Maxtor | Standalone DVR 2007 | User manual | Maxtor Standalone DVR 2007 User manual

KGUARD Standalone DVR KG-SHA116 User Manual
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
CONTENTS
SAFETY INSTRUCTIONS................................................................................................................. 1
CHAPTER 1. DVR FEATURES ......................................................................................................... 2
CHAPTER 2. LAYOUT ...................................................................................................................... 3
2.1. FRONT PANEL ............................................................................................................................... 3
2.2. REAR PANEL ................................................................................................................................. 4
2.3 REMOTE CONTROL ........................................................................................................................ 5
2.4 MOUSE OPERATION........................................................................................................................ 6
CHAPTER 3. DVR INSTALLATION ................................................................................................ 7
3.1. HARD DRIVE INSTALLATION .......................................................................................................... 7
3.2. CAMERA AND MONITOR CONNECTION ........................................................................................... 7
3.3. POWER SUPPLY CONNECTION ........................................................................................................ 7
CHAPTER 4. DVR BOOT UP ............................................................................................................ 8
4.1. SYSTEM INITIALIZATION................................................................................................................ 8
4.2. MAIN INTERFACE.......................................................................................................................... 8
CHAPTER 5. DVR MENU ................................................................................................................. 9
5.1. MAIN MENU PREVIEW .................................................................................................................. 9
5.2. MAIN MENU ................................................................................................................................10
5.2.1. Camera Setup.......................................................................................................................10
5.2.1.1. Color Setup....................................................................................................................10
5.2.2. Record Setup........................................................................................................................11
5.2.2.1. Record Mode .................................................................................................................11
5.2.2.2. Record Schedule Setup...................................................................................................11
5.2.2.3. Manual Recording..........................................................................................................12
5.2.3. Recording Search & Playback ..............................................................................................12
5.2.3.1. Search ............................................................................................................................12
5.2.3.2. Playback Interface..........................................................................................................13
5.2.3.3. Video Backup.................................................................................................................14
5.2.4 Device Management..............................................................................................................14
5.2.4.1. HDD Management .........................................................................................................14
5.2.4.1.1. HDD Format ...............................................................................................................15
5.2.4.2. Alarm Setup ...................................................................................................................15
5.2.4.3. Motion Detection Setup..................................................................................................17
5.2.4.4. PTZ Setup......................................................................................................................17
5.2.4.5. PTZ Control...................................................................................................................17
5.2.5. System Setup........................................................................................................................18
5.2.5.1. Time Setup.....................................................................................................................18
5.2.5.2. Password........................................................................................................................19
5.2.5.3. Video Setup....................................................................................................................20
5.2.5.4. Language .......................................................................................................................21
5.2.5.5. Info ................................................................................................................................22
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
5.2.5.6. System Maintenance ......................................................................................................22
5.2.6. Network Setup......................................................................................................................22
5.2.6.1. Intranet/LAN Access Setup ............................................................................................22
5.2.6.2. Internet Access Setup .....................................................................................................23
5.2.6.3. Ports...............................................................................................................................24
CHAPTER 6. NETWORK ACCESS .................................................................................................25
6.1. IE & NETVIEWER ACCESS ............................................................................................................25
6.1.1. IE Setup ...............................................................................................................................25
6.1.2. Connect to DVR...................................................................................................................26
6.1.2.1 IE Plug-in & Netviewer Interface ....................................................................................26
6.1.3. Control Network Access.......................................................................................................26
6.1.3.1 Live ................................................................................................................................27
6.1.3.2. Setup..............................................................................................................................27
6.1.3.3. Replay............................................................................................................................27
6.1.3.4. Convert 264 file to AVI file ............................................................................................27
6.1.3.5. Remote Backup..............................................................................................................28
6.1.3.6. PTZ Control...................................................................................................................28
6.1.3.7. Logout ...........................................................................................................................28
6.1.3.8. Playback Local File with Netviewer ...............................................................................29
6.2. MOBILE PHONES ACCESS .............................................................................................................30
6.2.1. Mobile Setup........................................................................................................................30
6.2.1.1. Install & Operate Mobile Client in Windows® Mobile Phones........................................30
6.2.1.2. Install & Operate Mobile Client in Symbian® Phones.....................................................32
6.2.1.3. Install & Operate Mobile Client in iPhone® ....................................................................34
6.2.1.4. Blackberry Handheld Application Installation Guide......................................................40
CHAPTER 7. SPECIFICATIONS .....................................................................................................43
CHAPTER 8. SYSTEM CONNECTION CONFIGURATION ........................................................44
CHAPTER 9. APPENDIX..................................................................................................................45
9.1 OPERATION FUNCTION TABLE .......................................................................................................45
9.2 RECORDING ALARM SETTING ........................................................................................................46
9.3. TROUBLESHOOTING .....................................................................................................................46
9.4. EMAIL SERVER CHECK LIST(THE BELOW INFO ONLY FOR YOUR REF.) .........................................47
9.5. USAGE MAINTENANCE.................................................................................................................47
9.6 USB DEVICE SUPPORT LIST ..........................................................................................................47
9.7 HDD DEVICE SUPPORT LIST .........................................................................................................48
9.8 3G CELL PHONE SUPPORT LIST .....................................................................................................49
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
Safety Instructions
1.
Use proper power source.
Do not use this product with a power source that applies more than specified voltage (100-240V AC).
2.
Never insert anything metallic into the DVR case.
Putting something into the DVR case can be a source of dangerous electric shock.
3.
Do not operate in wet & dusty area or use near water.
Avoid places like a damp basement or dusty hallway.
4.
Do not expose this product to rain or use near water.
If this product accidentally gets wet, unplug it and contact an authorized dealer immediately.
5.
Keep product surfaces clean and dry.
To clean the outside case of the DVR, use a cloth lightly dampened with water (no solvents).
6.
Do not attempt to remove the top cover.
If there are any unusual sounds or smells coming from the DVR, unplug it immediately and contact an
authorized dealer or service center.
7.
Do not attempt to remove the top cover.
Warning: You may be subjected to severe electrical shock if you remove the cover of the DVR.
8.
Handle DVR box carefully.
If you accidentally drop your DVR on any hard surface, it may cause a malfunction. If the DVR doesn’t work
properly due to physical damage, contact an authorized dealer for repair or exchange.
9.
Use standard lithium cell battery. (NOTE: Manufacturer has preinstalled battery.)
The standard lithium cell 3v battery located on the mother board should be replaced if the time clock does not
hold its time after the power is turned off. Warning: unplug the DVR before replacing battery or you may be
subjected to severe electrical shock. Properly dispose of old batteries.
10. Make sure there is good air circulation around the unit.
This DVR system uses a hard drive for video storage, which generates heat during operation. Do not block air
holes (bottom, upper, sides and back) of the DVR that cool down the system while running. Install or place this
product in an area where there is good air circulation.
1
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
Chapter 1. DVR Features
Real time monitoring
Supports real time surveillance via Monitor
Save Recordings
DVR saves real-time recording image to HDD
Backup Recordings
Supports DVR backup via USB flash drive and hard drive.
Playback Recordings
Supports DVR single CH and multiple CH playback of recorded files
Network operation
Supports remote surveillance by multiple users simultaneously
Alarm Setting
Supports HDD & video input alarm management and external alarm signal inputs
Mouse Operation
Supports Mouse operation for faster menu navigation.
PTZ Control
Supports PTZ camera operations through RS-485.
Other Features:
 H.264 real-time high compression and supports dual stream network transmission
 Graphics & Windows OSD interface
 ADPCM audio compression
 Supports pentaplex operation: live view, record, playback, backup and network transmission
 Supports backup & upgrade with USB flash disk
 Supports DDNS
 Supports audio transmission via network
 Selectable packing time for recorded files
 Supports editing camera title
 Supports adjusting image color
 Supports remote view with mobile phones based on Symbian S60 3rd/5th edition, Windows
Mobile, iPhone & Blackberry
 Supports VGA output (max. resolution: 1440×900)
 Alarm modes: video loss, HDD full, HDD loss ,Motion detection, Sensor triggered
 Email alert function
 With free-drag digital zoom function for live viewing
 Multiple languages OSD
 Supports auto maintenance
 Support to search system Log
2
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
Chapter 2. Layout
2.1. Front Panel
Item
Type
1
2
3
4
5
6
7
8
9
10
Channel
Select
&
numeric input
11
Preview
12
13
Audio control
Play Control
14
Rec.
15
16
17
18
19
20
21
Play Control
Direction
Key
Key
title
/Indicator
1 3 2
6 8 7
11 13
15 17 18 19 23 24
4
9
12 14
16
Marks
1
2
3
4
Single Channel
5
display
and
6
numeric key
7
8
9
0
DISPLAY
Multiple display
MODE
Mute key
MUTE
Pause

Manual
●
recording
Play

Stop

LEFT
/
UP

RIGHT
/
DOWN

CH-1 / Numeric key 1
CH-2 / Numeric key 2
CH-3 / Numeric key 3
CH-4 / Numeric key 4
CH-5 / Numeric key 5
CH-6 / Numeric key 6
CH-7 / Numeric key 7
CH-8 / Numeric key 8
CH-9 / Numeric key 9
CH-10 / Numeric key 0
CH11-CH16 select
method: press key 1
and plus other
numeric key.
Such as CH16
display, firstly press
1, and then press 6.
“On” or “Off” audio input/output
Pause / play frame by frame
Start Manual recording
22
Menu
MENU/ESC
23
HDD indicator
HDD
Power indicator
Power
Indicator
25
20 21 22 25
Quad display, 9-CH and 16-CH display
PTZ
24
10
Function
PTZ
Complex Key
5
IR Receiver
3
Enter into playback mode / Play button
Stop Playback / stop manual recording
Move leftward / Rewind
Move up
Move rightward / Play forward
Move down
Enter PTZ control, select [Enter] / [Edit]
operation
Enter into main menu / Exit
Continuous flicker indicates HDD is being
accessed
If the system is getting power, the indicator will
light
To receive signal from remote controller
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
2.2. Rear Panel
RS485/Sensor/Alarm port functions:
Alarm input: Connect [-] port of your sensor to G (GND) pin, and [+] port to channel input you want to set.
Alarm output: indicate the two ports marked “out”.
PTZ Port:Connect your camera to RS-485A and RS485B accordingly.
4
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
2.3 Remote Control
Key Title
Key Function
REC
Manual recording
SEARCH
Enter into recording search menu
2×2
Quad display
3×3
9-CH display
4×4
16-CH display
AUTO
Dwell time display
0~9
Channel select; numeric key
DISPLAY MODE
Multiple CH display (Quad, 9-CH, 16-CH and single
channel display)
▲
UP
▼
DOWN
◄/
Left/right key
ENTER
Select / Edit key; Enter key
Menu/ESC
Enter into main menu / Exit
PIP
PIP display mode
MUTE
Mute key
FWD
Forward(x2、x4、x8)
REW
Rewind(x2、x4、x8)
PLAY
Enter into recording search, play recording event
STOP
Manual stopping play
PAUSE/
FRAME
Pause / play frame by frame
SLOW
(1/2、1/4、1/8)Slow play
Z+
Zoom out video area
Z-
Zoom in video area
F+
Extend focus
F-
Extend focus
I+
Add PTZ brightness
I-
Decrease PTZ brightness
PTZ
Allow you set presetting bit and control PTZ.
LOCK
Lock system
5
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
2.4 Mouse Operation
You can use a mouse instead of front panel keys or remote control to navigate the operation of your DVR
Left button of Mouse
Right button of Mouse
In OSD menu, click left button to select & edit
In live display mode, clicking right key will display pop-up menu bar
In Main menu or sub menu mode, clicking right key will exit current menu.
Double-click Left button
of Mouse
double-click the live image of any channel for full screen display; by
double-clicking again, the display will return to display all cameras
Sliding Mouse
On motion mode, sliding mouse will select motion area; On [Color Setup] menu
mode, sliding mouse will adjust color control bar and volume control bar.
Using the Virtual Keyboard
When using the mouse, you can input certain values using the onscreen virtual keyboard.
You will need to use the Virtual Keyboard when entering your User ID and Password.
To use the Virtual Keyboard:
1. Click on an option or field, such as the User ID and Password fields.
2. Click 0~9 to enter the desired digit.
3. Click
to switch between numerals, upper and lowercase letters,
and other characters (only for certain options)
4. Click
to Backspace/Delete.
NOTE: The buttons will turn from orange to white when you select
the button with the mouse cursor.
5. Click
to enter/confirm and close the Virtual Keyboard.
6
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
Chapter 3. DVR Installation
3.1. Hard Drive Installation
Caution: Please do not Install or take out hard drive when DVR is running!
The model has a HDD drawer. Please use provided key to take out the HDD drawer and put HDD into
the drawer correctly.
(1) Remove screws and open DVR upper cover carefully;
(2) Insert Power Cord and data cable into Pin of hard drive securely;
(3) Put the upper cover back carefully, re-attach screws.
3.2. Camera and Monitor Connection
Connect camera cable to video input port of DVR, and from video output of DVR to Monitor via BNC
connector or VGA port (refer to system figuration on Chapter 9.6).
If the camera is a PTZ speed dome, you could connect RS485 A & B to the corresponding port on
DVR respectively (refer to system figuration on Chapter 9.6).
3.3. Power Supply connection
Please only use the power adapter supplied with the DVR.
7
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
Chapter 4. DVR Boot Up
4.1. System Initialization
After connecting the power adapter the system
will boot-up and start initializing.
4.2. Main Interface
After initialization, the system will display main
interface. When there are video inputs, live images
from the cameras will be displayed on screen. You
can use mouse to double-click the live image of any
channel for full screen display; by double-clicking
again, the display will return to display all cameras.
On the main interface, you will be able to see current
system date & time, channel title, recording status.
When there is no HDD installed in the DVR, or the
HDD is in abnormal working condition, system will
display “H” on screen.
Press Selection button on the front panel or click the right button of mouse, you will be able to see the
pop-up menu bar. It’s a short cut for your quick jump to menus in common use. Detailed method to
operate the pop-up menu bar will be introduced in relative chapter.
8
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
Chapter 5. DVR Menu
5.1. Main Menu Preview
Camera Title
Camera
Color setup
Record Quality
Record Solution
Record
Audio Record
Record Mode
Record Schedule
Record File Size
Network
DDNS Setup
Video Search
Main Menu
Search
Playback
File List
Backup
Log Search
HDD Management
Alarm Setting
Devices
E-mail Setup
PTZ Setting
Mobile Phone Setup
Motion
Area Setup
Time Setting
VGA Solution
User Password
TV System
Video Setting
Dwell Time Setup
System
Language Selection
Sequence Setup
System Information
System Volume Setup
System Maintenance
9
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
5.2. Main Menu
Press Selection button on the front panel or click the
right button of mouse to display pop-up menu.
Select MAIN MENU to enter main OSD menu.
Press ▲, ▼, ◄,
keys on front panel to move the
cursor, then press Selection key to enter selected
item.
Or use you mouse to select and enter menu.
Press ESC key or click right button of mouse to
return to previous window
5.2.1. Camera Setup
Name: You are able to edit the title of the camera with letter and number. Max. 8 characters.
Position: Edit the position to display the camera title on screen.
Live: Select to display live image or not. If you
select OFF, the image is still recorded and you can
see it in playback mode.
DISPLAY TIME WHILE IN LIVE VIEW: If you
select OFF, you will not be able to see the system
time display in live picture.
DISPLAY TIME WHILE RECORDING: If you
select OFF, you will not be able to see the system
time display in recorded picture while playing back.
Press APPLY icon to save your settings.
5.2.1.1. Color Setup
You can adjust image brightness, saturation,
contrast and hue settings for each channel.
Press ▲ & ▼ key on front panel to adjust the
value, or drag the bar to adjust with you mouse.
Press APPLY icon to save your settings.
10
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
5.2.2. Record Setup
Functions:
RECORD: ON/OFF option decides to record the
channel or not.
QUALITY: select recording video quality, higher
quality will need more HDD space to save the video.
RESOLUTION: decides the recording video
resolution. About the definition of resolution, please
refer to the specification chapter.
AUDIO: DVR supports to record 4 channels audio signal. Here you can bind the audio channel to an
appointed video channel for together recording.
Pack Time: System record and save the videos to HDD by separate files. It indicates the maximum
recoding length for every single continuous recording file (15, 30, 45, 60 minutes).
5.2.2.1. Record Mode
There are 2 record modes: ALWAYS & TIME SCHEDULE RECORD.
When you select ALWAYS record mode, DVR will execute continuous recording without stop.
When you select TIME SCHEDULE RECORD mode, DVR will execute recording according to
your schedule.
5.2.2.2. Record Schedule Setup
Select TIME SCHEDULE RECORD, a SCHEDULE
button will display. Click it and enter schedule setup
interface.
There are 3 recording status options:
ALARM [RED]: Motion detection mode
GENERAL [GREEN]: Continuous record mode
NO RECORD [Transparent]: Do not record
You are able to config 24 hours recording schedule for every channel or all channel from Sunday to
Saturday.
Steps:
1. Select Channel
2. Select a recording status among ALARM, GENERAL and NO RECORD
3. Move the cursor to the time point you want to set, click on the box in the schedule time line that
you want to apply the selected record type to.
11
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
4. If you want to change another recording status, repeat step 2 & step 3.
5. You can use copy function to fast complete your settings.
6. Press APPLY button to save your settings.
On the main interface, you will be able to check the recording status:
R: normal recording
M: motion detection recording
I: Sensor triggered recording
5.2.2.3. Manual Recording
There are 2 short cut menus listed in the Pop-up menu: START
RECORD and STOP RECORD. They are Manual record &
manual stop record buttons and the START RECORD function
only work when current recording mode is as following
recording status:
1. NO RECORD
2. ALARM, but the motion is no happening now.
The STOP RECORD function can only stop manual recording.
You can also press the RECORD and STOP keys on the front panel or remote controller to start and
stop manual recording.
5.2.3. Recording Search & Playback
You can enter search & playback interface by pop-up menu bar or main menu.
5.2.3.1. Search
Play back by exact date & time:
Modify the date & time, press PLAYBACK button to
play back video which is started from your appointed
date & time.
12
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
Search All Recorded File:
Press SEARCH button, system will search and show you
the recorded status. RED color indicates ALARM recoding,
GREEN color indicates continuous recording.
You can click the time point to play back.
System can play back 4 channels at the same time; you can
select any 4 channels to play.
File list
To check recoding event list, you can sort the files by Channel / Record Type (Normal Record / Alarm
Record)
FIRST: Turn to the first page
PREV: Turn to previous page
NEXT: Turn to next page
LAST: Turn to the last page
ALL: Select all files in current page
INVERSE: Allows you to revert the selected and
unselected events on the current page except those
you have currently selected.
5.2.3.2. Playback Interface
You can play video Forward at 2x, 4x, and 8x
speeds, Slow play at 1/2x, 1/4x, 1/8x, or normal
play, pause and play frame by frame using the
playback control bar, and adjust volume by clicking
or sliding tune control bar. When playback is
finished, system will return to previous menu.
13
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
5.2.3.3. Video Backup
1. Insert your USB device (USB hard disk, USB thumb drive) into the bottom USB port on the rear
panel.
2. Select one or more files
3. Press BACKUP button on the menu.
NOTE: Do not remove your USB device during making backup.
Note: Backup files will be in H.264 format, you can play them with Netviewer program, or convert
them to AVI format using the Netviewer program that comes with the DVR, so you can use any player
that supports AVI format. (Introduced on Chapter 6)
If your DVR comes with CD/DVD-RW, you can also burn the video into CD/DVD-ROM.
5.2.4 Device Management
Options in device management include
Hard drive, Alarm, PTZ control, Mobile
Phone Monitoring, and Motion Detection.
5.2.4.1. HDD Management
You will see the HDD information here.
STATUS: HDD working status
ALL/FREE: HDD capacity & HDD free space
FREE TIME: estimated recording length of the HDD free
space
OVERWRITE: If you select DISABLE, DVR will stop
recoding when HDD is full; if you select ENABLE, DVR
will continuous record and cover the oldest data when
HDD is full.
14
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
5.2.4.1.1. HDD Format
When a new HDD is installed into the DVR, the HDD
status will show “NOT FORMATED”. You need to
format the HDD otherwise the system cannot record.
Select the HDD(s) you want to format and then press
the FORMAT HDD icon to format the HDD(s).
Warning: If you format a HDD which is being
currently used, all data saved in the HDD will be lost!
System will restart automatically after formatting the HDD.
USB FORMAT: to format USB devices.
5.2.4.2. Alarm Setup
I/O STATUS: To select the connection type to match
your external sensor devices. You can select: NO:
Normal Open; NC: Normal Close; OFF.
HDD LOSS: Option to alarm or not when there is no
HDD installed in the DVR, or the HDD is in abnormal
working condition.
HDD SPACE: Option to alarm or not when HDD
space is full (if you have turned off the HDD overwrite
function).
VIDEO LOSS: Option to alarm or not when video signal loss.
ALARM OUTPUT: Option to select the alarm time for external alarm device
BUZZER: Option to select the alarm time for internal buzzer
DURATION:It determines the motion detection or sensor triggered recording length, which means
how long the motion detection or sensor triggered recording will still record after the events stop.
PreRec:Pre-recording function. Can be select 10S to pre-record for motion detection or sensor
triggered recording.
5.2.4.2.1. Email Alarm Notification
Warning: We don’t promise every email server is compatible with the DVR alarm
notification function. Please make sure your DVR is well connected to Internet if you want to
realize Email alarm function,
SSL is a security link transport protocol. You can encrypt your communication info (including
your email) using SSL to prevent hackers from monitoring your email or communication info and
even your password. Please confirm with your email service provider if your email server support SSL
or not.
15
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
Take GMAIL for example to demonstrate the email setting:
1. Set SSL to “On” via Gmail.com server, and set to “Off” via other mail server.
2. SMTP Port: indicates sender port of SMTP server. Generally the SMTP port value is 25, SMTP
port of G-mail server is 465.
3. SMTP: smtp.gmail.com
4. SEND EMAIL: dvrtest@gmail.com
5. SEND PW: enter the login password of send email
6. RECV EMAIL: The email address is used to receive image transmitted from motion detection
alarm of DVR.
7. Login your Gmail ID and turn to Settings page. Find out Forwarding and POP/IMAP option,
and then enable IMAP function.
16
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
5.2.4.3. Motion Detection Setup
STATUS: This option allows you enable motion
detection on the channels.
SENSITIVITY: This option allows you to set
sensitivity level of motion detection from 1 to 4
with 4 being the most sensitive.
MD AREA (motion detection area): Click this
button of the corresponding channel to select the
area you want to have motion detection. The
channel is separated into a 13*10 area. When any
movements in the selected area are detected,
recording or alarm will be triggered.
Red area: motion detection enabled
Transparent area: motion detection disabled
5.2.4.4. PTZ Setup
Select the channel you want to control and set
PTZ (Pan Tilt Zoom) protocol (Pelco-D or
Pelco-P), Baud Rate (1200, 2400, 4800, and
9600), Stop bit (1, 2), Parity Check (None,
Odd, Even Mark Space), Address Code and
Cruise status respectively. Please note the
above mentioned channel settings must match
the settings of the PTZ camera.
5.2.4.5. PTZ Control
You can find the PTZ control menu on the pop-up menu bar
and open the PTZ control interface. You can click Z+ & Zkeys to zoom In or out, click F+ & F- keys to control camera
focus and click I+ & I- to adjust the focus point.
17
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
Open auto cruise function on PTZ setting menu if you want to setup cruise function, and set up cruise
channel, cruise point, total quantity and stop time (by second) etc.
Channel: select the channel with the PTZ camera
TOTAL: set up presetting bit (angle) quantity. Please refer to
your camera’s manual for detail
CUR POINT: System has default starting (current) cruise
point as 01. You can use this option to set additional cruise
points
STOP TIME: sets the dwell time at each cruise point
GOTO: Select this option to go to specific preset points
5.2.5. System Setup
System Setup menu allows you to config time
setting, password setting, video system setting,
language selection. You can also check your
system information here, and upgrade the DVR
firmware with the menu here.
5.2.5.1. Time Setup
DATE: config the day, month, and year
DATE FORMAT: Select DD/MM/YYYY,
MM/DD/YYYY, or YYYY/MM/DD
TIME: config the time
TIME FORMAT: Use the drop-down menu and
select 12HOURS or 24HOURS
TIME ZONE: select your time zone
DST: (day saving time) Use the drop-down
menu to select ON/OFF to enable/disable
Daylight Savings Time.
Click APPLY button to save your settings.
18
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
5.2.5.2. Password
This option allows you set the device ID for
the DVR and set the system password if you
want to use one. Click APPLY button to save
the settings.
When you have enabled Password by setting the
option to “ON”, you can setup a user password
and administrator password respectively. The
password supports up to 6 characters. Click
“APPLY” to save the settings.
NOTE: Please write down your passwords and
store in a safe location. If you forget your
password, please contact our technical support
immediately.
Difference of USER PASSWORD and ADMIN
PASSWORD:
Login with USER PASSWORD, you can only
operate Search & Playback function, and view
the live images. You’re limited to check &
change any system settings.
Login with ADMIN PASSWORD, you will
have the authority to operate all menus.
5.2.5.2.1. Menu Lock
MENU LOCK menu only displays on the pop-up menu bar when
password protection is enabled.
When you exit the main menu, the system will remember your login
information for a while so that you don’t need to input the password
for your repeat login in a short time. You can use this menu to lock
your system menu immediately.
19
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
5.2.5.3. Video Setup
VIDEO SYSTEM: Select the TV system from
PAL and NTSC.
VIDEO PORT: keep default
VGA RESOLUTION: select the VGA video
output solution to match your VGA monitor
from 800x600, 1024x768, 1280x1024, and
1440x900.
SEQUENCE:
With this function, you can select SINGLE, QUAD, NINE and
SIXTEEN display mode.
Take NINE mode for example:
Turn ON the SEQUENCE, and then select NINE. Click the
SEQUENCE icon on the right side.
Select any 9 channels you want to display from the selection
box and then click APPLY to save your selection.
Turn back to main interface, you will only view the 9
channels you have selected. The channels you haven’t
selected will not be able to view.
NOTE: Recording wont’ be affected by this function. The
channels you cannot view still be able to record.
MULTIPICTURE:
You can select multi channel display mode from the Pop-up menu, or click the DISPLAY MODE
button on the front panel. On the Multiple Channels Display mode, you can select:
First Quad display (CH1~CH4), Second Quad display (CH5~CH8), Third Quad display (CH9~CH12),
Forth Quad display (CH13~CH16), First Nine CHs display (CH1~CH9), Second Nine CHs display
20
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
(CH10~CH16) and Sixteen CHs Display (CH1~16)
This mode will be disabled when the SEQUENCE display mode is ON.
DWELL TIME:
Allow system to display single channel in full screen or channel group by certain dwell time, and
auto-switch in sequence. You can set from 0 to 300 seconds. Setting “0” will disable auto-switch
display function.
Select START ROLLING on the Pop-up menu to active auto-switch display mode. System will
display picture(s) in sequence with the dwell time you have set.
During the auto switch displaying, you can use the MULTIPICTURE function to adjust display mode.
VOLUME:
Allow you to adjust the system volume if you have audio input(s).
MUTE:
You can also use the MUTE button on the Pop-up menu or MUTE key on the front panel & remote
controller to turn on or off the audio output.
5.2.5.4. Language
Select system OSD language.
System need to restart in order to complete the
language switch after you APPLY the change.
21
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
5.2.5.5. Info
You can check the system information, including
Device Type (model No.), Software (firmware)
version and MAC address.
5.2.5.6. System Maintenance
This option allows you reset the DVR to default
settings, update system software (firmware), and
config system auto-maintenance.
When the auto-maintain function is enabled, you
can set system to restart regularly to clear up
some temporary storage memory.
5.2.6. Network Setup
Your DVR supports to be remotely accessed via
network, so that you can remotely control the
DVR for monitoring, recording, playing back or
making backup. Prior to the remote access, you
need to set the network configuration at MAIN
MENU  NETWORK interface.
5.2.6.1. Intranet/LAN Access Setup
If your DVR is connected to a router of your LAN (local area network), then you can setup the
NETWORK Setup section of the DVR to view the image your DVR is recording remotely using
computers connected within your LAN.
Note: Prior to changing the NETWORK Setup of your DVR, it is strongly recommended that you
perform the following tasks:
22
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
1. Access the configuration page of your router.
2. Reserve an IP Address in your router that is not used by other computers or devices connected to
your internal network.
3. Write down the assigned IP Address of your DVR, Subnet Mask, IP Address of the router
(Gateway) your DVR connect to for future reference.
A. Select STATIC as the network TYPE.
B. Setup PORT (media port)
C. Input the WEB PORT (Must be different from
media PORT)
D. Enter the IP Address that you have reserved at the
beginning of this section into this field to be the
unique address of your DVR in your local network.
E. NETMASK: It is recommended to leave the
Subnet mask as the default 255.255.255.0.
F. Set the GATEWAY to the IP Address of your
router.
G. Enter the DNS (Domain Name Server) Address; set this to you router's IP address.
H. Click “APPLY” to save your change.
5.2.6.2. Internet Access Setup
Important Note: If you are using a DSL modem, the modem must be set to “bridge mode”.
Note: Before the NETWORK configuration, it is strongly recommended that you perform the
following tasks:
1. The DVR supports 3 common types of Internet Services: DHCP (Cable Modem), PPPoE (DSL
Modem) and Static IP (Fiber Optics). Please check with your ISP (Internet Service Provider) what kind
of service you are exactly using.
2. Write down the: IP Address (if your ISP is using Static IP), Subnet Mask, Gateway Address, DNS
Address provided by your ISP
If your ISP uses DHCP network, select DHCP network TYPE.
1. Input the PORT(media port)
2. Input the WEB PORT (Must be different
from media PORT)
3. Click the “DDNS SETUP” Button.
4. You will need to apply for a Dynamic
DNS account and register a Domain Name
with one of the known DDNS provider.
Enter your DDNS Provider’s HOST NAME,
USERNAME, and PASSWORD in the DDNS
SETUP page.
23
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
We recommend applying a free DDNS account at www.dyndns.org
If your ISP uses STATIC IP network, select STATCI network TYPE.
1. Input the PORT (media port)
2. Input the WEB PORT (Must be different from
media PORT)
3. Enter the IP Address that you have reserved at
the beginning of this section into this field to be
the unique address of your DVR in your local
network
4. NETMASK: It is recommended to leave the
Subnet mask as the default 255.255.255.0.
5. Set the GATEWAY to the IP Address of your
router.
6. Set the DNS (Domain Name Server) Address
to the IP Address of your router
7. Click “APPLY” to save your changes.
If you are using PPPoE dial-up network, select PPPoE network TYPE.
1. If your ISP provides you a Static IP Address, select
STATIC as the network TYPE.
2. Input the PORT (media port)
3. Input the WEB PORT (Must be different from media
PORT)
4. Enter your PPPoE NAME and PASSWORD so your
DVR will be able to obtain service from your ISP.
5. Enter the DNS (Domain Name Server) address.
6. You will need to apply for a Dynamic DNS (DDNS)
account and register a Domain Name with one of the
known DDNS provider. Enter your DDNS Provider’s HOST NAME, USERNAME, and PASSWORD
in the DDNS SETUP page.
5.2.6.3. Ports
Recommended media & web port input range: 1024 to 65535. If you want to visit your DVR from
internet, you must forward the ports used in the DVR network settings at the virtual server option of
your router.
24
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
Chapter 6. Network Access
There are 3 methods to remote access the DVR via network: Internet Explorer Browser (IE),
Netviewer client software & Mobile phones.
6.1. IE & Netviewer Access
You can use Netviewer client software & Internet Explorer (IE) 6.0 or newer version to remote access the DVR.
6.1.1. IE Setup
For the first time you are using the IE to access the DVR, you need to modify your browser controls
Take IE 7 for example to demonstrate how to modify your browser controls:
1. Turn OFF “Pop Up Blocker”
Go to Tools  Blocker, and then select “Turn Off Pop-up Blocker”.
2.
Access & Enable all ActiveX Controls
Go to “Tools”  “Internet Options” 
“Security” tab, then click “Custom
level…” button.
On this page scroll down to the ActiveX
Controls and Plug Ins, and set all to
either PROMPT or ENABLE.
Warning! It is strongly recommended to return all Internet Explorer Security to its default settings
25
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
after the ActiveX Control has been installed. Enabling all ActiveX controls put your computer at risk
of being attacked by computer virus.
6.1.2. Connect to DVR
To connect to the DVR from a remote computer, you would then open an Internet Explorer browser
window and enter the Internet IP of your router that you received by going to www.myipaddress.com.
If you get an error message “Program cannot load because the Publisher is unknown” or the program
is unsigned, then go to Internet Explorer --> Tools --> Internet Options, then click on the ADVANCED
tab on the top right. This will open the window in, scroll down to “Security”, and select on the options
to “Allow software to run or install even if the signature is invalid”, and “Allow Active Content to Run
Files on My Computer”.
Open Internet Explorer and enter the IP Address or DDNS address of your DVR. A pop-up will ask
you to install an ActiveX (plug-in) to your computer. Please confirm the download and install the
software.
Reminder: If the ActiveX (plug-in) is not downloaded successfully, please check if your browser’s
safety level or firewall setting is set properly (as stated above). Please also make sure all of the setup
of your modem or router is setup properly.
6.1.2.1 IE Plug-in & Netviewer Interface
Open the DVR IP address or DDNS
domain name with IE, or run the Netviewer
software, the LOGIN interface will load.
Input the login information, and then press
LOGIN button.
The default password is null.
After successfully Logged in, system will
open the live display interface and connect
to audio/video feed automatically.
You will be able to see the live images
transmitting from DVR.
6.1.3. Control Network Access
26
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
6.1.3.1 Live
1. On / Off Live display [
]: When the live display status is “On”, clicking the button to close live
display. When the live display status is “Off”, clicking the button to open live display.
2. Capture [
]: Capture Screen image and save to PC as *bmp image.
3. Recording [
]: Operate DVR recording remotely
4. Channel display [
]: The icons stand for Single Channel display, Quad Channel
display, 3x3 Channel display and 4x4 Channel display respectively.
5. Volume control [
]: Click or slide the control bar to adjust sound volume.
6.1.3.2. Setup
Click “SETUP” on the top menu bar to set DVR system configuration. You can set “Recording Mode”,
“Alarm Mode”, “PTZ Control”, “Network Setting”, “System Setting” and check “Host Info” here.
Please refer to chapters 5 about how to set the DVR system configuration mentioned above.
6.1.3.3. Replay
This option allows you to playback
recordings remotely.
1. Select the day, channel and type
then proceed searching and reload.
2. Select any event from search
result list to playback.
Play: Play and Pause
Stop: stop playing recording
F.F.: fast forward playback recording
Slow: slow playback recording
Next Frame: play frame by frame
264 TO AVI button: convert file from H.264 format to AVI format
6.1.3.4. Convert 264 file to AVI file
The native format of the backup files is H.264, you can convert H.264 format into AVI format by
clicking the key of 264 to AVI.
1. Click the “264 TO AVI” button, the AVI Convert window will open.
2. Determine the source H.264 file & the destination to save the avi file.
3. Click CONVERT. File conversion begins. The progress bar indicates the status of the conversion.
4. Click OK in the confirmation window.
27
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
6.1.3.5. Remote Backup
You can backup recorded video files from DVR to your PC using the Replay menu in the remote
surveillance software.
To backup files remotely:
1. Click REPLAY at the top of the main screen.
2. Select a date on the calendar and click RELOAD.
3. Double-click a file from the File List to begin playback.
4. Click BACKUP. Backup begins to C:/DVR/[ip address]/Backup
NOTE: If you playback a file, you must wait for the file to load before backing it up, otherwise you
may receive an error message
When file backup is complete, click OK in the confirmation window. The confirmation window show
the save path of the backup file. The backup files are saved as .264 files.
6.1.3.6. PTZ Control
1. PTZ direction control: Control PTZ moving direction
2. Zoom, Focus and Iris Control: control direction, zoom, focus and iris of PTZ.
3. Presetting bit Control
CUR: display current presetting bit or input a presetting bit you would like to fix at according to the
edit box.
Load: Load one previous setting you have saved last time.
Save: Save setting.
Set: Set presetting bit parameter
GOTO: on the preview mode, please input a setting for presetting bit no and click “GOTO” button to
preview the setting.
Clean: clear presetting bit setting
Cruise: control cruise status (including on and off).
6.1.3.7. Logout
Log out the system.
28
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
6.1.3.8. Playback Local File with Netviewer
Run the Netviewer software, you will see the OFFLINE button displayed on the Login interface.
Press this button to enter local file playback mode.
Press the ADD button to add backup H.264 files or folder saved in your computer, you will see the
files will be listed in the queue window, select a file then press PLAYFILE button to play.
29
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
6.2. Mobile Phones Access
This function allows you to view 1 channel live image at the same time with your mobile phone.
The DVR is currently compatible with mobile phones running Windows® Mobile, Symbian® S60
3rd/5th Edition operating systems, iPhones® and Blackberry® on GPRS and/or 3G networks.
6.2.1. Mobile Setup
Before you can view the live image from your DVR with compatible mobile phones, you need to set
the settings first. Please also make sure your DVR has well connected to Internet.
Go to MAIN MENU  DEVICIE  MOBILE, config the mobile phone login settings
USER NAME: is the user name to enter when
logging into the DVR.
USER PASSWORD: is the password to enter
when logging into the DVR.
SERVER PORT: Mobile monitoring port.
Setting range is between 1024 and 65535. Please
note that the server port number must be
different from the network ports you have
appointed in the NETWORK settings.
NOTE: You also need to forward this port at
the virtual server option of your router.
6.2.1.1. Install & Operate Mobile Client in Windows® Mobile Phones
1. Install the webcam program that is included on the supplied CD by copying the
“window_mobile.CAB” file to the mobile phone. You can do this by attaching the mobile phone to a
computer and copying the file from the CD to the phone.
2. Click the windows mobile folder and choose the file “window_mobile”. Select the file which will
open the window. The file is generally default to save to the Device’s built-in memory, but you can
choose to save it to Storage Card.
30
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
3. Choose storage location and click “Install” to start the installation.
4. After installation finishes, click the icon named window mobile to run the program. This will
display the program screen.
5. Click the “Setting” button to enter the Setting menu.
User name: same as user name setup in DVR MOBILE setup
Password: same as password setup in DVR MOBILE setup
Server: DVR’s public IP address or DDNS domain name
Web port: Same as the Server Port you setup in DVR MOBILE setup
Channel: Select the channel you want to monitor and click “OK” to display the screen to start viewing
the live image.
6. To stop viewing the live video, click the “Disconnect” button or click the “Setting” button to modify
the settings.
Function of Buttons under the video image from left to right: PTZ control (Left, Right, Up and Down),
area select (Zoom out and Zoom in), Focus (Add “+” and deduct “-”) and Iris (Add “+” and deduct “-”)
and Snap to capture screen image.
31
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
6.2.1.2. Install & Operate Mobile Client in Symbian® Phones
1. Install the webcam program that is included on the supplied CD by copying the “Symban_3.0.sisx”
(Symbian 3.0 version) or “Symbian_5.0.sis” (Symbian 5.0 version) file to the mobile phone. You can
do this by attaching the mobile phone to a computer and copying the file from the CD to the phone.
2. Select the Symbian_3.0/Symbian_5.0 icon in this window to install it.
3. After the phone finishes copying the file, it will ask for permission to install the program. Select
“Yes” to start the installation.
``
4. Click the “Continue” button on the information box displaying the program and current version.
5. Select the location of where you want to install the program, to phone memory or to the memory
card, and then click “Select”.
32
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
6. Click “Continue” and wait for the program to install.
5. Once the installation is complete, go to the Applications folder and select the “Symbian_5.0”
program, and click “Open” to display the settings menu.
Default Access Point:Input the access point. System default for the access point is GPRS connection.
Server Address: DVR’s public IP address or DDNS domain name
Server Port:Same as the Server Port you set in the DVR under section 5.2.10.4.
User name: same as user name setup in DVR MOBILE setup
Password: same as password setup in DVR MOBILE setup
Web port: Same as the Server Port you setup in DVR MOBILE setup
Channel: Select the channel you want to monitor and click “DONE” to display the screen to start
viewing the live image.
Channel select, PTZ control, Zoom in/out, Focus and Iris
33
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
6.2.1.3. Install & Operate Mobile Client in iPhone®
Step 1: Download iTunes
Visit Apple website http://www.apple.com/itunes/ to download & install the iTunes.
Step 2: Download & install surveillance software “Aplayer”
2.1 Register iTunes Store
2.1.1 Run the installed iTunes, you might need to create an account to visit iTunes store firstly. Move
to the menu “Store”, and click the option “Create Account”.
2.1.2 Continue
34
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
2.1.3 Select & continue
2.1.4 Fill in your personal info & continue.
Please note that the options of Payment Method are different from different regions, please
select another payment method. Don’t worry, “Aplayer” is free software & you don’t need to
pay for it.
2.1.5 Finished the register, and go to your email box to verify your account.
**
35
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
Click the link included in the email message.
It will connect to the iTunes store and turn to iTunes interface.
Sign in your account.
The register of your iTunes store account has been done.
36
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
2.2 Authorize Computer
You need to authorize your computer with the registered ID.
Move to the menu “Store”, and click the option “Authorize Computer”.
Input your registered ID & password, then click Authorize button.
2.3 Download & install “Aplayer” into your iPhone
2.3.1 Click iTunes Store(1), then input “aplayer” into the search bar(2) on the right upper corner and
press Enter.
2
1
You will find the Aplayer icon displayed as below.
37
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
2.3.2 Click the icon and it will turn to the download page. Click the “GET APP” button to download
the file.
You will find the downloaded file on the directory of Application
2.3.3 Connect your iPhone to the computer, you will find your Device displayed on the left sidebar.
Select the DEVICES ID(1), and then click “Applications” option(2). Select the “Sync Applications” &
“Aplayer” (3) and then click “Sync” button(4).
2
3
4
1
38
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
The devices ID is different from different iPhones.
After finishing the sync, you will find the Aplayer Icon on your iPhone
Step 3: Setup & run “Aplayer”
Main interface of Aplayer & function keys:
Ⅰ. Direction keys of PTZ control
Ⅱ. Zoom+ & ZoomⅢ. Focus+ & FocusⅣ. Iris+ & IrisⅤ. Channel selection keys
Ⅵ. Play & Pause
Ⅶ. Snapshot
Ⅷ. Full screen
Ⅸ. Next group of channels
Ⅹ. Setup
Ⅰ
Ⅵ
ⅡⅢⅣ
Ⅶ
Ⅷ
Ⅸ
Ⅴ
Ⅹ
3.1 Access information setup
Turn into setup menu, and fill in the information according to your DVR Mobile settings.
Server IP: input the IP address or domain name to visit your DVR
Port: same with the server port you have set in your DVR mobile settings
User ID: same with the user name you have set in your DVR mobile
settings
Password: same with user password you have set in your DVR mobile
settings
After finishing the settings, press “Back” button to the main interface.
Press Play button to start mobile surveillance.
Press channel selection keys to switch camera picture.
39
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
6.2.1.4. Blackberry Handheld Application Installation Guide
1.
2.
3.
4.
Install the Blackberry desktop manager on the computer;
Connect the handheld to computer using the USB port;
Open the Blackberry desktop manager;
Select the [Application Loader] item in the main menu;
5. Click the start button on the [Add / Remove Application] side;
40
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
6. Browse and open the [*.alx] file then click [Next];
7. Just click the [Finish] button to complete the installation.
41
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
The startup shortcuts are usually located in the Downloads directory.
Main screen of the application.
42
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
Chapter 7. Specifications
Model
KG-SHA116
Video Compression
H.264
Video System
NTSC / PAL
Operation System
Video Input /
Output
Audio Input / Output
Linux
Audio Compression
8kHz*16bit ADPCM
Display Frame Rate
PAL: 400 fps / NTSC: 480 fps
PAL: CIF(352x288), HD1(704x288), D1(704x576)
NTSC: CIF(352x240), HD1(704x240), D1(704x480)
PAL: 100fps@D1, 200fps@HD1, 400fps@CIF
NTSC: 120fps@D1, 240fps@HD1, 480fps@CIF
Always / schedule (motion detection / sensor triggered / manual)
Playback Resolution
Recording Frame Rate
Recording Mode
BNC 16-channel / VGA 1-channel & BNC 2-channel
BNC 4-channel / 1-channel, 1channel spot out
Network Interface
15/30/45/60mins file time selectable
One removable HDD tray and one fixed HDD rack, support up to 2TB SATA HDD
each
RJ45, 10M/100M
Network Protocol
Support TCP/IP, DHCP,DDNS, PPPoE
Network Function
Support to live view with IE (Internet Explorer) & with mobile phone
USB2.0
Playback Search
USB mouse, USB disk (backup, upgrade)
Local: Playback 4 channels at the same time
network: 1-channel
Date/ time, file list
Playback Mode
PLAY / SLOW / FWD / Frame by frame
Backup
Backup via USB flash disk, USB HDD disk, USB CD/DVD-RW & Network
PTZ Control
Built-in RS485, support PELCO-P & PELCO-D
Alarm Mode
Motion Detection, video loss, HDD loss, HDD full, Email, sensor triggered
Power Supply
DC 12V/5A (power adaptor included)
Power consumption
10-15 W (exclude HDD)
Working Temperature
50°F to 104°F (10℃ to 40℃)
Dimension
430x380x70mm (WxDxH)
Weight
Approximate 6kg
Recording Pack Time
HDD Interface
Playback
43
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
Chapter 8. System Connection Configuration
44
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
Chapter 9. Appendix
9.1 Operation Function Table
Type
Title
Description
Page
Time setting
Setting system date, time and format and day-light saving time setting
18
Setting system language
21
Language Select
CH Setting
Setting CH title and position; adjusting image color parameter value; setting CH
display to ON / Off and time display/recording time overlaying to On/Off.
10
Rec. Setting
Setting image quality, resolution, volume, recording mode an pack time
11
Rec. Search
Time based search, channel based search and rec. mode based search.
12
Rec. Playback
Specified time playback, scheduled playback, file list playback
13
Playback mode
Play, play frame by frame, multi-speed forward and multi-speed rewind
13
File backup
U flash disk and removable HDD backup, DVD recorder backup and network download backup
11
HDD Manage
Check HDD status, usage space, setting HDD auto-overwrite
14
VID/AUD Setting
Adjust VGA resolution, select system and volume control
20
User password
Setting or modifying user password
19
Alarm setting
Setting HDD lost, HDD space, video loss, I/O status, alarm management and Email alarm
15
Motion detection
Setting on/off status of MD; select sensitivity and setting motion detection area.
17
Advanced
PTZ control
Selecting CH and setting PTZ protocol, baud rate and PTZ address for the CH
17
Setting
Mobile Phone Monitor
Setting user name, password and server port.
30
Principle
Setting
System Maintenance
Network
Setting
Network
Function
Setting system auto maintenance, maintenance time regularly, system upgrade,
ex-factory default value recovery and manual restart system
function
20
Display Control
PIP, ZOOM IN/OUT, Multiple Images display, Dwell time display and Cruise display
Network and Port
Selecting network mode and setting net-viewer port, web port, DNS and DDNS
setting
parameters.
Live display
Real time video input remotely
27
Remote recording
Setting recording mode and status of DVR remotely
27
Remote playback
Check local recording history via network
27
PTZ control
Remotely control PTZ camera, position, focus, zoom and iris etc.
28
parameter set of DVR
Setting local CH display, recording, alarm, PTZ control parameter value via network
remotely
Auxiliary
22
25
27
Network download
Backup recording file via network
28
System info
Check device model, software version and MAC address
22
()
In addition to illustrating picture, Parenthesis generally indicate optional parameter
value of previous menu.
Menu
button
Confirm
The button allows you save the modification of parameter value.
Recover default
The button allows you recover default value of
The option will be effective once confirmation
current menu or system
Exit
Exit current menu
45
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
9.2 Recording Alarm setting
Please refer the below matrix: “ ⊥” stand for “only alarm but no recording”; “AMR” stand for “alarm recording”;
“NLR” stand for “normal recording”; and “NOR” stand for “ no recording”. Once alarm is triggered, alarm icon will
occur, and when many alarms are triggered, alarm remarks will occur on the screen.
Recording Mode
Timing recording
Recording alarm setting
Alarm icon
Recording after
Manual Recording
power on
AMR NLR NOR
Alarm
mode
MD alarm
I/O triggered alarm
HDD loss, HDD space full
Video Loss
Video Loss
AMR
AMR
⊥
⊥
AMR
AMR
⊥
⊥
NLR
NLR
⊥
⊥
⊥
⊥
⊥
⊥
NLR
NLR
⊥
⊥
When DVR is in recording mode, [ ] icon or [ ] icon will appear on the screen. But when there are [ ] icon and
[ ] icons on the screen it indicates a motion alarm was triggered. When [ ] icon appears on the screen, that mean a
hard drive alarm has occurred..
9.3. Troubleshooting
1. Q: What can I do if the system does not detect the HDD?
A: Check the data and power cables and make sure they are securely connected.
2. Q: We have changed the password but do not remember the new password, how can we access the system?
A: If you forget system password, enter 0800808 into the password field to reset the password
3. Q: We are not getting any video signal on the DVR, what is wrong?
A: Check to make sure the cables are securely connected to the BNC ports on the DVR. You can also try another
cable to make sure there is not a problem with the cable. Make sure you have selected the correct video format for
your country (NTSC or PAL), is the USA we use NTSC.
4. Q: Can the DVR have problems if it gets too hot, how can I prevent this?
A: The DVR has a fan to help it dissipate heat while it is working. Please place the DVR in a place where there is
good air circulation and away from high temperatures to increase stability and life of the DVR.
5. Q: My remote control does not work when the DVR is in Live mode but the front panel buttons are working, what
is wrong?
A: Make sure nothing is blocking the LED on the remote or the receiver on the DVR, if both are ok, check the
batteries.
6. Q: Can I use the hard drive from my PC in the DVR?
A: You can if the hard drive is the same type and the size is supported by the DVR. If you install it in the DVR it
will be formatted for use in the DVR and the PC will not be able to read it.
7. Q: Do I have to stop recording to playback files on the DVR?
A: No you do not have to stop recording, the DVR will support both functions at the same time.
8. Q: Can I erase files from the hard drive of the DVR?
A: You can not erase individual file, you would need to format the hard drive which will erase all of the files
9. Q: Why can’t I log-in to the Net-viewer program?
A: Please verify that the Net mode is correct, the cable to the RJ-45 port is well connected to the DVR and the
router, and that you are using the correct password.
10. Q: We have attached a PTZ camera but can not control it, what is wrong?
A: Verify that the Protocol, baud rate, address, and other settings on the PTZ camera match the settings you have
put into the DVR. Make sure the data cables are attached firmly to the RS485 port on the DVR.
11. Q: Why does the Buzzer keep sounding?
A: Please check to see if motion detection is on and the system has detected motion, make sure the hard drive is
being detected and has sufficient space available and that none of your cameras have lost video. You can turn off
the buzzer in the Alarm setup option.
46
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
9.4. Email server check list(The below info only for your ref.)
(Web site)
www.yahoo.com
www.google.com
Email address
Sender server(25)
Receiver server(110)
@yahoo.com.tw
smtp.mail.yahoo.com.tw
pop.mail.yahoo.com.tw
@yahoo.com
smtp.mail.yahoo.com
pop.mail.yahoo.com
@gmail.com
smtp.gmail.com(465/587)
pop.gmail.com(995)
9.5. Usage Maintenance
1.
2.
3.
4.
5.
Please make sure DVR keep away from heating source.
Clean the internal dust regularly, keep DVR aeration well and be easy to heat dissipate.
Please not plug in RS-232 and RS-485 when power is on to avoid any damage to the port.
Please check the HDD cable and data cable to avoid the cable aging.
Please avoid other electronics device interfere video/audio signal of DVR a.s.a.p., or static electricity and
induced voltage damage to DVR.
6. Suggest user replace BNC cable regularly to keep signal input stable.
9.6 USB Device Support List
Brand
Netac
Sandisk
Kingston
Kingston(DT Mini Slim)
Newsmy
Transend
Kingmax
DekTec
Apacer
PNY
SSK
TELECT
UNIS
U2.0 USB Device Support Suggestion
Capacity
1G
2G
2G
2G
4G
8G
16G
4G
1G
2G
1G
2G
8G
1G
8G
1G
1G
2G
4G
16G
1G
4G
47
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
9.7 HDD Device Support List
Brand
Seagate
WD
Maxtor
Hitachi
Samsung
SHA Series – SATA HDD Support Suggestion
Model No.
Note
Capacity
80G
ST380815AS
160G
ST3160815SV
ST3250310SV
ST3250410AS
250G
ST3250312CS
ST3250310SV
320G
ST3320410SV
ST3500312CS
ST3500320AS
Special design for Standalone DVR.
500G
ST3500320SV
ST3500320NS
Special design for Standalone DVR.
ST3500410SV
750G
ST3750330SV
1T
ST31000322CS
1T
ST31000340NS Special design for Standalone DVR.
1.5T
ST31500341AS
WD800BD-08MRA1
80G
160G
WD1600AAJS
Special design for Standalone DVR.
WD2500AVJS
250G
WD2501ABYS
WD3200AJJS
WD3200AVVS
320G
Special design for Standalone DVR.
WD3200AVJS
WD3200AAJS
WD5000AVVS
500G
WD5000AAKS
WD10EVDS
1T
WD10EVVS
WD1001FALS
2T
WD200FYPS
80G
STM380211AS
320G
STN380215AS
160G
HDS721616PLA380
250G
HDP725025GLA380
320G
HDT725032VLA360
500G
HDP725050GLA360
750G
HDS721075KLA330
1T
HDE721010SLA330
80G
HD080HJ
48
www.kguardsecurity.com
KGUARD Standalone DVR KG-SHA116 User Manual
160G
500G
HD161HJ
HD501IJ/CNG
9.8 3G Cell Phone Support List
3G Cell phone Support Suggestion
Brand
Nokia
Motorola
Sony Ericsson
Samsung
HTC
Apple
Blackberry
Model No.
N70
N73
N95
E65
V3x
E770
SE K600i
SE k700i
SE 700i
SE 800i
Z610i
SGH 400
TyTNII
CHT9000
iPhone
9000
9530
9630
Note
PDA Phone
49
www.kguardsecurity.com
The material in this document is the intellectual property of our
department .
No part of this manual may be reproduced, copied, translated,
transmitted, or published in any form or by any means without our
department prior writt en permission.
Our products are under continual improvement and we reserve the right t o
make changes without noti ce. But no guarantee is given as to the correctness
of its contents.
We do not undertake any responsibility for the harms cause by using our
product.
The model of the products in the user's manual only for recognition, but
these names also perhaps are belong t o other company's registered
trademark or the copyright.
The product picture may differ from the actual product, only for your
reference. The accessories will probably be different according to the
different selling areas. For details of accessories, please refer to your local
distributor.
C op yright r eserve d
Download PDF