Radio Shack | SM-1000 | Specifications | Radio Shack SM-1000 Specifications

TECHNICAL
Practice
TELECOM SOLUTIONS
FOR THE
PA-2A
Paging Amplifier
Loud Ringer
Practice
2 1 S T C E N T U RY
May 3, 2004
Add Paging and Multiple Line
Loud Ringing to Any Phone System
The PA-2A provides loud ringing and paging to electronic key systems, 1A2 Key systems, PABX’s as
well as No-KSU phones and multiline phones.
Paging is accomplished by connecting the PA-2A to
a paging port or unused telephone line input (trunk
port) of nearly any phone system.
The PA-2A will also generate adjustable loud ringing
from up to 6 analog lines or from a dry contact closure. Either a loud electronic warble, or one of three
other soft chime sounds may be selected. An external “night transfer” switch can be
added to turn loud ringing on or off in night bell applications.
The PA-2A is easy to install and eliminates the installation of multiple bells, relays and
paging cards. The unit comes
complete with a power supply,
amplifier and (1) paging horn.
Applications
• Amplified loud paging
Features
• Two watts of paging power
• All lines are optically coupled for compatibility
with fax switches and analog PABX/KSU
stations
• Can provide background music from an external
source (trunk mode only)
• Paging from an unused trunk port or paging port
• Night bell
• Loud ringing
Phone...715.386.8861
info@vikingelectronics.com
h t t p : / / w w w. v i k i n g e l e c t r o n i c s . c o m
• Choose one of four ringing sounds:
-
Electronic warble (traditional loud ringer)
Double gong (two identical “gong” tones)
Quadruple chime (four descending chime tones)
Door chime (ding-dong)
• Provides loud ringing or night bell, from 1-6 lines
for warehouses, yards, etc.
• Output for controlling a 12 volt relay from 1-6
ringing lines
• Page alert tone (trunk mode only)
• 600 ohm output for sourcing high powered
amplifiers
Specifications
Power: 120V AC/13.8V AC 1.25A, UL listed adapter provided
Dimensions: 133mm x 89mm x 44mm (5.25” x 3.5” x 1.75”)
Shipping Weight: 1.36 kg (3 lbs)
Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95% noncondensing humidity
Paging Output: 2 watts - powers up to (3) 8 ohm or (16) 45 ohm
speakers
Sound Pressure: 110 dB @ 1 meter (loud electronic warble)
Speakers: (1) 25AE 8 ohm paging horn included, (3) maximum
Maximum Speaker Run: 91m (300 ft) maximum 18 AWG
Talk Battery: 24V DC
Connections: (2) RJ25 jacks, (1) 10 position screw terminal
block
IF YOU HAVE A PROBLEM WITH A VIKING PRODUCT, PLEASE CONTACT: VIKING TECHNICAL SUPPORT AT (715) 386-8666
Our Technical Support Department is available for assistance Monday 8am - 4pm and Tuesday through Thursday 8am - 5pm central time. So that we can give you better service, before you call please:
1. Know the model number, the serial number and what software version you have (see serial label).
2. Have your Technical Practice in front of you.
3. It is best if you are on site.
RETURNING PRODUCT FOR REPAIR
RETURNING PRODUCT FOR EXCHANGE
The following procedure is for equipment that needs repair:
1. Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (RA)
number. The customer MUST have a complete description of the problem, with all pertinent information regarding the
defect, such as options set, conditions, symptoms, methods to duplicate problem, frequency of failure, etc.
2. Packing: Return equipment in original box or in proper packing so that damage will not occur while in transit. Static
sensitive equipment such as a circuit board should be in an anti-static bag, sandwiched between foam and individually boxed. All equipment should be wrapped to avoid packing material lodging in or sticking to the equipment. Include
ALL parts of the equipment. C.O.D. or freight collect shipments cannot be accepted. Ship cartons prepaid to:
Viking Electronics, 1531 Industrial Street, Hudson, WI 54016
3. Return shipping address: Be sure to include your return shipping address inside the box. We cannot ship to a PO Box.
4. RA number on carton: In large printing, write the R.A. number on the outside of each carton being returned.
The following procedure is for equipment that has failed out-of-box (within 10 days of purchase):
1. Customer must contact Viking’s Technical Support at 715-386-8666 to determine possible causes for the problem. The
customer MUST be able to step through recommended tests for diagnosis.
2. If the Technical Support Product Specialist determines that the equipment is defective based on the customer's input
and troubleshooting, a Return Authorization (R.A.) number will be issued. This number is valid for fourteen (14)
calendar days from the date of issue.
3. After obtaining the R.A. number, return the approved equipment to your distributor, referencing the R.A. number. Your
distributor will then replace the product over the counter at no charge. The distributor will then return the product to
Viking using the same R.A. number.
4. The distributor will NOT exchange this product without first obtaining the R.A. number from you. If you haven't
followed the steps listed in 1, 2 and 3, be aware that you will have to pay a restocking charge.
WARRANTY
Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of one year from the date of purchase from any authorized Viking distributor or 18 months from the date manufactured, which ever is greater. If at any time during the warranty period, the product is deemed defective or malfunctions, return the product to Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016. Customer must contact Viking's
Technical Support Department at 715-386-8666 to obtain a Return Authorization (R.A.) number.
This warranty does not cover any damage to the product due to lightning, over voltage, under voltage, accident, misuse, abuse, negligence or any damage caused by use of the product by the purchaser or others.
Vikings sole responsibility shall be to repair or replace (at Viking's option) the material within the terms stated above. VIKING SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND INCLUDING INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING DIRECTLY OR INDIRECTLY FROM ANY BREACH OF ANY WARRANTY EXPRESSED OR IMPLIED, OR FOR ANY OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WHICH ARE HEREBY EXCLUDED
BEYOND THE ONE YEAR DURATION OF THIS WARRANTY. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.
FCC REQUIREMENTS
This equipment complies with Part 68 of the FCC rules. Located on the equipment is a label that contains,
among other information, the FCC registration number and ringer equivalence number (REN). If requested, this
information must be provided to the telephone company.
The REN is used to determine the quantity of devices which may be connected to the telephone line.
Excessive REN's on the telephone line may result in the devices not ringing in response to an incoming call. In
most, but not all areas, the sum of the REN's should not exceed five (5.0) To be certain of the number of devices
that may be connected to the line, as determined by the total REN's, contact the telephone company to determine the maximum REN for the calling area.
This equipment cannot be used on the telephone company-provided coin service. Connection to Party Line
Service is subject to State Tariffs.
If this equipment causes harm to the telephone network, the telephone company will notify you in advance
that temporary discontinuance of service may be required. If advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with
the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations, or procedures that could
affect the operation of the equipment. If this happens, the telephone company will provide advance notice in
order for you to make the necessary modifications in order to maintain uninterrupted service.
If trouble is experienced with this equipment, please contact: Viking Electronics, Inc., 1531 Industrial
Street, Hudson, WI 54016 (715) 386-8666
If the trouble is causing harm to the telephone network, the telephone company may request you to remove
the equipment from the network until the problem is resolved.
The PA-2A uses the USOC jacks RJ11C, RJ14C, and RJ25C.
It is recommended that the customer install an AC surge arrester in the AC outlet to which this device is connected. This is to avoid damaging the equipment caused by local lightning strikes and other electrical surges.
This equipment is Hearing-Aid Compatible (HAC).
The telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other
electronic device, including fax machines, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is
sent and an identification of the business or other entity, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.)
PART 15 LIMITATIONS
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his own expense.
Installation and Programming
Paging Volume
Ringing Volume
VIKING ©
MAX
POWER 13.8V AC
MIN
MAX
MIN
MAX
PAGING
HORN
Power LED
600 OHM
AUDIO OUT
AUDIO LOADING
TALK BATTERY
ALERT TONE
WARBLE / CHIME
1 2 3 4
5 6
7 8
9 10
PWR
RINGING LINES
1-3
C.O. Line or Analog
PABX/KSU Station
4-6
12345
1
2
3
4
5
6
7
8
9
10
Lines 1, 2 and 3
Lines 4, 5 and 6
MAX
PAGING - LOUD RINGING
AMPLIFIER SYSTEM
TRUNK OR
PAGING PORT
13.8V AC
Adapter
(included)
MIN
RINGING
VOLUME
VIKING
ELECTRONICS
HUDSON, WI 54016
DRY CONTACT
CLOSURE IN
120V AC
MODEL PA-2A
NIGHT
TRANSFER
MIN
PAGING
VOLUME
Paging Port or
Unused Telephone Line
Input (Trunk Port)
25AE Paging Horn
(included)
A. Amplified Loud Paging
VIKING ©
MIN
MAX
MAX
600 OHM
AUDIO OUT
PAGING - LOUD RINGING
AMPLIFIER SYSTEM
PAGING
HORN
Important: Page Alert Tone or background
music can NOT be added when interfacing
the PA-2A to a Paging Port.
RINGING
VOLUME
TRUNK OR
PAGING PORT
Step 2. Connect pins 5 and 6 to the paging
port output.
MIN
MODEL PA-2A
VIKING
ELECTRONICS
HUDSON, WI 54016
1 2 3 4
5 6
7 8
9 10
NIGHT
TRANSFER
Step 1. Move the TALK BATTERY switch to
the OFF position (DIP switch 4).
POWER 13.8V AC
PAGING
VOLUME
DRY CONTACT
CLOSURE IN
1. Paging Port
AUDIO LOADING
TALK BATTERY
ALERT TONE
WARBLE / CHIME
25AE Paging Horn
(included)
PWR
RINGING LINES
1-3
4-6
12345
1
Note: For information on speakers to use, ambient
noise levels and speaker wiring, see Fax Back
Document 498.
2
3
4
5
6
7
8
9
10
To Paging Port
2. Trunk/Line Port
Step 1. Move the TALK BATTERY switch to the ON position (DIP switch 4).
Step 2. Move the AUDIO LOADING switch to the OFF position (DIP switch 5).
Step 3. Connect pins 5 and 6 to an unused telephone line input (trunk port).
Step 4. Background music may be added as shown, the music level will be greatly reduced during a page.
VIKING ©
POWER 13.8V AC
PAGING
VOLUME
MIN
MODEL PA-2A
Note: For information on speakers to use, ambient noise levels
and speaker wiring, see Fax Back Document 498.
RINGING
VOLUME
VIKING
ELECTRONICS
HUDSON, WI 54016
MIN
MAX
(2) 10K
Resistors
(included)
MAX
TRUNK OR
PAGING PORT
600 OHM
AUDIO OUT
PAGING
HORN
1 2 3 4
5 6
7 8
9 10
NIGHT
TRANSFER
DRY CONTACT
CLOSURE IN
PAGING - LOUD RINGING
AMPLIFIER SYSTEM
AUDIO LOADING
TALK BATTERY
ALERT TONE
WARBLE / CHIME
PWR
RINGING LINES
1-3
4-6
Background
Music Source
12345
1
2
3
4
5
6
7
8
9
25AE
Paging
Horn
(included)
10
Unused Telephone
Line Input
(Trunk Port)
B. Loud Ringing/Night Bell
1. Ringing Analog Lines
Step 1. Connect lines 1 (R/G), 2 (Y/BK) and 3 (BL/W) to RINGING LINES 1-3.
Step 2. Connect lines 4 (R/G), 5 (Y/BK) and 6 (BL/W) to RINGING LINES 4-6.
Ringing Line Input Wiring
Yellow
Black
Line 4
Black
White
TRUNK OR
PAGING PORT
1 2 3 4
5 6
7 8
9 10
7
9
25AE Paging Horn
(included)
PWR
RINGING LINES
1-3
4-6
12345
1
2
3
4
5
6
8
10
Line 5
Blue
Line 3
MAX
PAGING - LOUD RINGING
AMPLIFIER SYSTEM
AUDIO LOADING
TALK BATTERY
ALERT TONE
WARBLE / CHIME
Yellow
Line 2
Blue
White
Red
MIN
MAX
PAGING
HORN
Line 1
RINGING
VOLUME
VIKING
ELECTRONICS
HUDSON, WI 54016
600 OHM
AUDIO OUT
Green
MIN
MODEL PA-2A
DRY CONTACT
CLOSURE IN
RJ25
Green
Red
PAGING
VOLUME
NIGHT
TRANSFER
RJ25
VIKING ©
Lines 4-6
POWER 13.8V AC
Lines 1-3
Line 6
Lines 4, 5 and 6
Lines 1, 2 and 3
Note: For information on speakers to
use, ambient noise levels and speaker
wiring, see Fax Back Document 498.
2. Dry Contact (Common Audible) Closure (contacts not included)
VIKING ©
PAGING
VOLUME
POWER 13.8V AC
MIN
MAX
MAX
600 OHM
AUDIO OUT
PAGING
HORN
PAGING - LOUD RINGING
AMPLIFIER SYSTEM
1 2 3 4
5 6
7 8
9 10
NIGHT
TRANSFER
Note: For information on speakers to use, ambient
noise levels and speaker wiring, see Fax Back
Document 498.
MIN
RINGING
VOLUME
TRUNK OR
PAGING PORT
Step 2. A dry contact closure will initiate loud
ringing.
MODEL PA-2A
VIKING
ELECTRONICS
HUDSON, WI 54016
DRY CONTACT
CLOSURE IN
Step 1. Connect the dry contact closure to pins
3 and 4.
AUDIO LOADING
TALK BATTERY
ALERT TONE
WARBLE / CHIME
PWR
25AE Paging Horn
(included)
RINGING LINES
1-3
12345
4-6
1
2
3
4
5
6
7
8
9
10
Dry Contact Closure
(not included)
3. Night Transfer (Loud Ringing) Switch (switch not included)
A Night Transfer Switch may be used to enable or disable loud ringing.
a. Ringing Analog Lines
Connect the night transfer switch to terminal pins 1 and 2. When the switch is on (closed), loud ringing is disabled. When the switch is off (open), loud ringing is enabled.
Ringing Line Input Wiring
Black
White
MIN
MAX
MAX
600 OHM
AUDIO OUT
PAGING
HORN
PAGING - LOUD RINGING
AMPLIFIER SYSTEM
1 2 3 4
5 6
7 8
9 10
PWR
RINGING LINES
1-3
12345
4-6
1
2
3
4
5
6
7
8
9
25AE Paging Horn
(included)
10
Line 5
Blue
Line 3
RINGING
VOLUME
VIKING
ELECTRONICS
HUDSON, WI 54016
AUDIO LOADING
TALK BATTERY
ALERT TONE
WARBLE / CHIME
Line 4
Yellow
Line 2
Blue
White
Red
MIN
MODEL PA-2A
TRUNK OR
PAGING PORT
Green
Line 1
Yellow
Black
POWER 13.8V AC
RJ25
Green
Red
PAGING
VOLUME
DRY CONTACT
CLOSURE IN
RJ25
VIKING ©
Lines 4-6
NIGHT
TRANSFER
Lines 1-3
Line 6
Lines 4, 5 and 6
Lines 1, 2 and 3
Night Transfer (Loud Ringing)
Switch (not included)
Note: For information on speakers to use, ambient noise levels and speaker wiring, see Fax Back Document 498.
b. Dry Contact Closure with Night Transfer (Loud Ringing) Switch
Interface the night transfer switch in
series with the contact closure. When
the switch is on (closed), loud ringing is
enabled. When the switch is off (open),
loud ringing is disabled.
VIKING ©
POWER 13.8V AC
PAGING
VOLUME
RINGING
VOLUME
VIKING
ELECTRONICS
HUDSON, WI 54016
MIN
MAX
MAX
600 OHM
AUDIO OUT
PAGING
HORN
1 2 3 4
5 6
7 8
9 10
NIGHT
TRANSFER
TRUNK OR
PAGING PORT
PAGING - LOUD RINGING
AMPLIFIER SYSTEM
DRY CONTACT
CLOSURE IN
Note: For information on speakers to use,
ambient noise levels and speaker wiring,
see Fax Back Document 498.
MIN
MODEL PA-2A
AUDIO LOADING
TALK BATTERY
ALERT TONE
WARBLE / CHIME
PWR
RINGING LINES
1-3
4-6
12345
1
2
3
4
5
6
7
8
9
Dry Contact Closure
(not included)
Night Transfer (Loud Ringing) Switch
(not included)
10
25AE Paging Horn
(included)
C. Contact Closure from Up to 6 Ringing Lines
When a 12V DC relay coil (Radio Shack part: # 275-248, not included) is connected as shown in the diagram below,
the relay is activated for the duration of each ring on 1-6 C.O. lines or analog PABX/KSU stations.
VIKING ©
RINGING
VOLUME
N.O.
MAX
TRUNK OR
PAGING PORT
PAGING
HORN
5 6
7 8
9 10
COM
Relay (Radio Shack
Part # 275-248)
PWR
RINGING LINES
1-3
4-6
12345
1
2
3
4
5
6
7
8
9
10
D. Long Runs Between Amplifer and Speakers
VIKING ©
Very long runs between the PA-2A and the speakers might require
70V transformers (Radio Shack part #32-1031 or equivalent).
POWER 13.8V AC
PAGING
VOLUME
Note: For additional information on how to minimize loss of audio in
long speaker runs, see Fax Back Document 856.
MIN
RINGING
VOLUME
VIKING
ELECTRONICS
HUDSON, WI 54016
MIN
MAX
MAX
PAGING - LOUD RINGING
AMPLIFIER SYSTEM
AUDIO LOADING
TALK BATTERY
ALERT TONE
WARBLE / CHIME
25AE Paging Horn
(included)
MODEL PA-2A
1 2 3 4
5 6
7 8
9 10
NIGHT
TRANSFER
AUDIO LOADING
TALK BATTERY
ALERT TONE
WARBLE / CHIME
N.C.
600 OHM
AUDIO OUT
1 2 3 4
NIGHT
TRANSFER
DRY CONTACT
CLOSURE IN
PAGING - LOUD RINGING
AMPLIFIER SYSTEM
PAGING
HORN
MIN
MAX
RELAY
CONTROL
600 OHM
AUDIO OUT
VIKING
ELECTRONICS
HUDSON, WI 54016
TRUNK OR
PAGING PORT
MIN
MODEL PA-2A
DRY CONTACT
CLOSURE IN
POWER 13.8V AC
PAGING
VOLUME
PWR
RINGING LINES
1-3
8 Ohm
Com
2.5 Watt
Com
12345
4-6
2.5 Watt
(Very Long Run)
Com
1
2
3
4
5
6
7
8
9
10
8 Ohm
Com
Radio Shack part #32-1031
E. Connecting Multiple PA-2A’s
When more than 6 ringing lines are to be monitored or additional amplifiers need to be added, install as shown below,
using the 600 OHM AUDIO OUTPUT connections.
RINGING
VOLUME
TRUNK OR
PAGING PORT
600 OHM
AUDIO OUT
PAGING
HORN
5 6
7 8
9 10
PWR
RINGING LINES
1-3
4-6
MIN
MAX
MAX
PAGING - LOUD RINGING
AMPLIFIER SYSTEM
600 OHM
AUDIO OUT
DRY CONTACT
CLOSURE IN
1 2 3 4
NIGHT
TRANSFER
AUDIO LOADING
TALK BATTERY
ALERT TONE
WARBLE / CHIME
MIN
RINGING
VOLUME
PAGING
HORN
MAX
PAGING - LOUD RINGING
AMPLIFIER SYSTEM
MODEL PA-2A
VIKING
ELECTRONICS
HUDSON, WI 54016
TRUNK OR
PAGING PORT
MIN
MAX
PAGING
VOLUME
DRY CONTACT
CLOSURE IN
MIN
VIKING ©
MODEL PA-2A
VIKING
ELECTRONICS
HUDSON, WI 54016
POWER 13.8V AC
POWER 13.8V AC
PAGING
VOLUME
1 2 3 4
5 6
7 8
9 10
NIGHT
TRANSFER
VIKING ©
AUDIO LOADING
TALK BATTERY
ALERT TONE
WARBLE / CHIME
PWR
RINGING LINES
12345
1
2
3
4
5
6
7
8
9
10
1-3
4-6
12345
Note: DIP switch 4 must
be in the OFF position.
1
2
3
4
5
6
7
8
9
10
25AE Paging Horn
(included)
F. Adding Additional Paging Power
An external amplifier can be added to increase the paging and loud ringing power. Simply connect the 600 OHM AUDIO
OUTPUT screw terminals to the line level input of any high powered paging amplifier, such as the Viking M15W, or any
existing paging system.
M15W Paging Amplifier (not included)
VIKING ©
MIN
VIKING
MODEL PA-2A
RINGING
VOLUME
VIKING
ELECTRONICS
HUDSON, WI 54016
MAX
TRUNK OR
PAGING PORT
600 OHM
AUDIO OUT
PAGING
HORN
1 2 3 4
5 6
7 8
9 10
NIGHT
TRANSFER
DRY CONTACT
CLOSURE IN
PAGING - LOUD RINGING
AMPLIFIER SYSTEM
LOW
HIGH
4-6
MAX
MIN
PAGING
POWER AMPLIFIER
600
OHM
1
2
3
Existing Paging Amplifier
(not included)
INPUTS
OUTPUT
15 WATT
AMPLIFIER
4
5
6
8
OHM
7
8
PWR
RINGING LINES
1-3
Need More Information on the M15W?
Call (715) 386-4345 and select 481.
PAGING
VOLUME
VIKING
ELECTRONICS
HUDSON, WI 54016
MIN
MAX
AUDIO LOADING
TALK BATTERY
ALERT TONE
WARBLE / CHIME
?
MODEL M15W
©
TONE
CONTROL
POWER 13.8V AC
POWER 13.8V AC
PAGING
VOLUME
12345
POWER
LED
1
2
3
4
5
6
7
8
9
10
or
G. Add Paging to Homes and Small Business with Single Line Phones
Step 2. Set the C-1000B Talk Battery
switch OFF.
PAGING
VOLUME
7
POWER 13.8V AC
ON
C
LED1
OUT TO
PHONES
KEYLESS
C.C. INPUT
TALK
OFF
DOOR
BOX 1
Step 3. Connect the PA-2A Trunk Port
(pins 5 & 6) to the C-1000B
Door Box 1 terminals.
DOORBOX
13VAC PWR
BATTERY
ON
DOOR
BOX 2
1
C
LED2
N.O. COM N.C.
DOOR STRIKE 1
3
1-3
C
LED3
7 8
9 10
7
9
PWR
4-6
12345
1
2
3
4
5
6
8
10
N.O. COM N.C.
DOOR STRIKE 2
C.O. Line or Analog
PABX/KSU station
Step 5. To page, come off hook on the
phone and dial #1.
5 6
RINGING LINES
2
25AE Paging Horn
(included)
Standard
Analog Phones
Step 4. Move the PA-2A Talk Battery
switch ON (DIP switch 4).
1 2 3 4
NIGHT
TRANSFER
AUDIO LOADING
TALK BATTERY
ALERT TONE
WARBLE / CHIME
9 10 11 12 13 14 15 16 17 18 19
SIG GND SIG GND SIG GND
VIDEO 1 IN VIDEO 2 IN VIDEO OUT
EARTH C.O. LINE
GND
INPUT
DOOR
STRIKE 2
DOOR
STRIKE 1
DOORBOX 2
DOORBOX
PWR OUTPUT
DOORBOX 1
8
N.O. N.C. - - - - AUX.
CONTACT
OUTPUT
MAX
PAGING - LOUD RINGING
AMPLIFIER SYSTEM
PAGING
HORN
6
MIN
MAX
TRUNK OR
PAGING PORT
5
COM
RINGING
VOLUME
600 OHM
AUDIO OUT
3 4
MIN
MODEL PA-2A
VIKING
ELECTRONICS
HUDSON, WI 54016
DRY CONTACT
CLOSURE IN
2
KEYLESS CONTACT
CLOSURE INPUT
DOOR ENTRY / CCTV VIDEO
/ PAGING CONTROLLER
PWR 13.8 VAC
1
Step 1. Program the C-1000B to be
in the Paging Mode ✱4.
VIKING ©
MODEL C-1000B
VIKING
ELECTRONICS
HUDSON, WI 54016
LINE OUT
TO PHONES
Need More Information on the C-1000B?
Call (715) 386-4345 and select 168.
VIKING ©
EARTH
GND
?
C-1000B Door Entry/Paging Controller (not included)
PHONE LINE
INPUT
The C-1000B can be added to allow
PA-2A paging from the existing single
line phones. If need be, a doorbox or
a second paging amplifier may also
be added to the C-1000B Doorbox 2
Terminals .
Note: For information on speakers to
use, ambient noise levels and speaker
wiring, see Fax Back Document 498.
H. DIP Switch Programming
Switch 1
Switch 2
OFF
OFF
Electronic Warble
OFF
ON
Double Gong
ON
OFF
Quadruple Chime
ON
ON
Door Chime
Sound Output Description
Alert tone ON (factory default)
4
OFF
Talk battery OFF (factory default)
4
ON
Talk battery ON
5
OFF
Audio load 10K (for applications
using background music)
5
ON
Audio load 600 ohms (factory
default)
OFF
1 2 3 4 5
AUDIO LOADING
TALK BATTERY
ALERT TONE
WARBLE ON
/ CHIME
1 2 3 4
5 6
7 8
PAGING
HORN
ON
MAX
PAGING - LOUD RINGING
AMPLIFIER SYSTEM
TRUNK OR
PAGING PORT
3
ON
MIN
MAX
600 OHM
AUDIO OUT
Alert tone OFF
Description
RINGING
VOLUME
VIKING
ELECTRONICS
HUDSON, WI 54016
DRY CONTACT
CLOSURE IN
OFF
MIN
MODEL PA-2A
NIGHT
TRANSFER
Position
3
PAGING
VOLUME
POWER 13.8V AC
Switch
VIKING ©
9 10
7
9
PWR
RINGING LINES
1-3
DIP Switches are
shown in the factory
default positions.
1 243 54 5
4 - 61 2 3
1
2
3
4
5
6
8
10
Sound Output Specifications
All tones require a minimum of 180ms of ringing voltage (or contact closure) to trigger. Once triggered, the electronic warble will run continuously until ringing stops (or contacts open). All other tones (double gong, quadruple chime, doorbell) will
run through their full sequence once and will not cycle again until the ringing stops (or contact opens) for at least 50ms and
a second ring signal (or contact closure) triggers them again.
A. Electronic Warble (Traditional Loud Ringer)
Duration of Contact Closure
On
Frequency alternates between 1440 Hz and 1140 Hz 20 times per second.
Off
B. Double Gong (Two “Gong” Tones)
On
Off
0.74
sec
2.2 sec
575 Hz
575 Hz
C. Quadruple Chime (Four Descending Chime Tones)
On
0.36
sec
0.36
sec
0.36
sec
888 Hz
699 Hz
584 Hz
2.2 sec
492 Hz
Off
D. Door Chime (Ding-Dong)
0.36
sec
2.7
sec
On
Off
794 Hz
526 Hz
Operation
When interfacing the PA-2A to a paging port, the TALK BATTERY switch (DIP switch 4) must be OFF. The PA-2A will
amplify all signals sent from the paging port.
When interfacing with an unused telephone line input (trunk port), the TALK BATTERY switch (DIP switch 4) must be ON
and the PA-2A must be connected to an unused trunk port. Simply access that trunk port and talk into the handset to page.
A page alert tone may be enabled or disabled with DIP switch 3. When the page alert tone is enabled, paging will interrupt
and hold off loud ringing for the duration of the page.
In both instances, the PA-2A can monitor 1 - 6 C.O. lines, 1 - 6 analog PABX/KSU stations or a dry contact closure for loud
ringing. The PA-2A will produce the selected ringing tone when ring voltage is detected on these line inputs or a contact is
closed on pins 3 and 4. Select the electronic warble tone (traditional loud ringing) for noisy areas. The softer chime tones
work well in less noisy environments.
Related Products
The 25AE and 30AE paging speakers provide additional economical paging coverage to existing Viking paging units (PA-2A, CPA7B, HF-3W, M2W) or to any system with an 8 ohm output.
In outdoor, factory or warehouse environments, 25AE paging horns
are the best method of producing understandable sound. In these
environments the directional design allows the installer to focus the
sound cone down aisles and toward work areas.
?
Need More Information on the 25AE or 30AE?
Call (715) 386-4345 and select 498.
In office and restaurant environments, it is best to distribute sound
more evenly. Ceiling mounted 30AE speakers in close proximity
offer the best distribution and are cost effective.
The 25AE Paging Horn features: adjustable base for easy mounting and directional adjustment, compact design for out of
the way mounting, and is designed to work with all of Viking’s paging products.
The 30AE Ceiling Speaker features: attractive white grill for flush mounting in office ceiling, mounting hardware included,
large permanent magnet, excellent frequency response, and is designed to work with all of Viking’s paging products.
The CPA-7B is a cost effective, multi- purpose, telecom paging system. The unit
features a low noise, high fidelity amplifier, providing 6 watts of power for a variety
of telecom paging applications. It can also provide background music and night
bell/common audible. In addition, multiple units may be daisy-chained for larger
paging applications.
The CPA-7B allows paging from any one of the following: an unused trunk input, a
page port, a C.O. line, Centrex line or analog PABX/KSU station port. For loud ringing, the CPA-7B generates an adjustable loud warble from a dry contact closure, a
ringing C.O. line or a ringing analog
Need More Information on the CPA-7B?
?
Call (715) 386-4345 and select 455.
PABX/KSU station port.
Even the best designed paging systems can experience feedback. Now you can eliminate annoying feedback over your paging speakers with Viking’s model FBI-1A digital anti-feedback paging interface.
The FBI-1A utilizes state of the art digital recording technology to record the “live”
page from a phone system’s paging port output or unused trunk port. The FBI-1A
then immediately plays back the recorded page once or twice (selectable) over the
paging system.
?
Need More Information on the FBI-1A?
Call (715) 386-4345 and select 465.
Pages of up to 16 seconds (expandable to 60 seconds) can be stored and the FBI1A automatically adjusts to the page length for faster processing. In addition, the FBI1A can be programmed to provide pre-page and post-page alert tones.
The M15W is designed to add more paging power to almost any amplified paging
product, or it may be used as a primary paging amplifier.
Audio can be input from a 600 ohm source or from an 8-ohm amplified source. The
15 watt output can drive an eight to four ohm load, or two separate two-ohm loads,
which simplifies installation of up to eight 8-ohm speakers. Installation of up to 32
speakers is possible. A power adapter and
Need More Information on the M15W?
?
Call (715) 386-4345 and select 481.
one 25AE Paging Horn are included.
Product Support Line...715.386.8666
Fax Back Line...715.386.4345
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or
subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate
such changes.
Fax Back Doc 485
Printed in the U.S.A.
ZF301730 Rev B
Download PDF