9 01-12

9 01-12
9 01-12
1
9 01-12
SUBJECT
DATE
Installation of the Oil Thermostat
September 2012
Additions, Revisions, or Updates
Publication Number / Title
DDC-SVC-MAN-0081
Platform
Section Title
Change
DD Platform
Installation of the Oil
Thermostat
Added torque spec sequence with graphic.
All information subject to change without notice.
9 01-12 Copyright © 2012 DETROIT DIESEL CORPORATION
3
2 Installation of the Oil Thermostat
2
Installation of the Oil Thermostat
Install as follows:
1. Install a new O-ring (4) on the oil thermostat (5).
2. Using tool W470589030900, install the thermostat to the oil coolant module housing. Torque to 50 N·m (37 lb·ft).
3. Install new seal (4), install the oil thermostat cover (1) to the oil coolant module (3) using four bolts (2), and hand
tighten.
4
All information subject to change without notice.
Copyright © 2012 DETROIT DIESEL CORPORATION 9 01-12
9 01-12
4. Torque the bolts to 30 N·m (22 lb·ft) using the torque sequence below.
5. Connect the electrical harness to the sensor.
6. Clip the electrical harness to the oil thermostat cover.
All information subject to change without notice.
9 01-12 Copyright © 2012 DETROIT DIESEL CORPORATION
5
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement