Crestron | TSW-UMB-PMK | Installation Guide: TSW-UMB

Crestron TSW-UMB
Universal Mounting Bracket
for Touch Screens and Wall Docks
Installation Guide
The specific patents that cover Crestron products are listed at patents.crestron.com.
Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United
States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to
refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in
the marks and names of others. Crestron is not responsible for errors in typography or photography.
This document was written by the Technical Publications department at Crestron.
©2014 Crestron Electronics, Inc.
Crestron TSW-UMB
Universal Mounting Bracket
Contents
Universal Mounting Bracket for Touch Screens and Wall Docks: TSW-UMB
1
Introduction ............................................................................................................................... 1
Specifications .............................................................................................................. 2
Physical Description .................................................................................................... 3
Installation ................................................................................................................................. 5
Resources ................................................................................................................................... 9
Further Inquiries .......................................................................................................... 9
Future Updates ............................................................................................................ 9
Return and Warranty Policies .................................................................................................. 10
Merchandise Returns / Repair Service ...................................................................... 10
Crestron Limited Warranty........................................................................................ 10
Installation Guide – DOC. 7590D
Contents • i
Crestron TSW-UMB
Universal Mounting Bracket
Universal Mounting Bracket for
Touch Screens and Wall Docks:
TSW-UMB
Introduction
The TSW-UMB provides an easy in-wall mounting solution for many
Crestron® touch screens and wall docks. Its universal design
accommodates any of the models listed below, simplifying specification,
reducing inventory, and allowing the bracket to be installed even before
the specific device or screen size has been selected.
COMPATIBLE MODELS
IDOC-PAD-LCA-DSCW
TSW-5501
TSW-5521
TSW-7502
TSW-7522
TSW-1050
TSW-1052
1. The TSW-550 and TSW-552 each ship with (1) TSW-UMB and (1)
TSW-UMB-PMK included.
2. The actual installed position of the TSW-750 or TSW-752 will be offset
approximately 1/4” (6 mm) to the left relative to the mounting bracket and cutout.
This is not an issue with other touch screen models.
Installation Guide – DOC. 7590D
Universal Mounting Bracket: TSW-UMB • 1
Universal Mounting Bracket
Crestron TSW-UMB
The TSW-UMB is designed for post-construction installation in existing
drywall or paneling. It is also suitable for use in a lectern or podium. For
pre-construction applications, the TSW-UMB can be used along with a
TSW-UMB-PMK Pre-Construction Mounting Kit. Masonry and concrete
applications can be accommodated using the TSW-UMB along with a
TSW-550-BBI back box.
Specifications
Specifications for the TSW-UMB are listed in the following table.
TSW-UMB Specifications
SPECIFICATION
Construction
Mounting1
Required Cutout
Maximum Surface Thickness
Minimum Mounting Depth
Pre-Construction Option
Masonry Back Box Option
DETAILS
Metal bracket and clamp
assembly
2 1/2 in (64 mm) high x
3 3/4 in (96 mm) wide2
1 1.4 in (32 mm)
2 13/16 n (72 mm)
TSW-UMB-PMK
Pre-Construction Mounting
Kit (sold separately)
TSW-550-BBI Wall Mount
Back Box – International
Version (sold separately)
1. Consult the installation manual for each device for additional clearances and
complete mounting instructions.
2. The actual installed position of the TSW-750 or TSW-752 is offset approximately
1/4” (6 mm) to the left relative to the mounting bracket and cutout. This is not an
issue with the other touch screen models.
2 • Universal Mounting Bracket: TSW-UMB
Installation Guide – DOC. 7590D
Crestron TSW-UMB
Universal Mounting Bracket
Physical Description
TSW-UMB Overall Dimensions (Front View)
4.74 in
(121 mm)
3.05 in
(78 mm)
TSW-UMB Overall Dimensions (Top View)
3.60 in
(92 mm)
2.85 in
(73 mm)
1.72 in
(44 mm)
Installation Guide – DOC. 7590D
Universal Mounting Bracket: TSW-UMB • 3
Crestron TSW-UMB
Universal Mounting Bracket
TSW-UMB Overall Dimensions (Side View)
2.10 in
(54 mm)
3.23 in
(82 mm)
TSW-UMB Cutout Dimensions
3 3/4 in
(96 mm)
2 1/2 in
(64 mm)
4 • Universal Mounting Bracket: TSW-UMB
Installation Guide – DOC. 7590D
Crestron TSW-UMB
Universal Mounting Bracket
Installation
NOTE: The TSW-UMB is designed for post-construction installation in
existing drywall or paneling. It is also suitable for use in a lectern or
podium. For pre-construction applications, the TSW-UMB can be used
along with a TSW-UMB-PMK Pre-Construction Mounting Kit (sold
separately).
To install the TSW-UMB, use the following procedure:
CAUTION: Allow an air gap of at least 12 inches (305 mm) in the wall
cavity above and below the TSW-UMB for heat dissipation.
1. Place the cutout template (40144) included with the TSW-UMB in
the desired location, ensuring it is level.
2. Trace the cutout all around the opening, then cut the hole with an
appropriate drywall saw (not included).
NOTE: Do not remove the screws holding the two parts of the assembly
together.
3. Install the assembly in the opening, bottom first, as shown in the
illustrations that follow steps 4 and 5.
Installation Guide – DOC. 7590D
Universal Mounting Bracket: TSW-UMB • 5
Universal Mounting Bracket
Crestron TSW-UMB
Post-Construction Installation of the TSW-UMB into Cutout
CAUTION: To avoid damage to the TSW-UMB, do not overtighten
screws.
6 • Universal Mounting Bracket: TSW-UMB
Installation Guide – DOC. 7590D
Crestron TSW-UMB
Universal Mounting Bracket
4. Reach into the TSW-UMB assembly and push the rear half back to
ensure it is fully behind the mounting surface. Ensure the front of
the TSW-UMB assembly is level.
Installing the TSW-UMB Assembly (1 of 2)
After loosening both screws
push top surface downward,
installing bottom half first
Installation Guide – DOC. 7590D
Universal Mounting Bracket: TSW-UMB • 7
Universal Mounting Bracket
Crestron TSW-UMB
5. Tighten the two screws to complete the installation.
Installing the TSW-UMB Assembly (2 of 2)
Push rear half back
Ensure front is level,
then tighten both screws
8 • Universal Mounting Bracket: TSW-UMB
Installation Guide – DOC. 7590D
Crestron TSW-UMB
Universal Mounting Bracket
Resources
Further Inquiries
To locate specific information or resolve questions after reviewing this
guide, contact Crestron's True Blue Support at 1-888-CRESTRON
[1-888-273-7876] or, for assistance within a particular geographic region,
refer to the listing of Crestron worldwide offices at
www.crestron.com/offices.
To post a question about Crestron products, log onto Crestron’s Online
Help at www.crestron.com/onlinehelp. First-time users must establish a
user account to fully benefit from all available features.
Future Updates
As Crestron improves functions, adds new features, and extends the
capabilities of the TSW-UMB, additional information may be made
available as manual updates. These updates are solely electronic and
serve as intermediary supplements prior to the release of a complete
technical documentation revision.
Check the Crestron website periodically for manual update availability
and its relevance. Updates are identified as an “Addendum” in the
Download column.
Installation Guide – DOC. 7590D
Universal Mounting Bracket: TSW-UMB • 9
Universal Mounting Bracket
Crestron TSW-UMB
Return and Warranty Policies
Merchandise Returns / Repair Service
1.
No merchandise may be returned for credit, exchange or service without prior authorization from
Crestron. To obtain warranty service for Crestron products, contact an authorized Crestron dealer.
Only authorized Crestron dealers may contact the factory and request an RMA (Return
Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name
and phone number of contact person, RMA number and return address.
2.
Products may be returned for credit, exchange or service with a Crestron Return Merchandise
Authorization (RMA) number. Authorized returns must be shipped freight prepaid to Crestron,
6 Volvo Drive, Rockleigh, N.J. or its authorized subsidiaries, with RMA number clearly marked
on the outside of all cartons. Shipments arriving freight collect or without an RMA number shall
be subject to refusal. Crestron reserves the right in its sole and absolute discretion to charge a 15%
restocking fee plus shipping costs on any products returned with an RMA.
3.
Return freight charges following repair of items under warranty shall be paid by Crestron,
shipping by standard ground carrier. In the event repairs are found to be non-warranty, return
freight costs shall be paid by the purchaser.
Crestron Limited Warranty
Crestron Electronics, Inc. warrants its products to be free from manufacturing defects in materials and
workmanship under normal use for a period of three (3) years from the date of purchase from Crestron,
with the following exceptions: disk drives and any other moving or rotating mechanical parts, pan/tilt heads
and power supplies are covered for a period of one (1) year; touch screen display and overlay components
are covered for 90 days; batteries and incandescent lamps are not covered.
This warranty extends to products purchased directly from Crestron or an authorized Crestron dealer.
Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any.
Crestron shall not be liable to honor the terms of this warranty if the product has been used in any
application other than that for which it was intended or if it has been subjected to misuse, accidental
damage, modification or improper installation procedures. Furthermore, this warranty does not cover any
product that has had the serial number altered, defaced or removed.
This warranty shall be the sole and exclusive remedy to the original purchaser. In no event shall Crestron
be liable for incidental or consequential damages of any kind (property or economic damages inclusive)
arising from the sale or use of this equipment. Crestron is not liable for any claim made by a third party or
made by the purchaser for a third party.
Crestron shall, at its option, repair or replace any product found defective, without charge for parts or labor.
Repaired or replaced equipment and parts supplied under this warranty shall be covered only by the
unexpired portion of the warranty.
Except as expressly set forth in this warranty, Crestron makes no other warranties, expressed or implied,
nor authorizes any other party to offer any warranty, including any implied warranties of merchantability or
fitness for a particular purpose. Any implied warranties that may be imposed by law are limited to the terms
of this limited warranty. This warranty statement supersedes all previous warranties.
10 • Universal Mounting Bracket: TSW-UMB
Installation Guide – DOC. 7590D
Crestron TSW-UMB
Universal Mounting Bracket
This page is intentionally left blank.
Installation Guide – DOC. 7590D
Universal Mounting Bracket: TSW-UMB • 11
Crestron Electronics, Inc.
15 Volvo Drive Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
www.crestron.com
Installation Guide – DOC. 7590D
(2038167)
07.14
Specifications subject to
change without notice.
Download PDF