Catalogue accastillage RUTGERSON V9 2014

Catalogue accastillage RUTGERSON V9 2014
V.9
Welcome to the World of Rutgerson.
“Our vision is to offer the most innovative as well as functional solutions to the international marine market. Additionally, all our products have both unique design and the highest level of safety.”
- Göran Rutgerson, Executive Director and owner.
Our products have evolved from more than 35 years of experience obtained through research and development, as well as strong partnerships with the world
leading manufacturers and designers within the marine industry.
The company is located in Marstrand, the heart of the Swedish west coast, and
one of Europe’s leading sailing centres. Sailing conditions around Marstrand are
tough, and the personnel have first-hand experience of what our products must
withstand in terms of safety and durability. With production, sales and administration in the same building we are very flexible and we have fast, reliable deliveries.
Our wide assortment of products is designed for various needs and demands. Our
three main product areas are sail hardware, deck hardware as well as portlights
and hatches. Rutgerson Marin AB is represented in all parts of the world through
our global distribution network. We have around forty local distributors and we are
also in some cases in direct contact with sail makers, boat builders and boatyards.
Our core values, reliability, innovation and performance, signify that we constantly develop new innovative products that you can always
rely on even in extremely rough conditions.
Only with all these aspects could a product be called superior. Therefore, Rutgerson proudly presents products that truly are “Best in Action”.
Best regards,
The Rutgerson Crew
Marstrand, Sweden
Catalogue version 9
The photo on the front page is
taken by Dan Ljungsvik,
Ljungsvik Communication AB.
2
www.rutgerson.se
Blocks
Hatches16
Classic Hatches
18
Master Flush Hatches
20
Exclusive Flush Hatches
21
Deck Hardware
22
Blocks and wire Blocks
22
Footblocks32
Rope clutches
33
Padeyes and stainless steel fittings
37
Deck organisers
38
Mainsheet System
40
Genoa System
46
Self-tacking Jib System
49
General warranty & key terms of supply
by Rutgerson Marin AB
51
Hatches
Portlights4
Oval Portlights
6
Rectangular Portlights
8
Elliptical Portlights
10
Round Portlights
12
Customised portlights
13
Accessories14
Portlights
CONTENTS
Rope Clutches
Padeyes &
Organisers
Mainsheet
System
Genoa System
Self Tacking
Jib System
Photo: Curtosy of Bertel Kolthof. www.seascape18.com
3
PORTLIGHTS
Rutgerson portlights are famous for their seamless design as well as extensive range of shapes and sizes. Portlights let light and air into the
boat and keep water and moisture out. They also make a strong visual statement about the quality of the craft. The design and construction
of Rutgerson portlights fit all kinds of boats, but they are are in particular suitable for the high end of the market as they offer great upper
class added value.
The Rutgerson portlights are deep drawn in Swedish stainless steel 316L and polished to a high lustre. The seamless construction ensures
that the strength and elegant design will last far longer than conventional alternatives.
The tinted acrylic glass is either 10 or 15mm thick and the window area of Rutgerson portlights is in general largest on the market.
An essential factor is the seal around the opening window and frame. The most common materials used by other brands are cellular rubber
or compressible foam, but they tend to disintegrate gradually over the years. These materials are also vulnerable to distortion due to the
high pressure on the seal when the portlight is closed. Rutgerson portlights are equipped with a high quality silicone rubber gasket, which
is very durable and thus prevents leakage.
The locking mechanism consists of Delrin spiral knobs, designed so that the closing pressure can be varied.
We offer a wide range of inner frames including frames made of stainless steel, which is completely unique. Inner frames are always included
and the alternatives are chromed ABS (CH), Off-White ABS (OW) or Stainless Steel (RF).
The portlights are available in oval, rectangular, elliptical and round shapes in both fixed and opening models. All portlights are available
in several different depths. They have a simple, fast installation and each product comes with a cut-out template. A range of optional fly
screens is also available.
Area 1
All Rutgerson portlights are CE approved in ocean category A, Area 1.
The hinges are made of polyamide
and have a friction function, which
enables the glass to stay open in different positions.
4
The seal is made of silicon rubber,
which is the most durable solution
and gives the portlight maximum
performance. Additionally, the seal
is incorporated into the acrylic glass.
www.rutgerson.se
The acetal knobs are designed so
that the closing pressure can be varied.
Portlight shapes
Oval Portlight
403x204 mm
Rectangular Portlight
370x164 mm
402x195 mm
428x179 mm
700x191 mm
Elliptical Portlight
450x195 mm
485x225 mm
Round Portlight
250 mm
5
Oval Portlights
Stainless steel reinforcement
Opening
Fixed
Oval Portlight 403 x 204 mm
Part no
A1120-200RF
A1120-200CH
A1120-200OW
A1130-200RF
A1130-200CH
A1130-200OW
A1150-200RF
A1150-200CH
A1150-200OW
Glass
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Type
SS reinforcement
SS reinforcement
SS reinforcement
SS reinforcement
SS reinforcement
SS reinforcement
SS reinforcement
SS reinforcement
SS reinforcement
Function
Opening
Opening
Opening
Opening
Opening
Opening
Opening
Opening
Opening
Inner frame
Stainless steel
Chrome
Off-white
Stainless steel
Chrome
Off-white
Stainless steel
Chrome
Off-white
Rec. hull
thickness [mm]
8 - 14
8 - 33
8 - 33
15 - 27
27 - 46
27 - 46
28 - 47
47 - 66
47 - 66
Depth
[mm]
14
14
14
27
27
27
47
47
47
Weight
[gr]
1910
1990
1990
2050
2130
2130
1990
2060
2060
Glass Thickness
[mm]
10
10
10
10
10
10
10
10
10
Part no
A1320-200RF
A1320-200CH
A1320-200OW
A1330-200RF
A1330-200CH
A1330-200OW
A1350-200RF
A1350-200CH
A1350-200OW
A1125-200RF
A1125-200OW
A1135-200RF
A1135-200OW
A1155-200RF
A1155-200OW
Glass
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Type
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Function
Opening
Opening
Opening
Opening
Opening
Opening
Opening
Opening
Opening
Fixed
Fixed
Fixed
Fixed
Fixed
Fixed
Inner frame
Stainless steel
Chrome
Off-white
Stainless steel
Chrome
Off-white
Stainless steel
Chrome
Off-white
Stainless steel
Off-white
Stainless steel
Off-white
Stainless steel
Off-white
Rec. hull
thickness [mm]
8 - 14
8 - 33
8 - 33
15 - 27
27 - 46
27 - 46
28 - 47
47 - 66
47 - 66
8 - 14
8 - 33
15 - 27
27 - 46
28 - 47
47 - 66
Depth
[mm]
14
14
14
27
27
27
47
47
47
14
14
27
27
47
47
Weight
[gr]
1640
1710
1710
1780
1860
1860
1990
2060
2060
1340
1500
1450
1600
1660
1800
Glass Thickness
[mm]
15
15
15
15
15
15
15
15
15
10
10
10
10
10
10
Air inlet area
26000 mm3
8 - 70
Engine room ventilation
A1495-200
Engine room ventilation
6
1670
Stainless steel reinforcement means that there is a
frame on the inside of the acrylic glass that increases
the rigidity of the portlight. It also gives the portlight
a high-class impression when viewed from the inside.
www.rutgerson.se
Cutout line
B
Y
C
Oval Portlight dimension guide
A
X
Outer dimensions
[mm]
XxY
403 x 204
Cut-out dimensions
[mm]
A
B
C Radius
381
181
91
Rectangular Portlight dimension guide
Outer dimensions
[mm]
XxY
370 x 164
402 x 195
428 x 179
700 x 191
Cut-out dimensions
[mm]
A
B
C Radius
347
142
61
380
173
61
406
157
61
678
169
61
Eliptical Portlight dimension guide
Outer dimensions
[mm]
XxY
450 x 195
485 x 225
A
428
467
Cut-out dimensions
[mm]
B
C Radius
173
389
205
390
Photo: Curtesy of Paragon Yachts
Portlights 7
D Radius
51
48
Rectangular Portlights
Fixed
Opening
Stainless steel reinforcment
Rectangular Portlight 402 x 195 mm
Part no
A2120-200CH
A2120-200OW
A2130-200CH
A2130-200OW
Glass
Tinted
Tinted
Tinted
Tinted
Type
SS reinforcement
SS reinforcement
SS reinforcement
SS reinforcement
Function
Opening
Opening
Opening
Opening
Inner frame
Chrome
Off-white
Chrome
Off-white
Rec. hull
thickness [mm]
8 - 43
8 - 43
26 - 55
26 - 55
Depth
[mm]
14
14
26
26
Weight
[gr]
1810
1810
2040
2040
Glass Thickness
[mm]
10
10
10
10
Part no
A2320-200CH
A2320-200OW
A2330-200CH
A2330-200OW
A2125-200CH
A2125-200OW
A2135-200CH
A2135-200OW
Glass
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Type
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Function
Opening
Opening
Opening
Opening
Fixed
Fixed
Fixed
Fixed
Inner frame
Chrome
Off-white
Chrome
Off-white
Chrome
Off-white
Chrome
Off-white
Rec. hull
thickness [mm]
8 - 43
8 - 43
26 - 55
26 - 55
8 - 43
8 - 43
26 - 55
26 - 55
Depth
[mm]
14
14
26
26
14
14
26
26
Weight
[gr]
1600
1600
1740
1740
1940
1940
1990
1990
Glass Thickness
[mm]
15
15
15
15
10
10
10
10
Rec. hull
thickness [mm]
8 - 43
8 - 43
26 - 55
26 - 55
Depth
[mm]
14
14
26
26
Weight
[gr]
1650
1650
1650
1650
Glass Thickness
[mm]
10
10
10
10
Rec. hull
thickness [mm]
8 - 43
8 - 43
Depth
[mm]
14
14
Weight
[gr]
2250
2250
Glass Thickness
[mm]
10
10
Opening
Rectangular Portlight 428 x 179 mm
Part no
A2320-180CH
A2320-180OW
A2330-180CH
A2330-180OW
Glass
Tinted
Tinted
Tinted
Tinted
Type
Regular
Regular
Regular
Regular
Function
Opening
Opening
Opening
Opening
Inner frame
Chrome
Off-white
Chrome
Off-white
Opening
Rectangular Portlight 700 x 191 mm
Part no
A2320-190CH
A2320-190OW
8
Glass
Tinted
Tinted
Type
Regular
Regular
Function
Opening
Opening
Inner frame
Chrome
Off-white
www.rutgerson.se
Opening
Fixed
Rectangular Portlight 370 x 164 mm
Part no
A2320-170RF
A2320-170OW
A2340-170RF
A2340-170OW
A2125-170RF
A2125-170OW
A2145-170RF
A2145-170OW
Glass
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Type
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Function
Opening
Opening
Opening
Opening
Fixed
Fixed
Fixed
Fixed
Rec. hull
thickness [mm]
8 - 20
8 - 46
21 - 40
21 - 66
8 - 20
8 - 43
21 - 40
28 - 66
Inner frame
Stainless steel
Off-white
Stainless steel
Off-white
Stainless steel
Off-white
Stainless steel
Off-white
Depth
[mm]
14
14
40
40
14
14
40
40
Weight
[gr]
1100
1100
1210
1190
1000
1150
1050
1200
Glass Thickness
[mm]
15
15
15
15
10
10
10
10
Rectangular cutout
Oval Portlight dimension guide
Cutout line
C
Outer dimensions
[mm]
XxY
403 x 204
Cut-out dimensions
[mm]
A
B
C Radius
381
181
91
Outer dimensions
[mm]
XxY
370 x 164
402 x 195
428 x 179
700 x 191
B
Y
Rectangular Portlight dimension guide
Cut-out dimensions
[mm]
A
B
C Radius
347
142
61
380
173
61
406
157
61
678
169
61
Eliptical Portlight dimension guide
A
X
Outer dimensions
[mm]
XxY
450 x 195
485 x 225
A
428
467
Cut-out dimensions
[mm]
B
C Radius
173
389
205
390
Photo: Curtesy of Saga Boats
Portlights 9
D Radius
51
48
Elliptical Portlights 450 x 195 mm
Opening
Stainless steel reinforcement
Fixed
Elliptical Portlight 450 x 195 mm
Part no
A3120-190RF
A3120-190CH
A3120-190OW
A3130-190RF
A3130-190CH
A3130-190OW
Glass
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Type
SS reinforcement
SS reinforcement
SS reinforcement
SS reinforcement
SS reinforcement
SS reinforcement
Function
Opening
Opening
Opening
Opening
Opening
Opening
Inner frame
Stainless steel
Chrome
Off-white
Stainless steel
Chrome
Off-white
Rec. hull
thickness [mm]
8 - 15
8 - 32
8 - 32
8 - 32
8 - 32
8 - 32
Depth
[mm]
15
15
15
27
27
27
Weight
[gr]
1850
1750
1750
2060
1950
1950
Glass Thickness
[mm]
10
10
10
10
10
10
Part no
A3320-190RF
A3320-190CH
A3320-190OW
A3330-190RF
A3330-190CH
A3330-190OW
A3125-190RF
A3125-190OW
A3135-190RF
A3135-190OW
Glass
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Type
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Function
Opening
Opening
Opening
Opening
Opening
Opening
Fixed
Fixed
Fixed
Fixed
Inner frame
Stainless steel
Chrome
Off-white
Stainless steel
Chrome
Off-white
Stainless steel
Off-white
Stainless steel
Off-white
Rec. hull
thickness [mm]
8 - 32
8 - 32
8 - 32
16 - 27
27 - 44
27 - 44
8 - 15
8 - 32
16 - 27
27 - 44
Depth
[mm]
15
15
15
27
27
27
15
15
27
27
Weight
[gr]
1600
1500
1500
1800
1700
1700
1350
1500
1470
1750
Glass Thickness
[mm]
15
15
15
15
15
15
10
10
10
10
Air inlet area
21 000 mm3
8 - 70
Engine room ventilation
A3495-190
Engine room ventilation
Photo: Curtesy of Forbina
10
www.rutgerson.se
1670
Elliptical Portlights 485 x 225 mm
Opening
Stainless steel reinforcment
Fixed
Elliptical Portlight 485 x 225 mm
Part no
A3130-220RF
A3130-220CH
A3130-220OW
A3150-220RF
A3150-220CH
A3150-220OW
Glass
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Type
SS reinforcement
SS reinforcement
SS reinforcement
SS reinforcement
SS reinforcement
SS reinforcement
Function
Opening
Opening
Opening
Opening
Opening
Opening
Inner frame
Stainless steel
Chrome
Off-white
Stainless steel
Chrome
Off-white
Rec. hull
thickness [mm]
8 - 27
8 - 54
8 - 54
28 - 47
47 - 67
47 - 67
Depth
[mm]
27
27
27
47
47
47
Weight
[gr]
2250
2250
2250
2450
2450
1700
Glass Thickness
[mm]
10
10
10
10
10
10
Part no
A3330-220RF
A3330-220CH
A3330-220OW
A3350-220RF
A3350-220CH
A3350-220OW
A3135-220RF
A3155-220RF
Glass
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Tinted
Type
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Regular
Function
Opening
Opening
Opening
Opening
Opening
Opening
Fixed
Fixed
Inner frame
Stainless steel
Chrome
Off-white
Stainless steel
Chrome
Off-white
Stainless steel
Stainless steel
Rec. hull
thickness [mm]
8 - 27
8 - 54
8 - 54
28 - 47
47 - 67
47 - 67
8 - 15
28 - 47
Depth
[mm]
27
27
27
47
47
47
27
47
Weight
[gr]
1950
1950
1950
2050
2050
2050
1700
1850
Glass Thickness
[mm]
15
15
15
15
15
15
10
10
Air inlet area
27 500 mm3
8 - 70
Engine room ventilation
A3395-220
2100
Oval Portlight dimension guide
Outer dimensions
[mm]
XxY
403 x 204
Engine room ventilation
Cut-out dimensions
[mm]
A
B
C Radius
381
181
91
Elliptical cutout
Rectangular Portlight dimension guide
B
Y
Cutout line
C
Outer dimensions
[mm]
XxY
D
370 x 164
402 x 195
428 x 179
700 x 191
Cut-out dimensions
[mm]
A
B
C Radius
347
142
61
380
173
61
406
157
61
678
169
61
Eliptical Portlight dimension guide
A
X
Outer dimensions
[mm]
XxY
450 x 195
485 x 225
A
428
467
Cut-out dimensions
[mm]
B
C Radius
173
389
205
390
D Radius
51
48
Portlights 11
Round Portlights
Opening
Round Portlight 250 mm
Part no
A4320-250OW
A4330-250OW
Glass
Tinted
Tinted
Type
Regular
Regular
Function
Opening
Opening
Rec. hull
thickness [mm]
8 - 33
27 - 46
Inner frame
Off-white
Off-white
Depth
[mm]
20
30
Weight
[gr]
2120
2320
Glass Thickness
[mm]
15
15
Round cutout
Cutout line
Round Portlight dimension guide
Outer dimensions
[mm]
X
250
ØA
ØX
Photo: Curtesy of Hanse Yacht
12
www.rutgerson.se
Cut-out dimensions
[mm]
A
230
Customised Portlights
Due to our flexible production facilities and knowledgeable staff, there are endless possibilities for customised portlights. Through
the years we have produced numerous unique models for boats such as Moody 41, Elan, Storebro and many more (see pictures). It is
possible to change shape, colour of the glass, colour of the stainless steel frame or innerframe and constructional alternatives such as
the opening mechanism or hinges. We would be happy to discuss any ideas that our customers might have concerning new designs.
Made for Moody - Germany
Made for Yamarin - Finland
Made for Paragon - Sweden
Made for Elan - Slovenia
Made for Elan - Slovenia
Made for Moody - Germany
Made for Bella boats - Finland
Portlights 13
Accessories Portlights
Rectangular
Oval
Elliptical
Round
Inner frames
Part no
Product description
Function
Inner frame
Size [mm]
A1480-20RF
A1480-20CH
A1480-20OW
A1485-20RF
A1485-20OW
Oval portlight
Oval portlight
Oval portlight
Oval portlight
Oval portlight
Opening
Opening
Opening
Fixed
Fixed
Stainless steel
Chrome
Off-white
Stainless steel
Off-white
403 x 204
403 x 204
403 x 204
403 x 204
403 x 204
A2480-17OW
A2480-17RF
A2485-17OW
A2485-17RF
A2480-18CH
A2480-18OW
A2480-19CH
A2480-19OW
A2480-20CH
A2480-20OW
A2485-20CH
A2485-20OW
Rectangular portlight
Rectangular portlight
Rectangular portlight
Rectangular portlight
Rectangular portlight
Rectangular portlight
Rectangular portlight
Rectangular portlight
Rectangular portlight
Rectangular portlight
Rectangular portlight
Rectangular portlight
Opening
Opening
Fixed
Fixed
Opening
Opening
Opening
Opening
Opening
Opening
Fixed
Fixed
Off-white
Stainless steel
Off-white
Stainless steel
Chrome
Off-white
Chrome
Off-white
Chrome
Off-white
Chrome
Off-white
370 x 164
370 x 164
370 x 164
370 x 164
428 x 179
428 x 179
700 x 191
700 x 191
402 x 195
402 x 195
402 x 195
402 x 195
A3480-19RF
A3480-19CH
A3480-19OW
A3480-22RF
A3480-22CH
A3480-22OW
A3485-19RF
A3485-19OW
A3485-22RF
A3485-22OW
Elliptical portlight
Elliptical portlight
Elliptical portlight
Elliptical portlight
Elliptical portlight
Elliptical portlight
Elliptical portlight
Elliptical portlight
Elliptical portlight
Elliptical portlight
Opening
Opening
Opening
Opening
Opening
Opening
Fixed
Fixed
Fixed
Fixed
Stainless steel
Chrome
Off-white
Stainless steel
Chrome
Off-white
Stainless steel
Off-white
Stainless steel
Off-white
450 x 195
450 x 195
450 x 195
485 x 225
485 x 225
485 x 225
450 x 195
450 x 195
485 x 225
485 x 225
A4480-25OW
Round portlight
Opening
A1999-209
A3999-199
A3999-299
Off-white
A2999-189
A2999-169
A2999-179
A2999-199
Aluminium Templates
14
Part no
Product description
Size [mm]
A1999-209
A2999-169
A2999-179
A2999-189
A2999-199
A3999-199
A3999-229
Template Oval Portlight
Template Rectangular Portlight
Template Rectangular Portlight
Template Rectangular Portlight
Template Rectangular Portlight
Template Elliptical Portlight
Template Elliptical Portlight
403 x 204
370 x 164
428 x 179
700 x 191
402 x 195
450 x 195
485 x 225
www.rutgerson.se
250
A1490
Mosquito Net
Part No
A1490
A2490
A2497
A2498
A2499
A3492
A34925
A3498
A34985
A6-001
A2490
Product description
Oval Portlight
Rectangular Portlight
Rectangular Portlight
Rectangular Portlight
Rectangular Portlight
Elliptical Portlight
Elliptical Fixed Portlight
Elliptical Portlight
Elliptical Fixed Portlight
Universal All Portlights
A3492
Size [mm]
403 x 204
402 x 195
370 x 164
428 x 179
700 x 191
485 x 225
485 x 225
450 x 195
450 x 195
A6-001
Spare Parts
Part No
A1-001
A2-001
A1-001
Product description
Opening knob kit
Hinge kit
A2-001
A1300-200
A2300-200
Spare acrylic glass
Part no
Product description
A1300-200
Acrylic glass Oval Portlight Tinted
A2300-170
Acrylic glass Rectangular Portlight Tinted
A2300-180
Acrylic glass Rectangular Portlight Tinted
A2300-190
Acrylic glass Rectangular Portlight Tinted
A3300-190
Acrylic glass Elliptical Portlight Tinted
A2300-200
Acrylic glass Rectangular Portlight Tinted
A3300-220
Acrylic glass Elliptical Portlight Tinted
A4300-250
Acrylic glass Round Tinted
A3300-220
Portlight
size [mm]
403 x 204
307 x 164
428 x 179
700 x 191
450 x 195
402 x 195
485 x 225
250
Glass
size [mm]
350 x 152
315 x 110
375 x 125
645 x 135
400 x 145
350 x 145
435 x 175
200
Portlights 15
HATCHES
Using the best materials available, stainless steel, acrylic and composite, we offer a stunning range of hatches. There are three ranges with
different design and application. The hatch frames have no welded seams to maximise the strength and integrity when confronted with
the worst elements at sea. All hatches are CE approved for Area 2a.
Area 2a
Delivery time for our hatches is approximately 4 weeks. For detailed information, please see the specific hatch line.
Rutgerson Rund Classic Hatch
Rutgerson classic half-round Hatch
Photo: Curtesy of Windy Boats
16
Rutgerson Exclusive Flush Hatch
www.rutgerson.se
Classic Hatches
Round Ø500 mm
Half-round Ø500 mm
Square 556x556 mm
Square 456x456 mm
Rectangular 556x276 mm
Master Flush Hatches
Square size 10
Square size 44
Exclusive Flush Hatches
Round Ø500 mm
Rectangular 200x340 mm
Square 500x500 mm
Hatches 17
Classic Hatch Line
Our Classic Hatch Line has an elegant, timeless design due to its seamless construction and mirror-polished frame. The hatch lid combines
the highest grade Swedish stainless steel and acrylic glass. The frame is made of an extremely strong, UV-resistant composite material. The
classic range is designed to compliment the aesthetics of all types of boats and generate a retro, classy feeling.
The hatches are available in different shapes: Round, square, half-round and rectangular. The thickness of the acrylic glass for the Classic
Hatch range is 10mm.
H0111-4403
H0211-5203
H0311-0503
H1111-5503
H0411-2503
H1311-5503
Classic Hatch Line
Part No
H0311-0503
H1311-0503
H0411-2503
H0111-4403
H0111-5503
H1111-4403
H1111-5503
H0211-5203
Product description
Round hatch
Round hatch with air vent
Half-round hatch
Square hatch
Square hatch
Square hatch with air vent
Square hatch with air vent
Rectangular hatch
Dimension
[mm]
500
500
500
456x456
556x556
456x456
556x556
276x556
Height
[mm]
27
27
27
27
27
27
27
27
Classic Hatch Accessories
Master Flush Hatch Line
Dimension
Product description
[mm]
Hatch 44
512x512
Hatch 44
512x512
Universal Mosquito Net
Hatch 10
330x330
Hatch 10
330x330
Part No
Hatch
type
H9-001
Universal
Height
[mm]
31
31
31
31
Weight
[gr]
6700
6500
2900
2800
Outer handles
Stainless steel
Composite black
Stainless steel
Composite black
Stay
Manual
Manual
Manual
Manual
40
Part No
H4400-1413
Ø173
H4400-1411
H1000-1413
H1000-1411
Weight
[gr]
4200
4700
3800
4200
7000
4950
7100
4100
8-25
Exclusive Flush Hatch Line
18
Dimension
Part No
Product description
[mm]
HF6111-2300 Rectangular hatch teak deck
200x340
200x340
(Ø97)HF7111-2300
Cutout hole Ø100 Rectangular hatch GRP* deck
HF6111-5500 Square hatch teak deck
500x500
Ø133
HF7111-5500
Square hatch GRP deckAir vent
500x500
HF6311-0500 Round hatch teak deckPart no Diameter
500[mm]
HF7311-0500 Round hatch GRP deckH9-170
500
173
www.rutgerson.se
Weight
Height
[gr]
[mm]
Stay
1.5
5000
Gas
1.5 Air vent
5000
Gas
1.5
9500
Gas
1.5
9500
Gas
1.5 [mm] 9500
Height
Weight [gr]GasAir opening [mm3]
1.540
9500 655
Gas
3580
Hatch Accessories
H9-001
Universal Mosquito Net
Part No
H9-001
Hatch type
Universal
Accessories for Classic and Exclusive Flush Hatch
Air
vent description
Part No
Product
Part no Diameter [mm] Height [mm] Weight [gr]
H2-380
Manual stay part173
H9-170
40
655
H5-001
Composite handle, left
Composite handle, right
H5-002
Stainless steel outer handle and composite
H5-003
inner handle, left
Stainless steel outer handle and composite
H5-004
inner handle, right
HANDLES for Master Flush Hatch
Part No
Product description
H8-001
Stainless steel handle, left
H8-002
Stainless steel handle, left
H8-003
Stainless steel handle, right
H8-004
Stainless steel handle, right
H5-001
H5-002
Air opening [mm3]
3580
H5-004
H5-003
Classic Hatches cutout
INNERFRAMES Classic Hatches
Part No
Product description
H71-443
400x400 Square Off-white innerframe
H71-553
500x500 Square Off-white innerframe
H71-558
500x500 Square Beige innerframe
H72-523
Rectangular Off-white innerframe
H73-053
Round Off-white innerframe
H73-058
Round Beige innerframe
H74-253
Half-round Off-white innerframe
Classic Hatches
Shape of hatch
Round
Half-round
Square 500x500
Square 400x400
Rectangular
Outer
dimensions
[mm]
XxY
530 x 545
570 x 380
556 x 576
456 x 476
556 x 296
Master Flush Hatches
A
Ø482
522
508
408
508
Cut-out dimensions
[mm]
B
C Radius
312
51
508
34,5
408
34,5
228
34,5
D Radius
265
-
Hatches 19
Master Flush Hatch Line
The Rutgerson Master Flush hatches are at this stage available in sizes 10 and 44. The Master Line has a modern, trendy design that will
give the boat a sporty image. As the name implies, the Master Flush hatch Line is flush but requires a recess on the deck. Once the recess
is in place, however, the hatch is incredibly easy to install. The hatches consist of a faced, tinted acrylic glass and a frame made out of a
high-tech composite. The handles can either be made of stainless steel or composite.
The combination of clever construction and the unique innovation of a composite frame results in the lightest and most durable hatch yet.
The thickness of the acrylic glass for the Master Flush Hatch range is 12mm.
At a later stage size 60 will also be available, which will display the same superior level of performance as our existing hatches.
The Master Flush Line conforms to the CE standards EN ISO 12216:2002, EN ISO 9094-1 and EN ISO 9094-2.
H4400-1415
H1000-1401
Master Flush Hatch Line
Part No
H1000-1401
H1000-1403
H1000-1405
H4400-1411
Product description
Hatch 10
Hatch 10
Hatch 10
Hatch 44
H4400-1413
H4400-1415
Hatch 44
Hatch 44
Dimension
[mm]
330x330
330x330
330x330
512x512
Height
[mm]
31
31
31
31
512x512
512x512
31
31
Weight [gr]
2810
2810
2810
5350
5350
5350
Stay
Inner / Outer handles
Composite black
Composite/stainless steel
Stainless steel
Composite black
Friction hinges
Friction hinges
Friction hinges
Manual
Composite/stainless steel
Stainless steel
Manual
Manual
Master Flush Hatch cutout
H8-001
H8-004
Classic Hatches
Shape of hatch
H8-003
H8-002
Accessories for Master Flush Hatch
Part No
Product description
H8-001
Stainless steel handle, left
H8-002
Stainless steel handle*, left
H8-003
Stainless steel handle*, right
H8-004
Stainless steel handle, right
H8-007
Manual stay spare part
* With stay attachment
20
Round
Half-round
Square 500x500
Square 400x400
Rectangular
Outer
dimensions
[mm]
XxY
530 x 545
570 x 380
556 x 576
456 x 476
556 x 296
A
Ø482
522
508
408
508
Cut-out dimensions
[mm]
B
C Radius
312
51
508
34,5
408
34,5
228
34,5
A
260
442
Cut-out dimensions
[mm]
B
C Radius
260
42,5
442
42
Master Flush Hatches
Shape of hatch
Square size 10
Square size 44
Outer
dimensions
[mm]
XxY
330 x 330
512 x 512
Exclusive Flush Hatches
www.rutgerson.se
D Radius
265
-
Exclusive Flush Hatch Line
The Exclusive Flush hatch is the most luxurious hatch that you will find on the market. It is completely unique due to its stainless steel
frame. This model is completely flushed against the deck, giving the boat a smooth and streamlined impression.
The boat designer can optimise the total construction of the deck due to the flush hatches’ draining system, which is incorporated into the
frame. Another unique aspect of this hatch is that the drainage hole is covered by a screen to prevent dirt from clogging up the drainage
pipe.
The exclusive flush hatch does not require a recess on deck for installation. This is a very flexible solution, and it is possible to offer this
model
asHatch
a moreLine
luxurious option to the customer.
Classic
Dimension
Height
Weight
The flush hatch comes in two versions, one that suits
teak-wooded
decks and
another for glass reinforced polyester decks. The different
Part No
Product description
[mm]
[mm]
[gr]
sizes
are
200x340mm,
500x500mm
and
a
round
hatch
with
the
diameter
500mm.
These factors offer the customer the opportunity to
H0311-0503
Round hatch
500
27
4200
H1311-0503
Round
hatch with
vent
500
4700for the Exclusive Flush Hatch range is 15mm.
choose
a hatch that
matches
the air
boat
perfectly. The thickness
of the27acrylic glass
H0411-2503
Half-round hatch
500
27
3800
H0111-4403
Square hatch
456x456
27
4200
H0111-5503FlushSquare
556x556
27
7000
Rutgerson
Hatch hatch
Line conforms to the CE standards
EN ISO 12216:2002
and EN ISO 9094-1 & 2
H1111-4403
Square hatch with air vent
456x456
27
4950
H1111-5503
Square hatch with air vent
556x556
27
7100
H0211-5203
Rectangular hatch
276x556
27
4100
Master Flush Hatch Line
Part No
H4400-1413
H4400-1411
H1000-1413
H1000-1411
Dimension
[mm]
512x512
512x512
330x330
330x330
Product description
Hatch 44
Hatch 44
Hatch 10
Hatch 10
Height
[mm]
31
31
31
31
HF7111-2300
Outer handles
Stainless steel
Composite black
Stainless steel
Composite black
HF7111-5500
Exclusive Flush Hatch Line
Part No
HF6111-2300
HF7111-2300
HF6111-5500
HF7111-5500
HF6311-0500
HF7311-0500
Weight
[gr]
6700
6500
2900
2800
Product description
Rectangular hatch teak deck
Rectangular hatch GRP* deck
Square hatch teak deck
Square hatch GRP
deck Hatches
Classic
Round hatch teak deck
Round hatch GRP deck
Shape of hatch
Round
Half-round
Square 500x500
Square 400x400
Rectangular
Stay
Manual
Manual
Manual
Manual
HF7311-0500
Weight
Dimension
Height
[gr]
[mm]
[mm]
Stay
200x340
1.5
5000
Gas
Core benefits
5000
Gas
200x340
1.5
9500
Gas
500x500
1.5
• Does not require a recess on the deck 9500
Gas
500x500
1.5
or change in the mold for installation. 9500
Gas
500Outer
1.5
Just cut out the hole.
500
9500 Cut-outGas
dimensions 1.5
dimensions
[mm]
[mm]
XxY
A
B
C Radius D Radius
530 x 545
Ø482
570 x 380
522
312
51
265
556 x 576
508
508
34,5
456 x 476
408
408
34,5
556 x 296
508
228
34,5
-
Exclusive Flush Hatch cutout
Master Flush Hatches
Shape of hatch
Square size 10
Square size 44
Outer
dimensions
[mm]
XxY
330 x 330
512 x 512
A
260
442
Cut-out dimensions
[mm]
B
C Radius
260
42,5
442
42
Exclusive Flush Hatches
Shape of hatch
Round
Rectangular
Square 500x500
Outer
dimensions
[mm]
XxY
Ø610
454 x 309
614 x 614
Cut-out dimensions
[mm]
A
B
C Radius
Ø590
435
290
100
595
595
99,5
Hatches 21
BLOCKS
The Rutgerson block assortment is unique in its design and functionality. The key to its success is that both the sheave and the cheeks are
produced from a high-tech composite material of such a great strength that no stainless steel reinforcement is needed. Consequently, the
overall weight is dramatically reduced. The new material has “smooth touch” properties and the work load is clearly marked in order to
avoid uncertainty.
Spherical plain bearings are used for our assortment, which render the blocks very strong and completely maintenance free. Plain bearings
will never deform under static high loads like ball bearings and our blocks do not require the initial excess of power for the sheave to start
moving, which is a common problem with ball bearing blocks.
The entire production chain takes place at our premises in Marstrand. In-house sailing experience together with advanced engineering ensures that you can rely on our blocks in all weather conditions! They are incredibly versatile as
they are suitable for both inshore and offshore sailing, ranging from dinghies to racing yachts. They can also easily
be adapted to your needs and your boat due to a range of different fastening alternatives.
The Rutgerson wire block assortment has a vast range of application areas and can take loads up to six
tons. They are made of Swedish high-grade stainless steel of the highest quality available. The
blocks have been optimised for wires. The blocks have an elegant design and are completely
maintenance free. The wire blocks are perfect as for example back stay adjusters.
At Rutgerson we demand total reliability from all our products.
22
www.rutgerson.se
2,00
1,97
1,88
1,80
1,73
1,60
1,53
1,40
Load factor
1,29
1,20
1,00
1,00
0,80
0,68
0,60
0,40
0,35
0,20
0,00
0°
10°
20°
30°
40°
50°
60°
70°
80°
90°
100°
110°
120°
130°
140°
150°
160°
170°
180°
Deflection angle (ɸ)
The block load is determined by the angle of the lines. If the pulling force from the lines are coming from the direct opposite
side of the attachment point of the block, then the load factor will be 200%. So if you have 100 kg of force in the lines and
the deflection angle is 0° (line force 180° from block attachment) then the block load will be 200 kg. And if the line force is
150 kg and the deflection angle is 100° then the block load will be 194 kg (150kg * 1,29 = 193,4)
Block 23
35mm Block
B300301B
B300302B
B300303B
B300304B
B300305B
B300321B
B300322B
B300323B
B300324B
B300371B
B300372B
B300381B
B300382B
B300383B
B300384B
Core benefits
•
•
•
•
•
•
High-tech composite material
Spherical plain bearings
Large range
Extensive range of fastening alternatives
Adjustable clam cleats
For rope diameters of 3-8mm
Black line 35 mm
Part no
Product description
B300301B
Single
B300302B
Single w becket
B300303B
Single w cam
B300304B
Single w cam & becket
B300305B
Single w strap head
B300321B
Fiddle
B300322B
Fiddle w becket
B300323B
Fiddle w cam
B300324B
Fiddle w cam & becket
B300371B
Double
B300372B
Double w becket
B300381B
Triple
B300382B
Triple w becket
B300383B
Triple w cam
B300384B
Triple w cam & becket
Maximum load of cams is 100 kg
24
A
Sheave Ø
[mm]
35
35
35
35
35
35/20
35/20
35/20
35/20
35
35
35
35
35
35
B
C
Length
[mm]
55
75
55
75
55
80
100
80
100
55
75
55
75
55
75
Shackle
pin Ø
[mm]
4
4
4
4
4
4
4
4
5
5
4
4
4
4
www.rutgerson.se
Safe working
load
[kg]
450
450
450
450
450
450
450
450
450
450
450
450
450
450
450
Breaking
load
[kg]
850
850
850
850
850
850
850
850
850
850
850
850
850
850
850
Rope
diameter
[mm]
3-8
3-8
3-8
3-8
3-8
3-8
3-8
3-8
3-8
3-8
3-8
3-8
3-8
3-8
3-8
Weight
[gr]
50
56
149
160
35
62
70
113
121
91
98
100
107
153
160
Core benefits
B700301
Wire Block
Part no
B700301
Product description
Wire block
A
B
C
Sheave Ø
[mm]
35
Length
[mm]
63
Pin Ø
[mm]
6
B300344B
Cheek blocks
Part no
B300344B
B300345B
B300346B
Product description
Cheek block flat plate
Cheek block horizontal plate
Cheek block curved plate
Safe working
load
[kg]
600
B300345B
•
•
•
•
Best quality stainless steel
Numerous sizes
Elegant design
For wire diameters of 3mm
Breaking
load
[kg]
1200
Wire
diameter
[mm]
3
Weight
[gr]
58
B300346B
A
D
E
Sheave Ø
[mm]
35
35
35
Length
[mm]
50
74
50
Width
[mm]
48
23
44
Safe working
load
[kg]
450
450
450
Breaking
load
[kg]
850
850
850
Rope
diameter
[mm]
3-8
3-8
3-8
Weight
[gr]
70
70
70
M5 mounting screws
¹ Recommed profile radius 190 - 400mm
² Recommed profile radius 30 - 50mm
Block 25
50mm Block
B300501B
B300502B
B300503B
B300504B
B300505B
B300521B
B300522B
B300523B
B300524B
B300571B
B300572B
B300581B
B300582B
B300583B
B300584B
Core benefits
•
•
•
•
•
•
High-tech composite material
Spherical plain bearings
Large range
Extensive range of fastening alternatives
Adjustable clam cleats
For rope diameters of 4-12mm
Black line 50mm
Part no
Product description
B300501B Single
B300502B Single w becket
B300503B Single w cam
B300504B Single w cam & becket
B300505B Single w strap head
B300521B Fiddle
B300522B Fiddle w becket
B300523B Fiddle w cam
B300524B Fiddle w cam & becket
B300571B Double
B300572B Double w becket
B300581B Triple
B300582B Triple w becket
B300583B Triple w cam
B300584B Triple w cam & becket
Maximum load of cams is 160 kg
26
A
Sheave Ø
[mm]
50
50
50
50
50
50/25
50/25
50/25
50/25
50
50
50
50
50
50
B
C
Length
[mm]
80
100
80
100
80
118
139
118
139
80
100
80
100
80
100
Shackle
pin Ø
[mm]
5
5
5
5
5
5
5
5
6
6
5
5
5
5
www.rutgerson.se
Safe working
load
[kg]
700
700
700
700
700
700
700
700
700
700
700
700
700
700
700
Breaking
load
[kg]
1250
1250
1250
1250
1250
1250
1250
1250
1250
1250
1250
1250
1250
1250
1250
Rope
diameter
[mm]
4 - 12
4 - 12
4 - 12
4 - 12
4 - 12
4 - 12
4 - 12
4 - 12
4 - 12
4 - 12
4 - 12
4 - 12
4 - 12
4 - 12
4 - 12
Weight
[gr]
116
127
220
231
80
132
163
232
270
195
197
205
225
300
380
Core benefits
B700501
Wire Block
A
B
C
Part no
B700501
Sheave Ø
[mm]
50
Length
[mm]
75
Pin Ø
[mm]
8
Product description
Wire block
B300544B
Cheek blocks
Part no
B300544B
B300545B
B300546B
Product description
Cheek block flat plate
Cheek block horizontal plate
Cheek block curved plate
Safe working
load
[kg]
1000
B300545B
•
•
•
•
Best quality stainless steel
Numerous sizes
Elegant design
For wire diameters of 4-5mm
Breaking
load
[kg]
2000
Wire
diameter
[mm]
4 -5
Weight
[gr]
113
B300546B
A
D
E
Sheave Ø
[mm]
50
50
50
Length
[mm]
80
94
79
Width
[mm]
45
40/16
45
Safe working
load
[kg]
700
700
700
Breaking
load
[kg]
1250
1250
1250
Rope
diameter
[mm]
4 -12
4 -12
4 -12
Weight
[gr]
140
140
140
M5 mounting screws
¹ Recommed profile radius 190 - 400mm
² Recommed profile radius 30 - 50mm
Block 27
60mm Block
B300601B
B300602B
B300603B
B300604B
B300605B
B300621B
B300622B
B300623B
B300624B
B300671B
B300672B
B300681B
B300682B
B300683B
B300684B
Core benefits
•
•
•
•
•
•
High-tech composite material
Spherical plain bearings
Large range
Extensive range of fastening alternatives
Adjustable clam cleats
For rope diameters of 6-14mm
Black line 60mm
Part no
B300601B
B300602B
B300603B
B300604B
B300605B
B300621B
B300622B
B300623B
B300624B
B300671B
B300672B
B300681B
B300682B
B300683B
B300684B
Product description
Single
Single w becket
Single w cam
Single w cam & becket
Single w strap head
Fiddle
Fiddle w becket
Fiddle w cam
Fiddle w cam & becket
Double
Double w becket
Triple
Triple w becket
Triple w cam
Triple w cam & becket
A
B
C
Sheave Ø
Length
Shackle pin
Ø
Safe working load
Breaking
load
Rope
diameter
Weight
60
60
60
60
60
60/35
60/35
60/35
60/35
60
60
60
60
60
60
94
118
94
118
94
142
164
142
164
94
118
94
118
94
118
6
6
6
6
6
6
6
6
8
8
6
6
6
6
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
1150
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
2100
6 - 14
6 - 14
6 - 14
6 - 14
6 - 14
6 - 14
6 - 14
6 - 14
6 - 14
6 - 14
6 - 14
6 - 14
6 - 14
6 - 14
6 - 14
205
220
305
320
140
265
279
370
375
350
360
390
404
490
500
[mm]
[mm]
[mm]
Maximum load of cams is 200 kg
28
www.rutgerson.se
[kg]
[kg]
[mm]
[gr]
Core benefits
B700601
Wire Block
Part no
B700601
Product description
Wire block
A
B
C
Sheave Ø
[mm]
Length
[mm]
Pin Ø
[mm]
60
93
B300644B
Cheek blocks
Part no
B300644B
B300645B
B300646B
Product description
Cheek block flat plate
Cheek block horizontal plate
Cheek block curved plate
8
Safe working load
[kg]
1500
•
•
•
•
Best quality stainless steel
Numerous sizes
Elegant design
For wire diameters of 6-7mm
Breaking
load
[kg]
3000
B300645B
D
E
Sheave Ø
[mm]
Length
[mm]
Width
[mm]
98
110
97
6-7
Weight
[gr]
175
B300646B
A
60
60
60
Wire
diameter
[mm]
57
50/21
55
Safe working load
[kg]
800
800
800
Breaking
load
[kg]
1600
1600
1600
Rope
diameter
[mm]
6 - 14
6 - 14
6 - 14
Weight
[gr]
240
240
240
M5 mounting screws
¹ Recommed profile radius 190 - 400mm
² Recommed profile radius 30 - 50mm
Block 29
80mm Block
B300801B
B300802B
B300821B
B300805B
B300822B
Core benefits
Black line 80 mm
Part no
B300801B
B300802B
B300805B
B300821B
B300822B
Product description
Single
Single with becket
Single webbing
Fiddle
Fiddle with becket
A
B
Sheave Ø
[mm]
80
80
80
80
80
Length
[mm]
130
165
130
195
225
C
Shackle
pin Ø
[mm]
10
10
10
10
•
•
•
•
•
High-tech composite material
Spherical plain bearings
Large range
Extensive range of fastening alternatives
For rope diameters of 10-16mm
Breaking
load
[kg]
3600
3600
3600
3600
3600
Safe working load
[kg]
2000
2000
2000
2000
2000
Rope
diameter
[mm]
8 - 18
8 - 18
8 - 18
8 - 18
8 - 18
Weight
[gr]
557
599
333
701
739
Core benefits
B700801
Wire Block
Part no
B700801
B700101
B700121
30
Product description
Wire block
Wire block
Wire block
A
B
C
Sheave Ø
[mm]
80
100
120
Length
[mm]
120
150
180
Pin Ø
[mm]
10
14
16
www.rutgerson.se
Safe working
load
[kg]
2750
4000
6000
•
•
•
•
Best quality stainless steel
Numerous sizes
Elegant design
For wire diameters of 8-12mm
Breaking
load
[kg]
5500
8000
12000
Wire
diameter
[mm]
8
10
12
Weight
[gr]
343
685
1135
Toggle-head blocks
Fixed toggle-head 14
Fixed
toggle-head fastening
12
Toggle-head
Toggle-head fastening
Part no
B300301BF
Part
no
B300501BF12
B300301BF
B300501BF14
B300501BF12
B300601BF12
B300501BF14
B300601BF14
B300601BF12
B300801BF
B300601BF14
B300301BT
B300801BF
B300501BT12
B300301BT
B300501BT14
B300501BT12
B300601BT12
B300501BT14
B300601BT14
B300601BT12
B300801BT
B300601BT14
B300801BT
Product description
Fixed Toggle-head block 35
Product
description
Fixed Toggle-head
block 50
Fixed
FixedToggle-head
Toggle-headblock
block35
50
Fixed
FixedToggle-head
Toggle-headblock
block50
60
Fixed
FixedToggle-head
Toggle-headblock
block50
60
Fixed
FixedToggle-head
Toggle-headblock
block60
80
Fixed
Toggle-head
Toggle-head
blockblock
35 60
Fixed
Toggle-head
Toggle-head
blockblock
50 80
Toggle-head
Toggle-headblock
block35
50
Toggle-head
Toggle-headblock
block50
60
Toggle-head block 50
Toggle-head block 60
Toggle-head
Toggle-headblock
block60
80
Toggle-head block 60
Toggle-head block 80
A
Toggle-head
12
B
C
Length
B
[mm]
Length
55
[mm]
80
55
80
80
94
80
94
94
130
94
55
130
80
55
80
80
94
80
94
94
130
94
130
Pin
C Ø
[mm]
Pin6Ø
[mm]
6
68
66
88
68
86
86
68
66
8
8
68
8
8
Sheave
A Ø
[mm]
Sheave
35 Ø
[mm]
50
35
50
50
60
50
60
60
80
60
35
80
50
35
50
50
60
50
60
60
80
60
80
Toggle-head
14
D
ForkDwidth Safe working
[mm]
load [kg]
Fork12
width Safe working
380
[mm]
load
[kg]
12
700
12
380
14
700
12
700
12
850
14
700
14
850
12
850
14
1430
14
850
12
380
14
1430
700
12
12
380
14
700
700
12
850
12
14
700
14
850
850
12
14
1430
14
850
14
1430
Breaking
load [kg]
Breaking
700
load
[kg]
1250
700
1250
1250
1540
1250
1540
1540
2600
1540
700
2600
1250
700
1540
1250
1540
1540
1540
1540
2600
1540
2600
Rope diameter
[mm]
Rope diameter
3-8
[mm]
4 - 12
3
8
4 -- 12
46--12
14
46--12
14
610- 14
- 16
63- -14
8
10
16
4 -- 12
3 -- 12
8
4
46--12
14
4 - 12
6 - 14
6
10- 14
- 16
6 - 14
10 - 16
Weight
[gr]
Weight
54
[gr]
111
54
120
111
183
120
190
183
390
190
61
390
124
61
130
124
210
130
270
210
424
270
424
Block Accessories
Snap Shackle fastening
A
Breaking
Safe
A
load
Sheave Ø
working
Breaking
Safe
[kg]
[mm]
load [kg]
Part no
Product description
load
Sheave
working
B3005XXBS
Snap Shackle block 50
50 Ø
500
1400
[kg]
[mm]
load750
[kg]
Part
no
Product
description
B3006XXBS
Snap Shackle
block 60
60
1700
B3005XXBS
Snap
50
500
1400
B3008XXBS
SnapShackle
Shackleblock
block50
80
80
1500
2700
B3006XXBS
Snap Shackle block 60
60
750
1700
The
black
line
blocks
from
Rutgerson
are
available
with
snap
shackles.
Simply
add
the
ending
BS
to
the
standard
block article
B3008XXBS
Snap Shackle block 80
80
1500
2700
number. For example B300501BS.
Note that the safe working load and breaking load differ when the block is fitted with a
snap shackle.
Snap Shackle fastening
Stand Ups
Part no
B600543
B600643
B600843
Product description
Rubber Cone + plate for 50mm
Rubber Cone + plate for 60mm
Rubber Cone + plate for 80mm
Chafe Covers
Part no
B600550
B600551
Part no
B320520B
B320620B
B320680B
E050608
B320520B
Product description
Plastic cone White
Plastic cone Black
B320680B
Product description
Mainsheet tackle 20m
Mainsheet tackle 25m
Mainsheet tackle 35m
Control Line 2x8 m
E050608
System
purchase
4:1
4:1
6:1
-
Weight
Part no
Product description
85
B600543
Rubber Cone + plate for 50mm
85
B600643
Rubber Cone + plate for 60mm
166
B600843
Rubber Cone + plate for 80mm
Stand-ups are suitable for blocks with a standard shackle and are commonly
used for tackles or by the mastbase
Chafe Covers
Part no
B600550
B600551
Product description
Plastic cone White
Plastic cone Black
Mainsheet tackles and lines
Weight
85
85
166
B320620B
Mainsheet tackles and lines
Stand Ups
Block size
[mm]
50
60
60
-
Rope Ø
[mm]
8
10
10
6
Bloc
System
purchase
[m
Part no
Product description
B320520B
Mainsheet tackle 20m
4:1
B320620B
Mainsheet tackle 25m
4:1
B320680B
Mainsheet tackle 35m
6:1
E050608 Stand Ups
Control Line 2x8 m
Weight
Part no
Product description
85
B600543
Rubber Cone + plate for 50mm
85
B600643
Rubber Cone + plate for 60mm
166
B600843
Rubber Cone + plate for 80mm
Chafe Covers
Part no
B600550
B600551
Product description
Plastic cone White
Plastic cone Black
Mainsheet tackles and lines
Part no
B320520B
Block 31
Product description
Mainsheet tackle 20m
System
purchase
4:1
FOOTBLOCKS
Footblocks are a vital part of the deck equipment as they must be able to take very high loads. In fact, the loads imposed on footblocks are
among the highest that a running rigging can generate. Due to the construction and solid materials of Rutgerson footblocks, the load to
size ratio is among the best on the market.
Spherical plain bearings that are typical for Rutgerson blocks outperform ball-bearings constantly and this is also true for our footblocks.
Due to the plain bearing construction, all our blocks are also maintenance free. Another important advantage is the fact that they are
stackable and reversible in order to maximise efficiency.
The footblock assortment is divided into two ranges, anodised aluminium sides and high-tech composite sides.
B300041B
B300061B
B319040B
B319060B
B309081
B309101
B309082
B300081B
Footblocks
Part no
B300041B
B319040B
B300061B
B319060B
B300081B
B309081
B309082
B309101
Product description
Footblock 40 single
Footblock 40 single with jammer
Footblock 60 single
Footblock 60 single with jammer
Footblock 80 single
Footblock 80 single
Footblock 80 double
Fotblock 100 single
A
B
Length
[mm]
82
82
107
107
130
130
130
169
Sheave Ø
[mm]
40
40
60
60
80
80
80
100
C
D
Hole spacing Jammer radius
[mm]
[mm]
49
49
77
60
60
77
74 x 19
74 x 28
74 x 28
102 x 34
-
40 and 60 mm footblocks are stackable - *The upper block when stacked or double has half the SWL / BL
Maximum holding load of the jammer 300 kg
Footblocks
32
Part no
B300041B
B319040B
B300061B
B319060B
Rope diameter
[mm]
4 - 12
4 - 12
8 - 14
8 - 14
B300081B
10 - 18
B309081
B309082
B309101
10 - 18
10 - 18
12 - 20
Bolts
2 x M6
2 x M6
2 x M6
2 x M6
2 x M6,
1 x M8
3 x M8
3 x M8
3 x M10
Weight
[gr]
96
126
162
192
267
550
871
807
www.rutgerson.se
Sides and
sheaves
Composite
Composite
Composite
Composite
Composite
Aluminium
Aluminium
Aluminium
Safe working
load [kg]
600
600
750
750
1500
2980
2980*
3900
Breaking load
[kg]
1200
1200
1500
1500
3000
4200
4200
8000
VIKING SERIES ROPE CLUTCHES
Rope Clutch RC75X
Like the historic Vikings, Rutgerson rope clutches are strong, durable and originate from the North were sailing conditions are tough.
Rutgerson rope clutches can take much higher loads than equivalent sizes of other manufacturers on the market due to a unique combination of clever construction and high-quality materials. The housing is made of a black high-tech composite of high strength, whereas the
other parts are made of either anodized aluminium or stainless steel.
Our rope clutches have a clever solution for endless lines. Due to the fact that the housing can easily be removed from the mounting plate,
the rope clutch can easily be installed on or detached from endless lines such as furling lines. The rope clutch is the only one that can
be installed by one person on the deck.
You will find that the handling of the lines much easier with Rutgerson rope clutches. This is because it is the only rope clutch on the market
fitted with an integrated low-friction sheave, which ensures that the rope runs smoothly - both when winching and when hauling by
hand. Naturally, the clutch allows continued trimming of the rope even when it is in a locked position.
S600701
S600702
Rope clutches RC75X
Product description
Single rope clutch RC75X
Double rope clutch RC75X
Triple rope clutch RC75X
Rope clutch RC75X 5units
A
B
C
Height
[mm]
70
70
70
70
Width
[mm]
39
66
94
154
Length
[mm]
139
139
139
139
S600705
DxE
Max load
[kg]
750
750
750
750
Rope dimensions
[mm]
8 - 12
8 - 12
8 - 12
8 - 12
Hole spacing
[mm]
79 (M6 bolts)
79 x 28 (M6 bolts)
79 x 28 (M6 bolts)
79 x 28 (M6 bolts)
Weight
[gr]
352
618
894
1400
Load and rope diameter comparison between RC75X and RC120X
Performance depends on the rope quality
1200
RC75X
RC120X
1100
1000
900
800
700
Max holding load
Part No
S600701
S600702
S600703
S600705
S600703
600
500
400
300
200
100
0
6
8
10
12
14
16
Rope diameter
”Please note that the test for this diagram has been made on standard polyester ropes so
performance can vary depending on the rope quality such as dyneema.”
Footblocks 33
ROPE CLUTCH RC120X
The bigger rope clutches of the Viking Series, RC120X and RC2000, have been developed especially for modern types rope such as Lycra
and Dyneema.
This rope clutch is based on the same technical concept as the smaller Viking RC75X but has been perfected. The handle has been equipped
with a revolutionary needle-bearing, which gives the RC120X a performance that was unthinkable before. The new handle has a built-in
friction function that ensures that the handle stays in one position, open or closed. Releasing the desired load requires little effort, even
during very heavy loads. It is also possible to quickly and without effort close the rope clutch.
The housing is made of black, high-tech composite and the handle is polished aluminium for an elegant design. When installing the rope
clutch it is either possible use the endless lines concept as the RC75X or installing the complete product at once. Lift the handle until you
can grip the edge of the cam. Hold it up while bringing the handle backwards until the screw hole on the base plate is clearly visible from
above. The RC120X has two hole configurations for installation for maximum flexibility, 70 and 85mm.
Warning: The bigger rope clutches are developed to release the load easily, so make sure when releasing high loads not
to keep your hands close to the rope entrance. Always put the line back on the winch before releasing the load for a safe
rope handling.
NEW
S601201
Rope clutch RC120X
Part No
S600121
S600122
S600123
Product description
Single rope clutch RC120X
Double rope clutch RC120X
Triple rope clutch RC120X
S601202
A
B
C
Height
[mm]
81
81
81
Width
[mm]
38
73
102
Length
[mm]
165
165
165
S601203
DxE
Max load
[kg]
1200
1200
1200
Rope dimensions
[mm]
10-16
10-16
10-16
Hole spacing
[mm]
70 (M6 bolts)
70 x 32 (M6 bolts)
70 x 32 (M6 bolts)
Weight
[gr]
580
1086
1613
Core benefits
• Superior working load
• Easy and clever installation
• Elegant design
• Minimum friction
34
www.rutgerson.se
ROPE CLUTCH RC2000
The largest rope clutch of the Viking Series has the most innovative design yet and is completely unique on the market. It has been developed to take extreme loads up to 2 tons with minimal effect on the rope. Despite the high loads the handle is incredibly smooth to release,
you can lift it with one finger!
The housing is made of black anodised aluminium and the handle comes in either polished aluminium or mirror-polished stainless steel
for a sleek, modern look.
Warning: The bigger rope clutches are developed to release the load easily, so make sure when releasing high loads not
to keep your hands close to the rope entrance. Always put the line back on the winch before releasing the load for a safe
rope handling.
NEW
Rope clutch RC2000
Part No
Product description
S602001
Single rope clutch RC2000
Height
[mm]
Width
[mm]
Length
[mm]
Max load
[kg]
Rope dimensions
[mm]
101
43
200
2000
8-14
Hole spacing
[mm]
140
Rope Clutches 35
Rope Clutch Accessories
S600001
S600025
S600010
S600015
S601026
S601027
Rope clutch accessories
Part No
Product description
S600001
Rope clutch labels
S600015
Replacement handle RC75X
S600010
Spring package for RC75X / RC750HPX
S600025
Cam for RC75X / RC750HPX
S601026
Cam and Handle for RC1000HPX
S601027
Spring package for RC120X / RC1000HPX
T609006
Sealant washer
Hobycat outside Marstrand, our headquarters.
36
www.rutgerson.se
T609006
PADEYES
The Rutgerson padeyes have an incredibly elegant and stream-lined design – a jewel on your deck! They are made of high quality
stainless steel. The padeyes are excellent for mounting blocks on deck or as attachment points for safety lines, staysails, reefing blocks, jibe
preventors and many other application areas.
Flexibility is the main characteristic of Rutgerson padeyes as they can be mounted practically anywhere and can take very heavy loads. Additionally, they
come in three different sizes for maximum use. They adjust themselves to
the angle of the load and fold down when they are without load in order
to minimize the risk of hurting the crew and equipment.
Rutgerson padeyes correspond to the declaration of ”Man overboard prevention” SS-EN ISO 15085:2003.
Core benefits
•
•
•
Wide range of application areas
Very high working load
Stream-lined for aesthetic and
practical reasons
Padeyes
Part no
E030010S
E030020S
E030030S
Product
description
Padeye 14
Padeye 17
Padeye 20
A
[mm]
43
45
60
B
[mm]
40
39
58
C
[mm]
23
27
35
D
[mm]
14
16
21
ØE
[mm]
5.5
6.5
8,5
Safe working load Breaking load
[kg]
[kg]
850
1500
1100
2200
1750
3500
Weight
[gr]
66
75
184








 


Stainless steel fittings
Snap Shackle
A snap shackle is a fast action fastener which can be implemented single handed. It uses a spring activated locking mechanism to close a
hinged shackle, and can be unfastened under load. This shackle is like our other shackles and hooks made of a high-quality stainless steel,
namely AISI316.
Pelican hook
The pelican hook is suitable for several areas of usage, such as the safety
lines. The fitting is made of high-quality stainless steel, namely AISI316.
Both the snap shackles and the pelican hook conform to the following
standard:
Small craft – Man –overboard prevention and recovery ISO 15085:2003
E050070
E050075
Stainless steel fittings
Part No
E050070
E050120
E050075
Product descrition
Snap shackle 70mm
Snap shackle 120mm
Pelican hook
Safe Working
Load [kg]
800
1250
600
Breaking
load [kg]
1400
4000
1200
Weight
[gr]
70
227
67
Dimensions
[mm]
70 x 45
120x 70
75 x 45
Padeyes 37
DECK ORGANISERS
The Rutgerson deck organisers are designed to perfectly match sailors’ needs. The assortment consists of two different ranges. The traditional aluminium range is available in five different sizes with two, three, four, five or six composite sheaves. The extensive range results in
high flexibility, since sailors can choose sizes according individual preference and deck layout.
The new Black Line range is made of black, high-tech composite with either two or four sheaves. Due to the properties of the material,
the
product
weighs-very
little in relation
Deck
organiser
aluminium
sidesto how high the working load is. In addition, the composite has smooth-touch properties and the
black colour matches the rest of the Rutgerson deck hardware assortment.
Composite
Sheavescan be stacked
A on top ofBeach other to maximise
C
The
deck organisers
efficiency of space and each sheave is through-deck bolted, which
Length
Sheave Ø
Hole spacing
Safe working
Breaking load
Rope diameter
Weight
Product
results
in
a
high
breaking
load.
Special
bolts
are
available
separately.
Part no.
[mm]
[mm]
[mm]
load [kg]
[kg]
[mm]
[gr]
description
B600022
2 sheaves
115
40
56
800
B600023
3 sheaves
170
40
56
800
The deck organisers are 31mm high and the sheaves have a diameter of 40mm.
The
B600024
4 sheaves
230
40
56
800
maximum
working
load
is
750kg.
The
recommended
rope
dimensions
are
8-14mm.
B600025
5 sheaves
285
40
56
800
B600026
6 sheaves
340
40
56
800
M8 mounting bolts in all the fixing holes
Aluminium sheaves
Product
description
Part no.
B609022
2 sheaves
B609023
3 sheaves
B609024
4 sheaves
B609025
5 sheaves
B609026
6 sheaves
A
Length
[mm]
115
170
230
285
340
B
Sheave Ø
[mm]
40
40
40
40
40
C
Hole spacing
[mm]
56
56
56
56
56
B
Sheave Ø
[mm]
40
40
C
Hole spacing
[mm]
56
56
M8 mounting bolts in all the fixing holes
Deck organiser - composite sides
Part no
B300022B
B300024B
Product
description
2 sheaves
4 sheaves
A
Length
[mm]
115
170
1800
1800
breaking
load
1800
1800
1800
8 - 14
160
8 - 14
240
of each sheave is 2000kg and
the
8 - 14
320
Deck
organiser
aluminium
sides
8 - 14
405
8 - 14
490
Composite Sheaves
A
Length
S
Product
Part no.
[mm]
description
B600022
115
Safe working
Breaking load
Rope
diameter2 sheaves
Weight
B600023
3 sheaves
170
load [kg]
[kg]
[mm]
[gr]
B600024
4 sheaves
230
850
2000
8 - 14
179
B600025
5 sheaves
285
850
2000
8 - 14
259
B600026
6 sheaves
340
850
2000
8 - 14
339
M8 8mounting
bolts in all
the fixing holes
850
2000
- 14
424
850
2000
8 - 14
509
Aluminium sheaves
A
Length
S
Product
Core benefits
description
Part no.
[mm]
• High working load
2 sheaves
115
• Incredible strength to weightB609022
ratio
170
• Smooth-touch composite withB609023
unique design 3 sheaves
B609024
4 sheaves
230
B609025
5 sheaves
285
Safe working
Breaking load
Rope diameter
Weight
B609026
6 sheaves
340
load [kg]
[kg]
[mm]
[gr]
M8 mounting bolts in all the fixing holes
750
1800
8 - 14
179
750
1800
8 - 14
259
M8 mounting bolts in all the fixing holes
Deck organiser - composite sides
Special Bolt Set
Part no
Size [mm]
B290060-1 M6 x 80
B290060-2 M6 x 120
B290080-0 M8 x 60
B290080-1 M8 x 80
B290080-2 M8 x 120
B290081-1 M8 x 100
B290100-1 M10 x 80
B290100-2 M10 x 120
B290120-2 M12 x 120
Part no
B300022B
B300024B
A
Length
[mm]
115
170
S
M8 mounting bolts in all the fixing holes
Special Bolt Set
Part no
Size [mm]
B290060-1 M6 x 80
B290060-2 M6 x 120
B290080-0 M8 x 60
B290080-1 M8 x 80
B290080-2 M8 x 120
B290081-1 M8 x 100
B290100-1 M10 x 80
B290100-2 M10 x 120
B290120-2 M12 x 120
Nut and bolt set suitable for Rutgerson deck organisers and footblocks
B290080-1
38
Product
description
2 sheaves
4 sheaves
www.rutgerson.se
Nutand
and bolt
bolt set
Nut
set suitable
suitablefor
forRutgerson deck org
Rutgerson deck organisers and
footblocks
B600022
B600023
B600024
B600025
B600026
Core benefits
•
•
•
Deck organiser - aluminium sides
Composite Sheaves
Product
Part no.
description
B600022
2 sheaves
B600023
3 sheaves
B600024
4 sheaves
B600025
5 sheaves
B600026
6 sheaves
A
Length
[mm]
115
170
230
285
340
High working load
Wide range of sizes
Elegant design
B
Sheave Ø
[mm]
40
40
40
40
40
C
Hole spacing
[mm]
56
56
56
56
56
Safe working
load [kg]
800
800
800
800
800
Breaking load
[kg]
1800
1800
1800
1800
1800
Rope diameter
[mm]
8 - 14
8 - 14
8 - 14
8 - 14
8 - 14
B
Sheave Ø
[mm]
40
40
40
40
40
C
Hole spacing
[mm]
56
56
56
56
56
Safe working
load [kg]
850
850
850
850
850
Breaking load
[kg]
2000
2000
2000
2000
2000
Rope diameter
[mm]
8 - 14
8 - 14
8 - 14
8 - 14
8 - 14
Weight
[gr]
179
259
339
424
509
B
Sheave Ø
[mm]
40
40
C
Hole spacing
[mm]
56
56
Safe working
load [kg]
750
750
Breaking load
[kg]
1800
1800
Rope diameter
[mm]
8 - 14
8 - 14
Weight
[gr]
179
259
Weight
[gr]
160
240
320
405
490
M8 mounting bolts in all the fixing holes
Aluminium sheaves
Product
description
Part no.
B609022
2 sheaves
B609023
3 sheaves
B609024
4 sheaves
B609025
5 sheaves
B609026
6 sheaves
A
Length
[mm]
115
170
230
285
340
RC44 Cup, Marstrand 2011
M8 mounting bolts in all the fixing holes
Deck organiser - composite sides
Part no
B300022B
B300024B
Product
description
2 sheaves
4 sheaves
A
Length
[mm]
115
170
M8 mounting bolts in all the fixing holes
Special Bolt Set
Part no
Size [mm]
B290060-1 M6 x 80
B290060-2 M6 x 120
B290080-0 M8 x 60
B290080-1 M8 x 80
B290080-2 M8 x 120
B290081-1 M8 x 100
B290100-1 M10 x 80
B290100-2 M10 x 120
B290120-2 M12 x 120
Nut and bolt set suitable for Rutgerson deck organisers and footblocks
Deck Organisers 39
MAINSHEET SYSTEM
Control the power!
The mainsheet is one of the most exposed parts of a yacht’s equipment due to the extreme level of stress during sailing. The Rutgerson
mainsheet system increases the durability and performance of that part due to its clever construction and Roll-link function. The system
is built up in modules, which makes it easy to adapt to different types of boat and specifications. The tracks and travellers are made of
high-quality anodised aluminium.
Rutgerson is very proud to announce that the product was proclaimed “Best in Test” among other traveller systems available on the market
according to a test performed by the German magazine Segeln in association with Chalmers University (Technical university in Sweden). The test was designed to give an objective measure of the sliding resistance under realistic conditions, with a vertical pre-load
corresponding to rough weather conditions.
“It was found that the Rutgerson slider is superior in horizontal sliding under heavy conditions. Once again it was shown that Roll-links are
clearly superior to ball bearings” (German magazine Segeln)
The unique construction of the track system renders the product completely safe. The travellers cannot be detached from the track by force
or accident, so even if the product breaks under extreme conditions the traveller will stay attached to the track preventing injuries to the
crew and the equipment.
Advantages with Roll-links:
• Maintenance free travellers that will always run smoothly due to the stainless steel link that keeps the rolls apart. This construction
prevents any obstruction or clogging with salt or dirt. The roll-link “cleans itself” due to itsunique construction.
•
Easy to assemble because the rolls are held together with a stainless steel link. The fact that all rolls are held together facilitates both
installation and adjustment.
•
The force is spread over a larger area, which results in a reduction in strain on the material. The balls in ball bearing systems will
deform into an egg-shape under pressure and stop running smoothly. Roll-links will always retain their original shape.
•
The higher stress on the product during rough weather conditions, the better performance.
The Rutgerson mainsheet system will make your sailing experience effortless and hassle-free,
upgrade your boat to the Rutgerson standard.
50 mm System
32 mm System
Boatsize (ft)
40
www.rutgerson.se
2000
3500
1800
3000
1600
2500
1400
Load (Kg)
Load (Kg)
1200
1000
32mm High beam
800
2000
1500
50mm High beam
600
1000
32mm standard
400
50mm standard
500
200
0
0,4
0,5
0,6
0,7
0,8
0,9
1
Span length (m)
1,1
1,2
1,3
1,4
1,5
0
0,4
0,5
0,6
0,7
0,8
0,9
1
1,1
1,2
1,3
1,4
1,5
Span length (m)
The maximum load on the mainsheet track depends on the distance between the sides in the cockpit when the mainsheet
track is unsupported. That distance is called the span length. To obtain the maximum load, measure the distance and insert
in into the graph.
This graph is a general guide to help sailors choose the correct track for their boat. This information is only true when the
track has been fitted according to Rutgerson’s instructions.
Mainsheet System 41
Mainsheet system 32 mm
T610112
T610122
T610111
T610113
T610001
T610021
T610101
T610121
T610212
T610222
T620301
T620005
T620006
All mainsheet travellers, end stops
and tracks are avaiable in black,
anodized aluminium
T610192
T690110 Complete Mainsheet system
Complete Mainsheet System
Part no
T690110
Travellers
Product description
Complete mainsheet system
32mm track
Length
[mm]
Width
[mm]
Safe working
load [kg]
Breaking
load [kg]
Weight
[gr]
1500
67
1000
4000
3100
A
Length
[mm]
78
78
125
125
125
125
155
155
235
235
174
88
58
58
B
Width
[mm]
67
67
67
67
67
67
67
67
67
67
67
67
41
41
Part no
Product description
T610112
Extra short car with shackle
T610122
Extra short car with stand-up
T610111
Short car with shackle and stopper
T610113
Short car with stand-up and stopper
T610001
Short car with shackle
T610021
Short car with stand-up
T610101
Standard car with shackle and sheave
T610121
Standard car with stand-up and sheave
T610212
Long car with double shackle and sheave
T610222
Long car with double stand-up and sheave
T610192
Long car with 2 x 60mm sheaves
T620301
Control line end stops with sheaves
T620005
Adjustable plunger stoppers
T620006
Fixed plunger stoppers
All end stops are packed in pairs
All mainsheet travellers, end stops and tracks are available in black, anodized aluminium. Add "B" to the part no.
42
www.rutgerson.se
Safe working
load [kg]
500
500
1000
1000
1000
1000
1000
1000
2000
2000
1500
-
This 32mm mainsheet system
comes as an assembled set, ready
to be fitted on the deck. The
control lines have to be acquired
separately.
Breaking load
[kg]
3000
3000
4000
4000
4000
4000
4000
4000
4000
4000
4000
-
Weight
[gr]
315
325
325
535
475
485
585
595
1200
1300
980
500
365
300
Tracks
Travellers
Part no
Product description
T610112
Extra short car with shackle
T610122
Extra short car with stand-up
T610111
Short car with shackle and stopper
T610113
Short car with stand-up and stopper
T600100
T610001T601100
Short car with shackle
T610021
Short car with stand-up
T610101
Standard car with shackle and sheave
T610121
Standard carwith stand-up and sheave
T610212
Long car with double shackle and sheave
T610222
Long car with double stand-up and sheave
T610192
Long car with 2 x 60mm sheaves
T620301
Control line end stops with sheaves
T620005
Adjustable plunger stoppers
T604100
T606100
All end stops are packed in pairs
A
Length
[mm]
78
78
118
118
118
118
118
78
235
235
174
88
58
B
Width
[mm]
67
67
67
67
T601201
67
67
67
67
67
67
67
67
41
Safe working
load [kg]
500
500
1000
1000
1000
1000
1000
1000
2000
2000
1500
-
Breaking
load [kg]
3000
3000
4000
4000
4000
4000
4000
4000
4000
4000
4000
-
Weight
[gr]
315
325
325
535
475
485
585
595
1200
1300
980
248
185
Width
[mm]
32
32
32
32
32
Height
[mm]
32
32
32
50
50
Hole spacing
[mm]
75
75
Fasteners
Weight
[gr/m]
1100
1000
800
1900
1790
Tracks
Part no
Product description
T601100
32 mm track for sliding bolt
T600100
32 mm track stop hole
T601201
32 mm track for sliding bolt, bent
T604100
32 mm high beam sliding bolt*
T606100
32 mm high beam stop hole*
Tracks are available in a maximum length of 6000mm and bolts required are M6 (32mm)
* Special washers required for installation, part no T609016
Add ”B” after part no for black anodized aluminium
M6
M6
M6
M6
M6
Accessories
T620352
T620351
T620353
T620001
T620002
T600001
T609006
T310502
T310504
T310505
Accessories mainsheet system 32mm
Part no
T620352
T620351
T620353
T620001
T620002
T600001
T609006
T310502
T310504
T310505
T609016
T605011
Product description
Sheave control line and cleat
Single sheave control line
Double sheave control line
Composite end caps
Composite end caps high beam track
Spare stand-up
Sealant washers
Roll-links (20 rolls) that fit travellers T610111,
T610001, T610101, T610113, T610021,
T610121, T610212, T610222.
Roll-links (24 rolls) that fit traveller T610192.
Roll-links (12 rolls) that fit travellers T610112
and T610122.
Square washers for high beam track
End fitting for high beam track
Weight
[gr]
360
120
230
60
6
70
1
T609016
18
22
T605011
Must be used with high
beam track.
14
7
890
Mainsheet System 43
Mainsheet system 50 mm
T610900
T610920
T610901
T610921
T610902
T610932
T620905
T620906
T630501
T610992
Travellers
All mainsheet travellers, endstops and tracks are
available in black, anodized aluminium.
A
Length
[mm]
130
130
164
164
235
235
174
88
58
58
B
Width
[mm]
73
73
73
73
73
73
73
73
61
61
Part no
Product description
T610900
Short car with shackle
T610920
Short car with stand-up
T610901
Standard car with shackle and sheaves
T610921
Standard car with stand-up and sheaves
T610902
Long car with double shackles and sheaves
T610932
Long car with double stand-ups and sheaves
T610992
Long car with 2 x 80mm sheaves
T630501
Control line end stops with sheaves
T620905
Adjustable plunger stoppers
T620906
Fixed plunger stoppers
All end stops are packed in pairs
All mainsheet travellers, end stops and tracks are available in black, anodized aluminium. Add "B" to the part no.
44
www.rutgerson.se
Safe working load
[kg]
2000
2000
2000
2000
3000
3000
3000
-
Breaking load
[kg]
5000
5000
5000
5000
6800
6800
5000
-
Weight
[gr]
645
690
825
850
1270
1360
1205
510
420
320
Tracks
T603100
Travellers
Part no
Product description
T610900
Short car with shackle
T610920
Short car with stand-up
T610901
Standard car with shackle and sheaves
T610921
Standard car with stand-up and sheaves
T610902
Long car with double shackles and sheaves
T610932
Long car with double stand-ups and sheaves
T610992
Long car with 2 x 80mm sheaves
T630501
Control line end stops with sheaves
T620905
Adjustable
T605100 plunger stoppers
All endstops are packed in pairs
A
B
Length
Width
[mm]
[mm]
130
73
130
73
164
73
164
73
235
73
235
73
174
73
88
73
58
T607100 61
Tracks
Width
Part no
Product description
[mm]
T602100
50 mm sliding bolt
50
T602201
50 mm sliding bolt, bent
50
T603100
50 mm stop hole
50
T605100
50 mm high beam sliding bolt*
50,3
T607100
50 mm high beam stop hole*
50,3
* Special washers required for installation, Part no. T609018
Tracks are available in a maximum length of 6000mm and bolts required are M8 (50mm)
Add "B" to part no. for black anodised aluminium
T602201
Safe working load
[kg]
2000
2000
2000
2000
3000
3000
3000
-
Breaking load
[kg]
5000
5000
5000
5000
T603100
6800
6800
5000
-
Weight
[gr]
645
690
825
850
1270
1360
1205
248
185
Hole spacing
[mm]
75
75
Fasteners
Weight
[gr/m]
1500
1200
1000
3600
3240
Height
[mm]
33,4
33,4
33,4
62
62
M8
M8
M8
M8
M8
17,5
23
T602100
Accessories
T620352
T620351
T620353
T620901
T620902
T600002
T609008
T310503
T310506
Accessories mainsheet system 50mm
Part no
T620352
T620351
T620353
T620901
T620902
T600002
T609008
T310503
T310506
T609018
Product description
Sheave control line and cleat
Single sheave control line
Double sheave control line
Composite end caps
Composite end caps high beam track
Spare stand-up kit
Sealant washers
Roll-links (20 rolls) that fit travellers T610900,
T610902, T610920, T610932
Roll-links (24 rolls) that fit travellers T610901,
T610921 and T610992.
Square washers for 50mm high beam track
Weight
[gr]
360
120
230
100
20
130
1
37
44
14
T609018
Must be used with high
beam track.
Mainsheet System 45
GENOA SYSTEM
It is possible to adapt our genoa system so that it perfectly matches your boat and your needs. The
system is built up in modules with varying application. The genoa travellers come in three sizes for
boats up to 50ft. There are two models available, one with a plunger stop for tracks with stop holes
and the other with a 2:1 control line sheave for tracks with a concealed fastening mechanism.
The centre-pin pivoting main body permits alignment with the sheets, not only sideways but also
across the traveller car. Another crucial advantage with the Rutgerson Genoa traveller is that the
”head” stands up by itself, minimising the risk of chafing/tearing of the sheet. To use the traveller,
either lock the car in place with the plunger stop or fix it in the open position for a “semi-floating”
function.
Rutgerson genoa travellers can be smoothly adjusted under load due to a composite material fitted between the traveller and the track. The two sheaves simulate one larger sheave, giving a low
sheeting point and minimising chafing on all components.
As with all our track systems, no maintenance is required.
1,0
0,9
0,83
0,8
Control line load factor
0,7
0,66
0,6
0,5
0,50
0,4
0,36
0,3
0,23
0,2
0,13
0,1
0,0
0°
5°
10°
15°
20°
25°
30°
35°
40°
45°
50°
55°
60°
65°
70°
75°
80°
85°
90°
Sheet angle (ɸ)
The maximum load on the control line depends on the deflection of the sheet (Φ). In the graph you will find the
load factor for the control line that corresponds to the different sheet angles. To obtain the control line load,
multiply the sheet load with the control line load factor. If the sheet load is 100kg and the sheeting angle is 40
degrees, the control line load is 100 x 0,23 = 23kg.
T652903
T652923
T652902
T652922
T652901
T652921
20
46
25
30
35
40
45
www.rutgerson.se
50
55
60
Boatsize (ft)
Genoa system cars
T652901
T652902
T652903
T652921
T652922
T652923
T652912
Cars
Part no
T652901
T652902
T652903
T652921
T652922
T652923
T652912
Product description
Genoa traveller small with plunger stop
Genoa traveller medium with plunger stop
Genoa traveller large with plunger stop
Genoa traveller small with 2:1 control
Genoa traveller medium with 2:1 control
Genoa traveller large with 2:1 control
Genoa lead block
A
B
Length
[mm]
138
152
176
150
164
188
100
Width
[mm]
46
46
46
46
46
46
46
Safe working load
[kg]
1000
1500
2000
1000
1500
2000
1500
Breaking load
[kg]
2000
3000
4000
2000
3000
4000
3000
Weight
[gr]
610
758
1030
610
758
1030
523
Width
[mm]
32
Height
[mm]
16
Hole spacing
[mm]
75
Fasteners
Weight
Tracks
Part no
T652100
Product description
Stop hole track
M6
Genoa
[gr/m]System 47
850
Tracks
Part no
T652901
T652902
T652903
T652921
T652922
T652923
T652912
Product description
Genoa traveller small with plunger stop
Genoa traveller medium with plunger stop
Genoa traveller large with plunger stop
Genoa traveller small with 2:1 control
Genoa traveller medium with 2:1 control
Genoa traveller large with 2:1 control
Genoa lead block
T652100
Tracks
Part no
Product description
T652100
Stop hole track
Cars T653100
Sliding bolt track*
* Special washers required for installation, Part no. T609008
Part Add
no "B" to part no. for blackProduct
anodised description
aluminium
End stops
T652901
Genoa traveller small with plunger stop
T652902
Genoa traveller medium with plunger stop
no
description
T652903Part Genoa
traveller largeProduct
with plunger
stop
T652001
stopssmall with 2:1 control
T652921
GenoaEnd
traveller
T620301
end stops
sheave
T652922
GenoaControl
travellerline
medium
withwith
2:1 control
T620005
plunger
T652923
GenoaAdjustable
traveller large
with stoppers
2:1 control
T620007
stoppers
T652912
GenoaFriction
lead block
All end stops come in pairs
A
B
Length
[mm]
138
152
176
150
164
188
100
Width
[mm]
46
46
46
46
46
46
46
T653100
Safe working load
[kg]
1000
1500
2000
1000
1500
2000
1500
Product description
T652100
Stop hole track
T653100
Sliding bolt track*
* Special washers required for installation, Part no. T609008
Weight
[gr]
610
758
1030
610
758
1030
523
Fasteners
Width
Height
Hole spacing
Weight
[mm]
[mm]
[mm]
[gr/m]
32
16
75
M6
850
A
B
555
32
16
M8
Length
Width
Safe working load
Breaking load
Weight
[mm]
[mm]
[kg]
[kg]
[gr]
138
46
1000
2000
610
152 Length 46 Width
1500Weight
3000
758
176 [mm] 46 [mm]
2000 [gr]
4000
1030
38
150 39
46
1000 38
2000
610
67
164 88
46
1500 248
3000
758
67
188 58
46
2000 185
4000
1030
67
100 58
46
1500 350
3000
523
End stops
Tracks
Part no
32
Breaking load
[kg]
2000
3000
4000
2000
3000
4000
3000
Width
[mm]
32
32
T620301
Height
[mm]
16
16
Hole spacing
[mm]
75
-
Fasteners
M6
M8
T620005
Weight
[gr/m]
850
555
T620007
End stops
Part no
Product description
T652001
End stops
T620301
Control line end stops with sheave
T620005
Adjustable plunger stoppers
T620007
Friction stoppers
All end stops come in pairs
Length
[mm]
39
88
58
58
Width
[mm]
38
67
67
67
Weight
[gr]
38
248
185
350
T652001
Accessories
Accessories
Part No
T352915
T609008
T620352
Product description
Control line eye for travellers T652901, T652902 and
T652903 for floating control.
8mm Sealant washer
Sheave control line and cam set
T352915
All Genoa travellers, end stops and tracks are available in black
anodized aluminium.
48
15,5
Cars
www.rutgerson.se
T609008
T620352
SELF-TACKING JIB SYSTEM
The Rutgerson self-tacking jib system does all the work for you. It is built around our roll-link traveller system, which can be adjusted to fit
all kinds of boats. The travellers can take oblique loads up to 45 degrees from vertical. Side friction is minimal due to the successful Roll-link
concept. Our self-tacking jib system has been developed and tested to withstand the toughest conditions at sea.
The track can be bent horizontally, vertically or both in a compound bend. For tracks with a radius that is greater than 3700mm or smaller
than 3400mm, a customised track can be ordered.
Like all our track systems, the self-tacking jib is completely maintenance free. Just rinse the track and traveller two or three times per
season with fresh water.
In order to establish the correct bending radius for you boat, please do the following:
1. Measure the distance between the front of the mast and the headstay (“J” measurement).
2. The bending radius should be 95% of “J”.
3. The radius can be altered from 3400mm to 3700mm by gently applying the full body weight onto the track with the upper surface
facing down.
Enjoy hassle-free sailing with the Rutgerson Self-tacking Jib System.
T690191
T690103
T690102
T690101
20
25
30
35
40
45
50
Boatsize (ft)
JIB System 49
Self-tacking Jib System
Part no
T690101
Track width Length of track
[mm]
[mm]
32
2000
Radius
[mm]
3400
Included
Rec. Boat size
articles
Up to 30ft*
T390100
T601201
T610112
T620006
Product description
Self-tacking jib fittings
32mm track
Extra short car with shackle
Pair of fixed stoppers
T690102
32
2000
3400
Up to 33ft*
T390100
T601201
T610112 x 2
T620006
Self-tacking jib fittings
32mm track
Pair of extra short cars with shackles
Pair of fixed stoppers
T690103
32
2000
3400
Up to 40ft*
T390100
T601201
T610001
T620006
Self-tacking jib fittings
32mm track
Short car with shackle
Pair of fixed stoppers
T690191
50
2000
4000
Up to 50fr*
T390190
T602201
T610900
T620906
Self-tacking jib fittings
50mm track
Short car with shackle
Pair of fixed stoppers
* To be considered an approximate measure.
For more information, please visit www.rutgerson.se
50
www.rutgerson.se
GENERAL WARRANTY & KEY TERMS OF SUPPLY BY
RUTGERSON MARIN AB
A)WARRANTY
1) PERIOD OF WARRANTY
Rutgerson Marin AB issues a general warranty time durable for three years against malfunction or breakage from the date of delivery.
2) WARRANTY COVERAGE
Products sold by Rutgerson Marin AB and in normal and customary use, are conditionally warranted against malfunction or breakage. The warranty
does not cover:
i)
ii)
iii)
iv)
v)
Defects or damage resulting from use of the product in other than its normal and customary manner;
Defects or damage from misuse, accident or neglect;
Defects from improper testing, operation, maintenance, installation, alteration, modification or adjustment;
Damage from unauthorized repair or alterations;
Damage from corrosive materials, ultra violet degradation, wear or tear beyond the specification of the case or enclosure.
3) WARRANTY PROCEDURE OF SERVICE OR REPLACEMENT
Notice of a claim for defect, service or replacement covered by this limited warranty shall be made promptly and in writing to the local Rutgerson
distributor that supplied the product or to Rutgerson Marin AB, Box 84, SE-442 19 Marstrand, SWEDEN. Products returned for service or replacement
under this limited warranty must be assigned a valid RGA Return Goods Authorization number by Rutgerson Marin AB. Unidentified and unauthorized
goods returned to Rutgerson Marin AB will NOT be approved or eligible for further investigation.
The customer is responsible for undertaking all expenses associated with transporting the goods to and from Rutgerson Marin AB or the local
Rutgerson distributor that supplied the product. If the investigation of the product and the warranty claim reveals that the defect, malfunction or
breakage is not covered by this limited warranty, the customer will be contacted and advised with respect to additional cost in conjunction with service
or replacement.
For approved RGA goods, please send these together with assigned RGA documents to:
WARRANTY GOODS
Rutgerson Marin AB
Mjölkekilsgatan 21
SE-442 66 Marstrand
SWEDEN
B) PURCHASE ON APPROVAL
Rutgerson Marin AB issues a general purchase on approval period durable for 60 days after delivery. Products that are subject for return needs to be
unused and delivered to Rutgerson Marin AB in their original packing and according to the procedure stated in section (A3) above. Returned products
will thereafter be subject to investigation and upon approval a 15% handling fee of the original purchase amount will be surcharged to all eventual credits.
For all customized or one-off items, purchase on approval does not apply.
C)SUPPLY
1) PACKING QUANTITY
Products are supplied in stated packing and minimum purchase quantities only. For supply in smaller and/or customized quantities, additional terms will
apply. For further information about alternative supply conditions, please contact Rutgerson Marin AB.
2) DELIVERY TIME
All official delivery times endorsed by Rutgerson Marin AB are estimated and can be subject to changes. Rutgerson Marin AB is in the event of such
related changes legislated to inform the customer.
3) UNANTICIPATED DEFECTS & DELAYS
Rutgerson Marin AB shall not be liable for unanticipated defects/delays, nor shall it be liable for any damage, whether direct or indirect, beyond the
provisions set forth above or otherwise provided to customers under statutory law legislation. In connection with delivery of incorrect or defective
goods, the customer must promptly submit a complaint to Rutgerson Marin AB.
D)DEFINITIONS
1) SAFE WORKING LOAD (SWL)
Is the maximum static and/or dynamic load at which the product will still function without excessive friction, distortion, wear or permanent deformation
of its components. Above this load, systems may fail, moving parts may seize and stainless steel or plastic components may begin to bend, stretch or
otherwise deform. SWL should never exceed 55% of the breaking load (BL), and should never be exceeded in use.
2) BREAKING LOAD (BL)
Is the load at, or around which, a major failure can be expected to occur to some part of the product’s structure when new. Plastic components may split,
rivets may give way, shackles may break and other metallic components may fracture. No product should be used at more than 55% of the breaking load.
51
Rutgerson Deck Hardware Distributor Network
Rutgerson Marin AB is represented on all continents by an impressive network of over 40 local distributors.
All our distributors have a long tradition of serving our customers with dedication and knowledge of
our products and their demands.
For updated information about our distributors, please visit www.rutgerson.se.
Rutgerson Marin AB
Mjölkekilsgatan 21
SE-442 66 Marstrand, Sweden
+46 (0)303-20 66 50
[email protected]
www.rutgerson.se
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement