog
Press the [2] button to toggle between analog and digital modes.
C. Other Information
When the “No Signal” or “Out of Range” messages appear:
If no input signal is detected, the “No Signal” message will appear in the center of
the screen.
If the V-Sync signal rate is greater than than 85Hz or its resolution is greater than
SXGA, the “Out of Range” message will appear in the center of the screen.
Activating Factory Mode and Burn Mode:
While the device is in standby, press the [2] button, then press the power button to
enter Factory Mode. While Factory Mode is active, an additional menu page titled
“Factory Menu” will be accessible. Press the [2] button to enter the Factory Menu
page, then press the [2] button to enter Burn Mode.
When Installing a New Main Board
1. Enter Factory Mode.
2. Use a PC or chrom to send a 32-tone gray scale signal to the monitor.
3. Select “Auto Color”
ViewSonic Corporation
34
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Firmware updates procedure:
When you received a received monitor , please check whether the firmware version.
procedure to upgrade to the latest version .
If not , please following
1. Equipment needed :
- VA2012w/b
- PC ( Personal computer )
- LPT cable
- Fixture (LM5ISP)
- Firmware upgrade program
ViewSonic Corporation
35
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
2. Connection :
To PC
To Monitor
Appendix A : How to install the software for ISP :
0. To setup ISP environment :
Hardware:
PC or notebook, parallel(printer) cable, ISP tooling.
Software:
If OS was Win2000 or WinXP , please install “PORT95NT.exe”
In order to ensure can execute ISP program, please set BIOS in PC or Notebook as Fig 0.0
Fig 0.0
ViewSonic Corporation
36
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
0.1 Double-click the “ PORT95NT.exe” in Windows & install the program. , see Fig 0.1
Fig 0.1
0.2 Keep on press “ Next “ 4 times to go through the installation processes, see Fig. 0.2
Fig. 0.2
ViewSonic Corporation
37
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
0.3 Choose “ Typical “ then press “ Next “ , see Fig. 0.3
Fig. 0.3
0.4 Keep on press “ Next “ 4 times to go through the installation processes, see Fig. 0.4
Fig. 0.4
ViewSonic Corporation
38
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
0.5 Install completed , restart the PC or notebook. See Fig 0.5
Fig. 0.5
1. Install ISP
1.1 User could download ISP driver and PORT95NT install from Myson Century website (www.myson.com.tw )
1.2 After extracting the ZIP file , the total files list as Fig 1.0 , and double click the file of setup.exe to install.
Fig 1.0
ViewSonic Corporation
39
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
1.3 Press “ Next “ button to continue., see Fig 1.1
Fig 1.1
1.4 Keep default setting or press “ Change “ button for selecting
“ button to continue , see Fig 1.2
the path that you want , and then press “ Next
Fig 1.2
ViewSonic Corporation
40
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
1.5 Press “ Install “ button to continue , see Fig 1.3
Fig. 1.3
1.6 Installation has finished , press “ Finish “ button , see Fig 1.4
Fig. 1.4
ViewSonic Corporation
41
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Appendix B : How to use software to upgrade the BIOS :
2.1 After installation , we could find the shortcut in the setting path or the program bar ( default setting ) , see Fig 2.1
Fig. 2.1
2.2 Security file is a key to use ISP function , press “ OK “ button , see Fig 2.2
Fig. 2.2
2.3 The warning is used to remind user of that different CPU rate may cause ISP function fail. (it’s limited by IIC
protocol ) , press “ OK “ button , see Fig 2.3
Fig. 2.3
ViewSonic Corporation
42
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
2.4 Press “ Create Security File “ button to key in Security code . Adjusting bar to decrease speed of IIC bus ,
See Fig. 2.4 .
Fig. 2.4
2.5 Fig 2.5 shows the setting for security code of software ISP . it needs 2 command No. and key in command
sequentially for 7C , 4C , 77. The command No. and command must be set by user while coding. About the detailed
of setting , please refer to section 6 boot code of ISP .
Fig. 2.5
ViewSonic Corporation
43
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Appendix C : Use ISP to program MCU
3.1
Select MTV type first , load the binary or intel hex file that you want to program into the MCU , and select
“ AUTO” item , then press “ RUN “ button , see fig3.1
Fig. 3.1
3.2
3.3
If user change the MTV type , it must load file again , or the buffer of load file will be cleared .
CRC ( cyclic redundancy check ) : the host can check CRC register’s result instead of reading every byte
in flash. The message of Check MCU CRC OK means that the host verify OK for the progress of
program , see Fig.3.2
Fig. 3.2
ViewSonic Corporation
44
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
dis-assembly procedure
take out LCD(1)
put lcd on the desk with sponge(2)
unlade I/o cover(3)
unlock stand screw(4)
Open back cover(5)
tear off AL FOIL(6)
ViewSonic Corporation
45
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
pull out CCFT CABLE(7)
unlock shielding screw(8)
tear off yellow tape and pull out lvds cable(9)
tear off yellow tape(10)
unlock button/b screw(11)
pull out button/b cable from button/b connector(12)
ViewSonic Corporation
46
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
unlade speaker (13)
take down shielding(14)
tear off AL FOIL(15)
tear off mylar and rubber(16)
unlock bezel screw(17)
ViewSonic Corporation
unlock bkt L/R screw(18)
47
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
unlock pcb'a screw and reclaim mylar(19)
take out pcb'a(20)
pull out cable from pcb'a(21)
ViewSonic Corporation
48
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Packing for shipping procedure
packing method
(1) stick lcd film
(4) put lcd in carton
stick
1-1
1-2
Front of PANEL
(2) cover PE BAG
(5) put cable&base&manual&assemble handle
handle
manual
VGA&DVI
CABLE
manual
VGA&DVI
CABLE
(3) assemble END CAP R/L
base
(6) accessories check&cover carton
ViewSonic Corporation
49
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
6. Troubleshooting Flow Chart
No Power
No Power
Check CN6 pin 1,2
Change power
12V correct?
board
Check U4,U3 pin2
Change U3,U4
3.3V correct?
Check U5 pin 2
Change U5
1.8V correct?
Check Y1
Change Y1
frequency 12MHz
Change M/B
ViewSonic Corporation
50
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
No Audio
No Audio Output
OK
NO
Check input signal
J1 OK?
Check input source
or change J1
OK
Check CN7 to
NO
Change speaker
NO
Change power
board module
NO
Change Q7
NO
Change U6
speaker OK?
OK
Check CN6 pin 1,2
12V correct?
OK
Check U6 pin 6
Volume and Q7
OK
Check U6
pin12(mute),p11(stby)
OK
Change M/B
ViewSonic Corporation
51
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Display color abnormal
Display color abnormal
NO
Check panel cable?
Change panel cable
OK
NO
Check open/short
of IC2?
Repair open/short
OK
NO
Check panel power
supply of Q4
Change Q4
OK
NO
Check panel
Change panel
OK
Change M/B
ViewSonic Corporation
52
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
7. Recommended Spare Parts List
RECOMMENDED SPARE PARTS LIST (VA2012w-2)
ViewSonic Model Number: VS10859
Serial No. Prefix: Q92
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
Accessories:
PC Board Assembly:
Cabinets:
Cables:
Documentation:
Electronic
Components:
Hardware:
Miscellaneous:
Packing Material:
Plastics:
Rev: 1a
Description
POWER CORD SP-305+IS-14 3P 1.8M(TWN)B GP
W0VA BUTTON/B ASSY GP
PWR MODULE(DTA)EADP-64CF B,90~264V GP
INV MODULE(SEL)W0E(20V,I=6MA) GP
PWR MODULE(DTA)EADP-64CF BA,90~264V GP
W0VA-2 M/B SPARE PART(68563H,NDVI,AU)GP
W0VA BASE SUB ASSY (S/B) GP
W0VA LCD BEZEL SUB ASSY (S/B) GP
HINGE COVER W0VA(EBW0VA03,R3A)BK GP
W0VA LCD COVER ASSY(NO DVI,S/B) GP
CABLE MB-VGA (15/15P,1.8M)L7VD GP
CABLE MB-BUTTON(11P/11P,240MM)W0VA GP
CABLE MB-INV(7P/8P,320MM)W0E GP
CABLE LVDS(30P,140MM,LINKTEC,AU)L9VA GP
CABLE AUDIO(ST,1.8M)BLACK W9ZA GP
CD+QSG(AU_V0) W0VA-2(HGW0VA03,REV3A)GP
SPEAK ASSY L9T FG-TE130 1.5W*2 GP
LCD(TFT) 20"M201EW01 V0(WSXGA/8MS) GP
IO NUT LI1(MBLI1004,REV3A)GP
SCREW F3.0*6-B(NI)GP
SCREW M3.0*4.0-I(NI) GP
RUBBER PLUG VESA
END CAP(L) W0VA(HBW0VA01,REV3A) GP
END CAP(R) W0VA(HBW0VA02,REV3A) GP
CRAFT CARTON(S) W0VA-2A(HFW0VA08,REV3A) GP
GENERIC FOAM SET
GENERIC BOX
EPE BAG L7VX(HAL7V002,REV3A) GP
W0VA STAND ASSY (S/B) GP
ECR/ECN
ViewSonicP/N
A-00003642
B-00004142
B-00004145
B-00005205
B-00006115
B-00006116
C-00004147
C-00004148
C-00006104
C-00006117
CB-00002602
CB-00004150
CB-00004151
CB-00004152
CB-00005211
DC-00006118
E-00004155
E-00005214
M-MS-0808-8986
M-SCW-0824-0813
M-SCW-0824-6802
M-MS-0808-9815
P-00004161
P-00004162
P-00006119
P-00001347
P-00002515
M-MS-0808-9158
PL-00004163
Ref. P/N
DM33T181004
1SW0VABB003
AS08B532009
AS023360D18
AS08B532017
1SW0VABB033
38W0VABS010
34W0VALB018
EBW0VA03020
25W0VALC031
DDL7VDPC005
DDW0VABU007
DD0W0EIV008
DD0L9VLC023
DDW9ZAPA009
HGW0VA03016
DN0TE130F01
AAM201EW007
MBLI1004018
MF30060BBJ6
MM30040IBJ9
GAL9V002014
HBW0VA01019
HBW0VA02015
HFW0VA08017
30833
20653
HAL7V002019
26W0VASA016
Location
Power cable
button board
power board
INV board
power board
main board
base
front bezel
HINGE COVER
back cover
VGA cable
Button-MB cable
MB-INV cable
MB-LCD cable
Audio cable
CD+QSG
speaker assy
LCD panel
D-SUB to shielding
PCBAs to metal shielding
panel to L/R bracket
RUBBER PLUG
cushion
cushion
carton
Universal number#
EPE bag
STAND
Q'ty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
10
4
1
1
1
1
1
1
Remark 1: Above listed items are examples, supplier can expand the rows to add more necessary items.
Remark 2: All revised RSPLs with newly added items or any change made should be highlighted and correlated with the ECN/ECR approved by ViewSonic Corporation. This is to eliminate
repeated cross checks of each item between this version and prior versions.
RECOMMENDED SPARE PARTS LIST (VA2012wb-2)
ViewSonic Model Number: VS10859
Serial No. Prefix: Q93
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
Accessories:
PC Board
Assembly:
Cabinets:
W0VA BASE SUB ASSY GP
W0VA LCD BEZEL SUB ASSY GP
HINGE COVER W0VA(EBW0VA03,REV3A)GP
W0VA LCD COVER ASSY(NO DVI) GP
CABLE MB-VGA (15/15P,1.8M)L7VD GP
CABLE MB-BUTTON(11P/11P,240MM)W0VA GP
CABLE MB-INV(7P/8P,320MM)W0E GP
CABLE LVDS(30P,140MM,LINKTEC,AU)L9VA GP
Cables:
Documentation:
Electronic
Components:
Hardware:
Miscellaneous:
Packing Material:
Plastics:
Description
POWER CORD SP-305+IS-14 3P 1.8M(TWN)B GP
W0VA BUTTON/B ASSY GP
PWR MODULE(DTA)EADP-64CF B,90~264V GP
INV MODULE(SEL)W0E(20V,I=6MA) GP
PWR MODULE(DTA)EADP-64CF BA,90~264V GP
MAIN BOARD W0VA-2 (68563H,NDVI,AU)GP
CABLE AUDIO(ST,1.8M)BLACK W9ZA GP
CD+QSG(AU_V0) W0VA-2(HGW0VA03,REV3A)GP
SPEAK ASSY L9T FG-TE130 1.5W*2 GP
LCD(TFT) 20"M201EW01 V0(WSXGA/8MS) GP
IO NUT LI1(MBLI1004,REV3A)GP
SCREW F3.0*6-B(NI)GP
SCREW M3.0*4.0-I(NI) GP
RUBBER PLUG VESA
PE BAG L0T(HAL0T002,REV3A)GP
END CAP(L) W0VA(HBW0VA01,REV3A) GP
END CAP(R) W0VA(HBW0VA02,REV3A) GP
GENERIC FOAM SET
GENERIC BOX
CARTON(B) W0VA-2A(HFW0VA09,REV3A) GP
W0VA STAND ASSY GP
Rev: 1a
ECR/ECN
ViewSonic P/N
A-00003642
B-00004142
B-00004145
B-00005205
B-00006115
B-00006120
C-00004165
C-00004166
C-00005750
C-00006121
CB-00002602
CB-00004150
CB-00004151
CB-00004152
CB-00005211
DC-00006118
E-00004155
E-00005214
M-MS-0808-8986
M-SCW-0824-0813
M-SCW-0824-6802
M-MS-0808-9815
P-00004159
P-00004161
P-00004162
P-00001347
P-00002515
P-00006122
PL-00004168
Ref. P/N
DM33T181004
1SW0VABB003
AS08B532009
AS023360D18
AS08B532017
1SW0VABB033
38W0VABS001
34W0VALB000
EBW0VA03011
25W0VALC023
DDL7VDPC005
DDW0VABU007
DD0W0EIV008
DD0L9VLC023
DDW9ZAPA009
HGW0VA03016
DN0TE130F01
AAM201EW007
MBLI1004018
MF30060BBJ6
MM30040IBJ9
GAL9V002014
Location
Power cable
button board
power board
INV board
power board
main board
Universal number#
front bezel
back cover
VGA cable
Button-MB cable
MB-INV cable
MB-LCD cable
Audio cable
CD+QSG
speaker assy
LCD panel
D-SUB to shielding
PCBAs to metal shielding
panel to L/R bracket
RUBBER PLUG
HAL0T002019
HBW0VA01019
HBW0VA02015
30833
20653
HFW0VA09013
26W0VASA008
Q'ty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
10
4
1
1
1
1
1
1
Remark 1: Above listed items are examples, supplier can expand the rows to add more necessary items.
Remark 2: All revised RSPLs with newly added items or any change made should be highlighted and correlated with the ECN/ECR approved by ViewSonic Corporation.
This is to eliminate repeated cross checks of each item between this version and prior versions.
ViewSonic Corporation
53
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
BOM LIST (VA2012w-2)
ViewSonic Model Number: VS10859
Rev: 1a
Serial No. Prefix: Q92
Item
1
2
3
4
5
6
7
8
9
10
11
ViewSonic P/N
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
12
N/A
CC73303MD69
CAP ELEC DIP 330U 16V(+-20%,105C,8*9) GP
13
14
15
16
17
18
19
20
21
22
N/A
N/A
N/A
N/A
N/A
N/A
B-00004142
N/A
N/A
N/A
CC810T1MD05
BG612000202
DFTJ05FR037
DC04725K011
AL007496D02
AL007496D29
23W0VABB009
DAW0VATB218
BEYG0014DA0
DFHD11MR001
CAP EC 1000U6.3V(+-20%,105C,8*11.5) GP
XTAL DIP 12MHZ(+-30PPM,HC-49/S TYPE) GP
CONN DIP PHONE JACK 5P FR(J303-1-A-G+)GP
CHOKE COIL 47UH(2.5A,+-10%,T07473 GP) GP
IC(20P) TDA7496L(DIP) GP
IC(20P) UTC TDA7496LK(DIP) GP
W0VA BUTTON/B ASSY GP
PCB(BUTTON)TB(2L,242*12,REVA)W0VA GP
LED(DIP) YELLOW/GREEN(L-3WYGW-F01) GP
CONN DIP HEADER 11P 1R MR(P2.0,H4.1) GP
23
PL-BT-0706-0127
DHP0002B108
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
Ref. P/N
1LW0VAXVSU5
21W0VAMB011
31W0VASS016
DFDS15FR041
DFDS15FR076
DFHD11MR001
DFHD30MR267
DFHD08FR102
DFHD04MR132
CC647T1MD05
CC71004MD09
Description
W0VA-2 LCD MONITOR(VA2012W-2)S/B,EU GP
W0VA M/B ASSY (NT68563H,W/O DVI) GP
W0VA M/B S/S ASSY (NT68563H,W/O DVI) GP
CONN D-SUB 15P 3R FR(P1.15,H12.55) GP
CONN D-SUB 15P 3R FR(P1.15,H12.55) GP
CONN DIP HEADER 11P 1R MR(P2.0,H4.1) GP
CONN DIP HEADER 30P 2R MR(P2.0,H4.0) GP
CONN DIP HEADER 8P 2R FR(P2.54,H5.0) GP
CONN DIP HEADER 4P 1R MR(P2.0,H4.1) GP
CAP EC 47U 10V(+-20%,105C,5*11,2000H)GP
CAP ELEC DIP 100U 25V(+-20%,105C,6*7) GP
Location
CN1
CN1
CN3
CN4
CN6
CN7
C36
C68,C69,C70,C71
C30,C46,C53,C66,C67,
C74,C76,C80,C82
C60
Y1
J1
L14
U6
U6
SWITCH PUSH BUTTON(PT-002-B1,50MA,12V)GP
LED1
CN1
SW1,SW2,SW3,SW4,S
W5,SW6,SW7,SW8
B-00004145
AS08B532009
PWR MODULE(DTA)EADP-64CF B,90~264V GP
B-00005205
AS023360D18
INV MODULE(SEL)W0E(20V,I=6MA) GP
N/A
24W0VALB034 W0VA LCD BEZEL ASSY (NO DVI,S/B) GP
C-00004148
34W0VALB018 W0VA LCD BEZEL SUB ASSY (S/B) GP
N/A
36W0VAPS014 W0VA PCB SHIELDING ASSY(NO DVI)GP
N/A
FAW0VA02014 LCD BKT-L W0VA(FAW0VA02,REV3A)GP
N/A
FAW0VA03011 LCD BKT-R W0VA(FAW0VA03,REV3A)GP
N/A
GBL9C001016
PANEL SPONGE L9C(GBL9C001,REV3A)GP
N/A
FCL70007019
MYLAR SCALAR/LCD L70L-A(FCL70007,R3A)GP
N/A
FCM7T004014 AL FOIL M7T(FCM7T004,REV3A) GP
M-SCW-0824-6761 MM30030IBJ4 SCREW M3*3-I-NI GP
N/A
MF30040BJB9
SCREW F3.0*4.0-B(BNI)GP
M-SCW-0824-0813 MF30060BBJ6
SCREW F3.0*6-B(NI)GP
M-MS-0808-8986
MBLI1004018
IO NUT LI1(MBLI1004,REV3A)GP
M-SCW-0824-0814 MM30060BBJ3 SCREW M3.0*6,B(NI) GP
N/A
MS35080B456
SCREW F3.5*8-B(NI)(WASHER)GP
N/A
FCL7TA03011 AL-(50*25) L7TA(FCL7TA03,REV3B)GP
CB-00002525
DD0L9VLC015 CABLE MB-LCD(30P,140MM)L9V-5 GP
CB-00004152
DD0L9VLC023 CABLE LVDS(30P,140MM,LINKTEC,AU)L9VA GP
CB-00004150
DDW0VABU007 CABLE MB-BUTTON(11P/11P,240MM)W0VA GP
CB-00004151
DD0W0EIV008 CABLE MB-INV(7P/8P,320MM)W0E GP
E-00004155
DN0TE130F01 SPEAK ASSY L9T FG-TE130 1.5W*2 GP
M-SCW-0824-6802 MM30040IBJ9 SCREW M3.0*4.0-I(NI) GP
M-SCW-0824-0726 MF30080BBJ5
SCREW F3.0*8L,B,NI GP
N/A
ME26060BJ21
SCREW M2.6*6.0-B(BNI) GP
N/A
FCW0VA02016 POWER MYLAR-DOWN W0VA(FCW0VA02,REV3B) GP
N/A
FCW0VA03012 INVETER MYLAR-DOWN W0VA(FCW0VA03,R3B) GP
C-00006117
25W0VALC031 W0VA LCD COVER ASSY(NO DVI,S/B) GP
N/A
25W0VA03
LCD COVER ASSY(NO DVI,S/B)
N/A
EAW0VA06028 LCD COVER(W/DVI,S/B)W0VA(EAW0VA06,R3A)GP
M-MS-0808-9411
FBL70008014
LOCK METAL L70B(FBL70008,REV3A) GP
C-00005442
FBW0VA01019 HINGE-PLATE W0VA(FBW0VA01,REV3A)GP
PL-00004163
26W0VASA016 W0VA STAND ASSY (S/B) GP
N/A
EAW0VA03029 STAND FRONT W0VA(EAW0VA03,R3A)BK GP
N/A
EAW0VA05021 STAND-BACK W0VA(EAW0VA05,R3A)BK GP
N/A
FAW0VA04017 HINGE ASSY W0VA(FAW0VA04,REV3A)GP
N/A
FBW0VA02015 CONTACT-PLATE W0VA(FBW0VA02,REV3A)GP
HW-00004157
MF40140IJ29
SCREW F4.0*14-I(BNI) GP
N/A
DDL9TATH107 CABLE STAND-HINGE(1P,150MM)L7TA GP
M-SCW-0824-6895
MF40080IBJ1
SCREW F4.0*8-I(NI)GP
N/A
27W0VACS014 W0VA CHASSIS ASSY S/B GP
C-00006104
EBW0VA03020 HINGE COVER W0VA(EBW0VA03,R3A)BK GP
M-MS-0808-9815
GAL9V002014 RUBBER PLUG VESA L9V(GAL9V002,REV3A)GP
N/A
ME40200PJ28
SCREW T4.0*20.0-P(BNI) GP
N/A
MM40100BL61 SCREW M4*10.0-B(BNI,NYLOK) GP
N/A
2AW0VAPTA13 W0VA-2 PANEL DEPENDENT KIT ASSY(AUO) GP
E-00005214
AAM201EW007 LCD(TFT)20" M201EW01 V.0 GP
E-00006103
AAM201EW058 LCD 20" M201EW01 V.0 FOR VSC CON GP
N/A
AZW0VABA004 W0VA-2 SW BIOS(NOVATEK,W/AUDIO)FOR AUO
N/A
FBW0VA05014 PANEL HOOK W0VA(FBW0VA05,REV3A)GP
N/A
HGW0VA07011 CD+QSG(AU_V03) W0VA-2A(HGW0VA07,REV3A)GP
N/A
2AW0VAPTQ10 W0VA-2 PANEL DEPENDENT KIT ASSY(QDI)GP
E-00004154
AA20AL01004 LCD(TFT) 20" QD20AL01 REV.01 GP
N/A
AZW0VABQ006 W0VA-2 SW BIOS(NOVATEK,W/AUDIO)FOR QDI
N/A
FBW0VA04018 PANEL HOOK W0VA(FBW0VA04,REV3A) GP
ViewSonic Corporation
54
Confidential - Do Not Copy
Universal number#
Q'ty
1
1
1
1
1
1
1
1
1
4
9
1
1
1
1
1
1
1
1
1
1
8
1
1
1
1
1
1
1
1
1
2
6
4
10
2
1
1
2
1
1
1
1
1
4
2
3
1
2
1
0
1
1
1
1
1
1
1
1
7
1
1
1
1
4
2
4
1
1
1
1
2
1
1
1
1
2
VA2012w-2_VA2012wb-2
Item
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
ViewSonic P/N
DC-00006118
PL-00001806
N/A
C-00004147
CB-00002602
CB-00005211
M-MS-0808-9158
P-00004161
P-00004162
M-LB-0813-0747
N/A
M-LB-0813-0745
M-LB-0813-0746
N/A
N/A
PL-00005198
M-00004158
M-LB-0813-1043
N/A
N/A
A-PC-0106-0227
Ref. P/N
HGW0VA03016
GAL5T001016
28W0VAPK046
38W0VABS010
DDL7VDPC005
DDW9ZAPA009
HAL7V002019
HBW0VA01019
HBW0VA02015
HCL7V004013
HCW0VA02016
HCL7V002011
HCL7V003017
HFW0VA04011
HDW0VX01010
JXLM5003011
JXW0ZB01019
HCL70021011
HFL5V003014
HCL7VC05013
DM333181801
ViewSonic Corporation
Description
CD+QSG(VA2012W-2) W0VA-2(HGW0VA03,R3A)GP
RUBBER-HOLDER L5TL-E(GAL5T001,REV3B)GP
W0VA-2(VA2012W-2) PACKING ASSY(S/B)GP
W0VA BASE SUB ASSY (S/B) GP
CABLE MB-VGA (15/15P,1.8M)L7VD GP
CABLE AUDIO(ST,1.8M)BLACK W9ZA GP
EPE BAG L7VX(HAL7V002,REV3A) GP
END CAP(L) W0VA(HBW0VA01,REV3A) GP
END CAP(R) W0VA(HBW0VA02,REV3A) GP
CORE LABEL(HCL7V004,REV3A)GP
ID LABEL(S) W0VA(HCW0VA02,REV3A) GP
SERIAL LEBAL L7V(HCL7V002,REV3A) GP
CARTON LEBAL(HCL7V003,REV3A)GP
CARTON(S) W0VA-2(HFW0VA04,REV3A) GP
ENERGY STAR NOTICE W0VX(HDW0VX01,R3A)GP
HANDLE LM5S(JXLM5003,REV 3B) GP
LCD FILM W0ZB-A1(JXW0ZB01,REV3A)GP
HI-POT LABEL L70L(HCL70021,REV3A)GP
SPACE PLATE L5VC(HFL5V003,REV3A)GP
ADDRESS LABEL L7VC (HCL7VC05,REV3A)GP
POWER CORD SP-023+IS-14 1.8M(B)EU GP
Location
55
Confidential - Do Not Copy
Universal number#
Q'ty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0.042
1
1
VA2012w-2_VA2012wb-2
BOM LIST (VA2012wb-2)
ViewSonic Model Number: VS10859
Rev: 1a
Serial No. Prefix: Q93
Item
1
2
3
4
5
6
7
8
9
10
11
ViewSonic P/N
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Ref. P/N
1LW0VAXVSW1
21W0VAMB011
31W0VASS016
DFDS15FR041
DFDS15FR076
DFHD11MR001
DFHD30MR267
DFHD08FR102
DFHD04MR132
CC647T1MD05
CC71004MD09
Description
W0VA-2 LCD MONITOR(VA2012WB-2)EU GP
W0VA M/B ASSY (NT68563H,W/O DVI) GP
W0VA M/B S/S ASSY (NT68563H,W/O DVI) GP
CONN D-SUB 15P 3R FR(P1.15,H12.55) GP
CONN D-SUB 15P 3R FR(P1.15,H12.55) GP
CONN DIP HEADER 11P 1R MR(P2.0,H4.1) GP
CONN DIP HEADER 30P 2R MR(P2.0,H4.0) GP
CONN DIP HEADER 8P 2R FR(P2.54,H5.0) GP
CONN DIP HEADER 4P 1R MR(P2.0,H4.1) GP
CAP EC 47U 10V(+-20%,105C,5*11,2000H)GP
CAP ELEC DIP 100U 25V(+-20%,105C,6*7) GP
12
N/A
CC73303MD69
CAP ELEC DIP 330U 16V(+-20%,105C,8*9) GP
13
14
15
16
17
18
19
20
21
22
23
N/A
N/A
N/A
N/A
N/A
N/A
B-00004142
N/A
N/A
N/A
N/A
CC810T1MD05
BG612000202
DFTJ05FR037
DC04725K011
AL007496D02
AL007496D29
23W0VABB009
W0VA203-02
DAW0VATB218
BEYG0014DA0
DFHD11MR001
CAP EC 1000U6.3V(+-20%,105C,8*11.5) GP
XTAL DIP 12MHZ(+-30PPM,HC-49/S TYPE) GP
CONN DIP PHONE JACK 5P FR(J303-1-A-G+)GP
CHOKE COIL 47UH(2.5A,+-10%,T07473 GP) GP
IC(20P) TDA7496L(DIP) GP
IC(20P) UTC TDA7496LK(DIP) GP
W0VA BUTTON/B ASSY GP
23W0VABB009 W0VA BB Schematic
PCB(BUTTON)TB(2L,242*12,REVA)W0VA GP
LED(DIP) YELLOW/GREEN(L-3WYGW-F01) GP
CONN DIP HEADER 11P 1R MR(P2.0,H4.1) GP
24
PL-BT-0706-0127
DHP0002B108
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
B-00004145
B-00005205
N/A
C-00004166
N/A
N/A
N/A
N/A
N/A
N/A
M-SCW-0824-6761
N/A
M-SCW-0824-0813
M-MS-0808-8986
M-SCW-0824-0814
N/A
N/A
CB-00002525
CB-00004152
CB-00004150
CB-00004151
E-00004155
M-SCW-0824-6802
M-SCW-0824-0726
N/A
N/A
N/A
C-00006121
N/A
M-MS-0808-9411
C-00005442
PL-00004168
N/A
N/A
N/A
N/A
HW-00004157
N/A
M-SCW-0824-6895
N/A
C-00005750
M-00006097
AS08B532009
AS023360D18
24W0VALB026
34W0VALB000
36W0VAPS014
FAW0VA02014
FAW0VA03011
GBL9C001016
FCL70007019
FCM7T004014
MM30030IBJ4
MF30040BJB9
MF30060BBJ6
MBLI1004018
MM30060BBJ3
MS35080B456
FCL7TA03011
DD0L9VLC015
DD0L9VLC023
DDW0VABU007
DD0W0EIV008
DN0TE130F01
MM30040IBJ9
MF30080BBJ5
ME26060BJ21
FCW0VA02016
FCW0VA03012
25W0VALC023
EAW0VA06010
FBL70008014
FBW0VA01019
26W0VASA008
EAW0VA03011
EAW0VA05013
FAW0VA04017
FBW0VA02015
MF40140IJ29
DDL9TATH107
MF40080IBJ1
27W0VACS006
EBW0VA03011
GAW0VA02014
ViewSonic Corporation
SWITCH PUSH BUTTON(PT-002-B1,50MA,12V)GP
Location
Universal number#
CN1
CN1
CN3
CN4
CN6
CN7
C36
C68,C69,C70,C71
C30,C46,C53,C66,C6
7,C74,C76,C80,C82
C60
Y1
J1
L14
U6
U6
LED1
CN1
SW1,SW2,SW3,SW4,
SW5,SW6,SW7,SW8
PWR MODULE(DTA)EADP-64CF B,90~264V GP
INV MODULE(SEL)W0E(20V,I=6MA) GP
W0VA LCD BEZEL ASSY (NO DVI) GP
W0VA LCD BEZEL SUB ASSY GP
W0VA PCB SHIELDING ASSY(NO DVI)GP
LCD BKT-L W0VA(FAW0VA02,REV3A)GP
LCD BKT-R W0VA(FAW0VA03,REV3A)GP
PANEL SPONGE L9C(GBL9C001,REV3A)GP
MYLAR SCALAR/LCD L70L-A(FCL70007,R3A)GP
AL FOIL M7T(FCM7T004,REV3A) GP
SCREW M3*3-I-NI GP
SCREW F3.0*4.0-B(BNI)GP
SCREW F3.0*6-B(NI)GP
IO NUT LI1(MBLI1004,REV3A)GP
SCREW M3.0*6,B(NI) GP
SCREW F3.5*8-B(NI)(WASHER)GP
AL-(50*25) L7TA(FCL7TA03,REV3B)GP
CABLE MB-LCD(30P,140MM)L9V-5 GP
CABLE LVDS(30P,140MM,LINKTEC,AU)L9VA GP
CABLE MB-BUTTON(11P/11P,240MM)W0VA GP
CABLE MB-INV(7P/8P,320MM)W0E GP
SPEAK ASSY L9T FG-TE130 1.5W*2 GP
SCREW M3.0*4.0-I(NI) GP
SCREW F3.0*8L,B,NI GP
SCREW M2.6*6.0-B(BNI) GP
POWER MYLAR-DOWN W0VA(FCW0VA02,REV3B) GP
INVETER MYLAR-DOWN W0VA(FCW0VA03,R3B) GP
W0VA LCD COVER ASSY(NO DVI) GP
LCD COVER(NO DVI) W0VA(EAW0VA06,R3A)GP
LOCK METAL L70B(FBL70008,REV3A) GP
HINGE-PLATE W0VA(FBW0VA01,REV3A)GP
W0VA STAND ASSY GP
STAND-FRONT W0VA(EAW0VA03,REV3A)GP
STAND-BACK W0VA(EAW0VA05,REV3A)GP
HINGE ASSY W0VA(FAW0VA04,REV3A)GP
CONTACT-PLATE W0VA(FBW0VA02,REV3A)GP
SCREW F4.0*14-I(BNI) GP
CABLE STAND-HINGE(1P,150MM)L7TA GP
SCREW F4.0*8-I(NI)GP
W0VA CHASSIS ASSY GP
HINGE COVER W0VA(EBW0VA03,REV3A)GP
RUBBER PLUG VESA (GAW0VA02,R3A)GRAY GP
56
Confidential - Do Not Copy
Q'ty
1
1
1
1
1
1
1
1
1
4
9
1
1
1
1
1
1
1
0
1
1
1
8
1
1
1
1
1
1
1
1
1
2
6
4
10
2
1
1
2
1
1
1
1
1
4
2
3
1
2
1
1
1
1
1
1
1
1
1
7
1
1
1
1
4
VA2012w-2_VA2012wb-2
Item
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
ViewSonic P/N
N/A
N/A
N/A
E-00005214
E-00006103
N/A
N/A
N/A
N/A
E-00004154
N/A
N/A
DC-00006118
PL-00001806
N/A
C-00004165
CB-00002602
CB-00005211
P-00004159
P-00004161
P-00004162
M-LB-0813-0747
N/A
M-LB-0813-0745
M-LB-0813-0746
N/A
N/A
PL-00005198
M-00004158
M-LB-0813-1043
N/A
N/A
A-PC-0106-0227
Ref. P/N
ME40200PJ28
MM40100BL61
2AW0VAPTA13
AAM201EW007
AAM201EW058
AZW0VABA004
FBW0VA05014
HGW0VA07011
2AW0VAPTQ10
AA20AL01004
AZW0VABQ006
FBW0VA04018
HGW0VA03016
GAL5T001016
28W0VAPK054
38W0VABS001
DDL7VDPC005
DDW9ZAPA009
HAL0T002019
HBW0VA01019
HBW0VA02015
HCL7V004013
HCW0VA01010
HCL7V002011
HCL7V003017
HFW0VA05018
HDW0VX01010
JXLM5003011
JXW0ZB01019
HCL70021011
HFL5V003014
HCL7VC05013
DM333181801
ViewSonic Corporation
Description
SCREW T4.0*20.0-P(BNI) GP
SCREW M4*10.0-B(BNI,NYLOK) GP
W0VA-2 PANEL DEPENDENT KIT ASSY(AUO) GP
LCD(TFT)20" M201EW01 V.0 GP
LCD 20" M201EW01 V.0 FOR VSC CON GP
W0VA-2 SW BIOS(NOVATEK,W/AUDIO)FOR AUO
PANEL HOOK W0VA(FBW0VA05,REV3A)GP
CD+QSG(AU_V03) W0VA-2A(HGW0VA07,REV3A)GP
W0VA-2 PANEL DEPENDENT KIT ASSY(QDI)GP
LCD(TFT) 20" QD20AL01 REV.01 GP
W0VA-2 SW BIOS(NOVATEK,W/AUDIO)FOR QDI
PANEL HOOK W0VA(FBW0VA04,REV3A) GP
CD+QSG(VA2012W-2) W0VA-2(HGW0VA03,R3A)GP
RUBBER-HOLDER L5TL-E(GAL5T001,REV3B)GP
W0VA-2(VA2012WB-2) PACKING ASSY GP
W0VA BASE SUB ASSY GP
CABLE MB-VGA (15/15P,1.8M)L7VD GP
CABLE AUDIO(ST,1.8M)BLACK W9ZA GP
PE BAG L0T(HAL0T002,REV3A)GP
END CAP(L) W0VA(HBW0VA01,REV3A) GP
END CAP(R) W0VA(HBW0VA02,REV3A) GP
CORE LABEL(HCL7V004,REV3A)GP
ID LABEL W0VA(HCW0VA01,REV3A) GP
SERIAL LEBAL L7V(HCL7V002,REV3A) GP
CARTON LEBAL(HCL7V003,REV3A)GP
CARTON(B) W0VA-2(HFW0VA05,REV3A) GP
ENERGY STAR NOTICE W0VX(HDW0VX01,R3A)GP
HANDLE LM5S(JXLM5003,REV 3B) GP
LCD FILM W0ZB-A1(JXW0ZB01,REV3A)GP
HI-POT LABEL L70L(HCL70021,REV3A)GP
SPACE PLATE L5VC(HFL5V003,REV3A)GP
ADDRESS LABEL L7VC (HCL7VC05,REV3A)GP
POWER CORD SP-023+IS-14 1.8M(B)EU GP
Location
57
Confidential - Do Not Copy
Universal number#
Q'ty
2
4
1
1
1
1
2
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0.042
1
1
VA2012w-2_VA2012wb-2
8.
Exploded Diagram and Exploded Parts List
ViewSonic Corporation
Model
Title
Date
ViewSonic Corporation
58
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Rev:
EXPLODED PARTS LIST (VA2012w-2)
ViewSonic Model Number: VS10859
Rev: 1a
Serial No. Prefix: Q92
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
ViewSonic P/N
N/A
B-00004145
B-00005205
B-00004142
N/A
N/A
N/A
M-MS-0808-9244
M-MS-0808-9243
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-SCW-0824-6761
HW-00004156
M-SCW-0824-0813
M-MS-0808-8986
M-SCW-0824-0814
N/A
N/A
CB-00004152
CB-00004150
CB-00004151
E-00004155
N/A
M-MS-0808-9411
C-00005442
N/A
N/A
N/A
N/A
HW-00004157
N/A
M-SCW-0824-6895
C-00006104
M-00006097
N/A
N/A
E-00006103
N/A
N/A
N/A
N/A
M-00004158
PL-00001806
N/A
M-LB-0813-0745
ViewSonic Corporation
Ref. P/N
21W0VAMB011
AS08B532009
AS023360D18
23W0VABB009
EAW0VA01026
EBW0VA01019
EBW0VA02015
FEL7V004015
FEL7V003019
FCW0VA01010
FAW0VA01018
FAW0VA02014
FAW0VA03011
FCW0E002016
FCL70007019
FCM7T004014
MM30030IBJ4
MF30040IJB3
MF30060BBJ6
MBLI1004018
MM30060BBJ3
MS35080B456
FCL7TA03011
DD0L9VLC023
DDW0VABU007
DD0W0EIV008
DN0TE130F01
EAW0VA02022
FBL70008014
FBW0VA01019
EAW0VA03029
EAW0VA05021
FAW0VA04017
FBW0VA02015
MF40140IJ29
DDL9TATH107
MF40080IBJ1
EBW0VA03020
GAW0VA02014
ME40200PJ28
MM40100BL61
AAM201EW058
EAW0VA04025
FBW0VA03011
GAW0VA03011
GAW0VA01018
JXW0ZB01019
GAL5T001016
HCW0VA02016
HCL7V002011
Description
W0VA-2 M/B ASSY (NOVATEK 68563) GP
PWR MODULE(DTA)EADP-64CF B,90~264V GP
INV MODULE(SEL)W0E(20V,I=6MA) GP
W0VA BUTTON/B ASSY GP
LCD BEZEL W0VA SILVER GP
FUNCTION BUTTON W0VA GP
LENS W0VA(EBW0VA02,REV3A)GP
BIRD LOGO-10MM L7VC
LOGO FRONT-VSC-38MM L7VC
SHIELDING MYLAR W0VA GP
SHIELDING W0VA GP
LCD BKT-L W0VA GP
LCD BKT-R W0VA GP
POWER MYLAR W0E-A1 GP
MYLAR SCALAR/LCD L70L-A GP
AL FOIL M7T GP
SCREW M3*3-I-NI GP
SCREW F3.0*4.0-I(MC) GP
SCREW F3.0*6-B(NI)GP
IO NUT LI1
SCREW M3.0*6,B(NI) GP
SCREW F3.5*8-B(NI)(WASHER)GP
AL-(50*25) L7TA GP
CABLE LVDS(30P,140MM,LINKTEC,AU)L9VA GP
CABLE MB-BUTTON(11P/11P,240MM)W0VA GP
CABLE MB-INV(7P/8P,320MM)W0E GP
SPEAK ASSY L9T FG-TE130 1.5W*2 GP
LCD COVER W0VA BKGP
LOCK METAL L70B GP
HINGE-PLATE W0VA1 GP
STAND FRONT W0VA BK GP
STAND-BACK W0VA BK GP
HINGE ASSY W0VA GP
CONTACT-PLATE W0VA GP
SCREW F4.0*14-I(BNI) GP
CABLE STAND-HINGE(1P,150MM) GP
SCREW F4.0*8-I(NI)GP
HINGE COVER W0VA BK GP
RUBBER PLUG VESA GRAY GP
SCREW T4.0*20.0-P(BNI) GP
SCREW M4*10.0-B(BNI,NYLOK) GP
LCD 20"w M201EW01 v0 panel
BASE W0VA BK GP
BASE-PLATE W0VA GP
RUBBER FOOT-C W0VA GP
RUBBER FOOT W0VA GP
LCD FILM W0ZB-A1 GP
RUBBER-HOLDER L5TL-E
ID LABEL(S) W0VA GP
SERIAL LEBAL L7V GP
59
Confidential - Do Not Copy
Q'ty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
4
10
10
4
1
1
2
1
1
1
1
1
1
1
1
1
1
1
7
1
1
1
4
2
4
1
1
1
2
2
1
1
1
1
VA2012w-2_VA2012wb-2
EXPLODED PARTS LIST (VA2012wb-2)
ViewSonic Model Number: VS10859
Rev: 1a
Serial No. Prefix: Q93
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
ViewSonic P/N
N/A
B-00004145
B-00005205
B-00004142
N/A
N/A
N/A
M-MS-0808-9244
M-MS-0808-9243
N/A
N/A
N/A
N/A
N/A
N/A
N/A
M-SCW-0824-6761
HW-00004156
M-SCW-0824-0813
M-MS-0808-8986
M-SCW-0824-0814
N/A
N/A
CB-00004152
CB-00004150
CB-00004151
E-00004155
N/A
M-MS-0808-9411
C-00005442
N/A
N/A
N/A
N/A
HW-00004157
N/A
M-SCW-0824-6895
C-00005750
M-00006097
N/A
N/A
E-00006103
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
ViewSonic Corporation
Ref. P/N
21W0VAMB011
AS08B532009
AS023360D18
23W0VABB009
EAW0VA01018
EBW0VA01019
EBW0VA02015
FEL7V004015
FEL7V003019
FCW0VA01010
FAW0VA01018
FAW0VA02014
FAW0VA03011
FCW0E002016
FCL70007019
FCM7T004014
MM30030IBJ4
MF30040IJB3
MF30060BBJ6
MBLI1004018
MM30060BBJ3
MS35080B456
FCL7TA03011
DD0L9VLC023
DDW0VABU007
DD0W0EIV008
DN0TE130F01
EAW0VA02014
FBL70008014
FBW0VA01019
EAW0VA03011
EAW0VA05013
FAW0VA04017
FBW0VA02015
MF40140IJ29
DDL9TATH107
MF40080IBJ1
EBW0VA03011
GAW0VA02014
ME40200PJ28
MM40100BL61
AAM201EW058
EAW0VA04017
FBW0VA03011
FBW0VA03012
FBW0VA03013
FBW0VA03014
FBW0VA03015
FBW0VA03016
FBW0VA03017
Description
W0VA-2 M/B ASSY (NOVATEK 68563) GP
PWR MODULE(DTA)EADP-64CF B,90~264V GP
INV MODULE(SEL)W0E(20V,I=6MA) GP
W0VA BUTTON/B ASSY GP
LCD BEZEL
FUNCTION BUTTON W0VA GP
LENS W0VA GP
BIRD LOGO-10MM L7VC
LOGO FRONT-VSC-38MM L7VC
SHIELDING MYLAR W0VA GP
SHIELDING W0VA GP
LCD BKT-L W0VA GP
LCD BKT-R W0VA GP
POWER MYLAR W0E-A1 GP
MYLAR SCALAR/LCD L70L-A GP
AL FOIL M7T GP
SCREW M3*3-I-NI GP
SCREW F3.0*4.0-I(MC) GP
SCREW F3.0*6-B(NI)GP
IO NUT LI1(MBLI1004,REV3A)
SCREW M3.0*6,B(NI) GP
SCREW F3.5*8-B(NI)(WASHER)GP
AL-(50*25) L7TA GP
CABLE LVDS(30P,140MM,LINKTEC,AU)L9VA GP
CABLE MB-BUTTON(11P/11P,240MM)W0VA GP
CABLE MB-INV(7P/8P,320MM)W0E GP
SPEAK ASSY L9T FG-TE130 1.5W*2 GP
LCD COVER W0VA GP
LOCK METAL L70B GP
HINGE-PLATE W0VA(FBW0VA01,REV3A)GP
STAND-FRONT W0VA GP
STAND-BACK W0VA GP
HINGE ASSY W0VA GP
CONTACT-PLATE W0VA GP
SCREW F4.0*14-I(BNI) GP
CABLE STAND-HINGE(1P,150MM) GP
SCREW F4.0*8-I(NI)GP
HINGE COVER W0VA(EBW0VA03,REV3A)GP
RUBBER PLUG VESA (GAW0VA02,R3A)GRAY GP
SCREW T4.0*20.0-P(BNI) GP
SCREW M4*10.0-B(BNI,NYLOK) GP
LCD 20"w M201EW01 v0 panel
BASE W0VA GP
BASE-PLATE W0VA
RUBBER FOOT-C W0VA GP
RUBBER FOOT W0VA GP
LCD FILM W0ZB-A1 GP
RUBBER-HOLDER L5TL-E(GAL5T001,REV3B)
SERIAL LEBAL L7V GP
ID LABEL W0VA GP
60
Confidential - Do Not Copy
Q'ty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
4
10
10
4
1
1
2
1
1
1
1
1
1
1
1
1
1
1
7
1
1
1
4
2
4
1
1
1
2
2
1
1
1
1
VA2012w-2_VA2012wb-2
Packing for Shipping
PACKING PART LIST (VA2012w-2 )
ViewSonic Model Number: VS10859
Rev: 1a
Item
1
2
3
4
5
6
7
8
9
10
11
ViewSonic P/N
N/A
P-00004161
P-00004162
N/A
A-00003642
P-00006119
N/A
P-00004159
CB-00002602
CB-00004149
C-00004147
Ref. P/N
1LW0VAXV082
HBW0VA01019
HBW0VA02015
HGW0VA07011
DM33T181004
HFW0VA08017
HCL7VC019011
HAL0T002019
DDL7VDPC005
DD0L0TPC007
38W0VABS010
Location
VA2012w-2 monitor
END CAP (L)
END CAP (R)
USER'S MANUAL & CD
POWER CORD 3P 1.8M
CARTON
CARTON LABEL
PE BAG
VGA CABLE
AUDIO CABLE
Base assy
Q'ty
1
1
1
1
1
1
1
1
1
1
1
PACKING PART LIST (VA2012wb-2 )
ViewSonic Model Number: VS10859
Rev: 1a
Item
1
2
3
4
5
6
7
8
9
10
11
ViewSonic Corporation
61
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
ViewSonic P/N
N/A
P-00004161
P-00004162
N/A
A-PC-0106-0224
P-00006122
N/A
P-00004159
CB-00002602
CB-00004149
C-00004165
Ref. P/N
1LW0VAXVSA5
HBW0VA01019
HBW0VA02015
HGW0VA07011
DM333181G97
HFW0VA09013
HCL7VC019011
HAL0T002019
DDL7VDPC005
DD0L0TPC007
38W0VABS001
Location
VA2012w2 monitor
END CAP (L)
END CAP (R)
USER'S MANUAL & CD
POWER CORD 3P 1.8M
CARTON
CARTON LABEL
PE BAG
VGA CABLE
AUDIO CABLE
Base assy
Q'ty
1
1
1
1
1
1
1
1
1
1
1
ViewSonic Corporation
+20V
VGA-SDA
62
Confidential - Do Not Copy
AC 90-264V
Key Pad
EEPROM
24LC16
INVERTER
ON/OFF
BL-ON
INVERTER HV
+12V
STEP DOWN CONVERTER
Mcu
NT 68F633L
(12MHz)
X'TAL
SCALAR NT68563HF
BL-BRIGHT
BOARD
ADJ
Power Board
CSL
SDA
DVI-SCL
DVI-SDA
VGA-SCL
CSL
DVI-SCL
MCU-VDD(+3.3V)
SDA
DVI-SDA
MCU-VDD(+3.3V)
DVI
I/P
VGA-SCL
RSTN
VGA-SDA
+1.8V
REFCLKI
VGA
I/P
+3.3V
+5V
LCD-ON
LDO
LDO
LDO
PHONE JACK
VOLUME
STANDBY
MUTE
SI9435
+5V
LVDS
MCU-VDD(+3.3V)
CVDD1V8(+1.8V)
+3.3V
TDA7496L
+12V
LCD_VDD
LCD PANEL
9. Block Diagram
VA2012w-2_VA2012wb-2
10. Schematic Diagrams
1
2
ADC_VAA
GND_A
D1
BAV99/NC
L1
BEAD 30/6
3
B1
R122
100/6/NC
R1
75/6
RX
BI1-
5
GI1
5
GND_A
VS
14
14
HS
13
13
12
12
1
D3
ZD5V6/NC
R120
Tx
100/6
11
11
G
10
5
9
4
8
3
7
2
6
1
G
17
10
5
9
4
8
3
7
2
6
1
16
GND_A
R3
1K/6
R119
100/6
VGA-DET
6
Rx
6
D2
BAV99/NC
G1
B1
L3
BEAD 30/6
3
15
2
15
1
ADC_VAA
2
R2
4.7K/6
GND_A
6
0/6
VGA-5V
CN1
D-SUB-Female
VGA-SCL
5
CH201209T-300
L2
MCU-VDD
6
BI1
R4
75/6
G1
CH201209T-300
R1
MCU-VDD
L4
0/6
L5
BEAD 30/6
GI1-
5
GND_A
GND_A
ADC_VAA
D-SUB1
2
R5
4.7K/6
1
R121
100/6/NC
6
VGA-SDA
2
GND_A
D5
BAV99/NC
R1
3
D4
ZD5V6/NC
1
R6
75/6
RI1
5
RI1-
5
CH201209T-300
L6
0/6
GND_A
GND_A
BAV99
3
R7
VS
2
VS
100/6/NC
Color:
Black
D6
ZD5V6
R106
2.2K/6/NC
C1
1000pF/6/NC
IC1
HS
1
2
3
4
5
6
7
1
Color:
Blue
GND_A
GND_A
DB15
-------------------------1
R
2
G
3
B
4
SCL
5
RETURN
6
RGND
7
GGND
8
BGND
9
+5V
10
SYNC.RETURN
11
SDA
12
NC
13
Hs
14
Vs
15
NC
GND_A
R8
100/6/NC
VCC
D5
Q5
D4
Q4
D3
Q3
14
13
12
11
10
9
8
ADC_VAA
C2
0.1uF/6
74LVC14
R107
0/6
D7
ZD5V6
R108
2.2K/6/NC
GND_A
GND_A
2
HS
C3
22pF/6/NC
1
DB15
-------------------------R
1
G
2
B
3
NC
4
RETURN
5
RGND
6
GGND
7
BGND
8
+5V
9
SYNC.RETURN 10
NC
11
SDA
12
Hs
13
Vs
14
SCL
15
D0
Q0
D1
Q1
D2
Q2
GND
VSIN
5
HSIN
5
GND_A
GND_A
GND_A
ViewSonic Corporation
Model
ADC Input
Title
Date
ViewSonic Corporation
63
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Rev:
1
2
1
2
1
2
ADC_VAA
GND_A
GND_A
MCU-VDD
D10
BAV99/NC
MCU-VDD
D11
BAV99/NC
3
D9
BAV99/NC
3
D8
BAV99/NC
R9
R11
10/6
10/6
RX2RX2+
5
5
R10
4.7K/6
R12
4.7K/6
DVI-SCL
DVI-SDA
10/6
10/6
RX1RX1+
5
5
2
R13
R14
2
DVI-SCL
DVI-SDA
D12
ZD5V6/NC
D13
ZD5V6/NC
R15
R16
1K/6
DVI-DET
1K/6
GND_A
D14
BAV99/NC
D15
BAV99/NC
D16
BAV99/NC
1
1
DVI-5V
3
GND_A
GND_A
3
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
ADC_VAA
3
TX1TX1+
TX1/3 Shld
TX3TX3+
+5V
GND
HP Detect
TX0TX0+
TX0/5 Shld
TX5TX5+
TXC Shld
TXC+
TXCSHELL2
GND_A
3
C1
C2
C3
C4
C5
C6
8
1
2
3
4
5
6
7
3
32
SHELL1 AR
AG
AB
AHS
AGND
NC
A VS
TX2TX2+
TX2/4 Shld
TX4TX4+
DDC CLK
DDC DATA
3
31
2
CN2
DVI-I-Female
ADC_VAA
1
ADC_VAA
6
R17
R18
10/6
10/6
R19
R20
10/6
10/6
RX0RX0+
5
5
RXC+
RXC-
5
5
GND_A
GND_A
D17
BAV99/NC
GND_A ADC_VAA GND_A ADC_VAA GND_A ADC_VAA
2
1
2
1
2
1
2
1
DVI Input
GND_A ADC_VAA
BAV99
ViewSonic Corporation
Model
DVI Input
Title
Date
ViewSonic Corporation
64
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Rev:
6
6
VGA_3V3
0.047uF/6
22
SOGI1
R26
R27
75/6
100/6
C18
C19
0.047uF/6
0.047uF/6
23
24
GIN1+
GIN1-
R28
R29
75/6
100/6
C20
C21
0.047uF/6
0.047uF/6
25
26
RIN1+
RIN1-
GND_A
C22
C23
0.1uF/6
0.1uF/6
35
36
RIN0+/Y5
RIN0-/Y6
37
ADC_GND/Y7
51
YUV_CLK
125
126
127
128
SCL
SDA
RSTn
IRQn
45
44
OSCI
OSCO
120
121
IN_VSO/GPO4
IN_HSO/GPO5
118
119
AD0/GPO2
AD1/GPO3
PVCC
2
54
98
72
116
DVDD
DVDD
DVDD
DVDD
15
PVCC
4
13
AVCC
AVCC
28
18
ADC_VAA
ADC_VAA
46
52
63
123
87
107
GND_A
T5M
T5P
T6M
T6P
TCLK2M
TCLK2P
T7M
T7P
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
80
79
78
77
76
75
74
73
71
70
69
68
67
66
65
64
62
61
60
59
58
57
56
55
T5M
T5P
T6M
T6P
TCLK2M
TCLK2P
T7M
T7P
7
7
7
7
7
7
7
7
GPO1
REFCKO/GPO6
GPO7
GPO8
GPO9/PWM1
GPO10/PWM0
117
124
50
49
48
47
DPLL
GND_A
330uF/16V
C30
AD0
AD1
GIN0+/Y3
GIN0-/Y4
7
7
10uF/6.3V/Y5V/1206
C29
BYPASS-VS
BYPASS-HS
SOGI0/Y2
33
34
T4M
T4P
CVDD1V8
GND_A
VGA_3V3
PVCC
GND_A
0.1uF/6
C34
BYPASS-VS
BYPASS-HS
32
T3M
T3P
0.1uF/6
C33
6
6
REFCLKI
BIN0+/Y0
BIN0-/Y1
89
88
85
84
83
82
81
GND_A
120pF/6
C32
REFCLKI
30
31
7
7
T3M
T3P
SPB/DISP_VS
GPO0/DISP_HS
SPA/DISP_DE
T4M
T4P
GND_A
0.1uF/6
C27
6
SCL
SDA
RSTn
IRQn
HSYNCI0/GPO5
VSYNCI0/GPO4
7
7
7
7
7
7
7
7
1uF/8
C31
SCL
SDA
RSTn
IRQn
41
42
T0M
T0P
T1M
T1P
T2M
T2P
TCLK1M
TCLK1P
0.1uF/6
C26
6
6
6
6
BVMID
RVMID
NT68563HF
ADC_VAA
0.1uF/6
C25
GND_A
TP1
YUV-CLK/NC 1
19
27
IC2
PGND
C17
16
390/6 1%
AGND
AGND
AGND
R25
1
7
10
BIN1+
BIN1-
ADC_GNDA
ADC_GNDA
20
21
29
17
0.047uF/6
0.047uF/6
DPLL_GND
C12
C16
DPLL_VDD
CVDD
CVDD
CVDD
75/6
100/6
DVDD
0.1uF/6
C14
RI1
RI1-
R23
R24
OPTION
GND_A
0.1uF/6
C13
3
3
HSYNCI1
VSYNCI1/TOUTP
GND_A
0.1uF/6
C10
GI1
GI1-
39
40
115
114
113
112
111
110
109
108
106
105
104
103
102
101
100
99
97
96
95
94
93
92
91
90
1
D18
TL431CUS
0.1uF/6
C9
3
3
VREF
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
NC
T0M
T0P
T1M
T1P
T2M
T2P
TCLK1M
TCLK1P
0.1uF/6
C8
BI1
BI1-
38
VREF
1K/6
0.1uF/6
C7
3
3
HSIN
VSIN
RX2+
RX2RX1+
RX1RX0+
RX0RXC+
RXC-
43
3
3
2
3
5
6
8
9
11
12
CGND
D/CGND
D/CGND
DGND
DGND
53
86
122
VREF
REXT
R21
C6
10uF/6.3V/Y5V/1206
RX2+
RX2RX1+
RX1RX0+
RX0RXC+
RXC-
RX2+
RX2RX1+
RX1RX0+
RX0RXC+
RXC-
14
ADC_VAA
C5
0.1uF/6
390/6 1%
DVDD
C4
0.1uF/6
4
4
4
4
4
4
4
4
R22
DPLL
B0805/1K
VGA_3V3
L8
B0603/30
ADC_VAA
L7
3
CVDD1V8
GND_A
ViewSonic Corporation
Model
NT68563
Title
GND_A
Date
ViewSonic Corporation
65
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Rev:
4.7K/6
12MHZ
GND_A
R45
REFCLKI
5
IRQn
C40
22pF/6
SCL
SDA
5V-DETECT
RIGHT
LEFT
BL-PWM
VOL-PWM
PANEL_SEL2
PANEL_SEL1
STANDBY
GND_A
0/6
C41
22pF/6
MUTE_KEY
RSTn
BYPASS-HS
MCU-VDD
5
5
+5V
IC4
PWR
1
2
3
4
LCD-ON
MENU
WP
DOWN
7
A0
A1
A2
GND
8
7
6
5
VCC
WP
SCL
SDA
R110
AT24C16
5V-DETECT
DVI-DET
VGA-DET
SEL
UP
R40
100/6
R41
100/6
R42
100/6
R43
100/6
LEDG1
LEDA1
4
3
DVI-SCL
DVI-SDA
VGA-SCL
VGA-SDA
22/6
WP
SCL
SDA
GND_A
R39
15K/6
C39
22pF/6
Rx
Tx
GND_A
R111
10K/6/NC
Y1
3
3
PC2/SOGI
NC2
PC1*
NC1
PC0*
PC3
RSTB
PC4
VDD
PC5
PD6
PE1
GND
PE0
68F633L
OSCO
PC6
OSCI
PC7
P30/RXD
PD0
P31/TXD
PD1
P34/T0
PD2
P35/T1
PD3
PB3/ADC3/INTE1
PD4
PB2/ADC2/INTE0
PD5
PB1/ADC1
PA0/PWM2
PB0/ADC0
PB4*/SCL0*
PA7*/PWM9*
PB5*/SDA0*
PA6*/PWM8*
PB6*/SCL1*
PA5*/PWM7*
PB7*/SDA1*
PA4*/PWM6*
PA1/PWM3
PA3/PWM5
PA2/PWM4
GND_A
C38
0.1uF/6
C35
0.1uF/6
1M/6
GND_A
33
32
40
39
38
19
18
37
36
1
35
34
31
30
29
2
25
26
27
28
3
4
R109
10K/6
GND_A
R37
5
GND_A
41
42
43
10
44
12
22
20
21
11
13
16
17
15
14
24
23
9
8
7
6
5
R36
10K/6
BYPASS-VS
PANEL_SEL3
MCU-VDD
IC3
+
5
0.1uF/6
R118
10K/6/NC
47uF/16V
C37
9
PANEL_SEL2
PANEL_SEL3
100K/6
MCU-VDD
GND_A
MUTE
PANEL_SEL1
R116
10K/6/NC
MUTE
BL-ON
R34
C36
+5V
R114
10K/6/NC
+5V
8
MCU-VDD
R117
10K/6
R32
MCU-VDD
R115
10K/6
4.7K/6
MCU-VDD
R113
10K/6
R31
MCU-VDD
GND_A
4
4
3
3
GND_A
GND_A
68F633-PLCC44
MCU-VDD
+5V
JP1
R48
2K/6
R47
2K/6
MCU-VDD
R49
1K/6
R50
BL-PWM
4.7K/6
BL-BRIGHT
4.7K/6
STANDBY
SCL
SDA
9
JP2
1
2
3
4
GND_A
CON4/NC
SCL
SDA
CON4/NC
GND_A
For Debug Use
8
MCU-VDD
LEFT-
1
R53
LEDA1
Q1
R56
4.7K/6
2
MMST3906
LEDA
3
9
C43
0.1uF/6/NC
VOLUME
MUTE_KEY
MENU
SEL
PWR
DOWN
UP
RIGHT
LEFT
LEDA
LEDG
1K/6
1K/6
1K/6
1K/6
1K/6
1K/6
1K/6
1K/6
330/6
330/6
1
4.7K/6
R112
R55
R57
R59
R60
R61
R62
R64
R65
R66
4.7K/6
R54
1K/6
R58
MUTEMENUSELPWRDOWNUPRIGHT-
11
10
9
8
7
6
5
4
3
2
1
R52
GND_A
4.7K/6
CN3
+5V
VOL-PWM
+5V
TX
RX
C42
0.1uF/6
R51
1
2
3
4
Q2
LEDG1
R63
CON11P-2.0S
4.7K/6
2
3
MMST3906
LEDG
GND_A
GND_A
MCU-VDD
MCU-VDD
MCU-VDD
GND_A
GND_A
MCU-VDD
MCU-VDD
GND_A
MCU-VDD
MCU-VDD
2
D33
CHN217
3
GND_A
1
2
D32
CHN217
3
MENU-
1
2
D31
CHN217
1
2
D30
CHN217
1
2
D29
CHN217
1
2
D28
CHN217
GND_A
SEL3
PWR3
DOWN-
3
GND_A
1
D27
CHN217
2
3
GND_A
1
D34
CHN217
3
2
1
UP3
RIGHT-
LEFT-
MUTE-
GND_A
MCU-VDD
ViewSonic Corporation
Model
MCU(I/O_Key)
Title
Date
ViewSonic Corporation
66
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Rev:
5
5
CN4
5
5
5
TCLK1M
T3M
T4M
5
5
5
5
T5M
T6M
TCLK2M
T7M
R68
10K/6/NC
TCLK1M
T3M
T4M
T6M
TCLK2M
T7M
LCD-VDD
R70
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
T0P
T1P
T2P
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
TCLK1P
T3P
T4P
5
5
5
TCLK1P
T3P
T4P
5
5
5
T5P
T5P
TXB2+
T6P
T6P
TXBC+ TCLK2P
TCLK2P
TXB3+ T7P
T7P
LCD-VDD
1841 30P
GND_A
0/6/NC
T0P
T1P
T2P
R69
T0M
T1M
T2M
5
5
R67 5
5
+3.3V
10K/6/NC
0/6/NC
+3.3V
5
5
5
T0M
T1M
T2M
GND_A
GND_A
GND_A
Max 2.0A
+5V
L9
+18V BEAD 120/1206
L10
BEAD 120/1206/NC
8
7
6
5
BEAD 120/1206
2.2K/6
GND_A
6
LCD-ON
R73
4.7K/6
2
3
Q4
1 MMBT3904
+
C46
330uF/16V
R72
1
2
3
4
L12
0.1uF/6
4.7K/6
LCD-VDD
SI9435
C48
Q3
R71
C45
2200pF/6
C44
2200pF/6
L11
BEAD 120/1206/NC
C47
0.1uF/6
+12V
GND_A
GND_A
2005.06.13 modify
ViewSonic Corporation
Model
PANEL OUTPUT
Title
GND_A
ViewSonic Corporation
67
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Date
Rev:
5V
L13
BEAD 120/1206/NC
D19
1SS355
DC
1
IS
DE
2
R75
47/6
6
VCC
CF
3
R76
330K/6
GND
4
1SS355
GND_A GND_A
1
C56
1uF/8
AIC1563
MMST3906
GND_A
2200pF/6
+5V
3
R78
1K/6 1%
3K/6 1%
C57
Q6
2
GND_A
R79
C51
0.1uF/6
4
3
2
1
D20
R77
240K/6 1%
FB
Q5
NDS9410A/SO
5
6
7
8
BOOST
7
Max 2.5A 100mil * 4via
R80
1 47UH
L15
BEAD 120/1206
1
1K/6 1%
C58
1000pF/6
D21
CN6
RB081L-20
CONN 4x2-R
2
GND_A
GND_AGND_AGND_A
2
4
6
8
BL-BRIGHT
GND_A
GND_A
BL-ON
BL-ON
BL-BRIGHT
6
6
C83
10K/6
1
3
5
7
GND_A
C60
1000uF/6.3V
Max 1.2A 60mil * 3 via
GND_A
L14 2
C59
0.1uF/6
5
C54
0.1uF/8
C53
330uF/16V
C52
0.1uF/6
2 0/1210
8
C55
120pF/6
GND_A
FUSE1 1
U1
+12V
R74
GND_A
0/1206
C50
330uF/16V/NC
2 0/1210/NC
C49
0.1uF/6/NC
FUSE2 1
GND_A
+12V
L16
+18V
D22
1
2
2
100UH/NC
RB081L-20/NC
R81
C63
2200pF/6/NC C64
0.1uF/6/NC
R83
+
13.3K/1%/NC
560/6/NC
C61
330uF/16V/NC
C62
+
100uF/25V/NC
R82
1
390K/6/NC
U2
8
7
6
5
GND_A
SC
1
SE
2
TC
3
GND
4
DRI
IPK
VCC
FB
R84
U3
3
1
+5V
GND_A
C65
L17
BEAD 120/0805
330pF/6/NC
AIC1563/NC
2
ADJ/GND 4
4
VGA_3V3
LT1117/TO223
U3-A1
GND_A
1K/1%/NC
VOUT
VIN
3
VIN
1
ADJ/GND
VOUT
L18
BEAD 120/0805
2
DVDD
R85
200/6 1%
AIC1084/TO252/NC
R86
330/6 1%
+
C67
330uF/16V
GND_A
L19
BEAD 120/0805
ADC_VAA
U5-A1
+5V VGA-5V DVI-5V
D24
C66
330uF/16V
+
GND_AGND_A
U4
D23
BAT54C-GS08
GND_A
3
VOUT
2
3
VIN
VOUT
2
VIN
1
ADJ/GND 4
4
1
ADJ/GND 4
4
LT1117/TO223
LT1117/TO223/NC
+5V
U4-A1
3
VIN
1
ADJ/GND
VOUT
D25
2
3
2
L28
BEAD 120/0805
R87
12
1
3
1
RB081L-20 RB081L-20
VIN
VOUT
ADJ/GND
R88
2
R89
+ C69
100uF/25V
1
C70
100uF/25V
330/6 1%
+
C68
100uF/25V
+
AIC1084/TO252
R90
150/6 1%
330/6 1%
GND_A
GND_A
ViewSonic Corporation
L21
BEAD 120/0805
2
AIC1084/TO252/NC
200/6 1%
68
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
CVDD1V8
D26
+
C71
L20
BEAD 120/0805
+1V8
U5
MCU-VDD
100uF/25V
SSM12LL
ViewSonic Corporation
Model
Scaler Power
Title
Date
Rev:
+5V
10K/6
R93
3
Q7
1MMBT3904
2K/62
VOLU
6K8/6
10K/6
R95
VOLUME
R92
R94
6
1K/6
C72
1uF/8
R91
VCC12
+12V
L22
BEAD/1206
AGND
L23 BEAD 120/0805
1
2 Z0415
L_LINE
R96
LIN_PC
100/6
C75
0.47uF/6
4
INL
RIN_PC
100/6
R98
20K/6
C79
220pF/6
R97
C77
0.47uF/6
9
INR
VAROUT_L
R99
20K/6
1
2 Z0416
L24 BEAD 120/0805
0.1uF/6
330uF/16V
AGND
OUTL
R_LINE
C74
16
15
VS
1
5
4
3
2
ZD005D100
C78
220pF/6
J1
U6
C73
VS
PC
AUDIO-IN
17
C76
SPKOUTL
330uF/16V
5
VOLUME
6
7
CN7
R100
BEAD 120/0805
R101
BEAD 120/0805
VOLU
1
2
3
4
4606-04-04P-R
+5V
AGND
AGND
10K/6
R103
10K/6
STBY
VAROUR_R
12
MUTE
OUTR
10
SVR
14
C80
SPKOUTR
330uF/16V
L25
BEAD 120/1206
MUTE
MUTE
Q8
2
1
C82
330uF/16V
C81
0.1uF/8
DTC144EUA
TDA7496L
1
2
3
13
18
19
20
6
GND
GND
GND
GND
GND
GND
GND
3
R102
11
AGND
L26 BEAD/1206
+5V
AGND
R104
10K/6
R105
AGND
AGND
GND_A
10K/6
BEAD/1206
3
L27
6
STANDBY
STANDBY
Q9
2
AGND
GND_A
1
DTC144EUA
ViewSonic Corporation
AGND
Model
AUDIO
Title
Date
ViewSonic Corporation
69
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Rev:
11. PCB Layout Diagrams
MB TOP
ViewSonic Corporation
70
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
MB TOP
ViewSonic Corporation
71
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
MB BOTTOM
ViewSonic Corporation
72
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
* Reader’s Response*
Dear Readers:
Thank you in advance for your feedback on our Service Manual, which allows continuous improvement
of our products. We would appreciate your completion of the Assessment Matrix below, for return to
ViewSonic Corporation.
Assessment
A. What do you think about the content of this Service Manual?
Unit
Excellent
Good
Fair
Bad
1. Precautions and Safety Notices
2. Specification
3. Front Panel Function Control Description
4. Circuit Description
5. Adjustment Procedure
6. Troubleshooting Flow Chart
7. Recommended Spare Parts List
8. Exploded Diagram and Exploded Parts List
9. Block Diagrams
10. Schematic Diagrams
11.PCB Layout Diagrams
B. Are you satisfied with this Service Manual?
Item
Excellent
Good
Fair
Bad
1. Service Manual Content
2. Service Manual Layout
3. The form and listing
C. Do you have any other opinions or suggestions regarding this service manual?
Reader’s basic dada:
Name:
Title:
Company:
Add:
Tel:
Fax:
E-mail:
After completing this form, please return it to ViewSonic Quality Assurance in the USA at facsimile
1-909-839-7943. You may also e-mail any suggestions to the Director, Quality Systems & Processes
(marc.maupin@viewsonic.com)
ViewSonic Corporation
73
Confidential - Do Not Copy
VA2012w-2_VA2012wb-2
Download PDF