Samsung | LN52A860S2F | Setup guide | Samsung LN52A860S2F Setup guide

Quick Setup Guide
STOP
LN46A850S1F/LN52A850S1F
LN46A860S2F/LN52A860S2F
Please do not return
this unit
If you are having problems operating
this TV,
Please call;
1-800-SAMSUNG (1-800-726-7864)
For web support please visit
www.samsung.com/support
1-800-SAMSUNG (7267864)
Samsung Electronics America, Inc.
105 Challenger Road Ridgefield Park, NJ 07660-0511
Samsung Electronics Canada Inc., Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2
Call center hours of operation (Mon-Sun 9AM-12AM EST).
To register this product please visit
www.samsung.com/global/register.
Rear Panel / Side Panel Jacks (depending on the model)
[LN46A850S1F/LN52A850S1F]
[LN46A860S2F/LN52A860S2F]
HDMI IN4
HDMI IN4
1 AUDIO OUT
5 ANT IN
0 S-VIDEO
2 DIGITAL AUDIO OUT (OPTICAL)
6 WISELINK
! COMPONENT IN 1, 2 / AV IN 1
3 PC IN [PC] / [AUDIO]
7 AV IN 2
@LAN
4HDMI IN 1, 2, 3, 4 /
8
#EX-LINK
DVI IN(HDMI2)[R-AUDIO-L]
HEADPHONE
9 POWER INPUT
Video Input Performance Comparison
$KENSINGTON LOCK
Audio Output Performance Comparison
/
HDMI/DVI
Best
OPTICAL (Digital)
Best
/
PC/COMPONENT
Better
AUDIO (Analog)
Normal
S-VIDEO
Good
VIDEO
Normal
English-
BN68-01692A-Eng.indd 1
2008-07-18 �� 10:06:41
Remote Control
See “Remote Control” in the owner’s instructions for details.
1 POWER
Turns the TV on and off.
& PRE-CH
Tunes to the previous channel.
2TV
Selects the TV mode directly.
* CH / CH
Press to change channels.
1
3 NUMERIC BUTTONS
Press to directly select the
channel.
( SOURCE
Press to display and select the
available video sources.
2
4
) W.LINK (WISELINK)
This function enables you to view
and play photo and music files
from an external device.
ress to select additional
P
channels (digital and analog)
being broadcast by the same
station. For example, to select
channel “54-3”, press “54”, then
press “ ” and “3”.
5
(MUTE)
Press to temporarily cut off the
sound.
6 VOL – / VOL +
Press to increase or decrease
the volume.
7 CH LIST
Used to display Channel Lists on
the screen.
8 TOOLS
Use to quickly select frequently
used functions.
9 INFO
Press to display information on
the TV screen.
!
@
#
$
%
TV
VCR
^
DVD
DVD
STB
%
^
3
4
5
&
b RETURN
Returns to the previous menu.
6
*
7
(
)
a
c U
P▲ / DOWN▼ / LEFT◄ /
RIGHT► / ENTER
Press the Up/Down/Left/Right
sections of the wheel button and
Enter to select on-screen menu
items and change menu values.
You can navigate up and down
the menu, switch channels and
adjust the volume by turning the
wheel button.
d EXIT
Press to exit the menu.
8
b
c
9
d
0
e
f
g
h
!
@
#
$
SET
RESET
i
STB
TV
BN68-01692A-Eng.indd 2
VCR
a MENU
Displays the main on-screen
menu.
e DMA (Digital Media Adapter)
Use this when connecting a
SAMSUNG DMA device through
an HDMI interface and switching
to DMA mode.
CC
For more information on the
Controls the caption decoder.
operating procedures, refer to the
user manual of the DMA.
E.MODE
This button is available when
Press to select the preset display
“Anynet+(HDMI-CEC)” is “On”.
and sound modes for sports,
cinema and games.
f INFO.L
Use these buttons in the DMA,
Press to use the News, Stock
WISELINK and Anynet+ modes.
Market and Weather Forecast
(
: This remote can be
information services available
used to control recording on
over Samsung’s network.
Samsung recorders with the
+
Anynet feature)
g FAV.CH
Press to switch to your favorite
SET
channels.
Sets the remote to control your
TV, VCR, DVD or Set-Top Box
h CONTENT
This function enables you to view
MODE
“Content Library”.
Press to operate your TV, DVD,
STB or VCR.
i RESET
When your remote does not
ON/OFF
work, change the batteries and
Press to backlight the buttons
press the RESET button for 2-3
on the remote. This function is
seconds before use.
convenient for using at night or
when the room is dark. (Using
the remote control with the
ON/OFF light button set to On
will reduce the battery usage
time.)
English-
0 COLOR BUTTONS
Use these buttons in the Channel
list, WISELINK, etc.
TV
VCR
DVD
STB
2008-07-18 �� 10:06:42
Connecting a DVD/Blu-Ray player or Cable Box/Satellite receiver (Set-Top Box) via HDMI
TV Side Panel
TV Rear Panel
1
HDMI IN4
Connect an HDMI Cable between
the HDMI IN (1, 2, 3 or 4) jack
on the TV and the HDMI jack on
the DVD/Blu-Ray player or Cable
Box/Satellite receiver (Set-Top
Box).
What is HDMI?
•HDMI(High-Definition Multimedia
Interface), is an interface that enables the
transmission of digital audio and video
signals using a single cable.
DVD/Blu-Ray player or Cable Box/
Satellite receiver (Set-Top Box)
•The difference between HDMI and DVI
is that the HDMI device is smaller in
size and has the HDCP (High Bandwidth
Digital Copy Protection) coding feature
installed. DVI also requires a separate
audio connection (see below).
or
1
HDMI Cable (Not supplied)
➣ Each DVD/Blu-Ray player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration.
➣ The TV may not output sound and pictures may be displayed with abnormal color when DVD/Blu-Ray players/Cable Boxes/
Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there
is no sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on
the back of the TV. If this happens, contact the company that provided the DVD/Blu-Ray player/Cable Box/Satellite receiver to
confirm the HDMI version, then request an upgrade.
➣ HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
Connecting a DVD/Blu-Ray player or Cable Box/Satellite receiver (Set-Top Box) via DVI
TV Rear Panel
DVD/Blu-Ray player or Cable Box/
Satellite receiver (Set-Top Box)
2
Audio Cable (Not supplied)
1
DVI to HDMI Cable (Not supplied)
1
Connect a DVI to HDMI Cable or
DVI-HDMI Adapter between the
HDMI IN 2 jack on the TV and the
DVI jack on the DVD/Blu-Ray player
or Cable Box/Satellite receiver (SetTop Box).
2
Connect Audio Cables between the
DVI IN (HDMI 2) [R-AUDIO-L] jack on
the TV and the DVD/Blu-Ray player or
Cable Box/Satellite receiver (Set-Top
Box).
➣ Each DVD/Blu-Ray player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration.
➣ When connecting a DVD/Blu-Ray player or Cable Box/Satellite receiver (Set-Top Box), match the color of the connection
terminal to the cable.
➣ When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
English-
BN68-01692A-Eng.indd 3
2008-07-18 �� 10:06:45
Connecting a DVD/Blu-Ray player or Cable Box/Satellite receiver
(Set-Top Box) via Component cables
1
TV Rear Panel
Component Cable
(Not supplied)
Connect Audio Cables between the
COMPONENT IN(1 or 2) [R-AUDIO-L]
jacks on the TV and the AUDIO OUT
jacks on the DVD/Blu-Ray player or
Cable Box/Satellite receiver (Set-Top
Box).
➣ Component video separates the video
into Y (Luminance (brightness)), Pb
(Blue) and Pr (Red) for enhanced video
quality. Be sure to match the component
video and audio connections.
For example, if connecting a Component
video cable to COMPONENT IN 1,
connect the audio cable to
COMPONENT IN 1 also.
Audio Cable (Not supplied)
➣ Each DVD/Blu-Ray player or Cable Box/
Satellite receiver (Set-Top Box) has a
different back panel configuration.
DVD/Blu-Ray player or Cable Box /
Satellite receiver (Set-Top Box)
1
2
Connect a Component Cable between
the COMPONENT IN (1 or 2)
[Y, PB, PR] jacks on the TV and the
COMPONENT [Y, PB, PR] jacks on
the DVD/Blu-Ray player or Cable Box/
Satellite receiver (Set-Top Box).
2
➣ When connecting a DVD/Blu-Ray player
or Cable Box/Satellite receiver (Set-Top
Box), match the color of the connection
terminal to the cable.
Connecting a Camcorder
TV Side Panel
HDMI IN4
Camcoder
1
Video Cable (Not supplied)
2
Audio cable (Not supplied)
1
Connect a Video Cable between
the AV IN 2 [VIDEO] jack on the TV
and the VIDEO OUT jack on the
camcorder.
2
Connect Audio Cables between the
AV IN 2 [R-AUDIO-L] jacks on the
TV and the AUDIO OUT jacks on the
camcorder.
➣ Each Camcorder has a different back
panel configuration.
➣ When connecting a Camcorder, match
the color of the connection terminal to
the cable.
English-
BN68-01692A-Eng.indd 4
2008-07-18 �� 10:06:46
Connecting a VCR
Video Connection
TV Side Panel
TV Rear Panel
VCR Rear Panel
HDMI IN4
1
Unplug the cable or antenna
from the back of the TV.
2
Connect the cable or antenna
to the ANT IN terminal on the
back of the VCR.
3
4
3
RF Cable
(Not supplied)
5
Audio Cable
(Not supplied)
4
Video Cable
(Not supplied)
5
Connect an RF Cable between
the ANT OUT terminal on the
VCR and the ANT IN terminal
on the TV.
Connect a Video Cable
between the VIDEO OUT jack
on the VCR and the AV IN 1
[Y/VIDEO] or AV IN 2 [VIDEO]
jack on the TV.
Connect Audio Cables between
the AUDIO OUT jacks on the
VCR and the AV IN 1 (or AV IN 2)
[R-AUDIO-L] jacks on the TV.
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
➣ Each VCR has a different back panel configuration.
➣ When connecting a VCR, match the color of the connection terminal to the cable.
➣ When connecting to AV NI 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable
(Yellow).
➣ If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of
the TV. Alternatively, connect the cable to the “R” jack. If your VCR is stereo, you must connect two cables.
S-Video Connection
1
To begin, follow steps 1–3 in the
previous section to connect the
antenna or cable to your VCR
and your TV.
2
Connect an S-Video Cable
between the S-VIDEO OUT jack
on the VCR and the [S-VIDEO]
jack on the TV.
3
Connect Audio Cables between
the AUDIO OUT jacks on the VCR
and the AV IN 1 [R-AUDIO-L]
jacks on the TV.
TV Rear Panel
VCR Rear Panel
3
Audio Cable
(Not supplied)
2
S-Video Cable
(Not supplied)
1
RF Cable
(Not supplied)
An S-Video cable may be included
with a VCR. (If not, check your local
electronics store.)
➣ Each VCR has a different back
panel configuration.
➣ When connecting a VCR, match
the color of the connection
terminal to the cable.
English-
BN68-01692A-Eng.indd 5
2008-07-18 �� 10:06:48
Connecting a Digital Audio System
1
TV Rear Panel
Digital Audio System
Connect an Optical Cable between
the “DIGITAL AUDIO OUT
(OPTICAL)” jacks on the TV and
the Digital Audio Input jacks on the
Digital Audio System.
When a Digital Audio System is
connected to the “DIGITAL AUDIO
OUT (OPTICAL)” jack: Decrease
the volume of the TV and adjust
the volume level with the system’s
volume control.
1
➣ 5.1CH audio is possible when the TV
is connected to an external device
supporting 5.1CH.
Optical Cable (Not supplied)
➣ Each Digital Audio System has a
different back panel configuration.
➣ When the receiver (home theater) is
set to On, you can hear sound output
from the TV’s Optical jack. When the
TV is displaying a DTV(air) signal, the
TV will send out 5.1 channel sound to
the Home theater receiver. When the
source is a digital component such as
a DVD and is connected to the TV via
HDMI, only 2 channel sound will be
heard from the Home Theater receiver.
If you want to hear 5.1 channel audio,
connect the DIGITAL AUDIO OUT
(OPTICAL) jack on the DVD/Blu-Ray
player or Cable/Satellite Box directly
to an Amplifier or Home Theater, not
the TV.
Connecting an Amplifier/DVD Home Theater
1
TV Rear Panel
Amplifier/DVD Home Theater
Connect Audio Cables between the
AUDIO OUT [R-AUDIO-L] jacks on
the TV and AUDIO IN [R-AUDIO-L]
jacks on the Amplifier/DVD Home
Theater.
When an audio amplifier is connected
to the “AUDIO OUT [R-AUDIO-L]”
jack: Decrease the volume of the TV
and adjust the volume level with the
Amplifier’s volume control.
➣ Each Amplifier/DVD Home Theater has
a different back panel configuration.
1
➣ When connecting an Amplifier/DVD
Home Theater, match the color of the
connection terminal to the cable.
Audio Cable (Not supplied)
English-
BN68-01692A-Eng.indd 6
2008-07-18 �� 10:06:50
Connecting a PC
Using the D-Sub Cable
Using the D-Sub Cable
TV Rear Panel
1
Connect a D-Sub Cable between
PC IN [PC] connector on the TV and
the PC output connector on your
computer.
2
Connect a PC Audio Cable between
the PC IN [AUDIO] jack on the TV
and the Audio Out jack of the sound
card on your computer.
PC
1
D-Sub Cable
(Not supplied)
2
PC Audio Cable
(Not supplied)
Using the HDMI/DVI Cable
Using the HDMI/DVI Cable
TV Rear Panel
PC
1
2
HDMI/DVI Cable
(Not supplied)
3.5 mm Stereo mini-plug/
2RCA Cable (Not supplied)
1
Connect an HDMI/DVI cable between
the HDMI IN 2 jack on the TV and
the PC output jack on your computer.
2
Connect a 3.5 mm Stereo miniplug/2RCA Cable between the DVI
IN(HDMI2) [R-AUDIO-L] jack on the
TV and the Audio Out jack of the
sound card on your computer.
➣ Each PC has a different back panel
configuration.
➣ When connecting a PC, match the
color of the connection terminal to the
cable.
➣ When using an HDMI/DVI cable
connection, you must use the HDMI
IN 2 terminal.
English-
BN68-01692A-Eng.indd 7
2008-07-18 �� 10:06:53
Turning the TV On and Off
4
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
Viewing the Menus
When selecting the Cable TV system: Press the
ENTER
button to start the auto program.
Press the ▲,▼, ◄ or ► to select the correct analog
signal cable system source among “STD”, “HRC”,
and “IRC”. Press the ▲ or ▼ button to select “Start”,
then press the ENTER
button. If you have Digital
cable TV, select the cable system signal source for
both Analog and Digital.
Auto Program
Selects the cable system.
Analog
STD
HRC
IRC
Digital
STD
HRC
IRC
Start
Enter
Move
5
1
With the power on, press the MENU button.
The main menu appears on the screen.
The menu’s left side has icons: Picture, Sound,
Channel, Setup, Input, Application.
2
Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER
button to access the
icon’s sub-menu. Press the EXIT button to exit.
2
Press the ▲ or ▼ button to select “Auto Program”,
then press the ENTER
button.
3
Press the ▲ or ▼ button to select the antenna
connection, then press the ENTER
button.
Enter
DVD
STB
Auto Program
Removing scrambled channel.
DTV Cable 41
77%
DTV Cable : 16 Cable : 45
Return
Press the MENU button while the Auto Program function is
being executed. You can also press the ENTER
button
to stop the setup.
Auto Program
Move
VCR
To Stop the Auto Program Function
Select the Antenna source to memorize.
Start
Return
Enter
TV
➣ After all the available channels are stored, it
starts to remove scrambled channels. The Auto
program menu then reappears.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Channel”, then
press the ENTER
button.
Start
Stop
Enter
1
Auto
Cable 38
50%
Stop
Storing Channels in Memory
(Automatic Method)
Start
Auto Program
DTV Cable : 12 Cable : 32
➣ The on-screen menus disappear from the
screen after about one minute.
Cable
The TV begins memorizing all available stations.
Press the EXIT button to exit.
Auto Program in Progress.
➣ To move
to aRESET
lower menu, turn the wheel
SET
clockwise when the menu Display is displayed.
To move to a higher menu, turn the wheel
counterclockwise.
Air
Return
Checking to see if Channels were Stored in Memory
Press the CH button. Only the channels stored in memory
will be selected (in order).
Return
Selecting the antennas
• Air: “Air” antenna signal.
• Cable: “Cable” antenna SET
signal. RESET
• Auto: “Air” and “Cable” antenna signals.
English-
BN68-01692A-Eng.indd 8
2008-07-18 �� 10:06:54
Setting the Channel List
Picture Mode
You can delete or add a channel to display the channels
you want.
1
Press the MENU button. Press the ▲ or ▼ button to
select “Channel”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Channel List”,
then press the ENTER
button.
2
Press the ◄ button to select “Added Channels”.
Press the ▲ or ▼ button to select “All Channels”.
Press the ENTER
button.
3
Press the ▲ or ▼ button to select a channel to
delete, then press the TOOLS button. Press the
ENTER
button to select “Delete”.
4
Press the ▲ or ▼ button to select a channel to add,
then press the TOOLS button. Press the ENTER
button to select “Add”.
All Channels
2
Air
4
Air
Add to Favorite
8
Air
Timer Viewing
13
Air
13-1 ♥ TV #3
Air  Antenna
 Zoom
Customizing the Picture Settings
Your television has several setting options that allow you to
control the picture quality.
1
To select the desired picture mode, follow the
“Changing the Picture Standard” instructions
numbers 1 and 2.
2
Press the ▲ or ▼ button to select “Backlight”,
“Contrast”, “Brightness”, “Sharpness”, “Color” or
“Tint(G/R)”, then press the ENTER
button.
3
ress the ◄ or ► button to decrease or increase
P
the value of a particular item. Press the EXIT button
to exit.
Delete
♥ TV #8
4-2 •D
ynamic: Selects the picture for high-definition in a bright
room.
•S
tandard: Selects the picture for the optimum display in a
normal environment.
•M
ovie: Selects the picture for viewing movies in a dark
room.
Channel Name Edit
Select All
Alice’s Adventures in Wonderland
➣ W
hen you make changes to “Backlight”,
“Contrast”, “Brightness”, “Sharpness”, “Color”
or “Tint(G/R)”, the OSD will be adjusted
accordingly.
Auto Program
Option
 Select
➣ In PC mode, you can only make changes to
“Backlight”, “Contrast” and “Brightness”.
Changing the Picture Standard
You can select the type of picture which best corresponds
to your viewing requirements.
2
Press the ENTER
button to select “Mode”.
Press the ▲ or ▼ button to select “Dynamic”,
“Standard” or “Movie”.
Press the ENTER
button.
Picture
1
Press the MENU button to display the menu.
Press the ENTER
button, to select “Picture”.
➣ Settings can be adjusted and stored for each
external device you have connected to an input
of the TV.
Mode
: Standard
Backlight
:7
Contrast
: 95
Brightness
: 45
Sharpness
: 50
Color
: 50
Tint (G/R)
: G50/R50
Detailed Settings
Picture Options
Picture
Mode
:Dynamic
Backlight
: 7 Standard
Contrast
: 95Movie
Brightness
Dynamic
►
Backlight
Move
7
Adjust
Enter
Return
: 45
Sharpness
: 50
Color
: 50
Tint (G/R)
: G50/R50
Picture Adjustment
Detailed Settings
•B
acklight: Adjusts the brightness of LCD back light.
•C
ontrast: Adjusts the contrast level of the picture.
•B
rightness: Adjusts the brightness level of the picture.
•S
harpness: Adjusts the edge definition of the picture.
•C
olor: Adjusts color saturation of the picture.
•T
int(G/R): Adjusts the color tint of the picture.
English-
BN68-01692A-Eng.indd 9
2008-07-18 �� 10:06:54
To Select the Source
Source List
TV
AV1 ----
AV2 ----
S-Video
----
Component1
----
Component2
Refresh
---Option
Press the SOURCE button on the Remote Control
You can select the TV mode or an input source connected to the TV set. Use this button to choose an input source that you
would like to watch.
➣ Available signal sources: TV, AV1, AV2, S-Video, Component1, Component2, PC, HDMI1, HDMI2/DVI, HDMI3, HDMI4,
USB, DLNA.
➣ You can choose only those external devices that are connected to the TV. In the “Source List”, connected inputs will be
highlighted and sorted to the top. Inputs that are not connected will be sorted to the bottom.
➣ Using the Color buttons on the remote with the Source list
• Red (Refresh): Refreshes the connecting external devices.
• TOOLS (Option):
Displays
the “Edit Name” and “Information” menus.
SET
RESET
English-10
BN68-01692A-Eng.indd 10
2008-07-18 �� 10:06:54
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, call Samsung customer service at 1-800-SAMSUNG.
Problem
Possible Solution
Poor picture
Try another channel. / Adjust the antenna. / Check all wire connections.
Poor sound quality.
Try another channel. / Adjust the antenna.
No picture or sound.
Try another channel. / Press the SOURCE button. /
Make sure the TV is plugged in. / Check the antenna connections.
No sound or sound is too low at maximum
volume.
First, check the volume of units connected to your TV (digital broadcasting
receiver, DVD, cable broadcasting receiver, VCR, etc.). Then, adjust the TV
volume accordingly.
Picture rolls vertically.
Check all wire connections.
There is a problem with the picture.
Run the Picture test in the Self diagnostic menu.
There is a problem with the sound.
Run the Sound test in the Self diagnostic menu.
The TV operates erratically.
Unplug the TV for 30 seconds, then try operating it again.
The TV won’t turn on.
Make sure the wall outlet is working.
Remote control malfunctions
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
“Check signal cable” message.
Ensure that the signal cable is firmly connected to the PC source.
“Not Supported Mode” message.
Check the maximum resolution and connected device’s Video frequency.
Compare these values with the data in the Display Modes.
Digital broadcasting screen problem.
Please check the digital signal strength and input antenna.
The image is too light or too dark.
Adjust the Brightness and Contrast. / Adjust the Fine tuning.
Black bars on the screen.
Make sure the broadcast you’re receiving is High Definition (HD).
HD channels sometimes broadcast Standard Definition (SD) programming, which
can cause black bars.
Set your cable/satellite box to stretch or widescreen mode to eliminate the bars.
Picture has a Red/Green or Pink tint.
Make sure the Component cables are connected to the correct jacks.
Closed Captioning not working.
If you are using a Cable/Satellite box, you must set Closed Captioning on the box,
not your TV.
Snowy picture.
Your cable box may need a firmware upgrade. Please contact your Cable
company.
Ghosting on picture
This is sometimes caused by compatibility issues with your cable box.
Try connecting Component cables instead.
Horizontal bars appear to flicker, jitter or
shimmer on the image.
Adjust the Coarse tuning and then adjust the Fine tuning.
Vertical bars appear to flicker, jitter or
shimmer on the image.
Adjust the Coarse tuning and then adjust the Fine tuning.
Screen is black and power indicator light
blinks steadily.
On your computer check: Power, Signal Cable.
The TV is using its power management system.
Move the computer's mouse or press any key on the keyboard.
Image is not centered on the screen.
Adjust the horizontal and vertical position.
The screen position must be adjusted on the output source (i.e. STB) with a
digital signal.
The picture appears distorted in the
corner of the screen.
If "Just Scan" is selected with some external devices, the picture may appear
distorted in the corner of the screen. This symptom is caused by the external
devices, not TV.
The 'Resets all settings to the default
values' message appears.
This appears when you press and hold the EXIT button for a while. The product
settings are reset to the factory defaults.
You may see small particles if you
look closely at the edge of the bezel
surrounding the TV screen.
This is part of the product's design and is not a defect.
English-11
BN68-01692A-Eng.indd 11
2008-07-18 �� 10:06:55
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
Contacte con SAMSUNG WORLDWIDE
Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al
Cliente.
Country
Customer Care Center
Web Site
CANADA
1-800-SAMSUNG(726-7864)
www.samsung.com/ca
U.S.A
1-800-SAMSUNG(726-7864)
www.samsung.com
Address
Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga,
Ontario L5R 4B2 Canada
Samsung Electronique Canada Inc.,
Service à la Clientèle 55 Standish Court
Mississauga, Ontario L5R 4B2 Canada
Samsung Electronics America, Inc.
105 Challenger Road
Ridgefield Park, NJ 07660-0511
BN68-01692A-00
BN68-01692A-Eng.indd 12
2008-07-18 �� 10:06:55
Download PDF