Canon | C50 | Canon Multipass C50

REVISION 0
MultiPASS C50
MultiPASS C50
MultiPASS C50
MultiPASS C50
MultiPASS C50
MultiPASS C50
HANDSET APPARATUS
FEB. 1998
COPYRIGHT  1998 CANON INC.
H12-1033
H12-1034
H12-1035
H12-1037
H12-1038
H12-1039
230V
230V
230V
230V
230V
230V
EC
UK
GER
FRN
AUS
AE
HY8-30AE-000
CANON MultiPASS C50 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Application
This manual has been issued by Canon Inc. for qualified person to learn technical theory, installation, maintenance, and repair of products. This manual covers all localities where the products
are sold. For this reason, there may be information in this manual that does not apply to your locality.
Corrections
This manual could include technical inaccuracies or typographical errors due to improvements or changes in the products. When changes occur in applicable products or in the content of this
manual, Canon will release technical information as the need arises. In the event of major changes in the contents of this manual over a long or short period. Canon will issue a new editions of
this manual.
The following paragraph does not apply to any countries where such provisions are inconsistent with local low.
Trademarks
The product names and company names described in this manual are the registered trademarks of the individual companies.
Copyright
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be copied, reproduced or translated into another language, in whole or in part, without the
written consent of Canon Inc.
Copyright  1998 by Canon Inc.
Office Imaging Products Technical Support Dept. 2
CANON INC.
5-1 Hakusan 7-Chome, Toride-city, Ibaraki 302-0023, Japan
DTP Systems
This manual was produced on Apple Macintosh personal computer and Canon SUPER LASER SHOT B406 PS laser beam printer.
Parts layout illustrations were created using Macromedia FreeHand 5.5J.
Documents and page layouts were created using Adobe PageMaker 6.0J.
Parts lists were created using  ACI 4th Dimension and converted to PICT format by Solutions, Inc. Super GLUE II.
I. CONTENTS
1. ILLUSTRATION INDEX
2. PARTS LAYOUT & PARTS LIST
3. TOOL
4. LUBRICATIONS
5. GUIDE TO REPLACEMENT
6. NUMERICAL INDEX
I
II
II. ABOUT THIS MANUAL
1. ILLUSTRATION INDEX
For illustration index, the parts layout illustrations in this parts catalog are listed in
abbreviated form in order of illustration number to identify the pages they appear on. To find
an illustration of a part, see the ILLUSTRATION INDEX.
2. PARTS LAYOUT & PARTS LIST
Parts layout illustration
a) Parts search
c) RANK
The service parts with N in the RANK column are order parts.
d) QTY
The QTY column gives the number of parts in the corresponding components layout
illustration.
e) DESCRIPTION
The DESCRIPTION column gives the part names in English.
To order a part, indicate the part name, too.
Find a part from the parts layout illustration and find its key number from the parts list to
identify the part number and name.
Further, screws, nuts, washers, grip rings, pins and spacers are mentioned in the parts list.
Note: If parts have the same or similar shape but different specifications, their key
number is assigned to several part numbers and names in the parts list.
3. TOOL
b) Parts replacement procedure
4. LUBRICATIONS
The parts layout illustrations are arranged according to the disassembly procedure of the product.
When a unit in the illustration can be disassemble further, a reference illustration page of the
disassembly will be included.
Parts where grease is to be applied are displayed as “Lubrication”. When replacing parts, or if
grease has accidentally been wiped off, refer to “4”. (Lubrications), and reapply the grease.
The parts require carefully work are marked “See page 5-x”. So refer to the corresponded page
“5”. (GUIDE TO REPLACEMENT).
The letters ( A , B etc.) in the illustration indicate the connection locations of cables and
screws.
Parts list
a) FIGURE & KEY No.
The FIGURE & KEY No. column corresponds to the key numbers assigned to the parts in the
parts layout illustration.
It also corresponds to the part locations printed on the PC board.
b) PART NUMBER
The PART NUMBER column gives the part numbers corresponding to the key numbers. To
order a part, indicate the part number clearly.Note:
Parts
This is a list of tools used for servicing products.
Where grease is to be applied in order to allow moving parts to work smoothly, and to
increase conductivity, the type and amount of grease to be used will be mentioned.
5. GUIDE TO REPLACEMENT
Explains the special cares and cautions for the parts replacement.
6. NUMERICAL INDEX
All the parts listed in this parts catalog are arranged in order of part number. You can
identify part locations and names from the NUMERICAL INDEX.
III. REVISION HISTORY
REVISON
0
CONTENT
Original
III
1. ILLUSTRATION INDEX
See Page
2-1
FIGURE 1 PACKAGE CONTENTS
See Page
2-2
FIGURE 2 UPPER COVER
& PRINTER COVER
See Page
2-3
FIGURE 3 SCANNER
& OPERATION PAN£EL
See Page
2-4
FIGURE 4 SCNT BOARD
& NCU BOARD
14
15
5
4
1
3
16
1
6
1
12 11
See page 5-2
(FIGURE 3-e)
2
13
10
3
1
10
8
See page 5-1
(FIGURE 3-a)
2
8
3
7
4
4
2
3
5
Lubrications
6
See page 5-1
(FIGURE 3-b)
See page 5-1
(FIGURE 3-d)
8
See page 5-2
(FIGURE 3-f)
D
See page 5-1
(FIGURE 3-c)
A
See page 5-1
(FIGURE 2-a)
C
D
5
2
3
4
See page 5-1
(FIGURE 2-b, 2-d)
4
1
9
7
See page 5-1
(FIGURE 2-c)
C
9
2
B
2
2
6
7
A
6
14
B
7
13
FIGURE 5 PRINTER
& POWER SUPPLY
See Page
2-5
5
8
Note:Software other than MultiPASS Desktop Manager which has been included in this package
will not be assigned as service parts, and are not mentioned here.
Please refers to the User's Guide for details concerning these items.
See Page
2-6
FIGURE 6 MAIN FRAME ASS’Y
See Page
2-7
FIGURE 7 OPERATION PANEL
& ADF, UPPER
See page 2-24
for the disassembly
See Page
2-8
FIGURE 8 ADF, UPPER
See page 5-3
(FIGURE 8-b)
25
24
3
4
3
1
1 See page 2-11
1
for the disassembly
diagram of this unit.
See page 5-2
(FIGURE 5-a)
Se
(F
9 11
4
1
7
7
2
2
2
11
3
2
12
5
13
See page 5-2
(FIGURE 8-a)
4
6
3
9
8
See page 2-23
for the disassembly
diagram of this unit.
17
10
4
See page 5-2
(FIGURE 7-a)
6
5
7
4
16
18
7
See page 5-2
(FIGURE 7-c)
3
14
19
15
5
3
See page 5-2
(FIGURE 7-b)
22
21
20
23
6
1-1
1-2
See Page
2-9
FIGURE 9 SEPARATION GUIDE
ASS’Y
See Page
2-10
FIGURE 10 ADF, LOWER (1)
See Page
2-11
FIGURE 11 ADF, LOWER (2)
1
1
See page 2-13
for the disassembly
diagram of this unit.
See page 5-3
(FIGURE 10-a)
3
2
4
3
2
8
5
4
1
3
5
6
7
1
& PCNT BOARD ASS’Y
Tape
2
2
See Page
2-12
FIGURE 12 AUTO SHEET FEEDER
7
15
See page 2-24
for the disassembly
diagram of this unit.
See page 2-20
for the disassembly
diagram of this unit.
See page 5-3
(FIGURE 12-a, 12-b)
6
10
5
4
4
5
6
11
3
7
8
9
6
Lubrication
10
12
16
11
9
14
13
See page 5-3
(FIGURE 10-b)
1
12
17
13
13
14
Lubrication
11
FIGURE 13 CARRIAGE SECTION (1)
1 Lubrication
2
3
See Page
2-13
FIGURE 14 CARRIAGE SECTION (2)
See Page
2-14
See Page
2-15
FIGURE 15 MOTORS
PAPER FEED SECTION (1)
See Page
2-16
See page 5-4
(FIGURE 16-a)
Break this part to
remove,and replace it
with a new one.
1
2
6
FIGURE 16
3
1
2
4
5
7
4
6
4 Lubrication
3
1
8
See page 2-14
for the disassembly
diagram of this unit.
See page 5-3
(FIGURE 13-b)
9
2
10
3
See page 2-19
for the disassembly
diagram of this unit.
4
9
8
Break this part to
remove,and replace
it with a new one.
12
7
9
See page 5-3
(FIGURE 13-a)
15
5
10
11
8
13
15
12
5 6
13
Lubrication
10Lubrication
2
11
14
See page 5-3
(FIGURE 14-a)
16
See page 5-4
(FIGURE 14-b)
Use new one, if this
part is removed.
7
Lubrication
11
14
16
12
FIGURE 17
PAPER FEED SECTION (2)
& PURGE UNIT
See Page
2-17
See Page
2-18
FIGURE 18 PRINTER FRAME
See Page
2-19
FIGURE 19 SPURS
FIGURE 20
See Page
2-20
AUTO SHEET FEEDER (1)
2
2
Lubrication
1
See page 5-4
(FIGURE 17-a)
4
See page 5-4
(FIGURE 18-a)
1
5
See page 5-4
(FIGURE 17-b)
3
1
6
4
5
8
9
3
6
6
10
2
3
5
3
2
7
Lubrication
4
3
7
7
8
1
11
8
See page 5-4
(FIGURE 17-c)
FIGURE 21
AUTO SHEET FEEDER (2)
See Page
2-21
FIGURE 22
AUTO SHEET FEEDER (3)
See Page
2-22
FIGURE 23 FUSE, POWER SUPPLY
See Page
2-23
FIGURE 24 SCNT BOARD ASS’Y &
PCNT BOARD ASS’Y
1
See Page
2-24
2
3
1
See page 5-5
(FIGURE 24-a)
3
7 Lubrication
See page 5-4
9 (FIGURE 21-a)
Lubrication
5
5
4
8
4
6
2
4
10
2
3
1
1
See page 5-4
(FIGURE 22-a)
2
1-3
1-4
FIGURE 25
TELEPHONE 3 HANDSET
See Page
2-25
FIGURE 26
TELEPHONE 4 HANDSET
See Page
2-26
FIGURE 27
ADJUNCTS OF HANDSET
See Page
2-27
See Page
3-1
FIGURE 28 TOOLS
1
m
1
0m
FL
OIL G311S
1.2
1
T1
T2
T3
See page 5-1
(FIGURE 2-b)
T5
2
T4
T6
2. PARTS LAYOUT & PARTS LIST
FIGURE 1 PACKAGE CONTENTS
14
15
5
1
3
4
16
FIGURE
&
KEY No.
12 11
1- 1
13
10
2
8
9
PART No.
R
A
N
K
Q
T
Y
DESCRIPTION
REMARKS
WT3-5014-000
1 POWER SUPPLY CORD, 230V
UK
WT3-5015-000
1 POWER SUPPLY CORD, 230V
AUS
WT3-5020-000
1 POWER SUPPLY CORD, 230V
GER
FRN
AE
AE
FRN
GER
2
HB1-2724-000
1 TRAY, SUPPORT DOCUMENT
AE AUS FRN GER UK EC
3
HB1-2723-000
1 TRAY, EXIT DOCUMENT
AE AUS FRN GER UK EC
4
HH2-1914-000
1 MODULAR CORD, 6P
UK
HH2-2074-000
1 MODULAR CORD (GERM)
GER
HH2-2219-000
1 MODULAR CORD
FRN
HH2-2478-000
1 MODULAR CORD
AUS
HH2-2824-000
1 MODULAR CORD, 2P
AE
5
HB1-2717-000
1 TRAY, PAPER EXTENTION
AE AUS FRN GER UK EC
6
NPN
1 BJ CARTRIDGE CONTAINER
AE AUS FRN GER UK EC
7
QB1-2213-000
1 LID, CONTAINER
AE AUS FRN GER UK EC
8
NPN
1 BC-20 BLACK BJ CARTRIDGE
AE AUS FRN GER UK EC
9
NPN
1 BC-21e COLOR BJ CARTRIDGE
AE FRN AUS EC UK GER
10
HH2-2756-020
1 BT-FCC ADAPTER
UK
11
HT1-2107-000
N
1 USER'S GUIDE, MULTIPASS C50
AE
UK
UK AUS AE
HT1-3059-000
N
1 USER'S GUIDE, MULTIPASS C50
FRN
HT1-5037-000
N
1 USER'S GUIDE, MULTIPASS C50
GER
HT1-2108-000
N
1 USER'S GUIDE, DESKTOP MANAGER
AE
UK
UK AUS AE
HT1-3060-000
N
1 USER'S GUIDE, DESKTOP MANAGER
FRN
HT1-5038-000
N
1 USER'S GUIDE, DESKTOP MANAGER
GER
12
6
7
N
13
HA2-0868-000
1 LABEL, MERCURY
UK
14
HH2-2654-000
1 CABLE UNIT
AE AUS FRN GER UK EC
15
WE8-5147-000
1 BEAD, CRT CABLE
AE AUS FRN GER UK EC
16
HG5-1334-000
N
1 CD-ROM, DRIVER SOFTWARE
EC UK AUS AE
HG5-1335-000
N
1 CD-ROM, DRIVER SOFTWARE
GER
HG5-1336-000
N
1 CD-ROM, DRIVER SOFTWARE
FRN
Note:Software other than MultiPASS Desktop Manager which has been included in this package
will not be assigned as service parts, and are not mentioned here.
Please refers to the User's Guide for details concerning these items.
2-1
2-2
FIGURE 2 UPPER COVER & PRINTER COVER
FIGURE
&
KEY No.
1
2
3
4
See page 5-1
(FIGURE 2-a)
5
Lubrications
See page 5-1
(FIGURE 2-b, 2-d)
9
6
8
4
7
See page 5-1
(FIGURE 2-c)
PART No.
R
A
N
K
Q
T
Y
DESCRIPTION
REMARKS
2- 1
HB1-2886-000
1 GUIDE, DOCUMENT,LEFT
AE AUS FRN GER UK EC
2
HB1-2885-000
1 GUIDE, DOCUMENT, RIGHT
AE AUS FRN GER UK EC
3
HB1-2884-000
1 COVER, PRINTER
AE AUS FRN GER UK EC
4
HB1-2883-000
2 SLIDER, RACK
AE AUS FRN GER UK EC
5
HS5-2130-000
1 SPRING, SLIDER
AE AUS FRN GER UK EC
6
HS5-0238-000
1 GEAR, Z16
AE AUS FRN GER UK EC
7
HB1-2913-000
1 SHEET, CARTRIDGE
AE AUS FRN GER UK EC
8
XA9-0476-000
1 SCREW, TP M3X8
AE AUS FRN GER UK EC
9
HB1-2701-080
1 COVER, UPPER
AE AUS FRN GER UK EC
FIGURE 3 SCANNER & OPERATION PANEL
FIGURE
&
KEY No.
6
See page 5-2
(FIGURE 3-e)
1
See page 5-1
(FIGURE 3-a)
7
3
2
See page 5-1
(FIGURE 3-b)
Q
T
Y
DESCRIPTION
REMARKS
3- 1
NPN
1 OPERATION PANEL & ADF UPPER
AE AUS FRN GER UK EC
2
NPN
1 ADF LOWER ASS'Y
AE AUS FRN GER UK EC
3
XB2-7300-607
2 SCREW, M3X6
AE AUS FRN GER UK EC
8
4
HB1-2888-000
1 GUIDE, CABLE
AE AUS FRN GER UK EC
See page 5-2
(FIGURE 3-f)
5
HH7-2172-000
1 SPEAKER
AE AUS FRN GER UK EC
6
WE8-5560-000
1 FERRITE CORE, FSOC170RT07
AE AUS FRN GER UK EC
7
HB1-2867-000
1 STOPPER, OPERATION PANEL
AE AUS FRN GER UK EC
8
WE8-5577-000
1 FERRITE CORE
AUS GER AE FRN EC UK
4
A
See page 5-1
(FIGURE 3-d)
3
PART No.
R
A
N
K
See page 5-1
(FIGURE 3-c)
5
A
2-3
2-4
FIGURE 4 SCNT BOARD & NCU BOARD
FIGURE
&
KEY No.
1
10
C
4
1
C
2
B
2
2
6
14
B
7
13
8
5
9 11
See page 2-24
for the disassembly
Se
(F
T
Y
DESCRIPTION
REMARKS
HB1-2781-000
1 COVER, NCU
AE AUS FRN GER UK EC
2
XB1-2300-607
5 SCREW, BH3X6(S)
AE AUS FRN GER UK EC
3
HH2-2522-000
1 WIRE, GROUNDING
AE AUS FRN GER UK EC
4
HG5-0616-090
1 NCU BOARD ASS'Y
GERUK
UKGER
EC
EC
HG5-0886-000
1 NCU BOARD ASS'Y
FRN
HG5-1207-000
1 NCU BOARD ASS'Y
AE
HG5-1224-020
1 NCU BOARD PCB ASSEMBLY
AUS
5
HG5-1246-000
1 SCNT BOARD ASS'Y
AE AUS FRN GER UK EC
6
HB1-2721-000
1 PLATE, CIRCUIT BOARD BASE
AE AUS FRN GER UK EC
7
HH2-2726-000
1 FLAT CABLE (SCNT-PCNT), 23P
AE AUS FRN GER UK EC
8
HH2-2727-000
1 FLAT CABLE (SCNT-PCNT), 19P
AE AUS FRN GER UK EC
9
XB6-7300-607
2 SCREW, TP, M3x6
AE AUS FRN GER UK EC
10
HH2-2753-000
1 CABLE WITH CONNECTOR, 2P
AE AUS FRN GER UK EC
11
WE8-5407-000
1 FERRITE CORE, FSOC410RN
AE AUS FRN GER UK EC
12
HH2-2817-000
1 CABLE WITH CONNECTER, 11P
AE AUS FRN GER UK EC
13
HH2-2728-020
1 FLAT CABLE (SCNT-NCU)
AE AUS FRN GER UK EC
14
WS9-5038-000
1 SPACER, MODULAR
GER
D
3
Q
4- 1
D
2
PART No.
R
A
N
K
FIGURE 5 PRINTER & POWER SUPPLY
FIGURE
&
KEY No.
5- 1
1 See page 2-11
for the disassembly
diagram of this unit.
See page 5-2
(FIGURE 5-a)
PART No.
NPN
R
A
N
K
Q
T
Y
DESCRIPTION
REMARKS
1 PRINT & ASF ASS'Y
AE AUS FRN GER UK EC
2
XB4-7300-807
2 SCREW, TAP TIGHT, BINDING HEAD
AE AUS FRN GER UK EC
3
HH3-5312-020
1 POWER SUPPLY UNIT
AE AUS FRN GER UK EC
4
HB1-2722-000
1 GUIDE, PAPER, MANUAL FEED
AE AUS FRN GER UK EC
2
3
See page 2-23
for the disassembly
diagram of this unit.
4
2-5
2-6
FIGURE 6 MAIN FRAME ASS’Y
FIGURE
&
KEY No.
1
2
4
6
5
7
3
PART No.
R
A
N
K
Q
T
Y
DESCRIPTION
REMARKS
6- 1
HB1-2713-000
1 ABSORBER, WASTE INK B
AE AUS FRN GER UK EC
2
HB1-2712-000
1 ABSORBER, WASTE INK A
AE AUS FRN GER UK EC
3
HB1-2714-000
1 TRAY, RECORDING PAPER
AE AUS FRN GER UK EC
4
HF5-0279-020
1 MAIN FRAME ASS'Y
AE AUS FRN GER UK EC
5
QB1-0507-000
1 FOOT, PRINTER
AE AUS FRN GER UK EC
6
HB1-2715-000
1 PLATE, PAPER SUPPORT (LEFT)
AE AUS FRN GER UK EC
7
HB1-2716-000
1 PLATE, PAPER SUPPORT (RIGHT)
AE AUS FRN GER UK EC
N
FIGURE 7 OPERATION PANEL & ADF, UPPER
FIGURE
&
KEY No.
7- 1
R
A
N
K
Q
T
Y
DESCRIPTION
REMARKS
HB1-2909-000
1 SHEET, OPERATION PANEL
AE AUS AE
UK
UK
HB1-2910-000
1 SHEET, OPERATION PANEL
GER
HB1-2911-000
1 SHEET, OPERATION PANEL
FRN
HG5-1261-000
1 OPERATION PANEL ASS'Y
EC
HG5-1262-000
1 OPERATION PANEL ASS'Y
UK
AE AUS AE
UK
HG5-1263-000
1 OPERATION PANEL ASS'Y
GER
HG5-1264-000
1 OPERATION PANEL ASS'Y
FRN
HB1-2733-000
1 FACE PLATE, ONE-TOUCH DIAL
UK
AE AUS AE
UK
HB1-2734-000
1 FACE PLATE, ONE-TOUCH DIAL
GER
HB1-2735-000
1 FACE PLATE, ONE-TOUCH DIAL
FRN
4
HH2-2755-000
1 FLAT CABLE (SCNT-OPCNT)
AE AUS FRN GER UK EC
5
NPN
1 DOCUMENT GUIDE UPPER
AE AUS FRN GER UK EC
6
XB4-7300-807
2 SCREW, TAP TIGHT, BINDING HEAD
AE AUS FRN GER UK EC
7
XB1-2300-607
1 SCREW, BH3X6(S)
AE AUS FRN GER UK EC
1
2
2
PART No.
3
3
4
See page 5-2
(FIGURE 7-a)
7
See page 5-2
(FIGURE 7-c)
5
See page 5-2
(FIGURE 7-b)
6
2-7
2-8
FIGURE 8 ADF, UPPER
See page 5-3
(FIGURE 8-b)
25
24
3
FIGURE
&
KEY No.
4
3
4
1
7
7
2
11
12
5
13
See page 5-2
(FIGURE 8-a)
6
9
8
17
10
16
18
3
14
19
15
22
20
23
21
PART No.
R
A
N
K
Q
T
Y
DESCRIPTION
REMARKS
8- 1
HB1-2874-000
1 LEVER, SWITCHING
AE AUS FRN GER UK EC
2
XA9-0476-000
1 SCREW, TP M3X8
AE AUS FRN GER UK EC
3
XB4-7300-807
3 SCREW, TAP TIGHT, BINDING HEAD
AE AUS FRN GER UK EC
4
HB1-2866-000
2 PLATE, PRESSURE
AE AUS FRN GER UK EC
5
HS5-6042-000
1 ROLLER, DELIVERY, 2
AE AUS FRN GER UK EC
6
HB1-2863-000
1 STOPPER, DOCUMENT
AE AUS FRN GER UK EC
7
HB1-2865-000
2 SHAFT, BACK UP ROLLER
AE AUS FRN GER UK EC
8
HS5-2131-000
1 SPRING
AE AUS FRN GER UK EC
9
HG5-1239-000
1 SEPARATION GUIDE ASS'Y
AE AUS FRN GER UK EC
10
HB1-2862-000
1 ARM, DETECTION (DS)
AE AUS FRN GER UK EC
11
HB1-2864-000
1 ROLLER, BACK UP
AE AUS FRN GER UK EC
12
HS5-6023-030
1 ROLLER, BACK UP
AE AUS FRN GER UK EC
13
HB1-2861-000
1 ARM, DETECTION (DES)
AE AUS FRN GER UK EC
14
HG5-1245-000
1 DOCUMENT EDGE SENSOR ASS'Y
AE AUS FRN GER UK EC
15
HH2-2747-000
1 CABLE WITH CONNECTOR, 3P
AE AUS FRN GER UK EC
16
HH2-2746-000
1 CABLE WITH CONNECTOR, 3P
AE AUS FRN GER UK EC
17
HG5-1244-000
1 DOCUMENT SENSOR ASS'Y
AE AUS FRN GER UK EC
18
HB1-2860-000
1 COVER, ADF, UPPER
AE AUS FRN GER UK EC
19
HB1-2875-000
1 SHEET, DOCUMENT STOP
AE AUS FRN GER UK EC
20
HB1-1784-000
1 BRUSH, STATIC DISCHARGE
AE AUS FRN GER UK EC
21
HS5-2129-000
2 SPRING, WHITE SHEET
AE AUS FRN GER UK EC
22
HF5-0303-000
1 WHITE SHEET UNIT
AE AUS FRN GER UK EC
23
HB1-2897-000
1 SHEET, LIGHT SHIELD
AE AUS FRN GER UK EC
24
HS5-2132-000
1 SPRING, WHITE SHEET
AE AUS FRN GER UK EC
25
HH2-2810-000
1 WIRE, GROUNDING
AE AUS FRN GER UK EC
FIGURE 9 SEPARATION GUIDE ASS’Y
FIGURE
&
KEY No.
PART No.
R
A
N
K
Q
T
Y
DESCRIPTION
REMARKS
9- 1
HS5-2079-000
1 SPRING, SEPARATION GUIDE
AE AUS FRN GER UK EC
2
HB1-2873-000
1 HOLDER, SEPARATION GUIDE
AE AUS FRN GER UK EC
3
HB1-2871-000
1 PLATE, PRESSURE
AE AUS FRN GER UK EC
4
HB1-2872-000
1 PAD, SEPARATION
AE AUS FRN GER UK EC
5
HB1-2898-000
1 SHEET, SEPARATION
AE AUS FRN GER UK EC
6
HB1-2895-000
1 HOLDER, SEPARATION
AE AUS FRN GER UK EC
2
4
1
5
6
3
2-9
2-10
FIGURE 10 ADF, LOWER (1)
FIGURE
&
KEY No.
2
1
See page 5-3
(FIGURE 10-a)
3
4
5
6
7
8
6
7
15
10
11
12
16
9
See page 5-3
(FIGURE 10-b)
17
13
Lubrication
14
PART No.
R
A
N
K
Q
T
Y
DESCRIPTION
REMARKS
10 - 1
HB1-2891-020
1 COVER, ADF LOWER
AE AUS FRN GER UK EC
2
HB1-2881-000
1 SHAFT, SEPARATION ROLLER
AE AUS FRN GER UK EC
3
HS5-0237-000
1 GEAR, 32T
AE AUS FRN GER UK EC
4
HS5-2027-000
1 SPRING, CLUCH
AE AUS FRN GER UK EC
5
HB1-1779-000
1 SPACER
AE AUS FRN GER UK EC
6
XB4-7300-807
2 SCREW, TAP TIGHT, BINDING HEAD
AE AUS FRN GER UK EC
7
HF5-0305-000
2 PANEL HOLDER UNIT
AE AUS FRN GER UK EC
8
HB1-3034-000
1 ROLLER, SEPARATION
AE AUS FRN GER UK EC
9
HS1-1063-000
1 BUSHING
AE AUS FRN GER UK EC
10
HS5-0231-000
1 GEAR, 55T/19T
AE AUS FRN GER UK EC
11
HS5-0230-000
1 GEAR, 44T/57T
AE AUS FRN GER UK EC
12
HS5-0232-000
1 GEAR, 56T
AE AUS FRN GER UK EC
13
HB1-2882-000
1 PLATE, GROUNDING
AE AUS FRN GER UK EC
14
XB1-2300-407
1 SCREW, BH3X4 (S)
AE AUS FRN GER UK EC
15
HS5-0236-000
1 GEAR, 36T/24T
AE AUS FRN GER UK EC
16
HS5-0233-000
1 GEAR, 34T
AE AUS FRN GER UK EC
17
HS5-0234-000
1 GEAR, 42T
AE AUS FRN GER UK EC
FIGURE 11 ADF, LOWER (2)
2
FIGURE
&
KEY No.
1
3
5
4
PART No.
R
A
N
K
Q
DESCRIPTION
T
Y
REMARKS
11 - 1
WE8-5556-000
1 FERRITE CORE
AE AUS FRN GER UK EC
2
HH2-2745-000
1 FLAT CABLE (CS-SCNT)
AE AUS FRN GER UK EC
3
HG5-1235-000
1 CONTACT SENSOR UNIT
AE AUS FRN GER UK EC
4
HB1-2890-000
1 FRAME, ADF, LOWER
AE AUS FRN GER UK EC
5
HS5-0235-000
1 GEAR, 19T
AE AUS FRN GER UK EC
6
HB1-2878-000
1 ROLLER, DOCUMENT FEED
AE AUS FRN GER UK EC
7
XD2-1100-402
1 RETAINING RING (E-TYPE)
AE AUS FRN GER UK EC
8
HS1-1063-000
1 BUSHING
AE AUS FRN GER UK EC
9
HB1-2879-000
1 ROLLER, DOCUMENT EJECT
AE AUS FRN GER UK EC
10
HH7-2279-000
1 MOTOR, DOCUMENT FEED
AE AUS FRN GER UK EC
11
XB4-7300-807
2 SCREW, TAP TIGHT, BINDING HEAD
AE AUS FRN GER UK EC
12
HF5-0304-000
1 PLATE, SCANNER DRIVE
AE AUS FRN GER UK EC
13
XB1-2300-407
3 SCREW, BH3X4 (S)
AE AUS FRN GER UK EC
14
HH2-2748-000
1 WIRE, GROUNDING
AE AUS FRN GER UK EC
N
7
8
9
6
Lubrication
10
11
14
13
12
13
11
2-11
2-12
FIGURE 12 AUTO SHEET FEEDER & PCNT BOARD ASS’Y
FIGURE
&
KEY No.
See page 2-13
for the disassembly
diagram of this unit.
1
3
2
See page 2-24
for the disassembly
diagram of this unit.
See page 2-20
for the disassembly
diagram of this unit.
See page 5-3
(FIGURE 12-a, 12-b)
4
5
1
PART No.
R
A
N
K
Q
T
Y
DESCRIPTION
REMARKS
12 - 1
XB6-7300-607
4 SCREW, TP, M3x6
AE AUS FRN GER UK EC
2
HG5-1338-000
1 PCNT BOARD ASS'Y
AE AUS FRN GER UK EC
3
HG5-1125-120
1 PRINT ASS'Y
AE AUS FRN GER UK EC
4
HG5-1248-000
1 AUTO SHEET FEEDER ASS'Y
AE AUS FRN GER UK EC
5
WT2-0317-000
1 CLIP, CABLE
AE AUS FRN GER UK EC
FIGURE 13 CARRIAGE SECTION (1)
FIGURE
&
KEY No.
1 Lubrication
2
3
6
5
4
See page 2-14
for the disassembly
diagram of this unit.
See page 5-3
(FIGURE 13-b)
PART No.
R
A
N
K
Q
T
Y
DESCRIPTION
REMARKS
13 - 1
QB1-0501-020
1 ROLLER, IDLER
AE AUS FRN GER UK EC
2
QB1-0502-000
1 BRACKET, IDLER
AE AUS FRN GER UK EC
3
QB1-0503-000
1 SPRING, COIL
AE AUS FRN GER UK EC
4
QB1-1229-000
1 CLIP, SHAFT
AE AUS FRN GER UK EC
5
QB1-0972-000
1 GUIDE, CORNER
AE AUS FRN GER UK EC
6
QB1-1045-000
1 PLATE, PAPER GUIDE
AE AUS FRN GER UK EC
7
QB1-0497-020
1 HOLDER, CARRIAGE RIBBON CABLE
AE AUS FRN GER UK EC
8
HG5-1129-050
1 CARRIAGE ASS'Y
AE AUS FRN GER UK EC
9
XB5-6300-605
1 SCREW, TP, PH3X6
AE AUS FRN GER UK EC
10
QB1-1995-000
1 SHAFT, CARRIAGE
AE AUS FRN GER UK EC
11
QB1-0991-000
1 BELT, CARRIAGE
AE AUS FRN GER UK EC
12
QB1-2250-020
1 HOLDER, BELT
AE AUS FRN GER UK EC
N
9
8
7
See page 5-3
(FIGURE 13-a)
11
12
Lubrication
10Lubrication
2-13
2-14
FIGURE 14 CARRIAGE SECTION (2)
FIGURE
&
KEY No.
1
2
3
4
7
6
8
9
12
5
10
11
15
13
14
See page 5-3
(FIGURE 14-a)
16
See page 5-4
(FIGURE 14-b)
Use new one, if this
part is removed.
PART No.
R
A
N
K
Q
DESCRIPTION
T
Y
REMARKS
14 - 1
XA9-0613-000
1 NUT, SUS
AE AUS FRN GER UK EC
2
HS5-2070-020
1 SPRING, HOOK END COIL
AE AUS FRN GER UK EC
3
HB1-1704-070
1 ARM, CARRIAGE
AE AUS FRN GER UK EC
4
HB1-2778-000
1 LEVER, FORMS THICKNESS
AE AUS FRN GER UK EC
5
HB1-1702-040
1 GUIDE, INK CARTRIDGE
AE AUS FRN GER UK EC
6
HG5-1138-000
1 CARRIAGE RIBBON CABLE UNIT
AE AUS FRN GER UK EC
7
QB1-0984-000
1 GUIDE, RIBBON CABLE
AE AUS FRN GER UK EC
8
HB1-2776-000
1 BASE, CARRIAGE
AE AUS FRN GER UK EC
9
QB1-0985-000
1 PAD, CONTACT
AE AUS FRN GER UK EC
10
QB1-0987-020
1 SPRING, COIL
AE AUS FRN GER UK EC
11
QB1-1283-000
1 STOPPER
AE AUS FRN GER UK EC
12
QB1-0986-040
1 LEVER, LOCKING
AE AUS FRN GER UK EC
13
QB1-0993-020
1 COVER, LEVER
AE AUS FRN GER UK EC
14
HB1-2777-050
1 HOLDER, BJ CARTRIDGE
AE AUS FRN GER UK EC
15
QB1-1282-000
1 SPRING, COIL
AE AUS FRN GER UK EC
16
QB1-1277-000
1 TAPE, CARTRIDGE INSIDE
AE AUS FRN GER UK EC
FIGURE 15 MOTORS
FIGURE
&
KEY No.
PART No.
R
A
N
K
Q
T
Y
DESCRIPTION
REMARKS
15 - 1
HH7-2277-000
1 PULSE MOTOR, CARRIAGE
AE AUS FRN GER UK EC
2
XB1-2300-407
4 SCREW, BH3X4 (S)
AE AUS FRN GER UK EC
3
QH4-4108-000
1 MOTOR, PAPER FEED
AE AUS FRN GER UK EC
4
QB1-0500-000
1 GEAR, SLOW DOWN
AE AUS FRN GER UK EC
1
2
3
4
2
2-15
2-16
FIGURE 16 PAPER FEED SECTION (1)
FIGURE
&
KEY No.
See page 5-4
(FIGURE 16-a)
Break this part to
remove,and replace it
with a new one.
1
2
4 Lubrication
3
10
See page 2-19
for the disassembly
diagram of this unit.
Break this part to
remove,and replace
it with a new one.
9
15
8
13
5 6
7
Lubrication
11
14
16
12
PART No.
R
A
N
K
Q
DESCRIPTION
T
Y
REMARKS
16 - 1
QB1-0417-000
1 BUSHING
AE AUS FRN GER UK EC
2
QB1-0423-000
1 SPRING, COIL
AE AUS FRN GER UK EC
3
QB1-0622-000
1 WASHER, PLAIN
AE AUS FRN GER UK EC
4
HG5-1130-000
1 PAPER FEED ROLLER ASS'Y
AE AUS FRN GER UK EC
5
XA9-0613-000
1 NUT, SUS
AE AUS FRN GER UK EC
6
QB1-0421-000
1 SPRING, COIL
AE AUS FRN GER UK EC
7
QB1-0425-000
1 GEAR, TRANSMISSION
AE AUS FRN GER UK EC
8
QB1-1275-000
1 ARM, TRANSMISSION
AE AUS FRN GER UK EC
9
QB1-0422-000
1 BUSHING
AE AUS FRN GER UK EC
10
HG5-1126-000
1 SPUR ASS'Y
AE AUS FRN GER UK EC
11
QB1-1965-000
2 ROLLER, TRANSMISSION
AE AUS FRN GER UK EC
12
QB1-1278-000
2 SHAFT, ROLLER
AE AUS FRN GER UK EC
13
HG5-1131-000
1 PAPER EJECT ROLLER UNIT
AE AUS FRN GER UK EC
14
HH7-2266-000
1 INK DETECTION UNIT
AE AUS FRN GER UK EC
15
HB1-2773-000
1 FRAME, PLATEN
AE AUS FRN GER UK EC
16
HH2-2729-000
1 CABLE WITH CONNECTOR, 4P
AE AUS FRN GER UK EC
N
FIGURE 17 PAPER FEED SECTION (2) & PURGE UNIT
FIGURE
&
KEY No.
2
Lubrication
1
See page 5-4
(FIGURE 17-a)
PART No.
17 - 1
XA9-0693-000
2
HB1-2896-000
3
R
A
N
K
Q
T
Y
DESCRIPTION
REMARKS
2 SCREW, BH(RED) M3X4
AE AUS FRN GER UK EC
1 FRAME, CARRIAGE GUIDE
AE AUS FRN GER UK EC
QB1-0664-000
6 SPRING, COIL
AE AUS FRN GER UK EC
4
QB1-0409-000
1 PLATE, PRESSURE
AE AUS FRN GER UK EC
5
XB4-7300-609
1 SCREW, TAP, BINDING HEAD, M3X6
AE AUS FRN GER UK EC
6
QB1-0684-000
5 ROLLER, PRESSURE
AE AUS FRN GER UK EC
7
QB1-0467-000
1 SPRING, HOOK END COIL
AE AUS FRN GER UK EC
8
QG5-0290-120
1 PURGE UNIT
AE AUS FRN GER UK EC
N
See page 5-4
(FIGURE 17-b)
3
4
5
3
6
7
8
See page 5-4
(FIGURE 17-c)
2-17
2-18
FIGURE 18 PRINTER FRAME
FIGURE
&
KEY No.
4
See page 5-4
(FIGURE 18-a)
5
6
3
2
7
Lubrication
1
PART No.
R
A
N
K
Q
T
Y
DESCRIPTION
REMARKS
18 - 1
QB1-0974-000
1 ARM, SENSOR
AE AUS FRN GER UK EC
2
QB1-0414-000
1 HOOK, CARRIAGE
AE AUS FRN GER UK EC
3
QB1-0415-000
1 SPRING, TORSION
AE AUS FRN GER UK EC
4
QB1-0412-000
1 SPRING, TORSION
AE AUS FRN GER UK EC
5
QB1-0973-000
1 ARM, PAPER SENSOR
AE AUS FRN GER UK EC
6
QB1-2240-000
1 GUIDE, PRESSURE PLATE
AE AUS FRN GER UK EC
7
HB1-2775-000
1 FRAME, PRINTER
AE AUS FRN GER UK EC
N
FIGURE 19 SPURS
FIGURE
&
KEY No.
PART No.
R
A
N
K
Q
T
Y
DESCRIPTION
REMARKS
19 - 1
QG5-0368-000
9 CLEANER ROLLER UNIT
AE AUS FRN GER UK EC
2
QB1-1952-000
9 SPUR
AE AUS FRN GER UK EC
3
QB1-1039-000
9 SPUR SHAFT
AE AUS FRN GER UK EC
1
2
3
2-19
2-20
FIGURE 20 AUTO SHEET FEEDER (1)
2
1
8
9
6
10
5
3
4
7
8
11
R
A
N
K
Q
FIGURE
&
KEY No.
PART No.
20 - 1
QB1-2217-000
1 SUPPORT, PAPER
AE AUS FRN GER UK EC
2
QB1-2921-000
1 GUIDE, PAPER
AE AUS FRN GER UK EC
3
QG5-0960-000
1 PICK-UP ROLLER UNIT
AE AUS FRN GER UK EC
4
QB1-0485-000
1 GEAR, TRANSMISSION
AE AUS FRN GER UK EC
5
QB1-0480-000
1 GEAR, TRANSMISSION
AE AUS FRN GER UK EC
6
QB1-2194-000
1 COIL SPRING HOOK END
AE AUS FRN GER UK EC
7
QB1-0433-000
1 PAPER, GUIDE
AE AUS FRN GER UK EC
8
QB1-2197-000
2 ROLLER, SLIP
AE AUS FRN GER UK EC
9
QB1-2198-000
2 RING, RUBBER, PICK-UP
AE AUS FRN GER UK EC
10
QB1-2924-000
1 RING, RUBBER
AE AUS FRN GER UK EC
11
HB1-1598-020
1 PLATE, COVER SUPPORT
AE AUS FRN GER UK EC
T
Y
DESCRIPTION
REMARKS
FIGURE 21 AUTO SHEET FEEDER (2)
FIGURE
&
KEY No.
7 Lubrication
PART No.
R
A
N
K
Q
T
Y
DESCRIPTION
REMARKS
21 - 1
QB1-2929-000
1 SEPARATER, PAPER
AE AUS FRN GER UK EC
2
QB1-2192-000
1 GEAR, CONTROL
AE AUS FRN GER UK EC
3
QB1-0479-000
1 GEAR, TRANSMISSION
AE AUS FRN GER UK EC
4
QB1-2212-000
1 GEAR, PICK-UP ROLLER
AE AUS FRN GER UK EC
5
QB1-2195-000
1 PLATE, LEVER GUIDE
AE AUS FRN GER UK EC
6
QB1-0483-000
1 GEAR, ONE WAY CLUTCH
AE AUS FRN GER UK EC
7
QB1-0482-000
1 SPRING, ONE WAY CLUTCH
AE AUS FRN GER UK EC
8
QB1-0484-000
1 GEAR, TRANSMISSION
AE AUS FRN GER UK EC
9
QB1-2193-000
1 GEAR, CAM
AE AUS FRN GER UK EC
10
XB4-7300-609
1 SCREW, TAP, BINDING HEAD, M3X6
AE AUS FRN GER UK EC
See page 5
9 (FIGURE 21
Lubrication
5
8
6
2
4
3
1
2-21
2-22
FIGURE 22 AUTO SHEET FEEDER (3)
FIGURE
&
KEY No.
3
5
4
2
1
See page 5-4
(FIGURE 22-a)
2
PART No.
R
A
N
K
Q
T
Y
DESCRIPTION
REMARKS
22 - 1
QF5-0351-000
1 PAPER LIFTING PLATE ASS'Y
AE AUS FRN GER UK EC
2
QB1-2931-000
2 SPRING, COIL
AE AUS FRN GER UK EC
3
QB1-2922-000
3 FLAPPER, MEDIA SUPPORT
AE AUS FRN GER UK EC
4
QB1-1950-000
2 SHEET, MEDIA STOPPER
AE AUS FRN GER UK EC
5
HB1-2907-000
1 FRAME, ASF
AE AUS FRN GER UK EC
N
FIGURE 23 FUSE, POWER SUPPLY
FIGURE
&
KEY No.
23 - 1
PART No.
HY7-2660-000
R
A
N
K
Q
T
Y
DESCRIPTION
1 FUSE, 250V, 2.5A
REMARKS
AE AUS FRN GER UK EC
1
2-23
2-24
FIGURE 24 SCNT BOARD ASS’Y & PCNT BOARD ASS’Y
FIGURE
&
KEY No.
1
2
3
4
See page 5-5
(FIGURE 24-a)
PART No.
R
A
N
K
Q
T
Y
DESCRIPTION
REMARKS
24 - 1
HH4-3154-000
1 IC, LH5387G3, MASK-ROM
EC UK GER FRN AUS AE
2
WK1-5047-000
1 LITHIUM BATTERY, CR2450HC22NC
AE AUS FRN GER UK EC
3
WS1-0172-000
1 PLUG, SHORT
AE AUS FRN GER UK EC
4
HH4-2786-030
1 IC,UPD23C8000XCZ-134,MASK-ROM
AE AUS FRN GER UK EC
FIGURE 25 TELEPHONE 3 HANDSET
FIGURE
&
KEY No.
25 - 1
1
PART No.
R
A
N
K
Q
T
Y
DESCRIPTION
REMARKS
HH2-2126-000
1 HANDSET ASS'Y
GER
HH7-2127-000
1 HANDSET ASS'Y
AUS
HH7-2128-000
1 HANDSET ASS'Y
AST
HH7-2129-000
1 HANDSET ASS'Y
FIN
HH7-2130-000
1 HANDSET ASS'Y
HOL
HH7-2131-000
1 HANDSET ASS'Y
SPA
HH7-2132-000
1 HANDSET ASS'Y
SWE
HH7-2133-000
1 HANDSET ASS'Y
BEL
HH7-2134-000
1 HANDSET ASS'Y
SWI
HH7-2135-000
1 HANDSET ASS'Y
HUN
HH7-2136-000
1 HANDSET ASS'Y
POR
2-25
2-26
FIGURE 26 TELEPHONE 4 HANDSET
FIGURE
&
KEY No.
26 - 1
1
PART No.
R
A
N
K
Q
T
Y
DESCRIPTION
REMARKS
HH7-2104-000
1 HANDSET ASS'Y (USA, AG)
AE
HH7-2137-000
1 HANDSET ASS'Y
ITA
HH7-2138-000
1 HANDSET ASS'Y
UK
HH7-2139-000
1 HANDSET ASS'Y
DEN
HH7-2140-000
1 HANDSET ASS'Y
IRE
HH7-2141-000
1 HANDSET ASS'Y
NOR
HH7-2142-000
1 HANDSET ASS'Y
FRN
HH7-2143-000
1 HANDSET ASS'Y
CZ
FIGURE 27 ADJUNCTS HANDSET
FIGURE
&
KEY No.
PART No.
R
A
N
K
Q
T
Y
DESCRIPTION
27 - 1
HB1-1264-000
1 HOLDER, HANDSET CRADLE
2
WT2-5465-000
1 RIVET
REMARKS
1
2
2-27
3. TOOL
FIGURE 28 TOOLS
FIGURE
&
KEY No.
mm
0
1.2
FL
OIL G311S
PART No.
R
A
N
K
Q
T
Y
DESCRIPTION
REMARKS
28 - T1
QY9-0016-000
1 GAUGE, GAP (1.2MM)
AE AUS FRN GER UK EC
T2
TKC-0953-000
1 GREASE, FLOIL G311S (20GS)
AE AUS FRN GER UK EC
T3
HY9-0021-000
1 SCREWDRIVER, HEX HEAD (1.27MM)
AE AUS FRN GER UK EC
T4
HY9-0007-000
1 LUBE, MOLYKOTE EM-50L
AE AUS FRN GER UK EC
T5
CK-8006-000
1 ELECTRICITY GREASE (IF-20)
AE AUS FRN GER UK EC
T6
CK-0551-020
1 LUBE, PERMALUB G NO.2
AE AUS FRN GER UK EC
T1
T2
T3
See page 5-1
(FIGURE 2-b)
T5
T4
T6
3-1
4. LUBRICATIONS
4.1 Locations
4.1.2 ADF, LOWER SECTION
Some parts are lubricated with grease to ensure smooth operation and to
increase conductivity. If lubricated parts are replaced or grease is removed,
grease must be reapplied.
4.1.1 PRINTER COVER ASS’Y
PERMALUB G-2
6mg
EM-50L
Rubbing Section of
Document feed roller:
About 12mg
See Fig.2 for the disassembly
IF-20
Rubbing Section of
Grounding plate:
About 6mg
See Fig.9 and Fig.10 for the disassembly
4-1
4-2
4.1.3 PRINT ASS'Y (1)
4.1.4 PRINT ASS'Y (2) & AUTO SHEET FEEDER ASS’Y
FLOIL G311S
Both Side of
Carriage Guide Frame:
About 40 to 80 mg
FLOIL G311S
Idler Roller Shaft Section:
About 6 mg
FLOIL G311S
Paper Feed Motor Drive
Transmission: About 6 mg
FLOIL G311S
Rubbing Section of Carriage
Hook and Carriage:
About 12 mg
FLOIL G311S
Rubbing Section of Clutch
Spring and Clutch Gear:
About 12 mg
FLOIL G311S
Rubbing Section of
Carriage and Carriage Shaft:
About 60 to 100 mg
FLOIL G311S
Rubbing Section of
Cam Gear:
About 12 mg
HG5-1130
PAPER FEED ROLLER ASS`Y
FLOIL G311S
FLOIL G311S
Belt Holder: About 36 mg
See Fig.13 for the disassembly
Rubbing Section of
Paper feed roller ass`y:
About 6 mg
See Fig.16 and Fig.18 and Fig.21 for the disassembly
5. GUIDE TO REPLACEMENT
See Page
2-2
FIGURE 2-a
FIGURE 2-b
See Page
2-2
See Page
2-2
FIGURE 2-c
See Page
2-2
FIGURE 2-d
FLAT CABLE
COVER, UPPER
COVER,UPPER
GEAR
SHEET
RACK
RACK
When attaching the rack, attach the gears with the sliders When removing the COVER, UPPER, use tool HY9-0021 To remove the sheet, slide it upward and free the upper When attaching the COVER, UPPER, be sure the cables
at their narrowest width.
to prise loose the four tabs mentioned above. Be careful end first.
connecting the PCNT board to the SCNT board and the
not to damage the surface around the whole.
operation panel to the SCNT board are not pinched in the
gap.
See Page
2-3
FIGURE 3-a
FIGURE 3-b
See Page
2-3
See Page
2-3
FIGURE 3-c
See Page
2-3
FIGURE 3-d
3
4
GUIDE, CABLE
STOPPER,
OPERATION
PANEL
2
1
1
2
CLIP, CABLE
When attaching the OPERATION PANEL UNIT, attach as
per the illustration below.
When removing the part at Key No.2, prise loose the four The wiring of this unit is as per the diagram.
tabs in the illustration.
Insert the STOPPER, OPERATION PANEL aligning it with
the hole’s shape, then twist to secure it. To remove the
STOPPER, OPERATION PANEL, reverse the procedure.
5-1
5-2
See Page
2-3
FIGURE 3-e
FIGURE 3-f
See Page
2-3
See Page
2-4
FIGURE 4-a
See Page
2-5
FIGURE 5-a
Cable from
Operation panel
Cable from
Contact sensor
SCNT board
57 2mm
NCU board
Tape
FERRITE CORE
NCU board
SCNT board
Flat bladed screw driver
Tab
Place the FERRITE CORE as shown in the figure.
Fasten the cable with tape, as shown in the figure.
See Page
2-7
FIGURE 7-a
SCNT
board
Attach the cable as shown in the figure.
FIGURE 7-b
NCU board and SCNT board connections are as per the
diagram.
See Page
2-7
FIGURE 7-c
SCREW
See Page
2-7
When removing the PRINTER and ASF assembly, prise
loose the right and left tabs in the direction of the arrows.
See Page
2-8
FIGURE 8-a
Tab
108 2mm
OPERATION
PANEL
UNIT
90 2mm
Bend the FLAT CABLE, as shown in the diagram.
When removing the OPERATION PANEL UNIT and Use a screw to attach the WIRE, GROUNDING as shown When detaching this part, free the tab before removing.
UPPER GUIDE, set the LEVER, SWITCHING as shown in the figure.
Be careful not to break the tab.
in the figure.
See Page
2-8
FIGURE 8-b
See Page
2-10
FIGURE 10-a
See Page
2-10
FIGURE 10-b
FIGURE 12-a
See Page
2-12
5
Long
SCREW
Tab
2
WIRE,GROUNGING
3
Short
1
2
SPRING
1
4
SPRING
3
Attach the SPRING as shown in the figure. Use a screw to When removing the COVER, ADF, LOWER, free the three When installing the gears, follow the procedure shown in When removing the AUTO SHEET FEEDER ASS'Y
release the tabs holding the printer chassis.
the figure.
secure the long end of the WIRE, GROUNDING along with tabs shown in the figure, and pull from right to left.
the spring.
See Page
2-12
FIGURE 12-b
FIGURE 13-a
See Page
2-13
See Page
2-13
FIGURE 13-b
FIGURE 14-a
See Page
2-14
ARM, CARRIAGE
FRAME,
GUIDE CARRIAGE
Tabs
CARRIAGE RIBBON CABLE UNIT
Cables
Secure the cable from the PAPER FEED MOTOR with
the ASF tape.
CARRIAGE
Check whether the carriage ribbon cable is sandwiched When attaching the CARRIAGE ASS'Y, position the ARM, To remove the holder, use a flat bladed screwdriver to raise
between the tabs in the illustration.
CARRIAGE in front of the FRAME, GUIDE CARRIAGE. up the slanted section in the direction of the arrows, and
remove it from the carriage.
5-3
5-4
FIGURE 14-b
See Page
2-14
See Page
2-16
FIGURE 16-a
See Page
2-17
FIGURE 17-a
See Page
2-17
FIGURE 17-b
Screw
BUSHING
Remove by pushing in the direction of the arrows.
FIGURE 17-c
See Page
2-17
Rotate the BUSHING in the direction of the arrow, and If these screws are loosened, head gap adjustment will When attatching the SPRING COIL, use tweezers to
break the tab.
be required.
attach, as illustrated above.
See Page
2-18
FIGURE 18-a
FIGURE 21-a
See Page
2-21
See Page
2-22
FIGURE 22-a
2
1
BUSHING
QB1-0417
1
Marks
PA
P
PL ER
AT LI
E FT
AS IN
S' G
Y
2
SPUR ASS'Y
PURGE UNIT
In this product, the method for attaching the spur has been When removing the ARM, PAPER SENSOR, push in the To put gears in the correct posistion, the marks must be in When removing the PAPER LIFTING PLATE ASS'Y, insert
changed, so that the PURGE UNIT cannot be removed direction of the arrow ①, and move in the direction of the alignment.
a flat bladed screwdriver into location ①, and free the boss
without dismantling the machine to this level, When arrow ➁.
➁ from the FRAME, ASF.
replacing, the bushing, QB1-0417 will be broken, so have
a new one ready.
FIGURE 24-a
See Page
2-24
PLUG, SHORT
The SCNT BOARD ASS'Y does not have a PLUG, SHORT
attached.
5-5
6. NUMERICAL INDEX
PART
NUMBER
CK-0551-020
CK-8006-000
HA2-0868-000
HB1-1264-000
HB1-1598-020
HB1-1702-040
HB1-1704-070
HB1-1779-000
HB1-1784-000
HB1-2701-080
HB1-2712-000
HB1-2713-000
HB1-2714-000
HB1-2715-000
HB1-2716-000
HB1-2717-000
HB1-2721-000
HB1-2722-000
HB1-2723-000
HB1-2724-000
HB1-2733-000
HB1-2734-000
HB1-2735-000
HB1-2773-000
HB1-2775-000
HB1-2776-000
HB1-2777-050
HB1-2778-000
HB1-2781-000
HB1-2860-000
HB1-2861-000
HB1-2862-000
HB1-2863-000
HB1-2864-000
HB1-2865-000
HB1-2866-000
HB1-2867-000
HB1-2871-000
HB1-2872-000
HB1-2873-000
HB1-2874-000
HB1-2875-000
HB1-2878-000
HB1-2879-000
HB1-2881-000
HB1-2882-000
HB1-2883-000
HB1-2884-000
HB1-2885-000
HB1-2886-000
HB1-2888-000
HB1-2890-000
HB1-2891-020
FIGURE &
KEY NO.
28 28 127 20 14 14 10 82666661451177716 18 14 14 14 4888888839998811 11 10 10 2222311 10 -
T6
T5
13
1
11
5
3
5
20
9
2
1
3
6
7
5
6
4
3
2
3
3
3
15
7
8
14
4
1
18
13
10
6
11
7
4
7
3
4
2
1
19
6
9
2
13
4
3
2
1
4
4
1
DESCRIPTION
LUBE, PERMALUB G NO.2
ELECTRICITY GREASE (IF-20)
LABEL, MERCURY
HOLDER, HANDSET CRADLE
PLATE, COVER SUPPORT
GUIDE, INK CARTRIDGE
ARM, CARRIAGE
SPACER
BRUSH, STATIC DISCHARGE
COVER, UPPER
ABSORBER, WASTE INK A
ABSORBER, WASTE INK B
TRAY, RECORDING PAPER
PLATE, PAPER SUPPORT (LEFT)
PLATE, PAPER SUPPORT (RIGHT)
TRAY, PAPER EXTENTION
PLATE, CIRCUIT BOARD BASE
GUIDE, PAPER, MANUAL FEED
TRAY, EXIT DOCUMENT
TRAY, SUPPORT DOCUMENT
FACE PLATE, ONE-TOUCH DIAL
FACE PLATE, ONE-TOUCH DIAL
FACE PLATE, ONE-TOUCH DIAL
FRAME, PLATEN
FRAME, PRINTER
BASE, CARRIAGE
HOLDER, BJ CARTRIDGE
LEVER, FORMS THICKNESS
COVER, NCU
COVER, ADF, UPPER
ARM, DETECTION (DES)
ARM, DETECTION (DS)
STOPPER, DOCUMENT
ROLLER, BACK UP
SHAFT, BACK UP ROLLER
PLATE, PRESSURE
STOPPER, OPERATION PANEL
PLATE, PRESSURE
PAD, SEPARATION
HOLDER, SEPARATION GUIDE
LEVER, SWITCHING
SHEET, DOCUMENT STOP
ROLLER, DOCUMENT FEED
ROLLER, DOCUMENT EJECT
SHAFT, SEPARATION ROLLER
PLATE, GROUNDING
SLIDER, RACK
COVER, PRINTER
GUIDE, DOCUMENT, RIGHT
GUIDE, DOCUMENT,LEFT
GUIDE, CABLE
FRAME, ADF, LOWER
COVER, ADF LOWER
PART
NUMBER
HB1-2895-000
HB1-2896-000
HB1-2897-000
HB1-2898-000
HB1-2907-000
HB1-2909-000
HB1-2910-000
HB1-2911-000
HB1-2913-000
HB1-3034-000
HF5-0279-020
HF5-0303-000
HF5-0304-000
HF5-0305-000
HG5-0616-090
HG5-0886-000
HG5-1125-120
HG5-1126-000
HG5-1129-050
HG5-1130-000
HG5-1131-000
HG5-1138-000
HG5-1207-000
HG5-1224-020
HG5-1235-000
HG5-1239-000
HG5-1244-000
HG5-1245-000
HG5-1246-000
HG5-1248-000
HG5-1261-000
HG5-1262-000
HG5-1263-000
HG5-1264-000
HG5-1334-000
HG5-1335-000
HG5-1336-000
HG5-1338-000
HH2-1914-000
HH2-2074-000
HH2-2126-000
HH2-2219-000
HH2-2478-000
HH2-2522-000
HH2-2654-000
HH2-2726-000
HH2-2727-000
HH2-2728-020
HH2-2729-000
HH2-2745-000
HH2-2746-000
HH2-2747-000
HH2-2748-000
FIGURE &
KEY NO.
917 8922 777210 6811 10 4412 16 13 16 16 14 4411 888412 777711112 1125 114144416 11 8811 -
6
2
23
5
5
1
1
1
7
8
4
22
12
7
4
4
3
10
8
4
13
6
4
4
3
9
17
14
5
4
2
2
2
2
16
16
16
2
4
4
1
4
4
3
14
7
8
13
16
2
16
15
14
DESCRIPTION
HOLDER, SEPARATION
FRAME, CARRIAGE GUIDE
SHEET, LIGHT SHIELD
SHEET, SEPARATION
FRAME, ASF
SHEET, OPERATION PANEL
SHEET, OPERATION PANEL
SHEET, OPERATION PANEL
SHEET, CARTRIDGE
ROLLER, SEPARATION
MAIN FRAME ASS'Y
WHITE SHEET UNIT
PLATE, SCANNER DRIVE
PANEL HOLDER UNIT
NCU BOARD ASS'Y
NCU BOARD ASS'Y
PRINT ASS'Y
SPUR ASS'Y
CARRIAGE ASS'Y
PAPER FEED ROLLER ASS'Y
PAPER EJECT ROLLER UNIT
CARRIAGE RIBBON CABLE UNIT
NCU BOARD ASS'Y
NCU BOARD PCB ASSEMBLY
CONTACT SENSOR UNIT
SEPARATION GUIDE ASS'Y
DOCUMENT SENSOR ASS'Y
DOCUMENT EDGE SENSOR ASS'Y
SCNT BOARD ASS'Y
AUTO SHEET FEEDER ASS'Y
OPERATION PANEL ASS'Y
OPERATION PANEL ASS'Y
PART
NUMBER
HH2-2753-000
HH2-2755-000
HH2-2756-020
HH2-2810-000
HH2-2817-000
HH2-2824-000
HH3-5312-020
HH4-2786-030
HH4-3154-000
HH7-2104-000
HH7-2127-000
HH7-2128-000
HH7-2129-000
HH7-2130-000
HH7-2131-000
HH7-2132-000
HH7-2133-000
HH7-2134-000
HH7-2135-000
HH7-2136-000
HH7-2137-000
HH7-2138-000
HH7-2139-000
HH7-2140-000
HH7-2141-000
HH7-2142-000
HH7-2143-000
HH7-2172-000
HH7-2266-000
HH7-2277-000
HH7-2279-000
HS1-1063-000
OPERATION PANEL ASS'Y
OPERATION PANEL ASS'Y
CD-ROM, DRIVER SOFTWARE
CD-ROM, DRIVER SOFTWARE
CD-ROM, DRIVER SOFTWARE
PCNT BOARD ASS'Y
MODULAR CORD, 6P
MODULAR CORD (GERM)
HANDSET ASS'Y
MODULAR CORD
MODULAR CORD
WIRE, GROUNDING
CABLE UNIT
FLAT CABLE (SCNT-PCNT), 23P
FLAT CABLE (SCNT-PCNT), 19P
FLAT CABLE (SCNT-NCU)
CABLE WITH CONNECTOR, 4P
FLAT CABLE (CS-SCNT)
CABLE WITH CONNECTOR, 3P
CABLE WITH CONNECTOR, 3P
WIRE, GROUNDING
HS5-0230-000
HS5-0231-000
HS5-0232-000
HS5-0233-000
HS5-0234-000
HS5-0235-000
HS5-0236-000
HS5-0237-000
HS5-0238-000
HS5-2027-000
HS5-2070-020
HS5-2079-000
HS5-2129-000
HS5-2130-000
HS5-2131-000
HS5-2132-000
HS5-6023-030
HS5-6042-000
HT1-2107-000
HT1-2108-000
FIGURE &
KEY NO.
471841524 24 26 25 25 25 25 25 25 25 25 25 25 26 26 26 26 26 26 26 316 15 11 10 11 10 10 10 10 10 11 10 10 210 14 982888811-
10
4
10
25
12
4
3
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
5
14
1
10
9
8
11
10
12
16
17
5
15
3
6
4
2
1
21
5
8
24
12
5
11
12
DESCRIPTION
CABLE WITH CONNECTOR, 2P
FLAT CABLE (SCNT-OPCNT)
BT-FCC ADAPTER
WIRE, GROUNDING
CABLE WITH CONNECTER, 11P
MODULAR CORD, 2P
POWER SUPPLY UNIT
IC,UPD23C8000XCZ-134,MASK-ROM
IC, LH5387G3, MASK-ROM
HANDSET ASS'Y (USA, AG)
HANDSET ASS'Y
HANDSET ASS'Y
HANDSET ASS'Y
HANDSET ASS'Y
HANDSET ASS'Y
HANDSET ASS'Y
HANDSET ASS'Y
HANDSET ASS'Y
HANDSET ASS'Y
HANDSET ASS'Y
HANDSET ASS'Y
HANDSET ASS'Y
HANDSET ASS'Y
HANDSET ASS'Y
HANDSET ASS'Y
HANDSET ASS'Y
HANDSET ASS'Y
SPEAKER
INK DETECTION UNIT
PULSE MOTOR, CARRIAGE
MOTOR, DOCUMENT FEED
BUSHING
GEAR, 44T/57T
GEAR, 55T/19T
GEAR, 56T
GEAR, 34T
GEAR, 42T
GEAR, 19T
GEAR, 36T/24T
GEAR, 32T
GEAR, Z16
SPRING, CLUCH
SPRING, HOOK END COIL
SPRING, SEPARATION GUIDE
SPRING, WHITE SHEET
SPRING, SLIDER
SPRING
SPRING, WHITE SHEET
ROLLER, BACK UP
ROLLER, DELIVERY, 2
USER'S GUIDE, MULTIPASS C50
USER'S GUIDE, DESKTOP MANAGER
PART
NUMBER
HT1-3059-000
HT1-3060-000
HT1-5037-000
HT1-5038-000
HY7-2660-000
HY9-0007-000
HY9-0021-000
QB1-0409-000
QB1-0412-000
QB1-0414-000
QB1-0415-000
QB1-0417-000
QB1-0421-000
QB1-0422-000
QB1-0423-000
QB1-0425-000
QB1-0433-000
QB1-0467-000
QB1-0479-000
QB1-0480-000
QB1-0482-000
QB1-0483-000
QB1-0484-000
QB1-0485-000
QB1-0497-020
QB1-0500-000
QB1-0501-020
QB1-0502-000
QB1-0503-000
QB1-0507-000
QB1-0622-000
QB1-0664-000
QB1-0684-000
QB1-0972-000
QB1-0973-000
QB1-0974-000
QB1-0984-000
QB1-0985-000
QB1-0986-040
QB1-0987-020
QB1-0991-000
QB1-0993-020
QB1-1039-000
QB1-1045-000
QB1-1229-000
QB1-1275-000
QB1-1277-000
QB1-1278-000
QB1-1282-000
QB1-1283-000
QB1-1950-000
QB1-1952-000
QB1-1965-000
FIGURE &
KEY NO.
111123 28 28 17 18 18 18 16 16 16 16 16 20 17 21 20 21 21 21 20 13 15 13 13 13 616 17 17 13 18 18 14 14 14 14 13 14 19 13 13 16 14 16 14 14 22 19 16 -
11
12
11
12
1
T4
T3
4
4
2
3
1
6
9
2
7
7
7
3
5
7
6
8
4
7
4
1
2
3
5
3
3
6
5
5
1
7
9
12
10
11
13
3
6
4
8
16
12
15
11
4
2
11
DESCRIPTION
USER'S GUIDE, MULTIPASS C50
USER'S GUIDE, DESKTOP MANAGER
USER'S GUIDE, MULTIPASS C50
USER'S GUIDE, DESKTOP MANAGER
FUSE, 250V, 2.5A
LUBE, MOLYKOTE EM-50L
SCREWDRIVER, HEX HEAD (1.27MM)
PLATE, PRESSURE
SPRING, TORSION
HOOK, CARRIAGE
SPRING, TORSION
BUSHING
SPRING, COIL
BUSHING
SPRING, COIL
GEAR, TRANSMISSION
PAPER, GUIDE
SPRING, HOOK END COIL
GEAR, TRANSMISSION
GEAR, TRANSMISSION
SPRING, ONE WAY CLUTCH
GEAR, ONE WAY CLUTCH
GEAR, TRANSMISSION
GEAR, TRANSMISSION
HOLDER, CARRIAGE RIBBON CABLE
GEAR, SLOW DOWN
ROLLER, IDLER
BRACKET, IDLER
SPRING, COIL
FOOT, PRINTER
WASHER, PLAIN
SPRING, COIL
ROLLER, PRESSURE
GUIDE, CORNER
ARM, PAPER SENSOR
ARM, SENSOR
GUIDE, RIBBON CABLE
PAD, CONTACT
LEVER, LOCKING
SPRING, COIL
BELT, CARRIAGE
COVER, LEVER
SPUR SHAFT
PLATE, PAPER GUIDE
CLIP, SHAFT
ARM, TRANSMISSION
TAPE, CARTRIDGE INSIDE
SHAFT, ROLLER
SPRING, COIL
STOPPER
SHEET, MEDIA STOPPER
SPUR
ROLLER, TRANSMISSION
6-1
6-2
PART
NUMBER
QB1-1995-000
QB1-2192-000
QB1-2193-000
QB1-2194-000
QB1-2195-000
QB1-2197-000
QB1-2198-000
QB1-2212-000
QB1-2213-000
QB1-2217-000
QB1-2240-000
QB1-2250-020
QB1-2921-000
QB1-2922-000
QB1-2924-000
QB1-2929-000
QB1-2931-000
QF5-0351-000
QG5-0290-120
QG5-0368-000
QG5-0960-000
QH4-4108-000
QY9-0016-000
TKC-0953-000
WE8-5147-000
WE8-5407-000
WE8-5556-000
WE8-5560-000
WE8-5577-000
WK1-5047-000
WS1-0172-000
WS9-5038-000
WT2-0317-000
WT2-5465-000
WT3-5014-000
WT3-5015-000
WT3-5020-000
XA9-0476-000
XA9-0613-000
XA9-0693-000
XB1-2300-407
XB1-2300-607
XB2-7300-607
XB4-7300-609
XB4-7300-807
FIGURE &
KEY NO.
13 21 21 20 21 20 20 21 120 18 13 20 22 20 21 22 22 17 19 20 15 28 28 1411 3324 24 412 27 1112814 16 17 10 11 15 47317 21 578-
10
2
9
6
5
8
9
4
7
1
6
12
2
3
10
1
2
1
8
1
3
3
T1
T2
15
11
1
6
8
2
3
14
5
2
1
1
1
8
2
1
5
1
14
13
2
2
7
3
5
10
2
6
3
DESCRIPTION
PART
NUMBER
SHAFT, CARRIAGE
GEAR, CONTROL
GEAR, CAM
COIL SPRING HOOK END
XB5-6300-605
XB6-7300-607
PLATE, LEVER GUIDE
ROLLER, SLIP
RING, RUBBER, PICK-UP
GEAR, PICK-UP ROLLER
LID, CONTAINER
SUPPORT, PAPER
GUIDE, PRESSURE PLATE
HOLDER, BELT
GUIDE, PAPER
FLAPPER, MEDIA SUPPORT
RING, RUBBER
SEPARATER, PAPER
SPRING, COIL
PAPER LIFTING PLATE ASS'Y
PURGE UNIT
CLEANER ROLLER UNIT
PICK-UP ROLLER UNIT
MOTOR, PAPER FEED
GAUGE, GAP (1.2MM)
GREASE, FLOIL G311S (20GS)
BEAD, CRT CABLE
FERRITE CORE, FSOC410RN
FERRITE CORE
FERRITE CORE, FSOC170RT07
FERRITE CORE
LITHIUM BATTERY, CR2450HC22NC
PLUG, SHORT
SPACER, MODULAR
CLIP, CABLE
RIVET
POWER SUPPLY CORD, 230V
POWER SUPPLY CORD, 230V
POWER SUPPLY CORD, 230V
SCREW, TP M3X8
NUT, SUS
SCREW, BH(RED) M3X4
SCREW, BH3X4 (S)
SCREW, BH3X6(S)
SCREW, M3X6
SCREW, TAP, BINDING HEAD, M3X6
SCREW, TAP TIGHT, BINDING HEAD
XD2-1100-402
FIGURE &
KEY NO.
10 11 13 412 11 -
6
11
9
9
1
7
DESCRIPTION
SCREW, TP, PH3X6
SCREW, TP, M3x6
RETAINING RING (E-TYPE)
0298 SE 2.00-0
Printed on paper that
contains 60% reused paper.
HY8-30AE-000
MultiPASS C50 PARTS CATALOG
Q'TY
1
*00001*
PRINTED IN JAPAN (IMPRIME AU JAPON)
0298 SE 2.00-0
CANON INC.
Download PDF