Alpine | CDE-110UB | Owner`s manual | Alpine CDE-110UB Owner`s manual

R
EN
MP3/WMA/AAC CD Receiver
CDE-102
FR
ES
• OWNER’S MANUAL
Please read before using this equipment.
• MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ALPINE ELECTRONICS MARKETING, INC.
1-1-8 Nishi Gotanda,
Shinagawa-ku,
Tokyo 141-0031, Japan
Phone 03-5496-8231
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF CANADA, INC.
777 Supertest Road, Toronto,
Ontario M3J 2M9, Canada
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
ALPINE ITALIA S.p.A.
Viale C. Colombo 8, 20090 Trezzano
Sul Naviglio (MI), Italy
Phone 02-484781
ALPINE ELECTRONICS GmbH
Frankfurter Ring 117, 80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
Phone 0870-33 33 763
ALPINE ELECTRONICS (BENELUX) GmbH
Leuvensesteenweg 510-B6,
1930 Zaventem, Belgium
Phone 02-725-13 15
ALPINE ELECTRONICS FRANCE S.A.R.L.
(RCS PONTOISE B 338 101 280)
98, Rue de la Belle Etoile, Z.I. Paris Nord Il,
B.P. 50016, 95945 Roissy Charles de Gaulle
Cedex, France
Phone 01-48638989
Designed by ALPINE Japan
68-09359Z73-A
ENGLISH
Contents
Operating Instructions
Sound Setting
Adjusting Subwoofer Level/Bass Level/Treble
Level/Balance (Between Left and Right)/Fader
(Between Front and Rear)/Defeat ............... 12
Setting the Bass Control ................................. 12
WARNING
Setting the Treble Control ............................... 13
WARNING ................................................. 3
Adjusting the High Pass Filter ........................ 13
CAUTION .................................................. 3
Turning Loudness On/Off ............................... 13
PRECAUTIONS ........................................ 3
CAUTION .................................................. 5
Getting Started
Accessory List .................................................. 6
Turning Power On and Off ............................... 6
Detaching and Attaching the Front Panel ........ 6
Initial System Start-Up ..................................... 6
Adjusting Volume ............................................. 6
Lowering Volume Quickly ............................... 6
Setting Time ..................................................... 7
Radio
Listening to Radio ............................................ 7
Presetting Stations Manually ............................ 7
Presetting Stations Automatically .................... 8
Tuning to Preset Stations .................................. 8
CD/MP3/WMA/AAC
Playback ........................................................... 8
Repeat Play ....................................................... 9
M.I.X. (Random Play) ...................................... 9
Searching for CD Text .................................... 10
File/Folder Name Search
(concerning MP3/WMA/AAC) .................. 10
Other Functions
Displaying the Text ......................................... 14
Displaying Time ............................................. 14
Using the Front AUX Input Terminal ............. 15
SETUP
Bluetooth Setting
Setting the Bluetooth Connection (BT IN) ......16
Sound Customizing
Subwoofer On and Off .....................................16
Setting the Subwoofer System .........................16
Visual Customizing
Dimmer Control ...............................................16
Scroll Type Setting ...........................................16
Scroll Setting (TEXT SCR) ..............................16
Demonstration ..................................................16
MP3/WMA/AAC
Playing MP3/WMA/AAC Data
(PLAY MODE) .............................................16
External Device
Turning Mute Mode On/Off (INT MUTE) ......16
Connecting to an External Amplifier
(POWER IC) .................................................16
Setting the AUX+ SETUP Mode .....................17
Setting the AUX NAME mode .........................17
Quick Search .................................................. 10
About MP3/WMA/AAC ................................ 10
1-EN
USB memory (Optional)
Controlling USB memory (Optional) ............. 17
Playing MP3/WMA/AAC Files with the USB
memory (Optional) ...................................... 17
USB Memory Connection (Optional) ............. 18
About MP3/WMA/AAC File of USB
Memory ....................................................... 18
iPhone/iPod (Optional)
Playback .......................................................... 19
Searching for a desired Song .......................... 19
Quick Search ................................................... 19
Direct Search Function ................................... 20
Select Playlist/Artist/Album/Genre/
Composer .................................................... 20
Random Play Shuffle (M.I.X.) ....................... 20
Repeat Play ..................................................... 21
Displaying the Text ......................................... 21
Information
In Case of Difficulty ....................................... 22
Specifications .................................................. 24
Installation and Connections
Warning .................................................. 25
Caution ................................................... 25
Precautions ............................................ 25
Installation ...................................................... 26
Connections .................................................... 27
LIMITED WARRANTY
2-EN
Operating Instructions
WARNING
DO NOT PLACE HANDS, FINGERS OR FOREIGN OBJECTS IN
INSERTION SLOTS OR GAPS.
Doing so may result in personal injury or damage to the product.
WARNING
This symbol means important instructions.
Failure to heed them can result in serious injury
or death.
DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR
ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE.
Any function that requires your prolonged attention should only be
performed after coming to a complete stop. Always stop the vehicle
in a safe location before performing these functions. Failure to do
so may result in an accident.
KEEP THE VOLUME AT A LEVEL WHERE YOU CAN STILL
HEAR OUTSIDE NOISES WHILE DRIVING.
Excessive volume levels that obscure sounds such as emergency
vehicle sirens or road warning signals (train crossings, etc.) can be
dangerous and may result in an accident. LISTENING AT LOUD
VOLUME LEVELS IN A CAR MAY ALSO CAUSE HEARING
DAMAGE.
CAUTION
This symbol means important instructions.
Failure to heed them can result in injury or
material property damage.
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.
Failure to do so may cause personal injury or damage to the
product. Return it to your authorized Alpine dealer or the nearest
Alpine Service Center for repairing.
PRECAUTIONS
Product Cleaning
Use a soft dry cloth for periodic cleaning of the product. For more
severe stains, please dampen the cloth with water only. Anything
else has the chance of dissolving the paint or damaging the plastic.
Temperature
MINIMIZE DISPLAY VIEWING WHILE DRIVING.
Be sure the temperature inside the vehicle is between +60°C
(+140°F) and –10°C (+14°F) before turning your unit on.
Viewing the display may distract the driver from looking ahead of
the vehicle and cause an accident.
Moisture Condensation
Doing so may result in an accident, fire or electric shock.
You may notice the CD playback sound wavering due to
condensation. If this happens, remove the disc from the player and
wait about an hour for the moisture to evaporate.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
Damaged Disc
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
Do not attempt to play cracked, warped, or damaged discs. Playing
a bad disc could severely damage the playback mechanism.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Maintenance
DO NOT DISASSEMBLE OR ALTER.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
If you have problems, do not attempt to repair the unit yourself.
Return it to your Alpine dealer or the nearest Alpine Service
Station for servicing.
USE THE CORRECT AMPERE RATING WHEN REPLACING
FUSES.
Failure to do so may result in fire or electric shock.
DO NOT BLOCK VENTS OR RADIATOR PANELS.
Doing so may cause heat to build up inside and may result in fire.
USE THIS PRODUCT FOR MOBILE 12V APPLICATIONS.
Use for other than its designed application may result in fire,
electric shock or other injury.
3-EN
Never Attempt the Following
Installation Location
Do not grip or pull out the disc while it is being pulled back into the
player by the automatic reloading mechanism.
Do not attempt to insert a disc into the unit when the unit power is
off.
Make sure this unit will not be installed in a location subjected to:
•
•
•
•
Direct sun and heat
High humidity and water
Excessive dust
Excessive vibrations
Correct Handling
Do not drop the disc while handling. Hold the disc so you will not
leave fingerprints on the surface. Do not affix tape, paper, or
gummed labels to the disc. Do not write on the disc.
CORRECT
Inserting Discs
Your player accepts only one disc at a time for playback. Do not
attempt to load more than one disc.
Make sure the label side is facing up when you insert the disc.
“ERROR” will be displayed on your player if you insert a disc
incorrectly. If “ERROR” continues to be displayed even though the
disc has been inserted correctly, push the RESET switch with a
pointed object such as a ballpoint pen.
Playing a disc while driving on a very bumpy road may result in
skips, but this will not scratch the disc or damage the player.
To prevent the CD from jamming, “ERROR” is displayed if discs
with irregular surfaces are inserted or if discs are inserted
incorrectly. When a new disc is ejected immediately after initial
loading, use your finger to feel around the inside of the center hole
and outside edge of the disc. If you feel any small bumps or
irregularities, this could inhibit proper loading of the disc. To
remove the bumps, rub the inside edge of the hole and outside edge
of the disc with a ballpoint pen or other such instrument, then insert
the disc again.
Bumps
Fingerprints, dust, or soil on the surface of the disc could cause the
CD player to skip. For routine cleaning, wipe the playing surface
with a clean, soft cloth from the center of the disc to the outer edge.
If the surface is heavily soiled, dampen a clean, soft cloth in a
solution of mild neutral detergent before cleaning the disc.
Center Hole
New Disc
Outside
(Bumps)
Irregular Shaped Discs
Be sure to use round shape discs only for this unit and never use
any special shape discs.
Use of special shape discs may cause damage to the mechanism.
Disc Accessories
There are various accessories available on the market for protecting
the disc surface and improving sound quality. However, most of
them will influence the thickness and/or diameter of the disc. Using
such accessories can cause the disc to be out of standard
specifications and may create operational problems. We
recommend not using these accessories on discs played in Alpine
CD players.
Transparent Sheet
4-EN
CORRECT
Disc Cleaning
New Discs
Center Hole
INCORRECT
Disc Stabilizer
On handling Compact Discs (CD/CD-R/CD-RW)
•
•
•
•
•
•
Do not touch the surface.
Do not expose the disc to direct sunlight.
Do not affix stickers or labels.
Clean the disc when it is dusty.
Make sure that there are no bumps around the disc.
Do not use commercially available disc accessories.
Do not leave the disc in the car or the unit for a long time. Never
expose the disc to direct sunlight. Heat and humidity may damage
the CD and you may not be able to play it again.
To customers using CD-R/CD-RW
• If a CD-R/CD-RW cannot be played back, make sure the last
recording session was closed (finalized).
• Finalize the CD-R/CD-RW if necessary, and attempt playback
again.
About media that can be played
Use only compact discs with the label side showing the CD logo
marks below.
If you use unspecified compact discs, correct performance cannot
be guaranteed.
You can play CD-Rs (CD-Recordables)/CD-RWs (CDReWritables) which have been recorded only on audio devices.
You can also play CD-Rs/CD-RWs containing MP3/WMA/AAC
formatted audio files.
• Some of the following CDs may not play on this unit:
Flawed CDs, CDs with fingerprints, CDs exposed to extreme
temperatures or sunlight (e.g., left in the car or this unit), CDs
recorded under unstable conditions, CDs on which a recording
failed or a re-recording was attempted, copy-protected CDs
which do not conform to the audio CD industry standard.
• Use discs with MP3/WMA/AAC files written in a format
compatible with this unit. For details, see pages 10-11.
• ROM data other than audio files contained in a disc will not
produce sound when played back.
Protecting the USB connection terminal
• Only USB flash memory devices can be connected to the USB
connection terminal on this unit. Correct performance using
other USB products cannot be guaranteed. A USB hub is not
supported.
• Do not connect a USB memory over 20 mm wide. Also, avoid
connecting USB memory and Front Aux at the same time.
• If a USB device is inserted in the unit, it projects out and may be
a danger while driving. Use a commercially available USB
extension cable, and connect it in a safe way.
• Depending on the connected USB memory device, the unit may
not function or some functions may not be performed.
• The audio file format that can be played back on the unit is
MP3/WMA/AAC.
• Artist/song name, etc., can be displayed, however characters
may not be correctly displayed.
CAUTION
Alpine accepts no responsibility for lost data, etc., even if data, etc.
is lost while using this product.
On Handling USB Memory
• To prevent malfunction or damage, note the following points.
Read the USB memory Owner’s Manual thoroughly.
Do not touch the terminals by hand or metal.
Do not subject USB memory to excessive shock.
Do not bend, drop, disassemble, modify or soak in the water.
• Avoid usage or storage in the following locations:
Anywhere in the car exposed to direct sunlight or high
temperatures.
Anywhere the possibility of high humidity or corrosive
substances are present.
• Fix the USB memory in a location where driver operation will
not be hindered.
• USB memory may not function correctly at high or low temperature.
• The USB flash memory supports only 512 or 2,048 bytes per sector.
• Use only certified USB memory. Note that even certified USB
memory, may not function correctly depending on its type or state.
• USB memory function is not guaranteed. Use USB memory
according to the terms of agreement.
• Depending on the settings of the USB memory type, memory state or
encoding software, the unit may not play back or display properly.
• A file that is copy-protected (copyright protection) cannot be
played back.
• USB memory may take time to start playback. If there is a
particular file other than audio in the USB memory, it may take
considerable time before the file is played back or searched.
• The unit can play back “mp3”, “wma” or “m4a” file extensions.
• Do not add the above extensions to a file other than audio data.
This non-audio data will not be recognized. The resulting playback
may contain noise that can damage speakers and/or amplifiers.
• It is recommended to back up important data on a personal
computer.
• Do not remove the USB device while playback is in progress.
Change SOURCE to something other than USB, then remove the
USB device to prevent possible damage to its memory.
• Windows Media and the Windows logo are trademarks, or
registered trademarks of Microsoft Corporation in the United
States and/or other countries.
• iPod and iTunes are trademarks of Apple Inc, registered in the
U.S. and other countries.
• iPhone is a trademark of Apple Inc.
• “Made for iPod” means that an electronic accessory has been
designed to connect specifically to iPod and has been certified by
the developer to meet Apple performance standards.
• “Works with iPhone” means that an electronic accessory has
been designed to connect specifically to iPhone and has been
certified by the developer to meet Apple performance standards.
• Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
• The Bluetooth word mark and logos are owned by the Bluetooth
SIG, Inc. and any use of such marks by Alpine Electronics, Inc. is
under license. Other trademarks and trade names are those of
their respective owners.
• “MPEG Layer-3 audio coding technology licensed from
Fraunhofer IIS and Thomson.”
• “Supply of this product only conveys a license for private,
non-commercial use and does not convey a license nor imply
any right to use this product in any commercial (i.e. revenuegeneration) real time broadcasting (terrestrial, satellite, cable
and/or any other media), broadcasting/streaming via internet,
intranets and/or other networks or in other electronic content
distribution systems, such as pay-audio or audio-on-demand
applications. An independent license for such use is required.
For details, please visit http://www. mp3licensing.com”
5-EN
Attaching
Getting Started
1
2
Rotary encoder
/
• Before attaching the front panel, make sure that there is no dirt or
dust on the connector terminals and no foreign object between the
front panel and the main unit.
• Attach the front panel carefully, holding the sides of the front panel to
avoid pushing buttons by mistake.
/ENT
Accessory List
•
•
•
•
•
•
•
Initial System Start-Up
Head unit ............................................................................1
Power cable ........................................................................1
Mounting sleeve.................................................................1
Carrying case .....................................................................1
Bracket key.........................................................................2
Screw (M5 × 8)....................................................................4
Owner’s Manual .......................................................... 1 set
Turning Power On and Off
Press SOURCE/
Push the left side of the front panel until it locks
firmly into the main unit.
SOUND/SETUP
SOURCE/
(Release)
/MUTE
Insert the right side of the front panel into the main
unit. Align the groove on the front panel with the
projections on the main unit.
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
1
2
3
Turn off the unit power.
Remove the detachable front panel.
Press RESET with a ballpoint pen or similar pointed
object.
to turn on the unit.
• The unit can be turned on by pressing any other button except
(Release).
Press and hold SOURCE/
turn off the unit.
and
for at least 2 seconds to
RESET switch
• The first time power is turned on, the volume will start from level 12.
Detaching and Attaching the Front Panel
Adjusting Volume
Detaching
Turn the Rotary encoder until the desired sound is
obtained.
1
2
3
Turn off the unit power.
Press
(Release) at the lower left side until the
front panel pops out.
Grasp the left side of the front panel and pull it out.
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
Press
/MUTE to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing
/MUTE again will bring the audio back to its
previous level.
• The front panel may become hot in normal usage (especially the
connector terminals on the back of the front panel). This is not a
malfunction.
• To protect the front panel, place it in the supplied carrying case.
• When detaching the front panel, do not apply excessive force as it
may result in malfunction.
6-EN
Setting Time
1
2
Radio
Press and hold SOUND/SETUP for at least
2 seconds to activate the SETUP mode.
Turn the Rotary encoder to select the CLOCK ADJ
mode, and then press / /ENT.
SOURCE/
BAND
The time indication will blink.
3
4
5
6
Turn the Rotary encoder to adjust the hours while
the time indication is blinking.
When the hour has been adjusted, press
/
/ENT.
TUNE/A.ME
Turn the Rotary encoder to adjust the minutes
while the time indication is blinking.
Press and hold SOUND/SETUP for at least 2
seconds to return to normal mode.
• To synchronize the clock to another clock/watch or radio time
announcement, press and hold / /ENT for at least 2 seconds
after setting the “hour.” Minutes will reset to “00”. If the display
shows over “30” minutes when you do this, the time will advance one
hour.
• Pressing
/MUTE will return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
Preset buttons
(1 through 6)
Listening to Radio
1
2
Press SOURCE/
Press BAND repeatedly until the desired radio band
is displayed.
F1 (FM1)
3
to select TUNER mode.
F2 (FM2)
AM
F1 (FM1)
Press TUNE/A.ME to select the tuning mode.
DX SEEK (Distance mode)
SEEK (Local mode)
OFF (Manual mode)
DX SEEK
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press
Holding down
continuously.
or
to tune in the desired station.
or
will change the frequency
Presetting Stations Manually
1
2
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) into which you wish
to store the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
• A total of 18 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2 and AM).
• If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
7-EN
Presetting Stations Automatically
1
2
Press BAND repeatedly until the desired radio band
is displayed.
CD/MP3/WMA/AAC
SOURCE/
Rotary encoder
Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into preset buttons 1 to 6
in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
/MUTE
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.
Tuning to Preset Stations
1
2
Press BAND repeatedly until the desired band is
displayed.
/
/ESC
2
1
/ENT
4 5
VIEW
Playback
1
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically, and the
” indicator lights up .
“
Press any one of the station preset buttons
(1 through 6) that has your desired radio station in
memory.
The display shows the band, preset number and frequency
of the station selected.
When a disc is already inserted, press SOURCE/
switch to the DISC mode.
to
The mode will change every time the button is pressed.
TUNER
DISC
BT AUDIO*3
USB AUDIO
iPod*1/AUX+*2
AUX*4
TUNER
*1 Displayed only when the iPhone/iPod is connected and AUX+
SETUP is set to OFF, refer to “Setting the AUX+ SETUP Mode”
(page 17).
*2 Displayed only when the AUX+ SETUP is set to ON, refer to “Setting
the AUX+ SETUP Mode” (page 17).
*3 Displayed only when BT IN is set to BT ADAPTER. Refer to
“Bluetooth Setting” (page 16).
*4 Refer to “Using the Front AUX Input Terminal” (page 15).
2
While playing back MP3/WMA/AAC, press 1
2 to select the desired folder.
Pressing and holding 1
continuously.
8-EN
or
2 will change folders
or
3
Press
or
to select the desired track (file).
CD mode :
Returning to the beginning of the current track (file):
Press
.
Fast backward:
Press and hold
.
Advancing to the beginning of the next track (file):
Press
.
Fast forward:
Press and hold
4
5
MP3/WMA/AAC mode :
: Only a file is repeatedly played back.
.
/
To pause playback, press
Pressing
: Only a track is repeatedly played back.
/ENT.
: Only files in a folder are repeatedly played back.
/ENT again will resume playback.
/
To eject the disc, press
.
• Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
• If the CD does not eject, press and hold
for at least 2 seconds.
• The “
” indicator lights up when a disc is inserted.
• Three-inch (8 cm) CDs cannot be used.
• The CD-player can play discs containing audio data, MP3 data,
WMA data and AAC data.
• WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from the
iTunes Store and files that are copy-protected (copyright protection)
cannot be played back on this unit.
• The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
M.I.X. (Random Play)
Press 5
in the play or pause mode.
The tracks (files) on the disc will be played back in random
sequence.
To cancel M.I.X. play, press 5
again.
CD mode :
: The tracks are played back in random sequence.
MP3/WMA/AAC Play Display
The folder number and file number will be displayed as
described below.
F101 T103
MP3/WMA/AAC mode :
: Only files in a folder are played back in
random sequence.
: The files are played back in random sequence.
Folder number
display
File number
display
• Press VIEW to switch the display. See “Displaying the Text”
(page 14) for information about display switching.
Repeat Play
Press
played.
* In the USB mode, all files stored in the USB memory are played back
” indicator lights up.
in random sequence, and the “
4 to play back repeatedly the track being
The track (file) will be played repeatedly.
Press
4 again and select off to deactivate repeat play.
9-EN
Searching for CD Text
Quick Search
On discs utilizing CD Text, songs can be searched and played by using
their recorded titles. For discs without CD Text, searches are made
using the track numbers associated with each song.
You can search for tracks (files).
1
/ESC during play.
Press
This will set the search mode, and the “
up.
2
” indicator lights
Turn the Rotary encoder to select the desired
track, and then press / /ENT.
This will play the selected track.
• Press and hold
/ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is canceled if no operation is performed
for 10 seconds.
• When CD Text Search is made during M.I.X. play, the M.I.X. play
mode will be canceled.
File/Folder Name Search
(concerning MP3/WMA/AAC)
During MP3/WMA/AAC playback, press
activate the search mode.
The “
2
/ESC to
4
Turn the Rotary encoder to select the desired
folder.
Press and hold
/ /ENT for at least 2 seconds to
play back the first file in the selected folder.
File Name Search mode
5
2
” indicator lights up.
Turn the Rotary encoder to select a desired track
(file).
The selected track is played back immediately.
• Press and hold
/ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is canceled if no operation is performed
for 10 seconds.
About MP3/WMA/AAC
Except for private use, duplicating audio data (including
MP3/WMA/AAC data) or distributing, transferring, or copying it,
whether for free or for a fee, without permission of the copyright
holder is strictly prohibited by the Copyright Act and by
international treaty.
What is MP3?
Turn the Rotary encoder to select Folder Name
Search mode or File Name Search mode, and then
press / /ENT.
• Press and hold
/ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is canceled if no operation is performed
for 10 seconds.
• To search for files in the Folder Name Search mode, press
/ /ENT. Files in the folder may be searched.
• Press
/MUTE to exit Folder Name Search mode in step 3 in order
to select File Name Search mode.
• The root folder is displayed as “
”.
• When Folder Name Search is made during M.I.X. play, the M.I.X.
play mode will be canceled.
3
4
The “
” indicator lights up.
Folder Name Search mode
3
Press and hold
/ESC for at least 2 seconds in the
CD/MP3/WMA/AAC mode to activate Quick Search
mode.
CAUTION
Folder and file names may be searched and displayed during playback.
1
1
Press 1
or
2 to select another Folder.
Select the desired file by turning the Rotary
encoder.
Press
/
/ENT to play back the selected file.
• Press and hold
/ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is canceled if no operation is performed
for 10 seconds.
• Press
/MUTE in the search mode to return to the previous mode.
• When File Name Search is made during M.I.X. play, the M.I.X. play
mode will be canceled.
10-EN
MP3, whose official name is “MPEG-1 Audio Layer 3,” is a
compression standard prescribed by the ISO, the International
Standardization Organization and MPEG which is a joint activity
institution of the IEC.
MP3 files contain compressed audio data. MP3 encoding is
capable of compressing audio data at extremely high ratios,
reducing the size of music files to as much as one-tenth their
original size. This is achieved while still maintaining near CD
quality. The MP3 format realizes such high compression ratios
by eliminating the sounds that are either inaudible to the human
ear or masked by other sounds.
What is WMA?
WMA, or “Windows Media™ Audio,” is compressed audio data.
WMA is similar to MP3 audio data and can achieve CD quality
sound with small file sizes.
What is AAC?
AAC is the abbreviation for “Advanced Audio Coding,” and is a
basic format of audio compression used by MPEG2 or MPEG4.
Method for creating MP3/WMA/AAC files
Audio data is compressed using software with MP3/WMA/AAC
codecs. For details on creating MP3/WMA/AAC files, refer to the
user’s manual for that software.
MP3/WMA/AAC files that are playable on this device have the
file extensions “mp3” / “wma” / “m4a”. Files with no extension
cannot be played back (WMA ver. 7.1, 8 and 9 are supported).
Protected files are not supported, neither are raw AAC files
(using the “.aac” extension).
There are many different versions of the AAC format. Confirm
that the software being used conforms to the acceptable
formats listed above. It’s possible that the format may be
unplayable even though the extension is valid.
Playback of AAC files encoded by iTunes is supported.
Supported playback sampling rates and bit rates
Order of files
Files are played back in the order that the writing software writes
them to the disc. Therefore, the playback order may not be what
is expected. Verify the writing order in the software’s
documentation. The playback order of the folders and files is as
follows.
MP3
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
16 kHz, 12 kHz, 11.025 kHz, 8 kHz
Bit rates:
32 - 320 kbps
WMA
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz
Bit rates:
32 - 192 kbps
Root folder
AAC
Sampling rates: 48 kHz, 44.1 kHz, 32 kHz, 24 kHz, 22.05 kHz,
16 kHz, 12 kHz, 11.025 kHz, 8 kHz
Bit rates:
16 - 320 kbps
This device may not play back correctly depending on sampling
rates.
ID3 tags/WMA tags
This device supports ID3 tag v1 and v2, and WMA tag.
If tag data is in an MP3/WMA/AAC file, this device can display
the title (track title), artist name, and album name ID3 tag/WMA
tag data.
This device can only display single-byte alphanumeric
characters (up to 30 for ID3 tags and up to 15 for WMA tags)
and the underscore. For non-supported characters, “NO
SUPPORT” is displayed.
If information contains characters other than ID3 tag information,
the audio file may not be played back.
The tag information may not be correctly displayed, depending
on the contents.
Producing MP3/WMA/AAC discs
MP3/WMA/AAC files are prepared, then written to a CD-R or
CD-RW using CD-R writing software. A disc can hold up to 510
files/folders (including Root Folders), and the maximum number
of folders is 255.
Playback may not be performed if a disc exceeds the limitations
described above.
Media supported
The media that this device can play back are CD-ROMs, CD-Rs,
and CD-RWs.
Corresponding File Systems
This device supports discs formatted with ISO9660 Level 1 or
Level 2.
Under the ISO9660 standard, there are some restrictions to
remember.
The maximum nested folder depth is 8 (including the root
directory). The number of characters for a folder/file name is
limited.
Valid characters for folder/file names are letters A-Z (all caps),
numbers 0-9, and ‘_’ (underscore).
This device also can play back discs in Joliet, Romeo, etc., and
other standards that conform to ISO9660. However, sometimes
the file names, folder names, etc., are not displayed correctly.
Formats supported
Folder
MP3/WMA/AAC File
* The folder No./ folder Name will not be displayed if no file is
contained in the folder.
Terminology
Bit rate
This is the “sound” compression rate specified for encoding. The
higher the bit rate, the higher the sound quality, but also the larger
the files.
Sampling rate
This value shows how many times per second the data is sampled
(recorded). For example, music CDs use a sampling rate of 44.1 kHz,
so the sound is sampled (recorded) 44,100 times per second. The
higher the sampling rate, the higher the sound quality, but also the
larger the volume of data.
Encoding
Converting music CDs, WAVE (AIFF) files, and other sound files into
the specified audio compression format.
Tag
Song information such as track titles, artist names, album names,
etc., written into MP3/WMA/AAC files.
Root folder
The root folder (or root directory) is found at the top of the file
system. The root folder contains all folders and files. It is created
automatically for all burned discs.
This device supports CD-ROM XA, Mixed Mode CD, Enhanced
CD (CD-Extra) and Multi-Session.
This device cannot correctly play back discs recorded with
Track At Once or packet writing.
11-EN
Sound Setting
Rotary encoder (AUDIO/LOUD)
SOURCE/
BAND
Setting the Bass Control
You can change the Bass Frequency emphasis to create your own tonal
preference.
1
Press SOUND/SETUP repeatedly to select the
BASS mode.
BASS
TREBLE
HPF
BASS
Setting the Bass Center Frequency
2-1 Press BAND to select the desired bass center
frequency.
/ESC SOUND/SETUP
80 Hz
100 Hz
200 Hz
60 Hz
80 Hz
Emphasizes the displayed bass frequency ranges.
Adjusting Subwoofer Level/Bass Level/
Treble Level/Balance (Between Left and
Right)/Fader (Between Front and Rear)/
Defeat
1
Setting the Bass Bandwidth
2-2 Press SOURCE/
Press Rotary encoder (AUDIO) repeatedly to
choose the desired mode.
Changes the boosted bass bandwidth to wide or narrow. A
wider setting will boost a wide range of frequencies above
and below the center frequency. A narrower setting will
boost only frequencies near the center frequency.
Each press changes the mode as follows:
SUBWOOFER*
BASS LEVEL
TRE LEVEL
BALANCE
FADER
DEFEAT
VOLUME
SUBWOOFER
Subwoofer : +0 ~ +15
Bass level: –7 ~ +7
Treble level: –7 ~ +7
Balance : L15 ~ R15
Fader : R15 ~ F15
Defeat : ON/OFF
Volume : 0 ~ 35
• If no operation is performed for 5 seconds after selecting the
SUBWOOFER, BASS LEVEL, TRE LEVEL, BALANCE, FADER or
DEFEAT mode, the unit automatically returns to normal mode.
* When the subwoofer mode is set to OFF, its level cannot be adjusted.
2
to select the desired bass
bandwidth.
Turn the Rotary encoder until the desired sound is
obtained in each mode.
By setting DEFEAT ON, previously adjusted settings of
BASS LEVEL and TRE LEVEL will return to the factory
defaults.
12-EN
Setting the Bass Level
2-3* Turn the Rotary encoder to select the desired
1
bass level (–7~+7).
You can emphasize or weaken the bass level.
3
Press and hold
/ESC for at least 2 seconds to
return to normal mode.
• If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
• The bass level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The bass
frequency and bass bandwidth settings adjusted for one source are
effective for all other sources (FM, AM, CD, etc.).
• The function is inoperable when DEFEAT is set to ON.
*1 The adjustment can also be made by pressing Rotary encoder.
Refer to “Adjusting Subwoofer Level/Bass Level/Treble Level/
Balance (Between Left and Right)/Fader (Between Front and Rear)/
Defeat” (page 12).
Setting the Treble Control
Turning Loudness On/Off
You can change the Treble Frequency emphasis to create your own tonal
preference.
Loudness introduces a special low- and high-frequency emphasis at low
listening levels. This compensates for the ear’s decreased sensitivity to
bass and treble sound.
1
Press SOUND/SETUP repeatedly to select the
TREBLE mode.
BASS
TREBLE
HPF
Press and hold Rotary encoder (LOUD) for at least 2
seconds to activate or deactivate the loudness mode.
BASS
• The function is inoperable when DEFEAT is set to ON.
Setting the Treble Center Frequency
2-1 Press BAND to select the desired treble center
frequency.
10.0 kHz
12.5 kHz
15.0 kHz
17.5 kHz
10.0 kHz
Emphasizes the displayed treble frequency ranges.
Setting the Treble Level
2-2* Turn the Rotary encoder to select the desired
2
treble level (–7~+7).
You can emphasize the treble level.
3
Press and hold
/ESC for at least 2 seconds to
return to normal mode.
• If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
• The treble level settings will be individually memorized for each
source (FM, AM, CD, etc.) until the setting is changed. The Treble
frequency settings adjusted for one source are effective for all other
sources (FM, AM, CD, etc.).
• The function is inoperable when DEFEAT is set to ON.
*2 The adjustment can also be made by pressing Rotary encoder.
Refer to “Adjusting Subwoofer Level/Bass Level/Treble Level/
Balance (Between Left and Right)/Fader (Between Front and Rear)/
Defeat” (page 12).
Adjusting the High Pass Filter
The High Pass Filter on this unit can be adjusted to suit your personal
taste.
1
Press SOUND/SETUP repeatedly to select the HPF
mode.
BASS
2
TREBLE
HPF
BASS
Turn the Rotary encoder to select the desired HPF
frequency.
OFF
60 Hz
80 Hz
100 Hz
All frequencies above the selected cutoff are output.
3
Press and hold
/ESC for at least 2 seconds to
return to normal mode.
• If no operation is performed for 15 seconds, the unit will return to
normal mode automatically.
• The function is inoperable when DEFEAT is set to ON.
13-EN
About the indication display
Other Functions
When displaying Text, the following indicators are lit
according to the mode.
SOURCE/
Indicator/
Mode
CD Mode
MP3/WMA/AAC/
USB AUDIO
Mode
iPhone/iPod/
BT AUDIO
Mode
––
Folder Name*2
being displayed
––
––
Artist Name*1
Artist Name*1
being displayed being displayed
VIEW
Displaying the Text
Text information, such as the disc name and the track name, will be
displayed if playing a CD text compatible disc. It is also possible to
display the folder name, the file name and the tag, etc., while playing
MP3/WMA/AAC files.
Press VIEW.
The display will change every time the button is pressed.
• When the TEXT SCR is set to SCR MANU, press and hold VIEW for
at least 2 seconds, the current text will be scrolled one time (except
Radio mode).
The display in Radio mode:
FREQUENCY
CLOCK
FREQUENCY
The display in CD mode:
TRACK NO./ELAPSED TIME
TRACK NO./CLOCK
TEXT (DISC NAME)*1
TEXT (TRACK NAME)*1
TRACK NO./ELAPSED TIME
The display in MP3/WMA/AAC mode:
FILE NO./ELAPSED TIME
FOLDER NO./FILE NO.
FILE NO./CLOCK
FOLDER NAME
FILE NAME
ARTIST NAME*2
ALBUM NAME*2
SONG NAME*2
FILE NO./ELAPSED TIME
The display in AUX mode:
AUX NAME
AUX NAME/CLOCK
AUX NAME
The display in BT AUDIO mode:
The Following display will be shown only when a telephone or
Bluetooth Streaming device with Metadata capabilities is
correctly connected with a Bluetooth INTERFACE (Alpine
KCE-400BT) (sold separately). (For details on Bluetooth
INTERFACE, refer to the Owner’s manual of KCE-400BT).
BT A/ELAPSED TIME
BT A/CLOCK
ARTIST NAME*2
ALBUM NAME*2
SONG NAME*2
BT A/ELAPSED TIME
*1 Displayed during playback of a disc with CD text.
*2 ID3 tag/WMA tag
If an MP3/WMA/AAC file contains ID3 tag/WMA tag information,
the ID3 tag/WMA tag information is displayed (e.g., song name,
artist name, and album name). All other tag data is ignored.
14-EN
Text (Disc
Name*3) being
displayed
Album Name*1 Album Name*1
being displayed being displayed
Text (Track
Name*3) being
displayed
Song Name*1/ Song Name*1
File Name being being displayed
displayed
*1 Tag information
If there is no tag information, “ARTIST”/“ALBUM”/“SONG” is
displayed.
*2 The root folder of disc is displayed as “FOLDER”. The root folder of
USB memory is displayed as “ROOT”.
*3 If there is no Text (Disc Name or Track Name), “DISC TEXT”/
“TRACK TEXT” is displayed.
About “Text”
Text:
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as
“text.”
• Some characters may not be displayed correctly with this device,
depending on the character type.
• “NO SUPPORT” is displayed when the desired text information
cannot be displayed on this unit.
• The text or tag information may not be correctly displayed,
depending on the contents.
Displaying Time
Press VIEW repeatedly until the time is displayed.
Each press changes the display.
For details, see “Displaying the Text” (page 14).
• Selecting any tuner or CD function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
Using the Front AUX Input Terminal
Connect a portable music player, etc. by simply connecting it to the
input on the front panel. An optional adapter cable is required (standard
RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).
SETUP
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, Sound Customizing, Visual
Customizing, etc., can be modified.
Press SOURCE/ , and select the AUX mode to listen to
the portable device.
TUNER
DISC
USB AUDIO
BT AUDIO*3
AUX
TUNER
Rotary encoder (AUDIO)
iPod*1/AUX+*2
*1 Displayed only when the iPhone/iPod is connected and AUX+
SETUP is set to OFF, refer to “Setting the AUX+ SETUP Mode”
(page 17).
2
* Displayed only when the AUX+ SETUP is set to ON, refer to “Setting
the AUX+ SETUP Mode” (page 17).
*3 Displayed only when BT IN is set to BT ADAPTER. Refer to
“Bluetooth Setting” (page 16).
Portable player, etc.
SOUND/SETUP
Main unit
/MUTE
/
/ENT
Use steps 1 to 4 to select one of the SETUP modes to
modify. See the applicable section below for details
about the selected SETUP item.
1
2
Press and hold SOUND/SETUP for at least 2
seconds to activate the SETUP mode.
Turn the Rotary encoder to select the desired
SETUP menu, and then press / /ENT.
(e.g. Select SUBWOOFER)
BT IN*1
CLOCK ADJ*2
PLAY MODE
INT MUTE*3
AUX+ SETUP
AUX+ NAME*4
AUX NAME
POWER IC
DEMO
SUBWOOFER
SUBW SYS*5
DIMMER
SCROLLTYPE
TEXT SCR
BT IN
or
Optional adapter cable (RCA pin
plugs [red, white] 3.5ø miniplugs)
or (3.5ø miniplugs).
• If a USB memory is directly connected to the USB terminal, the size
or shape may interfere with driving operations, therefore, avoid
connecting an AUX input terminal and a USB memory at the same
time.
*1 Displayed only when INT MUTE is set to OFF, and the mode is set to
other than BT AUDIO.
*2 Refer to “Setting Time” (page 7).
3
* Displayed only when BT IN is OFF.
*4 Displayed only when AUX+ SETUP is ON.
*5 Displayed only when SUBWOOFER is ON.
3
Turn the Rotary encoder to change the setting.
(e.g. Select SUBW ON or SUBW OFF.)
4
Press and hold SOUND/SETUP for at least 2
seconds to return to normal mode.
• Press
/MUTE to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
15-EN
Bluetooth Setting
Setting the Bluetooth Connection (BT IN)
BT ADAPTER / BT OFF (Initial setting)
If an optional Bluetooth INTERFACE (KCE-400BT) is connected, you
can place a hands-free call by a Bluetooth-equipped mobile phone.
Make this setting when the Bluetooth INTERFACE (KCE-400BT) is
connected and the Bluetooth function is used. For details, refer to the
Owner’s Manual of the optional Bluetooth INTERFACE (KCE-400BT).
Set ADAPTER when the Bluetooth INTERFACE (KCE-400BT) is
connected.
• The
button can be used only when the optional Bluetooth
INTERFACE (KCE-400BT) is connected.
• If the mobile phone compatible with the Voice Dial function is
connected, the Voice Dial function can be used.
Sound Customizing
Subwoofer On and Off
Scroll Setting (TEXT SCR)
SCR AUTO / SCR MANU (Initial setting)
This CD player can scroll the disc and track names recorded on
CD-TEXT discs, as well as the text information of MP3/WMA/AAC
files, folder names and tags.
SCR AUTO:
SCR MANU:
The CD text information, the text information of
folder and file names, and the tags are
scrolled automatically.
The display is scrolled when a disc is loaded
or when a track is changed, etc.
• The unit scrolls CD text names, folder names, file names or tag
display.
Demonstration
DEMO ON / DEMO OFF (Initial setting)
This unit has a demonstration feature for the display.
• To quit Demo mode, set to DEMO OFF.
MP3/WMA/AAC
SUBW ON (Initial setting) / SUBW OFF
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
1 In the normal mode, press Rotary encoder (AUDIO)
repeatedly to select the SUBWOOFER mode.
SUBWOOFER
BASS LEVEL
TRE LEVEL
BALANCE
FADER
DEFEAT
VOLUME
SUBWOOFER
2 Adjust the level by turning the Rotary encoder.
Setting the Subwoofer System
SUBW SYS 1 (Initial setting) / SUBW SYS 2
Select either SYS 1 or SYS 2 for the desired subwoofer effect.
SUBW SYS 1: Subwoofer level changes according to the main
volume setting.
SUBW SYS 2: Subwoofer level change is different from the main
volume setting. For example, even at low volume
settings, the subwoofer is still audible.
Playing MP3/WMA/AAC Data (PLAY MODE)
CD-DA (Initial setting) / CDDA/MP3
This unit can play back CDs containing both CD and MP3/WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can select playback of a single session only, containing the CD data.
When a disc contains both CD and MP3/WMA/AAC data, playback
starts from the CD data portion of the disc.
CD-DA:
Only the CD data in Session 1 can be played back.
CDDA/MP3: CD data, MP3/WMA/AAC files in mixed mode, and
multi-session discs can be played back.
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first.
External Device
Turning Mute Mode On/Off (INT MUTE)
Visual Customizing
Dimmer Control
DIM AUTO (Initial setting) / DIM MANUAL
MUTE ON / MUTE OFF (Initial setting)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON. This mode
is useful if you feel the unit’s backlighting is too bright at night.
Connecting to an External Amplifier (POWER IC)
Scroll Type Setting
When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
SCR TYPE1 / SCR TYPE2 (Initial setting)
Choose from two scrolling methods.
Select the type you prefer.
SCR TYPE1:
SCR TYPE2:
The characters scroll from right to left, a
single character at a time.
Words are built up from left to right, a single
character at a time. When the display is filled,
it is cleared and the remaining words are
displayed the same way until all words of the
title have been shown.
POW ON (Initial setting) / POW OFF
POW OFF:
Use this mode when the line output of this unit
is used to drive an external amplifier. In this
setting, the head unit’s internal amplifier is
turned OFF and cannot drive speakers.
Amplifier
Front
left
Front
right
Amplifier
Rear
left
Rear
right
16-EN
The speakers are driven by the built-in
amplifier.
POW ON :
USB memory (Optional)
Speakers
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
Front
right
Rear
right
/
SOURCE/
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
Rear
left
Front
left
/ENT
Controlling USB memory (Optional)
A USB memory device may be connected to this unit. With USB
memory connected, playback of files on the device is controlled from
this unit.
• The controls on this unit for USB memory operation are operative
only when a USB memory is connected.
• No sound is produced by the system when the power output is set to
OFF.
Setting the AUX+ SETUP Mode
AUX+ ON / AUX+ OFF (Initial setting)
An external device (such as a portable music player) can be connected
to the Full Speed connector of this unit. A conversion cable
(KCA-237B) for building up the AUX IN (optional) is required.
A portable music device and an iPhone/iPod cannot be connected to the
Full Speed connector at the same time.
AUX+ ON:
Set to ON when a portable device is connected. If
SOURCE/ is pressed and AUX+ is selected, the
sound of the portable device is input to the unit.
AUX+ OFF: Set to OFF when an iPhone/iPod is connected.
You can change the AUX+ name display when AUX+ SETUP is set to
ON. Press
/ /ENT when AUX+ SETUP is set to ON, and select
AUX+ NAME by turning the Rotary encoder, then press
/ /ENT.
After that, turn the Rotary encoder to select the desired AUX+ name.
Setting the AUX NAME mode
AUXILIARY*1(Initial setting) / TV / DVD / PORTABLE*2 / GAME
You can change the AUX NAME display in the SETUP mode.
*1 After the setting is completed, AUX is displayed on the unit.
*2 After the setting is completed, PMD is displayed on the unit.
Playing MP3/WMA/AAC Files with the
USB memory (Optional)
If you connect a USB memory containing MP3/WMA/AAC, you can
play these files on this unit.
1
Press SOURCE/
mode.
to switch to the USB AUDIO
The mode will change every time the button is pressed.
iPod*1 / AUX+*2
TUNER
DISC
USB AUDIO
BT AUDIO*3
AUX*4
TUNER
*1 Displayed only when the iPhone/iPod is connected and AUX+
SETUP is set to OFF, refer to “Setting the AUX+ SETUP Mode”
(page 17).
2
* Displayed only when the AUX+ SETUP is set to ON, refer to “Setting
the AUX+ SETUP Mode” (page 17).
*3 Only when BT IN is set to ADAPTER, refer to “Setting the Bluetooth
Connection (BT IN)” (page 16).
*4 Refer to “Using the Front AUX Input Terminal” (page 15).
2
To pause playback, press
Pressing
/
/
/ENT.
/ENT again will resume the playback.
• The root folder is displayed as “ROOT” in the Folder Name Search
mode.
• When a search is made in the USB mode, any song being played back
will be stopped.
• This unit plays back files on a USB memory device with the same
controls and modes as playback of CDs containing MP3/WMA/AAC.
For details, refer to “CD/MP3/WMA/AAC” on pages 8 to 11.
• Before disconnecting USB memory, be sure to change to another
source or set to pause.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
17-EN
USB Memory Connection (Optional)
iPhone/iPod
(Optional)
Connect USB memory
1
2
Open the cover of the USB connection terminal.
Connect the USB memory directly to the USB
connection terminal, or via the USB cable.
SOURCE/
Rotary encoder
This unit
1
2
45
6
USB Connection Terminal
USB memory
(Sold Separately)
or
/
USB memory
(Sold Separately)
Cable (Sold
Separately)
/ENT
Preset buttons
(1 through 6)
VIEW
/MUTE
/ESC
Remove USB memory
1
2
Carefully, pull out the USB memory from the USB
cable or the USB connection terminal.
Close the cover of the USB connection terminal.
• Change to a source other than the USB memory mode, then remove
the USB memory. If the USB memory is removed in the USB memory
mode, data may be damaged.
• When removing USB memory, pull it out straight.
• If sound is not output or USB memory is not recognized even when
USB memory is connected, remove USB memory once, then connect
it again.
• Route the USB cable away from other cables, etc.
• After removing the USB memory, close the cover of the USB
connection terminal to prevent dust or foreign objects from entering
and causing a malfunction.
About MP3/WMA/AAC File of USB
Memory
An iPhone/iPod can be connected to this unit by using the proprietary
ALPINE FULL SPEED™ Connection Cable (KCE-433iV) (sold
separately). When this unit is connected by using the cable, the controls
on the iPod are not functional.
• Set AUX+ SETUP to OFF when an iPhone/iPod is connected (refer
to “Setting the AUX+ SETUP Mode” on page 17).
• If the Bluetooth INTERFACE (KCE-400BT) and an iPhone/iPod are
connected at the same time, be sure to disconnect the iPhone/iPod
from the Bluetooth INTERFACE (KCE-400BT) while turning ACC to
OFF.
• If you connect an iPhone to this unit, it can be used as an iPod. If you
use iPhone as a hands-free phone, you need the optional Bluetooth
INTERFACE (KCE-400BT).
• Internet and telephone functions of iTouch or iPhone, etc., can also
be used when connecting to the unit. However, using these functions
will stop or pause the playing songs, at this time do not operate the
unit to avoid a malfunction.
• Do not leave an iPhone/iPod in a car, as its mechanism is sensitive to
high temperature and humidity conditions, and damage may result.
iPhones/iPods usable with this unit
Playing back MP3/WMA/AAC
MP3/WMA/AAC files are prepared, then stored to a USB
memory. This unit can recognize at least 100 folders (including
root folder) and 100 files per folder stored in USB memory.
Playback may not be performed if a USB memory exceeds the
limitations described above.
Do not make a file’s playback time more than 1 hour.
Media supported
This device can play back USB memory media.
Corresponding File Systems
This device supports FAT 12/16/32 for USB memory device.
• The unit can be used with the fifth generation and above
iPod, iPhone 3G, iPhone, iPod classic, iPod touch, the first
generation iPod nano, the second generation iPod nano or
the third generation iPod nano only. iPod Shuffle cannot be
used, however.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPhones/iPods.
iPhone 3G (version 2.0)
iPhone (version 1.1.4)
iPod touch (version 1.0.4)
iPod classic (version 1.1.1)
iPod nano (3rd generation) (version 1.1)
iPod nano (2nd generation) (version 1.1.3)
iPod with video (version 1.2.3)
iPod nano (1st generation) (version 1.3.1)
• For clarity in identifying your model of iPod, please see
Apple’s own document “Identifying iPod models” at
http://support.apple.com/kb/HT1353
• This unit does not support iPhone/iPod’s video playback
function, even using a video-compatible cable.
• If the unit is used with versions of iTunes earlier than 7.6,
correct function and performance are not guaranteed.
18-EN
1
Playback
1
The “
Press SOURCE/
to switch to the iPod mode.
or
Fast backward through current song:
Press and hold
.
Advance to the beginning of the next song:
Press
.
Fast forward through current song:
Press and hold
.
To pause playback, press
Pressing
/
/
/ENT.
/ENT again will resume playback.
•
A song playing on the iPhone/iPod while it is connected to this unit
will continue to play from where it was paused after disconnection.
• If you listen to an episode from a selected podcast or audiobook, the
or
2.
episode can be changed by pressing 1
• An episode may have several chapters, the chapter can be changed
or
.
by pressing
Searching for a desired Song
An iPhone/iPod can contain hundreds of songs. By using file tag
information and keeping these songs organized in playlists, this unit’s
search functions will ease song searches.
Each music category has its own individual hierarchy. Use the Playlist/
Artist/Album/Song/Podcast/Genre/Composer/Audiobook search mode
to narrow searches based on the table below.
Hierarchy 1
3
4
5
to select the desired song.
Return to the beginning of the current song:
Press
.
3
Hierarchy 2
/ESC to activate the search selection mode.
” indicator lights up.
Turn the Rotary encoder to select the ARTIST
search mode, and then press / /ENT.
PLAYLIST
GENRE
*1 Displayed only when the iPhone/iPod is connected and AUX+
SETUP is set to OFF, refer to “Setting the AUX+ SETUP Mode”
(page 17).
*2 Displayed only when the AUX+ SETUP is set to ON, refer to “Setting
the AUX+ SETUP Mode” (page 17).
*3 Displayed only when BT IN is set to BT ADAPTER. Refer to
“Bluetooth Setting” (page 16).
*4 Refer to “Using the Front AUX Input Terminal” (page 15).
Press
2
USB AUDIO
iPod*1/AUX+*2
AUX*4
TUNER
TUNER
DISC
BT AUDIO*3
2
Press
Hierarchy 3
Hierarchy 4
Playlist
Song
—
—
Artist*
Album*
Song
—
Album*
Song
—
—
Song
—
—
—
Podcast
Episode
—
—
Genre*
Artist*
Album*
Song
Composer*
Album*
Song
—
Audiobook
—
—
—
For example: Searching by Artist name
The following example explains how an ARTIST search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
ARTIST
ALBUM
SONG
COMPOSER
AUDIOBOOK
PODCAST
PLAYLIST
Turn the Rotary encoder to select the desired
Artist, and then press / /ENT.
Turn the Rotary encoder to select the desired
Album, and then press / /ENT.
Turn the Rotary encoder to select the desired
Song, and then press / /ENT.
• After pressing and holding / /ENT for at least 2 seconds while
in each hierarchy (except SONG and AUDIOBOOK hierarchy), all
songs of the selected hierarchy are played back.
• After selecting [ALL] in the search mode with“*”, press and hold
/ /ENT for at least 2 seconds to play back all songs in the
iPhone/iPod or selected search mode.
• While in the search mode, if you press and hold
/ESC for
2 seconds, or no operation is performed for 10 seconds, the search
mode is canceled.
• In the search mode, pressing
/MUTE will return to the previous
mode.
• When search is made during M.I.X. play, the M.I.X. play mode will be
canceled.
• “NO SONG” will be displayed if there are no songs in the selected
playlist in the PLAYLIST search mode.
• “NO PODCAST” will be displayed if there is no podcast data in the
iPhone/iPod in the PODCAST search mode.
• “NOAUDIOBOK” will be displayed if there is no audiobook data in
the iPhone/iPod in the AUDIOBOOK search mode.
• If “iPod name” stored in the iPhone/iPod is selected in the desired
Playlist search mode, and / /ENT is pressed, you can search for
all songs in the iPhone/iPod. Also, if you press and hold / /ENT
for at least 2 seconds, all songs in the iPhone/iPod are played back.
• Depending on the iPhone/iPod, podcast search is not supported.
• If any one of the preset buttons (1 through 6) is pressed in the search
mode, a search can be made quickly by skipping to the specified
location. For details, refer to “Direct Search Function” on page 20.
Quick Search
You can search a song from all songs in the iPhone/iPod without
selecting an album, artist, etc.
1
Press and hold
/ESC for at least 2 seconds to
activate the Quick Search mode.
The “
2
” indicator lights up.
Turn the Rotary encoder to select a desired song.
The selected song is played back immediately.
• Press and hold
/ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is canceled if no operation is performed
for 10 seconds.
• If many songs are in the iPhone/iPod, it takes time to search for
songs.
• If any one of the preset buttons (1 through 6) is pressed in the search
mode, a search can be made quickly by skipping to the specified
location. For details, refer to “Direct Search Function” on page 20.
• This function is inactive during repeat (
) playback.
19-EN
Direct Search Function
Random Play Shuffle (M.I.X.)
The unit’s direct search function can be used to search for an album,
song, etc., more efficiently. In PLAYLIST/ARTIST/ALBUM/SONG/
PODCAST/GENRE/COMPOSER/AUDIOBOOK mode, you can
quickly target any song.
The Shuffle function of the iPhone/iPod is displayed as
unit.
In the search mode, press any one of the preset
buttons (1 through 6) to quickly skip over a
designated percent of your song content.
Song search example:
If there are 100 songs in your iPhone/iPod, they are divided into
6 groups using percentages (shown below). These groups are
assigned to the preset buttons (1 through 6).
Shuffle Albums:
The songs on each album are played back in proper order. Upon
completion of all the songs on the album, the next album is
selected randomly. This continues until all albums have been
played.
Shuffle Songs:
Song shuffle randomly plays back songs within a selected
category (playlist, album, etc.). The songs within the category
are played just once until all songs have been played.
Example 1:
Suppose the song you are searching for is located at around
the middle (50%) of your library: press button 4 to jump to the
50th song and turn the Rotary encoder to find the desired
song.
1
Example 2:
Suppose the song you are searching for is located near the
end (83%) of your library: press button 6 to jump to the 83rd
song and turn the Rotary encoder to find the desired song.
2
0%
All 100 songs (100%)
17%
33%
50%
67%
on this
Press 5
.
The songs are played back in random sequence.
(off)
(Shuffle Albums)
(Shuffle Songs)
To cancel M.I.X. play, select (off) with the above
procedure.
• If a song is selected in the album search mode before selecting M.I.X.
play, the songs will not play back randomly even when Shuffle
Albums is selected.
83%
Preset
buttons
1
2
3
4
5
6
Songs
First
song
17th
song
33rd
song
50th
song
67th
song
83rd
song
Shuffle ALL:
Shuffle ALL plays all songs in the iPhone/iPod randomly. Any one
song does not play back again until all songs have been played
back.
1
Press 6.
The songs are played back in random sequence.
Select Playlist/Artist/Album/Genre/
Composer
Playlist/Artist/Album/Genre/Composer can be easily changed.
For example, if you listen to a song from a selected album, the album
can be changed.
Press 1
or
2 to select the desired Playlist/Artist/
Album/Genre/Composer.
• If the song search mode was used to select a song, this function is
inactive.
• If an album is selected during an artist search, other albums by that
artist are searchable.
• This function is inactive during shuffle (
) playback.
20-EN
(off)
(Shuffle ALL)
2
To cancel M.I.X. play, select (off) with the above
procedure.
• If Shuffle ALL is selected, the selected songs being played back in the
search mode are canceled.
Repeat Play
Only Repeat One is available for the iPhone/iPod.
Repeat One:
A single song is repeatedly played back.
1
Press
4.
The song is played back repeatedly.
(off)
(Repeat One)
2
To cancel repeat play, select (off) with the above
procedure.
• During repeat playback, no other songs are selectable by pressing
or
.
Displaying the Text
You can display the tag information of a song in the iPhone/iPod.
Press VIEW.
Each press changes the display.
• When the TEXT SCR is set to SCR MANU, press and hold VIEW for
at least 2 seconds, the current text will be scrolled one time.
TRACK NO./ELAPSED TIME
TRACK NO./CLOCK
ARTIST NAME*
ALBUM NAME*
SONG TITLE*
TRACK NO./ELAPSED TIME
* TAG information
“ARTIST”/“ALBUM”/“SONG” is displayed if there is no tag
information.
• Only alphanumeric characters (ASCII) can be displayed.
• If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
adapter. Therefore, a maximum of 250 characters is recommended.
The maximum number of characters for the head unit is 64
(64 byte).
• Some characters may not be correctly displayed.
• “NO SUPPORT” is displayed if text information is not supported by
the unit.
21-EN
Information
In Case of Difficulty
If you encounter a problem, please turn the power off, then on again. If
the unit is still not functioning normally, please review the items in the
following checklist. This guide will help you isolate the problem if the
unit is at fault. Otherwise, make sure the rest of your system is properly
connected or consult your authorized Alpine dealer.
Basic
No function or display.
• Vehicle’s ignition is off.
- If connected following instructions, the unit will not operate
with the vehicle’s ignition off.
• Improper power lead (Red) and battery lead (Yellow) connections.
- Check power lead and battery lead connections.
• Blown fuse.
- Check the fuse of the unit; replace with the proper value if
necessary.
• Internal micro-computer malfunctioned due to interference noise
etc.
- Press the RESET switch with a ballpoint pen or other pointed
article.
Radio
Unable to receive stations.
• No antenna or open connection in cable.
- Make sure the antenna is properly connected; replace the
antenna or cable if necessary.
Unable to tune stations in the seek mode.
• You are in a weak signal area.
- Make sure the tuner is in the DX mode.
• If the area you are in is a primary signal area, the antenna may
not be grounded and connected properly.
- Check your antenna connections; make sure the antenna is
properly grounded at its mounting location.
• The antenna may not be the proper length.
- Make sure the antenna is fully extended; if broken, replace the
antenna with a new one.
Broadcast is noisy.
• The antenna is not the proper length.
- Extend the antenna fully; replace it if it is broken.
• The antenna is poorly grounded.
- Make sure the antenna is grounded properly at its mounting
location.
CD
CD Player not functioning.
• Out of operating temperature range +50°C (+120°F) for CD.
- Allow the vehicle’s interior (or trunk) temperature to cool.
CD playback sound is wavering.
• Moisture condensation in the CD Module.
- Allow enough time for the condensation to evaporate (about 1
hour).
22-EN
CD insertion not possible.
• A CD is already in the CD player.
- Eject the CD and remove it.
• The CD is being improperly inserted.
- Make sure the CD is being inserted following instructions in
the CD Player Operation section.
Unable to fast forward or backward the CD.
• The CD has been damaged.
- Eject the CD and discard it; using a damaged CD in your unit
can cause damage to the mechanism.
CD playback sound skips due to vibration.
• Improper mounting of the unit.
- Securely re-mount the unit.
• The disc is very dirty.
- Clean the disc.
• The disc has scratches.
- Change the disc.
• The pick-up lens is dirty.
- Do not use a commercially available lens cleaner disc. Consult
your nearest Alpine dealer.
CD playback sound skips without vibration.
• The disc is dirty or scratched.
- Clean the disc; damaged disc should be replaced.
Error displays (built-in CD player only).
• Mechanical error.
- Press . After the error indication disappears, insert the disc
again. If the above-mentioned solution does not solve the
problem, consult your nearest Alpine dealer.
CD-R/CD-RW playback not possible.
• Close session (finalization) has not been performed.
- Perform finalization and attempt playback again.
MP3/WMA/AAC
MP3, WMA or AAC is not played back.
• Writing error occurred. The MP3/WMA/AAC format is not
compatible.
- Make sure the MP3/WMA/AAC has been written in a
supported format. Refer to “About MP3/WMA/AAC”
(pages 10-11), then rewrite in the format supported by this
device.
Audio
The sound is not output from the speakers.
• Unit has no output signal of the internal amplifier.
- POWER IC is switched to “POW ON” (page 16).
iPod
iPod does not play and no sound is output.
• The iPod has not been recognized.
- Reset this unit and the iPod. Refer to “Initial System Start-Up”
(page 6). To reset the iPod, refer to the Owner’s Manual of the
iPod.
Indication for CD Player
• No CD is inserted.
- Insert a CD.
• Although a disc is inserted, “NO DISC” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by following these steps:
Press the
button again for at least 2 seconds.
If the disc still does not eject, consult your Alpine dealer.
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
NO SUPPORT
• Mechanism error.
1) Press the
button and eject the CD.
If not ejecting, consult your Alpine dealer.
2) When the error indication remains after ejecting, press the
button again.
If the error indication still does not turn off after pressing the
button for a few times, consult your Alpine dealer.
• Text information that is not recognizable by the unit has been input.
- Use a USB memory device with input text information that is
supported by the unit.
Indication for iPod Mode
• When “ERROR” is displayed:
If the disc cannot be ejected by pressing , press the RESET switch
(refer to page 6) and press
again.
If the disc still cannot be ejected, consult your Alpine dealer.
• The iPhone/iPod is not connected.
- Make sure the iPhone/iPod is correctly connected (refer to
“Connections”).
Make sure the cable is not bent excessively.
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
• There are no songs in the iPhone/iPod.
- Download songs to the iPhone/iPod and connect to this unit.
• A sampling rate/bit rate not supported by the unit is used.
- Use a sampling rate/bit rate that is supported by the unit.
• Communication error.
- Turn the ignition key off, and then set to ON again.
- Reset the iPod.
- Check the display by reconnecting between the iPhone/iPod
and this unit, using the iPhone/iPod cable.
Indication for USB memory
• Abnormal current is run to the USB connector device (an error
message may be displayed if the USB device that is not
compatible with the unit is connected).
USB memory is a malfunction or it is shorted.
- Connect another USB memory.
UNIT ERROR
• Caused by the iPhone/iPod Software Version not being
compatible with this unit.
- Update the iPhone/iPod Software Version to be compatible with this unit.
• The iPhone/iPod is not verified.
- Reset the iPod.
- Try another iPhone/iPod, if available.
• A USB device that is not supported by the unit is connected.
- Connect a USB device that is supported by the unit.
NO DEVICE
• A USB memory is not connected.
- Make sure the USB memory device is correctly connected and
the cable is not excessively bent.
• No song (file) is stored in the USB memory.
- Connect the USB memory device after storing songs (files).
• Power surge error.
- Excessive voltage/current is supplied to the iPhone/iPod.
- Try another iPhone/iPod, if available.
Indication for all Modes
• Malfunction occurred as a result of the speaker cable shorting on
the car chassis.
- Route the cable correctly, and set POWER IC to POW ON (page 16).
If the above solution does not work, consult your nearest dealer.
23-EN
CHASSIS SIZE
Specifications
Width
Height
Depth
FM TUNER SECTION
Tuning Range
Mono Usable Sensitivity
50 dB Quieting Sensitivity
Alternate Channel Selectivity
Signal-to-Noise Ratio
Stereo Separation
Capture Ratio
87.7-107.9 MHz
9.3 dBf (0.8 µV/75 ohms)
13.5 dBf (1.3 µV/75 ohms)
80 dB
65 dB
35 dB
2.0 dB
AM TUNER SECTION
Tuning Range
Sensitivity (IEC Standard)
530-1,710 kHz
22.5 µV/27 dB
CD PLAYER SECTION
Frequency Response
Wow & Flutter (% WRMS)
Total Harmonic Distortion
Dynamic Range
Signal-to-Noise Ratio
Channel Separation
5-20,000 Hz (±1 dB)
Below measurable limits
0.008% (at 1 kHz)
95 dB (at 1 kHz)
105 dB
85 dB (at 1 kHz)
PICKUP
Wave length
Laser power
795 nm
CLASS I
USB SECTION
USB requirements
USB 1.1/2.0
Max. Power Consumption
500 mA
USB Class
Mass Storage
File System
FAT 12/16/32
MP3 Decoding
MPEG-1/2 AUDIO Layer-3
WMA Decoding
Windows Media™ Audio
AAC Decoding
AAC-LC format “.m4a” file
Number of Channels
2-Channel (Stereo)
Frequency Response*
5-20,000 Hz (±1 dB)
Total Harmonic Distortion
0.008% (at 1 kHz)
Dynamic Range
95 dB (at 1 kHz)
Signal-to-Noise Ratio
105 dB
Channel Separation
85 dB (at 1 kHz)
* Frequency response may differ depending on the encoder
software/bit rate.
GENERAL
Power Requirement
14.4 V DC
(11-16 V allowable)
Power Output
18 W RMS × 4*
* Primary amplifier ratings per CEA-2006 Standard
• Power output: measured at 4 Ohms and 1% THD+N
• S/N: 80 dBA (reference: 1 W into 4 Ohms)
Maximum Pre-Output Voltage
2 V/10 k ohms
Bass
±14 dB at 100 Hz
Treble
±14 dB at 10 kHz
Weight
1.5 kg (3 lbs. 4 oz)
24-EN
178 mm (7")
50 mm (2")
161 mm (6-3/8")
NOSEPIECE SIZE
Width
Height
Depth
170 mm (6-3/4")
46 mm (1-13/16")
25 mm (1")
• Due to continuous product improvement, specifications and design
are subject to change without notice.
Installation and Connections
Before installing or connecting the unit, please read the
following and pages 3 to 5 of this manual thoroughly for
proper use.
Caution
HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS.
Warning
MAKE THE CORRECT CONNECTIONS.
The wiring and installation of this unit requires special technical
skill and experience. To ensure safety, always contact the dealer
where you purchased this product to have the work done.
Failure to make the proper connections may result in fire or product
damage.
USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM
SECURELY.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND.
Be sure to use only the specified accessory parts. Use of other than
designated parts may damage this unit internally or may not
securely install the unit in place. This may cause parts to become
loose resulting in hazards or product failure.
(Check with your dealer if you are not sure.) Failure to do so may
result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE
NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to
electrical shorts.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN
SURROUNDING OBJECTS.
Arrange wiring and cables in compliance with the manual to
prevent obstructions when driving. Cables or wiring that obstruct or
hang up on places such as the steering wheel, gear lever, brake
pedals, etc. can be extremely hazardous.
DO NOT SPLICE INTO ELECTRICAL CABLES.
Never cut away cable insulation to supply power to other
equipment. Doing so will exceed the current carrying capacity of
the wire and result in fire or electric shock.
DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.
When drilling holes in the chassis for installation, take precautions
so as not to contact, damage or obstruct pipes, fuel lines, tanks or
electrical wiring. Failure to take such precautions may result in fire.
DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING
SYSTEMS TO MAKE GROUND CONNECTIONS.
Bolts or nuts used for the brake or steering systems (or any other
safety-related system), or tanks should NEVER be used for
installations or ground connections. Using such parts could disable
control of the vehicle and cause fire etc.
KEEP SMALL OBJECTS SUCH AS BATTERIES OUT OF THE
REACH OF CHILDREN.
Swallowing them may result in serious injury. If swallowed,
consult a physician immediately.
DO NOT INSTALL IN LOCATIONS WHICH MIGHT HINDER
VEHICLE OPERATION, SUCH AS THE STEERING WHEEL OR
GEARSHIFT.
Doing so may obstruct forward vision or hamper movement etc.
and results in serious accident.
IMPORTANT
Please record the serial number of your unit in the space provided
below and keep it as a permanent record. The serial number or the
engraved serial number is located on the bottom of the unit.
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR
PINCHED BY A SHARP METAL EDGE.
Route the cables and wiring away from moving parts (like the seat
rails) or sharp or pointed edges. This will prevent crimping and
damage to the wiring. If wiring passes through a hole in metal, use
a rubber grommet to prevent the wire’s insulation from being cut by
the metal edge of the hole.
DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR
DUST.
Avoid installing the unit in locations with high incidence of
moisture or dust. Moisture or dust that penetrates into this unit may
result in product failure.
Precautions
• Be sure to disconnect the cable from the (–) battery post before
installing your CDE-102. This will reduce any chance of damage
to the unit in case of a short-circuit.
• Be sure to connect the color coded leads according to the
diagram. Incorrect connections may cause the unit to
malfunction or damage to the vehicle’s electrical system.
• When making connections to the vehicle’s electrical system, be
aware of the factory installed components (e.g. on-board
computer). Do not tap into these leads to provide power for this
unit. When connecting the CDE-102 to the fuse box, make sure
the fuse for the intended circuit of the CDE-102 has the
appropriate amperage. Failure to do so may result in damage to
the unit and/or the vehicle. When in doubt, consult your Alpine
dealer.
• The CDE-102 uses female RCA-type jacks for connection to
other units (e.g. amplifier) having RCA connectors. You may
need an adaptor to connect other units. If so, please contact your
authorized Alpine dealer for assistance.
• Be sure to connect the speaker (–) leads to the speaker (–)
terminal. Never connect left and right channel speaker cables to
each other or to the vehicle body.
SERIAL NUMBER:
INSTALLATION DATE:
INSTALLATION TECHNICIAN:
PLACE OF PURCHASE:
25-EN
Reinforce the head unit with the metal mounting
strap (not supplied). Secure the ground lead of the
unit to a clean metal spot using a screw (*1) already
attached to the vehicle’s chassis.
Installation
• For the screw marked “*2”, use an appropriate screw for the chosen
mounting location.
Connect each input lead coming from an amplifier to
the corresponding output lead coming from the left
rear of the CDE-102. Connect all other leads of the
CDE-102 according to details described in the
CONNECTlONS section.
Detachable Front
Panel
Caution
When you install this unit in your car, do not remove the
detachable front panel.
If the detachable front panel is removed during installation, you
might press too hard and warp the metal plate that holds it in
place.
• The main unit must be mounted within 35 degrees of the horizontal
plane, back to front.
3
Slide the CDE-102 into the dashboard until it clicks.
This ensures that the unit is properly locked and will
not accidentally come out from the dashboard.
Install the detachable front panel.
Removal
1. Remove the detachable front panel.
2. Insert the bracket keys into the unit, along the guides
on either side. The unit can now be removed from the
mounting sleeve.
Less than 35°
This unit
Bracket Keys
(Included)
1
Mounting Sleeve
(Included)
Dashboard
3. Pull the unit out, keeping it unlocked as you do so.
<JAPANESE CAR>
Pressure Plates*
Front Frame
This unit
* If the installed mounting sleeve is loose in the dashboard, the
pressure plates may be bent slightly to remedy the problem.
Remove the mounting sleeve from the main unit (see
“Removal” on page 26).
2
Screws (M5 × 8)
(Included)
This unit
Ground Lead
*3
Screw
Hex Nut (M5)
*2
Mounting Bracket
Bolt Stud
Secure the ground lead of the unit to a clean metal spot using a screw
(*3) already attached to the vehicle’s chassis.
Metal
Mounting
Strap
*1
This unit
Ground Lead
Chassis
26-EN
Connections
or
To iPhone/iPod
To Bluetooth INTERFACE (KCE-400BT)
(sold separately)
Antenna
POWER ANT
Blue
Blue/White
REMOTE TURN-ON
Pink/Black
AUDIO INTERRUPT IN
Orange
Red
ILLUMINATION
To power antenna
To amplifier
To vehicle phone
To the instrument cluster illumination
lead
IGNITION
Ignition Key
Yellow
Black
BATTERY
GND
Gray
SPEAKER
RIGHT FRONT
Battery
Speakers
Front Right
Gray/Black
Violet/Black
SPEAKER
RIGHT REAR
Rear Right
Violet
Green
SPEAKER
LEFT REAR
Rear Left
Green/Black
White/Black
SPEAKER
LEFT FRONT
Front Left
White
Speakers
Front Left
Amplifier
Front Right
Amplifier
Rear or
Subwoofers*
* When Subwoofer is OFF: Output is for Rear speakers. When Subwoofer is ON: Output is for Subwoofer.
For details on how to set the Subwoofer to ON/OFF, see “Subwoofer On and Off” on page 16.
27-EN
Antenna Receptacle
Left Rear (+) Speaker Output Lead (Green)
Power Antenna Lead (Blue)
Left Rear (–) Speaker Output Lead (Green/Black)
Connect this lead to the +B terminal of your power antenna,
if applicable.
Left Front (–) Speaker Output Lead (White/Black)
• This lead should be used only for controlling the vehicle’s power
antenna. Do not use this lead to turn on an amplifier or a signal
processor, etc.
Left Front (+) Speaker Output Lead (White)
Fuse Holder (10A)
Front Output RCA Connectors
RED is right and WHITE is left.
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor.
Rear/Subwoofer Output RCA Connectors
RCA Extension Cable (sold separately)
Audio Interrupt In Lead (Pink/Black)
RED is right and WHITE is left.
Connect this lead to the Audio interface output of a cellular
phone which provides ground shorting when a call is
received.
Full Speed connector
Illumination Lead (Orange)
This lead may be connected to the vehicle’s instrument
cluster illumination lead. This will allow the backlighting of
this unit to dim whenever the vehicle’s lights are turned on.
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the vehicle’s fuse
box or another unused power source which provides (+)12V
only when the ignition is turned on or in the accessory
position.
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the vehicle’s
battery.
Ground Lead (Black)
Connect this lead to a good chassis ground on the vehicle.
Make sure the connection is made to bare metal and is
securely fastened using the sheet metal screw provided.
Power Supply Connector
Control iPhone/iPod signals.
Connect this to an iPhone/iPod (or to an optional Bluetooth
INTERFACE (KCE-400BT)). To use a hands-free mobile
phone, an optional Bluetooth INTERFACE (KCE-400BT)
connection is required. For details on connection, refer to
the Owner’s Manual of the Bluetooth INTERFACE
(KCE-400BT). You can also connect this to an external
device (such as a portable player) by using conversion
cable (KCA-237B) for building up the AUX IN (sold
separately).
* Refer to “Setting the AUX+ SETUP Mode” (page 17).
AUX+ ON : When the external device is connected.
AUX+ OFF: When an iPhone/iPod is connected.
FULL SPEEDTM Connection Cable (KCE-433iV) (sold
separately)
KCE-400BT Connection Cable (Included with
KCE-400BT)
Front AUX Input Terminal
Right Front (–) Speaker Output Lead (Gray/Black)
This terminal allows for input of audio from an external
device (such as a portable player), using a commerciallyavailable converter cable.
Right Rear (–) Speaker Output Lead (Violet/Black)
USB Connection Terminal
Right Front (+) Speaker Output Lead (Gray)
Right Rear (+) Speaker Output Lead (Violet)
Connect USB memory (sold separately)
To prevent external noise from entering the audio system.
• Locate the unit and route the leads at least 10 cm away from the car harness.
• Keep the battery power leads as far away from other leads as possible.
• Connect the ground lead securely to a bare metal spot (remove any paint, dirt or grease if necessary) of the car chassis.
• If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various noise
suppressors, contact them for further information.
• Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.
28-EN
LIMITED WARRANTY
ALPINE ELECTRONICS OF AMERICA, INC. AND ALPINE OF CANADA INC. (“Alpine”), are dedicated to quality craftsmanship and
are pleased to offer this Warranty. We suggest that you read it thoroughly. Should you have any questions, please contact your Dealer
or contact Alpine at one of the telephone numbers listed below.
PRODUCTS COVERED:
This Warranty covers Car Audio Products and Related
Accessories (“the product”). Products purchased in the Canada
are covered only in the Canada. Products purchased in the
U.S.A. are covered only in the U.S.A.
LENGTH OF WARRANTY:
This Warranty is in effect for one year from the date of the first
consumer purchase.
WHO IS COVERED:
This Warranty only covers the original purchaser of the product,
who must reside in the United States, Puerto Rico or Canada.
WHAT IS COVERED:
This Warranty covers defects in materials or workmanship (parts
and labor) in the product.
WHAT IS NOT COVERED:
This Warranty does not cover the following:
A Damage occurring during shipment of the product to Alpine
for repair (claims must be presented to the carrier).
B Damage caused by accident or abuse, including burned
voice coils caused by over-driving the speaker (amplifier level
is turned up and driven into distortion or clipping). Speaker
mechanical failure (e.g. punctures, tears or rips). Cracked or
damaged LCD panels. Dropped or damaged hard drives.
C Damage caused by negligence, misuse, improper operation
or failure to follow instructions contained in the Owner’s
manual.
D Damage caused by act of God, including without limitation,
earthquake, fire, flood, storms or other acts of nature.
Any cost or expense related to the removal or reinstallation of
the product.
E Service performed by an unauthorized person, company or
association.
F Any product which has the serial number defaced, altered or
removed.
G Any product which has been adjusted, altered or modified
without Alpine’s consent.
H Any product not distributed by Alpine within the United
States, Puerto Rico or Canada.
I Any product not purchased from an Authorized Alpine
Dealer.
HOW TO OBTAIN WARRANTY SERVICE:
A You are responsible for delivery of the product to an
Authorized Alpine Service Center or Alpine for repair and for
payment of any initial shipping charges. Alpine will, at its
option, repair or replace the product with a new or
reconditioned product without charge. If the repairs are
covered by the warranty, and if the product was shipped to an
Authorized Alpine Service Center or Alpine, Alpine will pay
the return shipping charges.
B You should provide a detailed description of the problem(s)
for which service is required.
C You must supply proof of your purchase of the product.
D You must package the product securely to avoid damage
during shipment. To prevent lost packages it is
recommended to use a carrier that provides a tracking
service.
HOW WE LIMIT IMPLIED WARRANTIES:
ANY IMPLIED WARRANTIES INCLUDING FITNESS FOR USE
AND MERCHANTABILITY ARE LIMITED IN DURATION TO
THE PERIOD OF THE EXPRESS WARRANTY SET FORTH
ABOVE AND NO PERSON IS AUTHORIZED TO ASSUME FOR
ALPINE ANY OTHER LIABILITY IN CONNECTION WITH THE
SALE OF THE PRODUCT.
HOW WE EXCLUDE CERTAIN DAMAGES:
ALPINE EXPRESSLY DISCLAIMS LIABILITY FOR
INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY
THE PRODUCT. THE TERM “INCIDENTAL DAMAGES”
REFERS TO EXPENSES OF TRANSPORTING THE
PRODUCT TO THE ALPINE SERVICE CENTER, LOSS OF
THE ORIGINAL PURCHASER’S TIME, LOSS OF THE USE OF
THE PRODUCT, BUS FARES, CAR RENTALS OR OTHERS
COSTS RELATING TO THE CARE AND CUSTODY OF THE
PRODUCT. THE TERM “CONSEQUENTIAL DAMAGES”
REFERS TO THE COST OF REPAIRING OR REPLACING
OTHER PROPERTY WHICH IS DAMAGED WHEN THIS
PRODUCT DOES NOT WORK PROPERLY. THE REMEDIES
PROVIDED UNDER THIS WARRANTY ARE EXCLUSIVE AND
IN LIEU OF ALL OTHERS.
HOW STATE/PROVINCIAL LAW RELATES TO THE
WARRANTY:
This Warranty gives you specific legal rights, and you may also
have other rights which vary from state to state and province to
province. In addition, some states/provinces do not allow
limitations on how long an implied warranty lasts, and some do
not allow the exclusion or limitation of incidental or
consequential damages. Accordingly, limitations as to these
matters contained herein may not apply to you.
IN CANADA ONLY:
This Warranty is not valid unless your Alpine car audio product
has been installed in your vehicle by an Authorized Installation
Center, and this warranty stamped upon installation by the
installation center.
HOW TO CONTACT CUSTOMER SERVICE:
Should the product require service, please call the following
number for your nearest Authorized Alpine Service Center.
CAR AUDIO
1-800-ALPINE-1 (1-800-257-4631)
NAVIGATION
1-888-NAV-HELP (1-888-628-4357)
Or visit our website at; http://www.alpine-usa.com
ALPINE ELECTRONICS OF AMERICA, INC., 19145 Gramercy Place, Torrance, California 90501, U.S.A.
ALPINE ELECTRONICS OF CANADA, INC., 777 Supertest Road, Toronto, Ontario M3J 2M9, Canada
Do not send products to these addresses.
Call the toll free telephone number or visit the website to locate a service center.
Download PDF