Draper | R2D7 | User manual | Scissor Lift Submittal & Planning Sheet for SL

Add to My manuals
8 Pages

advertisement

Draper | R2D7 | User manual | Scissor Lift Submittal & Planning Sheet for SL | Manualzz

Scissor Lift Submittal & Planning

by

Sheet for SL Series

U.S. Patent D395,909

Planning sheet submission required with your order or request for quotation. Please mark appropriate response to each numbered item (front and back)

Specifi cations—Scissor Lift SL

video projector lifts for projectors weighing up to 100 lbs. White powder coat fi nish. Projector bolts onto operating pan, or mounts to pan with mounting bracket (by others). Electrically op er at ed 110-120V AC, 60 Hz. UL rec og nized gearmotor, with metal chain drive system, to be lifetime lubricated.

Projector to be sus pend ed from steel pan supported by steel scissor arms and operated by two, 1 /

8

" aircraft cables with 2000 foot/pounds tensile strength per cable.

Equipped with 3 sets of stabilizing scissors, positioned on the left, right, and rear sides. Also equipped with fail-safe inertial safety belt system and Cable

Management System with projector power outlet. Factory set limit switches to automatically stop travel at store, show, and service positions. Single Station

Control, standard, consists of one 3-button wall switch switch to lower lift from

“stored” to “show ” position, and one momentary key switch to lower lift to

“service” position.

Optional Environmental Air Space Housing: Consists of suitable steel panels for use in return Environmental Air Space situations. Four sizes available.

Optional ceiling closure panel: Finished in white baked textured powder coat, shall descend smoothly with projector. Four sizes available.

Ceiling Finish Kit: Finished white. Trims ceiling opening when required.

Consists of trim ring and closure panel. Four sizes available.

Factory-installed control cables available.

Please Note: The Scissor Lift SL should be specifi ed in conjunction with a

Draper motorized screen.

Optional Ceiling Access Door: Provides access to projector and lift when unit is installed above hard ceiling. Two styles: White painted fi nish or accepts ceiling tile.

Optional Universal Projector Mount: Fits most projectors up to 26 lbs. Tilt, yaw and pan adjustment.

Downloadable 3-part specifi cations are available at www.draperinc.com.

U.S. Patent Number D395,909.

Select one model based on the maximum exact distance you need the projector to descend from “store” position to

Scissor Lift—SL Series

4 ft.—Model SL4

Quantity

6 ft.—Model SL6

8 ft.—Model SL8

10 ft.—Model SL10

12 ft.—Model SL12

Table A

Model Height Height

SL4 8" 4'

SL6 10"

SL8 12"

SL10 14"

SL12 16"

6'

8'

10'

12'

For drawings/dimensions with Environmental Air Space

Housing, see page 3.

Top View

20¾"

24 5 /

8

"

Standard, factory set “show” position is 36" below “store” position. “Show” position can be adjusted after installation.

For “show” position of more or less than 36", list show

position:

See

Table

"A"

20 11 /

16

"

20 5 /

8

"

DRAPER SALESPERSON:

CUSTOMER CONTACT:

SIGNATURE:

®

Copyright © 2011 Draper Inc. Form ScissorLiftSL_Sub-PlanSheet11-R Printed in U.S.A.

There are four sizes of

See separate instructions closure. See page 2.

Front View

(Continued on Page 2)

DEALER NAME:

PROJECT NAME:

There are four sizes of

See separate instructions closure. See page 2.

Side View

P.O. #:

DATE:

Scissor Lift Submittal & Planning Sheet for SL Series

page 2 of 4

③ Select Optional Accessories

Optional Ceiling Access Door (2' x 2') to allow access above fi nished ceiling (highly recommended).

White Painted Finish Accepts Ceiling Tile

Optional Environmental Air Space Housing: optional ceiling closure panel not included (see dimensional drawings below).

"B" "E" "SL" "U"

Optional ceiling closure panel (see dimensional drawings on page 3).

"B" "E" "SL" "U"

Optional ceiling fi nish kit: consists of ceiling closure panel and mating trim kit to fi nish ceiling opening (see dimensional drawings on page 3).

"B" "E" "SL" "U"

Optional Universal Projector Mount (max. load 26 lbs).

Select factory installed hookup for RGB, Video and Projector Control?

Yes No

What type of connectors do you need on Inputs (to Projector)?

BNC How Many?

15 Pin HD

RCA

How Many?

How Many?

S-Video How Many?

RS232 (DB9) How Many?

Cat 5

Cat 6

How Many?

How Many?

What type of connectors do you need on Outputs (up at top of Lift)?

BNC

15 Pin HD

RCA

How Many?

S-Video

RS232 (DB9) How Many?

Cat 5

Cat 6

How Many?

How Many?

Select Voltage:

110-120V

220-230V

Select Controls: This unit comes with one 3-Button Wall Switch and one Momentary Key Control. For other switching options, please select from below:

Replace 3-Button Wall Switch with optional second Momentary Key Control (SP-KSM)

Optional Key Operated Power Supply Key Switch (On-off)

Optional Wireless Remote Control (radio frequency transmitter & receiver) (Controls the "Show" position only)

Optional Wireless Remote Control (infrared transmitter & receiver) (Controls the "Show" position only)

Optional R2D7 RS232 interface for Serial Communication (Controls the "Show" position only)

Will this unit be controlled by other equipment?

No.

Yes. What kind of equipment?

Optional Ceiling Closure

E

E

F

Top View

C

F

Top View

C A

A

D

Front/Back View

B

Side View

Closures B, E and U

Optional Ceiling Closure Dimensions

Dim Closure B Closure E Closure SL Closure U

A 26" 25¾" 18 13 /

16

" 27"

B 28 3 /

16

" 38 7 /

16

" 22 1 /

16

" 35 1 /

8

"

C

D

E

F

21 1 /

8

" 25¾" 18 13 /

16

" 31¼"

28 3 /

16

" 27 15 /

16

" 22 1 /

16

" 35 1 /

8

"

30 9 /

16

" 40 13 /

16

" 24 3 /

8

" 37 11 /

16

"

30 9 /

16

" 30 5 /

16

" 24 3 /

8

" 37 11 /

16

" www.draperinc.com

D B

Front/Back View Side View

Closure SL (Standard)

DRAPER SALESPERSON:

CUSTOMER CONTACT:

(765) 987-7999

SIGNATURE:

Scissor Lift Submittal & Planning Sheet for SL Series

page 3 of 4

Scissor Lift SL—Dimensions & Data

Height of lift in closed position

Max. down travel

(to service position)

Net Weight (lbs)

Estimated Travel Time 1

1

SL4 SL6 SL8 SL10 SL12

8" (21 cm)

4' (122 cm)

88 (40 kg)

72 sec.

10" (26 cm)

6' (183 cm)

12" (31 cm)

8' (244 cm)

14" (36 cm)

10' (305 cm)

16" (41 cm)

12' (366 cm)

1 Height of Scissor Lift in closed position only. Overall height of projector, plus optional mount, plus optional ceiling closure, plus optional Environmental Air

Space Housing adds to overall height of equipment installed above ceiling.

2 Based on travel speed of 90 inches per minute.

96 (44 kg)

108 sec.

104 (48 kg)

144 sec.

111 (51 kg)

180 sec.

118 (54 kg)

216 sec.

Optional Environmental Air Space Housing

B

Top View

C

E

Side View

A

B

Side View

A

D

F

G

5 3 /

16

"

Dim

A

Environmental Air Space Housing Dimensions

B

27½"

E

27¼"

SL U

18 9 /

16

" 26½"

B

C

22 5 /

8

" 31¾" 20 5 /

16

" 34 5 /

8

"

29 7 /

16

" 39 11 /

16

" 23 1 /

16

" 36 9 /

16

"

D 16"-36 5 /

8

" 16"-36 5 /

8

" 16"-36 5 /

8

" 16"-36 5 /

8

"

E 30¼" 40½" 24 1 /

16

" 37 11 /

16

"

F

G

H

30¼" 30" 23 7 /

8

" 37 1 /

8

"

15 1 /

8

" 15" 11 5 /

16

" 18 11 /

16

"

30¼" 30" 24 1 /

16

" 37 11 /

16

"

H

Front/BackView

C

Optional Ceiling Trim Kit Dims

D

Dim

A

B

C

D

E

B

Ceiling Trim Kit Dimensions

30¼"

E

40½"

SL U

24 1 /

16

" 37 3 /

8

"

29 1 /

8

" 39 3 /

8

" 22 15 /

16

" 36¼"

26" 25¾" 18 13 /

16

" 27"

18 11 /

16

" 18 9 /

16

" 19 5 /

8

" 18 9 /

16

"

28¼" 27 15 /

16

" 22 1 /

16

" 35 1 /

8

"

E

Front/Back View

www.draperinc.com

DRAPER SALESPERSON:

CUSTOMER CONTACT:

(765) 987-7999

SIGNATURE:

Scissor Lift Submittal & Planning Sheet for SL Series

Wiring Diagram

RD

Up Limit Switch

BK BK

RD

BN

WH

YL

BK

YL/GN

BN

Down Limit Switch

RD RD

Motor

BL BL

WH

WH

WH

125V 10A Outlet

GN

WH

page 4 of 4

BK

BK

Show Limit Switch

WH

RD

Dashed wiring by electrician

WH

RD

110 - 120 Vac Supply

Key Switch

Wall Switch

Low voltage wiring by others

Low Voltage Trigger (6 - 24 VDC)

RP/RQ Bus Ports for remote controls such as

Eye Port for IR Eye, RF Receiver, LED Wall Switch and RS232.

Function Indicator

Connecting Controls

Controls plug into the data cable inputs on the Control Panel, which is located on the Top Frame on the front side of the lift, using RJ14 connectors.

For IR or RF Remote Control, use data cable with RJ14 connectors on both ends.

For serial control of "Show" position, use data cable with RJ14 connectors on both ends and an R2D7 Serial Control Interface.

Plug into the "RP/RQ" input.

Any control, including automated dry contact systems, being connected to the wall switch input MUST send a momentary signal.

KS-3

Pin

1 2 3 4 5 6

Y G R B

Pin

1 2 3 4 5 6

Y G R B

Low Voltage Trigger

(6-24 VDC)

RP/RQ Bus Ports for remote controls such as

IR Eye, RF Receiver, LED

Wall Switch and RS232

LVC-S

Pin

1 2 3 4 5 6

Y G R B

Red - Down

Black - Com

Black - Com

Blue - Up

Green

Black

Yellow

DCU

Green

Black

Yellow

Please Note:

Data cable connections must be made using electrically straight 4-conductor modular cable (RJ14). If making your own cables, this means colors do not cross over: blue leads to blue, green to green, etc. (see diagram below).

Pin

1 2 3 4 5 6

Y G R B

Pin

1 2 3 4 5 6

Y G R B

Pin

6 5 4 3 2 1

B R G Y

To RS232 Port:

Yellow = Rx (Data from control system)

Green = Tx (Data to control system)

Red = Unused

Black = Gnd (Signal Ground)

(765) 987-7999

DRAPER SALESPERSON:

CUSTOMER CONTACT:

SIGNATURE: www.draperinc.com

Scissor Lift Submittal & Planning

by

Sheet for SLX Series

U.S. Patent D395,909

Planning sheet submission required with your order or request for quotation. Please mark appropriate response to each numbered item (front and back)

Specifi cations—Scissor Lift SLX

video projector lifts for projectors weighing up to 350 lbs. White powder coat fi nish. Projector bolts onto operating pan, or mounts to pan with mounting bracket (by others). Electrically op er at ed 110-120V AC, 60 Hz. UL rec og nized gearmotor, with metal chain drive system, to be lifetime lubricated.

Projector to be sus pend ed from steel pan supported by steel scissor arms and operated by two, 3 /

16

" aircraft cables with 4200 foot/pounds tensile strength per cable.

Equipped with 3 sets of stabilizing scissors, positioned on the left, right, and rear sides. Also equipped with fail-safe inertial safety belt system and Cable

Management System with projector power cord. Factory set limit switches to automatically stop travel at store, show, and service positions. Single Station

Control, standard, consists of one 3-button wall switch switch to lower lift from

“stored” to “show ” position, and one momentary key switch to lower lift to

“service” position.

Optional Environmental Air Space Housing: Consists of suitable painted steel panels for use in return air plenum situations.

Optional ceiling closure panel: Finished in white baked textured powder coat, shall descend smoothly with projector.

Ceiling Finish Kit: Finished white. Trims ceiling opening when required.

Consists of trim ring and closure panel.

Factory-installed control cables available.

Please Note: The Scissor Lift SLX should be specifi ed in conjunction with a

Draper motorized screen.

Optional Ceiling Access Door: Provides access to projector and lift when unit is installed above hard ceiling. Two styles: White painted fi nish or accepts ceiling tile.

Downloadable 3-part specifi cations are available at www.draperinc.com.

U.S. Patent Number D395,909.

Select one model based on the maximum exact distance you need the projector to descend from “store” position to

Scissor Lift—SLX Series

10 ft.—Model SLX10

14 ft.—Model SLX14

17 ft.—Model SLX17

21 ft.—Model SLX21

24 ft.—Model SLX24

28 ft.—Model SLX28

32 ft.—Model SLX32

Quantity

Table A

Model Height Height

SLX10 14 1 /

16

" 10'7"

SLX14 16 5 /

16

" 14'2"

SLX17 18 9 /

16

" 17'8"

SLX21 20 13 /

16

" 21'3"

SLX24 23 1 /

16

" 24'9"

SLX28 25 5 /

16

" 28'5"

SLX32 27 9 /

16

" 32'1"

35 9 /

16

"

37 11 /

16

"

Top View

38 5 /

16

"

36 3 /

16

"

For drawings/dims with Environmental Air

Space Housing, see page 3.

Standard, factory set “show” position is 36" below “store” position. “Show” position can be adjusted after installation.

For “show” position of more or less than 36", list show

position:

See

Table

A

DRAPER SALESPERSON:

CUSTOMER CONTACT:

SIGNATURE:

®

Copyright © 2011 Draper Inc. Form ScissorLiftSLX_Sub-PlanSheet11 Printed in U.S.A.

1 /

8

"

35"

36¼"

39 11 /

16

"

42"

Front View

(Continued on Page 2)

1 5 /

8

"

DEALER NAME:

PROJECT NAME:

P.O. #:

DATE:

35 7 /

16

"

37 1 /

16

"

42"

Side View

Scissor Lift Submittal & Planning Sheet for SLX Series

page 2 of 4

③ Select Optional Accessories

Optional Ceiling Access Door (2 x 2) to allow access above fi nished ceiling (highly recommended)

White Painted Finish Accepts Ceiling Tile

Optional Environmental Air Space Housing: optional ceiling closure panel not included.

B) If you selected the Environmental Air Space Housing option please provide the following information:

Projector Size H x W x L: Bracket height: Available space above ceiling:

Optional ceiling closure panel.

Optional ceiling fi nish kit: consists of ceiling closure panel and mating trim kit to fi nish ceiling opening.

Optional Universal Projector Mount (max. load 26 lbs.).

Select factory installed hookup for RGB, Video and Projector Control?

Yes No

What type of connectors do you need on Inputs (to Projector)?

BNC How Many?

15 Pin HD

RCA

How Many?

How Many?

S-Video How Many?

RS232 (DB9) How Many?

Cat 5

Cat 6

How Many?

How Many?

What type of connectors do you need on Outputs (up at top of Lift)?

BNC

15 Pin HD

RCA

How Many?

S-Video

RS232 (DB9) How Many?

Cat 5

Cat 6

How Many?

How Many?

Select Voltage:

110-120V

220-230V

Select Controls: This unit comes with one 3-Button Wall Switch and one Momentary Key Control. For other switching options, please select from below:

Replace 3-Button Wall Switch with optional second Momentary Key Control (SP-KSM)

Optional Key Operated Power Supply Key Switch (On-off)

Optional Wireless Remote Control (radio frequency transmitter & receiver) (Controls the "Show" position only)

Optional Wireless Remote Control (infrared transmitter & receiver) (Controls the "Show" position only)

Optional R2D7 RS232 interface for Serial Communication (Controls the "Show" position only)

Will this unit be controlled by other equipment?

No.

Yes. What kind of equipment?

Optional Ceiling Closure

9

8

3

2

7

4

6

Item Qty

① 1

Part Number

C028.546

② 1 C044.181.07SA

③ 2 C002.845.07SA

Description

Frame, SLX Closure Trim

Panel, SLX Assembled Closure

Bracket, SLX Closure

/

8

"-16 x 17 7 /

8

" L Threaded , Zinc

⑤ 8

⑥ 8

C013.050

C020.082

Washer .375 I.D. x .875" O.D.

x .064" TK GRD 2 Zinc Flat

Screw, 10-16 X ½" 6 Lobe

Truss Head AB E-White

⑦ 16 C018.027

⑧ 4 /

16

"-18 x ¾" Long Grade 5 HH Zinc

⑨ 4 C018.045

7

5

1

SLX Scissor Lift—Dimensions & Data

Max. down travel

(to service position)

SLX10 SLX14 SLX17 SLX21 SLX24 SLX28 SLX32

Height of lift in closed position 1 14 1 /

16

" (36 cm) 16 5 /

16

" (41 cm) 18 9 /

16

" (47 cm) 20 13 /

16

" (53 cm) 23 1 /

16

" (59 cm) 25 5 /

16

" (64 cm) 27 9 /

16

" (70 cm)

10'7" (323 cm) 14'2" (432 cm) 17'8" (538 cm) 21'3" (648 cm) 24'9" (754 cm) 28'5" (866 cm) 32'1" (978 cm)

Net weight—lbs.

Approx. travel time 2

(to service position)

216

1 min. 43 sec.

230

2 min. 24 sec.

260

2 min. 55 sec.

275

3 min. 36 sec.

289

4 min. 7 sec.

303

4 min. 48 sec.

318

5 min. 30 sec.

1 Height of Scissor Lift in closed position only. Overall height of projector, plus optional mount, plus optional ceiling closure, plus optional Environmental Air

Space Housing adds to overall height of equipment installed above ceiling.

2 Up direction with full load of 350 lbs. "Down" travel time or lighter loads will have shorter travel times.

DRAPER SALESPERSON: www.draperinc.com

CUSTOMER CONTACT:

(765) 987-7999 SIGNATURE:

4

Scissor Lift Submittal & Planning Sheet for SLX Series

Optional Environmental Air Space Housing

11

11 11

11

7

11

11

1

11

3

3

Side

5

8

11

5

6

4

3

2

Front/Back

Do not use electrical knockouts on bottom sections

10

9

9

3

page 3 of 4

Item Qty Part Number

① 1 C028.544.02SA

② 1 C028.545.07SA

③ 4 C044.178SA

Description

Frame, SLX Plenum

Frame, SLX Trim Ring

Panel, SLX Plenum Side

④ 4 C044.180SA

⑤ 2 C044.179SA

Panel, SLX Plenum End

Panel, SLX Middle End

⑥ 2 C044.177SA Panel, SLX Plenum Middle Side

⑦ 1 C095.123SA Cover, SLX Plenum

⑧ 28 C020.325 Screw, 8-32 x 3 /

8

" Type 1 HWH

⑨ 40 C018.051

⑩ 12 C013.070

Nut #8-32 Zinc Hex KEPS

Washer, .188 I.D. x .5 O.D. x

.07" TK Nylon Flat

⑪ 24 C020.112 Screw, 8-32 x 3 /

8

" Type F HWH

41¾"

41½"

20¾"

5"

48½"-22½"

19"

Front/Back View

www.draperinc.com

Side View

DRAPER SALESPERSON:

CUSTOMER CONTACT:

(765) 987-7999 SIGNATURE:

Scissor Lift Submittal & Planning Sheet for SLX Series

Wiring Diagram

RD

Up Limit Switch

BK BK

RD

BN

WH

YL

BK

YL/GN

BN

Down Limit Switch

RD RD

Motor

BL BL

WH

WH

WH

125V 10A Outlet

GN

WH

page 4 of 4

BK

BK

Show Limit Switch

WH

RD

Dashed wiring by electrician

WH

RD

110 - 120 Vac Supply

Key Switch

Wall Switch

Low voltage wiring by others

Low Voltage Trigger (6 - 24 VDC)

RP/RQ Bus Ports for remote controls such as

Eye Port for IR Eye, RF Receiver, LED Wall Switch and RS232.

Function Indicator

Connecting Controls

Controls plug into the data cable inputs on the Control Panel, which is located on the Top Frame on the front side of the lift, using RJ14 connectors.

For IR or RF Remote Control, use data cable with RJ14 connectors on both ends.

For serial control of "Show" position, use data cable with RJ14 connectors on both ends and an R2D7 Serial Control Interface.

Plug into the "RP/RQ" input.

Low Voltage Trigger

(6-24 VDC)

RP/RQ Bus Ports for remote controls such as

IR Eye, RF Receiver, LED

Wall Switch and RS232

LVC-S

Pin

1 2 3 4 5 6

Y G R B

KS-3

Pin

1 2 3 4 5 6

Y G R B

Pin

1 2 3 4 5 6

Y G R B

Red - Down

Black - Com

Black - Com

Blue - Up

Green

Black

Yellow

DCU

Green

Black

Yellow

Please Note:

Data cable connections must be made using electrically straight 4-conductor modular cable (RJ14). If making your own cables, this means colors do not cross over: blue leads to blue, green to green, etc. (see diagram below).

Pin

1 2 3 4 5 6

Y G R B

Pin

1 2 3 4 5 6

Y G R B

Pin

6 5 4 3 2 1

B R G Y

To RS232 Port:

Yellow = Rx (Data from control system)

Green = Tx (Data to control system)

Red = Unused

Black = Gnd (Signal Ground)

(765) 987-7999

DRAPER SALESPERSON:

CUSTOMER CONTACT:

SIGNATURE: www.draperinc.com

advertisement

Related manuals

advertisement