Chauvet | COLORdash Par-Tri 18VW | User manual | Chauvet COLORdash Par-Tri 18VW User manual

User Manual
Edition Notes
Edition Notes
This User Manual Rev. 2 covers the description, safety precautions, installation,
programming, operation, and maintenance of the COLORdash™ Par-Tri 18VW.
CHAUVET® released this edition of the COLORdash™ Par-Tri 18VW User Manual
Rev. 2 in December 2013.
Trademarks CHAUVET® is a registered trademark of CHAUVET & Sons Inc. (d/b/a CHAUVET® or
Chauvet). The CHAUVET® logo in its entirety including the CHAUVET® name and the
dotted triangle, and all other trademarks in this manual pertaining to services, products,
or marketing statements (example: It’s Green Thinking™) are owned or licensed by
CHAUVET®. Any other product names, logos, brands, company names, and other
trademarks featured or referred to within this document are the property of their
respective trademark holders.
Copyright Notice CHAUVET® owns the content of this User Manual Rev. 2 in its entirety, including but not
limited to pictures, logos, trademarks, and resources.
© Copyright 2013 CHAUVET®. All rights reserved.
Electronically published by CHAUVET® in the United States of America.
Manual Use CHAUVET® authorizes its customers to download and print this manual for professional
information purposes only. CHAUVET® expressly prohibits the usage, copy, storage,
distribution, modification, or printing of this manual or its content for any other purpose
without written consent from CHAUVET®.
Document Printing For better results, print this document in color, on letter size paper (8.5 x 11 in), doublesided. If using A4 paper (210 x 297 mm), configure your printer to scale the content
accordingly.
Intended Audience Any person in charge of installing, operating, and/or maintaining this product should
completely read through the guide that shipped with the product, as well as this manual,
before installing, operating, or maintaining this product.
Disclaimer CHAUVET® believes that the information contained in this manual is accurate in all
respects. However, CHAUVET® assumes no responsibility for any errors or omissions
in this document. CHAUVET® reserves the right to revise and make changes to the
content of this document without obligation that CHAUVET® notify any person or
company of such revision or changes. This does not in any way constitute a
commitment by CHAUVET® to make such changes. CHAUVET® may issue a revision
of this manual or a new edition to incorporate such changes.
Author
Date
Editor
Date
D. Couppe
12/12/13
A. Leon
12/12/13
COLORdash™ Par-Tri 18VW User Manual Rev. 2
Table of Contents
Table of Contents
1. Before You Begin ...................................................................................................................................... 1
What Is Included ........................................................................................................................................................... 1
Claims .......................................................................................................................................................................................... 1
Manual Conventions .................................................................................................................................................................... 1
Symbols ....................................................................................................................................................................................... 1
Safety Notes ................................................................................................................................................................. 2
Personal Safety ............................................................................................................................................................................ 2
Mounting and Rigging .................................................................................................................................................................. 2
Power and Wiring ......................................................................................................................................................................... 2
Operation ..................................................................................................................................................................................... 2
Expected LED Lifespan ................................................................................................................................................ 2
2. Introduction ............................................................................................................................................... 3
Description .................................................................................................................................................................... 3
Features ........................................................................................................................................................................ 3
Overview ....................................................................................................................................................................... 4
Dimensions ................................................................................................................................................................... 5
3. Setup .......................................................................................................................................................... 6
AC Power ...................................................................................................................................................................... 6
AC Plug ........................................................................................................................................................................................ 6
Power Linking ............................................................................................................................................................... 6
Fuse Replacement ....................................................................................................................................................................... 6
DMX Linking.................................................................................................................................................................. 7
DMX Modes ................................................................................................................................................................................. 7
Master/Slave Connectivity............................................................................................................................................................ 7
Mounting ....................................................................................................................................................................... 8
Orientation ................................................................................................................................................................................... 8
Rigging ......................................................................................................................................................................................... 8
4. Operation ................................................................................................................................................... 9
Control Panel Description ............................................................................................................................................. 9
Control Options ............................................................................................................................................................. 9
Programming ................................................................................................................................................................ 9
DMX Personality .......................................................................................................................................................................... 9
DMX Control................................................................................................................................................................................. 9
Static Color ................................................................................................................................................................................ 10
Auto Programs ........................................................................................................................................................................... 10
Product Information .................................................................................................................................................................... 10
Master/Slave .............................................................................................................................................................................. 10
White Balance ............................................................................................................................................................................ 10
Display Backlight ........................................................................................................................................................................ 11
Dimmer Curves .......................................................................................................................................................................... 11
Menu Map ................................................................................................................................................................... 12
DMX Values ................................................................................................................................................................ 13
5. Technical Information ............................................................................................................................. 14
Product Maintenance .................................................................................................................................................. 14
Returns ....................................................................................................................................................................... 14
Technical Specifications ............................................................................................................................................. 15
Contact Us .................................................................................................................................................................. 16
COLORdash™ Par-Tri 18VW User Manual Rev. 2
-i-
Before You Begin
1. Before You Begin
What Is Included
· COLORdash™ Par Tri-18 VW
· powerCON® power cord
· Accessory holder
· Gel frame
· Warranty card
· Quick Reference Guide
Claims Carefully unpack the product immediately and check the box to make sure all the parts
are in the package and are in good condition.
If the box or the contents (the product and included accessories) appear damaged from
shipping or show signs of mishandling, notify the carrier immediately, not CHAUVET®.
Failure to report damage to the carrier immediately may invalidate your claim. In
addition, keep the box and contents for inspection.
For other issues, such as missing components or parts, damage not related to shipping,
or concealed damage, file a claim with CHAUVET® within 7 days of delivery.
Manual Conventions
Convention
Meaning
1~512
A range of values in the text
50/60
<SET>
A set of mutually exclusive values in the text
A button on the product’s control panel
A product function or a menu option
A sequence of menu options
A range of menu values from which to choose in a menu
A set of two mutually exclusive menu options in a menu
Settings
MENU>Settings
1~10
Yes/No
ON
A unique value to be entered or selected in a menu
Symbols
Symbols
Meaning
Critical installation, configuration, or operation information.
Failure to comply with this information may cause the product not
to work, damage third-party equipment, or cause harm to the
operator.
Important installation or configuration information. Failure to
comply with this information may keep the product from working.
Useful information.
The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data
transmission protocol.
COLORdash™ Par-Tri 18VW User Manual Rev. 2
-1-
Before You Begin
Safety Notes
Read all the following Safety Notes before working with this product. These notes
include important information about the installation, usage, and maintenance of this
product.
This product contains no user-serviceable parts. Any reference to servicing in
this User Manual Rev. 2 will only apply to properly trained CHAUVET® certified
technicians. Do not open the housing or attempt any repairs.
All applicable local codes and regulations apply to proper installation of this product.
Personal Safety
· Avoid direct eye exposure to the light source while the product is on.
· Always disconnect this product from power before servicing.
· Always connect this product to a grounded circuit to avoid the risk of electrocution.
· Do not touch this product’s housing when operating because it may be hot.
Mounting and
Rigging
· DO NOT operate this product outdoors or in any location where dust, excessive
heat, water, or humidity may affect it.
· When hanging this product, always secure to a fastening device using a safety
cable.
· Always use the hanging/mounting bracket to carry this product.
· Do not leave any flammable material within 50 cm of this product while operating.
Power and Wiring
· Always make sure you are connecting this product to the proper voltage in
accordance with the specifications in this manual or on the product’s specification
label.
· Never connect this product to a dimmer pack or rheostat.
· Never disconnect this product by pulling or tugging on the power cable.
Operation
· Do not operate this product if you see damage on the housing, lenses, or cables. In
any of these cases, have the damaged parts replaced by an authorized technician
at once.
· Do not cover the ventilation slots when the product is operating to avoid internal
overheating.
· The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate this
product at a higher temperature.
· In case of a serious operating problem, stop using this product immediately!
In the unlikely event that your CHAUVET® product may require service, contact
CHAUVET® Technical Support.
Expected LED
Lifespan
-2-
LEDs gradually decline in brightness over time, mostly because of heat. Packaged in
clusters, LEDs exhibit higher operating temperatures than in ideal, single-LED
conditions. For this reason, using clustered LEDs at their fullest intensity significantly
reduces the LEDs’ lifespan. Under normal conditions, this lifespan can be 40,000 to
50,000 hours. If extending this lifespan is vital, lower the operating temperature by
improving the ventilation around the product and reducing the ambient temperature to
an optimal operating range. In addition, limiting the overall projection intensity may also
help to extend the LEDs’ lifespan.
COLORdash™ Par-Tri 18VW User Manual Rev. 2
Introduction
2. Introduction
Description
Features
The COLORdash™ Par-Tri 18VW is powered by 18 tri-colored CW LEDs in a compact
and durable housing. A split-yoke bracket eliminates the need for floor stands. Power
linking, as well as 3- and 5-pin DMX connectors simplify connections and setup. The
COLORdash™ Par Tri-18 also includes an accessory holder and a gel frame.
· Operating modes:
· 2-channel: WW, CW
· 3-channel: Dimmer, WW, CW
· 7-channel: Dimmer, WW, CW, strobe, auto, auto speed, dim mode
· Silent flicker free operation
· Lightweight, easy to install
· 16 bit dimming with selectable dimming curves
· Pre-built auto programs
· All metal construction for added durability
· Even distribution of light
COLORdash™ Par-Tri 18VW User Manual Rev. 2
-3-
Introduction
Overview
Adjustment Handle
Double Bracketed Yoke
Side View
Front View
Control Panel
3- and 5-Pin DMX In/Out
Safety Cable Loop
Power In/Out
Fuse
Top View
-4-
Rear View
COLORdash™ Par-Tri 18VW User Manual Rev. 2
Introduction
Dimensions
11.73 in
298 mm
9.45 in
240 mm
12.72 in
323 mm
4.19 in
106.3 mm
COLORdash™ Par-Tri 18VW User Manual Rev. 2
-5-
Setup
3. Setup
AC Power
The COLORdash™ Par-Tri 18VW has an auto-ranging power supply that works with an
input voltage range of 100~240 VAC, 50/60 Hz. To determine the power requirements
for each COLORdash™ Par-Tri 18VW, refer to the label affixed to the product. You can
also refer to the Technical Specifications section in this manual.
The listed current rating indicates the maximum current draw during normal operation.
For more information, you may download Sizing Circuit Breakers from the CHAUVET®
website: www.chauvetpro.com.
Always connect this product to a protected circuit with an appropriate electrical ground to
avoid the risk of electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the
rheostat or dimmer channel serves only as a 0 to 100% switch.
AC Plug The COLORdash™ Par-Tri 18VW comes with a power input cord terminated with a
Neutrik® powerCON® connector on one end, and an Edison plug on the other end
(U.S. market). If the power input cord that came with your product has no plug or if you
need to change the Edison plug, use the table below to wire the new plug.
Connection
Power Linking
Wire (U.S.)
Wire (Europe)
Screw Color
AC Live
Black
Brown
Yellow or Brass
AC Neutral
White
Blue
Silver
AC Ground
Green/Yellow
Green/Yellow
Green
The Nexus™ 2x2 supports power linking. You can power link up to:
· 15 products at 120 VAC, or
· 28 products at 230 VAC
This product comes with a power input cord. This product does not come with a power
linking cable; however, a power linking cable is available as an option.
Make sure to disconnect the product’s power cord before replacing a blown fuse. Always
replace the blown fuse with another of the same type and rating.
Fuse Replacement 1. Disconnect the product from the power outlet.
2. With a flat head screwdriver, unscrew the fuse holder cap from its housing.
3. Remove the blown fuse and replace it with a good fuse of the same type and rating
(T 2 A @ 250 V).
4. Screw the fuse holder cap back in its place and reconnect power.
-6-
COLORdash™ Par-Tri 18VW User Manual Rev. 2
Setup
DMX Linking
You can link the COLORdash™ Par-Tri 18VW to a DMX controller using a standard
DMX serial connection. If using other DMX compatible products with the
COLORdash™ Par-Tri 18VW, you can control each individually with a single DMX
controller.
DMX Modes The COLORdash™ Par-Tri 18VW uses the standard DMX data connection for its 2 Ch,
3 Ch, and 7 Ch DMX modes.
· Refer to the Introduction section for a brief description of these modes.
· Refer to the Operation section to learn how to configure the COLORdash™ Par-Tri
18VW to work in these modes.
· The DMX Values section provides you with detailed information regarding the DMX
modes.
Master/Slave The Master/Slave mode allows a COLORdash™ Par-Tri 18VW (master product) to
Connectivity control one or more products (slave products) without a DMX controller.
One COLORdash™ Par-Tri 18VW becomes the master product either when running in
static mode or when using the automatic (Auto) programs.
In addition, you must configure each of the slave products (via control panel) to operate
in Slave mode. During Master/Slave operation, the slave products will operate in unison
with the master product.
For more information, see the Menu Map section.
Do not connect a DMX controller to products operating in Master/Slave mode. The DMX
controller signals may interfere with the signals from the master product.
· The Operation section of this manual provides detailed instructions on how to
configure the Master and Slave products.
· If you need more information about DMX standards, Master/Slave connectivity, or the
DMX cables needed in order to link the product to a DMX controller, download the
DMX Primer from the CHAUVET® website: www.chauvetpro.com..
COLORdash™ Par-Tri 18VW User Manual Rev. 2
-7-
Setup
Mounting
Before mounting this product, read and follow the Safety Notes.
Orientation Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging The COLORdash™ Par-Tri 18VW consists of a double-yoke bracket and the body of the
product. CHAUVET® recommends using the following general guidelines when
mounting this product.
· When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
· Make sure to mount this product away from any flammable material as indicated in
the Safety Notes.
· Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
· If hanging this product, make sure that the mounting location can support the
product’s weight. See the Technical Specifications for the weight-bearing
requirements of this product.
· When hanging this product, always secure to a fastening device using a safety cable
(included).
Procedure
The COLORdash™ Par-Tri 18VW comes with a double-yoke bracket to which you can
either attach mounting clamps for hanging or simply use as a floor stand. You must
supply your own mounting clamps. Make sure the clamps are capable of supporting the
weight of this product. Use at least one mounting point per product.
Mounting Diagram
Floor Mounting
-8-
Overhead Mounting
COLORdash™ Par-Tri 18VW User Manual Rev. 2
Operation
4. Operation
Control Panel
Description
Button
<MENU>
<ENTER>
<UP>
<DOWN>
Control Options
Programming
Function
Exits from the current menu or function
Enables the currently displayed menu or sets the currently
selected value in to the current function
Navigates upward through the menu options and increases the
numeric value when in a function
Navigates downward through the menu options and decreases
the numeric value when in a function
You can set the COLORdash™ Par-Tri 18VW starting address in the 001 to 512 DMX
range. This enables control of up to 73 products in the 7-channel 7 Ch personality.
Refer to the Menu Map section to fully understand the menu options. The menu map
shows the main level and a variable number of programming levels for each option.
· To go to the desired main level, press <MENU> repeatedly until the option shows on
the display. Press <ENTER> to select. This will take you to the first programming
level for that option.
· To select an option or value within the current programming level, press <UP> or
<DOWN> until the option shows on the display. Press <ENTER> to select. In this
case, if there is another programming level, you will see that first option, or you will
see the selected value.
· Press <MENU> repeatedly to exit to the previous main level.
DMX Personality This setting allows you to choose a particular DMX personality.
1. Go to the Channel main level.
2. Select the desired personality (2 Ch, 3 Ch, or 7 Ch).
For the highest starting address you can select for each personality, see the DMX
Values section. Verify that the starting addresses on the products do not overlap due to
the new personality setting.
DMX Control In this mode, each product will respond to a unique starting address from the DMX
controller. All products with the same starting address will respond in unison. Highest
DMX address is limited by the DMX Personality that is assigned.
1. Select a DMX personality as shown in DMX Personality.
2. Set the running mode:
a. Go to the M&S Mode main level.
b. Select Slave.
3. Set the starting address:
a. Go to Address main level.
b. Select the starting address (001~511).
The highest recommended starting address for each DMX mode are as follows:
DMX Mode
2 Ch
3 Ch
7 Ch
COLORdash™ Par-Tri 18VW User Manual Rev. 2
DMX Address
511
510
506
-9-
Operation
Static Color The Static Color mode allows for permanent white color mixing without a DMX controller.
1. Go to the Static main level.
2. Select Fix C or Manu C.
a. Fix C:
i. Select W for warm white LEDs at 100%
ii. Select C for cool white LEDs at 100%
iii. Select CW for all LEDs at 100%
b. Manu C:
i. Select W for warm white LEDs or C for cool white LEDs.
ii. Select the desired color value (Value 000~255).
iii. Repeat the steps for the other color.
Auto Programs Auto programs allow for dynamic CW color mixing without a DMX controller.
1. Go to Auto.
2. Select the desired auto (Auto 1~5) program.
3. Select the desired speed at which the chosen program will run (Speed 000~100).
You cannot edit any of the auto programs (Auto 1~5).
Product Information This menu option provides software information and product testing
1. Go to the Info main level.
2. Select the desired program level based on the information required.
a. Fixture Hours – Displays the amount of time the product has been in use.
b. Version – Displays the software version installed on the product.
c. Auto>Test- Turns on all LEDs in sequence for testing.
Master/Slave The Master/Slave mode allows a group of COLORdash™ Par-Tri 18VWs (slave
products) to simultaneously duplicate the output of another COLORdash™ Par-Tri 18VW
(master product) without a DMX controller.
1. Set each of the slave products:
a. Go to M&S Mode.
b. Select Slave.
2. Set the master product:
a. Go to M&S Mode.
b. Select Master.
c. Select an Auto or Static program as explained in Auto Programs.
· The master product is the one that runs a program whether in Auto or Static Color
mode.
· Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master product.
· The master product should be the first product in the daisy chain.
White Balance The White Balance setting determines how the product generates the white color by
setting limits on the cool and warm white LED settings.
1. Go to the White Balance main level.
2. Select W to set limits for the warm white LEDs or C for the cool white LEDs.
3. Select the desired color value (Value 000~255)
4. Repeat the steps for the other color.
-10-
COLORdash™ Par-Tri 18VW User Manual Rev. 2
Operation
Display Backlight This setting determines how long the backlight on the display will stay on.
1. Go to the BackLite main level.
2. Select the desired amount of time the backlight display will stay on after pressing the
last menu button (On, 10 S, 20 S, or 30 S).
Dimmer Curves This setting provides you with four options to simulate the dimming curve of an
incandescent light product.
1. Go to the Dim Mode main level.
2. Select the desired dimmer curve (OFF, DIM1, DIM2, or DIM3).
OFF
DIM1~3:
COLORdash™ Par-Tri 18VW User Manual Rev. 2
The output is proportional (linear) to the dimmer and CW channel values.
The output follows the dimmer and CW channel values based on the
corresponding dimmer curve, being DIM1 the fastest and DIM3 the
slowest.
-11-
Operation
Menu Map
Main Level
Auto
Programming Levels
Auto 1~5
Description
Speed
Fix C
Static
000~100 5 automatic programs
W
Warm white
C
Cool white
CW
Manu C
W
Value
C
Cool/warm white
000~255
Off
Dim Mode
No dimmer
DIM 1~3
BackLite
Dimmer curve
10S
Turns off display backlight after 10 sec of
inactivity
20S
Turns off display backlight after 20 sec of
inactivity
30S
Turns off display backlight after 30 sec of
inactivity
On
Auto
Info
Channel
M&S Mode
White Balance
-12-
Display backlight always on
Test
FixHours
Address
W
C
Combines cool white and warm white to make a
custom white color
Turns on all LEDs in sequence for testing
Shows total operating hours
Version
Shows installed software version
001~511
Selects DMX address (highest channel restricted
to personality chosen)
2 Ch
2-channel: C/W control
3 Ch
3-channel: C/W, dimmer
7 Ch
7-channel: C/W, dimmer, strobe, auto programs,
dimmer speed, auto speed
Master
DMX mode
Slave
Slave mode
Value
125~255
Sets white LED maximum value
Sets cool LED maximum value
COLORdash™ Par-Tri 18VW User Manual Rev. 2
Operation
DMX Values
7 Ch
Channel
2 Ch
Value
Percent/Setting
1
Dimmer
000 ó 255
0~100%
2
Warm White
000 ó 255
0~100%
3
Cool White
000 ó 255
0~100%
4
Strobe
000 ó 010
011 ó 255
No function
Slow to fast
5
Auto Programs
000 ó 051
052 ó 101
102 ó 152
153 ó 203
204 ó 254
255
No function
Auto 1
Auto 2
Auto 3
Auto 4
Auto 5
6
Auto Speed
000 ó 255
Slow to fast
Dimmer Speed
000 ó 051
052 ó 101
102 ó 152
153 ó 203
204 ó 255
Preset dimmer speed from display menu
Linear dimmer
Nonlinear dimming curve 1 (fastest)
Nonlinear dimming curve 2
Nonlinear dimming curve 3 (slowest)
7
3 Ch
Function
Channel
Function
Value
Percent/Setting
1
Dimmer
000 ó 255
0~100%
2
Warm White
000 ó 255
0~100%
3
Cool White
000 ó 255
0~100%
Channel
Function
Value
Percent/Setting
1
Warm White
000 ó 255
0~100%
2
Cool White
000 ó 255
0~100%
COLORdash™ Par-Tri 18VW User Manual Rev. 2
-13-
Technical Information
5. Technical Information
Product
Maintenance
To maintain optimum performance and minimize wear, you should clean this product
frequently. Usage and environment are contributing factors in determining the cleaning
frequency.
As a rule, clean this product at least twice a month. Dust build-up reduces light output
performance and can cause overheating. This can lead to reduced light source life and
increased mechanical wear.
To clean your product:
· Unplug the product from power.
· Wait until the product is at room temperature.
· Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external vents and accessible internal components.
· Clean all external surfaces with a mild solution of non-ammonia glass cleaner or
isopropyl alcohol.
· Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
· Wipe any dirt or grime to the outside edges of the lens surface.
· Gently polish the lens surfaces until they are free of haze and lint.
Always dry the external surfaces thoroughly and carefully after cleaning them.
Returns
You must send the product prepaid, in the original box, and with the original packing and
accessories. CHAUVET® will not issue call tags.
Call CHAUVET® and request a Return Merchandise Authorization (RMA) number
before shipping the product. Be prepared to provide the model number, serial number,
and a brief description of the cause(s) for the return.
Clearly label the package with an RMA number. CHAUVET® will refuse any product
returned without an RMA number.
Do not write the RMA number directly on the box. Instead, write it on a properly affixed
label.
Once you have received the RMA number, include the following information on a piece
of paper inside the box:
· Your name
· Your address
· Your phone number
· The RMA number
· A brief description of the problem(s)
Be sure to pack the product properly. Any shipping damage resulting from inadequate
packaging will be the customer’s responsibility. FedEx packing or double-boxing are
recommended.
CHAUVET® reserves the right to use its own discretion to repair or replace returned
product(s).
-14-
COLORdash™ Par-Tri 18VW User Manual Rev. 2
Technical Information
Technical Specifications
Dimensions and
Weight
Length
Width
Height
Weight
12.7 in (323 mm)
11.7 in (298 mm)
4.1 in (106 mm)
10.2 lb (4.6 kg)
Note: Dimensions in inches rounded to the nearest decimal digit.
Power
Power Supply Type
Range
Voltage Selection
Switching (internal)
100 to 240 V, 50/60 Hz
Auto-ranging
Parameter
120 V, 60 Hz
230 V, 50 Hz
Consumption
Operating current
Power linking
Fuse
89 W
0.75 A
15 products
2 A, 250 V
92 W
0.40 A
28 products
2 A, 250 V
Power I/O
U.S./Worldwide
Europe
Power input connector
Power output connector
Power cord plug
Neutrik® powerCON® A
Neutrik® powerCON® B
Edison (U.S.)
Neutrik® powerCON® A
Neutrik® powerCON® B
Local plug
Type
Power
Lifespan
LED
5W
50,000 hours
Color
Quantity
Current
Tri-color (2 WW and 1 CW)
18
500 mA
Parameter
Standard Optics
Illuminance @ 5 m
Beam angle
Field angle
754 lx
20°
39°
Max. External Temperature
Cooling System
104 °F (40 °C)
Convection
I/O Connectors
Connector Type
Channel Range
3- and 5-pin XLR
Sockets
2, 3 or 7
Product Name
Item Code
UPC Number
COLORdash™ Par-Tri
18VW
03030714
781462210625
Light Source
Photo Optic
Thermal
DMX
Ordering
COLORdash™ Par-Tri 18VW User Manual Rev. 2
-15-
Contact Us
WORLD HEADQUARTERS - CHAUVET®
General Information
Address: 5200 NW 108th Avenue
Sunrise, FL 33351
Voice:
(954) 577-4455
Fax:
(954) 929-5560
Toll free: (800) 762-1084
Technical Support
Voice:
(954) 577-4455 (Press 4)
Fax:
(954) 756-8015
Email:
tech@chauvetlighting.com
World Wide Web www.chauvetlighting.com
UNITED KINGDOM AND IRELAND - CHAUVET® Europe Ltd.
General Information
Address: Unit 1C
Brookhill Road Industrial Estate
Pinxton, Nottingham, UK
NG16 6NT
Voice:
+44 (0)1773 511115
Fax:
+44 (0)1773 511110
Technical Support
Email:
uktech@chauvetlighting.com
World Wide Web www.chauvetlighting.co.uk
MEXICO - CHAUVET® Mexico
General Information
Address: Av. Santa Ana 30
Parque Industrial Lerma
Lerma, Mexico C.P. 52000
Voice:
+52 (728) 285-5000
Technical Support
Email:
servicio@chauvet.com.mx
World Wide Web www.chauvet.com.mx
Outside the U.S., United Kingdom, Ireland, or Mexico, contact your dealer. Follow their instructions to request
support or to return a product. Visit our website for contact details.
Download PDF