Casio | EX-Z3000 | User`s guide | Casio EX-Z3000 User`s guide

E
Digital Camera
User’s Guide
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM
Website at http://www.exilim.com/
To go to “Getting the Most Out of Dynamic Photo” click here!
Unpacking
As you unpack your camera, check to make sure that all items shown below are
included. If anything is missing, contact your original retailer.
Digital camera
Rechargeable lithium ion
battery (NP-110)
USB-AC adaptor
(AD-C53U)
To attach the strap to the camera
Attach strap here.
* The shape of the power
cord plug varies
according to country or
geographic area.
1
2
Power cord
USB cable
Strap
AV cable
CD-ROM
2
Basic Reference
Read this first!
• The contents of this manual are subject to change without notice.
• The contents of this manual have been checked at each step of the production
process. Feel free to contact us if you notice anything that is questionable,
erroneous, etc.
• Any copying of the contents of this User’s Guide, either in part or its entirety, is
forbidden. Except for your own personal use, any other use of the contents of this
manual without the permission of CASIO COMPUTER CO., LTD. is forbidden
under copyright laws.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits suffered by you or any third party due to the use or malfunction of this
product.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages, lost
profits, or claims by third parties arising out of the use of Photo Transport, Dynamic
Photo Manager, Virtual Painter 5 LE for CASIO, or YouTube Uploader for CASIO.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits caused by loss of memory contents due to malfunction, repair, or any other
reason.
• Note that the example screens and product illustrations shown in this User’s Guide
may differ somewhat from the screens and configuration of the actual camera.
LCD Panel
The liquid crystal panel of the monitor screen uses high-precision technology that
provides a pixel yield in excess of 99.99%. This means that some very small number
of pixels may not light or may remain lit at all times. This is due to the characteristics
of the liquid crystal panel, and does not indicate malfunction.
Take test shots
Before shooting your final image, shoot a test shot to ensure that the camera is
recording correctly.
3
Contents
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Monitor Screen Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
...
...
...
...
❚❙ Quick Start Basics
2
3
8
9
11
What is a digital camera? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
What you can do with your CASIO camera . . . . . . . . . . . . . . . . . . . . . . . .
Using the Touch Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
First, charge the battery prior to use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
..
..
..
..
11
12
13
15
❚ To load the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
❚ Charge the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Configuring Basic Settings the First Time You Turn On the Camera. . . . . . . 21
Preparing a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
❚ Supported Memory Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
❚ To load a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
❚ To format (initialize) a new memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Turning Power On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Holding the Camera Correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
To Shoot a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
❚ Selecting an Auto Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
❚ To shoot a snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Deleting Snapshots and Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
❚ To delete a single file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
❚ To delete all files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Snapshot Shooting Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
❚ Auto Focus Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
❚❙ Recording Images
35
Selecting a Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
❚ Digitally Correcting for Overexposure and Underexposure . . . . . . . . (HDR) . . . 37
❚ Shooting Snapshots Digitally Processed for Artistic Effect . . . . . (HDR Art) . . . 38
❚ Shooting a Panorama Image . . . . . . . . . . . . . . . . . . . . . . (Slide Panorama) . . . 39
Using Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Flash) . . 42
Shooting with Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
❚ Interpreting the Zoom Bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
❚ Zooming with Super Resolution . . . . . . . . . . . . . . . . . . . .(Single SR Zoom) . . . 46
To record a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
❚❙ Using BEST SHOT
49
4
Contents
❚❙ Advanced Recording Settings
50
Using the REC Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
❚
❚
❚
❚
❚
❚
❚
❚
❚
❚
❚
❚
❚
❚
❚
Using Touch Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Touch Shutter) . . .
Shooting Snapshots of better Texture and Sharpness . .(Single SR Quality) . . .
Zooming with Super Resolution . . . . . . . . . . . . . . . . . . . .(Single SR Zoom) . . .
Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Self-timer) . . .
Changing the Image Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Image Size) . . .
Movie Image Quality Settings . . . . . . . . . . . . . . . . . . . . . . . (Movie Quality) . . .
Correcting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . (EV Shift) . . .
Adjusting White Balance . . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance) . . .
Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(ISO) . . .
Optimizing Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Lighting) . . .
Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Focus) . . .
Shooting with Continuous Auto Focus . . . . . . . . . . . . . . . . (Continuous AF) . . .
Using the Auto Focus Assist Light . . . . . . . . . . . . . . . . . . .(AF Assist Light) . . .
Reducing the Effects of Camera and Subject Movement . . . . (Anti Shake) . . .
Turning on Image Review . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Review) . . .
❚❙ Viewing Snapshots and Movies
51
51
52
52
53
54
55
56
57
57
58
60
60
61
61
62
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Viewing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
❚ Editing a Movie on the Camera . . . . . . . . . . . . . . . . . . . . . . (Movie Editing) . . . 64
Viewing a Panorama Image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing a Slideshow on the Camera . . . . . . . . . . . . . . . . . . . . (Slideshow)
Viewing the Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Zooming an On-screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing Snapshots and Movies on a TV Screen . . . . . . . . . . . . . . . . . . . .
❚❙ Other Playback Functions
(PLAY)
..
..
..
..
..
65
66
66
67
68
70
Using the PLAY Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
❚
❚
❚
❚
❚
❚
❚
Protecting a File Against Deletion . . . . . . . . . . . . . . . . . . . . . . . . . (Protect) . . .
Copying Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Copy) . . .
Using Red Eye Correction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Red Eye) . . .
Cropping a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Trimming) . . .
Resizing a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Resize) . . .
Rotating an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Rotation) . . .
Selecting Images for Printing . . . . . . . . . . . . . . . . . . . . . . . (DPOF Printing) . . .
❚❙ Dynamic Photo
71
72
72
73
74
74
75
76
Inserting a Built-in Subject into a Snapshot or Movie . . . (Dynamic Photo) . . 76
❚ To view a Dynamic Photo . . . . . . . . . . . . . . . . . . . . . . (Dynamic Photo File) . . . 78
Converting a Dynamic Photo Still Image to a Movie . . . (Movie Converter) . . 78
5
Contents
❚❙ Printing
79
Printing Snapshots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Using DPOF to Specify Images to be Printed and the Number of Copies. . . 80
❚❙ Using the Camera with a Computer
83
Things you can do using a computer... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Using the Camera with a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . . 84
Viewing and Storing Images on a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Uploading Movie Files to YouTube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transferring Images from Your Computer to Camera Memory. . . . . . . . . . . . . .
Play back Dynamic Photo images on your EXILIM, a computer,
or on a mobile phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
❚ Transforming Snapshots into Artistic Image . . . . . . . . . . . . . . . . . . . . . . . . . . . .
❚ Viewing User Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . (PDF Files) . . .
❚ User Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
❚
❚
❚
❚
❚
85
88
89
90
92
92
94
94
Using the Camera with a Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
❚
❚
❚
❚
❚
Connecting the Camera to Your Computer and Saving Files . . . . . . . . . . . . . . .
Transferring Images Automatically and Managing Them on Your Macintosh. . .
Playing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing User Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . (PDF Files) . . .
User Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
95
97
98
99
99
Using an Eye-Fi Wireless SD Memory Card to Transfer Images . (Eye-Fi) . . 99
Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Memory Card Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
❚❙ Other Settings
(Set Up) 103
Adjusting Monitor Screen Brightness . . . . . . . . . . . . . . . . . . . . . (Screen)
Turning off Eye-Fi Card Communication . . . . . . . . . . . . . . . . . . . . (Eye-Fi)
Configuring Camera Sound Settings . . . . . . . . . . . . . . . . . . . . . (Sounds)
Time Stamping Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . (Timestamp)
Configuring World Time Settings . . . . . . . . . . . . . . . . . . . . . (World Time)
.
.
.
.
.
103
103
104
104
105
❚ Setting a Travel Destination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
❚ Selecting the Time Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Setting the Camera’s Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Adjust)
Specifying the Date Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Date Style)
Specifying the Display Language . . . . . . . . . . . . . . . . . . . . . . (Language)
Calibrating the Touch Panel . . . . . . . . . . . . . . . . . . . . . . . . (Calibrate TP)
Selecting the Screen Aspect Ratio and Video Output System (Video Out)
Formatting Built-in Memory or a Memory Card . . . . . . . . . . . . . . (Format)
Resetting the Camera to Factory Defaults . . . . . . . . . . . . . . . . . . (Reset)
❚❙ Configuring Monitor Screen Settings
.
.
.
.
.
.
.
106
107
107
108
108
109
109
110
Selecting Display Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (DISP) . 110
6
Contents
❚❙ Appendix
111
Precautions during Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
❚
❚
❚
❚
Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
To replace the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Battery Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Camera in another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
119
120
120
121
Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
❚ To replace the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Computer System Requirements for Bundled Software (For Windows) . . . 123
Reset Initial Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
When things don’t go right... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
❚ Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
❚ Display Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Number of Snapshots/Movie Recording Time . . . . . . . . . . . . . . . . . . . . . . . 133
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
7
Contents
General Guide
The numbers in parentheses indicate the pages where each item is explained.
Front
Back
1 2 34
6
5
1 Zoom controller
(pages 29, 44, 66, 67)
2 Shutter button (page 29)
3 Flash (page 42)
4 Front lamp
(pages 27, 52, 60)
5 Lens
6 Microphone (page 48)
7 8 9
bn
7 [p] (PLAY) button
(pages 25, 32)
8 Back lamp
(pages 17, 19, 25, 29,
42)
9 [ON/OFF] (Power)
(pages 16, 21, 25)
bkConnector cover
bk
bm bl
bl[USB/AV] port
(pages 17, 18, 68, 85,
96)
bmStrap hole (page 2)
bnMonitor screen
(pages 9, 110)
Bottom
boBattery/memory card slots (pages 15, 23, 120, 121)
bpTripod hole
Use this hole when attaching to a tripod.
bqSpeaker
bq bp
bo
8
Monitor Screen Contents
The monitor screen uses various indicators, icons, and values to keep you informed
of the camera’s status.
• The sample screens in this section are intended to show you the locations of all the
indicators and figures that can appear on the monitor screen in various modes.
They do not represent screens that actually appear on the camera.
. Snapshot Recording
1 2 3 4 567
bq
bp
bo
bn
bm
1Tab (page 25)
2Focus mode (page 58)
8 3Self-timer mode (page 52)
9 4Flash (page 42)
5Snapshot image size (page 53)
6Movie quality (pages 47, 54)
7Digital zoom / Single SR Zoom (page 45)
bk 8Remaining snapshot memory capacity
(page 133)
bl
9Remaining movie memory capacity
(pages 47, 133)
bk“b” Movie icon (pages 30, 47)
blBattery level indicator (page 20)
bmPLAY mode icon (page 26)
bnInformation icon (page 110)
boFlash icon (page 42)
bpRecording mode icon (pages 28, 36)
bqMenu icon (page 50)
. Movie Recording
1
2 34
5
1Movie quality (pages 47, 54)
2Recording time switch icon (page 47)
3Movie remaining time icon (page 47)
4Remaining movie memory capacity/
Movie recording time (pages 47, 133)
5Digital zoom / Single SR Zoom (page 45)
6“c” Movie stop icon (pages 30, 47)
6
B
9
. Snapshot Viewing
1
2 3 4
bn
bm
bl
bk
9
8
7
1Tab (page 25)
2Protect indicator (page 71)
5 3Folder name/file name (page 101)
4Snapshot image size (page 53)
5Image menu icon (page 66)
6Image scroll icons (pages 32, 62)
7Battery level indicator (page 20)
6 8Date/time (pages 21, 106)
9REC mode icon (page 26)
bkInformation icon (page 110)
blDelete icon (page 33)
bmSlideshow icon (page 66)
bnMenu icon (page 70)
. Movie Playback
1
bk
B
2 3 4
9
8
1Tab (page 25)
2Protect indicator (page 71)
5 3Folder name/file name (page 101)
6 4Movie quality (pages 47, 54)
5Image menu icon (page 66)
6Movie recording time (page 62)
7Image scroll icons (pages 32, 62)
7 8Battery level indicator (page 20)
9Date/time (pages 21, 106)
bk“6” Movie play icon (page 62)
10
Quick Start Basics
What is a digital camera?
A digital camera stores images on a memory card, so you can record and
delete images a countless number of times.
Record
Delete
Play
You can use the images you record in a variety of different ways.
Store images on your
computer.
Print images.
11
Attach images to e-mail.
Quick Start Basics
What you can do with your CASIO camera
Your CASIO camera is packed with a powerful selection of features and functions to
make recording of digital images easier, including the following three main functions.
Simple touch panel operation
The monitor screen is a touch panel that can be
used to perform operations.
See page 13 for more information.
Premium Auto
Select Premium Auto recording and the
camera automatically determines whether
you are shooting a subject or scenery, and
other conditions. Premium Auto delivers
higher image quality than standard Auto.
See page 28 for more information.
HDR Art
An HDR Art feature combines different parts of a
burst of images shot with different exposures into a
final image and performs high-precision image
analysis to produce final images that are true works
of art.
See page 38 for more information.
12
Quick Start Basics
Using the Touch Panel
The monitor screen of the camera is a touch panel. This means you can perform the
following operations by touching the screen with your fingers.
Touch
Momentarily touching the screen with your finger.
Touch the screen to select an icon or menu item, and
to configure settings.
Touch-and-hold
Holding your finger against the screen.
Touch and hold the screen to scroll images at high
speed, or to perform continual frame-by-frame
playback of a movie.
Drag
Holding your finger against the screen as you drag it
up, down, left, or right.
Use drag to move a screen image to a different
location, and to scroll between images.
Spread
Holding your thumb and forefinger against the screen
as you spread them out.
Use spread to enlarge the screen image.
13
Quick Start Basics
Squeeze
Holding your thumb and forefinger against the screen
as you bring them together.
Use squeeze to reduce the size of the screen image.
IMPORTANT!
• Never use a pointed or hard object to perform screen operations. Doing so can
damage the screen.
• The touch panel is pressure-sensitive. Make sure you touch the panel with
sufficient pressure when operating it.
NOTE
• Applying a commercially available LCD protective sheet will reduce the operation
sensitivity of the monitor screen.
• If touch panel item selections are not performed as expected, calibrate the touch
panel (page 108).
14
Quick Start Basics
First, charge the battery prior to use.
Note that the battery of a newly purchased camera is not charged. Perform the steps
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-110)
for power. Never try to use any other type of battery.
To load the battery
1.
Open the battery cover.
Slide the battery cover slider towards OPEN
and then open it as indicated by the arrows
in the illustration.
2.
Load the battery.
With the EXILIM logo on the
battery facing downwards (in
the direction of the lens), hold
the stopper next to the battery
in the direction indicated by
the arrow as you slide the
battery into the camera. Press
the battery in until the stopper
secures it in place.
Stopper
Battery contacts
EXILIM logo
Front
3.
Back
Close the battery cover.
Close the battery cover and then shift the
slider towards LOCK.
• For information about how to replace the
battery, see page 120.
15
Quick Start Basics
Charge the Battery
You can use either of the two following methods to charge the camera’s battery.
• USB-AC adaptor
• USB connection to a computer
. To charge with the USB-AC adaptor
1.
Turn off the camera.
[ON/OFF] (Power)
Check to make sure that the camera’s monitor screen
is blank. If it isn’t, press [ON/OFF] (Power) to turn off
the camera.
2.
After connecting the
supplied USB cable
to the USB-AC
adaptor, plug the
adaptor into a
household power
outlet.
USB cable (included with camera)
USB
USB port
Power cord
USB-AC adaptor
16
Quick Start Basics
3.
Connect the USB
cable to the camera.
USB-AC adaptor
The back lamp should
light red, indicating that
charging has started.
The back lamp will go
out when charging is
complete.
USB cable
It takes about
(included with camera)
190 minutes to bring a
fully dead battery to a
[USB/AV] port
full charge.
• A battery that has not
been used for a long
Small connector
time, or ambient
temperature
Making sure that the 6 mark on the camera is aligned
extremes can cause
with the 4 mark of the USB cable connector, connect
charging to take
the cable to the camera.
longer than normal. If
charging takes longer
than about six hours, a timer will terminate it automatically, even if the battery is
not fully charged. This is indicated by the back lamp flashing red. If the battery
has not been used for a very long time, charging may be terminated
automatically and the back lamp may start flashing red after only about 45
minutes. In either case, disconnect the USB cable from the camera and then
reconnect it to resume charging.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
Back Lamp Operation
Lamp Status
Description
Lit Red
Charging
Flashing Red
Abnormal ambient temperature,
USB-AC adaptor problem,
battery problem, or charging
terminated by timer (page 119)
Off
Charging complete
17
Back lamp
Quick Start Basics
4.
After charging is complete, disconnect the USB cable from the camera
and then unplug the adaptor from the power outlet.
. To charge using a USB connection to a computer
The battery loaded in the camera is charged whenever the camera is connected
directly to a computer with the USB cable.
• Depending on the setup of your computer, you may not be able to charge the
camera’s battery over a USB connection. If this happens, use of the USB-AC
adaptor that comes with the camera is recommended.
IMPORTANT!
• The first time you connect the camera to your computer with the USB cable, an
error message may appear on your computer. If this happens, disconnect and then
reconnect the USB cable.
1.
Press [ON/OFF] (Power) to turn off the camera.
2.
With your computer
turned on, connect the
camera to it.
USB port
USB cable
(included with camera)
The camera’s back lamp will
Large connector
light red. After a short while,
the camera will turn on
automatically and the back
lamp will light amber to
indicate that charging has
started. The back lamp will
[USB/AV]
light green when charging is
port
Small connector
complete. Note, however,
that some computer models
or connection conditions
can produce low supply
Making sure that the 6 mark on the camera is
capacity. If low supply
aligned with the 4 mark of the USB cable
capacity exists, charging will
connector, connect the cable to the camera.
start without the camera
turning on. This is indicated by the back lamp lighting red. The back lamp will go
out in this case after charging is complete.
• It takes about 260 minutes to bring a fully dead battery to a full charge.
B
18
Quick Start Basics
• A battery that has not been used for a long time, certain types of computers,
and connection conditions can cause charging to take longer than normal. If
charging takes longer than about six hours, a timer will terminate it
automatically, even if the battery is not fully charged. If the battery has not been
used for a very long time, charging may terminate automatically and the back
lamp may start flashing red or go out after only about 30 minutes to 45 minutes.
In either case, use of the USB-AC adaptor that comes with the camera is
recommended.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
Back Lamp Operation
Lamp Status
3.
Description
Lit Amber
Charging
Lit Red
Charging in progress (Data
transfer with computer not
supported.)
Flashing Red
Abnormal ambient temperature,
battery problem, or charging
terminated by timer (page 119)
Lit Green
Charging complete, or charging
stopped
Back lamp
After charging is complete, disconnect the USB cable from the camera
and then from the computer.
NOTE
• Charging continues while a camera is connected to a computer’s USB port, even if
the camera is turned off. Under this condition, the back lamp operates as described
under “Back Lamp Operation” (page 17).
19
Quick Start Basics
IMPORTANT!
• Charging is not performed while the connected computer is in the hibernate mode.
• A charging error can occur immediately after charging begins or some time after
charging begins. A charging error is indicated by the back lamp flashing red.
• If low supply capacity exists due to your computer model or connection conditions,
charging will start without the camera turning on. Turning on the camera in this
case will cause charging to stop and enter USB data communication between the
camera and the computer. The camera’s back lamp will be lit green at this time.
Other Charging Precautions
• With the two charging methods described above, you can charge the camera’s
battery (NP-110) without removing it from the camera. You also can charge the
battery using an optionally available charger unit (BC-110L). Never use any other
type of charger device. Attempting to use a different charger can result in
unexpected accident.
• A battery that is still warm immediately after normal use may not charge fully. Give
the battery time to cool before charging it.
• A battery discharges slightly even when it is not loaded in the camera. Because of
this, it is recommended that you charge the battery immediately before you need to
use it.
• Charging the camera’s battery may cause interference with TV and radio reception.
If this happens, plug the USB-AC adaptor into an outlet that is further away from
the TV or radio.
• Actual charging time depends on current battery capacity and charging conditions.
• Do not use the USB-AC adaptor with any other device.
Checking Remaining Battery Power
As battery power is consumed, a battery indicator on the monitor screen indicates
remaining power as shown below.
Remaining Power
High
Battery Indicator
Indicator Color
Cyan
Low
*
*
* Yellow
*
*
Red
*
Red
indicates battery power is low. Charge the battery as soon as possible.
Recording is not possible when
is indicated. Charge the battery immediately.
• The level shown by the battery indicator may change when you switch between the
REC mode and PLAY mode.
• Leaving the camera for about 30 days with no power supplied while the battery is
dead will cause its date and time settings to be cleared. A message telling you to
configure time and date settings will appear the next time you turn on the camera
after restoring power. When this happens, configure date and time settings (page
106).
• See page 136 for information about battery life and number of shots.
20
Quick Start Basics
Battery Power Conservation Tips
• When you do not need to use the flash, select ? (Flash Off) for the flash setting
(page 42).
• Select “Off” for “Continuous AF” (page 60).
Configuring Basic Settings the First Time You Turn On the
Camera
The first time you turn on the camera, a screen appears for configuring the display
language, date, and time settings. Failure to set the date and time correctly will cause
the wrong date and time data to be recorded with images.
IMPORTANT!
• A screen for language selection will not appear in step 2 of the procedure below if
you purchased a camera intended for the Japanese market. To change the display
language from Japanese in this case, use the procedure under “Specifying the
Display Language (Language)” (page 107). Note that a version of this manual in
the language you select may not be included with a camera intended for the
Japanese market.
• Camera models sold in certain geographic areas may not support display language
selection.
1.
Press [ON/OFF] (Power) to turn on the
camera.
2.
Drag (page 13) upwards and downwards
until you find the language you want, and
then touch to select it.
3.
Touch the date display format you want.
[ON/OFF] (Power)
Example: July 10, 2012
YY/MM/DD * 12/7/10
DD/MM/YY * 10/7/12
MM/DD/YY * 7/10/12
21
Quick Start Basics
4.
Touch the value you want to change (year,
month, day, hour, minute).
5.
Touch “8” or “2” to change the currently
selected value.
• Touching and holding “8” or “2” will change the
setting at high speed.
• To switch between 12-hour and 24-hour format,
touch the 12/24 hour switch icon.
12/24 hour switch icon
6.
When the date and time settings are the way you want, touch “OK”.
7.
Touch “Auto” or “Premium Auto” to select the default auto recording
mode you want.
8.
Touch “Apply”.
• You will be able to change this setting later, if you want. See page 28 for
details.
If you make a mistake configuring display language, date, or time settings with the
above procedure, refer to the following pages for information about how to correct
the settings.
– Display language: Page 107
– Date and time: Page 106
NOTE
• Each country controls its local time offset and the use of summer time, and so they
are subject to change.
• Removing the battery from the camera too soon after configuring time and date
settings for the first time can cause the settings to be reset to their factory defaults.
Do not remove the battery for at least 24 hours after configuring settings.
B
22
Quick Start Basics
Preparing a Memory Card
Though the camera has built-in memory that can be used to store images and
movies, you probably will want to purchase a commercially available memory card for
greater capacity. The camera does not come with a memory card. Images recorded
while a memory card is loaded are saved to the memory card. When no memory card
is loaded, images are saved to built-in memory.
• For information about memory card capacities, see page 133.
Supported Memory Cards
– SD Memory Card (Up to 2GB)
– SDHC Memory Card (2GB to 32GB)
– SDXC Memory Card (32GB to 2TB)
Use one of the above types of memory card.
• The above are supported memory card types as of March 2011.
• Noted memory card capacities are standard values.
• Use only SD cards that are compliant with the SD Card Association specification.
• This camera supports use of Eye-Fi cards.
To load a memory card
1.
Press [ON/OFF] (Power) to turn off the
camera and then open the battery
cover.
Slide the battery cover slider towards OPEN
and then open it as indicated by the arrows
in the illustration.
2.
Load a memory card.
Positioning the memory card so its front
is facing upwards (towards the monitor
screen side of the camera), slide it into
the card slot all the way in until you
hear it click securely into place.
Front
Front
23
Back
Quick Start Basics
3.
Close the battery cover.
Close the battery cover and then shift the
slider towards LOCK.
• For information about how to replace the
memory card, see page 121.
IMPORTANT!
• Never insert anything besides a supported memory card (page 23) into the memory
card slot.
• Should water or any foreign object ever get into the card slot, immediately turn off
the camera, remove the battery, and contact your retailer or nearest CASIO
authorized service center.
To format (initialize) a new memory card
You need to format a new memory card before using it for the first time.
1.
Load a memory card (page 23).
2.
Turn on the camera and then touch “MENU”.
• If “MENU” is not displayed on the screen, touch the tab to display it (page 35).
3.
Drag (page 13) upwards and downwards until you find “Setup”, and
then touch it.
4.
Drag upwards and downwards until you find “Format”, and then touch
it.
5.
Touch “Format” and then touch “Yes”.
This starts the memory card format operation.
B
24
Quick Start Basics
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use the camera to format a memory card. Formatting a memory card on
a computer and then using it in the camera can slow down data processing by the
camera. In the case of an SD, SDHC, or SDXC memory card, formatting on a
computer can result in non-conformity with the SD format, causing problems with
compatibility, operation, etc.
• Before formatting a new Eye-Fi card to use it for the first time, copy the Eye-Fi
Manager install files to your computer. Do this before formatting the card.
• Before formatting an Eye-Fi card, be sure to back up any data on it that you want to
keep.
Turning Power On and Off
. To turn on the camera
Tab
[p] (PLAY)
[ON/OFF] (Power)
Back lamp
“f” (PLAY) / “g” (REC)
To turn on power
and enter the REC
mode
Press [ON/OFF] (Power).
• The back lamp will light green momentarily and the lens will
extend out of the camera (page 29).
To turn on power
and enter the
PLAY mode
Press [p] (PLAY).
• The back lamp will light green momentarily and an image
currently stored in camera memory will appear on the monitor
screen (page 32).
• Take care to ensure that nothing is restricting or coming into contact with the lens
as it extends. Holding the lens with your hand so it cannot extend creates the risk
of malfunction.
25
Quick Start Basics
Entering the REC Mode and PLAY Mode
To enter the
PLAY mode
In the REC mode, press [p] (PLAY), or touch the tab and
then touch the “f” (PLAY) icon that appears.
To enter the REC
mode
In the PLAY mode, press [p] (PLAY), or touch the tab and
then touch the “g” (REC) icon that appears.
• About 10 seconds after you enter the PLAY mode from the REC mode, the lens will
retract into the camera.
. To turn off the camera
Press [ON/OFF] (Power).
. Battery Power Conservation (Auto Power Off)
To conserve battery power, an Auto Power Off function turns off the camera if you do
not perform any operation for about three minutes in the REC mode or for about five
minutes in the PLAY mode.
• Auto Power Off is disabled under any of the following conditions.
– While the camera is connected to a computer or other device
– During a slideshow
– During movie recording and playback
26
Quick Start Basics
Holding the Camera Correctly
Your images will not come out clearly if you move the camera when you press the
shutter button. When pressing the shutter button, be sure to hold the camera as
shown in the illustration below, and keep it still by pressing your arms firmly against
your sides as you shoot.
Holding the camera still, carefully press the shutter button and take care to avoid all
movement as the shutter releases and for a few moments after it releases. This is
especially important when available lighting is low, which slows down the shutter
speed.
Horizontal
Vertical
Hold the camera so the flash is
above the lens.
NOTE
• Take care that your fingers and the strap do not
cover any of the areas indicated in the illustration.
• To protect against accidentally dropping the
camera, attach the wrist strap and make sure it is
around your fingers or wrist while you are operating
the camera.
• Never swing the camera around by its strap.
• The supplied strap is intended for use with this
camera only. Never use it for any other purpose.
Flash
Front lamp
Lens
IMPORTANT!
• Take care to ensure that your fingers are not blocking or
are not too close to the flash. Fingers can cause unwanted
shadows when using the flash.
27
Quick Start Basics
To Shoot a Snapshot
Your camera has a variety of different recording modes to suit various shooting
conditions and objectives (page 36). This section explains general shooting
procedures using the auto recording mode.
Selecting an Auto Recording Mode
You can select one of two auto recording modes (Auto or Premium Auto) according to
your digital imaging needs.
R Auto
This is the standard Auto recording mode.
• It provides faster operation than Premium Auto recording.
With Premium Auto recording, the camera automatically
determines whether you are shooting a subject or scenery,
and other conditions. Premium Auto recording delivers higher
Ÿ Premium Auto image quality than standard Auto recording.
• Premium Auto recording takes longer to process image data
after it is shot than Auto recording.
• It also requires more power (and runs down the battery
quicker) than Auto.
1.
Press [ON/OFF] (Power) to turn on the camera.
2.
Touch the second icon from the top
(Recording mode).
If the icon is not displayed on the screen, touch
the tab to display it.
Recording mode icon
3.
Touch “Auto” or “Premium Auto” to select
the auto recording mode you want.
28
Quick Start Basics
To shoot a snapshot
1.
Point the camera at the subject.
If you are using Premium Auto, text will appear in the
lower right corner of the monitor screen describing
the type of shot the camera has detected.
• You can zoom the image, if you want.
Type of shot
w Wide Angle
2.
z Telephoto
Zoom controller
Half-press the shutter
button to focus the
image.
When focus is complete,
the camera will beep, the
back lamp will light green,
and the focus frame will turn
green.
Shutter button
Back lamp
Focus frame
Half-press
Press lightly
until the button
stops.
Beep, beep (Image is in focus.)
When you half-press the shutter button, the
camera automatically adjusts exposure and
focuses on the subject it is currently pointed
at. Mastering how much pressure is required
for a half-press and a full-press of the shutter
button is an important technique for goodlooking images.
29
Quick Start Basics
3.
Continuing to keep the camera still,
press the shutter button the rest of
the way down.
Full-press
This records the snapshot.
Snap (Image is recorded.)
Recording a Movie
Touch “b” (Movie) to start movie recording. Touch
“c” (Movie Stop) to stop recording.
See page 47 for details.
“b” (Movie)/
“c” (Movie Stop)
NOTE
• You also can shoot a snapshot by touching a point on the monitor screen (page
51).
• You can specify the image size for snapshots. See page 53 for more information.
. If the image does not focus...
If the focus frame stays red and the back lamp is flashing green, it means that the
image is not in focus (because the subject is too close, etc.). Re-point the camera at
the subject and try to focus again.
. Shooting with Auto
“Focus lock” (page 59) is the name of a technique you can use when you want to
shoot an image in which the subject to be focused on is not within the focus frame in
the center of the screen.
30
Quick Start Basics
. Shooting with Premium Auto
• In addition to shutter speed, aperture, and ISO sensitivity, the camera
automatically executes the following operation as required when shooting with
Premium Auto.
– Auto Focus is normally performed until you half-press the shutter button.
– The camera automatically determines the focus point on the screen and focuses
there.
– When shooting people, the face detection feature detects the faces of up to ten
individuals and adjusts focus and brightness accordingly.
• Shooting with Premium Auto can cause vibration and noise to occur due to lens
operation. This does not indicate malfunction.
• When shooting with Premium Auto, the message “Processing Premium Auto.
Please wait...” may appear on the monitor screen. If you feel the camera is taking
too long to process data, try shooting with standard Auto instead.
• In some cases, Premium Auto may not be able to interpret the shooting
environment correctly. If this happens, shoot with standard Auto.
31
Quick Start Basics
Viewing Snapshots
Use the following procedure to view snapshots on the camera’s monitor screen.
• For information about how to play back movies, see page 62.
1.
Press [p] (PLAY) or touch “f”
(PLAY) to enter the PLAY mode.
This will display one of the snapshots
currently stored in memory.
• If “f” (PLAY) is not displayed on the
screen, touch the tab to display it.
• Information about the displayed
snapshot also is included (page 10).
• You also can clear the information to
view only the snapshot (page 110).
• You can zoom the screen image by
sliding the zoom controller towards
[z] or by touching the monitor screen
(page 67).
If you are recording a snapshot that is
very important to you, it is
recommended that you zoom the
image and check its details after recording it.
2.
[p] (PLAY)
Tab
“f” (PLAY)
Touch “ú” or “õ”, or drag left or right across the screen image to
scroll through the snapshots.
• To scroll at high speed, touch and hold “ú” or “õ”.
“õ”
“õ”
“ú”
“ú”
NOTE
• Pressing the shutter button while in the PLAY mode or while a menu screen is
displayed will switch directly to the REC mode.
32
Quick Start Basics
Deleting Snapshots and Movies
If memory becomes full, you can delete snapshots and movies you no longer need in
order to free up storage and record more images.
IMPORTANT!
• Remember that a file (image) delete operation cannot be undone.
To delete a single file
1.
In the PLAY mode, touch “ú” or “õ” to display the file you want to
delete.
2.
Touch “t”.
• If “t” is not displayed on the screen, touch the tab
to display it.
3.
Touch “1 File”.
This will delete the selected image.
To delete all files
1.
Enter the PLAY mode.
2.
Touch “t”.
• If “t” is not displayed on the screen, touch the tab to display it.
3.
Touch “All Files”.
4.
Touch “Delete”.
This will cause the message “There are no files” to appear.
33
Quick Start Basics
Snapshot Shooting Precautions
Operation
• Never open the battery cover while the back lamp is flashing green. Doing so can
result in the image you just shot being saved incorrectly, damage to other images
stored in memory, malfunction of the camera, etc.
• If unwanted light is shining directly onto the lens, shade the lens with your hand.
Monitor Screen when Shooting Snapshots
• Subject brightness conditions can cause monitor screen response to slow and can
cause digital noise in the monitor screen image.
• The image that appears on the monitor screen is for image composition. The actual
image will be recorded in accordance with the currently selected recording mode
(page 36).
Shooting Indoors under Fluorescent Lighting
• Minute flickering of fluorescent lighting can affect the brightness or color of an
image.
Auto Focus Restrictions
• Any of the following can make proper focus impossible.
– Solid color wall or other very low contrast subject
– Strongly back lit subject
– Very shiny subject
– Blinds or other subject with a repeating horizontal pattern
– Multiple subjects at varying distances from the camera
– Subject in a dark location
– Subject that is too far away for light from the AF assist lamp to reach
– Camera movement while shooting
– Fast-moving subject
– Subjects outside the focus range of the camera
• If you cannot focus properly, try using focus lock (page 59) or Manual Focus (page
58).
34
Quick Start Basics
Recording Images
Touching the monitor screen in the REC mode will display a screen for configuring
REC mode settings.
. To configure REC mode settings
1.
Press [ON/OFF] (Power) to turn on
the camera and enter the REC mode.
[ON/OFF] (Power)
• If the camera is in the PLAY mode,
touch “g” (REC) to enter the REC
mode.
“g” (REC)
2.
Touch the item whose setting you want to change.
• If there are no icons along the left side of the screen, touch the tab to display
them.
1Tab (page 25)
2Menu (page 50)*
3Recording mode (page 36)
4Flash (page 42)
5Information (page 110)
6PLAY mode (page 26)
7Movie (page 47)
1
2
3
4
5
6
7
* Depending on the recording mode, some of the items on the menu that appears
may not be usable.
35
Recording Images
Selecting a Recording Mode
The camera has a variety of different recording modes.
1.
In the REC mode, touch the second icon from the top (Recording
mode).
• If the icon is not displayed on the screen, touch the tab to display it.
2.
Touch the icon of the recording mode you
want to use.
This enters the selected recording mode.
R Auto
Standard Auto recording mode. This is the mode normally
used for shooting (page 28).
Ÿ Premium Auto
With Premium Auto recording, the camera automatically
determines whether you are shooting a subject or
scenery, and other conditions. Premium Auto recording
delivers higher image quality than standard Auto
recording mode (page 28).
b BEST SHOT
With BEST SHOT, simply select the sample scene that
resembles the type of shot you want, and the camera
automatically configures ideal settings for the subject and
shooting conditions (page 49).
h HDR
With HDR (High Dynamic Range), the camera shoots a
series of CS images using different exposure settings and
combines them into a final image to correct for
overexposure or underexposure of subjects of different
brightness levels (page 37).
A HDR Art
This mode digitally processes data to turn images you
shoot into worlds of art (page 38).
s Slide
Panorama
Simply move the camera as you record. The camera will
shoot a series of images and then combine them into a
sweeping panorama automatically.
36
Recording Images
Digitally Correcting for Overexposure and Underexposure
(HDR)
With HDR (High Dynamic Range), the camera shoots a series of CS images using
different exposure settings and combines them into a final image to correct for
overexposure or underexposure of subjects of different brightness levels.
1.
In the REC mode, touch the second icon from the top (Recording
mode).
2.
Touch “h” (HDR).
3.
Press the shutter button to shoot.
• After you press the shutter button, the message “Busy... Please wait...” will
appear on the monitor screen to indicate that recording is in progress. Keep the
camera still while this message is displayed. The recording process takes
some time to complete after the message appears. Image shooting is disabled
while the message is displayed.
• When using this feature, image size is fixed at 3M (2048x1536 pixels).
NOTE
• Use of a tripod is recommended when shooting with this function.
• Shooting with this function causes the flash setting to change automatically to
? (Flash Off).
• Shooting with this REC mode makes the shooting range narrower than normal.
• The desired HDR effect may not be attained if the camera or subject moves during
shooting.
• Depending on shooting conditions and image composition, this REC mode may not
be able to produce the desired result.
• Digital zoom is not supported while shooting with this function.
37
Recording Images
Shooting Snapshots Digitally Processed for Artistic Effect
(HDR Art)
This feature applies HDR (High Dynamic Range, page 37) photography to transform
snapshots into works of art that provide a greater degree of expression than
conventional photography.
Normal image
HDR Art image
1.
In the REC mode, touch the second icon from the top (Recording
mode).
2.
Touch “A” (HDR Art).
3.
Press the shutter button to shoot.
• After you press the shutter button, the message “Busy... Please wait...” will
appear on the monitor screen to indicate that recording is in progress. Keep the
camera still while this message is displayed. The recording process takes
some time to complete after the message appears. Image shooting is disabled
while the message is displayed.
• When using this feature, image size is fixed at 3M (2048x1536 pixels).
NOTE
• Use of a tripod is recommended when shooting with this function.
• Shooting with this function causes the flash setting to change automatically to ?
(Flash Off).
• Shooting with this REC mode makes the shooting range narrower than normal.
• The desired HDR Art effect may not be attained if the camera or subject moves
during shooting.
• Depending on shooting conditions and image composition, this REC mode may not
be able to produce the desired result.
• Digital zoom is not supported while shooting with this function.
38
Recording Images
. Adjusting the Level of the Art Effect
You can specify one of three levels for application of the art effect.
1.
For the recording mode, select “HDR Art”.
2.
Touch “ART +2”.
3.
Touch the level you want to select.
• 0 (off) - +3 (strong)
4.
Touch “OK”.
Shooting a Panorama Image (Slide Panorama)
With Slide Panorama, you move the camera to compose and
record multiple images, which are then combined to a
panorama. This feature lets you shoot a panorama which is
dramatically greater than the physical capabilities of the lens.
• The final panorama image can be one of the two sizes shown below.
Slide Direction is Right or Left: Maximum 5120x720 pixels
Slide Direction is Up or Down: Maximum 1280x4320 pixels
• Zoom operations are not supporting during Slide Panorama shooting. The zoom
setting is fixed at full wide angle.
• You can shoot a panorama image for approximately 240 degrees horizontally, or
approximately 180 degrees vertically.
1.
In the REC mode, touch the second icon from the top (Recording
mode).
2.
Touch “s” (Slide Panorama).
39
Recording Images
3.
Touch the icon for the slide direction (the
direction the camera will move while
shooting).
You can select one of four different slide directions:
“
” (right), “
” (left), “
” (up), “
” (down).
4.
Point the camera at the start of the panorama
and half-press the shutter button to allow the
camera to focus automatically.
5.
Press the shutter button the rest of the way
down and a slide cursor will appear on the
monitor screen. Slowly move the camera in
the direction indicated by the arrow on the
screen until the slide cursor reaches the
other end of its movement range (i.e. all the
way to the right when moving the camera to
the right).
Slide cursor
• The camera will start composing the panorama
image internally when the slide cursor reached the other end of the movement
range.
• Image composing also will start automatically if you stop moving the camera
during panorama shooting. After you stop moving the camera, the message
“Busy... Please wait...” appears as the camera processes the image. Wait until
this message disappears before using the camera. Image shooting is disabled
while the message is displayed.
40
Recording Images
NOTE
• The following conditions are not compatible with Slide Panorama shooting.
– Subject whose brightness is very different from that of its surroundings due to
artificial light, sunlight, etc.
– Rivers, waves, waterfalls, or other subject with constantly changing patterns
– Sky, beach, or other subject with continuous patterns
– Camera too close to the main subject
– Moving subject
• Slide Panorama may stop part way through in the following cases.
– Subject or camera movement
– Camera movement that is too fast or too slow
• Shooting a Slide Panorama image after half-pressing the shutter button to perform
Auto Focus may not produce the desired results if there are considerable
differences in the brightness, color, and/or focus of the individual images. If this
happens, try changing the focus position by focusing on a different subject, etc.
• Since a Slide Panorama image is created by joining multiple images together, there
may be some roughness at the point where two images are joined.
• Shooting under a flickering light source (such as fluorescent lighting) may result in
uneven brightness and/or coloring in the final Slide Panorama image.
• Shooting in dark surroundings may result in a blurred image or may make Slide
Panorama shooting impossible.
• Slowly move the camera at a constant speed in the same direction as the arrow
that appears on the monitor screen.
• When moving the camera, try to keep the arrow on the monitor screen as straight
as possible.
• The exposure and white balance when shooting Slide Panorama images are fixed
at the levels measured when you half-press the shutter button at the beginning of
the operation.
• An error message will appear if the camera is unable to successfully record a
series of images.
• If you shoot a moving subject, the camera may not be able to compose the
panorama image properly.
• Shooting with this function causes the flash setting to change automatically to ?
(Flash Off).
41
Recording Images
Using Flash (Flash)
1.
In the REC mode, touch the third icon from the top
(Flash).
2.
Touch the icon of the flash mode you want to use.
3.
Flash
> Auto
Flash fires automatically in accordance with exposure
(amount of light and brightness) conditions.
? Flash Off
Flash does not fire.
< Flash On
Flash always fires. This setting can be used to brighten a
subject that normally comes out dark due to daylight or
backlight (daylight synchro flash).
¥ Red Eye
Flash fires automatically. This type of flash can be used to
reduce the chance of redness in the subject’s eyes.
Press the shutter button to shoot.
< indicates the flash will fire.
Back lamp
Flashes orange while the flash is charging to indicate that image recording is disabled.
• You will not be able to take another flash snapshot until the lamp stops flashing
orange, which indicates that charging is complete.
• For information about Flash Range, see page 135.
42
Recording Images
NOTE
• Take care so your fingers and the strap do not block the flash.
• The desired effect may not be obtained when the subject is too far away or too
close.
• Flash charging time (page 135) depends on operating conditions (battery
condition, ambient temperature, etc.)
• Shooting with flash turned off when lighting is dim results in a slow shutter speed,
which can cause image blur due to camera movement. Under such conditions,
secure the camera with a tripod, etc.
• With red eye reduction, the flash is fired automatically in accordance with
exposure. It does not fire in areas where lighting is bright.
• The presence of outdoor sunlight, fluorescent lighting, or some other light source
can cause abnormal image colors.
• Select ? (Flash Off) for the flash setting when shooting in areas where flash
photograph is prohibited.
Red-eye Reduction
Using the flash to shoot at night or in a dimly lit room can cause red spots inside the
eyes of people who are in the image. This is caused when the light from the flash
reflects off of the retina of the eye. When red-eye reduction is selected as the flash
mode, the camera fires a pre-flash to cause the irises in the eyes of any people in the
image to close, which reduces the chance of red eye. This function also performs a
process that corrects for red-eye after the image is recorded.
Note the following important points when using red-eye reduction.
• Red-eye reduction does not work unless the people in the image are looking
directly at the camera (flash).
• Red-eye reduction may not work very well if the subjects are located far away from
the camera.
43
Recording Images
Shooting with Zoom
Your camera is equipped with various types of zoom: optical zoom, HD Zoom, Single
SR Zoom, and digital zoom. The maximum zoom factor depends on the image size
setting.
Optical zoom
Changes the lens focal distance.
HD Zoom
Allows greater zoom capabilities by cutting out a portion of the
original image and enlarging it.
Single SR Zoom
Applies super resolution technology to suppress image
deterioration.
Digital zoom
Digitally processes the center of the image to enlarge it.
1.
In the REC mode, slide the zoom controller to zoom.
w Wide Angle
z Telephoto
Zoom controller
w (Wide Angle): Reduces the size of the subject and broadens the range.
z (Telephoto) : Enlarges the subject and narrows the range.
2.
Press the shutter button to shoot the image.
IMPORTANT!
• Digital zoom, HD zoom, and Single SR zoom are disabled while time stamping
(page 104) is turned on.
NOTE
• Use of a tripod is recommended to protect against image blur due to camera
movement when shooting with telephoto.
• Performing a zoom operation changes the lens aperture.
B
44
Recording Images
Interpreting the Zoom Bar
During a zoom operation, a zoom bar appears on the monitor screen to show the
current zoom setting.
Range where image deterioration is suppressed.
(optical zoom, HD Zoom, Single SR Zoom)
1X
Deteriorated image range
(digital zoom)
32.0X to 127.5X
Zoom pointer
(Indicates current zoom.)
Optical zoom limit point
• 8.0X optical zoom point
Point from which image deteriorates
• This point can be anywhere from 12.0X to 86.2X when
Single SR Zoom is enabled, or 8.0X to 57.6X when it is
disabled.
. Zoom Icon
The appearance of the zoom icon on the monitor screen depends on the zoom factor.
Optical zoom
Not displayed
HD Zoom
Not displayed
Single SR Zoom
ç
Digital zoom
ê
45
Recording Images
. Zoom Factor
The digital zoom factor depends on the image size (page 53) and on whether Single
SR Zoom is enabled or disabled.
Image size
16M
Maximum zoom factor where image
deterioration can be suppressed
Single SR Zoom:
Off
Single SR Zoom:
On
8.0X
12.0X
Total maximum
zoom factor
32.0X
3:2
8.0X
12.0X
32.0X
5M
14.4X
21.6X
57.6X
VGA
57.6X
86.2X
127.5X
Zooming with Super Resolution (Single SR Zoom)
Super resolution technology makes it possible to expand the zoom range in which
image deterioration is minimized. For information about the effective zoom factor
ranges in which Single SR Zoom is effective, see page 46.
1.
In the REC mode, touch “MENU”.
2.
Drag upwards and downwards until you find “Single SR Zoom”.
3.
Touch “Single SR Zoom”.
4.
Touch “On”.
NOTE
• Single SR Zoom is effective when you want to capture delicate textures.
• Single SR Zoom does not work during movie recording.
• The following functions are disabled when shooting with Single SR Zoom.
Some BEST SHOT scenes, HDR, HDR Art, Slide Panorama
46
Recording Images
To record a movie
The following procedure explains how to record a movie.
• You can record a movie while one of the following
recording modes is selected.
– Auto
– Premium Auto
– BEST SHOT
1.
“MENU”
In the REC mode, touch “MENU”.
• If “MENU” is not displayed on the screen, touch
the tab to display it.
2.
Drag upwards and downwards until you find “Movie Quality”, and then
touch to select it.
3.
Touch the item whose setting you want to change.
Movie
Quality
Frame
Rate
Image Size
(Pixels)
Description
HD
24fps
1280x720
Select this setting to record high-definition
(HD) movies. The aspect ratio of movies
recorded with this setting is 16:9.
STD
30fps
640x480
Select this setting to record standard
movies.
4.
To close the menu screen, touch “MENU” or press the shutter button.
5.
Touch “b” (Movie).
This will start recording.
• Monaural audio is also recorded during movie
recording.
• Touching “o” while recording is in progress will
cause the remaining recording time and “R” to
appear. Touch “o” again to switch back to the
elapsed recording time.
Recording time/
Remaining recording time
“b” (Movie)/
“c” (Movie Stop)
47
Recording Images
6.
Touch “c” (Movie Stop) to stop recording.
• Each movie can be up to 29 minutes long. Movie recording stops automatically
after 29 minutes of recording. Movie recording also will stop automatically if
memory becomes full before you stop movie recording.
Minimizing the Effects of Camera Movement during Movie Recording
You can configure the camera to minimize the effects of camera movement during
movie recording. Note, however, that this does not prevent image blur due to subject
movement.
IMPORTANT!
• Spending a long time using movie recording will cause the camera to become
slightly warm to the touch. This is normal and does not indicate malfunction.
• The camera also records audio. Note the following points
when shooting a movie.
– Take care that the microphone is not blocked by your
fingers, etc.
– Good audio recording results are not possible when the
camera is too far away from what you are trying to
record.
Microphone
• Shooting a very bright subject can cause a vertical band or
a pink cast on the monitor screen image. This does not
indicate malfunction.
• Shooting a movie using the camera’s built-in memory will cause movie frames to
be dropped. Always use a high speed memory card (not built-in memory) for movie
recording.
• Use of certain types of memory cards slows down data transfer and increases the
time it takes to record movie data, which can result in movie frames being dropped.
The movie icon turns yellow to indicate that frames are being dropped. In order to
avoid problems such as these, use of an Ultra High Speed Type SD memory card
is recommended. Note, however that CASIO makes no guarantees about the
operation of any Ultra High Speed Type SD memory card used with this camera.
NOTE
• Single SR Zoom (page 44) is disabled during movie recording.
• The effects of camera movement in an image become more pronounced when you
shoot close up or with a large zoom factor. Because of this, use of a tripod is
recommended under these conditions.
B
48
Recording Images
Using BEST SHOT
BEST SHOT provides you with a collection of sample “scenes” that show a variety of
different types of shooting conditions. When you need to change the setup of the
camera, simply find the scene that matches what you are trying to achieve, and the
camera sets up for it automatically. This helps to minimize the chance of ruined
images due to poor exposure and shutter speed settings.
. To shoot an image with BEST SHOT
1.
In the REC mode, touch the second icon
from the top (Recording mode).
• If the icon is not displayed on the screen, touch
the tab to display it.
2.
Touch “b” (BEST SHOT).
This will display a menu of BEST SHOT scenes.
3.
Touch the scene you want to select.
• Touching “ ” in the upper right corner of the
screen and then touching a BEST SHOT scene
will display detailed information about the scene.
4.
Press the shutter button (if you are shooting a snapshot) or touch “b”
(Movie) (if you are shooting a movie).
. BEST SHOT Precautions
• BEST SHOT scene images were not shot using this camera.
• Images shot using a BEST SHOT scene may not produce the results you expected
due to shooting conditions and other factors.
• You can modify the camera settings that are configured after you select a BEST
SHOT scene. Note, however, that the BEST SHOT settings revert to their defaults
when you select another BEST SHOT scene or turn off the camera.
• Some scenes like Night Scene results in a slow shutter speed setting. Since a slow
shutter speed increases the chance of digital noise in the image, the camera
automatically performs a digital noise reduction process when either of these
scenes is selected. This means that it will take a bit longer for the image to be
saved which is indicated by the back lamp flashing green. Do not perform any key
operation during that time. Also, it is a good idea to use a tripod to avoid image blur
due to camera movement when shooting at slow shutter speeds.
49
Using BEST SHOT
Advanced Recording Settings
The following are menu operations you can use to configure various camera settings.
Using the REC Menu
. Example Menu Screen Operation
1.
In the REC mode, touch “MENU”.
This will display the menu screen.
• If “MENU” is not displayed on the screen, touch
the tab to display it.
• Menu contents are different in the REC mode
and PLAY mode.
2.
Drag upwards and downwards until you find the item whose setting
you want to change.
3.
Touch the item.
4.
Configure the setting of the item in accordance with the screen
contents.
• To cancel and exit the menu, touch “MENU” or press the shutter button.
NOTE
• Switching from “Auto” to “Premium Auto” (page 28) will make some menu items
unavailable.
. Menu Operations in This Manual
Menu operations are represented in this manual as shown below. Touch the indicated
icons and items, and perform operations as they are indicated, from left to right.
Procedure
Enter the REC Mode * MENU * Touch Shutter
50
Advanced Recording Settings
Using Touch Shutter (Touch Shutter)
Procedure
Enter the REC Mode * MENU * Touch Shutter
You can use the procedure below to shoot a snapshot.
1.
Touch “On”.
2.
Point the camera at the subject.
3.
When you want to shoot, touch the monitor screen.
The camera automatically comes into focus and then shoots.
• You can still use the shutter button to shoot even when “On” is selected for
Touch Shutter.
NOTE
• When “Auto” is selected as the recording mode, the camera will automatically focus
on the point you touch.
• When “Premium Auto” is selected as the recording mode, the camera will
automatically determine the optimum focus point(s) and focus automatically.
Shooting Snapshots of better Texture and Sharpness
(Single SR Quality)
Procedure
Enter the REC Mode * MENU * Single SR Quality
Super resolution technology is used to categorize an image into three parts: an
outline part, a fine pattern part, and a flat part, and then perform the optimum process
required by each part to increase texture and sharpness.
• Single SR Quality is effective when you want to capture delicate textures.
• A ç icon is displayed when the “Single SR Quality” setting is “On”.
• Single SR Quality is enabled for the entire zoom range, including digital zoom.
• It does not work during movie recording.
• The following functions are disabled when shooting with Single SR Quality.
Some BEST SHOT scenes, HDR, HDR Art, Slide Panorama
51
Advanced Recording Settings
Zooming with Super Resolution (Single SR Zoom)
Procedure
Enter the REC Mode * MENU * Single SR Zoom
See page 46 for details.
Using the Self-timer (Self-timer)
Procedure
Enter the REC Mode * MENU * Self-timer
With the Self-timer, pressing the shutter button starts a timer. The shutter is released
and the image is shot after a fixed amount of time.
10 sec
10-second Self-timer
2 sec
2-second Self-timer
• When shooting under conditions that slow down the shutter speed,
you can use this setting to prevent image blur due to camera
movement.
Off
Self-timer is disabled.
• The front lamp flashes while the Self-timer countdown is in
progress.
• You can interrupt an ongoing Self-timer countdown by
pressing the shutter button.
Front lamp
NOTE
• The Self-timer cannot be used together with Slide Panorama.
B
52
Advanced Recording Settings
Changing the Image Size (Image Size)
Procedure
Enter the REC Mode * MENU * Image Size
This setting can be used to configure snapshot image size.
Image Size
(Pixels)
Suggested Print
Size and
Application
16M (4608x3456)
Poster Print
3:2 (4608x3072)
Poster Print
Good detail for better clarity even for
images cropped from the original on a
computer, etc.
5M (2560x1920)
A4 Print
Good detail
VGA (640x480)
E Mail
Image files are smaller, which is better
when attaching images to e-mail.
However, images are relatively coarser.
Description
• The initial factory default image size setting is 16M (16 million pixels).
• Selecting “3:2” records images with an aspect ratio of 3:2, which matches the
standard aspect ratio of print paper.
• You should regard the print paper sizes suggested here as guidelines only (200 dpi
print resolution).
. Pixels
A digital camera image is a collection of small
dots called “pixels”. The more pixels there are
in an image, the more detail there will be.
However, you generally can do with fewer
pixels when printing an image (L size)
through a print service, attaching an image to
e-mail, when viewing the image on a
computer, etc.
53
Pixel
Advanced Recording Settings
. About image sizes
The size of an image indicates how many pixels it contains, and is expressed as
horizontal pixelsxvertical pixels.
16M (4608x3456) size image =
Approximately 16 million pixels
4608*
3456*
VGA (640x480) size image =
Approximately 300,000 pixels
640*
480*
* Unit: pixels
Image Size Selection Tips
Note that larger images have more pixels, so they take up more memory space.
Large Number
of Pixels
More detail, but takes up more memory. Best
when you plan to print large-size prints (such
as Poster size).
Small Number
of Pixels
Less detail, but takes up less memory. Best
when you want to send images by e-mail, etc.
• For information about image size and number of images that can be stored, see
page 133.
• For information about movie image size, see page 47.
• For information about resizing existing snapshots, see page 74.
Movie Image Quality Settings (Movie Quality)
Procedure
Enter the REC Mode * MENU * Movie Quality
See page 47 for details.
54
Advanced Recording Settings
Correcting Image Brightness (EV Shift)
Procedure
Enter the REC Mode * MENU * EV Shift
You can manually adjust an image’s exposure value (EV value) before shooting it.
• Exposure Compensation Range: –2.0 EV to +2.0 EV
• Unit: 1/3 EV
1.
Touch a level you want to set.
• To cancel exposure compensation, change the EV value to 0.0.
–2.0
+2.0
Decreases the EV value. A lower EV
value is best for dark-color subjects and
for shooting outdoors on a clear day.
2.
Increases the EV value. A higher EV
value is best for light-colored subjects
and backlit subjects.
Touch “OK”.
This applies the exposure compensation value. The exposure compensation
value you set remains in effect until you change it or turn off the camera (which
causes it to revert to “0.0”).
NOTE
• When shooting under very dark or very bright conditions, you may not be able to
obtain satisfactory results even after performing exposure compensation.
55
Advanced Recording Settings
Adjusting White Balance (White Balance)
Procedure
Enter the REC Mode * MENU * White Balance
You can adjust white balance to match the source of light available where you are
shooting and avoid the blue cast that results when shooting outdoors when it is
cloudy, and the green cast that results when shooting under fluorescent lighting.
1.
Touch the type of white balance you want to select.
You can see the affect of the white balance setting you select on the monitor
screen.
‡ Auto WB
Configures the camera to adjust white balance automatically
¤ Daylight
For shooting outdoors on a clear day
' Overcast
For shooting outdoors on an overcast rainy day, in the
shade, etc.
“ Shade
For shooting on a clear day in the shade of trees or buildings
† DayWhite
Fluor
For shooting under white or day white fluorescent lighting
– Daylight
Fluor
For shooting under daylight fluorescent lighting
« Tungsten
For shooting under light bulb lighting
· Manual WB
For configuring the camera manually to suit a particular light
source.
Blank white paper
1 Touch “· Manual WB”.
2 In the location where you plan to
shoot, point the camera at a blank
white piece of paper so it fills the entire
monitor screen.
3 Touch an area of the screen where no
icon is located.
The white balance setting is retained even if you turn off the
camera.
• When “‡ Auto WB” is selected for the white balance setting, the camera
automatically determines the white point of the subject. Certain subject colors
and light source conditions can cause problems when the camera tries to
determine the white point, which makes proper white balance adjustment
impossible. If this happens, select the white balance setting that matches your
shooting conditions (Daylight, Overcast, etc.).
2.
Touch “OK”.
56
Advanced Recording Settings
Specifying ISO Sensitivity (ISO)
Procedure
Enter the REC Mode * MENU * ISO
ISO sensitivity is a measure of sensitivity to light.
AUTO
Adjusts sensitivity automatically according to conditions
ISO 80
Lower sensitivity Slow shutter speed
Less noise
ISO 100
ISO 200
ISO 400
ISO 800
ISO 1600
Higher
ISO 3200 sensitivity
Fast shutter speed (Set for Some coarseness
shooting in dimly lit areas.) (increased digital noise)
• Higher ISO sensitivity values tend to result in digital noise in images.
• Since higher ISO sensitivity values tend to result in digital noise in images, the
camera performs a noise filtering process. Because of this, it may take relatively
longer for the camera to finish recording an image after it is shot. You will not be
able to perform any operation while image recording is in progress.
Optimizing Image Brightness (Lighting)
Procedure
Enter the REC Mode * MENU * Lighting
You can use this setting to optimize the balance between bright areas and dark areas
when shooting images.
Extra
Performs a higher level of brightness correction than the “On” setting.
When this option is selected, it takes longer for the image to be stored
after the shutter button is pressed.
On
Performs brightness correction.
Off
Does not perform brightness correction.
57
Advanced Recording Settings
Selecting a Focus Mode (Focus)
Procedure
Enter the REC Mode * MENU * Focus
Changing to a different focus mode can help to achieve better focus.
Type of
Shot
Settings
AF (Auto
Focus)
General
recording
Macro
Close ups
Super
Macro
Close ups
MF
(Manual
Focus)
When you
want to focus
manually
Focus Mode
Snapshot
Movies
Approximate Focus Range*1
Snapshot
Movies
Approximately 5 cm to 9
(infinity) (2.0" to 9)
(Wide Angle)
Automatic
Approximately 2 cm to 50 cm
(0.8" to 19.7") (Seventh step
zoom from the Widest Angle
setting)
Approximately 2 cm to 50 cm
(0.8" to 19.7")
Manual
Approximately 5 cm to 9
(infinity)*2 (2.0" to 9)
(Wide Angle)
*1 The focus range is the distance from the lens surface.
*2 The minimum changes along with the optical zoom setting.
Super Macro
Super Macro fixes optical zoom at a position that allows you to shoot from the closest
distance to the subject. The result is closer and larger subject images.
NOTE
• Zoom is fixed while Super Macro is selected, so no zoom operation is performed
when you slide the zoom controller.
58
Advanced Recording Settings
To focus with manual focus
1.
On the monitor screen, compose the image
so the subject you want to focus on is within
the yellow boundary.
2.
Touch “W”.
3.
Watching the image on the monitor screen,
touch “+” (closer) or “–” (further) to adjust
focus.
Yellow boundary
• At this time the image that is within the boundary
will enlarge and fill the monitor screen, which aids
in focusing. The camera will return to the screen
in step 1 if you touch “T” or if you do not perform
any operation for about three seconds.
NOTE
• An Auto Macro feature detects how far the subject is from the lens and
automatically selects either Macro Focus or Auto Focus accordingly.
• Use of the flash together with Macro Focus can cause the light of the flash to
become blocked, which may result in unwanted lens shadows in your image.
Using Focus Lock
Subject to be focused on
“Focus lock” is a technique you can use when you want
to compose an image in which the subject you want to
focus on is not within the focus frame in the center of
the screen.
1.
B
Align the monitor screen’s focus frame with
the subject you want to focus on and then
half-press the shutter button.
59
Focus frame
Advanced Recording Settings
2.
Keeping the shutter button half-pressed
(which maintains the focus setting), move
the camera to compose the image.
3.
When you are ready to shoot the image,
press the shutter button the rest of the way
down.
NOTE
• Focus lock also locks exposure (AE).
• The focus frame does not appear on the display when the Touch Shutter is
enabled (On).
Shooting with Continuous Auto Focus (Continuous AF)
Procedure
Enter the REC Mode * MENU * Continuous AF
When shooting a snapshot while “On” is selected for Continuous AF, Auto Focus is
performed and focusing is continually updated until you half-press the shutter button.
• Before you half-press the shutter button, the camera focuses at the center of the
screen.
• Shooting with Continuous AF can cause vibration and noise to occur due to lens
operation. This does not indicate malfunction.
Using the Auto Focus Assist Light (AF Assist Light)
Procedure
Enter the REC Mode * MENU * AF Assist Light
Half-pressing the shutter button while this setting is selected
causes the front lamp to light, which provides illumination for
focusing in areas where lighting is dim. Leaving this function
turned off is recommended when shooting portraits from short
distances, etc.
Front lamp
IMPORTANT!
• Never look directly into the front lamp while it is lit.
60
Advanced Recording Settings
Reducing the Effects of Camera and Subject Movement
(Anti Shake)
Procedure
Enter the REC Mode * MENU * Anti Shake
You can turn on the camera’s Anti Shake feature to reduce image blur due to subject
movement or camera movement when shooting a moving subject using telephoto,
when shooting a fast-moving subject, or when shooting under dim lighting conditions.
Your digital camera is equipped with a CCD shift type camera shake correction
feature and a high-sensitivity anti image blur feature. These two features work in
concert to minimize the effects of hand and subject movement.
A On
Minimizes the effects of hand and subject movement.
Off
Turns off Anti Shake settings
F DEMO
Half-pressing the shutter button demonstrates the effect of Anti
Shake. However, the image is not recorded.
NOTE
• Only Camera Stabilizer can be used during movie recording.
• ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen
when you half-press the shutter button while “On” is selected. These values will
appear briefly, however, in the preview image that is displayed immediately after
you shoot a snapshot.
• Shooting while “On” is selected can cause an image to appear somewhat coarser
than normal and can cause slight deterioration of image resolution.
• Anti Shake may not be able to eliminate the effects of camera or subject movement
when movement is severe.
• Anti Shake may not work properly when the camera is mounted on a tripod. Turn
off Anti Shake.
Turning on Image Review (Review)
Procedure
Enter the REC Mode * MENU * Review
While Review is turned on, the camera will display a image for about one second
immediately after you press the shutter button to record it.
• Aperture, shutter speed, and ISO sensitivity values will be amber if Auto Exposure
(AE) is incorrect.
61
Advanced Recording Settings
Viewing Snapshots and Movies
Viewing Snapshots
See page 32 for the procedure for viewing snapshots.
Viewing a Movie
1.
Press [p] (PLAY) or touch “f”
(PLAY) to enter the PLAY mode.
• If “f” (PLAY) is not displayed on the
screen, touch the tab to display it.
2.
Touch “ú” or “õ”, or drag left or
right across the screen image to
scroll through the movies until the
one you want is displayed.
• To scroll at high speed, touch and hold
“ú” or “õ”.
3.
Image quality
Movie icon: 6
“f” (PLAY)
Recording time
Touch “6” (Movie) to start playback.
Playback in progress
Playback paused
Touch “|”.
Touch “6”.
Progress bar
B
62
Viewing Snapshots and Movies
Movie Playback Controls
Pause/Play
Touch “|” (pause) or “6” (play).
Fast forward/
Fast reverse
During playback, touch “{” (fast reverse) or “}” (fast
forward).
• Each touch of either button increases the speed of the
fast forward or fast reverse operation.
• To return to normal playback speed, touch “6”.
Stop playback
During playback, touch “.”.
Volume adjustment
During playback, touch “n” and then drag the volume bar
to the desired level.
• Volume can be adjusted only while movie playback is in
progress.
1 frame forward/
back
While playback is paused, touch “z” or “y”.
• Touching and holding this icon advances frames
continuously.
Information display
on/off
Touch the screen.
Movie editing
Pause movie play at the location where you want to cut,
and then touch “~” (page 64).
• Playback may not be possible for movies not recorded with this camera.
63
Viewing Snapshots and Movies
Editing a Movie on the Camera (Movie Editing)
The Movie Editing feature lets you cut out a specific part of a movie.
1.
Enter the PLAY mode and then start playback of the movie you want to
edit.
2.
When playback reaches the location where you want to cut, touch “|”
to pause.
3.
Touch “~”.
4.
Touch the option that specifies what you want to cut.
5.
¡
Previous Cut
Cuts everything from the beginning of the movie up to
the current location.
¢
Next Cut
Cuts everything from the current location to the end of
the movie.
Touch “Cut”.
The selected cut operation will take considerable time to complete. Don’t try to
perform any camera operation until the “Busy... Please wait...” message
disappears from the monitor screen. Note that a cut operation can take a long
time if the movie being edited is long.
IMPORTANT!
• When you edit a movie, only the result is saved. The original movie is not retained.
An editing operation cannot be undone.
NOTE
• A movie that is shorter than five seconds cannot be edited.
• Editing of movies recorded with a different type of camera is not supported.
• You will not be able to edit a movie if the amount of remaining memory capacity is
less than the size of the movie file you want to edit. If there is not enough memory
available, delete files you no longer need to free up more.
• Splitting of a movie into two movies and splicing of two different movies into a
single movie are not supported.
64
Viewing Snapshots and Movies
Viewing a Panorama Image
1.
Press [p] (PLAY) or touch “f” (PLAY) to enter the PLAY mode.
2.
Touch “ú” or “õ” or drag upwards or
downwards to display the panorama image
you want to view.
• To scroll at high speed, touch and hold “ú” or
“õ”.
3.
Touch “6” to play the panorama.
Panorama playback causes the image to scroll left, right, up, or down.
Playback Controls
Pause/Play
Touch “|” (pause) or “6” (play).
Stop playback
During playback, touch “.”.
Scroll the panorama
image
While playback is paused, drag the screen.
Information display
on/off
Touch the screen.
• The following functions cannot be performed on a panorama image.
Dynamic Photo, Movie Converter, Movie Editing, Trimming, Resize, Rotation
65
Viewing Snapshots and Movies
Playing a Slideshow on the Camera (Slideshow)
You can use the slideshow mode to automatically scroll through all of the images in
camera memory.
1.
In the PLAY mode, touch “q” for the
playback mode.
This will start the slideshow.
• If “q” is not displayed on the screen, touch the
tab to display it.
NOTE
• All operations are disabled while the slideshow is transitioning from one image to
another.
• The time required for transition from one image to another may be longer in the
case of an image that was not recorded with this camera.
• To return to normal (single image) display, touch the monitor screen.
Viewing the Image Menu
The image menu shows multiple images on a single screen.
1.
In the PLAY mode, touch “]”.
This displays the image menu.
• You also can display the image menu by sliding
the zoom controller towards [w] (]).
• Touch “û” or “ü” or drag upwards or
downwards to scroll to the next page of images.
• To view the normal (single image) display mode,
touch the image your want to view or touch “ë”.
• In the case of a movie, the first image in the movie is displayed.
B
66
Viewing Snapshots and Movies
Zooming an On-screen Image
Snapshots can be zoomed on the monitor screen up to 8X.
• The actual available zoom factors depend on the size of the original image.
1.
In the PLAY mode, touch “ú” or “õ” or drag left or right to display the
image you want to view.
2.
Spread your thumb and forefinger (page 13)
on the displayed image to enlarge it.
• You can zoom an image by sliding the zoom
controller towards [z] ([).
• Dragging an enlarged screen image will change
the part of the image that is displayed.
• Squeezing your thumb and forefinger (page 14)
on the displayed image will reduce it in size.
– When monitor screen contents are turned on, a
graphic in the lower right corner of the screen
shows what part of the zoomed image is
currently displayed.
• Touching “ú” or “õ” while an enlarged image is
displayed will scroll to the next sequential image
while maintaining the current zoom factor.
• To return to normal (single image) display, touch “ë”.
67
Zoom factor
Image area
Current display area
Viewing Snapshots and Movies
Viewing Snapshots and Movies on a TV Screen
1.
Use the AV cable that comes with the camera to connect it to the TV.
White
Yellow
TV
Video
AV cable (bundled)
Audio
AUDIO IN jacks (white)
[USB/AV] port
VIDEO IN jack (yellow)
Making sure that the 6 mark on the camera is aligned with the 4 mark of the
AV cable connector, connect the cable to the camera.
• Make sure that you insert the cable connector into the
USB/AV port until you feel it click securely into place.
Failure to insert the connector fully can result in poor
communication or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as shown in the
illustration.
2.
Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is
connected.
3.
Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen.
• You also can change the aspect ratio of the screen and
the video output system (page 108).
• The contents of the remote controller image will depend
on the type of image that is displayed on the TV screen.
68
Viewing Snapshots and Movies
4.
Touch the camera monitor screen to perform operations.
NOTE
• Audio is monaural.
• Audio is initially output by the camera at maximum volume. When you first start
displaying images, set the TV volume control at a relatively low level and then
adjust it as required.
Recording Camera Images to a DVD Recorder or Video Deck
Use one of the following methods to connect the camera to the recording device
using the camera’s bundled AV cable.
– DVD recorder or video deck: Connect to the VIDEO IN and AUDIO IN terminals.
– Camera: USB/AV port
You can play a slideshow of snapshots and movies on the camera and record it on a
DVD or video tape.
For information about connecting a monitor to the recording device and about how to
record, see the user documentation that comes with the recording device you are
using.
69
Viewing Snapshots and Movies
Other Playback Functions (PLAY)
The following are menu operations you can use to configure various camera settings.
Using the PLAY Menu
. Example Menu Screen Operation
1.
In the PLAY mode, touch “MENU”.
This will display the menu screen.
• If “MENU” is not displayed on the screen, touch
the tab to display it.
• Menu contents are different in the REC mode
and PLAY mode.
2.
Touch the item whose setting you want to change.
3.
Configure the setting of the item in accordance with the screen
contents.
• To cancel and exit the menu, touch “MENU” or press the shutter button.
. Menu Operations in This Manual
Menu operations are represented in this manual as shown below. Touch the indicated
icons and items, and perform operations as they are indicated, from left to right.
Procedure
Enter the PLAY Mode * MENU * Protect
70
Other Playback Functions (PLAY)
Protecting a File Against Deletion (Protect)
Procedure
Enter the PLAY Mode * MENU * Protect
You can protect images to prevent them from being
deleted.
• A protected image will be indicated by “›”.
All Files On
Protects all files.
All Files Off
Unprotects all files.
Select
Protects and unprotects specific files.
1Touch “û” or “ü” or drag upwards or downwards to display
the image you want to protect.
2Touch an image to be protected,
and “›” will appears on the
image.
You can repeat steps 1 and 2
as many times as necessary to
select multiple images.
3Touch “OK”.
To unprotect an image, touch it in step 2 of the above
procedure to remove “›”.
IMPORTANT!
• Note that even if a file is protected, it will be deleted if you perform the format
operation (page 109).
71
Other Playback Functions (PLAY)
Copying Files (Copy)
Procedure
Enter the PLAY Mode * MENU * Copy
Files can be copied from the camera’s built-in memory to a memory card or from a
memory card to built-in memory.
Built-in * Card
Copies all files from built-in camera memory to a memory card.
This option copies all the files in built-in camera memory. It
cannot be used to copy a single file.
Card * Built-in
Copies a single file on the memory card to camera built-in
camera memory. Files are copied to the folder in built-in
memory whose name has the largest serial number.
1Touch “ú” or “õ” or drag left or right to display the image
you want to copy.
2Touch “Copy”.
NOTE
• You can copy snapshots or movies, you recorded with this camera.
Using Red Eye Correction (Red Eye)
Procedure
Enter the PLAY Mode * MENU * Red Eye
Using the flash to shoot at night or in a dimly lit room can cause red spots inside the
eyes of people who are in the image. This is caused when the light from the flash
reflects off of the retina of the eye. Red eye correction corrects the eye colors of
subjects to their normal colors when red eye occurs while using the flash.
Correct
Turns on red eye correction.
Cancel
Turns off red eye correction.
NOTE
• The original snapshot is retained in memory and not deleted.
• Red eye correction may not be possible in the case of small faces or profiles.
• Red eye correction may not produce the desired effect under certain conditions.
72
Other Playback Functions (PLAY)
Cropping a Snapshot (Trimming)
Procedure
Enter the PLAY Mode * MENU * Trimming
You can crop a snapshot to trim parts you do not need, and save the result in a
separate file. The original snapshot is also retained.
1.
Touch “ú” or “õ” or drag left or right to display the image you want to
crop.
2.
Touch “OK”.
3.
Drag the image until the part you want to
keep is displayed.
• To enlarge the image, touch the screen with your
thumb and forefinger and then spread them apart.
To reduce the size of the image, touch the screen
with your thumb and forefinger and then squeeze
them together. You also can use the zoom
controller to enlarge or reduce the image size.
4.
Zoom factor
Represents
snapshot area
Touch “OK”.
This will crop the image, leaving only the displayed
part.
Part of snapshot that is
currently displayed
NOTE
• The image produced by cropping a 3:2 image will have an aspect ratio of 4:3.
• The recording date of the cropped image will be the same as the recording date of
the original snapshot.
B
73
Other Playback Functions (PLAY)
Resizing a Snapshot (Resize)
Procedure
Enter the PLAY Mode * MENU * Resize
You can reduce the size of a snapshot and save the result as a separate snapshot.
The original snapshot is also retained. You can select resize an image to one of three
image sizes: 5M, 3M, VGA.
1.
Touch “ú” or “õ” or drag left or right to display the image you want to
resize.
2.
Touch a size.
This resizes the image to the selected size and saves the result as a new
photograph.
NOTE
• Resizing a 3:2 size snapshot will create an image with an aspect ratio of 4:3, with
both sides cut off.
• The recording date of the resized version of the snapshot will be the same as the
recording date of the original snapshot.
Rotating an Image (Rotation)
Procedure
Enter the PLAY Mode * MENU * Rotation
1.
Touch “ú” or “õ” or drag upwards or downwards to display the image
you want to rotate.
2.
Touch “Rotate”.
This will rotate the image 90 degrees to the left.
3.
When the image is in the orientation you want, touch “u”.
NOTE
• Rotation of a panorama image is not supported.
• Note that this procedure does not actually change the image data. It simply alters
how the image is displayed on the camera’s monitor screen.
• An image that has been protected or zoomed cannot be rotated.
B
74
Other Playback Functions (PLAY)
Selecting Images for Printing (DPOF Printing)
Procedure
Enter the PLAY Mode * MENU * DPOF Printing
See page 80 for details.
75
Other Playback Functions (PLAY)
Dynamic Photo
This camera comes with a number of subjects in built-in
memory (“built-in subjects”), which you can insert into
snapshots and movies to create Dynamic Photo images.
• The term “built-in subjects” refers to the moving figures
and characters that came pre-programmed in the
camera’s built-in memory.
Built-in Subject
Another Image
™
Dynamic Photo Image
Inserting a Built-in Subject into a Snapshot or Movie
(Dynamic Photo)
Use the following procedure to insert a built-in subject image into a snapshot (except
for a panorama image) or movie.
1.
Enter the PLAY mode.
2.
Touch “MENU”.
• If “MENU” is not displayed on the screen, touch the tab to display it.
3.
Touch “Dynamic Photo”.
4.
Touch “ú” or “õ” or drag left or right to select the background image,
and then touch “OK”.
• Only an image that satisfies the following conditions can be used as a
background image.
– A snapshot or movie recorded with this camera or a snapshot transferred to
this camera’s memory using Photo Transport (page 90)
– A snapshot with an aspect ratio of 4:3
5.
Touch “ú” or “õ” or drag left or right to select the built-in subject
sample you want to insert, and then touch “OK”.
• If you are inserting a subject into a snapshot, go directly to step 8.
B
76
Dynamic Photo
6.
If you are inserting a subject into a movie,
use “y” and “z” to configure the time zone
in the movie where you want the subject to
appear.
• If you insert a subject into a movie, the resulting
movie will be a maximum of 20 seconds long.
Everything before and after the insertion is cut off.
If the movie you are inserting into (original movie)
is shorter than 20 seconds, the resulting movie
will be the same length as the original movie.
Insert location
7.
Touch “OK”.
8.
Use the zoom controller to adjust the size of
the subject and drag the subject to change
its location on the screen.
9.
After the subject’s size and position are the way you want, touch “OK”.
The subject is merged with the background image to create a Dynamic Photo.
• Inserting an animated subject into a snapshot will save a Dynamic Photo that
consists of 20 still images of 2M size or smaller.
• Inserting a subject into a movie will save the Dynamic Photo as a movie file.
NOTE
• Performing a delete or format operation will not delete the built-in subjects.
B
77
Dynamic Photo
To view a Dynamic Photo (Dynamic Photo File)
1.
Enter the PLAY mode.
2.
Drag left or right to display the Dynamic Photo you want to play back.
3.
Touch “6” (PLAY).
The Dynamic Photo is repeated as a continuous loop.
• Movement of the subject also will start automatically about two seconds after
you display a Dynamic Photo.
Converting a Dynamic Photo Still Image to a Movie
(Movie Converter)
A Dynamic Photo with a still image background and a moving subject is stored as a
series of 20 still images. You can use the following procedure to convert the
20 images that make up a Dynamic Photo to a movie.
1.
Enter the PLAY mode.
2.
Drag left or right to display the Dynamic Photo you want to convert to a
movie.
3.
Touch “MENU”.
4.
Touch “Movie Converter”.
• The final movie format is Motion JPEG.
• The final movie image size is 640x480 pixels.
78
Dynamic Photo
Printing
Printing Snapshots
Professional Print Service
You can take a memory card that contains the images you want
to print to a professional print service and have them printed.
Printing on a Home Printer
Printing Images on a Printer with Memory Card Slot
You can use a printer equipped with a memory card slot to print
images directly from a memory card. For details, see the user
documentation that comes with your printer.
Printing with a Computer
After transferring the images to your computer, use
commercially available software to print.
• You can specify which images you want to print, the number of copies, and date
stamp settings before printing (page 80).
79
Printing
Using DPOF to Specify Images to be Printed and the Number
of Copies
. Digital Print Order Format (DPOF)
DPOF is a standard that allows you to include image type, number of copy,
and time stamp on/off information on the memory card with the images.
After configuring settings, you can use the memory card to print on a home
printer that supports DPOF or take the memory card to a professional print
service.
• Whether or not you will be able to use DPOF settings for printing depends on the
printer you are using.
• Some professional print services may not support DPOF.
. Configuring DPOF Settings Individually for Each Image
Procedure
MENU * Setup * DPOF Printing * Select images
1.
Touch “ú” or “õ” or drag left or right to display the image you want to
print.
2.
Touch the number of copies value.
3.
Touch “ú” or “õ” to specify the number of
copies.
Number of copies
You can specify a value up to 99. Specify 0 if you do
not want to print the image.
4.
Touch “OK”.
• Touch “DATE” to toggle it between “ON” (date printed) and “OFF” (date not
printed). Switching from “OFF” to “ON” automatically changes the number of
copies value to 1.
• The images that will be printed are marked with a check mark (v).
• Repeat steps from 1 to 4 to configure settings for other images, if you want.
5.
B
Touch “OK”.
80
Printing
. Configuring the Same DPOF Settings for All the Images
Procedure
MENU * Setup * DPOF Printing * All images
1.
Touch “Date stamping”.
2.
Touch “On” to turn date stamping on or “Off” to turn it off.
• Switching from “Off” to “On” automatically changes the number of copies value
to 1.
3.
Touch “ú” or “õ” to specify the number of prints.
You can specify a value up to 99. Specify 0 if you do not want to print the image.
4.
Touch “OK”.
DPOF settings are not cleared automatically after printing is complete.
The next DPOF print operation you execute will be performed using the last DPOF
settings you configured for the images. To clear DPOF settings, specify “0” for the
number of copies of all images.
Tell your print service about your DPOF settings!
If you take a memory card to a professional print service, be sure to tell them that it
includes DPOF settings for the images to be printed and the number of copies. If you
don’t, the print service may print all the images without regard to your DPOF settings,
or they may ignore your date stamp setting.
B
81
Printing
. Date Stamping
You can use one of the following three methods to include the recording date in the
printout of an image.
Configuring camera settings
Configure DPOF settings (page 80).
You can turn date stamping on and off each time you print. You can configure
settings so some images include the date stamp and some don’t.
Configure the Camera’s Time Stamp setting (page 104).
• The camera’s Time Stamp setting imprints the date into a snapshot when you
shoot it, so the date is always included when you print. It cannot be deleted.
• Do not turn on DPOF date stamping for an image that includes a date
stamped with the camera’s Time Stamp function. Doing so can cause the two
stamps to be overprinted.
Configuring computer settings
You can use commercially available image management software to date
stamp images.
Professional print service
Request date stamping when ordering prints from a professional print service.
. Standards Supported by the Camera
• PRINT Image Matching III
Using image editing software and printing on a printer that supports
PRINT Image Matching III makes it possible to use information about
shooting conditions that is recorded with the image, and produce
exactly the type of image you want. PRINT Image Matching and
PRINT Image Matching III are trademarks of Seiko Epson Corporation.
• Exif Print
Printing on a printer that supports Exif Print uses information
about shooting conditions recorded with the image to enhance
printed image quality. Contact your printer manufacturer for
information about models that support Exif Print, printer upgrades, etc.
82
Printing
Using the Camera with a Computer
Things you can do using a computer...
You can perform the operations described below while the camera is connected to a
computer.
Save images to a
computer and
view them there
• Save images and view them manually
(USB connection) (pages 85, 95).
• Transfer images to a computer
automatically over a wireless LAN for
viewing (Eye-Fi) (page 99).
Transfer images
stored on your
computer to
camera memory
In addition to images, you also can transfer
screen shot images from your computer to
the camera (Photo Transport*) (page 90).
Play back and
edit movies
• You can play back movies (pages 88, 98).
• To edit movies, use commercially
available software as required.
Transform
snapshots into
artistic images
Transform your snapshots into images that
look like they were painted (Virtual Painter 5
LE for CASIO*) (page 92).
Play back and edit
Dynamic Photo
images on your
EXILIM, a
computer, or on a
mobile phone
• You can copy moving subjects (animated
characters) from your computer to the
EXILIM.
• You can convert Dynamic Photo images to
movies and send them to a mobile phone
for playback (Requires Dynamic Photo
Manager*) (page 92).
* Windows only
The procedures you need to perform when using the camera with your computer and
when using the bundled software are different for Windows and the Macintosh.
• Windows users should refer to “Using the Camera with a Windows Computer”
on page 84.
• Macintosh users should refer to “Using the Camera with a Macintosh” on page
95.
83
Using the Camera with a Computer
Using the Camera with a Windows Computer
Install the required software in accordance with the version of Windows you are
running and what you want to do.
When you want to
do this:
Operating System
Version
Install this software:
See
page:
Save images to a
computer and view
them there manually
Windows 7,
Windows Vista,
Windows XP (SP3)
Installation not required.
85
Play movies
Windows 7,
Windows Vista,
Windows XP (SP3)
Installation not required.
• Windows Media Player,
which is already
installed on most
computers, can be used
for playback.
88
Edit movies
Windows 7,
Windows Vista,
Windows XP (SP3)
–
• Use commercial software
as required.
–
Upload movie files to
YouTube
Windows 7,
Windows Vista,
Windows XP (SP3)
YouTube Uploader for
CASIO*
89
Transfer images to the
camera
Windows 7,
Windows Vista,
Windows XP (SP3)
Photo Transport 1.0*
90
Transform snapshots
into artistic images
Windows 7,
Windows Vista,
Windows XP (SP3)
Virtual Painter 5 LE for
CASIO*
92
Dynamic Photo
Manager*
92
Play back, copy, and
Windows 7,
edit Dynamic Photo
Windows Vista (SP1),
moving subjects
Windows XP (SP3)
(animated characters)
View the User’s Guide
Windows 7,
Adobe Reader 9
Windows Vista,
(Not required if already
Windows XP (SP2, SP3),
installed.)
Windows 2000 (SP4)
94
* YouTube Uploader for CASIO, Photo Transport, Virtual Painter 5 LE for CASIO, and
Dynamic Photo Manager will not run under 64-bit versions of Windows OS.
84
Using the Camera with a Computer
. Computer System Requirements for Bundled Software
Computer system requirements are different for each of the applications. See the
“Read me” file that comes with each application for details. Information about
computer system requirements also can be found under “Computer System
Requirements for Bundled Software (For Windows)” on page 123 of this manual.
. Precautions for Windows Users
• Except for Adobe Reader, the bundled software requires Administrator privileges to
run.
• Operation on a self-made computer is not supported.
• Operation may not be possible under certain computer environments.
Viewing and Storing Images on a Computer
You can connect the camera to your computer in order to view and store images
(snapshot and movie files).
NOTE
• You also can use your computer’s card slot (if it has one) or a commercially
available card reader to access image files directly from the camera’s memory
card. For details, see the user documentation that comes with your computer.
. To connect the camera to your computer and save files
1.
Press [ON/OFF] (Power) to turn off the camera.
2.
Use the USB cable that
comes with the camera
to connect it to your
computer.
USB port
USB cable
(included with camera)
Large connector
The camera will turn on
automatically and battery
charging will start (page 18).
• The camera may not turn
on automatically in the
case of certain computer
[USB/AV]
models or connection
port
Small connector
conditions. If this
happens, press [ON/OFF]
(Power) to turn on the
camera.
Making sure that the 6 mark on the camera is
• Make sure that you insert
aligned with the 4 mark of the USB cable
the cable connector into
connector, connect the cable to the camera.
the USB port until you
feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
85
Using the Camera with a Computer
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
• When connecting the USB cable to a USB port, make
sure you align the connector correctly with the port.
• Your computer may not be able to recognize the camera if you connect via a
USB hub. Always connect directly to the computer’s USB port.
• The first time you connect the camera to your computer with the USB cable, an
error message may appear on your computer. If this happens, disconnect and
then reconnect the USB cable.
3.
Windows 7, Windows Vista users: Click “Start” and then “Computer”.
Windows XP users: Click “Start” and then “My Computer”.
4.
Double-click “Removable Disk”.
• Your computer recognizes the memory card loaded in the camera (or built-in
memory if there is no card) as a removable disk.
5.
Right-click the “DCIM” folder.
6.
On the shortcut menu that appears, click “Copy”.
7.
Windows 7, Windows Vista users: Click “Start” and then “Documents”.
Windows XP users: Click “Start” and then “My Documents”.
• If you already have a “DCIM” folder in “Documents” (Windows 7, Windows
Vista) or “My Documents” (Windows XP), the next step will overwrite it. If you
want to keep the existing “DCIM” folder, you need to change its name or move
it to a different location before performing the next step.
8.
Windows 7 users: On the “Documents” “Organize” menu, select
“Paste”.
Windows Vista users: On the “Documents” “Edit” menu, select
“Paste”.
Windows XP users: On the “My Documents” “Edit” menu, select
“Paste”.
This will paste the “DCIM” folder (and all the image files it contains) into your
“Documents” (Windows 7, Windows Vista) or “My Documents” (Windows XP)
folder. You now have a copy of the files that are in camera memory on your
computer.
9.
After you finish copying images, disconnect the camera from the
computer.
86
Using the Camera with a Computer
. To view images you copied to your computer
1.
Double-click the copied “DCIM” folder to open it.
2.
Double-click the folder that contains the images you want to view.
3.
Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 102.
• An image that was rotated on the camera will be displayed on your computer
screen in its original (unrotated) orientation.
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
87
Using the Camera with a Computer
Playing Movies
Windows Media Player, which is already installed on most computers, can be used
for movie playback. To play back a movie, first copy the movie to your computer and
then double-click the movie file.
. Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back
movies recorded with this camera on a computer.
Operating System : Windows 7, Windows Vista, Windows XP (SP3)
CPU
: Image Quality “HD”:
Pentium 4 3.2 GHz or higher
Image Quality “STD”:
Pentium M 1.0 GHz or higher
Pentium 4 2.0 GHz or higher
Required Software: Windows Media Player, DirectX 9.0c or higher
• The above are recommended system environments. Configuring one of these
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of
movies.
. Movie Playback Precautions
• Be sure to move the movie data to the hard disk of your computer before trying to
play it. Proper movie playback may not be possible for data accessed over a
network, from a memory card, etc.
• Proper movie playback may not be possible on some computers. If you experience
problems, try the following.
– Try recording movies with a quality setting of “STD”.
– Try upgrading Windows Media Player to the latest version.
– Quit any other applications you have running, and stop resident applications.
Even if proper playback is not possible on the computer, you can use the AV cable
that comes bundled with the camera to connect to the video input terminal of a TV or
computer and play back movies that way.
88
Using the Camera with a Computer
Uploading Movie Files to YouTube
Installing YouTube Uploader for CASIO from the CD-ROM that comes with your
camera simplifies uploading of movie files you recorded.
. What is YouTube?
YouTube is a movie sharing site managed by YouTube, LLC where you can upload
movies and view movies uploaded by others.
. To install YouTube Uploader for CASIO
1.
On the CD-ROM menu screen, select “YouTube Uploader for CASIO”.
2.
After reading the information about installation conditions and system
requirements for installation in the “Read me” file, install YouTube
Uploader for CASIO.
. To upload a movie file to YouTube
• Before you can use YouTube Uploader for CASIO, you need to go to the YouTube
website (http://www.youtube.com/) and register as a user there.
• Do not upload any video that is copyrighted (including neighboring copyrights)
unless you yourself own the copyright or you have obtained the permission of the
applicable copyright holder(s).
• The maximum file size for each upload is 2048MB or a recording time of up to
15 minutes.
1.
Record a movie (page 47).
2.
If it isn’t already, connect your computer to the Internet.
3.
Connect the camera to your computer (page 85).
The camera will turn on automatically and battery charging will start (page 18).
YouTube Uploader for CASIO will start up automatically.
• If this is the first time you are using the application, configure the YouTube user
ID and network environment settings, and then click the [OK] button.
4.
The left side of the display will have an area for inputting a title,
category, and other information required for uploading to YouTube.
Enter the required information.
5.
The right side of the display shows a list of movie files in camera
memory. Select the check box next to the movie file you want to
upload.
89
Using the Camera with a Computer
6.
When everything is ready, click the [Upload] button.
This will upload the movie file(s) to YouTube.
• After uploading is complete, click the [Exit] button to exit the application.
Transferring Images from Your Computer to Camera Memory
If you want to transfer images from your computer to the camera, install Photo
Transport on your computer from the CD-ROM that comes with the camera.
. To install Photo Transport
1.
On the CD-ROM menu screen, select “Photo Transport”.
2.
After reading the information about installation conditions and system
requirements for installation in the “Read me” file, install Photo
Transport.
. To transfer images to the camera
1.
Connect the camera to your computer (page 85).
The camera will turn on automatically and battery charging will start (page 18).
2.
On your computer, click the following: Start * All Programs *
CASIO * Photo Transport.
This starts up Photo Transport.
3.
Drag the file(s) you want to transfer to the [Transfer] button.
4.
Follow the instructions that appear on the display to complete the
transfer.
• The details of the instructions that appear on the display and the transferred
images will depend on your Photo Transport setup. For details, click the
[Settings] button or [Help] button and check the setup.
Transfer Data
• Only image files with the following extensions can be transferred to the camera:
jpg, jpeg, jpe, bmp (bmp images are converted to jpeg images automatically when
transferred.)
• Certain types of images may not be able to be transferred.
• You cannot transfer movies to the camera.
90
Using the Camera with a Computer
. To transfer computer screen captures to the camera
1.
Connect the camera to your computer (page 85).
The camera will turn on automatically and battery charging will start (page 18).
2.
On your computer, click the following: Start * All Programs *
CASIO * Photo Transport.
This starts up Photo Transport.
3.
Display the screen whose screen capture you want to transfer.
4.
Click the [Capture] button.
5.
Draw a boundary around the area you want to capture.
Move your mouse pointer to the upper left corner of the area you want to capture
and then hold down the mouse button. Keeping the mouse button depressed,
drag the pointer down to the lower right corner of the area and then release the
mouse button.
6.
Follow the instructions that appear on the display.
This will send an image of the area you selected to the camera.
• The transfer operation converts screen captures to JPEG format.
• The instructions that appear on the display and details about the transferred
images will depend on your Photo Transport setup. For details, click the
[Settings] button or [Help] button and check the setup.
. About settings and help
Click the [Settings] button when you want to change the Photo Transport setup. For
help about operation procedures and troubleshooting, click the Photo Transport
[Help] button.
91
Using the Camera with a Computer
Play back Dynamic Photo images on your EXILIM, a computer,
or on a mobile phone
You can copy moving subjects (animated characters) from your computer to the
EXILIM. You also can convert Dynamic Photo images to movies and send them to a
mobile phone for playback. To perform such functions, you need to install Dynamic
Photo Manager on your computer from the CD-ROM that comes with your EXILIM.
For details, see the Dynamic Photo Manager user’s guide that comes with your
EXILIM.
Transforming Snapshots into Artistic Image
The CD-ROM that comes with your camera contains an application called Virtual
Painter 5 LE for CASIO. By installing this application on your computer, you can
transform your digital images so they appear as if they were drawn or painted by
hand. You can choose from among water color, oil, color pencil or pastel effects that
produce images that looked like they were done by a true virtual artist.
• Assistance: Umemura Taka Software Design, Inc.
. To install Virtual Painter 5 LE for CASIO
1.
Use the CD-ROM menu screen to select “Virtual Painter 5 LE for
CASIO”.
2.
First click “Read me”, read the information it contains about
installation and computer system requirements, and then install the
application.
When you are prompted to input a serial number during the installation, input the
following.
11-08-900006-deeNEe
IMPORTANT!
• Note the following important points when inputting the serial number.
– Input using single-byte characters only.
– The serial number is case-sensitive, so be sure to input uppercase and
lowercase letters correctly.
92
Using the Camera with a Computer
. To transform snapshots into artistic images
1.
On your computer, click the following in sequence: Start *
All Programs * Virtual Painter 5 LE for CASIO.
This will start up Virtual Painter 5 LE for CASIO.
2.
On the toolbar, click [File] - [Open] and then select the image file you
want to transform.
• If necessary, you can click a folder icon and select an image inside the folder.
3.
On the toolbar, click [Paint] or the canvas icon to transform the image.
For details about this operation, click the Virtual Painter [Help] button.
IMPORTANT!
• Virtual Painter 5 LE for CASIO supports transformation of JPEG images shot with
CASIO brand EXILIM Series digital cameras only. Transformation of images shot
with a different brand digital camera is not supported.
• Be sure to use “Save As” or otherwise change to a different file name when saving
a snapshot that you have transformed into an artistic image. Using “Save” will
cause the transformed image to overwrite your original snapshot, effectively
deleting the original.
93
Using the Camera with a Computer
Viewing User Documentation (PDF Files)
1.
Start up your computer, and place the bundled CD-ROM into its CDROM drive.
Normally, this should cause the menu screen to appear automatically. If your
computer does not display the menu screen automatically, navigate to the CDROM on your computer and then double-click the “AutoMenu.exe” file.
2.
On the menu screen, click the “Language” down arrow button and then
select the language you want.
3.
Click “Manual” to select it and then click “Digital Camera”.
IMPORTANT!
• You must have Adobe Reader or Adobe Acrobat Reader installed on your
computer in order to view the contents of a PDF file. If you do not already have
Adobe Reader or Adobe Acrobat Reader installed, install Adobe Reader from the
bundled CD-ROM.
User Registration
You can perform user registration over the Internet. To do so, of course, you need to
be able to connect to the Internet with your computer.
1.
On the CD-ROM menu screen, click the “Register” button.
• This starts up your Web browser and accesses the user registration website.
Follow the instructions that appear on your computer screen to register.
94
Using the Camera with a Computer
Using the Camera with a Macintosh
Install the required software in accordance with what version of the Macintosh OS
you are running and what you want to do.
When you want to
do this:
Operating
System Version
Save images to your
Macintosh and view
them there manually
OS 9
Save images to your
Macintosh
automatically/
Manage images
OS 9
Use commercially available
software.
OS X
Use iPhoto, which comes bundled
with some Macintosh products.
Play movies
OS 9, OS X
You can playback with
QuickTime, which comes bundled
with your operating system.
OS X
Install this software:
See
page:
Installation not required.
95
97
98
Connecting the Camera to Your Computer and Saving Files
IMPORTANT!
• The camera does not support operation with Mac OS 8.6 or earlier, or Mac OS X
10.0. Operation is supported with Mac OS 9, X (10.1, 10.2, 10.3, 10.4, 10.5, 10.6)
only. Use the standard USB driver that comes with your supported operating
system.
NOTE
• You also can use your computer’s card slot (if it has one) or a commercially
available card reader to access image files directly from the camera’s memory
card. For details, see the user documentation that comes with your computer.
95
Using the Camera with a Computer
. To connect the camera to your computer and save files
1.
Press [ON/OFF] (Power) to turn off the camera.
2.
Use the USB cable that
comes with the camera
to connect it to your
Macintosh.
USB port
USB cable
(included with camera)
Large connector
The camera will turn on
automatically and battery
charging will start (page 18).
• The camera may not turn
on automatically in the
case of certain computer
[USB/AV]
port
models or connection
Small connector
conditions. If this
happens, press [ON/OFF]
(Power) to turn on the
camera.
Making sure that the 6 mark on the camera is
• Make sure that you insert
aligned with the 4 mark of the USB cable
the cable connector into
connector, connect the cable to the camera.
the USB port until you
feel it click securely into place. Failure to insert the connector fully can result in
poor communication or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
• When connecting the USB cable to a USB port, make
sure you align the connector correctly with the port.
• Your computer may not be able to recognize the camera if you connect via a
USB hub. Always connect directly to the computer’s USB port.
• The first time you connect the camera to your computer with the USB cable, an
error message may appear on your computer. If this happens, disconnect and
then reconnect the USB cable.
3.
Double-click the camera’s drive icon.
The camera’s back lamp will light green at this time. In this mode, your Macintosh
recognizes the memory card loaded in the camera (or the camera’s built-in
memory if it does not have a memory card loaded) as a drive. The appearance of
the drive icon depends on the Mac OS version you are using.
4.
Drag the “DCIM” folder to the folder to which you want to copy it.
5.
After the copy operation is complete, drag the drive icon to Trash.
6.
Disconnect the camera from the computer.
96
Using the Camera with a Computer
. To view copied images
1.
Double-click the camera’s drive icon.
2.
Double-click the “DCIM” folder to open it.
3.
Double-click the folder that contains the images you want to view.
4.
Double-click the image file you want to view.
• For information about file names, see “Memory Folder Structure” on page 102.
• An image that was rotated on the camera will be displayed on your Macintosh
screen in its original (unrotated) orientation.
Never use your computer to modify, delete, move, or rename any image files
that are in the camera’s built-in memory or on its memory card.
Doing so can cause problems with the camera’s image management data, which
will make it impossible to play back images on the camera and can drastically alter
remaining memory capacity. Whenever you want to modify, delete, move, or
rename an image, do so only on images that are stored on your computer.
IMPORTANT!
• Never unplug the USB cable, or operate the camera while viewing or storing
images. Doing so can cause data to become corrupted.
Transferring Images Automatically and Managing Them on
Your Macintosh
If you are running Mac OS X, you can manage snapshots using iPhoto, which comes
bundled with some Macintosh products. If you are running Mac OS 9, you will need to
use commercially available software.
97
Using the Camera with a Computer
Playing a Movie
You can use QuickTime, which comes bundled with your operating system, to play
back movies on a Macintosh. To play back a movie, first copy it to your Macintosh
and then double-click the movie file.
. Minimum Computer System Requirements for Movie Playback
The minimum system requirements described below are necessary to play back
movies recorded with this camera on a computer.
Operating System : Mac OS X 10.3.9 or higher
Required Software: QuickTime 7 or higher
• The above are recommended system environments. Configuring one of these
environments does not guarantee proper operation.
• Certain settings and other installed software may interfere with proper playback of
movies.
. Movie Playback Precautions
Proper movie playback may not be possible on some Macintosh models. If you
experience problems, try the following.
– Change the movie image quality setting to “STD”.
– Upgrade to the latest version of QuickTime.
– Shut down other applications that are running.
Even if proper playback is not possible on your Macintosh, you can use the AV cable
that comes bundled with the camera to connect to the video input terminal of a TV or
Macintosh and play back movies that way.
IMPORTANT!
• Be sure to move the movie data to the hard disk of your Macintosh before trying to
play it. Proper movie playback may not be possible for data accessed over a
network, from a memory card, etc.
98
Using the Camera with a Computer
Viewing User Documentation (PDF Files)
You must have Adobe Reader or Adobe Acrobat Reader installed on your computer
in order to view the contents of a PDF file. If you don’t, go to the Adobe Systems
Incorporated website and install Acrobat Reader.
1.
On the CD-ROM, open the “Manual” folder.
2.
Open the “Digital Camera” folder and then open the folder for the
language whose user’s guide you want to view.
3.
Open the file named “camera_xx.pdf”.
• “xx” is the language code (Example: camera_e.pdf is for English).
User Registration
Internet registration only is supported. Visit the following CASIO website to register:
http://world.casio.com/qv/register/
Using an Eye-Fi Wireless SD Memory Card to Transfer Images
(Eye-Fi)
Shooting with an Eye-Fi wireless SD memory card loaded in the camera makes it
possible to transfer image data automatically to a computer via wireless LAN.
1.
Configure LAN access point, transfer destination and other settings for
the Eye-Fi card in accordance with the instructions that come with the
Eye-Fi card.
2.
After configuring settings, load the Eye-Fi card into the camera and
record.
Images you record are sent by wireless LAN to your computer, etc.
• For full details, see the user documentation that comes with the Eye-Fi card.
• Before formatting a new Eye-Fi card to use it for the first time, copy the Eye-Fi
Manager install files to your computer. Do this before formatting the card.
99
Using the Camera with a Computer
IMPORTANT!
• Recorded images are transferred over wireless LAN. Do not use the Eye-Fi card or
turn off Eye-Fi card communication (page 103) when on an aircraft or in any other
location where use of wireless communication is limited or prohibited.
• The Eye-Fi icon will be displayed on the monitor screen while all
three of the following conditions exist: Eye-Fi card loaded; Eye-Fi
setting “On”; Status On (page 110).
• The camera’s Auto Power Off function is disabled while image data
transfer is in progress.
• A confirmation message will appear on the monitor screen if you try to turn off the
camera while image data transfer is in progress. Follow the instructions in the
messages (page 131).
• Transfer of a large number of images can take some time to complete.
• Depending on the type of Eye-Fi card you are using and its settings, images on the
Eye-Fi card may be deleted following image data transfer.
• When recording a movie to an Eye-Fi card, it can take too much time to record
data, which can result in breaks in the image and/or audio.
• Proper Eye-Fi card data communication may not be possible due to camera
settings, battery level, or operating conditions.
100
Using the Camera with a Computer
Files and Folders
The camera creates a file each time you shoot a snapshot, record a movie, or
perform any other operation that stores data. Files are grouped by storing them in
folders. Each file and folder has its own unique name.
• For details about how folders are organized in memory, see “Memory Folder
Structure” (page 102).
Name and Maximum Number Allowed
Example
Each folder can contain up to 9999 files named
CIMG0001 through CIMG9999. The extension
on the file name depends on the file type.
26th file name:
File
CIM G0026.JPG
Extension
Serial number (4 digits)
Folders
Folders are named from 100CASIO to
999CASIO.
There can be up to 900 folders in memory.
100th folder name:
100CASIO
Serial number (3 digits)
• You can view folder and file names on your computer. For details about how file
names are displayed on the camera’s monitor screen, see page 10.
• The total number of folders and files allowed depends on the image size and
quality, and capacity of the memory card being used for storage.
Memory Card Data
The camera stores images you shoot in accordance with the Design Rule for Camera
File System (DCF).
. About DCF
The following operations are supported for DCF-compliant images. Note, however,
that CASIO makes no performance guarantees concerning these operations.
• Transferring this camera’s DCF-compliant images to another manufacturer’s
camera and view them.
• Printing this camera’s DCF-compliant images on another manufacturer’s printer.
• Transferring another camera’s DCF-compliant images to this camera and view
them.
101
Using the Camera with a Computer
. Memory Folder Structure
100CASIO
CIMG0001.JPG
CIMG0002.AVI
CIMG0005.JPE
DCIM Folder
Recording Folder
Image File
Movie File
Subject Image File
101CASIO
102CASIO
Recording Folder
Recording Folder
DCIM
MISC
AUTPRINT.MRK
DPOF File Folder
DPOF File
. Supported Image Files
• Image files shot with this camera
• DCF-compliant image files
This camera may not be able to display an image, even if it is DCF-compliant. When
displaying an image recorded on another camera, it may take a long time for the
image to appear on this camera’s monitor screen.
. Built-in Memory and Memory Card Data Handling Precautions
• Whenever copying memory contents to your computer, you should copy the DCIM
folder and all of its contents. A good way to keep track of multiple DCIM folders it to
change their names to dates or something similar after you copy them to your
computer. If you later decided to return a DCIM folder to the camera, however, be
sure to change its name back to DCIM. The camera is designed to recognize only a
root file with the name DCIM. Note the camera also will not be able to recognize the
folders inside the DCIM folder unless they have the names they originally had
when you copied them from the camera to your computer.
• Folders and files must be stored in accordance with the “Memory Folder Structure”
shown on page 102 in order for the camera to be able to recognize them correctly.
• You also can use a PC card adapter or a memory card reader/writer to access
camera files directly from the camera’s memory card.
• A Subject Image File (CIMG****.JPE) contains special image data. Never edit a
Subject Image File on your computer and transfer it back to the camera. Doing so
can cause abnormal camera operation.
102
Using the Camera with a Computer
Other Settings (Set Up)
This section explains menu items that you can use to configure settings and perform
other operations in both the REC mode and PLAY mode.
For information about menu operations, see page 50.
Adjusting Monitor Screen Brightness (Screen)
Procedure
MENU * Setup * Screen
You can use the following procedure to change the brightness of the monitor screen.
Auto
With this setting, the camera detects available light levels and
automatically adjusts the brightness of the monitor screen accordingly.
+2
Brightness that is greater than +1, which makes the screen easier to view.
This setting consumes more power.
+1
Bright setting for outdoor use, etc. Brightness that is greater than 0.
0
Normal monitor screen brightness for indoor use, etc.
–1
Screen brightness for viewing in a dark environment without disturbing
others around you.
Turning off Eye-Fi Card Communication (Eye-Fi)
Procedure
MENU * Setup * Eye-Fi
Select “Off” to disable Eye-Fi card communication (page 99).
103
Other Settings (Set Up)
Configuring Camera Sound Settings (Sounds)
Procedure
MENU * Setup * Sounds
Startup
Half Shutter
Toggles the operation tone between on and off.
Shutter
Operation
Volume
Specifies the sound volume. This volume setting is also
Operation used during video output (from the USB/AV port) (page
68).
Playback
Specifies the volume of movie audio output. This volume
setting is also used during video output (from the USB/
AV port) (page 68).
• Setting a volume level of 0 mutes output.
Time Stamping Snapshots (Timestamp)
Procedure
MENU * Setup * Timestamp
You can configure the camera to stamp the recording date only, or date and time in
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or
deleted.
Example: July 10, 2012, 1:25 p.m.
Date
2012/7/10
Date&Time
2012/7/10 1:25pm
Off
No stamping of date and/or time
• Even if you do not stamp the date and/or time with Timestamp, you can do so later
using some printing application.
• Stamping is performed in accordance with the date and time settings (page 106)
and the display style settings (page 107).
104
Other Settings (Set Up)
Configuring World Time Settings (World Time)
Procedure
MENU * Setup * World Time
Setting a Travel Destination
You can use the World Time screen to view the current time in a zone that is different
from your Home City when you go on a trip, etc. World Time displays the current time
in 162 cities in 32 time zones around the globe.
1.
Touch “Destination”.
• To change the geographic area and city for the time where you normally use
the camera, select “Home”.
2.
Touch “City”.
To specify summer time for the destination city, select “DST” and then select the
“On” setting (Summer time is used in some geographical areas to advance the
current time setting by one hour during the summer months).
3.
Drag upwards and downwards until you find the area of the destination
city you want, and then touch to select it.
4.
Drag upwards and downwards until you find the city you want, and
then touch to select it.
IMPORTANT!
• Before configuring World Time settings, make sure that the Home City setting is
the place where you live or normally use the camera. If it isn’t, select “Home” on the
screen in step 1 and configure the Home City, date, and time settings as required
(page 106).
105
Other Settings (Set Up)
Selecting the Time Display
Use this procedure to specify the time displayed by the camera for your home city
and destination.
1.
Touch “Time”.
2.
Touch “Home” or “Destination”.
This will configure the time setting of the location you touched in the previous
step.
Setting the Camera’s Clock (Adjust)
Procedure
MENU * Setup * Adjust
1.
Touch the value you want to change (year,
month, day, hour, minute).
2.
Touch “8” or “2” to change the currently
selected value.
• You can specify a date from 2001 to 2049.
• Be sure to select your Home City (page 105)
before setting the time and date. If you set the
12/24 hour switch icon
time and date while the wrong city is selected for
your Home City, the times and dates of all of the
World Time cities (page 105) will be wrong.
• To switch between 12-hour and 24-hour format, touch the 12/24 hour switch
icon.
• Touching and holding “8” or “2” scrolls at high speed.
3.
B
Touch “OK”.
106
Other Settings (Set Up)
Specifying the Date Style (Date Style)
Procedure
MENU * Setup * Date Style
You can select from among three different styles for the date.
Example: July 10, 2012
YY/MM/DD
12/7/10
DD/MM/YY
10/7/12
MM/DD/YY
7/10/12
Specifying the Display Language (Language)
Procedure
MENU * Setup * Language
. Specify the display language you want.
1.
On the menu screen, touch “Setup”.
2.
Touch “Language”.
3.
Drag upwards and downwards until you find
the language you want, and then touch to
select it.
• Camera models sold in certain geographic areas may not support display language
selection.
107
Other Settings (Set Up)
Calibrating the Touch Panel (Calibrate TP)
Procedure
MENU * Setup * Calibrate TP
Calibrate the touch panel whenever a touch operation does not produce the desired
results or if touch panel response is poor.
1.
Touch “Start”.
2.
Touch the centers of each of the four cross
marks “+” as they appear on the screen.
Take your time when performing this
operation and wait until the next cross
appears.
The message “Complete” indicates that touch
panel calibration is complete.
• Carefully touch the center of each cross mark (+).
Selecting the Screen Aspect Ratio and Video Output System
(Video Out)
Procedure
MENU * Setup * Video Out
You can use the procedure in this section to select either NTSC or PAL as the video
output system. You can also specify an aspect ratio of 4:3 or 16:9.
NTSC
Video system used in Japan, the U.S., and other countries
PAL
Video system used in Europe and other areas
4:3
Normal TV screen aspect ratio
16:9
Wide screen aspect ratio
• Select the aspect ratio (4:3 or 16:9) that matches the type of TV you plan to use.
Images will not display correctly if you select the wrong aspect ratio.
• Images will not display correctly unless the camera’s video signal output setting
matches the video signal system of the TV or other video equipment.
• Images cannot be displayed correctly on a TV or video equipment that is not NTSC
or PAL.
108
Other Settings (Set Up)
Formatting Built-in Memory or a Memory Card (Format)
Procedure
MENU * Setup * Format
If a memory card is loaded in the camera, this operation will format the memory card.
It will format built-in memory if no memory card is loaded.
• The format operation will delete all contents on the memory card or in built-in
memory. It cannot be undone. Make sure you do not need any data currently on
the card or in built-in memory before you format it.
• Formatting built-in memory or a memory card will delete all protected images
stored there.
• Check the battery level before starting a format operation and make sure it is not
too low. Formatting may not be performed correctly and the camera may stop
operating normally if the camera powers down while formatting is in progress.
Resetting the Camera to Factory Defaults (Reset)
Procedure
MENU * Setup * Reset
See page 124 for details about the camera’s factory default settings.
The settings below are not reset.
World Time settings, clock settings, date style, screen language, video output
109
Other Settings (Set Up)
Configuring Monitor Screen Settings
Selecting Display Information (DISP)
Each touch of “DISP” will cycle through settings that display or hide on-screen
information. You can configure separate settings for the REC mode and PLAY mode.
• If “DISP” is not displayed on the screen, touch the tab to display it.
• Display information cannot be changed during movie recording.
Off
No information displayed.
Information On
Shows information about image settings, etc.
Status On
Shows more detailed information about settings.
• When Status On is selected, you will not be able to view
the subject on the monitor screen.
110
Configuring Monitor Screen Settings
Appendix
Precautions during Use
. Avoid Use While In Motion
• Never use the camera to record or play back images while operating an automobile
or other vehicle, or while walking. Looking at the monitor while in motion creates
the risk of serious accident.
. Directly Viewing the Sun or Bright Light
• Never look at the sun or any other bright light through the cameras viewfinder.
Doing so can damage your eyesight.
. Flash
• Never use the flash unit in areas where flammable or explosive gas may be
present. Such conditions create the risk of fire and explosion.
• Never fire the flash in the direction of a person operating a motor vehicle. Doing so
can interfere with the driver’s vision and creates the risk of accident.
• Never fire the flash too close to the eyes of the subject. Doing so creates the risk of
loss of eyesight.
. Monitor Screen
• Should the monitor screen ever become cracked, never touch any of the liquid
inside the monitor screen. Doing so creates the risk of skin inflammation.
• Should monitor screen liquid ever get into your mouth, immediately rinse your
mouth out and contact your physician.
• Should monitor screen liquid ever get into your eyes or onto your skin, immediately
rinse with clean water for at least 15 minutes and contact your physician.
. Connections
• Never plug any devices that are not specified for use with this camera into
connectors. Connecting a non-specified device creates the risk of fire and electric
shock.
. Transport
• Never operate the camera inside of an aircraft or anywhere else where operation of
such devices is restricted. Improper use creates the risk of serious accident.
111
Appendix
. Smoke, abnormal odor, overheating, and other abnormalities
• Continued use of the camera while it is emitting smoke or strange odor, or while it
is overheating creates the risk of fire and electric shock. Immediately perform the
following steps whenever any of the above symptoms are present.
1. Turn off the camera.
2. Remove the battery from the camera, taking care to protect yourself against burn
injury.
3. Contact your dealer or nearest CASIO authorized service center.
. Water and Foreign Matter
• Water, other liquids, or foreign matter (especially metal) getting inside the camera
creates the risk of fire and electric shock. Immediately perform the following steps
whenever any of the above symptoms are present. Particular care is required when
using the camera where it is raining or snowing, near the ocean or other body of
water, or in a bathroom.
1. Turn off the camera.
2. Remove the battery from the camera.
3. Contact your dealer or nearest CASIO authorized service center.
. Dropping and Rough Treatment
• Continued use of the camera after it is damaged by dropping or other rough
treatment creates the risk of fire and electric shock. Immediately perform the
following steps whenever any of the above symptoms are present.
1. Turn off the camera.
2. Remove the battery from the camera.
3. Contact your dealer or nearest CASIO authorized service center.
. Keep Away From Fire
• Never expose the camera to fire, which can cause it to explode and creates the risk
of fire and electric shock.
. Disassembly and Modification
• Never try to take the camera apart or modify it in any way. Doing so creates the risk
of electric shock, burn injury, and other personal injury. Be sure to leave all internal
inspection, maintenance, and repair up to your dealer or nearest CASIO authorized
service center.
112
Appendix
. Locations To Be Avoided
• Never leave the camera in any of the following types of locations. Doing so creates
the risk of fire and electric shock.
– Areas subject to large amounts of humidity or dust
– Food preparation areas or other locations where oil smoke is present
– Near heaters, on a heated carpet, in areas exposed to direct sunlight, in a closed
vehicle parked in the sun, or other areas subject to very high temperatures
• Never place the camera on an unstable surface, on a high shelf, etc. Doing so can
cause the camera to fall, creating the risk of personal injury.
. Backing Up Important Data
• Always keep backup copies of important data in camera memory by transferring it
to a computer or other storage device. Note that data can be deleted in the case of
camera malfunction, repair, etc.
. Memory Protection
• Whenever replacing the battery, be sure to follow the correct procedure as
described in the documentation that comes with the camera. Incorrectly replacing
the battery can result in corruption or loss of data in camera memory.
. Rechargeable Battery
• Use only the USB-AC adaptor (AD-C53U) or the specified device to charge the
battery. Attempting to charge the battery by an unauthorized means creates the
risk of battery overheating, fire, and explosion.
• Do not expose or immerse the battery in fresh water or salt water. Doing so can
damage the battery, and cause deterioration of its performance and loss of service
life.
• The battery is intended for use with a CASIO Digital Camera only. Use with any
other device creates the risk of the battery damage, or deterioration of battery
performance and service life.
• Failure to observe any of the following precautions creates the risk of battery
overheating, fire, and explosion.
– Never use or leave the battery near open flame.
– Do not expose the battery to heat or fire.
– Never carry or store the battery together with items that can conduct electricity
(necklaces, pencil lead, etc.).
– Never disassemble the battery, pierce it with a needle, or expose it to strong
impact (hit it with a hammer, step on it, etc.), and never apply solder to it. Never
place the battery into a microwave oven, heater, high-pressure generating
device, etc.
113
Appendix
• Should you ever notice leakage, strange odor, heat generation, discoloration,
deformation, or any other abnormal condition while using, charging, or storing a
battery, immediately remove it from the camera and keep it away from open flame.
• Do not use or leave the battery under direct sunlight, in an automobile parked in the
sun, or in any other area subject to high temperatures. Doing so can damage the
battery, and cause deterioration of its performance and loss of service life.
• If battery charging does not end normally within the specified charging time, stop
charging anyway and contact your local CASIO authorized service center.
Continued charging creates the risk of battery overheating, fire, and explosion.
• Battery fluid can damage your eyes. Should battery fluid get into your eyes
accidentally, immediately rinse them with clean tap water and then consult a
physician.
• Be sure to read the user documentation that comes with the camera and special
USB-AC adaptor before using or charging the battery.
• If a battery is to be used by young children, make sure that a responsible adult
makes them aware of the precautions and proper handling instructions, and make
sure that they handle the battery correctly.
• Should fluid from a battery accidentally get onto clothing or your skin, immediately
rinse it off with clean tap water. Prolonged contact with battery fluid can cause skin
irritation.
. Battery Life
• Battery continuous operation times provided in this manual represent the
approximate amount of time before the camera turns off due to low battery power
when being powered by the special battery under normal temperature (23°C
(73°F)). They do not guarantee that you will be able to achieve the indicated level
of operation. Actual battery life is greatly affected by ambient temperature, battery
storage conditions, the amount of time spent in storage, etc.
• Leaving the camera on can run down the battery and cause the low battery
warning to appear. Turn off the camera whenever you are not using it.
• The low battery warning indicates that the camera is about to turn off due to low
battery power. Charge the battery as soon as possible. Leaving a low or dead
battery in the camera can lead to battery leakage and data corruption.
114
Appendix
. Data Error Precautions
Your digital camera is manufactured using precision digital components. Any of the
following creates the risk of corruption of data in camera memory.
– Removing the battery or memory card while the camera is performing some
operation
– Removing the battery or memory card while the back lamp is flashing green after
turning off the camera
– Disconnecting the USB cable while communication is in progress
– Using a battery that is low
– Other abnormal operations
Any of the above conditions can cause an error message to appear on the monitor
screen (page 131). Perform the action indicated by the message that appears.
. Operating Environment
• Operating Temperature Requirements: 0 to 40°C (32 to 104°F)
• Operating Humidity: 10 to 85% (non condensation)
• Do not place the camera in any of the following locations.
– In an area exposed to direct sunlight, or large amounts of moisture, dust, or sand
– Near an air conditioner or in other areas subjected to extreme temperature or
humidity
– Inside of a motor vehicle on a hot day, or in an area subjected to strong vibration
. Condensation
Sudden and extreme temperature changes, such as when the camera is moved from
the outdoors on a cold winter day into a warm room, can cause water droplets called
“condensation” to form on the interior and the exterior of the camera, which creates
the risk of malfunction. To prevent condensation from forming seal the camera in a
plastic bag before changing locations. Then leave the bag sealed to allow the air
inside to naturally change to the same temperature as the air in the new location.
After that, remove the camera from the bag and open the battery cover for a few
hours.
. Lens
• Never apply too much force when cleaning the surface of the lens. Doing so can
scratch the lens surface and cause malfunction.
• You may sometimes notice some distortion in certain types of images, such as a
slight bend in lines that should be straight. This is due to the characteristics of
lenses, and does not indicate malfunction of the camera.
115
Appendix
. Caring for your camera
• Never touch the lens or flash window with your fingers. Finger smudges, dirt, and
other foreign matter on the lens or flash window can interfere with proper operation
of the camera. Use a blower or other means to keep the lens and flash window free
of dirt and dust, and wipe gently with a soft, dry cloth.
• To clean the camera, wipe it with a soft, dry cloth.
. Old Rechargeable Battery Handling Precautions
• Insulate the positive and negative terminals with tape, etc.
• Do not peel the covering off of the battery.
• Do not try to take the battery apart.
. USB-AC adaptor Handling Precautions
-
0 Never plug the power cord into an outlet whose voltage rating is different from
that marked on the power cord. Doing so creates the risk of fire, malfunction,
and electric shock.
0 Take care to protect the power cord against damage and breaking. Never place
heavy objects onto the power cord, or expose it to intense heat. Doing so can
damage the power cord, creating the risk of fire and electric shock.
0 Never try to modify the power cord, or subject it to severe bending, twisting, or
pulling. Doing so creates the risk of fire, malfunction, and electric shock.
0 Never plug in or unplug the power cord while your hands are wet. Doing so
creates the risk of electric shock.
0 Do not plug the power cord into an outlet or extension cord that is shared by
other devices. Doing so creates the risk of fire, malfunction, and electric shock.
0 Should the power cord ever become damaged (to the point that internal wires
are exposed or cut), immediately contact your original retailer or a CASIO
authorized service center to request repair. Continued use of a damaged power
cord creates the risk of fire, malfunction, and electric shock.
• The USB-AC adaptor becomes slightly warm during charging. This is normal and
does not indicate malfunction.
• Unplug the power cord from the power outlet when you are not using the USB-AC
adaptor.
• Never use detergent to clean the power cord (especially the plug).
• Never cover the USB-AC adaptor with a blanket, etc. Doing so creates the risk of
fire.
116
Appendix
. Other Precautions
The camera becomes slightly warm during use. This is normal and does not indicate
malfunction.
. Copyrights
Except for your own personal enjoyment, unauthorized use of snapshots or movies of
images whose rights belong to others, without the permission of the right holder, is
forbidden by copyright laws. In some cases, shooting of public performances, shows,
exhibitions, etc. may be restricted entirely, even if it is for your own personal
enjoyment. Regardless of whether such files are purchased by you or obtained for
free, posting them on a website, a file sharing site, or any other Internet site, or
otherwise distributing them to third parties without the permission of the copyright
holder is strictly prohibited by copyright laws and international treaties. For example,
uploading or distributing on the Internet images of TV programs, live concerts, music
videos, etc. that were photographed or recorded by you may infringe upon the rights
of others. Note that CASIO COMPUTER CO., LTD. shall not be held liable for use of
this product in any way that infringes on the copyrights of others or that violates
copyright laws.
The following terms, which are used in this manual, are registered trademarks or
trademarks of their respective owners.
Note that trademark ™ and registered trademark ® are not use within the text of this
manual.
• SDXC Logo is a trademark of SD-3C, LLC.
• Microsoft, Windows, Internet Explorer, Windows Media, Windows Vista,
Windows 7, and DirectX are registered trademarks or trademarks of Microsoft
Corporation in the United States and other countries.
• Macintosh, Mac OS, QuickTime, and iPhoto are trademarks of Apple Inc.
• Adobe and Reader are trademarks or registered trademarks in the United States
and other countries of Adobe Systems Incorporated.
• YouTube, the YouTube logo, and “Broadcast Yourself” are trademarks or
registered trademarks of YouTube, LLC.
• Eye-Fi and the Eye-Fi logo are trademarks of Eye-Fi, Inc.
• EXILIM, Photo Transport, Dynamic Photo, Dynamic Photo Manager, Virtual
Painter 5 LE for CASIO, and YouTube Uploader for CASIO are registered
trademarks or trademarks of CASIO COMPUTER CO., LTD.
• All other company or product names mentioned herein are registered trademarks
or trademarks of their respective companies.
117
Appendix
Any and all unauthorized commercial copying, distribution, and copying of the
bundled software over a network are prohibited.
This product contains PrKERNELv4 Real-time OS of eSOL
Co., Ltd. Copyright © 2007 eSOL Co., Ltd.
PrKERNELv4 is a registered trademark of eSOL Co., Ltd. in
Japan.
This product contains the software of FotoNation, Inc.
FotoNation is a registered trademark of FotoNation, Inc.
FaceTracker is a trademark of FotoNation, Inc.
This product’s YouTube upload functionality is included under license from YouTube,
LLC. The presence of YouTube upload functionality in this product is not an
endorsement or recommendation of the product by YouTube, LLC.
118
Appendix
Power Supply
Charging
. If the camera’s back lamp starts flashing red...
If the back lamp starts flashing red during charging, it means that further charging is
not possible for one of the reasons below. Perform the actions described below to
correct the problem and then try charging again.
Ambient temperature or the temperature of the battery is abnormally high
or low
Unplug the USB cable from the camera and wait for a while until the camera is within
the temperature range of 5°C to 35°C (41°F to 95°F), and then try charging again.
Safety timer activated
A battery that has not been used for a long time, certain types of computers, and
connection conditions can cause charging to take longer than normal. If charging
takes longer than about six hours, a safety timer will terminate it automatically, even if
the battery is not fully charged. If the battery has not been used for a very long time,
charging may terminate automatically after only about 45 minutes.
1) Using a battery that has not been used for a long time.
Disconnect and then reconnect the USB cable to resume charging.
2) Insufficient power supply when connected to computer
Connect directly to a USB port what supplies a current of 500mA.
For details about the power supply capacity of a computer’s USB port, contact the
manufacturer of the computer. Though disconnecting and then reconnecting the USB
cable will resume charging, you may need to do so repeatedly if the power supply
capacity of the computer is low.
If problems continue to occur after you perform the above steps, it could mean that
the battery is faulty. Contact your nearest CASIO authorized service center.
119
Appendix
To replace the battery
1.
Open the battery cover and remove
the current battery.
With the monitor screen side of the
camera facing upwards, slide the
stopper in the direction indicated by the
arrow in the illustration. After the battery
pops out, pull it the rest of the way out of
the camera.
2.
Stopper
Load a new battery.
Battery Precautions
. Precautions during Use
• Operation provided by a battery under cold conditions is always less than operation
under normal temperatures. This is due to the characteristics of the battery, not the
camera.
• Charge the battery in an area where the temperature is within the range of 5°C to
35°C (41°F to 95°F). Outside this temperature range charging can take longer than
normal or even fail.
• Do not tear or remove the battery outer label.
• If a battery provides only very limited operation following a full charge, it probably
means the battery has reached the end of its service life. Replace the battery with a
new one.
. Storage Precautions
• Storing the camera for a long time while it is charged can cause deterioration of
battery characteristics. If you do not plan to use a camera for some time, fully use
up its charge before storing it.
• Always remove the battery from the camera when you are not using it. A battery left
in the camera can discharge and go dead, which will require some time to charge
when you need to use the camera.
• Store batteries in a cool, dry place (20°C (68°F) or lower).
• To prevent over discharging of an unused battery, fully charge it, and then load it in
the camera and fully use up the charge about once every six months.
120
Appendix
Using the Camera in another Country
. Precautions during Use
• The bundled USB-AC adaptor is designed for operation with any power supply in
the range of 100V to 240V AC, 50/60Hz. Note, however, that the shape of the
power cord plug depends on each country or geographic area. Before taking the
camera and USB-AC adaptor along on a trip, check with travel agent about the
power supply requirements in your destination(s).
• Do not connect the USB-AC adaptor to a power supply through a voltage converter
or similar device. Doing so can lead to malfunction.
. Extra Batteries
• Taking along extra fully charged batteries (NP-110) is recommended while on a trip
in order to avoid not being able to shoot images due to the battery going dead.
Using a Memory Card
See page 23 for information about supported memory cards and how to load a
memory card.
To replace the memory card
Press the memory card and then release it. This will
cause it to pop out of the memory card slot slightly. Pull
the card out the rest of the way and then insert another
one.
• Never remove a card from the camera while the back
lamp is flashing green. Doing so can cause the image
save operation to fail and even damage the memory
card.
. Using a Memory Card
• SD memory cards, SDHC memory cards, and SDXC
Write enabled
memory cards have a write protect switch. Use the
switch when you need to guard against accidentally
deleting data. Note, however, if you write protect an SD
Write disabled
memory card you must then turn write protection off
whenever you want to record to it, format it, or delete
any of its images.
• If a memory card starts to behave abnormally during image playback, you can
restore normal operation by reformatting it (page 109). However, it is
recommended that you always take along multiple memory cards whenever using
the camera far away from the home or office.
• As you record data to and delete data from a memory card a number of times, it
loses its ability to retain data. Because of this, periodic re-formatting of a memory
card is recommended.
121
Appendix
• Electrostatic charge, electrical noise, and other phenomena can cause data to
become corrupted or even lost. Make sure that you always back up important data
on other media (CD-R, CD-RW, hard disk, etc.).
. Memory Card Handling Precautions
Certain types of memory cards can slow down processing speeds. In particular, you
may experience problems saving high-quality (HD) movies. When using the camera’s
built-in memory or certain types of memory cards, it can take too much time to record
data, which can result in breaks in the image and/or audio. This condition is indicated
by the movie icon turning yellow on the monitor screen. Use of a memory card with a
maximum transfer speed of at least 10MB per second is recommended.
. Discarding or Transferring Ownership of a Memory Card or the
Camera
• The format and delete functions of the camera do not actually delete files from the
memory card. The original data remains on the card. Note that responsibility for the
data on a memory card lies with you. The following procedures are recommended
whenever you discard a memory card or the camera, or if you transfer ownership to
another party.
– When discarding a memory card, either physically destroy the memory card or
use commercially available data delete software to completely delete the data on
the memory card.
– When transferring ownership of a memory card to another party, use
commercially available data deletion software to completely delete the data on it.
Use the format function (page 109) to completely delete the data in built-in memory
before discarding or transferring ownership of the camera.
122
Appendix
Computer System Requirements for Bundled Software
(For Windows)
Computer system requirements are different for each of the applications. Be sure to
check the requirements for the particular application you are trying to use. Note that
the values provided here are minimum requirements for running each application.
Actual requirements are greater, depending on the number of images and the sizes of
the images being handled.
YouTube Uploader for CASIO
Operating System : Windows 7, Windows Vista, Windows XP (SP3)
• Sufficient memory to run the operating system
• Computer configuration that enables playback of movies on the YouTube site
• Computer configuration that enables upload of movies to the YouTube site
Photo Transport 1.0
Operating System
: Windows 7, Windows Vista, Windows XP (SP3)
Memory
: At least 64MB
Hard Disk Drive Space : At least 2MB
Dynamic Photo Manager
Operating System
: Windows 7, Windows Vista (SP1), Windows XP (SP3)
Memory
: At least 512MB
Hard Disk Drive Space : At least 10MB
Internet Browser
: Internet Explorer 6.0 or greater or equivalent function
browser
Other
: QuickTime 7.6 or higher and Windows Media Player 10 or
higher installed.
Computer with continuous Internet connection (1Mbps or
greater)
Virtual Painter 5 LE for CASIO
Operating System : Windows 7, Windows Vista, Windows XP (SP3)
CPU
: Intel Pentium III processor or later
Memory
: At least 256MB
VIDEO
: 24-bit full color display adapter at 1024 x 768 or larger resolution
• Installation requires in as a user with Administrator privileges.
Adobe Reader 9
Operating System
: Windows 7, Windows Vista, Windows XP (SP3/SP2),
Windows 2000 (SP4)
Memory
: At least 128MB (256MB recommended)
Hard Disk Drive Space : At least 335MB
For details about the minimum system requirements for each software application,
see the “Read me” files on the CASIO Digital Camera Software CD-ROM that comes
bundled with the camera.
123
Appendix
Reset Initial Default Settings
The tables in this section show the initial default settings on menus that appear in the
REC mode and PLAY mode when you reset the camera (page 109).
• A dash (–) indicates an item whose setting is not reset or an item for which there is
no reset setting.
IMPORTANT!
• Switching from “Auto” to “Premium Auto” (page 28) will make some menu items
unavailable.
. REC Menu
Touch Shutter
On
Single SR
Quality
Off
Single SR Zoom
On
Self-timer
Off
Image Size
16M
Movie Quality
HD
EV Shift
0.0
White Balance
Auto
ISO
Auto
Lighting
On
Focus
AF
Continuous AF
Off
AF Assist Light
On
Anti Shake
On
Review
On
Setup
* Page 125
. PLAY Menu
Dynamic Photo
–
Trimming
–
Movie Converter
–
Resize
–
Protect
–
Rotation
–
Copy
–
DPOF Printing
–
Red Eye
–
Setup
* Page 125
124
Appendix
. Setup Menu
Screen
Auto
Adjust
–
Eye-Fi
On
Date Style
–
Language
–
Calibrate TP
–
Sounds
Startup: On /
Half Shutter: On /
Shutter: On /
Operation: On /
Operation: 3 /
Playback: 3
Video Out
–
Format
–
Reset
–
Version
–
Timestamp
Off
World Time
–
125
Appendix
When things don’t go right...
Troubleshooting
Problem
Possible Cause and Recommended Action
Power Supply
Power does not
turn on.
1)The battery may not be loaded correctly (page 15).
2)The battery may be dead. Charge the battery (page 16). If the
battery goes dead soon after being charged, it means the
battery has reached the end of its life and needs to be
replaced. Purchase a separately available CASIO NP-110
rechargeable lithium ion battery.
The camera
suddenly powers
down.
1)The camera is designed to turn off automatically after no
operation is performed for about five minutes. Turn power
back on.
2)The battery may be dead. Charge the battery (page 16).
3)The camera’s protection function may have activated
because camera temperature is too high. Turn off the camera
and wait until it cools down before trying to use it again.
Power will not turn
off. Nothing
happens when a
button is pressed.
Remove the battery from the camera and then reload it.
Image Recording
Image is not
recorded when the
shutter button is
pressed.
1)If the camera is in the PLAY mode, touch “g” (REC) to enter
the REC mode.
2)If the flash is charging, wait until the charge operation
finishes.
3)If the message “Memory Full” appears, transfer images to
your computer, delete images you no longer need, or use a
different memory card.
Auto Focus does
not focus properly.
1)If the lens is dirty, clean it off.
2)The subject may not be in the center of the focus frame when
you compose the image.
3)The subject you are shooting may not be a type that is
compatible with Auto Focus (page 34). Use manual focus
(page 58).
4)You may be moving the camera when shooting. Try shooting
with Anti Shake or use a tripod.
5)You may be pressing the shutter button all the way without
waiting for Auto Focus. Half-press the shutter button and
allow enough time for Auto Focus to focus.
126
Appendix
Problem
Possible Cause and Recommended Action
The subject is out
of focus in the
recorded image.
The image may not be focused properly. When composing the
image, make sure the subject is located inside the focus frame.
The flash does not
fire.
1)If ? (Flash Off) is selected as the flash mode, change to
another mode (page 42).
2)If the battery is dead, charge it (page 16).
3)If a BEST SHOT scene that uses ? (Flash Off) is selected,
change to a different flash mode (page 42) or select a
different BEST SHOT scene (page 49).
4) ? (Flash Off) is selected automatically when shooting with
HDR, HDR Art, or Slide Panorama.
The ? (Flash Off)
icon flashes red on
the monitor screen
and the flash does
not fire.
The flash unit may be malfunctioning. Contact a CASIO
authorized service center or your original retailer. Note that
though the flash will not fire, you still can use the camera for
non-flash shots.
Camera powers
down during Selftimer countdown.
The battery may be dead. Charge the battery (page 16).
The monitor screen 1)You may be using Manual Focus and have not focused the
image is out of
image. Focus the image (page 59).
focus.
2)You may be using “Macro” for scenery or portraits. Use Auto
Focus for scenery and portrait shots (page 58).
There is a vertical
line in the monitor
screen image.
Shooting a very brightly lit subject can cause a vertical band to
appear in the monitor screen image. This is a CCD
phenomenon known as “vertical smear”, and does not indicate
malfunction of the camera. Note that vertical smear is not
recorded with the image in the case of a snapshot, but it is
recorded in the case of a movie.
There is digital
noise in images.
1)Sensitivity may have been increased automatically for a dark
subject, which increases the chance of digital noise. Use a
light or some other means to illuminate the subject.
2)You may be attempting to shoot in a dark location with ?
(Flash Off) selected, which can increase digital noise and
make images appear coarse. In this case, turn on flash (page
42) or use lights for illumination.
3)Shooting with a high ISO sensitivity setting or with the
Lighting feature can cause an increase in digital noise. Use a
light or some other means to illuminate the subject.
127
Appendix
Problem
Possible Cause and Recommended Action
A recorded image
was not saved.
1)Camera power may have been turned off before the save
operation was complete, which will result in the image not
being saved. If the battery indicator shows
, charge the
battery as soon as possible (page 20).
2)You may have removed the memory card from the camera
before the save operation was complete, which will result in
the image not being saved. Do not remove the memory card
before the save operation is complete.
Though available
lighting is bright,
the faces of people
in the image are
dark.
Not enough light is reaching the subjects. Change the flash
mode setting to < (Flash On) for daylight synchro flash (page
42), or adjust EV shift to the + side (page 55).
Night shots come
out bad.
Use the “Night Scene” BEST SHOT scene (page 49) when
shooting at night.
Subjects are too
dark when shooting
images in a
seashore or ski
area.
Sunlight reflected by water, sand, or snow, can cause
underexposure of images. Change the flash mode setting to <
(Flash On) for daylight synchro flash (page 42), or adjust EV
shift to the + side (page 55).
Digital zoom
(including HD
zoom and Single
SR Zoom) does not
work. The zoom
bar indicates zoom
only up to a zoom
factor of 8.0.
Date stamping may be turned on, which will cause digital zoom
to be disabled. Turn off date stamping (page 104).
The image is out of
focus during movie
recording.
1)Focusing may not be possible because the subject is outside
the focus range. Shoot within the allowable range.
2)The lens may be dirty. Clean the lens (page 115).
128
Appendix
Problem
Possible Cause and Recommended Action
Playback
The color of the
playback image is
different from what
appears on the
monitor screen
when shooting.
Sunlight or light from another source may be shining directly
into the lens when you are shooting. Position the camera so
sunlight does not shine directly into the lens.
Images are not
displayed.
This camera cannot display non-DCF images recorded onto a
memory card using another digital camera.
Images cannot be
edited (with
resizing, trimming,
rotation).
Note that you cannot edit the following types of snapshots.
• Movies
• Panorama Image
• Snapshots recorded with another camera
File Deletion
A file cannot be
deleted.
The file may be protected. Unprotect the file (page 71).
Other
The wrong date
and time are
displayed, or the
wrong date and
time are being
stored along with
image data.
The date and time setting is off. Set the correct date and time
(page 106).
The messages on
the display are in
the wrong
language.
The wrong display language is selected. Change the display
language setting (page 107).
Images cannot be
transferred over a
USB connection.
1)The USB cable may not be connected securely. Check all
connections.
2)If the camera is not turned on, turn it on.
3)Your computer may not be able to recognize the camera if
you connect via a USB hub. Always connect directly to the
computer’s USB port.
129
Appendix
Problem
Possible Cause and Recommended Action
Language selection 1)You did not configure initial settings after purchasing the
screen appears
camera or the camera may have been left with a dead
when the camera is
battery. Check the camera setup (pages 20, 21).
turned on.
2)There may be a problem with the camera’s memory data. If
this is the case, perform the reset operation to initialize the
camera’s setup (page 109). After that, configure each setting.
If the language selection screen does not re-appear when you
turn the camera on, it means that the camera’s memory
management data has been restored.
If the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.
B
The time and date
settings configured
the first time after
purchasing the
camera are reset to
their factory
defaults when
remove the
camera’s battery.
Load the camera’s battery and reconfigure the time and date
settings (page 21). Do not remove the battery from the camera
for at least 24 hours after configuring time and date settings.
After that, the settings will not be reset if you remove the
battery.
• If the time and date are reset to their factory default settings
when you remove the battery after it has been loaded for
more than 24 hours, it could mean that the camera’s setting
memory is defective. Contact your retailer or a CASIO
authorized service center.
Buttons are not
responsive right
after the power has
been turned on.
With large capacity memory cards there is a delay after the
power has been turned on before the buttons become
responsive.
The camera
records images I
didn’t shoot or the
camera shoots an
image whenever I
touch the monitor
screen.
Touch Shutter (page 51) is turned on. While Touch Shutter is
turned on, take care that you do not touch the monitor screen
while carrying the camera and avoid touching the monitor
screen except when shooting an image or performing some
other operation. If you do not want to use Touch Shutter, turn it
off (page 51).
130
Appendix
Display Messages
ALERT
The camera’s protection function may have activated
because camera temperature is too high. Turn off the
camera and wait until it cools down before trying to use it
again.
Battery is low.
Battery power is low.
There is something wrong with the memory card. Turn off the
camera, remove the memory card and then reload it into the
camera. If this message re-appears when you turn the
camera back on, format the memory card (page 109).
Card ERROR
IMPORTANT!
• Formatting a memory card deletes all its files. Before
formatting, try transferring recoverable files to a computer
or some other storage device.
Files could not be
saved because
battery is low.
Battery power is low, so an image file could not be saved.
Folder cannot be
created.
You are trying to record a file while there are already 9999
files stored in the 999th folder. If you want to record more,
delete files you no longer need (page 33).
Images are being
uploaded.
Please wait.
You are attempting to turn off power while image data is
being transferred using the Eye-Fi card (page 99).
LENS ERROR
This message appears and the camera turns off whenever
lens performs some unexpected operation. If the same
message appears after you turn power back on, contact a
CASIO authorized service center or your original retailer.
LENS ERROR 2
The Camera Shake unit may be malfunctioning. If the same
message appears after you turn power back on, contact your
retailer or a CASIO authorized service center.
131
Appendix
Memory Full
Memory is full with images you recorded and/or files saved
by editing operations. Delete files you no longer need (page
33).
Record Error
Image compression could not be performed for some reason
during image data storage. Shoot the image again.
RETRY POWER ON
The lens came into contact with an obstruction while moving.
The camera will turn off automatically when this message
appears. Remove the obstruction and turn power back on
again.
SYSTEM ERROR
Your camera system is corrupted. Contact your retailer or a
CASIO authorized service center.
The LOCK switch of the SD, SDHC, or SDXC
memory card loaded in the camera is in the
The card is locked. locked position. You cannot store images to
or delete images from a memory card that is
locked.
LOCK
There are no files.
There are no files in built-in memory or on the memory card.
This card is not
formatted.
The memory card loaded in the camera is not formatted.
Format the memory card (page 109).
This file cannot be
played.
The file you are trying to access is corrupted or is a type that
cannot be displayed by this camera.
This function
cannot be used.
This message will appear part way through an operation
when you attempt to use a function that is not allowed in
combination with another function.
132
Appendix
Number of Snapshots/Movie Recording Time
Snapshot
Image Size (Pixels)
Approximate
Image File Size
Built-in Memory
(Approx. 34.9MB*1) Snapshot
Recording Capacity
SD Memory Card
(1GB*2) Snapshot
Recording Capacity
16M (4608x3456)
5.57 MB
6
173
3:2 (4608x3072)
4.92 MB
7
196
5M (2560x1920)
1.72 MB
20
562
3M (2048x1536)*3
1.25 MB
28
773
290 KB
122
3334
VGA (640x480)
Movies
Image Quality
(Pixels) /
(Audio)
Approximate Data Rate
(Frame Rate)
Built-in Memory
(Approx. 34.9MB*1)
Movie Recording
Capacity
SD Memory Card
(1GB*2) Movie
Recording
Capacity
File Size of
1-minute
Movie
HD
(1280x720)
(Monaural)
25.2 Megabits/second
(24 frames/second)
11 seconds
5 minutes
14 seconds
189.0 MB
STD
(640x480)
(Monaural)
12.2 Megabits/second
(30 frames/second)
23 seconds
10 minutes
49 seconds
91.5 MB
*1 Built-in memory capacity after formatting
*2 The above values are based on use of a PRO HIGH SPEED SD memory card
(Panasonic Corporation). The number of images you can save depends on the type of
memory card you are using.
*3 The Image Size is fixed at 3M when shooting with HDR and HDR Art only.
• Snapshot and movie recording capacity values are approximate and intended for
reference only. Actual capacity depends on image contents.
• File size and data rate values are approximate and intended for reference only. Actual
values depend on the type of image being shot.
• When using a memory card with a different capacity, calculate the number of images as a
percentage of 1GB.
• Each movie can be up to 29 minutes long. Movie recording stops automatically after
29 minutes of recording.
B
133
Appendix
Specifications
File Format
Snapshots:
JPEG (Exif Version 2.3); DCF 2.0 standard; DPOF compliant
Movies:
Motion JPEG AVI, IMA-ADPCM audio (monaural)
Recording Media
Built-in Memory (Image Storage Area: 34.9MB*)
SD/SDHC/SDXC
* Built-in memory capacity after formatting
Recorded Image Sizes
Snapshot:
16M (4608x3456), 3:2 (4608x3072), 5M (2560x1920),
VGA (640x480)
Movies:
HD (1280x720), STD (640x480)
Image Deletion
1 file; all files (with memory protection feature)
Effective Pixels
16.10 Megapixels
Imaging Element
Size: 1/2.3-inch square pixel CCD
Total Pixels: 16.57 Megapixels
Lens/Focal Distance
F3.3 (W) to 5.9 (T) f = 4.4 to 35.2 mm
(equivalent to 25 to 200 mm in 35 mm format)
Ten lenses in eight groups, including aspherical lens.
Zoom
8.0X Optical zoom, 12.0X in combination with Single SR Zoom
4.0X Digital zoom
Up to 127.5X when HD Zoom and Digital zoom are used in
combination (VGA size)
Focusing
Contrast Detection Auto Focus
• Focus Modes:
Auto Focus, Macro Focus, Super Macro Focus, Manual
Focus
• AF Area:
Spot with AF assist lamp
* Intelligent AF area used when Premium Auto is selected.
Approximate Focus
(Snapshot)
(From Lens Surface)
Auto Focus: 5 cm to 9 (2.0" to 9) (Wide Angle)
Macro Focus: 2 cm to 50 cm (0.8" to 19.7") (Seventh step
zoom from the Widest Angle setting)
Super Macro Focus: 2 cm to 50 cm (0.8" to 19.7")
Manual: 5 cm to 9 (2.0" to 9) (Wide Angle)
* Range is affected by optical zoom.
Metering
Multi-pattern by imaging element
Exposure Control
Program AE
134
Appendix
Exposure
Compensation
–2.0 EV to +2.0 EV (in 1/3EV steps)
Shutter
CCD shutter, mechanical shutter
Shutter Speed
Snapshot (Auto): 1/2 to 1/2000 second
Snapshot (Premium Auto): 4 to 1/2000 second
* May differ due to the camera setup.
Aperture Value
F3.3 (W) to F8.0 (W) (When used with ND filter)
* Using optical zoom changes the aperture value.
White Balance
Auto, Daylight, Overcast, Shade, Day White Fluorescent,
Daylight Fluorescent, Tungsten, Manual WB
Sensitivity (Standard
Output Sensitivity)
Snapshots:
Auto, ISO 80, ISO 100, ISO 200, ISO 400, ISO 800,
ISO 1600, ISO 3200 equivalent
Movies: Auto
Self-timer
Approximate Trigger Times:
10 seconds, 2 seconds
Flash Modes
Auto, Off, On, Red-eye reduction
Flash Range (ISO
Sensitivity: Auto)
Normal:
0.4 m to 3.9 m (1.3' to 12.8') (Wide Angle)
0.8 m to 2.2 m (2.6' to 7.2') (Telephoto)
* Range is affected by optical zoom.
Flash Charging Time
Approximately 4 seconds maximum
Recording
Snapshots (Auto, Premium Auto, BEST SHOT, HDR, HDR Art
(One of three levels can be selected.), Slide Panorama),
Single SR Quality; Single SR Zoom, Macro, Self-timer,
Touch Shutter, Face Detection, Movies (STD, HD) (with
monaural audio)
Monitor Screen
3.2-inch TFT color LCD (Super Clear LCD)
460,800 (960x480) dots
Touch Screen
Viewfinder
Monitor Screen
Timekeeping Function
Built-in quartz digital clock
Date and Time: Recorded with image data
Auto Calendar: To 2049
World Time
162 cities in 32 time zones
City name, date, time, summer time
External connection
terminal
USB port (Hi-Speed USB compatible, USB charging) /
AV output terminal (NTSC/PAL)
Microphone
Monaural
Speaker
Monaural
Power Requirements
Rechargeable lithium ion battery (NP-110) x1
135
Appendix
Approximate Battery Life
All of the values provided below represent the approximate amount of time under
normal temperature (23°C (73°F)) before the camera turns off. These values are not
guaranteed. Low temperatures shorten battery life.
Number of Shots (CIPA) (Operating Time)*1
Continuous Playback
(Snapshots)*2
560 shots
6 hours 00 minutes
Approximate continuous movie recording time*3
4 hours 00 minutes
• Battery: NP-110 (Rated Capacity: 1200 mAh)
• Recording Medium: 1GB SD memory card (PRO HIGH SPEED (Panasonic
Corporation))
• Measurement Conditions
*1 Approximate number of shots (CIPA) (Operating Time)
In accordance with CIPA (Camera and Imaging Products Association) standards
Normal temperature (23°C (73°F)), monitor on, zoom operation between full wide and
full telephoto every 30 seconds, during which two images are shot with flash; power
turned off and back on every time 10 images are shot.
*2 Approximate playback time
Standard temperature (23°C (73°F)), one-image scroll approximately every 10 seconds
*3 Approximate time using a 16GB SDHC memory card for a repeated cycle of 10 minutes
recording followed by deletion of the recorded file.
• The above values are based a new battery, starting from a full charge. Repeated
charging shortens battery life.
• Frequency of flash, zoom, and Auto Focus usage, and the time the camera is on
greatly affects recording time and number of shots values.
Power Consumption
3.7 V DC, Approximately 3.2 W
Dimensions
97.0 (W) x 56.6 (H) x 22.6 (D) mm
(3.8" (W) x 2.2" (H) x 0.9" (D))
(18.8 mm (0.74") thick excluding projections)
Weight
148 g (5.2 oz) (including battery and memory card)
121 g (4.3 oz) (excluding battery and memory card)
B
136
Appendix
. Rechargeable lithium ion battery (NP-110)
Rated Voltage
3.7 V
Rated Capacitance
1200 mAh
Operating Temperature
Requirements
0 to 40°C (32 to 104°F)
Dimensions
37.5 (W) x 44.9 (H) x 7.0 (D) mm
(1.48" (W) x 1.77" (H) x 0.28" (D)) (excluding projections)
Weight
Approximately 25 g (0.9 oz)
. USB-AC adaptor (AD-C53U)
Input Power
100 to 240 V AC, 50/60 Hz, 100 mA
Output Power
5.0 V DC, 650 mA
Operating Temperature
Requirements
5 to 35°C (41 to 95°F)
Dimensions
53 (W) x 21 (H) x 45 (D) mm
(2.1" (W) x 0.83" (H) x 1.8" (D)) (excluding projections)
Weight
Approximately 37 g (1.3 oz)
• Power cord precautions for use in Singapore
The power cord set is not supplied. The power cord used must comply with
relevant national and/or international standards.
137
Appendix
CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
M29
MA1105-B
E
Getting the Most Out of Dynamic Photo
For a wealth of information about Dynamic Photo including
explanations about how to use Dynamic Photo images, the Dynamic
Studio image conversion service, sample images, and more, visit the
special Dynamic Photo website at:
http://dp.exilim.com/
This manual provides an introduction to Dynamic Photo, which creates a whole new
way to enjoy digital imaging.
• All screen shots shown in this manual are in English. However, the camera allows
you to select another display language, if you want.
Contents
Dynamic Photo! A totally new way to enjoy digital photography!........................... 2
Creating a Dynamic Photo Image ............................................................................... 3
Step 1: Shoot the image into which you want to insert an built-in subject. ............................... 3
Step 2: Create the Dynamic Photo image. ............................................................................. 3
Step 3: Have fun with Dynamic Photo. ................................................................................... 6
Step 4: Convert a Dynamic Photo Still Image to a Movie (Movie Converter). .......................... 6
Step 5: Use Dynamic Studio to expand use of Dynamic Photo images to other applications. .. 7
Dynamic Photo! A totally new way to enjoy digital
photography!
Dynamic Photo provides an easy way to insert built-in subjects into snapshots and
movies for a whole new way to enjoy digital imaging.
You can create a Dynamic Photo image by inserting a built-in moving subject into a
background image (snapshot or movie). Before performing the following steps, you
should record the background image (snapshot or movie) into which you want to
insert the moving subject.
• The term “built-in subjects” refers to the moving figures and characters that came
pre-programmed in the camera’s built-in memory.
Background Image
B
Built-in Subject
Dynamic Photo Image
2
Dynamic Photo! A totally new way to enjoy digital
photography!
Creating a Dynamic Photo Image
Your digital camera comes with a number of subjects in its built-in memory (“built-in
subjects”). You can use these built-in subjects to create Dynamic Photo images by
inserting them into your original snapshots or movies.
Step 1: Shoot the image into which you want to insert
an built-in subject.
1. In the REC mode, compose the image and press
the shutter button to shoot a standard
snapshot.
You will insert the built-in subject into the snapshot you
shoot here.
Step 2: Create the Dynamic Photo image.
Now simply insert a built-in subject into the snapshot or movie you shot in step 1 to
create your own original Dynamic Photo image.
1. Press [p] (PLAY) or touch “f” (PLAY) to
enter the PLAY mode.
2. Touch “MENU” and then “Dynamic Photo”.
• If “MENU” is not displayed on the screen, touch the
tab to display it.
3. Touch “ú” or “õ” or drag left or right to select
the background image, and then touch “OK”.
Select the image you want to use as the background.
Here, select the image you recorded in step 1 of this
procedure.
* Only images that are able to be used as background
images will appear for selection at this time.
• Only an image that satisfies the following conditions can be used as a
background image.
– A snapshot or movie recorded with this camera or a snapshot transferred to
this camera’s memory using Photo Transport
– A snapshot with an aspect ratio of 4:3
B
3
Creating a Dynamic Photo Image
4. Touch “ú” or “õ” or drag left or right to select
the built-in subject sample you want to insert,
and then touch “OK”.
* Only built-in subjects that can be inserted into other images
will appear at this time.
5. If you are inserting a subject into a movie, use
“y” and “z” to configure the time zone in
the movie where you want the subject to
appear, and then touch “OK”.
• If you insert a subject into a movie, the resulting
movie will be a maximum of 20 seconds long.
Everything before and after the insertion is cut off.
Insert location
If the movie you are inserting into (original movie)
is shorter than 20 seconds, the resulting movie will
be the same length as the original movie.
• If you are inserting a subject into a snapshot, skip directly to step 6.
6. Use the zoom controller to adjust the size of
the subject and drag the subject to change its
location on the screen, and then touch “OK”.
This inserts the subject into another image and
creates a Dynamic Photo.
7. After creation of the Dynamic Photo image is
complete, the finished image will appear on the
monitor screen.
B
4
Creating a Dynamic Photo Image
Complete!
• Inserting a built-in subject into a snapshot will save a Dynamic Photo that consists
of 20 still images of 2M size or smaller.
• Inserting a built-in subject into a movie will save the Dynamic Photo as a movie file.
Important!
• Performing a delete or format operation will not delete the built-in subjects.
5
Creating a Dynamic Photo Image
Step 3: Have fun with Dynamic Photo.
You can use the Dynamic Photo image you created in Step 2 in a variety of fun ways.
On the camera
Dynamic Photo images play back automatically
as soon as you display them on the EXILIM
monitor screen.
On a TV
Connect your EXILIM to a TV with the AV
cable and you can enjoy watching Dynamic
Photo images on your TV screen.
Step 4: Convert a Dynamic Photo Still Image to a Movie
(Movie Converter).
A Dynamic Photo with a still image background and a moving subject is stored as a
series of 20 still images. You can use the following procedure to convert the
20 images that make up a Dynamic Photo to a movie.
1. Press [p] (PLAY) or touch “f” (PLAY) to enter
the PLAY mode.
2. Drag left or right to display the Dynamic Photo
you want to convert to a movie.
3. Touch “MENU”.
4. Touch “Movie Converter”.
• The final movie format is Motion JPEG.
• The final movie image size is 640x480 pixels.
5. Save the converted Dynamic Photo to your
computer.
B
6
Creating a Dynamic Photo Image
Step 5: Use Dynamic Studio to expand use of Dynamic Photo
images to other applications.
http://dynamicstudio.jp/
Using the CASIO EXILIM Dynamic Photo feature to create a Dynamic Photo image
with a moving subject produces a CS image that reproduces the movement of the
character. Dynamic Studio is a free online service that lets you convert the CS image
to a movie file for playback on a PC, digital photo frame, cell phone, or other device.
Now you can enjoy your Dynamic Photo images on a virtually unlimited number of
different devices.
* Dynamic Studio service availability and content are subject to change without notice.
On a PC
In a digital photo
frame
Enjoy watching Dynamic
Photo images on your PC
screen.
Play Dynamic Photo images
in a digital photo frame.
On a cell phone
Share with your friends
View Dynamic Photo images on your cell phone
screen.
Send the Dynamic Studio
URL to your friends and share
your Dynamic Photo
creations with them.
e-Greeting Cards
For presentations
Send animated e-greeting cards to your special
friends and family members.
Animation GIF files can be
included in presentation data for
an impression that really lasts.
MA1105-B 1158
7
Creating a Dynamic Photo Image
Download PDF