EverFocus | EAN Plus Series | Installation guide | EverFocus EAN Plus Series Installation guide

EAN Plus Series
IP Box Camera
Quick Installation Guide
** Lens not included.
Copyright © EverFocus Electronics Corp,
Release Date: October, 2012
EAN Plus Series
1. Overview
The EAN Plus Series is a box type IP camera designed for indoor use. The series comes in four
models: EAN3120 Plus / 3220 Plus / 3300 Plus.
Model Name
Megapixel
WDR
EAN3120 Plus
1.3 MP
Yes
EAN3220 Plus
2 MP
Yes
EAN3300 Plus
3 MP
No
1
2
3
4
5
6
7
8
9
10
11
No. Item Name
Descriptions
1
Memory Card Slot
Insert a micro SD / SDHC card to store recording data.
2
Power LED
Indicates the power is supplied.
3
DC 12V Port
Connects to power.
4
Ethernet / PoE
Connects to a 10/100 Ethernet or PoE.
5
Reset Button
Resets all configurations to factory default.
6
I/O Terminal Block
Connects I/O devices.
7
Video Out
Connects to a portable monitor for setting the focus and angle
of the camera during initial installation.
8
Audio In
Connects a microphone for audio input. Note that microphones
with external power supplies are required.
9
Audio Out
Connects a speaker for audio output.
10
Light Sensor
Detects lights.
11
Auto Iris Lens Connector
Plug the iris control cable to the connector.
1
EAN Plus Series
System Requirements
Before installing, please check that your computer meets the following system requirements.
Operating System
Microsoft Windows XP / Vista (32-bit) / 7 (32-bit)
CPU
Intel Core2 Duo 2 GHz or higher
RAM
1 GB or more
Additional HD space depends on required local storage of video files,
100 Mbps network card.
Screen Resolution
1024 x 768 pixels or higher, 32-bit pixel color resolution
Software
DirectX 9.0c
Microsoft Internet Explorer 7 or higher
Packing List
•
•
•
•
EAN Plus Series Camera (lens not included) x 1
Software CD x 1
Quick Installation Guide x 1
Tool Packet x 1 (contains the following items)
- C-mount lens adapter
- ¼-20 UNC thread mounting bracket and 2 screws
-
Hexagon wrench
-
Power pigtail cable
Note: Contact the shipper if any items appear to have been damaged in the shipping process. If any
items are missing, notify your EverFocus Electronics Corp. Sales Representative or Customer Service
Branch. Please also keep the shipping carton for possible future use.
2
EAN Plus Series
2. I/O Terminal Block
The I/O terminal block, located on the rear panel of the camera, can be used to develop application
for alarm input and output.
1 2 3 4
Pin Assignment
No. Function
No. Function
1
Alarm COM
3
Alarm Input
2
Alarm Output
4
Digital GND
3. Installation
This installation guide provides the basic instructions on installing an EAN Plus box IP camera. For
details, please refer to the User’s Manual in the software CD.
3.1 Lens Installation and Adjustment
You can install either a CS-mount or a C-mount lens into the camera. It is recommended to use a
lens with aperture ratio of F/1.4 or smaller. Please refer to the following reference steps.
Focus Screw
Zoom Screw
C-Mount Lens Adapter
DC Auto Iris Lens Connector
CS-Mount Lens:
1.
Remove the cover cap from the camera body.
2.
Install the lens into the camera body.
3.
Adjust the lens using the Focus / Zoom crews.
3
EAN Plus Series
If you are using a DC Auto Iris lens:
1.
Remove the cover cap from the camera body.
2.
Install the lens into the camera body.
3.
Connect the DC cable to the DC Auto Iris Lens Connector.
4.
When making final focus adjustment, place the ND filter (not supplied in the package) in
front of the lens to force the lens iris to open, and then adjust the lens using the Focus /
Zoom Screws.
5.
Lock the Focus Screw and then remove the ND filter.
C-Mount Lens:
1.
Remove the cover cap from the camera body.
2.
Install the lens into the camera body using the supplied C-mount lens adapter.
3.
Adjust the lens using the Focus / Zoom Screws.
Note: Installing a C-mount lens without the C-mount lens adapter may damage the camera
sensor.
3.2 Top / Bottom-Mount
You can use the supplied mounting bracket and screw it on the top of the camera body to
suspend the camera, or on the bottom of the camera body to support the camera.
Top Mount
Bottom Mount
4
EAN Plus Series
4. Basic Connection
3
Audio
1
Ethernet
(PoE)
Power DC 12V
Micro SD
3
Out
Video Out
4
GND
Reset
COM
Out
In
2
In
Alarm
5
1.
Use a standard network cable to connect the camera to the network.
2.
Connect the camera to power using one of the following methods:
•
Plugging the supplied power pigtail cable to the DC 12V port.
•
Using the PoE function and the power will be provided over the network cable.
3.
Optionally connect the camera to a speaker and microphone. Note that microphones with
external power supplies are required.
4.
Optionally connect the camera to a monitor using a BNC cable.
5.
Optionally connect the camera to the input / output devices.
After powering the camera, the power LED will be lit in red and you can access the live view and
adjust the image clarity.
5
EAN Plus Series
5. Accessing the Camera
You have to assign an IP address for your camera to be accessible. To assign an IP address to the
camera, use the IP Utility (IPU) software included in the software CD. Please connect the camera in
the same LAN of your computer.
1. Install and then start the IPU program
. The following dialog box appears.
2. Click Find Devices to search the cameras connected in the LAN. The default network values of
the cameras will be displayed. By default, the network protocol of the camera is DHCP.
3. To configure the network settings, select a camera and then click Login/Multi Login to log in.
4. Type the user ID and password. Click OK.
Note:
1. The default user ID is user1 and the default password is 11111111.
2. If you select more than one camera that has the same user ID / password, you will be able
to log in several cameras at once.
6
EAN Plus Series
5. To change the IP address, double-click the IP Address of the camera. Type a new IP address and
then click Set IP Address to save the settings.
You can also change the other settings by double-clicking the values. After configuring the
values, click Save Configuration.
Note: Most networks uses DHCP to assign IP address, if you are unsure of your network
settings, please consult your network administrators for configuration details.
6. To access the camera, highlight the camera and click Connect to Selected IP. The Internet
Explorer window pops up.
7. Type the user ID and password to log in. The Live View window of the camera appears.
Note:
1. You might be required to download ActiveX for viewing the camera feed. If asked, click Yes.
2. To enable Remove Live View, Firmware Upgrade and ActiveX Prompt on Internet Explorer,
some settings have to be complete. Please refer to 5.2 Settings for Microsoft Internet
Explorer in the User’s Manual.
7
EAN Plus Series
6. Network Connections
You can use one of the methods below to connect the camera to the network.
Router or LAN Connection
This is the most common connection in which the IP camera is connected to a router and allows
multiple users on and off site to see the IP camera on a LAN/WAN (Internet). The camera must be
assigned an IP address that is compatible with its LAN. By setting up port forwarding on the router,
you can remotely access the cameras from outside of the LAN via the Internet. To remotely access
the Web interface of the IP camera, please refer to 7.3.2 DDNS in the User’s Manual. To set up port
forwarding, please consult the manual of the router.
Straight-through LAN patch cable
Right: Pinout of a straight-through cable.
8
EAN Plus Series
Direct High-Speed Connection
In a Direct High-Speed Connection, the camera connects directly to a modem without the need for a
router. You need to set the static or dynamic WAN IP address assigned by your ISP (Internet Service
Provider) in the camera’s configuration web pages. To access the camera, just type “http://xxx”,
where xxx is the IP address given by your ISP. If you have a dynamic IP address, this connection may
require that you use DDNS for a reliable connection. Please refer to 7.3.2 DDNS in the User’s
Manual.
One-to-One Connection (Directly from PC to IP Camera)
You can connect directly without using a switch, router or modem. However, only the PC connected
to the camera will be able to view the IP camera. You will also have to manually assign a compatible
IP address to both the computer and the IP camera. Unless the PC has another network connection,
the IP camera will be the only network device visible to the PC. See the diagram below:
Pinout of straight patch cable
Assign IP Address
Right: Pinout of a crossed-over cable.
9
EAN Plus Series
7. Upgrading Firmware
You can upgrade camera’s firmware using the IP Utility software included in the software CD.
1. Follow Step 1 to Step 4 in 5. Accessing the Camera to log in the camera.
2. Highlight the camera and then click Upgrade Firmware. A browsing window appears.
3. Select the firmware file (.evb) and then click Open. The IP Utility will automatically upgrade the
firmware.
The camera will reboot once the update is complete. Click Find Devices, the new firmware version
should be displayed in the last part of the Machine Name.
10
EverFocus Electronics Corp.
EverFocus Taiwan:
EverFocus Europe - Germany:
12F, No.79, Sec. 1, Shin-Tai Wu Road,
Hsi-Chih, Taipei, Taiwan
TEL: +886 2 2698 2334
FAX: +886 2 2698 2380
www.everfocus.com.tw
marketing@everfocus.com.tw
Albert-Einstein-Strasse 1, D-46446
Emmerich, Germany
TEL: +49 2822 93940
FAX: +49 2822 939495
www.everfocus.de
info@everfocus.de
EverFocus China - Beijing:
EverFocus China - Shenzhen:
Room 609, Technology Trade Building,
Shangdi Information Industry Base,
Haidian District, Beijing 100085, China
TEL: +86 10 6297 3336~39
FAX: +86 10 6297 1423
www.everfocus.com.cn
marketing@everfocus.com.cn
4F, No. 2, D4 Building, Wan Yelong
Industrial Park, Tangtou Road, Shiyan,
Baoan, Shenzhen, Guangdong 518101, China
TEL: +86 755 2765 1313
FAX: +86 755 2765 0337
www.everfocus.com.cn
marketing@everfocus.com.cn
EverFocus USA - California:
EverFocus USA - New York:
1801 Highland Avenue, Unit A, Duarte, CA 91010, USA
TEL: +1 626 844 8888
FAX: +1 626 844 8838
www.everfocus.com
sales@everfocus.com
415 Oser Avenue, Unit S, Hauppauge, NY 11788, USA
TEL: +1 631 436 5070
FAX: +1 631 436 5027
www.everfocus.com
sales@everfocus.com
EverFocus Japan:
EverFocus Europe - UK:
5F, Kinshicho City Building, 2-13-4
Koto-Bashi,Sumida-Ku, Tokyo, 130-0022, Japan
TEL: +81 3 5625 8188
FAX: +81 3 5625 8189
www.everfocus.co.jp
info@everfocus.co.jp
Unit 12, Spitfire Business Park,
Hawker Road, Croydon Surrey, CR0 4WD, UK
TEL: +44 20 8649 9757 / +44 845 430 9999
FAX: +44 20 8649 9907
www.everfocusuk.co.uk
salesuk@everfocus.com
EverFocus India:
Suite 803, Housefin Bhavan, C-21,
Bandra Kurla Complex, Bandra (East),
Mumbai 400051, India
TEL: +91 22 6128 8700
FAX: +91 22 6128 8705
www.everfocus.in
sales@everfocus.in
Your EverFocus product is designed
and manufactured with high quality
materials and components which can
be recycled and reused.
This symbol means that electrical and
electronic equipment, at their
end-of-life, should be disposed of
separately from your household waste.
Please, dispose of this equipment at
your local community waste
collection/recycling centre.
In the European Union there are
separate collection systems for used
electrical and electronic product.
Please, help us to conserve the
environment we live in!
Ihr EverFocus Produkt wurde entwickelt
und hergestellt mit qualitativ
hochwertigen Materialien und
Komponenten, die recycelt und wieder
verwendet werden können.
Dieses Symbol bedeutet, dass
elektrische und elektronische Geräte am
Ende ihrer Nutzungsdauer vom
Hausmüll getrennt entsorgt werden
sollen.
Bitte entsorgen Sie dieses Gerät bei
Ihrer örtlichen kommunalen
Sammelstelle oder im Recycling Centre.
Helfen Sie uns bitte, die Umwelt zu
erhalten, in der wir leben!
P/N: 4605PQ3300B010A-Ver.C
Download PDF