Datalogic | Touch 65 pro | Technical data | Datalogic Touch 65 pro Technical data

Touch TD1100
General Purpose Corded Handheld
Contact Imager Bar Code Reader
Quick Reference Guide
Datalogic ADC, Inc.
959 Terry Street
Eugene, OR 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
©2012-2014 Datalogic, Inc.
An Unpublished Work - All rights reserved. No part of the contents of this documentation
or the procedures described therein may be reproduced or transmitted in any form or by
any means without prior written permission of Datalogic ADC, Inc. or its subsidiaries or
affiliates ("Datalogic" or “Datalogic ADC”). Owners of Datalogic products are hereby
granted a non-exclusive, revocable license to reproduce and transmit this documentation
for the purchaser's own internal business purposes. Purchaser shall not remove or alter
any proprietary notices, including copyright notices, contained in this documentation and
shall ensure that all notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by
contacting your Datalogic representative. Electronic versions may either be downloadable
from the Datalogic website (www.datalogic.com) or provided on appropriate media. If you
visit our website and would like to make comments or suggestions about this or other
Datalogic publications, please let us know via the "Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is
complete and accurate, however, Datalogic reserves the right to change any specification
at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many
countries, including the U.S.A. and the E.U. All other brand and product names may be
trademarks of their respective owners.
Patents
See www.patents.datalogic.com for patent list.
This product is covered by one or more of the following patents:
Design patents: EP002137570, USD692892, ZL201230602800.2
Utility patents: EP0789315B1, EP1797521B1, US5992740, US6098883, US6454168,
US6561427, US7506816
Table of Contents
Software Product Policy ....................................................................................................v
Customers Under Software Support ...................................................................v
Parts of the Reader ..............................................................................................................1
Holder/Hands-Free Stand ................................................................................................2
Setup ........................................................................................................................................2
Connect/Disconnect Cable .....................................................................................2
Connect Host Interface .............................................................................................3
Touch and Scan ...........................................................................................................4
Programming Bar Codes ..................................................................................................5
Resetting the Standard Product Defaults ..........................................................5
Host Interfaces .............................................................................................................5
RS-232 Interface .................................................................................................6
USB Interface .......................................................................................................7
Keyboard Wedge Interface .............................................................................8
Wand Emulation Interface ..............................................................................8
Scanning Modes ..................................................................................................................9
Scanning Modes (continued) ..................................................................... 10
Troubleshooting ............................................................................................................... 11
Technical Features ........................................................................................................... 12
LED and Beeper Indications ......................................................................................... 14
Ergonomic Recommendations ................................................................................... 14
Regulatory Information .................................................................................................. 15
Power Supply ................................................................................................... 15
Radio Frequency Interference Requirements ....................................... 16
Radio Frequency Interference Requirements - Canada .................... 16
Reader Labeling ....................................................................................................... 16
WEEE Statement ...................................................................................................... 18
Datalogic ADC Limited Factory Warranty ....................................................... 19
Warranty Coverage ........................................................................................ 19
Warranty Claims Process .............................................................................. 19
Warranty Exclusions ....................................................................................... 20
No Assignment ................................................................................................ 20
Risk of Loss ........................................................................................................ 21
Services and Support ...................................................................................................... 21
Quick Reference Guide
i
NOTES
ii
Touch TD1100
TOUCHTM PRODUCT
Datalogic ADC, Inc.
SERIES END USER LICENSE AGREEMENT
Notice to End User: The Datalogic Product you have acquired contains embedded Software, which is integral to the product's operation. This Software is being provided to you under license, subject to the terms
and conditions of this Agreement. If you use the Datalogic Product, you will be deemed to have accepted
the terms and conditions of this Agreement. If you do not intend to be bound to the terms of this Agreement, Datalogic is not willing to license the Software to you, you may not use the Datalogic Product or the
Software, and you must contact the party from whom you acquired the Datalogic Product for instructions.
This End User Software License Agreement ("Agreement") is a legally binding agreement governing the
licensing of the Software and Documentation by Datalogic ADC, Inc. and its Affiliates ("Datalogic") to the
entity or person who has purchased or otherwise acquired a Datalogic Product ("End User"). For purposes
of this Agreement, any software that is associated with a separate end-user license agreement is
licensed to you under the terms of that license agreement. Datalogic and End User hereby agree as follows:
1. Definitions.
1.1 "Affiliate" means a business entity currently existing or later acquired that controls, is controlled by, or
is under common control with Datalogic S.p.A.
1.2 "Documentation" means materials such as user's guides, program reference guides, quick reference
guides, manuals, or similar materials associated with or related to the Datalogic Product, whether in
printed, "online", or other form.
1.3 "Proprietary Information" means: (a) source code, object code, software, documentation, and any
related internal design, system design, data base design, algorithms, technology, technical data or
information, implementation techniques, and trade secrets related to the Software, (b) any other
trade secrets marked appropriately or identified as proprietary or confidential, and (c) any information
that End User, under the circumstances, should recognize as confidential. Proprietary Information
does not include any information that the receiving party can establish was (1) in the public domain,
(2) already in the receiving party's possession or rightfully known prior to receipt, (3) rightfully learned
from a third party not in violation of any other's proprietary rights, or (4) independently developed
without access to Proprietary Information.
1.4 "Datalogic Product" means the DatalogicTM TouchTM series scanner product, including all embedded
Software in and all Documentation related to such product, which has been purchased or otherwise
acquired by End User, whether obtained directly or indirectly from Datalogic.
1.5 "Software" means any software or computer programs of Datalogic or its third party licensors in
machine readable form which is embedded in the Datalogic Product, whether obtained directly or
indirectly from Datalogic, including any replacement, update, upgrade, enhancement or modification.
2. Scope Of License Granted.
2.1 Datalogic grants to End User a non-exclusive, non-transferable, perpetual license to use the Software, solely on the Datalogic Product in which it is embedded ("designated Datalogic Product"), in
machine-readable form only, solely for End User's internal business purposes. This Agreement does
not convey ownership of the Software to End User. Title to the Software shall be and remain with
Datalogic or the third party from whom Datalogic has obtained a licensed right. As used in this Agreement, the term "purchase" or its equivalents when applied to the Software shall mean "acquire under
license." End User is not entitled to receipt or use of the source code to any Software.
2.2 End User shall not copy, modify, decompile, disassemble, reverse engineer, or otherwise reproduce or
remanufacture the Software, whether modified or unmodified, nor sell, assign, sublicense, distribute,
lend, rent, give, or otherwise transfer the Software to any other person or organization, for purposes
other than as expressly provided in this Agreement, without Datalogic's prior written consent.
3. Transfers, Support.
3.1 Any copying, installing, reproduction, remanufacture, reverse engineering, electronic transfer, or other
use of the Software on other than the designated Datalogic Product will be a material breach of this
Agreement. However, Datalogic may elect not to terminate this Agreement or the granted licenses,
but instead may elect to notify End User that End User is deemed to have ordered and accepted a
license for each breaching use. End User shall pay Datalogic the applicable list price for such licenses
as of the date of such breach.
3.2 End User shall not sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Datalogic Product to any third party unless such third party agrees with Datalogic in writing to be bound
by the terms and conditions of this Agreement. Any such transfer of the Datalogic Product absent
such agreement shall be null and void.
3.3 End User may obtain support for Software from Datalogic at Datalogic's standard support fees and
under Datalogic's standard support terms and conditions in effect at the time the support is
requested.
4. Intellectual Property.
End User acknowledges that the Software constitutes valuable trade secrets of Datalogic or Datalogic's
Quick Reference Guide
iii
third party licensors and that the Software is protected by intellectual property laws and treaties. The
license set forth in this Agreement does not transfer to End User any ownership of Datalogic's or its third
party licensors' copyrights, patents, trademarks, service marks, trade secrets, or other intellectual property rights and End User shall have no right to commence any legal actions to obtain such rights. End User
shall not remove, modify, or take any other action that would obscure any copyright, trademark, patent
marking, or other intellectual property notices contained in or on the Datalogic Product.
5. Proprietary Information.
5.1 End User acknowledges that Proprietary Information is the confidential, proprietary, and trade secret
property of Datalogic and Datalogic's third party licensors and End User acquires no right or interest in
any Proprietary Information.
5.2 End User shall not disclose, provide, or otherwise make available the Proprietary Information of Datalogic or its third party licensors to any person other than End User's authorized employees or agents
who are under confidentiality agreement, and End User shall not use the Proprietary Information
other than in conjunction with use of the Datalogic Product exclusively for End User's internal business purposes. End User shall take steps to protect the Proprietary Information no less securely than
if it were End User's own intellectual property.
5.3 The provisions of this Proprietary Information Section shall survive and continue for five (5) years after
the termination of this Agreement.
6. Limited Warranty.
6.1 Datalogic warrants that, under normal use and operation, the Datalogic Product will conform substantially to the applicable Documentation for the period specified in the Documentation. During this
period, for all reproducible nonconformities for which Datalogic has been given written notice, Datalogic will use commercially reasonable efforts to remedy nonconformities verified by Datalogic. End
User agrees to supply Datalogic with all reasonably requested information and assistance necessary
to help Datalogic in remedying such nonconformities. For all defects reported to Datalogic within the
warranty period, Datalogic's liability is limited to providing End User with one copy of corrections or
responding to End User's problem reports according to Datalogic's standard assistance practices. Datalogic does not warrant that the product will meet End User's requirements or that use of the product
will be uninterrupted or error free, or that Datalogic's remedial efforts will correct any nonconformance. This limited warranty does not cover any product that have been subjected to damage or
abuse, whether intentionally, accidentally, or by neglect, or to unauthorized repair or unauthorized
installation, and shall be void if End User modifies the product, uses the product in any manner other
than as established in the Documentation, or if End User breaches any of the provisions of this Agreement.
6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC PRODUCT IS PROVIDED "AS IS" AND DATALOGIC MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, WRITTEN OR ORAL, WITH
RESPECT TO THE PRODUCT, AND SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
7. Infringement.
7.1 Datalogic will defend End User against any claim in a lawsuit that the Datalogic Product furnished
hereunder infringe a United States patent or copyright of a third party and Datalogic will pay any damages finally awarded against End User by a court of competent jurisdiction that are attributable to
such claim or will pay End User's part of any settlement that is attributable to such claim, provided,
that 1) End User notifies Datalogic promptly in writing of the claim, 2) Datalogic controls the defense
or settlement of the claim, and 3) End User cooperates fully with Datalogic in such defense or settlement. All notices of a claim should be sent to Datalogic ADC, Legal Department, 959 Terry Street,
Eugene, OR 97402.
7.2 In the defense or settlement of any such claim, Datalogic may, at its option, 1) procure for End User the
right to continue using the Datalogic Product, 2) modify the Datalogic Product so that it becomes noninfringing, 3) replace the Datalogic Product with an equivalent product not subject to such claim, or 4)
provide End User an opportunity to return the Datalogic Product and receive a refund of the purchase
price paid, less a reasonable allowance for use.
7.3 Datalogic shall have no liability to End User for claims of infringement based upon 1) the use of any
Datalogic Product in combination with any product which Datalogic has not either furnished or authorized for use with such Datalogic Product 2) the use of any Datalogic Product designed, manufactured,
or modified to the specifications of End User, or 3) End User's modification of the Datalogic Product
without written authorization from Datalogic.
7.4 THE FOREGOING STATES DATALOGIC'S COMPLETE AND ENTIRE OBLIGATION CONCERNING CLAIMS OF
PATENT, COPYRIGHT, OR OTHER INTELLECTUAL PROPERTY INFRINGEMENT, CANCELS AND SUPERCEDES ANY PRIOR AGREEMENTS, WHETHER ORAL OR WRITTEN, BETWEEN THE PARTIES CONCERNING SUCH CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CONTEMPORANEOUS,
OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE PARTIES, WHETHER ORAL OR WRITTEN,
EXCEPT AS SET FORTH IN A FUTURE WRITING SIGNED BY BOTH PARTIES.
8. Limitation Of Liability.
EXCEPT AS PROVIDED IN SECTION 7, DATALOGIC SHALL NOT BE LIABLE FOR ANY CLAIMS AGAINST END
USER BY ANY OTHER PARTY. IN NO EVENT SHALL DATALOGIC'S LIABILITY FOR DAMAGES, IF ANY,
iv
Touch TD1100
Software Product Policy
WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, STRICT LIABILITY, WARRANTY, OR ANY OTHER BASIS, EXCEED THE PRICE OR FEE PAID BY END USER FOR THE DATALOGIC PRODUCT. UNDER NO CIRCUMSTANCES SHALL DATALOGIC BE LIABLE TO END USER OR ANY
THIRD PARTY FOR LOST PROFITS, LOST DATA, INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY
OTHER SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL, PUNITIVE, EXEMPLARY, OR
OTHER SIMILAR DAMAGES, EVEN IF DATALOGIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
9. Government Restricted Rights; International Use.
9.1 Use, duplication, or disclosure of the Software by the U.S. Government is subject to the restrictions
for computer software developed at private expense as set forth in the U.S. Federal Acquisition Regulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in Technical Data and Computer Software
clause at DFARS 252.227-7013(c)(1)(ii), whichever is applicable.
9.2 If End User is using the Datalogic Product outside of the United States, End User must comply with
the applicable local laws of the country in which the Datalogic Product is used, with U.S. export control laws, and with the English language version of this Agreement. The provisions of the "United
Nations Convention on International Sale of Goods" shall not apply to this Agreement.
10. Termination.
10.1Either party may terminate this Agreement or any license granted under this Agreement at any time
upon written notice if the other party breaches any provision of this Agreement.
10.2Upon termination of this Agreement, End User immediately shall cease using any nonembedded
software and shall return to Datalogic or destroy all non-embedded software covered by this Agreement, and shall furnish Datalogic with a certificate of compliance with this provision signed by an
officer or authorized representative of End User. For embedded software, End User agrees to sign a
waiver prepared by Datalogic concerning further use of the embedded Software. End User's resumed
or continued use of the embedded Software after termination shall constitute End User's agreement
to be bound by the terms and conditions of this Agreement for such use.
11. General Provisions.
11.1 Entire Agreement; Amendment. This document contains the entire agreement between the parties
relating to the licensing of the Software and supersedes all prior or contemporaneous agreements,
written or oral, between the parties concerning the licensing of the Software. This Agreement may
not be changed, amended, or modified except by written document signed by Datalogic.
11.2 Notice. All notices required or authorized under this Agreement shall be given in writing, and shall be
effective when received, with evidence of receipt. Notices to Datalogic shall be sent to the attention of
Contract Administration, Datalogic ADC, Inc., 959 Terry Street, Eugene, OR 97402, or such other
address as may be specified by Datalogic in writing.
11.3 Waiver. A party's failure to enforce any of the terms and conditions of this Agreement shall not prevent the party's later enforcement of such terms and conditions.
11.4 Governing Law; Venue: This Agreement and the rights of the parties hereunder shall be governed by
and construed in accordance with the laws of the State of Oregon U.S.A, without regard to the rules
governing conflicts of law. The state or federal courts of the State of Oregon located in either Multnomah or Lane counties shall have exclusive jurisdiction over all matters regarding this Agreement,
except that Datalogic shall have the right, at its absolute discretion, to initiate proceedings in the
courts of any other state, country, or territory in which End User resides, or in which any of End User's
assets are located.
11.5 Attorneys' Fees. In the event an action is brought to enforce the terms and conditions of this Agreement, the prevailing party shall be entitled to reasonable attorneys' fees, both at trial and on appeal.
- END -
Software Product Policy
Datalogic reserves the right to ship its products with the latest version of software/firmware available.
This provides our customers with the very latest in Datalogic software technology.
The only exception to this policy is when the buyer has a signed contract with Datalogic that clearly
defines the terms and conditions for making software/firmware changes in products shipped to the
buyer.
Customers Under Software Support
Customers that elect to subscribe to Datalogic Software Maintenance and Support Agreement will
receive 30 days advance notification of: (1) the release of a new software version; and/or (2) discontinuation of any prior software version that will no longer be supported. Datalogic will provide maintenance
for a fee that will assist customers in transitioning to the next software version. If a customer is currently using the software version being discontinued, the customer may elect to transition to any one of
the newer versions, depending on the hardware in use.
To arrange for a Software Maintenance and Support Agreement please contact your Datalogic sales person.
Quick Reference Guide
v
Software Product Policy
NOTES
vi
Touch TD1100
Touch TD1100
Quick Reference Guide
The Touch™ TD1100 series of linear imaging contact readers represent the Datalogic
ADC solution for customers who require a cost-effective solution for close contact bar code
reading without sacrificing quality and performance.
Designed for low throughput applications within multiple markets, the Touch TD1100
readers provide the guarantee of contact reading with an excellent reading performance on
virtually all linear bar codes, including damaged or poorly printed codes.
Small, lightweight and low on energy consumption, the Touch TD1100 readers can still
provide robustness and a 1.5 m / 5.0 ft drop resistance, which is typically included in a higher range of products.
The Touch readers are available with the option of two different sizes of reading windows:
6.5 cm / 2.6 in (Touch 65) or 9.0 cm / 3.5 in (Touch 90), which benefits the user when
reading either standard or wide bar codes.
The Touch 65/90 Pro readers provide a complete all-in-one multi-interface solution, including RS-232, USB, Keyboard Wedge, and Wand Emulation; the Touch Lite 65/90
readers provide USB-only or RS-232 / Keyboard Wedge interfaces.
Parts of the Reader
1
2
3
4
1. Indicator Window
3. Scan Window
2. Cable Release Hole
4. Trigger
Quick Reference Guide
1
Holder/Hands-Free Stand
Holder/Hands-Free Stand
The TD1100 Holder can be used as a hands-free stand. Refer to Scanning Modes on page 9 for information about programming the reader for use with the stand.
Figure 1. Hands-Free Stand
nds Fre
e Mo
de
Setup
Connect/Disconnect Cable
2
Touch TD1100
Setup
Connect Host Interface
Keyboard Wedge Interface
Key
bo
ard
23
2
RS-232 Interface
RS
-
B
USB Interface
US
Quick Reference Guide
3
Setup
Touch and Scan
65°
65°
4
Touch TD1100
Programming Bar Codes
Programming Bar Codes
For your convenience, this guide includes the programming bar codes required to configure
the reader for use with different interface (terminal/host) types.
See the Product Reference Guide (PRG) for more complete information about programming and configurable features. You can download the latest version of the PRG and any
other available publications for the reader from the website listed on the back cover of this
manual.
Resetting the Standard Product Defaults
If you aren’t sure what programming options are in your reader, or you’ve changed some
options and want the factory settings restored, scan the Factory Default Settings bar code
below. This will copy the factory configuration for the currently active interface to the current configuration.
Factory Default Settings
Host Interfaces
Cables may vary depending on system configuration.
NOTE
Some interfaces require the reader to start in the disabled state when
powered on. If additional reader configuration is desired while in this
state, pull the trigger and hold it for five seconds. The reader will
change to a state that allows programming with bar codes.
Quick Reference Guide
5
Programming Bar Codes
RS-232 Interface
To use an RS-232 interface, scan the bar code for the desired RS-232 host type.
Select RS-232 Standard
Select RS-232 Wincor Nixdorf
Select RS-232 OPOS (for use with OPOS/UPOS/JavaPOS)
6
Touch TD1100
Programming Bar Codes
USB Interface
The reader attaches directly to a USB host, or a powered USB hub, and is powered by it.
No additional power supply is required. When using a USB interface, the reader auto-detects the USB and defaults to the USB Keyboard interface.
Select USB-COM-STD1 (simulates RS-232 standard interface)
Select USB Keyboard (with standard key encoding)
Select USB Alternate Keyboard (with alternate key encoding)
Select USB OEM
1. Download the appropriate USB Com driver from www.datalogic.com.
Quick Reference Guide
7
Programming Bar Codes
Keyboard Wedge Interface
To use a Keyboard Wedge interface, scan the bar code for the desired keyboard type.
Select KBD-AT
(AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95
w/Standard Key Encoding)
Select KBD-AT-NK
(IBM AT PS2 with standard key encoding but without external kbd.)
Select KBD-AT-ALT
(AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95
w/Alternate Key)
Select KBD-AT-ALT-NK (for IBM AT PS2 with alternate key
encoding but without external keyboard)
Select KBD-XT (PC/XT w/Standard Key Encoding)
Wand Emulation Interface
To use a Wand Emulation interface, scan the bar code below.
Select WAND
8
Touch TD1100
Scanning Modes
Scanning Modes
If the interface type is changed, scanner configuration may automatically reset to a different Scanning Mode.
NOTE
The reader can operate in one of several scanning modes:
Trigger Single — When the trigger is pulled, scanning is activated until one of the following
occurs:
- a programmable duration1 has elapsed
- a label has been read
- the trigger is released
This mode is associated with typical handheld reader operation: when the trigger is pulled,
scanning starts and the product scans until the trigger is released, or a label is read, or the
maximum programmable duration1 has elapsed.
Trigger Hold Multiple — When the trigger is pulled, scanning starts and the product scans
until the trigger is released or a programmable duration1 has elapsed. Reading a label does
not disable scanning. Double Read Timeout2 prevents undesired multiple reads while in
this mode.
Trigger Pulse Multiple — When the trigger is pulled and released, scanning is activated until programmable duration1 has elapsed or the trigger has been pulled again to transition to
another state. Double Read Timeout2 prevents undesired multiple reads while in this mode.
Flashing — The reader flashes3 on and off regardless of the trigger status.
Always On — No trigger pull is required to read a bar code. Scanning is continually on.
Double Read Timeout2 prevents undesired multiple reads while in this mode.
Hands-Free Mode — No trigger pull is required to read a bar code. Scanning is turned on
automatically when an item is placed in reader’s field of view. If the trigger is pulled, the
reader acts as if in Trigger Single mode. Double Read Timeout prevents undesired multiple
reads while in this mode.
1. See the Product Reference Guide (PRG) for additional programmable features, such as Scanning Active Time.
2. Double Read Timeout is also programmed using the PRG.
3. Controlled by Flash On Time and Flash Off Time. Use the PRG to program these options.
Quick Reference Guide
9
Scanning Modes
Scanning Modes (continued)
Scan Mode = Trigger Single
Scan Mode = Trigger Hold Multiple
Scan Mode = Trigger Pulse Multiple
Scan Mode = Flashing
Scan Mode = Always On
Scan Mode = Hands-Free Mode
10
Touch TD1100
Troubleshooting
Troubleshooting
Problem
Possible Cause
No power to the reader.
Nothing happens when the trigger
is pulled.
Interface or power cables are
loose.
Possible Solutions
Check system power. Ensure power
supply is connected.
Ensure all cable connections are secure.
Ensure reader is programmed to read
Reader not programmed for cor- the type of bar code scanned. Refer to
rect bar code type.
the Product Reference Guide (PRG) for
more information.
Check the label to ensure it is not
LED comes on, but bar code does
Bar code label is unreadable.
defaced. Try scanning another bar code
not decode.
type.
Distance between reader and
Move reader closer to or further from
bar code is incorrect.
the bar code.
Move scanner away from bar code
Bar code label is too wide
label.
Bar code reading ability has
Clean window using a soft, lint-free
Scan Window has become dirty.
degraded.
cloth dampened with water.
Scan the appropriate host type bar
Bar code is decoded but not trans- Reader not programmed for the
code. Refer to the Product Reference
mitted to the host.
correct host type.
Guide (PRG) for more information.
For detailed troubleshooting, refer to the Product Reference Guide.
NOTE
Quick Reference Guide
11
Technical Features
Technical Features
Item
Description
Physical Characteristics
Color
Dimensions
Weight
Black; Other colors and custom logo options are available for minimum
quantity purchase.
Touch 65: 16.0 x 8.4 x 5.8 cm / 6.3 x 3.3 x 2.3 in
Touch 90: 17.0 x 10.4 x 6.7 cm / 6.7 x 4.1 x 2.7 in
Touch 65: 130.0 g / 4.6 oz
Touch 90: 153.0 g / 5.4 oz
Electrical Characteristics
Current
Operating (Typical): < 100 mA @ 5 VDC
Standby/Idle (Typical): 20 mA @ 5 VDC
Max 180mA @ 5VDC
Input Voltage
5 VDC +/- 0.5 V
Reading Performance
Imager Sensor
Linear Imaging Sensor: Illumination: Red LED 640 nm wavelength
Print Contrast Ratio (Minimum)
25%
Read Angle
Pitch: +/- 65º; Roll (Tilt): +/- 45º; Skew (Yaw): +/- 70º
Reading Indicators
Beeper (Adjustable Tone); Good Read LED
Resolution
(1D Codes, Maximum)
Touch 65 Minimum Resolution = 4 mil (0.102 mm)
Touch 90 Min Resolution = 5 mil (0.127 mm)
Reading Ranges
Typical Depth Of Field
Minimum distance determined by symbol length and scan angle.
Printing resolution, contrast, and ambient light dependent.
Touch 65
Touch 90
Code 39 5 mils:
0 to 5.0 cm (1.97 inches)
0-2.5 cm (0.98 inches)
Code 39 7.5 mils:
0 to 10.0 cm (3.94 inches)
0-8.5 cm (3.35 inches)
Code 39 10 mils:
0 to 15.0 cm (5.91 inches)
0-13.5 cm (5.31 inches)
EAN-13 13 mils:
0 to 20.0 cm (7.87 inches)
0-18.5 cm (7.28 inches)
12
Touch TD1100
Technical Features
Item
Description
Decoding Capability
Humidity
Autodiscriminates all standard 1D codes including GS1 DataBar™ linear
codes.
GS1 DataBar Expanded Stacked; GS1 DataBar Stacked; GS1 DataBar
Stacked Omnidirectional
5 - 95%
Drop specifications
Withstands repeated drops from 1.5 m / 5.0 ft onto a concrete surface
Ambient Light immunity
0 - 20,000 lux
Particulate and Water Sealing
IP30
ESD Level
16 kV
1D / Linear Codes
Stacked Codes
Regulatory
LED Emission Class
Electrical Safety
EMI/RFI
Quick Reference Guide
(IEC-62471:2006-07) Exempt Risk Group (RG 0)
IEC 60950-1 , CAN/CSA C22.2 No. 60950-1-07; UL 60950-1
North America (FCC) : Part 15 Class B, Canada ( IC) : ICES-003 Class B,
European Union EMC Directive, Australian (C-tick), Russia (Gost); Korean
KCC; Japan (VCCI)
13
LED and Beeper Indications
LED and Beeper Indications
The reader’s beeper sounds and its LED illuminates to indicate various functions or errors on the
reader. A “Green Spot” also lights to indicate a good read. The tables below list these indications.
One exception to the behaviors listed in the tables is that the reader’s functions are programmable,
and may or may not be turned on. For example, certain indications, such as the power-up beep
can be disabled using programming bar code labels. Reference the PRG for a more detailed list.
Indication
Power-up
Good Read
ROM Failure
Limited Scanning Label
Read
Reader Disabled
LED
Beeper
LED flashes/blinks on power-up, howReader beeps four times at highest
ever, this may be too rapid to view. With a
frequency and volume upon powerUSB interface, the LED blinks until enuup.
meration with the host is completed.
One beep at current frequency, volLED behavior for this indication is configume, mono/bi-tonal setting and duraurable using the PRG.
tion upon a successful label scan.
Reader sounds one error beep at high200ms on / 200ms off
est volume for 200 mS.
Reader 'chirps' six times at the highest
N/A
frequency and current volume.
The LED blinks continuously 100mS on /
N/A
900 mS off
Ergonomic Recommendations
CAUTION
•
•
•
•
•
•
•
•
•
•
•
14
In order to avoid or minimize the potential risk of ergonomic
injury follow the recommendations below. Consult with your
local Health & Safety Manager to ensure that you are adhering
to your company’s safety programs to prevent employee injury.
Reduce or eliminate repetitive motion
Maintain a natural position
Reduce or eliminate excessive force
Keep objects that are used frequently within easy reach
Perform tasks at correct heights
Reduce or eliminate vibration
Reduce or eliminate direct pressure
Provide adjustable workstations
Provide adequate clearance
Provide a suitable working environment
Improve work procedures.
Touch TD1100
Regulatory Information
Regulatory Information
All models are designed to be compliant with rules and regulations in locations they are sold
and will be labeled as required.
Any changes or modifications to equipment, not expressly approved by Datalogic could
void the user's authority to operate the equipment.
Power Supply
Use only a power supply approved by Datalogic for this product and model. Models require
either a Listed class II or class III with a Limited Power Source(LPS) which supplies power
directly to the reader. For the safety certification to be valid, class III input power sources
must be IEC/EN60950-1 (EN 60335-series, EN 60065 or relevant) approved.
Input: 100 - 240 VAC
Output: 5 VDC
Max Current: 0.35 Amps
Power Out: 12.5 Watts
For USB Power Off Terminal applications, attach to USB 1.0, 1.1, 2.0
or 3.0 host device only.
NOTE
Argentina Power Statement
Características de la fuente de alimentación eléctrica.
Atencíon
Entrada:
100 - 240 Vca
min .35A 50-60 Hz
Salida:
+5VDC, máx 2.5A
(+)Positivo al centro
Utilice en su red solo fuentes certificadas en Argentina.
El uso de fuentes de alimentación no compatibles puede resultar en riesgo de incendio o de choque
eléctrico para el usuario.
Quick Reference Guide
15
Regulatory Information
Radio Frequency Interference Requirements
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. However there is no guarantee that interference will not occur in a particular
installation. If the equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Tested to comply
with FCC Standards
FOR HOME OR OFFICE USE
•
•
•
•
Re-orient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION
The user is cautioned that changes or modifications not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Radio Frequency Interference Requirements - Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Reader Labeling
The label is shown here to illustrate its location only. Please view the labels on your product for
actual details.
16
Touch TD1100
Quick Reference Guide
X
‫ݹ‬ᆖ㓴Ԧ
⭥Ⓚ
Assembly, Module
Power Supply
O
O
O
O
O
O
擱
Hexavalent
Chromium
(Cr(VI))
O
O
O
O
භ௴撔
O
O
O
O
ከ㹜俼劗
O
O
O
O
ከ㹜Ḵ劗慂
Polybrominated
diphenyl ethers
(PBDE)
China RoHS
Polybrominated
biphenyls
(PBB)
᭷ẘ᭷ᐖ≀峐ᡈඖ⣲
Cadmium
(Cd)
EFUP determined by “Look-up Method” (scanner).ġġ䍗ᾅἧ䓐㛇旸⍾⅛Ḷ“㞍堐㱽”㸦㈓㍷Ẓ炸
O௦⾲Ṉ䥵㒊௳ⓗᡤ᭷ᆒ峐㛸㕁ᷕ㇨⏓䘬宍䥵㚱㭺㚱⭛䈑峐⛯ỶḶᷕ⋶Ṣ㮹ℙ␴⚥ᾉ〗ṏ᷂悐ᡤ栩ⶫⓗ
ࠓ䓝⫸ᾉ〗ṏ⑩ᷕ㚱㭺㚱⭛䈑峐䘬旸慷天㯪˫(SJ/T 11363-2006) 奬⭂䘬旸慷ࠋ
X:
௦⾲Ṉ䥵㒊௳ᡤ⏝ⓗᆒ峐㛸㕁ᷕ, ⮳ᑡ᭷୍䰣ᮦᩱ඼ᡤྵⓗ᭷ẘ᭷ᐖ≀峐檀Ḷᷕ⋶Ṣ㮹ℙ␴⚥ᾉ〗ṏ᷂悐ᡤ栩ⶫⓗ
ࠓ䓝⫸ᾉ〗ṏ⑩ᷕ㚱㭺㚱⭛䈑峐䘬旸慷天㯪˫(SJ/T 11363-2006) 奬⭂䘬旸㔞
X
⭥䐟ᶯ㓴
Printed Circuit Board Assy
O
O
ợ
摭
X
X
㒊௳ྡ⛠
⭥ 㔶
Cable
PART
Mercury
(Hg)
Lead
(Pb)
Regulatory Information
China RoHS Table of Restricted Elements
17
Regulatory Information
WEEE Statement
Waste Electrical and Electronic Equipment (WEEE) Statement
English
For information about the disposal of Waste Electrical and Electronic Equipment
(WEEE), please refer to the website at www.datalogic.com.
Italian
Per informazioni sullo smaltimento delle apparecchiature elettriche ed elettroniche
consultare il sito Web www.datalogic.com.
French
Pour toute information relative à l’élimination des déchets électroniques (WEEE),
veuillez consulter le site internet www.datalogic.com.
German
Informationen zur Entsorgung von Elektro- und Elektronik- Altgeräten (WEEE) erhalten
Sie auf der Webseite www.datalogic.com.
Spanish
Si desea información acerca de los procedimientos para el desecho de los residuos del
equipo eléctrico y electrónico (WEEE), visite la página Web www.datalogic.com.
Portuguese
Para informações sobre a disposição de Sucatagem de Equipamentos Elétricos e
Eletrônicos (WEEE -Waste Electrical and Electronic Equipment), consultar o site web
www.datalogic.com.
Chinese
有关处理废弃电气电子设备 (WEEE) 的信息, 请参考 Datalogic 公司的网站
www.datalogic.com。
Japanese
廃電気電子機器 (WEEE) の処理についての関連事項は Datalogic のサイト
www.datalogic.com をご参照下さい。
18
Touch TD1100
Regulatory Information
Datalogic ADC Limited Factory Warranty
Warranty Coverage
Datalogic warrants to Customer that Datalogic's products will be free from defects in materials and workmanship for a period of 5 years from product shipment.
This warranty does not extend to batteries and cables. As consumable items batteries and
cables carry a 90 day warranty from time of purchase for DOA (dead on arrival) defects. In
order to obtain service under this Warranty, Customer must notify Datalogic of the claimed
defect before the expiration of the Warranty period and obtain from Datalogic a return authorization number for return of the product to designated Datalogic service center. If Datalogic determines Customer’s claim is valid, Datalogic will repair or replace product
without additional charge for parts and labor. Customer shall be responsible for packaging
and shipping the product to the designated Datalogic service center, with shipping charges
prepaid. Datalogic shall pay for the return of the product to Customer if the shipment is to
a location within the country in which the Datalogic service center is located. Customer
shall be responsible for paying all shipping charges, duties,taxes, and any other charges for
products returned to any other locations.
Datalogic ADC (“Datalogic”) hardware products are warranted against defects in material
and workmanship under normal and proper use. The liability of Datalogic under this warranty is limited to furnishing the labor and parts necessary to remedy any defect covered by
this warranty and restore the product to its normal operating condition. Repair or replacement of product during the warranty does not extend the original warranty term. Products
are sold on the basis of specifications applicable at the time of manufacture and Datalogic
has no obligation to modify or update products once sold.
If Datalogic determines that a product has defects in material or workmanship, Datalogic
shall, at its sole option repair or replace the product without additional charge for parts and
labor, or credit or refund the defective products duly returned to Datalogic. To perform repairs, Datalogic may use new or reconditioned parts, components, subassemblies or products that have been tested as meeting applicable specifications for equivalent new material
and products. Customer will allow Datalogic to scrap all parts removed from the repaired
product. The warranty period shall extend from the date of shipment from Datalogic for
the duration published by Datalogic for the product at the time of purchase (Warranty period). Datalogic warrants repaired hardware devices against defects in workmanship and
materials on the repaired assembly for a 90 day period starting from the date of shipment
of the repaired product from Datalogic or until the expiration of the original warranty period, whichever is longer. Datalogic does not guarantee, and it is not responsible for, the
maintenance of, damage to, or loss of configurations, data, and applications on the repaired
units and at its sole discretion can return the units in the “factory default” configuration or
with any software or firmware update available at the time of the repair (other than the firmware or software installed during the manufacture of the product). Customer accepts responsibility to maintain a back up copy of its software and data.
Warranty Claims Process
In order to obtain service under the Factory Warranty, Customer must notify Datalogic of
the claimed defect before the expiration of the applicable Warranty period and obtain from
Datalogic a return authorization number (RMA) for return of the product to a designated
Datalogic service center. If Datalogic determines Customer’s claim is valid, Datalogic will
repair or replace product without additional charge for parts and labor. Customer shall be
Quick Reference Guide
19
Regulatory Information
responsible for packaging and shipping the product to the designated Datalogic service center,
with shipping charges prepaid. Datalogic shall pay for the return of the product to Customer if
the shipment is to a location within the country in which the Datalogic service center is located.
Customer shall be responsible for paying all shipping charges, duties, taxes, and any other charges
for products returned to any other locations. Failure to follow the applicable RMA policy, may
result in a processing fee. Customer shall be responsible for return shipment expenses for products
which Datalogic, at its sole discretion, determines are not defective or eligible for warranty repair.
Warranty Exclusions
The Datalogic Factory Warranty shall not apply to:
(i)
any product which has been damaged, modified, altered, repaired or upgraded by other
than Datalogic service personnel or its authorized representatives;
(ii) any claimed defect, failure or damage which Datalogic determines was caused by faulty
operations, improper use, abuse, misuse, wear and tear, negligence, improper storage or
use of parts or accessories not approved or supplied by Datalogic;
(iii) any claimed defect or damage caused by the use of product with any other instrument,
equipment or apparatus;
(iv) any claimed defect or damage caused by the failure to provide proper maintenance,
including but not limited to cleaning the upper window in accordance with product
manual;
(v) any defect or damage caused by natural or man-made disaster such as but not limited to
fire, water damage, floods, other natural disasters, vandalism or abusive events that would
cause internal and external component damage or destruction of the whole unit, consumable items;
(vi) any damage or malfunctioning caused by non-restoring action as for example firmware or
software upgrades, software or hardware reconfigurations etc.;
(vii) the replacement of upper window/cartridge due to scratching, stains or other degradation
and/or
(viii) any consumable or equivalent (e.g., cables, power supply, batteries, keypads, touch screen,
triggers etc.).
No Assignment
Customer may not assign or otherwise transfer its rights or obligations under this warranty except
to a purchaser or transferee of product. No attempted assignment or transfer in violation of this
provision shall be valid or binding upon Datalogic.
DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. DATALOGIC SHALL NOT BE LIABLE FOR ANY DAMAGES SUSTAINED BY
CUSTOMER ARISING FROM DELAYS IN THE REPLACEMENT OR REPAIR OF
PRODUCTS UNDER THE ABOVE. THE REMEDY SET FORTH IN THIS WARRANTY
STATEMENT IS THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY FOR WARRANTY CLAIMS. UNDER NO CIRCUMSTANCES WILL DATALOGIC BE LIABLE TO
CUSTOMER OR ANY THIRD PARTY FOR ANY LOST PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL IN-DIRECT, SPECIAL OR CONTINGENT DAMAGES REGARDLESS OF WHETHER DATALOGIC HAD ADVANCE NOTICE OF THE
POSSIBILITY OF SUCH DAMAGES.
20
Touch TD1100
Services and Support
Risk of Loss
Customer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic
shall assume risk of loss or damage for product in Datalogic’s possession. In the absence of
specific written instructions for the return of product to Customer, Datalogic will select the
carrier, but Datalogic shall not thereby assume any liability in connection with the return
shipment.
Services and Support
Datalogic provides several services as well as technical support through its website. Log on
to www.datalogic.com and click on the links indicated for further information.
Products
Search through the links to arrive at your product page where you can download specific
Manuals and Software & Utilities, including:
•
Datalogic Aladdin™, a multi-platform utility program that allows for both RS-232
and USBCOM communications interfacing. The GUI-based application provides
an easy mechanism for setting scanner configuration, as well as configuration bar
code printing.
Service & Support
•
•
•
•
Technical Support - Product documentation and programming guides and Techni-
cal Support Department in the world
Service Programs - Warranty Extensions and Maintenance Agreements
Repair Services - Flat Rate Repairs and Return Material Authorization (RMA)
Repairs
Downloads – Manuals & Documentation, Data Sheets, Product Catalogues, etc.
Contact Us
•
Information Request Form and Sales & Service Network
Quick Reference Guide
21
Services and Support
NOTES
22
Touch TD1100
DECLARATION OF CONFORMITY
Datalogic ADC, Inc.
959 Terry St.
Eugene, OR 97402 USA
13
EC-79
Rev.: 1
Pag.: 1 di 1
La presente dichiarazione di conformità è rilasciata sotto la responsabilità esclusiva di Datalogic ADC Srl per:
This Declaration of Conformity is issued under the sole responsibility of Datalogic ADC Srl for:
Cette déclaration de conformité est établie sous la seule responsabilité de Datalogic Srl pour:
Diese Konformitätserklärung wird unter der alleinigen Verantwortung des Datalogic ADC Srl erteilt für:
Esta declaración de conformidad se expide bajo la exclusiva responsabilidad de Datalogic ADC Srl para:
Touch, Model TD1100, Bar Code Reader
e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos
sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below:
sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:
den nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:
2004/108/EC - EMC Directive
2011/65/EU - RoHS Directive (8 June 2011)
Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla sicurezza dei prodotti.
On the approximation of the laws of Member States relating to electromagnetic compatibility and product safety.
Basée sur la législation des Etates membres relative à la compatibilté électromagnétique et à la sécurité des produits.
Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit und
Produktsicherheit entsprechen.
Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad electromagnética y las
Medidas de seguridad relativas al producto.
Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:
EN 55022 (CLASS B ITE), DECEMBER 2010
LIMITS AND METHODS OF MEASUREMENTS OF RADIO DISTURBANCE
CHARACTERISTICS OF INFORMATION TECHNOLOGY EQUIPMENT
EN 55024:2010
INFORMATION TECHNOLOGY EQUIPMENT - IMMUNITY CHARACTERISTICS LIMITS AND
METHODS OF MEASUREMENT
EN 60950-1, APRIL 2006
+11:2009+A1:2010+A12:2011
INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1 : GENERAL REQUIREMENTS
EN 50581, SEPTEMBER 2012 :
TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC
PRODUCTS WITH RESPECT TO THE RESTRICTION OF HAZARDOUS SUBSTANCES
Eugene, Oregon USA, April, 2013
Brad West
Vice President - Global Supply Chain Operations
www.datalogic.com
©2012-2014 Datalogic, Inc. • All rights reserved.
Datalogic and the Datalogic logo are registered trademarks
of Datalogic S.p.A. in many countries, including the U.S.A.
and the E.U.
Datalogic ADC, Inc.
959 Terry Street | Eugene |OR 97402 | USA
Telephone: (1) 541-683-5700 | Fax: (1) 541-345-7140
820049914
(Rev C)
September 2014
Download PDF