14. SERVICE MENU SETTINGS All system, geometry and white balance alignments are performed in production service mode. Before starting the production mode alignments, make sure that all manual adjustments are done correctly. To start production mode alignments enter the MENU by pressing “MENU” button and then press the digits 4, 7, 2 and 5 respectively. The following menu appears on the screen. display blank color black green red blue panel power on time : 23 30 backlight on time : 23 30 Vestel V1.0.10 Release Build scart prescale 25 nicam prescale 32 down to change display settings There are 4 submenus in service menu. These are display, calibration, deinterlacer and factory settings menus. Press “◄/►” buttons to select a menu title and then “▲/▼” buttons to select a menu item and “◄/►” or “OK” buttons to set the menu item to the desired option. To exit the service menu press “MENU” button. Entire service menu parameters of Plasma TV are listed below. 14.1. display menu By pressing “◄/►” buttons select the first icon. display menu appears on the screen. display blank color black green red blue panel power on time : 23 30 backlight on time : 23 30 Vestel V1.0.10 Release Build scart prescale 25 nicam prescale 32 down to change display settings blank color By pressing c/d button, select blank color. Press e/f button to set the blank color. The options are: black, red, green and blue. panel Displays panel resolution. power on time Displays total working time of the set. backlight on time Displays total backlight on time of the set. (Not used for plasma displays) scart prescale By pressing c/d button, select scart prescaler. Press e/f button to set the scart prescaler. Scart prescale can be adjusted between 0 and 127. nicam prescale By pressing c/d button, select nicam prescaler. Press e/f button to set the nicam prescaler. Nicam prescale can be adjusted between 0 and 127. display fm/am prescale 25 subwoofer corner 3 subwoofer level 9 agc adjustment 17 carrier mute enable disable virtual dolby enable disable virtual dolby hardware enable disable right/left to adjust item fm/am prescale By pressing c/d button, select fm/am prescaler. Press e/f button to set the fm/am prescaler. Fm/am prescale can be adjusted between 0 and 127. subwoofer corner By pressing c/d button, select subwoofer corner. Press e/f button to set the subwoofer corner. Subwoofer corner can be adjusted between 0 and 7. subwoofer level By pressing c/d button, select subwoofer level. Press e/f button to set the subwoofer level. Subwoofer level can be adjusted between 0 and 32. agc adjustment Adjustment for automatic gain control of tuner. By pressing c/d button, select agc adjustment. Press e/f button to set the agc adjustment. Agc adjustment can be adjusted between 0 and 31. carrier mute By pressing c/d button, select carrier mute. Press e/f button to enable or disable the sound carrier mute feature. virtual dolby By pressing c/d button, select virtual dolby. Press e/f button to enable or disable the virtual dolby feature in the audio menu of the TV. virtual dolby hardware By pressing c/d button, select virtual dolby hardware. Press e/f button to enable or disable the virtual dolby hardware feature of the TV. 14.2. calibration menu By pressing “◄/►” buttons select the second icon. calibration menu appears on the screen. calibration initial APS on off burn-in mode on off color temp 5500K 6500K 7500K 9300K user 6500K R G B auto video format down to change cal. settings, scrolling menu initial APS By pressing c/d button, select initial APS. Initial APS can be selected on or off. If initial aps is switched on, then the TV will display initial APS menu only for the first time it is switched on. burn-in mode By pressing c/d button, select burn-in mode. Press e/f button to set it on or off. color temp By pressing c/d button, select color temp. Press e/f button to set the color temperature. The options are: 5500K, 6500K, 7500K, 9300K and user. R/G/B If color temp is set as “user”, then R/G/B settings can be adjusted. By pressing c/d button, select Red, Green or Blue. Press f button to increase the color value. Press e button to decrease the color value. R/G/B values can be adjusted between 0 and 63. video format By pressing c/d button, select video format. Press e/f button to set the video format. The options are: auto, ntsc, pal, secam and ntsc japan. calibration colorspace test pattern color components RGB solid color none all red vert bars green solid field level factory reset 33 <ok> to activate main tuner Tuner 1 pip tuner teletext language blue Tuner 1 on right/left to adjust item off color space Displays the current color space used. RGB, YPbPr SMPTE240, YPbPr REC709 and YCbCr REC601. test pattern By pressing c/d button, select test pattern. Press e/f button to set the test pattern. The options are: none, solid color and vert bars. color components By pressing c/d button, select color components. Press e/f button to set the color components. The options are: all, red, green and blue. solid field level By pressing c/d button, select solid field level. Press f button to increase or e button to decrease the solid field level. Solid field level can be adjusted between 0 and 64. factory reset By pressing c/d button, select factory reset. Press “OK” button to return to the factory setting values. main tuner By pressing c/d button, select main tuner. Press e/f button to set a tuner as main tuner. pip tuner By pressing c/d button, select pip tuner. Press e/f button to set a tuner as pip tuner. teletext language By pressing c/d button, select teletext language. Press e/f button to set it on or off. When it is turned on, the teletext language option can be seen in the TV menu. 14.3. deinterlacer menu By pressing “◄/►” buttons select the third icon. deinterlacer menu appears on the screen. deinterlacer black expansion on off dcti 131 dlti 64 luminance peaking off on film mode off on 3 film mode speed off vof on down for deinterlacer settings, scrolling menu black expansion By pressing c/d button, select black expansion. Black expantion can be set to on or off by pressing e/f button. dcti Digital colour transition improvement: By pressing c/d button, select dcti. DCTI can be adjusted between 0 and 255 by pressing e/f button. dlti Digitial luma transition improvement: By pressing c/d button, select dlti. DLTI can be adjusted between 0 and 255 by pressing e/f button. luminance peaking By pressing c/d button, select luminance peaking. Luminance peaking can be set to on or off by pressing e/f button. film mode By pressing c/d button, select film mode. Film mode speed can be set to on or off by pressing e/f button. deinterlacer on vof off bad cut off on nr threshold low high 40 noise reduction 2 lai level sharpness 10 sparkle 255 right/left to adjust item film mode speed By pressing c/d button, select film mode speed. Film mode speed can be set to 0, 1, 2 or 3 by pressing e/f button. vof video on film. By pressing c/d button, select vof. VOF can be set to on or off by pressing e/f button. bad cut By pressing c/d button, select vof. Bad cut can be set to on or off by pressing e/f button. nr threshold By pressing c/d button, select nr threshold. Nr threshold can be set to low or high by pressing e/f button. noise reduction By pressing c/d button, select noise reduction. Noise reduction can be adjusted between 0 and 255 by pressing e/f button. lai level By pressing c/d button, select lai level. Lai level can be set to 0, 1 or 2 by pressing e/f button. sharpness By pressing c/d button, select sharpness. Sharpness can be adjusted between 0 and 255 by pressing e/f button. sparkle By pressing c/d button, select sparkle. Sparkle can be adjusted between 0 and 255 by pressing e/f button. 14.4. factory settings menu By pressing “◄/►” buttons select the fourth icon. Factory settings menu appears on the screen. factory settings brightness 77 contrast 50 sharpness 6 color 31 volume 21 hp volume 33 down to change factory settings Brightness, contrast, sharpness, color, volume and headphone volume factory settings can be seen in this menu. When factory reset is selected in the calibration menu, the values in the factory settings menu will be seen in the TV menus.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021