ATON | CL100 | User manual | ATON CL100 User manual

Aton CL100 - Gigaset C45 / SWZ PTT en / Internet / cover.fm / 18.5.06
Handset Aton CL100
User manual
Aton CL100 - Gigaset C45 / SWZ PTT en / Internet / cover.fm / 18.5.06
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / overview.fm / 19.6.06
Handset at a glance
14
¨
V
11.11.05
§§§§§§INT§§§§§
11:56
§§§Menu§§
1
2
6
4
12
13
9
5
3
11
10
1 Display in idle status (example)
2 Battery charge level
e V U (1/3 charged to fully charged)
= flashes: battery almost flat
e V U flashes: battery charging
3 Control key (page 7)
4 Display keys (page 7)
5 End call key, On/Off key
End call, cancel function, go back one menu level
(press briefly), back to idle status (press and hold),
activate/deactivate handset (press and hold in idle
status)
6 Message key
Opens calls and message lists
Flashes: new message or new call
7 Hash key
Confer (Flash) (press and hold)
Toggle between upper/lower case letters and digits
for text entry (page 29)
8 Microphone
9 Swisscom Voice Portal key (see page 12)
10 Star key
Ringtones on/off (press and hold in idle status),
11 Connection socket for headset (page 7)
12 Handsfree key
Switch between earpiece and handsfree mode
Lights up: handsfree activated
Flashes: incoming call
13 Talk key
Answer a call, open last number redial list (press
briefly), start dialling (press and hold)
14 Signal strength
¦ § ¨ (low to high)
¥ flashes: no reception
7
8
1
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / C45_IVZ.fm / 18.5.06
Contents
Handset at a glance . . . . . . . . . . . . . . 1
Safety precautions . . . . . . . . . . . . . . . 3
Aton CL100 –
More than just a telephone . . . . . . . . 4
Setting up the handset for use . . . . . 4
First steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Operating the handset . . . . . . . . . . . 7
Activating/deactivating the handset . . . . . . .
Control key on the handset . . . . . . . . . . . . . .
Display keys . . . . . . . . . . . . . . . . . . . . . . . . . .
Returning to idle status . . . . . . . . . . . . . . . . .
Menu management . . . . . . . . . . . . . . . . . . . .
Swisscom Voice Portal key . . . . . . . . . . . . . . .
Correcting wrong inputs . . . . . . . . . . . . . . . .
Belt clip and headset . . . . . . . . . . . . . . . . . . .
7
7
7
7
7
8
8
8
Making calls . . . . . . . . . . . . . . . . . . . . 8
Making an external call . . . . . . . . . . . . . . . . .
End call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Answering a call . . . . . . . . . . . . . . . . . . . . . . .
Handsfree talking . . . . . . . . . . . . . . . . . . . . .
8
9
9
9
Using the directory and lists . . . . . . 10
Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Last number redial list . . . . . . . . . . . . . . . . . 11
Opening lists with the message key . . . . . . 11
Handset settings . . . . . . . . . . . . . . . . 12
Changing the display language . . . . . . . . . .
Setting the display . . . . . . . . . . . . . . . . . . . .
Activating/deactivating Auto talk . . . . . . . .
Adjusting the loudspeaker volume . . . . . . .
Changing ringtones . . . . . . . . . . . . . . . . . . .
Advisory tones . . . . . . . . . . . . . . . . . . . . . . .
Using the handset as an alarm clock . . . . . .
Restoring the handset factory settings . . . .
12
12
12
12
12
13
14
14
Appendix . . . . . . . . . . . . . . . . . . . . . . 15
Symbols and typographical
conventions used . . . . . . . . . . . . . . . . . . . . .
Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contact with liquid . . . . . . . . . . . . . . . . . . .
Faults and self-help with
troubleshooting . . . . . . . . . . . . . . . . . . . . . .
Warranty/Maintenance/Repair/
Authorisation . . . . . . . . . . . . . . . . . . . . . . . .
Repair/Maintenance . . . . . . . . . . . . . . . . . . .
Specifications . . . . . . . . . . . . . . . . . . . . . . . .
Writing and editing text . . . . . . . . . . . . . . . .
15
15
15
15
16
16
17
17
Accessories . . . . . . . . . . . . . . . . . . . . 19
Index . . . . . . . . . . . . . . . . . . . . . . . . . 20
2
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / security.fm / 19.6.06
Safety precautions
Caution:
Read the safety precautions and the operating instructions before use.
Explain their contents to your children, and the potential hazards associated with using the telephone.
$
Use only the mains adapter supplied, as indicated on the underside of the charging cradle.
Fit only the recommended rechargeable batteries (page 17) of the same type!
This means: do not use any other battery type or non-rechargeable batteries as this
could result in significant health risks and personal injury.
‹
Œ
Insert rechargeable batteries with the correct polarity, and use them according to this user
guide (polarity symbols can be seen in the handset's battery compartment, page 4).
The operation of medical appliances may be affected. Note the technical conditions of the
respective environment, e.g. doctor's surgery.
The handset may cause an unpleasant humming noise in hearing aids.
Do not install the charging cradle in bathrooms or shower rooms. The handset and
charging cradle are not splash proof (page 15).
Do not use the phone in environments with a potential explosion hazard, e.g. paint shops.
ƒ
If you give your Aton to someone else, make sure you also give them the operating manual.
Information about disposal
At the end of its service life this product must not be disposed of among the normal household refuse. Instead, it must be handed in at a sales outlet or at a collection point for recycling electrical and electronic devices in accordance with regulations governing the
return, taking back and disposal of electrical and electronic devices (ORDEA).
The materials can be recycled as indicated. By recycling materials and reusing or utilising
old appliances in any other way you are making an important contribution to the protection of the environment.
Note:
Not all of the functions described in this user guide are available in all countries.
3
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / starting.fm / 19.6.06
Aton CL100 –
More than just a telephone
The polarity is indicated in the battery compartment.
Note:
All CLIP, SMS and "Swisscom Voice Portal" functions
are dependent on the network provider.
Your handset not only lets you store up to
100 telephone numbers (page 10) – your
Aton CL100 can do much more:
u You can programme the keys of your
handset with important phone numbers.
The number is then dialled by simply
pressing a key (page 10).
u Use the handsfree function (page 9) to
keep your hands free when making a call.
u Use your handset as an alarm clock
(page 14).
Have fun using your new Aton CL100!
Setting up the handset for use
The pack contains:
u one Aton CL100 handset
u one charging cradle (incl. mains adapter)
u two batteries
u one battery cover
u one belt clip
u one user guide (German, French, Italian)
u one headset.
First steps
Inserting the batteries
Caution:
Use only the rechargeable batteries recommended
on page 17! This means: never use a conventional
(non-rechargeable) battery or other battery type,
otherwise serious damage to health and property
cannot be ruled out, e.g. the outer casing of the batteries could be destroyed or the batteries could
explode. The phone could also malfunction or be
damaged as a result of using batteries that are not of
the recommended type.
¤
4
Insert the batteries the right way round (see
figure).
The handset switches on automatically. You will
hear a confirmation tone.
Note:
If the handset does not activate automatically when
the batteries are fitted, you must first charge the batteries (page 5).
Closing the battery cover
¤
¤
First, align the notches on the side of the
battery cover with the protrusions on the
inside of the housing.
Then press the cover until it clicks into place.
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / starting.fm / 19.6.06
Opening the battery cover
¤
¤
If fitted, remove the belt clip.
Place your finger in the headset socket cavity and pull the battery cover upwards.
istered successfully, you will see the display key
§INT§ at the bottom left of the display.
Notes:
–
–
–
–
Automatic registration is not possible when the
base on which you wish to register the handset is
being used to make a call.
A key press cancels automatic registration.
If four handsets are already registered to the base
station there are two options:
– The handset with the internal number 4 is in
idle status: the handset you wish to register is
assigned the number 4. The handset that was
previously number 4 is de-registered.
– The handset with the internal number 4 is
being used: the handset you wish to register
cannot be registered.
If automatic registration does not work the handset will have to be registered manually (page 5).
Manual registration Aton CL100
Connecting the charging cradle
Connecting up the charging cradle and mounting it on the wall (if required) is described at the
end of these instructions.
Registering your phone
Before you can use your Aton CL100 you must
register it to a base station. The actual registration procedure will depend on the type of base
station.
You must activate manual registration of the
handset at both the handset and the base station.
If the handset has been registered successfully
you will see the display key §INT§ at the bottom
left of the display. Otherwise repeat the procedure.
1. On the handset
Menu§
~
Automatic registration Aton CL100
Important: The handset must not already be
registered to any base unit.
Registering the handset to the Aton CL100 base
is automatic.
Place the handset in the charging cradle of
the base unit with its display facing forward.
¤
You will hear a confirmation tone.
Automatic registration can take up to five minutes. While registration is in progress the screen
displays Registering and Base flashes. The handset is assigned the lowest unassigned internal
number (1–4). If several handsets are registered to the base, the internal number is shown
in the display after registration, e.g. INT 2. This
means that the handset has been assigned the
internal number 2. If the handset has been reg-
¢ Settings ¢ Handset ¢ Register Handset
Enter the system PIN of the base
station (the default is 0000) and
press §OK§. You will see, e.g. Registering Base.
2. On the base station
Within 60 seconds, initiate registration on
the base as described in the base unit's
instructions.
¤
Charging batteries
¤
¤
Plug the mains adapter of the charging cradle into a mains power socket.
Place the handset in the cradle with its display facing forward.
Battery charging is indicated in the top right of
the display by a flashing battery icon e, V
or U. During handset operation, the battery
icon indicates the charge status of the batteries
(page 1).
5
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / starting.fm / 19.6.06
Charging and discharging the battery for the
first time
The correct charge status can only be displayed
when the batteries are first fully charged and
discharged through use.
To do this, leave the handset in the charging
cradle without interruption until the battery icon stops flashing in the display. Your
handset need not be switched on for it to
charge.
Once the batteries are fully charged, remove
the handset from the cradle and do not put
it back again until the batteries are fully discharged.
¤
¤
Notes:
–
–
–
–
–
After the first battery charge and discharge you
may replace your handset in the charging cradle
after every call.
The handset should only be placed in a base station or charging cradle that is designed for it.
When the handset is in the cradle, it charges even
if it is switched off. You will see the charge status
in the display.
If the handset has switched itself off because the
batteries are flat and if it is then placed in the cradle, it will switch itself on automatically.
After the first battery charge and discharge you
may replace your handset in the charging cradle
after every call.
Please note:
–
–
–
Always repeat the charging and discharging procedure if you remove the batteries from the handset and insert them in again.
The batteries may warm up as they are charging.
This is not dangerous.
After a while the charge capacity of the batteries
will decrease for technical reasons.
Setting the date and time
§Menu§
~
~
¢ Settings ¢ Date/Time
Enter the day, month and year
with 6 digits and press §OK§. Use q
to move between the fields.
Enter hours and minutes with 4
digits (e.g. 0 7 1 5 for 07.15 hrs)
and press §OK§. Use q to move
between the fields.
Your Aton CL100 is now ready for operation!
6
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / telephony.fm / 19.6.06
Operating the handset
Example:
Activating/deactivating the handset
a
§§§§INT§§§
§§Menu
Press and hold the end call key.
1
2
You will hear the confirmation beep.
1 Current display key functions
2 Display keys
Control key on the handset
The most important display icons are:
1
1 Control key
In this user guide, the side of the control key
that you must press in the given operating
situation is shown in black (top, bottom). Example: t for "press the top of the control key".
The control key has a number of different functions:
When the handset is in idle status
s
Open the directory.
t
Adjust the ringer melody volume
of the handset (page 13).
In lists and menus
t/s
Scroll up/down line by line.
In an input field
t/s
Move the cursor left or right.
During an external call
s
Open the directory.
t
Adjust loudspeaker volume for
earpiece and handsfree mode.
Display keys
The current display functions are shown in the
bottom display line in reversed highlights. The
functions of the display keys change according
to the operating situation.
§Back§
Go back one menu level or cancel
the operation.
§INT§
Make an internal call.
§Menu§
Open the main menu or a contextdependent menu.
§OK§
Confirm highlighted selection.
§<C§
Delete key: backspace delete one
character at a time.
Returning to idle status
You wish to return to idle status from anywhere
in the menu:
Press the end call key a and hold.
¤
Or:
¤
Press no key: after 2 minutes the display will
return automatically to idle status.
Changes which you have not confirmed/stored
by pressing §OK§ will be rejected.
For an example of the display in idle status,
page 1.
Menu management
Your telephone's functions are accessed in a
menu that has a number of levels.
Main menu (first menu level)
¤
To open the main menu, press §Menu§ with the
handset in idle status.
Accessing a function
¤
Scroll to the function with the control key
q and press §OK§.
The corresponding submenu (the next menu
level) is opened.
7
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / telephony.fm / 19.6.06
Belt clip and headset
Submenus
The functions in the submenus are displayed as
lists.
Accessing a function:
Scroll to the function with the control key
q and press §OK§.
¤
By using a belt clip and headset (optional) you
can easily make your Aton CL100 a constant
companion both inside the building and in its
immediate vicinity.
A short press on the end call key a returns you
to the previous menu level / cancels the operation.
Attaching the belt clip
Swisscom Voice Portal key
¤
S
Press the key and you are connected directly to the Swisscom
Voice Portal. The access number is
pre-programmed as 0848 849 850
and cannot be changed.
Note:
This key connects to you to the Swisscom Voice Portal, where additional services such as call diversion
(service 21, 61 or 67), call waiting (service 43) or
three-party conference can be activated simply by
voice command. You can also access the latest sport,
news and weather updates with a simple voice command.
Correcting wrong inputs
u Navigate to the incorrect input with the control key if û is displayed.
u Press §<C§ to delete the character to the left of
the cursor.
u Insert new character to the left of the cursor.
u When entering the time and date etc., edit
the flashing character.
You will find explanations for the symbols and
typographical conventions used in this user
guide in the appendix, page 15.
There are notches for attaching the belt clip on
the side of the handset at approximately the
same height as the display.
Press the belt clip to the back of the handset
so that the lugs of the belt clip click into the
notches.
The tongue of the belt clip must face the battery compartment.
Connection socket for headset
You can use headsets with jack connectors.
The following models have been tested and
are therefore recommended: the headset supplied, HAMA Plantronics M40, MX100 und
MX150.
The call quality of other models cannot be guaranteed.
Making calls
Making an external call
External calls are calls using the public telephone network.
~c
Or:
c~
Enter the number and press the
talk key.
Press and hold the talk key c and
then enter the number.
You can cancel the dialling operation with the
end call key a.
Notes:
–
–
–
8
Dialling with the directory (page 10) or last
number redial list (page 11) saves repeated keying of phone numbers.
You can assign a number from the directory to a
key for speed dialling (page 10).
You can edit or add to any phone number selected
by means of quick dialling or from the directory
and use it for the current call.
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / telephony.fm / 19.6.06
End call
a
Press the end call key.
Answering a call
The handset indicates an incoming call in three
ways: it rings, there is a display on the screen
and the handsfree key d flashes.
You can take calls:
Pressing the talk key c.
Pressing the handsfree key d.
¤
¤
If the handset is in the charging cradle and the
AutoAnswer function is activated (page 12), the
handset will take a call automatically when you
lift it out of the cradle.
If the ringtone is intrusive, press §Menu§ Silent.
You can take the call so long as it is displayed on
the screen.
Handsfree talking
In handsfree mode you need not hold the handset to your ear but place it e.g. on the table in
front of you to allow others to participate in the
call.
Activating/deactivating handsfree
Activating while dialling
~d
Enter the number and press the
¤
handsfree key.
You should inform your caller before you use
the handsfree function so that they know
someone else is listening.
Switching between earpiece and handsfree
mode
d
Press the handsfree key.
Switch handsfree on and off during a call.
If you wish to place the handset in the charging
cradle during a call:
Press the handsfree key d and hold it while
placing the handset in the base station. If
the handsfree key d does not light up, press
the key again.
¤
To find out how to adjust the volume, see
page 12.
9
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / directories.fm / 19.6.06
Using the directory and lists
You can save 100 entries in the directory.
You can create a personalised directory for your
own individual handset. However, you can send
the list or individual entries to other handsets
(page 10).
Managing directory entries
You have selected an entry (page 10).
Editing an entry
§Menu§
~
~
Directory
¢ Edit Entry
Edit the number if required, and
press §OK§.
Edit the name if required, and
press §OK§.
In the directory you store numbers and matching names.
With the handset in idle status, open the
directory by pressing s.
Using other functions
s ¢ s (select entry; page 10) ¢ §Menu§
Length of an entry
Use Number
Edit or add a stored number. Then dial or use
other functions with §Menu§.
¤
Number:
Name:
max. 32 digits
max. 16 characters
Note:
You can assign a number from the directory to a key
for speed dialling (page 10).
Storing the first number in the directory
s ¢ Directory empty New Entry?
~
Enter number and press §OK§.
~
Enter the name and press §OK§.
Storing a number in the directory
s ¢ §Menu§ ¢ New Entry
~
Enter number and press §OK§.
~
Enter the name and press §OK§.
The following functions can be selected
with q:
Delete Entry
Delete a selected entry.
Send Entry
Send a single entry to another handset
(page 10).
Delete List
Delete all directory entries.
Send List
Send the complete list to another handset
(page 10).
Shortcut
Assign to the current entry for speed dialling
to a selected key.
Using speed dial keys
Selecting a directory entry
¤
s
Sending the directory to another handset
Open the directory.
You have the following options:
u Use q to scroll to the entry until the
required name is selected.
u Enter the first character of the name, or
scroll to the entry with q.
Dialling with the directory
s ¢ q (select entry; page 10)
c
Press the talk key. The number is
dialled.
Press and hold the required quick dial key.
Requirements:
u The sending and receiving handsets must
both be registered to the same base station.
u The other handset and the base unit can
send and receive directory entries.
s ¢ q (select entry; page 10) ¢ §Menu§
¢ Send Entry / Send List
~
Enter the internal number of the
receiver handset and press §OK§.
A successful transfer is confirmed by a message
and the confirmation beep at the receiver handset.
If you have sent a single entry, you can transfer
another entry with §OK§.
10
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / directories.fm / 19.6.06
Please note:
u Entries with identical numbers are not overwritten in the receiver handset.
u The transfer is cancelled if the phone rings
or if the memory of the receiving handset is
full.
Copying the displayed number to the
directory
Numbers that are displayed in a list such as the
calls list or the last number redial list, can be
copied to the directory.
A number is displayed.
¤
¢
Copy to Directory
Complete the entry (page 10).
§Menu§
Copying a number from the directory
You can open the directory in many operating
situations e.g. to copy a number. Your handset
need not be in idle status.
s
q
Open the directory.
Select entry (page 10).
Last number redial list
The last number redial list contains the ten
numbers last dialled with the handset
(max. 32 numbers). If one of the numbers is
in the directory, the corresponding name will
be displayed.
Managing entries in the last number
redial list
c
q
Press the key briefly.
§Menu§
Press the display key.
Select an entry.
The following functions can be selected
with q:
Use Number (as in the directory, page 10)
Copy to Directory
Copying an entry to the directory (page 11).
Delete Entry (as in the directory, page 10)
Delete List (as in the directory, page 10)
Opening lists with the message key
An advisory tone sounds as soon as a new
message arrives in a list. The message key f
flashes. A message appears in the display.
When you press the flashing key f, you will
see all the lists that contain new messages.
If only one list contains new messages, this
will be opened automatically.
Note:
If calls are stored in the network answering machine
you will receive a message if the appropriate settings
have been made (see the network answering
machine instructions of your network provider).
Dialling from the last number redial list
c
q
c
Press the key briefly.
Select an entry.
Press the talk key again. The
number is dialled.
11
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / settings.fm / 19.6.06
Handset settings
Activating/deactivating Auto talk
Your handset is preconfigured but you can
change these settings to suit your individual
requirements.
When this function is activated, when a call
arrives you can simply lift the handset out of
the charging cradle without having to press the
talk key c.
Changing the display language
You can view the display texts in different languages.
§Menu§
¢ Settings ¢ Handset ¢ Language
The current language is indicated by ‰.
q
a
§Menu§
¢ Settings ¢ Handset
Auto Answer Select and press §OK§ (‰ = on).
a
Press and hold (idle status).
Adjusting the loudspeaker volume
If you accidentally choose a language you do
not understand:
You can set the loudspeaker volume for handsfree speaking to five different levels and the
earpiece volume to three different levels. You
can only adjust the loudspeaker volume during
a call.
§Menu§
You are conducting an external call.
Select a language and press §OK§.
Press and hold (idle status).
422
q
Press keys one after the other.
Select the correct language and
press §OK§.
Setting the display
You have a choice of four colour schemes and
several different contrasts. You can also set a
screensaver and the illumination.
§Menu§
¢ Settings ¢ Handset ¢ Display
You have the following options:
Screensaver
There are four different screensavers and No
Screensaver or Digital Clock settings.
Colour Scheme
Four colour schemes. When the illumination
is switched off the display is shown in black
and white regardless of the selected setting.
Contrast
Backlight
In Charger / Without Charger. Determines
whether the illumination stays on permanently or is switched off after a certain time
(‰ = permanently switched on).
Note:
If the illumination is switched on outside the
charging cradle, the standby time for the handset
is considerably reduced!
12
t
q
Press the control key.
Adjust the volume and press §OK§.
Note:
The handsfree volume can only be adjusted when
this function is set.
Changing ringtones
u Volume:
Five volume levels (1–5; e.g. volume 2 =
ˆ) and "Crescendo" ring (6; volume
increases with each ring = ‰ ).
u Melody:
List of pre-loaded ringer melodies. The first
three melodies are the "classical" ring tones.
You can also set different melodies for the following functions:
u External Calls: For external calls
u Internal Calls: For internal calls
u Alarm Clock: For the alarm clock
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / settings.fm / 19.6.06
Setting ringer volume
The ringer volume is the same for all types of
ring.
§Menu§
¢ Audio Settings ¢ Ringer Volume
Or in idle status:
t
Press briefly.
Then:
q
a
Adjust the volume and press §OK§.
Press and hold (idle status).
Setting ringer melody
Set different ringer melodies for external calls,
internal calls and the alarm clock.
§Menu§
¢ Audio Settings ¢ Ringer Melody
External Calls / Internal Calls / Alarm Clock
Select and press §OK§.
q
a
Select melody (‰ = on) and
press §OK§.
Press and hold (idle status).
Advisory tones
Your handset uses advisory tones to tell you
about different activities and statuses. The following tones can be activated and deactivated
independently of each other:
u Advisory tones:
– Key beep: Each key press is acknowledged.
– Confirmation beep (a rising tone
sequence): at the end of the entry/setting, when the handset is placed in the
charging cradle and when a new entry
arrives on the calls list.
– Error beep (descending tone sequence):
when you make an incorrect entry.
– Menu end tone: when scrolling at the
end of a menu.
u Battery warning tone: the battery requires
charging.
You cannot deactivate the confirmation tone
for placing the handset in the charging cradle.
Activating/deactivating the ringtone
Activating/deactivating advisory tones
You can turn off the ringer on your handset
before you take a call or while the phone is in
the idle state. You can take a call so long as it is
displayed on the screen.
§Menu§
Deactivating the ringer
Press the star key and hold, until
P
the Ú icon appears in the display.
Re-activating the ringtone
Press and hold the star key in idle
P
status.
¢ Audio Settings ¢ Advisory Tones
Select and press §OK§ (‰ = on).
Setting the battery warning tone
§Menu§
¢ Audio Settings ¢ Battery Low
On / Off / During Call
Select and press §OK§ (‰ = on). The
battery warning tone is activated
or deactivated or sounds during a
call.
13
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / settings.fm / 19.6.06
Using the handset as an
alarm clock
Activating/deactivating the alarm clock
§Menu§
¢ Alarm Clock ¢ Activation (‰ = in)
After you activate the alarm clock, the menu for
setting the wake up time opens automatically
(page 14).
If the alarm clock is set, the wake up time
appears with the l icon in the display instead
of the date.
Setting the wake up time.
§Menu§
~
¢ Alarm Clock ¢ Wake up time
Enter the wake up time in hours
and minutes, then press §OK§.
When the alarm clock rings…
Alarm repeat after 5 minutes
§Snooze§
Press the display key or any key.
If you press §Snooze§ three times the alarm clock
switches off for 24 hours.
Switching off the alarm clock for 24 hours
§§
Press the display key.
Restoring the handset factory
settings
You can reset individual settings and changes
you have made. This will not affect entries in
the directory or the calls list, or the handset's
registration to the base.
§Menu§
§OK§
a
¢ Settings ¢ Handset ¢ Reset Handset
Press the display key to confirm.
Press and hold (idle status).
Cancel the reset with a.
14
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / appendix.fm / 19.6.06
Appendix
When it has fully dried out you will normally be
able to use it again.
Symbols and typographical
conventions used
Faults and self-help with
troubleshooting
This section explains the meaning of certain
symbols and typographical conventions that
are used in this user guide.
Not every fault is due to a defective phone. In
certain circumstances, it can come from a brief
interruption in the power supply to the base
station (unplug/plug in power supply) or if the
batteries of the handset are removed and
inserted again. The following instructions
should be of help for specific faults.
~
Enter digits or letters.
§Menu§
The display functions currently in
the bottom display line are shown
in reversed highlights. Press the
relevant display key to launch the
function.
q
Press the top or bottom of the
control key, e.g. when scrolling.
Important: problems or faults can only be remedied if you bring the complete unit (base station, handset, as well as connecting cable) to
the place of purchase.
c / Q / P etc.
The display is blank.
External Calls / Internal Calls (example)
Select one of the menu functions
(External Calls or Internal Calls) from
the list and press §OK§.
2. The battery is flat.
Charge the battery or replace it (page 5).
Press the matching key on the
handset.
§Menu§
¢ Audio Settings ¢ Ringer Melody
(example)
Press §Menu§. Select Audio Settings
with q and press §OK§. Select
Ringer Melody with q and press
§OK§.
Never use a dry cloth. This can cause static.
!
If the handset has come into contact with liquid:
Switch the handset off and remove the
batteries immediately.
Allow the liquid to drain from the handset.
Pat all parts dry, then place the handset with
the battery compartment open and the keypad facing down in a dry, warm place for at
least 72 hours (not in a microwave, oven
etc.).
Do not switch on the handset again until
it is completely dry.
¤
¥
Base flashes in the display.
1. The handset is outside the range of the base station.
Move the handset closer to the base.
¥
2. The base station is not switched on.
Check the base station mains adapter.
¥
Please Register flashes in the display.
¥
Wipe the charging cradle and the handset
with a damp cloth (do not use solvent) or an
antistatic cloth.
Contact with liquid
¥
The handset is not registered.
Register the handset (page 5).
Care
¤
1. The handset is not switched on.
Press and hold the end call key a.
Handset does not ring.
The ringtone is switched off.
Activate the ringtone (page 13).
¥
You hear an error tone when keying an input
(a descending sequence of tones).
Action has failed/invalid input.
Repeat the operation.
Watch the display and refer to the operating
instructions if necessary.
¥
¤
¤
¤
15
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / appendix.fm / 19.6.06
Warranty/Maintenance/Repair/
Authorisation
Warranty
The warranty period is 2 years as of the date of
purchase.
For warranty repair, the warranty card, filled
out and stamped by the place of purchase must
be included with the defective device.
Excluded from the warranty are damages due
to improper use, wear and tear, or tampering by
others. The warranty does not include consumed materials and deficiencies which only
affect the value or capability for use inconsiderably.
In case of an error, please contact your place of
purchase.
Repair/Maintenance
Rental devices
If your phone does not operate properly, notify
Technical Assistance (phone number 175).
Batteries
Battery cells are considered consumed material, which is not covered by the warranty service. Defective batteries are not replaced free of
charge. This applies to rental and purchased
devices.
Help
If you have any general questions about products, services, etc., please contact your
Swisscom Information Centre (toll-free number
0800 800 800).
Authorisation
This device can be used throughout the European Economic Area inc. Switzerland. Countryspecific conditions have been taken into
account.
If you have any questions about the differences
between the public phone networks, please
contact your specialist dealer or network provider.
Swisscom hereby declare that this device meets
the essential requirements and other relevant
regulations laid down in Directive 1999/5/EC.
The repair* and the fault action are free of
charge.
Purchased devices
Repair services are performed free of charge
within the warranty period in accordance with
the regulation of the warranty certificate). If a
repair is necessary, the device must be returned
to the place of purchase.
If Technical Assistance is made available (during
the warranty period as well*), the fault action is
charged (route lump sum price as well as time
expenses). The repair costs are additional outside the warranty period.
* except for damage to wearing parts (cables,
labels, batteries etc.) and damage arising
from incorrect handling such as dropping it
or allowing fluid to penetrate into handset
etc.
16
The Declaration of Conformity can be found on the following web site:
www.swisscom.com under the rubric Online
Shop, Phone, Declaration of Conformity or can be
ordered from the following postal address:
Swisscom Fixnet AG
RES-Voice
Customer Premises Equipments (CPE)
3050 Bern
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / appendix.fm / 19.6.06
u Press the hash key # three times: shows
Specifications
Recommended rechargeable batteries
(Valid at the time of going to press)
Nickel-metal-hydride (NiMH):
u Sanyo Twicell 650
u Sanyo Twicell 700
u Sanyo NiMH 800
u Panasonic 700 mAh "for DECT"
u GP 550mAh
u GP 700mAh
u GP 850mAh
u Yuasa Technology AAA Phone 600
u Yuasa Technology AAA Phone 700
u Yuasa Technology AAA 800
u VARTA Phone Power AAA 700mAh
The handset is supplied with two recommended batteries.
Handset operating times/charging times
The following information relates to batteries
with a capacity of 650mAh.
Standby time
approx 130 hours (5 days)
Calling time
approx. 13 hours
Charging time
approx. 6 hours
The operating and charging times apply only
when using the recommended batteries.
General specifications
the selection line of the characters assigned
to the hash key.
u The first letter of a directory entry name is
automatically capitalised and is followed by
lower case letters.
Editing text
When you press and hold a key, the characters
of that key appear in the bottom display line
and are highlighted one after the other. When
you release the key the highlighted character is
inserted into the input field. For how to enter
special characters, see page 18.
The display briefly shows whether upper or
lower case letters or digits is selected when you
switch from one mode to the next: the bottom
text line displays "abc -> Abc", "Abc -> 123" or
"123 -> abc".
Order of directory entries
The directory entries are usually sorted in
alphabetical order. Spaces and digits take first
priority. The sort order is as follows:
1. Space (shown here as s)
2. Digits (0–9)
3. Letters (alphabetical)
4. Other characters
To get round the alphabetical order of the
entries, insert a space or a digit in front of the
name. These entries will then move to the
beginning of the directory. Names which you
have preceded with an asterisk will move to the
end of the directory.
Dimensions, handset 140 x 53 x 28 mm
(L × W × H)
Weight of handset
with battery
116 g
Writing and editing text
The following rules apply when writing a text:
u The cursor is controlled with t s.
u Characters are added to the left of the cursor.
u Press the hash key # briefly to switch from
"Abc" mode to "123", from "123" to "abc",
and from "abc" to "Abc" (upper case: 1st letter upper case, all others lower case). Press
the hash key # before entering the letter.
17
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / appendix.fm / 19.6.06
Entering special characters
Standard characters
1
Q
#
*)
**)
1x
Space
Space
.
*
Abc-->
123
2x
1
Â
,
/
123 -->
3x
£
1
?
(
#
4x
$
â
!
)
@
5x
¥
£
0
<
\
6x
¤
abc
$
+
=
&
7x
¥
-
>
§
8x
¤
:
%
9x
¿
10x
¡
11x
“
12x
‘
13x
;
14x
_
*) Directory and other lists
**) When writing an SMS
18
P
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / accessories_SAG.fm / 18.5.06
Accessories
Aton CL100 Handsets
Upgrade your Aton CL100 to a cordless PABX:
u
u
u
u
u
u
u
u
Illuminated colour display (4096 colours)
Various different screensavers
Illuminated keypad
Handsfree operation
Polyphonic ringer melodies
Phonebook for around 100 entries
Alarm clock
Headset connection incl. headset
CL100 / CL300 charging station
(incl. mains adapter)
Only use original accessories. This will avoid possible health risks and damage, and also ensure that
all the relevant regulations are complied with.
19
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / C45_SIX.fm / 18.5.06
Index
Numerics
24 hours in advance (alarm clock) . . . . . . 14
A
Accessories . . . . . .
Activating
advisory tones . .
auto answer . . . .
handset . . . . . .
handsfree talking
muting ringtone .
Advisory tones . . . .
Alarm clock . . . . . .
Alarm repeat . . . . .
Auto answer . . . . .
. . . . . . . . . . . . . . . 19
. . . . . . . . . . . . . . . 13
. . . . . . . . . . . . . . . 12
................7
................9
. . . . . . . . . . . . . . . 13
. . . . . . . . . . . . . . . 13
. . . . . . . . . . . . . . . 14
. . . . . . . . . . . . . . . 14
. . . . . . . . . . . . . 9, 12
B
Batteries
charging . . . . . . . . . . .
inserting . . . . . . . . . . .
recommended batteries .
warning tone . . . . . . . .
Battery
display . . . . . . . . . . . .
Battery icon . . . . . . . . . .
Belt clip . . . . . . . . . . . . .
...........5
...........4
. . . . . . . . . . 17
. . . . . . . . . . 13
...........1
...........5
...........8
C
Call
answering . . . . . . . . . . . . .
ending . . . . . . . . . . . . . . .
external . . . . . . . . . . . . . .
Call acceptance . . . . . . . . . . .
Care, phone . . . . . . . . . . . . .
Charge level display . . . . . . . .
Charge status (battery) . . . . . .
Colour scheme . . . . . . . . . . .
Confirmation tone . . . . . . . . .
Connecting the charging cradle.
Connection socket for headset .
Contrast . . . . . . . . . . . . . . . .
Control key . . . . . . . . . . . . . .
Correcting incorrect input . . . .
Customer Care . . . . . . . . . . . .
........9
........9
........8
. . . . . . . 12
. . . . . . . 15
........5
........1
. . . . . . . 12
. . . . . . . 13
........5
. . . . . . 1, 8
. . . . . . . 12
. . . . . . 1, 7
........8
. . . . . . . 16
D
Deactivating
advisory tones . .
auto answer . . . .
handset . . . . . .
handsfree talking
muting ringtone .
Deleting characters.
20
. . . . . . . . . . . . . . . 13
. . . . . . . . . . . . . . . 12
................7
................9
. . . . . . . . . . . . . . . 13
................8
Dialling
directory . . . . . . . . . . . .
last number redial list . . . .
Digital clock . . . . . . . . . . . .
Directory . . . . . . . . . . . . . .
copying number from text .
opening . . . . . . . . . . . . .
order of entries . . . . . . . .
select an entry. . . . . . . . .
send entry/list to handset .
storing entry . . . . . . . . . .
storing the first number . .
using to enter numbers . . .
Display
changing display language .
colour scheme . . . . . . . . .
contrast . . . . . . . . . . . . .
illumination . . . . . . . . . .
in idle status . . . . . . . . . .
keys . . . . . . . . . . . . . . .
screensaver. . . . . . . . . . .
setting . . . . . . . . . . . . . .
Display keys . . . . . . . . . . . .
E
Earpiece mode .
Earpiece volume
End call key . . .
Ending, call . . .
Error tone . . . .
. . . . . . . . .10
. . . . . . . . .11
. . . . . . . . .12
. . . . . . . . .10
. . . . . . . . .11
......... 7
. . . . . . . . .17
. . . . . . . . .10
. . . . . . . . .10
. . . . . . . . .10
. . . . . . . . .10
. . . . . . . . .11
. . . . . . . . .12
. . . . . . . . .12
. . . . . . . . .12
. . . . . . . . .12
......... 1
......... 1
. . . . . . . . .12
. . . . . . . . .12
......... 7
.................. 9
. . . . . . . . . . . . . . . . . .12
. . . . . . . . . . . . . . .1, 8, 9
.................. 9
. . . . . . . . . . . . . . . . . .13
F
FAQs . . . . . . . . . . . . . . . . . . . . . . . . . .15
H
Handset
activating . . . . . . . . . . . . . .
advisory tones . . . . . . . . . . .
contact with liquid . . . . . . . .
deactivating . . . . . . . . . . . .
display language . . . . . . . . .
idle status . . . . . . . . . . . . . .
loudspeaker volume . . . . . . .
operating and charging times .
overview . . . . . . . . . . . . . .
preparing to use . . . . . . . . .
registering . . . . . . . . . . . . .
restoring factory settings . . . .
setting (individual) . . . . . . . .
Handset charging times . . . . . .
Handset operating time . . . . . .
Handsfree
key . . . . . . . . . . . . . . . . . .
Handsfree talking . . . . . . . . . .
Hash key . . . . . . . . . . . . . . . .
Headset. . . . . . . . . . . . . . . . .
Hearing aids . . . . . . . . . . . . . .
....... 7
. . . . . . .13
. . . . . . .15
....... 7
. . . . . . .12
....... 7
. . . . . . .12
. . . . . . .17
....... 1
....... 4
....... 5
. . . . . . .14
. . . . . . .12
. . . . . . .17
. . . . . . .17
....... 1
....... 9
....... 1
. . . . . .1, 8
....... 3
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / C45_SIX.fm / 18.5.06
I
Idle status (display) . . . . . .
Illumination . . . . . . . . . .
Incorrect input (correction)
Info tones . . . . . . . . . . . .
K
Key click . . . . . . . . . . . . .
Keys
assigning directory entry
Control key . . . . . . . . .
control key . . . . . . . . .
display keys . . . . . . . . .
end call key . . . . . . . . .
handsfree key . . . . . . .
hash key . . . . . . . . . . .
message key . . . . . . . .
On/Off key . . . . . . . . . .
recall key . . . . . . . . . . .
speed dial . . . . . . . . . .
star key . . . . . . . . . . . .
talk key . . . . . . . . . . . .
. . . . . . . . . 1, 7
. . . . . . . . . . 12
...........8
. . . . . . . . . . 13
. . . . . . . . . . 13
. . . . . . . . . . 10
...........7
...........1
. . . . . . . . . 1, 7
. . . . . . . 1, 8, 9
...........1
...........1
...........1
...........1
...........1
. . . . . . . . . . 10
. . . . . . . . 1, 13
. . . . . . . . . 1, 8
L
Last number redial . . . . . . . . . . . . . . . . 11
Liquid . . . . . . . . . . . . . . . . . . . . . . . . 15
Loudspeaker volume . . . . . . . . . . . . . . . 12
M
Mains adapter . . . . . . .
Making calls
answering a call . . . .
external . . . . . . . . .
Medical appliances . . . .
Menu
end tone . . . . . . . . .
menu guidance . . . .
Message
key . . . . . . . . . . . .
Message key . . . . . . . .
opening lists . . . . . .
Muting the first ringtone
.............3
.............9
.............8
.............3
. . . . . . . . . . . . 13
.............7
.............1
.............1
. . . . . . . . . . . . 11
. . . . . . . . . . . . 13
Q
Questions and answers. . . . . . . . . . . . . .15
R
Recall key . . . . .
Ringtone
muting . . . . .
setting melody
setting volume
S
................. 1
. . . . . . . . . . . . . . . . .13
. . . . . . . . . . . . . . . . .13
. . . . . . . . . . . . . . .7, 12
Safety precautions . . . . . . .
Screensaver . . . . . . . . . . .
screensaver see screensaver
Setting date . . . . . . . . . . .
Setting melody (ringtone) . .
Setting time . . . . . . . . . . .
Setting volume
earpiece . . . . . . . . . . . .
handset loudspeaker . . .
loudspeaker . . . . . . . . .
ringtone . . . . . . . . . . . .
Setting wake up time . . . . .
Signal strength . . . . . . . . .
Snooze (alarm clock) . . . . .
Special characters . . . . . . .
Specifications . . . . . . . . . .
Speed dial . . . . . . . . . . . .
Star key . . . . . . . . . . . . . .
Symbols . . . . . . . . . . . . .
T
Talk key . . . . . .
Text
editing . . . . .
writing . . . . .
Troubleshooting
. . . . . . . . .3, 4
. . . . . . . . . .12
.......... 6
. . . . . . . . . .13
.......... 6
. . . . . . . . . .12
. . . . . . . . . .12
. . . . . . . . . .12
. . . . . . . . . .12
. . . . . . . . . .14
.......... 1
. . . . . . . . . .14
. . . . . . . . . .18
. . . . . . . . . .17
. . . . . . . . . .10
. . . . . . . .1, 13
. . . . . . . . . .15
. . . . . . . . . . . . . . . . .1, 8
. . . . . . . . . . . . . . . . . .17
. . . . . . . . . . . . . . . . . .17
. . . . . . . . . . . . . . . . . .15
W
Warning tone (batteries) . . . . . . . . . . . . .13
N
Number
copying from directory . . . . . . . . . . . . 11
storing in the directory . . . . . . . . . 10, 11
O
On/Off key . . . . . . . . . . . . . . . . . . . . . . 1
Operation (preparing to use the handset) . . 4
Order of entries in directory . . . . . . . . . . 17
P
Pack contents . . . . . . . . . . . . . . . . . . . . 4
Preparing to use (handset) . . . . . . . . . . . . 4
21
Gigaset C45 / SWZ PTT en / A31008-M1753-F151-1-2x19 / montage_charger.fm / 18.5.06
23
Download PDF