DSC | Envoy NT9010 | Installation guide | DSC Envoy NT9010 Installation guide

WARNING
This manual contains information on
limitations regarding product use and
function and information on the
limitations as to liability of the
manufacturer. The entire manual should
be carefully read.
NT9010
v1.0
Programming
Worksheets
™
Ta b l e o f C o n t e n t s
Section 1: Basic Programming
1
Account Information ................................................ 1
Zone Summary......................................................... 1
Central Station Telephone Number .......................... 1
NT9010 Account Code............................................. 1
Section 2: Advanced Programming
2
Zone Definitions....................................................... 2
System Times and Codes.......................................... 2
Zone Attributes ........................................................ 5
System Timers .......................................................... 6
Section 3: Advanced Communicator
Programming
7
Telephone Numbers ................................................. 7
Account Codes ........................................................ 7
Reporting Codes ...................................................... 7
[360] Communicator Format Options ..................... 10
Call Direction Options ............................................ 11
[370] Communication Variables ............................. 12
Section 4: Downloading Options
13
Section 5: International Programming
14
Section 6: Talk/Listen-in Programming
15
[802] Audio Interface Programming ....................... 15
Section 7: Wireless Receiver Programming
18
[804] Wireless Receiver Programming..................... 18
Wireless Key Function Button Options .................... 19
Zone Supervision.................................................... 20
Section 8: Function Keys, Voice Prompt Interface,
and Special Zone Programming
22
[807] Voice Prompt Interface Programming ............ 22
Programming the System and Zone Labels ............. 24
Section 9: Special Installer Functions
26
Appendix A: Audio Label Library
27
L i m i t e d Wa r r a n t y
Digital Security Controls Ltd. warrants the original purchaser that for a period of
twelve months from the date of purchase, the product shall be free of defects in
materials and workmanship under normal use. During the warranty period, Digital
Security Controls Ltd. shall, at its option, repair or replace any defective product
upon return of the product to its factory, at no charge for labour and materials. Any
replacement and/or repaired parts are warranted for the remainder of the original
warranty or ninety (90) days, whichever is longer. The original owner must
promptly notify Digital Security Controls Ltd. in writing that there is defect in
material or workmanship, such written notice to be received in all events prior to
expiration of the warranty period.
I n t e rn a t i o n a l Wa r r a n t y
The warranty for international customers is the same as for any customer within
Canada and the United States, with the exception that Digital Security Controls
Ltd. shall not be responsible for any customs fees, taxes, or VAT that may be due.
Wa r r a nt y P ro c e d u re
To obtain service under this warranty, please return the item(s) in question to the
point of purchase. All authorized distributors and dealers have a warranty program.
Anyone returning goods to Digital Security Controls Ltd. must first obtain an
authorization number. Digital Security Controls Ltd. will not accept any shipment
whatsoever for which prior authorization has not been obtained.
C o n d i t i o n s t o Vo i d Wa r r a n t y
This warranty applies only to defects in parts and workmanship relating to normal
use. It does not cover:
•damage incurred in shipping or handling;
•damage caused by disaster such as fire, flood, wind, earthquake or lightning;
•damage due to causes beyond the control of Digital Security Controls Ltd. such as
excessive voltage, mechanical shock or water damage;
•damage caused by unauthorized attachment, alterations, modifications or foreign
objects;
•damage caused by peripherals (unless such peripherals were supplied by Digital
Security Controls Ltd.);
•defects caused by failure to provide a suitable installation environment for the
products;
•damage caused by use of the products for purposes other than those for which it
was designed;
•damage from improper maintenance;
•damage arising out of any other abuse, mishandling or improper application of the
products.
Digital Security Controls Ltd.’s liability for failure to repair the product under this
warranty after a reasonable number of attempts will be limited to a replacement of
the product, as the exclusive remedy for breach of warranty. Under no circum-
stances shall Digital Security Controls Ltd. be liable for any special, incidental, or
consequential damages based upon breach of warranty, breach of contract, negligence, strict liability, or any other legal theory. Such damages include, but are not
limited to, loss of profits, loss of the product or any associated equipment, cost of
capital, cost of substitute or replacement equipment, facilities or services, down
time, purchaser’s time, the claims of third parties, including customers, and injury
to property.
D i s c l a i m er o f Wa r r a n t i es
This warranty contains the entire warranty and shall be in lieu of any and all other
warranties, whether expressed or implied (including all implied warranties of merchantability or fitness for a particular purpose) And of all other obligations or liabilities on the part of Digital Security Controls Ltd. Digital Security Controls Ltd.
neither assumes nor authorizes any other person purporting to act on its behalf to
modify or to change this warranty, nor to assume for it any other warranty or liability concerning this product.
This disclaimer of warranties and limited warranty are governed by the laws of the
province of Ontario, Canada.
WARNING: Digital Security Controls Ltd. recommends that the entire system be
completely tested on a regular basis. However, despite frequent testing, and due to,
but not limited to, criminal tampering or electrical disruption, it is possible for this
product to fail to perform as expected.
In s t a l l e r ’s L o c ko u t
Any products returned to DSC which have the Installer’s Lockout option enabled
and exhibit no other problems will be subject to a service charge.
O u t o f Wa r r a n t y R e p a i r s
Digital Security Controls Ltd. will at its option repair or replace out-of-warranty
products which are returned to its factory according to the following conditions.
Anyone returning goods to Digital Security Controls Ltd. must first obtain an
authorization number. Digital Security Controls Ltd. will not accept any shipment
whatsoever for which prior authorization has not been obtained.
Products which Digital Security Controls Ltd. determines to be repairable will be
repaired and returned. A set fee which Digital Security Controls Ltd. has predetermined and which may be revised from time to time, will be charged for each unit
repaired.
Products which Digital Security Controls Ltd. determines not to be repairable will
be replaced by the nearest equivalent product available at that time. The current
market price of the replacement product will be charged for each replacement unit.
Products which Digital Security Controls Ltd. determines not to be repairable will
be replaced by the nearest equivalent product available at that time. The current
market price of the replacement product will be charged for each replacement unit.
Section 1: Basic Programming
If you are programming the system using the Flash Programming, record your programming choices here.
If you need to perform more advanced programming, record your choices in the space provided in the rest of this
booklet.
Account Information
Customer: ____________________________________________________________________________________
Address: ______________________________________________________________________________________
Telephone: __________________________________________ Installation Date: __________________________
Installer’s Code:_________________________________________________________________________________
Zone Summary
Use this area to record a summary of your zone set up. You can use the NT9010 Flash Programming to enroll
zones and program zone labels. You can perform more advanced zone programming in programming sections
[001] - [004] and [101] - [132].
Zone
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Serial Number
Label
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
Zone
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Serial Number
Label
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
I_____I_____I_____I_____I_____I_____I
I_________________________________________________I
Central Station Telephone Number
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I
NT9010 Account Code
I_____I_____I_____I_____I
1
Section 2: Advanced Programming
Zone Definitions
00
01
02
03
04
05
06
07
08
09
Null Zone (Not Used)
Delay 1
Delay 2
Instant
Interior
Interior, Stay/Away
Delay, Stay/Away
For future use
For future use
For future use
10
11
12
13
14
15
16
17
18
19
24 Hour Supervisory Buzzer
24 Hour Burglary
24 Hour Holdup
24 Hour Gas
24 Hour Heating (N/C zone)
24 Hour Medical
24 Hour Panic
24 Hour Emergency
24 Hour Sprinkler
24 Hour Water
20
21
22
23
24
25
87
88
24 Hour Freeze
24 Hour Latching Tamper
Momentary Keyswitch Arm
Maintained Keyswitch Arm
For future use
Interior Delay
Delay 24 Hour Fire (Wireless)
Standard 24 Hour Fire (Wireless)
NOTE:
You can also program zone definitions using the NT9010 Flash Programming.
NOTE:
Zone Attributes are assigned in sections [101] - [132].
Zone
Defn.
Section #
Zone #
Default
I_____I_____I
[003]
17
18
19
20
21
22
23
24
00
00
00
00
00
00
00
00
I_____I_____I
25
26
00
00
00
I_____I_____I
27
00
I_____I_____I
00
I_____I_____I
28
00
I_____I_____I
00
I_____I_____I
29
00
I_____I_____I
00
I_____I_____I
30
00
I_____I_____I
00
I_____I_____I
31
00
I_____I_____I
00
I_____I_____I
32
00
I_____I_____I
Section #
Zone #
Default
[001]
01
02
03
04
05
06
07
08
01
03
03
03
04
04
04
04
09
10
00
00
11
12
13
14
15
16
[002]
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
[004]
System Times and Codes
NOTE:
A 2-second steady tone indicates an invalid entry or selection.
[005] System Times]
Default
2
Valid entries: [001-255]
030
I_______I_______I_______I
Entry Delay 1 (in seconds)
045
I_______I_______I_______I
Entry Delay 2 (in seconds)
(2.2.7 “Entry and Exit Delay Options” on page 25••)
120
I_______I_______I_______I
Exit Delay (in seconds)
(2.2.7 “Entry and Exit Delay Options” on page 25••)
004
I_______I_______I_______I
Bell Cut-off (in minutes)
(2.2.8 “Bell Options” on page 26••)
(2.2.7 “Entry and Exit Delay Options” on page 25••)
••Refer to section xx and page xx in the Installation Guide.
Zone
Defn.
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
S ec t i o n 2 : A d v a n c ed P ro g ra m m i n g
[006] Installer’s Code (2.2.2 “Access Codes” on page 20••)
Default:
5555
I_______I_______I_______I_______I
[007] Master Code (2.2.2 “Access Codes” on page 20••)
Default:
1234
I_______I_______I_______I_______I
[008] Maintenance Code (2.2.2 “Access Codes” on page 20••)
NOTE:
Default:
Valid codes are 0000-9999. Enter AAAA to disable maintenance code.
AAAA
I_______I_______I_______I_______I
[012] Keypad Lockout Options (2.2.13 “Keypad Options” on page 34••)
NOTE:
If Keypad Lockout is active, the panel cannot be disarmed with a keyswitch.
Default
000
I_______I_______I_______I
Number of Invalid Codes Before Lockout (001-255 codes)
000
I_______I_______I_______I
Lockout Duration (001-255 minutes)
[013] First System Option Code
Default
Option ON
OFF
Section/
Page #••
OFF
I________I
1
OFF
I________I
2-3
OFF
I________I
4
Tampers/Faults Do Not Sound as Open
OFF
I________I
5
For future use
ON
I________I
6
Audible Exit Fault Enabled
ON
I________I
7
Event Buffer Follows Swinger Shutdown Event Buffer Logs Events Past shutdown
2.3.17 / 53
ON
I________I
8
Temporal Three Fire Signal Enabled**
2.2.8 / 26
Hardwired Zones are Normally Closed
Hardwired Zones use End-of-Line Resistors
1.2.5 / 6
Tampers/Faults Sound as Open
2.2.9 / 27
For future use
Audible Exit Fault Disabled
Standard Pulsed Fire Signal
2.2.7 / 25
**The Temporal Three Fire Signal option must be used for Household Fire installations.
[014] Second System Option Code
Default
Option ON
OFF
Section/
Page #••
Arm / Disarm Bell Squawk disabled
2.2.5 / 24
OFF
I________I
1
Arm / Disarm Bell Squawk enabled
OFF
I________I
2
Bell Squawk During Auto Arm
No Bell Squawk During Auto Arm
2.2.7 / 25
OFF
I________I
3
Bell Squawk On Exit Delay
No Bell Squawk On Exit Delay
2.2.7 / 25
OFF
I________I
4
Bell Squawk On Entry Delay
No Bell Squawk On Entry Delay
2.2.7 / 25
OFF
I________I
5
Bell Squawk On Trouble
No Bell Squawk On Trouble
2.2.9 / 27
ON
I________I
6
Audible Exit with Urgency
Silent Exit Delay
2.2.7 / 25
OFF
I________I
7
Exit Delay Termination Enabled
Exit Delay Termination Disabled
2.2.7 / 25
OFF
I________I
8
Fire Bell is Continuous
Fire Bell Follows Bell Cut-off
2.2.8 / 26
••Refer to section xx and page xx in the Installation Guide.
3
Programming Worksheets
[015] Third System Option Code
Default
Option ON
OFF
Section/
Page #••
ON
I________I
1
Fire Keys Enabled
Fire Keys Disabled
2.2.12 / 33
OFF
I________I
2
Panic Keys Audible (Bell / Beeps)
Panic Keys Silent
2.2.12 / 33
ON
I________I
3
Quick Exit Enabled
Quick Exit Disabled
2.2.9 / 27
Quick Arming Disabled/Function keys
require code
2.2.9 / 27
ON
I________I
4
Quick Arming Enabled/Function keys do
not require code
OFF*
I________I
5
Code Required For Bypassing
No Code Required
2.2.9 / 27
OFF
I________I
6
Master Code Not Changeable
Master Code Changeable
2.2.2 / 20
ON
I________I
7
TLM Enabled
TLM Disabled
2.3.15 / 52
OFF
I________I
8
TLM Audible (Bell) When Armed
TLM Trouble Beeps When Armed
2.3.15 / 52
*If option [5] is ON, function keys programmed as [08] Bypass will require an access code when used, even if option [4] is also
on.
[016] Fourth System Option Code
Default
Option ON
OFF
Section/
Page #••
Keypad Active Always
2.2.14 / 35
OFF
I________I
1-2
OFF
I________I
3
Blank Keypad When Not Used
OFF
I________I
4
Code Required to Remove Kypd Blanking No Code Required
2.2.14 / 35
ON
I________I
5
Keypad Backlighting is enabled
2.2.14 / 35
OFF
I________I
6
For future use
OFF
I________I
7
Bypass Status Displayed While Armed
OFF
I________I
8
For future use
For future use
Keypad Backlighting is disabled
Bypass Status Not Displayed While Armed 2.2.14 / 35
[017] Fifth System Option Code
Default
OFF
Section/
Page #••
ON
I________I
1
WLS Key Does Not Use Access Codes
WLS Key Uses Access Codes
2.2.5 / 24
ON
I________I
2
Verbal Chime is Enabled
Verbal Chime is Disabled (Beeps Only)
2.2.3 / 22
ON
I________I
3
Verbal Alarm is Enabled
Verbal Alarm is Disabled (Siren Only)
2.2.3 / 22
ON *
I________I
4
Local Annunciation is Enabled
Local Annunciation is Disabled
1.2.4 / 5
OFF
I________I
5
Remote Annunciation is Enabled
Remote Annunciation is Disabled
1.2.4 / 5
OFF
I________I
6
For future use
OFF
I________I
7
For future use
OFF
I________I
8
Squawk on Away Arming/Disarming Only Bell Squawk on All Arming/Disarming
NOTE:
4
Option ON
All programming should be done with local annunciation enabled.
••Refer to section xx and page xx in the Installation Guide.
2.2.5 / 24
S ec t i o n 2 : A d v a n c ed P ro g ra m m i n g
Zone Attributes
(2.3.2 “Zone Attributes” on page 38••)
Zone Attribute Defaults (Y = Option ON; N = Option OFF):
Attribute:
1
ON Audible
OFF Silent
2
3
4
5
6
7
8
Steady
Pulsed
Chime
No
Bypass
No
Force
No
Swing
No
Tx. Delay
No
Wireless Zn.
No
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
Y
Y
Y
Y
Y
Y
Y
N
N
Y
N
N
N
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
N
N
N
N
N
N
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
N
N
N
N
Y
Y
Y
Y
Y
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
Y
Y
Y
Chime
No
Bypass
No
Force*
No
Swing
No
Tx.
Delay
No
Zone Type:
N
Y
Y
Y
Y
Y
Y
N
Y
N
Y
Y
Y
Y
Y
Y
Y
Y
Y
N
N
Y
Y
Y
00 Null Zone
01 Delay 1
02 Delay 2
03 Instant
04 Interior
05 Int. Stay/Away
06 Dly. Stay/Away
10 24hr Superv. Buzzer
11 24hr Burglary
12 24hr Holdup
13 24hr Gas
14 24hr Heating (N/C zone)
15 24hr Medical
16 24hr Panic
17 24hr Emergency
18 24hr Sprinkler
19 24hr Water
20 24hr Freeze
21 24hr Latching Tamper
22 Momentary Keyswitch
23 Maintained Keyswitch
25 Interior Delay
87 Dly. 24hr Fire (Wireless)
88 Stand. 24hr Fire (Wireless)
Section
Zone #
[101]
[102]
[103]
[104]
[105]
[106]
[107]
[108]
[109]
[110]
[111]
01
02
03
04
05
06
07
08
09
10
11
Zone Audible/ Steady/
Type**
Silent
Pulsed
(
(
(
(
(
(
(
(
(
(
(
)
)
)
)
)
)
)
)
)
)
)
Wireless
No
1
2
3
4
5
6
7
8
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
••Refer to section xx and page xx in the Installation Guide.
5
Programming Worksheets
Section
Zone #
[112]
[113]
[114]
[115]
[116]
[117]
[118]
[119]
[120]
[121]
[122]
[123]
[124]
[125]
[126]
[127]
[128]
[129]
[130]
[131]
[132]
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Zone Audible/ Steady/
Type**
Silent
Pulsed
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
(
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
Chime
No
Bypass
No
Force*
No
Swing
No
Tx.
Delay
No
Wireless
No
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
I________I
I________|
I________|
I________|
I________|
I________|
I________|
I________I
**Record here based on programming in sections [001] - [004]
System Timers
[160] Maximum Dialing Attempts to Each Telephone Number
(2.3.8 “Communi-cator Dialing” on page 41••)
Default:
007
I_______I_______I_______I
Valid entries are 001-015 attempts (do not enter 000).
[161] Post Dial Wait for Handshake (All Formats) (2.3.8 “Communi-cator Dialing” on page 41••)
Default:
6
040
I_______I_______I_______I
Valid entries are 001-255 seconds
••Refer to section xx and page xx in the Installation Guide.
Section 3: Advanced Communicator Programming
Telephone Numbers
NOTE:
For sections [301] to [353], the content of every section by default is [F], except for the first
digit of the telephone numbers (sections [301] to [303], which is “D”).
[301] First Telephone Number (32 Digits) (2.3.9 “Communicator Telephone Numbers” on page 43••)
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I
[302] Second Telephone Number (32 Digits) (2.3.9 “Communicator Telephone Numbers” on page 43••)
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I
[303] Third Telephone Number (32 Digits) (2.3.9 “Communicator Telephone Numbers” on page 43••)
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I
Account Codes
NOTE:
(2.3.10 “Communi-cator Account Codes” on page 44••)
Use [F] key to terminate phone number programming in sections [301] – [303]
Section
Account Code for Telephone Numbers 1 and 3
[310]
I_______I_______I_______I_______I
Section
Account Code for Telephone Number 2
[311]
I_______I_______I_______I_______I
Reporting Codes
Alarm Reporting Codes, Zones 01-32
(2.3.12 “CommunicatorReporting Codes” on page 47••) and (Appendix B: “Reporting Codes” on page 58••)
Section
[320]
[321]
[322]
[323]
Zone 01
Zone 02
Zone 03
Zone 04
Zone 05
Zone 06
Zone 07
Zone 08
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Zone 09
Zone 10
Zone 11
Zone 12
Zone 13
Zone 14
Zone 15
Zone 16
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Zone 17
Zone 18
Zone 19
Zone 20
Zone 21
Zone 22
Zone 23
Zone 24
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Zone 25
Zone 26
Zone 27
Zone 28
Zone 29
Zone 30
Zone 31
Zone 32
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Alarm Restoral Reporting Codes, Zones 01-32
(2.3.12 “CommunicatorReporting Codes” on page 47••) and (Appendix B: “Reporting Codes” on page 58••)
Section
[324]
[325]
[326]
[327]
Zone 01
Zone 02
Zone 03
Zone 04
Zone 05
Zone 06
Zone 07
Zone 08
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Zone 09
Zone 10
Zone 11
Zone 12
Zone 13
Zone 14
Zone 15
Zone 16
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Zone 17
Zone 18
Zone 19
Zone 20
Zone 21
Zone 22
Zone 23
Zone 24
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Zone 25
Zone 26
Zone 27
Zone 28
Zone 29
Zone 30
Zone 31
Zone 32
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
••Refer to section xx and page xx in the Installation Guide.
7
Programming Worksheets
Miscellaneous Alarm Reporting Codes
(2.3.12 “CommunicatorReporting Codes” on page 47••) and (Appendix B: “Reporting Codes” on page 58••)
Section
[328]
I_______I_______I
1. Duress Alarm
I_______I_______I
4. For future use
I_______I_______I
2. Opening After Alarm
I_______I_______I
5. For future use
I_______I_______I
3. Recent Closing
I_______I_______I
6. Cross Zone Police Code Alarm
Priority Alarm and Restoral
(2.3.12 “CommunicatorReporting Codes” on page 47••) and (Appendix B: “Reporting Codes” on page 58••)
Section
[329]
I_______I_______I
1. Keypad Fire Alarm
I_______I_______I
5. Keypad Fire Restoral
I_______I_______I
2. Keypad Auxiliary Alarm
I_______I_______I
6. Keypad Auxiliary Restoral
I_______I_______I
3. Keypad Panic Alarm
I_______I_______I
7. Keypad Panic Restoral
I_______I_______I
4. For future use
I_______I_______I
8. For future use
Tamper Reporting Codes, Zones 01-32
(2.3.12 “CommunicatorReporting Codes” on page 47••) and (Appendix B: “Reporting Codes” on page 58••)
Section
[330]
[331]
[332]
[333]
Zone 01
Zone 02
Zone 03
Zone 04
Zone 05
Zone 06
Zone 07
Zone 08
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Zone 09
Zone 10
Zone 11
Zone 12
Zone 13
Zone 14
Zone 15
Zone 16
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Zone 17
Zone 18
Zone 19
Zone 20
Zone 21
Zone 22
Zone 23
Zone 24
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Zone 25
Zone 26
Zone 27
Zone 28
Zone 29
Zone 30
Zone 31
Zone 32
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Tamper Restoral Reporting Codes, Zones 01-32
(2.3.12 “CommunicatorReporting Codes” on page 47••) and (Appendix B: “Reporting Codes” on page 58••)
Section
[334]
Zone 01
Zone 02
Zone 03
Zone 04
Zone 05
Zone 06
Zone 07
Zone 08
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
[335]
Zone 09
Zone 10
Zone 11
Zone 12
Zone 13
Zone 14
Zone 15
Zone 16
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
[336]
Zone 17
Zone 18
Zone 19
Zone 20
Zone 21
Zone 22
Zone 23
Zone 24
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
[337]
Zone 25
Zone 26
Zone 27
Zone 28
Zone 29
Zone 30
Zone 31
Zone 32
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Miscellaneous Tamper Reporting Codes
(2.3.12 “CommunicatorReporting Codes” on page 47••) and (Appendix B: “Reporting Codes” on page 58••)
Section
[338]
8
I_______I_______I
Keypad Lockout
••Refer to section xx and page xx in the Installation Guide.
Se c t i o n 3 : A d v a n c e d C o m m u n i c a t o r P ro g ra m m i n g
Closing (Arming) Reporting Codes, Access Codes 1-32
(2.3.12 “CommunicatorReporting Codes” on page 47••) and (Appendix B: “Reporting Codes” on page 58••)
Section
[339]
Code 01
Code 02
Code 03
Code 04
Code 05
Code 06
Code 07
Code 08
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
[340]
Code 09
Code 10
Code 11
Code 12
Code 13
Code 14
Code 15
Code 16
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
[341]
Code 17
Code 18
Code 19
Code 20
Code 21
Code 22
Code 23
Code 24
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
[342]
Code 25
Code 26
Code 27
Code 28
Code 29
Code 30
Code 31
Code 32
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Miscellaneous Closing (Arming) Reporting Codes
(2.3.12 “CommunicatorReporting Codes” on page 47••) and (Appendix B: “Reporting Codes” on page 58••)
Section
[343]
I_______I_______I
1. Closing by Duress Code 33
I_______I_______I
5. Closing by System Code 42
I_______I_______I
2. Closing by Duress Code 34
I_______I_______I
6. Partial Closing
I_______I_______I
3. Closing by System Code 40
I_______I_______I
7. Special Closing
I_______I_______I
4. Closing by System Code 41
Opening (Disarming) Reporting Codes, Access Codes 1-32
(2.3.12 “CommunicatorReporting Codes” on page 47••) and (Appendix B: “Reporting Codes” on page 58••)
Section
[344]
[345]
[346]
[347]
Code 01
Code 02
Code 03
Code 04
Code 05
Code 06
Code 07
Code 08
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Code 09
Code 10
Code 11
Code 12
Code 13
Code 14
Code 15
Code 16
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Code 17
Code 18
Code 19
Code 20
Code 21
Code 22
Code 23
Code 24
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Code 25
Code 26
Code 27
Code 28
Code 29
Code 30
Code 31
Code 32
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Miscellaneous Opening (Disarming) Reporting Codes
(2.3.12 “CommunicatorReporting Codes” on page 47••) and (Appendix B: “Reporting Codes” on page 58••)
Section
[348]
I_______I_______I
1. Opening by Duress Code 33
I_______I_______I
5. Opening by System Code 42
I_______I_______I
2. Opening by Duress Code 34
I_______I_______I
6. Auto-arm Cancellation
I_______I_______I
3. Opening by System Code 40
I_______I_______I
7. Special Opening
I_______I_______I
4. Opening by System Code 41
••Refer to section xx and page xx in the Installation Guide.
9
Programming Worksheets
Maintenance Alarm Reporting Codes
(2.3.12 “CommunicatorReporting Codes” on page 47••) and (Appendix B: “Reporting Codes” on page 58••)
Section
[349]
I_______I_______I
1. Battery Trouble Alarm
I_______I_______I
5. For future use
I_______I_______I
2. AC Failure Trouble Alarm
I_______I_______I
6. For future use
I_______I_______I
3. Remote Sounder Trouble Alarm
I_______I_______I
7. For future use
I_______I_______I
4. Fire Trouble Alarm
I_______I_______I
8. For future use
Maintenance Restoral Reporting Codes
(2.3.12 “CommunicatorReporting Codes” on page 47••) and (Appendix B: “Reporting Codes” on page 58••)
Section
[350]
I_______I_______I
1. Battery Trouble Restoral
I_______I_______I
5. For future use
I_______I_______I
2. AC Failure Trouble Restoral
I_______I_______I
6. TLM Restoral
I_______I_______I
3. Remote Sounder Trouble Restoral
I_______I_______I
7. For future use
I_______I_______I
4. Fire Trouble Restoral
I_______I_______I
8. For future use
Miscellaneous Maintenance Reporting Codes
(2.3.12 “CommunicatorReporting Codes” on page 47••) and (Appendix B: “Reporting Codes” on page 58••)
Section
[351]
I_______I_______I
1. Telephone Number 1 FTC Restore
I_______I_______I
5. DLS Lead Out
I_______I_______I
2. Telephone Number 2 FTC Restore
I_______I_______I
6. Zone Fault Alarm
I_______I_______I
3. Event Buffer 75% Full
I_______I_______I
7. Zone Fault Restore
I_______I_______I
4. DLS Lead IN
I_______I_______I
8. Delinquency Code
Test Transmission Reporting Codes
(2.3.12 “CommunicatorReporting Codes” on page 47••) and (Appendix B: “Reporting Codes” on page 58••)
Section
[352]
I_______I_______I
1. Periodic Test Transmission
I_______I_______I
2. System Test
I_______I_______I
3. For future use
Wireless Maintenance Reporting Codes
(2.3.12 “CommunicatorReporting Codes” on page 47••) and (Appendix B: “Reporting Codes” on page 58••)
Section
[353]
I_______I_______I
1. General Zone Low Battery Alarm
I_______I_______I
2. General Zone Low Battery Restoral
[360] Communicator Format Options
NOTE:
(2.3.11 “Communi-cator Reporting Formats” on page 44••)
The Third telephone number follows the format of the First telephone number.
Default
04
I_______I_______I
1st/3rd Telephone Number
04
I_______I_______I
2nd Telepphone Number
01
20 BPS, 1400 HZ handshake
02
20 BPS, 2300 HZ handshake
04
SIA FSK
05
Pager
10
03
DTMF CONTACT ID
••Refer to section xx and page xx in the Installation Guide.
Se c t i o n 3 : A d v a n c e d C o m m u n i c a t o r P ro g ra m m i n g
Call Direction Options
[361] Alarm/Restore Communicator Call Directions (2.3.8 “Communi-cator Dialing” on page 41••)
Default
Option ON
OFF
ON
I_______I
1
1st Telephone Number
Disabled
OFF
I_______I
2
2nd Telephone Number
Disabled
OFF
I_______I
3-8
For future use
[363] Tamper/Restore Communicator Call Directions (2.3.8 “Communi-cator Dialing” on page 41••)
Default
Option ON
ON
I________I
OFF
OFF
OFF
1
1st Telephone Number
Disabled
I________I
2
2nd Telephone Number
Disabled
I________I
3-8
For future use
[365] Opening/Closing Communicator Call Directions (2.3.8 “Communi-cator Dialing” on page 41••)
Default
Option ON
ON
I________I
OFF
OFF
OFF
1
1st Telephone Number
Disabled
I________I
2
2nd Telephone Number
Disabled
I________I
3-8
For future use
[367] System Maintenance Alarm/Restore Communicator Call Directions
(2.3.8 “Communi-cator Dialing” on page 41••)
Default
Option ON
OFF
ON
I________I
1
1st Telephone Number
Disabled
OFF
I________I
2
2nd Telephone Number
Disabled
OFF
I________I
3-8
For future use
[368] System Test Transmissions Communicator Call Directions
(2.3.8 “Communi-cator Dialing” on page 41••)
Default
Option ON
OFF
ON
I________I
1
1st Telephone Number
Disabled
OFF
I________I
2
2nd Telephone Number
Disabled
OFF
I________I
3-8
For future use
••Refer to section xx and page xx in the Installation Guide.
11
Programming Worksheets
[370] Communication Variables
Section/
Page #••
Default
003
I_______I_______I_______I
Swinger Shutdown (Alarms and Rest)
(001-014 Transmissions, 000=disabled)
2.3.18 / 54
003
I_______I_______I_______I
Swinger Shutdown (Tampers and Rest) (001-014 Transmissions, 000=disabled)
2.3.18 / 54
003
I_______I_______I_______I
Swinger Shutdown (Maint and Rest)
(001-014 Transmissions, 000=disabled)
2.3.18 / 54
000
I_______I_______I_______I
Communication Delay
(001-255 seconds)
2.3.12 / 47
030
I_______I_______I_______I
AC Failure Communication Delay
(001-255 minutes)
2.3.12 / 47
003
I_______I_______I_______I
TLM Trouble Delay
(No. of checks required - valid entries 003 - 255)
2.3.15 / 52
030
I_______I_______I_______I
Test Transmission Cycle
(001-255 days)
2.3.16 / 53
007
I_______I_______I_______I
Zone Low Battery Transmission Delay
(000-255 days)
2.3.12 / 47
030
I_______I_______I_______I
Delinquency Transmission Cycle
(000-255 days/hours)
2.3.12 / 47
NOTE:
To disable the AC failure communications delay, program [000].
[371] Test Transmission Time of Day (2.3.16 “Test Transmissions” on page 53••)
Default
9999
I_______I_______I_______I_______
Valid entries are 0000-2359, 9999 to disable)
Communicator Options
[380] First Communicator Option Code
Default
Option ON
OFF
Section/
Page #••
ON
I_______I
1
Communications Enabled
Communications Disabled
2.3.8 / 41
OFF
I_______I
2
Restorals on Bell Time-out
Restorals Follow Zones
2.3.12 / 47
OFF
I_______I
3
Pulse Dialing
DTMF Dialing
2.3.8 / 41
OFF
I_______I
4
Switch to Pulse Dialing on 5th Attempt
DTMF Dial For All Attempts
2.3.8 / 41
OFF
I_______I
5
3rd Telephone Number enabled
3rd Telephone Number disabled
2.3.9 / 43
OFF
I_______I
6
Alternate Dial (1st and 3rd)
Call 1st Number, Backup to 3rd
2.3.9 / 43
OFF
I_______I
7
For future use
OFF
I_______I
8
Delinquency Follows Zone Activity (Hours)
Delinquency Follows Arming (Days)
2.3.12 / 47
OFF
Section/
Page #••
[381] Second Communicator Option Code
Default
Option ON
OFF
I_______I
1
Open After Alarm Kypd Ringback enabled
Open After Alrm Kypd Ringback disabled
2.2.5 / 24
OFF
I_______I
2
Open After Alarm Bell Ringback enabled
Open After Alrm Bell Ringback disabled
2.2.5 / 24
OFF
I_______I
3
SIA Sends Programmed Rep. Codes
SIA Sends Automatic Rep. Codes
2.3.11 / 44
OFF
I_______I
4
Closing Confirmation Enabled
Closing Confirmation Disabled
ON
I_______I
5
Talk/Listen on phone lines 1/3
No Talk/Listen on phone lines 1/3
2.3.13 / 49
OFF
I_______I
6
Talk/Listen on phone line 2
No Talk/Listen on phone line 2
2.3.13 / 49
ON
I_______I
7
Contact ID Uses Programmed Rep. Codes
Contact ID Uses Auto Rep. Codes
2.3.11 / 44
OFF
I_______I
8
For future use
12
••Refer to section xx and page xx in the Installation Guide.
2.2.5 / 24
Section 4: Downloading Options
[401] First Downloading Option Code (2.3.14 “Downloading” on page 51••)
Default
Option ON
OFF
OFF
I_______I
1
Answering Machine/Double Call Enabled
Answering Machine/Double Call Disabled
ON
I_______I
2
User Can Enable DLS Window
User Cannot Enable DLS Window
OFF
I_______I
3
Call-Back Enabled
Call-Back Disabled
OFF
I_______I
4
User-initiated call-up enabled
User-initiated call-up disabled
OFF
I_______I
5-8
For future use
[402] Downloading Computer’s Telephone Number (32 Digits) (2.3.14 “Downloading” on page 51••)
I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I_____I
[403] Downloading Access Code (2.3.14 “Downloading” on page 51••)
Default:
9010
I_______I_______I_______I_______I
Enter 4 HEX digits
[404] Panel Identification Code (2.3.14 “Downloading” on page 51••)
Default:
9010
I_______I_______I_______I_______I
Enter 4 HEX digits
[405] Answering Machine Double-call Timer (2.3.14 “Downloading” on page 51••)
Default:
060
I_______I_______I_______I
(Valid entries are 001-255 seconds)
[406] Number of Rings to Answer On (2.3.14 “Downloading” on page 51••)
Default:
000
I_______I_______I_______I
(Valid entries are 000-015 rings
[499] Initiate PC-Link (Local Downloading) (2.3.14 “Downloading” on page 51••)
To begin PC-Link downloading, enter [499][Installer’s Code][499].
••Refer to section xx and page xx in the Installation Guide.
13
Section 5: International Programming
[701] First International Options Code
Default
Option ON
OFF
Section/
Page #••
OFF
I_______I
1
For future use only
OFF
I_______I
2
Time Base is Internal Crystal
Time Base is AC Line
2.3.19 / 54
OFF
I_______I
3
AC/DC Arming Inhibit enabled
AC/DC Arming Inhibit disabled
2.2.5 / 24
OFF
I_______I
4
All System Tampers Require Installer Reset All System Tampers follow Restore
2.3.7 / 41
OFF
I_______I
5
6-Digit User Access Codes
4-Digit User Access Codes
2.2.2 / 20
OFF
I_______I
6
Busy tone detection enabled
Busy tone detection disabled
2.3.8 / 41
OFF
I_______I
7
For future use only
OFF
I_______I
8
Standard Communications Priority
UL Communications Priority
2.3.8 / 41
OFF
Section/
Page #••
[702] Second International Options Code
Default
Option ON
OFF
I_______I
1
Pulse Dialing Make/Break Ratio is 33/67 Pulse Dialing Make/Break Ratio is 40/60
2.3.8 / 41
ON
I_______I
2
Force Dialing enabled
2.3.8 / 41
OFF
I_______I
3
Land Line Test Transmission in minutes Land Line Test Transmission in days
2.3.16 / 53
OFF
I_______I
4
1600 Hz Handshake
Standard Handshake
2.3.11 / 44
OFF
I_______I
5
ID Tone enabled
ID Tone disabled
2.3.8 / 41
OFF
I_______I
6
2100 HZ ID Tone
1300 Hz ID Tone
2.3.8 / 41
OFF
I_______I
7
Full 1-Hr User enabled DLS Window
Full 6-Hr User enabled DLS Window
2.3.14 / 51
OFF
I_______I
8
Bell on FTC when armed
FTC Trouble only when armed
2.3.8 / 41
Force Dialing disabled
[703] Delay Between Dialing Attempts (2.3.8 “Communi-cator Dialing” on page 41••)
Default:
14
001
I_______I_______I_______I
(Valid entries are 000-255 Seconds)
••Refer to section xx and page xx in the Installation Guide.
Section 6: Talk/Listen-in Programming
NOTE:
To program the Talk/Listen-in feature enter programming section [802], then sub-sections [10]
through [55], as described below.
[802] Audio Interface Programming
Port Assignments - Zones 01 - 32 (2.3.13 “Talk/Listen-in Programming” on page 49••)
Enter the nearest Intercom Station Number (01= NT9010, 02=Remote Sounder, 00 = Not Used); Default = 00
[10]
[11]
[12]
[13]
Zone 01
Zone 02
Zone 03
Zone 04
Zone 05
Zone 06
Zone 07
Zone 08
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Zone 09
Zone 10
Zone 11
Zone 12
Zone 13
Zone 14
Zone 15
Zone 16
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Zone 17
Zone 18
Zone 19
Zone 20
Zone 21
Zone 22
Zone 23
Zone 24
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Zone 25
Zone 26
Zone 27
Zone 28
Zone 29
Zone 30
Zone 31
Zone 32
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
I_______I_______I
Central Station (Listen-in) Telephone Key Functions (2.3.13 “Talk/Listen-in Programming” on page 49••)
[00]
[01]
[02]
[03]
[04] - [06]
[07]
[08]
[09]
Key Not Used
Talk To All Speakers
For Future Use
Listen to All
For Future Use
Extend Time
For Future Use
Terminate Session
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
For Future Use
Cancel First Keypress
For Future Use
Zone Select for Listen-In
Switch to Next Microphone
Switch to Previous Microphone
For Future Use
Mode Key
Select a function (00-17) for each telephone key that will be used. Contact your central station to determine what functions to
program. Program unused keys as [00]. You can program additional functions by setting one telephone key as a “Mode” key.
For example, in section [40], by default the [9] key is programmed as the Mode key
[40] Telephone Key Programming
Telephone Key
Default
1
2
3
4
5
6
7
8
9
0
*
#
01
00
03
00
00
00
07
00
17
00
00
11
[41] Telephone Mode Key Programming
Telephone Key
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
[Mode Key] + 1
[Mode Key] + 2
[Mode Key] + 3
[Mode Key] + 4
[Mode Key] + 5
[Mode Key] + 6
[Mode Key] + 7
[Mode Key] + 8
[Mode Key] + 9
[Mode Key] + 0
[Mode Key] + *
[Mode Key] + #
••Refer to section xx and page xx in the Installation Guide.
Default
00
00
00
00
00
00
00
00
09
00
00
00
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
I_____I_____I
15
Programming Worksheets
[50] First Audio Control Option Code (2.3.13 “Talk/Listen-in Programming” on page 49••)
Default
Option ON
OFF
OFF
I_______I
1
Zone 1 Alarm Enabled
Zone 1 Alarm Disabled
OFF
I_______I
2
Zone 2 Alarm Enabled
Zone 2 Alarm Disabled
OFF
I_______I
3
Zone 3 Alarm Enabled
Zone 3 Alarm Disabled
OFF
I_______I
4
Zone 4 Alarm Enabled
Zone 4 Alarm Disabled
OFF
I_______I
5
Zone 5 Alarm Enabled
Zone 5 Alarm Disabled
OFF
I_______I
6
Zone 6 Alarm Enabled
Zone 6 Alarm Disabled
OFF
I_______I
7
Zone 7 Alarm Enabled
Zone 7 Alarm Disabled
OFF
I_______I
8
Zone 8 Alarm Enabled
Zone 8 Alarm Disabled
[51] Second Audio Control Option Code (2.3.13 “Talk/Listen-in Programming” on page 49••)
Default
Option ON
OFF
OFF
I_______I
1
Zone 9 Alarm Enabled
Zone 9 Alarm Disabled
OFF
I_______I
2
Zone 10 Alarm Enabled
Zone 10 Alarm Disabled
OFF
I_______I
3
Zone 11 Alarm Enabled
Zone 11 Alarm Disabled
OFF
I_______I
4
Zone 12 Alarm Enabled
Zone 12 Alarm Disabled
OFF
I_______I
5
Zone 13 Alarm Enabled
Zone 13 Alarm Disabled
OFF
I_______I
6
Zone 14 Alarm Enabled
Zone 14 Alarm Disabled
OFF
I_______I
7
Zone 15 Alarm Enabled
Zone 15 Alarm Disabled
OFF
I_______I
8
Zone 16 Alarm Enabled
Zone 16 Alarm Disabled
[52] Third Audio Control Option Code (2.3.13 “Talk/Listen-in Programming” on page 49••)
Default
16
Option ON
OFF
OFF
I_______I
1
Zone 17 Alarm Enabled
Zone 17 Alarm Disabled
OFF
I_______I
2
Zone 18 Alarm Enabled
Zone 18 Alarm Disabled
OFF
I_______I
3
Zone 19 Alarm Enabled
Zone 19 Alarm Disabled
OFF
I_______I
4
Zone 20 Alarm Enabled
Zone 20 Alarm Disabled
OFF
I_______I
5
Zone 21 Alarm Enabled
Zone 21 Alarm Disabled
OFF
I_______I
6
Zone 22 Alarm Enabled
Zone 22 Alarm Disabled
OFF
I_______I
7
Zone 23 Alarm Enabled
Zone 23 Alarm Disabled
OFF
I_______I
8
Zone 24 Alarm Enabled
Zone 24 Alarm Disabled
••Refer to section xx and page xx in the Installation Guide.
Se c t i o n 6 : T a l k/ L i s te n - i n P ro g ra m m i n g
[53] Fourth Audio Control Option Code (2.3.13 “Talk/Listen-in Programming” on page 49••)
Default
Option ON
OFF
OFF
I_______I
1
Zone 25 Alarm Enabled
Zone 25 Alarm Disabled
OFF
I_______I
2
Zone 26 Alarm Enabled
Zone 26 Alarm Disabled
OFF
I_______I
3
Zone 27 Alarm Enabled
Zone 27 Alarm Disabled
OFF
I_______I
4
Zone 28 Alarm Enabled
Zone 28 Alarm Disabled
OFF
I_______I
5
Zone 29 Alarm Enabled
Zone 29 Alarm Disabled
OFF
I_______I
6
Zone 30 Alarm Enabled
Zone 30 Alarm Disabled
OFF
I_______I
7
Zone 31 Alarm Enabled
Zone 31 Alarm Disabled
OFF
I_______I
8
Zone 32 Alarm Enabled
Zone 32 Alarm Disabled
[54] Fifth Audio Control Option Code (2.3.13 “Talk/Listen-in Programming” on page 49••)
Default
Option ON
OFF
OFF
I_______I
1
Tampers Enabled
Tampers Disabled
OFF
I_______I
2
Openings and Closings Enabled
Openings and Closings Disabled
OFF
I_______I
3
Aux. Key Alarm Enabled
Aux. Key Alarm Disabled
OFF
I_______I
4
Panic Key Alarm Enabled
Panic Key Alarm Disabled
OFF
I_______I
5
Duress Alarm Enabled
Duress Alarm Disabled
OFF
I_______I
6
For future use
OFF
I_______I
7
Opening After Alarm Enabled
OFF
I_______I
8
For future use
NOTE:
Opening After Alarm Disabled
If any event is enabled for Talk/Listen-in, Communications MUST also be enabled (2.3.8 “Com-
muni-cator Dialing” on page 41••).
[55] Audio Duration (2.3.13 “Talk/Listen-in Programming” on page 49••)
Default
90
Valid entries: 01-99 seconds
I_______I_______I
••Refer to section xx and page xx in the Installation Guide.
17
Section 7: Wireless Receiver Programming
NOTE: To program the NT9010 Wireless Receiver, enter programming section [804], then sub-sections
[01] through [93], as described below.
[804] Wireless Receiver Programming
Wireless Device Serial Number Programming (2.3.4 “Wireless Device Serial Numbers” on page 39••)
NOTE: You can also program wireless device serial numbers using the NT9010 Flash Programming.
Please see the NT9010 Quick Set Up Guide for more information. All wireless devices must pass the
placement test, even if the serial number is entered in section [804].
• 6-digit hexadecimal entry is required.
• When enrolling devices with 5-digit serial numbers, the first digit must be zero (0), followed by the 5-digit
serial number (6-digits total). For example, to enter the serial number 42345, enter [042345].
Zone Serial Numbers
Section
Zone
Serial Number
Section
Zone
Serial Number
[01]
01
I_____I_____I_____I_____I_____I_____I
[17]
17
I_____I_____I_____I_____I_____I_____I
[02]
02
I_____I_____I_____I_____I_____I_____I
[18]
18
I_____I_____I_____I_____I_____I_____I
[03]
03
I_____I_____I_____I_____I_____I_____I
[19]
19
I_____I_____I_____I_____I_____I_____I
[04]
04
I_____I_____I_____I_____I_____I_____I
[20]
20
I_____I_____I_____I_____I_____I_____I
[05]
05
I_____I_____I_____I_____I_____I_____I
[21]
21
I_____I_____I_____I_____I_____I_____I
[06]
06
I_____I_____I_____I_____I_____I_____I
[22]
22
I_____I_____I_____I_____I_____I_____I
[07]
07
I_____I_____I_____I_____I_____I_____I
[23]
23
I_____I_____I_____I_____I_____I_____I
[08]
08
I_____I_____I_____I_____I_____I_____I
[24]
24
I_____I_____I_____I_____I_____I_____I
[09]
09
I_____I_____I_____I_____I_____I_____I
[25]
25
I_____I_____I_____I_____I_____I_____I
[10]
10
I_____I_____I_____I_____I_____I_____I
[26]
26
I_____I_____I_____I_____I_____I_____I
[11]
11
I_____I_____I_____I_____I_____I_____I
[27]
27
I_____I_____I_____I_____I_____I_____I
[12]
12
I_____I_____I_____I_____I_____I_____I
[28]
28
I_____I_____I_____I_____I_____I_____I
[13]
13
I_____I_____I_____I_____I_____I_____I
[29]
29
I_____I_____I_____I_____I_____I_____I
[14]
14
I_____I_____I_____I_____I_____I_____I
[30]
30
I_____I_____I_____I_____I_____I_____I
[15]
15
I_____I_____I_____I_____I_____I_____I
[31]
31
I_____I_____I_____I_____I_____I_____I
[16]
16
I_____I_____I_____I_____I_____I_____I
[32]
32
I_____I_____I_____I_____I_____I_____I
NOTE:
18
Default =
When deleting any panic pendant, the supervision must be re-enabled in sections [82] to [85].
••Refer to section xx and page xx in the Installation Guide.
S e c t i o n 7 : W i r e l e s s R ec ei ve r P ro g ra m m i n g
Wireless Key Serial Numbers
Section
Wireless
Key
Serial Number
Section
Wireless
Key
Serial Number
[41]
01
I_____I_____I_____I_____I_____I_____I
[49]
09
I_____I_____I_____I_____I_____I_____I
[42]
02
I_____I_____I_____I_____I_____I_____I
[50]
10
I_____I_____I_____I_____I_____I_____I
[43]
03
I_____I_____I_____I_____I_____I_____I
[51]
11
I_____I_____I_____I_____I_____I_____I
[44]
04
I_____I_____I_____I_____I_____I_____I
[52]
12
I_____I_____I_____I_____I_____I_____I
[45]
05
I_____I_____I_____I_____I_____I_____I
[53]
13
I_____I_____I_____I_____I_____I_____I
[46]
06
I_____I_____I_____I_____I_____I_____I
[54]
14
I_____I_____I_____I_____I_____I_____I
[47]
07
I_____I_____I_____I_____I_____I_____I
[55]
15
I_____I_____I_____I_____I_____I_____I
[48]
08
I_____I_____I_____I_____I_____I_____I
[56]
16
I_____I_____I_____I_____I_____I_____I
Wireless Key Function Button Options
Entry
00
03
04
05
06
07
16
17
27
28
29
30
31
(2.2.11 “Programming Wireless Keys” on page 33••)
Description
Null Key (Key not used)
Stay Arm
Away Arm
No entry delay arming
Door Chime On/Off
System Test
Quick Exit
Activate Stay/Away Zones
Disarm (Off)
FIre Alarm
Auxiliary Alarm
Panic Alarm
Status
Can Be Used on
Wireless Key
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
NOTE:
If using Wireless Keys for any arming function, you must enable the Quick Arming option in
section [015], option [4].
••Refer to section xx and page xx in the Installation Guide.
19
Programming Worksheets
Wireless Key Function Buttons
Section Button # Default
[61]
1
03
I_____I_____I
[62]
2
04
I_____I_____I
[63]
3
27
I_____I_____I
[64]
4
30
I_____I_____I
Zone Supervision
[81] Wireless Supervisory Window (2.3.5 “Wireless Zone Supervision” on page 40••)
Default
24
I_______I_______I
Valid entries: 01 - 24 hours
NOTE: Hardwired zones and RF Jam Detect zones should NOT be supervised, and must be disabled in
the following sections.
[82] Zone Transmitter Supervision Options (1-8) (2.3.5 “Wireless Zone Supervision” on page 40••)
Option ON
Default
OFF
OFF
I_______I
1
Zone 1 Supervision Enabled
Zone 1 Supervision Disabled
OFF
I_______I
2
Zone 2 Supervision Enabled
Zone 2 Supervision Disabled
OFF
I_______I
3
Zone 3 Supervision Enabled
Zone 3 Supervision Disabled
OFF
I_______I
4
Zone 4 Supervision Enabled
Zone 4 Supervision Disabled
OFF
I_______I
5
Zone 5 Supervision Enabled
Zone 5 Supervision Disabled
OFF
I_______I
6
Zone 6 Supervision Enabled
Zone 6 Supervision Disabled
OFF
I_______I
7
Zone 7 Supervision Enabled
Zone 7 Supervision Disabled
OFF
I_______I
8
Zone 8 Supervision Enabled
Zone 8 Supervision Disabled
[83] Zone Transmitter Supervision Options (9-16) (2.3.5 “Wireless Zone Supervision” on page 40••)
Option ON
Default
20
OFF
OFF
I_______I
1
Zone 9 Supervision Enabled
Zone 9 Supervision Disabled
OFF
I_______I
2
Zone 10 Supervision Enabled
Zone 10 Supervision Disabled
OFF
I_______I
3
Zone 11 Supervision Enabled
Zone 11 Supervision Disabled
OFF
I_______I
4
Zone 12 Supervision Enabled
Zone 12 Supervision Disabled
OFF
I_______I
5
Zone 13 Supervision Enabled
Zone 13 Supervision Disabled
OFF
I_______I
6
Zone 14 Supervision Enabled
Zone 14 Supervision Disabled
OFF
I_______I
7
Zone 15 Supervision Enabled
Zone 15 Supervision Disabled
OFF
I_______I
8
Zone 16 Supervision Enabled
Zone 16 Supervision Disabled
••Refer to section xx and page xx in the Installation Guide.
S e c t i o n 7 : W i r e l e s s R ec ei ve r P ro g ra m m i n g
[84] Zone Transmitter Supervision Options (17-24) (2.3.5 “Wireless Zone Supervision” on page 40••)
Option ON
Default
OFF
OFF
I_______I
1
Zone 17 Supervision Enabled
Zone 17 Supervision Disabled
OFF
I_______I
2
Zone 18 Supervision Enabled
Zone 18 Supervision Disabled
OFF
I_______I
3
Zone 19 Supervision Enabled
Zone 19 Supervision Disabled
OFF
I_______I
4
Zone 20 Supervision Enabled
Zone 20 Supervision Disabled
OFF
I_______I
5
Zone 21 Supervision Enabled
Zone 21 Supervision Disabled
OFF
I_______I
6
Zone 22 Supervision Enabled
Zone 22 Supervision Disabled
OFF
I_______I
7
Zone 23 Supervision Enabled
Zone 23 Supervision Disabled
OFF
I_______I
8
Zone 24 Supervision Enabled
Zone 24 Supervision Disabled
[85] Zone Transmitter Supervision Options (25-32) (2.3.5 “Wireless Zone Supervision” on page 40••)
Option ON
Default
OFF
OFF
I_______I
1
Zone 25 Supervision Enabled
Zone 25 Supervision Disabled
OFF
I_______I
2
Zone 26 Supervision Enabled
Zone 26 Supervision Disabled
OFF
I_______I
3
Zone 27 Supervision Enabled
Zone 27 Supervision Disabled
OFF
I_______I
4
Zone 28 Supervision Enabled
Zone 28 Supervision Disabled
OFF
I_______I
5
Zone 29 Supervision Enabled
Zone 29 Supervision Disabled
OFF
I_______I
6
Zone 30 Supervision Enabled
Zone 30 Supervision Disabled
OFF
I_______I
7
Zone 31 Supervision Enabled
Zone 31 Supervision Disabled
OFF
I_______I
8
Zone 32 Supervision Enabled
Zone 32 Supervision Disabled
••Refer to section xx and page xx in the Installation Guide.
21
Section 8: Function Keys, Voice Prompt Interface,
and Special Zone Programming
NOTE: To program the NT9010 Voice Prompt Interface, Function Keys, Hardwired Zones, or the RF
Jamming Detection zone, enter programming section [807], then sub-sections [000] through [705], as
described below.
NOTE:
All entries in this section are in decimal. Valid digits are 0-9, A-F are invalid.
[807] Voice Prompt Interface Programming
[000] NT9010 Function Key Programming (2.2.10 “Function Keys” on page 31••)
Function Key Options:
00 Null Key
01-02 For future use
03 Stay Arm
04 Away Arm
05 [*][9] No-Entry Arm
06 [*][4] Chime On / Off
07 [*][6][——][4] System Test
Function
Key 1
NT9010
Defaults:
08 [*][1] Bypass Mode
09 [*][2] Trouble Display
10 [*][3] Alarm Memory
11 [*][5] User Programming
12 [*][6] User Functions
13-15 For future use
16 [*][0] Quick Exit
Function
Key 2
Function
Key 3
Function
Key 4
03
04
06
16
I________I________I
I________I________I
I________I________I
I________I________I
17 [*][1] Reactivate Stay/Away Zones
18-26 For future use
27 Status
28 Volume Control
29 Memo Record
30 Memo Playback
Function
Key 5
27
I________I________I
Function
Key 6
Function
Key 7
Function
Key 8
28
29
30
I________I________I
I________I________I
I________I________I
[002] First Voice Prompt Option Code (2.2.3 “Voice Prompt Interface” on page 22••)
Default
Option ON
OFF
ON
I_______I
1
Clock is AM/PM
ON
I_______I
2
Verbal Chime for Zone Openings
Verbal Chime Disabled for Zone Openings
OFF
I_______I
3
Verbal Chime for Zone Closings
Verbal Chime Disabled for Zone Closings
OFF
I_______I
4-8
Clock is 24 Hour
For future use
[003] Status Prompt Mask (2.2.3 “Voice Prompt Interface” on page 22••)
Default
22
Option ON
OFF
ON
I_______I
01
Warning, Bypass On Prompt enabled
ON
I_______I
02
System Trouble .... Prompt enabled
Prompt disabled
ON
I_______I
03
System Open, Zone .... Prompt enabled
Prompt disabled
Prompt disabled
Prompt disabled
ON
I_______I
04
Alarms in Memory Prompt enabled
ON
I_______I
05
Service Required Prompt enabled
Prompt disabled
ON
I_______I
06
AC Power Trouble Prompt enabled
Prompt disabled
ON
I_______I
07
Phone Line Trouble Prompt enabled
Prompt disabled
ON
I_______I
08
Communication Trouble Prompt enabled
Prompt disabled
ON
I_______I
09
Zone Fault Prompt enabled
Prompt disabled
ON
I_______I
10
Zone Tamper Prompt enabled
Prompt disabled
ON
I_______I
11
Zone Low Battery Prompt enabled
Prompt disabled
ON
I_______I
12
Time and Date Incorrect Prompt enabled
Prompt disabled
••Refer to section xx and page xx in the Installation Guide.
S e c t i o n 8: F u n c ti o n K ey s , V o i c e Pr o m p t I n te r fa c e , a n d S p e c i a l Z o n e P ro g ra m m i n g
[004] Star Function Prompt Mask (2.2.3 “Voice Prompt Interface” on page 22••)
Default
ON
OFF
ON
l________l
Option
01
For Zone Bypassing
Prompt enabled
Prompt disabled
ON
l________l
02
For System Troubles
Prompt enabled
Prompt disabled
ON
l________l
03
For Alarm Memory
Prompt enabled
Prompt disabled
Prompt enabled
Prompt disabled
Prompt disabled
ON
l________l
04
For Door Chime Control
OFF
l________l
05
For future use
ON
l________l
06
For Special Functions
Prompt enabled
OFF
l________l
07
For Memo
Prompt enabled
ON
l________l
08
For Arming Without Entry Prompt enabled
Prompt disabled
ON
l________l
09
For Quick Arming
Prompt enabled
Prompt disabled
ON
l________l
10
For Quick Exit
Prompt enabled
Prompt disabled
ON
l________l
11
To Arm Interior Zones
Prompt enabled
Prompt disabled
Prompt enabled
Prompt disabled
Prompt enabled
Prompt disabled
ON
l________l
12
For Volume Control
OFF
l________l
13
For future use
OFF
l________l
14
For future use
OFF
l________l
15
For future use
ON
l________l
16
For User Programming
[020] Local/Remote Telephone Access Code
(2.2.1 “Accessing the NT9010 System Using a Telephone” on page 19••)
Default
***
Enter 3 digits (0,1,2,3,4,5,6,7,8,9,*,#)
l_____l_____l_____l
NOTE:
Avoid Codes that interfere with any local telephone equipment (e.g. fax machines, etc.), or
that coincide with local telephone company 3-digit telephone numbers and services. Also do not exit
this section by pressing [#], it will be accepted as a valid digit.
[021] Telephone Access Options (2.2.1 “Accessing the NT9010 System Using a Telephone” on page 19••)
Default
Option ON
OFF
OFF
l________
01
Local Access Only
OFF
l________
02
Access code always req’d for local access No code req’d for local access
NOTE:
Remote and Local Access enabled
Local Access Only must be ON.
[030] Alarm Tone Period for Verbal Alarm (2.2.4 “Alarm Announce-ments” on page 23••)
Default
015
l_____l_____l_____l
Valid entries are 001-255 seconds.
Hardwired Loop Zone Assignment (2.3.3 “Enrolling Hardwired Zones” on page 39••)
Section
Loop #
Default
Zone #
[091]
1
00
I_____I_____I
[092]
2
00
I_____I_____I
••Refer to section xx and page xx in the Installation Guide.
23
Programming Worksheets
[093] RF Jamming Detection Zone (2.3.6 “RF Jamming Detection Zone” on page 40••)
NOTE: Programming RF Jam Zone will automatically program the corresponding label as RF Jam.
Please be sure that the corresponding serial number is (000000). RF Jam will not work properly otherwise.
Default
00
NOTE:
I_______I_______I
Select an unused zone that will go open when a jamming signal is present.
Valid entries 01-32, 00 = disabled
Zone supervision must be disabled for RF Jam Detect zones and hardwired zones.
Programming the System and Zone Labels
(2.1.5 “Programming Audio Labels” on page 16••)
You can program labels for the system and for the zones through the NT9010 Flash Programming, or through the
following programming sections. To program the labels using these programming sections:
1. Enter the 3-digit sub-section for the label ([601] to [633]).
2. Enter the 3-digit code for each word you want to program. You can enter up to six words for each label.
Please see “Audio Label Library” on page 27 for a list of the 3-digit codes for each available word. To add
numbers to a label, see 2.1.5 “Programming Audio Labels” on page 16. If your label is less than six words,
press [#] at the end of the label.
3. If you want to use a recorded label, in place of the first word of the label, enter [244] then the number of the
label [001] to [005]. The recorded label will replace all six words in the section. To record a label, see 2.1.5
“Programming Audio Labels” on page 16••.
4. When you have entered the label, the system will recite it.
5. If the label is correct, press [#]. To change the label, repeat steps 1-4, above.
24
••Refer to section xx and page xx in the Installation Guide.
S e c t i o n 8: F u n c ti o n K ey s , V o i c e Pr o m p t I n te r fa c e , a n d S p e c i a l Z o n e P ro g ra m m i n g
.
Section
Label For:
[601]
[602]
[603]
[604]
[605]
[606]
[607]
[608]
[609]
[610]
[611]
[612]
[613]
[614]
[615]
[616]
[617]
[618]
[619]
[620]
[621]
[622]
[623]
[624]
[625]
[626]
[627]
[628]
[629]
[630]
[631]
[632]
[633]
Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
Zone 8
Zone 9
Zone 10
Zone 11
Zone 12
Zone 13
Zone 14
Zone 15
Zone 16
Zone 17
Zone 18
Zone 19
Zone 20
Zone 21
Zone 22
Zone 23
Zone 24
Zone 25
Zone 26
Zone 27
Zone 28
Zone 29
Zone 30
Zone 31
Zone 32
Fire Alarm
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
l_____l_____l_____l
Default
Label
Zone 1
Zone 2
Zone 3
Zone 4
Zone 5
Zone 6
Zone 7
Zone 8
Zone 9
Zone 10
Zone 11
Zone 12
Zone 13
Zone 14
Zone 15
Zone 16
Zone 17
Zone 18
Zone 19
Zone 20
Zone 21
Zone 22
Zone 23
Zone 24
Zone 25
Zone 26
Zone 27
Zone 28
Zone 29
Zone 30
Zone 31
Zone 32
Fire Zone
Recording Custom Labels
You can record up to five custom labels for the system and for the zones using programming sections [701] to
[705]. You can use any of these labels for the system or zone labels, instead of the words available on the Audio
Label Library. To record a custom label:
1.
2.
3.
4.
Enter one of sub-sections [701] to [705].
Press the Record function key on the NT9010.
Speak into the NT9010 microphone. Each label can be up to 1.5 seconds long. To stop recording, press [#].
When you are finished recording, press the Playback function key. The NT9010 plays your recorded label back
to you. To listen to the label again, press Playback again.
5. If you want to re-record the label, press the Record function key again.
6. To record more labels, repeat steps 1 to 5.
NOTE:
If the NT9010 is completely powered down (both AC and battery power are lost), the
recorded labels will be lost.
25
Section 9: Special Installer Functions
[901] Installer Walk Test Mode Enable / Disable (2.3.22 “Walk Test” on page 56••)
[904] Wireless Module Placement Test
You can conduct placement tests using the NT9010 Flash Programming, or using this section. Each device must
pass three consecutive tests in order to be fully enrolled on the system. For more information, please refer to your
NT9010 Installation Manual.
NOTE: Local annunciation must be enabled for Module Placement Feedback [017], option 4. [904]
will not auto change to high volume for module placement.
• Select the module / transmitter (Zones 01-32).
• Press [#] to Cancel.
Placement
Bell / Buzzer
Good
Bad
1 Beep / Squawk
3 Beeps / Squawks
[990] Installer Lockout Enable (2.3.21 “Installer Lockout” on page 55••)
[991] Installer Lockout Disable (2.3.21 “Installer Lockout” on page 55••)
[992] Restore Main Controller Programming to Factory Default Settings
(2.3.20 “Factory Default” on page 54••)
[995] Restore Audio Interface Programming to Factory Default Settings
(2.3.20 “Factory Default” on page 54••)
[996] Restore Wireless Receiver Programming to Factory Default Settings
(2.3.20 “Factory Default” on page 54••)
[999] Restore All NT9010 Programming to Factory Default Settings
(2.3.20 “Factory Default” on page 54••)
NOTE:
26
It is recommended that a full default [999] be preformed to restore all defaults.
••Refer to section xx and page xx in the Installation Guide.
A p p e n d i x A : A u d io Lab el
Lib ra ry
To program system and zone labels, please see “Programming Zone Labels” on page 12••.
[000] Combined # Command
[035] Centre
[071] Exterior
[107] Home
[036] Changeroom
[072] Extinguisher
[108] Hose
[001] Ordered # Command
[037] China
[073] Factory
[109] Hot tub
[002] Individual # Command
[038] Circuit
[074] Family
[110] House
[039] Classroom
[075] Fan
[111] Humidity
[040] Coffee-maker
[076] Fence
[112] Interior
[041] Cold
[077] File
[113] Intrusion
[042] Collection
[078] Fire
[114] Item
[043] Compressor
[079] Floor
[115] Jewelry
[044] Computer
[080] Florida
[116] Kitchen
[045] Contact
[081] Flow
[117] Ladies’
[046] Control
[082] Foil
[118] Lamp
[047] Crawl-space
[083] Fountain
[119] Laundry
[048] Curtain
[084] Foyer
[120] Lawn
[049] Dark
[085] Freezer
[121] Left
[050] Day
[086] French
[122] Level
[051] Deck
[087] Front
[123] Library
[052] Degrees
[088] Furnace
[124] Light
[053] Den
[089] Game
[125] Lights
[054] Detector
[090] Garage
[126] Liquor
[055] Dining
[091] Garbage
[127] Living
[056] Dishwasher
[092] Gas
[128] Loading
[057] Door
[093] Gate
[129] Lobby
[058] Down
[094] Girls
[130] Lot
[059] Driveway
[095] Glassbreak
[131] Low
[060] East
[096] Greenhouse
[132] Lower
[061] Electric
[097] Ground
[133] Machine
[062] Elevator
[098] Guard
[134] Maids
[063] Employee
[099] Guest
[135] Mail
[064] Energy-save
[100] Gun
[136] Main
[065] Entertainment
[101] Gym
[137] Maintenance
[066] Entry
[102] Hallway
[138] Master
[067] Equipment
[103] Heat
[139] Mat
[068] Exercise
[104] Heater
[140] Medical
[069] Exhaust
[105] High
[141] Meeting
[070] Exit
[106] Holiday
[142] Men’s
[003] Access
[004] Air-conditioning
[005] Alcove
[006] And
[007] Apartment
[008] Appliance
[009] Area
[010] Atrium
[011] Attic
[012] Automatic
[013] Away
[014] Back
[015] Backyard
[016] Balcony
[017] Bar
[018] Barn
[019] Basement
[020] Bathroom
[021] Bay
[022] Beam
[023] Bedroom
[024] Blinds
[025] Boat
[026] Boiler
[027] Bottom
[028] Boys
[029] Building
[030] Cabinet
[031] Cafeteria
[032] Camera
[033] Cash
[034] Ceiling
••Refer to section xx and page xx in the Installation Guide.
27
Appendix A:
Audio Label Library
[143] Middle
[169] Power
[195] Skylight
[221] Unit
[144] Mode
[170] Pressure
[196] Sliding
[222] Up
[145] Motion
[171] Proximity
[197] Smoke
[223] Upper
[146] Night
[172] Pull-station
[198] Solarium
[224] Utility
[147] North
[173] Pump
[199] Sounder
[225] Vault
[148] Number
[174] Ramp
[200] South
[226] Vent
[149] Nursery
[175] Rear
[201] Sprinkler
[227] Vibration
[150] Office
[176] Receiving
[202] Staff
[228] Walkway
[151] Outer
[177] Recreation
[203] Stairs
[229] Warehouse
[152] Outlet
[178] Refrigerator
[204] Stereo
[230] Washroom
[153] Output
[179] Reset
[205] Stock
[231] Water
[154] Over
[180] Restricted
[206] Storage
[232] Weekend
[155] Overflow
[181] Right
[207] Strike
[233] Well
[156] Overhead
[182] Roof
[208] Sump
[234] West
[157] Panel
[183] Room
[209] Supervision
[235] Window
[158] Panic-button
[184] Safe
[210] Swimming-pool
[236] Wine-cellar
[159] Parking
[185] Sauna
[211] System
[237] Work
[160] Partition
[186] Schedule
[212] Tamper
[238] Yard
[161] Patio
[187] Sensor
[213] Television
[239] Zone
[162] Perimeter
[188] Service
[214] Temperature
[240] Thermostat
[163] Photocopier
[189] Shed
[215] Time
[241] RF Jam
[164] Picture
[190] Shipping
[216] Tool
[242] Not Used
[165] Place
[191] Shop
[217] Top
[243] Not Used
[166] Play
[192] Shutter
[218] Track
[244] Custom Label Section
[167] Porch
[193] Side
[219] Trap
[245] (2 Second Pause)
[168] Portable
[194] Silent
[220] Under
28
F CC CO M P L IA N C E S TAT E M E NT
CAUTION: Changes or modifications not expressly
approved by Digital Security Controls Ltd. could void your
authority to use this equipment.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
Re-orient the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/television technician for help.
The user may find the following booklet prepared by the
FCC useful: “How to Identify and Resolve Radio/Television
Interference Problems”. This booklet is available from the
U.S. Government Printing Office, Washington D.C. 20402,
Stock # 004-000-00345-4.
IMPORTANT INFORMATION
This equipment complies with Part 68 of the FCC Rules. On
the side of this equipment is a label that contains, among
other information, the FCC registration number of this
equipment.
Notification to Telephone Company The customer shall
notify the telephone company of the particular line to which
the connection will be made, and provide the FCC registration number and the ringer equivalence of the protective
circuit.
FCC Registration Number:
F53CAN-34664-AL-E
Ringer Equivalence Number:
0.4B
USOC Jack:
RJ-31X
Telephone Connection Requirements Except for the telephone company provided ringers, all connections to the
telephone network shall be made through standard plugs
and telephone company provided jacks, or equivalent, in
such a manner as to allow for easy, immediate disconnection of the terminal equipment. Standard jacks shall be so
arranged that, if the plug connected thereto is withdrawn,
no interference to the operation of the equipment at the
customer’s premises which remains connected to the telephone network shall occur by reason of such withdrawal.
Incidence of Harm Should terminal equipment or protective circuitry cause harm to the telephone network, the telephone company shall, where practicable, notify the
customer that temporary disconnection of service may be
required; however, where prior notice is not practicable, the
telephone company may temporarily discontinue service if
such action is deemed reasonable in the circumstances. In
the case of such temporary discontinuance, the telephone
company shall promptly notify the customer and will be
given the opportunity to correct the situation.
Additional Telephone Company Information The security
control panel must be properly connected to the telephone
line with a USOC RJ-31X telephone jack.
The FCC prohibits customer-provided terminal equipment
be connected to party lines or to be used in conjunction
with coin telephone service. Interconnect rules may vary
from state to state.
Changes in Telephone Company Equipment or Facilities The telephone company may make changes in its
communications facilities, equipment, operations or procedures, where such actions are reasonably required and
proper in its business. Should any such changes render
the customer’s terminal equipment incompatible with the
telephone company facilities the customer shall be given
adequate notice to the effect modifications to maintain
uninterrupted service.
Ringer Equivalence Number (REN) The REN is useful to
determine the quantity of devices that you may connect to
your telephone line and still have all of those devices ring
when your telephone number is called. In most, but not all
areas, the sum of the RENs of all devices connected to one
line should not exceed five (5.0). To be certain of the number of devices that you may connect to your line, you may
want to contact your local telephone company.
Equipment Maintenance Facility If you experience trouble with this telephone equipment, please contact the facility indicated below for information on obtaining service or
repairs. The telephone company may ask that you disconnect this equipment from the network until the problem has
been corrected or until you are sure that the equipment is
not malfunctioning.
Digital Security Controls Ltd. 160 Washburn St., Lockport,
NY 14094
AVIS: L’étiquette de l’Industrie Canada identifie le matériel homologué. Cette étiquette certifie que le matériel est
conforme à certaines normes de protection, d’exploitation
et de sécurité des réseaux de télécommunications. Industrie Canada n’assure toutefois pas que le matériel fonctionnera à la satisfaction de l’utilisateur.
Avant d’installer ce matériel, l’utilisateur doit s’assurer qu’il
est permis de le raccorder aux installations de l’entreprise
locale de télécommunication. Le matériel doit également
être installé en suivant une méthode acceptée de raccordement. L’abonné ne doit pas oublier qu’il est possible que
la conformité aux conditions énoncées ci-dessus
n’empêchent pas la dégradation du service dans certaines
situations.
Les réparations de matériel homologué doivent être effectuées par un centre d’entretien canadien autorisé désigné
par le fournisseur. La compagnie de télécommunications
peut demander à l’utilisateur de débrancher un appareil à
la suite de réparations ou de modifications effectuées par
l’utilisateur ou à cause de mauvais fonctionnement.
Pour sa propre protection, l’utilisateur doit s’assurer que
tous les fils de mise à la terre de la source d’énergie électrique, les lignes téléphoniques et les canalisations d’eau
métalliques, s’il y en a, sont raccordés ensemble. Cette
précaution est particulièrement importante dans les
régions rurales.
AVERTISSEMENT: L’utilisateur ne doit pas tenter de faire
ces raccordements lui-même; il doit avoir recours à un service d’inspection des installations électriques, ou à un
électricien, selon le cas.
L’indice de charge (IC) assigné a chaque dispositif terminal indique, pour éviter toute surcharge, le pourcentage de
la charge totale qui peut être raccordée à un circuit téléphonique bouclé utilisé par ce dispositif. La terminaison
du circuit bouclé peut être constituée de n’importe quelle
combinaison de dispositifs, pourvu que la somme des indices de charge de l’ensemble des dispositifs ne dépasse
pas 100.
L’Indice de charge de ce produit est 0.4B.
NOTICE: The Industry Canada label identifies certified
equipment. This certification means that the equipment
meets certain telecommunications network protective,
operational and safety requirements. Industry Canada
does not guarantee the equipment will operate to the user’s
satisfaction.
Before installing this equipment, users should ensure that it
is permissible to be connected to the facilities of the local
telecommunications company. The equipment must also
be installed using an acceptable method of connection.
The customer should be aware that compliance with the
above conditions may not prevent degradation of service in
some situations.
Repairs to certified equipment should be made by an
authorized Canadian maintenance facility designated by
the supplier. Any repairs or alterations made by the user to
this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to
disconnect the equipment.
User should ensure for their own protection that the electrical ground connections of the power utility, telephone lines
and internal metallic water pipe system, if present, are connected together. This precaution may be particularly
important in rural areas.
CAUTION: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or electrician, as appropriate.
The Load Number (LN) assigned to each terminal device
denotes the percentage of the total load to be connected to
a telephone loop which is used by the device, to prevent
overloading. The termination on a loop may consist of any
combination of devices subject only to the requirement that
the total of the Load Numbers of all the devices does not
exceed 100.
The Load Number of this unit is 0.4B.
This Class B digital apparatus meets all requirements of the Canadian interference-causing equipment regulations.
Cet appareil numérique de la Classe B respecte toutes les exigences de règlement sur le matériel brouilleur du Canada.
©2000 Digital Security Controls Ltd.
Toronto • Canada • www.dscgrp.com • 1-800-387-3630
Printed in Canada
29005096 R003
Download PDF