Chevrolet | 2012 GMC Terrain Navigation System | User guide | Chevrolet 2012 GMC Terrain Navigation System User guide

Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (1,1)
2011 Chevrolet Equinox and GMC Terrain Navigation System M
Infotainment System . . . . . . 3
Navigation . . . . . . . . . . . . . . . . . 53
Introduction . . . . . . . . . . . . . . . . . 3
53
57
60
65
Phone . . . . . . . . . . . . . . . . . . . . . 101
78
80
Index . . . . . . . . . . . . . . . . . . . . . i-1
Overview . . . . . . . . . . . . . . . . . . . . . . . 4
Radio . . . . . . . . . . . . . . . . . . . . . . . 12
AM-FM Radio . . . . . . . . . . . . . . . . . 12
Satellite Radio . . . . . . . . . . . . . . . . 18
Audio Players . . . . . . . . . . . . . 18
CD/DVD Player . . . . . . . . . . . . . . .
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . .
Hard Drive Device (HDD) . . . . .
Auxiliary Devices . . . . . . . . . . . . . .
18
25
28
42
Rear Seat Infotainment . . . 43
Rear Seat Entertainment (RSE)
System . . . . . . . . . . . . . . . . . . . . . . 43
Using the Navigation
System . . . . . . . . . . . . . . . . . . . . . .
Maps . . . . . . . . . . . . . . . . . . . . . . . . . .
Navigation Symbols . . . . . . . . . . .
Destination . . . . . . . . . . . . . . . . . . . .
OnStar® Destination
Download . . . . . . . . . . . . . . . . . . . .
Configure Menu . . . . . . . . . . . . . . .
Global Positioning
System (GPS) . . . . . . . . . . . . . . .
Vehicle Positioning . . . . . . . . . . . .
Problems with Route
Guidance . . . . . . . . . . . . . . . . . . . .
If the System Needs
Service . . . . . . . . . . . . . . . . . . . . . .
Ordering Map DVDs . . . . . . . . . .
Database Coverage
Explanations . . . . . . . . . . . . . . . . .
89
90
91
91
91
92
Voice Recognition . . . . . . . . 92
Bluetooth . . . . . . . . . . . . . . . . . . . . 101
Trademarks and License
Agreements . . . . . . . . . . . . . 119
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (2,1)
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (3,1)
Infotainment System
Introduction
GENERAL MOTORS, GM, the
GM Emblem, CHEVROLET, the
CHEVROLET Emblem, and the
name Equinox, GMC, the name
Terrain are registered trademarks
of General Motors LLC.
Litho in U.S.A.
Part No. 20860354 B Second Printing
The information in this manual
supplements the owner manual.
This manual describes features
that may or may not be on your
specific vehicle either because
they are options that you did
not purchase or due to changes
subsequent to the printing of this
owner manual. Please refer to the
purchase documentation relating
to your specific vehicle to confirm
each of the features found on your
vehicle. For vehicles first sold in
Canada, substitute the name
“General Motors of Canada Limited”
for Chevrolet and GMC Motor
Divisions wherever it appears
in this manual.
Keep this manual with the owner
manual in the vehicle, so it will be
there if it is needed. If the vehicle
is sold, leave this manual in the
vehicle.
©
3
Canadian Vehicle Owners
(Propriétaires des Véhicules
Canadiens)
A French language copy of this
manual can be obtained from your
dealer or from:
On peut obtenir un exemplaire de
ce guide en français auprès du
concessionnaire ou à l'adresse
suivante:
Helm, Incorporated
P.O. Box 07130
Detroit, MI 48207
1-800-551-4123
Numéro de poste 6438
de langue française
www.helminc.com
2010 General Motors LLC. All Rights Reserved.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
4
Infotainment System
Overview
Read this manual thoroughly to
become familiar with how the
navigation system operates.
Keeping your eyes on the road and
your mind on the drive is important
for safe driving. The navigation
system has built-in features
intended to help do this. Some
features may be disabled while
driving. Note that these functions
are grayed-out. A grayed-out
function indicates it is not available
when the vehicle is moving.
All functions are available when the
vehicle is parked. Before driving:
.
Black plate (4,1)
Become familiar with the
navigation system operation,
buttons on the faceplate, and
touch-sensitive screen buttons
of the navigation system.
.
Set up the audio by presetting
favorite stations, setting the
tone, and adjusting the
speakers.
.
Set up the navigation features
before beginning to drive, such
as entering an address or a
preset destination.
.
Set up phone numbers in
advance so they can be
called easily with the press
of a single button or a single
voice command (for navigation
systems with phone capability).
{ WARNING
Taking your eyes off the road too
long or too often while using the
navigation system could cause a
crash resulting in injury or death
to you or others. Focus your
attention on driving.
{ WARNING
Avoid looking too long or too
often at the moving map on the
navigation screen. This could
cause a crash and you or others
can be injured or killed. Use the
turn-by-turn voice guidance
directions whenever possible.
Use the navigation system to:
.
Plan a route.
.
Select a destination using
various methods and choices.
.
Follow turn-by-turn route
and map guidance with voice
prompts, only if permitted by
traffic laws, controls, and
conditions.
.
Receive RDS broadcast
announcements.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (5,1)
Infotainment System
Always be alert and obey traffic
and roadway laws and instructions,
regardless of the guidance from
the navigation system. Because the
navigation system uses street map
information that does not include
all traffic restrictions or the latest
road changes, it could suggest
using a road that is now closed
for construction or a turn that
is prohibited by signs at the
intersection. Because the system
uses limited information, always
evaluate whether following the
system's directions are safe and
legal for the current conditions.
After acknowledging the start up
information you will be able to
access the NAV (navigation)
and DEST (destination) functions.
Once accessed, enter or delete
information in the navigation
system or access other functions.
See instructions later in this section.
Press OK to accept the Caution.
If OK is not selected, all buttons
except for NAV (Navigation)
and DEST (Destination) can
be accessed. Once the NAV
or DEST buttons are pressed,
this Caution screen appears
and OK must be pressed to
access the navigation map.
When getting started, set your
preferences or delete information
in the navigation system using
various options.
When the navigation system is
turned on, a screen might appear
with the information below. Read
and acknowledge the information
it contains.
Each time the vehicle is started
and the navigation system is turned
on, the Caution screen appears.
5
Chevrolet Equinox and GMC Terrain Navigation System - 2011
6
Black plate (6,1)
Infotainment System
Navigation System Overview
A. Radio Preset keys 1-6
B. SELECT (Multifunction Knob)
C. FAV (Favorite)
D. TONE
E. MENU/SEL
F.
CONFIG (Configure)
G.
} BACK
H. INFO
I.
RPT (Repeat)
J.
NAV (Navigation Screen)
K. DEST (Destination)
L.
5 / 0 (Phone/Mute)
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (7,1)
Infotainment System
M. DEL (Delete)
N.
k (Play/Pause)
O. REC (Record)
P.
Q.
NAV (Navigation) Menu
The Navigation menu screen allows
access to the navigation system
settings.
X (Eject)
SEEK l SEEK g
R. HDD/DVD AUX (Source)
S. RADIO BAND (AM, FM and XM
(if equipped))
T.
VOL/
O (Volume/Power)
2. Press NAV to toggle between a
split (map/audio) view or a full
map view.
1. Press NAV to go to the
navigation map screen.
The map and your current
vehicle location will be shown.
7
Chevrolet Equinox and GMC Terrain Navigation System - 2011
8
Black plate (8,1)
Infotainment System
Config Setup Menu
Languages
Deleting Personal Information
Press CONFIG to display the
Config Menu. This menu allows
you to access screens where
you can configure various audio,
navigation display, phone, vehicle
configuration, and time features.
To change the display language
from what the system is currently
set to, see “Vehicle Personalization”
in the index of the vehicle's owner
manual for more information.
The navigation system can record
and store destinations and personal
information such as names and
addresses.
The vehicle supports English,
French Canadian and Spanish.
The default language is English.
English and Metric Unit
Conversion
You can also use the Driver
Information Center (DIC) to
change your display's readings
between English and metric units.
See “Driver Information Center
(DIC)” in the index of the vehicle's
owner manual for more information.
To scroll through the available setup
options, press CONFIG to display
the Config Menu features. Turn and
press the MENU/SEL knob or press
the desired option.
At times, such as when you are
selling or disposing of your vehicle,
you may want to delete this
information:
.
Previous Destinations
.
Address Book, Fav Route,
Preset Destinations, and HDD
music files
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (9,1)
Infotainment System
Storing Radio Station Presets
Up to 36 preset stations can
be stored. AM, FM, and XM
(if equipped) can be mixed.
To store presets:
1. Press VOL /
system on.
O to turn the
2. If viewing a map screen,
press the source screen button,
RADIO BAND, or FAV.
3. Select the band.
4. Press SEEK l SEEK g or
turn MENU/SEL to the desired
station.
5. Press and hold one of the preset
screen buttons for more than
two seconds.
6. Repeat the steps for each
preset.
To change the number of preset
pages, see AM-FM Radio on
page 12.
Entering an Address and Point
of Interest, and Storing Preset
Destinations
To set a destination by entering a
street name:
The vehicle must be in P (Park) to
perform these operations.
2. If necessary, enter the
state/province name.
The last state/province name
is automatically recalled.
Entering an Address
Press the Config button to
display the Config Menu. Turn the
MENU/SEL knob to display Nav.
Press the MENU/SEL knob or
press the Nav screen button.
If having trouble finding a city or a
street name:
.
.
Enter the street name first
instead of the city name,
or vice versa.
Enter more characters or reduce
the number of characters to
reduce or expand the available
options.
1. Press DEST.
3. Select the street name field.
Enter the street name. Do not
enter directional information
or street type. Use the space
screen button between street
and city names. Use the
backspace q screen button to
delete an incorrect character.
A list displays if four or fewer
names are available. If there
are more than four, there is a
match counter with a number
of available streets. Press the
List screen button to view the
list and select the street.
9
Chevrolet Equinox and GMC Terrain Navigation System - 2011
10
Black plate (10,1)
Infotainment System
4. Press to select the city from the
list or enter the city name.
5. Enter the house number.
This field is automatically
selected.
6. Press OK. The address
information screen displays
the address entered.
7. Press GO if correct. The route
calculates.
8. Press the route preference
screen button for either Fastest,
Shortest, or Easiest. The chosen
route preference highlights.
9. Press the Start Guidance screen
button. The route is now ready
to be started.
See “Address Entry” under
Destination on page 65 for
more information.
Entering a Point of Interest (POI)
To set a destination by entering a
Point of Interest (POI):
1. Press VOL /
system on.
O to turn the
2. A caution could appear.
Press OK to proceed.
3. Press DEST.
4. Press the Point of Interest
screen button.
5. Enter the specific title of the
POI in the POI name space
(e.g., Washington Monument).
If four or fewer names are
available, a list displays. If more
than four are available, there is a
match counter with a number in
it, representing the number of
available POI names. Press the
List screen button to view the
list. Select the POI.
6. Press GO. The route calculates.
7. Press to select the route
preference for either Fastest,
Shortest, or Easiest. The system
highlights the route.
8. Press the Start Guidance screen
button. The route is now ready
to be started.
See “Point of Interest (POI)” under
Destination on page 65 for more
information.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (11,1)
Infotainment System
Storing Preset Destinations
1. Press the VOL /
system on.
O to turn the
2. A caution could appear.
Press OK to proceed.
3. Press NAV or DEST.
4. Enter a destination.
See Destination on page 65.
5. Press Save from the map
screen to add the current final
destination to the address book.
The address book screen
appears.
6. Press Name. An alpha-keyboard
displays. Enter the name.
7. Press and hold one of the
screen buttons at the bottom
of the screen until the text in
the button changes.
The address book entry
name appears in that preset
destination screen button and
is now available to select from
the Select Destination screen.
See “Using the Stored Preset
Destinations” next in this section
to select it as a destination.
See “Preset Destination” under
Destination on page 65.
11
Using the Stored Preset
Destinations
These destinations are available for
selection while driving.
1. Press VOL /
system on.
O to turn the
2. A caution could appear.
Press OK to proceed.
3. Press DEST.
4. Press one of the available
preset destination screen
buttons. The route calculates.
5. Press to select the route
preference for either Fastest,
Shortest, or Easiest. The system
highlights the route.
6. Press the Start Guidance screen
button. The route is now ready
to be started.
See “Preset Destination” under
Destination on page 65 for more
information.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
12
Black plate (12,1)
Infotainment System
Canceling Guidance
Guidance is canceled once you
arrive at the final destination.
To cancel guidance prior to arrival
at the final destination:
1. Press DEST.
2. Press the Cancel screen button.
3. Press Yes to confirm
cancellation.
Voice Guidance
To adjust the volume of voice
guidance prompts:
1. Press CONFIG to display the
Config Menu features. Turn the
MENU/SEL knob to display Nav.
Press the MENU/SEL knob or
press the Nav screen button to
display the other options.
2. Press the Voice Prompt screen
button.
Radio
3. Press the Voice Volume screen
button.
AM-FM Radio
4. Press + or – to increase or to
decrease the volume of the
voice prompts.
Audio Source Menu
See “Voice Volume” under Using the
Navigation System on page 53 for
more information.
Cleaning the Display
Notice: Using abrasive cleaners
when cleaning glass surfaces,
could scratch the glass. When
cleaning the glass, use only a
soft cloth and do not spray
cleaner directly on the system.
Do not apply spray cleaner directly
to the system, the cleaner could
affect the mechanical parts.
Playing the Radio
VOL / O (Volume/Power): Press
to turn the radio on or off. Turn the
knob to increase or decrease the
volume. The volume is adjusted for
the current audio source, active
navigation voice guidance, or voice
prompts.
The steering wheel controls can
also be used to adjust the volume.
See “Steering Wheel Controls” in
the Index of the vehicle owner
manual for more information.
Also, see “Radio Settings” and
“Automatic Volume” later in this
section.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (13,1)
Infotainment System
13
MENU/SEL: Turn the knob
to change the radio station.
See “Finding a Station” later in
this section for more information.
RADIO BAND: Press to select the
AM, FM, or XM (if equipped) band.
The audio sources can also be
changed by using the steering
wheel controls. See “Steering Wheel
Controls” in the Index of the vehicle
owner manual for more information.
HDD/DVD/AUX: Press to change
source to DISC, HDD, USB,
or AUX.
If the audio system is on and you
are viewing a map screen, an audio
information screen will appear at the
top of the map display.
Press the audio information screen
to display the current audio source.
The display shows a split screen
with the audio source screen on the
left side and the map or guidance
screen on the right side. Press the
Full Map button to exit the split view
screen.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
14
Black plate (14,1)
Infotainment System
Navigation Audio System
Adjusting the Speakers
Sound Menu
To adjust the speaker balance using
the Sound menu:
To access the sound menu, press
the TONE button.
.
Use the sound menu to adjust the
following features:
.
Setting the Tone
.
Adjusting the Speakers
Setting the Tone
To adjust the tone using the
sound menu:
.
Treble: Press + or − to change
the level.
.
Mid (Midrange): Press + or − to
change the level.
.
Bass: Press + or − to change
the level.
EQ Settings
Press and hold the left arrow
for more sound from the left
speakers or the right arrow
for more sound from the right
speakers. The middle position
balances the sound between
the left and right speakers.
To adjust the speaker fade:
.
Press and hold the front arrow
for more sound from the front
speakers and the rear arrow
for more sound from the rear
speakers. The middle position
balances the sound between the
front and rear speakers.
EQ (Equalization): The EQ
settings are selected through the
sound menu. EQ provides a choice
of Manual, Talk, Country, Pop, Rock,
or Classical settings.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (15,1)
Infotainment System
Radio Settings
Audio system settings or features
can be customized for:
.
To access the RADIO
settings menu:
.
Press CONFIG to display the
Config Menu features.
.
Turn the MENU/SEL to display
Radio. Press the MENU/SEL
knob or press the Radio screen
button to display other options.
Automatic Volume
Select OFF, Low, Medium,
or High sensitivity to
automatically adjust the
volume to minimize the effects
of unwanted background noise
that can result from changing
road surfaces, driving speeds
or open windows. This feature
works best at lower volume
settings where background
noise is typically louder than
the sound system volume.
.
.
Number of Favorite Pages
Change the number of
mixed-band preset pages
when using the FAV button.
Press 1 through 6 to select
the number of preset lists.
15
HDD FAV Pages (Number
of Favorite Categories for
HDD Mode)
Selects the categories such
as Playlist, Artist, Album, and
Genre to be used as a favorite
category during HDD mode.
.
DivX Registration Code
Displays the DivX registration
code used for DivX media
playback.
Finding a Station
Select the band, see “Audio Source
Menu” earlier in this section.
Turn the MENU/SEL knob to find
a radio station. To select a preset
station, press the corresponding
preset button.
See “Mixed-Band Presets” for more
information.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
16
Black plate (16,1)
Infotainment System
Seeking a Station
Press SEEK
for a station.
l SEEK g to search
Local Station List Search
Mixed-Band Presets
Up to 36 preset stations can be
stored. Each page can store
six preset stations. The presets
within a page can be from different
radio bands.
To scroll through the pages, press
FAV. The current page number
displays above the preset buttons.
The stored stations for each list
displays on the touch-sensitive
preset buttons at the bottom of
the screen. The number of preset
FAV lists can be changed.
To store a radio station to a
mixed-band preset list:
To find a list of local stations in the
current band, press the MENU/SEL
button. The radio performs a search
for available stations.
1. Press RADIO BAND, then press
AM, FM, or XM (if equipped) to
select the desired band.
2. Press SEEK l SEEK g or
turn the MENU/SEL knob to
select the station.
3. Press FAV to scroll to the list.
4. Press and hold one of the
preset buttons for more than
two seconds. The station
frequency appears on the
preset button at the bottom
of the display.
5. Repeat the steps for each preset
in each page.
To recall a preset station from a
FAV page:
1. Press FAV to scroll to the page.
2. Press the preset button.
The stored preset station
is recalled.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (17,1)
Infotainment System
Timeshift
The Timeshift feature automatically
begins recording the audio when
listening to the radio.
The recording allows playback of
content that was missed.
Timeshift stores up to 20 minutes
of content. After 20 minutes, it
removes the oldest content and
continues recording new content.
While listening to the radio, press
k to stop hearing the information
through the speaker. During this
paused time, timeshift keeps
recording. A status bar displays
the length of the recording.
To resume listening to the broadcast
at the point left off, press k again.
Timeshift stops recording and
erases the buffer when the vehicle
is turned off or the station or source
is changed.
Before turning the vehicle off, press
k so that timeshift keeps recording
for 20 minutes. If the vehicle is still
off after 20 minutes, the system
stops recording and all information
is lost. If a low battery condition
occurs, timeshift stops recording
and all information is erased.
Radio Data System (RDS)
The audio system has a Radio
Data System (RDS). RDS features
are available for use only on FM
stations that broadcast RDS
information. With RDS, the
radio can:
.
Seek to stations broadcasting
the selected type of
programming
.
Receive announcements
concerning local and national
emergencies
.
Display messages from radio
stations
17
This system relies on receiving
specific information from these
stations and only works when
the information is available.
In rare cases, a radio station could
broadcast incorrect information
that causes the radio features to
work improperly. If this happens,
contact the radio station.
The RDS system is always on.
When information is broadcast from
the current FM station, the station
name or call letters display on the
audio screen. RDS can provide a
program type (PTY) for current
programming and the name of
the program being broadcasted.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
18
Black plate (18,1)
Infotainment System
Satellite Radio
XM Categories
Audio Players
XM™ Satellite Radio Service
XM stations are organized in
categories.
CD/DVD Player
Vehicles with an XM satellite radio
tuner and an XM satellite radio
subscription can receive XM
programming.
XM is a satellite radio service
that is based in the 48 contiguous
United States and 10 Canadian
provinces. XM Satellite Radio
has a wide variety of programming
and commercial-free music,
coast-to-coast, and in digital-quality
sound. A service fee is required to
receive the XM service. For more
information, see www.xmradio.com
or call 1-800-929-2100 in the U.S.
or in Canada, www.xmradio.ca or
call 1-877-438-9677.
When XM is active, the channel
name and number, category name,
song title, and artist displays on the
screen.
Removing or Adding Categories
1. Press CONFIG. Turn the
MENU/SEL knob until Radio
displays. Press the MENU/SEL
knob to select Radio or press
the Radio screen button to
display more options within
that feature.
The player can be used for CD,
MP3, DVD audio and as a DVD
video player.
With the ignition on, insert a
CD/DVD into the slot, label side
up. The player pulls it in and
begins playing. While playing,
the navigation system is available.
2. Press Show/Hide XM Categories
screen button.
The vehicle must be in P (Park) for
video to display.
3. Press the category screen
buttons to show or hide the
category.
The CD/DVD player is only
compatible with DVDs of the
appropriate region code that is
printed on the jacket of most DVDs.
XM Radio Messages
See “XM Radio Messages” in the
vehicle owner manual for a list of
possible XM messages.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (19,1)
Infotainment System
The system is capable of playing:
There can be increased skipping,
difficulty in recording tracks, and
difficulty in finding tracks/chapters
and/or difficulty in loading and
ejecting. If these problems occur,
check the disc for damage or try
a known good disc.
.
Most audio CDs
.
CD-R
.
CD-RW
.
MP3 or unprotected WMA
formats
.
DVD-Video
To avoid damage to the CD/DVD
player:
.
DVD-Audio
.
.
DVD-R/RW
.
DVD+R/RW
When playing any compatible
recordable disc, the sound quality
can be reduced due to disc quality,
the method of recording, the quality
of the music or video that has been
recorded, or the way the disc has
been handled.
.
Do not use scratched or
damaged discs
Do not apply labels to discs.
The labels could get caught in
the player.
.
Insert only one disc at a time.
.
Keep the loading slot free of
foreign materials, liquids and
debris.
If a description label is needed, try
labeling the top of the disc using a
marking pen.
19
Loading and Ejecting Discs
To load a disc:
1. Turn the ignition on.
2. Insert a disc into the slot, label
side up. The player pulls it in
the rest of the way. If the disc is
damaged or improperly loaded,
there is an error and the disc
ejects.
The disc automatically plays once
loaded.
Press X to eject a disc from the
CD/DVD player. If the disc is not
removed within a short period of
time, it automatically is pulled back
into the player.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
20
Black plate (20,1)
Infotainment System
Playing a CD/DVD
Playing an Audio CD
A disc must be loaded to select the
source.
k (Play/Pause): Use to start,
pause, or resume play.
When a disc is loaded, the disc icon
displays.
SEEK
There are two ways to play a
CD/DVD:
.
Insert the disc and playback
starts automatically.
.
Press HDD/DVD/AUX, then
press DISC.
Use the following controls to play
the disc:
Seeks to the next track.
.
Press and hold to fast forward
through a track. Release the
button to return to playing
speed. Elapsed time displays.
SEEK
A track number displays at the
beginning of each track. Song,
Artist, and Album information
displays when available.
l (Next/FWD):
.
g (Previous/REV):
.
Press to seek to the beginning
of the current or previous track.
If the track has been playing for
less than five seconds, it seeks
the previous track. If longer than
five seconds, the current track
starts from the beginning.
.
Press and hold to fast reverse
through a track. Release the
button to return to playing
speed. Elapsed time displays.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (21,1)
Infotainment System
MENU/SEL: Turn the knob to the
right or left to go to the next or
previous track.
21
CD Menu
SELECT (Multifunction Knob):
Press to display the track list. Select
the track from the list. The system
plays the selected track and returns
to the CD screen.
Shuffle
Press the CD Menu screen button
to display the CD Menu.
This icon displays when Shuffle
mode is on. See “CD Menu.”
Shuffle: Plays the tracks randomly.
Press again to stop shuffle.
Track List: Displays the list of
tracks on the disc. Select the track.
The selected track plays and the CD
screen displays.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
22
Black plate (22,1)
Infotainment System
Playing an Audio and
Video DVD
Insert the DVD; the menu options
display on the DVD screen.
The menu options time out and
a full screen appears after about
10 seconds. Press anywhere on
the navigation system screen or
press the FAV, HDD/DVD/AUX,
or } BACK button to view the
menu screen again.
Use the screen buttons to operate
the DVD options
To view the DVD video, the vehicle
must be in P (Park) for an automatic
transmission or the parking brake
must be engaged for a manual
transmission.
There are two pages of DVD
options. Press the arrow button,
located in the bottom right corner
of the screen, to access the next
page. Only the highlighted functions
are available for use. Some menu
options are only available when the
disc is not playing.
DVD Options
Full Screen:
1. Select to hide the DVD options
and display the full video image.
2. Press anywhere on the
navigation system screen or
press the FAV, HDD/DVD/AUX,
or } BACK button to re-display
the source screen buttons.
Cursor:
1. Press to access the
cursor menu.
2. Press the multifunction knob
arrows and other cursor options
to help move through the DVD
menu. The cursor menu options
are only available if a DVD has
a menu.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (23,1)
Infotainment System
q, Q , r , R (Multifunction Knob
Arrows): Press these directional
arrows to move around the
DVD menu.
SEEK
k (Play/Pause):
2. If the chapter has played for
less than five seconds, it goes
to the previous chapter. If the
chapter has played longer than
five seconds, the current chapter
is restarted. More than one
press continues moving back
through the disc.
Press to start,
pause, or resume play.
SEEK
l (Next/FWD):
1. Press to seek to the next
chapter.
2. Press more than once to
continue moving forward through
the disc.
3. Press and hold to fast forward
through a disc. When fast
forward is active, press again
to change the speed. Elapsed
time displays.
4. Press
k to resume playing.
g (Previous/REV):
1. Press to seek to the beginning of
the current or previous chapter.
3. Press and hold to fast reverse
through a disc. When fast
reverse is active, press again
to change the speed. Elapsed
time displays. Press k to
resume playing.
MENU/SEL: Turn this knob to go to
the next or previous chapter.
23
c (Stop):
1. Press to stop the DVD.
2. Press the k button to resume
playing the DVD from where it
stopped.
3. Press twice to start the DVD
from the beginning.
Shuffle:
1. Press to play the tracks
randomly.
2. Press again to play sequential.
This button is available for DVD
audio discs.
Top Menu: Press to display the
first menu of the DVD. Availability
of this feature is dependent on
the DVD.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
24
Black plate (24,1)
Infotainment System
Menu: Press to display the menu
for the part of the DVD that is
currently playing. Availability of this
feature is dependent on the DVD
and is not available for audio DVDs.
Keypad: Press to display and
search through the chapter, track,
or menu number screen. On the
keypad, enter the title/chapter
number or the group/track number.
Search: Press to search a title.
Angle:
1. Press to adjust the viewing
angle of the DVD, depending
on the DVD, while the DVD is
playing.
2. Continue pressing to cycle
through the viewing angles.
Audio:
Error Messages
1. Press to change the audio
stream and the audio language
heard, while the DVD is playing.
If Disc Read Error displays and/or
the disc comes out, it could be for
one of the following reasons:
2. Continue pressing to cycle
through the available audio
streams or languages,
depending on the DVD.
.
The disc has an invalid or
unknown format.
.
The disc is not from a correct
region.
.
The disc is very hot. Try the disc
again when the temperature
returns to normal.
.
The road is very rough. Try the
disc again when the road is
smoother.
.
The disc is dirty, scratched, wet,
or upside down.
Subtitle:
1. Press while a DVD is playing to
view with subtitles on or off or
to change the language of the
subtitles.
2. Continue pressing to cycle
through the available subtitle
languages and to turn subtitles
off, depending on the DVD
playing.
Pan Scan: Press to adjust
widescreen film images to fit
the DVD screen display.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (25,1)
Infotainment System
The air is very humid. Try the
disc again later.
MP3
.
There could have been a
problem while burning the disc.
Playing an MP3 CD and DVD
.
The label might be caught in the
CD/DVD player.
Guidelines must be met, when
creating an MP3 disc or the CD
might not play.
.
If the CD or DVD is not playing
correctly, for any other reason,
try a known good CD or DVD.
.
Maximum of 1024 files on a disc.
.
Recorded on a CD-R or CD-RW
with a maximum capacity of
700 MB.
.
DVD-Dual Layer discs should
not be used.
.
The Artist/Album/Song Titles/
Genre information requires a
CD to be fully scanned before
the music navigator works with
these menus. Disc scanning
does not occur when the disc
is being played.
MP3 Format
The guidelines are:
.
Sampling rate: 8 kHz, 16 kHz,
22.05 kHz, 24 kHz, 32 kHz,
44.1 kHz, and 48 kHz.
.
Bit rates supported: 8, 16, 24,
32, 40, 48, 56, 64, 80, 96, 112,
128, 144, 160, 192, 224, 256,
and 320 kbps.
If any error continues, contact your
dealer.
.
Maximum number of folders is
255 with a maximum hierarchy
of eight folders.
25
Insert an MP3; the MP3 icon
displays.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
26
Black plate (26,1)
Infotainment System
SEEK
l (Next/FWD):
1. Press to seek to the next track.
2. Press again to continue moving
forward through the disc.
3. Press and hold to advance
quickly through playback.
Release the button to return
to playing speed. Elapsed
time displays.
SEEK
g (Previous/REV):
If a disc is already loaded, but you
are currently on a map screen or
listening to a different audio source,
press HDD/DVD/AUX to switch to
the disc source. A track number
appears when each track starts
to play.
1. Press to seek to the beginning
of the current or previous track.
If the track has played for less
than five seconds, it goes to the
previous track. If longer than
five seconds, the current track
restarts.
To play a disc:
2.
k (Play/Pause):
Press to start,
pause, or resume play of a
loaded disc.
Press again to continue moving
back through the disc.
3. Press and hold this button
to reverse quickly through
playback. Release the button
to return to playing speed.
Elapsed time displays.
MENU/SEL: Turn to go to the next
or previous track.
SELECT (Multifunction Knob):
1. Press to display the track list for
the current mode/folder.
2. Select the track from the list.
The system plays the selected
track and returns to the CD
screen.
DISC Menu
Press the DISC Menu screen button
or press the MENU/SEL knob while
on the Disc audio screen to display
the MP3 Music Menu.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (27,1)
Infotainment System
that folder. There might be a
delay before the list displays.
Select a song from the list to
begin playback.
.
Select any of the following category
buttons on the MP3 Music Menu to
display the corresponding category
screen:
Shuffle:
1. Press to play the tracks
randomly.
2. Press again to play the tracks
sequentially.
.
Folders/Playlists
Press to view the folders stored
on the disc. Select a folder to
view the list of all the songs in
.
Genres
Press to view the genres on the
disc. Select a genre to view a
list of all songs of that genre.
There might be a delay before
the list displays. Select a song
from the list to begin playback.
Artists
Press to view the list of artists
that have been stored on the
disc. Select an artist name to
view a list of all songs by the
artist. There might be a delay
before the list displays. Select
the desired song from the list
and it begins to play.
Albums
Press to view the albums on the
disc. Select the album to view
a list of all songs on the album.
There might be a delay before
the list displays. Select a song
from the list to begin playback.
Track List (All Songs)
Press to view a list of all songs
on the disc. There might be a
delay before the list displays.
Select a song from the list to
begin playback. Songs are
displayed based on the CD
burning application folder
and file structure used.
.
.
27
.
Song Titles
Press to display a list of all
songs on the disc. There might
be a delay before the list
displays. Select a song from the
list to begin playback. Songs are
displayed in alphabetical order
based on the Song Title ID3 tag,
if available.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
28
Black plate (28,1)
Infotainment System
Root Directory
File System and Naming
Hard Drive Device (HDD)
The root directory is treated
as a folder. All files contained
directly under the root directory
are accessed prior to any root
directory folders.
The displayed song title is taken
from the file's ID3 tag. If a song
title is not present in the ID3 tag,
the radio displays the file name
as the track name.
With a Hard Drive Device (HDD),
songs can be recorded.
Empty Directory or Folder
Preprogrammed Playlists
If a root directory or folder is empty
or contains only folders, the player
advances to the next folder in
the file structure that contains a
compressed audio file. The empty
folder(s) are not displayed or
numbered.
No Folder
When the CD only contains
compressed audio files without
any folders or playlists, all files
are located under the root folder.
The radio recognizes
preprogrammed playlists,
however, there is no editing
capability. These playlists are
treated as special folders containing
compressed audio song files.
The type of formats supported by
the HDD are:
.
MP3
.
MP3-Pro (with spectral brand
replication).
.
WMA
.
Audible.com
.
M4A
Songs can be recorded from a CD
player or a mass media storage
device connected by a USB
connector. The hard drive has
10 GB memory capacity for
storage of media files.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (29,1)
Infotainment System
For optimal recording performance
make sure the disc is clean with no
damage, otherwise the system
might partially record the track.
To select the hard drive audio
source:
Recording from a CD to the
Hard Drive
To record selected tracks from
the disc:
The speed of the recording
increases if you are listening to
another source while recording.
1. Load a CD. If a CD is already
loaded, press HDD/DVD/AUX
until the CD screen displays.
To record all tracks from the disc:
2. Press SEEK l SEEK g or
CD Menu to select a song for
recording.
1. Load a CD. If a CD is already
loaded, press REC.
29
2. Press HDD/DVD/AUX until the
CD screen displays.
3. Press REC.
3. A confirmation displays.
5. Select the song name to record.
A progress bar displays.
Press HDD/DVD/AUX; cycle
through the available audio source
until the HDD source displays or
press HDD/DVD/AUX once, and
press the HDD source screen
button.
4. Press All Songs to record all
tracks. A progress bar displays.
4. A confirmation displays.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
30
Black plate (30,1)
Infotainment System
Recording from a USB Device
to the Hard Drive
To copy all tracks from the USB
device:
1. Connect a USB device. If a USB
device is already loaded, press
HDD/DVD/AUX until the USB
screen displays.
2. Press REC.
3. A confirmation displays.
4. Press the All Songs screen
button to copy all tracks.
A progress bar displays.
To record selected tracks:
1. Connect a USB device. If a USB
device is already loaded, press
HDD/DVD/AUX until the USB
screen displays.
2. Press USB Menu to select a
song for recording.
3. Press REC.
4. A confirmation displays.
5. Select the song name to record.
A progress bar displays.
Duplicate Content
When recording starts, it checks for
duplicate content on the hard drive.
If the entire content of the CD exists
on the hard drive, it will not record.
Playing Hard Disc Drive
Content
If some or none of the content
exists, then only that content will
be copied to the hard drive.
If the same file is recorded from
USB and CD, it is possible to have
duplicate tracks.
CD Eject
If the CD ejects before the recording
process completes, only tracks that
have been completely recorded are
stored to the hard drive, incomplete
tracks are discarded.
Power Mode
If the system is turned off during a
CD or USB recording process, it
stops. When the radio is turned
back on, the recording process
does not resume automatically.
To operate while the HDD source is
active, use the following buttons:
k (Play/Pause): Press to start,
pause, or resume play of the current
media source.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (31,1)
Infotainment System
SEEK
l (Next/FWD):
1. Press to seek to the next track.
2. Press and hold to advance
quickly through playback.
Release the button to return
to playing speed. Elapsed
time displays.
SEEK
g (Previous/REV):
1. Press to seek to the beginning
of the current or previous track.
If the track has been playing
for less than five seconds, the
previous track plays. If longer
than five seconds, the current
track restarts.
2. Press and hold this button
to reverse quickly through
playback. Release the button
to return to playing speed.
Elapsed time displays.
MENU/SEL: Turn the knob to go to
the next or previous track.
SELECT (Multifunction Knob):
1. Press to display the track list.
For example, if in artist mode it
only displays the track by the
selected artist.
31
HDD Music Menu
From the HDD screen, press the
HDD Menu screen button on the
HDD screen to display the HDD
Music Menu.
2. Select the desired track from
the list. The system plays the
selected track and returns to
the HDD screen.
DEL (Delete):
1. Select the song from the HDD
Music Menu screen to delete.
2. Press DEL to delete the
selected song.
To delete an entire list of Artists,
Albums, or Genres, select the
category from the HDD Music
Menu screen.
Select any of the following buttons
on the HDD Music Menu:
Shuffle: Select to play the tracks
randomly.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
32
Black plate (32,1)
Infotainment System
More Like This:
Artist:
Genres:
1. Press this button to use
Gracenote music recognition
technology and related data to
generate a list of songs similar
to the current song.
1. Press to view the artists on the
hard drive.
1. Press to view the genres on the
hard drive.
2. Select an artist to view a list of
all songs by that artist.
2. Select a genre to view a list of
all songs of that genre.
3. Select a song from the list. Once
selected, Artist Mode displays.
3. Select a song from the list. Once
selected, Genre Mode displays.
This feature is only available with
songs recorded to the HDD from
Audio CDs, not MP3s and other
compressed audio.
Album:
When recording CDs to the HDD
there might be delays to build the
list until all the files are compressed.
2. Select an album to view a list of
all songs on the album.
Recently Saved: Press to view a
list of the 50 most recently saved
songs to the HDD. Once selected,
Recently Saved Mode displays.
2. Select a song from the list.
Playlist:
1. Press to view the playlists on the
hard drive.
2. Select a playlist to view a list of
all songs in the playlist.
3. Select a song from the list. Once
selected, Playlist Mode displays.
1. Press to view the albums on the
hard drive.
3. Select a song from the list. Once
selected, Album Mode displays.
All Songs:
1. Press to view a list of all songs
on the hard drive.
2. Select a song from the list.
Once selected, All Songs Mode
displays.
Saving HDD Favorites
During HDD playback, to save the
current song playing to a category
preset:
.
Press FAV until the FAV playlist
category displays.
.
Press and hold a preset button
until the Saved to Favorites
message displays.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (33,1)
Infotainment System
To save an entire Artist, Album,
or Genre to a FAV category preset:
.
Press FAV until the correct FAV
category appears.
.
Press and hold a preset button.
Playing HDD Favorites
USB Host Support
USB Supported Devices
.
USB flash sticks or pen drives.
.
Portable USB Hard Drives.
Special care needs to be taken
related to the power source
of these devices (USB bus
powered vs. external power).
.
Portable media adapters that
support SD Flash, Compact
Flash, or SD Micro.
1. Press FAV until the appropriate
FAV HDD category displays.
2. Select FAV from the HDD
Music Menu. Favorite Artist,
Album and Genre are in the
corresponding list.
Playing from USB
The USB connector uses the
USB 2.0.
Favorites can be played two
different ways.
Press a preset button under the
HDD screen.
33
Depending on the USB mass
storage device, some devices
might not be recognized.
Music can be played directly from
the USB device and controlled
through MP3 control functions
and menu.
A USB Mass Storage device can be
connected to the USB port to copy
compressed audio files onto the
hard drive. Content can also be
played directly from the USB
device.
The USB port is located in the
center console.
The USB icon displays when the
USB device connected.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
34
Black plate (34,1)
Infotainment System
To play a USB device:
.
Connect the USB and it begins
to play.
.
Press HDD/DVD/AUX, then
press the USB button.
While the USB source is active,
use the following to operate USB
function:
k (Play/Pause):
Press to start,
pause, or resume play of the current
media source.
SEEK
l (Next/FWD):
1. Press to seek to the next track.
2. Press and hold to advance
quickly through playback.
Release the button to return
to playing speed. Elapsed
time displays.
SEEK
g (Previous/REV):
1. Press to seek to the beginning
of the current or previous track.
If the track has been playing
for less than five seconds, the
previous track plays. If playing
longer than five seconds, the
current track restarts.
USB Music Menu: See USB Music
Menu for more information.
USB Music Menu
2. Press and hold to reverse
quickly through playback.
3. Release the button to return to
playing speed. Elapsed time
displays.
MENU/SEL: Turn the knob to go to
the next or previous track.
SELECT (Multifunction Knob):
1. Press to display the track list.
For example, if in artist mode it
only displays the track by the
selected artist.
2. Select the desired track from
the list. The system plays the
selected track and returns to
the USB screen.
Press the USB Menu button or
press the MENU/SEL button while
on the USB audio screen to display
the USB Music Menu.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (35,1)
Infotainment System
Select any of the following buttons
on the USB Music Menu:
35
Artist:
Genres:
Shuffle:
1. Press to view the artists stored
on the USB.
1. Press to view the genres stored
on the USB.
1. Select to play the tracks
randomly.
2. Select an artist to view a list of
all songs by the artist.
2. Select a genre to view a list of
all songs of that genre.
2. Select again to stop this
function.
3. Select a song from the list. Once
selected, Artist Mode displays.
3. Select a song from the list. Once
selected, Genre Mode displays.
Folder/Playlist:
Album:
1. Press to view the playlists stored
on the USB.
1. Press to view the albums stored
on the USB.
2. Select a folder/playlist to view
a list of all songs in the folder/
playlist.
2. Select an album to view a list of
all songs on the album.
Eject USB: Press when the USB
is to be removed. If the USB is
disconnected without selecting
Eject USB, the files could become
corrupted.
3. Select a song from the list.
Once selected, Folder/Playlist
Mode displays.
3. Select a song from the list. Once
selected, Album Mode displays.
All Songs:
1. Press to view a list of all songs
stored on the USB.
2. Select a song from the list.
Once selected, All Songs Mode
displays.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
36
Black plate (36,1)
Infotainment System
Playing from an iPod®
For proper operation, make sure
the iPod has the latest firmware
from Apple®. iPod firmware can be
updated using the latest iTunes®
application.
For more information, visit
www.apple.com/itunes.
Recording from the iPod to the HDD
is not supported. Media must be
recorded using a USB mass storage
device.
This feature supports the following
iPod models:
.
iPod (fifth generation or later)
.
iPod (first, second, third, forth,
and fifth generation)
.
iPod Classic
.
iPod Touch (first and second
generation)
To connect and control an iPod,
connect one end of the standard
iPod USB cable to the iPod's dock
connector. Connect the other end to
the USB port in the center console.
iPod music information displays
on the radio’s display and begins
playing through the vehicle’s audio
system.
The iPod battery recharges
automatically while the ignition
is on or in the ACC/ACCESSORY
position. When the ignition is turned
off while an iPod is connected using
the iPod USB cable, the iPod
battery stops charging and the
iPod automatically turns off.
If the iPod is a model that is not
supported, it can still be listened
to in the vehicle by connecting it
to the auxiliary input jack using a
standard 3.5 mm (1/8 in) stereo
cable. See Auxiliary Devices on
page 42 for more information.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (37,1)
Infotainment System
iPod Music Menu
Playlist:
Album:
1. Press to view the playlists that
have been stored on the iPod.
1. Press this button to view the
albums that have been stored
on the iPod.
2. Select a playlist name to view a
list of all songs in the playlist.
3. Select the desired song from
the list. Once a song has been
selected “Playlist Mode” displays
on the iPod main screen to show
that music is playing from a
playlist.
Artist:
37
2. Select an album name to view a
list of all songs on the album.
3. Select the desired song from
the list. Once a song has been
selected “Album Mode” appears
on the iPod main screen to show
that music is being played from
a specific album.
Select any of these buttons on the
iPod Music Menu to display the
corresponding screen:
1. Press this button to view the
artists that have been stored
on the iPod.
All Songs:
Shuffle:
2. Select an artist name to view a
list of all songs by the artist.
2. Select the desired song from
the list. Once a song has been
selected “All Songs Mode”
appears on the iPod main
screen to show that music is
being played from the All Songs
category.
1. Select to play the tracks
randomly.
2. Select again to stop this
function.
3. Select the desired song from
the list. Once a song has been
selected “Artist Mode” appears
on the iPod main screen to show
that music is being played from
a specific artist.
1. Press this button to view a list of
all songs stored on the iPod.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
38
Black plate (38,1)
Infotainment System
Genres:
Audio Book:
Audio Book
1. Press this button to view the
genres that have been stored
on the iPod.
1. Press this button to view the
audio books that have been
stored on the iPod.
2. Select a genre name to view a
list of all songs of that genre.
2. Select an audio book name.
The system can play back audio
book content downloaded from
www.audible.com® by either burning
it to a CD or recording it to a USB
storage device.
3. Select the desired song from
the list. Once a song has been
selected “Genre Mode” appears
on the iPod main screen to show
that music is being played from
a specific genre.
Composers:
1. Press this button to view the
composers that have been
stored on the iPod.
2. Select a composer name to
view a list of all songs of that
composer.
3. Select the desired song from
the list. Once a song has been
selected “Composer Mode”
appears on the iPod main
screen to show that music is
being played from a specific
composer.
3. Once a name has been
selected, Audio Book Mode
appears on the iPod main
screen,
Podcasts appear with the general
music. They do not have their own
category. Like the other music files,
they are searchable by title, artist,
album.
Eject iPod: Press this button to
remove the iPod. If the iPod is
disconnected without selecting this
button, the files on the iPod could
be corrupted.
Audible.com is a provider of
spoken word audio entertainment,
information, and educational
programming. The use of the
audible.com playback feature
requires that the audible.com
account be activated with the
radio. For more information on
creating an account or how to
activate the radio with your existing
account, visit www.audible.com/
caraudio. The activation process
requires the Vehicle Identification
Number (VIN) of the vehicle.
Once activated, files can be
transferred by burning them to a CD
or by using a USB storage device.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (39,1)
Infotainment System
After inserting the USB or CD
storage media, this screen displays:
Press Record All screen button to
record all available audio books.
A specific audio book to record can
be selected by pressing the Select
Book screen button.
After the files have been recorded,
eject the CD/USB external media.
39
Playing Audio Book Content
After activating and transferring
audible.com files to the system,
play the files by:
2. Press the HDD Menu, the HDD
Music Menu displays. Scroll
down to the Audio Book option
and select.
1. Press HDD/DVD/AUX until the
HDD source is selected.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
40
Black plate (40,1)
Infotainment System
3. The Audio Book screen displays
a list of the available audio
books for playback. Select
a book.
4. Select a chapter to start
playback.
5. The audio book begins
playback.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (41,1)
Infotainment System
Selecting Another Audio Book
To play a different audio book from
the one selected, return to the Audio
Book menu options.
To change the audio book currently
playing:
2. The Audio Book screen displays
a list of the available audio
books for playback. Select
a book.
1. Press the HDD Menu button or
press the MENU/SEL knob to
display the HDD Music Menu.
Scroll down to the Audio Book
option.
3. Select a chapter to start
playback.
41
Chevrolet Equinox and GMC Terrain Navigation System - 2011
42
Black plate (42,1)
Infotainment System
Changing Chapters within an
Audio Book
To change chapters within an
audio book:
Auxiliary Devices
This vehicle has an auxiliary input
jack located in the center console.
Possible auxiliary audio sources
include:
.
Laptop computer
.
MP3 player
.
Tape player
This jack is not an audio output.
Do not plug headphones into the
auxiliary input jack. Drivers are
encouraged to set up any auxiliary
device while the vehicle is in
P (Park).
4. The audio book begins
playback.
While the audio book is playing,
press the MENU/SEL knob.
The chapter list of the current book
displays. Select a chapter from the
list. To return to the current chapter
being played, select the chapter
with the checkmark located at the
right.
Connect a 3.5 mm (1/8 in) cable
from the auxiliary device to the
auxiliary input jack. When a
device is connected, the system
automatically begins playing audio
from the device over the vehicle
speakers.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (43,1)
Infotainment System
If an auxiliary device has already
been connected, but a different
source is currently active, do either
of the following to switch back to the
auxiliary source:
.
.
Press HDD/DVD/AUX
repeatedly to cycle through
all of the available audio source
screens, until the AUX source
screen is selected.
Press HDD/DVD/AUX once,
then press the AUX source
screen button.
Rear Seat
Infotainment
Rear Seat Entertainment
(RSE) System
43
To use the rear seat displays:
1. Insert a DVD into the navigation
radio or an attached auxiliary
video source.
2. Press HDD/DVD/AUX until the
AV source screen displays.
The vehicle may a DVD Rear
Seat Entertainment (RSE) system.
The RSE system works with the
vehicle's Infotainment system.
The DVD player is part of the
front radio.
The RSE system includes a radio
with a DVD player, two rear seat
video display screens, audio/video
jacks, two wireless headphones,
and a remote control. See CD/DVD
Player or the separate navigation
system manual for more information
on the vehicle's DVD system.
A DVD can play in the navigation
radio, or from an auxiliary video
source.
3. Press Rear Display 1 for left
video screen or Rear Display 2
for right video.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
44
Black plate (44,1)
Infotainment System
4. Select the video source to be
used (AUX A/V or DVD).
Before Driving
Global Off
The RSE is for rear seat
passengers only. The driver
cannot safely view the video
screen while driving.
Depending on the Infotainment
system, the RSE system may have
a Global Off feature. The Global
Off feature disables all RSE system
features. Press and hold the
radio power button for more than
three seconds for Global Off
to disable the RSE features.
A padlock icon may display on
the Infotainment screen when the
Global Off feature is on. To turn
the Global Off feature off:
In severe or extreme weather
conditions, the RSE system may
not work until the temperature
is within the operating range.
The operating range is above
−20°C (−4°F) and below
60°C (140°F). If the temperature
is outside of this range, heat or
cool the vehicle until it is within
the operating range.
.
Press and hold the radio
power button for more than
three seconds.
.
Insert or eject any disc.
.
Press the Remote Control power
button.
.
Cycle the ignition.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (45,1)
Infotainment System
Headphones
multi‐media. The wireless
headphones have an On/Off button,
channel 1/2 switch, and a volume
control. Turn the headphones off
when not in use.
Push the On/Off button to turn
on the headphones. A light on
the headphones comes on. If the
light does not come on, check the
batteries. Intermittent sound or static
can also indicate weak batteries.
See “Battery Replacement” later in
this section for more information.
A. Battery cover
B. Channel 1 or 2 switch
C. Power button
D. Volume control
E. Power indicator light
RSE includes two 2-channel
wireless headphones. Channel 1
is dedicated to the DVD player,
and Channel 2 is dedicated to any
external auxiliary device connected
to the A/V jacks. The headphones
are used to listen to various
Infrared transmitters are on the
top of the left seatback video
screen. The headphones shut off
automatically to save the battery
power if the RSE system is shut
off or if the headphones are out
of range of the transmitters for
more than three minutes. Moving
too far forward or stepping out of the
vehicle, can cause the headphones
to lose the signal or have static.
The headphones automatically
turn off after four hours of
continuous use.
45
To adjust the volume on the
headphones, use the volume
control.
For optimal audio performance, the
headphones must be worn correctly.
Headphones should be worn with
the headband over the top of the
head for best audio reception.
The symbol L (Left) appears on the
outside bottom edge of the ear cup
and should be positioned on the left
ear. The symbol R (Right) appears
on the outside bottom edge of the
ear cup and should be positioned
on the right ear.
Notice: Do not store the
headphones in heat or direct
sunlight. This could damage
the headphones and repairs will
not be covered by the warranty.
Storage in extreme cold can
weaken the batteries. Keep the
headphones stored in a cool,
dry place.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
46
Black plate (46,1)
Infotainment System
If the foam ear pads attached to
the headphones become worn or
damaged, the pads can be replaced
separately from the headphone set.
To purchase replacement ear pads,
contact your dealer.
Battery Replacement
To change the batteries:
1. Loosen the screw to the battery
door located on the left side of
the headphones.
2. Slide the battery door open.
3. Replace the two AAA batteries.
4. Replace the battery door and
tighten the screw.
Remove the batteries if the
headphones are not going to be
used for a long period of time.
Audio/Video (A/V) Jacks
If available, the A/V jacks are
located on the rear of the floor
console. They allow audio or
video cables to be connected
from an auxiliary device such
as a camcorder or a video game
system.
The A/V jacks are color coded:
.
Yellow for video input.
.
White for left audio input.
.
Red for right audio input.
Power for auxiliary devices is not
supplied by the infotainment system.
To use the auxiliary inputs of the
RSE system:
1. Connect the auxiliary device
cables to the A/V jacks.
2. Power on both the auxiliary
device and the RSE video
screen.
Changing the Source on the Video
Display Screens
The image from the auxiliary device
can be switched between the video
display screens.
To change the display:
1. Press AUX on the remote
control to change the source
of both video screens from the
DVD player to the auxiliary
device.
2. Press AUX a second time to
change the left video screen
source to the DVD player and
the right video screen to the
auxiliary device.
3. Press AUX a third time to
change the left video screen
source to the auxiliary device
and the right video screen to
the DVD player.
4. Press AUX a fourth time to
change the source of both video
screens to the DVD player.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (47,1)
Infotainment System
How to Change the RSE Video
Screen Settings
The screen display mode,
brightness, and language can
be changed from the setup
menu using the remote control.
To change a setting:
z.
Use n, q, p, o, and r to
1. Press
2.
select the settings.
3. Press z again to exit the
setup menu.
Audio Output
Video Screens
Audio from the DVD player or
auxiliary inputs can be heard
through the following:
The video screens are located in
the back of the driver and front
passenger seats.
.
Wireless Headphones
.
Vehicle Speakers
47
The RSE system transmits the
audio signal to the wireless
headphones if an audio signal is
available. See “Headphones” earlier
in this section for more information.
The front seat passengers are able
to listen to playback from the A/V
jacks through the vehicle speakers
by selecting Rear A/V as the source
on the radio.
To use the video screen:
1. Push the release button located
on the seatback console.
2. Move the screen to the desired
viewing position.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
48
Black plate (48,1)
Infotainment System
Push the video screen down into its
locked position when it is not in use,
the screen turns off automatically.
Only the left RSE seatback console
contains the infrared transmitters for
the wireless headphones, they may
be visible as eight illuminated LEDs.
These LEDs are not on the right
video screen. Both seatback
consoles contain an infrared
receiver for the remote control.
They are located at the top of
each console.
Notice: Avoid directly touching
the video screen, as damage may
occur. See “Cleaning the Video
Screen” later in this section for
more information.
Video Screen Input Jack
Remote Control
Each video screen is equipped
with a video input jack to allow
video cables to be connected
from an auxiliary device such as
a camcorder or a video game
system. This signal will override any
video provided by the RSE system;
either the DVD or Auxiliary A/V jack
source. The RSE system must be
on for this input to operate.
To use the remote control, aim it
at the transmitter window at either
seatback console and press the
button. Direct sunlight or very bright
light could affect the ability of the
RSE transmitter to receive signals
from the remote control. Check
the batteries if the remote control
does not seem to be working.
See “Battery Replacement” later in
this section. Objects blocking the
line of sight could also affect the
function of the remote control.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (49,1)
Infotainment System
If a CD, DVD, or MP3 disc is in the
Radio DVD slot, the remote control
O button can be used to turn on
the video screen display and start
the disc. The Infotainment system
can also turn on the video screen
display. See CD/DVD Player on
page 18 for more information
Use the infotainment system to turn
the video screen display on.
Notice: Storing the remote
control in a hot area or in direct
sunlight can damage it, and the
repairs will not be covered by
the warranty. Storage in extreme
cold can weaken the batteries.
Keep the remote control stored
in a cool, dry place.
Remote Control Buttons
O (Power):
Press to turn the video
screens on and off.
P (Illumination):
Press to turn
the remote control backlight on.
The backlight times out after several
seconds if no other button is
pressed.
v (Title): Press to return to
the main menu of the DVD. This
function could vary for each disc.
y (Main Menu): Press to access
the DVD menu. The DVD menu is
different on every DVD. Use the
navigation arrows to move the
cursor. After making a selection
press the enter button. This button
only operates when using a DVD.
n, q , p , o (Menu Navigation
Arrows): Use the arrow buttons to
navigate through a menu.
r (Enter):
Press to select the
highlighted choice in any menu.
49
z (Display Menu):
Press to
adjust the brightness, screen
display mode, and display the
language menu.
q (Return): Press to exit the
current active menu and return to
the previous menu. This button
operates only when the display
menu or a DVD menu is active.
c (Stop):
Press to stop playing,
rewinding, or fast forwarding a
DVD. Press twice to return to the
beginning of the DVD.
s (Play/Pause):
Press to start
playing a DVD. Press to pause a
DVD while it is playing. Press again
to continue playing.
Depending on the infotainment
system in the vehicle, DVD
playback may be slowed down
by pressing s then [. Reverse
slow play by pressing s then r.
Press s again to cancel slow play.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
50
Black plate (50,1)
Infotainment System
t (Previous Track/Chapter):
Press to go to the start of the
current track or chapter. Press
again to go to the previous track
or chapter. This button may not
work when the DVD is playing
the copyright information or the
previews.
u (Next Track/Chapter): Press
to go to the beginning of the next
chapter or track. This button might
not work when the DVD is playing
the copyright information or the
previews.
r (Fast Reverse): Press to
quickly reverse the DVD or CD.
To stop fast reversing a DVD video,
press s. To stop fast reversing
a DVD audio or CD, release r.
This button might not work when
the DVD is playing the copyright
information or the previews.
[ (Fast Forward):
Press to fast
forward the DVD or CD. To stop fast
forwarding a DVD video, press s.
To stop fast forwarding a DVD audio
or CD, release [. This button might
not work when the DVD is playing
the copyright information or the
previews.
e (Audio): Press to change audio
tracks on DVDs that have this
feature when the DVD is playing.
{ (Subtitles):
Press to turn
ON/OFF subtitles and to move
through subtitle options when a
DVD is playing.
AUX (Auxiliary): Press to switch
the video display between the DVD
player and an auxiliary source.
d (Camera): Press to change the
camera angle on DVDs that have
this feature when the DVD is
playing.
\ (Clear) (If Available):
Press
this button within three seconds
after inputting a numeric selection,
to clear all numeric inputs.
} 10 (Double Digit Entries)
(If Available): Press this button
to select chapter or track numbers
greater than 9. Press this button
before inputting the number.
1 through 0 (Numeric Keypad):
The numbered keypad provides the
capability of direct chapter or track
number selection.
Replacing the Remote Control
If the remote control becomes
lost or damaged, a new universal
remote control can be purchased.
Use a Toshiba® code set for
replacement universal remote
controls.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (51,1)
Infotainment System
Battery Replacement
To change the remote control
batteries:
1. Slide back the rear cover on the
remote control.
2. Replace the two batteries in the
compartment.
3. Replace the battery cover.
Remove the batteries from the
remote control if unused for an
extended period of time.
51
Tips and Troubleshooting Chart
Problem
Recommended Action
No power.
The ignition might not be turned to
ON/RUN or in ACC/ACCESSORY.
The picture does not fill the screen.
There are black borders on the top
and bottom or on both sides or it
looks stretched out.
Check the display mode settings
in the setup menu by pressing the
display menu button on the remote
control.
In auxiliary mode, the picture moves Check the auxiliary input
or scrolls.
connections at both devices.
The remote control does not work.
Check to make sure there is no
obstruction between the remote
control and the transmitter window.
Check the batteries to make sure
they are not dead or installed
incorrectly.
After stopping the player, I push
Play but sometimes the DVD starts
where I left off and sometimes at the
beginning.
If the stop button was pressed one
time, the DVD player resumes
playing where the DVD was
stopped. If the stop button was
pressed two times the DVD player
begins to play from the beginning
of the DVD.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
52
Black plate (52,1)
Infotainment System
Tips and Troubleshooting Chart (cont.)
DVD Display Error Messages
Problem
The DVD display error message
depends on which radio the vehicle
has. The video screen may display
one of the following:
The auxiliary source is running but
there is no picture or sound.
Sometimes the wireless headphone
audio cuts out or buzzes.
Recommended Action
Check that the RSE video screen
is in the auxiliary source mode by
pressing the AUX button on the
remote control.
Check the auxiliary input
connections at both devices.
Check for obstructions, low
batteries, reception range,
and interference from cellular
telephone towers or by using a
cellular telephone in the vehicle.
Check that the headphones are
on correctly using the L (left) and
R (right) on the headphones.
Check that the headphones are
positioned properly with the
headband across the top of
the head.
I lost the remote and/or the
headphones.
See your dealer for assistance.
The DVD is playing, but there is no
picture or sound.
Check that the RSE video screen
is sourced to the DVD player by
pressing the AUX button on the
remote control.
Disc Load/Eject Error or
Mechanical Error: There are disc
load or eject problems.
Disc Format Error or Unknown
Format: The disc is inserted with
the disc label wrong side up, or if
the disc is damaged.
Disc Region Error or Disc Error:
The disc is not from a correct
region.
No Disc Inserted: No disc is
present when X is pressed on the
infotainment system.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (53,1)
Infotainment System
DVD Distortion
Navigation
Video distortion can occur when
operating cellular phones, scanners,
CB radios, Global Position Systems
(GPS)*, two-way radios, mobile fax,
or walkie talkies.
Using the Navigation
System
It might be necessary to turn off the
DVD player when operating one of
these devices in or near the vehicle.
*Excludes the OnStar® System.
Cleaning the RSE Seatback
Console
Use only a clean cloth dampened
with clean water to clean the RSE
seatback console surface.
Cleaning the Video Screen
Use only a clean cloth dampened
with clean water. Use care when
touching or cleaning the screen as
damage could result.
Use the buttons on the navigation
system and the available touch
screen buttons on the navigation
screen to operate the system.
See Overview on page 4.
Various functions are disabled when
the vehicle is moving.
53
MENU/SEL: Turn to find a
station on the radio, or go to the
next/previous track on a CD.
SELECT (Multifunction Knob):
Press the multifunction arrows to
scroll and highlight a feature. Press
to activate the highlighted feature.
FAV (Favorite): Press FAV to open
a favorite list of stored mixed-band
preset pages. See “Radio Settings”
under AM-FM Radio on page 12
for more information.
The buttons are on the navigation
system:
TONE: Press to access the Sound
screen to adjust bass, midrange,
and treble. See AM-FM Radio on
page 12 for more information.
VOL / O (Volume/Power): Press
to turn the system on and off. Use
to adjust the volume for the audio,
OnStar®, voice guidance, and voice
recognition voice prompts.
CONFIG (Configure): Press to
adjust features for radio, navigation,
display, phone, vehicle, or time.
See Configure Menu on page 80
for more information.
Navigation Buttons
Chevrolet Equinox and GMC Terrain Navigation System - 2011
54
Black plate (54,1)
Infotainment System
INFO (Information): Press for
Weather information (if equipped)
and climate control displays
(if equipped).
RPT (Navigation Repeat): Press
to repeat the last voice guidance
prompt.
NAV (Navigation): Press to view
the vehicle's current position on
the map screen. Continue pressing
to cycle through the full map and
split screen. Full Map displays the
screen in full view, split screen
displays both map and audio
information.
DEST (Destination): Press to
plan a route through the Select
Destination menu. If route guidance
is active, press to access the Route
Menu. See Destination on page 65
for more information.
5 / 0 : See Bluetooth on page 101
for more information.
DEL (Delete): Press to delete a
song or an entire list of Artists,
Albums, or Genres from the hard
drive. See Hard Drive Device (HDD)
on page 28 for more information.
REC (Record): Press to record
songs from a CD or a mass media
storage device connected by a
USB connector. See Hard Drive
Device (HDD) on page 28 for
more information.
HDD/DVD/AUX (Source): Change
to DISC, HDD, USB, or AUX by
pressing the HDD/DVD/AUX button
until the desired source is selected.
RADIO BAND: Press to select the
AM, FM, or XM (if equipped) band.
See AM-FM Radio on page 12 for
more information.
} BACK:
Press to return to
the previous screen in a menu.
The BACK button does not work in
primary display screens, such as
phone, sound settings, configure
settings, info screens, map screen,
or audio screen.
Touch Screen Buttons
Touch screen buttons are on the
screen and are highlighted when
a feature is available. Some toggle
screen buttons highlight when active
and grey-out when inactive.
Alpha-Numeric Keyboard
Letters of the alphabet, symbols,
punctuation, and numbers, when
available, display on the navigation
screen as alpha or numeric
keyboard. The alpha keyboard
displays when data needs to be
entered.
All characters are touch screen
buttons. Press to select.
À -Ý (Accent Alphabet): To select
letters with accent symbols.
A-Z (Alphabet): To select letters
from the alphabet.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (55,1)
Infotainment System
Symbols: To select symbols.
Navigation Settings
U (Space):
The navigation menu screen
accesses the navigation system
settings.
To enter a space
between characters or the words of
a name.
The touch-sensitive buttons
available are:
Voice Prompt
q (Backspace):
The backspace
screen button is used to delete an
incorrect character that has been
selected.
To make name selection easier, the
system highlights only characters
that are available after the
previously entered one.
If a name does not display after
entry, try entering it differently.
The map database may not contain
all information.
To access:
1. Press CONFIG to display the
Config Menu.
2. Turn the MENU/SEL knob until
Nav displays, then press the
knob or press the Nav screen
button to display the other
options for this feature.
3. Select the navigation setting to
change.
This menu allows changes to the
voice features.
55
Chevrolet Equinox and GMC Terrain Navigation System - 2011
56
Black plate (56,1)
Infotainment System
Voice Volume: Adjust the
voice volume for guidance and
voice recognition prompts by
pressing − or + screen buttons or
by turning the MENU/SEL knob on
the infotainment system. Press the
Guidance Volume button to preview
the selected sound level.
Route Preference
BACK TRACK
Press the Route Preference screen
button to change route options
when a route is calculated.
Press the BACK TRACK screen
button to turn on, off, or delete the
recording and displaying of the
traveled path.
Avoid Freeway: Major roads are
avoided.
Voice Guidance: Enable or disable
voice guidance. A checkmark
indicates on.
Avoid Toll Road: Toll roads are
avoided.
Speech Confirmation Feedback:
Turns the speech confirmation
feedback on or off. A checkmark
indicates on.
Avoid Time and Seasonal
Restricted Road: Time restricted
and seasonal roads are avoided.
Avoid Ferry: Ferries are avoided.
Display Back Tracks: When
active, the traveled path displays.
Record Back Track Points: When
active, the traveled path is recorded.
Delete Back Track Points:
Deletes the recorded path.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (57,1)
Infotainment System
57
Map Database Information
Back Track Mode
Installing the DVD Map Disc
Displays map database version
information.
When pressed, the back track
feature is on. See BACK TRACK
earlier in this section.
The factory installs the map
database information on the HDD.
Show 3-D Landmark
When pressed, 3-D landmarks
display on the map screen.
Maps
This section includes basic
information needed to know
about the map database.
Map Coverage
Press the Coverage button to
view the major metropolitan
coverage area.
Low Fuel Warning
When pressed, a popup screen
displays gas station icons on the
map or lists the five nearest gas
stations.
The navigation maps are stored on
the hard drive.
For more information on map
coverage, see Database Coverage
Explanations on page 92.
An updated map disc can be
used to update the map database
information, see Ordering Map
DVDs on page 91 later in this
section.
Before updating the map database
on the HDD, read the following
steps:
1. Start the vehicle to perform the
map updating.
2. Press VOL /
system on.
O to turn the
3. Insert the map update disc into
the slot, label side up.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
58
Black plate (58,1)
Infotainment System
4. Press the Update screen button
when the Update Confirmation
screen displays.
Handling the DVD Map Disc
.
5. Enter the Authentication Code
screen button, then press Enter.
6. If the correct code is entered,
the system starts updating and
the status bar displays.
7. Press X after the map
database update is completed.
Handle the disc very carefully to
avoid contamination or flaws.
Signals might not read out
properly.
.
Use a soft cloth if the disc gets
soiled and gently wipe it out
from the center of the disc to
the outside. Do not use cleaners
or solvents.
.
Do not use the disc to rest on
while writing or drawing using
any writing utensil or attach
a seal to any of the sides or
the disc.
.
Do not keep the disc in direct
sunlight, high temperatures,
or humidity.
If the application update file is
included in the disc, the application
update is also done.
.
Place the disc back into the
original case after use.
Map Adjustments
The scale of view on the map can
be adjusted.
Map Scales
There are two methods to change
the map scale:
1. Turn the MENU/SEL knob
clockwise or counterclockwise
to zoom out or in.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (59,1)
Infotainment System
2. Press the Map scale button
which is located on the bottom
left-hand corner of the map
screen to change the zoom
level.
Scroll Features
The map scale bar times out if
the zoom level is not changed
within a few seconds.
The scale ranges from 100 m
(150 ft) to 400 km (250 mi).
To change from English to metric,
see “Driver Information Center
(DIC)” in the Index of the vehicle
owner manual.
.
To scroll within the map, press
anywhere on the map screen
and the scroll symbol displays.
.
Tap the map to center that
location on the screen.
.
Hold a finger in any direction
outside of the scroll symbol and
the map will continue to scroll
in that direction until finger is
removed.
59
.
Scroll speed increases when
touching closer to the edge of
the screen.
.
Press NAV to exit map scrolling
and return to the current vehicle
location on the map.
.
While scrolling the map, this
symbol can display the distance
to the crosshair area.
For example, this shows that the
map has been scrolled, 160 m
(0.1 mi) away from current vehicle
position.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
60
Black plate (60,1)
Infotainment System
Navigation Symbols
Following are the most common
symbols that appear on a map
screen.
The vehicle symbol indicates
the current position and heading
direction of the vehicle on the map.
The waypoint symbol marks
a set waypoint and is numbered
depending on how many have
been set.
A waypoint is a stopover destination
point added to the planned route.
The destination symbol marks the
final destination after a route has
been planned.
The estimated time and distance to
the destination are displayed.
If waypoints have been added
to the current route, each waypoint
destination displays estimated time
and distance.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (61,1)
Infotainment System
61
Heading Up view displays the
direction the vehicle is traveling
at the top of the map screen.
The shaded triangle indicates North.
Select this screen symbol to change
the view to North-up or 3-D.
This symbol indicates that the
map view is North Up: North Up
displays North at the top of the map
screen regardless of the direction
the vehicle is traveling. Press this
screen symbol to change the view
to Heading Up or 3-D.
This symbol indicates that the map
view is heading up.
Press this screen symbol to change
to 3‐D mode.
The 3-D symbol is the same as the
Heading Up symbol, but the map is
in 3-D.
These symbols indicate that the
information shown on the right side
of the map can be hidden to show a
full screen map view.
The No GPS symbol appears when
there is no Global Positioning
System (GPS) satellite signal.
This symbol indicates that a menu
is available and displays on the
left side of the screen. Press this
symbol or the MENU/SEL knob to
access the screen menu.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
62
Black plate (62,1)
Infotainment System
Driving on a Route
While driving on a route, the next
maneuver the map screen displays
is either as an Urgent maneuver or
a Non-Urgent maneuver.
Urgent Maneuver
An Urgent Maneuver is displayed
when the next maneuver is less
than or equal to 0.8 km (0.5 mi)
away on a residential road or is less
than or equal to 1.5 km (2 mi) away
on freeway.
Driving on the Freeway
Driving on the Residential Road
Non-Urgent Maneuver
A non-urgent maneuver is when
your distance to the next maneuver
is greater than 0.8 km (0.5 mi) when
driving on a residential road or is
greater than 1.5 km (2 mi) when
driving on a freeway.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (63,1)
Infotainment System
Options Available on the Map
Screen
While on route, several options are
available while viewing the map
screen. To access this menu:
See Navigation Symbols on
page 60 to learn how to change the
map view to North Up, Head Up,
or 3-D view.
When this symbol is selected, the
distance and time remaining from
the current vehicle position to the
first waypoint displays.
1. While on the Map screen.
2. Press the MENU/SEL knob
to display the menu on the
left side.
63
This menu displays if the symbol
and waypoints are entered. Select
the main map view to display the
distance and time remaining from
the current vehicle position to
any of the set waypoints or final
destination.
Save: Saves a specific location to
the Address Book.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
64
Black plate (64,1)
Infotainment System
Show POI
Select to view POI information
nearby and on route.
Edit: Press to display a list of POI
icons.
There are several Preset options on
the bottom of the screen.
1. Select the POI icon to edit.
The POI icon is replaced by
another icon that is selected
from the next menu.
2. Select the new POI icon.
3. The new icon is on the Show
POI Icons menu.
List: Displays a list of
available POIs.
Clear: Clears all selected POI on
the Show POI Icons menu.
Nearby: Displays up to 200 or
the selected POI(s) within a 32 km
(20 mi) of the current vehicle
position. The POIs can be sorted
by distance, icon, or type.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (65,1)
Infotainment System
Hide: Press to hide the POIs from
view on the map. To display, go to
the Map menu, select the Show POI
Icons menu and select the Show
option.
Destination
While destination is not set,
press DEST to access the Select
Destination screen. Several options
can be selected to plan a route by
entering destinations.
65
State/Province: Enter a
state/province name.
City: Enter a city name.
Street Name: Enter a street name.
House #: Enter a valid address
number.
Cross Street Name: Enter a
street name that intersects with
the selected street.
A checkmark displays on the right
side when the field has been
selected and the destination can
be entered. After an entry step is
completed, the checkmark moves
to the next item.
Press this button to change the full
map screen to the half map screen
and half exit information.
Traffic: Press to display nearby
traffic information and traffic events
on the planned route.
Whole Route: Press to choose
options for the entire route.
Cancel Guidance: Press to cancel
guidance of the current route.
Address Entry
Set a route by entering the
state/province name, city name,
street name, and house number.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
66
Black plate (66,1)
Infotainment System
3. Enter the city name. The city
field is automatically selected.
4. Enter the street name, this field
is automatically selected. Do not
enter directional information
or street type. Use the space
screen button between street
and city names. Use the
backspace q screen button to
delete an incorrectly entered
character.
Entering the city name first:
1. Press DEST.
2. Turn the MENU/SEL knob
until the State/Province is
selected. If necessary, enter
the state/province name by
turning the MENU/SEL knob
to scroll through the keyboard,
then press the MENU/SEL
knob or press the character or
number, as needed. The last
State/Province is automatically
recalled.
A list displays if four or fewer
names are available. If there
are more than four, there is a
match counter with a number
of available streets. Press the
List screen button to view the
list and select the street.
5. Enter the house number.
This field is automatically
selected.
6. Press OK. The address
information screen displays
the address entered.
7. Press Go if correct. The route is
calculated.
8. Press to select the route
preference either for the Fastest,
Shortest, or Easiest. The chosen
route preference highlights.
See “Navigation Settings” under
Using the Navigation System on
page 53 for more information.
9. Press the Start Guidance screen
button and start the route.
Entering the Street name first:
1. Press DEST.
2. Turn the MENU/SEL knob
until the state/province is
selected. If necessary, enter
the state/province name by
turning the MENU/SEL knob
to scroll through the keyboard,
then press the MENU/SEL
knob or press the character or
number, as needed. The last
State/Province is automatically
recalled.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (67,1)
Infotainment System
3. Select the street name field.
Enter the street name. Do not
enter directional information
or street type. Use the space
screen button between street
and city names. Use the
backspace q screen button to
delete an incorrect character.
A list displays if four or fewer
names are available. If there
are more than four, there is a
match counter with a number
of available streets. Press the
List screen button to view the
list and select the street.
8. Press to select the route
preference either for the Fastest,
Shortest, or Easiest. The chosen
route preference highlights.
See “Navigation Settings” under
Using the Navigation System on
page 53 for more information.
67
Entering by POI Name/Phone
Number
1. Press DEST.
2. Press the POI screen button.
9. Press the Start Guidance screen
button and start the route.
4. Select the city from the list or
enter the city name.
3. Enter the name or select by
phone number.
5. Enter the house number.
This field is automatically
selected.
6. Press OK. The address
information screen displays
the address entered.
7. Press Go if correct. The route is
calculated.
Point of Interest (POI)
The POI destination entry allows
selection of a destination by
providing the POI name, a city
name, or selecting from the POI list.
A list displays if four or fewer
names are available. If there
are more than four, there is a
match counter with a number
of available POI names. Press
the List screen button to view
the list.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
68
Black plate (68,1)
Infotainment System
4. Select the POI name from
the list.
5. Press Go on the confirmation
screen if the information is
correct.
6. Press to select the route
preference either for the
Fastest, Shortest, or Easiest.
7. Press the Start Guidance screen
button and start the route.
Entering a POI by City Name
1. Press DEST.
2. Press the Point of Interest
screen button.
3. Press the Browse POI
Categories screen button.
4. Press the change location
screen button.
5. Enter the new state and city.
6. Select a category, then a
sub-category.
The available POI names will
display.
7. Select the POI name.
8. If the POI is correct, press Go.
the route is calculated.
9. Press to select the route
preference either for the Fastest,
Shortest, or Easiest.
10. Press the Start Guidance
screen button and start the
route.
Selecting a POI Category
4. Select a category, then a
sub-category.
The available POI names
display.
1. Press DEST.
5. Select the POI name.
2. Press the Point of Interest
screen button.
6. If the POI is correct, press Go.
the route calculates.
3. Press the Browse POI
Categories screen button.
7. Press to select the route
preference either for the Fastest,
Shortest, or Easiest.
8. Press the Start Guidance screen
button and start the route.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (69,1)
Infotainment System
Previous Destination
Address Book
Select a destination from a list
of previous destinations. Up to
15 points that have been previously
entered can be recalled. If the
list is full, the oldest destinations
automatically are deleted once the
newest destinations are added.
5. Press to select the route
preference either for the
Fastest, Shortest, or Easiest.
See “Navigation Settings” under
Using the Navigation System on
page 53 for more information.
2. Press the Previous Destination
screen button. A list displays the
previous destinations.
3. Select the Destination.
5. Press to select the route
preference either for the
Fastest, Shortest, or Easiest.
See “Navigation Settings” under
Using the Navigation System on
page 53 for more information.
6. Press the Start Guidance screen
button and start the route.
3. Select the destination from
the list.
4. Press the Go screen button on
the confirmation screen if the
information is correct. The route
calculates.
1. Press the DEST button.
4. Press the Go screen button if
the information is correct and the
route is calculated.
69
Choose a destination by selecting
an address that has been stored in
the address book.
1. Press the DEST button.
2. Press the Address Book screen
button. A list displays the
address book entries.
6. Press the Start Guidance screen
button and start the route.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
70
Black plate (70,1)
Infotainment System
Pick From Map
Lat/Long Coordinates
Select a destination by scrolling on
the map.
Choose a destination based
on Latitude and Longitudinal
coordinates.
1. Press DEST.
3. Press the Zoom in/out arrow
button on the screen and press
the map to locate the destination
to select. Press and hold a finger
on the map to activate fast
scrolling.
6. Press the Start Guidance screen
button and start the route.
4. Press Go. The route calculates.
6. Press the Start Guidance screen
button and start the route.
4. Press Go. The route calculates.
5. Press to select the route
preference either for the
Fastest, Shortest, or Easiest.
See “Navigation Settings” under
Using the Navigation System on
page 53 for more information.
2. Press the Pick From Map screen
button. A map screen with a
scroll symbol displays.
5. Press to select the route
preference either for the
Fastest, Shortest, or Easiest.
See “Navigation Settings” under
Using the Navigation System on
page 53 for more information.
3. Enter the coordinates for the
destination in degrees, minutes,
and seconds.
Enter in the location as coordinates,
Latitude and Longitude.
1. Press DEST.
2. Press the Lat/Long screen
button.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (71,1)
Infotainment System
71
Preset Destination
Getting Started on the Route
Voice Prompt
Set a destination by selecting
from one of six previously stored
destinations. If a destination is not
set for one of the screen buttons,
the button dims and is not available
to use. See “Preset Destinations”
later in this section for information
on how to delete or add a preset
destination.
Several functions can be performed
after a destination has been
entered. Press DEST to access
the Route Menu screen.
Press Voice Volume to change the
volume of voice prompts and voice
recognition.
1. Press the DEST button.
2. Press one of the available
Preset Destination screen
buttons. The screen buttons
were stored with the name
selected. The route is
calculated.
3. Press to select the route
preference either or
Fastest, Shortest, or Easiest.
See “Navigation Settings” under
Using the Navigation System on
page 53 for more information.
4. Press the Start Guidance screen
button and start the route.
Press the Voice Guidance, Speech
Confirmation Feedback, or Traffic
Voice Prompt screen buttons to
turn voice prompts on or off for each
category. See “Navigation settings”
under Using the Navigation System
on page 53 for more information.
Detour
Cancel Guidance
From the Route screen, press the
Cancel screen button to cancel the
current route. Press Yes on the
confirmation screen to cancel or
No to continue the guidance.
To select a detour around the
current route, select the Route
screen, then select to detour 2, 5,
or 10 km (1, 3, or 5 miles). Press
the Whole Route screen button to
detour the entire route. This is only
available while driving on a route.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
72
Black plate (72,1)
Infotainment System
Turn List
Waypoints
To add a waypoint:
1. Press DEST.
2. Press the Add Waypoint
screen button. This button
is only available if the route
has been calculated.
3. Enter the waypoint by any of
the add destination methods.
See Destination on page 65 or
more information. The system
calculates and highlights the
route and the route can be
started.
To view the list of maneuvers for
the entire route, Press the Turn List
screen button from the Route Menu
screen.
Up to three waypoints can be added
to the current route, between the
start point and final destination.
The waypoints can be edited or
deleted.
4. To add more waypoints, press
DEST. Press the Add screen
button to add the waypoint in
the order desired on the route.
The system calculates and
highlights the route and the
route can be started.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (73,1)
Infotainment System
To delete a waypoint:
Route Preview
1. Press DEST.
Preview the entire route in either
direction.
2. Press the Delete Waypoint
screen button.
3. Select the waypoint to be
deleted by pressing the screen.
4. A confirmation message
displays. Press Yes to delete the
waypoint; press No to cancel
this operation. The system
calculates and highlights the
route and the route can be
started.
73
u v (Fast Reverse or Forward
Scroll): Press the fast reverse
scroll arrow to go to the start
point. Press the fast forward scroll
arrow to go to the final destination.
These buttons display once the
reverse/forward scroll button has
been selected.
j (Pause):
Pauses the route
preview, while in reverse, fast
reverse, forward, or fast forward
scroll.
s t (Reverse or Forward Skip) :
Press the reverse skip arrow to
go to the start point. Press the
forward skip arrow to go to the
final destination.
S T (Reverse or Forward
Scroll): Press the reverse scroll
arrow to go to the start point.
Press the forward scroll arrow
to go to the final destination.
Suspend/Resume Guidance
Press the Suspend/Resume
Guidance screen button to suspend
or resume guidance on the current
route.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
74
Black plate (74,1)
Infotainment System
Previous Destinations
To delete all previous destinations
from the system:
1. Press DEST.
2. Press the Previous Destination
screen button.
3. Press the Clear All screen
button.
4. Press OK to Clear All Previous
Destination, or press the Cancel
screen button to cancel this
operation.
Address Book
Options for saving to the
Address Book:
1. Scrolling on map or Pick from
Map in the Dest Menu: Scroll
to the location. Press the
MENU/SEL knob. A menu
displays on the left side of the
screen. Select the Save screen
button and the location is saved.
2. Address Entry: Enter a
destination through the
Address Entry menu. Press
the Save screen button and a
menu displays with the Save
option located on the bottom
of the screen. Select the Save
option to save this location to
the Address Book.
3. POI Menu: Select a POI. Press
the Save screen button from the
bottom of the information page
display.
4. Previous Destination: From
the Previous Destination
Menu, select the destination to
save. Press the Save screen
button at the bottom of the
information page.
To change the map icon of an
address book entry:
1. Press DEST.
2. Press the Address Book screen
button. A list displays the
address book entries.
3. Select the address book entry to
be changed.
4. Press the Edit screen button.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (75,1)
Infotainment System
75
5. Press the Change Icon screen
button.
To add or change the phone number
of an address book entry:
To add a voice tag to an address
book entry:
6. Select an icon from the list.
1. Press DEST.
1. Press DEST.
7. Press OK to save changes.
2. Press the Address Book screen
button. A list of address book
entries displays.
2. Press the Address Book screen
button. A list displays the
address book entries.
3. Select the address book entry to
be changed.
3. Select the address book entry to
be changed.
4. Press the Edit screen button.
4. Press the Edit screen button.
5. Select the Change Phone
Number screen button.
5. Press the Add Voice Tag screen
button.
6. Use the numeric keyboard to
enter or change the phone
number.
6. Speak the name after the
beep and within four seconds.
The name is repeated back.
To edit the name of an
address book:
1. Press DEST.
2. Press the Address Book screen
button. A list displays the
address book entries.
3. Select the address book entry to
be changed.
4. Press the Edit screen button.
5. Press the Change Name option.
6. Use the alpha keyboard to enter
the name.
7. Press OK to save your changes.
7. Press OK to save changes.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
76
Black plate (76,1)
Infotainment System
To delete an address book entry:
1. Press DEST.
2. Press the Address Book screen
button. A list displays the
address book entries.
3. Select the address book entry to
be deleted.
4. Press the Delete screen button.
A confirmation message
displays.
To add a preset destination from the
address book:
1. Press DEST.
2. Press the Address Book screen
button.
3. Select the address book entry to
add as a Preset. The Address
Book Information screen
displays.
4. Press the Edit button located
at the bottom of the screen by
pressing it.
5. Press and hold one of the six
preset screen buttons at the
bottom of the screen until the
text within the button changes.
6. The name appears in that preset
destination screen button and
can be selected from the Select
Destination screen.
Favorite Route
1. After the route has been
planned, press NAV until the
full map screen is shown.
To change the route name, add a
voice tag or delete a favorite route:
1. Press DEST.
2. Press the Fav Route screen
button.
3. Select the route.
4. Press the Edit screen button.
5. Select from: Change Route
Name, Add Voice Tag, or Delete
Favorite Route screen buttons.
To change the route name:
2. Press the MENU/SEL knob.
A menu displays.
1. Select the Change Route Name
screen button.
3. Turn the MENU/SEL knob to
scroll down until the Whole
Route option displays, and
press the MENU/SEL knob
or press on the Whole Route
option. The whole route map
screen displays.
2. Using the Keypad, enter
the name.
4. Press the Add Route screen
button. The route is stored as
a favorite.
3. Select the Favorite Route entry
to be edited.
4. Press OK. The new name will be
in the Favorite Route Menu.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (77,1)
Infotainment System
To add a voice tag:
77
Menu Screen Button
Map Heading
Various navigation system settings
are available through the Menu
screen button. Some options are
only available after a route is
planned.
Press to change the view to North
Up, Heading Up, or 3-D mode.
See Navigation Symbols on
page 60 for more information.
1. Press Add Voice Tag.
2. Speak the name after the beep
within four seconds. The name is
repeated back.
To delete a favorite route:
1. Press the Delete Favorite Route
screen button. The confirmation
screen displays.
2. Press Yes to delete the route
and No to cancel from deleting
the route.
1. Press NAV to view the Map
screen.
2. Press the Menu screen button or
the MENU/SEL knob.
Traffic: Press to view the Traffic
Information screen. See Configure
Menu on page 80 for more
information.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
78
Black plate (78,1)
Infotainment System
Save: Press to save a location to
the Address Book.
Show POI: Press to turn POI
on or off. Select from a list
of six pre-programmed POI
sub-categories. Scroll through
a list of categories, or select
nearby and on route options.
OnStar® Destination
Download
The Destination Download lets
an OnStar® subscriber ask the
OnStar call center to download
a destination. OnStar will send
address information and location
coordinates of the destination into
the navigation system.
Using Destination Download
If the navigation radio screen
is turned off before a download,
the system automatically turns the
screen on and displays a download
confirmation message. The radio
remains on after the download.
The navigation system displays
a “Please wait” as the address is
searched within the map database.
Press this screen button to minimize
the guidance window and expand
the map window.
Whole Route: Press to view the
entire route from starting point to
destination on the map.
Cancel Guidance: Press to stop
the current route.
OnStar Destination Download
Screen
If the address is not found within the
map database, the system may use
latitude and longitude coordinates to
locate the destination. In this case,
“Using Coordinates” displays on the
downloaded screen.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (79,1)
Infotainment System
.
.
.
If the system is unable to locate the
address, the Destination Not Found
screen below displays.
Route Guidance Not Active
If an OnStar destination is
downloaded while route guidance
is not active, the navigation system
displays a pop-up screen and does
the following screen functions:
.
Press Go, the navigation system
starts route calculation to the
destination(s) received.
.
Press the Map screen button,
the navigation system displays
the Destination Map Screen.
Press the Call screen button,
the navigation system initiates
a call with Bluetooth Phone
(if available) or OnStar
Personal Call.
Press the Save screen button,
the navigation system copies
the downloaded destination to
the address book and display
the new address book entry.
The destination saves this
download even if it is only
partial information such as
a phone number.
Select the Back screen
button, the navigation
system cancels the OnStar
destination download and
returns to the previous screen.
The downloaded address
is not added to the previous
destinations.
79
Route Guidance Active
If an OnStar destination is
downloaded while route guidance
is already active, the system
displays a pop-up screen and does
the following screen function:
.
Press Go, the navigation system
adds the downloaded destination
before the next waypoint of the
existing route (closest to the
current vehicle position).
.
All other buttons on the pop-up
screen operate as described
under Route Guidance Not
Active.
Previous Destinations
Previously downloaded OnStar
destinations are saved under
Previous Destinations in the
navigation system where they
can be accessed or saved to
the address book.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
80
Black plate (80,1)
Infotainment System
Map Destination Screen Functions
Configure Menu
XM NavTraffic™ (if equipped)
If the map screen is used to show
destination, it has map screen
capabilities such as Go, Save,
Zoom, Scroll, etc. The address is
shown at the top of the screen.
Adjust features and preferences
through the Configure Menu.
The last selected menu screen
displays. Adjust features for Sound,
Radio, Nav (navigation), Display,
or Time.
The navigation system might
have an XM NavTraffic receiver.
It is a subscription service provided
through XM Satellite Radio.
A service fee is required to
receive the XM NavTraffic service.
Real-time traffic information is
provided to fully integrate the
navigation system to display
current traffic conditions for
the chosen route.
Radio
Destination Map Screen
Press CONFIG to enter the Config
Menu features. Turn the MENU/SEL
knob until Radio displays. Press the
MENU/SEL knob or press the Radio
screen button to make changes for
radio information displayed, preset
pages, Automatic Volume, and XM
categories restore (if equipped).
See Satellite Radio on page 18
(If equipped) for more information.
A screen displays to indicate that
the XM Traffic subscription is not
activated.
If activated, traffic information
displays:
.
Unscheduled traffic incident
data, such as accidents and
disabled vehicles
.
Scheduled traffic incident data,
such as road construction and
road closures
.
Traffic flow information (rate of
speed data). Flow data might not
be available in all markets.
Nav (Navigation)
Press CONFIG to enter the Setup
menu features. Turn the MENU/SEL
knob until Nav displays. Press the
MENU/SEL knob or press the Nav
screen button.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (81,1)
Infotainment System
Traffic information is delivered to the
vehicle by the XM Radio satellites.
XM NavTraffic provides continuously
updated traffic information.
XM NavTraffic currently broadcasts
the traffic information for many
markets nationally. The service may
be available in more cities in the
future. Visit www.xmnavtraffic.com
for more details on local coverage.
Traffic Icon
When traffic conditions are found
in the local area, the Traffic Icon
appears in the lower left-side of
the map.
1. Press CONFIG. Turn the
MENU/SEL knob until Nav
displays. Press the MENU/SEL
knob or press the Nav screen
button.
3. Press the Traffic button.
This button highlights and a
checkmark displays when active.
Pressing Alert for Approaching
Traffic Events displays a screen
to notify of possible traffic events
ahead.
A single car icon displays if
there are traffic events in the
area, but none are on route.
.
A multiple car icon displays if
there are traffic events on the
route.
It could take some time to sort the
received information. The list of
traffic conditions display in the order
of distance from the vehicle, for up
to approximately 125 km (75 mi).
With a route planned, traffic events
display on the route. Not all traffic
conditions may display.
To turn XM NavTraffic on or off:
2. Press the Traffic Information
button.
.
81
The Traffic Icon has three different
condition displays. These are:
.
No icon displays if there is no
XM NavTraffic subscription or
traffic events.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
82
Black plate (82,1)
Infotainment System
To view the traffic condition location
and information on the map:
An arrow can appear before the
distance. The arrow indicates
the distance is a straight line
distance and the direction of the
event from the vehicle’s current
position. If no arrow appears, the
distance indicates how far the
event is ahead on current route.
No more than three pages of
traffic events may be viewed
while the vehicle is moving.
Press the Options screen button.
A Traffic Options menu displays.
Select the traffic related option.
1. Press NAV to show the map,
then press the MENU/SEL knob
for the map menu.
Traffic: Press to enable or disable
the traffic function.
2. Scroll down and select the
Traffic screen button. A list of
traffic conditions with distance
from the vehicle’s current
position displays.
3. Select a traffic condition to get
more detailed information.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (83,1)
Infotainment System
Traffic Flow Status — Enables or
disables the green, yellow, red and
black arrows that display beside the
roads and shows the traffic flow or
extent of a traffic event.
Show Traffic ICONS: Press to
display traffic icons on the map
screen. Also, select what traffic
information displays.
.
Black indicates a closed road
segment
.
Red indicates significantly
impaired traffic flow with average
speed of less than 40 km
(25 mph).
.
Yellow indicates slightly impaired
traffic flow with average speed
between 40 km and 73 km
(25 and 45 mph).
.
Green indicates normal traffic
flow with average speed above
73 km (45 mph).
83
Traffic flow data arrows display
on the map when scaled up
to eight miles. Closed Road,
Traffic Delays, Incidents, and
Advisories — Select the traffic
event ICONS that appear on
the map screens.
Alert for Approaching Traffic
Events: When On, if an
approaching traffic event is within
the alert range, one of two traffic
alerts display:
.
With no route planned, while on
freeways, Approaching Traffic
Event without Avoid screen
displays.
.
With route planned, Traffic
Event on Route screen displays.
If the Alert for Approaching
Traffic Events is Off, the alert
does not display.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
84
Black plate (84,1)
Infotainment System
On Route
Distance
Select Distance to display traffic
events in order of distance with the
closest event shown first.
Traffic events update approximately
every two minutes.
Scrolling to Traffic Events on
the Map
Select On Route to display all
events ahead on the current active
route. No traffic events reported on
route displays if there are none to
report.
Name
Select Name to display traffic
events in alphabetical order.
While scrolling the map, the traffic
event icons can appear indicating a
traffic event within 125 km (75 mi)
from current position. To receive
information about the traffic event,
place the crosshairs over the
traffic condition icon. Traffic events
beyond 125 km (75 mi) from current
position will not be displayed.
Select INFO to display the type
of traffic, the street name, and a
description of the traffic event.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (85,1)
Infotainment System
Traffic Event Display Categories
The following are traffic event
categories and symbols that can
appear on the display:
q (Road Closed):
Traffic Event Information
Back, Map, More, and Avoid
Use to display additional details
of a traffic event. This screen can
display when:
These buttons have common
functions across all Detailed
Traffic Event screens.
85
Road and/or
ramps closed.
o (Stopped Traffic): Traffic
stopped, stop and go traffic,
delayed and congested traffic.
p (Alert): Object on the roadway,
disabled vehicle, or dangerous road
conditions.
t (Accident):
Roadway obstructed
due to accident.
s (Road Works): Delayed traffic
due to construction.
.
Scrolling to an event on the map
and then pressing INFO.
Back: Return to the previous
screen.
.
Selecting a traffic event listed on
the Traffic Event List screen.
Map: Displays related traffic events
on the map if available.
.
Approaching a traffic event.
More: More information is available
for the traffic event.
j / r (Road Condition):
Delayed
or stopped traffic, lane blocked or
closed due to a road condition.
k (Weather):
Heavy rain, snow,
or fog weather condition.
m (Parking): Available
parking area.
l (Information):
Special event,
general information, or warning.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
86
Black plate (86,1)
Infotainment System
Avoid: Select to avoid the location
of an event on the route and
calculate a new route. The full
map screen shows the new route.
The Avoid button is only available
if the event is on the route ahead.
Traffic Voice Prompts
The traffic voice prompts are part
of the current navigation voice
prompt settings. The traffic voice
prompt can be turned on and off
by selecting Traffic Voice Prompt
in Voice Prompt on the CONFIG
Nav screen. If the navigation voice
prompts are turned off, all traffic
prompts are also turned off.
If the voice prompts are on and
an Alert for Approaching Traffic
displays, the related voice prompt
is provided.
RPT (Repeat) does not repeat traffic
prompts, only navigation traffic
maneuvers. The current prompt
playback cancels if RPT is pressed
during a traffic voice prompt.
Traffic Condition Symbols
The following are traffic condition
symbols may display:
Traffic prompts are disabled during
OnStar® (if equipped) or Voice
Recognition activity.
Alternate Route
When Detour Available displays, a
possible quicker route is available
and an alternate route can be
selected to detour around the traffic
condition. Press Yes and a new
route is calculated. This option is
only available when the multiple
car icon appears.
XM NavTraffic information might not
be provided for the alternate route,
depending on what type of road the
vehicle is traveling on.
Stopped Traffic
Traffic Jam
Accident
Road Closed
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (87,1)
Infotainment System
XM™ Weather (if equipped)
87
Extended Forecast
Press INFO, then press INFO again
until the Weather screen button
is selected or press the Weather
screen button.
Lane Narrows
Road work,
Construction
Current Condition
Press INFO until the Weather
screen is selected to show the
current weather condition of the
city of the vehicle’s current position.
Allow up to 15 minutes for the
current weather in the area to
display.
Alert
Road Condition
Road Visibility
Other
Select the Menu button by pressing
the Enter screen button or press
the Menu button on the screen to
show the Weather Menu screen.
From this screen, select the
Extended Forecast screen button.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
88
Black plate (88,1)
Infotainment System
Weather Along the Route
If a destination is set while driving
along the route, there is the option
to view weather conditions for up to
three locations:
.
Current vehicle’s position.
.
Midway point from current
position to final destination.
.
The current weather condition of
the destination city.
From the XM Weather Menu
Screen, select Along the Route:
Weather Alerts
From the XM Weather Menu,
select Weather Alerts to display any
current weather advisory warnings
in effect near the current position.
Display
Press CONFIG to enter the Config
Menu features. Turn the MENU/SEL
knob until Display appears. Press
the MENU/SEL knob or press the
Display screen button.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (89,1)
Infotainment System
Dimming Mode
Setting the Clock
Auto (Automatic): Automatically
adjust the screen background
depending on exterior lighting
conditions.
To set the time:
Day: The map background
brightens.
Night: The map background
darkens.
To change the overall brightness
setting for the display, use the
vehicle interior lighting dimming
control.
1. Press CONFIG to enter the
Config Menu features. Turn
the MENU/SEL knob until Time
displays. Press the MENU/SEL
knob or press the Time screen
button.
2. Press the Hours and
Minutes – and + signs to
decrease and to increase
the time.
12/24 HR Format: Press the 12 HR
screen button for standard time;
select the 24 HR screen button
for military time.
Day + or Day −: Press the day + or
day − display buttons to increase or
decrease the day.
Display: Press the Display screen
button to turn the display of the
clock on the screen on or off.
89
Global Positioning
System (GPS)
The position of the vehicle is
determined by using satellite
signals, various vehicle signals,
and map data.
At times, other interferences such
as the satellite condition, road
configuration, the condition of the
vehicle and/or other circumstances
can interfere with the navigation
system's ability to determine the
accurate position of the vehicle.
The GPS shows the current position
of the vehicle using signals sent
by the GPS Satellites. When the
vehicle is not receiving signals from
the satellites, a symbol appears on
the map screen. See Navigation
Symbols on page 60.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
90
Infotainment System
This system might not be available
or interferences can occur if any of
the following is true:
.
.
.
Black plate (90,1)
Signals are obstructed by tall
buildings, trees, large trucks,
or a tunnel.
Objects are located on the rear
shelf of the vehicle.
Satellites are being repaired or
improved.
For more information if the GPS
is not functioning properly, see
“If the System Needs Service” and
“Problems with Route Guidance.”
Vehicle Positioning
At times, the position of the vehicle
on the could be inaccurate due
to one or more of the following
reasons:
.
The road system has changed.
.
The vehicle is driving on slippery
road surfaces such as in sand,
gravel and/or snow.
.
The vehicle is traveling on
winding roads or long straight
roads.
.
The vehicle changes directions
more than once, or when the
vehicle is turning on a turn table
in a parking lot.
.
The vehicle is entering and/or
exiting a parking lot, garage or a
lot with a roof.
.
The GPS signal is not received.
.
A roof carrier is installed on the
vehicle.
.
Tire chains have been installed.
.
The tires are replaced or worn.
.
The vehicle is approaching a tall
building or a large vehicle.
.
The tire pressure for the tires is
incorrect.
.
The surface streets run parallel
to a freeway.
.
The first navigation use after the
map data is updated.
.
The vehicle has been transferred
by a vehicle carrier or a ferry.
.
The battery is disconnected for
several days.
.
The current position calibration
is set incorrectly.
.
.
The vehicle is traveling at high
speed.
The vehicle is driving in heavy
traffic where driving is at low
speeds, and the vehicle is
stopped and started repeatedly.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (91,1)
Infotainment System
Problems with Route
Guidance
Inappropriate route guidance can
occur under one or more of the
following conditions:
.
The turn was not made on the
road indicated.
.
Route guidance might not be
available when using automatic
rerouting for the next right or
left turn.
.
The route might not be changed
when using automatic rerouting.
.
There is no route guidance when
turning at an intersection.
.
Plural names of places might be
announced occasionally.
.
It could take a long time to
operate automatic rerouting
during high-speed driving.
.
Automatic rerouting might
display a route returning to the
set waypoint if heading for a
destination without passing
through a set waypoint.
.
The route prohibits the entry
of a vehicle due to a regulation
by time or season or any other
regulation which may be given.
.
Some routes might not be
searched.
.
The route to the destination
might not be shown if there
are new roads, if roads have
recently changed or if certain
roads are not listed in the map
data. See Maps on page 57
for more information.
To recalibrate the vehicle's position
on the map, park the vehicle with
the engine running for two to
five minutes, until the vehicle
position updates.
91
If the System Needs
Service
If the navigation system needs
service and the steps listed here
have been followed but there are
still problems, see your dealer for
assistance.
Ordering Map DVDs
The map data in the vehicle is
the most up-to-date information
available when the vehicle was
produced. The map data is updated
periodically, provided that the map
information has changed.
For questions about the operation of
the navigation system or the update
process, contact the GM Nav Disc
Center toll‐free phone number,
1‐877‐NAV‐DISC (1‐877‐628‐3472)
or go to the center's website,
www.gmnavdisc.com. If updates
are needed, call the GM Nav Disc
Center or order a new disc online.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
92
Black plate (92,1)
Infotainment System
To order a disc, have the vehicle's
Vehicle Identification Number (VIN)
available. This helps the center
make sure that the correct and most
up-to-date DVD map disc for the
vehicle is received. See “Vehicle
Identification Number (VIN)” in the
Index of the vehicle owner manual
for more information.
Voice Recognition
Using Voice Recognition
The navigation system's voice
recognition allows for hands free
operation of the navigation system
and the audio system features.
Voice recognition only works if the
map database is installed in the
system.
1. Press and release the b / g
steering wheel control button.
The audio system mutes, and a
beep is heard. A voice prompt
stating, “Please start speaking
after the beep” might be heard.
After receiving the updated disc,
see Maps on page 57 for more
information.
If the radio is off, the only
commands would be Hands
Free and Help.
Database Coverage
Explanations
Navigation voice commands are not
available until the I Agree button
has been selected.
Coverage areas vary with respect to
the level of map detail available for
any given area. Some areas feature
greater levels of detail than others.
If this happens, it does not mean
there is a problem with the system.
As the map data is updated, more
detail can become available for
areas which previously had limited
detail. See Ordering Map DVDs on
page 91 for more information.
Voice recognition can be used when
the ignition is on or when Retained
Accessory Power (RAP) is active.
See “Retained Accessory Power
(RAP)” in the index of the vehicle's
owner manual for more information.
If there is no beep, make sure
that the voice volume setting is
not turned down. See Using the
Navigation System on page 53
for more information.
While voice recognition is active,
the system displays a b / g
symbol.
2. Clearly speak one of the
commands listed later in this
section.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (93,1)
Infotainment System
Canceling Voice Recognition
1. Press and release the $ / c
steering wheel control button
to cancel a command, or if the
system response does not
match the verbal command.
Helpful Hints for Speaking
Commands
.
When a multiple command is
available, choose the command
that best works for you.
.
Words that are in brackets
are optional. For example, the
command “Radio [band] FM,”
saying “Radio FM” or “Radio
Band FM” are both valid
commands.
2. The system replies, “Voice
recognition canceled.”
Pressing any other radio or
steering wheel control, other
than the volume knob or the
volume steering wheel control
button cancels the session.
.
3. Press and release the talk
symbol steering wheel control
button to restart the voice
recognition session.
.
Words that are separated by
a ( / ) mean there is a choice
of using a word on either side
of the slash. For example, the
command (CD/DVD/Disc) [help],
you can say “CD [help]” or
“DVD [help]” or “Disc [help].”
When the system recognizes the
command the system will either
perform the function or ask to
confirm the choice by clearly
saying “yes” or “no.”
93
.
When the system does not
recognize the command, the
system issues an error message
such as “pardon” or “command
not recognized.” The system
could also say, “voice
recognition canceled.”
.
If experiencing difficulty with the
system recognizing a command,
confirm that the command is
correct. Try saying the command
clearly or wait for a brief moment
after the beep.
.
Background noise such as a
climate control fan positioned
on high, open windows, and
very loud outside noises, even
if the windows are closed, can
cause voice commands to be
misunderstood.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
94
.
.
Black plate (94,1)
Infotainment System
This system is able to recognize
commands in different
languages, such as English,
French Canadian, and Spanish.
The system only recognizes
commands based on the
language selected.
To increase or decrease the
voice volume during a voice
recognition session, turn the
volume knob of the radio,
or press the volume steering
wheel control buttons. If the
volume is adjusted during a
voice recognition session, a
Voice Volume bar appears on
the screen showing the voice
volume level as it is being
adjusted. This also changes the
volume of the guidance prompts.
Voice Recognition Help
To enter the help playback session,
clearly speak one of the help
commands.
Help: Specific help commands
(such as Radio Help, Display Help,
Navigation Help) for the user to
choose from.
Radio [help]: Helpful advice
about radio commands, and some
common radio commands which
are available. Use this command
to learn about how to select a
band AM, FM, or XM (if equipped),
and how to change radio stations
(by speaking frequency numbers).
(CD/DVD/ Disc) [help]: Helpful
advice about disc commands, and
some common disc commands
which are available. Use this
command to learn about how to
select Disc mode playback, and
how to change track numbers.
Display [help]: Helpful advice
about display commands, and some
common display commands which
are available to adjust the display
setting.
Navigation [help]: Helpful advice
about navigation commands,
and some common navigation
commands which are available.
Voice Recognition Commands
The following list shows the
voice commands available for
the navigation system with a brief
description of each. The commands
are listed with the optional words
in brackets. To use the voice
commands, see the instruction
listed previously.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (95,1)
Infotainment System
95
Display Commands
Radio Commands
CD/DVD/Disc Commands
Display [set] day [mode], display
[select] day [mode]: Instructs the
system to switch the display to
day mode.
Radio AM, radio [band] AM, radio
FM, radio [band] FM, radio XM
(if equipped), radio [band] XM
(if equipped): Instructs the system
to go to either the AM, FM, or XM
(if equipped) radio bands.
The following commands are only
available when a CD, MP3, or DVD
is loaded.
Radio select [frequency] AM,
radio select [frequency] FM:
Instructs the system to go to a
specific frequency on either the
AM or FM band. For example,
radio select ninety seven point one
FM or radio select ten forty AM.
Radio CD select (track number),
radio DVD select (track number),
radio disc select (track number):
Instructs the system to play
a specific track on the Disc.
For example, radio disc select ten.
This command supports up to
254 tracks.
Display [set] night [mode],
display [select] night [mode]:
Instructs the system to switch the
display to night mode.
Display [set] auto [mode], display
[select] auto [mode]: Instructs
the system to switch the display to
auto mode.
Display [help]: Instructs the
system to play back helpful advice
about display commands, and some
common display commands which
are available to adjust the display
setting.
Radio select [channel] XM
(if equipped): Instructs the
system to go to a specific channel
on the XM™ band (if equipped).
For example, radio select one fifty
one XM.
Radio [help]: Instructs the system
to play back some helpful advice
about radio commands, and some
common radio commands which
are available to the user.
Radio CD, radio DVD, radio
Disc: Instructs the system to go to
Disc mode.
CD [help], DVD [help], disc
[help]: Instructs the system to
play back helpful advice about disc
commands, and some common disc
commands which are available.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
96
Black plate (96,1)
Infotainment System
General Navigation Commands
Feedback on, feedback off:
Instructs the system to turn on and
off the voice recognition feedback.
When feedback is ON, the system
responds to commands with a talk
back phrase. When feedback is
OFF, the system responds to
commands with a chime.
Navigation voice [guidance] on,
navigation voice [guidance] off:
Instructs the system to turn on and
off voice guidance prompts during
route guidance.
Cancel: Instructs the system to
cancel the command.
Point of Interest (POI)
Commands
The following is a list of POI
commands. POIs only display on
the map screen if the map scale
is 800 m (0.50 mi) or less. If POIs
display on a map with the wrong
scale, the system reminds that this
cannot be done. The available POI
commands are:
Navigation show gas station[s],
navigation show gas, navigation
hide gas station[s], navigation
hide gas: Instructs the system to
display and hide gas station POIs
on the map screen.
Navigation show restaurant[s],
navigation show dining,
navigation hide restaurant[s],
navigation hide dining: Instructs
the system to display and hide
restaurant POIs on the map screen.
Navigation show ATM[s],
navigation hide ATM[s]: Instructs
the system to display and hide ATM
POIs on the map screen.
Navigation show hotel[s],
navigation hide hotel[s]: Instructs
the system to display and hide hotel
POIs on the map screen.
Navigation show airport[s],
navigation hide airport[s]:
Instructs the system to display
and hide airport POIs on the map
screen.
Navigation show shop[s],
navigation show shopping,
navigation hide shop[s],
navigation hide shopping:
Instructs the system to display
and hide shopping POIs on the
map screen.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (97,1)
Infotainment System
Destination and Guidance
Commands
Navigation [go to] preset
destination [number] (one, two,
three, four, five, or six): Instructs
the system to set one of the preset
destinations one through six as the
new destination.
Then, say the desired city name
when prompted, and say the desired
street name and house number
when prompted.
97
If the state is correct, then go to
Step 4. Otherwise, say “Change
State”.
For example, if Cedar Point
Amusement Park is the set
destination, which has the
following address:
Navigation delete: Instructs the
system to delete the destination,
route, or next waypoint. The system
requests a confirmation of which
item should be deleted (destination,
route, or next waypoint).
Cedar Point Amusement Park
Destination (available for English
language only): Instructs the
system that the user wants to
enter a destination using voice
recognition. After this command
is stated, the system displays a
state abbreviation (such NY for
New York). If the destination to be
entered is located in the displayed
state, then say the desired city
name. Otherwise, say “Change
State” and say the state name
the search should take place in.
1. Press and release the b /
steering wheel control.
The audio system mutes,
and a beep is heard.
1 Cedar Point Drive
Sandusky, OH 44870
Set the Destination by using Voice
Recognition:
g
2. Say the command “Destination”.
The system replies with “Please
say city name or change state”,
and the system shows a pop-up
list of an abbreviated state
name, such as NY for New York.
For example, if the desired
destination is in Ohio, but the
system shows New York (NY)
in the pop-up list, say “Change
State”.
3. After saying, “Change State”, the
system replies with “Please say
state name”. Say the correct
state.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
98
Black plate (98,1)
Infotainment System
The state name displays.
In some cases the radio shows
a candidate list with the closest
matches to the spoken state
name. The system asks the
user to select an item from the
candidate list either by pressing
the desired choice, or by saying
the list number of the desired
choice.
4. The system asks the user
to say the city name. As shown
earlier, the radio can display a
candidate list with the closest
matches to the spoken city
name. Say the correct
city name.
5. Reply with the street name
including the suffix (Blvd, Ave,
Rd, etc.), when prompted.
The radio might display a
candidate list with the closest
matches to the spoken street
name. Say the correct
street name.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (99,1)
Infotainment System
6. Reply with the house number
with prompted. The radio might
display a candidate list with the
closest matches to the spoken
house number. Say the house
number as single digit.
7. Confirm the correct address is
displayed, then reply with yes or
no, when prompted.
8. This address is now set as
the destination. Select the
Start screen button to begin
destination guidance.
99
Chevrolet Equinox and GMC Terrain Navigation System - 2011
100
Black plate (100,1)
Infotainment System
Voice Tag Commands
OnStar (if equipped) Command
Voice Tags are recorded phrases
that can be stored in the navigation
system. These voice tags are
associated with Address Book
Entries, and once these voice
tags are stored, they can be used
as part of a voice recognition
command that sets the particular
address book entry as a destination.
See the Address Book and Voice
tag sections earlier in this manual
for information about instructions
on how to store a voice tag in the
system.
Hands Free: This command
instructs the system to connect to
OnStar. Enter the OnStar voice
recognition system. See the OnStar
owner guide for more information.
Navigation [go to] (voice tag):
This command allows selection of a
destination saved under the stored
voice tag. The system plays back
the voice tag and asks to confirm
by saying yes or no.
If a destination is set to “Home”,
say “Navigation go to Home”. After
the system plays back the voice tag
and it is confirmed, the system sets
“Home” as the destination.
Help Commands
Help
Radio [help]
CD help, DVD help, Disc help
Display [help]
Navigation [help]
Display Commands
Display [set/select] day [mode]
Display [set/select] night [mode]
Display [set/select] auto [mode]
Radio Commands
[radio/radio band] AM
[radio/radio band] FM
[radio/radio band] XM
Radio select <frequency> AM
Radio select <frequency> FM
Radio select <frequency> XM
CD/DVD/Disc Commands
Radio [CD/DVD/Disc]
Radio [CD/DVD/Disc] select
<track number>
General Navigation Commands
Feedback On
Feedback Off
Navigation voice [guidance] on
Navigation voice [guidance] off
[cancel/goodbye/quit]
Point of Interest (POI) Commands
Navigation show [GAS/gas
station/gas stations]
Navigation show [DINING/
restaurant/restaurants]
Navigation show [ATM/ATMs]
Navigation show [hotel/hotels]
Navigation show
[airport/airports]
Navigation show [shop/shops]
Navigation hide [GAS/gas
station/gas stations]
Navigation hide [DINING/
restaurant/restaurants]
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (101,1)
Infotainment System
Navigation
Navigation
Navigation
Navigation
hide
hide
hide
hide
[ATM/ATMs]
[hotel/hotels]
[airport/airports]
[shop/shops]
Destination and Guidance
Commands
Navigation [go to] preset
destination [number] one
Navigation [go to] preset
destination [number] two
Navigation [go to] preset
destination [number] three
Navigation [go to] preset
destination [number] four
Navigation [go to] preset
destination [number] five
Navigation [go to] preset
destination [number] six
Navigation delete [destination/
route/next waypoint]
Route (used in conjunction with
another command)
Next waypoint (used in
conjunction with another
command)
Add to waypoint (used in
conjunction with another
command)
Replace destination (used in
conjunction with another
command)
Yes (used in conjunction with
another command)
No (used in conjunction with
another command)
Destination (used for
Destination VR entry, available
in English language only)
Voice Tag Commands
Navigation [go to] <Voice Tag>
101
Phone
Bluetooth
For vehicles equipped with
Bluetooth capability, the system
can interact with many cell phones,
allowing:
.
Placement and receipt of calls in
a hands-free mode.
.
Sharing of the cell phone’s
address book or contact list
with the vehicle.
To minimize driver distraction,
before driving, and with the vehicle
parked:
.
Become familiar with the
features of the cell phone.
Organize the phone book and
contact lists clearly and delete
duplicate or rarely used entries.
If possible, program speed dial
or other shortcuts.
.
Review the controls and
operation of the infotainment
and navigation system.
OnStar Command (if equipped)
Hands Free
Chevrolet Equinox and GMC Terrain Navigation System - 2011
102
Infotainment System
Pair cell phone(s) to the vehicle.
The system may not work with
all cell phones. See “Pairing a
Phone” in this section for more
information.
To use voice recognition, press
the b / g button located on the
steering wheel.
.
If the cell phone has voice
dialing capability, learn to
use that feature to access the
address book or contact list.
See “Voice Pass-Thru” in this
section for more information.
The system responds with a tone.
After the tone say “Hands Free” to
use the bluetooth voice recognition
system. The system then responds
with “Ready,” followed by a tone.
After the tone, say a command.
.
See “Storing and Deleting Phone
Numbers” in this section for
more information.
For additional information say
“Help” while you are in a voice
recognition menu.
.
Black plate (102,1)
{ WARNING
When using a cell phone, it can
be distracting to look too long
or too often at the screen of
the phone or the infotainment
(navigation) system. Taking
your eyes off the road too long
or too often could cause a crash
resulting in injury or death. Focus
your attention on driving.
Using Voice Recognition
Pairing a Phone
1. Press b / g. Say “Hands Free”
after the tone.
2. Say “Bluetooth.”
3. Say “Pair.” The system responds
with instructions and a four‐digit
Personal Identification Number
(PIN). The PIN is used in Step 5.
4. Start the pairing process on the
cell phone that you want to pair.
For help with this process, see
your cell phone manufacturers
user guide.
5. Locate the device named “Your
Vehicle” in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN that was provided in Step 3.
After the PIN is successfully
entered, the system prompts you
to provide a name for the paired
cell phone. This name will be
used to indicate which phones
are paired and connected to the
vehicle, see “Listing All Paired
and Connected Phones” after for
more information.
6. Repeat Steps 1 through 5 to pair
additional phones.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (103,1)
Infotainment System
Listing All Paired and Connected
Phones
3. Say “Delete.” The system asks
for which phone to delete.
The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds with “is connected”
after that phone name.
4. Say the name of the phone you
want to delete.
1. Press b / g. Say “Hands Free”
after the tone.
2. Say “Bluetooth.”
3. Say “List.”
Deleting a Paired Phone
If the phone name you want to
delete is unknown, see “Listing All
Paired and Connected Phones”
earlier in this section.
1. Press b / g. Say “Hands Free”
after the tone.
2. Say “Bluetooth.”
Connecting to a Different Phone
To connect to a different cell phone,
the bluetooth system looks for the
next available cell phone in the
order in which all the available cell
phones were paired. Depending
on which cell phone you want to
connect to, you may have to use
this command several times.
1. Press b / g. Say “Hands Free”
after the tone.
2. Say “Bluetooth.”
103
3. Say “Change phone.”
.
If another cell phone is
found, the response will be
“<Phone name> is now
connected.”
.
If another cell phone is not
found, the original phone
remains connected.
Storing and Deleting Phone
Numbers
The system can store up to
30 phone numbers as name tags
in the Hands-Free Directory that is
shared between the Bluetooth and
OnStar systems.
The following commands are used
delete and store phone numbers.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
104
Black plate (104,1)
Infotainment System
Command
Usage
Store
This command will store a phone number,
or a group of numbers as a name tag.
Digit Store
This command allows a phone number to
be stored as a name tag by entering the
digits one at a time.
Delete
This command is used to delete individual
name tags.
Delete All Name Tags
This command deletes all stored name tags
in the Hands Free Calling Directory and the
OnStar Turn by Turn Destinations Directory.
Using the “Store” Command
Using the “Digit Store” Command
1. Press b / g. Say “Hands Free”
after the tone.
If an unwanted number is
recognized by the system, say
“Clear” at any time to clear the
last number.
2. Say “Store.”
3. Say the phone number or group
of numbers you want to store
all at once with no pauses, then
follow the directions given by the
system to save a name tag for
this number.
To hear all of the numbers
recognized by the system, say
“Verify” at any time.
1. Press b / g. Say “Hands Free”
after the tone.
2. Say “Digit Store.”
3. Say each digit, one at a time,
that you want to store. After
each digit is entered, the system
repeats back the digit it heard
followed by a tone. After the
last digit has been entered,
say “Store,” and then follow the
directions given by the system to
save a name tag for this number.
Using the “Delete” Command
1. Press b / g. Say “Hands Free”
after the tone.
2. Say “Delete.”
3. Say the name tag you want to
delete.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (105,1)
Infotainment System
Using the “Delete All Name Tags”
Command
This command deletes all stored
name tags in the Hands-Free
Calling Directory and the OnStar
Turn-by-Turn Destinations Directory.
Making a Call
Calls can be made using the following commands.
Command
2. Say “Delete all name tags”.
Listing Stored Numbers
The list command will list all the
stored numbers and name tags.
Usage
Dial or Call
The dial or call command can be used
interchangeably to dial a phone number or
a stored name tag.
Digit Dial
This command allows a phone number to
be dialed by entering the digits one at
a time.
Re‐dial
This command is used to dial the last
number used on the cell phone.
To delete all name tags:
1. Press b / g. Say “Hands Free”
after the tone.
Using the “List” Command
Using the “Dial” or “Call”
Command
1. Press b / g. Say “Hands Free”
after the tone.
1. Press b / g. Say “Hands Free”
after the tone.
2. Say “Directory.”
2. Say “Dial” or “Call.”
3. Say “Hands Free Calling.”
3. Say the entire number without
pausing or say the name tag.
4. Say “List.”
105
Once connected, the person called
will be heard through the audio
speakers.
Using the “Digit Dial” Command
The digit dial command allows a
phone number to be dialed by
entering the digits one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone.
If an unwanted number is
recognized by the system, say
“Clear” at any time to clear the
last number.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
106
Black plate (106,1)
Infotainment System
To hear all of the numbers
recognized by the system,
say “Verify” at any time.
1. Press b / g. Say “Hands Free”
after the tone.
2. Say “Digit Dial.”
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the
last digit has been entered,
say “Dial.”
Receiving a Call
Three‐Way Calling
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
Three‐way calling must be
supported on the cell phone
and enabled by the wireless
service carrier.
.
.
b / g to answer the call.
Press $ / c to ignore a call.
Press
Call Waiting
Call waiting must be supported on
the cell phone and enabled by the
wireless service carrier.
.
Once connected, the person called
will be heard through the audio
speakers.
Press b / g to answer an
incoming call when another
call is active. The original
call is placed on hold.
Using the “Re‐dial” Command
.
1. Press b / g. Say “Hands Free”
after the tone.
Press b / g again to return to
the original call.
.
To ignore the incoming call,
no action is required.
.
Press $ / c to disconnect the
current call and switch to the call
on hold.
2. After the tone, say “Re‐dial.”
Once connected, the person called
will be heard through the audio
speakers.
1. While on a call, press
b / g.
2. Say “Three‐way call.”
3. Use the dial or call command to
dial the number of the third party
to be called.
4. Once the call is connected,
press b / g to link all the callers
together.
Ending a Call
Press
$ / c to end a call.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (107,1)
Infotainment System
Muting a Call
During a call, all sounds from inside
the vehicle can be muted so that the
person on the other end of the call
cannot hear them.
To mute a call, press b /
then say “Mute Call.”
g, and
To Transfer Audio From the
Bluetooth System to a Cell Phone
During a call with the audio in the
vehicle:
1. Press
b / g.
2. Say “Transfer Call.”
g, and
To Transfer Audio to the Bluetooth
System From a Cell Phone
Audio can be transferred between
the Bluetooth system and the cell
phone.
During a call with the audio on the
cell phone, press b / g. The audio
transfers to the vehicle. If the audio
does not transfer to the vehicle, use
the audio transfer feature on the
cell phone. See your cell phone
manufacturers user guide for more
information.
To cancel mute, press b /
then say “Un‐mute Call.”
Transferring a Call
The cell phone must be paired
and connected with the Bluetooth
system before a call can be
transferred. The connection process
can take up to two minutes after
the ignition is turned to ON/RUN.
107
Voice Pass-Thru
Voice pass‐thru allows access to
the voice recognition commands on
the cell phone. See your cell phone
manufacturers user guide to see if
the cell phone supports this feature.
To access contacts stored in the cell
phone:
1. Press b / g. Say “Hands Free”
after the tone.
2. Say “Bluetooth”. The system
responds “Bluetooth ready”,
followed by a tone.
3. Say “Voice”. The system
responds “OK, accessing
<phone name>”.
.
The cell phone's normal
prompt messages will go
through its cycle according
to the phone's operating
instructions.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
108
Black plate (108,1)
Infotainment System
Dual Tone Multi-Frequency
(DTMF) Tones
The Bluetooth system can send
numbers and the numbers stored
as name tags during a call. You
can use this feature when calling a
menu driven phone system. Account
numbers can also be stored for use.
Sending a Number or Name Tag
During a Call
1. Press b / g. The system
responds “Ready,” followed by
a tone.
2. Say “Dial.”
3. Say the number or name tag
to send.
Clearing the System
Unless information is deleted out
of the in‐vehicle Bluetooth system,
it will be retained indefinitely.
This includes all saved name tags
in the phone book and phone
pairing information. For information
on how to delete this information,
see the previous sections on
Deleting a Paired Phone and
Deleting Name Tags.
Pairing a Phone Using the
Infotainment System
The pairing process can be started
by using the controls on the
infotainment system.
1. Press the CONFIG button. Turn
the MENU/SEL knob until the
Phone menu displays. Press the
MENU/SEL knob or press the
Phone screen button to display
other options.
2. Turn the MENU/SEL knob until
Bluetooth displays. Press the
MENU/SEL knob or press the
Bluetooth screen button to
display other options.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (109,1)
Infotainment System
109
4. The system voice prompt
requests that you say the name
you want used for the phone
that is being paired. Use a name
that best describes the phone.
The system voice prompt then
repeats the name you provided
for confirmation: say “Yes.”
5. The system responds with
“phone name has been
successfully paired” after the
pairing process is complete.
3.
Select “Add New Phone.”
Start the pairing process on
the cell phone that you want
to pair. See the cell phone
manufacturer's user guide for
information on this process.
On the cell phone, locate the
device named “Your Vehicle.”
Follow the instructions given
on the cell phone to enter the
four-digit Personal Identification
Number (PIN) that has been
provided.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
110
Black plate (110,1)
Infotainment System
Listing All Paired and Connected
Phones
1. Press the CONFIG button.
Turn the MENU/SEL knob
until the Phone menu displays.
Press the MENU/SEL knob or
press the Phone screen button
to display other options.
3. Turn the MENU/SEL knob until
Device List displays. Press the
MENU/SEL knob or press the
Device List screen button to
display other options.
2. Turn the MENU/SEL knob until
Bluetooth displays. Press the
MENU/SEL knob or press the
Bluetooth screen button to
display other options.
A list of all currently paired
phones will be displayed. If there
is a currently connected phone,
a checkmark will appear on the
right side of the phone name.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (111,1)
Infotainment System
111
Deleting a Paired Phone
1. Press the CONFIG button.
Turn the MENU/SEL knob
until the Phone menu displays.
Press the MENU/SEL knob or
press the Phone screen button
to display other options.
3. Turn the MENU/SEL knob until
Device List displays. Press the
MENU/SEL knob or press the
Device List screen button to
display other options.
2. Turn the MENU/SEL knob until
Bluetooth displays. Press the
MENU/SEL knob or press the
Bluetooth screen button to
display other options.
4. Turn the MENU/SEL knob, then
press it to select the phone to be
deleted. Follow the on-screen
prompts to delete the device
from the system.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
112
Black plate (112,1)
Infotainment System
Connecting to a Different Phone
To link to a different phone, the
new phone must be in the vehicle
and available to be connected to
the Bluetooth system before the
process is started.
5. Once a phone has been deleted,
the only way to connect back to
that phone is to pair the phone
again.
1. Press the CONFIG button.
Turn the MENU/SEL knob
until the Phone menu displays.
Press the MENU/SEL knob or
press the Phone screen button
to display other options.
2. Turn the MENU/SEL knob until
Bluetooth displays. Press the
MENU/SEL knob or press the
Bluetooth screen button to
display other options.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (113,1)
Infotainment System
3. Turn the MENU/SEL knob until
Device List displays. Press the
MENU/SEL knob or press the
Device List screen button to
display other options.
4. Select the phone to be linked
and then follow the on-screen
prompts.
5. The Phone menu will be
displayed with the name of
the phone linked.
113
Chevrolet Equinox and GMC Terrain Navigation System - 2011
114
Black plate (114,1)
Infotainment System
Making a Call
Enter Number
Phone Book
Press 5 / 0 located on the
faceplate of the infotainment
system, to access the phone menu.
Use this option to enter a phone
number and make a call. To do this:
The Phone Book feature is only
supported if that feature is available
on the Bluetooth phone. See your
cell phone manufacturer's user
guide for more information.
1. Turn the MENU/SEL knob, then
press it to select Enter Number
selection. A dial pad displays.
The phone book can be accessed
by pressing the Phone Book
selection on the Phone Menu
screen.
2. Enter the phone number by
pressing the numbers on the
keypad.
3. Press the Call button on the
screen to make the call.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (115,1)
Infotainment System
Turn the MENU/SEL knob to select
the person or place to call. Press
the MENU/SEL knob or press the
desired person or place to display
the number. Press the MENU/SEL
knob or press the number to make
the call.
The Phone Book feature also has a
search menu that can be accessed
by pressing that option screen
button. Once the Search menu
displays, turn the MENU/SEL knob
to scroll through the list of saved
persons or places. These lists are
saved in alphabetical order. Press
the MENU/SEL knob or press the
appropriate search line to obtain
the numbers in the list that has
been saved.
115
Chevrolet Equinox and GMC Terrain Navigation System - 2011
116
Black plate (116,1)
Infotainment System
Call Lists
The Call Lists selection from the
Phone Menu screen can be used
to show a list of incoming calls,
outgoing calls, and missed calls.
1. Press the CONFIG button. Turn
the MENU/SEL knob until Phone
displays. Press the MENU/SEL
knob or press the Phone screen
button to display other options.
2. Turn the MENU/SEL knob,
then press this knob or press on
either Incoming Calls, Outgoing
Calls, or Missed Calls.
Once one of these options have
been selected, a pop-up menu
displays. A list of persons and
places will display for the selected
option.
Turn the MENU/SEL knob,
then press this knob or press
the appropriate screen button
to select someone on that list.
A menu displays showing the
phone number for that person.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (117,1)
Infotainment System
Accepting or Declining an
Incoming Call
When an incoming call is received,
the audio is muted and ring tone
sounds.
Call Waiting
Conference Calling
Call waiting must be supported on
the Bluetooth phone and enabled by
the wireless service carrier to work.
Conference and three-way calling
must be supported on the Bluetooth
phone and enabled by the wireless
service carrier to work.
Accepting a Call
Switching Calls (Only Available
with Call Waiting)
Press the appropriate screen button
for the Answer option on the screen
to answer the call.
This feature allows you to switch
between calls, making one call
active and placing the other on hold.
Declining a Call
Switch Call: Turn or press the
MENU/SEL control knob to “Switch
Call” and press Enter or press the
“Switch Call” option.
Select the Decline option on the
screen.
117
To start a conference while in a
current call:
1. Press the 5 / 0 button on the
faceplate until the Phone main
screen is shown with the current
active call.
2. Select the Enter Number option
on the screen.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
118
Black plate (118,1)
Infotainment System
Ending a Call
Dual Tone Multi-Frequency
(DTMF) Tones
The in-vehicle Bluetooth system can
send numbers during a call. This is
used when calling a menu-driven
phone system.
1. Press the
3. Make another call. The first
call will be placed on hold while
the second call is dialing and
connected.
4. To make a conference call,
select the Merge Calls option
which will merge both calls into
one conference call.
5. To add more callers to the
conference call, repeat Steps 2
through 4. The number of callers
who can be added is limited by
your wireless service carrier.
5 / 0 button.
To end a call:
1. Press the
5 / 0 button.
2. Select Hang Up.
Mute or UnMute a Call
1. Press the
5 / 0 button.
2. Select the Mute call.
3. Select the Mute call again to
unmute the call.
2. Turn the MENU/SEL knob, then
press this knob or press the
Enter Number option and enter
the number sequence.
The DTMF Tones will be generated
on the network as you enter each
number.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (119,1)
Infotainment System
119
Trademarks and
License Agreements
Manufactured under license
under U.S. Patent #'s: 5,451,942;
5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and
worldwide patents issued &
pending. DTS and the Symbol
are registered trademarks and
DTS Digital Surround and the DTS
logos are trademarks of DTS Inc.
All Rights Reserved.
Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.
DivX®, DivX Certified® and
associated logos are registered
trademarks of DivX, Inc. and are
used under license.
About DivX video: DivX® is a digital
video format created by DivX, Inc.
This is an official DivX Certified
device that plays DivX video. Visit
www.divx.com for more information
and software tools to convert your
files into DivX video.
MP3PRO audio decoding
technology licensed from Coding
Technologies, Fraunhofer IIS and
Thompson.
About DivX Video-On-Demand: This
DivX Certified® device must be
registered in order to play DivX
Video-On-Demand (VOD) content.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
120
Black plate (120,1)
Infotainment System
name. Channel blocking is available
for XM Satellite Radio receivers by
notifying XM at:
To generate the registration code,
locate the DivX VOD section
in the device setup menu. Go to
www.vod.divx.com with this code to
complete the registration process
and learn more about DivX VOD.
“Made for iPod” means that an
electronic accessory has been
designed to connect specifically
to iPod and has been certified
by the developer to meet Apple
performance standards. Apple is
not responsible for the operation of
this device or its compliance with
safety and regulatory standards.
iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple
Inc., registered in the U.S. and other
countries.
Fees and Taxes — Subscription
fee, taxes, one time activation
fee, and other fees may apply.
Subscription fee is consumer only.
All fees and programming subject
to change. Subscriptions subject to
Customer Agreement available at
www.xmradio.com. XM™ service
only available in the 48 contiguous
United States and Canada*.
*Canada — Some deterioration
of service may occur in extreme
northern latitudes. This is
beyond the control of XM™
Satellite Radio. Explicit Language
Notice — Channels with frequent
explicit language are indicated with
an “XL” preceding the channel
.
USA Customers — Visit
www.xmradio.com
or call 1-800-xmradio
(1-800-967-2346).
.
Canadian Customers — Visit
www.xmradio.ca or call
1-877-438-9677.
It is prohibited to copy, decompile,
disassemble, reverse engineer,
hack, manipulate, or otherwise
make available any technology or
software incorporated in receivers
compatible with the XM™ Satellite
Radio System or that support the
XM website, the Online Service or
any of its content. Furthermore, the
AMBER voice compression software
included in this product is protected
by intellectual property rights
including patent rights, copyrights,
and trade secrets of Digital Voice
Systems, Inc.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (121,1)
Infotainment System
General Requirements:
1.
A License Agreement from
XM™ is required for any product
that incorporates XM Technology
and/or for use of any of the
XM marks to be manufactured,
distributed or marketed in the
XM Service Area.
2. For products to be distributed,
marketed and/or sold in
Canada, a separate agreement
is required with Canadian
Satellite Radio Inc. (operating
as XM Canada).
This product incorporates copyright
protection technology that is
protected by U.S. patents and other
intellectual property rights of Rovi
Corporation. Reverse engineering
or disassembly is prohibited.
This product uses the source
code of T-Kernel under T-License
granted by the T-Engine Forum
(www.t-engine.org).
Music and video recognition
technology and related data
are provided by Gracenote®.
Gracenote is the industry standard
in music recognition technology
and related content delivery.
For more information, visit
www.gracenote.com.
121
CD, DVD, Blu-ray Disc, and
music and video-related data from
Gracenote, Inc., copyright © 2000
to present Gracenote. One or
more patents owned by Gracenote
apply to this product and service.
See the Gracenote website for a
non-exhaustive list of applicable
Gracenote patents. Gracenote and
CDDB, MusicID, Media VOCS, the
Gracenote logo and logotype, and
the “Powered by Gracenote” logo
are either registered trademarks
or trademarks of Gracenote in
the United States and/or other
countries.
If you require more information
regarding the use of the Gracenote
Service, visit: www.gracenote.com/
corporate.
For the data provided by
Gracenote® Music Recognition
Service, the content is not
necessarily guaranteed 100%.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
122
Black plate (122,1)
Infotainment System
Regarding the use of Gracenote
Music Recognition Service, when
this product is used, it is necessary
to agree to the following articles.
You agree not to assign, copy,
transfer or transmit the Gracenote
Software or any Gracenote Data to
any third party.
Gracenote® End User License
YOU AGREE NOT TO USE OR
EXPLOIT GRACENOTE DATA,
THE GRACENOTE SOFTWARE,
OR GRACENOTE SERVERS,
EXCEPT AS EXPRESSLY
PERMITTED HEREIN. You agree
that your non-exclusive license
to use the Gracenote Data, the
Gracenote Software, and Gracenote
Servers will terminate if you violate
these restrictions. If your license
terminates, you agree to cease
any and all use of the Gracenote
Data, the Gracenote Software,
and Gracenote Servers.
This application or device contains
software from Gracenote, Inc. of
Emeryville, California (“Gracenote”).
The software from Gracenote
(the “Gracenote Software”) enables
this application to perform disc
and/or file identification and obtain
music-related information, including
name, artist, track, and title
information (“Gracenote Data”)
from online servers or embedded
databases (collectively, “Gracenote
Servers”) and to perform other
functions. You may use Gracenote
Data only by means of the intended
End-User functions of this
application or device. You agree
that you will use Gracenote Data,
the Gracenote Software, and
Gracenote Servers for your own
personal non-commercial use only.
Gracenote reserves all rights in
Gracenote Data, the Gracenote
Software, and the Gracenote
Servers, including all ownership
rights.
Under no circumstances will
Gracenote become liable for any
payment to you for any information
that you provide. You agree that
Gracenote, Inc. may enforce its
rights under this Agreement against
you directly in its own name.
The Gracenote service uses a
unique identifier to track queries
for statistical purposes.
The purpose of a randomly
assigned numeric identifier is to
allow the Gracenote service to
count queries without knowing
anything about who you are.
For more information, see the web
page for the Gracenote Privacy
Policy for the Gracenote service.
The Gracenote Software and each
item of Gracenote Data are licensed
to you “AS IS.” Gracenote makes
no representations or warranties,
express or implied, regarding the
accuracy of any Gracenote Data
from in the Gracenote Servers.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (123,1)
Infotainment System
Gracenote reserves the right to
delete data from the Gracenote
Servers or to change data
categories for any cause that
Gracenote deems sufficient.
No warranty is made that the
Gracenote Software or Gracenote
Servers are error-free or that
functioning of Gracenote Software
or Gracenote Servers will be
uninterrupted.
Gracenote is not obligated to
provide you with new enhanced or
additional data types or categories
that Gracenote may provide in the
future and is free to discontinue its
services at any time.
Gracenote disclaims all warranties
express or implied, including, but
not limited to, implied warranties
of merchantability, fitness for a
particular purpose, title, and
non-infringement. Gracenote
does not warrant the results
that will be obtained by your use
of the gracenote software or any
gracenote server. In no case
will gracenote be liable for any
consequential or incidental
damages or for any lost profits
or lost revenues.
123
Map End User License Agreement
© 2010 Tele Atlas North America,
Inc. All rights reserved.
This material is proprietary and the
subject of copyright protection and
other intellectual property rights
owned by or licensed to Tele Atlas
North America, Inc.
The use of this material is subject to
the terms of a license agreement.
You will be held liable for any
unauthorized copying or disclosure
of this material.
Data by infoUSA Copyright © 2010,
All Rights Reserved.
© 2010 VISA Corporation
© CoStar Realty Information, Inc.
The Bullseye Design is a registered
trademark of Target Brands, Inc.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
124
Black plate (124,1)
Infotainment System
END USER LICENSE
AGREEMENT
PLEASE READ THIS AGREEMENT
CAREFULLY BEFORE USING THE
NAVIGATION SYSTEM THIS IS
A LICENSE AGREEMENT FOR
YOUR COPY OF THE SPATIAL
MAP DATABASE, INCLUDING
LOCATION CODES AND RELATED
PRODUCTS (COLLECTIVELY,
THE "DATABASE"), USED IN THE
NAVIGATION SYSTEM. BY USING
THE NAVIGATION SYSTEM AND
THE DATABASE, YOU ACCEPT
AND AGREE TO BE BOUND BY
ALL TERMS AND CONDITIONS
SET FORTH BELOW.
LICENSE GRANT
DENSO CORPORATION
(“DENSO”), as a licensed distributor
of the DATABASE, grants to you
a non-exclusive, non-perpetual
license to use your copy of the
DATABASE for your personal use
or for your use in your business'
internal operations and not for any
other purpose. This license does
not include the right to grant
sub-licenses.
OWNERSHIP
The DATABASE and the copyrights
and intellectual property and
neighboring rights therein are
owned by Tele Atlas North America,
Inc. (“TANA”) and its licensors. This
Agreement does not transfer any
title or interest in the DATABASE,
except for the license to use the
DATABASE according and subject
to the terms and conditions of this
Agreement. You shall not alter,
obscure or remove any copyright
notices, trademark notices or other
restrictive legends relating to the
DATABASE.
The DATABASE comprises
confidential and proprietary
information and materials of TANA.
Accordingly, you shall hold the
DATABASE in confidence and
trust. You shall take reasonable
steps to protect the DATABASE
from misappropriation or misuse.
You shall not extract stand-alone
data from or publish any part of the
DATABASE without the prior written
consent of TANA and its licensors.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (125,1)
Infotainment System
LIMITATIONS ON USE
DISCLAIMER OF WARRANTY
The DATABASE is restricted for use
in the specific system for which it
was created. Except to the extent
explicitly permitted by mandatory
laws, you may not extract or
reutilize any portion of the contents
of the DATABASE, nor reproduce,
copy, duplicate, modify, adapt,
translate, disassemble, decompile,
or reverse engineer any portion of
the DATABASE.
THE DATABASE IS PROVIDED
ON AN “AS IS” AND “WITH ALL
FAULTS BASIS” AND DENSO
AND TANA (AND THEIR
LICENSORS AND SUPPLIERS)
EXPRESSLY DISCLAIM ALL
OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING
BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES
OF NON-INFRINGEMENT,
MERCHANTABILITY,
SATISFACTORY QUALITY,
ACCURACY, TITLE AND FITNESS
FOR A PARTICULAR PURPOSE.
TRANSFER
You many not transfer the
DATABASE to third parties,
except together with the system for
which it was created, provided that
you do not retain any copy of the
DATABASE, and provided that the
transferee agrees to all terms and
conditions of this AGREEMENT.
125
NO ORAL OR WRITTEN ADVICE
OR INFORMATION PROVIDED BY
DENSO OR TANA (OR ANY OF
THEIR LICENSORS, AGENTS,
EMPLOYEES OR THIRD PARTY
PROVIDERS) SHALL CREATE A
WARRANTY, AND YOU ARE NOT
ENTITLED TO RELY ON ANY
SUCH ADVICE OR INFORMATION.
THIS DISCLAIMER OF
WARRANTIES IS AN ESSENTIAL
CONDITION OF THIS
AGREEMENT.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
126
Black plate (126,1)
Infotainment System
LIMITATION OF LIABILITY
WARNINGS
U.S. GOVERNMENT RIGHTS
IN NO EVENT SHALL DENSO OR
TANA (OR THEIR LICENSORS
OR SUPPLIERS) BE LIABLE
FOR ANY INCIDENTAL,
CONSEQUENTIAL, SPECIAL,
INDIRECT OR EXEMPLARY
DAMAGES ARISING OUT OF THIS
AGREEMENT OR YOUR USE OF
THE DATABASE, INCLUDING,
WITHOUT LIMITATION, LOST
PROFITS OR COSTS OF COVER,
LOSS OF USE OR BUSINESS
INTERRUPTION OR THE LIKE,
REGARDLESS OF WHETHER
THE PARTY WAS ADVISED OF
THE POSSIBILITY OF SUCH
DAMAGES.
The DATABASE comprises facts
and information from government
and other sources reflecting
circumstances in existence before
you received the DATABASE, which
may contain errors and omissions.
Accordingly, the DATABASE may
contain inaccurate or incomplete
information due to the passage of
time, changing circumstances, and
due to the nature of the sources
used. The DATABASE does not
include or reflect information
relating to, among other things,
neighborhood safety; law
enforcement; emergency
assistance; construction work; road
or lane closures; vehicle or speed
restrictions; road slope or grade;
bridge height, weight or other limits;
road or traffic conditions; special
events; traffic congestion; or
travel time.
If you are an agency, department,
or other entity of the United States
Government, or funded in whole
or in part by the United States
Government, then use, duplication,
reproduction, release, modification,
disclosure or transfer of this
commercial product and
accompanying documentation,
is restricted in accordance with
the LIMITED or RESTRICTED
rights as described in DFARS
252.227-7014(a)(1) (JUN 1995)
(DOD commercial computer
software definition), DFARS
227.7202-1 (DOD policy on
commercial computer software),
FAR 52.227-19 (JUN 1987)
(commercial computer software
clause for civilian agencies),
DFARS 252.227-7015 (NOV 1995)
(DOD technical data – commercial
items clause); FAR 52.227-14
Alternates I, II, and III (JUN 1987)
(civilian agency technical data and
noncommercial computer software
clause); and/or FAR 12.211 and
IN NO EVENT WILL THE TOTAL
LIABILITY OF DENSO OR TANA
(OR THEIR LICENSORS OR
SUPPLIERS) EXCEED THE
AMOUNTS PAID BY YOU
FOR THE DATABASE.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (127,1)
Infotainment System
FAR 12.212 (commercial item
acquisitions), as applicable. In case
of conflict between any of the FAR
and DFARS provisions listed
herein and this Agreement, the
construction that provides greater
limitations on the Government’s
rights shall control. Contractor/
manufacturer is Tele Atlas North
America, Inc., 11 Lafayette Street,
Lebanon, NH 03766-1445. Phone:
603.643. 0330. The DATABASE
is ©1984-2010 by Tele Atlas
North America, Inc. ALL RIGHTS
RESERVED. For purpose of any
public disclosure provision under
any federal, state or local law, it
is agreed that the DATABASE is
a trade secret and a proprietary
commercial product and not subject
to disclosure.
If you are an agency, department,
or other entity of any State
government, the United States
Government or any other public
entity or funded in whole or in part
by the United States Government,
then you hereby agree to protect the
DATABASE from public disclosure
and to consider the DATABASE
exempt from any statute, law,
regulation, or code, including any
Sunshine Act, Public Records
Act, Freedom of Information Act,
or equivalent, which permits public
access and/or reproduction or use
of the Licensed Products. In the
event that such exemption is
challenged under any such laws,
this Agreement shall be considered
breached and any and all right to
retain any copies or to use of the
DATABASE shall be terminated and
considered immediately null and
void. Any copies of the DATABASE
held by you shall immediately be
destroyed. If any court of competent
jurisdiction considers this clause
void and unenforceable, in whole
or in part, for any reason, this
Agreement shall be considered
terminated and null and void, in its
entirety, and any and all copies of
the DATABASE shall immediately
be destroyed.
BTV.461060.2
127
END USER NOTICE
PLEASE READ THIS NOTICE
CAREFULLY BEFORE USING
THIS NAVIGATION SYSTEM
The Point Of Interest Data (“POI”
Data) in the navigation system
is in part provided by infoUSA Inc.
(“infoUSA”). By using the POI Data,
you accept and agree to all terms
and conditions set forth below.
1. Ownership
All rights, title and interest to
the infoUSA POI Data shall be
retained by infoUSA.
2. Limitations on Use
Except to the extent explicitly
permitted by mandatory laws,
you may not extract or re-utilize
any portion of the contents of
the POI Data, nor reproduce,
copy, modify, adapt, translate,
disassemble, decompile,
or reverse engineer any portion
of the POI Data.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
128
Black plate (128,1)
Infotainment System
3. Transfer
You may not transfer the POI
Data to third parties, except
together with the system for
which it was created, provided
that you do not retain any copy
of the POI Data.
4. Disclaimer of Warranty
EXCEPT AS STATED
HEREIN, INFOUSA MAKES
NO EXPRESS OR IMPLIED
WARRANTIES, INCLUDING,
WITHOUT LIMITATION, ANY
EXPRESS OR IMPLIED
WARRANTY OF FITNESS FOR
A PARTICULAR PURPOSE
OR WARRANTY OF
MERCHANTABILITY.
5. Limitation of Liability
EITHER INFOUSA OR
SUPPLIER OF POI DATA
SHALL NOT BE LIABLE
FOR ANY INDIRECT,
CONSEQUENTIAL OR
INCIDENTAL DAMAGES
MADE OR ALLEGED IN
CONNECTION WITH YOUR
USE OF THE POI DATA.
END USER LICENSE AGREEMENT
Personal Use Only — You agree
to use this information for solely
personal, non commercial purposes,
and not for service bureau, time
sharing or other similar purposes.
You may not modify the information
or remove any copyright notices
that appear on the information in
any way. You may not decompile,
disassemble or reverse engineer
any portion of this information,
and may not transfer or distribute
it in any form, for any purpose.
Without limiting the foregoing,
you may not use this information
with any products, systems,
or applications installed or otherwise
connected to or in communication
with vehicles, capable of vehicle
navigation, positioning, dispatch,
real time route guidance, fleet
management or similar applications.
No Warranty — This information is
provided to you “as is,” and you
agree to use it at your own risk.
DENSO and its licensors (and their
licensors and suppliers, collectively
“DENSO”) make no guarantees,
representations or warranties of any
kind, express or implied, arising by
law or otherwise, including but not
limited to, and DENSO expressly
disclaims any warranties regarding
content, quality, accuracy,
completeness, effectiveness,
reliability, fitness for a particular
purpose, non infringement,
usefulness, use or results to be
obtained from this information,
or that the information or server
will be uninterrupted or error free.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (129,1)
Infotainment System
Some states, territories and
countries do not allow certain
warranty exclusions, so to that
extent, the above exclusion may
not apply to you.
Disclaimer of Liability: DENSO
SHALL NOT BE LIABLE TO YOU
FOR ANY CLAIM, DEMAND OR
ACTION, IRRESPECTIVE OF
ITS NATURE, ALLEGING ANY
LOSS, INJURY OR DAMAGES,
WHETHER DIRECT, INDIRECT,
INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES,
INCLUDING ANY LOSS OF
PROFIT, REVENUE OR
CONTRACTS ARISING OUT
OF YOUR POSSESSION, USE
OF OR INABILITY TO USE THIS
INFORMATION, ANY DEFECT
IN THE INFORMATION, OR THE
BREACH OF THESE TERMS OR
CONDITIONS, WHETHER IN AN
ACTION IN CONTRACT OR TORT
OR BASED ON A WARRANTY,
EVEN IF DENSO OR ITS
LICENSORS HAVE BEEN
ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. Some states,
territories and countries do not
allow certain liability exclusions or
damages limitations, so to that
extent the above may not apply
to you.
Indemnity — You agree to
indemnify, defend and hold DENSO
and its licensors (including their
respective licensors, suppliers,
assignees, subsidiaries, affiliated
companies, and the respective
officers, directors, employees,
shareholders, agents and
representatives of each of them)
129
free and harmless from and against
any liability, loss, injury (including
injuries resulting in death), demand,
action, cost, expense, or claim of
any kind or character, including but
not limited to attorney’s fees, arising
out of or in connection with any use
or possession by you of this
information.
END USER NOTICE
The marks of companies displayed
by this product to indicate business
locations are the marks of their
respective owners. The use of
such marks in this product does not
imply any sponsorship, approval,
or endorsement by such companies
of this product.
Chevrolet Equinox and GMC Terrain Navigation System - 2011
130
Black plate (130,1)
Infotainment System
2 NOTES
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (1,1)
INDEX
i-1
A
C
D
Accepting or Declining an
Incoming Call . . . . . . . . . . . . . . . . . 117
Address Book . . . . . . . . . . . . . . . . . . . 69
Alpha-Numeric Keyboard . . . . . . . . 54
AM-FM Radio . . . . . . . . . . . . . . . . . . . . 12
Audio Book . . . . . . . . . . . . . . . . . . . . . . 38
Audio Output . . . . . . . . . . . . . . . . . . . . 47
Audio Players
CD/DVD . . . . . . . . . . . . . . . . . . . . . . . . 18
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Audio System
Hard Drive Device (HDD) . . . . . . . 28
Audio/Video (A/V) Jacks . . . . . . . . . 46
Auxiliary Devices . . . . . . . . . . . . . . . . 42
Call Waiting . . . . . . . . . . . . . . . . 106, 117
Canadian Vehicle Owners
(Propriétaires des Véhicules
Canadiens) . . . . . . . . . . . . . . . . . . . . . . 3
Canceling Guidance . . . . . . . . . . . . . 12
Canceling Voice Recognition . . . . 93
CD Eject . . . . . . . . . . . . . . . . . . . . . . . . . 30
CD Menu . . . . . . . . . . . . . . . . . . . . . . . . 21
CD/DVD Player . . . . . . . . . . . . . . . . . . 18
CD/DVD/Disc Commands . . . . . . . 95
Cleaning the Display . . . . . . . . . . . . . 12
Cleaning the RSE Seatback
Console . . . . . . . . . . . . . . . . . . . . . . . . 53
Cleaning the Video Screen . . . . . . 53
Clearing the System . . . . . . . . . . . . 108
Conference Calling . . . . . . . . . . . . . 117
Config Setup Menu . . . . . . . . . . . . . . . 8
Configure Menu . . . . . . . . . . . . . . . . . 80
Database Coverage
Explanations . . . . . . . . . . . . . . . . . . . 92
Deleting Personal Information . . . . 8
Destination and Guidance
Commands . . . . . . . . . . . . . . . . . . . . . 97
Destination, Navigation . . . . . . . . . . 65
Devices, Auxiliary . . . . . . . . . . . . . . . 42
Dimming Mode . . . . . . . . . . . . . . . . . . 89
Display . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Driving on a Route . . . . . . . . . . . . . . . 62
Dual Tone
Multi-Frequency
(DTMF) Tones . . . . . . . . . . . . 108, 118
Duplicate Content . . . . . . . . . . . . . . . 30
DVD
Rear Seat Entertainment
System . . . . . . . . . . . . . . . . . . . . . . . . 43
DVD Display Error Messages . . . . 52
DVD Distortion . . . . . . . . . . . . . . . . . . 53
DVD/CD Player . . . . . . . . . . . . . . . . . . 18
B
Before Driving . . . . . . . . . . . . . . . . . . . 44
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . 101
Chevrolet Equinox and GMC Terrain Navigation System - 2011
i-2
Black plate (2,1)
INDEX
E
H
END USER LICENSE
AGREEMENT . . . . . . . . . . . . . . . . . 124
Ending a Call . . . . . . . . . . . . . . 106, 118
English and Metric Unit
Conversion . . . . . . . . . . . . . . . . . . . . . . 8
Entering an Address and Point
of Interest, and Storing Preset
Destinations . . . . . . . . . . . . . . . . . . . . . 9
Error Messages . . . . . . . . . . . . . . . . . 24
Handling the DVD Map Disc . . . . . 58
Hard Drive Device (HDD) . . . . . . . . 28
Headphones . . . . . . . . . . . . . . . . . . . . . 45
Helpful Hints for Speaking
Commands . . . . . . . . . . . . . . . . . . . . . 93
F
Favorite Route . . . . . . . . . . . . . . . . . . . 76
Finding a Station . . . . . . . . . . . . . . . . 15
G
General Navigation
Commands . . . . . . . . . . . . . . . . . . . . . 96
Getting Started on the Route . . . . 71
Global Off . . . . . . . . . . . . . . . . . . . . . . . 44
Global Positioning
System (GPS) . . . . . . . . . . . . . . . . . . 89
I
Installing the DVD Map Disc . . . . . 57
Introduction . . . . . . . . . . . . . . . . . . . . . . . 3
L
Languages . . . . . . . . . . . . . . . . . . . . . . . 8
Lat/Long Coordinates . . . . . . . . . . . . 70
Listing Stored Numbers . . . . . . . . . 105
Loading and Ejecting Discs . . . . . . 19
M
Making a Call . . . . . . . . . . . . . . 105, 114
Map Adjustments . . . . . . . . . . . . . . . . 58
Map Coverage . . . . . . . . . . . . . . . . . . . 57
Map Scales . . . . . . . . . . . . . . . . . . . . . . 58
Maps . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Menu
Configure . . . . . . . . . . . . . . . . . . . . . . . 80
Menu Screen Button . . . . . . . . . . . . . 77
Mixed-Band Presets . . . . . . . . . . . . . 16
MP3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Mute or UnMute a Call . . . . . . . . . . 118
Muting a Call . . . . . . . . . . . . . . . . . . . 107
N
Nav (Navigation) . . . . . . . . . . . . . . . . . 80
NAV (Navigation) Menu . . . . . . . . . . . 7
Navigation
Destination . . . . . . . . . . . . . . . . . . . . . 65
Symbols . . . . . . . . . . . . . . . . . . . . . . . . 60
Using the System . . . . . . . . . . . . . . . 53
Navigation Audio System . . . . . . . . 14
Navigation Buttons . . . . . . . . . . . . . . 53
Navigation Settings . . . . . . . . . . . . . . 55
Navigation System Overview . . . . . 6
Chevrolet Equinox and GMC Terrain Navigation System - 2011
Black plate (3,1)
INDEX
O
OnStar (if equipped)
Command . . . . . . . . . . . . . . . . . . . . . 100
Options Available on the Map
Screen . . . . . . . . . . . . . . . . . . . . . . . . . 63
Ordering
Map DVDs . . . . . . . . . . . . . . . . . . . . . . 91
Overview, Infotainment System . . . 4
P
Pairing a Phone Using the
Infotainment System . . . . . . . . . . 108
Phone
Bluetooth . . . . . . . . . . . . . . . . . . . . . 101
Pick From Map . . . . . . . . . . . . . . . . . . 70
Playing a CD/DVD . . . . . . . . . . . . . . . 20
Playing an Audio and
Video DVD . . . . . . . . . . . . . . . . . . . . . 22
Playing an Audio CD . . . . . . . . . . . . 20
Playing an MP3 CD and DVD . . . 25
Playing from an iPod® . . . . . . . . . . . 36
Playing from USB . . . . . . . . . . . . . . . . 33
Playing Hard Disc Drive
Content . . . . . . . . . . . . . . . . . . . . . . . . 30
Playing HDD Favorites . . . . . . . . . . 33
Playing the Radio . . . . . . . . . . . . . . . . 12
Point of Interest (POI)
Commands . . . . . . . . . . . . . . . . . . . . . 96
Power Mode . . . . . . . . . . . . . . . . . . . . . 30
Preset Destination . . . . . . . . . . . . . . . 71
Previous Destination . . . . . . . . . . . . . 69
Previous Destinations . . . . . . . . . . . 74
Problems with Route
Guidance . . . . . . . . . . . . . . . . . . . . . . 91
R
Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Radio Commands . . . . . . . . . . . . . . . 95
Radio Data System (RDS) . . . . . . . 17
Radio Settings . . . . . . . . . . . . . . . . . . . 15
Radios
AM-FM Radio . . . . . . . . . . . . . . . . . . . 12
CD/DVD Player . . . . . . . . . . . . . . . . . 18
Satellite . . . . . . . . . . . . . . . . . . . . . . . . . 18
i-3
Rear Seat Entertainment
System . . . . . . . . . . . . . . . . . . . . . . . . . 43
Receiving a Call . . . . . . . . . . . . . . . . 106
Recording from a CD to the
Hard Drive . . . . . . . . . . . . . . . . . . . . . 29
Recording from a USB Device
to the Hard Drive . . . . . . . . . . . . . . . 30
Remote Control . . . . . . . . . . . . . . . . . . 48
Route Preview . . . . . . . . . . . . . . . . . . . 73
S
Satellite Radio . . . . . . . . . . . . . . . . . . . 18
Scroll Features . . . . . . . . . . . . . . . . . . 59
Setting the Clock . . . . . . . . . . . . . . . . 89
Shuffle . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Storing and Deleting Phone
Numbers . . . . . . . . . . . . . . . . . . . . . . 103
Storing Preset Destinations . . . . . . 11
Storing Radio Station Presets . . . . 9
Symbols, Navigation . . . . . . . . . . . . . 60
System Needs Service, If . . . . . . . . 91
Chevrolet Equinox and GMC Terrain Navigation System - 2011
i-4
Black plate (4,1)
INDEX
T
V
Three‐Way Calling . . . . . . . . . . . . . . 106
Timeshift . . . . . . . . . . . . . . . . . . . . . . . . . 17
Touch Screen Buttons . . . . . . . . . . . 54
Transferring a Call . . . . . . . . . . . . . . 107
Vehicle
Positioning . . . . . . . . . . . . . . . . . . . . . 90
Video Screen Input Jack . . . . . . . . . 48
Video Screens . . . . . . . . . . . . . . . . . . . 47
Voice Guidance . . . . . . . . . . . . . . . . . . 12
Voice Pass-Thru . . . . . . . . . . . . . . . . 107
Voice Recognition . . . . . . . . . . . . . . . 92
Voice Recognition Commands . . . 94
Voice Recognition Help . . . . . . . . . . 94
Voice Tag Commands . . . . . . . . . . 100
U
USB Host Support . . . . . . . . . . . . . . . 33
USB Music Menu . . . . . . . . . . . . . . . . 34
USB Supported Devices . . . . . . . . . 33
Using Destination Download . . . . . 78
Using the Stored Preset
Destinations . . . . . . . . . . . . . . . . . . . . 11
Using Voice Recognition . . . . 92, 102
X
XM Categories . . . . . . . . . . . . . . . . . . . 18
XM NavTraffic™ (if equipped) . . . 80
XM™ Satellite Radio Service . . . . 18
XM™ Weather (if equipped) . . . . . 87
Download PDF