Clarion | DXZ758RMC | Owner`s manual | Clarion DXZ758RMC Owner`s manual

Owner’s manual / Mode d’emploi
Bedienungsanleitung / Istruzioni per l’uso
Gebruiksaanwijzing / Manual de instrucciones
Bruksanvisning / Manual de instruções
DXZ758RMC
CD/MP3/WMA Receiver / CeNET Control
& Music Catcher
•
Récepteur CD/MP3/WMA / Contrôle CeNet et
Music Catcher
•
CD/MP3/WMA-Receiver mit CeNET-Steuerung
und Music Catcher
•
Lettore CD/MP3/WMA / Comando CeNET con Music
Catcher
•
CD/MP3/WMA Receiver / CeNET Control & Music Catcher
•
Receptor de CD/MP3/WMA / Control CeNet y Music
Catcher
•
CD/MP3/WMA-spelare/CeNET Control & Music
Catcher
•
CD/MP3/WMA Receiver / CeNET Control & Music Catcher
Clarion Co., Ltd.
2004/12
All Rights Reserved. Copyright © 2004: Clarion Co., Ltd.
Printed in China / Imprimé en Chine / Gedruckt in China / Stampato in Cina
Gedrukt in China / Impreso en China / Tryckt i Kina / Impresso na China
PE-2742E
280-8170-00
Thank you for purchasing this Clarion product.
∗ Please read this owner’s manual in its entirety before operating this equipment.
∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment).
∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.
∗ This manual includes the operating procedures of the CD changer, DAB and TV tuner connected
via the CeNET cable. The CD changer and TV tuner have their own manuals, but no explanations
for operating them are described.
CAUTIONS:
This appliance contains a laser system and
is classified as a “CLASS 1 LASER
PRODUCT”. To use this model properly,
read this Owner’s Manual carefully and keep
this manual for your future reference. In
case of any trouble with this player, please
contact your nearest “AUTHORIZED service
station”. To prevent direct exposure to the
laser beam, do not try to open the enclosure.
OBS!
Apparaten innehåller laserkomponenten
som avger laserstrålning överstigande
gränsen för laserklass 1.
VAROITUS
Suojakoteloa si saa avata. Laite sisältää
laserdiodin, joka lähettää näkymätöntä
silmille vaarallista lasersäteilyä.
!CAUTION
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED IN THE OWNER’S
MANUAL MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
ADVARSEL.
Denne mærking er anbragt udvendigt på
apparatet og indikerer, at apparatet arbejder
med laserstråler af klasse 1, hvilket betyder,
at der anvendes laserstråler af svageste
klasse, og at man ikke på apparatets
yderside kan blive udsat for utilladelig
kraftig stråling.
APPARATET BØR KUN ÅBNES AF
FAGFOLK MED SÆRLIGT KENDSKAB TIL
APPARATER MED LASERSTRÅLER!
Indvendigt i apparatet er anbragt den her
gengivne advarselsmækning, som advarer
imod at foretage sådanne indgreb i
apparatet, at man kan komme til at udsaætte
sig for laserstråling.
2
DXZ758RMC
280-8033-00
280-8710-00
Source indication
Performance information,
Operation contents indication
: Disc icon
: Play list icon
: Folder icon
: Track icon
Operation status indication,
Title indication
Clock, Mute indication
Spectrum analyzer display,
Function indication
Source icon
• You can select from 5 display patterns in the “SPE/ANA PTN” setting.
Sub icon
: Trick play indication
Level bar display
Sub display
Level bar display
Title display
1. PRECAUTIONS
Spectrum analyzer display
• You can select from 4 display
patterns in the “SPE/ANA PTN”
setting.
• You cannot change the combination of the upper and
lower title to your preference.
The user title is displayed only in the upper title, and the
lower title does not appear.
• The title display does not appear in the TV, AUX or DVD
changer mode.
Operation status indication,
Title indication
LCD Screen
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.
The screen will recover when it returns to normal temperature.
8
1. PRECAUTIONS .............................................................................................................................. 3
Sloping Console .............................................................................................................................. 3
Handling Compact Discs ................................................................................................................. 4
2. CONTROLS .................................................................................................................................... 5
3. NOMENCLATURE .......................................................................................................................... 6
Names of the Buttons and Their Functions ..................................................................................... 6
Major Button Operations When External Equipment is Connected to This Unit .............................. 7
Display Items ................................................................................................................................... 8
LCD Screen ..................................................................................................................................... 8
4. DCP ................................................................................................................................................. 9
5. REMOTE CONTROL ..................................................................................................................... 10
Inserting the Battery ...................................................................................................................... 10
Functions of the Remote Control Unit Buttons ............................................................................... 11
6. OPERATIONS ............................................................................................................................... 12
Basic Operations ........................................................................................................................... 12
Radio Operations ........................................................................................................................... 15
RDS Operations ............................................................................................................................ 16
CD/MP3/WMA Operations ............................................................................................................. 20
MUSIC CATCHER Operations ...................................................................................................... 24
Common Operations ..................................................................................................................... 26
7. OPERATIONS OF ACCESSORIES .............................................................................................. 32
CD Changer Operations ................................................................................................................ 32
TV Operations ............................................................................................................................... 34
Digital Radio/DAB Operations ....................................................................................................... 35
8. IN CASE OF DIFFICULTY ............................................................................................................ 39
9. ERROR DISPLAYS ....................................................................................................................... 40
10. SPECIFICATIONS ......................................................................................................................... 41
DXZ758RMC
1. This unit is applicable for on-road 4 wheel
vehicle purpose only. Use for tractor, fork
truck, bulldozer, off road vehicle, 2 or 3
wheel motor bicycle, marine boat or other
special purpose vehicle is not appropriate.
2. When the inside of the car is very cold and
the player is used soon after switching on the
heater moisture may form on the disc or the
optical parts of the player and proper playback may not be possible. If moisture forms
on the disc, wipe it off with a soft cloth. If
moisture forms on the optical parts of the
player, do not use the player for about one
hour. The condensation will disappear naturally allowing normal operation.
3. Driving on extremely bumpy roads which
cause severe vibration may cause the CD to
skip.
INFORMATION FOR USERS:.
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY.
Sloping Console
This unit uses sloping console to make largescreen displays possible.
When you use the sloping console, be sure to
close it.
the SLOPING CONSOLE tries to close, the
safety mechanism is triggered and the
SLOPING CONSOLE returns to the open
state. If this happens, remove the obstruction, then press the [Q] button.
5. To avoid scratching the compact disc, keep
the 12 or 8 cm CD level when inserting or removing them.
Handling Compact Discs
Use only compact discs bearing the
mark.
or
Do not play heart-shaped, octagonal, or other
specially shaped compact discs.
Some CDs recorded in CD-R/CD-RW mode
may not be usable.
Handling
• Compared to ordinary music CDs, CD-R and
CD-RW discs are both easily affected by high
temperature and humidity and some of CD-R
and CD-RW discs may not be played.
Therefore, do not leave them for a long time in
the car.
• New discs may have some roughness around
the edges. If such discs are used, the player
may not work or the sound may skip. Use a
ball-point pen or the like to remove any roughness from the edge of the disc.
Ball-point pen
Roughness
CAUTION
• Never play a compact disc with any cellophane tape or other glue on it or with peeling
off marks. If you try to play such a compact
disc, you may not be able to get it back out of
the CD player or it may damage the CD
player.
• Do not use compact discs that have large
scratches, are misshapen, cracked, etc. Use
of such discs may cause misoperation or
damage.
• To remove a compact disc from its storage
case, press down on the center of the case
and lift the disc out, holding it carefully by the
edges.
• Do not use commercially available CD protection sheets or discs equipped with stabilizers,
etc. These may damage the disc or cause
breakdown of the internal mechanism.
Storage
• Do not expose compact discs to direct sunlight or any heat source.
• Do not expose compact discs to excess humidity or dust.
• Do not expose compact discs to direct heat
from heaters.
Cleaning
BE CAREFUL NOT TO GET YOUR FINGERS
CAUGHT WHEN OPENING AND CLOSING
THE SLOPING CONSOLE.
1. For safety’s sake, always close the SLOPING CONSOLE before leaving this unit unused for a prolonged period or switching
OFF the ignition key.
If you switch OFF the ignition key with the
SLOPING CONSOLE tilted, the SLOPING
CONSOLE does not close.
2. Before the SLOPING CONSOLE closes,
there may be a braking sound from the
safety mechanism. This is normal.
DXZ758RMC
280-8170-00
3. If you move the SLOPING CONSOLE by
hand, this may create play. To correct this
play, with the power on for the unit, press the
[Q] button to close the SLOPING CONSOLE.
4. After a disc is ejected, the SLOPING CONSOLE automatically returns to the tilted or
closed state. If there is any obstruction when
280-8170-00
• Never stick labels on the surface of the compact disc or mark the surface with a pencil or
pen.
• To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the center of the compact disc to the circumference.
• Do not use any solvents, such as commercially available cleaners, anti-static spray, or
thinner to clean compact discs.
• After using special compact disc cleaner, let
the compact disc dry off well before playing it.
Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.
Bitte ausbreiten und die nächste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva.
Volgende pagina uitvouwen en doorlezen a.u.b. / Cerciórese de desplegar y de leer la página siguiente.
Glöm inte att vika ut och läsa nästa sida. / Não deixe de abrir e ler a próxima página.
3
DXZ758RMC
280-8170-00
4
English
English
Main display
English
Contents
Display Items
Source indication
Performance information,
Operation contents indication
: Disc icon
: Play list icon
: Folder icon
: Track icon
Operation status indication,
Title indication
Clock, Mute indication
Spectrum analyzer display,
Function indication
Source icon
• You can select from 5 display patterns in the “SPE/ANA PTN” setting.
Sub icon
: Trick play indication
Level bar display
Sub display
Level bar display
Title display
1. PRECAUTIONS
Spectrum analyzer display
• You can select from 4 display
patterns in the “SPE/ANA PTN”
setting.
• You cannot change the combination of the upper and
lower title to your preference.
The user title is displayed only in the upper title, and the
lower title does not appear.
• The title display does not appear in the TV, AUX or DVD
changer mode.
Operation status indication,
Title indication
LCD Screen
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.
The screen will recover when it returns to normal temperature.
8
1. PRECAUTIONS .............................................................................................................................. 3
Sloping Console .............................................................................................................................. 3
Handling Compact Discs ................................................................................................................. 4
2. CONTROLS .................................................................................................................................... 5
3. NOMENCLATURE .......................................................................................................................... 6
Names of the Buttons and Their Functions ..................................................................................... 6
Major Button Operations When External Equipment is Connected to This Unit .............................. 7
Display Items ................................................................................................................................... 8
LCD Screen ..................................................................................................................................... 8
4. DCP ................................................................................................................................................. 9
5. REMOTE CONTROL ..................................................................................................................... 10
Inserting the Battery ...................................................................................................................... 10
Functions of the Remote Control Unit Buttons ............................................................................... 11
6. OPERATIONS ............................................................................................................................... 12
Basic Operations ........................................................................................................................... 12
Radio Operations ........................................................................................................................... 15
RDS Operations ............................................................................................................................ 16
CD/MP3/WMA Operations ............................................................................................................. 20
MUSIC CATCHER Operations ...................................................................................................... 24
Common Operations ..................................................................................................................... 26
7. OPERATIONS OF ACCESSORIES .............................................................................................. 32
CD Changer Operations ................................................................................................................ 32
TV Operations ............................................................................................................................... 34
Digital Radio/DAB Operations ....................................................................................................... 35
8. IN CASE OF DIFFICULTY ............................................................................................................ 39
9. ERROR DISPLAYS ....................................................................................................................... 40
10. SPECIFICATIONS ......................................................................................................................... 41
DXZ758RMC
1. This unit is applicable for on-road 4 wheel
vehicle purpose only. Use for tractor, fork
truck, bulldozer, off road vehicle, 2 or 3
wheel motor bicycle, marine boat or other
special purpose vehicle is not appropriate.
2. When the inside of the car is very cold and
the player is used soon after switching on the
heater moisture may form on the disc or the
optical parts of the player and proper playback may not be possible. If moisture forms
on the disc, wipe it off with a soft cloth. If
moisture forms on the optical parts of the
player, do not use the player for about one
hour. The condensation will disappear naturally allowing normal operation.
3. Driving on extremely bumpy roads which
cause severe vibration may cause the CD to
skip.
INFORMATION FOR USERS:.
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY.
Sloping Console
This unit uses sloping console to make largescreen displays possible.
When you use the sloping console, be sure to
close it.
the SLOPING CONSOLE tries to close, the
safety mechanism is triggered and the
SLOPING CONSOLE returns to the open
state. If this happens, remove the obstruction, then press the [Q] button.
5. To avoid scratching the compact disc, keep
the 12 or 8 cm CD level when inserting or removing them.
Handling Compact Discs
Use only compact discs bearing the
mark.
or
Do not play heart-shaped, octagonal, or other
specially shaped compact discs.
Some CDs recorded in CD-R/CD-RW mode
may not be usable.
Handling
• Compared to ordinary music CDs, CD-R and
CD-RW discs are both easily affected by high
temperature and humidity and some of CD-R
and CD-RW discs may not be played.
Therefore, do not leave them for a long time in
the car.
• New discs may have some roughness around
the edges. If such discs are used, the player
may not work or the sound may skip. Use a
ball-point pen or the like to remove any roughness from the edge of the disc.
Ball-point pen
Roughness
CAUTION
• Never play a compact disc with any cellophane tape or other glue on it or with peeling
off marks. If you try to play such a compact
disc, you may not be able to get it back out of
the CD player or it may damage the CD
player.
• Do not use compact discs that have large
scratches, are misshapen, cracked, etc. Use
of such discs may cause misoperation or
damage.
• To remove a compact disc from its storage
case, press down on the center of the case
and lift the disc out, holding it carefully by the
edges.
• Do not use commercially available CD protection sheets or discs equipped with stabilizers,
etc. These may damage the disc or cause
breakdown of the internal mechanism.
Storage
• Do not expose compact discs to direct sunlight or any heat source.
• Do not expose compact discs to excess humidity or dust.
• Do not expose compact discs to direct heat
from heaters.
Cleaning
BE CAREFUL NOT TO GET YOUR FINGERS
CAUGHT WHEN OPENING AND CLOSING
THE SLOPING CONSOLE.
1. For safety’s sake, always close the SLOPING CONSOLE before leaving this unit unused for a prolonged period or switching
OFF the ignition key.
If you switch OFF the ignition key with the
SLOPING CONSOLE tilted, the SLOPING
CONSOLE does not close.
2. Before the SLOPING CONSOLE closes,
there may be a braking sound from the
safety mechanism. This is normal.
DXZ758RMC
280-8170-00
3. If you move the SLOPING CONSOLE by
hand, this may create play. To correct this
play, with the power on for the unit, press the
[Q] button to close the SLOPING CONSOLE.
4. After a disc is ejected, the SLOPING CONSOLE automatically returns to the tilted or
closed state. If there is any obstruction when
280-8170-00
• Never stick labels on the surface of the compact disc or mark the surface with a pencil or
pen.
• To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the center of the compact disc to the circumference.
• Do not use any solvents, such as commercially available cleaners, anti-static spray, or
thinner to clean compact discs.
• After using special compact disc cleaner, let
the compact disc dry off well before playing it.
Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.
Bitte ausbreiten und die nächste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva.
Volgende pagina uitvouwen en doorlezen a.u.b. / Cerciórese de desplegar y de leer la página siguiente.
Glöm inte att vika ut och läsa nästa sida. / Não deixe de abrir e ler a próxima página.
3
DXZ758RMC
280-8170-00
4
English
English
Main display
English
Contents
Display Items
Photo Sensor / Capteur Photosensible /
Helligkeitssensor / Sensore fotografico / Lichtsensor /
Fotosensor / Ljussensor / Sensor fotogEáfico
[PS/AS], [
]
IR-Receiver / Récepteur IR / Infrarot-Empfänger /
Ricevitore-IR / Infrarood-ontvanger /
Receptor IR / IR-mottagare / Ricevitore-IR
[TA]
[Q]
[RELEASE]
[ROTARY]
Italiano
[a] / [d]
[ADJ]
[ADF]
Nederlands Español Svenska Português
[A-M]
[SRC]
[SCN]
[RPT]
[RDM]
[P.LIST], [ERASE]
[DIRECT]
[REC]
[COLOR]
[BND]
[UP]
[DN]
With the SLOPING CONSOLE opened / Ouvrez la CONSOLE RABATTABLE
ÖFFNUNG DER SCHRÄGKONSOLE / Apertura della CONSOLE INCLINATA
Met het KANTELEND BEDIENINGSPANEEL geopend / Apertura de la CONSOLA INCLINABLE
DEN LUTANDE KONSOLEN öppen / Com a CONSOLA INCLINÁVEL aberta
• Switches to the adjust mode.
• Press and hold for 1 second or longer to
switch to the RDS mode. (radio, DAB mode
only)
Names of the Buttons and Their Functions
• Selects a station while in the radio mode or
selects a track when listening to the CD/MP3/
WMA, MC mode.
[RELEASE] button
[BND] button
• Deeply push in the button to unlock the DCP.
• Switches the band.
• Press and hold for 1 second or longer to switch
seek or manual tuning.
• Returns to a first track while in the CD/MP3/
WMA, MC mode.
• Press and hold for 1 second or longer to switch
the track type to play in the CD/MP3/WMA mode.
[PS/AS], [
] button
• Plays or pauses a CD while in the CD/MP3/
WMA, MC mode.
• Performs preset scan in the radio mode.
Press and hold for 2 seconds or longer to perform auto store.
• Confirms various settings.
• Receiver for remote control unit. (Operating
range: 30° in all directions)
Photo Sensor
• This sensor detects the brightness inside your
car. When the auto-dimmer function is set to
“AUTO”, the brightness of the display is
dimmed according to the brightness detected
by this sensor.
[TA] button
• TA (Traffic Announcement) on and off.
[Q] button
• Press to open the SLOPING CONSOLE and
insert a CD into the CD SLOT.
• Press to eject a CD loaded in the unit.
[DISP] button
• Switches the display indication (main display,
sub display, title display).
• Press and hold for 1 second or longer to
switch to the display adjust mode.
[TITLE] button
[CD SLOT]
• Switches the titles.
• Press and hold for 1 second or longer to input
or scroll the title.
[ADF] button
• Selects one of the 4 types of sound characteristics preset in memory.
[REC] button
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten.
Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.
Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken.
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
Observera: Vik ut denna sida för att kunna se figurerna över bilstereons framsida medan du läser de olika kapitlen.
Nota: Certifique-se de abrir esta página e consulte os diagramas frontais conforme realiza a leitura de cada capítulo.
5
280-8170-00
[UP], [DN] buttons
• Selects the folder. (MP3/WMA disc, MC mode
only)
[a]/[d] lever
● When the CD/DVD changer is
connected
∗ For details, see the section “CD changer
operations”. For the DVD changer, refer to
the Owner’s Manual provided with the DVD
changer.
[DIRECT] buttons
• Stores a station into memory or recalls it directly while in the radio mode.
[P.LIST], [ERASE] button
• Press and hold for 1 second or longer to turn on
or off the play list mode. (MP3/WMA disc only)
• Erases a track or folder in the MC mode.
• Press and hold for 2 seconds or longer to
switch to the ALL ERASE mode.
[RDM] button
• Performs random play while in the CD/MP3/
WMA, MC mode.
• Press and hold for 1 second or longer to perform folder random play while in the MP3/
WMA disc, MC mode.
[RPT] button
• Repeats play while in the CD/MP3/WMA, MC
mode.
• Press and hold for 1 second or longer to perform folder repeat play while in the MP3/
WMA disc, MC mode.
[SCN] button
• Performs scan play for 10 seconds of each
track while in the CD/MP3/WMA, MC mode.
• Press and hold for 1 second or longer to perform folder scan play while in the MP3/WMA
disc, MC mode.
[ROTARY] knob
• Turn to adjust the volume.
• Performs various settings.
[CD SLOT]
• CD insertion slot.
● When the TV/DAB is connected
∗ For details, see the section “TV operations” or “DAB operations”.
[TA] button
[DISP] button
• Sets the TA (Traffic Announcement) standby
mode in the DAB mode. (This function is only
DAB tuner.)
• Press and hold for 1 second or longer to turn
on or off the INFO mode. (This function is only
DAB tuner.)
• Switches the display indication (main display,
sub display, title display).
[PS/AS] button
[
] button
• Plays or pauses a CD or DVD.
• Switches the titles.
• Press and hold for 1 second or longer to input
or scroll the title.
• Performs preset scan in the TV mode.
• Press and hold for 2 seconds or longer to perform auto store in the TV mode.
• Performs service scan while in the DAB
mode.
[BND] button
[BND] button
• Advances to next disc.
• Switches the band.
• Press and hold for 1 second or longer to
switch seek or manual tuning.
[TITLE] button
[UP], [DN] buttons
• Selects the disc.
[RDM] button
• Performs random play.
• Press and hold for 1 second or longer to perform disc random play.
[RPT] button
• Performs repeat play.
• Press and hold for 1 second or longer to perform disc repeat play.
[SRC] button
• Press to turn on the power.
• Press and hold for 1 second or longer to turn
off the power.
• Switches the operation mode among the radio
mode, etc.
[SCN] button
[COLOR] button
[A-M] button
[a]/[d] lever
• Press to select display color.
• Switches to the audio mode (SUB-WOOF VOL,
ADF, BASS, TREBLE, BALANCE, FADER).
• Press and hold for 1 second or longer to turn
on or off the MAGNA BASS EXTEND.
DXZ758RMC
• This lever is used to make various settings.
• Move for 1 second or longer to switch the fastforward/fast-rewind.
Major Button Operations When External Equipment is
Connected to This Unit
• Press during CD playback, and the track currently being played back is recorded onto MC.
(TRACK REC)
• Press and hold for 2 seconds or longer during
CD playback, and all tracks are recorded onto
MC. (DISC REC)
6
DXZ758RMC
[ADJ] button
Notes:
• Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 (unfold).
• MC is the abbreviation of MUSIC CATCHER.
• ADF is the abbreviation of Anti Distortion Filter.
IR-Receiver
[DISP]
[TITLE]
Names of the Buttons and Their Functions
3. NOMENCLATURE
• Performs scan play for 10 seconds of each track.
• Press and hold for 1 second or longer to perform disc scan play.
[DIRECT] buttons
• Stores a station into memory or recalls it directly.
[ADJ] button
• Press and hold for 1 second or longer to
switch the TV picture mode or VTR (external)
picture mode.
• Press and hold 1 second or longer to switch
to the RDS mode. (radio, DAB mode only)
[a]/[d] lever
• Selects a station.
• Repeats or advances a track when listening to
a disc.
• Move for 1 second or longer to switch the
fast-forward/fast-rewind.
DXZ758RMC
280-8170-00
280-8170-00
7
English
Français Deutsch
Main unit / Appareil principal / Hauptgerät / Apparecchio principale
Hoofdtoestel / Unidad principal / Huvudenhet / Unidade principal
English
English
2.
CONTROLS / LES COMMANDES / REGLER / CONTROLLI
REGELAARS / CONTROLES / KONTROLLER / CONTROLOS
Photo Sensor / Capteur Photosensible /
Helligkeitssensor / Sensore fotografico / Lichtsensor /
Fotosensor / Ljussensor / Sensor fotogEáfico
[PS/AS], [
]
IR-Receiver / Récepteur IR / Infrarot-Empfänger /
Ricevitore-IR / Infrarood-ontvanger /
Receptor IR / IR-mottagare / Ricevitore-IR
[TA]
[Q]
[RELEASE]
[ROTARY]
Italiano
[a] / [d]
[ADJ]
[ADF]
Nederlands Español Svenska Português
[A-M]
[SRC]
[SCN]
[RPT]
[RDM]
[P.LIST], [ERASE]
[DIRECT]
[REC]
[COLOR]
[BND]
[UP]
[DN]
With the SLOPING CONSOLE opened / Ouvrez la CONSOLE RABATTABLE
ÖFFNUNG DER SCHRÄGKONSOLE / Apertura della CONSOLE INCLINATA
Met het KANTELEND BEDIENINGSPANEEL geopend / Apertura de la CONSOLA INCLINABLE
DEN LUTANDE KONSOLEN öppen / Com a CONSOLA INCLINÁVEL aberta
• Switches to the adjust mode.
• Press and hold for 1 second or longer to
switch to the RDS mode. (radio, DAB mode
only)
Names of the Buttons and Their Functions
• Selects a station while in the radio mode or
selects a track when listening to the CD/MP3/
WMA, MC mode.
[RELEASE] button
[BND] button
• Deeply push in the button to unlock the DCP.
• Switches the band.
• Press and hold for 1 second or longer to switch
seek or manual tuning.
• Returns to a first track while in the CD/MP3/
WMA, MC mode.
• Press and hold for 1 second or longer to switch
the track type to play in the CD/MP3/WMA mode.
[PS/AS], [
] button
• Plays or pauses a CD while in the CD/MP3/
WMA, MC mode.
• Performs preset scan in the radio mode.
Press and hold for 2 seconds or longer to perform auto store.
• Confirms various settings.
• Receiver for remote control unit. (Operating
range: 30° in all directions)
Photo Sensor
• This sensor detects the brightness inside your
car. When the auto-dimmer function is set to
“AUTO”, the brightness of the display is
dimmed according to the brightness detected
by this sensor.
[TA] button
• TA (Traffic Announcement) on and off.
[Q] button
• Press to open the SLOPING CONSOLE and
insert a CD into the CD SLOT.
• Press to eject a CD loaded in the unit.
[DISP] button
• Switches the display indication (main display,
sub display, title display).
• Press and hold for 1 second or longer to
switch to the display adjust mode.
[TITLE] button
[CD SLOT]
• Switches the titles.
• Press and hold for 1 second or longer to input
or scroll the title.
[ADF] button
• Selects one of the 4 types of sound characteristics preset in memory.
[REC] button
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten.
Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.
Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken.
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
Observera: Vik ut denna sida för att kunna se figurerna över bilstereons framsida medan du läser de olika kapitlen.
Nota: Certifique-se de abrir esta página e consulte os diagramas frontais conforme realiza a leitura de cada capítulo.
5
280-8170-00
[UP], [DN] buttons
• Selects the folder. (MP3/WMA disc, MC mode
only)
[a]/[d] lever
● When the CD/DVD changer is
connected
∗ For details, see the section “CD changer
operations”. For the DVD changer, refer to
the Owner’s Manual provided with the DVD
changer.
[DIRECT] buttons
• Stores a station into memory or recalls it directly while in the radio mode.
[P.LIST], [ERASE] button
• Press and hold for 1 second or longer to turn on
or off the play list mode. (MP3/WMA disc only)
• Erases a track or folder in the MC mode.
• Press and hold for 2 seconds or longer to
switch to the ALL ERASE mode.
[RDM] button
• Performs random play while in the CD/MP3/
WMA, MC mode.
• Press and hold for 1 second or longer to perform folder random play while in the MP3/
WMA disc, MC mode.
[RPT] button
• Repeats play while in the CD/MP3/WMA, MC
mode.
• Press and hold for 1 second or longer to perform folder repeat play while in the MP3/
WMA disc, MC mode.
[SCN] button
• Performs scan play for 10 seconds of each
track while in the CD/MP3/WMA, MC mode.
• Press and hold for 1 second or longer to perform folder scan play while in the MP3/WMA
disc, MC mode.
[ROTARY] knob
• Turn to adjust the volume.
• Performs various settings.
[CD SLOT]
• CD insertion slot.
● When the TV/DAB is connected
∗ For details, see the section “TV operations” or “DAB operations”.
[TA] button
[DISP] button
• Sets the TA (Traffic Announcement) standby
mode in the DAB mode. (This function is only
DAB tuner.)
• Press and hold for 1 second or longer to turn
on or off the INFO mode. (This function is only
DAB tuner.)
• Switches the display indication (main display,
sub display, title display).
[PS/AS] button
[
] button
• Plays or pauses a CD or DVD.
• Switches the titles.
• Press and hold for 1 second or longer to input
or scroll the title.
• Performs preset scan in the TV mode.
• Press and hold for 2 seconds or longer to perform auto store in the TV mode.
• Performs service scan while in the DAB
mode.
[BND] button
[BND] button
• Advances to next disc.
• Switches the band.
• Press and hold for 1 second or longer to
switch seek or manual tuning.
[TITLE] button
[UP], [DN] buttons
• Selects the disc.
[RDM] button
• Performs random play.
• Press and hold for 1 second or longer to perform disc random play.
[RPT] button
• Performs repeat play.
• Press and hold for 1 second or longer to perform disc repeat play.
[SRC] button
• Press to turn on the power.
• Press and hold for 1 second or longer to turn
off the power.
• Switches the operation mode among the radio
mode, etc.
[SCN] button
[COLOR] button
[A-M] button
[a]/[d] lever
• Press to select display color.
• Switches to the audio mode (SUB-WOOF VOL,
ADF, BASS, TREBLE, BALANCE, FADER).
• Press and hold for 1 second or longer to turn
on or off the MAGNA BASS EXTEND.
DXZ758RMC
• This lever is used to make various settings.
• Move for 1 second or longer to switch the fastforward/fast-rewind.
Major Button Operations When External Equipment is
Connected to This Unit
• Press during CD playback, and the track currently being played back is recorded onto MC.
(TRACK REC)
• Press and hold for 2 seconds or longer during
CD playback, and all tracks are recorded onto
MC. (DISC REC)
6
DXZ758RMC
[ADJ] button
Notes:
• Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 (unfold).
• MC is the abbreviation of MUSIC CATCHER.
• ADF is the abbreviation of Anti Distortion Filter.
IR-Receiver
[DISP]
[TITLE]
Names of the Buttons and Their Functions
3. NOMENCLATURE
• Performs scan play for 10 seconds of each track.
• Press and hold for 1 second or longer to perform disc scan play.
[DIRECT] buttons
• Stores a station into memory or recalls it directly.
[ADJ] button
• Press and hold for 1 second or longer to
switch the TV picture mode or VTR (external)
picture mode.
• Press and hold 1 second or longer to switch
to the RDS mode. (radio, DAB mode only)
[a]/[d] lever
• Selects a station.
• Repeats or advances a track when listening to
a disc.
• Move for 1 second or longer to switch the
fast-forward/fast-rewind.
DXZ758RMC
280-8170-00
280-8170-00
7
English
Français Deutsch
Main unit / Appareil principal / Hauptgerät / Apparecchio principale
Hoofdtoestel / Unidad principal / Huvudenhet / Unidade principal
English
English
2.
CONTROLS / LES COMMANDES / REGLER / CONTROLLI
REGELAARS / CONTROLES / KONTROLLER / CONTROLOS
Photo Sensor / Capteur Photosensible /
Helligkeitssensor / Sensore fotografico / Lichtsensor /
Fotosensor / Ljussensor / Sensor fotogEáfico
[PS/AS], [
]
IR-Receiver / Récepteur IR / Infrarot-Empfänger /
Ricevitore-IR / Infrarood-ontvanger /
Receptor IR / IR-mottagare / Ricevitore-IR
[TA]
[Q]
[RELEASE]
[ROTARY]
Italiano
[a] / [d]
[ADJ]
[ADF]
Nederlands Español Svenska Português
[A-M]
[SRC]
[SCN]
[RPT]
[RDM]
[P.LIST], [ERASE]
[DIRECT]
[REC]
[COLOR]
[BND]
[UP]
[DN]
With the SLOPING CONSOLE opened / Ouvrez la CONSOLE RABATTABLE
ÖFFNUNG DER SCHRÄGKONSOLE / Apertura della CONSOLE INCLINATA
Met het KANTELEND BEDIENINGSPANEEL geopend / Apertura de la CONSOLA INCLINABLE
DEN LUTANDE KONSOLEN öppen / Com a CONSOLA INCLINÁVEL aberta
• Switches to the adjust mode.
• Press and hold for 1 second or longer to
switch to the RDS mode. (radio, DAB mode
only)
Names of the Buttons and Their Functions
• Selects a station while in the radio mode or
selects a track when listening to the CD/MP3/
WMA, MC mode.
[RELEASE] button
[BND] button
• Deeply push in the button to unlock the DCP.
• Switches the band.
• Press and hold for 1 second or longer to switch
seek or manual tuning.
• Returns to a first track while in the CD/MP3/
WMA, MC mode.
• Press and hold for 1 second or longer to switch
the track type to play in the CD/MP3/WMA mode.
[PS/AS], [
] button
• Plays or pauses a CD while in the CD/MP3/
WMA, MC mode.
• Performs preset scan in the radio mode.
Press and hold for 2 seconds or longer to perform auto store.
• Confirms various settings.
• Receiver for remote control unit. (Operating
range: 30° in all directions)
Photo Sensor
• This sensor detects the brightness inside your
car. When the auto-dimmer function is set to
“AUTO”, the brightness of the display is
dimmed according to the brightness detected
by this sensor.
[TA] button
• TA (Traffic Announcement) on and off.
[Q] button
• Press to open the SLOPING CONSOLE and
insert a CD into the CD SLOT.
• Press to eject a CD loaded in the unit.
[DISP] button
• Switches the display indication (main display,
sub display, title display).
• Press and hold for 1 second or longer to
switch to the display adjust mode.
[TITLE] button
[CD SLOT]
• Switches the titles.
• Press and hold for 1 second or longer to input
or scroll the title.
[ADF] button
• Selects one of the 4 types of sound characteristics preset in memory.
[REC] button
Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.
Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.
Hinweis: Bitte diese Seite ausfalten und beim Lesen der einzelnen Kapitel die Frontdiagramme beachten.
Nota: Assicurarsi di aprire questa pagina e fare riferimento a questi diagrammi quando si legge ciascun capitolo.
Opmerking: Vouw deze pagina uit en zie tevens de afbeeldingen van het voorpaneel tijdens het doorlezen van de volgende hoofdstukken.
Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.
Observera: Vik ut denna sida för att kunna se figurerna över bilstereons framsida medan du läser de olika kapitlen.
Nota: Certifique-se de abrir esta página e consulte os diagramas frontais conforme realiza a leitura de cada capítulo.
5
280-8170-00
[UP], [DN] buttons
• Selects the folder. (MP3/WMA disc, MC mode
only)
[a]/[d] lever
● When the CD/DVD changer is
connected
∗ For details, see the section “CD changer
operations”. For the DVD changer, refer to
the Owner’s Manual provided with the DVD
changer.
[DIRECT] buttons
• Stores a station into memory or recalls it directly while in the radio mode.
[P.LIST], [ERASE] button
• Press and hold for 1 second or longer to turn on
or off the play list mode. (MP3/WMA disc only)
• Erases a track or folder in the MC mode.
• Press and hold for 2 seconds or longer to
switch to the ALL ERASE mode.
[RDM] button
• Performs random play while in the CD/MP3/
WMA, MC mode.
• Press and hold for 1 second or longer to perform folder random play while in the MP3/
WMA disc, MC mode.
[RPT] button
• Repeats play while in the CD/MP3/WMA, MC
mode.
• Press and hold for 1 second or longer to perform folder repeat play while in the MP3/
WMA disc, MC mode.
[SCN] button
• Performs scan play for 10 seconds of each
track while in the CD/MP3/WMA, MC mode.
• Press and hold for 1 second or longer to perform folder scan play while in the MP3/WMA
disc, MC mode.
[ROTARY] knob
• Turn to adjust the volume.
• Performs various settings.
[CD SLOT]
• CD insertion slot.
● When the TV/DAB is connected
∗ For details, see the section “TV operations” or “DAB operations”.
[TA] button
[DISP] button
• Sets the TA (Traffic Announcement) standby
mode in the DAB mode. (This function is only
DAB tuner.)
• Press and hold for 1 second or longer to turn
on or off the INFO mode. (This function is only
DAB tuner.)
• Switches the display indication (main display,
sub display, title display).
[PS/AS] button
[
] button
• Plays or pauses a CD or DVD.
• Switches the titles.
• Press and hold for 1 second or longer to input
or scroll the title.
• Performs preset scan in the TV mode.
• Press and hold for 2 seconds or longer to perform auto store in the TV mode.
• Performs service scan while in the DAB
mode.
[BND] button
[BND] button
• Advances to next disc.
• Switches the band.
• Press and hold for 1 second or longer to
switch seek or manual tuning.
[TITLE] button
[UP], [DN] buttons
• Selects the disc.
[RDM] button
• Performs random play.
• Press and hold for 1 second or longer to perform disc random play.
[RPT] button
• Performs repeat play.
• Press and hold for 1 second or longer to perform disc repeat play.
[SRC] button
• Press to turn on the power.
• Press and hold for 1 second or longer to turn
off the power.
• Switches the operation mode among the radio
mode, etc.
[SCN] button
[COLOR] button
[A-M] button
[a]/[d] lever
• Press to select display color.
• Switches to the audio mode (SUB-WOOF VOL,
ADF, BASS, TREBLE, BALANCE, FADER).
• Press and hold for 1 second or longer to turn
on or off the MAGNA BASS EXTEND.
DXZ758RMC
• This lever is used to make various settings.
• Move for 1 second or longer to switch the fastforward/fast-rewind.
Major Button Operations When External Equipment is
Connected to This Unit
• Press during CD playback, and the track currently being played back is recorded onto MC.
(TRACK REC)
• Press and hold for 2 seconds or longer during
CD playback, and all tracks are recorded onto
MC. (DISC REC)
6
DXZ758RMC
[ADJ] button
Notes:
• Be sure to read this chapter referring to the front diagrams of chapter “2. CONTROLS” on page 5 (unfold).
• MC is the abbreviation of MUSIC CATCHER.
• ADF is the abbreviation of Anti Distortion Filter.
IR-Receiver
[DISP]
[TITLE]
Names of the Buttons and Their Functions
3. NOMENCLATURE
• Performs scan play for 10 seconds of each track.
• Press and hold for 1 second or longer to perform disc scan play.
[DIRECT] buttons
• Stores a station into memory or recalls it directly.
[ADJ] button
• Press and hold for 1 second or longer to
switch the TV picture mode or VTR (external)
picture mode.
• Press and hold 1 second or longer to switch
to the RDS mode. (radio, DAB mode only)
[a]/[d] lever
• Selects a station.
• Repeats or advances a track when listening to
a disc.
• Move for 1 second or longer to switch the
fast-forward/fast-rewind.
DXZ758RMC
280-8170-00
280-8170-00
7
English
Français Deutsch
Main unit / Appareil principal / Hauptgerät / Apparecchio principale
Hoofdtoestel / Unidad principal / Huvudenhet / Unidade principal
English
English
2.
CONTROLS / LES COMMANDES / REGLER / CONTROLLI
REGELAARS / CONTROLES / KONTROLLER / CONTROLOS
Source indication
Performance information,
Operation contents indication
: Disc icon
: Play list icon
: Folder icon
: Track icon
Operation status indication,
Title indication
Clock, Mute indication
Spectrum analyzer display,
Function indication
Source icon
• You can select from 5 display patterns in the “SPE/ANA PTN” setting.
Sub icon
: Trick play indication
Level bar display
Sub display
Level bar display
Title display
1. PRECAUTIONS
Spectrum analyzer display
• You can select from 4 display
patterns in the “SPE/ANA PTN”
setting.
• You cannot change the combination of the upper and
lower title to your preference.
The user title is displayed only in the upper title, and the
lower title does not appear.
• The title display does not appear in the TV, AUX or DVD
changer mode.
Operation status indication,
Title indication
LCD Screen
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.
The screen will recover when it returns to normal temperature.
8
1. PRECAUTIONS .............................................................................................................................. 3
Sloping Console .............................................................................................................................. 3
Handling Compact Discs ................................................................................................................. 4
2. CONTROLS .................................................................................................................................... 5
3. NOMENCLATURE .......................................................................................................................... 6
Names of the Buttons and Their Functions ..................................................................................... 6
Major Button Operations When External Equipment is Connected to This Unit .............................. 7
Display Items ................................................................................................................................... 8
LCD Screen ..................................................................................................................................... 8
4. DCP ................................................................................................................................................. 9
5. REMOTE CONTROL ..................................................................................................................... 10
Inserting the Battery ...................................................................................................................... 10
Functions of the Remote Control Unit Buttons ............................................................................... 11
6. OPERATIONS ............................................................................................................................... 12
Basic Operations ........................................................................................................................... 12
Radio Operations ........................................................................................................................... 15
RDS Operations ............................................................................................................................ 16
CD/MP3/WMA Operations ............................................................................................................. 20
MUSIC CATCHER Operations ...................................................................................................... 24
Common Operations ..................................................................................................................... 26
7. OPERATIONS OF ACCESSORIES .............................................................................................. 32
CD Changer Operations ................................................................................................................ 32
TV Operations ............................................................................................................................... 34
Digital Radio/DAB Operations ....................................................................................................... 35
8. IN CASE OF DIFFICULTY ............................................................................................................ 39
9. ERROR DISPLAYS ....................................................................................................................... 40
10. SPECIFICATIONS ......................................................................................................................... 41
DXZ758RMC
1. This unit is applicable for on-road 4 wheel
vehicle purpose only. Use for tractor, fork
truck, bulldozer, off road vehicle, 2 or 3
wheel motor bicycle, marine boat or other
special purpose vehicle is not appropriate.
2. When the inside of the car is very cold and
the player is used soon after switching on the
heater moisture may form on the disc or the
optical parts of the player and proper playback may not be possible. If moisture forms
on the disc, wipe it off with a soft cloth. If
moisture forms on the optical parts of the
player, do not use the player for about one
hour. The condensation will disappear naturally allowing normal operation.
3. Driving on extremely bumpy roads which
cause severe vibration may cause the CD to
skip.
INFORMATION FOR USERS:.
CHANGES OR MODIFICATIONS TO THIS
PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY.
Sloping Console
This unit uses sloping console to make largescreen displays possible.
When you use the sloping console, be sure to
close it.
the SLOPING CONSOLE tries to close, the
safety mechanism is triggered and the
SLOPING CONSOLE returns to the open
state. If this happens, remove the obstruction, then press the [Q] button.
5. To avoid scratching the compact disc, keep
the 12 or 8 cm CD level when inserting or removing them.
Handling Compact Discs
Use only compact discs bearing the
mark.
or
Do not play heart-shaped, octagonal, or other
specially shaped compact discs.
Some CDs recorded in CD-R/CD-RW mode
may not be usable.
Handling
• Compared to ordinary music CDs, CD-R and
CD-RW discs are both easily affected by high
temperature and humidity and some of CD-R
and CD-RW discs may not be played.
Therefore, do not leave them for a long time in
the car.
• New discs may have some roughness around
the edges. If such discs are used, the player
may not work or the sound may skip. Use a
ball-point pen or the like to remove any roughness from the edge of the disc.
Ball-point pen
Roughness
CAUTION
• Never play a compact disc with any cellophane tape or other glue on it or with peeling
off marks. If you try to play such a compact
disc, you may not be able to get it back out of
the CD player or it may damage the CD
player.
• Do not use compact discs that have large
scratches, are misshapen, cracked, etc. Use
of such discs may cause misoperation or
damage.
• To remove a compact disc from its storage
case, press down on the center of the case
and lift the disc out, holding it carefully by the
edges.
• Do not use commercially available CD protection sheets or discs equipped with stabilizers,
etc. These may damage the disc or cause
breakdown of the internal mechanism.
Storage
• Do not expose compact discs to direct sunlight or any heat source.
• Do not expose compact discs to excess humidity or dust.
• Do not expose compact discs to direct heat
from heaters.
Cleaning
BE CAREFUL NOT TO GET YOUR FINGERS
CAUGHT WHEN OPENING AND CLOSING
THE SLOPING CONSOLE.
1. For safety’s sake, always close the SLOPING CONSOLE before leaving this unit unused for a prolonged period or switching
OFF the ignition key.
If you switch OFF the ignition key with the
SLOPING CONSOLE tilted, the SLOPING
CONSOLE does not close.
2. Before the SLOPING CONSOLE closes,
there may be a braking sound from the
safety mechanism. This is normal.
DXZ758RMC
280-8170-00
3. If you move the SLOPING CONSOLE by
hand, this may create play. To correct this
play, with the power on for the unit, press the
[Q] button to close the SLOPING CONSOLE.
4. After a disc is ejected, the SLOPING CONSOLE automatically returns to the tilted or
closed state. If there is any obstruction when
280-8170-00
• Never stick labels on the surface of the compact disc or mark the surface with a pencil or
pen.
• To remove fingermarks and dust, use a soft
cloth and wipe in a straight line from the center of the compact disc to the circumference.
• Do not use any solvents, such as commercially available cleaners, anti-static spray, or
thinner to clean compact discs.
• After using special compact disc cleaner, let
the compact disc dry off well before playing it.
Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.
Bitte ausbreiten und die nächste Seite lesen. / Assicurarsi di aprire e leggere la pagina successiva.
Volgende pagina uitvouwen en doorlezen a.u.b. / Cerciórese de desplegar y de leer la página siguiente.
Glöm inte att vika ut och läsa nästa sida. / Não deixe de abrir e ler a próxima página.
3
DXZ758RMC
280-8170-00
4
English
English
Main display
English
Contents
Display Items
The control panel can be detached to deter
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
Attaching the DCP
1. Insert the DCP so that the A section on the
right side of the DCP catches on the hook B
on the unit.
Removing the DCP
1. With the SLOPING CONSOLE closed, turn
off the power.
2. Press the [RELEASE] button deeply to open
the DCP.
[RELEASE] button
2. Press the left side C of the DCP carefully to
fit it in place.
3. Pull the DCP toward you and remove it.
CAUTION
DCP
CAUTION
• Always close the SLOPING CONSOLE before removing the DCP.
• If you remove the DCP with the SLOPING
CONSOLE open, the sloping console
closes immediately. Be careful not to get
your fingers caught.
• The DCP can easily be damaged by
shocks. After removing it, be careful not to
drop it or subject it to strong shocks.
• If the [RELEASE] button is pressed and the
DCP is not locked into place, it may fall out
from vibration of the car. This can break
the DCP, so after removing it, either install
it on the unit or put it in its DCP case.
• The connector connecting the unit and the
DCP is an extremely important part. Be
careful not to damage it by pressing on it
with fingernails, screwdrivers, etc.
Note:
• If the DCP is dirty, wipe off the dirt with a soft, dry
cloth only.
DXZ758RMC
280-8170-00
9
English
4. DCP
English
5. REMOTE CONTROL
Receiver for remote control unit
Operating range: 30˚ in all directions
Signal transmitter
Remote control unit
[SRC]
[ ], [ ]
[MUTE]
[TA]
[PS/AS]
[BND]
[
]
[a], [d]
[DISP]
[PTY]
[AF]
Inserting the Battery
1 Turn over the remote control unit and slide the cover in
the direction indicated by the arrow in the illustration.
2 Insert the battery (CR2025) into the insertion guides,
with the printed side (+) facing upwards.
3 Press the battery in the direction indicated by the
arrow so that it slides into the compartment.
4 Replace the cover and slide in until it clicks into place.
10
Insertion guide
CR202
5
Notes:
Misuse may result in rupture of the battery, producing
leakage of fluid and resulting in personal injury or
damage to surrounding materials. Always follow these
safety precautions:
• Use only the designated battery .
• When replacing the battery, insert properly, with +/polarities oriented correctly.
• Do not subject battery to heat, or dispose of in fire or
water. Do not attempt to disassemble the battery.
• Dispose of used batteries properly.
1
DXZ758RMC
280-8170-00
Mode
Radio (RDS) /DAB
Button
CD/MP3/WMA/
M.CATCHER
CD changer
DVD changer
English
Functions of the Remote Control Unit Buttons
TV
[SRC]
Switches among radio, DAB, CD/MP3/WMA, MC, CD changer, DVD changer, TV and AUX.
Press to cancel a traffic announcement broadcast, an emergency broadcast, and a PTY
broadcast during a TA, ALARM or PTY interrupt (except in the TV mode).
[BND]
Switches reception
band.
Returns to the first
track.
Moves the next disc
in increasing order.
Switches reception
band.
[
],[
]
Increases and decreases volume (in all modes).
[
],[
]
Moves preset
channels up and
down.
Moves tracks up and down.
When pressed and held for 1 second or
longer:
Fast-forward/fast-rewind.
Moves preset
channels up and
down.
No function.
Switches between playback and pause.
No function.
[
]
[MUTE]
[TA]
[DISP]
Turns mute on and off.
TA on and off.
Press to cancel a traffic announcement broadcast during a TA interrupt. No function.
Switches among main display, sub display and title display.
When pressed and held for 1 second or longer: Switches the titles (except in the DVD
changer, TV mode).
[PS/AS]
Preset scan.
When pressed and
held for 2 seconds or
longer:
Auto store.
Scan play.
When pressed and
held for 1 second or
longer:
Folder scan play
(MP3/WMA disc, MC
mode).
Scan play.
When pressed and
held for 1 second or
longer: Disc scan
play.
Preset scan.
When pressed and
held for 2 seconds or
longer: Auto store.
[AF]
AF function on and
off.
When pressed and
held for 1 second or
longer:
REG function on and
off
Repeat play.
When pressed and
held for 1 second or
longer:
Folder repeat play
(MP3/WMA disc, MC
mode).
Repeat play.
When pressed and
held for 1 second or
longer: Disc repeat
play.
No function.
Press to cancel an emergency broadcast during an ALARM interrupt.
[PTY]
PTY mode on and
off.
Random play.
When pressed and
held for 1 second or
longer:
Folder random play
(MP3/WMA disc, MC
mode).
Random play.
When pressed and
held for 1 second or
longer: Disc random
play.
Press to cancel a PTY broadcast during a PTY interrupt.
No function.
Switches between TV
and VTR.
No function.
∗ Some of the corresponding buttons on the main unit and remote control unit have different functions.
DXZ758RMC
11
280-8170-00
English
6. OPERATIONS
Basic Operations
Note:Be sure to read this chapter referring to the front diagrams of
chapter “2. CONTROLS” on page 5 (unfold).
CAUTION
Be sure to lower the volume before switching off the unit power or the ignition key. The
unit remembers its last volume setting. If
you switch the power off with the volume up,
when you switch the power back on, the
sudden loud volume may hurt your hearing
and damage the unit.
Turning on/off the power
Note:
• Be careful about using this unit for a long time without
running the engine. If you drain the car’s battery too
far, you may not be able to start the engine and this
can reduce the service life of the battery.
1. Press the [SRC] button.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
3. Press and hold the [SRC] button for 1 second
or longer to turn off the power for the unit.
Note:
• System check
During the initial power up of this unit, it will go
through a system check procedure. This procedure verifies any devices connected through
CeNET. Any additional CeNET devices plugged
into the unit after the initial power up will initiate
the system check procedure. When the power is
turned on, “SYSTEM CHECK” appears in the display if the wire connections were modified. The
system check starts automatically within the unit.
Selecting a mode
1. Press the [SRC] button to change the operation mode.
2. Each time you press the [SRC] button, the operation mode changes in the following order:
Radio mode ➜ DAB mode ➜ CD/MP3/
WMA mode ➜ M.CATCHER mode ➜ CD
changer mode ➜ DVD changer mode ➜
TV mode ➜ AUX mode ➜ Radio mode...
∗ External equipment not connected through
CeNET will not be displayed.
Adjusting the volume
1. Press the front part of the [ROTARY] knob.
The knob will pop up.
12
2. Turn the [ROTARY] knob to adjust the volume.
∗ The volume level is from 0 (minimum) to 33
(maximum).
Switching the display
● When the power is turned on
1. Each time you press the [DISP] button, the
display switches in the following order:
Main display ➜ Sub display ➜ Title display ➜ Main display ...
∗ Once selected, the preferred display becomes
the display default. When a function adjustment such as volume is made, the screen will
momentarily switch to that function’s display,
then revert back to the preferred display several seconds after the adjustment.
∗ When you have entered a title in a CD/MP3/
WMA, it appears in the display. If you have not
entered a title, “NO TITLE” appears in the display. For information on how to enter a title,
refer to the subsection “Entering titles” in the
section “Common Operations”.
CT (Clock Time) function
The CT function receives CT data sent from an
RDS station and displays the time.
∗ If a CT data is not being received, “––:––CT” appears in the display.
Note:
• CT data is not transmitted in some countries and
by some broadcast stations. Also, in some areas,
the CT may not display accurately.
Setting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust
the low frequencies like the normal sound adjustment function, but emphasizes the deep
bass frequencies area to provide you with a dynamic sound.
∗ The factory default setting is “OFF”.
1. Press and hold the [A-M] button for 1 second
or longer to turn on the MAGNA BASS EXTEND effect. “M-BASS EX ON” appears on
the display.
2. Press and hold the [A-M] button for 1 second
or longer to turn off the MAGNA BASS EXTEND effect. “M-BASS EX OFF” appears on
the display.
DXZ758RMC
280-8170-00
Basic Operations
Setting the Anti Distortion Filter
The adopted “Liveliness Enhancement Filter” and
“Sound Tone Compensation” functions allow wellmodulated realistic playback without affecting the
characteristics of the original sound tone.
This unit are provided with 4 types of sound tone effects stored in memory. Select the one you prefer.
∗ The factory default setting is “ADF OFF”.
Each time you press the [ADF] button, the tone
effect changes in the following order:
“ADF 1” ➜ “ADF 2” ➜ “ADF 3” ➜ “ADF
USER” ➜ “ADF OFF” ➜ “ADF 1” ...
• ADF 1
: suitable for the genuine speakers
• ADF 2
: suitable for separate speakers
• ADF 3
: suitable for coaxial speakers
• ADF USER: this setting can be adjusted by
the user to his or her individual
preference.
• ADF OFF : no sound effect
Notes:
• The volume changes each time the ADF (Anti Distortion Filter) setting is switched. Turn down the
volume and the sub-woofer volume before performing a switching operation.
• Sufficient effects cannot be obtained with some
speaker systems. In such cases, adjust the volume.
Adjusting the tone
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:
● When “ADF 1, 2, 3” is set
“SUB-WOOF VOL” ➜ “BALANCE” ➜
“FADER” ➜ Last function mode...
● When “ADF USER” is set
“SUB-WOOF VOL” ➜ “ADF GAIN” ➜
“BALANCE” ➜ “FADER” ➜
Last function mode...
● When “ADF OFF” is set
“SUB-WOOF VOL” ➜ “BASS GAIN” ➜
“TREBLE GAIN” ➜ "BALANCE” ➜
“FADER” ➜ Last function mode...
Notes:
• As subwoofer is effective, “SUB-WOOF VOL” can
be selected.
• The display automatically returns to the previous
mode.
Adjusting the subwoofer
∗ The factory default setting is “0”
∗ This function can be adjusted only when the subwoofer
output is set to “ON”. For details on how to set the
subwoofer, refer to the subsection “Setting the
subwoofer” in the section “Common Operations”.
1. Press the [A-M] button to select “SUBWOOF VOL”.
2. Turn the [ROTARY] knob to select from –6 to
+6.
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the ADF effects (Gain,
Filter)
This adjustment can only be performed when the
ADF (Anti Distortion Filter) is set to “ADF USER”.
1. Press the [A-M] button and select “ADF GAIN”.
2. Turn the [ROTARY] knob to adjust the gain.
∗ The factory default setting is "1". (Adjustment
range: 1 to 4)
∗ “ADF GAIN” adjusts the filter effect.
3. Move the [a]/[d] lever to select “ADF FILTER”.
Turn the [ROTARY] knob to select the filter.
∗ The factory default setting is “MID”. (Adjustment LOW/MID/HIGH)
• LOW : attenuates high frequencies.
• MID : attenuates low and high frequencies evenly.
• HIGH : attenuates low frequencies.
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
DXZ758RMC
13
280-8170-00
English
Note:
• When “ADF 1”, “ADF 2”, “ADF 3” or “ADF USER”
is selected for ADF (Anti Distortion Filter), setting
of MAGNA BASS EX cannot be performed.
Basic Operations
English
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can only be performed when
the ADF (Anti Distortion Filter) is set to “ADF
OFF”.
1. Press the [A-M] button and select “BASS
GAIN”.
2. Turn the [ROTARY] knob to adjust the bass.
∗ The factory default setting is “0”. (Adjustment
range: –6 to +8)
3. Move the [a]/[d] lever to select “BASS
FREQ”.
Turn the [ROTARY] knob to select the frequency.
∗ The factory default setting is “50”. (Adjustment
50/80/120 Hz)
4. Move the [a]/[d] lever to select “BASS Q”.
Turn the [ROTARY] knob to select the Qcurve.
∗ The factory default setting is “1”. (Adjustment
1/1.25/1.5/2)
Adjusting the balance
1. Press the [A-M] button and select “BALANCE”.
2. Turn the [ROTARY] knob to adjust the balance of the left and right speakers.
∗ The factory default setting is “0”. (Adjustment
range: L13 to R13)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the fader
1. Press the [A-M] button and select “FADER”.
2. Turn the [ROTARY] knob to adjust the balance of the front and rear speakers.
∗ The factory default setting is “0”. (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
5. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the treble (Gain,
Frequency)
This adjustment can only be performed when
the ADF (Anti Distortion Filter) is set to “ADF
OFF”.
1. Press the [A-M] button and select “TREBLE
GAIN”.
2. Turn the [ROTARY] knob to adjust the treble.
∗ The factory default setting is “0”. (Adjustment
range: –6 to +6)
3. Move the [a]/[d] lever to select
“TREBLE FREQ”.
Turn the [ROTARY] knob to select the frequency.
∗ The factory default setting is “12k”. (Adjustment 8 kHz/12 kHz)
4. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
14
DXZ758RMC
280-8170-00
Radio Operations
Manual tuning
1. Press the [SRC] button and select the radio
mode. The frequency or PS appears in the
display.
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the frequency changes one step at a time. In the quick
tuning mode, you can quickly tune the desired
frequency.
1. Press the [BND] button and select the desired band (FM or AM (MW/LW)).
∗ PS: Programme service name
2. Press the [BND] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜
FM1...
3. Move the [a]/[d] lever to tune in the desired station.
Tuning
There are 3 types of tuning modes available,
seek, manual and preset tuning.
Seek tuning
1. Press the [BND] button and select the desired band (FM or AM (MW, LW)).
2. Tune into a station.
∗ If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek tuning is now available.
∗ If “TA” is lit in the display, TP stations are automatically sought.
● DX SEEK
Move the [a]/[d] lever to automatically seek a
station.
When the lever is moved up, the station is
sought in the direction of higher frequencies; if
the lever is moved down, the station is sought in
the direction of lower frequencies.
∗ When seek tuning starts, “DX SEEK” appears in
the display.
● LOCAL SEEK
If you move the [a]/[d] lever for 1 second or
longer, local seek tuning is carried out. Broadcast stations with good reception sensitivity are
selected.
∗ If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer.
“MANU” is lit in the display and manual tuning
is now available.
2. Tune into a station.
●Quick tuning:
Move the [a]/[d] lever for 1 second or
longer to tune in a station.
●Step tuning:
Move the [a]/[d] lever to manually tune in
a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6FM3, 6-AM) exists to store individual radio stations in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio frequency automatically.
1. Press the [BND] button and select the desired band (FM or AM (MW/LW)).
2. Press the corresponding [DIRECT] button to
recall the stored station.
∗ Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store that station
into preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
∗ When local seeking starts, “LO SEEK” appears in
the display.
DXZ758RMC
15
280-8170-00
English
Listening to the radio
English
Radio Operations
RDS Operations
Auto store
RDS (Radio Data System)
Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received,
a previously stored station remains
unoverwritten at the memory position.
1. Press the [BND] button and select the desired band (FM or AM (MW/LW)).
2. Press and hold the [PS/AS] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset
channels.
This unit has a built-in RDS decoder system that
supports broadcast stations transmitting RDS data.
This system can display the name of the broadcast
station being received (PS) and can automatically
switch to the broadcast station with the best reception as you move long distances (AF switching).
Also, if a traffic announcement or programme
type is broadcast from an RDS station, no matter
what mode you are in, this broadcast is received.
Additionally, if EON information is received, this
information enables automatic switching of other
preset stations on the same network and interruption of the station being received with traffic
information from other stations (TP). This function is not available in some areas.
When using the RDS function, always set the
radio to FM mode.
• AF
: Alternative Frequency
• PS
: Programme Service Name
• PTY
: Programme Type
• EON
: Enhanced Other Network
• TP
: Traffic Programme
∗ If auto store is performed in the FM bands, the
stations are stored in FM3 even if FM1 or FM2
was chosen for storing stations.
Preset scan
Preset scan receives the stations stored in preset memory in order. This function is useful
when searching for a desired station in memory.
1. Press the [PS/AS] button.
2. When a desired station is tuned in, press the
[PS/AS] button again to continue receiving
that station.
Note:
• Be careful not to press and hold the [PS/AS] button for 2 seconds or longer, otherwise the auto
store function is engaged and the unit starts storing stations.
∗ RDS interrupt does not function during AM radio
reception.
∗ When set receives RDS signal, and can read PS
data, PS appears in the display.
Switching the display
This allows switching of the indication during
RDS reception.
1. Each time you press the [TITLE] button, the
display changes in the following order:
PTY
PS-NAME
AF function
The AF function switches to a different frequency on the same network in order to maintain optimum reception.
∗ The factory default setting is “ON”.
1. Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS mode.
2. Move the [a]/[d] lever to select “AF”.
3. Turn the [ROTARY] knob to select “ON” or
“OFF”.
● ON:
“AF” is lit in the display and the AF function
turns on.
● OFF:
“AF” goes off in the display and the AF function turns off.
16
DXZ758RMC
280-8170-00
RDS Operations
∗ If the reception of the current broadcast station deteriorates, “PI SEARCH” appears in the display and
the radio searches for the same programme on
another frequency.
● AF function between RDS and DAB
When the same programme is broadcasted by
both RDS and DAB, and this function is ON, the
unit switches to receive the broadcast with the
better reception automatically.
∗ This function only operates when the DAH923 or
DAH913 DAB unit, sold separately, is connected.
∗ This factory default setting is “ON”.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [a]/[d] lever to select “LINK ACT”.
3. Turn the [ROTARY] knob to select “ON” or
“OFF”.
● ON:
AF switching between DAB and RDS enabled.
● OFF:
AF switching between DAB and RDS disabled.
4. Press the [ADJ] button to return to the previous mode.
REG (Regional programme) function
When the REG function is ON, the optimum regional station can be received. When this function is
OFF, if the regional station area switches as you
drive, a regional station for that region is received.
∗ The factory default setting is “OFF”.
Notes:
• This function is disabled when a national station
such as BBC R2 is being received.
• The REG function ON/OFF setting is valid when
the AF function is ON.
1. Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS mode.
2. Move the [a]/[d] lever to select “REG”.
3. Turn the [ROTARY] knob to select “ON” or
“OFF”.
● ON:
“REG” is lit in the display and the REG function turns on.
● OFF:
“REG” goes off in the display and the REG
function turns off.
4. Press the [ADJ] button to return to the previous mode.
Manually tuning a regional station
in the same network
1. This function is valid when the AF function is
ON and the REG function is OFF.
Note:
• This function can be used when a regional broadcast of the same network is received.
2. Press any one of the [DIRECT] buttons to
call out the regional station.
3. If the reception condition of the called out
station is bad, press the [DIRECT] button of
the same number. The unit receives a local
station on the same network.
TA (Traffic Announcement)
In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement
broadcast is received as top priority regardless of
the function mode so you can listen to it. Traffic
programme (TP) automatic tuning is also possible.
∗ This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
●Setting the TA standby mode
If you press the [TA] button when only “TP” is lit
in the display, “TP” and “TA” light in the display
and the unit is set into the TA standby mode until a traffic announcement is broadcast. When a
traffic announcement broadcast starts, “TRA
INFO” appears in the display. If you press the
[TA] button while a traffic announcement broadcast is being received, the traffic announcement
broadcast reception is cancelled and the unit
goes into the TA standby mode.
●Cancelling the TA standby mode
As “TP” and “TA” lit in the display, press the [TA]
button or [SRC] button . The “TA” in the display
goes off and the TA standby mode is cancelled.
∗ If “TP” is not lit, pressing the [TA] button searches
for a TP station.
●Searching for a TP station
When “TP” is not lit, if you press the [TA] button,
“TA” in the display lights and the unit automatically receives a TP station.
Note:
• If a TP station is not received, the unit continues
the search operation. Pressing [TA] button again
goes off “TA” in the display and stops TP station
searching.
DXZ758RMC
17
280-8170-00
English
4. Press the [ADJ] button to return to the previous mode.
RDS Operations
English
Auto store function for TP stations
Selecting PTY
You can automatically store up to 6 TP stations into
preset memory. If the number of TP can be received
less than 6, broadcast stations already stored in
memory and left without being overwritten.
As “TA” lit in the display, press and hold the [PS/
AS] button for 2 seconds or longer. The TP stations with the good reception sensitivity are
stored into preset memory.
1. Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS mode.
2. Move the [a]/[d] lever to select “PTY SELECT”.
∗ Even if you select FM1 or FM2, a TP station is stored
into memory for FM3.
PTY
This function enables you to listen to a broadcast of the selected programme type even if the
unit is on a function mode other than radio.
∗The factory default setting is “OFF“.
∗ Some countries do not yet have PTY broadcast.
∗ In the TA standby mode, a TP station has priority
over a PTY broadcast station.
●Setting/Cancelling the PTY standby mode
1. Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS mode.
2. Move the [a]/[d] lever to select “PTY”.
3. Turn the [ROTARY] knob to select “ON” or
“OFF”.
∗ You cannot select “ON” or “OFF” during a TA,
ALARM or PTY interrupt.
● ON:
“PTY” is lit in the display and the PTY
standby mode turns on.
● OFF:
“PTY” goes off in the display and the PTY
standby mode turns off.
4. Press the [ADJ] button to return to the previous mode.
●Cancelling a PTY interrupt broadcast
Press the [TA] button or [SRC] button during the
PTY broadcast, the PTY interrupt is cancelled
and the unit returns to PTY standby mode.
∗ You cannot select “PTY SELECT” during a TA,
ALARM or PTY interrupt.
3. Press the [
] button to go to the PTY select mode.
4. Press any one of the [DIRECT] buttons. Alternatively, Turning the [ROTARY] knob to
select the desired PTY.
∗ Below are the factory default settings stored
for the [DIRECT] buttons.
Preset
number
PTY item
ENGLISH
Contents
1
News
News
2
Info
Information
3
Pop M
Pop Music
4
Sport
Sport
5
Classics
Serious Classical Music
6
Easy M
Easy Listening Music
5. The PTY select mode is cancelled automatically and returns to the RDS mode 7 seconds after a PTY is selected.
PTY seek
1. Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS mode.
2. Move the [a]/[d] lever to select “PTY SELECT”.
3. Press the [
] button to go to the PTY select mode.
4. Select PTY.
5. Move the [a]/[d] lever. If you move the lever up, the unit seeks a PTY broadcast moving up the frequencies; if you move the lever
down, it seeks moving down the frequencies.
∗ If no station with the selected PTY broadcast
can be received, the unit returns to the previous mode.
18
DXZ758RMC
280-8170-00
RDS Operations
English
PTY preset memory
1. Press and hold the [ADJ] button for 1 second
or longer to switch to the RDS mode.
2. Move the [a]/[d] lever to select “PTY SELECT”.
3. Press the [
] button to go to the PTY select mode.
4. Turn the [ROTARY] knob to select the desired PTY.
The 29 types of PTY below can be selected.
5. If you press and hold any one of the
[DIRECT] buttons for 2 seconds or longer,
the selected PTY is stored into that preset
channel memory.
PTY item
ENGLISH
DEUTSCH
SVENSKA
FRANCAIS
Contents
News
Nachrich
Nyheter
Infos
News
Affairs
Aktuell
Aktuellt
Magazine
Today’s events
Info
Service
Info
Services
Information
Sport
Sport
Sport
Sport
Sports
Educate
Bildung
Utbildn
Educatif
Education
Drama
Hör + Lit
Teater
Fiction
Drama
Culture
Kultur
Kultur
Culture
Culture
Science
Wissen
Vetenskp
Sciences
Science
Varied
Unterh
Underh
Divers
Variety
Pop M
Pop
Pop
M Pop
Pop music
Rock M
Rock
Rock
M Rock
Rock music
Easy M
U-Musik
Lättlyss
Chansons
Easy music
Light M
L-Musik
L klass
M Cl Lég
Light music
Classics
E-Musik
Klassisk
Classiq
Classics
Other M
- - Musik
Övrig m
Autre M
Other music
Weather
Wetter
Väder
Météo
Weather
Finance
Wirtsch
Ekonomi
Economie
Finance
Children
Kinder
För barn
Enfants
For children
Social
Soziales
Socialt
Société
Social
Religion
Religion
Andligt
Religion
Religion
Phone In
Anruf
Telefon
Forum
Phone in
Travel
Reise
Resor
Voyages
Travel
Leisure
Freizeit
Fritid
Loisirs
Leisure
Jazz
Jazz
Jazz
Jazz
Jazz
Country
Country
Country
Country
Country
Nation M
Landes M
Nation m
Ch pays
Nation music
Oldies
Oldies
Oldies
Rétro
Oldies
Folk M
Folklore
Folkm
Folklore
Folk music
Document
Feature
Dokument
Document
Documentaries
DXZ758RMC
19
280-8170-00
English
RDS oprations
CD/MP3/WMA Operations
Emergency broadcast
MP3/WMA
If an emergency broadcast is received, all the
function mode operations are stopped.
“ALARM” appears in the display and the emergency broadcast can be heard.
●Cancelling an emergency broadcast
If you press the [TA] button or [SRC] button ,
emergency broadcast reception is cancelled.
What is MP3?
Switching the PTY display language
You can select one of 4 languages (English,
German, Swedish or French) for the PTY displayed in the display.
∗ The factory default setting is “ENGLISH”.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [a]/[d] lever to select “LANGUAGE”.
3. Turn the [ROTARY] knob to select the desired language.
4. Press the [ADJ] button to return to the previous mode.
Volume setting of TA, emergency
broadcast (ALARM) and PTY
The volume for TA, ALARM and PTY interrupts
can be set during TA, ALARM or PTY interrupt.
∗ The factory default setting is “15”.
During a TA, ALARM or PTY interrupt, turn the [ROTARY] knob to set the volume to the desired level (0
to 33).
∗ When the TA, ALARM or PTY interrupt ends, the
volume returns to the level it had before the interrupt.
MP3 is an audio compression method and classified into audio layer 3 of MPEG standards.
This audio compression method has penetrated
into PC users and become a standard format.
This MP3 features the original audio data compression to about 10 percent of its initial size
with a high sound quality. This means about 10
music CDs can be recorded on a CD-R disc or
CD-RW disc to allow a long listening time without having to change CDs.
What is WMA?
WMA is the abbreviation of Windows Media Audio, an audio file format developed by Microsoft
Corporation.
Notes:
• If you play a file with DRM (Digital Rights Management) for WMA remaining ON, no audio is
output. (The DRM indicator blinks.)
• Windows Media™, and the Windows ® logo are
trademarks, or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
● To disable DRM (Digital Rights Management):
1. When using Windows Media Player 8, click
on TOOLS ➜ OPTIONS ➜ COPY MUSIC
tab, then under COPY SETTINGS, unclick
the check box for PROTECT CONTENT.
Then, reconstruct files.
2. When using Windows Media Player 9, click
on TOOL ➜ OPTIONS ➜ MUSIC RECORD
tab, then under Recording settings, unclick
the Check box for RECORD PROTECTED
MUSIC. Then, reconstruct files.
Personally constructed WMA files are used
at your own responsibility.
Precautions when creating MP3/WMA disc
● Usable sampling rates and bit rates:
1. MP3: Sampling rate 11.025 kHz-48 kHz,
Bit rate: 8 kbps-320 kbps / VBR
2. WMA: Bit rate 48 kbps-192 kbps
● File extensions
1. Always add a file extension “.MP3” or
“.WMA” to MP3 or WMA file by using single
byte letters. If you add a file extension other
than specified or forget to add the file extension , the file cannot be played.
20
DXZ758RMC
280-8170-00
CD/MP3/WMA Operations
Multisession function
When a disc contains both normal CD type tracks
and MP3/WMA type tracks mixedly, you can select which type of the recorded tracks to play.
● Default value is “CD”.
Each time you press and hold the [BND] button
for 1 second or longer, the mixed mode is
switched between CD type or MP3/WMA type.
1. Types of recording that can be played are as
follows.
Disc
Setting Set to CD
Set to MP3/WMA
Mixed with CD and
Play CD
Play MP3/WMA
MP3/WMA type tracks
CD type track only Play CD
Play CD
MP3/WMA type track only Play MP3/WMA Play MP3/WMA
Note:
• When playing a CCCD (Copy Control CD), set the
setting to CD type. When this is set to MP3/WWA
type, the CD cannot be played normally in some
cases.
Loading a CD
1. Press the [Q] button. The SLOPING
CONSOLE opens.
2. Insert a CD into the center of the CD SLOT
with the label side facing up. The CD plays
automatically after loading.
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD does not insert easily, there may be another
CD in the mechanism or the unit may require service.
• Discs not bearing the
or
mark and
CD-ROMs cannot be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
Loading 8 cm compact discs
∗ No adapter is required to play an 8 cm CD.
∗ Insert the 8 cm CD into the center of the insertion slot.
Backup Eject function
Pressing the [Q] button ejects the disc even if
the power to the unit was not turned on.
1. Press the [Q] button. Remove the disc after
it is ejected.
Note:
• Always close the sloping console after opening it
or ejecting the CD.
CAUTION
• Be careful not to catch your hand or fingers while closing the SLOPING CONSOLE.
• Do not try to put your hand or fingers in
the disc insertion slot. Also never insert
foreign objects into the slot.
• Do not insert discs where adhesive comes
out from cellophane tape or a rental CD label, or discs with marks where cellophane
tape or rental CD labels were removed. It
may be impossible to extract these discs
from the unit and they may cause the unit
to break down.
2. After making these settings, remove the disc
and then reinsert it.
3. When a mixed mode CD is loaded and CD is
set, the track to be played first is MP3/WMA
file data and no sound is heard.
DXZ758RMC
21
280-8170-00
English
2. Files without MP3/WMA data will not play.
The indication “––:––” appears in the play
time display if you attempt to play files without MP3/WMA data.
● Logical format (File system)
1. When writing MP3/WMA file on a CD-R disc
or CD-RW disc, please select “ISO9660 level
1, 2 or JOLIET or Romeo” as the writing software format. Normal play may not be possible
if the disc is recorded on another format.
2. The folder name and file name can be displayed as the title during MP3/WMA play but
the title must be within 128 single byte alphabetical letters and numerals (including an extension).
3. Do not affix a name to a file inside a folder
having the same name.
● Folder structure
1. A disc with a folder having more than 8 hierarchical levels will be impossible.
● Number of files or folders
1. Up to 255 files can be recognized per folder.
Up to 500 files can be played.
2. Tracks are played in the order that they were recorded onto a disc. (Tracks might not always be
played in the order displayed on the PC.)
3. Some noise may occur depending on the type
of encoder software used while recording.
CD/MP3/WMA Operations
English
Listening to a disc already loaded
in the unit
Press the [SRC] button to select the CD/MP3/
WMA mode.
When the unit enters the CD/MP3/WMA mode,
play starts automatically.
If there is no disc loaded, the indication “NO
DISC” appears in the display.
Pausing play
1. Press the [
] button to pause play.
“PAUSE” appears in the display.
2. To resume CD play, press the [
] button
again.
Displaying CD titles
This unit can display title data for CD-text/MP3/
WMA disc and user titles input with this unit.
1. Each time you press the [TITLE] button, the
title changes in the following order:
●CD-TEXT disc
User title (disc) ➜ CD-text title (disc) ➜
Artist name ➜ CD-text title (track) ➜ User
title (disc)...
●MP3/WMA disc
Folder ➜ Track ➜ Album ➜ Artist ➜ Title
➜ Folder...
●M.CATCHER
Folder
Track
Notes:
• If the CD playing is not a CD-text CD or no user title
has been input, “NO TITLE” appears in the display.
• If MP3/WMA disc is not input TAG, “NO TITLE”
appears in the display.
• For MP3, supports ID3 Tags V2.3 / 2.2 / 1.1 / 1.0.
• Tag displays give priority to V2.3 / 2.2.
• In the case of album Tags for WMA, the information written into the extension header is displayed.
• Only ASCII characters can be displayed in Tags.
Fast-forward/fast-rewind
● Fast-forward
Move the [a]/[d] lever up for 1 second or
longer.
● Fast-rewind
Move the [a]/[d] lever down for 1 second or
longer.
∗ For MP3/WMA disc, it takes some time until the start
of searching and between tracks. In addition, the
playing time may have a margin of error.
Folder select
This function allows you to select a folder containing MP3/WMA files and start playing from
the first track in the folder.
1. Press the [DN] button to move to the previous folder.
Press the [UP] button to move to the next
folder.
∗ Press the [UP] button while in the final folder
to shift to the first folder.
∗ Folder without an MP3/WMA file is not selectable.
Top function
The top function resets the CD player to the first
track of the disc. Press the [BND] button to play
the first track (track No. 1) on the disc.
∗ In case of MP3/WMA, the first track of a folder being played will be returned.
Scan play
This function allows you to locate and play the
first 10 seconds of all the tracks recorded on a
disc.
1. Press the [SCN] button to perform scan play.
∗ Scan play starts from the next track after the
track currently being played.
2. To cancel scan play, press the [SCN] button
again.
Selecting a track
●Track-up
1. Move the [a]/[d] lever up to move ahead
to the beginning of the next track.
2. Each time you move the lever up, the track advances ahead to the beginning of the next track.
●Track-down
1. Move the [a]/[d] lever down to move back
to the beginning of the current track.
2. Move the lever down twice to move to the
beginning of the previous track.
22
Folder scan play
This function allows you to locate and play the
first 10 seconds of the first track of all the folders on an MP3/WMA disc.
1. Press and hold the [SCN] button for 1 second or longer to perform to folder scan play.
∗ Folder scan play starts from the next track after the track currently being played.
2. To cancel folder scan play, press the [SCN]
button again.
DXZ758RMC
280-8170-00
CD/MP3/WMA Operations
Play list mode
This function allows you to play the current track
repeatedly.
1. Press the [RPT] button to perform repeat
play.
2. To cancel repeat play, press the [RPT] button
again.
This function allows you to play tracks, up to latest 5 time stamps, by reading the play list information written on the disc.
1. Press and hold the [P.LIST] button for 1 second or longer to turn on or off the play list
mode.
Folder repeat play
This function allows you to play a track currently
being played in the MP3/WMA folder repeatedly.
1. Press and hold the [RPT] button for 1 second
or longer to perform folder repeat play.
2. To cancel folder repeat play, press the [RPT]
button again.
Random play
This function allows you to play all tracks recorded on a disc in a random order.
1. Press the [RDM] button to perform random
play.
2. To cancel random play, press the [RDM] button again.
Folder random play
This function allows you to play all the tracks of
all the folders recorded on an MP3/WMA disc in
a random order.
1. Press and hold the [RDM] button for 1 second or longer to perform folder random play.
2. To cancel folder random play, press the
[RDM] button again.
∗ Play list play is possible only when there is a
file whose extension is “.M3U” on the CD-R/
RW.
∗ Up to 5 play lists can be recognized, and up to
255 files can be recognized per play list.
2. Press the [DN] button to move to the previous play list.
Press the [UP] button to move to the next
play list.
Notes:
• The SCN/RPT/RDM functions cannot be used
while in the play list mode.
• The title changes from folder name to play list
name.
Making a play list
1. Write desired tracks to a CD-R/RW, etc. Be
sure to use alphanumeric/ASCII characters
for all file names.
2. Make a play list by using a multimedia
player, etc. and save the data. The file format
must be M3U.
3. Again, write this play list to the CD-R/RW,
etc.
Notes:
• When writing to a CD-R/RW, etc., be sure to use
alphanumeric/ASCII characters.
• Up to 5 layers can be recognized as a list. For
written play lists, latest 5 lists are recognized in
the order in which they are written.
• When writing to a CD-R/RW, etc., turn off the Disc
At Once function.
• When adding a play list, it is recommended to
write it in the “Root” folder.
MUSIC CATCHER
In the M.CATCHER mode, the files recorded in
the built-in flash memory are played back. Operations for listening to a recording made using
MUSIC CATCHER are the same as “CD/MP3/
WMA Operations”. For operations for recoding
using MUSIC CATCHER, refer to the section
“MUSIC CATCHER Operations”.
DXZ758RMC
23
280-8170-00
English
Repeat play
MUSIC CATCHER Operations
English
Setting a recording mode
MUSIC CATCHER can be switched between 2
recording modes:
• HQ (High Quality) MODE: about 265 minutes
• LP (Long Play) MODE: about 353 minutes
∗ The factory default setting is “HQ”.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [a]/[d] lever to select “MC-REC
MODE”.
3. Turn the [ROTARY] knob to select “HQ” or
“LP”.
4. Press the [ADJ] button to return to the previous mode.
Setting RDS interrupt during
recording
The RDS or DAB interrupt function can be
switched on or off during recording using MUSIC CATCHER.
∗ The factory default setting is “OFF”.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [a]/[d] lever to select
“RDS-INT REC”.
3. Turn the [ROTARY] knob to select “ON” or
“OFF”.
● ON:
When “ON” is selected, recording is suspended at the occurrence of an RDS interrupt during recording. (The output is
switched to RDS audio.)
● OFF:
When “OFF” is selected, recording continues
even at the occurrence of an RDS interrupt
during recording. (RDS audio is not output.)
Notes:
• At the occurrence of an emergency broadcast
(alarm interrupt), recording is suspended even
when RDS interrupt is set to “OFF”.
• When TEL interrupt is set to “ON”, recording is
suspended even when RDS interrupt is set to
“OFF”. To avoid this, set the “TEL-SWITCH” setting to “OFF” or disconnect the cellular phone
from the unit.
Notes on recording using MUSIC
CATCHER:
• Recording operations are to be performed in
the CD/MP3/WMA mode.
• Recordable media are CD-DAs only.
• Discs (CD-R/CD-RW) created by copying on a
music recorder cannot be recorded.
• MP3/WMA discs cannot be recorded.
• Some CDs may show a subtractive time indication in the area between tracks when they
are played back. A between-tracks area is not
recorded in such a CD.
• In recording using MUSIC CATCHER, some
amount of silent time is created between the
tracks.
• If the disc contains some tracks that have
been already recorded, the other tracks are
recorded.
• Folder and track names are added automatically during recording.
• If the disc is not recordable, “NO REC DISC”
appears on the display.
• If the disc contains some tracks previously recorded, “INCLUDED” appears on the display.
• If there is no empty folder available, “FOLDER
FULL” appears on the display.
• When the memory capacity is used up,
“MEMORY FULL” appears on the display and
recording is canceled.
• Recording cannot be performed during SCN,
RPT, and RDM. In such cases, “BUSY” appears on the display.
], [BND], and [SCN/RPT/RDM] but• The [
tons and the [a]/[d] lever are invalid during
recording. When these buttons are pressed,
“INVALID” appears on the display.
Recording operation (REC function)
Recording using MUSIC CATCHER is performed in the CD/MP3/WMA mode and the following 2 recording modes are available:
“TRACK REC” to record only one track currently
being played back and “DISC REC” to record all
tracks on the CD.
∗ For details on “Cellular phone interrupt setting”,
refer to the section “Common Operations” of each
owner’s manual.
4. Press the [ADJ] button to return to the previous mode.
24
DXZ758RMC
280-8170-00
MUSIC CATCHER Operations
Notes:
• When a selected track or folder is erased, the approximate recordable time is shown (the recordable time shown varies according to the set recording mode).
• Do not turn off the power to the unit or switch the
operation mode during erasing recordings.
∗ When recording is complete, the “REC” indicator goes off and “REC DONE” appears on
the display for 2 seconds.
●TRACK ERASE
1. Press the [SRC] button to select the
M.CATCHER mode.
2. Play back a file to be erased, and press the
[ERASE] button to select “TRACK ERASE”.
3. Press and hold the [
] button for 2 seconds or longer. The display shows “ERASING” as the track currently being played back
is erased.
●FOLDER ERASE
1. Press the [SRC] button to select the
M.CATCHER mode.
2. Play back any track of the folder to be
erased, and press the [ERASE] button to select “FOLDER ERASE”.
3. Press and hold the [
] button for 2 seconds or longer. The display shows “ERASING” as the folder currently being played
back is erased.
●ALL ERASE
1. Press the [SRC] button to select the
M.CATCHER mode.
2. Press the [ERASE] button for 2 seconds or
longer to select “ALL ERASE”.
3. Press and hold the [
] button for 2 seconds or longer. The display shows “ERASING” as ALL ERASE is executed.
● DISC REC
1. Press the [SRC] button to select the CD/
MP3/WMA mode.
2. Play back a CD to be recorded, and press
and hold the [REC] button for 2 seconds or
longer to start recording. “DISC REC” appears on the display for 2 seconds then the
“REC” indicator lights on the display.
∗ When recording is complete, the “REC” indicator goes off and “REC DONE” appears on
the display for 2 seconds.
Canceling recording
1. Press the [REC] button to cancel the recording process.
The display shows “CANCELED” for 2 seconds and then the playback of the CD continues.
Notes:
• Recording also can be canceled by pressing the
[SRC] or [Q] button.
• When recording is canceled, the track that has
been recorded incompletely is deleted.
Erasing operation (ERASE function)
MUSIC CATCHER has 3 different modes for
erasing files from memory.
“TRACK ERASE” : erase only one track.
“FOLDER ERASE” : erase the whole folder.
“ALL ERASE”
: erase all the contents of
the flash memory.
1. Press the [SRC] button to select the
M.CATCHER mode.
2. Each time you press the [ERASE] button, the
display switches in the following order:
TRACK ERASE ➜ FOLDER ERASE ➜
Normal mode
Remaining capacity of the memory
By pressing the [REC] button while in the
M.CATCHER mode, the remaining capacity of
the flash memory can be displayed for 4 seconds as an approximate recordable time in “MM
(minute): SS (second)”.
The display shows “AVIL. 123:45”.
Note:
• The recordable time shown varies according to
the set recording mode
DXZ758RMC
25
280-8170-00
English
● TRACK REC
1. Press the [SRC] button to select the CD/
MP3/WMA mode.
2. Play back a track to be recorded, and press
the [REC] button to start recording. “TRACK
REC” appears on the display for 2 seconds
then the “REC” indicator lights on the display.
Common Operations
English
Display Adjust Mode
Switching the patterns of the
spectrum analyzer display
∗ The factory default setting is “SRC ICON”.
1. Press and hold the [DISP] button for 1 second
or longer to switch to the display adjust mode.
2. Move the [a]/[d] lever to select “SPE/ANA
PTN”.
3. Turn the [ROTARY] knob to select the setting. Each time you turn the [ROTARY] knob,
the setting changes in the following order:
1 ➜ 2 ➜ 3 ➜ 4 ➜ SRC ICON
∗ “SRC ICON” cannot be selected in the sub
display.
4. Press the [DISP] button to return to the previous mode.
Setting the sensitivity of the
spectrum analyzer display
∗ The factory default setting is “MID”.
1. Press and hold the [DISP] button for 1 second
or longer to switch to the display adjust mode.
2. Move the [a]/[d] lever to select “S/A
SENS”.
3. Turn the [ROTARY] knob to select from
“LOW”, “MID” or “HIGH”.
4. Press the [DISP] button to return to the previous mode.
Setting the speed of the spectrum
analyzer display
∗ The factory default setting is “HIGH”.
1. Press and hold the [DISP] button for 1 second
or longer to switch to the display adjust mode.
2. Move the [a]/[d] lever to select “S/A
SPEED”.
3. Turn the [ROTARY] knob to select from
“LOW”, “MID” or “HIGH”.
4. Press the [DISP] button to return to the previous mode.
Turning the screen saver function
on or off
This unit features various screen saver patterns
that are exhibited across the display. If the
screen savers are not desired, they can be
turned off.
26
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
∗ The factory default setting is “RANDOM”.
1. Press and hold the [DISP] button for 1 second
or longer to switch to the display adjust mode.
2. Move the [a]/[d] lever to select “SCREEN
SVR”.
3. Press the [
] button.
4. Turn the [ROTARY] knob to select the setting. Each time you turn the [ROTARY] knob,
the setting changes in the following order:
OFF ➜ SS1 ➜ SS2 ➜ SS3 ➜ MESSAGE ➜
RANDOM
5. Press the [DISP] button to return to the previous mode.
Entering MESSAGE INFORMATION
When “MESSAGE” is selected for the screen
saver setting, you can change the contents of
the message.
∗ Up to 30 characters can be entered.
∗ The factory default setting is “Welcome to Clarion”.
1. Press and hold the [DISP] button for 1 second
or longer to switch to the display adjust mode.
2. Move the [a]/[d] lever to select
“MSG INPUT”.
3. Press the [
] button.
4. Move the lever to move the cursor.
5. Press the [BND] button to select a character.
Each time you press the [BND] button, the
character changes in the following orders:
Capital letters ➜ Small letters ➜ Numbers
and Symbols ➜ Umlaut ➜ Capital letters…
6. Turn the [ROTARY] knob to select the desired character.
7. Repeat steps 4 to 6 to enter up to 30 characters for message.
8. Press and hold the [
] button for 2 seconds
or longer to store the message in memory and
return to the display adjust mode.
∗ Press and hold the [BND] button for 1 second
or longer to delete the message. Then press
and hold the [
] button for 2 seconds or
longer to return the message to the default
setting.
9. Press the [DISP] button to return to the previous mode.
DXZ758RMC
280-8170-00
Common Operations
Set how to scroll in CD-TEXT, MP3/WMA TITLE.
∗ The factory default setting is “ON”.
1. Press and hold the [DISP] button for 1 second
or longer to switch to the display adjust mode.
2. Move the [a]/[d] lever to select “AUTO
SCROLL”.
3. Turn the [ROTARY] knob to select “ON” or
“OFF”.
● ON:
Scrolls automatically.
● OFF:
Scrolls just 1 time when the title was
changed or you press and hold the [TITLE]
button for 1 second or longer.
4. Press the [DISP] button to return to the previous mode.
Setting the speed of title scroll
∗ The factory default setting is “SPEED3”.
(Speed:1 to 6)
1. Press and hold the [DISP] button for 1 second
or longer to switch to the display adjust mode.
2. Move the [a]/[d] lever to select “SCRL
SPEED”.
3. Turn the [ROTARY] knob to select the setting.
4. Press the [DISP] button to return to the previous mode.
Dimmer control
You can set the dimmer control.
∗ The factory default setting is “3”. (Setting level: OFF,
1 to 5)
1. Press and hold the [DISP] button for 1 second
or longer to switch to the display adjust mode.
2. Move the [a]/[d] lever to select
“DIMMER LV”.
3. Turn the [ROTARY] knob to select the setting.
4. Press the [DISP] button to return to the previous mode.
Dimmer in control
You can set the dimmer in control.
∗ The factory default setting is “AUTO”.
2. Move the [a]/[d] lever to select “DIMMER
IN”.
3. Turn the [ROTARY] knob to select “AUTO” or
“ILLUMI”.
4. Press the [DISP] button to return to the previous mode.
Adjusting the display contrast
You can adjust the display contrast to match the
angle of installation of the unit.
∗ The factory default setting is “8”. (Adjustment level:
1 to 16)
1. Press and hold the [DISP] button for 1 second
or longer to switch to the display adjust mode.
2. Move the [a]/[d] lever to select
“CONTRAST”.
3. Turn the [ROTARY] knob to adjust the contrast.
4. Press the [DISP] button to return to the previous mode.
Adjust Mode
Anti-theft indicator
The red Anti-theft indicator is a function for
detering theft. When the DCP is removed from
the unit, this indicator blinks.
∗ The factory default setting is “OFF”.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [a]/[d] lever to select “BLINK
LED”.
3. Turn the [ROTARY] knob to select “ON” or
“OFF”.
4. Press the [ADJ] button to return to the previous mode.
Setting the subwoofer
∗ The factory default setting is “ON”.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [a]/[d] lever to select “SUB-W”.
3. Turn the [ROTARY] knob to select “ON” or
“OFF”.
4. Press the [ADJ] button to return to the previous mode.
1. Press and hold the [DISP] button for 1 second or longer to switch to the display adjust
mode.
DXZ758RMC
27
280-8170-00
English
Setting the method for title scroll
Common Operations
English
Setting the low pass filter
∗ The factory default setting is “THROUGH”.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [a]/[d] lever to select
“SUB-W LPF”.
3. Turn the [ROTARY] knob to select the setting. Each time you turn the [ROTARY] knob,
the setting changes in the following order:
THROUGH ➜ 50Hz ➜ 80Hz ➜ 120Hz
4. Press the [ADJ] button to return to the previous mode.
Setting the amplifier bypass circuit
∗ The factory default setting is “OFF”.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [a]/[d] lever to select “AMP
CANCEL”.
3. Turn the [ROTARY] knob to select “ON” or
“OFF”.
● ON:
Uses with connected AMP.
● OFF:
Uses with inside AMP.
4. Press the [ADJ] button to return to the previous mode.
Selecting AUX/TEL
You can listen to sounds and music from external devices or your telephone calls from the
speakers when connected to this unit.
When TEL INT or External device is connected to
this unit, you can select TEL mode or AUX mode.
∗ The factory default setting is “AUX”.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [a]/[d] lever to select “AUX/TEL”.
3. Turn the [ROTARY] knob to select “AUX” or
“TEL”.
● AUX :
AUX/TEL input cable is for external Audio input.
● TEL :
AUX/TEL input cable is for cellular phone audio input.
4. Press the [ADJ] button to return to the previous mode.
28
Adjusting the auxiliary input
sensitivity
Adjust the auxiliary sensitivity when the audio
from an external device is difficult to hear even
after adjusting the volume.
∗ The factory default setting is “MID”.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [a]/[d] lever to select
“AUX SENS”.
3. Turn the [ROTARY] knob to select from
“LOW”, “MID” or “HIGH”.
4. Press the [ADJ] button to return to the previous mode.
Setting the car speaker output for the
cellular phone (Optional TEL-002)
∗ The factory default setting is “RIGHT”.
∗ To output the telephone calls, set the cellular phone
interrupt to ON.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [a]/[d] lever to select “TELSPEAKER”.
3. Turn the [ROTARY] knob to select “RIGHT”
or “LEFT”.
● RIGHT:
Telephone calls can be heard on the front
right speaker connected to this unit.
● LEFT:
Telephone calls can be heard on the front left
speaker connected to this unit.
4. Press the [ADJ] button to return to the previous mode.
Cellular phone interrupt setting
If you connect this unit and your cellular phone
with a separately sold unit (TEL-002), you can
listen to your telephone calls on your car speakers.
∗ The factory default setting is “OFF”.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [a]/[d] lever to select
“TEL-SWITCH”.
3. Turn the [ROTARY] knob to select the setting. Each time you turn the [ROTARY] knob,
the setting changes in the following order:
OFF ➜ ON ➜ MUTE ➜ OFF...
DXZ758RMC
280-8170-00
Common Operations
∗ When listening to your calls on your car
speakers, you can adjust the volume by turning the [ROTARY] knob.
● MUTE:
The sound from this unit is muted during
telephone calls.
4. Press the [ADJ] button to return to the previous mode.
Setting the auto-volume function
(CALIBRATE/A-VOL SENS)
You can automatically change the volume to
match your car's speed.
∗ The factory default setting is “LOW”.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [a]/[d] lever to select “CALIBRATE”.
3. Press the [
] button.
4. Accelerate to a speed of 50 km.
5. When you reach 50 km, press [
] button.
Calibration is executed.
● When calibration succeeded
After 2 seconds or longer, “SUCCESSFUL”
will appear on the display.
● When calibration failed
After 2 seconds or longer, “FAILED” will appear on the display. Repeat the procedure
from step 4.
6. Next, adjust the sensitivity. Move the [a]/
[d] lever to select “A-VOL SENS”.
7. Turn the [ROTARY] knob to select the sensitivity.
Each time you turn the [ROTARY] knob, the
setting changes in the following order:
OFF (no charge in volume) ➜ LOW (charge
in volume: small) ➜ MID-LOW ➜ MID ➜ MIDHIGH ➜ HIGH (charge in volume: large) ...
8. Press the [ADJ] button to return to the previous mode.
Performing a system check
This function verifies the devices hooked up
through CeNET.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [a]/[d] lever to select “SYSTEM
CHECK”.
] button for 1 sec3. Press and hold the [
ond or longer to start the system check.
The digital connection configuration is automatically checked.
When the system check is complete, the display returns to the previous mode.
Other operations
Setting the button illumination
Press the [COLOR] button to select a color.
Each time you press the [COLOR] button, the
color changes in the following order:
COLOR SCAN ➜ Indigo Blue ➜ Surf Blue ➜
Silky White ➜ Aqua Green ➜ Fresh Green ➜
Leaf Green ➜ Warm Amber ➜ Passion Red
➜ Vivid Pink ➜ Pale Pink ➜ Dark Violet ➜
Pure Purple ➜ USER COLOR1 ➜ USER
COLOR2 ➜ USER COLOR3 ➜ COLOR
SCAN...
●Setting COLOR SCAN mode
Selecting “COLOR SCAN”, the color automatically changes.
∗ The factory default setting is “COLOR SCAN”.
∗ Every 3 seconds the color changes to another.
●Setting USER mode
∗ The factory default setting is “RED 8, GREEN 8,
BLUE 8”.
Selecting “USER COLOR 1, 2, 3”, press and
hold the [COLOR] button for 1 second or longer.
“RED 8” appears in the display.
1. Move the [a]/[d] lever to move the cursor.
2. Turn the [ROTARY] knob to select from 0 to
8.
3. Press and hold the [
] button for 2 seconds or longer to store the color in memory
and return to the previous mode.
DXZ758RMC
29
280-8170-00
English
● OFF:
This unit continues normal operation even
when the cellular phone is used.
Note:
• If connecting a hands-free kit, please ensure the
setting is ON to receive the telephone audio
through the system.
● ON:
You can listen to your telephone calls from
the speakers connected to this unit.
Common Operations
English
COLOR
Indigo Blue
Surf Blue
Silky White
Aqua Green
Fresh Green
Leaf Green
Warm Amber
Passion Red
Vivid Pink
Pale Pink
Dark Violet
Pure Purple
USER COLOR 1
USER COLOR 2
USER COLOR 3
R
0
0
8
0
0
3
8
8
8
8
3
6
8
8
8
G
0
4
8
8
8
8
3
0
0
2
0
0
8
8
8
B
8
8
7
2
0
0
0
0
3
3
8
8
8
8
8
4. Press and hold the [TITLE] button for 1 second or longer to switch to the title input display.
5. Move the [a]/[d] lever to move the cursor.
6. Press the [BND] button to select a character.
Each time you press the [BND] button, the
character changes in the following order:
Capital letters ➜ Small letters ➜ Numbers
and Symbols ➜ Umlaut ➜ Capital letters…
7. Turn the [ROTARY] knob to select the desired character.
8. Repeat steps 5 to 7 to enter up to 10 characters for the title.
9. Press and hold the [
] button for 2 seconds or longer to store the title into memory
and return to the previous mode.
Entering titles
Clearing titles
Titles up to 10 characters long can be stored in
memory and displayed for CD, M.CATCHER,
CD changer and TV stations. The number of
titles that can be entered for each mode are as
follows.
1. Play a track or tune in to a TV station for
which you want to delete the title.
2. Do one of the following:
● In the CD or CD changer mode
Press the [TITLE] button to select “USER”.
● In the M.CATCHER mode
Press the [TITLE] button to select
“FOLDER”.
Mode
CD mode
TV mode
Number of titles
50 titles
20 titles
CD changer mode
DCZ628 connected
CDC655Tz connected
CDC1255z connected
Number of titles
100 titles
100 titles
50 titles
1. Press the [SRC] button to select the mode
you want to enter a title (CD, M.CATCHER,
CD changer or TV).
2. Play a track or tune in to a TV station for
which you want to enter the title.
3. Do one of the following:
● In the CD or CD changer mode
Press the [TITLE] button to select “USER”.
● In the M.CATCHER mode
Press the [TITLE] button to select
“FOLDER”.
∗ In the title display, select “FOLDER” in the upper title.
● In the TV mode
Skip this step.
3. Press and hold the [TITLE] button for 1 second or longer to switch to the title input display.
4. Press and hold the [BND] button for 1 second or longer to delete the title.
5. Press and hold the [
] button for 2 seconds or longer to store the setting and return
to the previous mode.
∗ In the title display, select “FOLDER” in the upper title.
● In the TV mode
Skip this step.
30
DXZ758RMC
280-8170-00
Common Operations
English
Cellular telephone mute
This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car.
∗ This function is not compatible with all cellular telephones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.
AUX function
This system has an external input jack so you
can listen to audio from an external device connected to this unit.
DXZ758RMC
31
280-8170-00
English
7. OPERATIONS OF ACCESSORIES
CD Changer Operations
CD changer functions
Procedure to scroll a title
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a total of 2 changers.
Press the [SRC] button and select the CD
changer mode to start play. If 2 CD changers
are connected, press the [SRC] button to select
the CD changer for play.
Set “SCROLL” to “ON” or “OFF”.
(The factory default setting is “ON”. Refer to the
subsection “Setting the method for title scroll”
in the section “ Common Operations ”.)
● When set to “ON”
The title is automatically kept scrolling.
● When set to “OFF”
To scroll just 1 time when the title was changed
or you press and hold the [TITLE] button for 1
second or longer.
∗ If “NO MAGAZINE” appears in the display, insert
the magazine into the CD changer. “DISC CHECK”
appears in the display while the player loads
(checks) the magazine.
∗ If “NO DISC” appears in the display, eject the magazine and insert discs into each slot. Then, reinsert
the magazine back into the CD changer.
Note:
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
CAUTION
CD-ROM discs cannot be played from every
CD changer, it’s depended on the model.
Pausing play
1. Press the [
] button to pause play.
“PAUSE” appears in the display.
] button again.
2. To resume play, press the [
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
●When connected to CDC655Tz or DCZ628
1. Each time you press the [TITLE] button, the
title changes in the following order:
User title (disc) ➜ CD-text title (disc) ➜
Artist name ➜ CD-text title (track) ➜ User
title (disc)…
Notes:
• If the CD playing is not a CD-text CD or no user
title has been input, “NO TITLE” appears in the
display.
• If a CD-text CD is not input its disc title or a track
title, “NO TITLE” appears in the display.
32
Selecting a CD
Press the [UP] or the [DN] button to select the
desired disc.
∗ If a CD is not loaded in a slot of magazine, pressing
the [UP] or the [DN] button cannot work.
Selecting a track
● Track-up
1. Move the [a]/[d] lever up to move ahead
to the beginning of the next track.
2. Each time you move the lever up, the track
advances ahead to the beginning of the next
track.
● Track-down
1. Move the [a]/[d] lever down to move back
to the beginning of the current track.
2. Move the lever down twice to move to the
beginning of the previous track.
DXZ758RMC
280-8170-00
CD Changer Operations
Random play
● Fast-forward
Move the [a]/[d] lever up for 1 second or
longer.
● Fast-rewind
Move the [a]/[d] lever down for 1 second or
longer.
Random play selects and plays individual tracks
on the disc in no particular order. This function
continues automatically until it is cancelled.
1. Press the [RDM] button.
2. To cancel random play, press the [RDM] button again.
Scan play
Disc random play
Scan play locates and plays the first 10 seconds
of each track on a disc automatically. This function continues on the disc until it is cancelled.
The disc random play selects and plays individual tracks or discs automatically in no particular order. This function continues automatically until it is cancelled.
1. Press and hold the [RDM] button for 1 second or longer.
2. To cancel disc random play, press the [RDM]
button again.
∗ The scan play is useful when you want to select a
desired track.
1. Press the [SCN] button.
2. To cancel the scan play, press the [SCN] button again.
Disc scan play
Disc scan play locates and plays the first 10
seconds of the first track on each disc in the
currently selected CD changer. This function
continues automatically until it is cancelled.
∗ Disc scan play is useful when you want to select a
desired CD.
1. Press and hold the [SCN] button for 1 second or longer.
2. To cancel disc scan play, press the [SCN]
button again.
Repeat play
Repeat play continuously plays the current
track. This function continues automatically until
it is cancelled.
1. Press the [RPT] button.
2. To cancel repeat play, press the [RPT] button
again.
Disc repeat play
After all the tracks on the current disc have
been played, disc repeat play automatically replays the current disc over from the first track.
This function continues automatically until it is
cancelled.
1. Press and hold the [RPT] button for 1 second
or longer.
2. To cancel disc repeat play, press the [RPT]
button again.
DXZ758RMC
33
280-8170-00
English
Fast-forward/fast-rewind
TV Operations
English
TV tuner functions
When an optional TV tuner is connected through
the CeNET cable, this unit controls all TV tuner
functions. To watch TV it requires a TV tuner
and a monitor.
Watching a TV
1. Press the [SRC] button and select the TV
mode.
2. Press the [BND] button to select the desired
TV band (TV1 or TV2). Each time the button
is pressed, the input selection toggles between TV1 and TV2.
3. Move the [a]/[d] lever to tune in the desired TV station.
Watching a video
The TV tuner features a VTR input for an external A/V source, such as a DVD player or game
station.
1. Press and hold the [ADJ] button for 1 second
or longer to select VTR.
2. To return to the TV broadcast, press and
hold the [ADJ] button for 1 second or longer.
TV tuning
There are 3 types of TV tuning modes available,
seek, manual and preset tuning.
Seek tuning
1. Press the [BND] button and select the desired TV band (TV1 or TV2).
∗ If “MANU” is lit in the display, press and hold
the [BND] button for 1 second or longer.
“MANU” in the display goes off and seek tuning is now available.
2. Move the [a]/[d] lever to automatically
seek a station. Move the lever up to automatically tune up the frequency band to the
next available TV station; move the lever
down to automatically tune down.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the frequency changes one step at a time. In the quick
tuning mode, you can quickly tune the desired
frequency.
34
1. Press the [BND] button and select the desired band (TV1 or TV2).
∗ If “MANU” is not lit in the display, press and
hold the [BND] button for 1 second or longer.
“MANU” lights in the display and manual tuning is now available.
2. Tune into a station.
● Quick tuning:
Move the [a]/[d] lever for 1 second or
longer to tune in a station.
● Step tuning:
Move the [a]/[d] lever to manually tune in
a station.
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your favorite TV stations and store them in memory.
1. Press the [BND] button and select the desired TV band (TV1 or TV2).
2. To recall a stored TV station, press the desired [DIRECT] button to select that station.
∗ Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into preset memory.
Manual memory
1. Select the desired station with seek tuning,
manual tuning or preset tuning.
2. Press and hold one of [DIRECT] buttons for
2 seconds or longer to store the current station into preset memory.
Auto store
Auto store selects 6 TV stations automatically
and stores each one into preset memory.
If there are not 6 stations with good reception
are available, stations previously stored in
memory remain. Only stations with strong reception are stored into memory.
1. Press the [BND] button and select the desired TV band (TV1 or TV2).
2. Press and hold the [PS/AS] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset
channels.
DXZ758RMC
280-8170-00
TV Operations
Preset scan allows the user to view each preset
position before it automatically advances to the
next preset. This function is useful for searching
for a desired TV station in memory.
1. Press the [PS/AS] button.
2. When the desired station is found, press the
[PS/AS] button again to remain tuned to that
station.
Note:
• Do not press and hold the [PS/AS] button for 2
seconds or longer. Doing so will trigger the auto
store function and start storing stations into
memory.
Setting the TV area
When you select the TV area (TV reception
area), the TV tuner area setting changes.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [a]/[d] lever to select “TV AREA”.
3. Turn the [ROTARY] knob to select the reception area.
4. Press the [ADJ] button to return to the previous mode.
Setting the TV diver
You can change the reception setting for the TV
antenna connected to the TV tuner.
∗ The factory default setting depends on the TV.
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [a]/[d] lever to select “TV
DIVER”.
3. Turn the [ROTARY] knob to select “ON” or
“OFF”.
● ON:
Sets the diver setting to ON.
● OFF:
Sets the diver setting to OFF.
4. Press the [ADJ] button to return to the previous mode.
DAB control function
When a CeNET cable is used to connect a DAB
(DAH913 or DAH923) (sold separetely), all functions can be operated.
Listening to the DAB station
1. Press the [SRC] button to select the DAB
mode.
2. When the unit receives a DAB station, the
display changes in the following order:
Frequency channel ➜ service label
Switching the display
1. Each time you press the [TITLE] button, the
display switches in the following order:
S-LABEL
PTY
Notes:
• The display shown in the normal reception mode
and the preset reception mode is the same when
a DAB station is received.
• The number of programmes and broadcasting
times depend on the DAB stations.
• When the strength of DAB signals is weak, audio
output is muted.
Seek tuning
1. Press the [SRC] button to select the DAB mode.
2. Move the [a]/[d] lever for 1 second or
longer.
“DAB” lights up in the display when the main
unit receives a DAB station.
* The main unit stops the seek tuning when it
cannot find a DAB station. The display returns
to the previous mode.
Manual tuning
1. Press the [SRC] button to select the DAB
mode.
2. Press and hold the [BND] button for 1 second or longer. “MANU” lights up in the display.
3. Move the [a]/[d] lever to select a station.
∗ If no operation is performed for more than 7
seconds, manual tuning is cancelled and the
display returns to the previous mode.
DXZ758RMC
35
280-8170-00
English
Preset scan
Digital Radio / DAB Operations
Digital Radio / DAB Operations
English
Switching programmes
Recalling a preset programme
1. Press the [SRC] button to receive a DAB station.
2. Move the [a]/[d] lever to switch
programmes in the DAB station.
Note:
• The programme name may be the same depending on DAB programmes.
1. Press the [SRC] button to select the DAB mode.
2. Press the [BND] button. Each time you press
the [BND] button, the display changes in the
following order:
[M1] ➜ [M2] ➜ [M3] ➜ [M1]...
3. Press one of the [DIRECT] buttons to recall a
preset programme.
Note:
• Press and hold the [DIRECT] button for 2 seconds or longer to store the programme currently
being received. (Manual memory)
Programme scan
This function scans through each receivable
programme in a DAB station being received for
10 seconds sequentially. This is useful when
you want to search for a desired programme.
1. Press the [SRC] button to receive a DAB station.
2. Perform the following operation depending
on the connected model.
Press the [PS/AS] button. “SERVICE SCN”
lights up and the unit starts scanning each
programme for 10 seconds sequentially.
Each time the main unit scans, the
programme name is shown in the display.
3. To stop programme scan when a desired
programme is tuned in.
Press the [PS/AS] button.
Manual memory
The main unit has a manual memory function
for DAB programmes. Up to 18 programmes (6
programmes each) can be preset in the preset
buttons.
[M1], [M2] and [M3]
1. Press the [SRC] button to select the DAB
mode.
2. Press the [BND] button to select any one
shown above.
3. Move the [a]/[d] lever to select a desired
programme.
4. Press and hold one of the [DIRECT] buttons
(1 to 6) for 2 seconds or longer to store the
programme.
Note:
• The interrupt programme (PTY or INFO) cannot
be written into a manual memory.
AF function
The AF function switches to a different frequency on the same network in order to maintain optimum reception.
∗ The factory default setting is “ON”
∗ If the reception of the current broadcast station deteriorates, “SEARCH” appears in the display and
the radio searches for the same programme on
another frequency.
∗ For details on “AF function”, refer to the section
“RDS operation” of each owner’s manual.
● Switching OFF the AF function
● Switching ON the AF function
● AF function between RDS and DAB
When the same programme is broadcast by
both RDS and DAB, and this function is ON, the
main unit switches to receiving the broadcast
with the better reception automatically.
TA (Traffic Announcement)
In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement
broadcast is received as top priority regardless of
the function mode. Traffic programme (TP) automatic tuning is also possible.
∗ This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
DAB or RDS broadcast station being received has
traffic announcement programmes.
∗ For details on “TA”, refer to the section “RDS operation” of each owner’s manual.
● Setting the TA standby mode
● Cancelling the TA standby mode
● Searching for a TP station
36
DXZ758RMC
280-8170-00
Digital Radio / DAB Operations
INFO (Announcement)
In the INFO standby mode, when the selected
announcement programme starts, the main unit
switches to the selected announcement
programme automatically.
● Setting the INFO standby mode
If you press and hold the [TA] button for 1 second or longer, “INFO” lights in the display and
the main unit is set into the INFO standby mode
until the selected announcement is broadcast.
When the selected announcement broadcast
starts, the announcement item appears in the
display. If you press and hold the [TA] button for
1 second or longer while the selected announcement broadcast is being received, the
selected announcement broadcast reception is
cancelled and the main unit goes into the INFO
standby mode.
● Cancelling INFO standby mode
To cancel the INFO standby mode, press and
hold the [TA] button for 1 second or longer or
press the [SRC] button.
● Information select
This is a function for selecting INFORMATION
ON or OFF in the Information interrupt mode.
You can set ON up to 6 information items.
You can select any of the 6 items below:
ENGLISH
Travel
Warning
News
Weather
Event
Special
INFORMATION item
Contents
Transport flash
Warning / Service
News flash
Area weather flash
Event announcement
Special event
1. Perform the following operation depending
on the connected model.
Press and hold the [ADJ] button for 1 second or longer to switch to the RDS mode.
2. Move the [a]/[d] lever to select “INFO
] button to enter
SEL”, then press the [
“INFO SEL” mode.
3. Move the [a]/[d] lever to select an information item. You can select any of 6 items:
Travel ➜ Warning ➜ News ➜ Weather ➜
Event ➜ Special ➜ Travel ➜ ...
4. Turn the [ROTARY] knob to set the information item for ON or OFF.
5. Press the [
] button to store the setting.
6. Press the [ADJ] button to return to the previous display.
PTY
This function enables you to listen to the selected programme type, irrespective of the function mode.
∗ One common PTY can be selected for DAB or RDS.
∗ Of DAB PTY and RDS PTY, the PTY which is received earlier takes priority over the other.
∗ PTY broadcasts are not yet available in all countries.
∗ In the INFO standby mode, INFO stations have priority over PTY stations.
∗ In the TA standby mode, TP stations have priority
over PTY stations.
∗ For details on “PTY”, refer to the section “RDS operation” of each owner’s manual.
●Setting the PTY standby mode
●Cancelling the PTY standby mode
●Cancelling a PTY interrupt broadcast
●Selecting PTY
●PTY seek
●PTY preset memory
Emergency broadcast
When an emergency broadcast is received, all
the function mode operations are stopped.
“ALARM” appears in the display and the emergency broadcast can be heard.
∗ For details on “Emergency broadcast”, refer to the
section “RDS operation” of each owner’s manual.
●Cancelling an emergency broadcast
DXZ758RMC
37
280-8170-00
English
Notes:
• If a TP station is not received, the main unit stops
the search operation.
• “TP” may be lit in the display when a TP broadcast is transmitted from an RDS station. In this
case, press the [TA] button to perform TP seek
tuning. Press the [TA] button again to return to the
previous mode.
Digital Radio / DAB Operations
English
Switching the PTY and INFO display
language
You can select one of 4 languages (English,
German, Swedish or French) for the PTY and
INFO shown in the display.
∗ The factory default setting is “ENGLISH”.
∗ For details on “Switching the PTY display language”, refer to the section “RDS operation” of
each owner’s manual.
Volume setting of TA, INFO,
emergency broadcast (ALARM) and
PTY
The volume for TA, INFO, ALARM and PTY interrupts can be set during TA, INFO, ALARM
and PTY interrupt. Perform the following operation depending on the connected model.
∗ The factory default setting is “15”.
During a TA, INFO, ALARM or PTY interrupt,
turning the [ROTARY] knob to set the volume to
a desired level (0 to 33).
∗ When the TA, INFO, ALARM or PTY interrupt ends,
the volume returns to the level it had before the
interrupt.
38
DXZ758RMC
280-8170-00
CD/MP3/WMA
General
Problem
Cause
English
8. IN CASE OF DIFFICULTY
Measure
Power does not
turn on.
(No sound is
produced.)
Fuse is blown.
Replace with a fuse of the same amperage. If the
fuse blows again, consult Clarion dealer.
Incorrect wiring.
Consult Clarion dealer.
No audio when
operating the unit
with amplifiers.
Amplifier turn-on lead is
Turn the unit off and check each wire for a possible
shorted to ground or
short. If the amplifier turn-on lead shorts out, cover it
excessive current is required. with insulation such as tape.
Nothing happens
when buttons are
pressed.
The microprocessor has
malfunctioned due to noise,
etc.
Display is not
accurate.
DCP or main unit connectors Wipe the dirt off with a soft cloth moistened with
cleaning alcohol.
are dirty.
No audio.
The speaker protection
circuit is operating.
1. Check the speaker connection.
2. Turn down sound volume. Function can also be
restored by turning the power off and on again.
3. If the sound is muted again, consult Clarion dealer.
No audio.
There is a disc other than a
compact disc or foreign
object already in place.
With the sloping console open, press and hold the
[Q] button for 3 seconds or longer.
The foreign object is forcibly ejected.
MP3/WMA files are absent
on the disc.
Write MP3/WMA files onto the disc properly.
Files are not recognized as
an MP3/WMA file.
Use MP3/WMA files encoded properly.
File system is not correct.
Use ISO9660 level 1, 2 or JOLIET or Romeo file system.
Disc is dirty.
Clean the disc with a soft cloth.
Disc is heavily scratched or
warped.
Replace with a disc with no scratches.
Sound skips or is
noisy.
Reset button
Turn off the power, then
press the [RELEASE] button
and remove the DCP.
Press the reset button for
about 2 seconds with a thin
rod.
Sound is cut or
MP3/WMA files are not
skipped.
encoded properly.
Noise is generated
or noise is mixed
with sound.
Use MP3/WMA files encoded properly.
Poor sound quality
in extremely cold
weather or
extreme humidity.
Water droplets may form on
the internal lens when the
car is parked in a humid
place.
Let dry for about 1 hour with the power on.
Wrong filename
File system is not correct.
Use ISO9660 level 1, 2 or JOLIET or Romeo file system.
Play list play is
not performed.
File name or extension is not Use alphanumeric/ASCII characters for MP3/WMA
correct.
file name.
Use “.M3U” for the file extension of a play list.
DXZ758RMC
39
280-8170-00
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
CD changer
M.CATCHER
CD/MP3/WMA
Error Display
DVD changer
English
9. ERROR DISPLAYS
Cause
Measure
ERROR 2
A DISC is caught inside the CD deck and is
not ejected.
This is a failure of CD deck’s mechanism and
consult Clarion dealer.
ERROR 3
A DISC cannot be played due to scratches,
etc.
Replace with a non-scratched disc.
ERROR 6
A DISC is loaded upside-down inside the
CD deck and cannot play.
Eject the disc then reload it properly.
ERROR 7
The format of the flash memory is damaged.
Execute ALL ERASE on the flash memory,
and the problem is solved.
ERROR 8
There is a failure with the flash memory.
Turn POWER/ACC off and then turn it on
again, and the problem is solved.
If not solved, executed ALL ERASE on the
flash memory, and the problem is solved.
ERROR 9
An error during recording, scratch on the
disc, or error due to sound skips
Turn POWER/ACC off and then turn it on
again, or eject the CD. The problem is
solved.
ERROR 2
A DISC inside the CD changer is not loaded
properly.
This is a failure of CD changer’s mechanism
and consult Clarion dealer.
ERROR 3
A DISC inside the CD changer cannot be
played due to scratches, etc.
Replace with a non-scratched disc.
ERROR 6
A DISC inside the CD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly.
ERROR 2
A DISC inside the DVD changer is not
loaded properly.
This is a failure of DVD mechanism and consult Clarion dealer.
ERROR 3
A DISC cannot be played due to scratches,
etc.
Retry or replace with a non-scratched disc.
ERROR 6
A DISC inside the DVD changer cannot be
played because it is loaded upside-down.
Eject the disc then reload it properly
ERROR P
Parental level error
Set the correct Parental level.
ERROR R
Region code error
Eject the disc and replace correct region
code disc.
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult Clarion dealer.
40
DXZ758RMC
280-8170-00
Radio section
General
Tuning System:
PLL synthesizer tuner
Receiving Frequencies:
FM : 87.5 to 108 MHz (0.05 MHz steps)
MW : 531 to 1602 kHz (9 kHz steps)
LW : 153 to 279 kHz (3 kHz steps)
Output Power: 4 ✕ 31 W (DIN 45324, +B=14.4V)
Power Supply Voltage:
14.4 V DC (10.8 to 15.6 V allowable),
negative ground
Power Consumption: Less than 15 A
Speaker Impedance: 4 Ω (4 to 8 Ω allowable)
Auto Antenna Rated Current: 500 mA or less
Weight / Main unit:
1.6 kg
Weight / Remote control unit:
40 g (including battery)
Dimensions / Main unit:
178 (W) ✕ 50 (H) ✕ 155 (D) mm
Dimensions / Remote control unit:
44 (W) ✕ 113 (H) ✕ 13 (D) mm
CD player
System: Compact disc digital audio system
Frequency Response: 5 Hz to 20 kHz (± 1 dB)
Signal to Noise Ratio: 100 dB (1 kHz) IHFA
Dynamic Range: 95 dB (1 kHz)
Distortion: 0.01%
MC mode
HQ:
Approximately 265 minutes, 66 tracks
(4 minutes for each)
LP:
Approximately 353 minutes, 88 tracks
(4 minutes for each)
Note:
• Specifications and design are subject to change without notice for further improvement.
DXZ758RMC
41
280-8170-00
English
10. SPECIFICATIONS
42
DXZ758RMC
280-8170-00
Download PDF