120V Hardwired with 10YR Sealed Lithium Battery Backup AC10-500B Wi-Fi Smoke + Carbon

120V Hardwired with 10YR Sealed Lithium Battery Backup AC10-500B Wi-Fi Smoke + Carbon
cat. AC10-500B
Wi-Fi Smoke + Carbon
Monoxide Alarm
10YR CO Sensor/10YR Alarm Life/
10YR Battery backup
10 year CO sensor and alarm life. Sealed, tamper
proof batteries last 10 years.
Wireless Interconnect
Bluetooth BLE communication between alarms
and Wi-Fi to connect to your smart phone or
tablet.
Flood Mesh Network Communication
2-way communication format that sends, receives
and re-sends the alarm signals providing a more
reliable network.
App
Receive notifications in case of an alarm, test
and silence, check alarm battery life levels,
alarm history, and CO levels.
Talking Alarm
Voice and location technology tells you the type
of danger and the location. Choose from 13 preprogrammed alarm locations. Plan safest path
to exit.
Multi-Color Indicator Ring
ulti-color light ring provides visual indication
M
of various alarm states.
2-in-1 Protection
Detects smoke and carbon monoxide in one
alarm. Provides best protection throughout the
home.
Photoelectric Smoke Sensor
Helps reduce false alarms caused by cooking
smoke or shower steam.
Hardwire Compatibility
Can be interconnected with all First Alert/BRK
hardwired smoke, CO and Combo alarms.
10
TM
Bluetooth
YEAR
Limited
Warranty
Photoelectric
Sensor
120V Hardwired with 10YR
Sealed Lithium Battery Backup
Description:
First Alert Onelink AC10-500B (model AC10-500) is a single station combination smoke and CO alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels,
dormitories, and other multifamily dwellings as defined in standard NFPA
101. It has been fully tested and complies with, UL217, UL2034, CSFM, NFPA
72, NFPA 720, HUD, CSFM and NFPA 101 and other agencies that model
their codes after the above agencies. It meets building codes where AC
hardwired with battery backup smoke and CO alarms are required either
separately or in combination along with wireless interconnect, voice with
location and silence features and with model building codes published by
the ICC.
First Alert Onelink AC10-500B is a state of the art wireless talking combination smoke and CO alarm designed to provide early warning of a fire or CO.
It features a fully insect screened Photoelectric smoke sensing chamber and
an electrochemical carbon monoxide sensor, an 85dB horn, a full function
test switch and a silence feature. The multi-color light ring provides visual indication of various alarm states. This combination alarm interconnects
via Bluetooth BLE communication. It also connects to your wireless router
via Wi-Fi to provide access to your Apple smart device. You have a choice
of 13 pre-programmed locations where a voice will announce the location
and danger detected. When interconnected with other First Alert Onelink
alarms it will also announce the danger and location detected of that alarm
too. It operates on a Mesh Network; a two-way communication format that
sends, receives and re-sends the alarm signals providing a more reliable
network. Perfect for apartment, dormitory or hotel applications. Designed
for wall or ceiling mounting. Includes mounting anchors and screws.
cat. AC10-500B
Line Drawing Specifications
Top View
Technical Specifications
Mounting
Bracket
Side View
5.44”
4.94”
1.50”
5.44”
4.94”
Architectural And Engineering Specs
The alarm shall be a BRK/First Alert Model AC10-500 and shall provide at a
minimum the following features and functions:
1. A photoelectric smoke sensing chamber and an electrochemical CO sensor.
2. The unit shall be capable of self restoring.
3. A fully screened smoke sensing chamber to resist entry of small insects
thereby reducing the probability of unwanted alarms.
4. Powered by 120V AC, 60Hz and have a monitored sealed 10-year lithium
powercell with a tamperproof design battery backup. The tamperproof
design shall not allow the powercell to be removed.
5. Wireless Interconnect: Bluetooth BLE communication between alarms and
Wi-Fi to connect to your Apple smart phone or tablet.
6. A Voice Warning of danger detected in addition to speaking one of 13 preprogrammed locations, e.g. “Warning, Evacuate, Smoke in Basement”.
7. Flood Mesh Network Communication: 2-way communication format that
sends, receives and re-sends the alarm signals providing a more reliable
network.
8. Free App/Activity Log: App provides real time notification and history
logging of all events by alarm so you can easily identify condition and
troubleshoot incidents such as identifying initiating alarm or low battery
condition.
9. A solid state piezo horn rated at 85dB at 10 ft.
10. A low power warning indicator shall cause the alarm to “chirp” when it
reaches the end of its service life and needs to be replaced. Upon end of life,
the unit shall meet UL requirements for disabling the alarm and the non reinstallation of unit to mounting bracket.
11. Multi-Color Indicator Ring: provides visual indication of various alarm states.
Green: Normal or completed operation; Blue: Voice prompts or Pairing; Red:
Alarm/Warning; Amber: Malfunction/End of Life; White: Night light
12. A full function test button. The test button should check all alarm functions
by stimulating the chamber to simulate a smoke or CO condition, causing
the unit to alarm. The unit should also have a silence feature to silence
unwanted nuisance alarms.
13. The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C)
and relative humidity between 10% and 95%.
14. The unit shall contain mounting hardware and shall be listed for wall or
ceiling mounting.
15. The unit shall at a minimum meet the requirements of UL217, UL2034, CSFM,
HUD, NFPA 72, NFPA 720, NFPA 101, ICC.
Parts of this Alarm
Installation of this alarm must conform to all local electrical codes and Article 760 of
the National Electrical Code (NFPA 70) and NFPA 72 and NFPA 720. Interconnected
units must meet the following requirements: Total length of wire interconnecting
units should be less than 1000 feet, be #18 gauge or larger and be rated at least
300V. It is recommended that all units be on the same fuse or circuit breaker. If
local codes do not permit, be sure the neutral wire is common to both phases.
Installed/Bottom of Alarm
10
1
B
9
}
Top of Alarm
678
6
7
2
Alarm Dimensions:
5.44”L x 5.44”W x 1.50”H
Alarm Weight:
11.4 oz
Operating Voltage:
120V AC 60Hz with 3V lithium
battery backup
Power (Standby/Alarm):
0.012A/0.065A
Temperature Range:
40°F (4°C) to 100°F (38°C)
Humidity Range:
10% to 95% relative humidity (RH)
Audio Alarm:
85dB at 10 feet
Voice Output:
Choice of 13 pre-programmed
locations
BLE Wireless Frequency:
2.4 GHz. FCC approved. Complies
with Part 15 of the FCC Rules.
Wi-Fi:
IEEE 802.11 b/g/n Radio/WLAN
Test/Silence:
Electronically simulates smoke
and/or CO conditions causing the
unit to alarm. Press and hold test/
silence button.
Alarm Reset:
Automatic when smoke and/or CO
clears
Smoke Sensor:
CO Sensor:
Photoelectric
Electrochemical
Interconnections:
Up to 18 units, BLE or hardwired
(needs AC10-500B Bridge Unit),
with smoke, carbon monoxide, heat
alarms and relays. Maximum 12
smoke alarms.
Listing:
UL217 and UL2034 Standards
Shipping Specifications
Individual Carton
Dimensions
6.31”W x 3.25”D x 6.50”H
Weight
1.06 lbs.
Cube
0.08 ft3
UPC
0 29054 01568 6
Master Carton
Dimensions
10.63”L x 6.63”W x 7.13”H
Master Pack
3
Weight
3.6 lbs.
Cube:
0.28 ft3
I 2of5:
300 29054 01568 7
Pallet Information
Cases per Layer
26
Number of Layers:
7
Cases per Pallet:
182
Units per Pallet:
546
Cube:
Weight:
58.9 ft3
713 lbs.
8
3
4
3
1
}
TOP OF ALARM
1 Test Silence Button
2 Color Indicator Ring
3 Speaker/Alarm Horn
INSTALLED/BOTTOM OF ALARM
1 Alarm
6 Neutral Wire (White)
2 Ceiling or Wall
7 Interconnect Wire (Orange)
3 Quick Connect Plug
8 Hot Wire (Black)
4 Wire Nut
9 Mounting Bracket
5 Junction Box
10 Mounting Slots
A From un-switched 120V AC 60 Hz source
To additional units; Maximum = 18 total (Maximum 12
B
Smoke Alarms)
A
5 4 3
2
1
©2015 BRK Brands, Inc. All rights reserved. Distributed by BRK Brands, Inc., Aurora,
Illinois 60504. First Alert® is a registered trademark of The First Alert Trust. BRK Brands,
Inc. is a subsidiary of Jarden Corporation (NYSE: JAH). Wi-Fi® is a registered trademark of Wi-Fi Alliance. App Store is a service mark of Apple Inc. Apple, iPhone, iPad,
iPad Air, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other
countries. HomeKit is a trademark of Apple Inc. App Store is a service mark of Apple
Inc. Controlling HomeKit-enabled accessories away from home requires an Apple TV
(3rd generation or later) with Apple TV software 7.0 or
later and an iPhone, iPad, or iPod touch with iOS 9 or
later. HomeKit requires an iPhone, iPad, or iPod touch
with iOS 9 or later. The Bluetooth® word mark and logos
are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by BRK Brands, Inc., is under
license. Other trademarks and trade names are those of
their respective owners.
CM3256
brkelectronics.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement