Draper | R2D7 | Scissor Lift Submittal & Planning Sheet for SL - Video

Scissor Lift Submittal & Planning
Sheet for SL Series
by
U.S. Patent D395,909
Planning sheet submission required with your order or request for quotation. Please mark appropriate response to each
numbered item (front and back)
Specifications—Scissor Lift SL
video projector lifts for projectors weighing up to 100 lbs. White
powder coat finish. Projector bolts onto operating pan, or mounts to pan with
mounting bracket (by others). Electrically operated 110-120V AC, 60 Hz. UL
recognized gearmotor, with metal chain drive system, to be lifetime lubricated.
Projector to be suspended from steel pan supported by steel scissor arms
and operated by two, 1/8" aircraft cables with 2000 foot/pounds tensile strength
per cable.
Equipped with 3 sets of stabilizing scissors, positioned on the left, right, and
rear sides. Also equipped with fail-safe inertial safety belt system and Cable
Management System with projector power outlet. Factory set limit switches to
automatically stop travel at store, show, and service positions. Single Station
Control, standard, consists of one 3-button wall switch switch to lower lift from
“stored” to “show ” position, and one momentary key switch to lower lift to
“service” position.
Optional Environmental Air Space Housing: Consists of suitable steel
panels for use in return Environmental Air Space situations. Four sizes
available.
Optional ceiling closure panel: Finished in white baked textured powder
coat, shall descend smoothly with projector. Four sizes available.
Ceiling Finish Kit: Finished white. Trims ceiling opening when required.
Consists of trim ring and closure panel. Four sizes available.
Factory-installed control cables available.
Please Note: The Scissor Lift SL should be specified in conjunction with a
Draper motorized screen.
Optional Ceiling Access Door: Provides access to projector and lift when
unit is installed above hard ceiling. Two styles: White painted finish or accepts
ceiling tile.
Optional Universal Projector Mount: Fits most projectors up to 26 lbs. Tilt,
yaw and pan adjustment.
Downloadable 3-part specifications are available at www.draperinc.com.
U.S. Patent Number D395,909.
① Select one model based on the maximum exact distance you need the projector to descend from “store” position to
“service” position.
Scissor Lift—SL Series
Quantity
Model
Table A
Closed Extended
Height
Height
4 ft.—Model SL4
SL4
8"
4'
6 ft.—Model SL6
SL6
10"
6'
8 ft.—Model SL8
SL8
12"
8'
10 ft.—Model SL10
SL10
14"
10'
12 ft.—Model SL12
SL12
16"
12'
For drawings/dimensions with Environmental Air Space
Housing, see page 3.
Top View
245/8"
20¾"
② Standard, factory set “show” position is 36" below “store”
position. “Show” position can be adjusted after installation.
For “show” position of more or less than 36", list show
position:
See
Table
"A"
2011/16"
There
areare
four four
sizes of
closure.
There
sizes
of
See separate instructions
closure.
Seeandpage
for details
dims. 2.
Front View
DRAPER SALESPERSON:
(Continued on Page 2)
CUSTOMER CONTACT:
DEALER NAME:
SIGNATURE:
®
PROJECT NAME:
P.O. #:
Copyright © 2011 Draper Inc. Form ScissorLiftSL_Sub-PlanSheet11-R Printed in U.S.A.
DATE:
205/8"
There
areare
fourfour
sizes sizes
of closure.
There
of
See separate instructions
closure.
Seeand
page
for details
dims.2.
Side View
Scissor Lift Submittal & Planning Sheet for SL Series
page 2 of 4
③ Select Optional Accessories
Optional Ceiling Access Door (2' x 2') to allow access above finished ceiling (highly recommended).
White Painted Finish
Accepts Ceiling Tile
Optional Environmental Air Space Housing: optional ceiling closure panel not included (see dimensional drawings below).
"B"
"E"
"SL"
"U"
Optional ceiling closure panel (see dimensional drawings on page 3).
"B"
"E"
"SL"
"U"
Optional ceiling finish kit: consists of ceiling closure panel and mating trim kit to finish ceiling opening (see dimensional drawings on page 3).
"B"
"E"
"SL"
"U"
Optional Universal Projector Mount (max. load 26 lbs).
④ Select factory installed hookup for RGB, Video and Projector Control?
Yes
No
What type of connectors do you need on Inputs (to Projector)?
BNC
How Many?
15 Pin HD
How Many?
RCA
How Many?
S-Video
How Many?
RS232 (DB9) How Many?
Cat 5
How Many?
Cat 6
How Many?
What type of connectors do you need on Outputs (up at top of Lift)?
BNC
How Many?
15 Pin HD
How Many?
RCA
How Many?
S-Video
How Many?
RS232 (DB9) How Many?
Cat 5
How Many?
Cat 6
How Many?
⑤ Select Voltage:
110-120V
220-230V
⑥ Select Controls: This unit comes with one 3-Button Wall Switch and one Momentary Key Control. For other switching
options, please select from below:
Replace 3-Button Wall Switch with optional second Momentary Key Control (SP-KSM)
Optional Key Operated Power Supply Key Switch (On-off)
Optional Wireless Remote Control (radio frequency transmitter & receiver) (Controls the "Show" position only)
Optional Wireless Remote Control (infrared transmitter & receiver) (Controls the "Show" position only)
Optional R2D7 RS232 interface for Serial Communication (Controls the "Show" position only)
⑦ Will this unit be controlled by other equipment?
No.
Yes. What kind of equipment?
Optional Ceiling Closure
E
E
F
F
Top View
Top View
D
B
Front/Back View
Side View
Closures B, E and U
Dim
A
C
A
C
D
B
Front/Back View
Side View
Closure SL (Standard)
Optional Ceiling Closure Dimensions
Closure B Closure E
Closure SL
Closure U
A
26"
25¾"
1813/16"
27"
B
3
28 /16"
7
38 /16"
1
22 /16"
351/8"
C
211/8"
25¾"
1813/16"
31¼"
D
3
28 /16"
15
27 /16"
1
22 /16"
351/8"
E
9
30 /16"
13
40 /16"
3
24 /8"
11
37 /16"
F
309/16"
305/16"
243/8"
3711/16"
www.draperinc.com
DRAPER SALESPERSON:
CUSTOMER CONTACT:
(765) 987-7999
SIGNATURE:
Scissor Lift Submittal & Planning Sheet for SL Series
page 3 of 4
Scissor Lift SL—Dimensions & Data
SL4
SL6
SL8
SL10
SL12
Height of lift in closed position1
8" (21 cm)
10" (26 cm)
12" (31 cm)
14" (36 cm)
16" (41 cm)
Max. down travel
4' (122 cm)
6' (183 cm)
8' (244 cm)
10' (305 cm)
12' (366 cm)
(to service position)
Net Weight (lbs)
88 (40 kg)
96 (44 kg)
104 (48 kg)
111 (51 kg)
118 (54 kg)
Estimated Travel Time1
72 sec.
108 sec.
144 sec.
180 sec.
216 sec.
1
Height of Scissor Lift in closed position only. Overall height of projector, plus optional mount, plus optional ceiling closure, plus optional Environmental Air
Space Housing adds to overall height of equipment installed above ceiling.
2
Based on travel speed of 90 inches per minute.
Optional Environmental Air Space Housing
A
Dim
B
Top View
F
C
G
53/16"
D
E
H
Side View
Front/BackView
Environmental Air Space Housing Dimensions
B
E
SL
9
U
A
27½"
27¼"
18 /16"
26½"
B
225/8"
31¾"
205/16"
345/8"
C
297/16"
3911/16"
231/16"
369/16"
D
16"-365/8"
16"-365/8"
16"-365/8"
16"-365/8"
1
E
30¼"
40½"
24 /16"
3711/16"
F
30¼"
30"
237/8"
371/8"
G
1
15 /8"
15"
5
11 /16"
1811/16"
H
30¼"
30"
241/16"
3711/16"
Optional Ceiling Trim Kit Dims
B
A
30¼"
40½"
241/16"
373/8"
B
291/8"
393/8"
2215/16"
36¼"
C
26"
25¾"
1813/16"
27"
D
11
18 /16"
9
18 /16"
5
19 /8"
189/16"
E
28¼"
2715/16"
221/16"
351/8"
16
D
Ceiling Trim Kit Dimensions
E
SL
Dim
1811
C
4"
A
B
E
Side View
Front/Back View
DRAPER SALESPERSON:
CUSTOMER CONTACT:
www.draperinc.com
(765) 987-7999
SIGNATURE:
U
Scissor Lift Submittal & Planning Sheet for SL Series
page 4 of 4
Wiring Diagram
RD
Up Limit Switch
BK
BK
RD
BN
WH
YL
BK
YL/GN
BN
BL
Down Limit Switch
BL WH
WH
WH
RD
RD
WH
125V 10A Outlet
Motor
GN
BK
BK
Show Limit Switch
WH
RD
Dashed wiring by electrician
WH
RD
N
110 - 120 Vac Supply
Low voltage wiring by others
Key Switch
Wall Switch
Low Voltage Trigger (6 - 24 VDC)
RP/RQ Bus Ports for remote controls such as
Eye Port for IR Eye, RF Receiver, LED Wall Switch
and RS232.
Controls plug into the data cable inputs on the Control Panel,
which is located on the Top Frame on the front side of the lift,
using RJ14 connectors.
For IR or RF Remote Control, use data cable with RJ14
connectors on both ends.
Pin
123456
YGRB
For serial control of "Show" position, use data cable with RJ14
connectors on both ends and an R2D7 Serial Control Interface.
Plug into the "RP/RQ" input.
LVT
Low Voltage Trigger
(6-24 VDC)
Pin
123456
YGRB
Any control, including automated dry contact systems, being
connected to the wall switch input MUST send a momentary signal.
RP/RQ
RP/RQ
Connecting Controls
WALL
KEY
Function Indicator
RP/RQ Bus Ports for
remote controls such as
IR Eye, RF Receiver, LED
Wall Switch and RS232
LVC-S
KS-3
Red - Down
Black - Com
Black - Com
Blue - Up
Pin
123456
YGRB
Green
Black
DCU
Yellow
Green
Black
Yellow
Please Note:
Data cable connections must be made
using electrically straight 4-conductor
modular cable (RJ14). If making your own
cables, this means colors do not cross
over: blue leads to blue, green to green,
etc. (see diagram below).
Pin
123456
YGRB
Pin
654321
B R GY
Pin
123456
YGRB
To RS232 Port:
Yellow = Rx (Data from control system)
Green = Tx (Data to control system)
Red = Unused
Black = Gnd (Signal Ground)
DRAPER SALESPERSON:
CUSTOMER CONTACT:
SIGNATURE:
www.draperinc.com
(765) 987-7999
Scissor Lift Submittal & Planning
Sheet for SLX Series
by
U.S. Patent D395,909
Planning sheet submission required with your order or request for quotation. Please mark appropriate response to each
numbered item (front and back)
Specifications—Scissor Lift SLX
video projector lifts for projectors weighing up to 350 lbs. White
powder coat finish. Projector bolts onto operating pan, or mounts to pan with
mounting bracket (by others). Electrically operated 110-120V AC, 60 Hz. UL
recognized gearmotor, with metal chain drive system, to be lifetime lubricated.
Projector to be suspended from steel pan supported by steel scissor arms
and operated by two, 3/16" aircraft cables with 4200 foot/pounds tensile
strength per cable.
Equipped with 3 sets of stabilizing scissors, positioned on the left, right, and
rear sides. Also equipped with fail-safe inertial safety belt system and Cable
Management System with projector power cord. Factory set limit switches to
automatically stop travel at store, show, and service positions. Single Station
Control, standard, consists of one 3-button wall switch switch to lower lift from
“stored” to “show ” position, and one momentary key switch to lower lift to
“service” position.
Optional Environmental Air Space Housing: Consists of suitable painted
steel panels for use in return air plenum situations.
Optional ceiling closure panel: Finished in white baked textured powder
coat, shall descend smoothly with projector.
Ceiling Finish Kit: Finished white. Trims ceiling opening when required.
Consists of trim ring and closure panel.
Factory-installed control cables available.
Please Note: The Scissor Lift SLX should be specified in conjunction with a
Draper motorized screen.
Optional Ceiling Access Door: Provides access to projector and lift when
unit is installed above hard ceiling. Two styles: White painted finish or accepts
ceiling tile.
Downloadable 3-part specifications are available at www.draperinc.com.
U.S. Patent Number D395,909.
① Select one model based on the maximum exact distance you need the projector to descend from “store” position to
“service” position.
Scissor Lift—SLX Series
Quantity
Model
Table A
Closed Extended
Height
Height
10 ft.—Model SLX10
SLX10
141/16"
10'7"
14 ft.—Model SLX14
SLX14
165/16"
14'2"
17 ft.—Model SLX17
SLX17
9
18 /16"
17'8"
21 ft.—Model SLX21
SLX21
2013/16"
21'3"
24 ft.—Model SLX24
SLX24
231/16"
24'9"
SLX28
5
25 /16"
28'5"
SLX32
9
32'1"
28 ft.—Model SLX28
32 ft.—Model SLX32
27 /16"
385/16"
363/16"
For drawings/dims
with Environmental Air
Space Housing, see
page 3.
359/16"
3711/16"
Top View
② Standard, factory set “show” position is 36" below “store”
position. “Show” position can be adjusted after installation.
For “show” position of more or less than 36", list show
position:
See
Table
A
1
/8"
35"
36¼"
3911/16"
42"
15/8"
Front View
DRAPER SALESPERSON:
(Continued on Page 2)
CUSTOMER CONTACT:
DEALER NAME:
SIGNATURE:
®
PROJECT NAME:
P.O. #:
Copyright © 2011 Draper Inc. Form ScissorLiftSLX_Sub-PlanSheet11
Printed in U.S.A.
DATE:
357/16"
371/16"
42"
Side View
Scissor Lift Submittal & Planning Sheet for SLX Series
page 2 of 4
③ Select Optional Accessories
Optional Ceiling Access Door (2 x 2) to allow access above finished ceiling (highly recommended)
White Painted Finish
Accepts Ceiling Tile
Optional Environmental Air Space Housing: optional ceiling closure panel not included.
B) If you selected the Environmental Air Space Housing option please provide the following information:
Projector Size H x W x L:
Bracket height:
Available space above ceiling:
Optional ceiling closure panel.
Optional ceiling finish kit: consists of ceiling closure panel and mating trim kit to finish ceiling opening.
Optional Universal Projector Mount (max. load 26 lbs.).
④ Select factory installed hookup for RGB, Video and Projector Control?
Yes
No
What type of connectors do you need on Inputs (to Projector)?
BNC
How Many?
15 Pin HD
How Many?
RCA
How Many?
S-Video
How Many?
RS232 (DB9) How Many?
Cat 5
How Many?
Cat 6
How Many?
What type of connectors do you need on Outputs (up at top of Lift)?
BNC
How Many?
15 Pin HD
How Many?
RCA
How Many?
S-Video
How Many?
RS232 (DB9) How Many?
Cat 5
How Many?
Cat 6
How Many?
⑤ Select Voltage:
110-120V
220-230V
⑥ Select Controls: This unit comes with one 3-Button Wall Switch and one Momentary Key Control. For other switching
options, please select from below:
Replace 3-Button Wall Switch with optional second Momentary Key Control (SP-KSM)
Optional Key Operated Power Supply Key Switch (On-off)
Optional Wireless Remote Control (radio frequency transmitter & receiver) (Controls the "Show" position only)
Optional Wireless Remote Control (infrared transmitter & receiver) (Controls the "Show" position only)
Optional R2D7 RS232 interface for Serial Communication (Controls the "Show" position only)
⑦ Will this unit be controlled by other equipment?
No.
Yes. What kind of equipment?
Optional Ceiling Closure
8
2
9
3
7
Item Qty
①
1
②
1
③
2
④
4
⑤
8
4
6
7
5
Part Number
C028.546
C044.181.07SA
C002.845.07SA
C077.035.49
C013.050
⑥
8
C020.082
⑦
⑧
⑨
16
4
4
C018.027
C020.322
C018.045
Description
Frame, SLX Closure Trim
Panel, SLX Assembled Closure
Bracket, SLX Closure
Rod 3/8"-16 x 177/8" L Threaded , Zinc
Washer .375 I.D. x .875" O.D.
x .064" TK GRD 2 Zinc Flat
Screw, 10-16 X ½" 6 Lobe
Truss Head AB E-White
Nut, 3/8"-16 Hex GRD 2 NSF
Screw, 5/16"-18 x ¾" Long Grade 5 HH Zinc
Nut, 5/16"-18 Zinc Hex KEPS
1
SLX Scissor Lift—Dimensions & Data
SLX10
SLX14
SLX17
SLX21
SLX24
SLX28
SLX32
Height of lift in closed position1 141/16" (36 cm) 165/16" (41 cm) 189/16" (47 cm)
2013/16" (53 cm)
231/16" (59 cm)
255/16" (64 cm) 279/16" (70 cm)
Max. down travel
10'7" (323 cm) 14'2" (432 cm) 17'8" (538 cm)
21'3" (648 cm)
24'9" (754 cm)
28'5" (866 cm) 32'1" (978 cm)
(to service position)
Net weight—lbs.
216
230
260
275
289
303
318
Approx. travel time2
1 min. 43 sec.
2 min. 24 sec. 2 min. 55 sec.
3 min. 36 sec.
4 min. 7 sec.
4 min. 48 sec. 5 min. 30 sec.
(to service position)
1
Height of Scissor Lift in closed position only. Overall height of projector, plus optional mount, plus optional ceiling closure, plus optional Environmental Air
Space Housing adds to overall height of equipment installed above ceiling.
2
Up direction with full load of 350 lbs. "Down" travel time or lighter loads will have shorter travel times.
DRAPER SALESPERSON:
CUSTOMER CONTACT:
www.draperinc.com
(765) 987-7999 SIGNATURE:
Scissor Lift Submittal & Planning Sheet for SLX Series
page 3 of 4
Optional Environmental Air Space Housing
11
11
11
7
11
11
11
1
11
Sid
e
3
3
11
8
5
5
Front/Back
4
3
9
Do not use
electrical knockouts
on bottom sections
6
4
10
2
9
3
Item
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
41¾"
Qty Part Number
Description
1 C028.544.02SA
Frame, SLX Plenum
1 C028.545.07SA
Frame, SLX Trim Ring
4 C044.178SA
Panel, SLX Plenum Side
4 C044.180SA
Panel, SLX Plenum End
2 C044.179SA
Panel, SLX Middle End
2 C044.177SA Panel, SLX Plenum Middle Side
1 C095.123SA
Cover, SLX Plenum
28
C020.325
Screw, 8-32 x 3/8" Type 1 HWH
40
C018.051
Nut #8-32 Zinc Hex KEPS
12
C013.070
Washer, .188 I.D. x .5 O.D. x
.07" TK Nylon Flat
24
C020.112
Screw, 8-32 x 3/8" Type F HWH
41½"
20¾"
5"
48½"-22½"
19"
Front/Back View
Side View
DRAPER SALESPERSON:
CUSTOMER CONTACT:
www.draperinc.com
(765) 987-7999 SIGNATURE:
Scissor Lift Submittal & Planning Sheet for SLX Series
page 4 of 4
Wiring Diagram
RD
Up Limit Switch
BK
BK
RD
BN
WH
YL
BK
YL/GN
BN
BL
Down Limit Switch
BL WH
WH
WH
RD
RD
WH
125V 10A Outlet
Motor
GN
BK
BK
Show Limit Switch
WH
RD
Dashed wiring by electrician
WH
RD
N
110 - 120 Vac Supply
Low voltage wiring by others
Key Switch
Wall Switch
Low Voltage Trigger (6 - 24 VDC)
RP/RQ Bus Ports for remote controls such as
Eye Port for IR Eye, RF Receiver, LED Wall Switch
and RS232.
Controls plug into the data cable inputs on the Control Panel,
which is located on the Top Frame on the front side of the lift,
using RJ14 connectors.
For IR or RF Remote Control, use data cable with RJ14
connectors on both ends.
Pin
123456
YGRB
For serial control of "Show" position, use data cable with RJ14
connectors on both ends and an R2D7 Serial Control Interface.
Plug into the "RP/RQ" input.
LVT
RP/RQ
RP/RQ
Connecting Controls
WALL
KEY
Function Indicator
Low Voltage Trigger
(6-24 VDC)
Pin
123456
YGRB
RP/RQ Bus Ports for
remote controls such as
IR Eye, RF Receiver, LED
Wall Switch and RS232
LVC-S
KS-3
Red - Down
Black - Com
Black - Com
Blue - Up
Pin
123456
YGRB
Green
Black
DCU
Yellow
Green
Black
Yellow
Please Note:
Data cable connections must be made
using electrically straight 4-conductor
modular cable (RJ14). If making your own
cables, this means colors do not cross
over: blue leads to blue, green to green,
etc. (see diagram below).
Pin
123456
YGRB
Pin
654321
B R GY
Pin
123456
YGRB
To RS232 Port:
Yellow = Rx (Data from control system)
Green = Tx (Data to control system)
Red = Unused
Black = Gnd (Signal Ground)
DRAPER SALESPERSON:
CUSTOMER CONTACT:
SIGNATURE:
www.draperinc.com
(765) 987-7999
Download PDF